From fd4daa9cea025ddf8623db289e79d264e9fa66f6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 27 Aug 2013 17:04:17 +0100 Subject: drm/i915: Track pfit enable state separately from size Detangle the additional state of whether or not the hw has the pfit enabled from whether it has zero size. This allows us to cleanly distinguish in the code when we expect the pfit to be enabled (for Haswell pc8), and when the BIOS is confused and needs sanitizing. Reported-by: shui yanwei Signed-off-by: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68251 Tested-by: shui yanwei Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2489d0b4c7d2..375e6a76a755 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2249,7 +2249,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, I915_WRITE(PIPESRC(intel_crtc->pipe), ((crtc->mode.hdisplay - 1) << 16) | (crtc->mode.vdisplay - 1)); - if (!intel_crtc->config.pch_pfit.size && + if (!intel_crtc->config.pch_pfit.enabled && (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { I915_WRITE(PF_CTL(intel_crtc->pipe), 0); @@ -3203,7 +3203,7 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; int pipe = crtc->pipe; - if (crtc->config.pch_pfit.size) { + if (crtc->config.pch_pfit.enabled) { /* Force use of hard-coded filter coefficients * as some pre-programmed values are broken, * e.g. x201. @@ -3428,7 +3428,7 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc) /* To avoid upsetting the power well on haswell only disable the pfit if * it's in use. The hw state code will make sure we get this right. */ - if (crtc->config.pch_pfit.size) { + if (crtc->config.pch_pfit.enabled) { I915_WRITE(PF_CTL(pipe), 0); I915_WRITE(PF_WIN_POS(pipe), 0); I915_WRITE(PF_WIN_SZ(pipe), 0); @@ -5859,6 +5859,7 @@ static void ironlake_get_pfit_config(struct intel_crtc *crtc, tmp = I915_READ(PF_CTL(crtc->pipe)); if (tmp & PF_ENABLE) { + pipe_config->pch_pfit.enabled = true; pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe)); pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe)); @@ -6236,7 +6237,7 @@ static void haswell_modeset_global_resources(struct drm_device *dev) if (!crtc->base.enabled) continue; - if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.size || + if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.enabled || crtc->config.cpu_transcoder != TRANSCODER_EDP) enable = true; } @@ -8205,9 +8206,10 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc, pipe_config->gmch_pfit.control, pipe_config->gmch_pfit.pgm_ratios, pipe_config->gmch_pfit.lvds_border_bits); - DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x\n", + DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n", pipe_config->pch_pfit.pos, - pipe_config->pch_pfit.size); + pipe_config->pch_pfit.size, + pipe_config->pch_pfit.enabled ? "enabled" : "disabled"); DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled); } @@ -8603,8 +8605,11 @@ intel_pipe_config_compare(struct drm_device *dev, if (INTEL_INFO(dev)->gen < 4) PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); - PIPE_CONF_CHECK_I(pch_pfit.pos); - PIPE_CONF_CHECK_I(pch_pfit.size); + PIPE_CONF_CHECK_I(pch_pfit.enabled); + if (current_config->pch_pfit.enabled) { + PIPE_CONF_CHECK_I(pch_pfit.pos); + PIPE_CONF_CHECK_I(pch_pfit.size); + } PIPE_CONF_CHECK_I(ips_enabled); -- cgit v1.2.3-59-g8ed1b From 7e7cb34f62dbb3471e4b1d3fae12a8b71e2224d9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Sep 2013 07:30:36 +0200 Subject: drm/i915: Use proper print format for debug prints Replace "%8x" with "%08x". The hex number should be shown with zero stuffed instead of spaces. Signed-off-by: Takashi Iwai Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 375e6a76a755..0d7c4f634bb9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6495,15 +6495,15 @@ static void haswell_write_eld(struct drm_connector *connector, /* Set ELD valid state */ tmp = I915_READ(aud_cntrl_st2); - DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp); + DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp); tmp |= (AUDIO_ELD_VALID_A << (pipe * 4)); I915_WRITE(aud_cntrl_st2, tmp); tmp = I915_READ(aud_cntrl_st2); - DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp); + DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp); /* Enable HDMI mode */ tmp = I915_READ(aud_config); - DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp); + DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp); /* clear N_programing_enable and N_value_index */ tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE); I915_WRITE(aud_config, tmp); -- cgit v1.2.3-59-g8ed1b From cc173961a68034c1171a421f0dbed39edfb60880 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 17 Sep 2013 18:33:43 +0300 Subject: drm/i915: do not update cursor in crtc mode set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The cursor is disabled before crtc mode set in crtc disable (and we assert this is the case), and enabled afterwards in crtc enable. Do not update it in crtc mode set. On HSW enabling a plane on a disabled pipe may hang the entire system. And there's no good reason for doing it ever, so just don't. v2: Add note about HSW hangs - vsyrjala Cc: stable@vger.kernel.org Suggested-by: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Tested-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0d7c4f634bb9..a38056d68dd8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4877,9 +4877,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, return -EINVAL; } - /* Ensure that the cursor is valid for the new mode before changing... */ - intel_crtc_update_cursor(crtc, true); - if (is_lvds && dev_priv->lvds_downclock_avail) { /* * Ensure we match the reduced clock's P to the target clock. @@ -5768,9 +5765,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->config.dpll.p2 = clock.p2; } - /* Ensure that the cursor is valid for the new mode before changing... */ - intel_crtc_update_cursor(crtc, true); - /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ if (intel_crtc->config.has_pch_encoder) { fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll); @@ -6260,9 +6254,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, if (!intel_ddi_pll_mode_set(crtc)) return -EINVAL; - /* Ensure that the cursor is valid for the new mode before changing... */ - intel_crtc_update_cursor(crtc, true); - if (intel_crtc->config.has_dp_encoder) intel_dp_set_m_n(intel_crtc); -- cgit v1.2.3-59-g8ed1b From f2f5f771c5fc0fa252cde3d0d0452dcc785cc17a Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 17 Sep 2013 18:33:44 +0300 Subject: drm/i915: Don't enable the cursor on a disable pipe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On HSW enabling a plane on a disabled pipe may hang the entire system. And there's no good reason for doing it ever, so just don't. v2: Move the crtc active checks to intel_crtc_cursor_{set,move} to avoid confusing people during modeset Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Tested-by: Paulo Zanoni Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a38056d68dd8..d8a1d98693e7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6929,7 +6929,8 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, intel_crtc->cursor_width = width; intel_crtc->cursor_height = height; - intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); + if (intel_crtc->active) + intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); return 0; fail_unpin: @@ -6948,7 +6949,8 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) intel_crtc->cursor_x = x; intel_crtc->cursor_y = y; - intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); + if (intel_crtc->active) + intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); return 0; } -- cgit v1.2.3-59-g8ed1b From 67c72a12254101d4e8d9b9f3a02646ba0be84a2d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 24 Sep 2013 11:46:14 +0200 Subject: drm/i915: preserve pipe A quirk in i9xx_set_pipeconf MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This regression has been introduced in commit 9f11a9e4e50006b615ba94722dfc33ced89664cf Author: Daniel Vetter Date: Thu Jun 13 00:54:58 2013 +0200 drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms Ville brough up the idea that this is just the pipe A quirk gone wrong. Note that after resume the bios might or might not have enabled pipe A already. We have a bit of magic to make sure that on resume we set up a decent mode for pipe A, but I fear if I just smash pipe A to always on we'd enable it in a bogus state and hang the hw. Hence the readback. v2: Clarify the logic a bit as suggested by Chris. Also amend the commit message to clarify why we don't unconditionally enable the pipe. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66462 References: https://lkml.org/lkml/2013/8/26/238 Cc: Meelis Roos Cc: Chris Wilson Cc: Ville Syrjälä Reviewed-by: Chris Wilson [danvet: Use |= instead of = as suggested by Chris.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d8a1d98693e7..e5822e79f912 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4775,6 +4775,10 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) pipeconf = 0; + if (dev_priv->quirks & QUIRK_PIPEA_FORCE && + I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE) + pipeconf |= PIPECONF_ENABLE; + if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. -- cgit v1.2.3-59-g8ed1b