From 3a75b24949a8d34d2014866006e30dc69dd567c8 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 20 Feb 2014 15:24:50 -0500 Subject: HID: hidraw: replace hid_output_raw_report() calls by appropriates ones Remove hid_output_raw_report() call as it is not a ll_driver callbacj, and switch to the hid_hw_* implementation. USB-HID used to fallback into SET_REPORT when there were no output interrupt endpoint, so emulating this if hid_hw_output_report() returns -ENOSYS. Reviewed-by: David Herrmann Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers/hid/hidraw.c') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index f8708c93f85c..2cc484c0017b 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -123,10 +123,6 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, dev = hidraw_table[minor]->hid; - if (!dev->hid_output_raw_report) { - ret = -ENODEV; - goto out; - } if (count > HID_MAX_BUFFER_SIZE) { hid_warn(dev, "pid %d passed too large report\n", @@ -153,7 +149,20 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, goto out_free; } - ret = hid_output_raw_report(dev, buf, count, report_type); + if (report_type == HID_OUTPUT_REPORT) { + ret = hid_hw_output_report(dev, buf, count); + /* + * compatibility with old implementation of USB-HID and I2C-HID: + * if the device does not support receiving output reports, + * on an interrupt endpoint, fallback to SET_REPORT HID command. + */ + if (ret != -ENOSYS) + goto out_free; + } + + ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type, + HID_REQ_SET_REPORT); + out_free: kfree(buf); out: -- cgit v1.2.3-59-g8ed1b