From 11d2a2ffa881c971bab065d6e38c33849f35e7bc Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Tue, 13 Jun 2017 18:45:13 -0500 Subject: remoteproc/keystone: Ensure the DSPs are in reset in probe The DSPs are expected to be in reset when the driver probes a device. If the DSPs are out of reset in probe, the system may crash when the firmware is being loaded. So, add a check to make sure the DSP resets are asserted, and if not, throw a eye-catchy warning and assert the resets specifically. Signed-off-by: Andrew F. Davis [s-anna@ti.com: replace warning with a WARN] Signed-off-by: Suman Anna Acked-by: Santosh Shilimkar Signed-off-by: Bjorn Andersson --- drivers/remoteproc/keystone_remoteproc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/remoteproc/keystone_remoteproc.c') diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c index 6e09ef76f7c7..5f776bfd674a 100644 --- a/drivers/remoteproc/keystone_remoteproc.c +++ b/drivers/remoteproc/keystone_remoteproc.c @@ -456,6 +456,16 @@ static int keystone_rproc_probe(struct platform_device *pdev) if (of_reserved_mem_device_init(dev)) dev_warn(dev, "device does not have specific CMA pool\n"); + /* ensure the DSP is in reset before loading firmware */ + ret = reset_control_status(ksproc->reset); + if (ret < 0) { + dev_err(dev, "failed to get reset status, status = %d\n", ret); + goto release_mem; + } else if (ret == 0) { + WARN(1, "device is not in reset\n"); + keystone_rproc_dsp_reset(ksproc); + } + ret = rproc_add(rproc); if (ret) { dev_err(dev, "failed to add register device with remoteproc core, status = %d\n", -- cgit v1.2.3-59-g8ed1b