From 5386a4e6c7fecd282d265a24d930a74ba3c5917b Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Mon, 6 May 2019 13:52:19 -0700 Subject: scsi: qla2xxx: Add cleanup for PCI EEH recovery During EEH error recovery testing it was discovered that driver's reset() callback partially frees resources used by driver, leaving some stale memory. After reset() is done and when resume() callback in driver uses old data which results into error leaving adapter disabled due to PCIe error. This patch does cleanup for EEH recovery code path and prevents adapter from getting disabled. Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 221 ++++++++++++++++-------------------------- 1 file changed, 82 insertions(+), 139 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e1c82a0a9745..172ef21827dd 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -6826,6 +6826,78 @@ qla2x00_release_firmware(void) mutex_unlock(&qla_fw_lock); } +static void qla_pci_error_cleanup(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); + struct qla_qpair *qpair = NULL; + struct scsi_qla_host *vp; + fc_port_t *fcport; + int i; + unsigned long flags; + + ha->chip_reset++; + + ha->base_qpair->chip_reset = ha->chip_reset; + for (i = 0; i < ha->max_qpairs; i++) { + if (ha->queue_pair_map[i]) + ha->queue_pair_map[i]->chip_reset = + ha->base_qpair->chip_reset; + } + + /* purge MBox commands */ + if (atomic_read(&ha->num_pend_mbx_stage3)) { + clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); + complete(&ha->mbx_intr_comp); + } + + i = 0; + + while (atomic_read(&ha->num_pend_mbx_stage3) || + atomic_read(&ha->num_pend_mbx_stage2) || + atomic_read(&ha->num_pend_mbx_stage1)) { + msleep(20); + i++; + if (i > 50) + break; + } + + ha->flags.purge_mbox = 0; + + mutex_lock(&ha->mq_lock); + list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) + qpair->online = 0; + mutex_unlock(&ha->mq_lock); + + qla2x00_mark_all_devices_lost(vha, 0); + + spin_lock_irqsave(&ha->vport_slock, flags); + list_for_each_entry(vp, &ha->vp_list, list) { + atomic_inc(&vp->vref_count); + spin_unlock_irqrestore(&ha->vport_slock, flags); + qla2x00_mark_all_devices_lost(vp, 0); + spin_lock_irqsave(&ha->vport_slock, flags); + atomic_dec(&vp->vref_count); + } + spin_unlock_irqrestore(&ha->vport_slock, flags); + + /* Clear all async request states across all VPs. */ + list_for_each_entry(fcport, &vha->vp_fcports, list) + fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); + + spin_lock_irqsave(&ha->vport_slock, flags); + list_for_each_entry(vp, &ha->vp_list, list) { + atomic_inc(&vp->vref_count); + spin_unlock_irqrestore(&ha->vport_slock, flags); + list_for_each_entry(fcport, &vp->vp_fcports, list) + fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); + spin_lock_irqsave(&ha->vport_slock, flags); + atomic_dec(&vp->vref_count); + } + spin_unlock_irqrestore(&ha->vport_slock, flags); +} + + static pci_ers_result_t qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -6851,20 +6923,7 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: ha->flags.eeh_busy = 1; - /* For ISP82XX complete any pending mailbox cmd */ - if (IS_QLA82XX(ha)) { - ha->flags.isp82xx_fw_hung = 1; - ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n"); - qla82xx_clear_pending_mbx(vha); - } - qla2x00_free_irqs(vha); - pci_disable_device(pdev); - /* Return back all IOs */ - qla2x00_abort_all_cmds(vha, DID_RESET << 16); - if (ql2xmqsupport || ql2xnvmeenable) { - set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags); - qla2xxx_wake_dpc(vha); - } + qla_pci_error_cleanup(vha); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: ha->flags.pci_channel_io_perm_failure = 1; @@ -6918,122 +6977,14 @@ qla2xxx_pci_mmio_enabled(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } -static uint32_t -qla82xx_error_recovery(scsi_qla_host_t *base_vha) -{ - uint32_t rval = QLA_FUNCTION_FAILED; - uint32_t drv_active = 0; - struct qla_hw_data *ha = base_vha->hw; - int fn; - struct pci_dev *other_pdev = NULL; - - ql_dbg(ql_dbg_aer, base_vha, 0x9006, - "Entered %s.\n", __func__); - - set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); - - if (base_vha->flags.online) { - /* Abort all outstanding commands, - * so as to be requeued later */ - qla2x00_abort_isp_cleanup(base_vha); - } - - - fn = PCI_FUNC(ha->pdev->devfn); - while (fn > 0) { - fn--; - ql_dbg(ql_dbg_aer, base_vha, 0x9007, - "Finding pci device at function = 0x%x.\n", fn); - other_pdev = - pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus), - ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn), - fn)); - - if (!other_pdev) - continue; - if (atomic_read(&other_pdev->enable_cnt)) { - ql_dbg(ql_dbg_aer, base_vha, 0x9008, - "Found PCI func available and enable at 0x%x.\n", - fn); - pci_dev_put(other_pdev); - break; - } - pci_dev_put(other_pdev); - } - - if (!fn) { - /* Reset owner */ - ql_dbg(ql_dbg_aer, base_vha, 0x9009, - "This devfn is reset owner = 0x%x.\n", - ha->pdev->devfn); - qla82xx_idc_lock(ha); - - qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, - QLA8XXX_DEV_INITIALIZING); - - qla82xx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, - QLA82XX_IDC_VERSION); - - drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); - ql_dbg(ql_dbg_aer, base_vha, 0x900a, - "drv_active = 0x%x.\n", drv_active); - - qla82xx_idc_unlock(ha); - /* Reset if device is not already reset - * drv_active would be 0 if a reset has already been done - */ - if (drv_active) - rval = qla82xx_start_firmware(base_vha); - else - rval = QLA_SUCCESS; - qla82xx_idc_lock(ha); - - if (rval != QLA_SUCCESS) { - ql_log(ql_log_info, base_vha, 0x900b, - "HW State: FAILED.\n"); - qla82xx_clear_drv_active(ha); - qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, - QLA8XXX_DEV_FAILED); - } else { - ql_log(ql_log_info, base_vha, 0x900c, - "HW State: READY.\n"); - qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, - QLA8XXX_DEV_READY); - qla82xx_idc_unlock(ha); - ha->flags.isp82xx_fw_hung = 0; - rval = qla82xx_restart_isp(base_vha); - qla82xx_idc_lock(ha); - /* Clear driver state register */ - qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0); - qla82xx_set_drv_active(base_vha); - } - qla82xx_idc_unlock(ha); - } else { - ql_dbg(ql_dbg_aer, base_vha, 0x900d, - "This devfn is not reset owner = 0x%x.\n", - ha->pdev->devfn); - if ((qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE) == - QLA8XXX_DEV_READY)) { - ha->flags.isp82xx_fw_hung = 0; - rval = qla82xx_restart_isp(base_vha); - qla82xx_idc_lock(ha); - qla82xx_set_drv_active(base_vha); - qla82xx_idc_unlock(ha); - } - } - clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); - - return rval; -} - static pci_ers_result_t qla2xxx_pci_slot_reset(struct pci_dev *pdev) { pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); struct qla_hw_data *ha = base_vha->hw; - struct rsp_que *rsp; - int rc, retries = 10; + int rc; + struct qla_qpair *qpair = NULL; ql_dbg(ql_dbg_aer, base_vha, 0x9004, "Slot Reset.\n"); @@ -7062,24 +7013,16 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) goto exit_slot_reset; } - rsp = ha->rsp_q_map[0]; - if (qla2x00_request_irqs(ha, rsp)) - goto exit_slot_reset; if (ha->isp_ops->pci_config(base_vha)) goto exit_slot_reset; - if (IS_QLA82XX(ha)) { - if (qla82xx_error_recovery(base_vha) == QLA_SUCCESS) { - ret = PCI_ERS_RESULT_RECOVERED; - goto exit_slot_reset; - } else - goto exit_slot_reset; - } - - while (ha->flags.mbox_busy && retries--) - msleep(1000); + mutex_lock(&ha->mq_lock); + list_for_each_entry(qpair, &base_vha->qp_list, qp_list_elem) + qpair->online = 1; + mutex_unlock(&ha->mq_lock); + base_vha->flags.online = 1; set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); if (ha->isp_ops->abort_isp(base_vha) == QLA_SUCCESS) ret = PCI_ERS_RESULT_RECOVERED; @@ -7103,13 +7046,13 @@ qla2xxx_pci_resume(struct pci_dev *pdev) ql_dbg(ql_dbg_aer, base_vha, 0x900f, "pci_resume.\n"); + ha->flags.eeh_busy = 0; + ret = qla2x00_wait_for_hba_online(base_vha); if (ret != QLA_SUCCESS) { ql_log(ql_log_fatal, base_vha, 0x9002, "The device failed to resume I/O from slot/link_reset.\n"); } - - ha->flags.eeh_busy = 0; } static void -- cgit v1.2.3-59-g8ed1b From c09581a52765a85f19fc35340127396d5e3379cc Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Sat, 20 Apr 2019 12:05:54 +0800 Subject: scsi: qedi: remove memset/memcpy to nfunc and use func instead KASAN reports this: BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi] Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429 CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x1c4/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 memcpy+0x1f/0x50 mm/kasan/common.c:130 qedi_dbg_err+0xda/0x330 [qedi] ? 0xffffffffc12d0000 qedi_init+0x118/0x1000 [qedi] ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003 RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 The buggy address belongs to the variable: __func__.67584+0x0/0xffffffffffffd520 [qedi] Memory state around the buggy address: ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa > ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa ^ ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa Currently the qedi_dbg_* family of functions can overrun the end of the source string if it is less than the destination buffer length because of the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc and just use func instead as it is always a null terminated string. Reported-by: Hulk Robot Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: YueHaibing Reviewed-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_dbg.c | 32 ++++++++------------------------ 1 file changed, 8 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qedi/qedi_dbg.c b/drivers/scsi/qedi/qedi_dbg.c index 8fd28b056f73..3383314a3882 100644 --- a/drivers/scsi/qedi/qedi_dbg.c +++ b/drivers/scsi/qedi/qedi_dbg.c @@ -16,10 +16,6 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line, { va_list va; struct va_format vaf; - char nfunc[32]; - - memset(nfunc, 0, sizeof(nfunc)); - memcpy(nfunc, func, sizeof(nfunc) - 1); va_start(va, fmt); @@ -28,9 +24,9 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line, if (likely(qedi) && likely(qedi->pdev)) pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev), - nfunc, line, qedi->host_no, &vaf); + func, line, qedi->host_no, &vaf); else - pr_err("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf); + pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); va_end(va); } @@ -41,10 +37,6 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line, { va_list va; struct va_format vaf; - char nfunc[32]; - - memset(nfunc, 0, sizeof(nfunc)); - memcpy(nfunc, func, sizeof(nfunc) - 1); va_start(va, fmt); @@ -56,9 +48,9 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line, if (likely(qedi) && likely(qedi->pdev)) pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev), - nfunc, line, qedi->host_no, &vaf); + func, line, qedi->host_no, &vaf); else - pr_warn("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf); + pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); ret: va_end(va); @@ -70,10 +62,6 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line, { va_list va; struct va_format vaf; - char nfunc[32]; - - memset(nfunc, 0, sizeof(nfunc)); - memcpy(nfunc, func, sizeof(nfunc) - 1); va_start(va, fmt); @@ -85,10 +73,10 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line, if (likely(qedi) && likely(qedi->pdev)) pr_notice("[%s]:[%s:%d]:%d: %pV", - dev_name(&qedi->pdev->dev), nfunc, line, + dev_name(&qedi->pdev->dev), func, line, qedi->host_no, &vaf); else - pr_notice("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf); + pr_notice("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); ret: va_end(va); @@ -100,10 +88,6 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line, { va_list va; struct va_format vaf; - char nfunc[32]; - - memset(nfunc, 0, sizeof(nfunc)); - memcpy(nfunc, func, sizeof(nfunc) - 1); va_start(va, fmt); @@ -115,9 +99,9 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line, if (likely(qedi) && likely(qedi->pdev)) pr_info("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev), - nfunc, line, qedi->host_no, &vaf); + func, line, qedi->host_no, &vaf); else - pr_info("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf); + pr_info("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); ret: va_end(va); -- cgit v1.2.3-59-g8ed1b From d0adee5d12752256ff0c87ad7f002f21fe49d618 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 24 Apr 2019 16:02:56 +0800 Subject: scsi: qedi: remove set but not used variables 'cdev' and 'udev' Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect': drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable] drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable] These have never been used since introduction. Signed-off-by: YueHaibing Acked-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_iscsi.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 615cea4fad56..82153c808b40 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -809,8 +809,6 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, struct qedi_endpoint *qedi_ep; struct sockaddr_in *addr; struct sockaddr_in6 *addr6; - struct qed_dev *cdev = NULL; - struct qedi_uio_dev *udev = NULL; struct iscsi_path path_req; u32 msg_type = ISCSI_KEVENT_IF_DOWN; u32 iscsi_cid = QEDI_CID_RESERVED; @@ -830,8 +828,6 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, } qedi = iscsi_host_priv(shost); - cdev = qedi->cdev; - udev = qedi->udev; if (test_bit(QEDI_IN_OFFLINE, &qedi->flags) || test_bit(QEDI_IN_RECOVERY, &qedi->flags)) { -- cgit v1.2.3-59-g8ed1b From e2a8be5696e706a2fce6edd11e5c74ce14cffec0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 May 2019 17:26:47 -0700 Subject: scsi: lpfc: resolve lockdep warnings There were a number of erroneous comments and incorrect older lockdep checks that were causing a number of warnings. Resolve the following: - Inconsistent lock state warnings in lpfc_nvme_info_show(). - Fixed comments and code on sequences where ring lock is now held instead of hbalock. - Reworked calling sequences around lpfc_sli_iocbq_lookup(). Rather than locking prior to the routine and have routine guess on what lock, take the lock within the routine. The lockdep check becomes unnecessary. - Fixed comments and removed erroneous hbalock checks. Signed-off-by: Dick Kennedy Signed-off-by: James Smart CC: Bart Van Assche Tested-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 5 +-- drivers/scsi/lpfc/lpfc_sli.c | 84 +++++++++++++++++++++++++++---------------- 2 files changed, 56 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e9adb3f1961d..31b963ae7289 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -176,6 +176,7 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, int i; int len = 0; char tmp[LPFC_MAX_NVME_INFO_TMP_LEN] = {0}; + unsigned long iflags = 0; if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) { len = scnprintf(buf, PAGE_SIZE, "NVME Disabled\n"); @@ -374,11 +375,11 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { nrport = NULL; - spin_lock(&vport->phba->hbalock); + spin_lock_irqsave(&vport->phba->hbalock, iflags); rport = lpfc_ndlp_get_nrport(ndlp); if (rport) nrport = rport->remoteport; - spin_unlock(&vport->phba->hbalock); + spin_unlock_irqrestore(&vport->phba->hbalock, iflags); if (!nrport) continue; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 2acda188b0dc..d1512e4f9791 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -991,15 +991,14 @@ lpfc_cleanup_vports_rrqs(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) * @ndlp: Targets nodelist pointer for this exchange. * @xritag the xri in the bitmap to test. * - * This function is called with hbalock held. This function - * returns 0 = rrq not active for this xri - * 1 = rrq is valid for this xri. + * This function returns: + * 0 = rrq not active for this xri + * 1 = rrq is valid for this xri. **/ int lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, uint16_t xritag) { - lockdep_assert_held(&phba->hbalock); if (!ndlp) return 0; if (!ndlp->active_rrqs_xri_bitmap) @@ -1102,10 +1101,11 @@ out: * @phba: Pointer to HBA context object. * @piocb: Pointer to the iocbq. * - * This function is called with the ring lock held. This function - * gets a new driver sglq object from the sglq list. If the - * list is not empty then it is successful, it returns pointer to the newly - * allocated sglq object else it returns NULL. + * The driver calls this function with either the nvme ls ring lock + * or the fc els ring lock held depending on the iocb usage. This function + * gets a new driver sglq object from the sglq list. If the list is not empty + * then it is successful, it returns pointer to the newly allocated sglq + * object else it returns NULL. **/ static struct lpfc_sglq * __lpfc_sli_get_els_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) @@ -1115,9 +1115,15 @@ __lpfc_sli_get_els_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) struct lpfc_sglq *start_sglq = NULL; struct lpfc_io_buf *lpfc_cmd; struct lpfc_nodelist *ndlp; + struct lpfc_sli_ring *pring = NULL; int found = 0; - lockdep_assert_held(&phba->hbalock); + if (piocbq->iocb_flag & LPFC_IO_NVME_LS) + pring = phba->sli4_hba.nvmels_wq->pring; + else + pring = lpfc_phba_elsring(phba); + + lockdep_assert_held(&pring->ring_lock); if (piocbq->iocb_flag & LPFC_IO_FCP) { lpfc_cmd = (struct lpfc_io_buf *) piocbq->context1; @@ -1560,7 +1566,8 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to the driver iocb object. * - * This function is called with hbalock held. The function adds the + * The driver calls this function with the hbalock held for SLI3 ports or + * the ring lock held for SLI4 ports. The function adds the * new iocb to txcmplq of the given ring. This function always returns * 0. If this function is called for ELS ring, this function checks if * there is a vport associated with the ELS command. This function also @@ -1570,7 +1577,10 @@ static int lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb) { - lockdep_assert_held(&phba->hbalock); + if (phba->sli_rev == LPFC_SLI_REV4) + lockdep_assert_held(&pring->ring_lock); + else + lockdep_assert_held(&phba->hbalock); BUG_ON(!piocb); @@ -2967,8 +2977,8 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * * This function looks up the iocb_lookup table to get the command iocb * corresponding to the given response iocb using the iotag of the - * response iocb. This function is called with the hbalock held - * for sli3 devices or the ring_lock for sli4 devices. + * response iocb. The driver calls this function with the hbalock held + * for SLI3 ports or the ring lock held for SLI4 ports. * This function returns the command iocb object if it finds the command * iocb else returns NULL. **/ @@ -2979,8 +2989,15 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, { struct lpfc_iocbq *cmd_iocb = NULL; uint16_t iotag; - lockdep_assert_held(&phba->hbalock); + spinlock_t *temp_lock = NULL; + unsigned long iflag = 0; + if (phba->sli_rev == LPFC_SLI_REV4) + temp_lock = &pring->ring_lock; + else + temp_lock = &phba->hbalock; + + spin_lock_irqsave(temp_lock, iflag); iotag = prspiocb->iocb.ulpIoTag; if (iotag != 0 && iotag <= phba->sli.last_iotag) { @@ -2990,10 +3007,12 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, list_del_init(&cmd_iocb->list); cmd_iocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ; pring->txcmplq_cnt--; + spin_unlock_irqrestore(temp_lock, iflag); return cmd_iocb; } } + spin_unlock_irqrestore(temp_lock, iflag); lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0317 iotag x%x is out of " "range: max iotag x%x wd0 x%x\n", @@ -3009,8 +3028,8 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, * @iotag: IOCB tag. * * This function looks up the iocb_lookup table to get the command iocb - * corresponding to the given iotag. This function is called with the - * hbalock held. + * corresponding to the given iotag. The driver calls this function with + * the ring lock held because this function is an SLI4 port only helper. * This function returns the command iocb object if it finds the command * iocb else returns NULL. **/ @@ -3019,8 +3038,15 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint16_t iotag) { struct lpfc_iocbq *cmd_iocb = NULL; + spinlock_t *temp_lock = NULL; + unsigned long iflag = 0; - lockdep_assert_held(&phba->hbalock); + if (phba->sli_rev == LPFC_SLI_REV4) + temp_lock = &pring->ring_lock; + else + temp_lock = &phba->hbalock; + + spin_lock_irqsave(temp_lock, iflag); if (iotag != 0 && iotag <= phba->sli.last_iotag) { cmd_iocb = phba->sli.iocbq_lookup[iotag]; if (cmd_iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ) { @@ -3028,10 +3054,12 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba, list_del_init(&cmd_iocb->list); cmd_iocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ; pring->txcmplq_cnt--; + spin_unlock_irqrestore(temp_lock, iflag); return cmd_iocb; } } + spin_unlock_irqrestore(temp_lock, iflag); lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0372 iotag x%x lookup error: max iotag (x%x) " "iocb_flag x%x\n", @@ -3065,17 +3093,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int rc = 1; unsigned long iflag; - /* Based on the iotag field, get the cmd IOCB from the txcmplq */ - if (phba->sli_rev == LPFC_SLI_REV4) - spin_lock_irqsave(&pring->ring_lock, iflag); - else - spin_lock_irqsave(&phba->hbalock, iflag); cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq); - if (phba->sli_rev == LPFC_SLI_REV4) - spin_unlock_irqrestore(&pring->ring_lock, iflag); - else - spin_unlock_irqrestore(&phba->hbalock, iflag); - if (cmdiocbp) { if (cmdiocbp->iocb_cmpl) { /* @@ -3406,8 +3424,10 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, break; } + spin_unlock_irqrestore(&phba->hbalock, iflag); cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring, &rspiocbq); + spin_lock_irqsave(&phba->hbalock, iflag); if (unlikely(!cmdiocbq)) break; if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED) @@ -3601,9 +3621,12 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, case LPFC_ABORT_IOCB: cmdiocbp = NULL; - if (irsp->ulpCommand != CMD_XRI_ABORTED_CX) + if (irsp->ulpCommand != CMD_XRI_ABORTED_CX) { + spin_unlock_irqrestore(&phba->hbalock, iflag); cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq); + spin_lock_irqsave(&phba->hbalock, iflag); + } if (cmdiocbp) { /* Call the specified completion routine */ if (cmdiocbp->iocb_cmpl) { @@ -12976,13 +12999,11 @@ lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *phba, return NULL; wcqe = &irspiocbq->cq_event.cqe.wcqe_cmpl; - spin_lock_irqsave(&pring->ring_lock, iflags); pring->stats.iocb_event++; /* Look up the ELS command IOCB and create pseudo response IOCB */ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring, bf_get(lpfc_wcqe_c_request_tag, wcqe)); if (unlikely(!cmdiocbq)) { - spin_unlock_irqrestore(&pring->ring_lock, iflags); lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0386 ELS complete with no corresponding " "cmdiocb: 0x%x 0x%x 0x%x 0x%x\n", @@ -12992,6 +13013,7 @@ lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *phba, return NULL; } + spin_lock_irqsave(&pring->ring_lock, iflags); /* Put the iocb back on the txcmplq */ lpfc_sli_ringtxcmpl_put(phba, pring, cmdiocbq); spin_unlock_irqrestore(&pring->ring_lock, iflags); @@ -13762,9 +13784,9 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq, /* Look up the FCP command IOCB and create pseudo response IOCB */ spin_lock_irqsave(&pring->ring_lock, iflags); pring->stats.iocb_event++; + spin_unlock_irqrestore(&pring->ring_lock, iflags); cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring, bf_get(lpfc_wcqe_c_request_tag, wcqe)); - spin_unlock_irqrestore(&pring->ring_lock, iflags); if (unlikely(!cmdiocbq)) { lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0374 FCP complete with no corresponding " -- cgit v1.2.3-59-g8ed1b From 79080d349f7f58a2e86c56043a3d04184d5f294a Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 May 2019 17:26:48 -0700 Subject: scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show Many of the exit cases were not releasing the rcu read lock. Corrected the exit paths. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Tested-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 31b963ae7289..d4c65e2109e2 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -355,7 +355,7 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, phba->sli4_hba.io_xri_max, lpfc_sli4_get_els_iocb_cnt(phba)); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; /* Port state is only one of two values for now. */ if (localport->port_id) @@ -371,7 +371,7 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, wwn_to_u64(vport->fc_nodename.u.wwn), localport->port_id, statep); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { nrport = NULL; @@ -398,39 +398,39 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, /* Tab in to show lport ownership. */ if (strlcat(buf, "NVME RPORT ", PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; if (phba->brd_no >= 10) { if (strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } scnprintf(tmp, sizeof(tmp), "WWPN x%llx ", nrport->port_name); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; scnprintf(tmp, sizeof(tmp), "WWNN x%llx ", nrport->node_name); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; scnprintf(tmp, sizeof(tmp), "DID x%06x ", nrport->port_id); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; /* An NVME rport can have multiple roles. */ if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) { if (strlcat(buf, "INITIATOR ", PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET) { if (strlcat(buf, "TARGET ", PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY) { if (strlcat(buf, "DISCSRVC ", PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR | FC_PORT_ROLE_NVME_TARGET | @@ -438,12 +438,12 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, scnprintf(tmp, sizeof(tmp), "UNKNOWN ROLE x%x", nrport->port_role); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } scnprintf(tmp, sizeof(tmp), "%s\n", statep); if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) - goto buffer_done; + goto rcu_unlock_buf_done; } rcu_read_unlock(); @@ -505,7 +505,13 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, atomic_read(&lport->cmpl_fcp_err)); strlcat(buf, tmp, PAGE_SIZE); -buffer_done: + /* RCU is already unlocked. */ + goto buffer_done; + + rcu_unlock_buf_done: + rcu_read_unlock(); + + buffer_done: len = strnlen(buf, PAGE_SIZE); if (unlikely(len >= (PAGE_SIZE - 1))) { -- cgit v1.2.3-59-g8ed1b From c8cb261a072c88ca1aff0e804a30db4c7606521b Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 May 2019 17:26:49 -0700 Subject: scsi: lpfc: add check for loss of ndlp when sending RRQ There was a missing qualification of a valid ndlp structure when calling to send an RRQ for an abort. Add the check. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Tested-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index c8fb0b455f2a..5ac4f8d76b91 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -7334,7 +7334,10 @@ int lpfc_send_rrq(struct lpfc_hba *phba, struct lpfc_node_rrq *rrq) { struct lpfc_nodelist *ndlp = lpfc_findnode_did(rrq->vport, - rrq->nlp_DID); + rrq->nlp_DID); + if (!ndlp) + return 1; + if (lpfc_test_rrq_active(phba, ndlp, rrq->xritag)) return lpfc_issue_els_rrq(rrq->vport, ndlp, rrq->nlp_DID, rrq); -- cgit v1.2.3-59-g8ed1b From 69b9c52ca5c052b807a69712a9ee1d6f085bcb4f Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 May 2019 17:26:50 -0700 Subject: scsi: lpfc: Update lpfc version to 12.2.0.2 Due to the couple of bug fixes, update lpfc version to 12.2.0.2 Signed-off-by: Dick Kennedy Signed-off-by: James Smart Tested-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index f7d9ef428417..220a932fe943 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -20,7 +20,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "12.2.0.1" +#define LPFC_DRIVER_VERSION "12.2.0.2" #define LPFC_DRIVER_NAME "lpfc" /* Used for SLI 2/3 */ -- cgit v1.2.3-59-g8ed1b From 41552199b5518fe26bee0829a28dd1880441b430 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 9 May 2019 23:22:47 +0800 Subject: scsi: myrs: Fix uninitialized variable drivers/scsi/myrs.c: In function 'myrs_log_event': drivers/scsi/myrs.c:821:24: warning: 'sshdr.sense_key' may be used uninitialized in this function [-Wmaybe-uninitialized] struct scsi_sense_hdr sshdr; If ev->ev_code is not 0x1C, sshdr.sense_key may be used uninitialized. Fix this by initializing variable 'sshdr' to 0. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Signed-off-by: YueHaibing Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/myrs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c index b8d54ef8cf6d..eb0dd566330a 100644 --- a/drivers/scsi/myrs.c +++ b/drivers/scsi/myrs.c @@ -818,7 +818,7 @@ static void myrs_log_event(struct myrs_hba *cs, struct myrs_event *ev) unsigned char ev_type, *ev_msg; struct Scsi_Host *shost = cs->host; struct scsi_device *sdev; - struct scsi_sense_hdr sshdr; + struct scsi_sense_hdr sshdr = {0}; unsigned char sense_info[4]; unsigned char cmd_specific[4]; -- cgit v1.2.3-59-g8ed1b From 8ef860ae55e96c9e8999a12c800d9fd1a91f66d7 Mon Sep 17 00:00:00 2001 From: Erwan Velu Date: Thu, 21 Mar 2019 10:49:27 +0100 Subject: scsi: smartpqi: Reporting unhandled SCSI errors When a HARDWARE_ERROR is triggered for ASC=0x3e, the existing code is only considering the case where ASCQ=0x1. According to the http://www.t10.org/lists/asc-num.htm#ASC_3E specification, other values may occur like a timeout (ASCQ=0x2). This patch prints an error message when a non-handled message is received. This can help diagnose a possible misbehavior of the controller or a missing implementation in the Linux kernel. This patch keeps the exact same error handling but prints a message if an ASCQ != 1 is reported. [mkp: clarified commit message] Signed-off-by: Erwan Velu Acked-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/scsi/smartpqi/smartpqi_init.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index c26cac819f9e..b17761eafca9 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -2755,16 +2755,25 @@ static void pqi_process_raid_io_error(struct pqi_io_request *io_request) scsi_normalize_sense(error_info->data, sense_data_length, &sshdr) && sshdr.sense_key == HARDWARE_ERROR && - sshdr.asc == 0x3e && - sshdr.ascq == 0x1) { + sshdr.asc == 0x3e) { struct pqi_ctrl_info *ctrl_info = shost_to_hba(scmd->device->host); struct pqi_scsi_dev *device = scmd->device->hostdata; - if (printk_ratelimit()) - scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n", - ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun); - pqi_take_device_offline(scmd->device, "RAID"); - host_byte = DID_NO_CONNECT; + switch (sshdr.ascq) { + case 0x1: /* LOGICAL UNIT FAILURE */ + if (printk_ratelimit()) + scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n", + ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun); + pqi_take_device_offline(scmd->device, "RAID"); + host_byte = DID_NO_CONNECT; + break; + + default: /* See http://www.t10.org/lists/asc-num.htm#ASC_3E */ + if (printk_ratelimit()) + scmd_printk(KERN_ERR, scmd, "received unhandled error %d from controller for scsi %d:%d:%d:%d\n", + sshdr.ascq, ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun); + break; + } } if (sense_data_length > SCSI_SENSE_BUFFERSIZE) -- cgit v1.2.3-59-g8ed1b From d0c0d902339249c75da85fd9257a86cbb98dfaa5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 4 May 2019 17:48:29 +0100 Subject: scsi: bnx2fc: fix incorrect cast to u64 on shift operation Currently an int is being shifted and the result is being cast to a u64 which leads to undefined behaviour if the shift is more than 31 bits. Fix this by casting the integer value 1 to u64 before the shift operation. Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King Acked-by: Saurav Kashyap Signed-off-by: Martin K. Petersen --- drivers/scsi/bnx2fc/bnx2fc_hwi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c index 039328d9ef13..30e6d78e82f0 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c +++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c @@ -830,7 +830,7 @@ ret_err_rqe: ((u64)err_entry->data.err_warn_bitmap_hi << 32) | (u64)err_entry->data.err_warn_bitmap_lo; for (i = 0; i < BNX2FC_NUM_ERR_BITS; i++) { - if (err_warn_bit_map & (u64) (1 << i)) { + if (err_warn_bit_map & ((u64)1 << i)) { err_warn = i; break; } -- cgit v1.2.3-59-g8ed1b From 8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 20 May 2019 10:57:18 -0400 Subject: Revert "scsi: sd: Keep disk read-only when re-reading partition" This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 2b2bc4b49d78..b894786df6c2 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2603,7 +2603,6 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) int res; struct scsi_device *sdp = sdkp->device; struct scsi_mode_data data; - int disk_ro = get_disk_ro(sdkp->disk); int old_wp = sdkp->write_prot; set_disk_ro(sdkp->disk, 0); @@ -2644,7 +2643,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) "Test WP failed, assume Write Enabled\n"); } else { sdkp->write_prot = ((data.device_specific & 0x80) != 0); - set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro); + set_disk_ro(sdkp->disk, sdkp->write_prot); if (sdkp->first_scan || old_wp != sdkp->write_prot) { sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", sdkp->write_prot ? "on" : "off"); -- cgit v1.2.3-59-g8ed1b