From 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 23 Nov 2023 09:14:53 +0800 Subject: ASoC: fsl_xcvr: refine the requested phy clock frequency As the input phy clock frequency will divided by 2 by default on i.MX8MP with the implementation of clk-imx8mp-audiomix driver, So the requested frequency need to be updated. The relation of phy clock is: sai_pll_ref_sel sai_pll sai_pll_bypass sai_pll_out sai_pll_out_div2 earc_phy_cg Signed-off-by: Shengjiu Wang Reviewed-by: Iuliana Prodan Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc/fsl') diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 77f8e2394bf9..f0fb33d719c2 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) struct device *dev = &xcvr->pdev->dev; int ret; - freq = xcvr->soc_data->spdif_only ? freq / 10 : freq; + freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) { @@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u32 m_ctl = 0, v_ctl = 0; u32 r = substream->runtime->rate, ch = substream->runtime->channels; - u32 fout = 32 * r * ch * 10 * 2; + u32 fout = 32 * r * ch * 10; int ret = 0; switch (xcvr->mode) { -- cgit v1.2.3-59-g8ed1b