// SPDX-License-Identifier: GPL-2.0-or-later /* * AppliedMicro X-Gene SoC SATA Host Controller Driver * * Copyright (c) 2014, Applied Micro Circuits Corporation * Author: Loc Ho * Tuan Phan * Suman Tripathi * * NOTE: PM support is not currently available. */ #include #include #include #include #include #include #include "ahci.h" #define DRV_NAME "xgene-ahci" /* Max # of disk per a controller */ #define MAX_AHCI_CHN_PERCTR 2 /* MUX CSR */ #define SATA_ENET_CONFIG_REG 0x00000000 #define CFG_SATA_ENET_SELECT_MASK 0x00000001 /* SATA core host controller CSR */ #define SLVRDERRATTRIBUTES 0x00000000 #define SLVWRERRATTRIBUTES 0x00000004 #define MSTRDERRATTRIBUTES 0x00000008 #define MSTWRERRATTRIBUTES 0x0000000c #define BUSCTLREG 0x00000014 #define IOFMSTRWAUX 0x00000018 #define INTSTATUSMASK 0x0000002c #define ERRINTSTATUS 0x00000030 #define ERRINTSTATUSMASK 0x00000034 /* SATA host AHCI CSR */ #define PORTCFG 0x000000a4 #define PORTADDR_SET(dst, src) \ (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) #define PORTPHY1CFG 0x000000a8 #define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) #define PORTPHY2CFG 0x000000ac #define PORTPHY3CFG 0x000000b0 #define PORTPHY4CFG 0x000000b4 #define PORTPHY5CFG 0x000000b8 #define SCTL0 0x0000012C #define PORTPHY5CFG_RTCHG_SET(dst, src) \ (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) #define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) #define PORTAXICFG 0x000000bc #define PORTAXICFG_OUTTRANS_SET(dst, src) \ (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) #define PORTRANSCFG 0x000000c8 #define PORTRANSCFG_RXWM_SET(dst, src) \ (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) /* SATA host controller AXI CSR */ #define INT_SLV_TMOMASK 0x00000010 /* SATA diagnostic CSR */ #define CFG_MEM_RAM_SHUTDOWN 0x00000070 #define BLOCK_MEM_RDY 0x00000074 /* Max retry for link down */ #define MAX_LINK_DOWN_RETRY 3 enum xgene_ahci_version { XGENE_AHCI_V1 = 1, XGENE_AHCI_V2, }; struct xgene_ahci_context { struct ahci_host_priv *hpriv; struct device *dev; u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ void __iomem *csr_core; /* Core CSR address of IP */ void __iomem *csr_diag; /* Diag CSR address of IP */ void __iomem *csr_axi; /* AXI CSR address of IP */ void __iomem *csr_mux; /* MUX CSR address of IP */ }; static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) { dev_dbg(ctx->dev, "Release memory from shutdown\n"); writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ msleep(1); /* reset may take up to 1ms */ if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { dev_err(ctx->dev, "failed to release memory from shutdown\n"); return -ENODEV; } return 0; } /** * xgene_ahci_poll_reg_val- Poll a register on a specific value. * @ap : ATA port of interest. * @reg : Register of interest. * @val : Value to be attained. * @interval : waiting interval for polling. * @timeout : timeout for achieving the value. */ static int xgene_ahci_poll_reg_val(struct ata_port *ap, void __iomem *reg, unsigned int val, unsigned int interval, unsigned int timeout) { unsigned long deadline; unsigned int tmp; tmp = ioread32(reg); deadline = ata_deadline(jiffies, timeout); while (tmp != val && time_before(jiffies, deadline)) { ata_msleep(ap, interval); tmp = ioread32(reg); } return tmp; } /** * xgene_ahci_restart_engine - Restart the dma engine. * @ap : ATA port of interest * * Waits for completion of multiple commands and restarts * the DMA engine inside the controller. */ static int xgene_ahci_restart_engine(struct ata_port *ap) { struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_port_priv *pp = ap->private_data; void __iomem *port_mmio = ahci_port_base(ap); u32 fbs; /* * In case of PMP multiple IDENTIFY DEVICE commands can be * issued inside PxCI. So need to poll PxCI for the * completion of outstanding IDENTIFY DEVICE commands before * we restart the DMA engine. */ if (xgene_ahci_poll_reg_val(ap, port_mmio + PORT_CMD_ISSUE, 0x0, 1, 100)) return -EBUSY; hpriv->stop_engine(ap); ahci_start_fis_rx(ap); /* * Enable the PxFBS.FBS_EN bit as it * gets cleared due to stopping the engine. */ if (pp->fbs_supported) { fbs = readl(port_mmio + PORT_FBS); writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); fbs = readl(port_mmio + PORT_FBS); } hpriv->start_engine(ap); return 0; } /** * xgene_ahci_qc_issue - Issue commands to the device * @qc: Command to issue * * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot * clear the BSY bit after receiving the PIO setup FIS. This results in the dma * state machine goes into the CMFatalErrorUpdate state and locks up. By * restarting the dma engine, it removes the controller out of lock up state. * * Due to H/W errata, the controller is unable to save the PMP * field fetched from command header before sending the H2D FIS. * When the device returns the PMP port field in the D2H FIS, there is * a mismatch and results in command completion failure. The * workaround is to write the pmp value to PxFBS.DEV field before issuing * any command to PMP. */ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ahci_host_priv *hpriv = ap->host->private_data; struct xgene_ahci_context *ctx = hpriv->plat_data; int rc = 0; u32 port_fbs; void __iomem *port_mmio = ahci_port_base(ap); /* * Write the pmp value to PxFBS.DEV * for case of Port Mulitplier. */ if (ctx->class[ap->port_no] == ATA_DEV_PMP) { port_fbs = readl(port_mmio + PORT_FBS); port_fbs &= ~PORT_FBS_DEV_MASK; port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; writel(port_fbs, port_mmio + PORT_FBS); } if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) xgene_ahci_restart_engine(ap); rc = ahci_qc_issue(qc); /* Save the last command issued */ ctx->last_cmd[ap->port_no] = qc->tf.command; return rc; } static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) { void __iomem *diagcsr = ctx->csr_diag; return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); } /** * xgene_ahci_read_id - Read ID data from the specified device * @dev: device * @tf: proposed taskfile * @id: data buffer * * This custom read ID function is required due to the fact that the HW * does not support DEVSLP. */ static unsigned int xgene_ahci_read_id(struct ata_device *dev, struct ata_taskfile *tf, __le16 *id) { u32 err_mask; err_mask = ata_do_dev_read_id(dev, tf, id); if (err_mask) return err_mask; /* * Mask reserved area. Word78 spec of Link Power Management * bit15-8: reserved * bit7: NCQ autosence * bit6: Software settings preservation supported * bit5: reserved * bit4: In-order sata delivery supported * bit3: DIPM requests supported * bit2: DMA Setup FIS Auto-Activate optimization supported * bit1: DMA Setup FIX non-Zero buffer offsets supported * bit0: Reserved * * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP */ id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); return 0; } static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) { void __iomem *mmio = ctx->hpriv->mmio; u32 val; dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", mmio, channel); val = readl(mmio + PORTCFG); val = PORTADDR_SET(val, channel == 0 ? 2 : 3); writel(val, mmio + PORTCFG); readl(mmio + PORTCFG); /* Force a barrier */ /* Disable fix rate */ writel(0x0001fffe, mmio + PORTPHY1CFG); readl(mmio + PORTPHY1CFG); /* Force a barrier */ writel(0x28183219, mmio + PORTPHY2CFG); readl(mmio + PORTPHY2CFG); /* Force a barrier */ writel(0x13081008, mmio + PORTPHY3CFG); readl(mmio + PORTPHY3CFG); /* Force a barrier */ writel(0x00480815, mmio + PORTPHY4CFG); readl(mmio + PORTPHY4CFG); /* Force a barrier */ /* Set window negotiation */ val = readl(mmio + PORTPHY5CFG); val = PORTPHY5CFG_RTCHG_SET(val, 0x300); writel(val, mmio + PORTPHY5CFG); readl(mmio + PORTPHY5CFG); /* Force a barrier */ val = readl(mmio + PORTAXICFG); val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ writel(val, mmio + PORTAXICFG); readl(mmio + PORTAXICFG); /* Force a barrier */ /* Set the watermark threshold of the receive FIFO */ val = readl(mmio + PORTRANSCFG); val = PORTRANSCFG_RXWM_SET(val, 0x30); writel(val, mmio + PORTRANSCFG); } /** * xgene_ahci_do_hardreset - Issue the actual COMRESET * @link: link to reset * @deadline: deadline jiffies for the operation * @online: Return value to indicate if device online * * Due to the limitation of the hardware PHY, a difference set of setting is * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will * report disparity error and etc. In addition, during COMRESET, there can * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long * reboot cycle regression, sometimes the PHY reports link down even if the * device is present because of speed negotiation failure. so need to retry * the COMRESET to get the link up. The following algorithm is followed to * proper configure the hardware PHY during COMRESET: * * Alg Part 1: * 1. Start the PHY at Gen3 speed (default setting) * 2. Issue the COMRESET * 3. If no link, go to Alg Part 3 * 4. If link up, determine if the negotiated speed matches the PHY * configured speed * 5. If they matched, go to Alg Part 2 * 6. If they do not matched and first time, configure the PHY for the linked * up disk speed and repeat step 2 * 7. Go to Alg Part 2 * * Alg Part 2: * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error * reported in the register PORT_SCR_ERR, then reset the PHY receiver line * 2. Go to Alg Part 4 * * Alg Part 3: * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY * communication establishment failed and maximum link down attempts are * less than Max attempts 3 then goto Alg Part 1. * 2. Go to Alg Part 4. * * Alg Part 4: * 1. Clear any pending from register PORT_SCR_ERR. * * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition * and until the underlying PHY supports an method to reset the receiver * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, * an warning message will be printed. */ static int xgene_ahci_do_hardreset(struct ata_link *link, unsigned long deadline, bool *online) { const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context); struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; struct xgene_ahci_context *ctx = hpriv->plat_data; struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; void __iomem *port_mmio = ahci_port_base(ap); struct ata_taskfile tf; int link_down_retry = 0; int rc; u32 val, sstatus; do { /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); tf.status = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis); rc = sata_link_hardreset(link, timing, deadline, online, ahci_check_ready); if (*online) { val = readl(port_mmio + PORT_SCR_ERR); if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) dev_warn(ctx->dev, "link has error\n"); break; } sata_scr_read(link, SCR_STATUS, &sstatus); } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && (sstatus & 0xff) == 0x1); /* clear all errors if any pending */ val = readl(port_mmio + PORT_SCR_ERR); writel(val, port_mmio + PORT_SCR_ERR); return rc; } static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = ahci_port_base(ap); bool online; int rc; u32 portcmd_saved; u32 portclb_saved; u32 portclbhi_saved; u32 portrxfis_saved; u32 portrxfishi_saved; /* As hardreset resets these CSR, save it to restore later */ portcmd_saved = readl(port_mmio + PORT_CMD); portclb_saved = readl(port_mmio + PORT_LST_ADDR); portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); hpriv->stop_engine(ap); rc = xgene_ahci_do_hardreset(link, deadline, &online); /* As controller hardreset clears them, restore them */ writel(portcmd_saved, port_mmio + PORT_CMD); writel(portclb_saved, port_mmio + PORT_LST_ADDR); writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); hpriv->start_engine(ap); if (online) *class = ahci_dev_classify(ap); return rc; } static void xgene_ahci_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; ahci_platform_disable_resources(hpriv); } /** * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected * to Port Multiplier. * @link: link to reset * @class: Return value to indicate class of device * @deadline: deadline jiffies for the operation * * Due to H/W errata, the controller is unable to save the PMP * field fetched from command header before sending the H2D FIS. * When the device returns the PMP port field in the D2H FIS, there is * a mismatch and results in command completion failure. The workaround * is to write the pmp value to PxFBS.DEV field before issuing any command * to PMP. */ static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { int pmp = sata_srst_pmp(link); struct ata_port *ap = link->ap; u32 rc; void __iomem *port_mmio = ahci_port_base(ap); u32 port_fbs; /* * Set PxFBS.DEV field with pmp * value. */ port_fbs = readl(port_mmio + PORT_FBS); port_fbs &= ~PORT_FBS_DEV_MASK; port_fbs |= pmp << PORT_FBS_DEV_OFFSET; writel(port_fbs, port_mmio + PORT_FBS); rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); return rc; } /** * xgene_ahci_softreset - Issue the softreset to the drive. * @link: link to reset * @class: Return value to indicate class of device * @deadline: deadline jiffies for the operation * * Due to H/W errata, the controller is unable to save the PMP * field fetched from command header before sending the H2D FIS. * When the device returns the PMP port field in the D2H FIS, there is * a mismatch and results in command completion failure. The workaround * is to write the pmp value to PxFBS.DEV field before issuing any command * to PMP. Here is the algorithm to detect PMP : * * 1. Save the PxFBS value * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends * 0xF for both PMP/NON-PMP initially * 3. Issue softreset * 4. If signature class is PMP goto 6 * 5. restore the original PxFBS and goto 3 * 6. return */ static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { int pmp = sata_srst_pmp(link); struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; struct xgene_ahci_context *ctx = hpriv->plat_data; void __iomem *port_mmio = ahci_port_base(ap); u32 port_fbs; u32 port_fbs_save; u32 retry = 1; u32 rc; port_fbs_save = readl(port_mmio + PORT_FBS); /* * Set PxFBS.DEV field with pmp * value. */ port_fbs = readl(port_mmio + PORT_FBS); port_fbs &= ~PORT_FBS_DEV_MASK; port_fbs |= pmp << PORT_FBS_DEV_OFFSET; writel(port_fbs, port_mmio + PORT_FBS); softreset_retry: rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); ctx->class[ap->port_no] = *class; if (*class != ATA_DEV_PMP) { /* * Retry for normal drives without * setting PxFBS.DEV field with pmp value. */ if (retry--) { writel(port_fbs_save, port_mmio + PORT_FBS); goto softreset_retry; } } return rc; } /** * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. * @host: Host that recieved the irq * @irq_masked: HOST_IRQ_STAT value * * For hardware with broken edge trigger latch * the HOST_IRQ_STAT register misses the edge interrupt * when clearing of HOST_IRQ_STAT register and hardware * reporting the PORT_IRQ_STAT register at the * same clock cycle. * As such, the algorithm below outlines the workaround. * * 1. Read HOST_IRQ_STAT register and save the state. * 2. Clear the HOST_IRQ_STAT register. * 3. Read back the HOST_IRQ_STAT register. * 4. If HOST_IRQ_STAT register equals to zero, then * traverse the rest of port's PORT_IRQ_STAT register * to check if an interrupt is triggered at that point else * go to step 6. * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero * then update the state of HOST_IRQ_STAT saved in step 1. * 6. Handle port interrupts. * 7. Exit */ static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, u32 irq_masked) { struct ahci_host_priv *hpriv = host->private_data; void __iomem *port_mmio; int i; if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { for (i = 0; i < host->n_ports; i++) { if (irq_masked & (1 << i)) continue; port_mmio = ahci_port_base(host->ports[i]); if (readl(port_mmio + PORT_IRQ_STAT)) irq_masked |= (1 << i); } } return ahci_handle_port_intr(host, irq_masked); } static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) { struct ata_host *host = dev_instance; struct ahci_host_priv *hpriv; unsigned int rc = 0; void __iomem *mmio; u32 irq_stat, irq_masked; hpriv = host->private_data; mmio = hpriv->mmio; /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); if (!irq_stat) return IRQ_NONE; irq_masked = irq_stat & hpriv->port_map; spin_lock(&host->lock); /* * HOST_IRQ_STAT behaves as edge triggered latch meaning that * it should be cleared before all the port events are cleared. */ writel(irq_stat, mmio + HOST_IRQ_STAT); rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); spin_unlock(&host->lock); return IRQ_RETVAL(rc); } static struct ata_port_operations xgene_ahci_v1_ops = { .inherits = &ahci_ops, .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, .read_id = xgene_ahci_read_id, .qc_issue = xgene_ahci_qc_issue, .softreset = xgene_ahci_softreset, .pmp_softreset = xgene_ahci_pmp_softreset }; static const struct ata_port_info xgene_ahci_v1_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &xgene_ahci_v1_ops, }; static struct ata_port_operations xgene_ahci_v2_ops = { .inherits = &ahci_ops, .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, .read_id = xgene_ahci_read_id, }; static const struct ata_port_info xgene_ahci_v2_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &xgene_ahci_v2_ops, }; static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) { struct xgene_ahci_context *ctx = hpriv->plat_data; int i; int rc; u32 val; /* Remove IP RAM out of shutdown */ rc = xgene_ahci_init_memram(ctx); if (rc) return rc; for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) xgene_ahci_set_phy_cfg(ctx, i); /* AXI disable Mask */ writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ writel(0, ctx->csr_core + INTSTATUSMASK); val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", INTSTATUSMASK, val); writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); readl(ctx->csr_axi + INT_SLV_TMOMASK); /* Enable AXI Interrupt */ writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); /* Enable coherency */ val = readl(ctx->csr_core + BUSCTLREG); val &= ~0x00000002; /* Enable write coherency */ val &= ~0x00000001; /* Enable read coherency */ writel(val, ctx->csr_core + BUSCTLREG); val = readl(ctx->csr_core + IOFMSTRWAUX); val |= (1 << 3); /* Enable read coherency */ val |= (1 << 9); /* Enable write coherency */ writel(val, ctx->csr_core + IOFMSTRWAUX); val = readl(ctx->csr_core + IOFMSTRWAUX); dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", IOFMSTRWAUX, val); return rc; } static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) { u32 val; /* Check for optional MUX resource */ if (!ctx->csr_mux) return 0; val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); val &= ~CFG_SATA_ENET_SELECT_MASK; writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; } static const struct scsi_host_template ahci_platform_sht = { AHCI_SHT(DRV_NAME), }; #ifdef CONFIG_ACPI static const struct acpi_device_id xgene_ahci_acpi_match[] = { { "APMC0D0D", XGENE_AHCI_V1}, { "APMC0D32", XGENE_AHCI_V2}, {}, }; MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); #endif static const struct of_device_id xgene_ahci_of_match[] = { {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); static int xgene_ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct xgene_ahci_context *ctx; struct resource *res; enum xgene_ahci_version version = XGENE_AHCI_V1; const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, &xgene_ahci_v2_port_info }; int rc; hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; hpriv->plat_data = ctx; ctx->hpriv = hpriv; ctx->dev = dev; /* Retrieve the IP core resource */ ctx->csr_core = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(ctx->csr_core)) return PTR_ERR(ctx->csr_core); /* Retrieve the IP diagnostic resource */ ctx->csr_diag = devm_platform_ioremap_resource(pdev, 2); if (IS_ERR(ctx->csr_diag)) return PTR_ERR(ctx->csr_diag); /* Retrieve the IP AXI resource */ ctx->csr_axi = devm_platform_ioremap_resource(pdev, 3); if (IS_ERR(ctx->csr_axi)) return PTR_ERR(ctx->csr_axi); /* Retrieve the optional IP mux resource */ res = platform_get_resource(pdev, IORESOURCE_MEM, 4); if (res) { void __iomem *csr = devm_ioremap_resource(dev, res); if (IS_ERR(csr)) return PTR_ERR(csr); ctx->csr_mux = csr; } if (dev->of_node) { version = (enum xgene_ahci_version)of_device_get_match_data(dev); } #ifdef CONFIG_ACPI else { const struct acpi_device_id *acpi_id; struct acpi_device_info *info; acpi_status status; acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); if (!acpi_id) { dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); version = XGENE_AHCI_V1; } else if (acpi_id->driver_data) { version = (enum xgene_ahci_version) acpi_id->driver_data; status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); if (ACPI_FAILURE(status)) { dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", __func__); version = XGENE_AHCI_V1; } else { if (info->valid & ACPI_VALID_CID) version = XGENE_AHCI_V2; kfree(info); } } } #endif dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, hpriv->mmio); /* Select ATA */ if ((rc = xgene_ahci_mux_select(ctx))) { dev_err(dev, "SATA mux selection failed error %d\n", rc); return -ENODEV; } if (xgene_ahci_is_memram_inited(ctx)) { dev_info(dev, "skip clock and PHY initialization\n"); goto skip_clk_phy; } /* Due to errata, HW requires full toggle transition */ rc = ahci_platform_enable_clks(hpriv); if (rc) goto disable_resources; ahci_platform_disable_clks(hpriv); rc = ahci_platform_enable_resources(hpriv); if (rc) goto disable_resources; /* Configure the host controller */ xgene_ahci_hw_init(hpriv); skip_clk_phy: switch (version) { case XGENE_AHCI_V1: hpriv->flags = AHCI_HFLAG_NO_NCQ; break; case XGENE_AHCI_V2: hpriv->flags |= AHCI_HFLAG_YES_FBS; hpriv->irq_handler = xgene_ahci_irq_intr; break; default: break; } rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], &ahci_platform_sht); if (rc) goto disable_resources; dev_dbg(dev, "X-Gene SATA host controller initialized\n"); return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } static struct platform_driver xgene_ahci_driver = { .probe = xgene_ahci_probe, .remove_new = ata_platform_remove_one, .driver = { .name = DRV_NAME, .of_match_table = xgene_ahci_of_match, .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), }, }; module_platform_driver(xgene_ahci_driver); MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); MODULE_AUTHOR("Loc Ho "); MODULE_LICENSE("GPL"); MODULE_VERSION("0.4");