// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * core_intr.c - DesignWare HS OTG Controller common interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The names of the above-listed copyright holders may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation; either version 2 of the License, or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains the common interrupt handlers */ #include #include #include #include #include #include #include #include #include #include #include #include "core.h" #include "hcd.h" static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) { switch (hsotg->op_state) { case OTG_STATE_A_HOST: return "a_host"; case OTG_STATE_A_SUSPEND: return "a_suspend"; case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; case OTG_STATE_B_HOST: return "b_host"; default: return "unknown"; } } /** * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. * When the PRTINT interrupt fires, there are certain status bits in the Host * Port that needs to get cleared. * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) { u32 hprt0 = dwc2_readl(hsotg, HPRT0); if (hprt0 & HPRT0_ENACHG) { hprt0 &= ~HPRT0_ENA; dwc2_writel(hsotg, hprt0, HPRT0); } } /** * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) { /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS); dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device"); } /** * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG * Interrupt Register (GOTGINT) to determine what interrupt has occurred. * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) { u32 gotgint; u32 gotgctl; u32 gintmsk; gotgint = dwc2_readl(hsotg, GOTGINT); gotgctl = dwc2_readl(hsotg, GOTGCTL); dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, dwc2_op_state_str(hsotg)); if (gotgint & GOTGINT_SES_END_DET) { dev_dbg(hsotg->dev, " ++OTG Interrupt: Session End Detected++ (%s)\n", dwc2_op_state_str(hsotg)); gotgctl = dwc2_readl(hsotg, GOTGCTL); if (dwc2_is_device_mode(hsotg)) dwc2_hsotg_disconnect(hsotg); if (hsotg->op_state == OTG_STATE_B_HOST) { hsotg->op_state = OTG_STATE_B_PERIPHERAL; } else { /* * If not B_HOST and Device HNP still set, HNP did * not succeed! */ if (gotgctl & GOTGCTL_DEVHNPEN) { dev_dbg(hsotg->dev, "Session End Detected\n"); dev_err(hsotg->dev, "Device Not Connected/Responding!\n"); } /* * If Session End Detected the B-Cable has been * disconnected */ /* Reset to a clean state */ hsotg->lx_state = DWC2_L0; } gotgctl = dwc2_readl(hsotg, GOTGCTL); gotgctl &= ~GOTGCTL_DEVHNPEN; dwc2_writel(hsotg, gotgctl, GOTGCTL); } if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { dev_dbg(hsotg->dev, " ++OTG Interrupt: Session Request Success Status Change++\n"); gotgctl = dwc2_readl(hsotg, GOTGCTL); if (gotgctl & GOTGCTL_SESREQSCS) { if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS && hsotg->params.i2c_enable) { hsotg->srp_success = 1; } else { /* Clear Session Request */ gotgctl = dwc2_readl(hsotg, GOTGCTL); gotgctl &= ~GOTGCTL_SESREQ; dwc2_writel(hsotg, gotgctl, GOTGCTL); } } } if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { /* * Print statements during the HNP interrupt handling * can cause it to fail */ gotgctl = dwc2_readl(hsotg, GOTGCTL); /* * WA for 3.00a- HW is not setting cur_mode, even sometimes * this does not help */ if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) udelay(100); if (gotgctl & GOTGCTL_HSTNEGSCS) { if (dwc2_is_host_mode(hsotg)) { hsotg->op_state = OTG_STATE_B_HOST; /* * Need to disable SOF interrupt immediately. * When switching from device to host, the PCD * interrupt handler won't handle the interrupt * if host mode is already set. The HCD * interrupt handler won't get called if the * HCD state is HALT. This means that the * interrupt does not get handled and Linux * complains loudly. */ gintmsk = dwc2_readl(hsotg, GINTMSK); gintmsk &= ~GINTSTS_SOF; dwc2_writel(hsotg, gintmsk, GINTMSK); /* * Call callback function with spin lock * released */ spin_unlock(&hsotg->lock); /* Initialize the Core for Host mode */ dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_B_HOST; } } else { gotgctl = dwc2_readl(hsotg, GOTGCTL); gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); dwc2_writel(hsotg, gotgctl, GOTGCTL); dev_dbg(hsotg->dev, "HNP Failed\n"); dev_err(hsotg->dev, "Device Not Connected/Responding\n"); } } if (gotgint & GOTGINT_HST_NEG_DET) { /* * The disconnect interrupt is set at the same time as * Host Negotiation Detected. During the mode switch all * interrupts are cleared so the disconnect interrupt * handler will not get executed. */ dev_dbg(hsotg->dev, " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", hsotg->op_state); spin_unlock(&hsotg->lock); dwc2_hcd_disconnect(hsotg, false); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_PERIPHERAL; } else { /* Need to disable SOF interrupt immediately */ gintmsk = dwc2_readl(hsotg, GINTMSK); gintmsk &= ~GINTSTS_SOF; dwc2_writel(hsotg, gintmsk, GINTMSK); spin_unlock(&hsotg->lock); dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_HOST; } } if (gotgint & GOTGINT_A_DEV_TOUT_CHG) dev_dbg(hsotg->dev, " ++OTG Interrupt: A-Device Timeout Change++\n"); if (gotgint & GOTGINT_DBNCE_DONE) dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); /* Clear GOTGINT */ dwc2_writel(hsotg, gotgint, GOTGINT); } /** * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status * Change Interrupt * * @hsotg: Programming view of DWC_otg controller * * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a * Device to Host Mode transition or a Host to Device Mode transition. This only * occurs when the cable is connected/removed from the PHY connector. */ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) { u32 gintmsk; /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS); /* Need to disable SOF interrupt immediately */ gintmsk = dwc2_readl(hsotg, GINTMSK); gintmsk &= ~GINTSTS_SOF; dwc2_writel(hsotg, gintmsk, GINTMSK); dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device"); /* * Need to schedule a work, as there are possible DELAY function calls. */ if (hsotg->wq_otg) queue_work(hsotg->wq_otg, &hsotg->wf_otg); } /** * dwc2_handle_session_req_intr() - This interrupt indicates that a device is * initiating the Session Request Protocol to request the host to turn on bus * power so a new session can begin * * @hsotg: Programming view of DWC_otg controller * * This handler responds by turning on bus power. If the DWC_otg controller is * in low power mode, this handler brings the controller out of low power mode * before turning on bus power. */ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) { int ret; /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS); dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", hsotg->lx_state); if (dwc2_is_device_mode(hsotg)) { if (hsotg->lx_state == DWC2_L2) { ret = dwc2_exit_partial_power_down(hsotg, true); if (ret && (ret != -ENOTSUPP)) dev_err(hsotg->dev, "exit power_down failed\n"); } /* * Report disconnect if there is any previous session * established */ dwc2_hsotg_disconnect(hsotg); } } /** * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state * * @hsotg: Programming view of DWC_otg controller * */ static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg) { u32 glpmcfg; u32 i = 0; if (hsotg->lx_state != DWC2_L1) { dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n"); return; } glpmcfg = dwc2_readl(hsotg, GLPMCFG); if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "Exit from L1 state\n"); glpmcfg &= ~GLPMCFG_ENBLSLPM; glpmcfg &= ~GLPMCFG_HIRD_THRES_EN; dwc2_writel(hsotg, glpmcfg, GLPMCFG); do { glpmcfg = dwc2_readl(hsotg, GLPMCFG); if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK | GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS))) break; udelay(1); } while (++i < 200); if (i == 200) { dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n"); return; } dwc2_gadget_init_lpm(hsotg); } else { /* TODO */ dev_err(hsotg->dev, "Host side LPM is not supported.\n"); return; } /* Change to L0 state */ hsotg->lx_state = DWC2_L0; /* Inform gadget to exit from L1 */ call_gadget(hsotg, resume); } /* * This interrupt indicates that the DWC_otg controller has detected a * resume or remote wakeup sequence. If the DWC_otg controller is in * low power mode, the handler must brings the controller out of low * power mode. The controller automatically begins resume signaling. * The handler schedules a time to stop resume signaling. */ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) { int ret; /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS); dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); if (hsotg->lx_state == DWC2_L1) { dwc2_wakeup_from_lpm_l1(hsotg); return; } if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dwc2_readl(hsotg, DSTS)); if (hsotg->lx_state == DWC2_L2) { u32 dctl = dwc2_readl(hsotg, DCTL); /* Clear Remote Wakeup Signaling */ dctl &= ~DCTL_RMTWKUPSIG; dwc2_writel(hsotg, dctl, DCTL); ret = dwc2_exit_partial_power_down(hsotg, true); if (ret && (ret != -ENOTSUPP)) dev_err(hsotg->dev, "exit power_down failed\n"); call_gadget(hsotg, resume); } /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } else { if (hsotg->params.power_down) return; if (hsotg->lx_state != DWC2_L1) { u32 pcgcctl = dwc2_readl(hsotg, PCGCTL); /* Restart the Phy Clock */ pcgcctl &= ~PCGCTL_STOPPCLK; dwc2_writel(hsotg, pcgcctl, PCGCTL); /* * If we've got this quirk then the PHY is stuck upon * wakeup. Assert reset. This will propagate out and * eventually we'll re-enumerate the device. Not great * but the best we can do. We can't call phy_reset() * at interrupt time but there's no hurry, so we'll * schedule it for later. */ if (hsotg->reset_phy_on_wake) dwc2_host_schedule_phy_reset(hsotg); mod_timer(&hsotg->wkp_timer, jiffies + msecs_to_jiffies(71)); } else { /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } } } /* * This interrupt indicates that a device has been disconnected from the * root port */ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) { dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS); dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device", dwc2_op_state_str(hsotg)); if (hsotg->op_state == OTG_STATE_A_HOST) dwc2_hcd_disconnect(hsotg, false); } /* * This interrupt indicates that SUSPEND state has been detected on the USB. * * For HNP the USB Suspend interrupt signals the change from "a_peripheral" * to "a_host". * * When power management is enabled the core will be put in low power mode. */ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) { u32 dsts; int ret; /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS); dev_dbg(hsotg->dev, "USB SUSPEND\n"); if (dwc2_is_device_mode(hsotg)) { /* * Check the Device status register to determine if the Suspend * state is active */ dsts = dwc2_readl(hsotg, DSTS); dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts); dev_dbg(hsotg->dev, "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n", !!(dsts & DSTS_SUSPSTS), hsotg->hw_params.power_optimized, hsotg->hw_params.hibernation); /* Ignore suspend request before enumeration */ if (!dwc2_is_device_connected(hsotg)) { dev_dbg(hsotg->dev, "ignore suspend request before enumeration\n"); return; } if (dsts & DSTS_SUSPSTS) { if (hsotg->hw_params.power_optimized) { ret = dwc2_enter_partial_power_down(hsotg); if (ret) { if (ret != -ENOTSUPP) dev_err(hsotg->dev, "%s: enter partial_power_down failed\n", __func__); goto skip_power_saving; } udelay(100); /* Ask phy to be suspended */ if (!IS_ERR_OR_NULL(hsotg->uphy)) usb_phy_set_suspend(hsotg->uphy, true); } if (hsotg->hw_params.hibernation) { ret = dwc2_enter_hibernation(hsotg, 0); if (ret && ret != -ENOTSUPP) dev_err(hsotg->dev, "%s: enter hibernation failed\n", __func__); } skip_power_saving: /* * Change to L2 (suspend) state before releasing * spinlock */ hsotg->lx_state = DWC2_L2; /* Call gadget suspend callback */ call_gadget(hsotg, suspend); } } else { if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); /* Change to L2 (suspend) state */ hsotg->lx_state = DWC2_L2; /* Clear the a_peripheral flag, back to a_host */ spin_unlock(&hsotg->lock); dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_HOST; } } } /** * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler * * @hsotg: Programming view of DWC_otg controller * */ static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg) { u32 glpmcfg; u32 pcgcctl; u32 hird; u32 hird_thres; u32 hird_thres_en; u32 enslpm; /* Clear interrupt */ dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS); glpmcfg = dwc2_readl(hsotg, GLPMCFG); if (!(glpmcfg & GLPMCFG_LPMCAP)) { dev_err(hsotg->dev, "Unexpected LPM interrupt\n"); return; } hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT; hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK & ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT; hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN; enslpm = glpmcfg & GLPMCFG_ENBLSLPM; if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en); if (hird_thres_en && hird >= hird_thres) { dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n"); } else if (enslpm) { dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n"); } else { dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n"); pcgcctl = dwc2_readl(hsotg, PCGCTL); pcgcctl |= PCGCTL_ENBL_SLEEP_GATING; dwc2_writel(hsotg, pcgcctl, PCGCTL); } /** * Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ udelay(10); glpmcfg = dwc2_readl(hsotg, GLPMCFG); if (glpmcfg & GLPMCFG_SLPSTS) { /* Save the current state */ hsotg->lx_state = DWC2_L1; dev_dbg(hsotg->dev, "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg); /* Inform gadget that we are in L1 state */ call_gadget(hsotg, suspend); } } } #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ GINTSTS_USBSUSP | GINTSTS_PRTINT | \ GINTSTS_LPMTRANRCVD) /* * This function returns the Core Interrupt register */ static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) { u32 gintsts; u32 gintmsk; u32 gahbcfg; u32 gintmsk_common = GINTMSK_COMMON; gintsts = dwc2_readl(hsotg, GINTSTS); gintmsk = dwc2_readl(hsotg, GINTMSK); gahbcfg = dwc2_readl(hsotg, GAHBCFG); /* If any common interrupts set */ if (gintsts & gintmsk_common) dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", gintsts, gintmsk); if (gahbcfg & GAHBCFG_GLBL_INTR_EN) return gintsts & gintmsk & gintmsk_common; else return 0; } /* * GPWRDN interrupt handler. * * The GPWRDN interrupts are those that occur in both Host and * Device mode while core is in hibernated state. */ static void dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg) { u32 gpwrdn; int linestate; gpwrdn = dwc2_readl(hsotg, GPWRDN); /* clear all interrupt */ dwc2_writel(hsotg, gpwrdn, GPWRDN); linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT; dev_dbg(hsotg->dev, "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__, gpwrdn); if ((gpwrdn & GPWRDN_DISCONN_DET) && (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) { u32 gpwrdn_tmp; dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__); /* Switch-on voltage to the core */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); udelay(10); /* Reset core */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); udelay(10); /* Disable Power Down Clamp */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); udelay(10); /* Deassert reset core */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp |= GPWRDN_PWRDNRSTN; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); udelay(10); /* Disable PMU interrupt */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp &= ~GPWRDN_PMUINTSEL; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); /* De-assert Wakeup Logic */ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); gpwrdn_tmp &= ~GPWRDN_PMUACTV; dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); hsotg->hibernated = 0; if (gpwrdn & GPWRDN_IDSTS) { hsotg->op_state = OTG_STATE_B_PERIPHERAL; dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); dwc2_hsotg_core_connect(hsotg); } else { hsotg->op_state = OTG_STATE_A_HOST; /* Initialize the Core for Host mode */ dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); dwc2_hcd_start(hsotg); } } if ((gpwrdn & GPWRDN_LNSTSCHG) && (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) { dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__); if (hsotg->hw_params.hibernation && hsotg->hibernated) { if (gpwrdn & GPWRDN_IDSTS) { dwc2_exit_hibernation(hsotg, 0, 0, 0); call_gadget(hsotg, resume); } else { dwc2_exit_hibernation(hsotg, 1, 0, 1); } } } if ((gpwrdn & GPWRDN_RST_DET) && (gpwrdn & GPWRDN_RST_DET_MSK)) { dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__); if (!linestate && (gpwrdn & GPWRDN_BSESSVLD)) dwc2_exit_hibernation(hsotg, 0, 1, 0); } if ((gpwrdn & GPWRDN_STS_CHGINT) && (gpwrdn & GPWRDN_STS_CHGINT_MSK) && linestate) { dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__); if (hsotg->hw_params.hibernation && hsotg->hibernated) { if (gpwrdn & GPWRDN_IDSTS) { dwc2_exit_hibernation(hsotg, 0, 0, 0); call_gadget(hsotg, resume); } else { dwc2_exit_hibernation(hsotg, 1, 0, 1); } } } } /* * Common interrupt handler * * The common interrupts are those that occur in both Host and Device mode. * This handler handles the following interrupts: * - Mode Mismatch Interrupt * - OTG Interrupt * - Connector ID Status Change Interrupt * - Disconnect Interrupt * - Session Request Interrupt * - Resume / Remote Wakeup Detected Interrupt * - Suspend Interrupt */ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) { struct dwc2_hsotg *hsotg = dev; u32 gintsts; irqreturn_t retval = IRQ_NONE; spin_lock(&hsotg->lock); if (!dwc2_is_controller_alive(hsotg)) { dev_warn(hsotg->dev, "Controller is dead\n"); goto out; } /* Reading current frame number value in device or host modes. */ if (dwc2_is_device_mode(hsotg)) hsotg->frame_number = (dwc2_readl(hsotg, DSTS) & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; else hsotg->frame_number = (dwc2_readl(hsotg, HFNUM) & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; gintsts = dwc2_read_common_intr(hsotg); if (gintsts & ~GINTSTS_PRTINT) retval = IRQ_HANDLED; /* In case of hibernated state gintsts must not work */ if (hsotg->hibernated) { dwc2_handle_gpwrdn_intr(hsotg); retval = IRQ_HANDLED; goto out; } if (gintsts & GINTSTS_MODEMIS) dwc2_handle_mode_mismatch_intr(hsotg); if (gintsts & GINTSTS_OTGINT) dwc2_handle_otg_intr(hsotg); if (gintsts & GINTSTS_CONIDSTSCHNG) dwc2_handle_conn_id_status_change_intr(hsotg); if (gintsts & GINTSTS_DISCONNINT) dwc2_handle_disconnect_intr(hsotg); if (gintsts & GINTSTS_SESSREQINT) dwc2_handle_session_req_intr(hsotg); if (gintsts & GINTSTS_WKUPINT) dwc2_handle_wakeup_detected_intr(hsotg); if (gintsts & GINTSTS_USBSUSP) dwc2_handle_usb_suspend_intr(hsotg); if (gintsts & GINTSTS_LPMTRANRCVD) dwc2_handle_lpm_intr(hsotg); if (gintsts & GINTSTS_PRTINT) { /* * The port interrupt occurs while in device mode with HPRT0 * Port Enable/Disable */ if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, " --Port interrupt received in Device mode--\n"); dwc2_handle_usb_port_intr(hsotg); retval = IRQ_HANDLED; } } out: spin_unlock(&hsotg->lock); return retval; }