/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ /* Copyright (c) 2019 Mellanox Technologies. */ #ifndef DIM_H #define DIM_H #include #include #include #include #include /* * Number of events between DIM iterations. * Causes a moderation of the algorithm run. */ #define DIM_NEVENTS 64 /* * Is a difference between values justifies taking an action. * We consider 10% difference as significant. */ #define IS_SIGNIFICANT_DIFF(val, ref) \ ((ref) && (((100UL * abs((val) - (ref))) / (ref)) > 10)) /* * Calculate the gap between two values. * Take wrap-around and variable size into consideration. */ #define BIT_GAP(bits, end, start) ((((end) - (start)) + BIT_ULL(bits)) \ & (BIT_ULL(bits) - 1)) /** * struct dim_cq_moder - Structure for CQ moderation values. * Used for communications between DIM and its consumer. * * @usec: CQ timer suggestion (by DIM) * @pkts: CQ packet counter suggestion (by DIM) * @comps: Completion counter * @cq_period_mode: CQ period count mode (from CQE/EQE) */ struct dim_cq_moder { u16 usec; u16 pkts; u16 comps; u8 cq_period_mode; }; /** * struct dim_sample - Structure for DIM sample data. * Used for communications between DIM and its consumer. * * @time: Sample timestamp * @pkt_ctr: Number of packets * @byte_ctr: Number of bytes * @event_ctr: Number of events * @comp_ctr: Current completion counter */ struct dim_sample { ktime_t time; u32 pkt_ctr; u32 byte_ctr; u16 event_ctr; u32 comp_ctr; }; /** * struct dim_stats - Structure for DIM stats. * Used for holding current measured rates. * * @ppms: Packets per msec * @bpms: Bytes per msec * @epms: Events per msec * @cpms: Completions per msec * @cpe_ratio: Ratio of completions to events */ struct dim_stats { int ppms; /* packets per msec */ int bpms; /* bytes per msec */ int epms; /* events per msec */ int cpms; /* completions per msec */ int cpe_ratio; /* ratio of completions to events */ }; /** * struct dim - Main structure for dynamic interrupt moderation (DIM). * Used for holding all information about a specific DIM instance. * * @state: Algorithm state (see below) * @prev_stats: Measured rates from previous iteration (for comparison) * @start_sample: Sampled data at start of current iteration * @measuring_sample: A &dim_sample that is used to update the current events * @work: Work to perform on action required * @priv: A pointer to the struct that points to dim * @profile_ix: Current moderation profile * @mode: CQ period count mode * @tune_state: Algorithm tuning state (see below) * @steps_right: Number of steps taken towards higher moderation * @steps_left: Number of steps taken towards lower moderation * @tired: Parking depth counter */ struct dim { u8 state; struct dim_stats prev_stats; struct dim_sample start_sample; struct dim_sample measuring_sample; struct work_struct work; void *priv; u8 profile_ix; u8 mode; u8 tune_state; u8 steps_right; u8 steps_left; u8 tired; }; /** * enum dim_cq_period_mode - Modes for CQ period count * * @DIM_CQ_PERIOD_MODE_START_FROM_EQE: Start counting from EQE * @DIM_CQ_PERIOD_MODE_START_FROM_CQE: Start counting from CQE (implies timer reset) * @DIM_CQ_PERIOD_NUM_MODES: Number of modes */ enum dim_cq_period_mode { DIM_CQ_PERIOD_MODE_START_FROM_EQE = 0x0, DIM_CQ_PERIOD_MODE_START_FROM_CQE = 0x1, DIM_CQ_PERIOD_NUM_MODES }; /** * enum dim_state - DIM algorithm states * * These will determine if the algorithm is in a valid state to start an iteration. * * @DIM_START_MEASURE: This is the first iteration (also after applying a new profile) * @DIM_MEASURE_IN_PROGRESS: Algorithm is already in progress - check if * need to perform an action * @DIM_APPLY_NEW_PROFILE: DIM consumer is currently applying a profile - no need to measure */ enum dim_state { DIM_START_MEASURE, DIM_MEASURE_IN_PROGRESS, DIM_APPLY_NEW_PROFILE, }; /** * enum dim_tune_state - DIM algorithm tune states * * These will determine which action the algorithm should perform. * * @DIM_PARKING_ON_TOP: Algorithm found a local top point - exit on significant difference * @DIM_PARKING_TIRED: Algorithm found a deep top point - don't exit if tired > 0 * @DIM_GOING_RIGHT: Algorithm is currently trying higher moderation levels * @DIM_GOING_LEFT: Algorithm is currently trying lower moderation levels */ enum dim_tune_state { DIM_PARKING_ON_TOP, DIM_PARKING_TIRED, DIM_GOING_RIGHT, DIM_GOING_LEFT, }; /** * enum dim_stats_state - DIM algorithm statistics states * * These will determine the verdict of current iteration. * * @DIM_STATS_WORSE: Current iteration shows worse performance than before * @DIM_STATS_SAME: Current iteration shows same performance than before * @DIM_STATS_BETTER: Current iteration shows better performance than before */ enum dim_stats_state { DIM_STATS_WORSE, DIM_STATS_SAME, DIM_STATS_BETTER, }; /** * enum dim_step_result - DIM algorithm step results * * These describe the result of a step. * * @DIM_STEPPED: Performed a regular step * @DIM_TOO_TIRED: Same kind of step was done multiple times - should go to * tired parking * @DIM_ON_EDGE: Stepped to the most left/right profile */ enum dim_step_result { DIM_STEPPED, DIM_TOO_TIRED, DIM_ON_EDGE, }; /** * dim_on_top - check if current state is a good place to stop (top location) * @dim: DIM context * * Check if current profile is a good place to park at. * This will result in reducing the DIM checks frequency as we assume we * shouldn't probably change profiles, unless traffic pattern wasn't changed. */ bool dim_on_top(struct dim *dim); /** * dim_turn - change profile altering direction * @dim: DIM context * * Go left if we were going right and vice-versa. * Do nothing if currently parking. */ void dim_turn(struct dim *dim); /** * dim_park_on_top - enter a parking state on a top location * @dim: DIM context * * Enter parking state. * Clear all movement history. */ void dim_park_on_top(struct dim *dim); /** * dim_park_tired - enter a tired parking state * @dim: DIM context * * Enter parking state. * Clear all movement history and cause DIM checks frequency to reduce. */ void dim_park_tired(struct dim *dim); /** * dim_calc_stats - calculate the difference between two samples * @start: start sample * @end: end sample * @curr_stats: delta between samples * * Calculate the delta between two samples (in data rates). * Takes into consideration counter wrap-around. * Returned boolean indicates whether curr_stats are reliable. */ bool dim_calc_stats(struct dim_sample *start, struct dim_sample *end, struct dim_stats *curr_stats); /** * dim_update_sample - set a sample's fields with given values * @event_ctr: number of events to set * @packets: number of packets to set * @bytes: number of bytes to set * @s: DIM sample */ static inline void dim_update_sample(u16 event_ctr, u64 packets, u64 bytes, struct dim_sample *s) { s->time = ktime_get(); s->pkt_ctr = packets; s->byte_ctr = bytes; s->event_ctr = event_ctr; } /** * dim_update_sample_with_comps - set a sample's fields with given * values including the completion parameter * @event_ctr: number of events to set * @packets: number of packets to set * @bytes: number of bytes to set * @comps: number of completions to set * @s: DIM sample */ static inline void dim_update_sample_with_comps(u16 event_ctr, u64 packets, u64 bytes, u64 comps, struct dim_sample *s) { dim_update_sample(event_ctr, packets, bytes, s); s->comp_ctr = comps; } /* Net DIM */ /** * net_dim_get_rx_moderation - provide a CQ moderation object for the given RX profile * @cq_period_mode: CQ period mode * @ix: Profile index */ struct dim_cq_moder net_dim_get_rx_moderation(u8 cq_period_mode, int ix); /** * net_dim_get_def_rx_moderation - provide the default RX moderation * @cq_period_mode: CQ period mode */ struct dim_cq_moder net_dim_get_def_rx_moderation(u8 cq_period_mode); /** * net_dim_get_tx_moderation - provide a CQ moderation object for the given TX profile * @cq_period_mode: CQ period mode * @ix: Profile index */ struct dim_cq_moder net_dim_get_tx_moderation(u8 cq_period_mode, int ix); /** * net_dim_get_def_tx_moderation - provide the default TX moderation * @cq_period_mode: CQ period mode */ struct dim_cq_moder net_dim_get_def_tx_moderation(u8 cq_period_mode); /** * net_dim - main DIM algorithm entry point * @dim: DIM instance information * @end_sample: Current data measurement * * Called by the consumer. * This is the main logic of the algorithm, where data is processed in order * to decide on next required action. */ void net_dim(struct dim *dim, struct dim_sample end_sample); /* RDMA DIM */ /* * RDMA DIM profile: * profile size must be of RDMA_DIM_PARAMS_NUM_PROFILES. */ #define RDMA_DIM_PARAMS_NUM_PROFILES 9 #define RDMA_DIM_START_PROFILE 0 /** * rdma_dim - Runs the adaptive moderation. * @dim: The moderation struct. * @completions: The number of completions collected in this round. * * Each call to rdma_dim takes the latest amount of completions that * have been collected and counts them as a new event. * Once enough events have been collected the algorithm decides a new * moderation level. */ void rdma_dim(struct dim *dim, u64 completions); #endif /* DIM_H */