/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_SCSI_CMND_H #define _SCSI_SCSI_CMND_H #include #include #include #include #include #include #include #include struct Scsi_Host; /* * MAX_COMMAND_SIZE is: * The longest fixed-length SCSI CDB as per the SCSI standard. * fixed-length means: commands that their size can be determined * by their opcode and the CDB does not carry a length specifier, (unlike * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly * true and the SCSI standard also defines extended commands and * vendor specific commands that can be bigger than 16 bytes. The kernel * will support these using the same infrastructure used for VARLEN CDB's. * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml * supports without specifying a cmd_len by ULD's */ #define MAX_COMMAND_SIZE 16 struct scsi_data_buffer { struct sg_table table; unsigned length; }; /* embedded in scsi_cmnd */ struct scsi_pointer { char *ptr; /* data pointer */ int this_residual; /* left in this buffer */ struct scatterlist *buffer; /* which buffer */ int buffers_residual; /* how many buffers left */ dma_addr_t dma_handle; volatile int Status; volatile int Message; volatile int have_data_in; volatile int sent_command; volatile int phase; }; /* for scmd->flags */ #define SCMD_TAGGED (1 << 0) #define SCMD_INITIALIZED (1 << 1) #define SCMD_LAST (1 << 2) /* * libata uses SCSI EH to fetch sense data for successful commands. * SCSI EH should not overwrite scmd->result when SCMD_FORCE_EH_SUCCESS is set. */ #define SCMD_FORCE_EH_SUCCESS (1 << 3) #define SCMD_FAIL_IF_RECOVERING (1 << 4) /* flags preserved across unprep / reprep */ #define SCMD_PRESERVED_FLAGS (SCMD_INITIALIZED | SCMD_FAIL_IF_RECOVERING) /* for scmd->state */ #define SCMD_STATE_COMPLETE 0 #define SCMD_STATE_INFLIGHT 1 enum scsi_cmnd_submitter { SUBMITTED_BY_BLOCK_LAYER = 0, SUBMITTED_BY_SCSI_ERROR_HANDLER = 1, SUBMITTED_BY_SCSI_RESET_IOCTL = 2, } __packed; struct scsi_cmnd { struct scsi_device *device; struct list_head eh_entry; /* entry for the host eh_abort_list/eh_cmd_q */ struct delayed_work abort_work; struct rcu_head rcu; int eh_eflags; /* Used by error handlr */ int budget_token; /* * This is set to jiffies as it was when the command was first * allocated. It is used to time how long the command has * been outstanding */ unsigned long jiffies_at_alloc; int retries; int allowed; unsigned char prot_op; unsigned char prot_type; unsigned char prot_flags; enum scsi_cmnd_submitter submitter; unsigned short cmd_len; enum dma_data_direction sc_data_direction; unsigned char cmnd[32]; /* SCSI CDB */ /* These elements define the operation we ultimately want to perform */ struct scsi_data_buffer sdb; struct scsi_data_buffer *prot_sdb; unsigned underflow; /* Return error if less than this amount is transferred */ unsigned transfersize; /* How much we are guaranteed to transfer with each SCSI transfer (ie, between disconnect / reconnects. Probably == sector size */ unsigned resid_len; /* residual count */ unsigned sense_len; unsigned char *sense_buffer; /* obtained by REQUEST SENSE when * CHECK CONDITION is received on original * command (auto-sense). Length must be * SCSI_SENSE_BUFFERSIZE bytes. */ int flags; /* Command flags */ unsigned long state; /* Command completion state */ unsigned int extra_len; /* length of alignment and padding */ /* * The fields below can be modified by the LLD but the fields above * must not be modified. */ unsigned char *host_scribble; /* The host adapter is allowed to * call scsi_malloc and get some memory * and hang it here. The host adapter * is also expected to call scsi_free * to release this memory. (The memory * obtained by scsi_malloc is guaranteed * to be at an address < 16Mb). */ int result; /* Status code from lower level driver */ }; /* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */ static inline struct request *scsi_cmd_to_rq(struct scsi_cmnd *scmd) { return blk_mq_rq_from_pdu(scmd); } /* * Return the driver private allocation behind the command. * Only works if cmd_size is set in the host template. */ static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd) { return cmd + 1; } void scsi_done(struct scsi_cmnd *cmd); void scsi_done_direct(struct scsi_cmnd *cmd); extern void scsi_finish_command(struct scsi_cmnd *cmd); extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, size_t *offset, size_t *len); extern void scsi_kunmap_atomic_sg(void *virt); blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd); void scsi_free_sgtables(struct scsi_cmnd *cmd); #ifdef CONFIG_SCSI_DMA extern int scsi_dma_map(struct scsi_cmnd *cmd); extern void scsi_dma_unmap(struct scsi_cmnd *cmd); #else /* !CONFIG_SCSI_DMA */ static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; } static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { } #endif /* !CONFIG_SCSI_DMA */ static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd) { return cmd->sdb.table.nents; } static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd) { return cmd->sdb.table.sgl; } static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd) { return cmd->sdb.length; } static inline void scsi_set_resid(struct scsi_cmnd *cmd, unsigned int resid) { cmd->resid_len = resid; } static inline unsigned int scsi_get_resid(struct scsi_cmnd *cmd) { return cmd->resid_len; } #define scsi_for_each_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_sglist(cmd), sg, nseg, __i) static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd, const void *buf, int buflen) { return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, buflen); } static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd, void *buf, int buflen) { return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, buflen); } static inline sector_t scsi_get_sector(struct scsi_cmnd *scmd) { return blk_rq_pos(scsi_cmd_to_rq(scmd)); } static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd) { unsigned int shift = ilog2(scmd->device->sector_size) - SECTOR_SHIFT; return blk_rq_pos(scsi_cmd_to_rq(scmd)) >> shift; } static inline unsigned int scsi_logical_block_count(struct scsi_cmnd *scmd) { unsigned int shift = ilog2(scmd->device->sector_size) - SECTOR_SHIFT; return blk_rq_bytes(scsi_cmd_to_rq(scmd)) >> shift; } /* * The operations below are hints that tell the controller driver how * to handle I/Os with DIF or similar types of protection information. */ enum scsi_prot_operations { /* Normal I/O */ SCSI_PROT_NORMAL = 0, /* OS-HBA: Protected, HBA-Target: Unprotected */ SCSI_PROT_READ_INSERT, SCSI_PROT_WRITE_STRIP, /* OS-HBA: Unprotected, HBA-Target: Protected */ SCSI_PROT_READ_STRIP, SCSI_PROT_WRITE_INSERT, /* OS-HBA: Protected, HBA-Target: Protected */ SCSI_PROT_READ_PASS, SCSI_PROT_WRITE_PASS, }; static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op) { scmd->prot_op = op; } static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd) { return scmd->prot_op; } enum scsi_prot_flags { SCSI_PROT_TRANSFER_PI = 1 << 0, SCSI_PROT_GUARD_CHECK = 1 << 1, SCSI_PROT_REF_CHECK = 1 << 2, SCSI_PROT_REF_INCREMENT = 1 << 3, SCSI_PROT_IP_CHECKSUM = 1 << 4, }; /* * The controller usually does not know anything about the target it * is communicating with. However, when DIX is enabled the controller * must be know target type so it can verify the protection * information passed along with the I/O. */ enum scsi_prot_target_type { SCSI_PROT_DIF_TYPE0 = 0, SCSI_PROT_DIF_TYPE1, SCSI_PROT_DIF_TYPE2, SCSI_PROT_DIF_TYPE3, }; static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type) { scmd->prot_type = type; } static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd) { return scmd->prot_type; } static inline u32 scsi_prot_ref_tag(struct scsi_cmnd *scmd) { struct request *rq = blk_mq_rq_from_pdu(scmd); return t10_pi_ref_tag(rq); } static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd) { return scmd->device->sector_size; } static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd) { return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0; } static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd) { return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL; } static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) { return cmd->prot_sdb; } #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) static inline void set_status_byte(struct scsi_cmnd *cmd, char status) { cmd->result = (cmd->result & 0xffffff00) | status; } static inline u8 get_status_byte(struct scsi_cmnd *cmd) { return cmd->result & 0xff; } static inline void set_host_byte(struct scsi_cmnd *cmd, char status) { cmd->result = (cmd->result & 0xff00ffff) | (status << 16); } static inline u8 get_host_byte(struct scsi_cmnd *cmd) { return (cmd->result >> 16) & 0xff; } /** * scsi_msg_to_host_byte() - translate message byte * * Translate the SCSI parallel message byte to a matching * host byte setting. A message of COMMAND_COMPLETE indicates * a successful command execution, any other message indicate * an error. As the messages themselves only have a meaning * for the SCSI parallel protocol this function translates * them into a matching host byte value for SCSI EH. */ static inline void scsi_msg_to_host_byte(struct scsi_cmnd *cmd, u8 msg) { switch (msg) { case COMMAND_COMPLETE: break; case ABORT_TASK_SET: set_host_byte(cmd, DID_ABORT); break; case TARGET_RESET: set_host_byte(cmd, DID_RESET); break; default: set_host_byte(cmd, DID_ERROR); break; } } static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) { unsigned int xfer_len = scmd->sdb.length; unsigned int prot_interval = scsi_prot_interval(scmd); if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI) xfer_len += (xfer_len >> ilog2(prot_interval)) * 8; return xfer_len; } extern void scsi_build_sense(struct scsi_cmnd *scmd, int desc, u8 key, u8 asc, u8 ascq); struct request *scsi_alloc_request(struct request_queue *q, blk_opf_t opf, blk_mq_req_flags_t flags); #endif /* _SCSI_SCSI_CMND_H */