#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2. # It tries to exercise as many code paths in the eRP state machine as # possible. lib_dir=$(dirname $0)/../../../../net/forwarding ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ multiple_masks_test ctcam_edge_cases_test delta_simple_test \ delta_two_masks_one_key_test delta_simple_rehash_test \ bloom_simple_test bloom_complex_test bloom_delta_test \ max_erp_entries_test max_group_size_test" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/tc_common.sh source $lib_dir/devlink_lib.sh tcflags="skip_hw" h1_create() { simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 } h1_destroy() { simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 } h2_create() { simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 tc qdisc add dev $h2 clsact } h2_destroy() { tc qdisc del dev $h2 clsact simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 } tp_record() { local tracepoint=$1 local cmd=$2 perf record -q -e $tracepoint $cmd return $? } tp_record_all() { local tracepoint=$1 local seconds=$2 perf record -a -q -e $tracepoint sleep $seconds return $? } __tp_hit_count() { local tracepoint=$1 local perf_output=`perf script -F trace:event,trace` return `echo $perf_output | grep "$tracepoint:" | wc -l` } tp_check_hits() { local tracepoint=$1 local count=$2 __tp_hit_count $tracepoint if [[ "$?" -ne "$count" ]]; then return 1 fi return 0 } tp_check_hits_any() { local tracepoint=$1 __tp_hit_count $tracepoint if [[ "$?" -eq "0" ]]; then return 1 fi return 0 } single_mask_test() { # When only a single mask is required, the device uses the master # mask and not the eRP table. Verify that under this mode the right # filter is matched RET=0 tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Single filter - did not match" tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 198.51.100.2 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 2 check_err $? "Two filters - did not match highest priority" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Two filters - did not match lowest priority" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Single filter - did not match after delete" tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "single mask test ($tcflags)" } identical_filters_test() { # When two filters that only differ in their priority are used, # one needs to be inserted into the C-TCAM. This test verifies # that filters are correctly spilled to C-TCAM and that the right # filter is matched RET=0 tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.2 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Did not match A-TCAM filter" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match C-TCAM filter after A-TCAM delete" tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.0.2.2 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Did not match C-TCAM filter after A-TCAM add" tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 103 1 check_err $? "Did not match A-TCAM filter after C-TCAM delete" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower log_test "identical filters test ($tcflags)" } two_masks_test() { # When more than one mask is required, the eRP table is used. This # test verifies that the eRP table is correctly allocated and used RET=0 tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.0.0.0/8 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Two filters - did not match highest priority" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 103 1 check_err $? "Single filter - did not match" tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.0/24 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Two filters - did not match highest priority after add" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "two masks test ($tcflags)" } multiple_masks_test() { # The number of masks in a region is limited. Once the maximum # number of masks has been reached filters that require new # masks are spilled to the C-TCAM. This test verifies that # spillage is performed correctly and that the right filter is # matched if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi local index RET=0 NUM_MASKS=32 NUM_ERPS=16 BASE_INDEX=100 for i in $(eval echo {1..$NUM_MASKS}); do index=$((BASE_INDEX - i)) if ((i > NUM_ERPS)); then exp_hits=1 err_msg="$i filters - C-TCAM spill did not happen when it was expected" else exp_hits=0 err_msg="$i filters - C-TCAM spill happened when it should not" fi tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ "tc filter add dev $h2 ingress protocol ip pref $index \ handle $index \ flower $tcflags \ dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \ action drop" tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ $exp_hits check_err $? "$err_msg" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ -B 192.0.2.2 -t ip -q tc_check_packets "dev $h2 ingress" $index 1 check_err $? "$i filters - did not match highest priority (add)" done for i in $(eval echo {$NUM_MASKS..1}); do index=$((BASE_INDEX - i)) $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ -B 192.0.2.2 -t ip -q tc_check_packets "dev $h2 ingress" $index 2 check_err $? "$i filters - did not match highest priority (del)" tc filter del dev $h2 ingress protocol ip pref $index \ handle $index flower done log_test "multiple masks test ($tcflags)" } ctcam_two_atcam_masks_test() { RET=0 # First case: C-TCAM is disabled when there are two A-TCAM masks. # We push a filter into the C-TCAM by using two identical filters # as in identical_filters_test() # Filter goes into A-TCAM tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop # Filter goes into C-TCAM tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.2 action drop # Filter goes into A-TCAM tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.0.0.0/16 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Did not match A-TCAM filter" # Delete both A-TCAM and C-TCAM filters and make sure the remaining # A-TCAM filter still works tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 103 1 check_err $? "Did not match A-TCAM filter" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower log_test "ctcam with two atcam masks test ($tcflags)" } ctcam_one_atcam_mask_test() { RET=0 # Second case: C-TCAM is disabled when there is one A-TCAM mask. # The test is similar to identical_filters_test() # Filter goes into A-TCAM tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.2 action drop # Filter goes into C-TCAM tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Did not match C-TCAM filter" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match A-TCAM filter" tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "ctcam with one atcam mask test ($tcflags)" } ctcam_no_atcam_masks_test() { RET=0 # Third case: C-TCAM is disabled when there are no A-TCAM masks # This test exercises the code path that transitions the eRP table # to its initial state after deleting the last C-TCAM mask # Filter goes into A-TCAM tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop # Filter goes into C-TCAM tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.2 action drop tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "ctcam with no atcam masks test ($tcflags)" } ctcam_edge_cases_test() { # When the C-TCAM is disabled after deleting the last C-TCAM # mask, we want to make sure the eRP state machine is put in # the correct state ctcam_two_atcam_masks_test ctcam_one_atcam_mask_test ctcam_no_atcam_masks_test } delta_simple_test() { # The first filter will create eRP, the second filter will fit into # the first eRP with delta. Remove the first rule then and check that # the eRP stays (referenced by the second filter). RET=0 if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \ action drop" tp_check_hits "objagg:objagg_obj_root_create" 1 check_err $? "eRP was not created" tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ action drop" tp_check_hits "objagg:objagg_obj_root_create" 0 check_err $? "eRP was incorrectly created" tp_check_hits "objagg:objagg_obj_parent_assign" 1 check_err $? "delta was not created" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match on correct filter" tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ pref 1 handle 101 flower" tp_check_hits "objagg:objagg_obj_root_destroy" 0 check_err $? "eRP was incorrectly destroyed" tp_check_hits "objagg:objagg_obj_parent_unassign" 0 check_err $? "delta was incorrectly destroyed" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Did not match on correct filter after the first was removed" tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ pref 2 handle 102 flower" tp_check_hits "objagg:objagg_obj_parent_unassign" 1 check_err $? "delta was not destroyed" tp_check_hits "objagg:objagg_obj_root_destroy" 1 check_err $? "eRP was not destroyed" log_test "delta simple test ($tcflags)" } delta_two_masks_one_key_test() { # If 2 keys are the same and only differ in mask in a way that # they belong under the same ERP (second is delta of the first), # there should be no C-TCAM spill. RET=0 if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \ action drop" tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 check_err $? "incorrect C-TCAM spill while inserting the first rule" tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ action drop" tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 check_err $? "incorrect C-TCAM spill while inserting the second rule" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Did not match on correct filter" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match on correct filter" tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "delta two masks one key test ($tcflags)" } delta_simple_rehash_test() { RET=0 if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 0 check_err $? "Failed to set ACL region rehash interval" tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_fail $? "Rehash trace was hit even when rehash should be disabled" devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 3000 check_err $? "Failed to set ACL region rehash interval" sleep 1 tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.1.0/25 action drop tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.0.2.2 action drop tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.0.3.0/24 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match on correct filter" tp_record_all mlxsw:* 3 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_err $? "Rehash trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate check_err $? "Migrate trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end check_err $? "Migrate end trace was not hit" tp_record_all mlxsw:* 3 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_err $? "Rehash trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate check_fail $? "Migrate trace was hit when no migration should happen" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end check_fail $? "Migrate end trace was hit when no migration should happen" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Did not match on correct filter after rehash" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower log_test "delta simple rehash test ($tcflags)" } delta_simple_ipv6_rehash_test() { RET=0 if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 0 check_err $? "Failed to set ACL region rehash interval" tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_fail $? "Rehash trace was hit even when rehash should be disabled" devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 3000 check_err $? "Failed to set ACL region rehash interval" sleep 1 tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ $tcflags dst_ip 2001:db8:1::0/121 action drop tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ $tcflags dst_ip 2001:db8:2::2 action drop tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ $tcflags dst_ip 2001:db8:3::0/120 action drop $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match on correct filter" tp_record_all mlxsw:* 3 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_err $? "Rehash trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate check_err $? "Migrate trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end check_err $? "Migrate end trace was not hit" tp_record_all mlxsw:* 3 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_err $? "Rehash trace was not hit" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate check_fail $? "Migrate trace was hit when no migration should happen" tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end check_fail $? "Migrate end trace was hit when no migration should happen" $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Did not match on correct filter after rehash" tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower log_test "delta simple IPv6 rehash test ($tcflags)" } TEST_RULE_BASE=256 declare -a test_rules_inserted test_rule_add() { local iface=$1 local tcflags=$2 local index=$3 if ! [ ${test_rules_inserted[$index]} ] ; then test_rules_inserted[$index]=false fi if ${test_rules_inserted[$index]} ; then return fi local number=$(( $index + $TEST_RULE_BASE )) printf -v hexnumber '%x' $number batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \ handle $number flower $tcflags \ src_ip 2001:db8:1::$hexnumber action drop\n" test_rules_inserted[$index]=true } test_rule_del() { local iface=$1 local index=$2 if ! [ ${test_rules_inserted[$index]} ] ; then test_rules_inserted[$index]=false fi if ! ${test_rules_inserted[$index]} ; then return fi local number=$(( $index + $TEST_RULE_BASE )) printf -v hexnumber '%x' $number batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \ handle $number flower\n" test_rules_inserted[$index]=false } test_rule_add_or_remove() { local iface=$1 local tcflags=$2 local index=$3 if ! [ ${test_rules_inserted[$index]} ] ; then test_rules_inserted[$index]=false fi if ${test_rules_inserted[$index]} ; then test_rule_del $iface $index else test_rule_add $iface $tcflags $index fi } test_rule_add_or_remove_random_batch() { local iface=$1 local tcflags=$2 local total_count=$3 local skip=0 local count=0 local MAXSKIP=20 local MAXCOUNT=20 for ((i=1;i<=total_count;i++)); do if (( $skip == 0 )) && (($count == 0)); then ((skip=$RANDOM % $MAXSKIP + 1)) ((count=$RANDOM % $MAXCOUNT + 1)) fi if (( $skip != 0 )); then ((skip-=1)) else ((count-=1)) test_rule_add_or_remove $iface $tcflags $i fi done } delta_massive_ipv6_rehash_test() { RET=0 if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 0 check_err $? "Failed to set ACL region rehash interval" tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash check_fail $? "Rehash trace was hit even when rehash should be disabled" RANDOM=4432897 declare batch="" test_rule_add_or_remove_random_batch $h2 $tcflags 5000 echo -n -e $batch | tc -b - declare batch="" test_rule_add_or_remove_random_batch $h2 $tcflags 5000 devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 3000 check_err $? "Failed to set ACL region rehash interval" sleep 1 tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ $tcflags dst_ip 2001:db8:1::0/121 action drop tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ $tcflags dst_ip 2001:db8:2::2 action drop tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ $tcflags dst_ip 2001:db8:3::0/120 action drop $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter" tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Did not match on correct filter" echo -n -e $batch | tc -b - devlink dev param set $DEVLINK_DEV \ name acl_region_rehash_interval cmode runtime value 0 check_err $? "Failed to set ACL region rehash interval" $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q tc_check_packets "dev $h2 ingress" 101 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 103 1 check_fail $? "Matched a wrong filter after rehash" tc_check_packets "dev $h2 ingress" 102 2 check_err $? "Did not match on correct filter after rehash" tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower declare batch="" for i in {1..5000}; do test_rule_del $h2 $tcflags $i done echo -e $batch | tc -b - log_test "delta massive IPv6 rehash test ($tcflags)" } bloom_simple_test() { # Bloom filter requires that the eRP table is used. This test # verifies that Bloom filter is not harming correctness of ACLs. # First, make sure that eRP table is used and then set rule patterns # which are distant enough and will result skipping a lookup after # consulting the Bloom filter. Although some eRP lookups are skipped, # the correct filter should be hit. RET=0 tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 action drop tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \ $tcflags dst_ip 198.51.100.2 action drop tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.0.0.0/8 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 101 1 check_err $? "Two filters - did not match highest priority" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 104 1 check_err $? "Single filter - did not match" tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 103 1 check_err $? "Low prio filter - did not match" tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 198.0.0.0/8 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Two filters - did not match highest priority after add" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower log_test "bloom simple test ($tcflags)" } bloom_complex_test() { # Bloom filter index computation is affected from region ID, eRP # ID and from the region key size. In order to excercise those parts # of the Bloom filter code, use a series of regions, each with a # different key size and send packet that should hit all of them. local index RET=0 NUM_CHAINS=4 BASE_INDEX=100 # Create chain with up to 2 key blocks (ip_proto only) tc chain add dev $h2 ingress chain 1 protocol ip flower \ ip_proto tcp &> /dev/null # Create chain with 2-4 key blocks (ip_proto, src MAC) tc chain add dev $h2 ingress chain 2 protocol ip flower \ ip_proto tcp \ src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null # Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest) tc chain add dev $h2 ingress chain 3 protocol ip flower \ ip_proto tcp \ dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ dst_ip 0.0.0.0/32 &> /dev/null # Default chain contains all fields and therefore is 8-12 key blocks tc chain add dev $h2 ingress chain 4 # We need at least 2 rules in every region to have eRP table active # so create a dummy rule per chain using a different pattern for i in $(eval echo {0..$NUM_CHAINS}); do index=$((BASE_INDEX - 1 - i)) tc filter add dev $h2 ingress chain $i protocol ip \ pref 2 handle $index flower \ $tcflags ip_proto tcp action drop done # Add rules to test Bloom filter, each in a different chain index=$BASE_INDEX tc filter add dev $h2 ingress protocol ip \ pref 1 handle $((++index)) flower \ $tcflags dst_ip 192.0.0.0/16 action goto chain 1 tc filter add dev $h2 ingress chain 1 protocol ip \ pref 1 handle $((++index)) flower \ $tcflags action goto chain 2 tc filter add dev $h2 ingress chain 2 protocol ip \ pref 1 handle $((++index)) flower \ $tcflags src_mac $h1mac action goto chain 3 tc filter add dev $h2 ingress chain 3 protocol ip \ pref 1 handle $((++index)) flower \ $tcflags dst_ip 192.0.0.0/8 action goto chain 4 tc filter add dev $h2 ingress chain 4 protocol ip \ pref 1 handle $((++index)) flower \ $tcflags src_ip 192.0.2.0/24 action drop # Send a packet that is supposed to hit all chains $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q for i in $(eval echo {0..$NUM_CHAINS}); do index=$((BASE_INDEX + i + 1)) tc_check_packets "dev $h2 ingress" $index 1 check_err $? "Did not match chain $i" done # Rules cleanup for i in $(eval echo {$NUM_CHAINS..0}); do index=$((BASE_INDEX - i - 1)) tc filter del dev $h2 ingress chain $i \ pref 2 handle $index flower index=$((BASE_INDEX + i + 1)) tc filter del dev $h2 ingress chain $i \ pref 1 handle $index flower done # Chains cleanup for i in $(eval echo {$NUM_CHAINS..1}); do tc chain del dev $h2 ingress chain $i done log_test "bloom complex test ($tcflags)" } bloom_delta_test() { # When multiple masks are used, the eRP table is activated. When # masks are close enough (delta) the masks reside on the same # eRP table. This test verifies that the eRP table is correctly # allocated and used in delta condition and that Bloom filter is # still functional with delta. RET=0 tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ $tcflags dst_ip 192.1.0.0/16 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 103 1 check_err $? "Single filter - did not match" tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ $tcflags dst_ip 192.2.1.0/24 action drop $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \ -t ip -q tc_check_packets "dev $h2 ingress" 102 1 check_err $? "Delta filters - did not match second filter" tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower log_test "bloom delta test ($tcflags)" } max_erp_entries_test() { # The number of eRP entries is limited. Once the maximum number of eRPs # has been reached, filters cannot be added. This test verifies that # when this limit is reached, inserstion fails without crashing. RET=0 local num_masks=32 local num_regions=15 local chain_failed local mask_failed local ret if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi for ((i=1; i < $num_regions; i++)); do for ((j=$num_masks; j >= 0; j--)); do tc filter add dev $h2 ingress chain $i protocol ip \ pref $i handle $j flower $tcflags \ dst_ip 192.1.0.0/$j &> /dev/null ret=$? if [ $ret -ne 0 ]; then chain_failed=$i mask_failed=$j break 2 fi done done # We expect to exceed the maximum number of eRP entries, so that # insertion eventually fails. Otherwise, the test should be adjusted to # add more filters. check_fail $ret "expected to exceed number of eRP entries" for ((; i >= 1; i--)); do for ((j=0; j <= $num_masks; j++)); do tc filter del dev $h2 ingress chain $i protocol ip \ pref $i handle $j flower &> /dev/null done done log_test "max eRP entries test ($tcflags). " \ "max chain $chain_failed, mask $mask_failed" } max_group_size_test() { # The number of ACLs in an ACL group is limited. Once the maximum # number of ACLs has been reached, filters cannot be added. This test # verifies that when this limit is reached, insertion fails without # crashing. RET=0 local num_acls=32 local max_size local ret if [[ "$tcflags" != "skip_sw" ]]; then return 0; fi for ((i=1; i < $num_acls; i++)); do if [[ $(( i % 2 )) == 1 ]]; then tc filter add dev $h2 ingress pref $i proto ipv4 \ flower $tcflags dst_ip 198.51.100.1/32 \ ip_proto tcp tcp_flags 0x01/0x01 \ action drop &> /dev/null else tc filter add dev $h2 ingress pref $i proto ipv6 \ flower $tcflags dst_ip 2001:db8:1::1/128 \ action drop &> /dev/null fi ret=$? [[ $ret -ne 0 ]] && max_size=$((i - 1)) && break done # We expect to exceed the maximum number of ACLs in a group, so that # insertion eventually fails. Otherwise, the test should be adjusted to # add more filters. check_fail $ret "expected to exceed number of ACLs in a group" for ((; i >= 1; i--)); do if [[ $(( i % 2 )) == 1 ]]; then tc filter del dev $h2 ingress pref $i proto ipv4 \ flower $tcflags dst_ip 198.51.100.1/32 \ ip_proto tcp tcp_flags 0x01/0x01 \ action drop &> /dev/null else tc filter del dev $h2 ingress pref $i proto ipv6 \ flower $tcflags dst_ip 2001:db8:1::1/128 \ action drop &> /dev/null fi done log_test "max ACL group size test ($tcflags). max size $max_size" } setup_prepare() { h1=${NETIFS[p1]} h2=${NETIFS[p2]} h1mac=$(mac_get $h1) h2mac=$(mac_get $h2) vrf_prepare h1_create h2_create } cleanup() { pre_cleanup h2_destroy h1_destroy vrf_cleanup } trap cleanup EXIT setup_prepare setup_wait tests_run if ! tc_offload_check; then check_err 1 "Could not test offloaded functionality" log_test "mlxsw-specific tests for tc flower" exit else tcflags="skip_sw" tests_run fi exit $EXIT_STATUS