wireguard-openbsd/sys/arch/hppa/dev/asp.c, branch jd/queueboosts

Relax the way irqs are assigned. This diff does:

2018-05-14T13:54:39Z

- dynamic allocation of interrupts for dino(4) and gsc(4) - only mention irq locators for devices which use interrupts. - for gsc(4), this actually postpones interrupt allocation until gsc(4) attaches, so asp(4)/lasi(4)/wax(4) won't route the interrupt yet, but the gsc(4) child will take care of this. - remove the irq locator for the drivers which do not need a fixed assignment. siop and moongoose could benefit from this but don't work at the moment so this is left as an exercize to future kernel hackers. A side effect from this is that we do not need multiple sti(4) attachment lines, so PCI sti(4) devices will now attach as sti0 rather than sti2. With this diff, multiple dino(4) devices attached to the same parent will use different interrupt sources, and more than two dino(4) devices can attach. Tested on 715/75 (old-gen using asp), 715/100/XC (new-gen using lasi), B132L+, B180L, C240, B2000, C3650. From miod@

it appears asp occupies more space than intially thought and

2005-06-09T18:01:36Z

audio wraps off the edge making troubles. make sure gsc attachment follows the amsk from the parents and also extend the asp's range to a full 512m. found by Graham Gower on 735 testing by miod@ on 715

update copyright; miod@ is fine w/ files where he holds it too

2004-04-07T18:24:19Z

just wate that debug altogether

2003-04-08T20:48:39Z

Make dmesg prettier if attachment fails and no option DEBUG

2003-04-08T20:37:39Z

Let kernels compile without DDB, USELEDS, and DIAGNOSTIC.

2003-02-18T09:40:40Z

For future intallation media.

newer machines use phantom bus to attach lasi and other bus adapters.

2002-12-18T23:52:41Z

oledr machines did not have a real device for the phantom bus port. change the device scanning technique to both include a full device path in the attach_args and do proper shifting in the pdc_scanbus() and add a device for the newer machines as well as use a newer device mapping (path to hpa) available on newer firmware versions, where old (hversion-dependant) is not available. tested on 712,715/33,c110, miod@ ok, weissmandude -- testing

real interrupts/spl framework.

2002-12-17T21:54:20Z

tested on 712/* 715/100, 715/33 which main cpu/bus types. miod@ ok

do not forget to set the hpamask

2002-04-22T01:48:37Z

First round of __P removal in sys

2002-03-14T01:26:25Z