| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 74139a64e8cedb6d971c78d5d17384efeced1725 upstream.
Add missing of_node_put() calls to release
device node references obtained via of_parse_phandle().
Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250902075943.2408832-1-linmq006@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a6506e1ba0d2b831729808d958aae77604f12f9 upstream.
There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].
"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples
The state of the EMU[1:0] terminals are latched during reset to determine
ICEPick boot mode. For normal device operation, these terminals must be
pulled up to a valid high logic level ( > VIH min) before ICEPick samples
the state of these terminals, which occurs
[five CLK_M_OSC clock cycles - 10 ns] after the falling edge of WARMRSTn.
Many applications may not require the secondary GPIO function of the
EMU[1:0] terminals. In this case, they would only be connected to pull-up
resistors, which ensures they are always high when ICEPick samples.
However, some applications may need to use these terminals as GPIO where
they could be driven low before reset is asserted. This usage of the
EMU[1:0] terminals may require special attention to ensure the terminals
are allowed to return to a valid high-logic level before ICEPick samples
the state of these terminals.
When any device reset is asserted, the pin mux mode of EMU[1:0] terminals
configured to operate as GPIO (mode 7) will change back to EMU input
(mode 0) on the falling edge of WARMRSTn. This only provides a short period
of time for the terminals to return high if driven low before reset is
asserted...
If the EMU[1:0] terminals are configured to operate as GPIO, the product
should be designed such these terminals can be pulled to a valid high-logic
level within 190 ns after the falling edge of WARMRSTn."
We've noticed this problem with custom am335x hardware in combination with
recently implemented cold reset method
(commit 6521f6a195c70 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")).
It looks like the problem can affect other HW, for instance AM335x
Chiliboard, because the latter has LEDs on GPIO3_7/GPIO3_8 as well.
One option would be to check if the pins are in GPIO mode and either switch
to output active high, or switch to input and poll until the external
pull-ups have brought the pins to the desired high state. But fighting
with GPIO driver for these pins is probably not the most straight forward
approch in a reboot handler.
Fortunately we can easily control pinmuxing here and rely on the external
pull-ups. TI recommends 4k7 external pull up resistors [2] and even with
quite conservative estimation for pin capacity (1 uF should never happen)
the required delay shall not exceed 5ms.
[1] Link: https://www.ti.com/lit/pdf/sprz360
[2] Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/866346/am3352-emu-1-0-questions
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250717152708.487891-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 27322753c8b913fba05250e7b5abb1da31e6ed23 ]
The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.
This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.
Remove this unused property to fix the schema validation warning.
Fixes: 48ab364478e77 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5af5b85505bc859adb338fe5d6e4842e72cdf932 ]
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30e6 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9658a92fad1889ff92fa4bd668cd61052687245a ]
The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.
Fixes: 262178b6b8e5 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b367e60c73c05721cf2156fe8fe077320115ffd ]
The stm32-i2s binding inherits from the standard audio-graph-port
schema for its 'port' subnode, audio-graph-port requires the use
of the 'dai-format' property. The stm32mp151c-plyaqm dts file was
using the non-standard name 'format'.
Correct the property name to 'dai-format' to fix the dtbs_check
validation error.
Fixes: 9365fa46be358 ("ARM: dts: stm32: Add Plymovent AQM devicetree")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830225115.303663-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 296302d3d81360e09fa956e9be9edc8223b69a12 ]
The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.
Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.
Fix function comment to match tmp variables actually used.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 28eb1d40fe57 ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 287066b295051729fb08c3cff12ae17c6fe66133 ]
According to the schematics, the CAN transceiver is connected to pins
GP7_3 and GP7_4, which correspond to CAN0 data group B.
Fixes: 0768fbad7fba1d27 ("ARM: shmobile: porter: add CAN0 DT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/70ad9bc44d6cea92197c42eedcad6b3d0641d26a.1751032025.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbc46b23af5bb934cd1cf066ef4342cee457a24e ]
With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull ARM fix from Russell King:
"Just one fix to the module freeing function that was declared __weak
when it should not have been. Thanks to Petr Pavlu for spotting this"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9458/1: module: Ensure the override of module_arch_freeing_init()
|
|
Pull SoC fixes from Arnd Bergmann:
"There are a few minor code fixes for tegra firmware, i.MX firmware
and the eyeq reset controller, and a MAINTAINERS update as Alyssa
Rosenzweig moves on to non-kernel projects.
The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash"
* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: remove Alyssa Rosenzweig
firmware: tegra: Do not warn on missing memory-region property
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
reset: eyeq: fix OF node leak
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
ARM: dts: allwinner: Minor whitespace cleanup
|
|
Allwinner fixes for 6.17
Two device tree style cleanups from the device tree maintainers.
* tag 'sunxi-fixes-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
ARM: dts: allwinner: Minor whitespace cleanup
Link: https://lore.kernel.org/r/aMrsUfkTWx8g3bJ7@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The function module_arch_freeing_init() defined in arch/arm/kernel/module.c
is supposed to override a weak function of the same name defined in
kernel/module/main.c. However, the ARM override is also marked as weak,
which means that selecting the correct function unnecessarily depends on
the order in which object files with both functions are passed to the
linker. Although it happens to be correct at the moment, the proper pattern
is to make the ARM override a strong definition.
Fixes: cdcb07e45a91 ("ARM: 8975/1: module: fix handling of unwind init sections")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
i.MX fixes for 6.17, round 2:
- Fix mach-imx Kconfig to select the correct PIT timer option
(Lukas Bulwahn)
- Correct thermal sensor index for i.MX8MP device tree (Peng Fan)
- Fix i.MX SCMI build error by adding stub API functions (Peng Fan)
* tag 'imx-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
Link: https://lore.kernel.org/r/aMQs2zr4fYl2DYVr@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
SoCFPGA DTS fix for v6.17
- Fix midio bus probe and PHY address for cylone5 sodia board
* tag 'socfpga_dts_fix_for_v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
Link: https://lore.kernel.org/r/20250907123058.175447-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu fixes for 6.17 (part 1)
Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.
* tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
Link: https://lore.kernel.org/r/87ikhnn1pl.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A previous commit changed the '#sound-dai-cells' property for the
kirkwood audio controller from 1 to 0 in the kirkwood.dtsi file,
but did not update the corresponding 'sound-dai' property in the
kirkwood-openrd-client.dts file.
This created a mismatch, causing a dtbs_check validation error where
the dts provides one cell (<&audio0 0>) while the .dtsi expects zero.
Remove the extraneous cell from the 'sound-dai' property to fix the
schema validation warning and align with the updated binding.
Fixes: e662e70fa419 ("arm: dts: kirkwood: fix error in #sound-dai-cells size")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Commit 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP
PIT") renames the config VF_PIT_TIMER to NXP_PIT_TIMER, but it misses
adjusting a reference to VF_PIT_TIMER in arch/arm/mach-imx/Kconfig.
Adjust the config reference to the new name.
Fixes: 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be
found and the network device does not work.
```
stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
```
To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the
mdio bus. Also the PHY address connected to this board is 4. Therefore,
change to 4.
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.
In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.
Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.
Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.
Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"
* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...
|
|
Microchip AT91 fixes for v6.17
This update includes:
- adaptation to the SDHCI capabilities on sama7d65 curiosity board DT as
SDHCI quirks are not in place yet. SD/MMC don't work without these
- addition of one Kconfig symbol that is already used in DMA tree for
6.17. XDMA cannot be selected if not present.
* tag 'at91-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
Link: https://lore.kernel.org/r/20250903173403.113604-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SDMMC in this IP currently only supports legacy mode
due to a hardware quirk, setting the flags to reflect the limitation.
Fixes: deaa14ab6b06 ("ARM: dts: microchip: add support for sama7d65_curiosity board")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250819170528.126010-1-Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Like with the ARM64 Microchip platforms, lets add a generic ARCH_MICROCHIP
symbol and select it so that drivers that are reused for multiple product
generation or lines, can just depend on it instead of adding each SoC
symbol as their dependencies.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20250813174720.540015-3-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
The recent kstack erase changes appear to have uncovered an existing
issue with a missing header inclusion:
In file included from drivers/misc/lkdtm/kstack_erase.c:12:
In file included from include/linux/kstack_erase.h:16:
arch/arm/include/asm/stacktrace.h:48:21: error: call to undeclared function 'in_entry_text'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
48 | frame->ex_frame = in_entry_text(frame->pc);
| ^
Include asm/sections.h here so the compiler can see the in_entry_text()
declaration.
Fixes: 752ec621ef5c ("ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value")
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250807071902.4077714-1-arnd@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250819131607.86338-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The simple-audio-card configuration for the Armada 370 development
board incorrectly routed the left channel signal ("AIN1L") to both
sides of the stereo "In Jack".
This commit corrects the typo for the right channel, changing the
second "AIN1L" entry to "AIN1R" to enable proper stereo input
recording.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819131752.86948-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
|
|
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Pull ARM update from Russell King:
"Just one development update this time:
- Finish removing Coresight support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9449/1: coresight: Finish removal of Coresight support in arch/arm/kernel
|
|
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
|
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
|
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
|
|
The Realtek and HDMI HD-audio codec configs have been slightly updated
again since the previous change. Follow the new kconfig changes for
multi_v7_defconfig and tegra_defconfig, and add a few other configs
for HDMI codecs, too.
Fixes: 1d8dd982c409 ("ALSA: hda/realtek: Enable drivers as default")
Fixes: 81231ad173d8 ("ALSA: hda/hdmi: Enable drivers as default")
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250731091109.16901-2-tiwai@suse.de
|
|
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
|
|
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
|
|
Commit fb52f3226cab ("ARM: s3c/gpio: use new line value setter
callbacks") correctly changed the assignment of the callback but missed
the check one liner higher. Change it now too to using the recommended
callback as the legacy one is going away soon.
Fixes: fb52f3226cab ("ARM: s3c/gpio: use new line value setter callbacks")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This pull request contains Device Tree fixes for Broadcom ARM-based SoC
platforms, please pull the following:
- Florian fixes the bcm7445.dtsi file to conform to the
brcm,brcm,brcmstb-memc-ddr.yaml binding after 501be7cecec9
("dt-bindings: memory-controller: Define fallback compatible")
* tag 'arm-soc/for-6.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
Pull ARM SoC code updates from Arnd Bergmann:
"Another small set of code changes for the 32-bit Arm platforms, and a
trivial update to the Kconfig entry for the arm64 TI K3 chip.
Andrew Davis cleans up the system reset handling, which touches a
couple of platforms.
The mediatek platform needs some code changes to support
multiprocessing in the newly added support for the old mt6572 chip"
* tag 'soc-arm-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: sa110/gpio: convert set_multiple() to returning an integer
ARM: rockchip: fix kernel hang during smp initialization
ARM: mediatek: add MT6572 smp bring up code
ARM: mediatek: add board_dt_compat entry for the MT6572 SoC
ARM: tegra: Use I/O memcpy to write to IRAM
arm: orion: use string choices helper
ARM: Switch to new sys-off handler API
arm64: Kconfig.platforms: remove useless select for ARCH_K3
|
|
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, more drivers get enabled in the defconfigs, to support newly
added hardware drivers.
There is one change for Tegra that modifies the Kconfig file at the
same time, and the NXP arm32 defconfigs get a refresh"
* tag 'soc-defconfig-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm: multi_v7_defconfig: Enable TPS65219 regulator
arm: omap2plus_defconfig: Enable TPS65219 regulator
arm64: defconfig: Enable Tegra241 and Tegra264
riscv: defconfig: spacemit: enable sdhci driver for K1 SoC
riscv: defconfig: Enable PWM support for SpacemiT K1 SoC
riscv: defconfig: Remove CONFIG_SND_SOC_STARFIVE=m
arm64: defconfig: Enable Tegra HSP and BPMP
ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503
ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
ARM: mxs_defconfig: Cleanup mxs_defconfig
arm64: defconfig: enable further Rockchip platform drivers
arm64: defconfig: enable Samsung PMIC over ACPM
arm64: defconfig: enable Maxim max77759 driver
ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO
ARM: shmobile: defconfig: Refresh for v6.16-rc2
arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver
arm64: defconfig: add S32G RTC module support
arm64: defconfig: Drop unneeded unselectable sound drivers
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
|
|
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
|
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
|
|
Pull execve updates from Kees Cook:
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
fork: reorder function qualifiers for copy_clone_args_from_user
binfmt_elf: remove the 4k limitation of program header size
binfmt_elf: Warn on missing or suspicious regset note names
xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
...
|
Miaoqian Lin
Alexander Sverdlin
Jihed Chaibi
Nicolas Ferre
Geert Uytterhoeven
Simon Schuster
Linus Torvalds
Arnd Bergmann
Petr Pavlu
Lukas Bulwahn
Nobuhiro Iwamatsu
Ryan Wanner
Robert Marko
Krzysztof Kozlowski
Bartosz Golaszewski
Takashi Iwai