| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 0843ba458439f38efdc14aa359c14ad0127edb01 ]
Fadump allocates memory to pass additional kernel command-line argument
to the fadump kernel. However, this allocation is not needed when fadump
is disabled. So avoid allocating memory for the additional parameter
area in such cases.
Fixes: f4892c68ecc1 ("powerpc/fadump: allocate memory for additional parameters early")
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Fixes: f4892c68ecc1 ("powerpc/fadump: allocate memory for additional parameters early")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008032934.262683-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 661f951e371cc134ea31c84238dbdc9a898b8403 ]
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6b4df37ebfeb47e50e27780500d2d06b4d211bd ]
CONFIG_PPC_FTRACE_OUT_OF_LINE introduced setup_ftrace_ool_stubs() to
extend the ppc64le module .stubs section with an array of
ftrace_ool_stub structures for each patchable function.
Fix its ppc64_stub_entry stub reservation loop to properly write across
all of the num_stubs used and not just the first entry.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-3-joe.lawrence@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5337609a314828aa2474ac359db615f475c4a4d2 ]
When an ftrace call site is converted to a NOP, its corresponding
dyn_ftrace record should have its ftrace_ops pointer set to
ftrace_nop_ops.
Correct the powerpc implementation to ensure the
ftrace_rec_set_nop_ops() helper is called on all successful NOP
initialization paths. This ensures all ftrace records are consistent
before being handled by the ftrace core.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-2-joe.lawrence@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9e46de4bf5c5f987075afd5f240bb2a8a5d71ed ]
Commit ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") removed the test that needed the valeur in SPRN_EPN but
failed to remove the read.
Remove it.
And remove related comments, including the very same comment
in InstructionTLBMiss that should have been removed by
commit 33c527522f39 ("powerpc/8xx: Inconditionally use task PGDIR in
ITLB misses").
Also update the comment about absence of a second level table which
has been handled implicitely since commit 5ddb75cee5af ("powerpc/8xx:
remove tests on PGDIR entry validity").
Fixes: ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/5811c8d1d6187f280ad140d6c0ad6010e41eeaeb.1755361995.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbc46b23af5bb934cd1cf066ef4342cee457a24e ]
With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Fix "Double quote to prevent globbing and word splitting."
warning from shellcheck
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Stephen Rothwell <sfr@cab.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-3-maddy@linux.ibm.com
|
|
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes: cbe487fac7fc0 ("KVM: PPC: Add mtsrin PV code")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-1-maddy@linux.ibm.com
|
|
The extra-y syntax is planned for deprecation because it is similar
to always-y.
When building the boot wrapper, always-y and extra-y are equivalent.
Use always-y instead.
In arch/powerpc/kernel/Makefile, I added ifdef KBUILD_BUILTIN to
keep the current behavior: prom_init_check is skipped when building
only modular objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250602163302.478765-1-masahiroy@kernel.org
|
|
Simplify the code to enhance readability and maintain a consistent
coding style.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Acked-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250801035908.370463-1-zhao.xichao@vivo.com
|
|
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
|
|
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
|
Pull powerpc updates from Madhavan Srinivasan:
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani,
Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras,
Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas
Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao
Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh
Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar
Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois.
* tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
arch/powerpc: Remove .interp section in vmlinux
powerpc: Drop GPL boilerplate text with obsolete FSF address
powerpc: Don't use %pK through printk
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions
integrity/platform_certs: Allow loading of keys in the static key management mode
powerpc/secvar: Expose secvars relevant to the key management mode
powerpc/pseries: Correct secvar format representation for static key management
(powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer
powerpc: floppy: Add missing checks after DMA map
book3s64/radix : Optimize vmemmap start alignment
book3s64/radix : Handle error conditions properly in radix_vmemmap_populate
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits
powerpc: sysdev: use lock guard for mutex
powerpc: powernv: ocxl: use lock guard for mutex
powerpc: book3s: vas: use lock guard for mutex
powerpc: fadump: use lock guard for mutex
powerpc: rtas: use lock guard for mutex
powerpc: eeh: use lock guard for mutex
...
|
|
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
|
|
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
|
Pull execve updates from Kees Cook:
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
fork: reorder function qualifiers for copy_clone_args_from_user
binfmt_elf: remove the 4k limitation of program header size
binfmt_elf: Warn on missing or suspicious regset note names
xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
...
|
|
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
|
|
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
|
|
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1334208367.1359861.1752615503144.JavaMail.zimbra@raptorengineeringinc.com
|
|
The PowerNV hotplug driver needs to be able to clear any frozen PE(s)
on the PHB after suprise removal of a downstream device.
Export the eeh_unfreeze_pe() symbol to allow implementation of this
functionality in the php_nv module.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1778535414.1359858.1752615454618.JavaMail.zimbra@raptorengineeringinc.com
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250718-restricted-pointers-powerpc-v2-1-fd7bddd809f3@linutronix.de
|
|
Patch series "kdump: crashkernel reservation from CMA", v5.
This series implements a way to reserve additional crash kernel memory
using CMA.
Currently, all the memory for the crash kernel is not usable by the 1st
(production) kernel. It is also unmapped so that it can't be corrupted by
the fault that will eventually trigger the crash. This makes sense for
the memory actually used by the kexec-loaded crash kernel image and initrd
and the data prepared during the load (vmcoreinfo, ...). However, the
reserved space needs to be much larger than that to provide enough
run-time memory for the crash kernel and the kdump userspace. Estimating
the amount of memory to reserve is difficult. Being too careful makes
kdump likely to end in OOM, being too generous takes even more memory from
the production system. Also, the reservation only allows reserving a
single contiguous block (or two with the "low" suffix). I've seen systems
where this fails because the physical memory is fragmented.
By reserving additional crashkernel memory from CMA, the main crashkernel
reservation can be just large enough to fit the kernel and initrd image,
minimizing the memory taken away from the production system. Most of the
run-time memory for the crash kernel will be memory previously available
to userspace in the production system. As this memory is no longer
wasted, the reservation can be done with a generous margin, making kdump
more reliable. Kernel memory that we need to preserve for dumping is
normally not allocated from CMA, unless it is explicitly allocated as
movable. Currently this is only the case for memory ballooning and zswap.
Such movable memory will be missing from the vmcore. User data is
typically not dumped by makedumpfile. When dumping of user data is
intended this new CMA reservation cannot be used.
There are five patches in this series:
The first adds a new ",cma" suffix to the recenly introduced generic
crashkernel parsing code. parse_crashkernel() takes one more argument to
store the cma reservation size.
The second patch implements reserve_crashkernel_cma() which performs the
reservation. If the requested size is not available in a single range,
multiple smaller ranges will be reserved.
The third patch updates Documentation/, explicitly mentioning the
potential DMA corruption of the CMA-reserved memory.
The fourth patch adds a short delay before booting the kdump kernel,
allowing pending DMA transfers to finish.
The fifth patch enables the functionality for x86 as a proof of
concept. There are just three things every arch needs to do:
- call reserve_crashkernel_cma()
- include the CMA-reserved ranges in the physical memory map
- exclude the CMA-reserved ranges from the memory available
through /proc/vmcore by excluding them from the vmcoreinfo
PT_LOAD ranges.
Adding other architectures is easy and I can do that as soon as this
series is merged.
With this series applied, specifying
crashkernel=100M craskhernel=1G,cma
on the command line will make a standard crashkernel reservation
of 100M, where kexec will load the kernel and initrd.
An additional 1G will be reserved from CMA, still usable by the production
system. The crash kernel will have 1.1G memory available. The 100M can
be reliably predicted based on the size of the kernel and initrd.
The new cma suffix is completely optional. When no
crashkernel=size,cma is specified, everything works as before.
This patch (of 5):
Add a new cma_size parameter to parse_crashkernel(). When not NULL, call
__parse_crashkernel to parse the CMA reservation size from
"crashkernel=size,cma" and store it in cma_size.
Set cma_size to NULL in all calls to parse_crashkernel().
Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz
Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of having the core code guess the note name for each regset,
use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250701135616.29630-16-Dave.Martin@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Define a small SDTL_INIT(maskfn, flagsfn, name) macro and use it to build the
sched_domain_topology_level array. Purely a cleanup; behaviour is unchanged.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250710105715.66594-2-me@linux.beauty
|
|
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
use scoped_guard for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-4-sshegde@linux.ibm.com
|
|
use guard(mutex) for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-3-sshegde@linux.ibm.com
|
|
use guard(mutex) for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-2-sshegde@linux.ibm.com
|
|
uart_port::{serial_in,serial_out} (and plat_serial8250_port::* likewise)
historically use:
* 'unsigned int' for 32-bit register values in reads and writes, and
* 'int' for offsets.
Make them sane such that:
* 'u32' is used for register values, and
* 'unsigned int' is used for offsets.
While at it, name hooks' parameters, so it is clear what is what.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It makes the code easier to read as casts are not needed.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20250611100319.186924-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Caching the port and info in local variables makes the code more compact
and easier to understand.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca2d ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
|
|
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes: 7e3a68be42e1 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1fa3453f07d42a50a70114da9905bf7b73304fca.1747073669.git.christophe.leroy@csgroup.eu
|
|
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
|
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
|
|
Remove hard-coded strings by using the str_disabled_enabled() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210224246.363318-1-thorsten.blum@linux.dev
|
|
strcpy() is deprecated; use strscpy() instead.
Don't cast the destination buffer from 'u8[]' to 'char *' to satisfy the
__must_be_array() requirement of strscpy().
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250421183110.436265-1-thorsten.blum@linux.dev
|
|
Recent patch fixed an old commit
'fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")'
which is to include building of ppc_save_reg.c only when XMON
and KEXEC_CORE and PPC_BOOK3S are enabled. This was valid, since
ppc_save_regs was called only in replay_system_reset() of old
irq.c which was under BOOK3S.
But there has been multiple refactoring of irq.c and have
added call to ppc_save_regs() from __replay_soft_interrupts
-> replay_soft_interrupts which is part of irq_64.c included
under CONFIG_PPC64. And since ppc_save_regs is called in
CRASH_DUMP path as part of crash_setup_regs in kexec.h,
CONFIG_PPC32 also needs it.
So with this recent patch which enabled the building of
ppc_save_regs.c caused a build break when none of these
(XMON, KEXEC_CORE, BOOK3S) where enabled as part of config.
Patch to enable building of ppc_save_regs.c by defaults.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250511041111.841158-1-maddy@linux.ibm.com
|
|
When a kernel log containing --- at the start of a line is copied into
a patch message, 'git am' drops everything located after that ---.
Replace --- by ---- to avoid that.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/54a1f8d2c3fb5b95434039724c8c141052ae5cc0.1739346038.git.christophe.leroy@csgroup.eu
|
|
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250417105305.397128-1-jirislaby@kernel.org
|
|
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Reported-by: Viktor Malik <vmalik@redhat.com>
Closes: https://lore.kernel.org/lkml/1aec4a9a-a30b-43fd-b303-7a351caeccb7@redhat.com
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416191227.201146-1-hbathini@linux.ibm.com
|
|
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
|
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
|
|
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
|
Sourabh Jain
Peter Zijlstra
Joe Lawrence
Christophe Leroy
Simon Schuster
Madhavan Srinivasan
Masahiro Yamada
Xichao Zhao
Linus Torvalds
Timothy Pearson
Thomas Weißschuh
Jiri Bohac
Dave Martin
Li Chen
Andrey Albershteyn
Greg Kroah-Hartman
Shrikanth Hegde
Jiri Slaby (SUSE)
Thomas Weißschuh
Narayana Murty N
Thorsten Blum
Hari Bathini
Haren Myneni