aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-23Revert "drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume"Matthew Schwartz2-15/+4
commit 9858ea4c29c283f0a8a3cdbb42108d464ece90a8 upstream. This fix regressed the original issue that commit 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot") solved, so revert it until a different approach to solve the regression that it caused with AMD_PRIVATE_COLOR is found. Fixes: a490c8d77d50 ("drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4620 Cc: stable@vger.kernel.org Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19drm/amd/display: Fix unsafe uses of kernel mode FPUArd Biesheuvel6-7/+56
commit ddbfac152830e38d488ff8e45ab7eaf5d72f8527 upstream. The point of isolating code that uses kernel mode FPU in separate compilation units is to ensure that even implicit uses of, e.g., SIMD registers for spilling occur only in a context where this is permitted, i.e., from inside a kernel_fpu_begin/end block. This is important on arm64, which uses -mgeneral-regs-only to build all kernel code, with the exception of such compilation units where FP or SIMD registers are expected to be used. Given that the compiler may invent uses of FP/SIMD anywhere in such a unit, none of its code may be accessible from outside a kernel_fpu_begin/end block. This means that all callers into such compilation units must use the DC_FP start/end macros, which must not occur there themselves. For robustness, all functions with external linkage that reside there should call dc_assert_fp_enabled() to assert that the FPU context was set up correctly. Fix this for the DCN35, DCN351 and DCN36 implementations. Cc: Austin Zheng <austin.zheng@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <siqueira@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19drm/amd/display: Enable Dynamic DTBCLK SwitchFangzhi Zuo1-0/+4
commit 5949e7c4890c3cf65e783c83c355b95e21f10dba upstream. [WHAT] Since dcn35, DTBCLK can be disabled when no DP2 sink connected for power saving purpose. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19drm/amd/display: Incorrect Mirror CositingJesse Agate1-5/+5
commit d07e142641417e67f3bfc9d8ba3da8a69c39cfcd upstream. [WHY] hinit/vinit are incorrect in the case of mirroring. [HOW] Cositing sign must be flipped when image is mirrored in the vertical or horizontal direction. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Jesse Agate <jesse.agate@amd.com> Signed-off-by: Brendan Leder <breleder@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19drm/amd/display: Disable scaling on DCE6 for nowTimur Kristóf1-2/+2
[ Upstream commit 0e190a0446ec517666dab4691b296a9b758e590f ] Scaling doesn't work on DCE6 at the moment, the current register programming produces incorrect output when using fractional scaling (between 100-200%) on resolutions higher than 1080p. Disable it until we figure out how to program it properly. Fixes: 7c15fd86aaec ("drm/amd/display: dc/dce: add initial DCE6 support (v10)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19drm/amd/display: Properly disable scaling on DCE6Timur Kristóf2-4/+13
[ Upstream commit a7dc87f3448bea5ebe054f14e861074b9c289c65 ] SCL_SCALER_ENABLE can be used to enable/disable the scaler on DCE6. Program it to 0 when scaling isn't used, 1 when used. Additionally, clear some other registers when scaling is disabled and program the SCL_UPDATE register as recommended. This fixes visible glitches for users whose BIOS sets up a mode with scaling at boot, which DC was unable to clean up. Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6Timur Kristóf1-4/+2
[ Upstream commit c0aa7cf49dd6cb302fe28e7183992b772cb7420c ] Previously, the code would set a bit field which didn't exist on DCE6 so it would be effectively a no-op. Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIsTimur Kristóf1-0/+2
[ Upstream commit d60f9c45d1bff7e20ecd57492ef7a5e33c94a37c ] Without these, it's impossible to program these registers. Fixes: 102b2f587ac8 ("drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute functionsSrinivasan Shanmugam1-1/+7
[ Upstream commit bf4e4b97d0fdc66f04fc19d807e24dd8421b8f11 ] The function dc_stream_set_cursor_attributes() currently dereferences the `stream` pointer and nested members `stream->ctx->dc->current_state` without checking for NULL. All callers of these functions, such as in `dcn30_apply_idle_power_optimizations()` and `amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks before calling these functions. Fixes below: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes() error: we previously assumed 'stream' could be null (see line 334) drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 327 bool dc_stream_program_cursor_attributes( 328 struct dc_stream_state *stream, 329 const struct dc_cursor_attributes *attributes) 330 { 331 struct dc *dc; 332 bool reset_idle_optimizations = false; 333 334 dc = stream ? stream->ctx->dc : NULL; ^^^^^^ The old code assumed stream could be NULL. 335 --> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) { ^^^^^^ The refactor added an unchecked dereference. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 313 bool dc_stream_set_cursor_attributes( 314 struct dc_stream_state *stream, 315 const struct dc_cursor_attributes *attributes) 316 { 317 bool result = false; 318 319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here. This function used to check for if stream as NULL and return false at the start. Probably we should add that back. Fixes: 4465dd0e41e8 ("drm/amd/display: Refactor SubVP cursor limiting logic") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Alex Hung <alex.hung@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Ray Wu <ray.wu@amd.com> Cc: Dillon Varone <dillon.varone@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Dillon Varone <Dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15drm/amd/display: Remove redundant semicolonsLiao Yuanhong1-1/+0
[ Upstream commit 90b810dd859c0df9db2290da1ac5842e5f031267 ] Remove unnecessary semicolons. Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4Srinivasan Shanmugam5-31/+26
[ Upstream commit 1cf1205ef2685cf43db3785706b017d1e54e0bec ] The function `dp_retrain_link_dp_test` currently allocates a large audio_output array on the stack, causing the stack frame size to exceed the compiler limit (1080 bytes > 1024 bytes). This change prevents stack overflow issues: amdgpu/../display/dc/link/accessories/link_dp_cts.c:65:13: warning: stack frame size (1080) exceeds limit (1024) in 'dp_retrain_link_dp_test' [-Wframe-larger-than] static void dp_retrain_link_dp_test(struct dc_link *link, v2: Move audio-related data like `audio_output` is kept "per pipe" to manage the audio for that specific display pipeline/display output path (stream). (Wenjing) v3: Update in all the places where `build_audio_output` is currently called with a separate audio_output variable on the stack & wherever `audio_output` is passed to other functions `dce110_apply_single_controller_ctx_to_hw()` & `dce110_setup_audio_dto()` (like `az_configure`, `wall_dto_setup`) replace with usage of `pipe_ctx->stream_res.audio_output` to centralize audio data per pipe. v4: Remove empty lines before `build_audio_output`. (Alex) Fixes: 9c6669c2e21a ("drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPO") Cc: Wayne Lin <wayne.lin@amd.com> Cc: George Shen <george.shen@amd.com> Cc: Michael Strauss <michael.strauss@amd.com> Cc: Alvin Lee <Alvin.Lee2@amd.com> Cc: Ray Wu <ray.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-23drm/amd/display: remove output_tf_change flagMelissa Wen3-9/+4
Remove this flag as the driver stopped managing it individually since commit a4056c2a6344 ("drm/amd/display: use HW hdr mult for brightness boost"). After some back and forth it was reintroduced as a condition to `set_output_transfer_func()` in [1]. Without direct management, this flag only changes value when all surface update flags are set true on UPDATE_TYPE_FULL with no output TF status meaning. Fixes: bb622e0c0044 ("drm/amd/display: program output tf when required") [1] Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 752e6f283ec59ae007aa15a93d5a4b2eefa8cec9)
2025-09-23drm/amd/display: Init DCN35 clocks from pre-os HW valuesLeo Li1-2/+119
[Why] We did not initialize dc clocks with boot-time hw values during init. This lead to incorrect clock values in dc, causing `dcn35_update_clocks` to make incorrect updates. [How] Correctly initialize DC with pre-os clk values from HW. s/dump/save/ as that accurately reflects the purpose of the functions. Fixes: 8774029f76b9 ("drm/amd/display: Add DCN35 CLK_MGR") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d43cc4ea1f9d720ab4bf06806f79260bfe981508)
2025-09-23drm/amd/display: Use mpc.preblend flag to indicate preblendAlvin Lee2-2/+2
[Description] Modifications in per asic capability means mpc.preblend flag should be used to indicate preblend. Update relevant paths to use this flag. Fixes: 39923050615c ("drm/amd/display: Clear DPP 3DLUT Cap") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9e5d4a5e27c6dc4e1b4fc9d654d13de12b8ce156) Cc: stable@vger.kernel.org
2025-09-23drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resumeMatthew Schwartz2-4/+15
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support, brightness sliders can include a hardware controlled portion and a gamma-based portion. This is the case on the Steam Deck OLED when using gamescope with Steam as a client. When a user sets a brightness level while HDR is active, the gamma-based portion and/or hardware portion are adjusted to achieve the desired brightness. However, when a modeset takes place while the gamma-based portion is in-use, restoring the hardware brightness level overrides the user's overall brightness level and results in a mismatch between what the slider reports and the display's current brightness. To avoid overriding gamma-based brightness, only restore HW backlight level after boot or resume. This ensures that the backlight level is set correctly after the DC layer resets it while avoiding interference with subsequent modesets. Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551 Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a490c8d77d500b5981e739be3d59c60cfe382536) Cc: stable@vger.kernel.org
2025-09-15drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/putIvan Lipski1-1/+38
[Why&How] As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936, SMU hang can occur if the interrupts are not enabled appropriately, causing a vblank timeout. This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the issue was observed. This will re-enable interrupts regardless of whether the user space needed it or not. Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 95d168b367aa28a59f94fc690ff76ebf69312c6d) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: use udelay rather than fsleepAlex Deucher1-1/+1
This function can be called from an atomic context so we can't use fsleep(). Fixes: 01f60348d8fb ("drm/amd/display: Fix 'failed to blank crtc!'") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4549 Cc: Wen Chen <Wen.Chen3@amd.com> Cc: Fangzhi Zuo <jerry.zuo@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 27e4dc2c0543fd1808cc52bd888ee1e0533c4a2e)
2025-09-09drm/amd/display: remove oem i2c adapter on finishGeoffrey McRae1-1/+12
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter registered resulting in a null pointer dereference when applications try to access the invalid device. Fixes: 3d5470c97314 ("drm/amd/display/dm: add support for OEM i2c bus") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Drop dm_prepare_suspend() and dm_complete()Mario Limonciello (AMD)1-21/+0
[Why] dm_prepare_suspend() was added in commit 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") to allow display to turn off earlier in the suspend sequence. This caused a regression that HDMI audio sometimes didn't work properly after resume unless audio was playing during suspend. [How] Drop dm_prepare_suspend() callback. All code in it will still run during dm_suspend(). Also drop unnecessary dm_complete() callback. dm_complete() was used for failed prepare and also for any case of successful resume. The code in it already runs in dm_resume(). This change will introduce more time that the display is turned on during suspend sequence. The compositor can turn it off sooner if desired. Cc: Harry Wentland <harry.wentland@amd.com> Reported-by: Przemysław Kopa <prz.kopa@gmail.com> Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f Reported-by: Kalvin <hikaph+oss@gmail.com> Closes: https://github.com/alsa-project/alsa-lib/issues/465 Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809 Fixes: 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2fd653b9bb5aacec5d4c421ab290905898fe85a2) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Correct sequences and delays for DCN35 PG & RCGOvidiu Bunea7-164/+111
[why] The current PG & RCG programming in driver has some gaps and incorrect sequences. [how] Added delays after ungating clocks to allow ramp up, increased polling to allow more time for power up, and removed the incorrect sequences. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1bde5584e297921f45911ae874b0175dce5ed4b5) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Disable DPCD Probe QuirkFangzhi Zuo1-0/+1
Disable dpcd probe quirk to native aux. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4500 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250904191351.746707-1-Jerry.Zuo@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c5f4fb40584ee591da9fa090c6f265d11cbb1acf) Cc: stable@vger.kernel.org # 6.16.y: 5281cbe0b55a Cc: stable@vger.kernel.org # 6.16.y: 0b4aa85e8981 Cc: stable@vger.kernel.org # 6.16.y: b87ed522b364 Cc: stable@vger.kernel.org # 6.16.y
2025-08-29drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PGIvan Lipski7-0/+90
[Why&How] ON DCN314, clearing DPP SW structure without power gating it can cause a double cursor in full screen with non-native scaling. A W/A that clears CURSOR0_CONTROL cursor_enable flag if dcn10_plane_atomic_power_down is called and DPP power gating is disabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4168 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 645f74f1dc119dad5a2c7bbc05cc315e76883011) Cc: stable@vger.kernel.org
2025-08-29drm/amd: Re-enable common modes for eDP and LVDSMario Limonciello1-2/+1
[Why] Although compositors will add their own modes, Xorg won't use it's own modes and will only stick to modes advertised by the driver. This mean a user that used to pick 1024x768 could no longer access it unless the panel's native resolution was 1024x768. [How] Revert commit 6d396e7ac1ce3 ("drm/amd/display: Disable common modes for LVDS") and commit 7948afb46af92 ("drm/amd/display: Disable common modes for eDP"). The panel will still use scaling for any non-native modes due to commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250828140856.2887993-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c2fbf72fe3c2d08856e834ca43328a8829a261d8)
2025-08-18drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.Timur Kristóf1-15/+6
On DCE 6, DP audio was not working. However, it worked when an HDMI monitor was also plugged in. Looking at dce_aud_wall_dto_setup it seems that the main difference is that we use DTO1 when only DP is plugged in. When programming DTO1, it uses audio_dto_source_clock_in_khz which is set from get_dp_ref_freq_khz The dce60_get_dp_ref_freq_khz implementation looks incorrect, because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6, so it isn't usable. I compared dce60_get_dp_ref_freq_khz to the legacy display code, specifically dce_v6_0_audio_set_dto, and it turns out that in case of DCE 6, it needs to use the display clock. With that, DP audio started working on Pitcairn, Oland and Cape Verde. However, it still didn't work on Tahiti. Despite having the same DCE version, Tahiti seems to have a different audio device. After some trial and error I realized that it works with the default display clock as reported by the VBIOS, not the current display clock. The patch was tested on all four SI GPUs: * Pitcairn (DCE 6.0) * Oland (DCE 6.4) * Cape Verde (DCE 6.0) * Tahiti (DCE 6.0 but different) The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on each of the above GPUs, at the following settings: * 4K 60 Hz * 1080p 60 Hz * 1080p 144 Hz Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3Timur Kristóf1-1/+1
For later VBIOS versions, the fractional feedback divider is calculated as the remainder of dividing the feedback divider by a factor, which is set to 1000000. For reference, see: - calculate_fb_and_fractional_fb_divider - calc_pll_max_vco_construct However, in case of old VBIOS versions that have set_pixel_clock_v3, they only have 1 byte available for the fractional feedback divider, and it's expected to be set to the remainder from dividing the feedback divider by 10. For reference see the legacy display code: - amdgpu_pll_compute - amdgpu_atombios_crtc_program_pll This commit fixes set_pixel_clock_v3 by dividing the fractional feedback divider passed to the function by 100000. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Don't print errors for nonexistent connectorsTimur Kristóf2-5/+15
When getting the number of connectors, the VBIOS reports the number of valid indices, but it doesn't say which indices are valid, and not every valid index has an actual connector. If we don't find a connector on an index, that is not an error. Considering these are not actual errors, don't litter the logs. Fixes: 60df5628144b ("drm/amd/display: handle invalid connector indices") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 249d4bc5f1935f04bb45b3b63c0f8922565124f7)
2025-08-18drm/amd/display: Don't warn when missing DCE encoder capsTimur Kristóf1-4/+4
On some GPUs the VBIOS just doesn't have encoder caps, or maybe not for every encoder. This isn't really a problem and it's handled well, so let's not litter the logs with it. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
2025-08-18drm/amd/display: Fill display clock and vblank time in dce110_fill_display_configsTimur Kristóf3-11/+3
Also needed by DCE 6. This way the code that gathers this info can be shared between different DCE versions and doesn't have to be repeated. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configsTimur Kristóf1-10/+20
dce110_fill_display_configs is shared between DCE 6-11, and finding the first CRTC and its line time is relevant to DCE 6 too. Move the code to find it from DCE 11 specific code. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%Timur Kristóf1-7/+5
Adjust the nominal (and performance) clocks for DCE 8-10, and set them to 625 MHz, which is the value used by the legacy display code in amdgpu_atombios_get_clock_info. This was tested with Hawaii, Tonga and Fiji. These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz. The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 8-10 which are already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 8-10 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1ae45b5d4f371af8ae51a3827d0ec9fe27eeb867)
2025-08-18drm/amd/display: Don't overclock DCE 6 by 15%Timur Kristóf1-5/+3
The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 6 which is already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 6 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()Chenyuan Yang1-0/+3
The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
2025-08-18drm/amd/display: Fix Xorg desktop unresponsive on Replay panelTom Chung1-0/+19
[WHY & HOW] IPS & self-fresh feature can cause vblank counter resets between vblank disable and enable. It may cause system stuck due to wait the vblank counter. Call the drm_crtc_vblank_restore() during vblank enable to estimate missed vblanks by using timestamps and update the vblank counter in DRM. It can make the vblank counter increase smoothly and resolve this issue. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 34d66bc7ff10e146a4cec76cf286979740a10954) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Avoid a NULL pointer dereferenceMario Limonciello1-0/+3
[WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Revert Add HPO encoder support to ReplayGabe Teeger4-62/+5
This reverts commits: commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay") commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)") due to visual confirm issue. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
2025-08-08Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds6-28/+48
Pull drm fixes from Dave Airlie: "This is the fixes that built up in the merge window, mostly amdgpu and xe with one i915 display fix, seems like things are pretty good for rc1. i915: - DP LPFS fixes xe: - SRIOV: PF fixes and removal of need of module param - Fix driver unbind around Devcoredump - Mark xe driver as BROKEN if kernel page size is not 4kB amdgpu: - GC 9.5.0 fixes - SMU fix - DCE 6 DC fixes - mmhub client ID fixes - VRR fix - Backlight fix - UserQ fix - Legacy reset fix - Misc fixes amdkfd: - CRIU fix - Debugfs fix" * tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits) drm/amdgpu: add missing vram lost check for LEGACY RESET drm/amdgpu/discovery: fix fw based ip discovery drm/amdkfd: Destroy KFD debugfs after destroy KFD wq amdgpu/amdgpu_discovery: increase timeout limit for IFWI init drm/amdgpu: Update SDMA firmware version check for user queue support drm/amdgpu: Add NULL check for asic_funcs drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value" drm/amd/display: fix a Null pointer dereference vulnerability drm/amd/display: Add primary plane to commits for correct VRR handling drm/amdgpu: update mmhub 3.3 client id mappings drm/amdgpu: update mmhub 3.0.1 client id mappings drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming. drm/amd/display: Don't overwrite dce60_clk_mgr drm/amdkfd: Fix checkpoint-restore on multi-xcc drm/amd: Restore cached manual clock settings during resume drm/amd: Restore cached power limit during resume drm/amdgpu: Update external revid for GC v9.5.0 drm/amdgpu: Update supported modes for GC v9.5.0 Mark xe driver as BROKEN if kernel page size is not 4kB ...
2025-08-04drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"Mario Limonciello1-4/+4
This reverts commit 66abb996999de0d440a02583a6e70c2c24deab45. This broke custom brightness curves but it wasn't obvious because of other related changes. Custom brightness curves are always from a 0-255 input signal. The correct fix was to fix the default value which was done by [1]. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4412 Link: https://lore.kernel.org/amd-gfx/0f094c4b-d2a3-42cd-824c-dc2858a5618d@kernel.org/T/#m69f875a7e69aa22df3370b3e3a9e69f4a61fdaf2 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6ec8a5cbec751625133461600d0d4950ffd3a214) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: fix a Null pointer dereference vulnerabilitySiyang Liu1-9/+10
[Why] A null pointer dereference vulnerability exists in the AMD display driver's (DC module) cleanup function dc_destruct(). When display control context (dc->ctx) construction fails (due to memory allocation failure), this pointer remains NULL. During subsequent error handling when dc_destruct() is called, there's no NULL check before dereferencing the perf_trace member (dc->ctx->perf_trace), causing a kernel null pointer dereference crash. [How] Check if dc->ctx is non-NULL before dereferencing. Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> (Updated commit text and removed unnecessary error message) Signed-off-by: Siyang Liu <Security@tencent.com> Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Add primary plane to commits for correct VRR handlingMichel Dänzer1-0/+9
amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for the primary plane. If a commit affects a CRTC but not its primary plane, it would previously not trigger a refresh cycle or affect LFC, violating current UAPI semantics. Fixes e.g. atomic commits affecting only the cursor plane being limited to the minimum refresh rate. Don't do this for the legacy cursor ioctls though, it would break the UAPI semantics for those. Suggested-by: Xaver Hugl <xaver.hugl@kde.org> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cc7bfba95966251b254cb970c21627124da3b7f4) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.Timur Kristóf2-14/+25
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only be used for DP. Make sure to initialize the correct amount of PLLs in DC for these DCE versions and use PLL0 only for DP. Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at initialization as opposed to DCE 6.1 and 7.x which use a different clock source for DFS. The following functions were used as reference from the old radeon driver implementation of DCE 6.x: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 35222b5934ec8d762473592ece98659baf6bc48e) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Don't overwrite dce60_clk_mgrTimur Kristóf1-1/+0
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr with the dce_clk_mgr, causing incorrect behaviour on DCE6. Fix it by removing the extra dce_clk_mgr_construct. Fixes: 62eab49faae7 ("drm/amd/display: hide VGH asic specific structs") Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bbddcbe36a686af03e91341b9bbfcca94bd45fb6) Cc: stable@vger.kernel.org
2025-07-31Merge tag 'drm-next-2025-08-01' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds7-23/+37
Pull drm fixes from Dave Airlie: "Just a bunch of amdgpu and xe fixes. amdgpu: - DSC divide by 0 fix - clang fix - DC debugfs fix - Userq fixes - Avoid extra evict-restore with KFD - Backlight fix - Documentation fix - RAS fix - Add new kicker handling - DSC fix for DCN 3.1.4 - PSR fix - Atomic fix - DC reset fixes - DCN 3.0.1 fix - MMHUB client mapping fix xe: - Fix BMG probe on unsupported mailbox command - Fix OA static checker warning about null gt - Fix a NULL vs IS_ERR() bug in xe_i2c_register_adapter - Fix missing unwind goto in GuC/HuC - Don't register I2C devices if VF - Clear whole GuC g2h_fence during initialization - Avoid call kfree for drmm_kzalloc - Fix pci_dev reference leak on configfs - SRIOV: Disable CSC support on VF * tag 'drm-next-2025-08-01' of https://gitlab.freedesktop.org/drm/kernel: (24 commits) drm/xe/vf: Disable CSC support on VF drm/amdgpu: update mmhub 4.1.0 client id mappings drm/amd/display: Allow DCN301 to clear update flags drm/amd/display: Pass up errors for reset GPU that fails to init HW drm/amd/display: Only finalize atomic_obj if it was initialized drm/amd/display: Avoid configuring PSR granularity if PSR-SU not supported drm/amd/display: Disable dsc_power_gate for dcn314 by default drm/amdgpu: add kicker fws loading for gfx12/smu14/psp14 drm/amd/amdgpu: fix missing lock for cper.ring->rptr/wptr access drm/amd/display: Fix misuse of /** to /* in 'dce_i2c_hw.c' drm/amd/display: fix initial backlight brightness calculation drm/amdgpu: Avoid extra evict-restore process. drm/amdgpu: track whether a queue is a kernel queue in amdgpu_mqd_prop drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities drm/amdgpu: Initialize data to NULL in imu_v12_0_program_rlc_ram() drm/amd/display: Fix divide by zero when calculating min ODM factor drm/xe/configfs: Fix pci_dev reference leak drm/xe/hw_engine_group: Avoid call kfree() for drmm_kzalloc() drm/xe/guc: Clear whole g2h_fence during initialization drm/xe/vf: Don't register I2C devices if VF ...
2025-07-30Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds165-2043/+3604
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
2025-07-29Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-coreLinus Torvalds1-2/+2
Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
2025-07-28drm/amd/display: Allow DCN301 to clear update flagsIvan Lipski1-1/+2
[Why & How] Not letting DCN301 to clear after surface/stream update results in artifacts when switching between active overlay planes. The issue is known and has been solved initially. See below: (https://gitlab.freedesktop.org/drm/amd/-/issues/3441) Fixes: f354556e29f4 ("drm/amd/display: limit clear_update_flags t dcn32 and above") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-28drm/amd/display: Pass up errors for reset GPU that fails to init HWMario Limonciello1-1/+3
[Why] If a GPU is in reset and the hardware fails to initialize the rest of the resume sequence shouldn't be run. [How] Pass error code up to caller of dm_resume(). Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-07-28drm/amd/display: Only finalize atomic_obj if it was initializedMario Limonciello1-1/+2
[Why] If amdgpu_dm failed to initalize before amdgpu_dm_initialize_drm_device() completed then freeing atomic_obj will lead to list corruption. [How] Check if atomic_obj state is initialized before trying to free. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-28drm/amd/display: Avoid configuring PSR granularity if PSR-SU not supportedMario Limonciello1-2/+4
[Why] If PSR-SU is disabled on the link, then configuring su_y granularity in mod_power_calc_psr_configs() can lead to assertions in psr_su_set_dsc_slice_height(). [How] Check the PSR version in amdgpu_dm_link_setup_psr() to determine whether or not to configure granularity. Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-28drm/amd/display: Disable dsc_power_gate for dcn314 by defaultRoman Li1-0/+1
[Why] "REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line" warnings seen after resuming from s2idle. DCN314 has issues with DSC power gating that cause REG_WAIT timeouts when attempting to power down DSC blocks. [How] Disable dsc_power_gate for dcn314 by default. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-28drm/amd/display: Fix misuse of /** to /* in 'dce_i2c_hw.c'Srinivasan Shanmugam1-1/+7
Fix the comment style before cntl_stuck_hw_workaround() by replacing '/**' with '/*' since it is not a kdoc comment. Fixes the below with gcc W=1: display/dc/dce/dce_i2c_hw.c:380: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * If we boot without an HDMI display, the I2C engine does not get initialized Fixes: 04d57f4462a6 ("drm/amd/display: Workaround for stuck I2C arbitrage") Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Dominik Kaszewski <dominik.kaszewski@amd.com> Cc: Ivan Lipski <ivan.lipski@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.