Merge tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Luinus Walleij:
 "Bulk GPIO changes for the v4.10 kernel cycle:

  Core changes:

   - Simplify threaded interrupt handling: instead of passing numbed
     parameters to gpiochip_irqchip_add_chained() we create a new call:
     gpiochip_irqchip_add_nested() so the two types are clearly
     semantically different. Also make sure that all nested chips call
     gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
     work properly if it happens.

   - Return error on seek operations for the chardev.

   - Clamp values set as part of gpio[d]_direction_output() so that
     anything != 0 will be send down to the driver as "1" not the value
     passed in.

   - ACPI can now support naming of GPIO lines, hogs and holes in the
     GPIO lists.

  New drivers:

   - The SX150x driver was deemed unfit for the GPIO subsystem and was
     moved over to a combined GPIO+pinctrl driver in the pinctrl
     subsystem.

  New features:

   - Various cleanups to various drivers"

* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
  gpio: merrifield: Implement gpio_get_direction callback
  gpio: merrifield: Add support for hardware debouncer
  gpio: chardev: Return error for seek operations
  gpio: arizona: Tidy up probe error path
  gpio: arizona: Remove pointless set of platform drvdata
  gpio: pl061: delete platform data handling
  gpio: pl061: move platform data into driver
  gpio: pl061: rename variable from chip to pl061
  gpio: pl061: rename state container struct
  gpio: pl061: use local state for parent IRQ storage
  gpio: set explicit nesting on drivers
  gpio: simplify adding threaded interrupts
  gpio: vf610: use builtin_platform_driver
  gpio: axp209: use correct register for GPIO input status
  gpio: stmpe: fix interrupt handling bug
  gpio: em: depnd on ARCH_SHMOBILE
  gpio: zx: depend on ARCH_ZX
  gpio: x86: update config dependencies for x86 specific hardware
  gpio: mb86s7x: use builtin_platform_driver
  gpio: etraxfs: use builtin_platform_driver
  ...

44 files changed, 2228 insertions, 1295 deletions

diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
index 5aafe0b351a1..2aff0349facd 100644
--- a/Documentation/acpi/gpio-properties.txt
+++ b/Documentation/acpi/gpio-properties.txt
@@ -51,6 +51,68 @@ it to 1 marks the GPIO as active low.
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+It is possible to leave holes in the array of GPIOs. This is useful in
+cases like with SPI host controllers where some chip selects may be
+implemented as GPIOs and some as native signals. For example a SPI host
+controller can have chip selects 0 and 2 implemented as GPIOs and 1 as
+native:
+
+  Package () {
+      "cs-gpios",
+      Package () {
+          ^GPIO, 19, 0, 0, // chip select 0: GPIO
+          0,               // chip select 1: native signal
+          ^GPIO, 20, 0, 0, // chip select 2: GPIO
+      }
+  }
+
+Other supported properties
+--------------------------
+
+Following Device Tree compatible device properties are also supported by
+_DSD device properties for GPIO controllers:
+
+- gpio-hog
+- output-high
+- output-low
+- input
+- line-name
+
+Example:
+
+  Name (_DSD, Package () {
+      // _DSD Hierarchical Properties Extension UUID
+      ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+      Package () {
+          Package () {"hog-gpio8", "G8PU"}
+      }
+  })
+
+  Name (G8PU, Package () {
+      ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+      Package () {
+          Package () {"gpio-hog", 1},
+          Package () {"gpios", Package () {8, 0}},
+          Package () {"output-high", 1},
+          Package () {"line-name", "gpio8-pullup"},
+      }
+  })
+
+- gpio-line-names
+
+Example:
+
+  Package () {
+      "gpio-line-names",
+      Package () {
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
+          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+      }
+  }
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for more information
+about these properties.
+
 ACPI GPIO Mappings Provided by Drivers
 --------------------------------------
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
deleted file mode 100644
index c809acb9c71b..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-SEMTECH SX150x GPIO expander bindings
-
-
-Required properties:
-
-- compatible: should be "semtech,sx1506q",
-			"semtech,sx1508q",
-			"semtech,sx1509q",
-			"semtech,sx1502q".
-
-- reg: The I2C slave address for this device.
-
-- interrupt-parent: phandle of the parent interrupt controller.
-
-- interrupts: Interrupt specifier for the controllers interrupt.
-
-- #gpio-cells: Should be 2. The first cell is the GPIO number and the
-		second cell is used to specify optional parameters:
-		bit 0: polarity (0: normal, 1: inverted)
-
-- gpio-controller: Marks the device as a GPIO controller.
-
-- interrupt-controller: Marks the device as a interrupt controller.
-
-The GPIO expander can optionally be used as an interrupt controller, in
-which case it uses the default two cell specifier as described in
-Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-Example:
-
-	i2c_gpio_expander@20{
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "semtech,sx1506q";
-		reg = <0x20>;
-		interrupt-parent = <&gpio_1>;
-		interrupts = <16 0>;
-
-		gpio-controller;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
new file mode 100644
index 000000000000..c293c8aaac73
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
@@ -0,0 +1,69 @@
+SEMTECH SX150x GPIO expander bindings
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+Required properties:
+- compatible: should be one of :
+			"semtech,sx1506q",
+			"semtech,sx1508q",
+			"semtech,sx1509q",
+			"semtech,sx1502q".
+
+- reg: The I2C slave address for this device.
+
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+		second cell is used to specify optional parameters:
+		bit 0: polarity (0: normal, 1: inverted)
+
+- gpio-controller: Marks the device as a GPIO controller.
+
+Optional properties :
+- interrupt-parent: phandle of the parent interrupt controller.
+
+- interrupts: Interrupt specifier for the controllers interrupt.
+
+- interrupt-controller: Marks the device as a interrupt controller.
+
+- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe,
+		only for sx1508q and sx1509q
+
+The GPIO expander can optionally be used as an interrupt controller, in
+which case it uses the default two cell specifier.
+
+Required properties for pin configuration sub-nodes:
+ - pins: List of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - bias-disable: disable any pin bias, except the OSCIO pin
+ - bias-pull-up: pull up the pin, except the OSCIO pin
+ - bias-pull-down: pull down the pin, except the OSCIO pin
+ - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin
+ - drive-push-pull: drive actively high and low
+ - drive-open-drain: drive with open drain only for sx1508q and sx1509q and except the OSCIO pin
+ - output-low: set the pin to output mode with low level
+ - output-high: set the pin to output mode with high level
+
+Example:
+
+	i2c0gpio-expander@20{
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		compatible = "semtech,sx1506q";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_1>;
+		interrupts = <16 0>;
+
+		gpio-controller;
+		interrupt-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio1_cfg_pins>;
+
+		gpio1_cfg_pins: gpio1-cfg {
+			pins = "gpio1";
+			bias-pull-up;
+		};
+	};
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt
index 368d5a294d89..747c721776ed 100644
--- a/Documentation/gpio/driver.txt
+++ b/Documentation/gpio/driver.txt
@@ -175,8 +175,8 @@ The IRQ portions of the GPIO block are implemented using an irqchip, using
 the header <linux/irq.h>. So basically such a driver is utilizing two sub-
 systems simultaneously: gpio and irq.
 
-RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs
-(like PM runtime) as part of its irq_chip implementation on -RT.
+RT_FULL: a realtime compliant GPIO driver should not use spinlock_t or any
+sleepable APIs (like PM runtime) as part of its irq_chip implementation.
 - spinlock_t should be replaced with raw_spinlock_t [1].
 - If sleepable APIs have to be used, these can be done from the .irq_bus_lock()
   and .irq_bus_unlock() callbacks, as these are the only slowpath callbacks
@@ -185,33 +185,32 @@ RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs
 GPIO irqchips usually fall in one of two categories:
 
 * CHAINED GPIO irqchips: these are usually the type that is embedded on
-  an SoC. This means that there is a fast IRQ handler for the GPIOs that
+  an SoC. This means that there is a fast IRQ flow handler for the GPIOs that
   gets called in a chain from the parent IRQ handler, most typically the
-  system interrupt controller. This means the GPIO irqchip is registered
-  using irq_set_chained_handler() or the corresponding
-  gpiochip_set_chained_irqchip() helper function, and the GPIO irqchip
-  handler will be called immediately from the parent irqchip, while
-  holding the IRQs disabled. The GPIO irqchip will then end up calling
-  something like this sequence in its interrupt handler:
-
-  static irqreturn_t tc3589x_gpio_irq(int irq, void *data)
+  system interrupt controller. This means that the GPIO irqchip handler will
+  be called immediately from the parent irqchip, while holding the IRQs
+  disabled. The GPIO irqchip will then end up calling something like this
+  sequence in its interrupt handler:
+
+  static irqreturn_t foo_gpio_irq(int irq, void *data)
       chained_irq_enter(...);
       generic_handle_irq(...);
       chained_irq_exit(...);
 
   Chained GPIO irqchips typically can NOT set the .can_sleep flag on
-  struct gpio_chip, as everything happens directly in the callbacks.
+  struct gpio_chip, as everything happens directly in the callbacks: no
+  slow bus traffic like I2C can be used.
 
   RT_FULL: Note, chained IRQ handlers will not be forced threaded on -RT.
   As result, spinlock_t or any sleepable APIs (like PM runtime) can't be used
   in chained IRQ handler.
-  if required (and if it can't be converted to the nested threaded GPIO irqchip)
-  - chained IRQ handler can be converted to generic irq handler and this way
-  it will be threaded IRQ handler on -RT and hard IRQ handler on non-RT
+  If required (and if it can't be converted to the nested threaded GPIO irqchip)
+  a chained IRQ handler can be converted to generic irq handler and this way
+  it will be a threaded IRQ handler on -RT and a hard IRQ handler on non-RT
   (for example, see [3]).
   Know W/A: The generic_handle_irq() is expected to be called with IRQ disabled,
-  so IRQ core will complain if it will be called from IRQ handler which is
-  forced thread. The "fake?" raw lock can be used to W/A this problem:
+  so the IRQ core will complain if it is called from an IRQ handler which is
+  forced to a thread. The "fake?" raw lock can be used to W/A this problem:
 
 	raw_spinlock_t wa_lock;
 	static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
@@ -243,7 +242,7 @@ GPIO irqchips usually fall in one of two categories:
   by the driver. The hallmark of this driver is to call something like
   this in its interrupt handler:
 
-  static irqreturn_t tc3589x_gpio_irq(int irq, void *data)
+  static irqreturn_t foo_gpio_irq(int irq, void *data)
       ...
       handle_nested_irq(irq);
 
@@ -256,23 +255,31 @@ associated irqdomain and resource allocation callbacks, the gpiolib has
 some helpers that can be enabled by selecting the GPIOLIB_IRQCHIP Kconfig
 symbol:
 
-* gpiochip_irqchip_add(): adds an irqchip to a gpiochip. It will pass
+* gpiochip_irqchip_add(): adds a chained irqchip to a gpiochip. It will pass
   the struct gpio_chip* for the chip to all IRQ callbacks, so the callbacks
   need to embed the gpio_chip in its state container and obtain a pointer
   to the container using container_of().
   (See Documentation/driver-model/design-patterns.txt)
 
-  If there is a need to exclude certain GPIOs from the IRQ domain, one can
-  set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is
-  called. This allocates .irq_valid_mask with as many bits set as there are
-  GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this
-  mask. The mask must be filled in before gpiochip_irqchip_add() is called.
+* gpiochip_irqchip_add_nested(): adds a nested irqchip to a gpiochip.
+  Apart from that it works exactly like the chained irqchip.
 
 * gpiochip_set_chained_irqchip(): sets up a chained irq handler for a
   gpio_chip from a parent IRQ and passes the struct gpio_chip* as handler
   data. (Notice handler data, since the irqchip data is likely used by the
-  parent irqchip!) This is for the chained type of chip. This is also used
-  to set up a nested irqchip if NULL is passed as handler.
+  parent irqchip!).
+
+* gpiochip_set_nested_irqchip(): sets up a nested irq handler for a
+  gpio_chip from a parent IRQ. As the parent IRQ has usually been
+  explicitly requested by the driver, this does very little more than
+  mark all the child IRQs as having the other IRQ as parent.
+
+If there is a need to exclude certain GPIOs from the IRQ domain, you can
+set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is
+called. This allocates an .irq_valid_mask with as many bits set as there
+are GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this
+mask. The mask must be filled in before gpiochip_irqchip_add() or
+gpiochip_irqchip_add_nested() is called.
 
 To use the helpers please keep the following in mind:
 
@@ -323,6 +330,9 @@ When implementing an irqchip inside a GPIO driver, these two functions should
 typically be called in the .startup() and .shutdown() callbacks from the
 irqchip.
 
+When using the gpiolib irqchip helpers, these callback are automatically
+assigned.
+
 Real-Time compliance for GPIO IRQ chips
 ---------------------------------------
 
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index ed9a01484030..a109f6482413 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,7 +21,6 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
-#include <linux/amba/pl061.h>
 #include <linux/io.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ed37e5908b91..d5d36549ecc1 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -167,7 +167,7 @@ config GPIO_DWAPB
 
 config GPIO_EM
 	tristate "Emma Mobile GPIO"
-	depends on ARM && OF_GPIO
+	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
@@ -451,7 +451,7 @@ config GPIO_VR41XX
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -520,6 +520,7 @@ config GPIO_ZYNQ
 
 config GPIO_ZX
 	bool "ZTE ZX GPIO support"
+	depends on ARCH_ZX || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support the GPIO device on ZTE ZX SoCs.
@@ -603,7 +604,7 @@ config GPIO_IT87
 
 config GPIO_SCH
 	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
-	depends on PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select MFD_CORE
 	select LPC_SCH
 	help
@@ -777,16 +778,13 @@ config GPIO_PCF857X
 	  platform-neutral GPIO calls.
 
 config GPIO_SX150X
-	bool "Semtech SX150x I2C GPIO expander"
-	depends on I2C=y
-	select GPIOLIB_IRQCHIP
+	bool "Semtech SX150x I2C GPIO expander (deprecated)"
+	depends on PINCTRL && I2C=y
+	select PINCTRL_SX150X
 	default n
 	help
-	  Say yes here to provide support for Semtech SX150-series I2C
-	  GPIO expanders. Compatible models include:
-
-	  8 bits:  sx1508q
-	  16 bits: sx1509q
+	  Say yes here to provide support for Semtech SX150x-series I2C
+	  GPIO expanders. The GPIO driver was replaced by a Pinctrl version.
 
 config GPIO_TPIC2810
 	tristate "TPIC2810 8-Bit I2C GPO expander"
@@ -798,6 +796,7 @@ config GPIO_TPIC2810
 
 config GPIO_TS4900
 	tristate "Technologic Systems FPGA I2C GPIO"
+	depends on SOC_IMX6 || COMPILE_TEST
 	select REGMAP_I2C
 	help
 	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
@@ -814,6 +813,14 @@ config GPIO_ADP5520
 	  This option enables support for on-chip GPIO found
 	  on Analog Devices ADP5520 PMICs.
 
+config GPIO_ALTERA_A10SR
+	tristate "Altera Arria10 System Resource GPIO"
+	depends on MFD_ALTERA_A10SR
+	help
+	  Driver for Arria10 Development Kit GPIO expansion which
+	  includes reads of pushbuttons and DIP switches as well
+	  as writes to LEDs.
+
 config GPIO_ARIZONA
 	tristate "Wolfson Microelectronics Arizona class devices"
 	depends on MFD_ARIZONA
@@ -822,7 +829,7 @@ config GPIO_ARIZONA
 
 config GPIO_CRYSTAL_COVE
 	tristate "GPIO support for Crystal Cove PMIC"
-	depends on INTEL_SOC_PMIC
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
 	select GPIOLIB_IRQCHIP
 	help
 	  Support for GPIO pins on Crystal Cove PMIC.
@@ -835,6 +842,7 @@ config GPIO_CRYSTAL_COVE
 
 config GPIO_CS5535
 	tristate "AMD CS5535/CS5536 GPIO support"
+	depends on X86 || MIPS || COMPILE_TEST
 	depends on MFD_CS5535
 	help
 	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
@@ -927,7 +935,7 @@ config GPIO_MAX77620
 
 config GPIO_MSIC
 	bool "Intel MSIC mixed signal gpio support"
-	depends on MFD_INTEL_MSIC
+	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
 	help
 	  Enable support for GPIO on intel MSIC controllers found in
 	  intel MID devices
@@ -1028,7 +1036,7 @@ config GPIO_UCB1400
 
 config GPIO_WHISKEY_COVE
 	tristate "GPIO support for Whiskey Cove PMIC"
-	depends on INTEL_SOC_PMIC
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
 	select GPIOLIB_IRQCHIP
 	help
 	  Support for GPIO pins on Whiskey Cove PMIC.
@@ -1067,6 +1075,7 @@ menu "PCI GPIO expanders"
 
 config GPIO_AMD8111
 	tristate "AMD 8111 GPIO driver"
+	depends on X86 || COMPILE_TEST
 	help
 	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
 
@@ -1108,6 +1117,7 @@ config GPIO_MERRIFIELD
 
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+	depends on X86 || COMPILE_TEST
 	select GENERIC_IRQ_CHIP
 	help
 	  ML7213 is companion chip for Intel Atom E6xx series.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d074c2299393..a7676b82de6f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 obj-$(CONFIG_GPIOLIB)		+= devres.o
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 obj-$(CONFIG_GPIOLIB)		+= gpiolib-legacy.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib-devprop.o
 obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
 obj-$(CONFIG_GPIO_SYSFS)	+= gpiolib-sysfs.o
 obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
@@ -24,6 +25,7 @@ obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
 obj-$(CONFIG_GPIO_ALTERA)  	+= gpio-altera.o
+obj-$(CONFIG_GPIO_ALTERA_A10SR)	+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_AMDPT)	+= gpio-amdpt.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
@@ -102,7 +104,6 @@ obj-$(CONFIG_GPIO_SPEAR_SPICS)	+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o
-obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_SYSCON)	+= gpio-syscon.o
 obj-$(CONFIG_GPIO_TB10X)	+= gpio-tb10x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index 8ff7b0d3eac6..89863ea25de1 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -468,17 +468,19 @@ static int adnp_irq_setup(struct adnp *adnp)
 		return err;
 	}
 
-	err = gpiochip_irqchip_add(chip,
-				   &adnp_irq_chip,
-				   0,
-				   handle_simple_irq,
-				   IRQ_TYPE_NONE);
+	err = gpiochip_irqchip_add_nested(chip,
+					  &adnp_irq_chip,
+					  0,
+					  handle_simple_irq,
+					  IRQ_TYPE_NONE);
 	if (err) {
 		dev_err(chip->parent,
 			"could not connect irqchip to gpiochip\n");
 		return err;
 	}
 
+	gpiochip_set_nested_irqchip(chip, &adnp_irq_chip, adnp->client->irq);
+
 	return 0;
 }
 
diff --git a/drivers/gpio/gpio-altera-a10sr.c b/drivers/gpio/gpio-altera-a10sr.c
new file mode 100644
index 000000000000..9e1a138fed53
--- /dev/null
+++ b/drivers/gpio/gpio-altera-a10sr.c
@@ -0,0 +1,130 @@
+/*
+ *  Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * GPIO driver for  Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from gpio-tps65910.c
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+
+/**
+ * struct altr_a10sr_gpio - Altera Max5 GPIO device private data structure
+ * @gp:   : instance of the gpio_chip
+ * @regmap: the regmap from the parent device.
+ */
+struct altr_a10sr_gpio {
+	struct gpio_chip gp;
+	struct regmap *regmap;
+};
+
+static int altr_a10sr_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->regmap, ALTR_A10SR_PBDSW_REG, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset - ALTR_A10SR_LED_VALID_SHIFT));
+}
+
+static void altr_a10sr_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				int value)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->regmap, ALTR_A10SR_LED_REG,
+			   BIT(ALTR_A10SR_LED_VALID_SHIFT + offset),
+			   value ? BIT(ALTR_A10SR_LED_VALID_SHIFT + offset)
+			   : 0);
+}
+
+static int altr_a10sr_gpio_direction_input(struct gpio_chip *gc,
+					   unsigned int nr)
+{
+	if (nr >= (ALTR_A10SR_IN_VALID_RANGE_LO - ALTR_A10SR_LED_VALID_SHIFT))
+		return 0;
+	return -EINVAL;
+}
+
+static int altr_a10sr_gpio_direction_output(struct gpio_chip *gc,
+					    unsigned int nr, int value)
+{
+	if (nr <= (ALTR_A10SR_OUT_VALID_RANGE_HI - ALTR_A10SR_LED_VALID_SHIFT))
+		return 0;
+	return -EINVAL;
+}
+
+static struct gpio_chip altr_a10sr_gc = {
+	.label = "altr_a10sr_gpio",
+	.owner = THIS_MODULE,
+	.get = altr_a10sr_gpio_get,
+	.set = altr_a10sr_gpio_set,
+	.direction_input = altr_a10sr_gpio_direction_input,
+	.direction_output = altr_a10sr_gpio_direction_output,
+	.can_sleep = true,
+	.ngpio = 12,
+	.base = -1,
+};
+
+static int altr_a10sr_gpio_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_gpio *gpio;
+	int ret;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->regmap = a10sr->regmap;
+
+	gpio->gp = altr_a10sr_gc;
+
+	gpio->gp.of_node = pdev->dev.of_node;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_gpio_of_match[] = {
+	{ .compatible = "altr,a10sr-gpio" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_gpio_of_match);
+
+static struct platform_driver altr_a10sr_gpio_driver = {
+	.probe = altr_a10sr_gpio_probe,
+	.driver = {
+		.name	= "altr_a10sr_gpio",
+		.of_match_table = of_match_ptr(altr_a10sr_gpio_of_match),
+	},
+};
+module_platform_driver(altr_a10sr_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@opensource.altera.com>");
+MODULE_DESCRIPTION("Altera Arria10 System Resource Chip GPIO");
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 482462889c8f..1f91557717a6 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -137,15 +137,10 @@ static int arizona_gpio_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
 			ret);
-		goto err;
+		return ret;
 	}
 
-	platform_set_drvdata(pdev, arizona_gpio);
-
-	return ret;
-
-err:
-	return ret;
+	return 0;
 }
 
 static struct platform_driver arizona_gpio_driver = {
diff --git a/drivers/gpio/gpio-axp209.c b/drivers/gpio/gpio-axp209.c
index d9c2a517c6df..4a346b7b4172 100644
--- a/drivers/gpio/gpio-axp209.c
+++ b/drivers/gpio/gpio-axp209.c
@@ -64,13 +64,9 @@ static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
 	unsigned int val;
-	int reg, ret;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
+	int ret;
 
-	ret = regmap_read(gpio->regmap, reg, &val);
+	ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 7c446d118cd6..2197368cc899 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -351,8 +351,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev)
 		return retval;
 	}
 
-	gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
-			     handle_simple_irq, IRQ_TYPE_NONE);
+	gpiochip_irqchip_add_nested(&cg->chip, &crystalcove_irqchip, 0,
+				    handle_simple_irq, IRQ_TYPE_NONE);
 
 	retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
 				      IRQF_ONESHOT, KBUILD_MODNAME, cg);
@@ -362,6 +362,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev)
 		return retval;
 	}
 
+	gpiochip_set_nested_irqchip(&cg->chip, &crystalcove_irqchip, irq);
+
 	return 0;
 }
 
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index dd262f00295d..9191056548fe 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -40,6 +40,7 @@ struct davinci_gpio_regs {
 typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq);
 
 #define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */
+#define MAX_LABEL_SIZE 20
 
 static void __iomem *gpio_base;
 
@@ -201,6 +202,7 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 	struct davinci_gpio_regs __iomem *regs;
 	struct device *dev = &pdev->dev;
 	struct resource *res;
+	char label[MAX_LABEL_SIZE];
 
 	pdata = davinci_gpio_get_pdata(pdev);
 	if (!pdata) {
@@ -237,7 +239,10 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(gpio_base);
 
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		chips[i].chip.label = "DaVinci";
+		snprintf(label, MAX_LABEL_SIZE, "davinci_gpio.%d", i);
+		chips[i].chip.label = devm_kstrdup(dev, label, GFP_KERNEL);
+		if (!chips[i].chip.label)
+			return -ENOMEM;
 
 		chips[i].chip.direction_input = davinci_direction_in;
 		chips[i].chip.get = davinci_gpio_get;
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
index f7a60a441e95..5d38b08d1ee2 100644
--- a/drivers/gpio/gpio-dln2.c
+++ b/drivers/gpio/gpio-dln2.c
@@ -467,7 +467,6 @@ static int dln2_gpio_probe(struct platform_device *pdev)
 	dln2->gpio.base = -1;
 	dln2->gpio.ngpio = pins;
 	dln2->gpio.can_sleep = true;
-	dln2->gpio.irq_not_threaded = true;
 	dln2->gpio.set = dln2_gpio_set;
 	dln2->gpio.get = dln2_gpio_get;
 	dln2->gpio.request = dln2_gpio_request;
diff --git a/drivers/gpio/gpio-etraxfs.c b/drivers/gpio/gpio-etraxfs.c
index 00b022c9acb3..a254d5b07b94 100644
--- a/drivers/gpio/gpio-etraxfs.c
+++ b/drivers/gpio/gpio-etraxfs.c
@@ -471,9 +471,4 @@ static struct platform_driver etraxfs_gpio_driver = {
 	.probe	= etraxfs_gpio_probe,
 };
 
-static int __init etraxfs_gpio_init(void)
-{
-	return platform_driver_register(&etraxfs_gpio_driver);
-}
-
-device_initcall(etraxfs_gpio_init);
+builtin_platform_driver(etraxfs_gpio_driver);
diff --git a/drivers/gpio/gpio-htc-egpio.c b/drivers/gpio/gpio-htc-egpio.c
index 0b4df6051097..271356effb2e 100644
--- a/drivers/gpio/gpio-htc-egpio.c
+++ b/drivers/gpio/gpio-htc-egpio.c
@@ -17,7 +17,7 @@
 #include <linux/platform_data/gpio-htc-egpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/init.h>
 
 struct egpio_chip {
 	int              reg_start;
@@ -160,10 +160,14 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset)
 	bit   = egpio_bit(ei, offset);
 	reg   = egpio->reg_start + egpio_pos(ei, offset);
 
-	value = egpio_readw(ei, reg);
-	pr_debug("readw(%p + %x) = %x\n",
-			ei->base_addr, reg << ei->bus_shift, value);
-	return !!(value & bit);
+	if (test_bit(offset, &egpio->is_out)) {
+		return !!(egpio->cached_values & (1 << offset));
+	} else {
+		value = egpio_readw(ei, reg);
+		pr_debug("readw(%p + %x) = %x\n",
+			 ei->base_addr, reg << ei->bus_shift, value);
+		return !!(value & bit);
+	}
 }
 
 static int egpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -225,6 +229,15 @@ static int egpio_direction_output(struct gpio_chip *chip,
 	}
 }
 
+static int egpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct egpio_chip *egpio;
+
+	egpio = gpiochip_get_data(chip);
+
+	return !test_bit(offset, &egpio->is_out);
+}
+
 static void egpio_write_cache(struct egpio_info *ei)
 {
 	int               i;
@@ -327,6 +340,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 		chip->set             = egpio_set;
 		chip->direction_input = egpio_direction_input;
 		chip->direction_output = egpio_direction_output;
+		chip->get_direction   = egpio_get_direction;
 		chip->base            = pdata->chip[i].gpio_base;
 		chip->ngpio           = pdata->chip[i].num_gpios;
 
@@ -367,24 +381,6 @@ fail:
 	return ret;
 }
 
-static int __exit egpio_remove(struct platform_device *pdev)
-{
-	struct egpio_info *ei = platform_get_drvdata(pdev);
-	unsigned int      irq, irq_end;
-
-	if (ei->chained_irq) {
-		irq_end = ei->irq_start + ei->nirqs;
-		for (irq = ei->irq_start; irq < irq_end; irq++) {
-			irq_set_chip_and_handler(irq, NULL, NULL);
-			irq_set_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-		}
-		irq_set_chained_handler(ei->chained_irq, NULL);
-		device_init_wakeup(&pdev->dev, 0);
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_PM
 static int egpio_suspend(struct platform_device *pdev, pm_message_t state)
 {
@@ -416,8 +412,8 @@ static int egpio_resume(struct platform_device *pdev)
 static struct platform_driver egpio_driver = {
 	.driver = {
 		.name = "htc-egpio",
+		.suppress_bind_attrs = true,
 	},
-	.remove       = __exit_p(egpio_remove),
 	.suspend      = egpio_suspend,
 	.resume       = egpio_resume,
 };
@@ -426,15 +422,5 @@ static int __init egpio_init(void)
 {
 	return platform_driver_probe(&egpio_driver, egpio_probe);
 }
-
-static void __exit egpio_exit(void)
-{
-	platform_driver_unregister(&egpio_driver);
-}
-
 /* start early for dependencies */
 subsys_initcall(egpio_init);
-module_exit(egpio_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kevin O'Connor <kevin@koconnor.net>");
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
index 164de64b11fc..a1e44c221f66 100644
--- a/drivers/gpio/gpio-intel-mid.c
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -421,9 +421,4 @@ static struct pci_driver intel_gpio_driver = {
 	},
 };
 
-static int __init intel_gpio_init(void)
-{
-	return pci_register_driver(&intel_gpio_driver);
-}
-
-device_initcall(intel_gpio_init);
+builtin_pci_driver(intel_gpio_driver);
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index a9aaf9d822b4..4ea4c6a1313b 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -520,20 +520,19 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 				client->irq);
 			return ret;
 		}
-		ret =  gpiochip_irqchip_add(&chip->gpio_chip,
-					    &max732x_irq_chip,
-					    irq_base,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
+						   &max732x_irq_chip,
+						   irq_base,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&client->dev,
 				"could not connect irqchip to gpiochip\n");
 			return ret;
 		}
-		gpiochip_set_chained_irqchip(&chip->gpio_chip,
-					     &max732x_irq_chip,
-					     client->irq,
-					     NULL);
+		gpiochip_set_nested_irqchip(&chip->gpio_chip,
+					    &max732x_irq_chip,
+					    client->irq);
 	}
 
 	return 0;
diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c
index b46b436cb97f..ec8de4190db9 100644
--- a/drivers/gpio/gpio-max77620.c
+++ b/drivers/gpio/gpio-max77620.c
@@ -21,9 +21,6 @@ struct max77620_gpio {
 	struct gpio_chip	gpio_chip;
 	struct regmap		*rmap;
 	struct device		*dev;
-	int			gpio_irq;
-	int			irq_base;
-	int			gpio_base;
 };
 
 static const struct regmap_irq max77620_gpio_irqs[] = {
@@ -254,7 +251,6 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 
 	mgpio->rmap = chip->rmap;
 	mgpio->dev = &pdev->dev;
-	mgpio->gpio_irq = gpio_irq;
 
 	mgpio->gpio_chip.label = pdev->name;
 	mgpio->gpio_chip.parent = &pdev->dev;
@@ -268,7 +264,6 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 	mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR;
 	mgpio->gpio_chip.can_sleep = 1;
 	mgpio->gpio_chip.base = -1;
-	mgpio->irq_base = -1;
 #ifdef CONFIG_OF_GPIO
 	mgpio->gpio_chip.of_node = pdev->dev.parent->of_node;
 #endif
@@ -281,9 +276,8 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	mgpio->gpio_base = mgpio->gpio_chip.base;
-	ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, mgpio->gpio_irq,
-				       IRQF_ONESHOT, mgpio->irq_base,
+	ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, gpio_irq,
+				       IRQF_ONESHOT, -1,
 				       &max77620_gpio_irq_chip,
 				       &chip->gpio_irq_data);
 	if (ret < 0) {
@@ -296,6 +290,7 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 
 static const struct platform_device_id max77620_gpio_devtype[] = {
 	{ .name = "max77620-gpio", },
+	{ .name = "max20024-gpio", },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype);
diff --git a/drivers/gpio/gpio-mb86s7x.c b/drivers/gpio/gpio-mb86s7x.c
index d55af50e7034..ffb73f688ae1 100644
--- a/drivers/gpio/gpio-mb86s7x.c
+++ b/drivers/gpio/gpio-mb86s7x.c
@@ -217,8 +217,4 @@ static struct platform_driver mb86s70_gpio_driver = {
 	.remove = mb86s70_gpio_remove,
 };
 
-static int __init mb86s70_gpio_init(void)
-{
-	return platform_driver_register(&mb86s70_gpio_driver);
-}
-device_initcall(mb86s70_gpio_init);
+builtin_platform_driver(mb86s70_gpio_driver);
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 99d37b56c258..504550665091 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -473,21 +473,20 @@ static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
 		return err;
 	}
 
-	err =  gpiochip_irqchip_add(chip,
-				    &mcp23s08_irq_chip,
-				    0,
-				    handle_simple_irq,
-				    IRQ_TYPE_NONE);
+	err =  gpiochip_irqchip_add_nested(chip,
+					   &mcp23s08_irq_chip,
+					   0,
+					   handle_simple_irq,
+					   IRQ_TYPE_NONE);
 	if (err) {
 		dev_err(chip->parent,
 			"could not connect irqchip to gpiochip: %d\n", err);
 		return err;
 	}
 
-	gpiochip_set_chained_irqchip(chip,
-				     &mcp23s08_irq_chip,
-				     mcp->irq,
-				     NULL);
+	gpiochip_set_nested_irqchip(chip,
+				    &mcp23s08_irq_chip,
+				    mcp->irq);
 
 	return 0;
 }
diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c
index 45b51278b8ee..69e0f4ace465 100644
--- a/drivers/gpio/gpio-merrifield.c
+++ b/drivers/gpio/gpio-merrifield.c
@@ -11,6 +11,7 @@
 
 #include <linux/bitops.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -161,6 +162,34 @@ static int mrfld_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+static int mrfld_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+
+	return (readl(gpdr) & BIT(offset % 32)) ? GPIOF_DIR_OUT : GPIOF_DIR_IN;
+}
+
+static int mrfld_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset,
+				   unsigned int debounce)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gfbr = gpio_reg(chip, offset, GFBR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (debounce)
+		value = readl(gfbr) & ~BIT(offset % 32);
+	else
+		value = readl(gfbr) | BIT(offset % 32);
+	writel(value, gfbr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
 static void mrfld_irq_ack(struct irq_data *d)
 {
 	struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d);
@@ -384,6 +413,8 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 	priv->chip.direction_output = mrfld_gpio_direction_output;
 	priv->chip.get = mrfld_gpio_get;
 	priv->chip.set = mrfld_gpio_set;
+	priv->chip.get_direction = mrfld_gpio_get_direction;
+	priv->chip.set_debounce = mrfld_gpio_set_debounce;
 	priv->chip.base = gpio_base;
 	priv->chip.ngpio = MRFLD_NGPIO;
 	priv->chip.can_sleep = false;
@@ -411,7 +442,7 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 	}
 
 	retval = gpiochip_irqchip_add(&priv->chip, &mrfld_irqchip, irq_base,
-				      handle_simple_irq, IRQ_TYPE_NONE);
+				      handle_bad_irq, IRQ_TYPE_NONE);
 	if (retval) {
 		dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n");
 		return retval;
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index ee1724806f46..1e8fde8cb803 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -87,10 +87,15 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 	u32 val;
 	u32 pin_mask = 1 << d->hwirq;
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 	struct mxs_gpio_port *port = gc->private;
 	void __iomem *pin_addr;
 	int edge;
 
+	if (!(ct->type & type))
+		if (irq_setup_alt_chip(d, type))
+			return -EINVAL;
+
 	port->both_edges &= ~pin_mask;
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:
@@ -119,10 +124,13 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 
 	/* set level or edge */
 	pin_addr = port->base + PINCTRL_IRQLEV(port);
-	if (edge & GPIO_INT_LEV_MASK)
+	if (edge & GPIO_INT_LEV_MASK) {
 		writel(pin_mask, pin_addr + MXS_SET);
-	else
+		writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET);
+	} else {
 		writel(pin_mask, pin_addr + MXS_CLR);
+		writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET);
+	}
 
 	/* set polarity */
 	pin_addr = port->base + PINCTRL_IRQPOL(port);
@@ -202,21 +210,37 @@ static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
-	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
+	gc = irq_alloc_generic_chip("gpio-mxs", 2, irq_base,
 				    port->base, handle_level_irq);
 	if (!gc)
 		return -ENOMEM;
 
 	gc->private = port;
 
-	ct = gc->chip_types;
+	ct = &gc->chip_types[0];
+	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
+	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
+	ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR;
+
+	ct = &gc->chip_types[1];
+	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
 	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
 	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
-	ct->regs.mask = PINCTRL_IRQEN(port);
+	ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR;
+	ct->handler = handle_level_irq;
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
@@ -297,11 +321,8 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 	}
 	port->base = base;
 
-	/*
-	 * select the pin interrupt functionality but initially
-	 * disable the interrupts
-	 */
-	writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
+	/* initially disable the interrupts */
+	writel(0, port->base + PINCTRL_PIN2IRQ(port));
 	writel(0, port->base + PINCTRL_IRQEN(port));
 
 	/* clear address has to be used to clear IRQSTAT bits */
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index fe731f094257..d5d72d84b719 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -74,6 +74,7 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
@@ -635,20 +636,20 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 			return ret;
 		}
 
-		ret =  gpiochip_irqchip_add(&chip->gpio_chip,
-					    &pca953x_irq_chip,
-					    irq_base,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
+						   &pca953x_irq_chip,
+						   irq_base,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&client->dev,
 				"could not connect irqchip to gpiochip\n");
 			return ret;
 		}
 
-		gpiochip_set_chained_irqchip(&chip->gpio_chip,
-					     &pca953x_irq_chip,
-					     client->irq, NULL);
+		gpiochip_set_nested_irqchip(&chip->gpio_chip,
+					    &pca953x_irq_chip,
+					    client->irq);
 	}
 
 	return 0;
@@ -907,6 +908,7 @@ static const struct of_device_id pca953x_dt_ids[] = {
 	{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
 
 	{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
 	{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index d168410e2338..895af42a4513 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -378,9 +378,10 @@ static int pcf857x_probe(struct i2c_client *client,
 
 	/* Enable irqchip if we have an interrupt */
 	if (client->irq) {
-		status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
-					      0, handle_level_irq,
-					      IRQ_TYPE_NONE);
+		status = gpiochip_irqchip_add_nested(&gpio->chip,
+						     &pcf857x_irq_chip,
+						     0, handle_level_irq,
+						     IRQ_TYPE_NONE);
 		if (status) {
 			dev_err(&client->dev, "cannot add irqchip\n");
 			goto fail;
@@ -393,8 +394,8 @@ static int pcf857x_probe(struct i2c_client *client,
 		if (status)
 			goto fail;
 
-		gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
-					     client->irq, NULL);
+		gpiochip_set_nested_irqchip(&gpio->chip, &pcf857x_irq_chip,
+					    client->irq);
 		gpio->irq_parent = client->irq;
 	}
 
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 6e3c1430616f..0a6bfd2b06e5 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
 #include <linux/slab.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm.h>
@@ -50,11 +49,12 @@ struct pl061_context_save_regs {
 };
 #endif
 
-struct pl061_gpio {
+struct pl061 {
 	spinlock_t		lock;
 
 	void __iomem		*base;
 	struct gpio_chip	gc;
+	int			parent_irq;
 
 #ifdef CONFIG_PM
 	struct pl061_context_save_regs csave_regs;
@@ -63,22 +63,22 @@ struct pl061_gpio {
 
 static int pl061_get_direction(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return !(readb(chip->base + GPIODIR) & BIT(offset));
+	return !(readb(pl061->base + GPIODIR) & BIT(offset));
 }
 
 static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	unsigned long flags;
 	unsigned char gpiodir;
 
-	spin_lock_irqsave(&chip->lock, flags);
-	gpiodir = readb(chip->base + GPIODIR);
+	spin_lock_irqsave(&pl061->lock, flags);
+	gpiodir = readb(pl061->base + GPIODIR);
 	gpiodir &= ~(BIT(offset));
-	writeb(gpiodir, chip->base + GPIODIR);
-	spin_unlock_irqrestore(&chip->lock, flags);
+	writeb(gpiodir, pl061->base + GPIODIR);
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
@@ -86,44 +86,44 @@ static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
 static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
 		int value)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	unsigned long flags;
 	unsigned char gpiodir;
 
-	spin_lock_irqsave(&chip->lock, flags);
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
-	gpiodir = readb(chip->base + GPIODIR);
+	spin_lock_irqsave(&pl061->lock, flags);
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	gpiodir = readb(pl061->base + GPIODIR);
 	gpiodir |= BIT(offset);
-	writeb(gpiodir, chip->base + GPIODIR);
+	writeb(gpiodir, pl061->base + GPIODIR);
 
 	/*
 	 * gpio value is set again, because pl061 doesn't allow to set value of
 	 * a gpio pin before configuring it in OUT mode.
 	 */
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
-	spin_unlock_irqrestore(&chip->lock, flags);
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
 
 static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return !!readb(chip->base + (BIT(offset + 2)));
+	return !!readb(pl061->base + (BIT(offset + 2)));
 }
 
 static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
 }
 
 static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	int offset = irqd_to_hwirq(d);
 	unsigned long flags;
 	u8 gpiois, gpioibe, gpioiev;
@@ -143,11 +143,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 	}
 
 
-	spin_lock_irqsave(&chip->lock, flags);
+	spin_lock_irqsave(&pl061->lock, flags);
 
-	gpioiev = readb(chip->base + GPIOIEV);
-	gpiois = readb(chip->base + GPIOIS);
-	gpioibe = readb(chip->base + GPIOIBE);
+	gpioiev = readb(pl061->base + GPIOIEV);
+	gpiois = readb(pl061->base + GPIOIS);
+	gpioibe = readb(pl061->base + GPIOIBE);
 
 	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 		bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
@@ -199,11 +199,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 			 offset);
 	}
 
-	writeb(gpiois, chip->base + GPIOIS);
-	writeb(gpioibe, chip->base + GPIOIBE);
-	writeb(gpioiev, chip->base + GPIOIEV);
+	writeb(gpiois, pl061->base + GPIOIS);
+	writeb(gpioibe, pl061->base + GPIOIBE);
+	writeb(gpioiev, pl061->base + GPIOIEV);
 
-	spin_unlock_irqrestore(&chip->lock, flags);
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
@@ -213,12 +213,12 @@ static void pl061_irq_handler(struct irq_desc *desc)
 	unsigned long pending;
 	int offset;
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	struct irq_chip *irqchip = irq_desc_get_chip(desc);
 
 	chained_irq_enter(irqchip, desc);
 
-	pending = readb(chip->base + GPIOMIS);
+	pending = readb(pl061->base + GPIOMIS);
 	if (pending) {
 		for_each_set_bit(offset, &pending, PL061_GPIO_NR)
 			generic_handle_irq(irq_find_mapping(gc->irqdomain,
@@ -231,27 +231,27 @@ static void pl061_irq_handler(struct irq_desc *desc)
 static void pl061_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 	u8 gpioie;
 
-	spin_lock(&chip->lock);
-	gpioie = readb(chip->base + GPIOIE) & ~mask;
-	writeb(gpioie, chip->base + GPIOIE);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) & ~mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	spin_unlock(&pl061->lock);
 }
 
 static void pl061_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 	u8 gpioie;
 
-	spin_lock(&chip->lock);
-	gpioie = readb(chip->base + GPIOIE) | mask;
-	writeb(gpioie, chip->base + GPIOIE);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) | mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	spin_unlock(&pl061->lock);
 }
 
 /**
@@ -265,19 +265,20 @@ static void pl061_irq_unmask(struct irq_data *d)
 static void pl061_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 
-	spin_lock(&chip->lock);
-	writeb(mask, chip->base + GPIOIC);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	writeb(mask, pl061->base + GPIOIC);
+	spin_unlock(&pl061->lock);
 }
 
 static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return irq_set_irq_wake(gc->irq_parent, state);
+	return irq_set_irq_wake(pl061->parent_irq, state);
 }
 
 static struct irq_chip pl061_irqchip = {
@@ -292,81 +293,60 @@ static struct irq_chip pl061_irqchip = {
 static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct device *dev = &adev->dev;
-	struct pl061_platform_data *pdata = dev_get_platdata(dev);
-	struct pl061_gpio *chip;
-	int ret, irq, i, irq_base;
+	struct pl061 *pl061;
+	int ret, irq;
 
-	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL)
+	pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL);
+	if (pl061 == NULL)
 		return -ENOMEM;
 
-	if (pdata) {
-		chip->gc.base = pdata->gpio_base;
-		irq_base = pdata->irq_base;
-		if (irq_base <= 0) {
-			dev_err(&adev->dev, "invalid IRQ base in pdata\n");
-			return -ENODEV;
-		}
-	} else {
-		chip->gc.base = -1;
-		irq_base = 0;
-	}
-
-	chip->base = devm_ioremap_resource(dev, &adev->res);
-	if (IS_ERR(chip->base))
-		return PTR_ERR(chip->base);
+	pl061->base = devm_ioremap_resource(dev, &adev->res);
+	if (IS_ERR(pl061->base))
+		return PTR_ERR(pl061->base);
 
-	spin_lock_init(&chip->lock);
+	spin_lock_init(&pl061->lock);
 	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
-		chip->gc.request = gpiochip_generic_request;
-		chip->gc.free = gpiochip_generic_free;
+		pl061->gc.request = gpiochip_generic_request;
+		pl061->gc.free = gpiochip_generic_free;
 	}
 
-	chip->gc.get_direction = pl061_get_direction;
-	chip->gc.direction_input = pl061_direction_input;
-	chip->gc.direction_output = pl061_direction_output;
-	chip->gc.get = pl061_get_value;
-	chip->gc.set = pl061_set_value;
-	chip->gc.ngpio = PL061_GPIO_NR;
-	chip->gc.label = dev_name(dev);
-	chip->gc.parent = dev;
-	chip->gc.owner = THIS_MODULE;
-
-	ret = gpiochip_add_data(&chip->gc, chip);
+	pl061->gc.base = -1;
+	pl061->gc.get_direction = pl061_get_direction;
+	pl061->gc.direction_input = pl061_direction_input;
+	pl061->gc.direction_output = pl061_direction_output;
+	pl061->gc.get = pl061_get_value;
+	pl061->gc.set = pl061_set_value;
+	pl061->gc.ngpio = PL061_GPIO_NR;
+	pl061->gc.label = dev_name(dev);
+	pl061->gc.parent = dev;
+	pl061->gc.owner = THIS_MODULE;
+
+	ret = gpiochip_add_data(&pl061->gc, pl061);
 	if (ret)
 		return ret;
 
 	/*
 	 * irq_chip support
 	 */
-	writeb(0, chip->base + GPIOIE); /* disable irqs */
+	writeb(0, pl061->base + GPIOIE); /* disable irqs */
 	irq = adev->irq[0];
 	if (irq < 0) {
 		dev_err(&adev->dev, "invalid IRQ\n");
 		return -ENODEV;
 	}
+	pl061->parent_irq = irq;
 
-	ret = gpiochip_irqchip_add(&chip->gc, &pl061_irqchip,
-				   irq_base, handle_bad_irq,
+	ret = gpiochip_irqchip_add(&pl061->gc, &pl061_irqchip,
+				   0, handle_bad_irq,
 				   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_info(&adev->dev, "could not add irqchip\n");
 		return ret;
 	}
-	gpiochip_set_chained_irqchip(&chip->gc, &pl061_irqchip,
+	gpiochip_set_chained_irqchip(&pl061->gc, &pl061_irqchip,
 				     irq, pl061_irq_handler);
 
-	for (i = 0; i < PL061_GPIO_NR; i++) {
-		if (pdata) {
-			if (pdata->directions & (BIT(i)))
-				pl061_direction_output(&chip->gc, i,
-						pdata->values & (BIT(i)));
-			else
-				pl061_direction_input(&chip->gc, i);
-		}
-	}
-
-	amba_set_drvdata(adev, chip);
+	amba_set_drvdata(adev, pl061);
 	dev_info(&adev->dev, "PL061 GPIO chip @%pa registered\n",
 		 &adev->res.start);
 
@@ -376,20 +356,20 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 #ifdef CONFIG_PM
 static int pl061_suspend(struct device *dev)
 {
-	struct pl061_gpio *chip = dev_get_drvdata(dev);
+	struct pl061 *pl061 = dev_get_drvdata(dev);
 	int offset;
 
-	chip->csave_regs.gpio_data = 0;
-	chip->csave_regs.gpio_dir = readb(chip->base + GPIODIR);
-	chip->csave_regs.gpio_is = readb(chip->base + GPIOIS);
-	chip->csave_regs.gpio_ibe = readb(chip->base + GPIOIBE);
-	chip->csave_regs.gpio_iev = readb(chip->base + GPIOIEV);
-	chip->csave_regs.gpio_ie = readb(chip->base + GPIOIE);
+	pl061->csave_regs.gpio_data = 0;
+	pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR);
+	pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS);
+	pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE);
+	pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV);
+	pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE);
 
 	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
-		if (chip->csave_regs.gpio_dir & (BIT(offset)))
-			chip->csave_regs.gpio_data |=
-				pl061_get_value(&chip->gc, offset) << offset;
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061->csave_regs.gpio_data |=
+				pl061_get_value(&pl061->gc, offset) << offset;
 	}
 
 	return 0;
@@ -397,22 +377,22 @@ static int pl061_suspend(struct device *dev)
 
 static int pl061_resume(struct device *dev)
 {
-	struct pl061_gpio *chip = dev_get_drvdata(dev);
+	struct pl061 *pl061 = dev_get_drvdata(dev);
 	int offset;
 
 	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
-		if (chip->csave_regs.gpio_dir & (BIT(offset)))
-			pl061_direction_output(&chip->gc, offset,
-					chip->csave_regs.gpio_data &
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061_direction_output(&pl061->gc, offset,
+					pl061->csave_regs.gpio_data &
 					(BIT(offset)));
 		else
-			pl061_direction_input(&chip->gc, offset);
+			pl061_direction_input(&pl061->gc, offset);
 	}
 
-	writeb(chip->csave_regs.gpio_is, chip->base + GPIOIS);
-	writeb(chip->csave_regs.gpio_ibe, chip->base + GPIOIBE);
-	writeb(chip->csave_regs.gpio_iev, chip->base + GPIOIEV);
-	writeb(chip->csave_regs.gpio_ie, chip->base + GPIOIE);
+	writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS);
+	writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE);
+	writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV);
+	writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE);
 
 	return 0;
 }
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 5b0042776ec7..16cbc5702865 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -413,7 +413,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
 		    stmpe->partnum != STMPE1801) {
 			stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
 			stmpe_reg_write(stmpe,
-					stmpe->regs[STMPE_IDX_GPEDR_LSB + i],
+					stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
 					status[i]);
 		}
 	}
@@ -484,21 +484,20 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 				if (stmpe_gpio->norequest_mask & BIT(i))
 					clear_bit(i, stmpe_gpio->chip.irq_valid_mask);
 		}
-		ret =  gpiochip_irqchip_add(&stmpe_gpio->chip,
-					    &stmpe_gpio_irq_chip,
-					    0,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&stmpe_gpio->chip,
+						   &stmpe_gpio_irq_chip,
+						   0,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"could not connect irqchip to gpiochip\n");
 			goto out_disable;
 		}
 
-		gpiochip_set_chained_irqchip(&stmpe_gpio->chip,
-					     &stmpe_gpio_irq_chip,
-					     irq,
-					     NULL);
+		gpiochip_set_nested_irqchip(&stmpe_gpio->chip,
+					    &stmpe_gpio_irq_chip,
+					    irq);
 	}
 
 	platform_set_drvdata(pdev, stmpe_gpio);
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
deleted file mode 100644
index af95de89db01..000000000000
--- a/drivers/gpio/gpio-sx150x.c
+++ /dev/null
@@ -1,792 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * Driver for Semtech SX150X I2C GPIO Expanders
- *
- * Author: Gregory Bean <gbean@codeaurora.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#include <linux/of_device.h>
-
-#define NO_UPDATE_PENDING	-1
-
-/* The chip models of sx150x */
-#define SX150X_123 0
-#define SX150X_456 1
-#define SX150X_789 2
-
-struct sx150x_123_pri {
-	u8 reg_pld_mode;
-	u8 reg_pld_table0;
-	u8 reg_pld_table1;
-	u8 reg_pld_table2;
-	u8 reg_pld_table3;
-	u8 reg_pld_table4;
-	u8 reg_advance;
-};
-
-struct sx150x_456_pri {
-	u8 reg_pld_mode;
-	u8 reg_pld_table0;
-	u8 reg_pld_table1;
-	u8 reg_pld_table2;
-	u8 reg_pld_table3;
-	u8 reg_pld_table4;
-	u8 reg_advance;
-};
-
-struct sx150x_789_pri {
-	u8 reg_drain;
-	u8 reg_polarity;
-	u8 reg_clock;
-	u8 reg_misc;
-	u8 reg_reset;
-	u8 ngpios;
-};
-
-struct sx150x_device_data {
-	u8 model;
-	u8 reg_pullup;
-	u8 reg_pulldn;
-	u8 reg_dir;
-	u8 reg_data;
-	u8 reg_irq_mask;
-	u8 reg_irq_src;
-	u8 reg_sense;
-	u8 ngpios;
-	union {
-		struct sx150x_123_pri x123;
-		struct sx150x_456_pri x456;
-		struct sx150x_789_pri x789;
-	} pri;
-};
-
-/**
- * struct sx150x_platform_data - config data for SX150x driver
- * @gpio_base: The index number of the first GPIO assigned to this
- *             GPIO expander.  The expander will create a block of
- *             consecutively numbered gpios beginning at the given base,
- *             with the size of the block depending on the model of the
- *             expander chip.
- * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
- *                instead of as an oscillator, increasing the size of the
- *                GP(I)O pool created by this expander by one.  The
- *                output-only GPO pin will be added at the end of the block.
- * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
- *                 for each IO line in the expander.  Setting the bit at
- *                 position n will enable the pull-up for the IO at
- *                 the corresponding offset.  For chips with fewer than
- *                 16 IO pins, high-end bits are ignored.
- * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
- *                 resistor for each IO line in the expander. Setting the
- *                 bit at position n will enable the pull-down for the IO at
- *                 the corresponding offset.  For chips with fewer than
- *                 16 IO pins, high-end bits are ignored.
- * @io_polarity: A bit-mask which enables polarity inversion for each IO line
- *               in the expander.  Setting the bit at position n inverts
- *               the polarity of that IO line, while clearing it results
- *               in normal polarity. For chips with fewer than 16 IO pins,
- *               high-end bits are ignored.
- * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
- *               is connected, via which it reports interrupt events
- *               across all GPIO lines.  This must be a real,
- *               pre-existing IRQ line.
- *               Setting this value < 0 disables the irq_chip functionality
- *               of the driver.
- * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
- *            IRQ lines will appear.  Similarly to gpio_base, the expander
- *            will create a block of irqs beginning at this number.
- *            This value is ignored if irq_summary is < 0.
- * @reset_during_probe: If set to true, the driver will trigger a full
- *                      reset of the chip at the beginning of the probe
- *                      in order to place it in a known state.
- */
-struct sx150x_platform_data {
-	unsigned gpio_base;
-	bool     oscio_is_gpo;
-	u16      io_pullup_ena;
-	u16      io_pulldn_ena;
-	u16      io_polarity;
-	int      irq_summary;
-	unsigned irq_base;
-	bool     reset_during_probe;
-};
-
-struct sx150x_chip {
-	struct gpio_chip                 gpio_chip;
-	struct i2c_client               *client;
-	const struct sx150x_device_data *dev_cfg;
-	int                              irq_summary;
-	int                              irq_base;
-	int				 irq_update;
-	u32                              irq_sense;
-	u32				 irq_masked;
-	u32				 dev_sense;
-	u32				 dev_masked;
-	struct irq_chip                  irq_chip;
-	struct mutex                     lock;
-};
-
-static const struct sx150x_device_data sx150x_devices[] = {
-	[0] = { /* sx1508q */
-		.model = SX150X_789,
-		.reg_pullup	= 0x03,
-		.reg_pulldn	= 0x04,
-		.reg_dir	= 0x07,
-		.reg_data	= 0x08,
-		.reg_irq_mask	= 0x09,
-		.reg_irq_src	= 0x0c,
-		.reg_sense	= 0x0b,
-		.pri.x789 = {
-			.reg_drain	= 0x05,
-			.reg_polarity	= 0x06,
-			.reg_clock	= 0x0f,
-			.reg_misc	= 0x10,
-			.reg_reset	= 0x7d,
-		},
-		.ngpios = 8,
-	},
-	[1] = { /* sx1509q */
-		.model = SX150X_789,
-		.reg_pullup	= 0x07,
-		.reg_pulldn	= 0x09,
-		.reg_dir	= 0x0f,
-		.reg_data	= 0x11,
-		.reg_irq_mask	= 0x13,
-		.reg_irq_src	= 0x19,
-		.reg_sense	= 0x17,
-		.pri.x789 = {
-			.reg_drain	= 0x0b,
-			.reg_polarity	= 0x0d,
-			.reg_clock	= 0x1e,
-			.reg_misc	= 0x1f,
-			.reg_reset	= 0x7d,
-		},
-		.ngpios	= 16
-	},
-	[2] = { /* sx1506q */
-		.model = SX150X_456,
-		.reg_pullup	= 0x05,
-		.reg_pulldn	= 0x07,
-		.reg_dir	= 0x03,
-		.reg_data	= 0x01,
-		.reg_irq_mask	= 0x09,
-		.reg_irq_src	= 0x0f,
-		.reg_sense	= 0x0d,
-		.pri.x456 = {
-			.reg_pld_mode	= 0x21,
-			.reg_pld_table0	= 0x23,
-			.reg_pld_table1	= 0x25,
-			.reg_pld_table2	= 0x27,
-			.reg_pld_table3	= 0x29,
-			.reg_pld_table4	= 0x2b,
-			.reg_advance	= 0xad,
-		},
-		.ngpios	= 16
-	},
-	[3] = { /* sx1502q */
-		.model = SX150X_123,
-		.reg_pullup	= 0x02,
-		.reg_pulldn	= 0x03,
-		.reg_dir	= 0x01,
-		.reg_data	= 0x00,
-		.reg_irq_mask	= 0x05,
-		.reg_irq_src	= 0x08,
-		.reg_sense	= 0x07,
-		.pri.x123 = {
-			.reg_pld_mode	= 0x10,
-			.reg_pld_table0	= 0x11,
-			.reg_pld_table1	= 0x12,
-			.reg_pld_table2	= 0x13,
-			.reg_pld_table3	= 0x14,
-			.reg_pld_table4	= 0x15,
-			.reg_advance	= 0xad,
-		},
-		.ngpios	= 8,
-	},
-};
-
-static const struct i2c_device_id sx150x_id[] = {
-	{"sx1508q", 0},
-	{"sx1509q", 1},
-	{"sx1506q", 2},
-	{"sx1502q", 3},
-	{}
-};
-
-static const struct of_device_id sx150x_of_match[] = {
-	{ .compatible = "semtech,sx1508q" },
-	{ .compatible = "semtech,sx1509q" },
-	{ .compatible = "semtech,sx1506q" },
-	{ .compatible = "semtech,sx1502q" },
-	{},
-};
-
-static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
-{
-	s32 err = i2c_smbus_write_byte_data(client, reg, val);
-
-	if (err < 0)
-		dev_warn(&client->dev,
-			"i2c write fail: can't write %02x to %02x: %d\n",
-			val, reg, err);
-	return err;
-}
-
-static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
-{
-	s32 err = i2c_smbus_read_byte_data(client, reg);
-
-	if (err >= 0)
-		*val = err;
-	else
-		dev_warn(&client->dev,
-			"i2c read fail: can't read from %02x: %d\n",
-			reg, err);
-	return err;
-}
-
-static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
-{
-	return (chip->dev_cfg->ngpios == offset);
-}
-
-/*
- * These utility functions solve the common problem of locating and setting
- * configuration bits.  Configuration bits are grouped into registers
- * whose indexes increase downwards.  For example, with eight-bit registers,
- * sixteen gpios would have their config bits grouped in the following order:
- * REGISTER N-1 [ f e d c b a 9 8 ]
- *          N   [ 7 6 5 4 3 2 1 0 ]
- *
- * For multi-bit configurations, the pattern gets wider:
- * REGISTER N-3 [ f f e e d d c c ]
- *          N-2 [ b b a a 9 9 8 8 ]
- *          N-1 [ 7 7 6 6 5 5 4 4 ]
- *          N   [ 3 3 2 2 1 1 0 0 ]
- *
- * Given the address of the starting register 'N', the index of the gpio
- * whose configuration we seek to change, and the width in bits of that
- * configuration, these functions allow us to locate the correct
- * register and mask the correct bits.
- */
-static inline void sx150x_find_cfg(u8 offset, u8 width,
-				u8 *reg, u8 *mask, u8 *shift)
-{
-	*reg   -= offset * width / 8;
-	*mask   = (1 << width) - 1;
-	*shift  = (offset * width) % 8;
-	*mask <<= *shift;
-}
-
-static s32 sx150x_write_cfg(struct sx150x_chip *chip,
-			u8 offset, u8 width, u8 reg, u8 val)
-{
-	u8  mask;
-	u8  data;
-	u8  shift;
-	s32 err;
-
-	sx150x_find_cfg(offset, width, &reg, &mask, &shift);
-	err = sx150x_i2c_read(chip->client, reg, &data);
-	if (err < 0)
-		return err;
-
-	data &= ~mask;
-	data |= (val << shift) & mask;
-	return sx150x_i2c_write(chip->client, reg, data);
-}
-
-static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
-{
-	u8  reg = chip->dev_cfg->reg_data;
-	u8  mask;
-	u8  data;
-	u8  shift;
-	s32 err;
-
-	sx150x_find_cfg(offset, 1, &reg, &mask, &shift);
-	err = sx150x_i2c_read(chip->client, reg, &data);
-	if (err >= 0)
-		err = (data & mask) != 0 ? 1 : 0;
-
-	return err;
-}
-
-static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
-{
-	sx150x_i2c_write(chip->client,
-			chip->dev_cfg->pri.x789.reg_clock,
-			(val ? 0x1f : 0x10));
-}
-
-static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
-{
-	sx150x_write_cfg(chip,
-			offset,
-			1,
-			chip->dev_cfg->reg_data,
-			(val ? 1 : 0));
-}
-
-static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
-{
-	return sx150x_write_cfg(chip,
-				offset,
-				1,
-				chip->dev_cfg->reg_dir,
-				1);
-}
-
-static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
-{
-	int err;
-
-	err = sx150x_write_cfg(chip,
-			offset,
-			1,
-			chip->dev_cfg->reg_data,
-			(val ? 1 : 0));
-	if (err >= 0)
-		err = sx150x_write_cfg(chip,
-				offset,
-				1,
-				chip->dev_cfg->reg_dir,
-				0);
-	return err;
-}
-
-static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(gc);
-	int status = -EINVAL;
-
-	if (!offset_is_oscio(chip, offset)) {
-		mutex_lock(&chip->lock);
-		status = sx150x_get_io(chip, offset);
-		mutex_unlock(&chip->lock);
-	}
-
-	return (status < 0) ? status : !!status;
-}
-
-static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(gc);
-
-	mutex_lock(&chip->lock);
-	if (offset_is_oscio(chip, offset))
-		sx150x_set_oscio(chip, val);
-	else
-		sx150x_set_io(chip, offset, val);
-	mutex_unlock(&chip->lock);
-}
-
-static int sx150x_gpio_set_single_ended(struct gpio_chip *gc,
-					unsigned offset,
-                                        enum single_ended_mode mode)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(gc);
-
-	/* On the SX160X 789 we can set open drain */
-	if (chip->dev_cfg->model != SX150X_789)
-		return -ENOTSUPP;
-
-	if (mode == LINE_MODE_PUSH_PULL)
-		return sx150x_write_cfg(chip,
-					offset,
-					1,
-					chip->dev_cfg->pri.x789.reg_drain,
-					0);
-
-	if (mode == LINE_MODE_OPEN_DRAIN)
-		return sx150x_write_cfg(chip,
-					offset,
-					1,
-					chip->dev_cfg->pri.x789.reg_drain,
-					1);
-	return -ENOTSUPP;
-}
-
-static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(gc);
-	int status = -EINVAL;
-
-	if (!offset_is_oscio(chip, offset)) {
-		mutex_lock(&chip->lock);
-		status = sx150x_io_input(chip, offset);
-		mutex_unlock(&chip->lock);
-	}
-	return status;
-}
-
-static int sx150x_gpio_direction_output(struct gpio_chip *gc,
-					unsigned offset,
-					int val)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(gc);
-	int status = 0;
-
-	if (!offset_is_oscio(chip, offset)) {
-		mutex_lock(&chip->lock);
-		status = sx150x_io_output(chip, offset, val);
-		mutex_unlock(&chip->lock);
-	}
-	return status;
-}
-
-static void sx150x_irq_mask(struct irq_data *d)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned n = d->hwirq;
-
-	chip->irq_masked |= (1 << n);
-	chip->irq_update = n;
-}
-
-static void sx150x_irq_unmask(struct irq_data *d)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned n = d->hwirq;
-
-	chip->irq_masked &= ~(1 << n);
-	chip->irq_update = n;
-}
-
-static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned n, val = 0;
-
-	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
-		return -EINVAL;
-
-	n = d->hwirq;
-
-	if (flow_type & IRQ_TYPE_EDGE_RISING)
-		val |= 0x1;
-	if (flow_type & IRQ_TYPE_EDGE_FALLING)
-		val |= 0x2;
-
-	chip->irq_sense &= ~(3UL << (n * 2));
-	chip->irq_sense |= val << (n * 2);
-	chip->irq_update = n;
-	return 0;
-}
-
-static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
-{
-	struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
-	unsigned nhandled = 0;
-	unsigned sub_irq;
-	unsigned n;
-	s32 err;
-	u8 val;
-	int i;
-
-	for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
-		err = sx150x_i2c_read(chip->client,
-				      chip->dev_cfg->reg_irq_src - i,
-				      &val);
-		if (err < 0)
-			continue;
-
-		sx150x_i2c_write(chip->client,
-				chip->dev_cfg->reg_irq_src - i,
-				val);
-		for (n = 0; n < 8; ++n) {
-			if (val & (1 << n)) {
-				sub_irq = irq_find_mapping(
-					chip->gpio_chip.irqdomain,
-					(i * 8) + n);
-				handle_nested_irq(sub_irq);
-				++nhandled;
-			}
-		}
-	}
-
-	return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
-}
-
-static void sx150x_irq_bus_lock(struct irq_data *d)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-
-	mutex_lock(&chip->lock);
-}
-
-static void sx150x_irq_bus_sync_unlock(struct irq_data *d)
-{
-	struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned n;
-
-	if (chip->irq_update == NO_UPDATE_PENDING)
-		goto out;
-
-	n = chip->irq_update;
-	chip->irq_update = NO_UPDATE_PENDING;
-
-	/* Avoid updates if nothing changed */
-	if (chip->dev_sense == chip->irq_sense &&
-	    chip->dev_masked == chip->irq_masked)
-		goto out;
-
-	chip->dev_sense = chip->irq_sense;
-	chip->dev_masked = chip->irq_masked;
-
-	if (chip->irq_masked & (1 << n)) {
-		sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1);
-		sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0);
-	} else {
-		sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0);
-		sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense,
-				 chip->irq_sense >> (n * 2));
-	}
-out:
-	mutex_unlock(&chip->lock);
-}
-
-static void sx150x_init_chip(struct sx150x_chip *chip,
-			struct i2c_client *client,
-			kernel_ulong_t driver_data,
-			struct sx150x_platform_data *pdata)
-{
-	mutex_init(&chip->lock);
-
-	chip->client                     = client;
-	chip->dev_cfg                    = &sx150x_devices[driver_data];
-	chip->gpio_chip.parent              = &client->dev;
-	chip->gpio_chip.label            = client->name;
-	chip->gpio_chip.direction_input  = sx150x_gpio_direction_input;
-	chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
-	chip->gpio_chip.get              = sx150x_gpio_get;
-	chip->gpio_chip.set              = sx150x_gpio_set;
-	chip->gpio_chip.set_single_ended = sx150x_gpio_set_single_ended;
-	chip->gpio_chip.base             = pdata->gpio_base;
-	chip->gpio_chip.can_sleep        = true;
-	chip->gpio_chip.ngpio            = chip->dev_cfg->ngpios;
-#ifdef CONFIG_OF_GPIO
-	chip->gpio_chip.of_node          = client->dev.of_node;
-	chip->gpio_chip.of_gpio_n_cells  = 2;
-#endif
-	if (pdata->oscio_is_gpo)
-		++chip->gpio_chip.ngpio;
-
-	chip->irq_chip.name                = client->name;
-	chip->irq_chip.irq_mask            = sx150x_irq_mask;
-	chip->irq_chip.irq_unmask          = sx150x_irq_unmask;
-	chip->irq_chip.irq_set_type        = sx150x_irq_set_type;
-	chip->irq_chip.irq_bus_lock        = sx150x_irq_bus_lock;
-	chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
-	chip->irq_summary                  = -1;
-	chip->irq_base                     = -1;
-	chip->irq_masked                   = ~0;
-	chip->irq_sense                    = 0;
-	chip->dev_masked                   = ~0;
-	chip->dev_sense                    = 0;
-	chip->irq_update		   = NO_UPDATE_PENDING;
-}
-
-static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
-{
-	int err = 0;
-	unsigned n;
-
-	for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
-		err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
-	return err;
-}
-
-static int sx150x_reset(struct sx150x_chip *chip)
-{
-	int err;
-
-	err = i2c_smbus_write_byte_data(chip->client,
-					chip->dev_cfg->pri.x789.reg_reset,
-					0x12);
-	if (err < 0)
-		return err;
-
-	err = i2c_smbus_write_byte_data(chip->client,
-					chip->dev_cfg->pri.x789.reg_reset,
-					0x34);
-	return err;
-}
-
-static int sx150x_init_hw(struct sx150x_chip *chip,
-			struct sx150x_platform_data *pdata)
-{
-	int err = 0;
-
-	if (pdata->reset_during_probe) {
-		err = sx150x_reset(chip);
-		if (err < 0)
-			return err;
-	}
-
-	if (chip->dev_cfg->model == SX150X_789)
-		err = sx150x_i2c_write(chip->client,
-				chip->dev_cfg->pri.x789.reg_misc,
-				0x01);
-	else if (chip->dev_cfg->model == SX150X_456)
-		err = sx150x_i2c_write(chip->client,
-				chip->dev_cfg->pri.x456.reg_advance,
-				0x04);
-	else
-		err = sx150x_i2c_write(chip->client,
-				chip->dev_cfg->pri.x123.reg_advance,
-				0x00);
-	if (err < 0)
-		return err;
-
-	err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
-			pdata->io_pullup_ena);
-	if (err < 0)
-		return err;
-
-	err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
-			pdata->io_pulldn_ena);
-	if (err < 0)
-		return err;
-
-	if (chip->dev_cfg->model == SX150X_789) {
-		err = sx150x_init_io(chip,
-				chip->dev_cfg->pri.x789.reg_polarity,
-				pdata->io_polarity);
-		if (err < 0)
-			return err;
-	} else if (chip->dev_cfg->model == SX150X_456) {
-		/* Set all pins to work in normal mode */
-		err = sx150x_init_io(chip,
-				chip->dev_cfg->pri.x456.reg_pld_mode,
-				0);
-		if (err < 0)
-			return err;
-	} else {
-		/* Set all pins to work in normal mode */
-		err = sx150x_init_io(chip,
-				chip->dev_cfg->pri.x123.reg_pld_mode,
-				0);
-		if (err < 0)
-			return err;
-	}
-
-
-	if (pdata->oscio_is_gpo)
-		sx150x_set_oscio(chip, 0);
-
-	return err;
-}
-
-static int sx150x_install_irq_chip(struct sx150x_chip *chip,
-				int irq_summary,
-				int irq_base)
-{
-	int err;
-
-	chip->irq_summary = irq_summary;
-	chip->irq_base    = irq_base;
-
-	/* Add gpio chip to irq subsystem */
-	err = gpiochip_irqchip_add(&chip->gpio_chip,
-		&chip->irq_chip, chip->irq_base,
-		handle_edge_irq, IRQ_TYPE_EDGE_BOTH);
-	if (err) {
-		dev_err(&chip->client->dev,
-			"could not connect irqchip to gpiochip\n");
-		return  err;
-	}
-
-	err = devm_request_threaded_irq(&chip->client->dev,
-			irq_summary, NULL, sx150x_irq_thread_fn,
-			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING,
-			chip->irq_chip.name, chip);
-	if (err < 0) {
-		chip->irq_summary = -1;
-		chip->irq_base    = -1;
-	}
-
-	return err;
-}
-
-static int sx150x_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
-{
-	static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_WRITE_WORD_DATA;
-	struct sx150x_platform_data *pdata;
-	struct sx150x_chip *chip;
-	int rc;
-
-	pdata = dev_get_platdata(&client->dev);
-	if (!pdata)
-		return -EINVAL;
-
-	if (!i2c_check_functionality(client->adapter, i2c_funcs))
-		return -ENOSYS;
-
-	chip = devm_kzalloc(&client->dev,
-		sizeof(struct sx150x_chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
-	sx150x_init_chip(chip, client, id->driver_data, pdata);
-	rc = sx150x_init_hw(chip, pdata);
-	if (rc < 0)
-		return rc;
-
-	rc = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
-	if (rc)
-		return rc;
-
-	if (pdata->irq_summary >= 0) {
-		rc = sx150x_install_irq_chip(chip,
-					pdata->irq_summary,
-					pdata->irq_base);
-		if (rc < 0)
-			return rc;
-	}
-
-	i2c_set_clientdata(client, chip);
-
-	return 0;
-}
-
-static struct i2c_driver sx150x_driver = {
-	.driver = {
-		.name = "sx150x",
-		.of_match_table = of_match_ptr(sx150x_of_match),
-	},
-	.probe    = sx150x_probe,
-	.id_table = sx150x_id,
-};
-
-static int __init sx150x_init(void)
-{
-	return i2c_add_driver(&sx150x_driver);
-}
-subsys_initcall(sx150x_init);
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index d6e21f1a70a9..be97101c2c9a 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -337,21 +337,20 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret =  gpiochip_irqchip_add(&tc3589x_gpio->chip,
-				    &tc3589x_gpio_irq_chip,
-				    0,
-				    handle_simple_irq,
-				    IRQ_TYPE_NONE);
+	ret =  gpiochip_irqchip_add_nested(&tc3589x_gpio->chip,
+					   &tc3589x_gpio_irq_chip,
+					   0,
+					   handle_simple_irq,
+					   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"could not connect irqchip to gpiochip\n");
 		return ret;
 	}
 
-	gpiochip_set_chained_irqchip(&tc3589x_gpio->chip,
-				     &tc3589x_gpio_irq_chip,
-				     irq,
-				     NULL);
+	gpiochip_set_nested_irqchip(&tc3589x_gpio->chip,
+				    &tc3589x_gpio_irq_chip,
+				    irq);
 
 	platform_set_drvdata(pdev, tc3589x_gpio);
 
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 3edb09cb9ee0..521fbe338589 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -283,8 +283,4 @@ static struct platform_driver vf610_gpio_driver = {
 	.probe		= vf610_gpio_probe,
 };
 
-static int __init gpio_vf610_init(void)
-{
-	return platform_driver_register(&vf610_gpio_driver);
-}
-device_initcall(gpio_vf610_init);
+builtin_platform_driver(vf610_gpio_driver);
diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index d0ddba7a9d08..34baee5b1dd6 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -426,8 +426,8 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = gpiochip_irqchip_add(&wg->chip, &wcove_irqchip, 0,
-			     handle_simple_irq, IRQ_TYPE_NONE);
+	ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0,
+					  handle_simple_irq, IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(dev, "Failed to add irqchip: %d\n", ret);
 		return ret;
@@ -446,6 +446,8 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
+
 	return 0;
 }
 
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 72a4b326fd0d..a3faefa44f68 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -468,7 +468,8 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
 	int ret;
 
 	memset(&args, 0, sizeof(args));
-	ret = acpi_node_get_property_reference(fwnode, propname, index, &args);
+	ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
+						 &args);
 	if (ret) {
 		struct acpi_device *adev = to_acpi_device_node(fwnode);
 
@@ -483,13 +484,13 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
 	 * on returned args.
 	 */
 	lookup->adev = args.adev;
-	if (args.nargs >= 2) {
-		lookup->index = args.args[0];
-		lookup->pin_index = args.args[1];
-		/* 3rd argument, if present is used to specify active_low. */
-		if (args.nargs >= 3)
-			lookup->active_low = !!args.args[2];
-	}
+	if (args.nargs != 3)
+		return -EPROTO;
+
+	lookup->index = args.args[0];
+	lookup->pin_index = args.args[1];
+	lookup->active_low = !!args.args[2];
+
 	return 0;
 }
 
@@ -859,6 +860,77 @@ static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
 	}
 }
 
+static struct gpio_desc *acpi_gpiochip_parse_own_gpio(
+	struct acpi_gpio_chip *achip, struct fwnode_handle *fwnode,
+	const char **name, unsigned int *lflags, unsigned int *dflags)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct gpio_desc *desc;
+	u32 gpios[2];
+	int ret;
+
+	*lflags = 0;
+	*dflags = 0;
+	*name = NULL;
+
+	ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
+					     ARRAY_SIZE(gpios));
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	ret = acpi_gpiochip_pin_to_gpio_offset(chip->gpiodev, gpios[0]);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	desc = gpiochip_get_desc(chip, ret);
+	if (IS_ERR(desc))
+		return desc;
+
+	if (gpios[1])
+		*lflags |= GPIO_ACTIVE_LOW;
+
+	if (fwnode_property_present(fwnode, "input"))
+		*dflags |= GPIOD_IN;
+	else if (fwnode_property_present(fwnode, "output-low"))
+		*dflags |= GPIOD_OUT_LOW;
+	else if (fwnode_property_present(fwnode, "output-high"))
+		*dflags |= GPIOD_OUT_HIGH;
+	else
+		return ERR_PTR(-EINVAL);
+
+	fwnode_property_read_string(fwnode, "line-name", name);
+
+	return desc;
+}
+
+static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct fwnode_handle *fwnode;
+
+	device_for_each_child_node(chip->parent, fwnode) {
+		unsigned int lflags, dflags;
+		struct gpio_desc *desc;
+		const char *name;
+		int ret;
+
+		if (!fwnode_property_present(fwnode, "gpio-hog"))
+			continue;
+
+		desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
+						    &lflags, &dflags);
+		if (IS_ERR(desc))
+			continue;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret) {
+			dev_err(chip->parent, "Failed to hog GPIO\n");
+			fwnode_handle_put(fwnode);
+			return;
+		}
+	}
+}
+
 void acpi_gpiochip_add(struct gpio_chip *chip)
 {
 	struct acpi_gpio_chip *acpi_gpio;
@@ -889,7 +961,11 @@ void acpi_gpiochip_add(struct gpio_chip *chip)
 		return;
 	}
 
+	if (!chip->names)
+		devprop_gpiochip_set_names(chip);
+
 	acpi_gpiochip_request_regions(acpi_gpio);
+	acpi_gpiochip_scan_gpios(acpi_gpio);
 	acpi_walk_dep_device_list(handle);
 }
 
@@ -918,18 +994,27 @@ void acpi_gpiochip_remove(struct gpio_chip *chip)
 	kfree(acpi_gpio);
 }
 
-static unsigned int acpi_gpio_package_count(const union acpi_object *obj)
+static int acpi_gpio_package_count(const union acpi_object *obj)
 {
 	const union acpi_object *element = obj->package.elements;
 	const union acpi_object *end = element + obj->package.count;
 	unsigned int count = 0;
 
 	while (element < end) {
-		if (element->type == ACPI_TYPE_LOCAL_REFERENCE)
+		switch (element->type) {
+		case ACPI_TYPE_LOCAL_REFERENCE:
+			element += 3;
+			/* Fallthrough */
+		case ACPI_TYPE_INTEGER:
+			element++;
 			count++;
+			break;
 
-		element++;
+		default:
+			return -EPROTO;
+		}
 	}
+
 	return count;
 }
 
diff --git a/drivers/gpio/gpiolib-devprop.c b/drivers/gpio/gpiolib-devprop.c
new file mode 100644
index 000000000000..27f383bda7d9
--- /dev/null
+++ b/drivers/gpio/gpiolib-devprop.c
@@ -0,0 +1,67 @@
+/*
+ * Device property helpers for GPIO chips.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+
+#include "gpiolib.h"
+
+/**
+ * devprop_gpiochip_set_names - Set GPIO line names using device properties
+ * @chip: GPIO chip whose lines should be named, if possible
+ *
+ * Looks for device property "gpio-line-names" and if it exists assigns
+ * GPIO line names for the chip. The memory allocated for the assigned
+ * names belong to the underlying firmware node and should not be released
+ * by the caller.
+ */
+void devprop_gpiochip_set_names(struct gpio_chip *chip)
+{
+	struct gpio_device *gdev = chip->gpiodev;
+	const char **names;
+	int ret, i;
+
+	if (!chip->parent) {
+		dev_warn(&gdev->dev, "GPIO chip parent is NULL\n");
+		return;
+	}
+
+	ret = device_property_read_string_array(chip->parent, "gpio-line-names",
+						NULL, 0);
+	if (ret < 0)
+		return;
+
+	if (ret != gdev->ngpio) {
+		dev_warn(chip->parent,
+			 "names %d do not match number of GPIOs %d\n", ret,
+			 gdev->ngpio);
+		return;
+	}
+
+	names = kcalloc(gdev->ngpio, sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return;
+
+	ret = device_property_read_string_array(chip->parent, "gpio-line-names",
+						names, gdev->ngpio);
+	if (ret < 0) {
+		dev_warn(chip->parent, "failed to read GPIO line names\n");
+		kfree(names);
+		return;
+	}
+
+	for (i = 0; i < gdev->ngpio; i++)
+		gdev->descs[i].name = names[i];
+
+	kfree(names);
+}
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 193f15d50bba..92b185f19232 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -226,51 +226,6 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
 }
 
 /**
- * of_gpiochip_set_names() - set up the names of the lines
- * @chip: GPIO chip whose lines should be named, if possible
- */
-static void of_gpiochip_set_names(struct gpio_chip *gc)
-{
-	struct gpio_device *gdev = gc->gpiodev;
-	struct device_node *np = gc->of_node;
-	int i;
-	int nstrings;
-
-	nstrings = of_property_count_strings(np, "gpio-line-names");
-	if (nstrings <= 0)
-		/* Lines names not present */
-		return;
-
-	/* This is normally not what you want */
-	if (gdev->ngpio != nstrings)
-		dev_info(&gdev->dev, "gpio-line-names specifies %d line "
-			 "names but there are %d lines on the chip\n",
-			 nstrings, gdev->ngpio);
-
-	/*
-	 * Make sure to not index beyond the end of the number of descriptors
-	 * of the GPIO device.
-	 */
-	for (i = 0; i < gdev->ngpio; i++) {
-		const char *name;
-		int ret;
-
-		ret = of_property_read_string_index(np,
-						    "gpio-line-names",
-						    i,
-						    &name);
-		if (ret) {
-			if (ret != -ENODATA)
-                                dev_err(&gdev->dev,
-                                        "unable to name line %d: %d\n",
-                                        i, ret);
-			break;
-		}
-		gdev->descs[i].name = name;
-	}
-}
-
-/**
  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
  * @chip:	gpio chip to act on
  *
@@ -296,8 +251,10 @@ static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
 			continue;
 
 		ret = gpiod_hog(desc, name, lflags, dflags);
-		if (ret < 0)
+		if (ret < 0) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	return 0;
@@ -526,7 +483,7 @@ int of_gpiochip_add(struct gpio_chip *chip)
 
 	/* If the chip defines names itself, these take precedence */
 	if (!chip->names)
-		of_gpiochip_set_names(chip);
+		devprop_gpiochip_set_names(chip);
 
 	of_node_get(chip->of_node);
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 868128a676ba..f4c26c7826cd 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -986,7 +986,8 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
 		return -ENODEV;
 	get_device(&gdev->dev);
 	filp->private_data = gdev;
-	return 0;
+
+	return nonseekable_open(inode, filp);
 }
 
 /**
@@ -1011,7 +1012,7 @@ static const struct file_operations gpio_fileops = {
 	.release = gpio_chrdev_release,
 	.open = gpio_chrdev_open,
 	.owner = THIS_MODULE,
-	.llseek = noop_llseek,
+	.llseek = no_llseek,
 	.unlocked_ioctl = gpio_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = gpio_ioctl_compat,
@@ -1512,7 +1513,7 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
 }
 
 /**
- * gpiochip_set_chained_irqchip() - sets a chained irqchip to a gpiochip
+ * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
  * @gpiochip: the gpiochip to set the irqchip chain to
  * @irqchip: the irqchip to chain to the gpiochip
  * @parent_irq: the irq number corresponding to the parent IRQ for this
@@ -1521,10 +1522,10 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
  * coming out of the gpiochip. If the interrupt is nested rather than
  * cascaded, pass NULL in this handler argument
  */
-void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
-				  struct irq_chip *irqchip,
-				  int parent_irq,
-				  irq_flow_handler_t parent_handler)
+static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
+					  struct irq_chip *irqchip,
+					  int parent_irq,
+					  irq_flow_handler_t parent_handler)
 {
 	unsigned int offset;
 
@@ -1548,7 +1549,7 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 		irq_set_chained_handler_and_data(parent_irq, parent_handler,
 						 gpiochip);
 
-		gpiochip->irq_parent = parent_irq;
+		gpiochip->irq_chained_parent = parent_irq;
 	}
 
 	/* Set the parent IRQ for all affected IRQs */
@@ -1559,9 +1560,48 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 			       parent_irq);
 	}
 }
+
+/**
+ * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip
+ * @gpiochip: the gpiochip to set the irqchip chain to
+ * @irqchip: the irqchip to chain to the gpiochip
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * chained irqchip
+ * @parent_handler: the parent interrupt handler for the accumulated IRQ
+ * coming out of the gpiochip. If the interrupt is nested rather than
+ * cascaded, pass NULL in this handler argument
+ */
+void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
+				  struct irq_chip *irqchip,
+				  int parent_irq,
+				  irq_flow_handler_t parent_handler)
+{
+	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
+				      parent_handler);
+}
 EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
 
 /**
+ * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
+ * @gpiochip: the gpiochip to set the irqchip nested handler to
+ * @irqchip: the irqchip to nest to the gpiochip
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * nested irqchip
+ */
+void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+				 struct irq_chip *irqchip,
+				 int parent_irq)
+{
+	if (!gpiochip->irq_nested) {
+		chip_err(gpiochip, "tried to nest a chained gpiochip\n");
+		return;
+	}
+	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
+				      NULL);
+}
+EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
+
+/**
  * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
  * @d: the irqdomain used by this irqchip
  * @irq: the global irq number used by this GPIO irqchip irq
@@ -1583,8 +1623,8 @@ static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 	 */
 	irq_set_lockdep_class(irq, chip->lock_key);
 	irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler);
-	/* Chips that can sleep need nested thread handlers */
-	if (chip->can_sleep && !chip->irq_not_threaded)
+	/* Chips that use nested thread handlers have them marked */
+	if (chip->irq_nested)
 		irq_set_nested_thread(irq, 1);
 	irq_set_noprobe(irq);
 
@@ -1602,7 +1642,7 @@ static void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
 {
 	struct gpio_chip *chip = d->host_data;
 
-	if (chip->can_sleep)
+	if (chip->irq_nested)
 		irq_set_nested_thread(irq, 0);
 	irq_set_chip_and_handler(irq, NULL, NULL);
 	irq_set_chip_data(irq, NULL);
@@ -1657,9 +1697,9 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 
 	acpi_gpiochip_free_interrupts(gpiochip);
 
-	if (gpiochip->irq_parent) {
-		irq_set_chained_handler(gpiochip->irq_parent, NULL);
-		irq_set_handler_data(gpiochip->irq_parent, NULL);
+	if (gpiochip->irq_chained_parent) {
+		irq_set_chained_handler(gpiochip->irq_chained_parent, NULL);
+		irq_set_handler_data(gpiochip->irq_chained_parent, NULL);
 	}
 
 	/* Remove all IRQ mappings and delete the domain */
@@ -1683,7 +1723,7 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 }
 
 /**
- * gpiochip_irqchip_add() - adds an irqchip to a gpiochip
+ * _gpiochip_irqchip_add() - adds an irqchip to a gpiochip
  * @gpiochip: the gpiochip to add the irqchip to
  * @irqchip: the irqchip to add to the gpiochip
  * @first_irq: if not dynamically assigned, the base (first) IRQ to
@@ -1691,6 +1731,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
  * @handler: the irq handler to use (often a predefined irq core function)
  * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
  * to have the core avoid setting up any default type in the hardware.
+ * @nested: whether this is a nested irqchip calling handle_nested_irq()
+ * in its IRQ handler
  * @lock_key: lockdep class
  *
  * This function closely associates a certain irqchip with a certain
@@ -1712,6 +1754,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
 			  unsigned int type,
+			  bool nested,
 			  struct lock_class_key *lock_key)
 {
 	struct device_node *of_node;
@@ -1726,6 +1769,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 		pr_err("missing gpiochip .dev parent pointer\n");
 		return -EINVAL;
 	}
+	gpiochip->irq_nested = nested;
 	of_node = gpiochip->parent->of_node;
 #ifdef CONFIG_OF_GPIO
 	/*
@@ -2223,6 +2267,7 @@ EXPORT_SYMBOL_GPL(gpiod_direction_input);
 static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
+	int val = !!value;
 	int ret;
 
 	/* GPIOs used for IRQs shall not be set as output */
@@ -2242,7 +2287,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 				goto set_output_value;
 		}
 		/* Emulate open drain by not actively driving the line high */
-		if (value)
+		if (val)
 			return gpiod_direction_input(desc);
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
@@ -2253,7 +2298,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 				goto set_output_value;
 		}
 		/* Emulate open source by not actively driving the line low */
-		if (!value)
+		if (!val)
 			return gpiod_direction_input(desc);
 	} else {
 		/* Make sure to disable open drain/source hardware, if any */
@@ -2271,10 +2316,10 @@ set_output_value:
 		return -EIO;
 	}
 
-	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), value);
+	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
 	if (!ret)
 		set_bit(FLAG_IS_OUT, &desc->flags);
-	trace_gpio_value(desc_to_gpio(desc), 0, value);
+	trace_gpio_value(desc_to_gpio(desc), 0, val);
 	trace_gpio_direction(desc_to_gpio(desc), 0, ret);
 	return ret;
 }
@@ -2314,6 +2359,8 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 	VALIDATE_DESC(desc);
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
+	else
+		value = !!value;
 	return _gpiod_direction_output_raw(desc, value);
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
@@ -2758,6 +2805,15 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 	}
 
 	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
+
+	/*
+	 * If the consumer has not set up a label (such as when the
+	 * IRQ is referenced from .to_irq()) we set up a label here
+	 * so it is clear this is used as an interrupt.
+	 */
+	if (!desc->label)
+		desc_set_label(desc, "interrupt");
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
@@ -2772,10 +2828,17 @@ EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
  */
 void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	struct gpio_desc *desc;
+
+	desc = gpiochip_get_desc(chip, offset);
+	if (IS_ERR(desc))
 		return;
 
-	clear_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
+	clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
+
+	/* If we only had this marking, erase it */
+	if (desc->label && !strcmp(desc->label, "interrupt"))
+		desc_set_label(desc, NULL);
 }
 EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
 
@@ -3170,7 +3233,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 	/* Process flags */
 	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
 		status = gpiod_direction_output(desc,
-					      dflags & GPIOD_FLAGS_BIT_DIR_VAL);
+				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
 	else
 		status = gpiod_direction_input(desc);
 
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 346fbda39220..d10eaf520860 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -209,6 +209,8 @@ static int __maybe_unused gpio_chip_hwgpio(const struct gpio_desc *desc)
 	return desc - &desc->gdev->descs[0];
 }
 
+void devprop_gpiochip_set_names(struct gpio_chip *chip);
+
 /* With descriptor prefix */
 
 #define gpiod_emerg(desc, fmt, ...)					       \
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 0e75d94972ba..801fa8bb05e1 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -164,6 +164,20 @@ config PINCTRL_SIRF
 	select GENERIC_PINCONF
 	select GPIOLIB_IRQCHIP
 
+config PINCTRL_SX150X
+	bool "Semtech SX150x I2C GPIO expander pinctrl driver"
+	depends on GPIOLIB && I2C=y
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to provide support for Semtech SX150x-series I2C
+	  GPIO expanders as pinctrl module.
+	  Compatible models include:
+	  - 8 bits:  sx1508q, sx1502q
+	  - 16 bits: sx1509q, sx1506q
+
 config PINCTRL_PISTACHIO
 	def_bool y if MACH_PISTACHIO
 	depends on GPIOLIB
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 11bad373dfe0..3b8e6f726acb 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
+obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
 obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
new file mode 100644
index 000000000000..d2d4211e615e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -0,0 +1,1062 @@
+/*
+ * Copyright (c) 2016, BayLibre, SAS. All rights reserved.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Driver for Semtech SX150X I2C GPIO Expanders
+ *
+ * Author: Gregory Bean <gbean@codeaurora.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+/* The chip models of sx150x */
+enum {
+	SX150X_123 = 0,
+	SX150X_456,
+	SX150X_789,
+};
+
+struct sx150x_123_pri {
+	u8 reg_pld_mode;
+	u8 reg_pld_table0;
+	u8 reg_pld_table1;
+	u8 reg_pld_table2;
+	u8 reg_pld_table3;
+	u8 reg_pld_table4;
+	u8 reg_advance;
+};
+
+struct sx150x_456_pri {
+	u8 reg_pld_mode;
+	u8 reg_pld_table0;
+	u8 reg_pld_table1;
+	u8 reg_pld_table2;
+	u8 reg_pld_table3;
+	u8 reg_pld_table4;
+	u8 reg_advance;
+};
+
+struct sx150x_789_pri {
+	u8 reg_drain;
+	u8 reg_polarity;
+	u8 reg_clock;
+	u8 reg_misc;
+	u8 reg_reset;
+	u8 ngpios;
+};
+
+struct sx150x_device_data {
+	u8 model;
+	u8 reg_pullup;
+	u8 reg_pulldn;
+	u8 reg_dir;
+	u8 reg_data;
+	u8 reg_irq_mask;
+	u8 reg_irq_src;
+	u8 reg_sense;
+	u8 ngpios;
+	union {
+		struct sx150x_123_pri x123;
+		struct sx150x_456_pri x456;
+		struct sx150x_789_pri x789;
+	} pri;
+	const struct pinctrl_pin_desc *pins;
+	unsigned int npins;
+};
+
+struct sx150x_pinctrl {
+	struct device *dev;
+	struct i2c_client *client;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_desc pinctrl_desc;
+	struct gpio_chip gpio;
+	struct irq_chip irq_chip;
+	struct {
+		int update;
+		u32 sense;
+		u32 masked;
+		u32 dev_sense;
+		u32 dev_masked;
+	} irq;
+	struct mutex lock;
+	const struct sx150x_device_data *data;
+};
+
+static const struct pinctrl_pin_desc sx150x_8_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "oscio"),
+};
+
+static const struct pinctrl_pin_desc sx150x_16_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+	PINCTRL_PIN(15, "gpio15"),
+	PINCTRL_PIN(16, "oscio"),
+};
+
+static const struct sx150x_device_data sx1508q_device_data = {
+	.model = SX150X_789,
+	.reg_pullup	= 0x03,
+	.reg_pulldn	= 0x04,
+	.reg_dir	= 0x07,
+	.reg_data	= 0x08,
+	.reg_irq_mask	= 0x09,
+	.reg_irq_src	= 0x0c,
+	.reg_sense	= 0x0b,
+	.pri.x789 = {
+		.reg_drain	= 0x05,
+		.reg_polarity	= 0x06,
+		.reg_clock	= 0x0f,
+		.reg_misc	= 0x10,
+		.reg_reset	= 0x7d,
+	},
+	.ngpios = 8,
+	.pins = sx150x_8_pins,
+	.npins = ARRAY_SIZE(sx150x_8_pins),
+};
+
+static const struct sx150x_device_data sx1509q_device_data = {
+	.model = SX150X_789,
+	.reg_pullup	= 0x07,
+	.reg_pulldn	= 0x09,
+	.reg_dir	= 0x0f,
+	.reg_data	= 0x11,
+	.reg_irq_mask	= 0x13,
+	.reg_irq_src	= 0x19,
+	.reg_sense	= 0x17,
+	.pri.x789 = {
+		.reg_drain	= 0x0b,
+		.reg_polarity	= 0x0d,
+		.reg_clock	= 0x1e,
+		.reg_misc	= 0x1f,
+		.reg_reset	= 0x7d,
+	},
+	.ngpios	= 16,
+	.pins = sx150x_16_pins,
+	.npins = ARRAY_SIZE(sx150x_16_pins),
+};
+
+static const struct sx150x_device_data sx1506q_device_data = {
+	.model = SX150X_456,
+	.reg_pullup	= 0x05,
+	.reg_pulldn	= 0x07,
+	.reg_dir	= 0x03,
+	.reg_data	= 0x01,
+	.reg_irq_mask	= 0x09,
+	.reg_irq_src	= 0x0f,
+	.reg_sense	= 0x0d,
+	.pri.x456 = {
+		.reg_pld_mode	= 0x21,
+		.reg_pld_table0	= 0x23,
+		.reg_pld_table1	= 0x25,
+		.reg_pld_table2	= 0x27,
+		.reg_pld_table3	= 0x29,
+		.reg_pld_table4	= 0x2b,
+		.reg_advance	= 0xad,
+	},
+	.ngpios	= 16,
+	.pins = sx150x_16_pins,
+	.npins = 16, /* oscio not available */
+};
+
+static const struct sx150x_device_data sx1502q_device_data = {
+	.model = SX150X_123,
+	.reg_pullup	= 0x02,
+	.reg_pulldn	= 0x03,
+	.reg_dir	= 0x01,
+	.reg_data	= 0x00,
+	.reg_irq_mask	= 0x05,
+	.reg_irq_src	= 0x08,
+	.reg_sense	= 0x07,
+	.pri.x123 = {
+		.reg_pld_mode	= 0x10,
+		.reg_pld_table0	= 0x11,
+		.reg_pld_table1	= 0x12,
+		.reg_pld_table2	= 0x13,
+		.reg_pld_table3	= 0x14,
+		.reg_pld_table4	= 0x15,
+		.reg_advance	= 0xad,
+	},
+	.ngpios	= 8,
+	.pins = sx150x_8_pins,
+	.npins = 8, /* oscio not available */
+};
+
+static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	s32 err = i2c_smbus_write_byte_data(client, reg, val);
+
+	if (err < 0)
+		dev_warn(&client->dev,
+			"i2c write fail: can't write %02x to %02x: %d\n",
+			val, reg, err);
+	return err;
+}
+
+static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+	s32 err = i2c_smbus_read_byte_data(client, reg);
+
+	if (err >= 0)
+		*val = err;
+	else
+		dev_warn(&client->dev,
+			"i2c read fail: can't read from %02x: %d\n",
+			reg, err);
+	return err;
+}
+
+/*
+ * These utility functions solve the common problem of locating and setting
+ * configuration bits.  Configuration bits are grouped into registers
+ * whose indexes increase downwards.  For example, with eight-bit registers,
+ * sixteen gpios would have their config bits grouped in the following order:
+ * REGISTER N-1 [ f e d c b a 9 8 ]
+ *          N   [ 7 6 5 4 3 2 1 0 ]
+ *
+ * For multi-bit configurations, the pattern gets wider:
+ * REGISTER N-3 [ f f e e d d c c ]
+ *          N-2 [ b b a a 9 9 8 8 ]
+ *          N-1 [ 7 7 6 6 5 5 4 4 ]
+ *          N   [ 3 3 2 2 1 1 0 0 ]
+ *
+ * Given the address of the starting register 'N', the index of the gpio
+ * whose configuration we seek to change, and the width in bits of that
+ * configuration, these functions allow us to locate the correct
+ * register and mask the correct bits.
+ */
+static inline void sx150x_find_cfg(u8 offset, u8 width,
+				   u8 *reg, u8 *mask, u8 *shift)
+{
+	*reg   -= offset * width / 8;
+	*mask   = (1 << width) - 1;
+	*shift  = (offset * width) % 8;
+	*mask <<= *shift;
+}
+
+static int sx150x_write_cfg(struct i2c_client *client,
+			    u8 offset, u8 width, u8 reg, u8 val)
+{
+	u8  mask;
+	u8  data;
+	u8  shift;
+	int err;
+
+	sx150x_find_cfg(offset, width, &reg, &mask, &shift);
+	err = sx150x_i2c_read(client, reg, &data);
+	if (err < 0)
+		return err;
+
+	data &= ~mask;
+	data |= (val << shift) & mask;
+	return sx150x_i2c_write(client, reg, data);
+}
+
+static int sx150x_read_cfg(struct i2c_client *client,
+			   u8 offset, u8 width, u8 reg)
+{
+	u8  mask;
+	u8  data;
+	u8  shift;
+	int err;
+
+	sx150x_find_cfg(offset, width, &reg, &mask, &shift);
+	err = sx150x_i2c_read(client, reg, &data);
+	if (err < 0)
+		return err;
+
+	return (data & mask);
+}
+
+static int sx150x_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 0;
+}
+
+static const char *sx150x_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						unsigned int group)
+{
+	return NULL;
+}
+
+static int sx150x_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					unsigned int group,
+					const unsigned int **pins,
+					unsigned int *num_pins)
+{
+	return -ENOTSUPP;
+}
+
+static const struct pinctrl_ops sx150x_pinctrl_ops = {
+	.get_groups_count = sx150x_pinctrl_get_groups_count,
+	.get_group_name = sx150x_pinctrl_get_group_name,
+	.get_group_pins = sx150x_pinctrl_get_group_pins,
+#ifdef CONFIG_OF
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+#endif
+};
+
+static bool sx150x_pin_is_oscio(struct sx150x_pinctrl *pctl, unsigned int pin)
+{
+	if (pin >= pctl->data->npins)
+		return false;
+
+	/* OSCIO pin is only present in 789 devices */
+	if (pctl->data->model != SX150X_789)
+		return false;
+
+	return !strcmp(pctl->data->pins[pin].name, "oscio");
+}
+
+static int sx150x_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+	int status;
+
+	if (sx150x_pin_is_oscio(pctl, offset))
+		return false;
+
+	status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_dir);
+	if (status >= 0)
+		status = !!status;
+
+	return status;
+}
+
+static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+	int status;
+
+	if (sx150x_pin_is_oscio(pctl, offset))
+		return -EINVAL;
+
+	status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_data);
+	if (status >= 0)
+		status = !!status;
+
+	return status;
+}
+
+static int sx150x_gpio_set_single_ended(struct gpio_chip *chip,
+					unsigned int offset,
+					enum single_ended_mode mode)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+	int ret;
+
+	switch (mode) {
+	case LINE_MODE_PUSH_PULL:
+		if (pctl->data->model != SX150X_789 ||
+		    sx150x_pin_is_oscio(pctl, offset))
+			return 0;
+
+		mutex_lock(&pctl->lock);
+		ret = sx150x_write_cfg(pctl->client, offset, 1,
+				       pctl->data->pri.x789.reg_drain,
+				       0);
+		mutex_unlock(&pctl->lock);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case LINE_MODE_OPEN_DRAIN:
+		if (pctl->data->model != SX150X_789 ||
+		    sx150x_pin_is_oscio(pctl, offset))
+			return -ENOTSUPP;
+
+		mutex_lock(&pctl->lock);
+		ret = sx150x_write_cfg(pctl->client, offset, 1,
+				       pctl->data->pri.x789.reg_drain,
+				       1);
+		mutex_unlock(&pctl->lock);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void sx150x_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			       int value)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+
+	if (sx150x_pin_is_oscio(pctl, offset)) {
+
+		mutex_lock(&pctl->lock);
+		sx150x_i2c_write(pctl->client,
+				       pctl->data->pri.x789.reg_clock,
+				       (value ? 0x1f : 0x10));
+		mutex_unlock(&pctl->lock);
+	} else {
+		mutex_lock(&pctl->lock);
+		sx150x_write_cfg(pctl->client, offset, 1,
+				       pctl->data->reg_data,
+				       (value ? 1 : 0));
+		mutex_unlock(&pctl->lock);
+	}
+}
+
+static int sx150x_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+	int ret;
+
+	if (sx150x_pin_is_oscio(pctl, offset))
+		return -EINVAL;
+
+	mutex_lock(&pctl->lock);
+	ret = sx150x_write_cfg(pctl->client, offset, 1,
+				pctl->data->reg_dir, 1);
+	mutex_unlock(&pctl->lock);
+
+	return ret;
+}
+
+static int sx150x_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
+	int status;
+
+	if (sx150x_pin_is_oscio(pctl, offset)) {
+		sx150x_gpio_set(chip, offset, value);
+		return 0;
+	}
+
+	mutex_lock(&pctl->lock);
+	status = sx150x_write_cfg(pctl->client, offset, 1,
+				  pctl->data->reg_data,
+				  (value ? 1 : 0));
+	if (status >= 0)
+		status = sx150x_write_cfg(pctl->client, offset, 1,
+					  pctl->data->reg_dir, 0);
+	mutex_unlock(&pctl->lock);
+
+	return status;
+}
+
+static void sx150x_irq_mask(struct irq_data *d)
+{
+	struct sx150x_pinctrl *pctl =
+			gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	unsigned int n = d->hwirq;
+
+	pctl->irq.masked |= (1 << n);
+	pctl->irq.update = n;
+}
+
+static void sx150x_irq_unmask(struct irq_data *d)
+{
+	struct sx150x_pinctrl *pctl =
+			gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	unsigned int n = d->hwirq;
+
+	pctl->irq.masked &= ~(1 << n);
+	pctl->irq.update = n;
+}
+
+static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct sx150x_pinctrl *pctl =
+			gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	unsigned int n, val = 0;
+
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		return -EINVAL;
+
+	n = d->hwirq;
+
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		val |= 0x1;
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		val |= 0x2;
+
+	pctl->irq.sense &= ~(3UL << (n * 2));
+	pctl->irq.sense |= val << (n * 2);
+	pctl->irq.update = n;
+	return 0;
+}
+
+static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
+{
+	struct sx150x_pinctrl *pctl = (struct sx150x_pinctrl *)dev_id;
+	unsigned int nhandled = 0;
+	unsigned int sub_irq;
+	unsigned int n;
+	s32 err;
+	u8 val;
+	int i;
+
+	for (i = (pctl->data->ngpios / 8) - 1; i >= 0; --i) {
+		err = sx150x_i2c_read(pctl->client,
+				      pctl->data->reg_irq_src - i,
+				      &val);
+		if (err < 0)
+			continue;
+
+		err = sx150x_i2c_write(pctl->client,
+				       pctl->data->reg_irq_src - i,
+				       val);
+		if (err < 0)
+			continue;
+
+		for (n = 0; n < 8; ++n) {
+			if (val & (1 << n)) {
+				sub_irq = irq_find_mapping(
+						pctl->gpio.irqdomain,
+						(i * 8) + n);
+				handle_nested_irq(sub_irq);
+				++nhandled;
+			}
+		}
+	}
+
+	return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
+}
+
+static void sx150x_irq_bus_lock(struct irq_data *d)
+{
+	struct sx150x_pinctrl *pctl =
+			gpiochip_get_data(irq_data_get_irq_chip_data(d));
+
+	mutex_lock(&pctl->lock);
+}
+
+static void sx150x_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct sx150x_pinctrl *pctl =
+			gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	unsigned int n;
+
+	if (pctl->irq.update < 0)
+		goto out;
+
+	n = pctl->irq.update;
+	pctl->irq.update = -1;
+
+	/* Avoid updates if nothing changed */
+	if (pctl->irq.dev_sense == pctl->irq.sense &&
+	    pctl->irq.dev_masked == pctl->irq.masked)
+		goto out;
+
+	pctl->irq.dev_sense = pctl->irq.sense;
+	pctl->irq.dev_masked = pctl->irq.masked;
+
+	if (pctl->irq.masked & (1 << n)) {
+		sx150x_write_cfg(pctl->client, n, 1,
+				 pctl->data->reg_irq_mask, 1);
+		sx150x_write_cfg(pctl->client, n, 2,
+				 pctl->data->reg_sense, 0);
+	} else {
+		sx150x_write_cfg(pctl->client, n, 1,
+				 pctl->data->reg_irq_mask, 0);
+		sx150x_write_cfg(pctl->client, n, 2,
+				 pctl->data->reg_sense,
+				 pctl->irq.sense >> (n * 2));
+	}
+out:
+	mutex_unlock(&pctl->lock);
+}
+
+static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+			      unsigned long *config)
+{
+	struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int param = pinconf_to_config_param(*config);
+	int ret;
+	u32 arg;
+
+	if (sx150x_pin_is_oscio(pctl, pin)) {
+		u8 data;
+
+		switch (param) {
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+		case PIN_CONFIG_OUTPUT:
+			mutex_lock(&pctl->lock);
+			ret = sx150x_i2c_read(pctl->client,
+					pctl->data->pri.x789.reg_clock,
+					&data);
+			mutex_unlock(&pctl->lock);
+
+			if (ret < 0)
+				return ret;
+
+			if (param == PIN_CONFIG_DRIVE_PUSH_PULL)
+				arg = (data & 0x1f) ? 1 : 0;
+			else {
+				if ((data & 0x1f) == 0x1f)
+					arg = 1;
+				else if ((data & 0x1f) == 0x10)
+					arg = 0;
+				else
+					return -EINVAL;
+			}
+
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+
+		goto out;
+	}
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		mutex_lock(&pctl->lock);
+		ret = sx150x_read_cfg(pctl->client, pin, 1,
+				      pctl->data->reg_pulldn);
+		mutex_unlock(&pctl->lock);
+
+		if (ret < 0)
+			return ret;
+
+		if (!ret)
+			return -EINVAL;
+
+		arg = 1;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		mutex_lock(&pctl->lock);
+		ret = sx150x_read_cfg(pctl->client, pin, 1,
+				      pctl->data->reg_pullup);
+		mutex_unlock(&pctl->lock);
+
+		if (ret < 0)
+			return ret;
+
+		if (!ret)
+			return -EINVAL;
+
+		arg = 1;
+		break;
+
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		if (pctl->data->model != SX150X_789)
+			return -ENOTSUPP;
+
+		mutex_lock(&pctl->lock);
+		ret = sx150x_read_cfg(pctl->client, pin, 1,
+				      pctl->data->pri.x789.reg_drain);
+		mutex_unlock(&pctl->lock);
+
+		if (ret < 0)
+			return ret;
+
+		if (!ret)
+			return -EINVAL;
+
+		arg = 1;
+		break;
+
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		if (pctl->data->model != SX150X_789)
+			arg = true;
+		else {
+			mutex_lock(&pctl->lock);
+			ret = sx150x_read_cfg(pctl->client, pin, 1,
+					      pctl->data->pri.x789.reg_drain);
+			mutex_unlock(&pctl->lock);
+
+			if (ret < 0)
+				return ret;
+
+			if (ret)
+				return -EINVAL;
+
+			arg = 1;
+		}
+		break;
+
+	case PIN_CONFIG_OUTPUT:
+		ret = sx150x_gpio_get_direction(&pctl->gpio, pin);
+		if (ret < 0)
+			return ret;
+
+		if (ret)
+			return -EINVAL;
+
+		ret = sx150x_gpio_get(&pctl->gpio, pin);
+		if (ret < 0)
+			return ret;
+
+		arg = ret;
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+out:
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int sx150x_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+			      unsigned long *configs, unsigned int num_configs)
+{
+	struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 arg;
+	int i;
+	int ret;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		if (sx150x_pin_is_oscio(pctl, pin)) {
+			if (param == PIN_CONFIG_OUTPUT) {
+				ret = sx150x_gpio_direction_output(&pctl->gpio,
+								   pin, arg);
+				if (ret < 0)
+					return ret;
+
+				continue;
+			} else
+				return -ENOTSUPP;
+		}
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+		case PIN_CONFIG_BIAS_DISABLE:
+			mutex_lock(&pctl->lock);
+			ret = sx150x_write_cfg(pctl->client, pin, 1,
+					       pctl->data->reg_pulldn, 0);
+			mutex_unlock(&pctl->lock);
+			if (ret < 0)
+				return ret;
+
+			mutex_lock(&pctl->lock);
+			ret = sx150x_write_cfg(pctl->client, pin, 1,
+					       pctl->data->reg_pullup, 0);
+			mutex_unlock(&pctl->lock);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			mutex_lock(&pctl->lock);
+			ret = sx150x_write_cfg(pctl->client, pin, 1,
+					       pctl->data->reg_pullup,
+					       1);
+			mutex_unlock(&pctl->lock);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			mutex_lock(&pctl->lock);
+			ret = sx150x_write_cfg(pctl->client, pin, 1,
+					       pctl->data->reg_pulldn,
+					       1);
+			mutex_unlock(&pctl->lock);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+			ret = sx150x_gpio_set_single_ended(&pctl->gpio,
+						pin, LINE_MODE_OPEN_DRAIN);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+			ret = sx150x_gpio_set_single_ended(&pctl->gpio,
+						pin, LINE_MODE_PUSH_PULL);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		case PIN_CONFIG_OUTPUT:
+			ret = sx150x_gpio_direction_output(&pctl->gpio,
+							   pin, arg);
+			if (ret < 0)
+				return ret;
+
+			break;
+
+		default:
+			return -ENOTSUPP;
+		}
+	} /* for each config */
+
+	return 0;
+}
+
+static const struct pinconf_ops sx150x_pinconf_ops = {
+	.pin_config_get = sx150x_pinconf_get,
+	.pin_config_set = sx150x_pinconf_set,
+	.is_generic = true,
+};
+
+static const struct i2c_device_id sx150x_id[] = {
+	{"sx1508q", (kernel_ulong_t) &sx1508q_device_data },
+	{"sx1509q", (kernel_ulong_t) &sx1509q_device_data },
+	{"sx1506q", (kernel_ulong_t) &sx1506q_device_data },
+	{"sx1502q", (kernel_ulong_t) &sx1502q_device_data },
+	{}
+};
+
+static const struct of_device_id sx150x_of_match[] = {
+	{ .compatible = "semtech,sx1508q" },
+	{ .compatible = "semtech,sx1509q" },
+	{ .compatible = "semtech,sx1506q" },
+	{ .compatible = "semtech,sx1502q" },
+	{},
+};
+
+static int sx150x_init_io(struct sx150x_pinctrl *pctl, u8 base, u16 cfg)
+{
+	int err = 0;
+	unsigned int n;
+
+	for (n = 0; err >= 0 && n < (pctl->data->ngpios / 8); ++n)
+		err = sx150x_i2c_write(pctl->client, base - n, cfg >> (n * 8));
+	return err;
+}
+
+static int sx150x_reset(struct sx150x_pinctrl *pctl)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(pctl->client,
+					pctl->data->pri.x789.reg_reset,
+					0x12);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(pctl->client,
+					pctl->data->pri.x789.reg_reset,
+					0x34);
+	return err;
+}
+
+static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
+{
+	int err;
+
+	if (pctl->data->model == SX150X_789 &&
+	    of_property_read_bool(pctl->dev->of_node, "semtech,probe-reset")) {
+		err = sx150x_reset(pctl);
+		if (err < 0)
+			return err;
+	}
+
+	if (pctl->data->model == SX150X_789)
+		err = sx150x_i2c_write(pctl->client,
+				pctl->data->pri.x789.reg_misc,
+				0x01);
+	else if (pctl->data->model == SX150X_456)
+		err = sx150x_i2c_write(pctl->client,
+				pctl->data->pri.x456.reg_advance,
+				0x04);
+	else
+		err = sx150x_i2c_write(pctl->client,
+				pctl->data->pri.x123.reg_advance,
+				0x00);
+	if (err < 0)
+		return err;
+
+	/* Set all pins to work in normal mode */
+	if (pctl->data->model == SX150X_789) {
+		err = sx150x_init_io(pctl,
+				pctl->data->pri.x789.reg_polarity,
+				0);
+		if (err < 0)
+			return err;
+	} else if (pctl->data->model == SX150X_456) {
+		/* Set all pins to work in normal mode */
+		err = sx150x_init_io(pctl,
+				pctl->data->pri.x456.reg_pld_mode,
+				0);
+		if (err < 0)
+			return err;
+	} else {
+		/* Set all pins to work in normal mode */
+		err = sx150x_init_io(pctl,
+				pctl->data->pri.x123.reg_pld_mode,
+				0);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int sx150x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WRITE_WORD_DATA;
+	struct device *dev = &client->dev;
+	struct sx150x_pinctrl *pctl;
+	int ret;
+
+	if (!id->driver_data)
+		return -EINVAL;
+
+	if (!i2c_check_functionality(client->adapter, i2c_funcs))
+		return -ENOSYS;
+
+	pctl = devm_kzalloc(dev, sizeof(*pctl), GFP_KERNEL);
+	if (!pctl)
+		return -ENOMEM;
+
+	pctl->dev = dev;
+	pctl->client = client;
+	pctl->data = (void *)id->driver_data;
+
+	mutex_init(&pctl->lock);
+
+	ret = sx150x_init_hw(pctl);
+	if (ret)
+		return ret;
+
+	/* Register GPIO controller */
+	pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
+	pctl->gpio.base = -1;
+	pctl->gpio.ngpio = pctl->data->npins;
+	pctl->gpio.get_direction = sx150x_gpio_get_direction;
+	pctl->gpio.direction_input = sx150x_gpio_direction_input;
+	pctl->gpio.direction_output = sx150x_gpio_direction_output;
+	pctl->gpio.get = sx150x_gpio_get;
+	pctl->gpio.set = sx150x_gpio_set;
+	pctl->gpio.set_single_ended = sx150x_gpio_set_single_ended;
+	pctl->gpio.parent = dev;
+#ifdef CONFIG_OF_GPIO
+	pctl->gpio.of_node = dev->of_node;
+#endif
+	pctl->gpio.can_sleep = true;
+
+	ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl);
+	if (ret)
+		return ret;
+
+	/* Add Interrupt support if an irq is specified */
+	if (client->irq > 0) {
+		pctl->irq_chip.name = devm_kstrdup(dev, client->name,
+						   GFP_KERNEL);
+		pctl->irq_chip.irq_mask = sx150x_irq_mask;
+		pctl->irq_chip.irq_unmask = sx150x_irq_unmask;
+		pctl->irq_chip.irq_set_type = sx150x_irq_set_type;
+		pctl->irq_chip.irq_bus_lock = sx150x_irq_bus_lock;
+		pctl->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
+
+		pctl->irq.masked = ~0;
+		pctl->irq.sense = 0;
+		pctl->irq.dev_masked = ~0;
+		pctl->irq.dev_sense = 0;
+		pctl->irq.update = -1;
+
+		ret = gpiochip_irqchip_add(&pctl->gpio,
+					   &pctl->irq_chip, 0,
+					   handle_edge_irq, IRQ_TYPE_NONE);
+		if (ret) {
+			dev_err(dev, "could not connect irqchip to gpiochip\n");
+			return ret;
+		}
+
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						sx150x_irq_thread_fn,
+						IRQF_ONESHOT | IRQF_SHARED |
+						IRQF_TRIGGER_FALLING,
+						pctl->irq_chip.name, pctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Pinctrl_desc */
+	pctl->pinctrl_desc.name = "sx150x-pinctrl";
+	pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops;
+	pctl->pinctrl_desc.confops = &sx150x_pinconf_ops;
+	pctl->pinctrl_desc.pins = pctl->data->pins;
+	pctl->pinctrl_desc.npins = pctl->data->npins;
+	pctl->pinctrl_desc.owner = THIS_MODULE;
+
+	pctl->pctldev = pinctrl_register(&pctl->pinctrl_desc, dev, pctl);
+	if (IS_ERR(pctl->pctldev)) {
+		dev_err(dev, "Failed to register pinctrl device\n");
+		return PTR_ERR(pctl->pctldev);
+	}
+
+	return 0;
+}
+
+static struct i2c_driver sx150x_driver = {
+	.driver = {
+		.name = "sx150x-pinctrl",
+		.of_match_table = of_match_ptr(sx150x_of_match),
+	},
+	.probe    = sx150x_probe,
+	.id_table = sx150x_id,
+};
+
+static int __init sx150x_init(void)
+{
+	return i2c_add_driver(&sx150x_driver);
+}
+subsys_initcall(sx150x_init);
diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
deleted file mode 100644
index fb83c0453489..000000000000
--- a/include/linux/amba/pl061.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/types.h>
-
-/* platform data for the PL061 GPIO driver */
-
-struct pl061_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* number of the first IRQ.
-	 * If the IRQ functionality in not desired this must be set to 0.
-	 */
-	unsigned	irq_base;
-
-	u8		directions;	/* startup directions, 1: out, 0: in */
-	u8		values;		/* startup values */
-};
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 24e2cc56beb1..c2748accea71 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -82,8 +82,6 @@ enum single_ended_mode {
  *	implies that if the chip supports IRQs, these IRQs need to be threaded
  *	as the chip access may sleep when e.g. reading out the IRQ status
  *	registers.
- * @irq_not_threaded: flag must be set if @can_sleep is set but the
- *	IRQs don't need to be threaded
  * @read_reg: reader function for generic GPIO
  * @write_reg: writer function for generic GPIO
  * @pin2mask: some generic GPIO controllers work with the big-endian bits
@@ -91,7 +89,7 @@ enum single_ended_mode {
  *	bit. This callback assigns the right bit mask.
  * @reg_dat: data (in) register for generic GPIO
  * @reg_set: output set register (out=high) for generic GPIO
- * @reg_clk: output clear register (out=low) for generic GPIO
+ * @reg_clr: output clear register (out=low) for generic GPIO
  * @reg_dir: direction setting register for generic GPIO
  * @bgpio_bits: number of register bits used for a generic GPIO i.e.
  *	<register width> * 8
@@ -109,8 +107,10 @@ enum single_ended_mode {
  *	for GPIO IRQs, provided by GPIO driver
  * @irq_default_type: default IRQ triggering type applied during GPIO driver
  *	initialization, provided by GPIO driver
- * @irq_parent: GPIO IRQ chip parent/bank linux irq number,
- *	provided by GPIO driver
+ * @irq_chained_parent: GPIO IRQ chip parent/bank linux irq number,
+ *	provided by GPIO driver for chained interrupt (not for nested
+ *	interrupts).
+ * @irq_nested: True if set the interrupt handling is nested.
  * @irq_need_valid_mask: If set core allocates @irq_valid_mask with all
  *	bits set to one
  * @irq_valid_mask: If not %NULL holds bitmask of GPIOs which are valid to
@@ -166,7 +166,6 @@ struct gpio_chip {
 	u16			ngpio;
 	const char		*const *names;
 	bool			can_sleep;
-	bool			irq_not_threaded;
 
 #if IS_ENABLED(CONFIG_GPIO_GENERIC)
 	unsigned long (*read_reg)(void __iomem *reg);
@@ -192,7 +191,8 @@ struct gpio_chip {
 	unsigned int		irq_base;
 	irq_flow_handler_t	irq_handler;
 	unsigned int		irq_default_type;
-	int			irq_parent;
+	int			irq_chained_parent;
+	bool			irq_nested;
 	bool			irq_need_valid_mask;
 	unsigned long		*irq_valid_mask;
 	struct lock_class_key	*lock_key;
@@ -270,24 +270,40 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 		int parent_irq,
 		irq_flow_handler_t parent_handler);
 
+void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+		struct irq_chip *irqchip,
+		int parent_irq);
+
 int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 			  struct irq_chip *irqchip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
 			  unsigned int type,
+			  bool nested,
 			  struct lock_class_key *lock_key);
 
+/* FIXME: I assume threaded IRQchips do not have the lockdep problem */
+static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
+			  struct irq_chip *irqchip,
+			  unsigned int first_irq,
+			  irq_flow_handler_t handler,
+			  unsigned int type)
+{
+	return _gpiochip_irqchip_add(gpiochip, irqchip, first_irq,
+				     handler, type, true, NULL);
+}
+
 #ifdef CONFIG_LOCKDEP
 #define gpiochip_irqchip_add(...)				\
 (								\
 	({							\
 		static struct lock_class_key _key;		\
-		_gpiochip_irqchip_add(__VA_ARGS__, &_key);	\
+		_gpiochip_irqchip_add(__VA_ARGS__, false, &_key); \
 	})							\
 )
 #else
 #define gpiochip_irqchip_add(...)				\
-	_gpiochip_irqchip_add(__VA_ARGS__, NULL)
+	_gpiochip_irqchip_add(__VA_ARGS__, false, NULL)
 #endif
 
 #endif /* CONFIG_GPIOLIB_IRQCHIP */
diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c
index 37b3f141053d..f1eab587dfea 100644
--- a/tools/gpio/gpio-hammer.c
+++ b/tools/gpio/gpio-hammer.c
@@ -23,54 +23,31 @@
 #include <getopt.h>
 #include <sys/ioctl.h>
 #include <linux/gpio.h>
+#include "gpio-utils.h"
 
 int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 		  unsigned int loops)
 {
-	struct gpiohandle_request req;
 	struct gpiohandle_data data;
-	char *chrdev_name;
 	char swirr[] = "-\\|/";
 	int fd;
 	int ret;
 	int i, j;
 	unsigned int iteration = 0;
 
-	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+	memset(&data.values, 0, sizeof(data.values));
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_OUTPUT, &data,
+					   "gpio-hammler");
 	if (ret < 0)
-		return -ENOMEM;
+		goto exit_error;
+	else
+		fd = ret;
 
-	fd = open(chrdev_name, 0);
-	if (fd == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to open %s\n", chrdev_name);
-		goto exit_close_error;
-	}
-
-	/* Request lines as output */
-	for (i = 0; i < nlines; i++)
-		req.lineoffsets[i] = lines[i];
-	req.flags = GPIOHANDLE_REQUEST_OUTPUT; /* Request as output */
-	strcpy(req.consumer_label, "gpio-hammer");
-	req.lines = nlines;
-	ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GET LINEHANDLE "
-			"IOCTL (%d)\n",
-			ret);
+	ret = gpiotools_get_values(fd, &data);
+	if (ret < 0)
 		goto exit_close_error;
-	}
 
-	/* Read initial states */
-	ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE "
-			"VALUES IOCTL (%d)\n",
-			ret);
-		goto exit_close_error;
-	}
 	fprintf(stdout, "Hammer lines [");
 	for (i = 0; i < nlines; i++) {
 		fprintf(stdout, "%d", lines[i]);
@@ -92,23 +69,14 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 		for (i = 0; i < nlines; i++)
 			data.values[i] = !data.values[i];
 
-		ret = ioctl(req.fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, &data);
-		if (ret == -1) {
-			ret = -errno;
-			fprintf(stderr, "Failed to issue GPIOHANDLE SET LINE "
-				"VALUES IOCTL (%d)\n",
-				ret);
+		ret = gpiotools_set_values(fd, &data);
+		if (ret < 0)
 			goto exit_close_error;
-		}
+
 		/* Re-read values to get status */
-		ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data);
-		if (ret == -1) {
-			ret = -errno;
-			fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE "
-				"VALUES IOCTL (%d)\n",
-				ret);
+		ret = gpiotools_get_values(fd, &data);
+		if (ret < 0)
 			goto exit_close_error;
-		}
 
 		fprintf(stdout, "[%c] ", swirr[j]);
 		j++;
@@ -132,9 +100,8 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 	ret = 0;
 
 exit_close_error:
-	if (close(fd) == -1)
-		perror("Failed to close GPIO character device file");
-	free(chrdev_name);
+	gpiotools_release_linehandle(fd);
+exit_error:
 	return ret;
 }
 
diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c
index 8208718f2c99..b86a32d90d88 100644
--- a/tools/gpio/gpio-utils.c
+++ b/tools/gpio/gpio-utils.c
@@ -2,10 +2,266 @@
  * GPIO tools - helpers library for the GPIO tools
  *
  * Copyright (C) 2015 Linus Walleij
+ * Copyright (C) 2016 Bamvor Jian Zhang
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
 
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <sys/ioctl.h>
+#include <linux/gpio.h>
 #include "gpio-utils.h"
+
+#define COMSUMER "gpio-utils"
+
+/**
+ * doc: Operation of gpio
+ *
+ * Provide the api of gpiochip for chardev interface. There are two
+ * types of api.  The first one provide as same function as each
+ * ioctl, including request and release for lines of gpio, read/write
+ * the value of gpio. If the user want to do lots of read and write of
+ * lines of gpio, user should use this type of api.
+ *
+ * The second one provide the easy to use api for user. Each of the
+ * following api will request gpio lines, do the operation and then
+ * release these lines.
+ */
+/**
+ * gpiotools_request_linehandle() - request gpio lines in a gpiochip
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @flag:		The new flag for requsted gpio. Reference
+ *			"linux/gpio.h" for the meaning of flag.
+ * @data:		Default value will be set to gpio when flag is
+ *			GPIOHANDLE_REQUEST_OUTPUT.
+ * @consumer_label:	The name of consumer, such as "sysfs",
+ *			"powerkey". This is useful for other users to
+ *			know who is using.
+ *
+ * Request gpio lines through the ioctl provided by chardev. User
+ * could call gpiotools_set_values() and gpiotools_get_values() to
+ * read and write respectively through the returned fd. Call
+ * gpiotools_release_linehandle() to release these lines after that.
+ *
+ * Return:		On success return the fd;
+ *			On failure return the errno.
+ */
+int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
+				 unsigned int nlines, unsigned int flag,
+				 struct gpiohandle_data *data,
+				 const char *consumer_label)
+{
+	struct gpiohandle_request req;
+	char *chrdev_name;
+	int fd;
+	int i;
+	int ret;
+
+	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+	if (ret < 0)
+		return -ENOMEM;
+
+	fd = open(chrdev_name, 0);
+	if (fd == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to open %s\n", chrdev_name);
+		goto exit_close_error;
+	}
+
+	for (i = 0; i < nlines; i++)
+		req.lineoffsets[i] = lines[i];
+
+	req.flags = flag;
+	strcpy(req.consumer_label, consumer_label);
+	req.lines = nlines;
+	if (flag & GPIOHANDLE_REQUEST_OUTPUT)
+		memcpy(req.default_values, data, sizeof(req.default_values));
+
+	ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue GET LINEHANDLE IOCTL (%d)\n",
+			ret);
+	}
+
+exit_close_error:
+	if (close(fd) == -1)
+		perror("Failed to close GPIO character device file");
+	free(chrdev_name);
+	return ret < 0 ? ret : req.fd;
+}
+/**
+ * gpiotools_set_values(): Set the value of gpio(s)
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ * @data:		The array of values want to set.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_set_values(const int fd, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue %s (%d)\n",
+			"GPIOHANDLE_SET_LINE_VALUES_IOCTL", ret);
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_get_values(): Get the value of gpio(s)
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ * @data:		The array of values get from hardware.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_get_values(const int fd, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue %s (%d)\n",
+			"GPIOHANDLE_GET_LINE_VALUES_IOCTL", ret);
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_release_linehandle(): Release the line(s) of gpiochip
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_release_linehandle(const int fd)
+{
+	int ret;
+
+	ret = close(fd);
+	if (ret == -1) {
+		perror("Failed to close GPIO LINEHANDLE device file");
+		ret = -errno;
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_get(): Get value from specific line
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @line:		number of line, such as 2.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_get(const char *device_name, unsigned int line)
+{
+	struct gpiohandle_data data;
+	unsigned int lines[] = {line};
+
+	gpiotools_gets(device_name, lines, 1, &data);
+	return data.values[0];
+}
+
+
+/**
+ * gpiotools_gets(): Get values from specific lines.
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0".
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @data:		The array of values get from gpiochip.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_gets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data)
+{
+	int fd;
+	int ret;
+	int ret_close;
+
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_INPUT, data,
+					   COMSUMER);
+	if (ret < 0)
+		return ret;
+
+	fd = ret;
+	ret = gpiotools_get_values(fd, data);
+	ret_close = gpiotools_release_linehandle(fd);
+	return ret < 0 ? ret : ret_close;
+}
+
+/**
+ * gpiotools_set(): Set value to specific line
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @line:		number of line, such as 2.
+ * @value:		The value of gpio, must be 0(low) or 1(high).
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_set(const char *device_name, unsigned int line,
+		  unsigned int value)
+{
+	struct gpiohandle_data data;
+	unsigned int lines[] = {line};
+
+	data.values[0] = value;
+	return gpiotools_sets(device_name, lines, 1, &data);
+}
+
+/**
+ * gpiotools_sets(): Set values to specific lines.
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0".
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @data:		The array of values set to gpiochip, must be
+ *			0(low) or 1(high).
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_sets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_OUTPUT, data,
+					   COMSUMER);
+	if (ret < 0)
+		return ret;
+
+	return gpiotools_release_linehandle(ret);
+}
diff --git a/tools/gpio/gpio-utils.h b/tools/gpio/gpio-utils.h
index 5f57133b8c04..344ea041f8d4 100644
--- a/tools/gpio/gpio-utils.h
+++ b/tools/gpio/gpio-utils.h
@@ -24,4 +24,20 @@ static inline int check_prefix(const char *str, const char *prefix)
 		strncmp(str, prefix, strlen(prefix)) == 0;
 }
 
+int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
+				 unsigned int nlines, unsigned int flag,
+				 struct gpiohandle_data *data,
+				 const char *consumer_label);
+int gpiotools_set_values(const int fd, struct gpiohandle_data *data);
+int gpiotools_get_values(const int fd, struct gpiohandle_data *data);
+int gpiotools_release_linehandle(const int fd);
+
+int gpiotools_get(const char *device_name, unsigned int line);
+int gpiotools_gets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data);
+int gpiotools_set(const char *device_name, unsigned int line,
+		  unsigned int value);
+int gpiotools_sets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data);
+
 #endif /* _GPIO_UTILS_H_ */