aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2019-08-06 18:44:57 -0700
committerDavid S. Miller <davem@davemloft.net>2019-08-06 18:44:57 -0700
commit13dfb3fa494361ea9a5950f27c9cd8b06d28c04f (patch)
tree1bf30874f57c6c6b21160a10282191fcd0868055
parentMerge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue (diff)
parentMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net (diff)
downloadlinux-dev-13dfb3fa494361ea9a5950f27c9cd8b06d28c04f.tar.xz
linux-dev-13dfb3fa494361ea9a5950f27c9cd8b06d28c04f.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--.gitignore3
-rw-r--r--.mailmap3
-rw-r--r--Documentation/PCI/pci-error-recovery.rst5
-rw-r--r--Documentation/RCU/rculist_nulls.txt2
-rw-r--r--Documentation/admin-guide/conf.py10
-rw-r--r--Documentation/admin-guide/hw-vuln/spectre.rst88
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt10
-rw-r--r--Documentation/admin-guide/mm/transhuge.rst2
-rw-r--r--Documentation/conf.py30
-rw-r--r--Documentation/core-api/conf.py10
-rw-r--r--Documentation/crypto/conf.py10
-rw-r--r--Documentation/dev-tools/conf.py10
-rw-r--r--Documentation/devicetree/bindings/arm/idle-states.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/renesas.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml2
-rw-r--r--Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt16
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml2
-rw-r--r--Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml (renamed from Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml)2
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml2
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml4
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml45
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.txt81
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.yaml93
-rw-r--r--Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-controller.yaml1
-rw-r--r--Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt6
-rw-r--r--Documentation/doc-guide/conf.py10
-rw-r--r--Documentation/driver-api/80211/conf.py10
-rw-r--r--Documentation/driver-api/conf.py10
-rw-r--r--Documentation/driver-api/generic-counter.rst4
-rw-r--r--Documentation/driver-api/phy/phy.rst4
-rw-r--r--Documentation/driver-api/pm/conf.py10
-rw-r--r--Documentation/filesystems/conf.py10
-rw-r--r--Documentation/gpu/conf.py10
-rw-r--r--Documentation/hwmon/k8temp.rst2
-rw-r--r--Documentation/index.rst3
-rw-r--r--Documentation/input/conf.py10
-rw-r--r--Documentation/kernel-hacking/conf.py10
-rw-r--r--Documentation/locking/spinlocks.rst4
-rw-r--r--Documentation/maintainer/conf.py10
-rw-r--r--Documentation/media/conf.py12
-rw-r--r--Documentation/memory-barriers.txt2
-rw-r--r--Documentation/networking/conf.py10
-rw-r--r--Documentation/networking/tls-offload.rst23
-rw-r--r--Documentation/power/index.rst2
-rw-r--r--Documentation/powerpc/bootwrapper.rst (renamed from Documentation/powerpc/bootwrapper.txt)28
-rw-r--r--Documentation/powerpc/cpu_families.rst (renamed from Documentation/powerpc/cpu_families.txt)23
-rw-r--r--Documentation/powerpc/cpu_features.rst (renamed from Documentation/powerpc/cpu_features.txt)6
-rw-r--r--Documentation/powerpc/cxl.rst (renamed from Documentation/powerpc/cxl.txt)46
-rw-r--r--Documentation/powerpc/cxlflash.rst (renamed from Documentation/powerpc/cxlflash.txt)10
-rw-r--r--Documentation/powerpc/dawr-power9.rst (renamed from Documentation/powerpc/DAWR-POWER9.txt)15
-rw-r--r--Documentation/powerpc/dscr.rst (renamed from Documentation/powerpc/dscr.txt)18
-rw-r--r--Documentation/powerpc/eeh-pci-error-recovery.rst (renamed from Documentation/powerpc/eeh-pci-error-recovery.txt)108
-rw-r--r--Documentation/powerpc/firmware-assisted-dump.rst (renamed from Documentation/powerpc/firmware-assisted-dump.txt)117
-rw-r--r--Documentation/powerpc/hvcs.rst (renamed from Documentation/powerpc/hvcs.txt)108
-rw-r--r--Documentation/powerpc/index.rst34
-rw-r--r--Documentation/powerpc/isa-versions.rst15
-rw-r--r--Documentation/powerpc/mpc52xx.rst (renamed from Documentation/powerpc/mpc52xx.txt)12
-rw-r--r--Documentation/powerpc/pci_iov_resource_on_powernv.rst (renamed from Documentation/powerpc/pci_iov_resource_on_powernv.txt)15
-rw-r--r--Documentation/powerpc/pmu-ebb.rst (renamed from Documentation/powerpc/pmu-ebb.txt)1
-rw-r--r--Documentation/powerpc/ptrace.rst156
-rw-r--r--Documentation/powerpc/ptrace.txt151
-rw-r--r--Documentation/powerpc/qe_firmware.rst (renamed from Documentation/powerpc/qe_firmware.txt)37
-rw-r--r--Documentation/powerpc/syscall64-abi.rst (renamed from Documentation/powerpc/syscall64-abi.txt)29
-rw-r--r--Documentation/powerpc/transactional_memory.rst (renamed from Documentation/powerpc/transactional_memory.txt)45
-rw-r--r--Documentation/process/conf.py10
-rw-r--r--Documentation/process/deprecated.rst14
-rw-r--r--Documentation/s390/vfio-ccw.rst31
-rw-r--r--Documentation/sh/conf.py10
-rw-r--r--Documentation/sound/conf.py10
-rw-r--r--Documentation/sphinx/load_config.py27
-rw-r--r--Documentation/translations/it_IT/doc-guide/sphinx.rst19
-rw-r--r--Documentation/translations/it_IT/process/index.rst1
-rw-r--r--Documentation/translations/it_IT/process/kernel-docs.rst11
-rw-r--r--Documentation/translations/it_IT/process/maintainer-pgp-guide.rst25
-rw-r--r--Documentation/translations/it_IT/process/programming-language.rst51
-rw-r--r--Documentation/translations/ko_KR/memory-barriers.txt2
-rw-r--r--Documentation/userspace-api/conf.py10
-rw-r--r--Documentation/virt/index.rst (renamed from Documentation/virtual/index.rst)0
-rw-r--r--Documentation/virt/kvm/amd-memory-encryption.rst (renamed from Documentation/virtual/kvm/amd-memory-encryption.rst)0
-rw-r--r--Documentation/virt/kvm/api.txt (renamed from Documentation/virtual/kvm/api.txt)2
-rw-r--r--Documentation/virt/kvm/arm/hyp-abi.txt (renamed from Documentation/virtual/kvm/arm/hyp-abi.txt)0
-rw-r--r--Documentation/virt/kvm/arm/psci.txt (renamed from Documentation/virtual/kvm/arm/psci.txt)0
-rw-r--r--Documentation/virt/kvm/cpuid.rst (renamed from Documentation/virtual/kvm/cpuid.rst)0
-rw-r--r--Documentation/virt/kvm/devices/README (renamed from Documentation/virtual/kvm/devices/README)0
-rw-r--r--Documentation/virt/kvm/devices/arm-vgic-its.txt (renamed from Documentation/virtual/kvm/devices/arm-vgic-its.txt)0
-rw-r--r--Documentation/virt/kvm/devices/arm-vgic-v3.txt (renamed from Documentation/virtual/kvm/devices/arm-vgic-v3.txt)0
-rw-r--r--Documentation/virt/kvm/devices/arm-vgic.txt (renamed from Documentation/virtual/kvm/devices/arm-vgic.txt)0
-rw-r--r--Documentation/virt/kvm/devices/mpic.txt (renamed from Documentation/virtual/kvm/devices/mpic.txt)0
-rw-r--r--Documentation/virt/kvm/devices/s390_flic.txt (renamed from Documentation/virtual/kvm/devices/s390_flic.txt)0
-rw-r--r--Documentation/virt/kvm/devices/vcpu.txt (renamed from Documentation/virtual/kvm/devices/vcpu.txt)0
-rw-r--r--Documentation/virt/kvm/devices/vfio.txt (renamed from Documentation/virtual/kvm/devices/vfio.txt)0
-rw-r--r--Documentation/virt/kvm/devices/vm.txt (renamed from Documentation/virtual/kvm/devices/vm.txt)0
-rw-r--r--Documentation/virt/kvm/devices/xics.txt (renamed from Documentation/virtual/kvm/devices/xics.txt)0
-rw-r--r--Documentation/virt/kvm/devices/xive.txt (renamed from Documentation/virtual/kvm/devices/xive.txt)0
-rw-r--r--Documentation/virt/kvm/halt-polling.txt (renamed from Documentation/virtual/kvm/halt-polling.txt)0
-rw-r--r--Documentation/virt/kvm/hypercalls.txt (renamed from Documentation/virtual/kvm/hypercalls.txt)4
-rw-r--r--Documentation/virt/kvm/index.rst (renamed from Documentation/virtual/kvm/index.rst)1
-rw-r--r--Documentation/virt/kvm/locking.txt (renamed from Documentation/virtual/kvm/locking.txt)0
-rw-r--r--Documentation/virt/kvm/mmu.txt (renamed from Documentation/virtual/kvm/mmu.txt)2
-rw-r--r--Documentation/virt/kvm/msr.txt (renamed from Documentation/virtual/kvm/msr.txt)0
-rw-r--r--Documentation/virt/kvm/nested-vmx.txt (renamed from Documentation/virtual/kvm/nested-vmx.txt)0
-rw-r--r--Documentation/virt/kvm/ppc-pv.txt (renamed from Documentation/virtual/kvm/ppc-pv.txt)0
-rw-r--r--Documentation/virt/kvm/review-checklist.txt (renamed from Documentation/virtual/kvm/review-checklist.txt)2
-rw-r--r--Documentation/virt/kvm/s390-diag.txt (renamed from Documentation/virtual/kvm/s390-diag.txt)0
-rw-r--r--Documentation/virt/kvm/timekeeping.txt (renamed from Documentation/virtual/kvm/timekeeping.txt)0
-rw-r--r--Documentation/virt/kvm/vcpu-requests.rst (renamed from Documentation/virtual/kvm/vcpu-requests.rst)0
-rw-r--r--Documentation/virt/paravirt_ops.rst (renamed from Documentation/virtual/paravirt_ops.rst)0
-rw-r--r--Documentation/virt/uml/UserModeLinux-HOWTO.txt (renamed from Documentation/virtual/uml/UserModeLinux-HOWTO.txt)0
-rw-r--r--Documentation/vm/conf.py10
-rw-r--r--Documentation/vm/hmm.rst2
-rw-r--r--Documentation/watchdog/hpwdt.rst2
-rw-r--r--Documentation/x86/conf.py10
-rw-r--r--MAINTAINERS58
-rw-r--r--Makefile8
-rw-r--r--arch/arm/Kconfig.debug5
-rw-r--r--arch/arm/boot/dts/bcm47094-linksys-panamera.dts3
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-geam.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-pico-hobbit.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-pico-pi.dts4
-rw-r--r--arch/arm/boot/dts/imx7ulp.dtsi2
-rw-r--r--arch/arm/configs/u8500_defconfig34
-rw-r--r--arch/arm/include/asm/dma-mapping.h4
-rw-r--r--arch/arm/mach-davinci/sleep.S1
-rw-r--r--arch/arm/mach-netx/Kconfig22
-rw-r--r--arch/arm/mach-netx/Makefile13
-rw-r--r--arch/arm/mach-netx/Makefile.boot3
-rw-r--r--arch/arm/mach-netx/fb.c65
-rw-r--r--arch/arm/mach-netx/fb.h12
-rw-r--r--arch/arm/mach-netx/generic.c182
-rw-r--r--arch/arm/mach-netx/generic.h14
-rw-r--r--arch/arm/mach-netx/include/mach/hardware.h27
-rw-r--r--arch/arm/mach-netx/include/mach/irqs.h58
-rw-r--r--arch/arm/mach-netx/include/mach/netx-regs.h420
-rw-r--r--arch/arm/mach-netx/include/mach/pfifo.h42
-rw-r--r--arch/arm/mach-netx/include/mach/uncompress.h63
-rw-r--r--arch/arm/mach-netx/include/mach/xc.h30
-rw-r--r--arch/arm/mach-netx/nxdb500.c197
-rw-r--r--arch/arm/mach-netx/nxdkn.c90
-rw-r--r--arch/arm/mach-netx/nxeb500hmi.c174
-rw-r--r--arch/arm/mach-netx/pfifo.c56
-rw-r--r--arch/arm/mach-netx/time.c141
-rw-r--r--arch/arm/mach-netx/xc.c246
-rw-r--r--arch/arm/mm/Kconfig5
-rw-r--r--arch/arm/mm/dma-mapping.c61
-rw-r--r--arch/arm/mm/init.c5
-rw-r--r--arch/arm64/Makefile2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi3
-rw-r--r--arch/arm64/include/asm/arch_gicv3.h6
-rw-r--r--arch/arm64/include/asm/cpufeature.h7
-rw-r--r--arch/arm64/include/asm/daifflags.h2
-rw-r--r--arch/arm64/include/asm/efi.h6
-rw-r--r--arch/arm64/include/asm/elf.h2
-rw-r--r--arch/arm64/include/asm/memory.h10
-rw-r--r--arch/arm64/include/asm/pgtable.h5
-rw-r--r--arch/arm64/include/asm/processor.h14
-rw-r--r--arch/arm64/include/asm/ptrace.h2
-rw-r--r--arch/arm64/include/asm/stacktrace.h78
-rw-r--r--arch/arm64/include/asm/vdso/compat_gettimeofday.h40
-rw-r--r--arch/arm64/include/uapi/asm/bpf_perf_event.h2
-rw-r--r--arch/arm64/kernel/cpufeature.c8
-rw-r--r--arch/arm64/kernel/debug-monitors.c14
-rw-r--r--arch/arm64/kernel/entry.S22
-rw-r--r--arch/arm64/kernel/fpsimd.c29
-rw-r--r--arch/arm64/kernel/hw_breakpoint.c11
-rw-r--r--arch/arm64/kernel/module.c4
-rw-r--r--arch/arm64/kernel/perf_callchain.c7
-rw-r--r--arch/arm64/kernel/probes/kprobes.c40
-rw-r--r--arch/arm64/kernel/process.c36
-rw-r--r--arch/arm64/kernel/return_address.c12
-rw-r--r--arch/arm64/kernel/smp.c2
-rw-r--r--arch/arm64/kernel/stacktrace.c62
-rw-r--r--arch/arm64/kernel/time.c7
-rw-r--r--arch/arm64/kernel/traps.c13
-rw-r--r--arch/arm64/kernel/vdso/Makefile13
-rw-r--r--arch/arm64/kernel/vdso32/Makefile14
-rw-r--r--arch/arm64/mm/fault.c57
-rw-r--r--arch/csky/include/uapi/asm/byteorder.h2
-rw-r--r--arch/csky/include/uapi/asm/cachectl.h2
-rw-r--r--arch/csky/include/uapi/asm/perf_regs.h2
-rw-r--r--arch/csky/include/uapi/asm/ptrace.h2
-rw-r--r--arch/csky/include/uapi/asm/sigcontext.h2
-rw-r--r--arch/csky/include/uapi/asm/unistd.h2
-rw-r--r--arch/mips/cavium-octeon/octeon-usb.c1
-rw-r--r--arch/mips/kernel/cacheinfo.c2
-rw-r--r--arch/mips/kernel/i8253.c3
-rw-r--r--arch/mips/kvm/emulate.c1
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c13
-rw-r--r--arch/mips/pci/ops-bcm63xx.c1
-rw-r--r--arch/mips/vdso/vdso.h1
-rw-r--r--arch/nds32/include/uapi/asm/auxvec.h2
-rw-r--r--arch/nds32/include/uapi/asm/byteorder.h2
-rw-r--r--arch/nds32/include/uapi/asm/cachectl.h2
-rw-r--r--arch/nds32/include/uapi/asm/fp_udfiex_crtl.h2
-rw-r--r--arch/nds32/include/uapi/asm/param.h2
-rw-r--r--arch/nds32/include/uapi/asm/ptrace.h2
-rw-r--r--arch/nds32/include/uapi/asm/sigcontext.h2
-rw-r--r--arch/nds32/include/uapi/asm/unistd.h2
-rw-r--r--arch/parisc/Makefile5
-rw-r--r--arch/parisc/boot/compressed/Makefile4
-rw-r--r--arch/parisc/boot/compressed/vmlinux.lds.S4
-rw-r--r--arch/parisc/configs/defconfig (renamed from arch/parisc/configs/default_defconfig)0
-rw-r--r--arch/parisc/include/asm/kprobes.h4
-rw-r--r--arch/parisc/kernel/ftrace.c3
-rw-r--r--arch/parisc/kernel/pacache.S3
-rw-r--r--arch/parisc/math-emu/Makefile1
-rw-r--r--arch/parisc/mm/fault.c1
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/include/asm/hvcall.h11
-rw-r--r--arch/powerpc/include/asm/pmc.h5
-rw-r--r--arch/powerpc/include/asm/unistd.h1
-rw-r--r--arch/powerpc/include/uapi/asm/bpf_perf_event.h2
-rw-r--r--arch/powerpc/include/uapi/asm/kvm_para.h2
-rw-r--r--arch/powerpc/kernel/Makefile3
-rw-r--r--arch/powerpc/kernel/align.c4
-rw-r--r--arch/powerpc/kernel/dma-common.c17
-rw-r--r--arch/powerpc/kernel/entry_32.S8
-rw-r--r--arch/powerpc/kernel/entry_64.S5
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S2
-rw-r--r--arch/powerpc/kernel/signal_32.c3
-rw-r--r--arch/powerpc/kernel/signal_64.c5
-rw-r--r--arch/powerpc/kernel/syscalls/syscall.tbl2
-rw-r--r--arch/powerpc/kvm/book3s_32_mmu.c1
-rw-r--r--arch/powerpc/kvm/book3s_hv.c13
-rw-r--r--arch/powerpc/kvm/book3s_xive.c4
-rw-r--r--arch/powerpc/kvm/book3s_xive_native.c4
-rw-r--r--arch/powerpc/mm/book3s64/hash_utils.c9
-rw-r--r--arch/powerpc/mm/kasan/kasan_init_32.c7
-rw-r--r--arch/powerpc/mm/mem.c2
-rw-r--r--arch/powerpc/platforms/pseries/papr_scm.c73
-rw-r--r--arch/powerpc/sysdev/xive/common.c7
-rw-r--r--arch/riscv/boot/dts/sifive/fu540-c000.dtsi16
-rw-r--r--arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts9
-rw-r--r--arch/riscv/configs/defconfig10
-rw-r--r--arch/riscv/include/asm/Kbuild1
-rw-r--r--arch/riscv/include/uapi/asm/auxvec.h2
-rw-r--r--arch/riscv/include/uapi/asm/bitsperlong.h2
-rw-r--r--arch/riscv/include/uapi/asm/byteorder.h2
-rw-r--r--arch/riscv/include/uapi/asm/hwcap.h2
-rw-r--r--arch/riscv/include/uapi/asm/ptrace.h2
-rw-r--r--arch/riscv/include/uapi/asm/sigcontext.h2
-rw-r--r--arch/riscv/include/uapi/asm/ucontext.h2
-rw-r--r--arch/riscv/include/uapi/asm/unistd.h1
-rw-r--r--arch/riscv/kernel/vdso/Makefile2
-rw-r--r--arch/s390/boot/Makefile2
-rw-r--r--arch/s390/boot/boot.h2
-rw-r--r--arch/s390/boot/head.S1
-rw-r--r--arch/s390/boot/kaslr.c1
-rw-r--r--arch/s390/boot/version.c7
-rw-r--r--arch/s390/configs/debug_defconfig330
-rw-r--r--arch/s390/configs/defconfig233
-rw-r--r--arch/s390/configs/zfcpdump_defconfig31
-rw-r--r--arch/s390/hypfs/hypfs_vm.c4
-rw-r--r--arch/s390/include/asm/bitops.h73
-rw-r--r--arch/s390/include/asm/page.h2
-rw-r--r--arch/s390/include/asm/qdio.h10
-rw-r--r--arch/s390/include/asm/setup.h5
-rw-r--r--arch/s390/include/asm/unistd.h1
-rw-r--r--arch/s390/include/uapi/asm/bpf_perf_event.h2
-rw-r--r--arch/s390/include/uapi/asm/ipl.h2
-rw-r--r--arch/s390/include/uapi/asm/zcrypt.h35
-rw-r--r--arch/s390/kernel/machine_kexec_reloc.c1
-rw-r--r--arch/s390/kernel/perf_cpum_cf_diag.c2
-rw-r--r--arch/s390/kernel/syscalls/syscall.tbl2
-rw-r--r--arch/s390/lib/xor.c1
-rw-r--r--arch/s390/mm/fault.c3
-rw-r--r--arch/s390/mm/gmap.c4
-rw-r--r--arch/s390/mm/pgalloc.c6
-rw-r--r--arch/sh/include/uapi/asm/setup.h2
-rw-r--r--arch/sh/include/uapi/asm/types.h2
-rw-r--r--arch/sparc/include/uapi/asm/oradax.h2
-rw-r--r--arch/x86/entry/calling.h17
-rw-r--r--arch/x86/entry/entry_32.S13
-rw-r--r--arch/x86/entry/entry_64.S21
-rw-r--r--arch/x86/events/intel/core.c9
-rw-r--r--arch/x86/events/intel/ds.c2
-rw-r--r--arch/x86/include/asm/cpufeatures.h3
-rw-r--r--arch/x86/include/asm/kvm_host.h7
-rw-r--r--arch/x86/include/asm/vdso/gettimeofday.h36
-rw-r--r--arch/x86/include/uapi/asm/byteorder.h2
-rw-r--r--arch/x86/include/uapi/asm/hwcap2.h2
-rw-r--r--arch/x86/include/uapi/asm/sigcontext32.h2
-rw-r--r--arch/x86/include/uapi/asm/types.h2
-rw-r--r--arch/x86/kernel/cpu/bugs.c107
-rw-r--r--arch/x86/kernel/cpu/common.c44
-rw-r--r--arch/x86/kernel/head_64.S8
-rw-r--r--arch/x86/kernel/hpet.c12
-rw-r--r--arch/x86/kernel/stacktrace.c2
-rw-r--r--arch/x86/kernel/sysfb_efi.c46
-rw-r--r--arch/x86/kvm/mmu.c2
-rw-r--r--arch/x86/kvm/svm.c13
-rw-r--r--arch/x86/kvm/vmx/nested.c4
-rw-r--r--arch/x86/kvm/vmx/vmx.c13
-rw-r--r--arch/x86/kvm/x86.c16
-rw-r--r--arch/x86/mm/fault.c15
-rw-r--r--arch/xtensa/kernel/coprocessor.S1
-rw-r--r--block/bfq-iosched.c67
-rw-r--r--block/blk-cgroup.c9
-rw-r--r--block/blk-iolatency.c3
-rw-r--r--block/blk-mq-sched.h9
-rw-r--r--block/blk-mq.c10
-rw-r--r--block/blk-rq-qos.c7
-rw-r--r--block/blk-settings.c3
-rw-r--r--block/genhd.c2
-rw-r--r--drivers/acpi/arm64/iort.c4
-rw-r--r--drivers/acpi/device_pm.c4
-rw-r--r--drivers/acpi/nfit/core.c28
-rw-r--r--drivers/acpi/nfit/nfit.h24
-rw-r--r--drivers/acpi/scan.c6
-rw-r--r--drivers/android/binder.c5
-rw-r--r--drivers/ata/libahci_platform.c4
-rw-r--r--drivers/ata/libata-zpodd.c2
-rw-r--r--drivers/atm/iphase.c8
-rw-r--r--drivers/base/core.c30
-rw-r--r--drivers/base/firmware_loader/firmware.h4
-rw-r--r--drivers/block/ataflop.c1
-rw-r--r--drivers/block/drbd/drbd_receiver.c14
-rw-r--r--drivers/block/loop.c16
-rw-r--r--drivers/block/nbd.c2
-rw-r--r--drivers/bluetooth/hci_ath.c3
-rw-r--r--drivers/bluetooth/hci_bcm.c3
-rw-r--r--drivers/bluetooth/hci_intel.c3
-rw-r--r--drivers/bluetooth/hci_ldisc.c13
-rw-r--r--drivers/bluetooth/hci_mrvl.c3
-rw-r--r--drivers/bluetooth/hci_qca.c3
-rw-r--r--drivers/bluetooth/hci_uart.h1
-rw-r--r--drivers/char/hpet.c3
-rw-r--r--drivers/char/ipmi/ipmb_dev_int.c2
-rw-r--r--drivers/char/tpm/tpm-chip.c43
-rw-r--r--drivers/char/tpm/tpm.h2
-rw-r--r--drivers/char/tpm/tpm1-cmd.c36
-rw-r--r--drivers/char/tpm/tpm2-cmd.c6
-rw-r--r--drivers/clk/at91/clk-generated.c2
-rw-r--r--drivers/clk/mediatek/clk-mt8183.c46
-rw-r--r--drivers/clk/renesas/renesas-cpg-mssr.c16
-rw-r--r--drivers/clk/sprd/Kconfig1
-rw-r--r--drivers/cpufreq/pasemi-cpufreq.c23
-rw-r--r--drivers/firewire/core-device.c2
-rw-r--r--drivers/firewire/core-iso.c2
-rw-r--r--drivers/firewire/core-topology.c1
-rw-r--r--drivers/firmware/Kconfig5
-rw-r--r--drivers/firmware/iscsi_ibft.c4
-rw-r--r--drivers/fpga/Kconfig1
-rw-r--r--drivers/gpio/gpiolib.c23
-rw-r--r--drivers/gpu/drm/Kconfig2
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c3
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c26
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c2
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c2
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c78
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c19
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c10
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c9
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c9
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c9
-rw-r--r--drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c3
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_crat.c1
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v10.c1
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc.c6
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc_link.c30
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c39
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc_resource.c11
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc_stream.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/dce/dce_abm.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c24
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c21
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c2
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c5
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c18
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c22
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c2
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c37
-rw-r--r--drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c6
-rw-r--r--drivers/gpu/drm/amd/display/dc/inc/core_types.h2
-rw-r--r--drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h4
-rw-r--r--drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h1
-rw-r--r--drivers/gpu/drm/amd/display/include/dpcd_defs.h2
-rw-r--r--drivers/gpu/drm/amd/include/kgd_pp_interface.h1
-rw-r--r--drivers/gpu/drm/amd/powerplay/amdgpu_smu.c123
-rw-r--r--drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c9
-rw-r--r--drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h11
-rw-r--r--drivers/gpu/drm/amd/powerplay/navi10_ppt.c160
-rw-r--r--drivers/gpu/drm/amd/powerplay/navi10_ppt.h4
-rw-r--r--drivers/gpu/drm/amd/powerplay/smu_v11_0.c54
-rw-r--r--drivers/gpu/drm/amd/powerplay/vega20_ppt.c54
-rw-r--r--drivers/gpu/drm/bochs/bochs_kms.c1
-rw-r--r--drivers/gpu/drm/bridge/Kconfig4
-rw-r--r--drivers/gpu/drm/drm_client.c60
-rw-r--r--drivers/gpu/drm/drm_client_modeset.c2
-rw-r--r--drivers/gpu/drm/drm_fb_helper.c51
-rw-r--r--drivers/gpu/drm/drm_framebuffer.c2
-rw-r--r--drivers/gpu/drm/drm_modes.c2
-rw-r--r--drivers/gpu/drm/exynos/Kconfig1
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimc.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_g2d.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_gsc.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_scaler.c4
-rw-r--r--drivers/gpu/drm/i915/Makefile1
-rw-r--r--drivers/gpu/drm/i915/display/intel_bios.c2
-rw-r--r--drivers/gpu/drm/i915/display/intel_bw.c15
-rw-r--r--drivers/gpu/drm/i915/display/intel_cdclk.c11
-rw-r--r--drivers/gpu/drm/i915/display/intel_display.c6
-rw-r--r--drivers/gpu/drm/i915/display/intel_display_power.c11
-rw-r--r--drivers/gpu/drm/i915/display/intel_dp.c1
-rw-r--r--drivers/gpu/drm/i915/display/intel_vbt_defs.h6
-rw-r--r--drivers/gpu/drm/i915/gem/i915_gem_mman.c2
-rw-r--r--drivers/gpu/drm/i915/gem/i915_gem_pages.c2
-rw-r--r--drivers/gpu/drm/i915/gem/i915_gem_pm.c7
-rw-r--r--drivers/gpu/drm/i915/gem/i915_gem_userptr.c10
-rw-r--r--drivers/gpu/drm/i915/gt/intel_context.c27
-rw-r--r--drivers/gpu/drm/i915/gt/intel_engine_cs.c20
-rw-r--r--drivers/gpu/drm/i915/gt/intel_engine_pm.c24
-rw-r--r--drivers/gpu/drm/i915/gt/intel_engine_pm.h12
-rw-r--r--drivers/gpu/drm/i915/gt/intel_engine_types.h12
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt_pm.c21
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt_pm.h2
-rw-r--r--drivers/gpu/drm/i915/gt/intel_lrc.c10
-rw-r--r--drivers/gpu/drm/i915/gt/intel_reset.c58
-rw-r--r--drivers/gpu/drm/i915/gt/intel_ringbuffer.c31
-rw-r--r--drivers/gpu/drm/i915/gt/intel_workarounds.c38
-rw-r--r--drivers/gpu/drm/i915/gt/mock_engine.c1
-rw-r--r--drivers/gpu/drm/i915/gt/selftest_reset.c5
-rw-r--r--drivers/gpu/drm/i915/gt/selftest_workarounds.c7
-rw-r--r--drivers/gpu/drm/i915/gvt/cmd_parser.c10
-rw-r--r--drivers/gpu/drm/i915/gvt/fb_decoder.c6
-rw-r--r--drivers/gpu/drm/i915/gvt/gtt.c9
-rw-r--r--drivers/gpu/drm/i915/gvt/kvmgt.c12
-rw-r--r--drivers/gpu/drm/i915/gvt/scheduler.c59
-rw-r--r--drivers/gpu/drm/i915/gvt/trace_points.c2
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h5
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c25
-rw-r--r--drivers/gpu/drm/i915/i915_gem_gtt.c8
-rw-r--r--drivers/gpu/drm/i915/i915_gpu_error.c7
-rw-r--r--drivers/gpu/drm/i915/i915_perf.c67
-rw-r--r--drivers/gpu/drm/i915/i915_trace.h76
-rw-r--r--drivers/gpu/drm/i915/intel_runtime_pm.c10
-rw-r--r--drivers/gpu/drm/i915/intel_wakeref.h15
-rw-r--r--drivers/gpu/drm/msm/adreno/a5xx_gpu.c2
-rw-r--r--drivers/gpu/drm/msm/adreno/a6xx_gpu.c1
-rw-r--r--drivers/gpu/drm/msm/adreno/adreno_gpu.c1
-rw-r--r--drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c3
-rw-r--r--drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c16
-rw-r--r--drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c2
-rw-r--r--drivers/gpu/drm/msm/msm_drv.c5
-rw-r--r--drivers/gpu/drm/msm/msm_gem.c47
-rw-r--r--drivers/gpu/drm/nouveau/dispnv50/disp.c2
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_svm.c47
-rw-r--r--drivers/gpu/drm/ttm/ttm_page_alloc_dma.c6
-rw-r--r--drivers/hid/hid-a4tech.c30
-rw-r--r--drivers/hid/hid-holtek-kbd.c9
-rw-r--r--drivers/hid/hid-ids.h5
-rw-r--r--drivers/hid/hid-logitech-dj.c10
-rw-r--r--drivers/hid/hid-logitech-hidpp.c32
-rw-r--r--drivers/hid/hid-quirks.c2
-rw-r--r--drivers/hid/hid-sony.c15
-rw-r--r--drivers/hid/hid-tmff.c12
-rw-r--r--drivers/hid/usbhid/hiddev.c12
-rw-r--r--drivers/hid/wacom_wac.c12
-rw-r--r--drivers/hwmon/nct6775.c3
-rw-r--r--drivers/hwmon/occ/common.c6
-rw-r--r--drivers/i2c/busses/i2c-at91-core.c2
-rw-r--r--drivers/i2c/busses/i2c-at91-master.c9
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c10
-rw-r--r--drivers/i2c/busses/i2c-nvidia-gpu.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c1
-rw-r--r--drivers/infiniband/core/core_priv.h5
-rw-r--r--drivers/infiniband/core/counters.c11
-rw-r--r--drivers/infiniband/core/device.c102
-rw-r--r--drivers/infiniband/core/mad.c20
-rw-r--r--drivers/infiniband/core/user_mad.c6
-rw-r--r--drivers/infiniband/hw/bnxt_re/ib_verbs.c7
-rw-r--r--drivers/infiniband/hw/bnxt_re/qplib_res.c13
-rw-r--r--drivers/infiniband/hw/bnxt_re/qplib_res.h2
-rw-r--r--drivers/infiniband/hw/bnxt_re/qplib_sp.c14
-rw-r--r--drivers/infiniband/hw/bnxt_re/qplib_sp.h7
-rw-r--r--drivers/infiniband/hw/hfi1/chip.c11
-rw-r--r--drivers/infiniband/hw/hfi1/rc.c2
-rw-r--r--drivers/infiniband/hw/hfi1/tid_rdma.c43
-rw-r--r--drivers/infiniband/hw/hfi1/verbs.c2
-rw-r--r--drivers/infiniband/hw/hns/Kconfig6
-rw-r--r--drivers/infiniband/hw/hns/Makefile8
-rw-r--r--drivers/infiniband/hw/hns/hns_roce_db.c15
-rw-r--r--drivers/infiniband/hw/hns/hns_roce_hw_v1.c4
-rw-r--r--drivers/infiniband/hw/mlx5/main.c7
-rw-r--r--drivers/infiniband/hw/mlx5/mlx5_ib.h1
-rw-r--r--drivers/infiniband/hw/mlx5/mr.c50
-rw-r--r--drivers/infiniband/hw/mlx5/odp.c7
-rw-r--r--drivers/infiniband/hw/mlx5/qp.c13
-rw-r--r--drivers/infiniband/hw/qedr/main.c10
-rw-r--r--drivers/infiniband/sw/siw/siw_cm.c3
-rw-r--r--drivers/infiniband/sw/siw/siw_main.c1
-rw-r--r--drivers/infiniband/sw/siw/siw_qp.c6
-rw-r--r--drivers/iommu/amd_iommu_init.c90
-rw-r--r--drivers/iommu/amd_iommu_types.h9
-rw-r--r--drivers/iommu/intel-iommu-debugfs.c4
-rw-r--r--drivers/iommu/intel-iommu.c189
-rw-r--r--drivers/iommu/iova.c23
-rw-r--r--drivers/iommu/virtio-iommu.c40
-rw-r--r--drivers/irqchip/irq-gic-v3-its.c2
-rw-r--r--drivers/irqchip/irq-gic-v3.c4
-rw-r--r--drivers/irqchip/irq-imx-gpcv2.c1
-rw-r--r--drivers/irqchip/irq-mbigen.c9
-rw-r--r--drivers/isdn/hardware/mISDN/hfcsusb.c13
-rw-r--r--drivers/macintosh/smu.c1
-rw-r--r--drivers/md/bcache/super.c3
-rw-r--r--drivers/md/dm-table.c16
-rw-r--r--drivers/misc/eeprom/Kconfig3
-rw-r--r--drivers/misc/eeprom/at24.c2
-rw-r--r--drivers/misc/habanalabs/goya/goya.c6
-rw-r--r--drivers/misc/mei/hw-me-regs.h3
-rw-r--r--drivers/misc/mei/pci-me.c3
-rw-r--r--drivers/mmc/core/queue.c5
-rw-r--r--drivers/mmc/host/dw_mmc.c3
-rw-r--r--drivers/mmc/host/meson-mx-sdio.c2
-rw-r--r--drivers/mmc/host/sdhci-sprd.c1
-rw-r--r--drivers/mtd/hyperbus/Kconfig3
-rw-r--r--drivers/mtd/nand/onenand/onenand_base.c1
-rw-r--r--drivers/mtd/nand/raw/nand_micron.c14
-rw-r--r--drivers/net/arcnet/arc-rimi.c3
-rw-r--r--drivers/net/arcnet/com20020-isa.c6
-rw-r--r--drivers/net/arcnet/com90io.c2
-rw-r--r--drivers/net/arcnet/com90xx.c3
-rw-r--r--drivers/net/bonding/bond_main.c9
-rw-r--r--drivers/net/can/dev.c2
-rw-r--r--drivers/net/can/flexcan.c39
-rw-r--r--drivers/net/can/rcar/rcar_canfd.c9
-rw-r--r--drivers/net/can/sja1000/peak_pcmcia.c2
-rw-r--r--drivers/net/can/spi/mcp251x.c49
-rw-r--r--drivers/net/can/usb/peak_usb/pcan_usb_core.c10
-rw-r--r--drivers/net/can/usb/peak_usb/pcan_usb_fd.c2
-rw-r--r--drivers/net/can/usb/peak_usb/pcan_usb_pro.c2
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c29
-rw-r--r--drivers/net/dsa/qca8k.c10
-rw-r--r--drivers/net/dsa/sja1105/sja1105_dynamic_config.c14
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c143
-rw-r--r--drivers/net/dsa/sja1105/sja1105_ptp.c7
-rw-r--r--drivers/net/ethernet/8390/Kconfig4
-rw-r--r--drivers/net/ethernet/agere/et131x.c2
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.c4
-rw-r--r--drivers/net/ethernet/amd/Kconfig2
-rw-r--r--drivers/net/ethernet/apple/Kconfig4
-rw-r--r--drivers/net/ethernet/atheros/ag71xx.c2
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig6
-rw-r--r--drivers/net/ethernet/broadcom/bcmsysport.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c3
-rw-r--r--drivers/net/ethernet/broadcom/bnxt/bnxt.c2
-rw-r--r--drivers/net/ethernet/broadcom/genet/bcmgenet.c2
-rw-r--r--drivers/net/ethernet/cavium/thunder/thunder_bgx.c18
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c5
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c6
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c2
-rw-r--r--drivers/net/ethernet/freescale/enetc/Kconfig2
-rw-r--r--drivers/net/ethernet/freescale/fman/fman.c3
-rw-r--r--drivers/net/ethernet/google/gve/gve.h8
-rw-r--r--drivers/net/ethernet/google/gve/gve_ethtool.c4
-rw-r--r--drivers/net/ethernet/google/gve/gve_rx.c34
-rw-r--r--drivers/net/ethernet/hisilicon/hip04_eth.c28
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_main.c2
-rw-r--r--drivers/net/ethernet/marvell/mvmdio.c31
-rw-r--r--drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c87
-rw-r--r--drivers/net/ethernet/marvell/sky2.c7
-rw-r--r--drivers/net/ethernet/mediatek/Kconfig1
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/dev.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en.h12
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en/params.h5
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en/port.c27
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en/port.h6
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c69
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_main.c41
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_rep.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_stats.c8
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_tc.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/fs_core.h5
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c5
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c7
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c1
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum.h4
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c1
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h1
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c76
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c17
-rw-r--r--drivers/net/ethernet/mscc/ocelot.c1
-rw-r--r--drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c4
-rw-r--r--drivers/net/ethernet/ni/Kconfig2
-rw-r--r--drivers/net/ethernet/packetengines/Kconfig6
-rw-r--r--drivers/net/ethernet/packetengines/Makefile2
-rw-r--r--drivers/net/ethernet/qlogic/qed/qed_int.c2
-rw-r--r--drivers/net/ethernet/qlogic/qed/qed_rdma.c2
-rw-r--r--drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c13
-rw-r--r--drivers/net/ethernet/realtek/r8169_main.c14
-rw-r--r--drivers/net/ethernet/rocker/rocker_main.c2
-rw-r--r--drivers/net/ethernet/samsung/Kconfig2
-rw-r--r--drivers/net/ethernet/smsc/smc911x.c1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c4
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c87
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c50
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c2
-rw-r--r--drivers/net/ethernet/toshiba/spider_net.c1
-rw-r--r--drivers/net/ethernet/xscale/Kconfig2
-rw-r--r--drivers/net/hamradio/baycom_epp.c3
-rw-r--r--drivers/net/phy/fixed_phy.c6
-rw-r--r--drivers/net/phy/mscc.c16
-rw-r--r--drivers/net/phy/phy_device.c6
-rw-r--r--drivers/net/phy/phy_led_triggers.c3
-rw-r--r--drivers/net/phy/phylink.c10
-rw-r--r--drivers/net/ppp/pppoe.c3
-rw-r--r--drivers/net/ppp/pppox.c13
-rw-r--r--drivers/net/ppp/pptp.c3
-rw-r--r--drivers/net/tun.c9
-rw-r--r--drivers/net/usb/pegasus.c2
-rw-r--r--drivers/net/usb/qmi_wwan.c1
-rw-r--r--drivers/net/usb/r8152.c12
-rw-r--r--drivers/net/wan/sdla.c1
-rw-r--r--drivers/net/wireless/intel/iwlwifi/fw/api/rx.h3
-rw-r--r--drivers/net/wireless/intel/iwlwifi/fw/dbg.c22
-rw-r--r--drivers/net/wireless/intel/iwlwifi/iwl-drv.c4
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/fw.c29
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c58
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/mvm.h8
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/nvm.c2
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/ops.c4
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/rs.c539
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/rs.h3
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c185
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/sta.c6
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/sta.h12
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/tx.c3
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/utils.c4
-rw-r--r--drivers/net/wireless/intel/iwlwifi/pcie/drv.c3
-rw-r--r--drivers/net/wireless/intel/iwlwifi/pcie/tx.c2
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c8
-rw-r--r--drivers/net/wireless/marvell/mwifiex/main.h1
-rw-r--r--drivers/net/wireless/marvell/mwifiex/scan.c3
-rw-r--r--drivers/nfc/nfcmrvl/main.c4
-rw-r--r--drivers/nfc/nfcmrvl/uart.c4
-rw-r--r--drivers/nfc/nfcmrvl/usb.c1
-rw-r--r--drivers/nfc/st-nci/se.c2
-rw-r--r--drivers/nfc/st21nfca/se.c2
-rw-r--r--drivers/nvdimm/btt_devs.c16
-rw-r--r--drivers/nvdimm/bus.c210
-rw-r--r--drivers/nvdimm/core.c10
-rw-r--r--drivers/nvdimm/dimm_devs.c4
-rw-r--r--drivers/nvdimm/namespace_devs.c36
-rw-r--r--drivers/nvdimm/nd-core.h71
-rw-r--r--drivers/nvdimm/pfn_devs.c24
-rw-r--r--drivers/nvdimm/pmem.c4
-rw-r--r--drivers/nvdimm/region.c24
-rw-r--r--drivers/nvdimm/region_devs.c12
-rw-r--r--drivers/nvme/host/core.c12
-rw-r--r--drivers/nvme/host/multipath.c8
-rw-r--r--drivers/nvme/host/nvme.h6
-rw-r--r--drivers/nvme/host/pci.c6
-rw-r--r--drivers/perf/arm_pmu.c2
-rw-r--r--drivers/platform/olpc/olpc-xo175-ec.c6
-rw-r--r--drivers/platform/x86/intel_pmc_core.c1
-rw-r--r--drivers/platform/x86/pcengines-apuv2.c6
-rw-r--r--drivers/powercap/intel_rapl_common.c2
-rw-r--r--drivers/powercap/powercap_sys.c2
-rw-r--r--drivers/regulator/axp20x-regulator.c10
-rw-r--r--drivers/regulator/lp87565-regulator.c8
-rw-r--r--drivers/regulator/of_regulator.c4
-rw-r--r--drivers/s390/block/dasd_alias.c22
-rw-r--r--drivers/s390/char/con3215.c1
-rw-r--r--drivers/s390/char/tape_core.c3
-rw-r--r--drivers/s390/cio/qdio_main.c24
-rw-r--r--drivers/s390/cio/vfio_ccw_async.c2
-rw-r--r--drivers/s390/cio/vfio_ccw_cp.c28
-rw-r--r--drivers/s390/cio/vfio_ccw_drv.c2
-rw-r--r--drivers/s390/crypto/ap_queue.c1
-rw-r--r--drivers/s390/crypto/zcrypt_msgtype6.c17
-rw-r--r--drivers/s390/virtio/virtio_ccw.c4
-rw-r--r--drivers/scsi/Kconfig4
-rw-r--r--drivers/scsi/device_handler/scsi_dh_alua.c7
-rw-r--r--drivers/scsi/fcoe/fcoe_ctlr.c140
-rw-r--r--drivers/scsi/hpsa.c18
-rw-r--r--drivers/scsi/ibmvscsi/ibmvfc.c2
-rw-r--r--drivers/scsi/libfc/fc_rport.c5
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c5
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_fusion.c27
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c12
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c2
-rw-r--r--drivers/scsi/scsi_lib.c6
-rw-r--r--drivers/soc/fsl/qe/qe.c2
-rw-r--r--drivers/spi/spi-bcm2835.c3
-rw-r--r--drivers/spi/spi-fsl-qspi.c2
-rw-r--r--drivers/spi/spi-gpio.c6
-rw-r--r--drivers/spi/spi-pxa2xx.c14
-rw-r--r--drivers/target/iscsi/cxgbit/cxgbit_cm.c8
-rw-r--r--drivers/target/iscsi/cxgbit/cxgbit_main.c3
-rw-r--r--drivers/thermal/intel/int340x_thermal/processor_thermal_device.c4
-rw-r--r--drivers/tty/hvc/hvcs.c2
-rw-r--r--drivers/tty/serial/Kconfig19
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/netx-serial.c733
-rw-r--r--drivers/tty/tty_ldsem.c5
-rw-r--r--drivers/tty/vt/vt.c6
-rw-r--r--drivers/usb/core/hcd.c4
-rw-r--r--drivers/usb/host/ehci-pci.c4
-rw-r--r--drivers/usb/host/hwa-hc.c2
-rw-r--r--drivers/usb/host/ohci-pci.c2
-rw-r--r--drivers/usb/host/pci-quirks.c45
-rw-r--r--drivers/usb/host/pci-quirks.h2
-rw-r--r--drivers/usb/host/xhci-pci.c2
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/misc/usb251xb.c15
-rw-r--r--drivers/usb/storage/scsiglue.c11
-rw-r--r--drivers/vhost/vhost.h2
-rw-r--r--drivers/xen/gntdev.c2
-rw-r--r--drivers/xen/privcmd.c35
-rw-r--r--drivers/xen/swiotlb-xen.c34
-rw-r--r--drivers/xen/xen-pciback/conf_space_capability.c3
-rw-r--r--drivers/xen/xlate_mmu.c32
-rw-r--r--fs/afs/fsclient.c51
-rw-r--r--fs/afs/yfsclient.c54
-rw-r--r--fs/block_dev.c142
-rw-r--r--fs/btrfs/backref.c2
-rw-r--r--fs/btrfs/locking.c9
-rw-r--r--fs/btrfs/ordered-data.c11
-rw-r--r--fs/btrfs/send.c77
-rw-r--r--fs/btrfs/transaction.c32
-rw-r--r--fs/btrfs/transaction.h3
-rw-r--r--fs/compat_ioctl.c3
-rw-r--r--fs/coredump.c44
-rw-r--r--fs/dax.c2
-rw-r--r--fs/exec.c2
-rw-r--r--fs/f2fs/file.c63
-rw-r--r--fs/f2fs/gc.c70
-rw-r--r--fs/f2fs/super.c48
-rw-r--r--fs/gfs2/bmap.c15
-rw-r--r--fs/io_uring.c82
-rw-r--r--fs/iomap/Makefile2
-rw-r--r--fs/namespace.c4
-rw-r--r--fs/ocfs2/xattr.c3
-rw-r--r--fs/open.c19
-rw-r--r--fs/super.c5
-rw-r--r--fs/xfs/scrub/dabtree.c6
-rw-r--r--fs/xfs/xfs_itable.c3
-rw-r--r--include/asm-generic/futex.h21
-rw-r--r--include/asm-generic/getorder.h50
-rw-r--r--include/drm/drm_client.h2
-rw-r--r--include/drm/drm_mode_config.h7
-rw-r--r--include/linux/blk-cgroup.h1
-rw-r--r--include/linux/blk_types.h5
-rw-r--r--include/linux/clk.h1
-rw-r--r--include/linux/cred.h8
-rw-r--r--include/linux/device.h6
-rw-r--r--include/linux/dim.h56
-rw-r--r--include/linux/dma-mapping.h4
-rw-r--r--include/linux/elevator.h1
-rw-r--r--include/linux/filter.h13
-rw-r--r--include/linux/fs.h6
-rw-r--r--include/linux/gpio/consumer.h64
-rw-r--r--include/linux/hmm.h54
-rw-r--r--include/linux/if_pppox.h3
-rw-r--r--include/linux/if_rmnet.h4
-rw-r--r--include/linux/iova.h6
-rw-r--r--include/linux/mlx5/fs.h1
-rw-r--r--include/linux/mlx5/mlx5_ifc.h6
-rw-r--r--include/linux/mod_devicetable.h1
-rw-r--r--include/linux/of.h2
-rw-r--r--include/linux/page-flags-layout.h18
-rw-r--r--include/linux/page-flags.h4
-rw-r--r--include/linux/sched.h10
-rw-r--r--include/linux/sched/numa_balancing.h4
-rw-r--r--include/linux/skmsg.h8
-rw-r--r--include/linux/wait.h13
-rw-r--r--include/net/cfg80211.h15
-rw-r--r--include/net/tc_act/tc_police.h4
-rw-r--r--include/net/tc_act/tc_sample.h2
-rw-r--r--include/net/tcp.h3
-rw-r--r--include/net/tls.h13
-rw-r--r--include/rdma/ib_verbs.h4
-rw-r--r--include/rdma/rdmavt_qp.h9
-rw-r--r--include/scsi/libfc.h52
-rw-r--r--include/scsi/libfcoe.h3
-rw-r--r--include/soc/fsl/qe/qe.h2
-rw-r--r--include/sound/compress_driver.h5
-rw-r--r--include/sound/sof/control.h2
-rw-r--r--include/sound/sof/dai-intel.h2
-rw-r--r--include/sound/sof/dai.h2
-rw-r--r--include/sound/sof/header.h2
-rw-r--r--include/sound/sof/info.h2
-rw-r--r--include/sound/sof/pm.h2
-rw-r--r--include/sound/sof/stream.h2
-rw-r--r--include/sound/sof/topology.h2
-rw-r--r--include/sound/sof/trace.h2
-rw-r--r--include/sound/sof/xtensa.h2
-rw-r--r--include/trace/events/dma_fence.h2
-rw-r--r--include/trace/events/napi.h4
-rw-r--r--include/trace/events/qdisc.h4
-rw-r--r--include/trace/events/tegra_apb_dma.h4
-rw-r--r--include/uapi/linux/bpfilter.h2
-rw-r--r--include/uapi/linux/ipmi_bmc.h2
-rw-r--r--include/uapi/linux/isst_if.h2
-rw-r--r--include/uapi/linux/kvm.h4
-rw-r--r--include/uapi/linux/netfilter/nf_synproxy.h2
-rw-r--r--include/uapi/linux/netfilter/xt_connlabel.h6
-rw-r--r--include/uapi/linux/psp-sev.h2
-rw-r--r--include/uapi/linux/rxrpc.h2
-rw-r--r--include/uapi/linux/serial_core.h3
-rw-r--r--include/uapi/linux/socket.h19
-rw-r--r--include/uapi/linux/usb/g_uvc.h2
-rw-r--r--include/uapi/linux/vbox_vmmdev_types.h2
-rw-r--r--include/uapi/linux/vboxguest.h2
-rw-r--r--include/uapi/linux/virtio_iommu.h32
-rw-r--r--include/uapi/linux/virtio_pmem.h2
-rw-r--r--include/uapi/linux/vmcore.h2
-rw-r--r--include/uapi/linux/wmi.h2
-rw-r--r--include/uapi/misc/fastrpc.h2
-rw-r--r--include/uapi/rdma/rvt-abi.h2
-rw-r--r--include/uapi/rdma/siw-abi.h2
-rw-r--r--include/uapi/scsi/scsi_bsg_ufs.h2
-rw-r--r--include/uapi/sound/skl-tplg-interface.h2
-rw-r--r--include/xen/xen-ops.h3
-rw-r--r--kernel/Makefile1
-rw-r--r--kernel/bpf/verifier.c4
-rw-r--r--kernel/cred.c21
-rw-r--r--kernel/dma/contiguous.c8
-rw-r--r--kernel/dma/mapping.c13
-rw-r--r--kernel/events/core.c2
-rw-r--r--kernel/exit.c5
-rw-r--r--kernel/fork.c2
-rw-r--r--kernel/locking/lockdep.c13
-rw-r--r--kernel/locking/lockdep_proc.c3
-rw-r--r--kernel/locking/mutex.c11
-rw-r--r--kernel/locking/rwsem.c28
-rw-r--r--kernel/sched/fair.c144
-rw-r--r--kernel/signal.c3
-rw-r--r--kernel/trace/trace_functions_graph.c17
-rw-r--r--lib/Kconfig.kasan11
-rw-r--r--lib/Makefile3
-rw-r--r--lib/dim/dim.c4
-rw-r--r--lib/dim/net_dim.c56
-rw-r--r--lib/raid6/Makefile2
-rw-r--r--lib/test_firmware.c5
-rw-r--r--lib/test_meminit.c2
-rw-r--r--lib/vdso/gettimeofday.c79
-rw-r--r--mm/Makefile1
-rw-r--r--mm/balloon_compaction.c69
-rw-r--r--mm/compaction.c11
-rw-r--r--mm/hmm.c10
-rw-r--r--mm/kmemleak.c2
-rw-r--r--mm/memory_hotplug.c2
-rw-r--r--mm/memremap.c (renamed from kernel/memremap.c)0
-rw-r--r--mm/migrate.c21
-rw-r--r--mm/slub.c8
-rw-r--r--mm/vmalloc.c9
-rw-r--r--mm/vmscan.c9
-rw-r--r--net/bridge/br.c5
-rw-r--r--net/bridge/br_multicast.c3
-rw-r--r--net/bridge/br_private.h9
-rw-r--r--net/bridge/br_vlan.c29
-rw-r--r--net/bridge/netfilter/ebtables.c32
-rw-r--r--net/bridge/netfilter/nft_meta_bridge.c10
-rw-r--r--net/can/gw.c48
-rw-r--r--net/core/dev.c17
-rw-r--r--net/core/filter.c6
-rw-r--r--net/core/skmsg.c4
-rw-r--r--net/core/sock_map.c19
-rw-r--r--net/dsa/tag_sja1105.c12
-rw-r--r--net/ipv4/inet_fragment.c2
-rw-r--r--net/ipv4/ipip.c3
-rw-r--r--net/ipv4/tcp_ulp.c13
-rw-r--r--net/ipv6/ip6_gre.c3
-rw-r--r--net/ipv6/ip6_tunnel.c6
-rw-r--r--net/ipv6/route.c2
-rw-r--r--net/iucv/af_iucv.c14
-rw-r--r--net/l2tp/l2tp_ppp.c3
-rw-r--r--net/mac80211/iface.c1
-rw-r--r--net/mac80211/mlme.c10
-rw-r--r--net/mac80211/util.c7
-rw-r--r--net/netfilter/ipset/ip_set_bitmap_ipmac.c2
-rw-r--r--net/netfilter/ipset/ip_set_core.c2
-rw-r--r--net/netfilter/ipset/ip_set_hash_ipmac.c6
-rw-r--r--net/netfilter/nft_meta.c16
-rw-r--r--net/netrom/af_netrom.c1
-rw-r--r--net/openvswitch/datapath.c15
-rw-r--r--net/rds/rdma_transport.c5
-rw-r--r--net/rxrpc/ar-internal.h1
-rw-r--r--net/rxrpc/peer_event.c2
-rw-r--r--net/rxrpc/peer_object.c18
-rw-r--r--net/rxrpc/sendmsg.c1
-rw-r--r--net/sched/act_bpf.c9
-rw-r--r--net/sched/act_connmark.c9
-rw-r--r--net/sched/act_csum.c9
-rw-r--r--net/sched/act_ct.c9
-rw-r--r--net/sched/act_ctinfo.c9
-rw-r--r--net/sched/act_gact.c8
-rw-r--r--net/sched/act_ife.c13
-rw-r--r--net/sched/act_mirred.c13
-rw-r--r--net/sched/act_mpls.c8
-rw-r--r--net/sched/act_nat.c9
-rw-r--r--net/sched/act_pedit.c10
-rw-r--r--net/sched/act_police.c8
-rw-r--r--net/sched/act_sample.c10
-rw-r--r--net/sched/act_simple.c10
-rw-r--r--net/sched/act_skbedit.c11
-rw-r--r--net/sched/act_skbmod.c11
-rw-r--r--net/sched/act_tunnel_key.c8
-rw-r--r--net/sched/act_vlan.c25
-rw-r--r--net/sched/sch_codel.c6
-rw-r--r--net/sctp/socket.c4
-rw-r--r--net/smc/af_smc.c15
-rw-r--r--net/tipc/netlink_compat.c11
-rw-r--r--net/tipc/socket.c3
-rw-r--r--net/tls/tls_main.c97
-rw-r--r--net/tls/tls_sw.c83
-rw-r--r--net/vmw_vsock/hyperv_transport.c8
-rw-r--r--net/wireless/core.c6
-rw-r--r--net/wireless/nl80211.c4
-rw-r--r--net/wireless/util.c27
-rw-r--r--samples/vfio-mdev/mdpy-defs.h2
-rw-r--r--scripts/Kbuild.include3
-rw-r--r--scripts/Kconfig.include2
-rw-r--r--scripts/Makefile.lib2
-rw-r--r--scripts/Makefile.modpost82
-rwxr-xr-xscripts/gen_compile_commands.py4
-rwxr-xr-xscripts/headers_install.sh6
-rw-r--r--scripts/kconfig/confdata.c4
-rwxr-xr-xscripts/link-vmlinux.sh2
-rwxr-xr-xscripts/sphinx-pre-install118
-rw-r--r--security/Kconfig.hardening7
-rw-r--r--security/selinux/ss/policydb.c6
-rw-r--r--security/selinux/ss/sidtab.c5
-rw-r--r--sound/ac97/bus.c13
-rw-r--r--sound/core/compress_offload.c60
-rw-r--r--sound/core/pcm_native.c12
-rw-r--r--sound/hda/hdac_i915.c10
-rw-r--r--sound/pci/hda/hda_codec.c2
-rw-r--r--sound/pci/hda/hda_intel.c5
-rw-r--r--sound/pci/hda/patch_conexant.c1
-rw-r--r--sound/usb/helper.c2
-rw-r--r--sound/usb/line6/podhd.c2
-rw-r--r--sound/usb/line6/variax.c2
-rw-r--r--tools/arch/arm/include/uapi/asm/kvm.h12
-rw-r--r--tools/arch/arm64/include/uapi/asm/kvm.h10
-rw-r--r--tools/arch/powerpc/include/uapi/asm/mman.h4
-rw-r--r--tools/arch/sparc/include/uapi/asm/mman.h4
-rw-r--r--tools/arch/x86/include/uapi/asm/kvm.h22
-rw-r--r--tools/arch/x86/include/uapi/asm/vmx.h1
-rw-r--r--tools/include/uapi/asm-generic/mman-common.h15
-rw-r--r--tools/include/uapi/asm-generic/mman.h10
-rw-r--r--tools/include/uapi/asm-generic/unistd.h8
-rw-r--r--tools/include/uapi/drm/drm.h1
-rw-r--r--tools/include/uapi/drm/i915_drm.h209
-rw-r--r--tools/include/uapi/linux/if_link.h5
-rw-r--r--tools/include/uapi/linux/kvm.h7
-rw-r--r--tools/include/uapi/linux/sched.h30
-rw-r--r--tools/include/uapi/linux/usbdevice_fs.h26
-rw-r--r--tools/lib/bpf/btf.c5
-rw-r--r--tools/lib/bpf/hashmap.h5
-rw-r--r--tools/lib/bpf/libbpf.c34
-rw-r--r--tools/lib/bpf/xsk.c11
-rw-r--r--tools/objtool/check.c7
-rw-r--r--tools/objtool/check.h3
-rw-r--r--tools/perf/Documentation/perf-script.txt8
-rw-r--r--tools/perf/Documentation/perf.data-file-format.txt2
-rw-r--r--tools/perf/arch/x86/entry/syscalls/syscall_64.tbl2
-rw-r--r--tools/perf/builtin-probe.c10
-rw-r--r--tools/perf/builtin-script.c2
-rw-r--r--tools/perf/builtin-stat.c9
-rwxr-xr-xtools/perf/trace/beauty/usbdevfs_ioctl.sh9
-rw-r--r--tools/perf/util/evsel.c2
-rw-r--r--tools/perf/util/header.c11
-rw-r--r--tools/perf/util/probe-event.c1
-rw-r--r--tools/perf/util/session.c22
-rw-r--r--tools/perf/util/session.h1
-rw-r--r--tools/perf/util/stat-shadow.c3
-rw-r--r--tools/perf/util/zstd.c4
-rw-r--r--tools/scripts/Makefile.include9
-rwxr-xr-xtools/testing/ktest/config-bisect.pl4
-rw-r--r--tools/testing/selftests/bpf/Makefile3
-rw-r--r--tools/testing/selftests/bpf/progs/sendmsg6_prog.c3
-rwxr-xr-xtools/testing/selftests/bpf/test_xdp_vlan.sh57
-rwxr-xr-xtools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh9
-rwxr-xr-xtools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh9
-rw-r--r--tools/testing/selftests/bpf/verifier/ctx_skb.c11
-rw-r--r--tools/testing/selftests/cgroup/cgroup_util.c3
-rwxr-xr-xtools/testing/selftests/kmod/kmod.sh6
-rw-r--r--tools/testing/selftests/kselftest.h15
-rw-r--r--tools/testing/selftests/livepatch/functions.sh46
-rw-r--r--tools/testing/selftests/net/.gitignore4
-rwxr-xr-xtools/testing/selftests/net/forwarding/gre_multipath.sh28
-rw-r--r--tools/testing/selftests/net/tls.c223
-rw-r--r--tools/testing/selftests/pidfd/pidfd_test.c6
-rw-r--r--tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json94
-rw-r--r--tools/testing/selftests/x86/test_vsyscall.c2
-rw-r--r--usr/include/Makefile4
-rw-r--r--virt/kvm/arm/arm.c2
-rw-r--r--virt/kvm/arm/vgic/vgic-mmio-v3.c2
-rw-r--r--virt/kvm/arm/vgic/vgic.h4
1012 files changed, 9587 insertions, 7699 deletions
diff --git a/.gitignore b/.gitignore
index 8f5422cba6e2..2030c7a4d2f8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -142,3 +142,6 @@ x509.genkey
# Kdevelop4
*.kdev4
+
+# Clang's compilation database file
+/compile_commands.json
diff --git a/.mailmap b/.mailmap
index 0fef932de3db..acba1a6163f1 100644
--- a/.mailmap
+++ b/.mailmap
@@ -98,6 +98,7 @@ Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Jean Tourrilhes <jt@hpl.hp.com>
+<jean-philippe@linaro.org> <jean-philippe.brucker@arm.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jeff Layton <jlayton@kernel.org> <jlayton@redhat.com>
Jeff Layton <jlayton@kernel.org> <jlayton@poochiereds.net>
@@ -116,6 +117,7 @@ John Stultz <johnstul@us.ibm.com>
Juha Yrjola <at solidboot.com>
Juha Yrjola <juha.yrjola@nokia.com>
Juha Yrjola <juha.yrjola@solidboot.com>
+Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
@@ -132,6 +134,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
+Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index 7e30f43a9659..13beee23cb04 100644
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -403,7 +403,7 @@ That is, the recovery API only requires that:
.. note::
Implementation details for the powerpc platform are discussed in
- the file Documentation/powerpc/eeh-pci-error-recovery.txt
+ the file Documentation/powerpc/eeh-pci-error-recovery.rst
As of this writing, there is a growing list of device drivers with
patches implementing error recovery. Not all of these patches are in
@@ -421,3 +421,6 @@ That is, the recovery API only requires that:
- drivers/net/ixgbe
- drivers/net/cxgb3
- drivers/net/s2io.c
+
+The End
+-------
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 8151f0195f76..23f115dc87cf 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -1,7 +1,7 @@
Using hlist_nulls to protect read-mostly linked lists and
objects using SLAB_TYPESAFE_BY_RCU allocations.
-Please read the basics in Documentation/RCU/listRCU.txt
+Please read the basics in Documentation/RCU/listRCU.rst
Using special makers (called 'nulls') is a convenient way
to solve following problem :
diff --git a/Documentation/admin-guide/conf.py b/Documentation/admin-guide/conf.py
deleted file mode 100644
index 86f738953799..000000000000
--- a/Documentation/admin-guide/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel User Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'linux-user.tex', 'Linux Kernel User Documentation',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst
index 25f3b2532198..e05e581af5cf 100644
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -41,10 +41,11 @@ Related CVEs
The following CVE entries describe Spectre variants:
- ============= ======================= =================
+ ============= ======================= ==========================
CVE-2017-5753 Bounds check bypass Spectre variant 1
CVE-2017-5715 Branch target injection Spectre variant 2
- ============= ======================= =================
+ CVE-2019-1125 Spectre v1 swapgs Spectre variant 1 (swapgs)
+ ============= ======================= ==========================
Problem
-------
@@ -78,6 +79,13 @@ There are some extensions of Spectre variant 1 attacks for reading data
over the network, see :ref:`[12] <spec_ref12>`. However such attacks
are difficult, low bandwidth, fragile, and are considered low risk.
+Note that, despite "Bounds Check Bypass" name, Spectre variant 1 is not
+only about user-controlled array bounds checks. It can affect any
+conditional checks. The kernel entry code interrupt, exception, and NMI
+handlers all have conditional swapgs checks. Those may be problematic
+in the context of Spectre v1, as kernel code can speculatively run with
+a user GS.
+
Spectre variant 2 (Branch Target Injection)
-------------------------------------------
@@ -132,6 +140,9 @@ not cover all possible attack vectors.
1. A user process attacking the kernel
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Spectre variant 1
+~~~~~~~~~~~~~~~~~
+
The attacker passes a parameter to the kernel via a register or
via a known address in memory during a syscall. Such parameter may
be used later by the kernel as an index to an array or to derive
@@ -144,7 +155,40 @@ not cover all possible attack vectors.
potentially be influenced for Spectre attacks, new "nospec" accessor
macros are used to prevent speculative loading of data.
- Spectre variant 2 attacker can :ref:`poison <poison_btb>` the branch
+Spectre variant 1 (swapgs)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ An attacker can train the branch predictor to speculatively skip the
+ swapgs path for an interrupt or exception. If they initialize
+ the GS register to a user-space value, if the swapgs is speculatively
+ skipped, subsequent GS-related percpu accesses in the speculation
+ window will be done with the attacker-controlled GS value. This
+ could cause privileged memory to be accessed and leaked.
+
+ For example:
+
+ ::
+
+ if (coming from user space)
+ swapgs
+ mov %gs:<percpu_offset>, %reg
+ mov (%reg), %reg1
+
+ When coming from user space, the CPU can speculatively skip the
+ swapgs, and then do a speculative percpu load using the user GS
+ value. So the user can speculatively force a read of any kernel
+ value. If a gadget exists which uses the percpu value as an address
+ in another load/store, then the contents of the kernel value may
+ become visible via an L1 side channel attack.
+
+ A similar attack exists when coming from kernel space. The CPU can
+ speculatively do the swapgs, causing the user GS to get used for the
+ rest of the speculative window.
+
+Spectre variant 2
+~~~~~~~~~~~~~~~~~
+
+ A spectre variant 2 attacker can :ref:`poison <poison_btb>` the branch
target buffer (BTB) before issuing syscall to launch an attack.
After entering the kernel, the kernel could use the poisoned branch
target buffer on indirect jump and jump to gadget code in speculative
@@ -280,11 +324,18 @@ The sysfs file showing Spectre variant 1 mitigation status is:
The possible values in this file are:
- ======================================= =================================
- 'Mitigation: __user pointer sanitation' Protection in kernel on a case by
- case base with explicit pointer
- sanitation.
- ======================================= =================================
+ .. list-table::
+
+ * - 'Not affected'
+ - The processor is not vulnerable.
+ * - 'Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers'
+ - The swapgs protections are disabled; otherwise it has
+ protection in the kernel on a case by case base with explicit
+ pointer sanitation and usercopy LFENCE barriers.
+ * - 'Mitigation: usercopy/swapgs barriers and __user pointer sanitization'
+ - Protection in the kernel on a case by case base with explicit
+ pointer sanitation, usercopy LFENCE barriers, and swapgs LFENCE
+ barriers.
However, the protections are put in place on a case by case basis,
and there is no guarantee that all possible attack vectors for Spectre
@@ -366,12 +417,27 @@ Turning on mitigation for Spectre variant 1 and Spectre variant 2
1. Kernel mitigation
^^^^^^^^^^^^^^^^^^^^
+Spectre variant 1
+~~~~~~~~~~~~~~~~~
+
For the Spectre variant 1, vulnerable kernel code (as determined
by code audit or scanning tools) is annotated on a case by case
basis to use nospec accessor macros for bounds clipping :ref:`[2]
<spec_ref2>` to avoid any usable disclosure gadgets. However, it may
not cover all attack vectors for Spectre variant 1.
+ Copy-from-user code has an LFENCE barrier to prevent the access_ok()
+ check from being mis-speculated. The barrier is done by the
+ barrier_nospec() macro.
+
+ For the swapgs variant of Spectre variant 1, LFENCE barriers are
+ added to interrupt, exception and NMI entry where needed. These
+ barriers are done by the FENCE_SWAPGS_KERNEL_ENTRY and
+ FENCE_SWAPGS_USER_ENTRY macros.
+
+Spectre variant 2
+~~~~~~~~~~~~~~~~~
+
For Spectre variant 2 mitigation, the compiler turns indirect calls or
jumps in the kernel into equivalent return trampolines (retpolines)
:ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` to go to the target
@@ -473,6 +539,12 @@ Mitigation control on the kernel command line
Spectre variant 2 mitigation can be disabled or force enabled at the
kernel command line.
+ nospectre_v1
+
+ [X86,PPC] Disable mitigations for Spectre Variant 1
+ (bounds check bypass). With this option data leaks are
+ possible in the system.
+
nospectre_v2
[X86] Disable all mitigations for the Spectre variant 2
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 46b826fcb5ad..47d981a86e2f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2545,7 +2545,7 @@
mem_encrypt=on: Activate SME
mem_encrypt=off: Do not activate SME
- Refer to Documentation/virtual/kvm/amd-memory-encryption.rst
+ Refer to Documentation/virt/kvm/amd-memory-encryption.rst
for details on when memory encryption can be activated.
mem_sleep_default= [SUSPEND] Default system suspend mode:
@@ -2604,7 +2604,7 @@
expose users to several CPU vulnerabilities.
Equivalent to: nopti [X86,PPC]
kpti=0 [ARM64]
- nospectre_v1 [PPC]
+ nospectre_v1 [X86,PPC]
nobp=0 [S390]
nospectre_v2 [X86,PPC,S390,ARM64]
spectre_v2_user=off [X86]
@@ -2965,9 +2965,9 @@
nosmt=force: Force disable SMT, cannot be undone
via the sysfs control file.
- nospectre_v1 [PPC] Disable mitigations for Spectre Variant 1 (bounds
- check bypass). With this option data leaks are possible
- in the system.
+ nospectre_v1 [X86,PPC] Disable mitigations for Spectre Variant 1
+ (bounds check bypass). With this option data leaks are
+ possible in the system.
nospectre_v2 [X86,PPC_FSL_BOOK3E,ARM64] Disable all mitigations for
the Spectre variant 2 (indirect branch prediction)
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index 7ab93a8404b9..bd5714547cee 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -53,7 +53,7 @@ disabled, there is ``khugepaged`` daemon that scans memory and
collapses sequences of basic pages into huge pages.
The THP behaviour is controlled via :ref:`sysfs <thp_sysfs>`
-interface and using madivse(2) and prctl(2) system calls.
+interface and using madvise(2) and prctl(2) system calls.
Transparent Hugepage Support maximizes the usefulness of free memory
if compared to the reservation approach of hugetlbfs by allowing all
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 3b2397bcb565..a8fe845832bc 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -16,6 +16,8 @@ import sys
import os
import sphinx
+from subprocess import check_output
+
# Get Sphinx version
major, minor, patch = sphinx.version_info[:3]
@@ -276,10 +278,21 @@ latex_elements = {
\\setsansfont{DejaVu Sans}
\\setromanfont{DejaVu Serif}
\\setmonofont{DejaVu Sans Mono}
-
'''
}
+# At least one book (translations) may have Asian characters
+# with are only displayed if xeCJK is used
+
+cjk_cmd = check_output(['fc-list', '--format="%{family[0]}\n"']).decode('utf-8', 'ignore')
+if cjk_cmd.find("Noto Sans CJK SC") >= 0:
+ print ("enabling CJK for LaTeX builder")
+ latex_elements['preamble'] += '''
+ % This is needed for translations
+ \\usepackage{xeCJK}
+ \\setCJKmainfont{Noto Sans CJK SC}
+ '''
+
# Fix reference escape troubles with Sphinx 1.4.x
if major == 1 and minor > 3:
latex_elements['preamble'] += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
@@ -410,6 +423,21 @@ latex_documents = [
'The kernel development community', 'manual'),
]
+# Add all other index files from Documentation/ subdirectories
+for fn in os.listdir('.'):
+ doc = os.path.join(fn, "index")
+ if os.path.exists(doc + ".rst"):
+ has = False
+ for l in latex_documents:
+ if l[0] == doc:
+ has = True
+ break
+ if not has:
+ latex_documents.append((doc, fn + '.tex',
+ 'Linux %s Documentation' % fn.capitalize(),
+ 'The kernel development community',
+ 'manual'))
+
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
diff --git a/Documentation/core-api/conf.py b/Documentation/core-api/conf.py
deleted file mode 100644
index db1f7659f3da..000000000000
--- a/Documentation/core-api/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Core-API Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'core-api.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/crypto/conf.py b/Documentation/crypto/conf.py
deleted file mode 100644
index 4335d251ddf3..000000000000
--- a/Documentation/crypto/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Crypto API'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'crypto-api.tex', 'Linux Kernel Crypto API manual',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/dev-tools/conf.py b/Documentation/dev-tools/conf.py
deleted file mode 100644
index 7faafa3f7888..000000000000
--- a/Documentation/dev-tools/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Development tools for the kernel"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'dev-tools.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index 326f29b270ad..2d325bed37e5 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -703,4 +703,4 @@ cpus {
https://www.devicetree.org/specifications/
[6] ARM Linux Kernel documentation - Booting AArch64 Linux
- Documentation/arm64/booting.txt
+ Documentation/arm64/booting.rst
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 08c923f8c257..28eb458f761a 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/shmobile.yaml#
+$id: http://devicetree.org/schemas/arm/renesas.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
index aae53fc3cb1e..2bd519d2e855 100644
--- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/milbeaut.yaml#
+$id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Milbeaut platforms device tree bindings
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
index 4326d2cfa15d..a8765ba29476 100644
--- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/ti/davinci.yaml#
+$id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments DaVinci Platforms Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index c935405458fe..fa4d143a73de 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-ccu.yaml#
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner Clock Control Unit Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index 8cb136c376fb..4f0db8ee226a 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -2,7 +2,7 @@
# Copyright 2019 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx Network Processing Engine
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 7ba167e2e1ea..c602b6fe1c0c 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml#
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index a7fafb9bf5c6..e7daffec88d3 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
index 4e82fd575cec..c676b03c752e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
@@ -5,21 +5,19 @@ Required properties:
- compatible: should be "amazon,al-fic"
- reg: physical base address and size of the registers
- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: must be 2.
- First cell defines the index of the interrupt within the controller.
- Second cell is used to specify the trigger type and must be one of the
- following:
- - bits[3:0] trigger type and level flags
- 1 = low-to-high edge triggered
- 4 = active high level-sensitive
-- interrupt-parent: specifies the parent interrupt controller.
+- #interrupt-cells : must be 2. Specifies the number of cells needed to encode
+ an interrupt source. Supported trigger types are low-to-high edge
+ triggered and active high level-sensitive.
- interrupts: describes which input line in the interrupt parent, this
fic's output is connected to. This field property depends on the parent's
binding
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
Example:
-amazon_fic: interrupt-controller@0xfd8a8500 {
+amazon_fic: interrupt-controller@fd8a8500 {
compatible = "amazon,al-fic";
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index bae10e261fa9..507c141ea760 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -2,7 +2,7 @@
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#"
+$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx XScale Networking Processors Interrupt Controller
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
index d2313b1d9405..0ea21a6f70b4 100644
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -2,7 +2,7 @@
# Copyright 2019 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#"
+$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx AHB Queue Manager
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index d4084c149768..3fb0714e761e 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml#
+$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A83t EMAC Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index c9efd6e2c134..1084e9d2917d 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -37,13 +37,13 @@ required:
examples:
- |
- sid@1c23800 {
+ efuse@1c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
- |
- sid@1c23800 {
+ efuse@1c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
new file mode 100644
index 000000000000..b7c00ed31085
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+select: true
+
+properties:
+ nvmem:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ List of phandle to the nvmem providers.
+
+ nvmem-cells:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ List of phandle to the nvmem data cells.
+
+ nvmem-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Names for the each nvmem provider.
+
+ nvmem-cell-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Names for each nvmem-cells specified.
+
+dependencies:
+ nvmem-names: [ nvmem ]
+ nvmem-cell-names: [ nvmem-cells ]
+
+examples:
+ - |
+ tsens {
+ /* ... */
+ nvmem-cells = <&tsens_calibration>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
index fd06c09b822b..46a7ef485e24 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.txt
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -1,80 +1 @@
-= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
-
-This binding is intended to represent the location of hardware
-configuration data stored in NVMEMs like eeprom, efuses and so on.
-
-On a significant proportion of boards, the manufacturer has stored
-some data on NVMEM, for the OS to be able to retrieve these information
-and act upon it. Obviously, the OS has to know about where to retrieve
-these data from, and where they are stored on the storage device.
-
-This document is here to document this.
-
-= Data providers =
-Contains bindings specific to provider drivers and data cells as children
-of this node.
-
-Optional properties:
- read-only: Mark the provider as read only.
-
-= Data cells =
-These are the child nodes of the provider which contain data cell
-information like offset and size in nvmem provider.
-
-Required properties:
-reg: specifies the offset in byte within the storage device.
-
-Optional properties:
-
-bits: Is pair of bit location and number of bits, which specifies offset
- in bit and number of bits within the address range specified by reg property.
- Offset takes values from 0-7.
-
-For example:
-
- /* Provider */
- qfprom: qfprom@700000 {
- ...
-
- /* Data cells */
- tsens_calibration: calib@404 {
- reg = <0x404 0x10>;
- };
-
- tsens_calibration_bckp: calib_bckp@504 {
- reg = <0x504 0x11>;
- bits = <6 128>
- };
-
- pvs_version: pvs-version@6 {
- reg = <0x6 0x2>
- bits = <7 2>
- };
-
- speed_bin: speed-bin@c{
- reg = <0xc 0x1>;
- bits = <2 3>;
-
- };
- ...
- };
-
-= Data consumers =
-Are device nodes which consume nvmem data cells/providers.
-
-Required-properties:
-nvmem-cells: list of phandle to the nvmem data cells.
-nvmem-cell-names: names for the each nvmem-cells specified. Required if
- nvmem-cells is used.
-
-Optional-properties:
-nvmem : list of phandles to nvmem providers.
-nvmem-names: names for the each nvmem provider. required if nvmem is used.
-
-For example:
-
- tsens {
- ...
- nvmem-cells = <&tsens_calibration>;
- nvmem-cell-names = "calibration";
- };
+This file has been moved to nvmem.yaml and nvmem-consumer.yaml.
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
new file mode 100644
index 000000000000..1c75a059206c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory) Device Tree Bindings
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ This binding is intended to represent the location of hardware
+ configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+ On a significant proportion of boards, the manufacturer has stored
+ some data on NVMEM, for the OS to be able to retrieve these
+ information and act upon it. Obviously, the OS has to know about
+ where to retrieve these data from, and where they are stored on the
+ storage device.
+
+properties:
+ $nodename:
+ pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ read-only:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Mark the provider as read only.
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+ description:
+ Offset and size in bytes within the storage device.
+
+ bits:
+ maxItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 7
+ description:
+ Offset in bit within the address range specified by reg.
+ - minimum: 1
+ description:
+ Size in bit within the address range specified by reg.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+examples:
+ - |
+ qfprom: eeprom@700000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* ... */
+
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x404 0x10>;
+ };
+
+ tsens_calibration_bckp: calib_bckp@504 {
+ reg = <0x504 0x11>;
+ bits = <6 128>;
+ };
+
+ pvs_version: pvs-version@6 {
+ reg = <0x6 0x2>;
+ bits = <7 2>;
+ };
+
+ speed_bin: speed-bin@c{
+ reg = <0xc 0x1>;
+ bits = <2 3>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index 250f9d5aabdf..fa46670de299 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dphy.yaml#
+$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 876c0623f322..a02e2fe2bfb2 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -73,7 +73,6 @@ patternProperties:
Compatible of the SPI device.
reg:
- maxItems: 1
minimum: 0
maximum: 256
description:
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
index a36a0746c056..2807225db902 100644
--- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -2,7 +2,7 @@
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#"
+$id: "http://devicetree.org/schemas/timer/intel,ixp4xx-timer.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx XScale Networking Processors Timers
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index bc7945e9dbfe..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,10 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the downstream ports which will swap the
- differential-pair (D+/D-), default is not-swapped.
- - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
- swapping (boolean, default is not-swapped)
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
diff --git a/Documentation/doc-guide/conf.py b/Documentation/doc-guide/conf.py
deleted file mode 100644
index fd3731182d5a..000000000000
--- a/Documentation/doc-guide/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Documentation Guide'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'kernel-doc-guide.tex', 'Linux Kernel Documentation Guide',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/driver-api/80211/conf.py b/Documentation/driver-api/80211/conf.py
deleted file mode 100644
index 4424b4b0b9c3..000000000000
--- a/Documentation/driver-api/80211/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux 802.11 Driver Developer's Guide"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', '80211.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/driver-api/conf.py b/Documentation/driver-api/conf.py
deleted file mode 100644
index 202726d20088..000000000000
--- a/Documentation/driver-api/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux driver implementer's API guide"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'driver-api.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/driver-api/generic-counter.rst b/Documentation/driver-api/generic-counter.rst
index 0c161b1a3be6..8382f01a53e3 100644
--- a/Documentation/driver-api/generic-counter.rst
+++ b/Documentation/driver-api/generic-counter.rst
@@ -233,7 +233,7 @@ Userspace Interface
Several sysfs attributes are generated by the Generic Counter interface,
and reside under the /sys/bus/counter/devices/counterX directory, where
counterX refers to the respective counter device. Please see
-Documentation/ABI/testing/sys-bus-counter-generic-sysfs for detailed
+Documentation/ABI/testing/sysfs-bus-counter for detailed
information on each Generic Counter interface sysfs attribute.
Through these sysfs attributes, programs and scripts may interact with
@@ -325,7 +325,7 @@ sysfs attributes, where Y is the unique ID of the respective Count:
For a more detailed breakdown of the available Generic Counter interface
sysfs attributes, please refer to the
-Documentation/ABI/testing/sys-bus-counter file.
+Documentation/ABI/testing/sysfs-bus-counter file.
The Signals and Counts associated with the Counter device are registered
to the system as well by the counter_register function. The
diff --git a/Documentation/driver-api/phy/phy.rst b/Documentation/driver-api/phy/phy.rst
index 457c3e0f86d6..8fc1ce0bb905 100644
--- a/Documentation/driver-api/phy/phy.rst
+++ b/Documentation/driver-api/phy/phy.rst
@@ -179,8 +179,8 @@ PHY Mappings
In order to get reference to a PHY without help from DeviceTree, the framework
offers lookups which can be compared to clkdev that allow clk structures to be
-bound to devices. A lookup can be made be made during runtime when a handle to
-the struct phy already exists.
+bound to devices. A lookup can be made during runtime when a handle to the
+struct phy already exists.
The framework offers the following API for registering and unregistering the
lookups::
diff --git a/Documentation/driver-api/pm/conf.py b/Documentation/driver-api/pm/conf.py
deleted file mode 100644
index a89fac11272f..000000000000
--- a/Documentation/driver-api/pm/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Device Power Management"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'pm.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/filesystems/conf.py b/Documentation/filesystems/conf.py
deleted file mode 100644
index ea44172af5c4..000000000000
--- a/Documentation/filesystems/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Filesystems API"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'filesystems.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/gpu/conf.py b/Documentation/gpu/conf.py
deleted file mode 100644
index 1757b040fb32..000000000000
--- a/Documentation/gpu/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux GPU Driver Developer's Guide"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'gpu.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/hwmon/k8temp.rst b/Documentation/hwmon/k8temp.rst
index 72da12aa17e5..fe9109521056 100644
--- a/Documentation/hwmon/k8temp.rst
+++ b/Documentation/hwmon/k8temp.rst
@@ -9,7 +9,7 @@ Supported chips:
Addresses scanned: PCI space
- Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
+ Datasheet: http://www.amd.com/system/files/TechDocs/32559.pdf
Author: Rudolf Marek
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 70ae148ec980..2df5a3da563c 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -111,9 +111,11 @@ needed).
netlabel/index
networking/index
pcmcia/index
+ power/index
target/index
timers/index
watchdog/index
+ virtual/index
input/index
hwmon/index
gpu/index
@@ -143,6 +145,7 @@ implementation.
arm64/index
ia64/index
m68k/index
+ powerpc/index
riscv/index
s390/index
sh/index
diff --git a/Documentation/input/conf.py b/Documentation/input/conf.py
deleted file mode 100644
index d2352fdc92ed..000000000000
--- a/Documentation/input/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux input driver subsystem"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'linux-input.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/kernel-hacking/conf.py b/Documentation/kernel-hacking/conf.py
deleted file mode 100644
index 3d8acf0f33ad..000000000000
--- a/Documentation/kernel-hacking/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Kernel Hacking Guides"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'kernel-hacking.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/locking/spinlocks.rst b/Documentation/locking/spinlocks.rst
index 098107fb7d86..e93ec6645238 100644
--- a/Documentation/locking/spinlocks.rst
+++ b/Documentation/locking/spinlocks.rst
@@ -82,7 +82,7 @@ itself. The read lock allows many concurrent readers. Anything that
**changes** the list will have to get the write lock.
NOTE! RCU is better for list traversal, but requires careful
- attention to design detail (see Documentation/RCU/listRCU.txt).
+ attention to design detail (see Documentation/RCU/listRCU.rst).
Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
time need to do any changes (even if you don't do it every time), you have
@@ -90,7 +90,7 @@ to get the write-lock at the very beginning.
NOTE! We are working hard to remove reader-writer spinlocks in most
cases, so please don't add a new one without consensus. (Instead, see
- Documentation/RCU/rcu.txt for complete information.)
+ Documentation/RCU/rcu.rst for complete information.)
----
diff --git a/Documentation/maintainer/conf.py b/Documentation/maintainer/conf.py
deleted file mode 100644
index 81e9eb7a7884..000000000000
--- a/Documentation/maintainer/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Development Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'maintainer.tex', 'Linux Kernel Development Documentation',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/media/conf.py b/Documentation/media/conf.py
deleted file mode 100644
index 1f194fcd2cae..000000000000
--- a/Documentation/media/conf.py
+++ /dev/null
@@ -1,12 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-# SPDX-License-Identifier: GPL-2.0
-
-project = 'Linux Media Subsystem Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'media.tex', 'Linux Media Subsystem Documentation',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 045bb8148fe9..1adbb8a371c7 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -548,7 +548,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
[*] For information on bus mastering DMA and coherency please read:
- Documentation/PCI/pci.rst
+ Documentation/driver-api/pci/pci.rst
Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/networking/conf.py b/Documentation/networking/conf.py
deleted file mode 100644
index 40f69e67a883..000000000000
--- a/Documentation/networking/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Networking Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'networking.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst
index 048e5ca44824..b70b70dc4524 100644
--- a/Documentation/networking/tls-offload.rst
+++ b/Documentation/networking/tls-offload.rst
@@ -424,13 +424,24 @@ Statistics
Following minimum set of TLS-related statistics should be reported
by the driver:
- * ``rx_tls_decrypted`` - number of successfully decrypted TLS segments
- * ``tx_tls_encrypted`` - number of in-order TLS segments passed to device
- for encryption
+ * ``rx_tls_decrypted_packets`` - number of successfully decrypted RX packets
+ which were part of a TLS stream.
+ * ``rx_tls_decrypted_bytes`` - number of TLS payload bytes in RX packets
+ which were successfully decrypted.
+ * ``tx_tls_encrypted_packets`` - number of TX packets passed to the device
+ for encryption of their TLS payload.
+ * ``tx_tls_encrypted_bytes`` - number of TLS payload bytes in TX packets
+ passed to the device for encryption.
+ * ``tx_tls_ctx`` - number of TLS TX HW offload contexts added to device for
+ encryption.
* ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream
- but did not arrive in the expected order
- * ``tx_tls_drop_no_sync_data`` - number of TX packets dropped because
- they arrived out of order and associated record could not be found
+ but did not arrive in the expected order.
+ * ``tx_tls_drop_no_sync_data`` - number of TX packets which were part of
+ a TLS stream dropped, because they arrived out of order and associated
+ record could not be found.
+ * ``tx_tls_drop_bypass_req`` - number of TX packets which were part of a TLS
+ stream dropped, because they contain both data that has been encrypted by
+ software and data that expects hardware crypto offload.
Notable corner cases, exceptions and additional requirements
============================================================
diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst
index 20415f21e48a..002e42745263 100644
--- a/Documentation/power/index.rst
+++ b/Documentation/power/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
================
Power Management
diff --git a/Documentation/powerpc/bootwrapper.txt b/Documentation/powerpc/bootwrapper.rst
index d60fced5e1cc..a6292afba573 100644
--- a/Documentation/powerpc/bootwrapper.txt
+++ b/Documentation/powerpc/bootwrapper.rst
@@ -1,5 +1,7 @@
+========================
The PowerPC boot wrapper
-------------------------
+========================
+
Copyright (C) Secret Lab Technologies Ltd.
PowerPC image targets compresses and wraps the kernel image (vmlinux) with
@@ -21,6 +23,7 @@ it uses the wrapper script (arch/powerpc/boot/wrapper) to generate target
image. The details of the build system is discussed in the next section.
Currently, the following image format targets exist:
+ ==================== ========================================================
cuImage.%: Backwards compatible uImage for older version of
U-Boot (for versions that don't understand the device
tree). This image embeds a device tree blob inside
@@ -29,31 +32,36 @@ Currently, the following image format targets exist:
with boot wrapper code that extracts data from the old
bd_info structure and loads the data into the device
tree before jumping into the kernel.
- Because of the series of #ifdefs found in the
+
+ Because of the series of #ifdefs found in the
bd_info structure used in the old U-Boot interfaces,
cuImages are platform specific. Each specific
U-Boot platform has a different platform init file
which populates the embedded device tree with data
from the platform specific bd_info file. The platform
specific cuImage platform init code can be found in
- arch/powerpc/boot/cuboot.*.c. Selection of the correct
+ `arch/powerpc/boot/cuboot.*.c`. Selection of the correct
cuImage init code for a specific board can be found in
the wrapper structure.
+
dtbImage.%: Similar to zImage, except device tree blob is embedded
inside the image instead of provided by firmware. The
output image file can be either an elf file or a flat
binary depending on the platform.
- dtbImages are used on systems which do not have an
+
+ dtbImages are used on systems which do not have an
interface for passing a device tree directly.
dtbImages are similar to simpleImages except that
dtbImages have platform specific code for extracting
data from the board firmware, but simpleImages do not
talk to the firmware at all.
- PlayStation 3 support uses dtbImage. So do Embedded
+
+ PlayStation 3 support uses dtbImage. So do Embedded
Planet boards using the PlanetCore firmware. Board
specific initialization code is typically found in a
file named arch/powerpc/boot/<platform>.c; but this
can be overridden by the wrapper script.
+
simpleImage.%: Firmware independent compressed image that does not
depend on any particular firmware interface and embeds
a device tree blob. This image is a flat binary that
@@ -61,14 +69,16 @@ Currently, the following image format targets exist:
Firmware cannot pass any configuration data to the
kernel with this image type and it depends entirely on
the embedded device tree for all information.
- The simpleImage is useful for booting systems with
+
+ The simpleImage is useful for booting systems with
an unknown firmware interface or for booting from
a debugger when no firmware is present (such as on
the Xilinx Virtex platform). The only assumption that
simpleImage makes is that RAM is correctly initialized
and that the MMU is either off or has RAM mapped to
base address 0.
- simpleImage also supports inserting special platform
+
+ simpleImage also supports inserting special platform
specific initialization code to the start of the bootup
sequence. The virtex405 platform uses this feature to
ensure that the cache is invalidated before caching
@@ -81,9 +91,11 @@ Currently, the following image format targets exist:
named (virtex405-<board>.dts). Search the wrapper
script for 'virtex405' and see the file
arch/powerpc/boot/virtex405-head.S for details.
+
treeImage.%; Image format for used with OpenBIOS firmware found
on some ppc4xx hardware. This image embeds a device
tree blob inside the image.
+
uImage: Native image format used by U-Boot. The uImage target
does not add any boot code. It just wraps a compressed
vmlinux in the uImage data structure. This image
@@ -91,12 +103,14 @@ Currently, the following image format targets exist:
a device tree to the kernel at boot. If using an older
version of U-Boot, then you need to use a cuImage
instead.
+
zImage.%: Image format which does not embed a device tree.
Used by OpenFirmware and other firmware interfaces
which are able to supply a device tree. This image
expects firmware to provide the device tree at boot.
Typically, if you have general purpose PowerPC
hardware then you want this image format.
+ ==================== ========================================================
Image types which embed a device tree blob (simpleImage, dtbImage, treeImage,
and cuImage) all generate the device tree blob from a file in the
diff --git a/Documentation/powerpc/cpu_families.txt b/Documentation/powerpc/cpu_families.rst
index fc08e22feb1a..1e063c5440c3 100644
--- a/Documentation/powerpc/cpu_families.txt
+++ b/Documentation/powerpc/cpu_families.rst
@@ -1,3 +1,4 @@
+============
CPU Families
============
@@ -8,8 +9,8 @@ and are supported by arch/powerpc.
Book3S (aka sPAPR)
------------------
- - Hash MMU
- - Mix of 32 & 64 bit
+- Hash MMU
+- Mix of 32 & 64 bit::
+--------------+ +----------------+
| Old POWER | --------------> | RS64 (threads) |
@@ -108,8 +109,8 @@ Book3S (aka sPAPR)
IBM BookE
---------
- - Software loaded TLB.
- - All 32 bit
+- Software loaded TLB.
+- All 32 bit::
+--------------+
| 401 |
@@ -155,8 +156,8 @@ IBM BookE
Motorola/Freescale 8xx
----------------------
- - Software loaded with hardware assist.
- - All 32 bit
+- Software loaded with hardware assist.
+- All 32 bit::
+-------------+
| MPC8xx Core |
@@ -166,9 +167,9 @@ Motorola/Freescale 8xx
Freescale BookE
---------------
- - Software loaded TLB.
- - e6500 adds HW loaded indirect TLB entries.
- - Mix of 32 & 64 bit
+- Software loaded TLB.
+- e6500 adds HW loaded indirect TLB entries.
+- Mix of 32 & 64 bit::
+--------------+
| e200 |
@@ -207,8 +208,8 @@ Freescale BookE
IBM A2 core
-----------
- - Book3E, software loaded TLB + HW loaded indirect TLB entries.
- - 64 bit
+- Book3E, software loaded TLB + HW loaded indirect TLB entries.
+- 64 bit::
+--------------+ +----------------+
| A2 core | --> | WSP |
diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.rst
index ae09df8722c8..b7bcdd2f41bb 100644
--- a/Documentation/powerpc/cpu_features.txt
+++ b/Documentation/powerpc/cpu_features.rst
@@ -1,3 +1,7 @@
+============
+CPU Features
+============
+
Hollis Blanchard <hollis@austin.ibm.com>
5 Jun 2002
@@ -32,7 +36,7 @@ anyways).
After detecting the processor type, the kernel patches out sections of code
that shouldn't be used by writing nop's over it. Using cpufeatures requires
just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
-transfer_to_handler:
+transfer_to_handler::
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.rst
index c5e8d5098ed3..920546d81326 100644
--- a/Documentation/powerpc/cxl.txt
+++ b/Documentation/powerpc/cxl.rst
@@ -1,3 +1,4 @@
+====================================
Coherent Accelerator Interface (CXL)
====================================
@@ -21,6 +22,8 @@ Introduction
Hardware overview
=================
+ ::
+
POWER8/9 FPGA
+----------+ +---------+
| | | |
@@ -59,14 +62,16 @@ Hardware overview
the fault. The context to which this fault is serviced is based on
who owns that acceleration function.
- POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
- POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
+ - POWER8 and PSL Version 8 are compliant to the CAIA Version 1.0.
+ - POWER9 and PSL Version 9 are compliant to the CAIA Version 2.0.
+
This PSL Version 9 provides new features such as:
+
* Interaction with the nest MMU on the P9 chip.
* Native DMA support.
* Supports sending ASB_Notify messages for host thread wakeup.
* Supports Atomic operations.
- * ....
+ * etc.
Cards with a PSL9 won't work on a POWER8 system and cards with a
PSL8 won't work on a POWER9 system.
@@ -147,7 +152,9 @@ User API
master devices.
A userspace library libcxl is available here:
+
https://github.com/ibm-capi/libcxl
+
This provides a C interface to this kernel API.
open
@@ -165,7 +172,8 @@ open
When all available contexts are allocated the open call will fail
and return -ENOSPC.
- Note: IRQs need to be allocated for each context, which may limit
+ Note:
+ IRQs need to be allocated for each context, which may limit
the number of contexts that can be created, and therefore
how many times the device can be opened. The POWER8 CAPP
supports 2040 IRQs and 3 are used by the kernel, so 2037 are
@@ -186,7 +194,9 @@ ioctl
updated as userspace allocates and frees memory. This ioctl
returns once the AFU context is started.
- Takes a pointer to a struct cxl_ioctl_start_work:
+ Takes a pointer to a struct cxl_ioctl_start_work
+
+ ::
struct cxl_ioctl_start_work {
__u64 flags;
@@ -269,7 +279,7 @@ read
The buffer passed to read() must be at least 4K bytes.
The result of the read will be a buffer of one or more events,
- each event is of type struct cxl_event, of varying size.
+ each event is of type struct cxl_event, of varying size::
struct cxl_event {
struct cxl_event_header header;
@@ -280,7 +290,9 @@ read
};
};
- The struct cxl_event_header is defined as:
+ The struct cxl_event_header is defined as
+
+ ::
struct cxl_event_header {
__u16 type;
@@ -307,7 +319,9 @@ read
For future extensions and padding.
If the event type is CXL_EVENT_AFU_INTERRUPT then the event
- structure is defined as:
+ structure is defined as
+
+ ::
struct cxl_event_afu_interrupt {
__u16 flags;
@@ -326,7 +340,9 @@ read
For future extensions and padding.
If the event type is CXL_EVENT_DATA_STORAGE then the event
- structure is defined as:
+ structure is defined as
+
+ ::
struct cxl_event_data_storage {
__u16 flags;
@@ -356,7 +372,9 @@ read
For future extensions
If the event type is CXL_EVENT_AFU_ERROR then the event structure
- is defined as:
+ is defined as
+
+ ::
struct cxl_event_afu_error {
__u16 flags;
@@ -393,15 +411,15 @@ open
ioctl
-----
-CXL_IOCTL_DOWNLOAD_IMAGE:
-CXL_IOCTL_VALIDATE_IMAGE:
+CXL_IOCTL_DOWNLOAD_IMAGE / CXL_IOCTL_VALIDATE_IMAGE:
Starts and controls flashing a new FPGA image. Partial
reconfiguration is not supported (yet), so the image must contain
a copy of the PSL and AFU(s). Since an image can be quite large,
the caller may have to iterate, splitting the image in smaller
chunks.
- Takes a pointer to a struct cxl_adapter_image:
+ Takes a pointer to a struct cxl_adapter_image::
+
struct cxl_adapter_image {
__u64 flags;
__u64 data;
@@ -442,7 +460,7 @@ Udev rules
The following udev rules could be used to create a symlink to the
most logical chardev to use in any programming mode (afuX.Yd for
dedicated, afuX.Ys for afu directed), since the API is virtually
- identical for each:
+ identical for each::
SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b"
SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \
diff --git a/Documentation/powerpc/cxlflash.txt b/Documentation/powerpc/cxlflash.rst
index a64bdaa0a1cf..cea67931b3b9 100644
--- a/Documentation/powerpc/cxlflash.txt
+++ b/Documentation/powerpc/cxlflash.rst
@@ -1,3 +1,7 @@
+================================
+Coherent Accelerator (CXL) Flash
+================================
+
Introduction
============
@@ -28,7 +32,7 @@ Introduction
responsible for the initialization of the adapter, setting up the
special path for user space access, and performing error recovery. It
communicates directly the Flash Accelerator Functional Unit (AFU)
- as described in Documentation/powerpc/cxl.txt.
+ as described in Documentation/powerpc/cxl.rst.
The cxlflash driver supports two, mutually exclusive, modes of
operation at the device (LUN) level:
@@ -58,7 +62,7 @@ Overview
The CXL Flash Adapter Driver establishes a master context with the
AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
- Adapter Problem Space Memory Map looks like this:
+ Adapter Problem Space Memory Map looks like this::
+-------------------------------+
| 512 * 64 KB User MMIO |
@@ -375,7 +379,7 @@ CXL Flash Driver Host IOCTLs
Each host adapter instance that is supported by the cxlflash driver
has a special character device associated with it to enable a set of
host management function. These character devices are hosted in a
- class dedicated for cxlflash and can be accessed via /dev/cxlflash/*.
+ class dedicated for cxlflash and can be accessed via `/dev/cxlflash/*`.
Applications can be written to perform various functions using the
host ioctl APIs below.
diff --git a/Documentation/powerpc/DAWR-POWER9.txt b/Documentation/powerpc/dawr-power9.rst
index ecdbb076438c..c96ab6befd9c 100644
--- a/Documentation/powerpc/DAWR-POWER9.txt
+++ b/Documentation/powerpc/dawr-power9.rst
@@ -1,10 +1,11 @@
+=====================
DAWR issues on POWER9
-============================
+=====================
On POWER9 the Data Address Watchpoint Register (DAWR) can cause a checkstop
if it points to cache inhibited (CI) memory. Currently Linux has no way to
disinguish CI memory when configuring the DAWR, so (for now) the DAWR is
-disabled by this commit:
+disabled by this commit::
commit 9654153158d3e0684a1bdb76dbababdb7111d5a0
Author: Michael Neuling <mikey@neuling.org>
@@ -12,7 +13,7 @@ disabled by this commit:
powerpc: Disable DAWR in the base POWER9 CPU features
Technical Details:
-============================
+==================
DAWR has 6 different ways of being set.
1) ptrace
@@ -37,7 +38,7 @@ DAWR on the migration.
For xmon, the 'bd' command will return an error on P9.
Consequences for users
-============================
+======================
For GDB watchpoints (ie 'watch' command) on POWER9 bare metal , GDB
will accept the command. Unfortunately since there is no hardware
@@ -57,8 +58,8 @@ trapped in GDB. The watchpoint is remembered, so if the guest is
migrated back to the POWER8 host, it will start working again.
Force enabling the DAWR
-=============================
-Kernels (since ~v5.2) have an option to force enable the DAWR via:
+=======================
+Kernels (since ~v5.2) have an option to force enable the DAWR via::
echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
@@ -86,5 +87,7 @@ dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.
To double check the DAWR is working, run this kernel selftest:
+
tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
+
Any errors/failures/skips mean something is wrong.
diff --git a/Documentation/powerpc/dscr.txt b/Documentation/powerpc/dscr.rst
index ece300c64f76..2ab99006014c 100644
--- a/Documentation/powerpc/dscr.txt
+++ b/Documentation/powerpc/dscr.rst
@@ -1,5 +1,6 @@
- DSCR (Data Stream Control Register)
- ================================================
+===================================
+DSCR (Data Stream Control Register)
+===================================
DSCR register in powerpc allows user to have some control of prefetch of data
stream in the processor. Please refer to the ISA documents or related manual
@@ -10,14 +11,17 @@ user interface.
(A) Data Structures:
- (1) thread_struct:
+ (1) thread_struct::
+
dscr /* Thread DSCR value */
dscr_inherit /* Thread has changed default DSCR */
- (2) PACA:
+ (2) PACA::
+
dscr_default /* per-CPU DSCR default value */
- (3) sysfs.c:
+ (3) sysfs.c::
+
dscr_default /* System DSCR default value */
(B) Scheduler Changes:
@@ -35,8 +39,8 @@ user interface.
(C) SYSFS Interface:
- Global DSCR default: /sys/devices/system/cpu/dscr_default
- CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
+ - Global DSCR default: /sys/devices/system/cpu/dscr_default
+ - CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
Changing the global DSCR default in the sysfs will change all the CPU
specific DSCR defaults immediately in their PACA structures. Again if
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.rst
index 678189280bb4..438a87ebc095 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.rst
@@ -1,10 +1,10 @@
+==========================
+PCI Bus EEH Error Recovery
+==========================
+Linas Vepstas <linas@austin.ibm.com>
- PCI Bus EEH Error Recovery
- --------------------------
- Linas Vepstas
- <linas@austin.ibm.com>
- 12 January 2005
+12 January 2005
Overview:
@@ -143,17 +143,17 @@ seen in /proc/ppc64/eeh (subject to change). Normally, almost
all of these occur during boot, when the PCI bus is scanned, where
a large number of 0xff reads are part of the bus scan procedure.
-If a frozen slot is detected, code in
-arch/powerpc/platforms/pseries/eeh.c will print a stack trace to
-syslog (/var/log/messages). This stack trace has proven to be very
-useful to device-driver authors for finding out at what point the EEH
-error was detected, as the error itself usually occurs slightly
+If a frozen slot is detected, code in
+arch/powerpc/platforms/pseries/eeh.c will print a stack trace to
+syslog (/var/log/messages). This stack trace has proven to be very
+useful to device-driver authors for finding out at what point the EEH
+error was detected, as the error itself usually occurs slightly
beforehand.
Next, it uses the Linux kernel notifier chain/work queue mechanism to
allow any interested parties to find out about the failure. Device
drivers, or other parts of the kernel, can use
-eeh_register_notifier(struct notifier_block *) to find out about EEH
+`eeh_register_notifier(struct notifier_block *)` to find out about EEH
events. The event will include a pointer to the pci device, the
device node and some state info. Receivers of the event can "do as
they wish"; the default handler will be described further in this
@@ -162,10 +162,13 @@ section.
To assist in the recovery of the device, eeh.c exports the
following functions:
-rtas_set_slot_reset() -- assert the PCI #RST line for 1/8th of a second
-rtas_configure_bridge() -- ask firmware to configure any PCI bridges
+rtas_set_slot_reset()
+ assert the PCI #RST line for 1/8th of a second
+rtas_configure_bridge()
+ ask firmware to configure any PCI bridges
located topologically under the pci slot.
-eeh_save_bars() and eeh_restore_bars(): save and restore the PCI
+eeh_save_bars() and eeh_restore_bars():
+ save and restore the PCI
config-space info for a device and any devices under it.
@@ -191,7 +194,7 @@ events get delivered to user-space scripts.
Following is an example sequence of events that cause a device driver
close function to be called during the first phase of an EEH reset.
-The following sequence is an example of the pcnet32 device driver.
+The following sequence is an example of the pcnet32 device driver::
rpa_php_unconfig_pci_adapter (struct slot *) // in rpaphp_pci.c
{
@@ -241,53 +244,54 @@ The following sequence is an example of the pcnet32 device driver.
}}}}}}
- in drivers/pci/pci_driver.c,
- struct device_driver->remove() is just pci_device_remove()
- which calls struct pci_driver->remove() which is pcnet32_remove_one()
- which calls unregister_netdev() (in net/core/dev.c)
- which calls dev_close() (in net/core/dev.c)
- which calls dev->stop() which is pcnet32_close()
- which then does the appropriate shutdown.
+in drivers/pci/pci_driver.c,
+struct device_driver->remove() is just pci_device_remove()
+which calls struct pci_driver->remove() which is pcnet32_remove_one()
+which calls unregister_netdev() (in net/core/dev.c)
+which calls dev_close() (in net/core/dev.c)
+which calls dev->stop() which is pcnet32_close()
+which then does the appropriate shutdown.
---
+
Following is the analogous stack trace for events sent to user-space
-when the pci device is unconfigured.
+when the pci device is unconfigured::
-rpa_php_unconfig_pci_adapter() { // in rpaphp_pci.c
- calls
- pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
+ rpa_php_unconfig_pci_adapter() { // in rpaphp_pci.c
calls
- pci_destroy_dev (struct pci_dev *) {
+ pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
calls
- device_unregister (&dev->dev) { // in /drivers/base/core.c
+ pci_destroy_dev (struct pci_dev *) {
calls
- device_del(struct device * dev) { // in /drivers/base/core.c
+ device_unregister (&dev->dev) { // in /drivers/base/core.c
calls
- kobject_del() { //in /libs/kobject.c
+ device_del(struct device * dev) { // in /drivers/base/core.c
calls
- kobject_uevent() { // in /libs/kobject.c
+ kobject_del() { //in /libs/kobject.c
calls
- kset_uevent() { // in /lib/kobject.c
+ kobject_uevent() { // in /libs/kobject.c
calls
- kset->uevent_ops->uevent() // which is really just
- a call to
- dev_uevent() { // in /drivers/base/core.c
+ kset_uevent() { // in /lib/kobject.c
calls
- dev->bus->uevent() which is really just a call to
- pci_uevent () { // in drivers/pci/hotplug.c
- which prints device name, etc....
+ kset->uevent_ops->uevent() // which is really just
+ a call to
+ dev_uevent() { // in /drivers/base/core.c
+ calls
+ dev->bus->uevent() which is really just a call to
+ pci_uevent () { // in drivers/pci/hotplug.c
+ which prints device name, etc....
+ }
}
- }
- then kobject_uevent() sends a netlink uevent to userspace
- --> userspace uevent
- (during early boot, nobody listens to netlink events and
- kobject_uevent() executes uevent_helper[], which runs the
- event process /sbin/hotplug)
+ then kobject_uevent() sends a netlink uevent to userspace
+ --> userspace uevent
+ (during early boot, nobody listens to netlink events and
+ kobject_uevent() executes uevent_helper[], which runs the
+ event process /sbin/hotplug)
+ }
}
- }
- kobject_del() then calls sysfs_remove_dir(), which would
- trigger any user-space daemon that was watching /sysfs,
- and notice the delete event.
+ kobject_del() then calls sysfs_remove_dir(), which would
+ trigger any user-space daemon that was watching /sysfs,
+ and notice the delete event.
Pro's and Con's of the Current Design
@@ -299,12 +303,12 @@ individual device drivers, so that the current design throws a wide net.
The biggest negative of the design is that it potentially disturbs
network daemons and file systems that didn't need to be disturbed.
--- A minor complaint is that resetting the network card causes
+- A minor complaint is that resetting the network card causes
user-space back-to-back ifdown/ifup burps that potentially disturb
network daemons, that didn't need to even know that the pci
card was being rebooted.
--- A more serious concern is that the same reset, for SCSI devices,
+- A more serious concern is that the same reset, for SCSI devices,
causes havoc to mounted file systems. Scripts cannot post-facto
unmount a file system without flushing pending buffers, but this
is impossible, because I/O has already been stopped. Thus,
@@ -322,7 +326,7 @@ network daemons and file systems that didn't need to be disturbed.
from the block layer. It would be very natural to add an EEH
reset into this chain of events.
--- If a SCSI error occurs for the root device, all is lost unless
+- If a SCSI error occurs for the root device, all is lost unless
the sysadmin had the foresight to run /bin, /sbin, /etc, /var
and so on, out of ramdisk/tmpfs.
@@ -330,5 +334,3 @@ network daemons and file systems that didn't need to be disturbed.
Conclusions
-----------
There's forward progress ...
-
-
diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.rst
index 10e7f4d16c14..9ca12830a48e 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -1,7 +1,8 @@
+======================
+Firmware-Assisted Dump
+======================
- Firmware-Assisted Dump
- ------------------------
- July 2011
+July 2011
The goal of firmware-assisted dump is to enable the dump of
a crashed system, and to do so from a fully-reset system, and
@@ -27,11 +28,11 @@ in production use.
Comparing with kdump or other strategies, firmware-assisted
dump offers several strong, practical advantages:
--- Unlike kdump, the system has been reset, and loaded
+- Unlike kdump, the system has been reset, and loaded
with a fresh copy of the kernel. In particular,
PCI and I/O devices have been reinitialized and are
in a clean, consistent state.
--- Once the dump is copied out, the memory that held the dump
+- Once the dump is copied out, the memory that held the dump
is immediately available to the running kernel. And therefore,
unlike kdump, fadump doesn't need a 2nd reboot to get back
the system to the production configuration.
@@ -40,17 +41,18 @@ The above can only be accomplished by coordination with,
and assistance from the Power firmware. The procedure is
as follows:
--- The first kernel registers the sections of memory with the
+- The first kernel registers the sections of memory with the
Power firmware for dump preservation during OS initialization.
These registered sections of memory are reserved by the first
kernel during early boot.
--- When a system crashes, the Power firmware will save
+- When a system crashes, the Power firmware will save
the low memory (boot memory of size larger of 5% of system RAM
or 256MB) of RAM to the previous registered region. It will
also save system registers, and hardware PTE's.
- NOTE: The term 'boot memory' means size of the low memory chunk
+ NOTE:
+ The term 'boot memory' means size of the low memory chunk
that is required for a kernel to boot successfully when
booted with restricted memory. By default, the boot memory
size will be the larger of 5% of system RAM or 256MB.
@@ -64,12 +66,12 @@ as follows:
as fadump uses a predefined offset to reserve memory
for boot memory dump preservation in case of a crash.
--- After the low memory (boot memory) area has been saved, the
+- After the low memory (boot memory) area has been saved, the
firmware will reset PCI and other hardware state. It will
*not* clear the RAM. It will then launch the bootloader, as
normal.
--- The freshly booted kernel will notice that there is a new
+- The freshly booted kernel will notice that there is a new
node (ibm,dump-kernel) in the device tree, indicating that
there is crash data available from a previous boot. During
the early boot OS will reserve rest of the memory above
@@ -77,17 +79,18 @@ as follows:
size. This will make sure that the second kernel will not
touch any of the dump memory area.
--- User-space tools will read /proc/vmcore to obtain the contents
+- User-space tools will read /proc/vmcore to obtain the contents
of memory, which holds the previous crashed kernel dump in ELF
format. The userspace tools may copy this info to disk, or
network, nas, san, iscsi, etc. as desired.
--- Once the userspace tool is done saving dump, it will echo
+- Once the userspace tool is done saving dump, it will echo
'1' to /sys/kernel/fadump_release_mem to release the reserved
memory back to general use, except the memory required for
next firmware-assisted dump registration.
- e.g.
+ e.g.::
+
# echo 1 > /sys/kernel/fadump_release_mem
Please note that the firmware-assisted dump feature
@@ -95,7 +98,7 @@ is only available on Power6 and above systems with recent
firmware versions.
Implementation details:
-----------------------
+-----------------------
During boot, a check is made to see if firmware supports
this feature on that particular machine. If it does, then
@@ -121,7 +124,7 @@ Allocator (CMA) for memory reservation if CMA is configured for kernel.
With CMA reservation this memory will be available for applications to
use it, while kernel is prevented from using it. With this fadump will
still be able to capture all of the kernel memory and most of the user
-space memory except the user pages that were present in CMA region.
+space memory except the user pages that were present in CMA region::
o Memory Reservation during first kernel
@@ -166,7 +169,7 @@ The tools to examine the dump will be same as the ones
used for kdump.
How to enable firmware-assisted dump (fadump):
--------------------------------------
+----------------------------------------------
1. Set config option CONFIG_FA_DUMP=y and build kernel.
2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
@@ -177,19 +180,20 @@ How to enable firmware-assisted dump (fadump):
to specify size of the memory to reserve for boot memory dump
preservation.
-NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
- use 'crashkernel=' to specify size of the memory to reserve
- for boot memory dump preservation.
- 2. If firmware-assisted dump fails to reserve memory then it
- will fallback to existing kdump mechanism if 'crashkernel='
- option is set at kernel cmdline.
- 3. if user wants to capture all of user space memory and ok with
- reserved memory not available to production system, then
- 'fadump=nocma' kernel parameter can be used to fallback to
- old behaviour.
+NOTE:
+ 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
+ use 'crashkernel=' to specify size of the memory to reserve
+ for boot memory dump preservation.
+ 2. If firmware-assisted dump fails to reserve memory then it
+ will fallback to existing kdump mechanism if 'crashkernel='
+ option is set at kernel cmdline.
+ 3. if user wants to capture all of user space memory and ok with
+ reserved memory not available to production system, then
+ 'fadump=nocma' kernel parameter can be used to fallback to
+ old behaviour.
Sysfs/debugfs files:
-------------
+--------------------
Firmware-assisted dump feature uses sysfs file system to hold
the control files and debugfs file to display memory reserved region.
@@ -197,20 +201,20 @@ the control files and debugfs file to display memory reserved region.
Here is the list of files under kernel sysfs:
/sys/kernel/fadump_enabled
-
This is used to display the fadump status.
- 0 = fadump is disabled
- 1 = fadump is enabled
+
+ - 0 = fadump is disabled
+ - 1 = fadump is enabled
This interface can be used by kdump init scripts to identify if
fadump is enabled in the kernel and act accordingly.
/sys/kernel/fadump_registered
-
This is used to display the fadump registration status as well
as to control (start/stop) the fadump registration.
- 0 = fadump is not registered.
- 1 = fadump is registered and ready to handle system crash.
+
+ - 0 = fadump is not registered.
+ - 1 = fadump is registered and ready to handle system crash.
To register fadump echo 1 > /sys/kernel/fadump_registered and
echo 0 > /sys/kernel/fadump_registered for un-register and stop the
@@ -219,13 +223,12 @@ Here is the list of files under kernel sysfs:
easily integrated with kdump service start/stop.
/sys/kernel/fadump_release_mem
-
This file is available only when fadump is active during
second kernel. This is used to release the reserved memory
region that are held for saving crash dump. To release the
- reserved memory echo 1 to it:
+ reserved memory echo 1 to it::
- echo 1 > /sys/kernel/fadump_release_mem
+ echo 1 > /sys/kernel/fadump_release_mem
After echo 1, the content of the /sys/kernel/debug/powerpc/fadump_region
file will change to reflect the new memory reservations.
@@ -238,38 +241,39 @@ Here is the list of files under powerpc debugfs:
(Assuming debugfs is mounted on /sys/kernel/debug directory.)
/sys/kernel/debug/powerpc/fadump_region
-
This file shows the reserved memory regions if fadump is
enabled otherwise this file is empty. The output format
- is:
- <region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
+ is::
+
+ <region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
e.g.
- Contents when fadump is registered during first kernel
+ Contents when fadump is registered during first kernel::
- # cat /sys/kernel/debug/powerpc/fadump_region
- CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
- HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
- DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
+ # cat /sys/kernel/debug/powerpc/fadump_region
+ CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
+ HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
+ DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
- Contents when fadump is active during second kernel
+ Contents when fadump is active during second kernel::
- # cat /sys/kernel/debug/powerpc/fadump_region
- CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
- HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
- DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
- : [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
+ # cat /sys/kernel/debug/powerpc/fadump_region
+ CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
+ HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
+ DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
+ : [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
-NOTE: Please refer to Documentation/filesystems/debugfs.txt on
+NOTE:
+ Please refer to Documentation/filesystems/debugfs.txt on
how to mount the debugfs filesystem.
TODO:
-----
- o Need to come up with the better approach to find out more
+ - Need to come up with the better approach to find out more
accurate boot memory size that is required for a kernel to
boot successfully when booted with restricted memory.
- o The fadump implementation introduces a fadump crash info structure
+ - The fadump implementation introduces a fadump crash info structure
in the scratch area before the ELF core header. The idea of introducing
this structure is to pass some important crash info data to the second
kernel which will help second kernel to populate ELF core header with
@@ -277,7 +281,9 @@ TODO:
design implementation does not address a possibility of introducing
additional fields (in future) to this structure without affecting
compatibility. Need to come up with the better approach to address this.
+
The possible approaches are:
+
1. Introduce version field for version tracking, bump up the version
whenever a new field is added to the structure in future. The version
field can be used to find out what fields are valid for the current
@@ -285,8 +291,11 @@ TODO:
2. Reserve the area of predefined size (say PAGE_SIZE) for this
structure and have unused area as reserved (initialized to zero)
for future field additions.
+
The advantage of approach 1 over 2 is we don't need to reserve extra space.
----
+
Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
+
This document is based on the original documentation written for phyp
+
assisted dump by Linas Vepstas and Manish Ahuja.
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.rst
index a730ca5a07f8..6808acde672f 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.rst
@@ -1,19 +1,22 @@
-===========================================================================
- HVCS
- IBM "Hypervisor Virtual Console Server" Installation Guide
- for Linux Kernel 2.6.4+
- Copyright (C) 2004 IBM Corporation
+===============================================================
+HVCS IBM "Hypervisor Virtual Console Server" Installation Guide
+===============================================================
-===========================================================================
-NOTE:Eight space tabs are the optimum editor setting for reading this file.
-===========================================================================
+for Linux Kernel 2.6.4+
- Author(s) : Ryan S. Arnold <rsa@us.ibm.com>
- Date Created: March, 02, 2004
- Last Changed: August, 24, 2004
+Copyright (C) 2004 IBM Corporation
----------------------------------------------------------------------------
-Table of contents:
+.. ===========================================================================
+.. NOTE:Eight space tabs are the optimum editor setting for reading this file.
+.. ===========================================================================
+
+
+Author(s): Ryan S. Arnold <rsa@us.ibm.com>
+
+Date Created: March, 02, 2004
+Last Changed: August, 24, 2004
+
+.. Table of contents:
1. Driver Introduction:
2. System Requirements
@@ -27,8 +30,8 @@ Table of contents:
8. Questions & Answers:
9. Reporting Bugs:
----------------------------------------------------------------------------
1. Driver Introduction:
+=======================
This is the device driver for the IBM Hypervisor Virtual Console Server,
"hvcs". The IBM hvcs provides a tty driver interface to allow Linux user
@@ -38,8 +41,8 @@ ppc64 system. Physical hardware consoles per partition are not practical
on this hardware so system consoles are accessed by this driver using
firmware interfaces to virtual terminal devices.
----------------------------------------------------------------------------
2. System Requirements:
+=======================
This device driver was written using 2.6.4 Linux kernel APIs and will only
build and run on kernels of this version or later.
@@ -52,8 +55,8 @@ Sysfs must be mounted on the system so that the user can determine which
major and minor numbers are associated with each vty-server. Directions
for sysfs mounting are outside the scope of this document.
----------------------------------------------------------------------------
3. Build Options:
+=================
The hvcs driver registers itself as a tty driver. The tty layer
dynamically allocates a block of major and minor numbers in a quantity
@@ -65,11 +68,11 @@ If the default number of device entries is adequate then this driver can be
built into the kernel. If not, the default can be over-ridden by inserting
the driver as a module with insmod parameters.
----------------------------------------------------------------------------
3.1 Built-in:
+-------------
The following menuconfig example demonstrates selecting to build this
-driver into the kernel.
+driver into the kernel::
Device Drivers --->
Character devices --->
@@ -77,11 +80,11 @@ driver into the kernel.
Begin the kernel make process.
----------------------------------------------------------------------------
3.2 Module:
+-----------
The following menuconfig example demonstrates selecting to build this
-driver as a kernel module.
+driver as a kernel module::
Device Drivers --->
Character devices --->
@@ -89,11 +92,11 @@ driver as a kernel module.
The make process will build the following kernel modules:
- hvcs.ko
- hvcserver.ko
+ - hvcs.ko
+ - hvcserver.ko
To insert the module with the default allocation execute the following
-commands in the order they appear:
+commands in the order they appear::
insmod hvcserver.ko
insmod hvcs.ko
@@ -103,7 +106,7 @@ be inserted first, otherwise the hvcs module will not find some of the
symbols it expects.
To override the default use an insmod parameter as follows (requesting 4
-tty devices as an example):
+tty devices as an example)::
insmod hvcs.ko hvcs_parm_num_devs=4
@@ -115,31 +118,31 @@ source file before building.
NOTE: The length of time it takes to insmod the driver seems to be related
to the number of tty interfaces the registering driver requests.
-In order to remove the driver module execute the following command:
+In order to remove the driver module execute the following command::
rmmod hvcs.ko
The recommended method for installing hvcs as a module is to use depmod to
build a current modules.dep file in /lib/modules/`uname -r` and then
-execute:
+execute::
-modprobe hvcs hvcs_parm_num_devs=4
+ modprobe hvcs hvcs_parm_num_devs=4
The modules.dep file indicates that hvcserver.ko needs to be inserted
before hvcs.ko and modprobe uses this file to smartly insert the modules in
the proper order.
The following modprobe command is used to remove hvcs and hvcserver in the
-proper order:
+proper order::
-modprobe -r hvcs
+ modprobe -r hvcs
----------------------------------------------------------------------------
4. Installation:
+================
The tty layer creates sysfs entries which contain the major and minor
numbers allocated for the hvcs driver. The following snippet of "tree"
-output of the sysfs directory shows where these numbers are presented:
+output of the sysfs directory shows where these numbers are presented::
sys/
|-- *other sysfs base dirs*
@@ -164,7 +167,7 @@ output of the sysfs directory shows where these numbers are presented:
|-- *other sysfs base dirs*
For the above examples the following output is a result of cat'ing the
-"dev" entry in the hvcs directory:
+"dev" entry in the hvcs directory::
Pow5:/sys/class/tty/hvcs0/ # cat dev
254:0
@@ -184,7 +187,7 @@ systems running hvcs will already have the device entries created or udev
will do it automatically.
Given the example output above, to manually create a /dev/hvcs* node entry
-mknod can be used as follows:
+mknod can be used as follows::
mknod /dev/hvcs0 c 254 0
mknod /dev/hvcs1 c 254 1
@@ -195,15 +198,15 @@ Using mknod to manually create the device entries makes these device nodes
persistent. Once created they will exist prior to the driver insmod.
Attempting to connect an application to /dev/hvcs* prior to insertion of
-the hvcs module will result in an error message similar to the following:
+the hvcs module will result in an error message similar to the following::
"/dev/hvcs*: No such device".
NOTE: Just because there is a device node present doesn't mean that there
is a vty-server device configured for that node.
----------------------------------------------------------------------------
5. Connection
+=============
Since this driver controls devices that provide a tty interface a user can
interact with the device node entries using any standard tty-interactive
@@ -249,7 +252,7 @@ vty-server adapter is associated with which /dev/hvcs* node a special sysfs
attribute has been added to each vty-server sysfs entry. This entry is
called "index" and showing it reveals an integer that refers to the
/dev/hvcs* entry to use to connect to that device. For instance cating the
-index attribute of vty-server adapter 30000004 shows the following.
+index attribute of vty-server adapter 30000004 shows the following::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat index
2
@@ -262,8 +265,8 @@ system the /dev/hvcs* entry that interacts with a particular vty-server
adapter is not guaranteed to remain the same across system reboots. Look
in the Q & A section for more on this issue.
----------------------------------------------------------------------------
6. Disconnection
+================
As a security feature to prevent the delivery of stale data to an
unintended target the Power5 system firmware disables the fetching of data
@@ -305,7 +308,7 @@ connection between the vty-server and target vty ONLY if the vterm_state
previously read '1'. The write directive is ignored if the vterm_state
read '0' or if any value other than '0' was written to the vterm_state
attribute. The following example will show the method used for verifying
-the vty-server connection status and disconnecting a vty-server connection.
+the vty-server connection status and disconnecting a vty-server connection::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
1
@@ -318,12 +321,12 @@ the vty-server connection status and disconnecting a vty-server connection.
All vty-server connections are automatically terminated when the device is
hotplug removed and when the module is removed.
----------------------------------------------------------------------------
7. Configuration
+================
Each vty-server has a sysfs entry in the /sys/devices/vio directory, which
is symlinked in several other sysfs tree directories, notably under the
-hvcs driver entry, which looks like the following example:
+hvcs driver entry, which looks like the following example::
Pow5:/sys/bus/vio/drivers/hvcs # ls
. .. 30000003 30000004 rescan
@@ -344,7 +347,7 @@ completed or was never executed.
Vty-server entries in this directory are a 32 bit partition unique unit
address that is created by firmware. An example vty-server sysfs entry
-looks like the following:
+looks like the following::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
. current_vty devspec name partner_vtys
@@ -352,21 +355,21 @@ looks like the following:
Each entry is provided, by default with a "name" attribute. Reading the
"name" attribute will reveal the device type as shown in the following
-example:
+example::
Pow5:/sys/bus/vio/drivers/hvcs/30000003 # cat name
vty-server
Each entry is also provided, by default, with a "devspec" attribute which
reveals the full device specification when read, as shown in the following
-example:
+example::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat devspec
/vdevice/vty-server@30000004
Each vty-server sysfs dir is provided with two read-only attributes that
provide lists of easily parsed partner vty data: "partner_vtys" and
-"partner_clcs".
+"partner_clcs"::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_vtys
30000000
@@ -396,7 +399,7 @@ A vty-server can only be connected to a single vty at a time. The entry,
read.
The current_vty can be changed by writing a valid partner clc to the entry
-as in the following example:
+as in the following example::
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo U5112.428.10304
8A-V4-C0 > current_vty
@@ -408,9 +411,9 @@ currently open connection is freed.
Information on the "vterm_state" attribute was covered earlier on the
chapter entitled "disconnection".
----------------------------------------------------------------------------
8. Questions & Answers:
-===========================================================================
+=======================
+
Q: What are the security concerns involving hvcs?
A: There are three main security concerns:
@@ -429,6 +432,7 @@ A: There are three main security concerns:
partition) will experience the previously logged in session.
---------------------------------------------------------------------------
+
Q: How do I multiplex a console that I grab through hvcs so that other
people can see it:
@@ -440,6 +444,7 @@ term type "screen" to others. This means that curses based programs may
not display properly in screen sessions.
---------------------------------------------------------------------------
+
Q: Why are the colors all messed up?
Q: Why are the control characters acting strange or not working?
Q: Why is the console output all strange and unintelligible?
@@ -455,6 +460,7 @@ disconnect from the console. This will ensure that the next user gets
their own TERM type set when they login.
---------------------------------------------------------------------------
+
Q: When I try to CONNECT kermit to an hvcs device I get:
"Sorry, can't open connection: /dev/hvcs*"What is happening?
@@ -490,6 +496,7 @@ A: There is not a corresponding vty-server device that maps to an existing
/dev/hvcs* entry.
---------------------------------------------------------------------------
+
Q: When I try to CONNECT kermit to an hvcs device I get:
"Sorry, write access to UUCP lockfile directory denied."
@@ -497,6 +504,7 @@ A: The /dev/hvcs* entry you have specified doesn't exist where you said it
does? Maybe you haven't inserted the module (on systems with udev).
---------------------------------------------------------------------------
+
Q: If I already have one Linux partition installed can I use hvcs on said
partition to provide the console for the install of a second Linux
partition?
@@ -505,6 +513,7 @@ A: Yes granted that your are connected to the /dev/hvcs* device using
kermit or cu or some other program that doesn't provide terminal emulation.
---------------------------------------------------------------------------
+
Q: Can I connect to more than one partition's console at a time using this
driver?
@@ -512,6 +521,7 @@ A: Yes. Of course this means that there must be more than one vty-server
configured for this partition and each must point to a disconnected vty.
---------------------------------------------------------------------------
+
Q: Does the hvcs driver support dynamic (hotplug) addition of devices?
A: Yes, if you have dlpar and hotplug enabled for your system and it has
@@ -519,6 +529,7 @@ been built into the kernel the hvcs drivers is configured to dynamically
handle additions of new devices and removals of unused devices.
---------------------------------------------------------------------------
+
Q: For some reason /dev/hvcs* doesn't map to the same vty-server adapter
after a reboot. What happened?
@@ -533,6 +544,7 @@ on how to determine which vty-server goes with which /dev/hvcs* node.
Hint; look at the sysfs "index" attribute for the vty-server.
---------------------------------------------------------------------------
+
Q: Can I use /dev/hvcs* as a conduit to another partition and use a tty
device on that partition as the other end of the pipe?
@@ -554,7 +566,9 @@ read or write to /dev/hvcs*. Now you have a tty conduit between two
partitions.
---------------------------------------------------------------------------
+
9. Reporting Bugs:
+==================
The proper channel for reporting bugs is either through the Linux OS
distribution company that provided your OS or by posting issues to the
diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst
new file mode 100644
index 000000000000..549b1cdd77ae
--- /dev/null
+++ b/Documentation/powerpc/index.rst
@@ -0,0 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+powerpc
+=======
+
+.. toctree::
+ :maxdepth: 1
+
+ bootwrapper
+ cpu_families
+ cpu_features
+ cxl
+ cxlflash
+ dawr-power9
+ dscr
+ eeh-pci-error-recovery
+ firmware-assisted-dump
+ hvcs
+ isa-versions
+ mpc52xx
+ pci_iov_resource_on_powernv
+ pmu-ebb
+ ptrace
+ qe_firmware
+ syscall64-abi
+ transactional_memory
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/powerpc/isa-versions.rst b/Documentation/powerpc/isa-versions.rst
index 66c24140ebf1..a363d8c1603c 100644
--- a/Documentation/powerpc/isa-versions.rst
+++ b/Documentation/powerpc/isa-versions.rst
@@ -1,13 +1,12 @@
-:orphan:
-
+==========================
CPU to ISA Version Mapping
==========================
Mapping of some CPU versions to relevant ISA versions.
-========= ====================
+========= ====================================================================
CPU Architecture version
-========= ====================
+========= ====================================================================
Power9 Power ISA v3.0B
Power8 Power ISA v2.07
Power7 Power ISA v2.06
@@ -24,7 +23,7 @@ PPC970 - PowerPC User Instruction Set Architecture Book I v2.01
- PowerPC Virtual Environment Architecture Book II v2.01
- PowerPC Operating Environment Architecture Book III v2.01
- Plus Altivec/VMX ~= 2.03
-========= ====================
+========= ====================================================================
Key Features
@@ -60,9 +59,9 @@ Power5 No
PPC970 No
========== ====
-========== ====================
+========== ====================================
CPU Transactional Memory
-========== ====================
+========== ====================================
Power9 Yes (* see transactional_memory.txt)
Power8 Yes
Power7 No
@@ -73,4 +72,4 @@ Power5++ No
Power5+ No
Power5 No
PPC970 No
-========== ====================
+========== ====================================
diff --git a/Documentation/powerpc/mpc52xx.txt b/Documentation/powerpc/mpc52xx.rst
index 0d540a31ea1a..8676ac63e077 100644
--- a/Documentation/powerpc/mpc52xx.txt
+++ b/Documentation/powerpc/mpc52xx.rst
@@ -1,11 +1,13 @@
+=============================
Linux 2.6.x on MPC52xx family
------------------------------
+=============================
For the latest info, go to http://www.246tNt.com/mpc52xx/
To compile/use :
- - U-Boot:
+ - U-Boot::
+
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
@@ -16,7 +18,8 @@ To compile/use :
=> tftpboot 400000 pRamdisk
=> bootm 200000 400000
- - DBug:
+ - DBug::
+
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
@@ -28,7 +31,8 @@ To compile/use :
DBug> dn -i zImage.initrd.lite5200
-Some remarks :
+Some remarks:
+
- The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
is not supported, and I'm not sure anyone is interesting in working on it
so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
diff --git a/Documentation/powerpc/pci_iov_resource_on_powernv.txt b/Documentation/powerpc/pci_iov_resource_on_powernv.rst
index b55c5cd83f8d..f5a5793e1613 100644
--- a/Documentation/powerpc/pci_iov_resource_on_powernv.txt
+++ b/Documentation/powerpc/pci_iov_resource_on_powernv.rst
@@ -1,6 +1,13 @@
+===================================================
+PCI Express I/O Virtualization Resource on Powerenv
+===================================================
+
Wei Yang <weiyang@linux.vnet.ibm.com>
+
Benjamin Herrenschmidt <benh@au1.ibm.com>
+
Bjorn Helgaas <bhelgaas@google.com>
+
26 Aug 2014
This document describes the requirement from hardware for PCI MMIO resource
@@ -10,6 +17,7 @@ Endpoints and the implementation on P8 (IODA2). The next two sections talks
about considerations on enabling SRIOV on IODA2.
1. Introduction to Partitionable Endpoints
+==========================================
A Partitionable Endpoint (PE) is a way to group the various resources
associated with a device or a set of devices to provide isolation between
@@ -35,6 +43,7 @@ is a completely separate HW entity that replicates the entire logic, so has
its own set of PEs, etc.
2. Implementation of Partitionable Endpoints on P8 (IODA2)
+==========================================================
P8 supports up to 256 Partitionable Endpoints per PHB.
@@ -149,6 +158,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
sense, but we haven't done it yet.
3. Considerations for SR-IOV on PowerKVM
+========================================
* SR-IOV Background
@@ -224,7 +234,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
IODA supports 256 PEs, so segmented windows contain 256 segments, so if
total_VFs is less than 256, we have the situation in Figure 1.0, where
segments [total_VFs, 255] of the M64 window may map to some MMIO range on
- other devices:
+ other devices::
0 1 total_VFs - 1
+------+------+- -+------+------+
@@ -243,7 +253,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
Figure 1.0 Direct map VF(n) BAR space
Our current solution is to allocate 256 segments even if the VF(n) BAR
- space doesn't need that much, as shown in Figure 1.1:
+ space doesn't need that much, as shown in Figure 1.1::
0 1 total_VFs - 1 255
+------+------+- -+------+------+- -+------+------+
@@ -269,6 +279,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
responds to segments [total_VFs, 255].
4. Implications for the Generic PCI Code
+========================================
The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be
aligned to the size of an individual VF BAR.
diff --git a/Documentation/powerpc/pmu-ebb.txt b/Documentation/powerpc/pmu-ebb.rst
index 73cd163dbfb8..4f474758eb55 100644
--- a/Documentation/powerpc/pmu-ebb.txt
+++ b/Documentation/powerpc/pmu-ebb.rst
@@ -1,3 +1,4 @@
+========================
PMU Event Based Branches
========================
diff --git a/Documentation/powerpc/ptrace.rst b/Documentation/powerpc/ptrace.rst
new file mode 100644
index 000000000000..864d4b6dddd1
--- /dev/null
+++ b/Documentation/powerpc/ptrace.rst
@@ -0,0 +1,156 @@
+======
+Ptrace
+======
+
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+============================
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process::
+
+ struct ppc_debug_info {
+ unit32_t version;
+ unit32_t num_instruction_bps;
+ unit32_t num_data_bps;
+ unit32_t num_condition_regs;
+ unit32_t data_bp_alignment;
+ unit32_t sizeof_condition; /* size of the DVC register */
+ uint64_t features; /* bitmask of the individual flags */
+ };
+
+features will have bits indicating whether there is support for::
+
+ #define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
+ #define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
+ #define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
+ #define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
+ #define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure::
+
+ struct ppc_hw_breakpoint {
+ uint32_t version;
+ #define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
+ #define PPC_BREAKPOINT_TRIGGER_READ 0x2
+ #define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
+ uint32_t trigger_type; /* only some combinations allowed */
+ #define PPC_BREAKPOINT_MODE_EXACT 0x0
+ #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
+ #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
+ #define PPC_BREAKPOINT_MODE_MASK 0x3
+ uint32_t addr_mode; /* address match mode */
+
+ #define PPC_BREAKPOINT_CONDITION_MODE 0x3
+ #define PPC_BREAKPOINT_CONDITION_NONE 0x0
+ #define PPC_BREAKPOINT_CONDITION_AND 0x1
+ #define PPC_BREAKPOINT_CONDITION_EXACT 0x1 /* different name for the same thing as above */
+ #define PPC_BREAKPOINT_CONDITION_OR 0x2
+ #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+ #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 /* byte enable bits */
+ #define PPC_BREAKPOINT_CONDITION_BE(n) (1<<((n)+16))
+ uint32_t condition_mode; /* break/watchpoint condition flags */
+
+ uint64_t addr;
+ uint64_t addr2;
+ uint64_t condition_value;
+ };
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
+- set a watchpoint in server processors (BookS)::
+
+ p.version = 1;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ or
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+ * addr2 - addr <= 8 Bytes.
+ */
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
deleted file mode 100644
index 99c5ce88d0fe..000000000000
--- a/Documentation/powerpc/ptrace.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-GDB intends to support the following hardware debug features of BookE
-processors:
-
-4 hardware breakpoints (IAC)
-2 hardware watchpoints (read, write and read-write) (DAC)
-2 value conditions for the hardware watchpoints (DVC)
-
-For that, we need to extend ptrace so that GDB can query and set these
-resources. Since we're extending, we're trying to create an interface
-that's extendable and that covers both BookE and server processors, so
-that GDB doesn't need to special-case each of them. We added the
-following 3 new ptrace requests.
-
-1. PTRACE_PPC_GETHWDEBUGINFO
-
-Query for GDB to discover the hardware debug features. The main info to
-be returned here is the minimum alignment for the hardware watchpoints.
-BookE processors don't have restrictions here, but server processors have
-an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
-adding special cases to GDB based on what it sees in AUXV.
-
-Since we're at it, we added other useful info that the kernel can return to
-GDB: this query will return the number of hardware breakpoints, hardware
-watchpoints and whether it supports a range of addresses and a condition.
-The query will fill the following structure provided by the requesting process:
-
-struct ppc_debug_info {
- unit32_t version;
- unit32_t num_instruction_bps;
- unit32_t num_data_bps;
- unit32_t num_condition_regs;
- unit32_t data_bp_alignment;
- unit32_t sizeof_condition; /* size of the DVC register */
- uint64_t features; /* bitmask of the individual flags */
-};
-
-features will have bits indicating whether there is support for:
-
-#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
-#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
-#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
-#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
-#define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10
-
-2. PTRACE_SETHWDEBUG
-
-Sets a hardware breakpoint or watchpoint, according to the provided structure:
-
-struct ppc_hw_breakpoint {
- uint32_t version;
-#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
-#define PPC_BREAKPOINT_TRIGGER_READ 0x2
-#define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
- uint32_t trigger_type; /* only some combinations allowed */
-#define PPC_BREAKPOINT_MODE_EXACT 0x0
-#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
-#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
-#define PPC_BREAKPOINT_MODE_MASK 0x3
- uint32_t addr_mode; /* address match mode */
-
-#define PPC_BREAKPOINT_CONDITION_MODE 0x3
-#define PPC_BREAKPOINT_CONDITION_NONE 0x0
-#define PPC_BREAKPOINT_CONDITION_AND 0x1
-#define PPC_BREAKPOINT_CONDITION_EXACT 0x1 /* different name for the same thing as above */
-#define PPC_BREAKPOINT_CONDITION_OR 0x2
-#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
-#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 /* byte enable bits */
-#define PPC_BREAKPOINT_CONDITION_BE(n) (1<<((n)+16))
- uint32_t condition_mode; /* break/watchpoint condition flags */
-
- uint64_t addr;
- uint64_t addr2;
- uint64_t condition_value;
-};
-
-A request specifies one event, not necessarily just one register to be set.
-For instance, if the request is for a watchpoint with a condition, both the
-DAC and DVC registers will be set in the same request.
-
-With this GDB can ask for all kinds of hardware breakpoints and watchpoints
-that the BookE supports. COMEFROM breakpoints available in server processors
-are not contemplated, but that is out of the scope of this work.
-
-ptrace will return an integer (handle) uniquely identifying the breakpoint or
-watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
-request to ask for its removal. Return -ENOSPC if the requested breakpoint
-can't be allocated on the registers.
-
-Some examples of using the structure to:
-
-- set a breakpoint in the first breakpoint register
-
- p.version = PPC_DEBUG_CURRENT_VERSION;
- p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
- p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
- p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
- p.addr = (uint64_t) address;
- p.addr2 = 0;
- p.condition_value = 0;
-
-- set a watchpoint which triggers on reads in the second watchpoint register
-
- p.version = PPC_DEBUG_CURRENT_VERSION;
- p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
- p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
- p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
- p.addr = (uint64_t) address;
- p.addr2 = 0;
- p.condition_value = 0;
-
-- set a watchpoint which triggers only with a specific value
-
- p.version = PPC_DEBUG_CURRENT_VERSION;
- p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
- p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
- p.condition_mode = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
- p.addr = (uint64_t) address;
- p.addr2 = 0;
- p.condition_value = (uint64_t) condition;
-
-- set a ranged hardware breakpoint
-
- p.version = PPC_DEBUG_CURRENT_VERSION;
- p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
- p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
- p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
- p.addr = (uint64_t) begin_range;
- p.addr2 = (uint64_t) end_range;
- p.condition_value = 0;
-
-- set a watchpoint in server processors (BookS)
-
- p.version = 1;
- p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
- p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
- or
- p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
-
- p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
- p.addr = (uint64_t) begin_range;
- /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
- * addr2 - addr <= 8 Bytes.
- */
- p.addr2 = (uint64_t) end_range;
- p.condition_value = 0;
-
-3. PTRACE_DELHWDEBUG
-
-Takes an integer which identifies an existing breakpoint or watchpoint
-(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
-corresponding breakpoint or watchpoint..
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.rst
index e7ac24aec4ff..42f5103140c9 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.rst
@@ -1,23 +1,23 @@
- Freescale QUICC Engine Firmware Uploading
- -----------------------------------------
+=========================================
+Freescale QUICC Engine Firmware Uploading
+=========================================
(c) 2007 Timur Tabi <timur at freescale.com>,
Freescale Semiconductor
-Table of Contents
-=================
+.. Table of Contents
- I - Software License for Firmware
+ I - Software License for Firmware
- II - Microcode Availability
+ II - Microcode Availability
- III - Description and Terminology
+ III - Description and Terminology
- IV - Microcode Programming Details
+ IV - Microcode Programming Details
- V - Firmware Structure Layout
+ V - Firmware Structure Layout
- VI - Sample Code for Creating Firmware Files
+ VI - Sample Code for Creating Firmware Files
Revision Information
====================
@@ -39,7 +39,7 @@ http://opensource.freescale.com. For other firmware files, please contact
your Freescale representative or your operating system vendor.
III - Description and Terminology
-================================
+=================================
In this document, the term 'microcode' refers to the sequence of 32-bit
integers that compose the actual QE microcode.
@@ -89,7 +89,7 @@ being fixed in the RAM package utilizing they should be activated. This data
structure signals the microcode which of these virtual traps is active.
This structure contains 6 words that the application should copy to some
-specific been defined. This table describes the structure.
+specific been defined. This table describes the structure::
---------------------------------------------------------------
| Offset in | | Destination Offset | Size of |
@@ -119,7 +119,7 @@ Extended Modes
This is a double word bit array (64 bits) that defines special functionality
which has an impact on the software drivers. Each bit has its own impact
and has special instructions for the s/w associated with it. This structure is
-described in this table:
+described in this table::
-----------------------------------------------------------------------
| Bit # | Name | Description |
@@ -220,7 +220,8 @@ The 'model' field is a 16-bit number that matches the actual SOC. The
'major' and 'minor' fields are the major and minor revision numbers,
respectively, of the SOC.
-For example, to match the 8323, revision 1.0:
+For example, to match the 8323, revision 1.0::
+
soc.model = 8323
soc.major = 1
soc.minor = 0
@@ -273,10 +274,10 @@ library and available to any driver that calles qe_get_firmware_info().
'reserved'.
After the last microcode is a 32-bit CRC. It can be calculated using
-this algorithm:
+this algorithm::
-u32 crc32(const u8 *p, unsigned int len)
-{
+ u32 crc32(const u8 *p, unsigned int len)
+ {
unsigned int i;
u32 crc = 0;
@@ -286,7 +287,7 @@ u32 crc32(const u8 *p, unsigned int len)
crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
}
return crc;
-}
+ }
VI - Sample Code for Creating Firmware Files
============================================
diff --git a/Documentation/powerpc/syscall64-abi.txt b/Documentation/powerpc/syscall64-abi.rst
index fa716a0d88bd..e49f69f941b9 100644
--- a/Documentation/powerpc/syscall64-abi.txt
+++ b/Documentation/powerpc/syscall64-abi.rst
@@ -5,12 +5,12 @@ Power Architecture 64-bit Linux system call ABI
syscall
=======
-syscall calling sequence[*] matches the Power Architecture 64-bit ELF ABI
+syscall calling sequence\ [1]_ matches the Power Architecture 64-bit ELF ABI
specification C function calling sequence, including register preservation
rules, with the following differences.
-[*] Some syscalls (typically low-level management functions) may have
- different calling sequences (e.g., rt_sigreturn).
+.. [1] Some syscalls (typically low-level management functions) may have
+ different calling sequences (e.g., rt_sigreturn).
Parameters and return value
---------------------------
@@ -33,12 +33,14 @@ Register preservation rules
Register preservation rules match the ELF ABI calling sequence with the
following differences:
-r0: Volatile. (System call number.)
-r3: Volatile. (Parameter 1, and return value.)
-r4-r8: Volatile. (Parameters 2-6.)
-cr0: Volatile (cr0.SO is the return error condition)
-cr1, cr5-7: Nonvolatile.
-lr: Nonvolatile.
+=========== ============= ========================================
+r0 Volatile (System call number.)
+r3 Volatile (Parameter 1, and return value.)
+r4-r8 Volatile (Parameters 2-6.)
+cr0 Volatile (cr0.SO is the return error condition)
+cr1, cr5-7 Nonvolatile
+lr Nonvolatile
+=========== ============= ========================================
All floating point and vector data registers as well as control and status
registers are nonvolatile.
@@ -90,9 +92,12 @@ The vsyscall may or may not use the caller's stack frame save areas.
Register preservation rules
---------------------------
-r0: Volatile.
-cr1, cr5-7: Volatile.
-lr: Volatile.
+
+=========== ========
+r0 Volatile
+cr1, cr5-7 Volatile
+lr Volatile
+=========== ========
Invocation
----------
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.rst
index 52c023e14f26..09955103acb4 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.rst
@@ -1,3 +1,4 @@
+============================
Transactional Memory support
============================
@@ -17,29 +18,29 @@ instructions are presented to delimit transactions; transactions are
guaranteed to either complete atomically or roll back and undo any partial
changes.
-A simple transaction looks like this:
+A simple transaction looks like this::
-begin_move_money:
- tbegin
- beq abort_handler
+ begin_move_money:
+ tbegin
+ beq abort_handler
- ld r4, SAVINGS_ACCT(r3)
- ld r5, CURRENT_ACCT(r3)
- subi r5, r5, 1
- addi r4, r4, 1
- std r4, SAVINGS_ACCT(r3)
- std r5, CURRENT_ACCT(r3)
+ ld r4, SAVINGS_ACCT(r3)
+ ld r5, CURRENT_ACCT(r3)
+ subi r5, r5, 1
+ addi r4, r4, 1
+ std r4, SAVINGS_ACCT(r3)
+ std r5, CURRENT_ACCT(r3)
- tend
+ tend
- b continue
+ b continue
-abort_handler:
- ... test for odd failures ...
+ abort_handler:
+ ... test for odd failures ...
- /* Retry the transaction if it failed because it conflicted with
- * someone else: */
- b begin_move_money
+ /* Retry the transaction if it failed because it conflicted with
+ * someone else: */
+ b begin_move_money
The 'tbegin' instruction denotes the start point, and 'tend' the end point.
@@ -123,7 +124,7 @@ Transaction-aware signal handlers can read the transactional register state
from the second ucontext. This will be necessary for crash handlers to
determine, for example, the address of the instruction causing the SIGSEGV.
-Example signal handler:
+Example signal handler::
void crash_handler(int sig, siginfo_t *si, void *uc)
{
@@ -133,9 +134,9 @@ Example signal handler:
if (ucp_link) {
u64 msr = ucp->uc_mcontext.regs->msr;
/* May have transactional ucontext! */
-#ifndef __powerpc64__
+ #ifndef __powerpc64__
msr |= ((u64)transactional_ucp->uc_mcontext.regs->msr) << 32;
-#endif
+ #endif
if (MSR_TM_ACTIVE(msr)) {
/* Yes, we crashed during a transaction. Oops. */
fprintf(stderr, "Transaction to be restarted at 0x%llx, but "
@@ -176,6 +177,7 @@ Failure cause codes used by kernel
These are defined in <asm/reg.h>, and distinguish different reasons why the
kernel aborted a transaction:
+ ====================== ================================
TM_CAUSE_RESCHED Thread was rescheduled.
TM_CAUSE_TLBI Software TLB invalid.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
@@ -184,6 +186,7 @@ kernel aborted a transaction:
TM_CAUSE_MISC Currently unused.
TM_CAUSE_ALIGNMENT Alignment fault.
TM_CAUSE_EMULATE Emulation that touched memory.
+ ====================== ================================
These can be checked by the user program's abort handler as TEXASR[0:7]. If
bit 7 is set, it indicates that the error is consider persistent. For example
@@ -203,7 +206,7 @@ POWER9
======
TM on POWER9 has issues with storing the complete register state. This
-is described in this commit:
+is described in this commit::
commit 4bb3c7a0208fc13ca70598efd109901a7cd45ae7
Author: Paul Mackerras <paulus@ozlabs.org>
diff --git a/Documentation/process/conf.py b/Documentation/process/conf.py
deleted file mode 100644
index 1b01a80ad9ce..000000000000
--- a/Documentation/process/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Development Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'process.tex', 'Linux Kernel Development Documentation',
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
index 49e0f64a3427..053b24a6dd38 100644
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@@ -119,3 +119,17 @@ array may exceed the remaining memory in the stack segment. This could
lead to a crash, possible overwriting sensitive contents at the end of the
stack (when built without `CONFIG_THREAD_INFO_IN_TASK=y`), or overwriting
memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)
+
+Implicit switch case fall-through
+---------------------------------
+The C language allows switch cases to "fall through" when
+a "break" statement is missing at the end of a case. This,
+however, introduces ambiguity in the code, as it's not always
+clear if the missing break is intentional or a bug. As there
+have been a long list of flaws `due to missing "break" statements
+<https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow
+"implicit fall-through". In order to identify an intentional fall-through
+case, we have adopted the marking used by static analyzers: a comment
+saying `/* Fall through */`. Once the C++17 `__attribute__((fallthrough))`
+is more widely handled by C compilers, static analyzers, and IDEs, we can
+switch to using that instead.
diff --git a/Documentation/s390/vfio-ccw.rst b/Documentation/s390/vfio-ccw.rst
index 1e210c6afa88..fca9c4f5bd9c 100644
--- a/Documentation/s390/vfio-ccw.rst
+++ b/Documentation/s390/vfio-ccw.rst
@@ -180,6 +180,13 @@ The process of how these work together.
add it to an iommu_group and a vfio_group. Then we could pass through
the mdev to a guest.
+
+VFIO-CCW Regions
+----------------
+
+The vfio-ccw driver exposes MMIO regions to accept requests from and return
+results to userspace.
+
vfio-ccw I/O region
-------------------
@@ -205,6 +212,25 @@ irb_area stores the I/O result.
ret_code stores a return code for each access of the region.
+This region is always available.
+
+vfio-ccw cmd region
+-------------------
+
+The vfio-ccw cmd region is used to accept asynchronous instructions
+from userspace::
+
+ #define VFIO_CCW_ASYNC_CMD_HSCH (1 << 0)
+ #define VFIO_CCW_ASYNC_CMD_CSCH (1 << 1)
+ struct ccw_cmd_region {
+ __u32 command;
+ __u32 ret_code;
+ } __packed;
+
+This region is exposed via region type VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD.
+
+Currently, CLEAR SUBCHANNEL and HALT SUBCHANNEL use this region.
+
vfio-ccw operation details
--------------------------
@@ -306,9 +332,8 @@ Together with the corresponding work in QEMU, we can bring the passed
through DASD/ECKD device online in a guest now and use it as a block
device.
-While the current code allows the guest to start channel programs via
-START SUBCHANNEL, support for HALT SUBCHANNEL or CLEAR SUBCHANNEL is
-not yet implemented.
+The current code allows the guest to start channel programs via
+START SUBCHANNEL, and to issue HALT SUBCHANNEL and CLEAR SUBCHANNEL.
vfio-ccw supports classic (command mode) channel I/O only. Transport
mode (HPF) is not supported.
diff --git a/Documentation/sh/conf.py b/Documentation/sh/conf.py
deleted file mode 100644
index 1eb684a13ac8..000000000000
--- a/Documentation/sh/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "SuperH architecture implementation manual"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'sh.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/sound/conf.py b/Documentation/sound/conf.py
deleted file mode 100644
index 3f1fc5e74e7b..000000000000
--- a/Documentation/sound/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Sound Subsystem Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'sound.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py
index 301a21aa4f63..eeb394b39e2c 100644
--- a/Documentation/sphinx/load_config.py
+++ b/Documentation/sphinx/load_config.py
@@ -21,6 +21,29 @@ def loadConfig(namespace):
and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
config_file = os.path.abspath(config_file)
+ # Let's avoid one conf.py file just due to latex_documents
+ start = config_file.find('Documentation/')
+ if start >= 0:
+ start = config_file.find('/', start + 1)
+
+ end = config_file.rfind('/')
+ if start >= 0 and end > 0:
+ dir = config_file[start + 1:end]
+
+ print("source directory: %s" % dir)
+ new_latex_docs = []
+ latex_documents = namespace['latex_documents']
+
+ for l in latex_documents:
+ if l[0].find(dir + '/') == 0:
+ has = True
+ fn = l[0][len(dir) + 1:]
+ new_latex_docs.append((fn, l[1], l[2], l[3], l[4]))
+ break
+
+ namespace['latex_documents'] = new_latex_docs
+
+ # If there is an extra conf.py file, load it
if os.path.isfile(config_file):
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
config = namespace.copy()
@@ -29,4 +52,6 @@ def loadConfig(namespace):
del config['__file__']
namespace.update(config)
else:
- sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)
+ config = namespace.copy()
+ config['tags'].add("subproject")
+ namespace.update(config)
diff --git a/Documentation/translations/it_IT/doc-guide/sphinx.rst b/Documentation/translations/it_IT/doc-guide/sphinx.rst
index 1739cba8863e..f1ad4504b734 100644
--- a/Documentation/translations/it_IT/doc-guide/sphinx.rst
+++ b/Documentation/translations/it_IT/doc-guide/sphinx.rst
@@ -242,8 +242,9 @@ del kernel:
* Per inserire blocchi di testo con caratteri a dimensione fissa (codici di
esempio, casi d'uso, eccetera): utilizzate ``::`` quando non è necessario
evidenziare la sintassi, specialmente per piccoli frammenti; invece,
- utilizzate ``.. code-block:: <language>`` per blocchi di più lunghi che
- potranno beneficiare dell'avere la sintassi evidenziata.
+ utilizzate ``.. code-block:: <language>`` per blocchi più lunghi che
+ beneficeranno della sintassi evidenziata. Per un breve pezzo di codice da
+ inserire nel testo, usate \`\`.
Il dominio C
@@ -267,12 +268,14 @@ molto comune come ``open`` o ``ioctl``:
Il nome della funzione (per esempio ioctl) rimane nel testo ma il nome del suo
riferimento cambia da ``ioctl`` a ``VIDIOC_LOG_STATUS``. Anche la voce
-nell'indice cambia in ``VIDIOC_LOG_STATUS`` e si potrà quindi fare riferimento
-a questa funzione scrivendo:
-
-.. code-block:: rst
-
- :c:func:`VIDIOC_LOG_STATUS`
+nell'indice cambia in ``VIDIOC_LOG_STATUS``.
+
+Notate che per una funzione non c'è bisogno di usare ``c:func:`` per generarne
+i riferimenti nella documentazione. Grazie a qualche magica estensione a
+Sphinx, il sistema di generazione della documentazione trasformerà
+automaticamente un riferimento ad una ``funzione()`` in un riferimento
+incrociato quando questa ha una voce nell'indice. Se trovate degli usi di
+``c:func:`` nella documentazione del kernel, sentitevi liberi di rimuoverli.
Tabelle a liste
diff --git a/Documentation/translations/it_IT/process/index.rst b/Documentation/translations/it_IT/process/index.rst
index 2eda85d5cd1e..012de0f3154a 100644
--- a/Documentation/translations/it_IT/process/index.rst
+++ b/Documentation/translations/it_IT/process/index.rst
@@ -27,6 +27,7 @@ Di seguito le guide che ogni sviluppatore dovrebbe leggere.
code-of-conduct
development-process
submitting-patches
+ programming-language
coding-style
maintainer-pgp-guide
email-clients
diff --git a/Documentation/translations/it_IT/process/kernel-docs.rst b/Documentation/translations/it_IT/process/kernel-docs.rst
index 7bd70d661737..38e0a955121a 100644
--- a/Documentation/translations/it_IT/process/kernel-docs.rst
+++ b/Documentation/translations/it_IT/process/kernel-docs.rst
@@ -1,6 +1,7 @@
.. include:: ../disclaimer-ita.rst
:Original: :ref:`Documentation/process/kernel-docs.rst <kernel_docs>`
+:Translator: Federico Vaga <federico.vaga@vaga.pv.it>
.. _it_kernel_docs:
@@ -8,6 +9,10 @@
Indice di documenti per le persone interessate a capire e/o scrivere per il kernel Linux
========================================================================================
-.. warning::
-
- TODO ancora da tradurre
+.. note::
+ Questo documento contiene riferimenti a documenti in lingua inglese; inoltre
+ utilizza dai campi *ReStructuredText* di supporto alla ricerca e che per
+ questo motivo è meglio non tradurre al fine di garantirne un corretto
+ utilizzo.
+ Per questi motivi il documento non verrà tradotto. Per favore fate
+ riferimento al documento originale in lingua inglese.
diff --git a/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
index 276db0e37f43..118fb4153e8f 100644
--- a/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
+++ b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst
@@ -248,7 +248,10 @@ possano ricevere la vostra nuova sottochiave::
kernel.
Se per qualche ragione preferite rimanere con sottochiavi RSA, nel comando
- precedente, sostituite "ed25519" con "rsa2048".
+ precedente, sostituite "ed25519" con "rsa2048". In aggiunta, se avete
+ intenzione di usare un dispositivo hardware che non supporta le chiavi
+ ED25519 ECC, come la Nitrokey Pro o la Yubikey, allora dovreste usare
+ "nistp256" al posto di "ed25519".
Copia di riserva della chiave primaria per gestire il recupero da disastro
--------------------------------------------------------------------------
@@ -449,23 +452,27 @@ implementi le funzionalità delle smartcard. Sul mercato ci sono diverse
soluzioni disponibili:
- `Nitrokey Start`_: è Open hardware e Free Software, è basata sul progetto
- `GnuK`_ della FSIJ. Ha il supporto per chiavi ECC, ma meno funzionalità di
- sicurezza (come la resistenza alla manomissione o alcuni attacchi ad un
- canale laterale).
+ `GnuK`_ della FSIJ. Questo è uno dei pochi dispositivi a supportare le chiavi
+ ECC ED25519, ma offre meno funzionalità di sicurezza (come la resistenza
+ alla manomissione o alcuni attacchi ad un canale laterale).
- `Nitrokey Pro`_: è simile alla Nitrokey Start, ma è più resistente alla
- manomissione e offre più funzionalità di sicurezza, ma l'ECC.
-- `Yubikey 4`_: l'hardware e il software sono proprietari, ma è più economica
+ manomissione e offre più funzionalità di sicurezza. La Pro 2 supporta la
+ crittografia ECC (NISTP).
+- `Yubikey 5`_: l'hardware e il software sono proprietari, ma è più economica
della Nitrokey Pro ed è venduta anche con porta USB-C il che è utile con i
computer portatili più recenti. In aggiunta, offre altre funzionalità di
- sicurezza come FIDO, U2F, ma non l'ECC
+ sicurezza come FIDO, U2F, e ora supporta anche le chiavi ECC (NISTP)
`Su LWN c'è una buona recensione`_ dei modelli elencati qui sopra e altri.
+La scelta dipenderà dal costo, dalla disponibilità nella vostra area
+geografica e vostre considerazioni sull'hardware aperto/proprietario.
+
Se volete usare chiavi ECC, la vostra migliore scelta sul mercato è la
Nitrokey Start.
.. _`Nitrokey Start`: https://shop.nitrokey.com/shop/product/nitrokey-start-6
-.. _`Nitrokey Pro`: https://shop.nitrokey.com/shop/product/nitrokey-pro-3
-.. _`Yubikey 4`: https://www.yubico.com/product/yubikey-4-series/
+.. _`Nitrokey Pro 2`: https://shop.nitrokey.com/shop/product/nitrokey-pro-2-3
+.. _`Yubikey 5`: https://www.yubico.com/product/yubikey-5-overview/
.. _Gnuk: http://www.fsij.org/doc-gnuk/
.. _`Su LWN c'è una buona recensione`: https://lwn.net/Articles/736231/
diff --git a/Documentation/translations/it_IT/process/programming-language.rst b/Documentation/translations/it_IT/process/programming-language.rst
new file mode 100644
index 000000000000..f4b006395849
--- /dev/null
+++ b/Documentation/translations/it_IT/process/programming-language.rst
@@ -0,0 +1,51 @@
+.. include:: ../disclaimer-ita.rst
+
+:Original: :ref:`Documentation/process/programming-language.rst <programming_language>`
+:Translator: Federico Vaga <federico.vaga@vaga.pv.it>
+
+.. _it_programming_language:
+
+Linguaggio di programmazione
+============================
+
+Il kernel è scritto nel linguaggio di programmazione C [c-language]_.
+Più precisamente, il kernel viene compilato con ``gcc`` [gcc]_ usando
+l'opzione ``-std=gnu89`` [gcc-c-dialect-options]_: il dialetto GNU
+dello standard ISO C90 (con l'aggiunta di alcune funzionalità da C99)
+
+Questo dialetto contiene diverse estensioni al linguaggio [gnu-extensions]_,
+e molte di queste vengono usate sistematicamente dal kernel.
+
+Il kernel offre un certo livello di supporto per la compilazione con ``clang``
+[clang]_ e ``icc`` [icc]_ su diverse architetture, tuttavia in questo momento
+il supporto non è completo e richiede delle patch aggiuntive.
+
+Attributi
+---------
+
+Una delle estensioni più comuni e usate nel kernel sono gli attributi
+[gcc-attribute-syntax]_. Gli attributi permettono di aggiungere una semantica,
+definita dell'implementazione, alle entità del linguaggio (come le variabili,
+le funzioni o i tipi) senza dover fare importanti modifiche sintattiche al
+linguaggio stesso (come l'aggiunta di nuove parole chiave) [n2049]_.
+
+In alcuni casi, gli attributi sono opzionali (ovvero un compilatore che non
+dovesse supportarli dovrebbe produrre comunque codice corretto, anche se
+più lento o che non esegue controlli aggiuntivi durante la compilazione).
+
+Il kernel definisce alcune pseudo parole chiave (per esempio ``__pure``)
+in alternativa alla sintassi GNU per gli attributi (per esempio
+``__attribute__((__pure__))``) allo scopo di mostrare quali funzionalità si
+possono usare e/o per accorciare il codice.
+
+Per maggiori informazioni consultate il file d'intestazione
+``include/linux/compiler_attributes.h``.
+
+.. [c-language] http://www.open-std.org/jtc1/sc22/wg14/www/standards
+.. [gcc] https://gcc.gnu.org
+.. [clang] https://clang.llvm.org
+.. [icc] https://software.intel.com/en-us/c-compilers
+.. [gcc-c-dialect-options] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html
+.. [gnu-extensions] https://gcc.gnu.org/onlinedocs/gcc/C-Extensions.html
+.. [gcc-attribute-syntax] https://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html
+.. [n2049] http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2049.pdf
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index a33c2a536542..2774624ee843 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -569,7 +569,7 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE
[*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다:
- Documentation/PCI/pci.rst
+ Documentation/driver-api/pci/pci.rst
Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/userspace-api/conf.py b/Documentation/userspace-api/conf.py
deleted file mode 100644
index 2eaf59f844e5..000000000000
--- a/Documentation/userspace-api/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux kernel user-space API guide"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'userspace-api.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/virtual/index.rst b/Documentation/virt/index.rst
index 062ffb527043..062ffb527043 100644
--- a/Documentation/virtual/index.rst
+++ b/Documentation/virt/index.rst
diff --git a/Documentation/virtual/kvm/amd-memory-encryption.rst b/Documentation/virt/kvm/amd-memory-encryption.rst
index d18c97b4e140..d18c97b4e140 100644
--- a/Documentation/virtual/kvm/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/amd-memory-encryption.rst
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virt/kvm/api.txt
index e54a3f51ddc5..2d067767b617 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virt/kvm/api.txt
@@ -3781,7 +3781,7 @@ encrypted VMs.
Currently, this ioctl is used for issuing Secure Encrypted Virtualization
(SEV) commands on AMD Processors. The SEV commands are defined in
-Documentation/virtual/kvm/amd-memory-encryption.rst.
+Documentation/virt/kvm/amd-memory-encryption.rst.
4.111 KVM_MEMORY_ENCRYPT_REG_REGION
diff --git a/Documentation/virtual/kvm/arm/hyp-abi.txt b/Documentation/virt/kvm/arm/hyp-abi.txt
index a20a0bee268d..a20a0bee268d 100644
--- a/Documentation/virtual/kvm/arm/hyp-abi.txt
+++ b/Documentation/virt/kvm/arm/hyp-abi.txt
diff --git a/Documentation/virtual/kvm/arm/psci.txt b/Documentation/virt/kvm/arm/psci.txt
index 559586fc9d37..559586fc9d37 100644
--- a/Documentation/virtual/kvm/arm/psci.txt
+++ b/Documentation/virt/kvm/arm/psci.txt
diff --git a/Documentation/virtual/kvm/cpuid.rst b/Documentation/virt/kvm/cpuid.rst
index 01b081f6e7ea..01b081f6e7ea 100644
--- a/Documentation/virtual/kvm/cpuid.rst
+++ b/Documentation/virt/kvm/cpuid.rst
diff --git a/Documentation/virtual/kvm/devices/README b/Documentation/virt/kvm/devices/README
index 34a69834124a..34a69834124a 100644
--- a/Documentation/virtual/kvm/devices/README
+++ b/Documentation/virt/kvm/devices/README
diff --git a/Documentation/virtual/kvm/devices/arm-vgic-its.txt b/Documentation/virt/kvm/devices/arm-vgic-its.txt
index eeaa95b893a8..eeaa95b893a8 100644
--- a/Documentation/virtual/kvm/devices/arm-vgic-its.txt
+++ b/Documentation/virt/kvm/devices/arm-vgic-its.txt
diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virt/kvm/devices/arm-vgic-v3.txt
index ff290b43c8e5..ff290b43c8e5 100644
--- a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt
+++ b/Documentation/virt/kvm/devices/arm-vgic-v3.txt
diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virt/kvm/devices/arm-vgic.txt
index 97b6518148f8..97b6518148f8 100644
--- a/Documentation/virtual/kvm/devices/arm-vgic.txt
+++ b/Documentation/virt/kvm/devices/arm-vgic.txt
diff --git a/Documentation/virtual/kvm/devices/mpic.txt b/Documentation/virt/kvm/devices/mpic.txt
index 8257397adc3c..8257397adc3c 100644
--- a/Documentation/virtual/kvm/devices/mpic.txt
+++ b/Documentation/virt/kvm/devices/mpic.txt
diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virt/kvm/devices/s390_flic.txt
index a4e20a090174..a4e20a090174 100644
--- a/Documentation/virtual/kvm/devices/s390_flic.txt
+++ b/Documentation/virt/kvm/devices/s390_flic.txt
diff --git a/Documentation/virtual/kvm/devices/vcpu.txt b/Documentation/virt/kvm/devices/vcpu.txt
index 2b5dab16c4f2..2b5dab16c4f2 100644
--- a/Documentation/virtual/kvm/devices/vcpu.txt
+++ b/Documentation/virt/kvm/devices/vcpu.txt
diff --git a/Documentation/virtual/kvm/devices/vfio.txt b/Documentation/virt/kvm/devices/vfio.txt
index 528c77c8022c..528c77c8022c 100644
--- a/Documentation/virtual/kvm/devices/vfio.txt
+++ b/Documentation/virt/kvm/devices/vfio.txt
diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virt/kvm/devices/vm.txt
index 4ffb82b02468..4ffb82b02468 100644
--- a/Documentation/virtual/kvm/devices/vm.txt
+++ b/Documentation/virt/kvm/devices/vm.txt
diff --git a/Documentation/virtual/kvm/devices/xics.txt b/Documentation/virt/kvm/devices/xics.txt
index 42864935ac5d..42864935ac5d 100644
--- a/Documentation/virtual/kvm/devices/xics.txt
+++ b/Documentation/virt/kvm/devices/xics.txt
diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virt/kvm/devices/xive.txt
index 9a24a4525253..9a24a4525253 100644
--- a/Documentation/virtual/kvm/devices/xive.txt
+++ b/Documentation/virt/kvm/devices/xive.txt
diff --git a/Documentation/virtual/kvm/halt-polling.txt b/Documentation/virt/kvm/halt-polling.txt
index 4f791b128dd2..4f791b128dd2 100644
--- a/Documentation/virtual/kvm/halt-polling.txt
+++ b/Documentation/virt/kvm/halt-polling.txt
diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virt/kvm/hypercalls.txt
index da210651f714..5f6d291bd004 100644
--- a/Documentation/virtual/kvm/hypercalls.txt
+++ b/Documentation/virt/kvm/hypercalls.txt
@@ -18,7 +18,7 @@ S390:
number in R1.
For further information on the S390 diagnose call as supported by KVM,
- refer to Documentation/virtual/kvm/s390-diag.txt.
+ refer to Documentation/virt/kvm/s390-diag.txt.
PowerPC:
It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
@@ -26,7 +26,7 @@ S390:
KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
property inside the device tree's /hypervisor node.
- For more information refer to Documentation/virtual/kvm/ppc-pv.txt
+ For more information refer to Documentation/virt/kvm/ppc-pv.txt
MIPS:
KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
diff --git a/Documentation/virtual/kvm/index.rst b/Documentation/virt/kvm/index.rst
index 0b206a06f5be..ada224a511fe 100644
--- a/Documentation/virtual/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -9,3 +9,4 @@ KVM
amd-memory-encryption
cpuid
+ vcpu-requests
diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virt/kvm/locking.txt
index 635cd6eaf714..635cd6eaf714 100644
--- a/Documentation/virtual/kvm/locking.txt
+++ b/Documentation/virt/kvm/locking.txt
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virt/kvm/mmu.txt
index 2efe0efc516e..1b9880dfba0a 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virt/kvm/mmu.txt
@@ -298,7 +298,7 @@ Handling a page fault is performed as follows:
vcpu->arch.mmio_gfn, and call the emulator
- If both P bit and R/W bit of error code are set, this could possibly
be handled as a "fast page fault" (fixed without taking the MMU lock). See
- the description in Documentation/virtual/kvm/locking.txt.
+ the description in Documentation/virt/kvm/locking.txt.
- if needed, walk the guest page tables to determine the guest translation
(gva->gpa or ngpa->gpa)
- if permissions are insufficient, reflect the fault back to the guest
diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virt/kvm/msr.txt
index df1f4338b3ca..df1f4338b3ca 100644
--- a/Documentation/virtual/kvm/msr.txt
+++ b/Documentation/virt/kvm/msr.txt
diff --git a/Documentation/virtual/kvm/nested-vmx.txt b/Documentation/virt/kvm/nested-vmx.txt
index 97eb1353e962..97eb1353e962 100644
--- a/Documentation/virtual/kvm/nested-vmx.txt
+++ b/Documentation/virt/kvm/nested-vmx.txt
diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virt/kvm/ppc-pv.txt
index e26115ce4258..e26115ce4258 100644
--- a/Documentation/virtual/kvm/ppc-pv.txt
+++ b/Documentation/virt/kvm/ppc-pv.txt
diff --git a/Documentation/virtual/kvm/review-checklist.txt b/Documentation/virt/kvm/review-checklist.txt
index a83b27635fdd..499af499e296 100644
--- a/Documentation/virtual/kvm/review-checklist.txt
+++ b/Documentation/virt/kvm/review-checklist.txt
@@ -7,7 +7,7 @@ Review checklist for kvm patches
2. Patches should be against kvm.git master branch.
3. If the patch introduces or modifies a new userspace API:
- - the API must be documented in Documentation/virtual/kvm/api.txt
+ - the API must be documented in Documentation/virt/kvm/api.txt
- the API must be discoverable using KVM_CHECK_EXTENSION
4. New state must include support for save/restore.
diff --git a/Documentation/virtual/kvm/s390-diag.txt b/Documentation/virt/kvm/s390-diag.txt
index 7c52e5f8b210..7c52e5f8b210 100644
--- a/Documentation/virtual/kvm/s390-diag.txt
+++ b/Documentation/virt/kvm/s390-diag.txt
diff --git a/Documentation/virtual/kvm/timekeeping.txt b/Documentation/virt/kvm/timekeeping.txt
index 76808a17ad84..76808a17ad84 100644
--- a/Documentation/virtual/kvm/timekeeping.txt
+++ b/Documentation/virt/kvm/timekeeping.txt
diff --git a/Documentation/virtual/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst
index 5feb3706a7ae..5feb3706a7ae 100644
--- a/Documentation/virtual/kvm/vcpu-requests.rst
+++ b/Documentation/virt/kvm/vcpu-requests.rst
diff --git a/Documentation/virtual/paravirt_ops.rst b/Documentation/virt/paravirt_ops.rst
index 6b789d27cead..6b789d27cead 100644
--- a/Documentation/virtual/paravirt_ops.rst
+++ b/Documentation/virt/paravirt_ops.rst
diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virt/uml/UserModeLinux-HOWTO.txt
index 87b80f589e1c..87b80f589e1c 100644
--- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/virt/uml/UserModeLinux-HOWTO.txt
diff --git a/Documentation/vm/conf.py b/Documentation/vm/conf.py
deleted file mode 100644
index 3b0b601af558..000000000000
--- a/Documentation/vm/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Memory Management Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'memory-management.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst
index 7d90964abbb0..710ce1c701bf 100644
--- a/Documentation/vm/hmm.rst
+++ b/Documentation/vm/hmm.rst
@@ -237,7 +237,7 @@ The usage pattern is::
ret = hmm_range_snapshot(&range);
if (ret) {
up_read(&mm->mmap_sem);
- if (ret == -EAGAIN) {
+ if (ret == -EBUSY) {
/*
* No need to check hmm_range_wait_until_valid() return value
* on retry we will get proper error with hmm_range_snapshot()
diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst
index c165d92cfd12..c824cd7f6e32 100644
--- a/Documentation/watchdog/hpwdt.rst
+++ b/Documentation/watchdog/hpwdt.rst
@@ -63,7 +63,7 @@ Last reviewed: 08/20/2018
and loop forever. This is generally not what a watchdog user wants.
For those wishing to learn more please see:
- Documentation/kdump/kdump.rst
+ Documentation/admin-guide/kdump/kdump.rst
Documentation/admin-guide/kernel-parameters.txt (panic=)
Your Linux Distribution specific documentation.
diff --git a/Documentation/x86/conf.py b/Documentation/x86/conf.py
deleted file mode 100644
index 33c5c3142e20..000000000000
--- a/Documentation/x86/conf.py
+++ /dev/null
@@ -1,10 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-project = "X86 architecture specific documentation"
-
-tags.add("subproject")
-
-latex_documents = [
- ('index', 'x86.tex', project,
- 'The kernel development community', 'manual'),
-]
diff --git a/MAINTAINERS b/MAINTAINERS
index ee663e0e2f2e..e352550a6895 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -899,7 +899,7 @@ L: linux-iio@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/adc/ad7124.c
-F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
ANALOG DEVICES INC AD7606 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
@@ -1194,7 +1194,7 @@ F: include/uapi/linux/if_arcnet.h
ARM ARCHITECTED TIMER DRIVER
M: Mark Rutland <mark.rutland@arm.com>
-M: Marc Zyngier <marc.zyngier@arm.com>
+M: Marc Zyngier <maz@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/include/asm/arch_timer.h
@@ -2155,10 +2155,12 @@ F: Documentation/devicetree/bindings/arm/realtek.txt
ARM/RENESAS ARM64 ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
+M: Geert Uytterhoeven <geert+renesas@glider.be>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
F: Documentation/devicetree/bindings/arm/renesas.yaml
@@ -2269,10 +2271,12 @@ F: drivers/media/platform/s5p-mfc/
ARM/SHMOBILE ARM ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
+M: Geert Uytterhoeven <geert+renesas@glider.be>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
S: Supported
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/gr-peach*
@@ -4195,7 +4199,7 @@ M: Jens Axboe <axboe@kernel.dk>
L: cgroups@vger.kernel.org
L: linux-block@vger.kernel.org
T: git git://git.kernel.dk/linux-block
-F: Documentation/cgroup-v1/blkio-controller.rst
+F: Documentation/admin-guide/cgroup-v1/blkio-controller.rst
F: block/blk-cgroup.c
F: include/linux/blk-cgroup.h
F: block/blk-throttle.c
@@ -4474,7 +4478,7 @@ F: arch/powerpc/platforms/powernv/pci-cxl.c
F: drivers/misc/cxl/
F: include/misc/cxl*
F: include/uapi/misc/cxl.h
-F: Documentation/powerpc/cxl.txt
+F: Documentation/powerpc/cxl.rst
F: Documentation/ABI/testing/sysfs-class-cxl
CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
@@ -4485,7 +4489,7 @@ L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/cxlflash/
F: include/uapi/scsi/cxlflash_ioctl.h
-F: Documentation/powerpc/cxlflash.txt
+F: Documentation/powerpc/cxlflash.rst
CYBERPRO FB DRIVER
M: Russell King <linux@armlinux.org.uk>
@@ -6327,7 +6331,8 @@ F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt
F: drivers/counter/ftm-quaddec.c
FLOPPY DRIVER
-S: Orphan
+M: Denis Efremov <efremov@linux.com>
+S: Odd Fixes
L: linux-block@vger.kernel.org
F: drivers/block/floppy.c
@@ -6827,13 +6832,6 @@ F: Documentation/filesystems/gfs2*.txt
F: fs/gfs2/
F: include/uapi/linux/gfs2_ondisk.h
-GIGASET ISDN DRIVERS
-M: Paul Bolle <pebolle@tiscali.nl>
-L: gigaset307x-common@lists.sourceforge.net
-W: http://gigaset307x.sourceforge.net/
-S: Odd Fixes
-F: drivers/staging/isdn/gigaset/
-
GNSS SUBSYSTEM
M: Johan Hovold <johan@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git
@@ -6861,7 +6859,7 @@ R: Sagi Shahar <sagis@google.com>
R: Jon Olson <jonolson@google.com>
L: netdev@vger.kernel.org
S: Supported
-F: Documentation/networking/device_drivers/google/gve.txt
+F: Documentation/networking/device_drivers/google/gve.rst
F: drivers/net/ethernet/google
GPD POCKET FAN DRIVER
@@ -8495,7 +8493,7 @@ S: Obsolete
F: include/uapi/linux/ipx.h
IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
-M: Marc Zyngier <marc.zyngier@arm.com>
+M: Marc Zyngier <maz@kernel.org>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: Documentation/IRQ-domain.txt
@@ -8513,7 +8511,7 @@ F: kernel/irq/
IRQCHIP DRIVERS
M: Thomas Gleixner <tglx@linutronix.de>
M: Jason Cooper <jason@lakedaemon.net>
-M: Marc Zyngier <marc.zyngier@arm.com>
+M: Marc Zyngier <maz@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
@@ -8813,7 +8811,7 @@ L: kvm@vger.kernel.org
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
S: Supported
-F: Documentation/virtual/kvm/
+F: Documentation/virt/kvm/
F: include/trace/events/kvm.h
F: include/uapi/asm-generic/kvm*
F: include/uapi/linux/kvm*
@@ -8833,10 +8831,10 @@ F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE FOR ARM/ARM64 (KVM/arm, KVM/arm64)
-M: Marc Zyngier <marc.zyngier@arm.com>
+M: Marc Zyngier <maz@kernel.org>
R: James Morse <james.morse@arm.com>
-R: Julien Thierry <julien.thierry@arm.com>
-R: Suzuki K Pouloze <suzuki.poulose@arm.com>
+R: Julien Thierry <julien.thierry.kdev@gmail.com>
+R: Suzuki K Poulose <suzuki.poulose@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git
@@ -11149,6 +11147,7 @@ L: netdev@vger.kernel.org
S: Maintained
W: https://fedorahosted.org/dropwatch/
F: net/core/drop_monitor.c
+F: include/uapi/linux/net_dropmon.h
NETWORKING DRIVERS
M: "David S. Miller" <davem@davemloft.net>
@@ -11287,6 +11286,7 @@ M: Aviad Yehezkel <aviadye@mellanox.com>
M: Dave Watson <davejwatson@fb.com>
M: John Fastabend <john.fastabend@gmail.com>
M: Daniel Borkmann <daniel@iogearbox.net>
+M: Jakub Kicinski <jakub.kicinski@netronome.com>
L: netdev@vger.kernel.org
S: Maintained
F: net/tls/*
@@ -12141,7 +12141,7 @@ M: Thomas Hellstrom <thellstrom@vmware.com>
M: "VMware, Inc." <pv-drivers@vmware.com>
L: virtualization@lists.linux-foundation.org
S: Supported
-F: Documentation/virtual/paravirt_ops.txt
+F: Documentation/virt/paravirt_ops.rst
F: arch/*/kernel/paravirt*
F: arch/*/include/asm/paravirt*.h
F: include/linux/hypervisor.h
@@ -12398,7 +12398,7 @@ F: Documentation/PCI/pci-error-recovery.rst
F: drivers/pci/pcie/aer.c
F: drivers/pci/pcie/dpc.c
F: drivers/pci/pcie/err.c
-F: Documentation/powerpc/eeh-pci-error-recovery.txt
+F: Documentation/powerpc/eeh-pci-error-recovery.rst
F: arch/powerpc/kernel/eeh*.c
F: arch/powerpc/platforms/*/eeh*.c
F: arch/powerpc/include/*/eeh*.h
@@ -13729,6 +13729,7 @@ F: drivers/mtd/nand/raw/r852.c
F: drivers/mtd/nand/raw/r852.h
RISC-V ARCHITECTURE
+M: Paul Walmsley <paul.walmsley@sifive.com>
M: Palmer Dabbelt <palmer@sifive.com>
M: Albert Ou <aou@eecs.berkeley.edu>
L: linux-riscv@lists.infradead.org
@@ -13951,7 +13952,6 @@ F: drivers/pci/hotplug/s390_pci_hpc.c
S390 VFIO-CCW DRIVER
M: Cornelia Huck <cohuck@redhat.com>
-M: Farhan Ali <alifm@linux.ibm.com>
M: Eric Farman <farman@linux.ibm.com>
R: Halil Pasic <pasic@linux.ibm.com>
L: linux-s390@vger.kernel.org
@@ -14020,6 +14020,12 @@ F: drivers/media/common/saa7146/
F: drivers/media/pci/saa7146/
F: include/media/drv-intf/saa7146*
+SAFESETID SECURITY MODULE
+M: Micah Morton <mortonm@chromium.org>
+S: Supported
+F: security/safesetid/
+F: Documentation/admin-guide/LSM/SafeSetID.rst
+
SAMSUNG AUDIO (ASoC) DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sangbeom Kim <sbkim73@samsung.com>
@@ -16858,7 +16864,7 @@ W: http://user-mode-linux.sourceforge.net
Q: https://patchwork.ozlabs.org/project/linux-um/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git
S: Maintained
-F: Documentation/virtual/uml/
+F: Documentation/virt/uml/
F: arch/um/
F: arch/x86/um/
F: fs/hostfs/
@@ -17127,7 +17133,7 @@ F: drivers/virtio/virtio_input.c
F: include/uapi/linux/virtio_input.h
VIRTIO IOMMU DRIVER
-M: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
+M: Jean-Philippe Brucker <jean-philippe@linaro.org>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/iommu/virtio-iommu.c
@@ -17176,7 +17182,6 @@ F: drivers/vme/
F: include/linux/vme*
VMWARE BALLOON DRIVER
-M: Julien Freche <jfreche@vmware.com>
M: Nadav Amit <namit@vmware.com>
M: "VMware, Inc." <pv-drivers@vmware.com>
L: linux-kernel@vger.kernel.org
@@ -17559,7 +17564,6 @@ M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jesper Dangaard Brouer <hawk@kernel.org>
M: John Fastabend <john.fastabend@gmail.com>
L: netdev@vger.kernel.org
-L: xdp-newbies@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: net/core/xdp.c
diff --git a/Makefile b/Makefile
index 9be5834073f8..23cdf1f41364 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Bobtail Squid
# *DOCUMENTATION*
@@ -472,6 +472,7 @@ KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
KBUILD_LDFLAGS :=
GCC_PLUGINS_CFLAGS :=
+CLANG_FLAGS :=
export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP PAHOLE KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
@@ -519,7 +520,7 @@ endif
ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
ifneq ($(CROSS_COMPILE),)
-CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%))
+CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%))
GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)
GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
@@ -843,6 +844,9 @@ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
# warn about C99 declaration after statement
KBUILD_CFLAGS += -Wdeclaration-after-statement
+# Warn about unmarked fall-throughs in switch statement.
+KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=3,)
+
# Variable Length Arrays (VLAs) should not be used anywhere in the kernel
KBUILD_CFLAGS += -Wvla
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c929bea9a9ff..85710e078afb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_QCOM_UARTDM
- default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
@@ -1575,7 +1574,6 @@ config DEBUG_UART_8250
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
- default 0x00100a00 if DEBUG_NETX_UART
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
default 0x01c28000 if DEBUG_SUNXI_UART0
default 0x01c28400 if DEBUG_SUNXI_UART1
@@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
@@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT
default 0xc881f000 if DEBUG_RV1108_UART2
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
- default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
@@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 18d0ae46e76c..0faae8950375 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -124,6 +124,9 @@
};
mdio-bus-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
/* BIT(9) = 1 => external mdio */
mdio_ext: mdio@200 {
reg = <0x200>;
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index cbe61b61a212..c2a9dd57e56a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -112,7 +112,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index 21ddd359d3ed..9f63706383a7 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -156,7 +156,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index b26d4f57c655..cc9adce638f5 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -148,7 +148,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 39eeeddac39e..09f7ffa9ad8c 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -43,7 +43,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts
index de07357b27fc..6cd7d5877d20 100644
--- a/arch/arm/boot/dts/imx6ul-pico-pi.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts
@@ -43,7 +43,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
@@ -58,7 +58,7 @@
};
&i2c3 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 992747a57442..56907bb4b329 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -186,7 +186,7 @@
reg = <0x40330200 0x200>;
};
- usbphy1: usb-phy@0x40350000 {
+ usbphy1: usb-phy@40350000 {
compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
reg = <0x40350000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index e6b98b6eb88d..822cddfbf1af 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -4,17 +4,9 @@ CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_U8500=y
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -25,6 +17,11 @@ CONFIG_CPU_IDLE=y
CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -47,7 +44,6 @@ CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
@@ -63,7 +59,6 @@ CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
@@ -72,6 +67,7 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
+CONFIG_SENSORS_IIO_HWMON=y
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
@@ -79,6 +75,13 @@ CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_LIMA=y
+CONFIG_DRM_MCDE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
@@ -87,6 +90,7 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y
CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
+CONFIG_MUSB_PIO_ONLY=y
CONFIG_AB8500_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
@@ -103,6 +107,7 @@ CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
+CONFIG_HWSPINLOCK=y
CONFIG_HSEM_U8500=y
CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
@@ -126,20 +131,19 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_DEV_UX500=y
+CONFIG_CRYPTO_DEV_UX500_CRYP=y
+CONFIG_CRYPTO_DEV_UX500_HASH=y
+CONFIG_CRYPTO_DEV_UX500_DEBUG=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y
CONFIG_CORESIGHT_SOURCE_ETM3X=y
-CONFIG_CRYPTO_DEV_UX500=y
-CONFIG_CRYPTO_DEV_UX500_CRYP=y
-CONFIG_CRYPTO_DEV_UX500_HASH=y
-CONFIG_CRYPTO_DEV_UX500_DEBUG=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7e0486ad1318..dba9355e2484 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -18,7 +18,9 @@ extern const struct dma_map_ops arm_coherent_dma_ops;
static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
{
- return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : NULL;
+ if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE))
+ return &arm_dma_ops;
+ return NULL;
}
#ifdef __arch_page_to_dma
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 05d03f09ff54..71262dcdbca3 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -24,6 +24,7 @@
#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
.text
+ .arch armv5te
/*
* Move DaVinci into deep sleep state
*
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
deleted file mode 100644
index 1e5d9c870784..000000000000
--- a/arch/arm/mach-netx/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "NetX Implementations"
- depends on ARCH_NETX
-
-config MACH_NXDKN
- bool "Enable Hilscher nxdkn Eval Board support"
- help
- Board support for the Hilscher NetX Eval Board
-
-config MACH_NXDB500
- bool "Enable Hilscher nxdb500 Eval Board support"
- select ARM_AMBA
- help
- Board support for the Hilscher nxdb500 Eval Board
-
-config MACH_NXEB500HMI
- bool "Enable Hilscher nxeb500hmi Eval Board support"
- select ARM_AMBA
- help
- Board support for the Hilscher nxeb500hmi Eval Board
-
-endmenu
diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile
deleted file mode 100644
index 44ea83f7d9c2..000000000000
--- a/arch/arm/mach-netx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += time.o generic.o pfifo.o xc.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NXDKN) += nxdkn.o
-obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o
-obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o
diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot
deleted file mode 100644
index 2eb23c0cb6b0..000000000000
--- a/arch/arm/mach-netx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x80008000
-
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
deleted file mode 100644
index 2dc80db07390..000000000000
--- a/arch/arm/mach-netx/fb.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/fb.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/err.h>
-#include <linux/gfp.h>
-
-#include <asm/irq.h>
-
-#include <mach/netx-regs.h>
-#include <mach/hardware.h>
-
-static struct clcd_panel *netx_panel;
-
-void netx_clcd_enable(struct clcd_fb *fb)
-{
-}
-
-int netx_clcd_setup(struct clcd_fb *fb)
-{
- dma_addr_t dma;
-
- fb->panel = netx_panel;
-
- fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
- GFP_KERNEL);
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = 1024*1024;
-
- return 0;
-}
-
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-void netx_clcd_remove(struct clcd_fb *fb)
-{
- dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
- fb->fb.fix.smem_start);
-}
-
-static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
-
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
-{
- netx_panel = panel;
- fb_device.dev.platform_data = board;
- return amba_device_register(&fb_device, &iomem_resource);
-}
diff --git a/arch/arm/mach-netx/fb.h b/arch/arm/mach-netx/fb.h
deleted file mode 100644
index 5cdc01fc3c86..000000000000
--- a/arch/arm/mach-netx/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/fb.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-void netx_clcd_enable(struct clcd_fb *fb);
-int netx_clcd_setup(struct clcd_fb *fb);
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
-void netx_clcd_remove(struct clcd_fb *fb);
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel);
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
deleted file mode 100644
index 88881fd45e9f..000000000000
--- a/arch/arm/mach-netx/generic.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/generic.c
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/netx-regs.h>
-#include <asm/mach/irq.h>
-
-static struct map_desc netx_io_desc[] __initdata = {
- {
- .virtual = NETX_IO_VIRT,
- .pfn = __phys_to_pfn(NETX_IO_PHYS),
- .length = NETX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init netx_map_io(void)
-{
- iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc));
-}
-
-static struct resource netx_rtc_resources[] = {
- [0] = {
- .start = 0x00101200,
- .end = 0x00101220,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device netx_rtc_device = {
- .name = "netx-rtc",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_rtc_resources),
- .resource = netx_rtc_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_rtc_device,
-};
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) while (0) {}
-#endif
-
-static void netx_hif_demux_handler(struct irq_desc *desc)
-{
- unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
- unsigned int stat;
-
- stat = ((readl(NETX_DPMAS_INT_EN) &
- readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
-
- while (stat) {
- if (stat & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- stat >>= 1;
- }
-}
-
-static int
-netx_hif_irq_type(struct irq_data *d, unsigned int type)
-{
- unsigned int val, irq;
-
- val = readl(NETX_DPMAS_IF_CONF1);
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- val |= (1 << 26) << irq;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- val &= ~((1 << 26) << irq);
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- val &= ~((1 << 26) << irq);
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- val |= (1 << 26) << irq;
- }
-
- writel(val, NETX_DPMAS_IF_CONF1);
-
- return 0;
-}
-
-static void
-netx_hif_ack_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- writel((1 << 24) << irq, NETX_DPMAS_INT_STAT);
-
- val = readl(NETX_DPMAS_INT_EN);
- val &= ~((1 << 24) << irq);
- writel(val, NETX_DPMAS_INT_EN);
-
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_mask_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- val = readl(NETX_DPMAS_INT_EN);
- val &= ~((1 << 24) << irq);
- writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_unmask_irq(struct irq_data *d)
-{
- unsigned int val, irq;
-
- irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
- val = readl(NETX_DPMAS_INT_EN);
- val |= (1 << 24) << irq;
- writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static struct irq_chip netx_hif_chip = {
- .irq_ack = netx_hif_ack_irq,
- .irq_mask = netx_hif_mask_irq,
- .irq_unmask = netx_hif_unmask_irq,
- .irq_set_type = netx_hif_irq_type,
-};
-
-void __init netx_init_irq(void)
-{
- int irq;
-
- vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0);
-
- for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
- irq_set_chip_and_handler(irq, &netx_hif_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST);
- }
-
- writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
- irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler);
-}
-
-static int __init netx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(netx_init);
-
-void netx_restart(enum reboot_mode mode, const char *cmd)
-{
- writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
- NETX_SYSTEM_RES_CR);
-}
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
deleted file mode 100644
index 223e304574a5..000000000000
--- a/arch/arm/mach-netx/generic.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/generic.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/reboot.h>
-
-extern void __init netx_map_io(void);
-extern void __init netx_init_irq(void);
-extern void netx_restart(enum reboot_mode, const char *);
-
-extern void netx_timer_init(void);
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
deleted file mode 100644
index 84253993d1e0..000000000000
--- a/arch/arm/mach-netx/include/mach/hardware.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS 0x00100000
-#define NETX_IO_VIRT 0xe0000000
-#define NETX_IO_SIZE 0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
deleted file mode 100644
index 540c92104fe8..000000000000
--- a/arch/arm/mach-netx/include/mach/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#define NETX_IRQ_VIC_START 64
-#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0)
-#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1)
-#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2)
-#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3)
-#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4)
-#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5)
-#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6)
-#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7)
-#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8)
-#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9)
-#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10)
-#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11)
-#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12)
-#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13)
-#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14)
-#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15)
-#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16)
-#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17)
-#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18)
-#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19)
-#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20)
-#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no))
-#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21)
-#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22)
-#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23)
-#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24)
-#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25)
-#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26)
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29)
-#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30)
-/* int 31 is reserved */
-
-#define NETX_IRQS (NETX_IRQ_VIC_START + 32)
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
deleted file mode 100644
index 7c356a6ab80b..000000000000
--- a/arch/arm/mach-netx/include/mach/netx-regs.h
+++ /dev/null
@@ -1,420 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM 0x00000
-#define NETX_OFS_MEMCR 0x00100
-#define NETX_OFS_DPMAS 0x03000
-#define NETX_OFS_GPIO 0x00800
-#define NETX_OFS_PIO 0x00900
-#define NETX_OFS_UART0 0x00a00
-#define NETX_OFS_UART1 0x00a40
-#define NETX_OFS_UART2 0x00a80
-#define NETX_OF_MIIMU 0x00b00
-#define NETX_OFS_SPI 0x00c00
-#define NETX_OFS_I2C 0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC 0x01200
-#define NETX_OFS_EXTBUS 0x03600
-#define NETX_OFS_LCD 0x04000
-#define NETX_OFS_USB 0x20000
-#define NETX_OFS_XMAC0 0x60000
-#define NETX_OFS_XMAC1 0x61000
-#define NETX_OFS_XMAC2 0x62000
-#define NETX_OFS_XMAC3 0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO 0x64000
-#define NETX_OFS_XPEC0 0x70000
-#define NETX_OFS_XPEC1 0x74000
-#define NETX_OFS_XPEC2 0x78000
-#define NETX_OFS_XPEC3 0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC 0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virtual addresses */
-#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs) IOMEM(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26)
-
-#define PHY_CONTROL_RESET (1<<31)
-#define PHY_CONTROL_SIM_BYP (1<<30)
-#define PHY_CONTROL_CLK_XLATIN (1<<29)
-#define PHY_CONTROL_PHY1_EN (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF 0
-#define PHY_MODE_10BASE_T_FULL 1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF 4
-#define PHY_MODE_REPEATER 5
-#define PHY_MODE_POWER_DOWN 6
-#define PHY_MODE_ALL 7
-
-/* Bits */
-#define VECT_CNTL_ENABLE (1 << 5)
-
-/*******************************
- * GPIO and timer module *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs) IOMEM(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2)
-#define NETX_GPIO_CFG_INV (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio) (1<<(gpio))
-#define COUNTER_BIT(counter) ((1<<16)<<(counter))
-
-/*******************************
- * PIO *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs) IOMEM(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU IOMEM(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY (1<<0)
-#define MIIMU_PREAMBLE (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD (1<<3)
-#define MIIMU_PHY_NRES (1<<4)
-#define MIIMU_RTA (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data) (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS 0x00
-#define NETX_XPEC_R1_OFS 0x04
-#define NETX_XPEC_R2_OFS 0x08
-#define NETX_XPEC_R3_OFS 0x0c
-#define NETX_XPEC_R4_OFS 0x10
-#define NETX_XPEC_R5_OFS 0x14
-#define NETX_XPEC_R6_OFS 0x18
-#define NETX_XPEC_R7_OFS 0x1c
-#define NETX_XPEC_RANGE01_OFS 0x20
-#define NETX_XPEC_RANGE23_OFS 0x24
-#define NETX_XPEC_RANGE45_OFS 0x28
-#define NETX_XPEC_RANGE67_OFS 0x2c
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS 0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS 0x90
-#define NETX_XPEC_FIFO_DATA_OFS 0x94
-#define NETX_XPEC_SYSTIME_S_OFS 0x98
-#define NETX_XPEC_ADC_OFS 0x9c
-#define NETX_XPEC_URX_COUNT_OFS 0x40
-#define NETX_XPEC_UTX_COUNT_OFS 0x44
-#define NETX_XPEC_PC_OFS 0x48
-#define NETX_XPEC_ZERO_OFS 0x4c
-#define NETX_XPEC_STATCFG_OFS 0x50
-#define NETX_XPEC_EC_MASKA_OFS 0x54
-#define NETX_XPEC_EC_MASKB_OFS 0x58
-#define NETX_XPEC_EC_MASK0_OFS 0x5c
-#define NETX_XPEC_EC_MASK8_OFS 0x7c
-#define NETX_XPEC_EC_MASK9_OFS 0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100
-#define NETX_XPEC_RAM_START_OFS 0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS 0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS 0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS 0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS 0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c
-
-#define RPU_HOLD_PC (1<<15)
-#define TPU_HOLD_PC (1<<15)
-
-/*******************************
- * Pointer FIFO *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs) IOMEM(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-
-/*******************************
- * Memory Controller *
- *******************************/
-
-/* Registers */
-#define NETX_MEMCR_REG(ofs) IOMEM(NETX_VA_MEMCR + (ofs))
-#define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
-#define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40)
-#define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44)
-#define NETX_MEMCR_SDRAM_MODE NETX_MEMCR_REG(0x48)
-#define NETX_MEMCR_SDRAM_EXT_MODE NETX_MEMCR_REG(0x4c)
-#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
-#define NETX_MEMCR_PRIO_ACCESS_CTRL NETX_MEMCR_REG(0x84)
-
-/* Bits */
-#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x) (((x) & 0x3) << 24)
-#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3) << 16)
-#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x) (((x) & 0x3) << 8)
-#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x) (((x) & 0x1f) << 0)
-
-
-/*******************************
- * Dual Port Memory *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs) IOMEM(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30)
-#define NETX_DPMAS_INT_EN_WDG (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72 (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47 (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40 (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36 (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35 (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17)
-#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE (1<<2)
-#define NETX_EXT_CONFIG_16BIT (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0 (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2 (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1 (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30)
-
-/*******************************
- * I2C *
- *******************************/
-#define NETX_I2C_REG(ofs) IOMEM(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
deleted file mode 100644
index de23180bc937..000000000000
--- a/arch/arm/mach-netx/include/mach/pfifo.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
- writel(pointer, NETX_PFIFO_BASE(no));
- return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
- return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
- return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
- return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
- return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
deleted file mode 100644
index edc1ac997eab..000000000000
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static inline void putc(char c)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_TXFF);
- REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base;
-
- if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
- base = UART1_BASE;
- else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
- base = UART2_BASE;
- else
- return;
-
- while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
deleted file mode 100644
index 465d5e250ab8..000000000000
--- a/arch/arm/mach-netx/include/mach/xc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-netx/include/mach/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
- int no;
- unsigned int type;
- unsigned int version;
- void __iomem *xpec_base;
- void __iomem *xmac_base;
- void __iomem *sram_base;
- int irq;
- struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
deleted file mode 100644
index ad5e6747b834..000000000000
--- a/arch/arm/mach-netx/nxdb500.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxdb500.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
- .mode = {
- .name = "QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 187617,
- .left_margin = 6,
- .right_margin = 26,
- .upper_margin = 0,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = 16,
- .cntl = CNTL_LCDTFT | CNTL_BGR,
- .bpp = 16,
- .grayscale = 0,
-};
-
-static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
- var->green.length = 5;
- var->green.msb_right = 0;
-
- return clcdfb_check(fb, var);
-}
-
-static int nxdb500_clcd_setup(struct clcd_fb *fb)
-{
- unsigned int val;
-
- fb->fb.var.green.length = 5;
- fb->fb.var.green.msb_right = 0;
-
- /* enable asic control */
- val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
- writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
- writel(3, NETX_SYSTEM_IOC_CR);
-
- val = readl(NETX_PIO_OUTPIO);
- writel(val | 1, NETX_PIO_OUTPIO);
-
- val = readl(NETX_PIO_OEPIO);
- writel(val | 1, NETX_PIO_OEPIO);
- return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
- .name = "netX",
- .check = nxdb500_check,
- .decode = clcdfb_decode,
- .enable = netx_clcd_enable,
- .setup = nxdb500_clcd_setup,
- .mmap = netx_clcd_mmap,
- .remove = netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct resource netx_uart1_resources[] = {
- [0] = {
- .start = 0x00100A40,
- .end = 0x00100A7F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART1),
- .end = (NETX_IRQ_UART1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart1_device = {
- .name = "netx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(netx_uart1_resources),
- .resource = netx_uart1_resources,
-};
-
-static struct resource netx_uart2_resources[] = {
- [0] = {
- .start = 0x00100A80,
- .end = 0x00100ABF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART2),
- .end = (NETX_IRQ_UART2),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart2_device = {
- .name = "netx-uart",
- .id = 2,
- .num_resources = ARRAY_SIZE(netx_uart2_resources),
- .resource = netx_uart2_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_eth0_device,
- &netx_eth1_device,
- &netx_uart0_device,
- &netx_uart1_device,
- &netx_uart2_device,
-};
-
-static void __init nxdb500_init(void)
-{
- netx_fb_init(&clcd_data, &qvga);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDB500, "Hilscher nxdb500")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxdb500_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
deleted file mode 100644
index 917381559628..000000000000
--- a/arch/arm/mach-netx/nxdkn.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxdkn.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device nxdkn_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device nxdkn_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &nxdkn_eth0_device,
- &nxdkn_eth1_device,
- &netx_uart0_device,
-};
-
-static void __init nxdkn_init(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDKN, "Hilscher nxdkn")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxdkn_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
deleted file mode 100644
index aa0d5b2ca712..000000000000
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/nxeb500hmi.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/netx-regs.h>
-#include <linux/platform_data/eth-netx.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
- .mode = {
- .name = "QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 187617,
- .left_margin = 6,
- .right_margin = 26,
- .upper_margin = 0,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = 16,
- .cntl = CNTL_LCDTFT | CNTL_BGR,
- .bpp = 16,
- .grayscale = 0,
-};
-
-static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
- var->green.length = 5;
- var->green.msb_right = 0;
-
- return clcdfb_check(fb, var);
-}
-
-static int nxeb500hmi_clcd_setup(struct clcd_fb *fb)
-{
- unsigned int val;
-
- fb->fb.var.green.length = 5;
- fb->fb.var.green.msb_right = 0;
-
- /* enable asic control */
- val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
- writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
- writel(3, NETX_SYSTEM_IOC_CR);
-
- /* GPIO 14 is used for display enable on newer boards */
- writel(9, NETX_GPIO_CFG(14));
-
- val = readl(NETX_PIO_OUTPIO);
- writel(val | 1, NETX_PIO_OUTPIO);
-
- val = readl(NETX_PIO_OEPIO);
- writel(val | 1, NETX_PIO_OEPIO);
- return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
- .name = "netX",
- .check = nxeb500hmi_check,
- .decode = clcdfb_decode,
- .enable = netx_clcd_enable,
- .setup = nxeb500hmi_clcd_setup,
- .mmap = netx_clcd_mmap,
- .remove = netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
- .xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
- .name = "netx-eth",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth0_platform_data,
- }
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
- .xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
- .name = "netx-eth",
- .id = 1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &eth1_platform_data,
- }
-};
-
-static struct resource netx_cf_resources[] = {
- [0] = {
- .start = 0x20000000,
- .end = 0x25ffffff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- },
-};
-
-static struct platform_device netx_cf_device = {
- .name = "netx-cf",
- .id = 0,
- .resource = netx_cf_resources,
- .num_resources = ARRAY_SIZE(netx_cf_resources),
-};
-
-static struct resource netx_uart0_resources[] = {
- [0] = {
- .start = 0x00100A00,
- .end = 0x00100A3F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (NETX_IRQ_UART0),
- .end = (NETX_IRQ_UART0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device netx_uart0_device = {
- .name = "netx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(netx_uart0_resources),
- .resource = netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &netx_eth0_device,
- &netx_eth1_device,
- &netx_cf_device,
- &netx_uart0_device,
-};
-
-static void __init nxeb500hmi_init(void)
-{
- netx_fb_init(&clcd_data, &qvga);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .atag_offset = 0x100,
- .map_io = netx_map_io,
- .init_irq = netx_init_irq,
- .init_time = netx_timer_init,
- .init_machine = nxeb500hmi_init,
- .restart = netx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
deleted file mode 100644
index 2e5cc777329f..000000000000
--- a/arch/arm/mach-netx/pfifo.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/pfifo.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/netx-regs.h>
-#include <mach/pfifo.h>
-
-static DEFINE_MUTEX(pfifo_lock);
-
-static unsigned int pfifo_used = 0;
-
-int pfifo_request(unsigned int pfifo_mask)
-{
- int err = 0;
- unsigned int val;
-
- mutex_lock(&pfifo_lock);
-
- if (pfifo_mask & pfifo_used) {
- err = -EBUSY;
- goto out;
- }
-
- pfifo_used |= pfifo_mask;
-
- val = readl(NETX_PFIFO_RESET);
- writel(val | pfifo_mask, NETX_PFIFO_RESET);
- writel(val, NETX_PFIFO_RESET);
-
-out:
- mutex_unlock(&pfifo_lock);
- return err;
-}
-
-void pfifo_free(unsigned int pfifo_mask)
-{
- mutex_lock(&pfifo_lock);
- pfifo_used &= ~pfifo_mask;
- mutex_unlock(&pfifo_lock);
-}
-
-EXPORT_SYMBOL(pfifo_push);
-EXPORT_SYMBOL(pfifo_pop);
-EXPORT_SYMBOL(pfifo_fill_level);
-EXPORT_SYMBOL(pfifo_empty);
-EXPORT_SYMBOL(pfifo_request);
-EXPORT_SYMBOL(pfifo_free);
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
deleted file mode 100644
index d9defa1ab605..000000000000
--- a/arch/arm/mach-netx/time.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/time.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/time.h>
-#include <mach/netx-regs.h>
-
-#define NETX_CLOCK_FREQ 100000000
-#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
-
-#define TIMER_CLOCKEVENT 0
-#define TIMER_CLOCKSOURCE 1
-
-static inline void timer_shutdown(struct clock_event_device *evt)
-{
- /* disable timer */
- writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-}
-
-static int netx_shutdown(struct clock_event_device *evt)
-{
- timer_shutdown(evt);
-
- return 0;
-}
-
-static int netx_set_oneshot(struct clock_event_device *evt)
-{
- u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
-
- timer_shutdown(evt);
- writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
- writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-
- return 0;
-}
-
-static int netx_set_periodic(struct clock_event_device *evt)
-{
- u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
- NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
-
- timer_shutdown(evt);
- writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
- writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-
- return 0;
-}
-
-static int netx_set_next_event(unsigned long evt,
- struct clock_event_device *clk)
-{
- writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
- return 0;
-}
-
-static struct clock_event_device netx_clockevent = {
- .name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = netx_set_next_event,
- .set_state_shutdown = netx_shutdown,
- .set_state_periodic = netx_set_periodic,
- .set_state_oneshot = netx_set_oneshot,
- .tick_resume = netx_shutdown,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-netx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &netx_clockevent;
-
- /* acknowledge interrupt */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction netx_timer_irq = {
- .name = "NetX Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = netx_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt
- */
-void __init netx_timer_init(void)
-{
- /* disable timer initially */
- writel(0, NETX_GPIO_COUNTER_CTRL(0));
-
- /* Reset the timer value to zero */
- writel(0, NETX_GPIO_COUNTER_CURRENT(0));
-
- writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
-
- /* acknowledge interrupt */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
- /* Enable the interrupt in the specific timer
- * register and start timer
- */
- writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
- writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
- NETX_GPIO_COUNTER_CTRL(0));
-
- setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
-
- /* Setup timer one for clocksource */
- writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
- writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
- writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
-
- writel(NETX_GPIO_COUNTER_CTRL_RUN,
- NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
-
- clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
- "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
-
- /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
- * Adding some safety ... */
- netx_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
- 0xa00, 0xfffffffe);
-}
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
deleted file mode 100644
index 885a618b2651..000000000000
--- a/arch/arm/mach-netx/xc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-netx/xc.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/netx-regs.h>
-
-#include <mach/xc.h>
-
-static DEFINE_MUTEX(xc_lock);
-
-static int xc_in_use = 0;
-
-struct fw_desc {
- unsigned int ofs;
- unsigned int size;
- unsigned int patch_ofs;
- unsigned int patch_entries;
-};
-
-struct fw_header {
- unsigned int magic;
- unsigned int type;
- unsigned int version;
- unsigned int reserved[5];
- struct fw_desc fw_desc[3];
-} __attribute__ ((packed));
-
-int xc_stop(struct xc *x)
-{
- writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
- writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
- writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
- return 0;
-}
-
-int xc_start(struct xc *x)
-{
- writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
- writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
- writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
- return 0;
-}
-
-int xc_running(struct xc *x)
-{
- return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC)
- || (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC)
- || (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ?
- 0 : 1;
-}
-
-int xc_reset(struct xc *x)
-{
- writel(0, x->xpec_base + NETX_XPEC_PC_OFS);
- return 0;
-}
-
-static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
-{
- if (adr >= NETX_PA_XMAC(x->no) &&
- adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE)
- return 0;
-
- if (adr >= NETX_PA_XPEC(x->no) &&
- adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE)
- return 0;
-
- dev_err(x->dev, "Illegal pointer in firmware found. aborting\n");
-
- return -1;
-}
-
-static int xc_patch(struct xc *x, const void *patch, int count)
-{
- unsigned int val, adr;
- const unsigned int *data = patch;
-
- int i;
- for (i = 0; i < count; i++) {
- adr = *data++;
- val = *data++;
- if (xc_check_ptr(x, adr, 4) < 0)
- return -EINVAL;
-
- writel(val, (void __iomem *)io_p2v(adr));
- }
- return 0;
-}
-
-int xc_request_firmware(struct xc *x)
-{
- int ret;
- char name[16];
- const struct firmware *fw;
- struct fw_header *head;
- unsigned int size;
- int i;
- const void *src;
- unsigned long dst;
-
- sprintf(name, "xc%d.bin", x->no);
-
- ret = request_firmware(&fw, name, x->dev);
-
- if (ret < 0) {
- dev_err(x->dev, "request_firmware failed\n");
- return ret;
- }
-
- head = (struct fw_header *)fw->data;
- if (head->magic != 0x4e657458) {
- if (head->magic == 0x5874654e) {
- dev_err(x->dev,
- "firmware magic is 'XteN'. Endianness problems?\n");
- ret = -ENODEV;
- goto exit_release_firmware;
- }
- dev_err(x->dev, "unrecognized firmware magic 0x%08x\n",
- head->magic);
- ret = -ENODEV;
- goto exit_release_firmware;
- }
-
- x->type = head->type;
- x->version = head->version;
-
- ret = -EINVAL;
-
- for (i = 0; i < 3; i++) {
- src = fw->data + head->fw_desc[i].ofs;
- dst = *(unsigned int *)src;
- src += sizeof (unsigned int);
- size = head->fw_desc[i].size - sizeof (unsigned int);
-
- if (xc_check_ptr(x, dst, size))
- goto exit_release_firmware;
-
- memcpy((void *)io_p2v(dst), src, size);
-
- src = fw->data + head->fw_desc[i].patch_ofs;
- size = head->fw_desc[i].patch_entries;
- ret = xc_patch(x, src, size);
- if (ret < 0)
- goto exit_release_firmware;
- }
-
- ret = 0;
-
- exit_release_firmware:
- release_firmware(fw);
-
- return ret;
-}
-
-struct xc *request_xc(int xcno, struct device *dev)
-{
- struct xc *x = NULL;
-
- mutex_lock(&xc_lock);
-
- if (xcno > 3)
- goto exit;
- if (xc_in_use & (1 << xcno))
- goto exit;
-
- x = kmalloc(sizeof (struct xc), GFP_KERNEL);
- if (!x)
- goto exit;
-
- if (!request_mem_region
- (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_free;
-
- if (!request_mem_region
- (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_release_1;
-
- if (!request_mem_region
- (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
- goto exit_release_2;
-
- x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
- x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno));
- x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- if (!x->sram_base)
- goto exit_release_3;
-
- x->irq = NETX_IRQ_XPEC(xcno);
-
- x->no = xcno;
- x->dev = dev;
-
- xc_in_use |= (1 << xcno);
-
- goto exit;
-
- exit_release_3:
- release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- exit_release_2:
- release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
- exit_release_1:
- release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
- exit_free:
- kfree(x);
- x = NULL;
- exit:
- mutex_unlock(&xc_lock);
- return x;
-}
-
-void free_xc(struct xc *x)
-{
- int xcno = x->no;
-
- mutex_lock(&xc_lock);
-
- iounmap(x->sram_base);
- release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
- release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
- release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
- xc_in_use &= ~(1 << x->no);
- kfree(x);
-
- mutex_unlock(&xc_lock);
-}
-
-EXPORT_SYMBOL(free_xc);
-EXPORT_SYMBOL(request_xc);
-EXPORT_SYMBOL(xc_request_firmware);
-EXPORT_SYMBOL(xc_reset);
-EXPORT_SYMBOL(xc_running);
-EXPORT_SYMBOL(xc_start);
-EXPORT_SYMBOL(xc_stop);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 820b60a50125..c54cd7ed90ba 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -663,6 +663,11 @@ config ARM_LPAE
depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
!CPU_32v4 && !CPU_32v3
select PHYS_ADDR_T_64BIT
+ select SWIOTLB
+ select ARCH_HAS_DMA_COHERENT_TO_PFN
+ select ARCH_HAS_DMA_MMAP_PGPROT
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 4789c60a86e3..6774b03aa405 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-noncoherent.h>
#include <linux/dma-contiguous.h>
#include <linux/highmem.h>
#include <linux/memblock.h>
@@ -1125,6 +1126,19 @@ int arm_dma_supported(struct device *dev, u64 mask)
static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
{
+ /*
+ * When CONFIG_ARM_LPAE is set, physical address can extend above
+ * 32-bits, which then can't be addressed by devices that only support
+ * 32-bit DMA.
+ * Use the generic dma-direct / swiotlb ops code in that case, as that
+ * handles bounce buffering for us.
+ *
+ * Note: this checks CONFIG_ARM_LPAE instead of CONFIG_SWIOTLB as the
+ * latter is also selected by the Xen code, but that code for now relies
+ * on non-NULL dev_dma_ops. To be cleaned up later.
+ */
+ if (IS_ENABLED(CONFIG_ARM_LPAE))
+ return NULL;
return coherent ? &arm_coherent_dma_ops : &arm_dma_ops;
}
@@ -2329,6 +2343,9 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
const struct dma_map_ops *dma_ops;
dev->archdata.dma_coherent = coherent;
+#ifdef CONFIG_SWIOTLB
+ dev->dma_coherent = coherent;
+#endif
/*
* Don't override the dma_ops if they have already been set. Ideally
@@ -2363,3 +2380,47 @@ void arch_teardown_dma_ops(struct device *dev)
/* Let arch_setup_dma_ops() start again from scratch upon re-probe */
set_dma_ops(dev, NULL);
}
+
+#ifdef CONFIG_SWIOTLB
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+ size_t size, enum dma_data_direction dir)
+{
+ __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
+ size, dir);
+}
+
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+ size_t size, enum dma_data_direction dir)
+{
+ __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
+ size, dir);
+}
+
+long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
+ dma_addr_t dma_addr)
+{
+ return dma_to_pfn(dev, dma_addr);
+}
+
+pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot,
+ unsigned long attrs)
+{
+ if (!dev_is_dma_coherent(dev))
+ return __get_dma_pgprot(attrs, prot);
+ return prot;
+}
+
+void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ gfp_t gfp, unsigned long attrs)
+{
+ return __dma_alloc(dev, size, dma_handle, gfp,
+ __get_dma_pgprot(attrs, PAGE_KERNEL), false,
+ attrs, __builtin_return_address(0));
+}
+
+void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle, unsigned long attrs)
+{
+ __arm_dma_free(dev, size, cpu_addr, dma_handle, attrs, false);
+}
+#endif /* CONFIG_SWIOTLB */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 4920a206dce9..16d373d587c4 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -21,6 +21,7 @@
#include <linux/dma-contiguous.h>
#include <linux/sizes.h>
#include <linux/stop_machine.h>
+#include <linux/swiotlb.h>
#include <asm/cp15.h>
#include <asm/mach-types.h>
@@ -463,6 +464,10 @@ static void __init free_highpages(void)
*/
void __init mem_init(void)
{
+#ifdef CONFIG_ARM_LPAE
+ swiotlb_init(1);
+#endif
+
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
/* this will put all unused low memory onto the freelists */
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index bb1f1dbb34e8..61de992bbea3 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -52,7 +52,7 @@ ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y)
ifeq ($(CONFIG_CC_IS_CLANG), y)
$(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built)
- else ifeq ($(CROSS_COMPILE_COMPAT),)
+ else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),)
$(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built)
else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),)
$(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index e25f7fcd7997..cffa8991880d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -462,7 +462,7 @@
#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2
#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0
@@ -472,7 +472,7 @@
#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2
#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d09b808eff87..52aae341d0da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -715,8 +715,7 @@
sai2: sai@308b0000 {
#sound-dai-cells = <0>;
- compatible = "fsl,imx8mq-sai",
- "fsl,imx6sx-sai";
+ compatible = "fsl,imx8mq-sai";
reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 79155a8cfe7c..89e4c8b79349 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -155,6 +155,12 @@ static inline void gic_pmr_mask_irqs(void)
BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF |
GIC_PRIO_PSR_I_SET));
BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
+ /*
+ * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared
+ * and non-secure PMR accesses are not subject to the shifts that
+ * are applied to IRQ priorities
+ */
+ BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON);
gic_write_pmr(GIC_PRIO_IRQOFF);
}
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 407e2bf23676..c96ffa4722d3 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -35,9 +35,10 @@
*/
enum ftr_type {
- FTR_EXACT, /* Use a predefined safe value */
- FTR_LOWER_SAFE, /* Smaller value is safe */
- FTR_HIGHER_SAFE,/* Bigger value is safe */
+ FTR_EXACT, /* Use a predefined safe value */
+ FTR_LOWER_SAFE, /* Smaller value is safe */
+ FTR_HIGHER_SAFE, /* Bigger value is safe */
+ FTR_HIGHER_OR_ZERO_SAFE, /* Bigger value is safe, but 0 is biggest */
};
#define FTR_STRICT true /* SANITY check strict matching required */
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index 987926ed535e..063c964af705 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -13,6 +13,8 @@
#define DAIF_PROCCTX 0
#define DAIF_PROCCTX_NOIRQ PSR_I_BIT
#define DAIF_ERRCTX (PSR_I_BIT | PSR_A_BIT)
+#define DAIF_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
+
/* mask/save/unmask/restore all exceptions, including interrupts. */
static inline void local_daif_mask(void)
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 8e79ce9c3f5c..76a144702586 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -105,7 +105,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
((protocol##_t *)instance)->f(instance, ##__VA_ARGS__)
#define alloc_screen_info(x...) &screen_info
-#define free_screen_info(x...)
+
+static inline void free_screen_info(efi_system_table_t *sys_table_arg,
+ struct screen_info *si)
+{
+}
/* redeclare as 'hidden' so the compiler will generate relative references */
extern struct screen_info screen_info __attribute__((__visibility__("hidden")));
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index 3c7037c6ba9b..b618017205a3 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -202,7 +202,7 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
({ \
set_thread_flag(TIF_32BIT); \
})
-#ifdef CONFIG_GENERIC_COMPAT_VDSO
+#ifdef CONFIG_COMPAT_VDSO
#define COMPAT_ARCH_DLINFO \
do { \
/* \
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index b7ba75809751..fb04f10a78ab 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -210,7 +210,11 @@ extern u64 vabits_user;
#define __tag_reset(addr) untagged_addr(addr)
#define __tag_get(addr) (__u8)((u64)(addr) >> 56)
#else
-#define __tag_set(addr, tag) (addr)
+static inline const void *__tag_set(const void *addr, u8 tag)
+{
+ return addr;
+}
+
#define __tag_reset(addr) (addr)
#define __tag_get(addr) 0
#endif
@@ -301,8 +305,8 @@ static inline void *phys_to_virt(phys_addr_t x)
#define page_to_virt(page) ({ \
unsigned long __addr = \
((__page_to_voff(page)) | PAGE_OFFSET); \
- unsigned long __addr_tag = \
- __tag_set(__addr, page_kasan_tag(page)); \
+ const void *__addr_tag = \
+ __tag_set((void *)__addr, page_kasan_tag(page)); \
((void *)__addr_tag); \
})
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 87a4b2ddc1a1..5fdcfe237338 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -301,7 +301,6 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b)
/*
* Huge pte definitions.
*/
-#define pte_huge(pte) (!(pte_val(pte) & PTE_TABLE_BIT))
#define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT))
/*
@@ -448,8 +447,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
PMD_TYPE_SECT)
#if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
-#define pud_sect(pud) (0)
-#define pud_table(pud) (1)
+static inline bool pud_sect(pud_t pud) { return false; }
+static inline bool pud_table(pud_t pud) { return true; }
#else
#define pud_sect(pud) ((pud_val(pud) & PUD_TYPE_MASK) == \
PUD_TYPE_SECT)
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index fd5b1a4efc70..844e2964b0f5 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -193,6 +193,16 @@ static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
regs->pmr_save = GIC_PRIO_IRQON;
}
+static inline void set_ssbs_bit(struct pt_regs *regs)
+{
+ regs->pstate |= PSR_SSBS_BIT;
+}
+
+static inline void set_compat_ssbs_bit(struct pt_regs *regs)
+{
+ regs->pstate |= PSR_AA32_SSBS_BIT;
+}
+
static inline void start_thread(struct pt_regs *regs, unsigned long pc,
unsigned long sp)
{
@@ -200,7 +210,7 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc,
regs->pstate = PSR_MODE_EL0t;
if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE)
- regs->pstate |= PSR_SSBS_BIT;
+ set_ssbs_bit(regs);
regs->sp = sp;
}
@@ -219,7 +229,7 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
#endif
if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE)
- regs->pstate |= PSR_AA32_SSBS_BIT;
+ set_compat_ssbs_bit(regs);
regs->compat_sp = sp;
}
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index b1dd039023ef..1dcf63a9ac1f 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -30,7 +30,7 @@
* in the the priority mask, it indicates that PSR.I should be set and
* interrupt disabling temporarily does not rely on IRQ priorities.
*/
-#define GIC_PRIO_IRQON 0xc0
+#define GIC_PRIO_IRQON 0xe0
#define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80)
#define GIC_PRIO_PSR_I_SET (1 << 4)
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
index df45af931459..4d9b1f48dc39 100644
--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -8,19 +8,12 @@
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
+#include <linux/types.h>
#include <asm/memory.h>
#include <asm/ptrace.h>
#include <asm/sdei.h>
-struct stackframe {
- unsigned long fp;
- unsigned long pc;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- int graph;
-#endif
-};
-
enum stack_type {
STACK_TYPE_UNKNOWN,
STACK_TYPE_TASK,
@@ -28,6 +21,7 @@ enum stack_type {
STACK_TYPE_OVERFLOW,
STACK_TYPE_SDEI_NORMAL,
STACK_TYPE_SDEI_CRITICAL,
+ __NR_STACK_TYPES
};
struct stack_info {
@@ -36,6 +30,37 @@ struct stack_info {
enum stack_type type;
};
+/*
+ * A snapshot of a frame record or fp/lr register values, along with some
+ * accounting information necessary for robust unwinding.
+ *
+ * @fp: The fp value in the frame record (or the real fp)
+ * @pc: The fp value in the frame record (or the real lr)
+ *
+ * @stacks_done: Stacks which have been entirely unwound, for which it is no
+ * longer valid to unwind to.
+ *
+ * @prev_fp: The fp that pointed to this frame record, or a synthetic value
+ * of 0. This is used to ensure that within a stack, each
+ * subsequent frame record is at an increasing address.
+ * @prev_type: The type of stack this frame record was on, or a synthetic
+ * value of STACK_TYPE_UNKNOWN. This is used to detect a
+ * transition from one stack to another.
+ *
+ * @graph: When FUNCTION_GRAPH_TRACER is selected, holds the index of a
+ * replacement lr value in the ftrace graph stack.
+ */
+struct stackframe {
+ unsigned long fp;
+ unsigned long pc;
+ DECLARE_BITMAP(stacks_done, __NR_STACK_TYPES);
+ unsigned long prev_fp;
+ enum stack_type prev_type;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ int graph;
+#endif
+};
+
extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame);
extern void walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
int (*fn)(struct stackframe *, void *), void *data);
@@ -64,8 +89,9 @@ static inline bool on_irq_stack(unsigned long sp,
return true;
}
-static inline bool on_task_stack(struct task_struct *tsk, unsigned long sp,
- struct stack_info *info)
+static inline bool on_task_stack(const struct task_struct *tsk,
+ unsigned long sp,
+ struct stack_info *info)
{
unsigned long low = (unsigned long)task_stack_page(tsk);
unsigned long high = low + THREAD_SIZE;
@@ -112,10 +138,13 @@ static inline bool on_overflow_stack(unsigned long sp,
* We can only safely access per-cpu stacks from current in a non-preemptible
* context.
*/
-static inline bool on_accessible_stack(struct task_struct *tsk,
- unsigned long sp,
- struct stack_info *info)
+static inline bool on_accessible_stack(const struct task_struct *tsk,
+ unsigned long sp,
+ struct stack_info *info)
{
+ if (info)
+ info->type = STACK_TYPE_UNKNOWN;
+
if (on_task_stack(tsk, sp, info))
return true;
if (tsk != current || preemptible())
@@ -130,4 +159,27 @@ static inline bool on_accessible_stack(struct task_struct *tsk,
return false;
}
+static inline void start_backtrace(struct stackframe *frame,
+ unsigned long fp, unsigned long pc)
+{
+ frame->fp = fp;
+ frame->pc = pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ frame->graph = 0;
+#endif
+
+ /*
+ * Prime the first unwind.
+ *
+ * In unwind_frame() we'll check that the FP points to a valid stack,
+ * which can't be STACK_TYPE_UNKNOWN, and the first unwind will be
+ * treated as a transition to whichever stack that happens to be. The
+ * prev_fp value won't be used, but we set it to 0 such that it is
+ * definitely not an accessible stack address.
+ */
+ bitmap_zero(frame->stacks_done, __NR_STACK_TYPES);
+ frame->prev_fp = 0;
+ frame->prev_type = STACK_TYPE_UNKNOWN;
+}
+
#endif /* __ASM_STACKTRACE_H */
diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
index f4812777f5c5..c50ee1b7d5cd 100644
--- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -16,6 +16,8 @@
#define VDSO_HAS_CLOCK_GETRES 1
+#define VDSO_HAS_32BIT_FALLBACK 1
+
static __always_inline
int gettimeofday_fallback(struct __kernel_old_timeval *_tv,
struct timezone *_tz)
@@ -52,6 +54,23 @@ long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
}
static __always_inline
+long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+ register struct old_timespec32 *ts asm("r1") = _ts;
+ register clockid_t clkid asm("r0") = _clkid;
+ register long ret asm ("r0");
+ register long nr asm("r7") = __NR_compat_clock_gettime;
+
+ asm volatile(
+ " swi #0\n"
+ : "=r" (ret)
+ : "r" (clkid), "r" (ts), "r" (nr)
+ : "memory");
+
+ return ret;
+}
+
+static __always_inline
int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
{
register struct __kernel_timespec *ts asm("r1") = _ts;
@@ -72,6 +91,27 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
return ret;
}
+static __always_inline
+int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+ register struct old_timespec32 *ts asm("r1") = _ts;
+ register clockid_t clkid asm("r0") = _clkid;
+ register long ret asm ("r0");
+ register long nr asm("r7") = __NR_compat_clock_getres;
+
+ /* The checks below are required for ABI consistency with arm */
+ if ((_clkid >= MAX_CLOCKS) && (_ts == NULL))
+ return -EINVAL;
+
+ asm volatile(
+ " swi #0\n"
+ : "=r" (ret)
+ : "r" (clkid), "r" (ts), "r" (nr)
+ : "memory");
+
+ return ret;
+}
+
static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
{
u64 res;
diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h
index b551b741653d..5e1e648aeec4 100644
--- a/arch/arm64/include/uapi/asm/bpf_perf_event.h
+++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
#define _UAPI__ASM_BPF_PERF_EVENT_H__
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index f29f36a65175..d19d14ba9ae4 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -225,8 +225,8 @@ static const struct arm64_ftr_bits ftr_ctr[] = {
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DIC_SHIFT, 1, 1),
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IDC_SHIFT, 1, 1),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_CWG_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_ERG_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_CWG_SHIFT, 4, 0),
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_ERG_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DMINLINE_SHIFT, 4, 1),
/*
* Linux can handle differing I-cache policies. Userspace JITs will
@@ -468,6 +468,10 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new,
case FTR_LOWER_SAFE:
ret = new < cur ? new : cur;
break;
+ case FTR_HIGHER_OR_ZERO_SAFE:
+ if (!cur || !new)
+ break;
+ /* Fallthrough */
case FTR_HIGHER_SAFE:
ret = new > cur ? new : cur;
break;
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index f8719bd30850..48222a4760c2 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -207,16 +207,16 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr)
list = user_mode(regs) ? &user_step_hook : &kernel_step_hook;
- rcu_read_lock();
-
+ /*
+ * Since single-step exception disables interrupt, this function is
+ * entirely not preemptible, and we can use rcu list safely here.
+ */
list_for_each_entry_rcu(hook, list, node) {
retval = hook->fn(regs, esr);
if (retval == DBG_HOOK_HANDLED)
break;
}
- rcu_read_unlock();
-
return retval;
}
NOKPROBE_SYMBOL(call_step_hook);
@@ -305,14 +305,16 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
list = user_mode(regs) ? &user_break_hook : &kernel_break_hook;
- rcu_read_lock();
+ /*
+ * Since brk exception disables interrupt, this function is
+ * entirely not preemptible, and we can use rcu list safely here.
+ */
list_for_each_entry_rcu(hook, list, node) {
unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
if ((comment & ~hook->mask) == hook->imm)
fn = hook->fn;
}
- rcu_read_unlock();
return fn ? fn(regs, esr) : DBG_HOOK_ERROR;
}
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 9cdc4592da3e..320a30dbe35e 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -586,10 +586,8 @@ el1_sync:
b.eq el1_ia
cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
b.eq el1_undef
- cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception
- b.eq el1_sp_pc
cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception
- b.eq el1_sp_pc
+ b.eq el1_pc
cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL1
b.eq el1_undef
cmp x24, #ESR_ELx_EC_BREAKPT_CUR // debug exception in EL1
@@ -611,9 +609,11 @@ el1_da:
bl do_mem_abort
kernel_exit 1
-el1_sp_pc:
+el1_pc:
/*
- * Stack or PC alignment exception handling
+ * PC alignment exception handling. We don't handle SP alignment faults,
+ * since we will have hit a recursive exception when trying to push the
+ * initial pt_regs.
*/
mrs x0, far_el1
inherit_daif pstate=x23, tmp=x2
@@ -732,9 +732,9 @@ el0_sync:
ccmp x24, #ESR_ELx_EC_WFx, #4, ne
b.eq el0_sys
cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception
- b.eq el0_sp_pc
+ b.eq el0_sp
cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception
- b.eq el0_sp_pc
+ b.eq el0_pc
cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0
b.eq el0_undef
cmp x24, #ESR_ELx_EC_BREAKPT_LOW // debug exception in EL0
@@ -758,7 +758,7 @@ el0_sync_compat:
cmp x24, #ESR_ELx_EC_FP_EXC32 // FP/ASIMD exception
b.eq el0_fpsimd_exc
cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception
- b.eq el0_sp_pc
+ b.eq el0_pc
cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0
b.eq el0_undef
cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap
@@ -858,11 +858,15 @@ el0_fpsimd_exc:
mov x1, sp
bl do_fpsimd_exc
b ret_to_user
+el0_sp:
+ ldr x26, [sp, #S_SP]
+ b el0_sp_pc
+el0_pc:
+ mrs x26, far_el1
el0_sp_pc:
/*
* Stack or PC alignment exception handling
*/
- mrs x26, far_el1
gic_prio_kentry_setup tmp=x0
enable_da_f
#ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index eec4776ae5f0..37d3912cfe06 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -406,6 +406,18 @@ static __uint128_t arm64_cpu_to_le128(__uint128_t x)
#define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x)
+static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst,
+ unsigned int vq)
+{
+ unsigned int i;
+ __uint128_t *p;
+
+ for (i = 0; i < SVE_NUM_ZREGS; ++i) {
+ p = (__uint128_t *)ZREG(sst, vq, i);
+ *p = arm64_cpu_to_le128(fst->vregs[i]);
+ }
+}
+
/*
* Transfer the FPSIMD state in task->thread.uw.fpsimd_state to
* task->thread.sve_state.
@@ -423,17 +435,12 @@ static void fpsimd_to_sve(struct task_struct *task)
unsigned int vq;
void *sst = task->thread.sve_state;
struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
- unsigned int i;
- __uint128_t *p;
if (!system_supports_sve())
return;
vq = sve_vq_from_vl(task->thread.sve_vl);
- for (i = 0; i < 32; ++i) {
- p = (__uint128_t *)ZREG(sst, vq, i);
- *p = arm64_cpu_to_le128(fst->vregs[i]);
- }
+ __fpsimd_to_sve(sst, fst, vq);
}
/*
@@ -459,7 +466,7 @@ static void sve_to_fpsimd(struct task_struct *task)
return;
vq = sve_vq_from_vl(task->thread.sve_vl);
- for (i = 0; i < 32; ++i) {
+ for (i = 0; i < SVE_NUM_ZREGS; ++i) {
p = (__uint128_t const *)ZREG(sst, vq, i);
fst->vregs[i] = arm64_le128_to_cpu(*p);
}
@@ -550,8 +557,6 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
unsigned int vq;
void *sst = task->thread.sve_state;
struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
- unsigned int i;
- __uint128_t *p;
if (!test_tsk_thread_flag(task, TIF_SVE))
return;
@@ -559,11 +564,7 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
vq = sve_vq_from_vl(task->thread.sve_vl);
memset(sst, 0, SVE_SIG_REGS_SIZE(vq));
-
- for (i = 0; i < 32; ++i) {
- p = (__uint128_t *)ZREG(sst, vq, i);
- *p = arm64_cpu_to_le128(fst->vregs[i]);
- }
+ __fpsimd_to_sve(sst, fst, vq);
}
int sve_set_vector_length(struct task_struct *task,
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index dceb84520948..38ee1514cd9c 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -536,13 +536,18 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
/* Aligned */
break;
case 1:
- /* Allow single byte watchpoint. */
- if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
- break;
case 2:
/* Allow halfword watchpoints and breakpoints. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
+
+ /* Fallthrough */
+ case 3:
+ /* Allow single byte watchpoint. */
+ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
+
+ /* Fallthrough */
default:
return -EINVAL;
}
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index 46e643e30708..03ff15bffbb6 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -314,18 +314,21 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* MOVW instruction relocations. */
case R_AARCH64_MOVW_UABS_G0_NC:
overflow_check = false;
+ /* Fall through */
case R_AARCH64_MOVW_UABS_G0:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
AARCH64_INSN_IMM_MOVKZ);
break;
case R_AARCH64_MOVW_UABS_G1_NC:
overflow_check = false;
+ /* Fall through */
case R_AARCH64_MOVW_UABS_G1:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
AARCH64_INSN_IMM_MOVKZ);
break;
case R_AARCH64_MOVW_UABS_G2_NC:
overflow_check = false;
+ /* Fall through */
case R_AARCH64_MOVW_UABS_G2:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
AARCH64_INSN_IMM_MOVKZ);
@@ -393,6 +396,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_AARCH64_ADR_PREL_PG_HI21_NC:
overflow_check = false;
+ /* Fall through */
case R_AARCH64_ADR_PREL_PG_HI21:
ovf = reloc_insn_adrp(me, sechdrs, loc, val);
if (ovf && ovf != -ERANGE)
diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c
index 9d63514b9836..b0e03e052dd1 100644
--- a/arch/arm64/kernel/perf_callchain.c
+++ b/arch/arm64/kernel/perf_callchain.c
@@ -154,12 +154,7 @@ void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
return;
}
- frame.fp = regs->regs[29];
- frame.pc = regs->pc;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
-
+ start_backtrace(&frame, regs->regs[29], regs->pc);
walk_stackframe(current, &frame, callchain_trace, entry);
}
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index bd5dfffca272..c4452827419b 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -21,6 +21,7 @@
#include <asm/ptrace.h>
#include <asm/cacheflush.h>
#include <asm/debug-monitors.h>
+#include <asm/daifflags.h>
#include <asm/system_misc.h>
#include <asm/insn.h>
#include <linux/uaccess.h>
@@ -168,33 +169,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p)
}
/*
- * When PSTATE.D is set (masked), then software step exceptions can not be
- * generated.
- * SPSR's D bit shows the value of PSTATE.D immediately before the
- * exception was taken. PSTATE.D is set while entering into any exception
- * mode, however software clears it for any normal (none-debug-exception)
- * mode in the exception entry. Therefore, when we are entering into kprobe
- * breakpoint handler from any normal mode then SPSR.D bit is already
- * cleared, however it is set when we are entering from any debug exception
- * mode.
- * Since we always need to generate single step exception after a kprobe
- * breakpoint exception therefore we need to clear it unconditionally, when
- * we become sure that the current breakpoint exception is for kprobe.
- */
-static void __kprobes
-spsr_set_debug_flag(struct pt_regs *regs, int mask)
-{
- unsigned long spsr = regs->pstate;
-
- if (mask)
- spsr |= PSR_D_BIT;
- else
- spsr &= ~PSR_D_BIT;
-
- regs->pstate = spsr;
-}
-
-/*
* Interrupts need to be disabled before single-step mode is set, and not
* reenabled until after single-step mode ends.
* Without disabling interrupt on local CPU, there is a chance of
@@ -205,17 +179,17 @@ spsr_set_debug_flag(struct pt_regs *regs, int mask)
static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
struct pt_regs *regs)
{
- kcb->saved_irqflag = regs->pstate;
+ kcb->saved_irqflag = regs->pstate & DAIF_MASK;
regs->pstate |= PSR_I_BIT;
+ /* Unmask PSTATE.D for enabling software step exceptions. */
+ regs->pstate &= ~PSR_D_BIT;
}
static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
struct pt_regs *regs)
{
- if (kcb->saved_irqflag & PSR_I_BIT)
- regs->pstate |= PSR_I_BIT;
- else
- regs->pstate &= ~PSR_I_BIT;
+ regs->pstate &= ~DAIF_MASK;
+ regs->pstate |= kcb->saved_irqflag;
}
static void __kprobes
@@ -252,8 +226,6 @@ static void __kprobes setup_singlestep(struct kprobe *p,
set_ss_context(kcb, slot); /* mark pending ss */
- spsr_set_debug_flag(regs, 0);
-
/* IRQs and single stepping do not mix well. */
kprobes_save_local_irqflag(kcb, regs);
kernel_enable_single_step(regs);
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6a869d9f304f..f674f28df663 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -398,7 +398,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
childregs->pstate |= PSR_UAO_BIT;
if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE)
- childregs->pstate |= PSR_SSBS_BIT;
+ set_ssbs_bit(childregs);
if (system_uses_irq_prio_masking())
childregs->pmr_save = GIC_PRIO_IRQON;
@@ -443,6 +443,32 @@ void uao_thread_switch(struct task_struct *next)
}
/*
+ * Force SSBS state on context-switch, since it may be lost after migrating
+ * from a CPU which treats the bit as RES0 in a heterogeneous system.
+ */
+static void ssbs_thread_switch(struct task_struct *next)
+{
+ struct pt_regs *regs = task_pt_regs(next);
+
+ /*
+ * Nothing to do for kernel threads, but 'regs' may be junk
+ * (e.g. idle task) so check the flags and bail early.
+ */
+ if (unlikely(next->flags & PF_KTHREAD))
+ return;
+
+ /* If the mitigation is enabled, then we leave SSBS clear. */
+ if ((arm64_get_ssbd_state() == ARM64_SSBD_FORCE_ENABLE) ||
+ test_tsk_thread_flag(next, TIF_SSBD))
+ return;
+
+ if (compat_user_mode(regs))
+ set_compat_ssbs_bit(regs);
+ else if (user_mode(regs))
+ set_ssbs_bit(regs);
+}
+
+/*
* We store our current task in sp_el0, which is clobbered by userspace. Keep a
* shadow copy so that we can restore this upon entry from userspace.
*
@@ -471,6 +497,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
entry_task_switch(next);
uao_thread_switch(next);
ptrauth_thread_switch(next);
+ ssbs_thread_switch(next);
/*
* Complete any pending TLB or cache maintenance on this CPU in case
@@ -498,11 +525,8 @@ unsigned long get_wchan(struct task_struct *p)
if (!stack_page)
return 0;
- frame.fp = thread_saved_fp(p);
- frame.pc = thread_saved_pc(p);
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
+ start_backtrace(&frame, thread_saved_fp(p), thread_saved_pc(p));
+
do {
if (unwind_frame(p, &frame))
goto out;
diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c
index b21cba90f82d..a5e8b3b9d798 100644
--- a/arch/arm64/kernel/return_address.c
+++ b/arch/arm64/kernel/return_address.c
@@ -8,6 +8,7 @@
#include <linux/export.h>
#include <linux/ftrace.h>
+#include <linux/kprobes.h>
#include <asm/stack_pointer.h>
#include <asm/stacktrace.h>
@@ -29,6 +30,7 @@ static int save_return_addr(struct stackframe *frame, void *d)
return 0;
}
}
+NOKPROBE_SYMBOL(save_return_addr);
void *return_address(unsigned int level)
{
@@ -38,12 +40,9 @@ void *return_address(unsigned int level)
data.level = level + 2;
data.addr = NULL;
- frame.fp = (unsigned long)__builtin_frame_address(0);
- frame.pc = (unsigned long)return_address; /* dummy */
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
-
+ start_backtrace(&frame,
+ (unsigned long)__builtin_frame_address(0),
+ (unsigned long)return_address);
walk_stackframe(current, &frame, save_return_addr, &data);
if (!data.level)
@@ -52,3 +51,4 @@ void *return_address(unsigned int level)
return NULL;
}
EXPORT_SYMBOL_GPL(return_address);
+NOKPROBE_SYMBOL(return_address);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index ea90d3bd9253..018a33e01b0e 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -152,8 +152,8 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
pr_crit("CPU%u: died during early boot\n", cpu);
break;
}
- /* Fall through */
pr_crit("CPU%u: may not have shut down cleanly\n", cpu);
+ /* Fall through */
case CPU_STUCK_IN_KERNEL:
pr_crit("CPU%u: is stuck in kernel\n", cpu);
if (status & CPU_STUCK_REASON_52_BIT_VA)
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 62d395151abe..a336cb124320 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/ftrace.h>
+#include <linux/kprobes.h>
#include <linux/sched.h>
#include <linux/sched/debug.h>
#include <linux/sched/task_stack.h>
@@ -29,9 +30,18 @@
* ldp x29, x30, [sp]
* add sp, sp, #0x10
*/
+
+/*
+ * Unwind from one frame record (A) to the next frame record (B).
+ *
+ * We terminate early if the location of B indicates a malformed chain of frame
+ * records (e.g. a cycle), determined based on the location and fp value of A
+ * and the location (but not the fp value) of B.
+ */
int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
{
unsigned long fp = frame->fp;
+ struct stack_info info;
if (fp & 0xf)
return -EINVAL;
@@ -39,11 +49,40 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
if (!tsk)
tsk = current;
- if (!on_accessible_stack(tsk, fp, NULL))
+ if (!on_accessible_stack(tsk, fp, &info))
+ return -EINVAL;
+
+ if (test_bit(info.type, frame->stacks_done))
return -EINVAL;
+ /*
+ * As stacks grow downward, any valid record on the same stack must be
+ * at a strictly higher address than the prior record.
+ *
+ * Stacks can nest in several valid orders, e.g.
+ *
+ * TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL
+ * TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW
+ *
+ * ... but the nesting itself is strict. Once we transition from one
+ * stack to another, it's never valid to unwind back to that first
+ * stack.
+ */
+ if (info.type == frame->prev_type) {
+ if (fp <= frame->prev_fp)
+ return -EINVAL;
+ } else {
+ set_bit(frame->prev_type, frame->stacks_done);
+ }
+
+ /*
+ * Record this frame record's values and location. The prev_fp and
+ * prev_type are only meaningful to the next unwind_frame() invocation.
+ */
frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
+ frame->prev_fp = fp;
+ frame->prev_type = info.type;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
if (tsk->ret_stack &&
@@ -73,6 +112,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
return 0;
}
+NOKPROBE_SYMBOL(unwind_frame);
void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
int (*fn)(struct stackframe *, void *), void *data)
@@ -87,6 +127,7 @@ void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
break;
}
}
+NOKPROBE_SYMBOL(walk_stackframe);
#ifdef CONFIG_STACKTRACE
struct stack_trace_data {
@@ -122,12 +163,7 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
data.skip = trace->skip;
data.no_sched_functions = 0;
- frame.fp = regs->regs[29];
- frame.pc = regs->pc;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
-
+ start_backtrace(&frame, regs->regs[29], regs->pc);
walk_stackframe(current, &frame, save_trace, &data);
}
EXPORT_SYMBOL_GPL(save_stack_trace_regs);
@@ -146,17 +182,15 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
data.no_sched_functions = nosched;
if (tsk != current) {
- frame.fp = thread_saved_fp(tsk);
- frame.pc = thread_saved_pc(tsk);
+ start_backtrace(&frame, thread_saved_fp(tsk),
+ thread_saved_pc(tsk));
} else {
/* We don't want this function nor the caller */
data.skip += 2;
- frame.fp = (unsigned long)__builtin_frame_address(0);
- frame.pc = (unsigned long)__save_stack_trace;
+ start_backtrace(&frame,
+ (unsigned long)__builtin_frame_address(0),
+ (unsigned long)__save_stack_trace);
}
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
walk_stackframe(tsk, &frame, save_trace, &data);
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index 9f25aedeac9d..0b2946414dc9 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -38,11 +38,8 @@ unsigned long profile_pc(struct pt_regs *regs)
if (!in_lock_functions(regs->pc))
return regs->pc;
- frame.fp = regs->regs[29];
- frame.pc = regs->pc;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
+ start_backtrace(&frame, regs->regs[29], regs->pc);
+
do {
int ret = unwind_frame(NULL, &frame);
if (ret < 0)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 8c03456dade6..d3313797cca9 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -100,18 +100,17 @@ void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
return;
if (tsk == current) {
- frame.fp = (unsigned long)__builtin_frame_address(0);
- frame.pc = (unsigned long)dump_backtrace;
+ start_backtrace(&frame,
+ (unsigned long)__builtin_frame_address(0),
+ (unsigned long)dump_backtrace);
} else {
/*
* task blocked in __switch_to
*/
- frame.fp = thread_saved_fp(tsk);
- frame.pc = thread_saved_pc(tsk);
+ start_backtrace(&frame,
+ thread_saved_fp(tsk),
+ thread_saved_pc(tsk));
}
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- frame.graph = 0;
-#endif
printk("Call trace:\n");
do {
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 4ab863045188..dd2514bb1511 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -32,10 +32,10 @@ UBSAN_SANITIZE := n
OBJECT_FILES_NON_STANDARD := y
KCOV_INSTRUMENT := n
-ifeq ($(c-gettimeofday-y),)
CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny
-else
-CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -include $(c-gettimeofday-y)
+
+ifneq ($(c-gettimeofday-y),)
+ CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
endif
# Clang versions less than 8 do not support -mcmodel=tiny
@@ -57,8 +57,7 @@ $(obj)/vdso.o : $(obj)/vdso.so
# Link rule for the .so file, .lds has to be first
$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
- $(call if_changed,ld)
- $(call if_changed,vdso_check)
+ $(call if_changed,vdsold_and_vdso_check)
# Strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
@@ -74,8 +73,8 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
$(call if_changed,vdsosym)
# Actual build commands
-quiet_cmd_vdsocc = VDSOCC $@
- cmd_vdsocc = $(CC) $(a_flags) $(c_flags) -c -o $@ $<
+quiet_cmd_vdsold_and_vdso_check = LD $@
+ cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check)
# Install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 60a4c6239712..1fba0776ed40 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -144,8 +144,7 @@ $(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
# Link rule for the .so file, .lds has to be first
$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE
- $(call if_changed,vdsold)
- $(call if_changed,vdso_check)
+ $(call if_changed,vdsold_and_vdso_check)
# Compilation rules for the vDSO sources
$(c-obj-vdso): %.o: %.c FORCE
@@ -156,14 +155,17 @@ $(asm-obj-vdso): %.o: %.S FORCE
$(call if_changed_dep,vdsoas)
# Actual build commands
-quiet_cmd_vdsold = VDSOL $@
+quiet_cmd_vdsold_and_vdso_check = LD32 $@
+ cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check)
+
+quiet_cmd_vdsold = LD32 $@
cmd_vdsold = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \
-Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
-quiet_cmd_vdsocc = VDSOC $@
+quiet_cmd_vdsocc = CC32 $@
cmd_vdsocc = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
-quiet_cmd_vdsocc_gettimeofday = VDSOC_GTD $@
+quiet_cmd_vdsocc_gettimeofday = CC32 $@
cmd_vdsocc_gettimeofday = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
-quiet_cmd_vdsoas = VDSOA $@
+quiet_cmd_vdsoas = AS32 $@
cmd_vdsoas = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
quiet_cmd_vdsomunge = MUNGE $@
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 9568c116ac7f..cfd65b63f36f 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -777,6 +777,53 @@ void __init hook_debug_fault_code(int nr,
debug_fault_info[nr].name = name;
}
+/*
+ * In debug exception context, we explicitly disable preemption despite
+ * having interrupts disabled.
+ * This serves two purposes: it makes it much less likely that we would
+ * accidentally schedule in exception context and it will force a warning
+ * if we somehow manage to schedule by accident.
+ */
+static void debug_exception_enter(struct pt_regs *regs)
+{
+ /*
+ * Tell lockdep we disabled irqs in entry.S. Do nothing if they were
+ * already disabled to preserve the last enabled/disabled addresses.
+ */
+ if (interrupts_enabled(regs))
+ trace_hardirqs_off();
+
+ if (user_mode(regs)) {
+ RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
+ } else {
+ /*
+ * We might have interrupted pretty much anything. In
+ * fact, if we're a debug exception, we can even interrupt
+ * NMI processing. We don't want this code makes in_nmi()
+ * to return true, but we need to notify RCU.
+ */
+ rcu_nmi_enter();
+ }
+
+ preempt_disable();
+
+ /* This code is a bit fragile. Test it. */
+ RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work");
+}
+NOKPROBE_SYMBOL(debug_exception_enter);
+
+static void debug_exception_exit(struct pt_regs *regs)
+{
+ preempt_enable_no_resched();
+
+ if (!user_mode(regs))
+ rcu_nmi_exit();
+
+ if (interrupts_enabled(regs))
+ trace_hardirqs_on();
+}
+NOKPROBE_SYMBOL(debug_exception_exit);
+
#ifdef CONFIG_ARM64_ERRATUM_1463225
DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
@@ -817,12 +864,7 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint,
if (cortex_a76_erratum_1463225_debug_handler(regs))
return;
- /*
- * Tell lockdep we disabled irqs in entry.S. Do nothing if they were
- * already disabled to preserve the last enabled/disabled addresses.
- */
- if (interrupts_enabled(regs))
- trace_hardirqs_off();
+ debug_exception_enter(regs);
if (user_mode(regs) && !is_ttbr0_addr(pc))
arm64_apply_bp_hardening();
@@ -832,7 +874,6 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint,
inf->sig, inf->code, (void __user *)pc, esr);
}
- if (interrupts_enabled(regs))
- trace_hardirqs_on();
+ debug_exception_exit(regs);
}
NOKPROBE_SYMBOL(do_debug_exception);
diff --git a/arch/csky/include/uapi/asm/byteorder.h b/arch/csky/include/uapi/asm/byteorder.h
index b079ec715cdf..d150cd664873 100644
--- a/arch/csky/include/uapi/asm/byteorder.h
+++ b/arch/csky/include/uapi/asm/byteorder.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#ifndef __ASM_CSKY_BYTEORDER_H
diff --git a/arch/csky/include/uapi/asm/cachectl.h b/arch/csky/include/uapi/asm/cachectl.h
index ddf2f39aa925..ed7fad1ea20d 100644
--- a/arch/csky/include/uapi/asm/cachectl.h
+++ b/arch/csky/include/uapi/asm/cachectl.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __ASM_CSKY_CACHECTL_H
#define __ASM_CSKY_CACHECTL_H
diff --git a/arch/csky/include/uapi/asm/perf_regs.h b/arch/csky/include/uapi/asm/perf_regs.h
index ee323d818592..49d4e147a559 100644
--- a/arch/csky/include/uapi/asm/perf_regs.h
+++ b/arch/csky/include/uapi/asm/perf_regs.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd.
#ifndef _ASM_CSKY_PERF_REGS_H
diff --git a/arch/csky/include/uapi/asm/ptrace.h b/arch/csky/include/uapi/asm/ptrace.h
index 4e248d5b86ef..66b2268e324e 100644
--- a/arch/csky/include/uapi/asm/ptrace.h
+++ b/arch/csky/include/uapi/asm/ptrace.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#ifndef _CSKY_PTRACE_H
diff --git a/arch/csky/include/uapi/asm/sigcontext.h b/arch/csky/include/uapi/asm/sigcontext.h
index e81e7ff11e36..670c020f2cb8 100644
--- a/arch/csky/include/uapi/asm/sigcontext.h
+++ b/arch/csky/include/uapi/asm/sigcontext.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#ifndef __ASM_CSKY_SIGCONTEXT_H
diff --git a/arch/csky/include/uapi/asm/unistd.h b/arch/csky/include/uapi/asm/unistd.h
index ec60e49cea66..211c983c7282 100644
--- a/arch/csky/include/uapi/asm/unistd.h
+++ b/arch/csky/include/uapi/asm/unistd.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 1f730ded5224..cc88a08bc1f7 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -398,6 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
default:
dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
clock_rate);
+ /* fall through */
case 100000000:
mpll_mul = 0x19;
if (ref_clk_sel < 2)
diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c
index e0dd66881da6..f777e44653d5 100644
--- a/arch/mips/kernel/cacheinfo.c
+++ b/arch/mips/kernel/cacheinfo.c
@@ -69,6 +69,8 @@ static int __populate_cache_leaves(unsigned int cpu)
if (c->tcache.waysize)
populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED);
+ this_cpu_ci->cpu_map_populated = true;
+
return 0;
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 5f209f111e59..df7ddd246eaa 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -32,7 +32,8 @@ void __init setup_pit_timer(void)
static int __init init_pit_clocksource(void)
{
- if (num_possible_cpus() > 1) /* PIT does not scale! */
+ if (num_possible_cpus() > 1 || /* PIT does not scale! */
+ !clockevent_state_periodic(&i8253_clockevent))
return 0;
return clocksource_i8253_init();
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index e5de6bac8197..754094b40a75 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -140,6 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc,
/* These are unconditional and in j_format. */
case jal_op:
arch->gprs[31] = instpc + 8;
+ /* fall through */
case j_op:
epc += 4;
epc >>= 28;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 7c04b17f4a48..96c13a0ab078 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -172,12 +172,15 @@ static void mipsxx_cpu_setup(void *args)
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(reg.counter[3]);
+ /* fall through */
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(reg.counter[2]);
+ /* fall through */
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(reg.counter[1]);
+ /* fall through */
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(reg.counter[0]);
@@ -195,10 +198,13 @@ static void mipsxx_cpu_start(void *args)
switch (counters) {
case 4:
w_c0_perfctrl3(WHAT | reg.control[3]);
+ /* fall through */
case 3:
w_c0_perfctrl2(WHAT | reg.control[2]);
+ /* fall through */
case 2:
w_c0_perfctrl1(WHAT | reg.control[1]);
+ /* fall through */
case 1:
w_c0_perfctrl0(WHAT | reg.control[0]);
}
@@ -215,10 +221,13 @@ static void mipsxx_cpu_stop(void *args)
switch (counters) {
case 4:
w_c0_perfctrl3(0);
+ /* fall through */
case 3:
w_c0_perfctrl2(0);
+ /* fall through */
case 2:
w_c0_perfctrl1(0);
+ /* fall through */
case 1:
w_c0_perfctrl0(0);
}
@@ -236,6 +245,7 @@ static int mipsxx_perfcount_handler(void)
switch (counters) {
#define HANDLE_COUNTER(n) \
+ /* fall through */ \
case n + 1: \
control = r_c0_perfctrl ## n(); \
counter = r_c0_perfcntr ## n(); \
@@ -297,12 +307,15 @@ static void reset_counters(void *arg)
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(0);
+ /* fall through */
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(0);
+ /* fall through */
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(0);
+ /* fall through */
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(0);
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index d02eb9d16b55..925c72348fb6 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -474,6 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
if (PCI_SLOT(devfn) == 0)
return bcm_pcie_readl(PCIE_DLSTATUS_REG)
& DLSTATUS_PHYLINKUP;
+ /* else, fall through */
default:
return false;
}
diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h
index 14b1931be69c..b65b169778e3 100644
--- a/arch/mips/vdso/vdso.h
+++ b/arch/mips/vdso/vdso.h
@@ -9,6 +9,7 @@
#if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT)
/* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */
+#define BUILD_VDSO32_64
#undef CONFIG_64BIT
#define CONFIG_32BIT 1
#ifndef __ASSEMBLY__
diff --git a/arch/nds32/include/uapi/asm/auxvec.h b/arch/nds32/include/uapi/asm/auxvec.h
index b5d58ea8decb..bc0b92ab8c15 100644
--- a/arch/nds32/include/uapi/asm/auxvec.h
+++ b/arch/nds32/include/uapi/asm/auxvec.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef __ASM_AUXVEC_H
diff --git a/arch/nds32/include/uapi/asm/byteorder.h b/arch/nds32/include/uapi/asm/byteorder.h
index 511e653c709d..c264ef12c49c 100644
--- a/arch/nds32/include/uapi/asm/byteorder.h
+++ b/arch/nds32/include/uapi/asm/byteorder.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef __NDS32_BYTEORDER_H__
diff --git a/arch/nds32/include/uapi/asm/cachectl.h b/arch/nds32/include/uapi/asm/cachectl.h
index 73793662815c..31b9b439d819 100644
--- a/arch/nds32/include/uapi/asm/cachectl.h
+++ b/arch/nds32/include/uapi/asm/cachectl.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 1994, 1995, 1996 by Ralf Baechle
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef _ASM_CACHECTL
diff --git a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h b/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
index d54a5d6c6538..f17396db16ec 100644
--- a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
+++ b/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/* Copyright (C) 2005-2019 Andes Technology Corporation */
#ifndef _FP_UDF_IEX_CRTL_H
#define _FP_UDF_IEX_CRTL_H
diff --git a/arch/nds32/include/uapi/asm/param.h b/arch/nds32/include/uapi/asm/param.h
index 2977534a6bd3..48d00328d328 100644
--- a/arch/nds32/include/uapi/asm/param.h
+++ b/arch/nds32/include/uapi/asm/param.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef __ASM_NDS32_PARAM_H
diff --git a/arch/nds32/include/uapi/asm/ptrace.h b/arch/nds32/include/uapi/asm/ptrace.h
index 1a6e01c00e6f..d76217c7c010 100644
--- a/arch/nds32/include/uapi/asm/ptrace.h
+++ b/arch/nds32/include/uapi/asm/ptrace.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef __UAPI_ASM_NDS32_PTRACE_H
diff --git a/arch/nds32/include/uapi/asm/sigcontext.h b/arch/nds32/include/uapi/asm/sigcontext.h
index dc89af7ddcc3..6c1e6648878f 100644
--- a/arch/nds32/include/uapi/asm/sigcontext.h
+++ b/arch/nds32/include/uapi/asm/sigcontext.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#ifndef _ASMNDS32_SIGCONTEXT_H
diff --git a/arch/nds32/include/uapi/asm/unistd.h b/arch/nds32/include/uapi/asm/unistd.h
index a0b2f7b9c0f2..410795e280fe 100644
--- a/arch/nds32/include/uapi/asm/unistd.h
+++ b/arch/nds32/include/uapi/asm/unistd.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
// Copyright (C) 2005-2017 Andes Technology Corporation
#define __ARCH_WANT_STAT64
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 8acb8fa1f8d6..3b77d729057f 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -19,8 +19,6 @@
KBUILD_IMAGE := vmlinuz
-KBUILD_DEFCONFIG := default_defconfig
-
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
@@ -182,5 +180,8 @@ define archhelp
@echo ' zinstall - Install compressed vmlinuz kernel'
endef
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
archheaders:
$(Q)$(MAKE) $(build)=arch/parisc/kernel/syscalls all
diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile
index 2da8624e5cf6..1e5879c6a752 100644
--- a/arch/parisc/boot/compressed/Makefile
+++ b/arch/parisc/boot/compressed/Makefile
@@ -12,6 +12,7 @@ UBSAN_SANITIZE := n
targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2
targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4
targets += misc.o piggy.o sizes.h head.o real2.o firmware.o
+targets += real2.S firmware.c
KBUILD_CFLAGS := -D__KERNEL__ -O2 -DBOOTLOADER
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
@@ -55,7 +56,8 @@ $(obj)/misc.o: $(obj)/sizes.h
CPPFLAGS_vmlinux.lds += -I$(objtree)/$(obj) -DBOOTLOADER
$(obj)/vmlinux.lds: $(obj)/sizes.h
-$(obj)/vmlinux.bin: vmlinux
+OBJCOPYFLAGS_vmlinux.bin := -R .comment -R .note -S
+$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
vmlinux.bin.all-y := $(obj)/vmlinux.bin
diff --git a/arch/parisc/boot/compressed/vmlinux.lds.S b/arch/parisc/boot/compressed/vmlinux.lds.S
index bfd7872739a3..2ac3a643f2eb 100644
--- a/arch/parisc/boot/compressed/vmlinux.lds.S
+++ b/arch/parisc/boot/compressed/vmlinux.lds.S
@@ -48,8 +48,8 @@ SECTIONS
*(.rodata.compressed)
}
- /* bootloader code and data starts behind area of extracted kernel */
- . = (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START);
+ /* bootloader code and data starts at least behind area of extracted kernel */
+ . = MAX(ABSOLUTE(.), (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START));
/* align on next page boundary */
. = ALIGN(4096);
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/defconfig
index 5b877ca34ebf..5b877ca34ebf 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/defconfig
diff --git a/arch/parisc/include/asm/kprobes.h b/arch/parisc/include/asm/kprobes.h
index e09cf2deeafe..904034da4974 100644
--- a/arch/parisc/include/asm/kprobes.h
+++ b/arch/parisc/include/asm/kprobes.h
@@ -50,6 +50,10 @@ struct kprobe_ctlblk {
int __kprobes parisc_kprobe_break_handler(struct pt_regs *regs);
int __kprobes parisc_kprobe_ss_handler(struct pt_regs *regs);
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ return 0;
+}
#endif /* CONFIG_KPROBES */
#endif /* _PARISC_KPROBES_H */
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index d784ccdd8fef..b6fb30f2e4bf 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -181,8 +181,9 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
for (i = 0; i < ARRAY_SIZE(insn); i++)
insn[i] = INSN_NOP;
+ __patch_text((void *)rec->ip, INSN_NOP);
__patch_text_multiple((void *)rec->ip + 4 - sizeof(insn),
- insn, sizeof(insn));
+ insn, sizeof(insn)-4);
return 0;
}
#endif
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index ba67893a1d72..df46b0e5a915 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -63,7 +63,7 @@ ENTRY_CFI(flush_tlb_all_local)
/* Flush Instruction Tlb */
- LDREG ITLB_SID_BASE(%r1), %r20
+88: LDREG ITLB_SID_BASE(%r1), %r20
LDREG ITLB_SID_STRIDE(%r1), %r21
LDREG ITLB_SID_COUNT(%r1), %r22
LDREG ITLB_OFF_BASE(%r1), %arg0
@@ -103,6 +103,7 @@ fitonemiddle: /* Loop if LOOP = 1 */
add %r21, %r20, %r20 /* increment space */
fitdone:
+ ALTERNATIVE(88b, fitdone, ALT_COND_NO_SPLIT_TLB, INSN_NOP)
/* Flush Data Tlb */
diff --git a/arch/parisc/math-emu/Makefile b/arch/parisc/math-emu/Makefile
index b6c4b254901a..55c1396580a4 100644
--- a/arch/parisc/math-emu/Makefile
+++ b/arch/parisc/math-emu/Makefile
@@ -18,3 +18,4 @@ obj-y := frnd.o driver.o decode_exc.o fpudispatch.o denormal.o \
# other very old or stripped-down PA-RISC CPUs -- not currently supported
obj-$(CONFIG_MATH_EMULATION) += unimplemented-math-emulation.o
+CFLAGS_REMOVE_fpudispatch.o = -Wimplicit-fallthrough=3
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 6dd4669ce7a5..adbd5e2144a3 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -66,6 +66,7 @@ parisc_acctyp(unsigned long code, unsigned int inst)
case 0x30000000: /* coproc2 */
if (bit22set(inst))
return VM_WRITE;
+ /* fall through */
case 0x0: /* indexed/memory management */
if (bit22set(inst)) {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d8dcd8820369..77f6ebf97113 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -121,6 +121,7 @@ config PPC
select ARCH_32BIT_OFF_T if PPC32
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEVMEM_IS_ALLOWED
+ select ARCH_HAS_DMA_MMAP_PGPROT
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 463c63a9fcf1..11112023e327 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -302,9 +302,14 @@
#define H_SCM_UNBIND_MEM 0x3F0
#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4
#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8
-#define H_SCM_MEM_QUERY 0x3FC
-#define H_SCM_BLOCK_CLEAR 0x400
-#define MAX_HCALL_OPCODE H_SCM_BLOCK_CLEAR
+#define H_SCM_UNBIND_ALL 0x3FC
+#define H_SCM_HEALTH 0x400
+#define H_SCM_PERFORMANCE_STATS 0x418
+#define MAX_HCALL_OPCODE H_SCM_PERFORMANCE_STATS
+
+/* Scope args for H_SCM_UNBIND_ALL */
+#define H_UNBIND_SCOPE_ALL (0x1)
+#define H_UNBIND_SCOPE_DRC (0x2)
/* H_VIOCTL functions */
#define H_GET_VIOA_DUMP_SIZE 0x01
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index dc9a1ca70edf..c6bbe9778d3c 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -27,11 +27,10 @@ static inline void ppc_set_pmu_inuse(int inuse)
#ifdef CONFIG_PPC_PSERIES
get_lppaca()->pmcregs_in_use = inuse;
#endif
- } else {
+ }
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
- get_paca()->pmcregs_in_use = inuse;
+ get_paca()->pmcregs_in_use = inuse;
#endif
- }
#endif
}
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 68473c3c471c..b0720c7c3fcf 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -49,6 +49,7 @@
#define __ARCH_WANT_SYS_FORK
#define __ARCH_WANT_SYS_VFORK
#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/uapi/asm/bpf_perf_event.h b/arch/powerpc/include/uapi/asm/bpf_perf_event.h
index b551b741653d..5e1e648aeec4 100644
--- a/arch/powerpc/include/uapi/asm/bpf_perf_event.h
+++ b/arch/powerpc/include/uapi/asm/bpf_perf_event.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
#define _UAPI__ASM_BPF_PERF_EVENT_H__
diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h
index 01555c6ae0f5..be48c2215fa2 100644
--- a/arch/powerpc/include/uapi/asm/kvm_para.h
+++ b/arch/powerpc/include/uapi/asm/kvm_para.h
@@ -31,7 +31,7 @@
* Struct fields are always 32 or 64 bit aligned, depending on them being 32
* or 64 bit wide respectively.
*
- * See Documentation/virtual/kvm/ppc-pv.txt
+ * See Documentation/virt/kvm/ppc-pv.txt
*/
struct kvm_vcpu_arch_shared {
__u64 scratch1;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 56dfa7a2a6f2..ea0c69236789 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -49,7 +49,8 @@ obj-y := cputable.o ptrace.o syscalls.o \
signal.o sysfs.o cacheinfo.o time.o \
prom.o traps.o setup-common.o \
udbg.o misc.o io.o misc_$(BITS).o \
- of_platform.o prom_parse.o
+ of_platform.o prom_parse.o \
+ dma-common.o
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 7107ad86de65..92045ed64976 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -176,9 +176,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
ret |= __get_user_inatomic(temp.v[1], p++);
ret |= __get_user_inatomic(temp.v[2], p++);
ret |= __get_user_inatomic(temp.v[3], p++);
+ /* fall through */
case 4:
ret |= __get_user_inatomic(temp.v[4], p++);
ret |= __get_user_inatomic(temp.v[5], p++);
+ /* fall through */
case 2:
ret |= __get_user_inatomic(temp.v[6], p++);
ret |= __get_user_inatomic(temp.v[7], p++);
@@ -259,9 +261,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
ret |= __put_user_inatomic(data.v[1], p++);
ret |= __put_user_inatomic(data.v[2], p++);
ret |= __put_user_inatomic(data.v[3], p++);
+ /* fall through */
case 4:
ret |= __put_user_inatomic(data.v[4], p++);
ret |= __put_user_inatomic(data.v[5], p++);
+ /* fall through */
case 2:
ret |= __put_user_inatomic(data.v[6], p++);
ret |= __put_user_inatomic(data.v[7], p++);
diff --git a/arch/powerpc/kernel/dma-common.c b/arch/powerpc/kernel/dma-common.c
new file mode 100644
index 000000000000..dc7ef6b17b69
--- /dev/null
+++ b/arch/powerpc/kernel/dma-common.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Contains common dma routines for all powerpc platforms.
+ *
+ * Copyright (C) 2019 Shawn Anastasio.
+ */
+
+#include <linux/mm.h>
+#include <linux/dma-noncoherent.h>
+
+pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot,
+ unsigned long attrs)
+{
+ if (!dev_is_dma_coherent(dev))
+ return pgprot_noncached(prot);
+ return prot;
+}
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 85fdb6d879f1..54fab22c9a43 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -597,6 +597,14 @@ ppc_clone:
stw r0,_TRAP(r1) /* register set saved */
b sys_clone
+ .globl ppc_clone3
+ppc_clone3:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_clone3
+
.globl ppc_swapcontext
ppc_swapcontext:
SAVE_NVGPRS(r1)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d9105fcf4021..0a0b5310f54a 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -487,6 +487,11 @@ _GLOBAL(ppc_clone)
bl sys_clone
b .Lsyscall_exit
+_GLOBAL(ppc_clone3)
+ bl save_nvgprs
+ bl sys_clone3
+ b .Lsyscall_exit
+
_GLOBAL(ppc32_swapcontext)
bl save_nvgprs
bl compat_sys_swapcontext
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eee5bef736c8..6ba3cc2ef8ab 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1531,7 +1531,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
*
* Call convention:
*
- * syscall register convention is in Documentation/powerpc/syscall64-abi.txt
+ * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
*
* For hypercalls, the register convention is as follows:
* r0 volatile
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index f50b708d6d77..98600b276f76 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1198,6 +1198,9 @@ SYSCALL_DEFINE0(rt_sigreturn)
goto bad;
if (MSR_TM_ACTIVE(msr_hi<<32)) {
+ /* Trying to start TM on non TM system */
+ if (!cpu_has_feature(CPU_FTR_TM))
+ goto bad;
/* We only recheckpoint on return if we're
* transaction.
*/
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 2f80e270c7b0..117515564ec7 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -771,6 +771,11 @@ SYSCALL_DEFINE0(rt_sigreturn)
if (MSR_TM_ACTIVE(msr)) {
/* We recheckpoint on return. */
struct ucontext __user *uc_transact;
+
+ /* Trying to start TM on non TM system */
+ if (!cpu_has_feature(CPU_FTR_TM))
+ goto badframe;
+
if (__get_user(uc_transact, &uc->uc_link))
goto badframe;
if (restore_tm_sigcontexts(current, &uc->uc_mcontext,
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 3331749aab20..43f736ed47f2 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -516,4 +516,4 @@
432 common fsmount sys_fsmount
433 common fspick sys_fspick
434 common pidfd_open sys_pidfd_open
-# 435 reserved for clone3
+435 nospu clone3 ppc_clone3
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
index 653936177857..18f244aad7aa 100644
--- a/arch/powerpc/kvm/book3s_32_mmu.c
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -239,6 +239,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr,
case 2:
case 6:
pte->may_write = true;
+ /* fall through */
case 3:
case 5:
case 7:
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index ec1804f822af..cde3f5a4b3e4 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3569,9 +3569,18 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
mtspr(SPRN_DEC, vcpu->arch.dec_expires - mftb());
if (kvmhv_on_pseries()) {
+ /*
+ * We need to save and restore the guest visible part of the
+ * psscr (i.e. using SPRN_PSSCR_PR) since the hypervisor
+ * doesn't do this for us. Note only required if pseries since
+ * this is done in kvmhv_load_hv_regs_and_go() below otherwise.
+ */
+ unsigned long host_psscr;
/* call our hypervisor to load up HV regs and go */
struct hv_guest_state hvregs;
+ host_psscr = mfspr(SPRN_PSSCR_PR);
+ mtspr(SPRN_PSSCR_PR, vcpu->arch.psscr);
kvmhv_save_hv_regs(vcpu, &hvregs);
hvregs.lpcr = lpcr;
vcpu->arch.regs.msr = vcpu->arch.shregs.msr;
@@ -3590,6 +3599,8 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
vcpu->arch.shregs.msr = vcpu->arch.regs.msr;
vcpu->arch.shregs.dar = mfspr(SPRN_DAR);
vcpu->arch.shregs.dsisr = mfspr(SPRN_DSISR);
+ vcpu->arch.psscr = mfspr(SPRN_PSSCR_PR);
+ mtspr(SPRN_PSSCR_PR, host_psscr);
/* H_CEDE has to be handled now, not later */
if (trap == BOOK3S_INTERRUPT_SYSCALL && !vcpu->arch.nested &&
@@ -3654,6 +3665,8 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
vcpu->arch.vpa.dirty = 1;
save_pmu = lp->pmcregs_in_use;
}
+ /* Must save pmu if this guest is capable of running nested guests */
+ save_pmu |= nesting_enabled(vcpu->kvm);
kvmhv_save_guest_pmu(vcpu, save_pmu);
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index 6ca0d7376a9f..e3ba67095895 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -1986,10 +1986,8 @@ static int kvmppc_xive_create(struct kvm_device *dev, u32 type)
xive->single_escalation = xive_native_has_single_escalation();
- if (ret) {
- kfree(xive);
+ if (ret)
return ret;
- }
return 0;
}
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index 5596c8ec221a..a998823f68a3 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -1090,9 +1090,9 @@ static int kvmppc_xive_native_create(struct kvm_device *dev, u32 type)
xive->ops = &kvmppc_xive_native_ops;
if (ret)
- kfree(xive);
+ return ret;
- return ret;
+ return 0;
}
/*
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 9a5963e07a82..b8ad14bb1170 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1899,11 +1899,20 @@ void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
*
* For guests on platforms before POWER9, we clamp the it limit to 1G
* to avoid some funky things such as RTAS bugs etc...
+ *
+ * On POWER9 we limit to 1TB in case the host erroneously told us that
+ * the RMA was >1TB. Effective address bits 0:23 are treated as zero
+ * (meaning the access is aliased to zero i.e. addr = addr % 1TB)
+ * for virtual real mode addressing and so it doesn't make sense to
+ * have an area larger than 1TB as it can't be addressed.
*/
if (!early_cpu_has_feature(CPU_FTR_HVMODE)) {
ppc64_rma_size = first_memblock_size;
if (!early_cpu_has_feature(CPU_FTR_ARCH_300))
ppc64_rma_size = min_t(u64, ppc64_rma_size, 0x40000000);
+ else
+ ppc64_rma_size = min_t(u64, ppc64_rma_size,
+ 1UL << SID_SHIFT_1T);
/* Finally limit subsequent allocations */
memblock_set_current_limit(ppc64_rma_size);
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index 0d62be3cba47..74f4555a62ba 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -21,7 +21,7 @@ static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
__set_pte_at(&init_mm, va, ptep, pfn_pte(PHYS_PFN(pa), prot), 0);
}
-static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
+static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
{
pmd_t *pmd;
unsigned long k_cur, k_next;
@@ -35,7 +35,10 @@ static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_
if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte)
continue;
- new = pte_alloc_one_kernel(&init_mm);
+ if (slab_is_available())
+ new = pte_alloc_one_kernel(&init_mm);
+ else
+ new = memblock_alloc(PTE_FRAG_SIZE, PTE_FRAG_SIZE);
if (!new)
return -ENOMEM;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 9259337d7374..9191a66b3bc5 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -239,7 +239,7 @@ void __init paging_init(void)
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
- ((1UL << ARCH_ZONE_DMA_BITS) - 1) >> PAGE_SHIFT);
+ 1UL << (ARCH_ZONE_DMA_BITS - PAGE_SHIFT));
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index c8ec670ee924..a5ac371a3f06 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -11,6 +11,7 @@
#include <linux/sched.h>
#include <linux/libnvdimm.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <asm/plpar_wrappers.h>
@@ -43,8 +44,9 @@ struct papr_scm_priv {
static int drc_pmem_bind(struct papr_scm_priv *p)
{
unsigned long ret[PLPAR_HCALL_BUFSIZE];
- uint64_t rc, token;
uint64_t saved = 0;
+ uint64_t token;
+ int64_t rc;
/*
* When the hypervisor cannot map all the requested memory in a single
@@ -64,6 +66,10 @@ static int drc_pmem_bind(struct papr_scm_priv *p)
} while (rc == H_BUSY);
if (rc) {
+ /* H_OVERLAP needs a separate error path */
+ if (rc == H_OVERLAP)
+ return -EBUSY;
+
dev_err(&p->pdev->dev, "bind err: %lld\n", rc);
return -ENXIO;
}
@@ -78,22 +84,36 @@ static int drc_pmem_bind(struct papr_scm_priv *p)
static int drc_pmem_unbind(struct papr_scm_priv *p)
{
unsigned long ret[PLPAR_HCALL_BUFSIZE];
- uint64_t rc, token;
+ uint64_t token = 0;
+ int64_t rc;
- token = 0;
+ dev_dbg(&p->pdev->dev, "unbind drc %x\n", p->drc_index);
- /* NB: unbind has the same retry requirements mentioned above */
+ /* NB: unbind has the same retry requirements as drc_pmem_bind() */
do {
- rc = plpar_hcall(H_SCM_UNBIND_MEM, ret, p->drc_index,
- p->bound_addr, p->blocks, token);
+
+ /* Unbind of all SCM resources associated with drcIndex */
+ rc = plpar_hcall(H_SCM_UNBIND_ALL, ret, H_UNBIND_SCOPE_DRC,
+ p->drc_index, token);
token = ret[0];
- cond_resched();
+
+ /* Check if we are stalled for some time */
+ if (H_IS_LONG_BUSY(rc)) {
+ msleep(get_longbusy_msecs(rc));
+ rc = H_BUSY;
+ } else if (rc == H_BUSY) {
+ cond_resched();
+ }
+
} while (rc == H_BUSY);
if (rc)
dev_err(&p->pdev->dev, "unbind error: %lld\n", rc);
+ else
+ dev_dbg(&p->pdev->dev, "unbind drc %x complete\n",
+ p->drc_index);
- return !!rc;
+ return rc == H_SUCCESS ? 0 : -ENXIO;
}
static int papr_scm_meta_get(struct papr_scm_priv *p,
@@ -255,12 +275,32 @@ static const struct attribute_group *papr_scm_dimm_groups[] = {
NULL,
};
+static inline int papr_scm_node(int node)
+{
+ int min_dist = INT_MAX, dist;
+ int nid, min_node;
+
+ if ((node == NUMA_NO_NODE) || node_online(node))
+ return node;
+
+ min_node = first_online_node;
+ for_each_online_node(nid) {
+ dist = node_distance(node, nid);
+ if (dist < min_dist) {
+ min_dist = dist;
+ min_node = nid;
+ }
+ }
+ return min_node;
+}
+
static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
{
struct device *dev = &p->pdev->dev;
struct nd_mapping_desc mapping;
struct nd_region_desc ndr_desc;
unsigned long dimm_flags;
+ int target_nid, online_nid;
p->bus_desc.ndctl = papr_scm_ndctl;
p->bus_desc.module = THIS_MODULE;
@@ -299,8 +339,10 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
memset(&ndr_desc, 0, sizeof(ndr_desc));
ndr_desc.attr_groups = region_attr_groups;
- ndr_desc.numa_node = dev_to_node(&p->pdev->dev);
- ndr_desc.target_node = ndr_desc.numa_node;
+ target_nid = dev_to_node(&p->pdev->dev);
+ online_nid = papr_scm_node(target_nid);
+ ndr_desc.numa_node = online_nid;
+ ndr_desc.target_node = target_nid;
ndr_desc.res = &p->res;
ndr_desc.of_node = p->dn;
ndr_desc.provider_data = p;
@@ -318,6 +360,9 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
ndr_desc.res, p->dn);
goto err;
}
+ if (target_nid != online_nid)
+ dev_info(dev, "Region registered with target node %d and online node %d",
+ target_nid, online_nid);
return 0;
@@ -389,6 +434,14 @@ static int papr_scm_probe(struct platform_device *pdev)
/* request the hypervisor to bind this region to somewhere in memory */
rc = drc_pmem_bind(p);
+
+ /* If phyp says drc memory still bound then force unbound and retry */
+ if (rc == -EBUSY) {
+ dev_warn(&pdev->dev, "Retrying bind after unbinding\n");
+ drc_pmem_unbind(p);
+ rc = drc_pmem_bind(p);
+ }
+
if (rc)
goto err;
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 082c7e1c20f0..1cdb39575eae 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -479,7 +479,7 @@ static int xive_find_target_in_mask(const struct cpumask *mask,
* Now go through the entire mask until we find a valid
* target.
*/
- for (;;) {
+ do {
/*
* We re-check online as the fallback case passes us
* an untested affinity mask
@@ -487,12 +487,11 @@ static int xive_find_target_in_mask(const struct cpumask *mask,
if (cpu_online(cpu) && xive_try_pick_target(cpu))
return cpu;
cpu = cpumask_next(cpu, mask);
- if (cpu == first)
- break;
/* Wrap around */
if (cpu >= nr_cpu_ids)
cpu = cpumask_first(mask);
- }
+ } while (cpu != first);
+
return -1;
}
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 40983491b95f..42b5ec223100 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -21,7 +21,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- timebase-frequency = <1000000>;
cpu0: cpu@0 {
compatible = "sifive,e51", "sifive,rocket0", "riscv";
device_type = "cpu";
@@ -217,5 +216,20 @@
#size-cells = <0>;
status = "disabled";
};
+ eth0: ethernet@10090000 {
+ compatible = "sifive,fu540-c000-gem";
+ interrupt-parent = <&plic0>;
+ interrupts = <53>;
+ reg = <0x0 0x10090000 0x0 0x2000
+ 0x0 0x100a0000 0x0 0x1000>;
+ local-mac-address = [00 00 00 00 00 00];
+ clock-names = "pclk", "hclk";
+ clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+ <&prci PRCI_CLK_GEMGXLPLL>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
};
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 0b55c53c08c7..93d68cbd64fe 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -76,3 +76,12 @@
disable-wp;
};
};
+
+&eth0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index b7b749b18853..93205c0bf71d 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -34,6 +34,7 @@ CONFIG_PCIEPORTBUS=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_SD=y
@@ -53,6 +54,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_HVC_RISCV_SBI=y
+CONFIG_SPI=y
+CONFIG_SPI_SIFIVE=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
@@ -66,8 +69,9 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
CONFIG_VIRTIO_MMIO=y
-CONFIG_SPI_SIFIVE=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_AUTOFS4_FS=y
@@ -83,8 +87,4 @@ CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_PRINTK_TIME=y
-CONFIG_SPI=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC=y
-CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_RCU_TRACE is not set
diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 1efaeddf1e4b..16970f246860 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -22,6 +22,7 @@ generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mm-arch-hooks.h
+generic-y += msi.h
generic-y += percpu.h
generic-y += preempt.h
generic-y += sections.h
diff --git a/arch/riscv/include/uapi/asm/auxvec.h b/arch/riscv/include/uapi/asm/auxvec.h
index 62716653554b..d86cb17bbabe 100644
--- a/arch/riscv/include/uapi/asm/auxvec.h
+++ b/arch/riscv/include/uapi/asm/auxvec.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 ARM Ltd.
* Copyright (C) 2015 Regents of the University of California
diff --git a/arch/riscv/include/uapi/asm/bitsperlong.h b/arch/riscv/include/uapi/asm/bitsperlong.h
index 0b9b58b57ff6..7d0b32e3b701 100644
--- a/arch/riscv/include/uapi/asm/bitsperlong.h
+++ b/arch/riscv/include/uapi/asm/bitsperlong.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 ARM Ltd.
* Copyright (C) 2015 Regents of the University of California
diff --git a/arch/riscv/include/uapi/asm/byteorder.h b/arch/riscv/include/uapi/asm/byteorder.h
index 1920debc09c0..f671e16bf6af 100644
--- a/arch/riscv/include/uapi/asm/byteorder.h
+++ b/arch/riscv/include/uapi/asm/byteorder.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 ARM Ltd.
* Copyright (C) 2015 Regents of the University of California
diff --git a/arch/riscv/include/uapi/asm/hwcap.h b/arch/riscv/include/uapi/asm/hwcap.h
index 7d786145183b..4e7646077056 100644
--- a/arch/riscv/include/uapi/asm/hwcap.h
+++ b/arch/riscv/include/uapi/asm/hwcap.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copied from arch/arm64/include/asm/hwcap.h
*
diff --git a/arch/riscv/include/uapi/asm/ptrace.h b/arch/riscv/include/uapi/asm/ptrace.h
index 92d8f7cd8f84..882547f6bd5c 100644
--- a/arch/riscv/include/uapi/asm/ptrace.h
+++ b/arch/riscv/include/uapi/asm/ptrace.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 Regents of the University of California
*/
diff --git a/arch/riscv/include/uapi/asm/sigcontext.h b/arch/riscv/include/uapi/asm/sigcontext.h
index 053f809e52ce..84f2dfcfdbce 100644
--- a/arch/riscv/include/uapi/asm/sigcontext.h
+++ b/arch/riscv/include/uapi/asm/sigcontext.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 Regents of the University of California
*/
diff --git a/arch/riscv/include/uapi/asm/ucontext.h b/arch/riscv/include/uapi/asm/ucontext.h
index b58e00cee2ec..411dd7b52ed6 100644
--- a/arch/riscv/include/uapi/asm/ucontext.h
+++ b/arch/riscv/include/uapi/asm/ucontext.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Copyright (C) 2012 ARM Ltd.
* Copyright (C) 2017 SiFive, Inc.
diff --git a/arch/riscv/include/uapi/asm/unistd.h b/arch/riscv/include/uapi/asm/unistd.h
index 0e2eeeb1fd27..13ce76cc5aff 100644
--- a/arch/riscv/include/uapi/asm/unistd.h
+++ b/arch/riscv/include/uapi/asm/unistd.h
@@ -18,6 +18,7 @@
#ifdef __LP64__
#define __ARCH_WANT_NEW_STAT
#define __ARCH_WANT_SET_GET_RLIMIT
+#define __ARCH_WANT_SYS_CLONE3
#endif /* __LP64__ */
#include <asm-generic/unistd.h>
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index f1d6ffe43e42..49a5852fd07d 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -37,7 +37,7 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
# these symbols in the kernel code rather than hand-coded addresses.
SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
- -Wl,--hash-style=both
+ -Wl,--build-id -Wl,--hash-style=both
$(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
$(call if_changed,vdsold)
diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile
index 7cba96e7587b..4cf0bddb7d92 100644
--- a/arch/s390/boot/Makefile
+++ b/arch/s390/boot/Makefile
@@ -36,7 +36,7 @@ CFLAGS_sclp_early_core.o += -I$(srctree)/drivers/s390/char
obj-y := head.o als.o startup.o mem_detect.o ipl_parm.o ipl_report.o
obj-y += string.o ebcdic.o sclp_early_core.o mem.o ipl_vmparm.o cmdline.o
-obj-y += ctype.o text_dma.o
+obj-y += version.o ctype.o text_dma.o
obj-$(CONFIG_PROTECTED_VIRTUALIZATION_GUEST) += uv.o
obj-$(CONFIG_RELOCATABLE) += machine_kexec_reloc.o
obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h
index ad57c2205a71..1c3b2b257637 100644
--- a/arch/s390/boot/boot.h
+++ b/arch/s390/boot/boot.h
@@ -8,10 +8,12 @@ void store_ipl_parmblock(void);
void setup_boot_command_line(void);
void parse_boot_command_line(void);
void setup_memory_end(void);
+void verify_facilities(void);
void print_missing_facilities(void);
unsigned long get_random_base(unsigned long safe_addr);
extern int kaslr_enabled;
+extern const char kernel_version[];
unsigned long read_ipl_report(unsigned long safe_offset);
diff --git a/arch/s390/boot/head.S b/arch/s390/boot/head.S
index 028aab03a9e7..2087bed6e60f 100644
--- a/arch/s390/boot/head.S
+++ b/arch/s390/boot/head.S
@@ -361,6 +361,7 @@ ENTRY(startup_kdump)
.quad 0 # INITRD_SIZE
.quad 0 # OLDMEM_BASE
.quad 0 # OLDMEM_SIZE
+ .quad kernel_version # points to kernel version string
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
diff --git a/arch/s390/boot/kaslr.c b/arch/s390/boot/kaslr.c
index 3bdd8132e56b..c34a6387ce38 100644
--- a/arch/s390/boot/kaslr.c
+++ b/arch/s390/boot/kaslr.c
@@ -7,6 +7,7 @@
#include <asm/timex.h>
#include <asm/sclp.h>
#include "compressed/decompressor.h"
+#include "boot.h"
#define PRNG_MODE_TDES 1
#define PRNG_MODE_SHA512 2
diff --git a/arch/s390/boot/version.c b/arch/s390/boot/version.c
new file mode 100644
index 000000000000..d32e58bdda6a
--- /dev/null
+++ b/arch/s390/boot/version.c
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <generated/utsrelease.h>
+#include <generated/compile.h>
+#include "boot.h"
+
+const char kernel_version[] = UTS_RELEASE
+ " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " UTS_VERSION;
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index e26d4413d34c..74e78ec5beb6 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
@@ -18,55 +19,71 @@ CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
+CONFIG_LIVEPATCH=y
+CONFIG_TUNE_ZEC12=y
+CONFIG_NR_CPUS=512
+CONFIG_NUMA=y
+CONFIG_HZ_100=y
+CONFIG_KEXEC_FILE=y
+CONFIG_EXPOLINE=y
+CONFIG_EXPOLINE_AUTO=y
+CONFIG_CHSC_SCH=y
+CONFIG_VFIO_CCW=m
+CONFIG_VFIO_AP=m
+CONFIG_CRASH_DUMP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_DEBUG=y
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULE_SIG=y
+CONFIG_MODULE_SIG_SHA256=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
-CONFIG_BLK_WBT_SQ=y
+CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_LIVEPATCH=y
-CONFIG_TUNE_ZEC12=y
-CONFIG_NR_CPUS=512
-CONFIG_NUMA=y
-CONFIG_PREEMPT=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC_FILE=y
-CONFIG_KEXEC_VERIFY_SIG=y
-CONFIG_EXPOLINE=y
-CONFIG_EXPOLINE_AUTO=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
+CONFIG_BINFMT_MISC=m
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
@@ -82,17 +99,8 @@ CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_S390=y
-CONFIG_CHSC_SCH=y
-CONFIG_VFIO_AP=m
-CONFIG_VFIO_CCW=m
-CONFIG_CRASH_DUMP=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HIBERNATION=y
-CONFIG_PM_DEBUG=y
+CONFIG_PERCPU_STATS=y
+CONFIG_GUP_BENCHMARK=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
@@ -121,9 +129,6 @@ CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
@@ -139,10 +144,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_GRE=m
@@ -264,11 +265,8 @@ CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_PE_SIP=m
-CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=y
-CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_TABLES_ARP=y
-CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -287,10 +285,7 @@ CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=y
-CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -309,7 +304,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=y
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
@@ -375,9 +370,11 @@ CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
CONFIG_DEVTMPFS=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CONNECTOR=y
CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=m
@@ -395,7 +392,6 @@ CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
@@ -415,17 +411,19 @@ CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
+CONFIG_MD_CLUSTER=m
+CONFIG_BCACHE=m
CONFIG_BLK_DEV_DM=m
+CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_WRITECACHE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
@@ -445,23 +443,78 @@ CONFIG_EQUALIZER=m
CONFIG_IFB=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
-CONFIG_VXLAN=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_AGERE is not set
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
+# CONFIG_MLXFW is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETERION is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
@@ -473,10 +526,13 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_NULL_TTY=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
CONFIG_TN3270_FS=y
+CONFIG_PPS=m
+# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -498,8 +554,8 @@ CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
-CONFIG_S390_AP_IOMMU=y
CONFIG_S390_CCW_IOMMU=y
+CONFIG_S390_AP_IOMMU=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
@@ -519,6 +575,7 @@ CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_DEBUG=y
+CONFIG_BTRFS_ASSERT=y
CONFIG_NILFS2_FS=m
CONFIG_FS_DAX=y
CONFIG_EXPORTFS_BLOCK_OPS=y
@@ -552,8 +609,10 @@ CONFIG_ECRYPT_FS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_ZSTD=y
CONFIG_ROMFS_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3_ACL=y
@@ -564,7 +623,6 @@ CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
@@ -580,19 +638,112 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
+CONFIG_UNICODE=y
+CONFIG_PERSISTENT_KEYRINGS=y
+CONFIG_BIG_KEYS=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_INTEGRITY_SIGNATURE=y
+CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
+CONFIG_IMA=y
+CONFIG_IMA_DEFAULT_HASH_SHA256=y
+CONFIG_IMA_WRITE_POLICY=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
+CONFIG_CRYPTO_ECRDSA=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_AEGIS128L=m
+CONFIG_CRYPTO_AEGIS256=m
+CONFIG_CRYPTO_MORUS640=m
+CONFIG_CRYPTO_MORUS1280=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_XXHASH=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_842=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ZSTD=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_STATS=y
+CONFIG_ZCRYPT=m
+CONFIG_PKEY=m
+CONFIG_CRYPTO_PAES_S390=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_CRYPTO_CRC32_S390=y
+CONFIG_CORDIC=m
+CONFIG_CRC32_SELFTEST=y
+CONFIG_CRC4=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_RANDOM32_SELFTEST=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=0
+CONFIG_DMA_API_DEBUG=y
+CONFIG_STRING_SELFTEST=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
-CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_HEADERS_INSTALL=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
@@ -645,7 +796,6 @@ CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_HIST_TRIGGERS=y
-CONFIG_DMA_API_DEBUG=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_SORT=y
@@ -657,85 +807,3 @@ CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_BPF=m
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_S390_PTDUMP=y
-CONFIG_PERSISTENT_KEYRINGS=y
-CONFIG_BIG_KEYS=y
-CONFIG_ENCRYPTED_KEYS=m
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_FORTIFY_SOURCE=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_INTEGRITY_SIGNATURE=y
-CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
-CONFIG_IMA=y
-CONFIG_IMA_DEFAULT_HASH_SHA256=y
-CONFIG_IMA_WRITE_POLICY=y
-CONFIG_IMA_APPRAISE=y
-CONFIG_CRYPTO_DH=m
-CONFIG_CRYPTO_ECDH=m
-CONFIG_CRYPTO_USER=m
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
-CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES_TI=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_842=m
-CONFIG_CRYPTO_LZ4=m
-CONFIG_CRYPTO_LZ4HC=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_USER_API_RNG=m
-CONFIG_CRYPTO_USER_API_AEAD=m
-CONFIG_ZCRYPT=m
-CONFIG_PKEY=m
-CONFIG_CRYPTO_PAES_S390=m
-CONFIG_CRYPTO_SHA1_S390=m
-CONFIG_CRYPTO_SHA256_S390=m
-CONFIG_CRYPTO_SHA512_S390=m
-CONFIG_CRYPTO_DES_S390=m
-CONFIG_CRYPTO_AES_S390=m
-CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_CRYPTO_CRC32_S390=y
-CONFIG_PKCS7_MESSAGE_PARSER=y
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_CRC7=m
-CONFIG_CRC8=m
-CONFIG_RANDOM32_SELFTEST=y
-CONFIG_CORDIC=m
-CONFIG_CMM=m
-CONFIG_APPLDATA_BASE=y
-CONFIG_KVM=m
-CONFIG_KVM_S390_UCONTROL=y
-CONFIG_VHOST_NET=m
-CONFIG_VHOST_VSOCK=m
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index e4bc40073003..68d3ca83302b 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -12,30 +12,51 @@ CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NUMA_BALANCING=y
-# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
+CONFIG_LIVEPATCH=y
+CONFIG_TUNE_ZEC12=y
+CONFIG_NR_CPUS=512
+CONFIG_NUMA=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_HZ_100=y
+CONFIG_KEXEC_FILE=y
+CONFIG_EXPOLINE=y
+CONFIG_EXPOLINE_AUTO=y
+CONFIG_CHSC_SCH=y
+CONFIG_VFIO_CCW=m
+CONFIG_VFIO_AP=m
+CONFIG_CRASH_DUMP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_DEBUG=y
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
@@ -47,27 +68,18 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_SHA256=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
-CONFIG_BLK_WBT_SQ=y
+CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_LIVEPATCH=y
-CONFIG_TUNE_ZEC12=y
-CONFIG_NR_CPUS=512
-CONFIG_NUMA=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC_FILE=y
-CONFIG_KEXEC_VERIFY_SIG=y
-CONFIG_EXPOLINE=y
-CONFIG_EXPOLINE_AUTO=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
+CONFIG_BINFMT_MISC=m
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
@@ -81,16 +93,8 @@ CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_S390=y
-CONFIG_CHSC_SCH=y
-CONFIG_VFIO_AP=m
-CONFIG_VFIO_CCW=m
-CONFIG_CRASH_DUMP=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HIBERNATION=y
-CONFIG_PM_DEBUG=y
+CONFIG_PERCPU_STATS=y
+CONFIG_GUP_BENCHMARK=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
@@ -119,9 +123,6 @@ CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
@@ -137,10 +138,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_GRE=m
@@ -262,11 +259,8 @@ CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_PE_SIP=m
-CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=y
-CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_TABLES_ARP=y
-CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -285,10 +279,7 @@ CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=y
-CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -307,7 +298,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=y
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
@@ -372,9 +363,11 @@ CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_UEVENT_HELPER=y
CONFIG_DEVTMPFS=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CONNECTOR=y
CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=m
@@ -383,6 +376,7 @@ CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XPRAM is not set
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_NVME=m
@@ -392,7 +386,6 @@ CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
@@ -412,17 +405,19 @@ CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
+CONFIG_MD_CLUSTER=m
+CONFIG_BCACHE=m
CONFIG_BLK_DEV_DM=m
+CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_WRITECACHE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
@@ -435,6 +430,7 @@ CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
+CONFIG_DM_INTEGRITY=m
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
@@ -442,23 +438,78 @@ CONFIG_EQUALIZER=m
CONFIG_IFB=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
-CONFIG_VXLAN=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_AGERE is not set
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
+# CONFIG_MLXFW is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETERION is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_N