aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-03-11 07:49:37 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-03-11 07:49:37 -0700
commit152fcb2784c9305e19e7caee2932b9e32b0a1d41 (patch)
treea8fceed3656ea2e7ef6a3c2f5afb450cf7620bdd
parentLinux 3.9-rc2 (diff)
parentInput: mms114 - Fix regulator enable and disable paths (diff)
downloadlinux-dev-152fcb2784c9305e19e7caee2932b9e32b0a1d41.tar.xz
linux-dev-152fcb2784c9305e19e7caee2932b9e32b0a1d41.zip
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
-rw-r--r--Documentation/input/alps.txt67
-rw-r--r--drivers/input/keyboard/tc3589x-keypad.c8
-rw-r--r--drivers/input/mouse/alps.c85
-rw-r--r--drivers/input/mouse/alps.h1
-rw-r--r--drivers/input/mouse/cypress_ps2.c19
-rw-r--r--drivers/input/tablet/wacom_wac.c4
-rw-r--r--drivers/input/touchscreen/ads7846.c7
-rw-r--r--drivers/input/touchscreen/mms114.c34
8 files changed, 185 insertions, 40 deletions
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index 3262b6e4d686..e544c7ff8cfa 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -3,10 +3,26 @@ ALPS Touchpad Protocol
Introduction
------------
-
-Currently the ALPS touchpad driver supports four protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
-protocol versions is contained in the following sections.
+Currently the ALPS touchpad driver supports five protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+
+Since roughly mid-2010 several new ALPS touchpads have been released and
+integrated into a variety of laptops and netbooks. These new touchpads
+have enough behavior differences that the alps_model_data definition
+table, describing the properties of the different versions, is no longer
+adequate. The design choices were to re-define the alps_model_data
+table, with the risk of regression testing existing devices, or isolate
+the new devices outside of the alps_model_data table. The latter design
+choice was made. The new touchpad signatures are named: "Rushmore",
+"Pinnacle", and "Dolphin", which you will see in the alps.c code.
+For the purposes of this document, this group of ALPS touchpads will
+generically be called "new ALPS touchpads".
+
+We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
+(Compatibility ID) definition as a way to uniquely identify the
+different ALPS variants but there did not appear to be a 1:1 mapping.
+In fact, it appeared to be an m:n mapping between the _HID and actual
+hardware type.
Detection
---------
@@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
-With protocol versions 3 and 4, the E7 report model signature is always
-73-02-64. To differentiate between these versions, the response from the
-"Enter Command Mode" sequence must be inspected as described below.
+For older touchpads supporting protocol versions 3 and 4, the E7 report
+model signature is always 73-02-64. To differentiate between these
+versions, the response from the "Enter Command Mode" sequence must be
+inspected as described below.
+
+The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
+seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
@@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
+For the new ALPS touchpads, the EC command is used to enter command
+mode. The response in the new ALPS touchpads is significantly different,
+and more important in determining the behavior. This code has been
+separated from the original alps_model_data table and put in the
+alps_identify function. For example, there seem to be two hardware init
+sequences for the "Dolphin" touchpads as determined by the second byte
+of the EC response.
+
Packet Format
-------------
@@ -187,3 +215,28 @@ There are several things worth noting here.
well.
So far no v4 devices with tracksticks have been encountered.
+
+ALPS Absolute Mode - Protocol Version 5
+---------------------------------------
+This is basically Protocol Version 3 but with different logic for packet
+decode. It uses the same alps_process_touchpad_packet_v3 call with a
+specialized decode_fields function pointer to correctly interpret the
+packets. This appears to only be used by the Dolphin devices.
+
+For single-touch, the 6-byte packet format is:
+
+ byte 0: 1 1 0 0 1 0 0 0
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 3: 0 M R L 1 m r l
+ byte 4: y10 y9 y8 y7 x10 x9 x8 x7
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+For mt, the format is:
+
+ byte 0: 1 1 1 n3 1 n2 n1 x24
+ byte 1: 1 y7 y6 y5 y4 y3 y2 y1
+ byte 2: ? x2 x1 y12 y11 y10 y9 y8
+ byte 3: 0 x23 x22 x21 x20 x19 x18 x17
+ byte 4: 0 x9 x8 x7 x6 x5 x4 x3
+ byte 5: 0 x16 x15 x14 x13 x12 x11 x10
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 2fb0d76a04c4..208de7cbb7fa 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -70,8 +70,6 @@
#define TC3589x_EVT_INT_CLR 0x2
#define TC3589x_KBD_INT_CLR 0x1
-#define TC3589x_KBD_KEYMAP_SIZE 64
-
/**
* struct tc_keypad - data structure used by keypad driver
* @tc3589x: pointer to tc35893
@@ -88,7 +86,7 @@ struct tc_keypad {
const struct tc3589x_keypad_platform_data *board;
unsigned int krow;
unsigned int kcol;
- unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+ unsigned short *keymap;
bool keypad_stopped;
};
@@ -338,12 +336,14 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
- keypad->keymap, input);
+ NULL, input);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
goto err_free_mem;
}
+ keypad->keymap = input->keycode;
+
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7b99fc7c9438..0238e0e14335 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
f->y_map |= (p[5] & 0x20) << 6;
}
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[0] & 0x02);
+ f->is_mp = !!(p[0] & 0x20);
+
+ f->fingers = ((p[0] & 0x6) >> 1 |
+ (p[0] & 0x10) >> 2);
+ f->x_map = ((p[2] & 0x60) >> 5) |
+ ((p[4] & 0x7f) << 2) |
+ ((p[5] & 0x7f) << 9) |
+ ((p[3] & 0x07) << 16) |
+ ((p[3] & 0x70) << 15) |
+ ((p[0] & 0x01) << 22);
+ f->y_map = (p[1] & 0x7f) |
+ ((p[2] & 0x1f) << 7);
+
+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
+ if (priv->proto_version != ALPS_PROTO_V5 &&
+ psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
@@ -994,8 +1018,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
return 0;
}
-static int alps_enter_command_mode(struct psmouse *psmouse,
- unsigned char *resp)
+static int alps_enter_command_mode(struct psmouse *psmouse)
{
unsigned char param[4];
@@ -1004,14 +1027,12 @@ static int alps_enter_command_mode(struct psmouse *psmouse,
return -1;
}
- if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
+ if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
+ param[0] != 0x73) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
}
-
- if (resp)
- *resp = param[2];
return 0;
}
@@ -1176,7 +1197,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse,
{
int reg_val, ret = -1;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
return -1;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
@@ -1216,7 +1237,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
{
int ret = -EIO, reg_val;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
@@ -1279,7 +1300,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
* supported by this driver. If bit 1 isn't set the packet
* format is different.
*/
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_write_reg(psmouse,
reg_base + 0x08, 0x82) ||
alps_exit_command_mode(psmouse))
@@ -1306,7 +1327,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
goto error;
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
@@ -1381,7 +1402,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
priv->flags &= ~ALPS_DUALPOINT;
}
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
goto error;
@@ -1431,7 +1452,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
if (alps_absolute_mode_v4(psmouse)) {
@@ -1499,6 +1520,23 @@ error:
return -1;
}
+static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[2];
+
+ /* This is dolphin "v1" as empirically defined by florin9doi */
+ param[0] = 0x64;
+ param[1] = 0x28;
+
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ return 0;
+}
+
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
@@ -1532,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv)
priv->nibble_commands = alps_v4_nibble_commands;
priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
+ case ALPS_PROTO_V5:
+ priv->hw_init = alps_hw_init_dolphin_v1;
+ priv->process_packet = alps_process_packet_v3;
+ priv->decode_fields = alps_decode_dolphin;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ priv->byte0 = 0xc8;
+ priv->mask0 = 0xc8;
+ priv->flags = 0;
+ priv->x_max = 1360;
+ priv->y_max = 660;
+ priv->x_bits = 23;
+ priv->y_bits = 12;
+ break;
}
}
@@ -1592,6 +1645,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
return 0;
+ } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+ ec[0] == 0x73 && ec[1] == 0x01) {
+ priv->proto_version = ALPS_PROTO_V5;
+ alps_set_defaults(priv);
+
+ return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
priv->proto_version = ALPS_PROTO_V3;
alps_set_defaults(priv);
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 970480551b6e..eee59853b9ce 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -16,6 +16,7 @@
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
+#define ALPS_PROTO_V5 5
/**
* struct alps_model_info - touchpad ID table
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 1673dc6c8092..f51765fff054 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -236,6 +236,13 @@ static int cypress_read_fw_version(struct psmouse *psmouse)
cytp->fw_version = param[2] & FW_VERSION_MASX;
cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
+ /*
+ * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to
+ * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594.
+ */
+ if (cytp->fw_version >= 11)
+ cytp->tp_metrics_supported = 0;
+
psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
cytp->tp_metrics_supported);
@@ -258,6 +265,9 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+ if (!cytp->tp_metrics_supported)
+ return 0;
+
memset(param, 0, sizeof(param));
if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
/* Update trackpad parameters. */
@@ -315,18 +325,15 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
static int cypress_query_hardware(struct psmouse *psmouse)
{
- struct cytp_data *cytp = psmouse->private;
int ret;
ret = cypress_read_fw_version(psmouse);
if (ret)
return ret;
- if (cytp->tp_metrics_supported) {
- ret = cypress_read_tp_metrics(psmouse);
- if (ret)
- return ret;
- }
+ ret = cypress_read_tp_metrics(psmouse);
+ if (ret)
+ return ret;
return 0;
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 41b6fbf60112..1daa97913b7d 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2017,6 +2017,9 @@ static const struct wacom_features wacom_features_0x100 =
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10D =
+ { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2201,6 +2204,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
+ { USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 4f702b3ec1a3..434c3df250ca 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -236,7 +236,12 @@ static void __ads7846_disable(struct ads7846 *ts)
/* Must be called with ts->lock held */
static void __ads7846_enable(struct ads7846 *ts)
{
- regulator_enable(ts->reg);
+ int error;
+
+ error = regulator_enable(ts->reg);
+ if (error != 0)
+ dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
ads7846_restart(ts);
}
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 4a29ddf6bf1e..1443532fe6c4 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -314,15 +314,27 @@ static int mms114_start(struct mms114_data *data)
struct i2c_client *client = data->client;
int error;
- if (data->core_reg)
- regulator_enable(data->core_reg);
- if (data->io_reg)
- regulator_enable(data->io_reg);
+ error = regulator_enable(data->core_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+ return error;
+ }
+
+ error = regulator_enable(data->io_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+ regulator_disable(data->core_reg);
+ return error;
+ }
+
mdelay(MMS114_POWERON_DELAY);
error = mms114_setup_regs(data);
- if (error < 0)
+ if (error < 0) {
+ regulator_disable(data->io_reg);
+ regulator_disable(data->core_reg);
return error;
+ }
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(true);
@@ -335,16 +347,20 @@ static int mms114_start(struct mms114_data *data)
static void mms114_stop(struct mms114_data *data)
{
struct i2c_client *client = data->client;
+ int error;
disable_irq(client->irq);
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(false);
- if (data->io_reg)
- regulator_disable(data->io_reg);
- if (data->core_reg)
- regulator_disable(data->core_reg);
+ error = regulator_disable(data->io_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+ error = regulator_disable(data->core_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
}
static int mms114_input_open(struct input_dev *dev)