pinctrl: sh-pfc: Align driver description title

Now, Renesas Pin Control drivers are under menu, but current
descriptions are not aligned.
This patch aligns them.

    - RZ/A2 gpio and pinctrl driver
    - RZ/N1 pinctrl driver
    - Emma Mobile EV2 pin control support
    - R-Mobile APE6 pin control support
    - R-Mobile A1 pin control support
    - RZ/G1H pin control support
    - RZ/G1M pin control support

    + pin control support for RZ/A2
    + pin control support for RZ/N1
    + pin control support for Emma Mobile EV2
    + pin control support for R-Mobile APE6
    + pin control support for R-Mobile A1
    + pin control support for RZ/G1H
    + pin control support for RZ/G1M

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imd8y4r2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

1 files changed, 44 insertions, 44 deletions

diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index ff10bb2ed497..86e4d062ef99 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -56,7 +56,7 @@ config PINCTRL_SH_PFC
 	  This enables pin control drivers for Renesas SuperH and ARM platforms
 
 config PINCTRL_RZA1
-	bool "RZ/A1 gpio and pinctrl driver"
+	bool "pin control support for RZ/A1"
 	depends on OF
 	depends on ARCH_R7S72100 || COMPILE_TEST
 	select GPIOLIB
@@ -67,7 +67,7 @@ config PINCTRL_RZA1
 	  This selects pinctrl driver for Renesas RZ/A1 platforms.
 
 config PINCTRL_RZA2
-	bool "RZ/A2 gpio and pinctrl driver"
+	bool "pin control support for RZ/A2"
 	depends on OF
 	depends on ARCH_R7S9210 || COMPILE_TEST
 	select GPIOLIB
@@ -78,7 +78,7 @@ config PINCTRL_RZA2
 	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
 
 config PINCTRL_RZN1
-	bool "RZ/N1 pinctrl driver"
+	bool "pin control support for RZ/N1"
 	depends on OF
 	depends on ARCH_RZN1 || COMPILE_TEST
 	select GENERIC_PINCTRL_GROUPS
@@ -100,142 +100,142 @@ config PINCTRL_SH_FUNC_GPIO
 	  This enables legacy function GPIOs for SH platforms
 
 config PINCTRL_PFC_EMEV2
-	bool "Emma Mobile EV2 pin control support" if COMPILE_TEST
+	bool "pin control support for Emma Mobile EV2" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A73A4
-	bool "R-Mobile APE6 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Mobile APE6" if COMPILE_TEST
 	select PINCTRL_SH_PFC_GPIO
 
 config PINCTRL_PFC_R8A7740
-	bool "R-Mobile A1 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Mobile A1" if COMPILE_TEST
 	select PINCTRL_SH_PFC_GPIO
 
 config PINCTRL_PFC_R8A7742
-	bool "RZ/G1H pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G1H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7743
-	bool "RZ/G1M pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G1M" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7744
-	bool "RZ/G1N pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G1N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7745
-	bool "RZ/G1E pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G1E" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77470
-	bool "RZ/G1C pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G1C" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A774A1
-	bool "RZ/G2M pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G2M" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A774B1
-	bool "RZ/G2N pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G2N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A774C0
-	bool "RZ/G2E pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G2E" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A774E1
-	bool "RZ/G2H pin control support" if COMPILE_TEST
+	bool "pin control support for RZ/G2H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7778
-	bool "R-Car M1A pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M1A" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7779
-	bool "R-Car H1 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car H1" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7790
-	bool "R-Car H2 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car H2" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7791
-	bool "R-Car M2-W pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M2-W" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7792
-	bool "R-Car V2H pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car V2H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7793
-	bool "R-Car M2-N pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M2-N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7794
-	bool "R-Car E2 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car E2" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77950
-	bool "R-Car H3 ES1.x pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77951
-	bool "R-Car H3 ES2.0+ pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77960
-	bool "R-Car M3-W pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M3-W" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77961
-	bool "R-Car M3-W+ pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M3-W+" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77965
-	bool "R-Car M3-N pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car M3-N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77970
-	bool "R-Car V3M pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car V3M" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77980
-	bool "R-Car V3H pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car V3H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77990
-	bool "R-Car E3 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car E3" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77995
-	bool "R-Car D3 pin control support" if COMPILE_TEST
+	bool "pin control support for R-Car D3" if COMPILE_TEST
 
 config PINCTRL_PFC_SH7203
-	bool "SH7203 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7203" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7264
-	bool "SH7264 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7264" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7269
-	bool "SH7269 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7269" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH73A0
-	bool "SH-Mobile AG5 pin control support" if COMPILE_TEST
+	bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
 	select PINCTRL_SH_PFC_GPIO
 	select REGULATOR
 
 config PINCTRL_PFC_SH7720
-	bool "SH7720 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7720" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7722
-	bool "SH7722 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7722" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7723
-	bool "SH-Mobile R2 pin control support" if COMPILE_TEST
+	bool "pin control support for SH-Mobile R2" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7724
-	bool "SH-Mobile R2R pin control support" if COMPILE_TEST
+	bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7734
-	bool "SH7734 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7734" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7757
-	bool "SH7757 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7757" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7785
-	bool "SH7785 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7785" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SH7786
-	bool "SH7786 pin control support" if COMPILE_TEST
+	bool "pin control support for SH7786" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 config PINCTRL_PFC_SHX3
-	bool "SH-X3 pin control support" if COMPILE_TEST
+	bool "pin control support for SH-X3" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
 endmenu