x86, GART: Disable GART table walk probes

Current code tramples over bit F3x90[6] which can be used to
disable GART table walk probes. However, this bit should be set
for performance reasons (speed up GART table walks). We are
allowed to do that since we put GART tables in UC memory later
anyway. Make it so.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1283531981-7495-3-git-send-email-bp@amd64.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

4 files changed, 24 insertions, 8 deletions

diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index fba0a72c4cc5..bf357f9b25f0 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -17,6 +17,7 @@ extern int fix_aperture;
 #define GARTEN		(1<<0)
 #define DISGARTCPU	(1<<4)
 #define DISGARTIO	(1<<5)
+#define DISTLBWALKPRB	(1<<6)
 
 /* GART cache control register bits. */
 #define INVGART		(1<<0)
@@ -56,6 +57,19 @@ static inline void gart_iommu_hole_init(void)
 
 extern int agp_amd64_init(void);
 
+static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order)
+{
+	u32 ctl;
+
+	/*
+	 * Don't enable translation but enable GART IO and CPU accesses.
+	 * Also, set DISTLBWALKPRB since GART tables memory is UC.
+	 */
+	ctl = DISTLBWALKPRB | order << 1;
+
+	pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+}
+
 static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
 {
 	u32 tmp, ctl;
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 6fabd406aa7f..c9cb17368448 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -505,8 +505,13 @@ out:
 
 	/* Fix up the north bridges */
 	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
-		int bus;
-		int dev_base, dev_limit;
+		int bus, dev_base, dev_limit;
+
+		/*
+		 * Don't enable translation yet but enable GART IO and CPU
+		 * accesses and set DISTLBWALKPRB since GART table memory is UC.
+		 */
+		u32 ctl = DISTLBWALKPRB | aper_order << 1;
 
 		bus = bus_dev_ranges[i].bus;
 		dev_base = bus_dev_ranges[i].dev_base;
@@ -515,10 +520,7 @@ out:
 			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
 				continue;
 
-			/* Don't enable translation yet. That is done later.
-			   Assume this BIOS didn't initialise the GART so
-			   just overwrite all previous bits */
-			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
 			write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
 		}
 	}
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 0f7f130caa67..6015ee13e22b 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -601,7 +601,7 @@ static void gart_fixup_northbridges(struct sys_device *dev)
 		 * Don't enable translations just yet.  That is the next
 		 * step.  Restore the pre-suspend aperture settings.
 		 */
-		pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, aperture_order << 1);
+		gart_set_size_and_enable(dev, aperture_order);
 		pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, aperture_alloc >> 25);
 	}
 }
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index bfe372b3d9db..564808a5c3c0 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -313,7 +313,7 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
 		return -1;
 
-	pci_write_config_dword(nb, AMD64_GARTAPERTURECTL, order << 1);
+	gart_set_size_and_enable(nb, order);
 	pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25);
 
 	return 0;