Merge remote-tracking branch 'regulator/topic/88pm800' into regulator-next

9 files changed, 732 insertions, 275 deletions

diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644
index 000000000000..e8a54c2a5821
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+  buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+  ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+	pmic: 88pm800@31 {
+		compatible = "marvell,88pm800";
+		reg = <0x31>;
+
+		regulators {
+			buck1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <3950000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			ldo1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <15000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+...
+		};
+	};
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
new file mode 100644
index 000000000000..b30f5ce659d1
--- /dev/null
+++ b/drivers/regulator/88pm800.c
@@ -0,0 +1,383 @@
+/*
+ * Regulators driver for Marvell 88PM800
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Joseph(Yossi) Hanin <yhanin@marvell.com>
+ * Yi Zhang <yizhang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
+
+/* LDO1 with DVC[0..3] */
+#define PM800_LDO1_VOUT		(0x08) /* VOUT1 */
+#define PM800_LDO1_VOUT_2	(0x09)
+#define PM800_LDO1_VOUT_3	(0x0A)
+#define PM800_LDO2_VOUT		(0x0B)
+#define PM800_LDO3_VOUT		(0x0C)
+#define PM800_LDO4_VOUT		(0x0D)
+#define PM800_LDO5_VOUT		(0x0E)
+#define PM800_LDO6_VOUT		(0x0F)
+#define PM800_LDO7_VOUT		(0x10)
+#define PM800_LDO8_VOUT		(0x11)
+#define PM800_LDO9_VOUT		(0x12)
+#define PM800_LDO10_VOUT	(0x13)
+#define PM800_LDO11_VOUT	(0x14)
+#define PM800_LDO12_VOUT	(0x15)
+#define PM800_LDO13_VOUT	(0x16)
+#define PM800_LDO14_VOUT	(0x17)
+#define PM800_LDO15_VOUT	(0x18)
+#define PM800_LDO16_VOUT	(0x19)
+#define PM800_LDO17_VOUT	(0x1A)
+#define PM800_LDO18_VOUT	(0x1B)
+#define PM800_LDO19_VOUT	(0x1C)
+
+/* BUCK1 with DVC[0..3] */
+#define PM800_BUCK1		(0x3C)
+#define PM800_BUCK1_1		(0x3D)
+#define PM800_BUCK1_2		(0x3E)
+#define PM800_BUCK1_3		(0x3F)
+#define PM800_BUCK2		(0x40)
+#define PM800_BUCK3		(0x41)
+#define PM800_BUCK3		(0x41)
+#define PM800_BUCK4		(0x42)
+#define PM800_BUCK4_1		(0x43)
+#define PM800_BUCK4_2		(0x44)
+#define PM800_BUCK4_3		(0x45)
+#define PM800_BUCK5		(0x46)
+
+#define PM800_BUCK_ENA		(0x50)
+#define PM800_LDO_ENA1_1	(0x51)
+#define PM800_LDO_ENA1_2	(0x52)
+#define PM800_LDO_ENA1_3	(0x53)
+
+#define PM800_LDO_ENA2_1	(0x56)
+#define PM800_LDO_ENA2_2	(0x57)
+#define PM800_LDO_ENA2_3	(0x58)
+
+#define PM800_BUCK1_MISC1	(0x78)
+#define PM800_BUCK3_MISC1	(0x7E)
+#define PM800_BUCK4_MISC1	(0x81)
+#define PM800_BUCK5_MISC1	(0x84)
+
+struct pm800_regulator_info {
+	struct regulator_desc desc;
+	int max_ua;
+};
+
+struct pm800_regulators {
+	struct regulator_dev *regulators[PM800_ID_RG_MAX];
+	struct pm80x_chip *chip;
+	struct regmap *map;
+};
+
+/*
+ * vreg - the buck regs string.
+ * ereg - the string for the enable register.
+ * ebit - the bit number in the enable register.
+ * amax - the current
+ * Buck has 2 kinds of voltage steps. It is easy to find voltage by ranges,
+ * not the constant voltage table.
+ * n_volt - Number of available selectors
+ */
+#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt)		\
+{									\
+	.desc	= {							\
+		.name	= #vreg,					\
+		.ops	= &pm800_volt_range_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= PM800_ID_##vreg,				\
+		.owner	= THIS_MODULE,					\
+		.n_voltages		= n_volt,			\
+		.linear_ranges		= volt_ranges,			\
+		.n_linear_ranges	= ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg		= PM800_##vreg,			\
+		.vsel_mask		= 0x7f,				\
+		.enable_reg		= PM800_##ereg,			\
+		.enable_mask		= 1 << (ebit),			\
+	},								\
+	.max_ua		= (amax),					\
+}
+
+/*
+ * vreg - the LDO regs string
+ * ereg -  the string for the enable register.
+ * ebit - the bit number in the enable register.
+ * amax - the current
+ * volt_table - the LDO voltage table
+ * For all the LDOes, there are too many ranges. Using volt_table will be
+ * simpler and faster.
+ */
+#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table)		\
+{									\
+	.desc	= {							\
+		.name	= #vreg,					\
+		.ops	= &pm800_volt_table_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= PM800_ID_##vreg,				\
+		.owner	= THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.vsel_reg	= PM800_##vreg##_VOUT,			\
+		.vsel_mask	= 0x1f,					\
+		.enable_reg	= PM800_##ereg,				\
+		.enable_mask	= 1 << (ebit),				\
+		.volt_table	= ldo_volt_table,			\
+	},								\
+	.max_ua		= (amax),					\
+}
+
+/* Ranges are sorted in ascending order. */
+static const struct regulator_linear_range buck1_volt_range[] = {
+	{ .min_uV = 600000, .max_uV = 1587500, .min_sel = 0, .max_sel = 0x4f,
+	  .uV_step = 12500 },
+	{ .min_uV = 1600000, .max_uV = 1800000, .min_sel = 0x50,
+	  .max_sel = 0x54, .uV_step = 50000 },
+};
+
+/* BUCK 2~5 have same ranges. */
+static const struct regulator_linear_range buck2_5_volt_range[] = {
+	{ .min_uV = 600000, .max_uV = 1587500,	.min_sel = 0, .max_sel = 0x4f,
+	  .uV_step = 12500 },
+	{ .min_uV = 1600000, .max_uV = 3300000, .min_sel = 0x50,
+	  .max_sel = 0x72, .uV_step = 50000 },
+};
+
+static const unsigned int ldo1_volt_table[] = {
+	600000,  650000,  700000,  750000,  800000,  850000,  900000,  950000,
+	1000000, 1050000, 1100000, 1150000, 1200000, 1300000, 1400000, 1500000,
+};
+
+static const unsigned int ldo2_volt_table[] = {
+	1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
+};
+
+/* LDO 3~17 have same voltage table. */
+static const unsigned int ldo3_17_volt_table[] = {
+	1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
+	2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
+};
+
+/* LDO 18~19 have same voltage table. */
+static const unsigned int ldo18_19_volt_table[] = {
+	1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
+};
+
+static int pm800_get_current_limit(struct regulator_dev *rdev)
+{
+	struct pm800_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return info->max_ua;
+}
+
+static struct regulator_ops pm800_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_current_limit = pm800_get_current_limit,
+};
+
+static struct regulator_ops pm800_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_current_limit = pm800_get_current_limit,
+};
+
+/* The array is indexed by id(PM800_ID_XXX) */
+static struct pm800_regulator_info pm800_regulator_info[] = {
+	PM800_BUCK(BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
+	PM800_BUCK(BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
+	PM800_BUCK(BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
+
+	PM800_LDO(LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
+	PM800_LDO(LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
+	PM800_LDO(LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
+	PM800_LDO(LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
+	PM800_LDO(LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
+};
+
+#define PM800_REGULATOR_OF_MATCH(_name, _id)				\
+	[PM800_ID_##_id] = {						\
+		.name = #_name,						\
+		.driver_data = &pm800_regulator_info[PM800_ID_##_id],	\
+	}
+
+static struct of_regulator_match pm800_regulator_matches[] = {
+	PM800_REGULATOR_OF_MATCH(buck1, BUCK1),
+	PM800_REGULATOR_OF_MATCH(buck2, BUCK2),
+	PM800_REGULATOR_OF_MATCH(buck3, BUCK3),
+	PM800_REGULATOR_OF_MATCH(buck4, BUCK4),
+	PM800_REGULATOR_OF_MATCH(buck5, BUCK5),
+	PM800_REGULATOR_OF_MATCH(ldo1, LDO1),
+	PM800_REGULATOR_OF_MATCH(ldo2, LDO2),
+	PM800_REGULATOR_OF_MATCH(ldo3, LDO3),
+	PM800_REGULATOR_OF_MATCH(ldo4, LDO4),
+	PM800_REGULATOR_OF_MATCH(ldo5, LDO5),
+	PM800_REGULATOR_OF_MATCH(ldo6, LDO6),
+	PM800_REGULATOR_OF_MATCH(ldo7, LDO7),
+	PM800_REGULATOR_OF_MATCH(ldo8, LDO8),
+	PM800_REGULATOR_OF_MATCH(ldo9, LDO9),
+	PM800_REGULATOR_OF_MATCH(ldo10, LDO10),
+	PM800_REGULATOR_OF_MATCH(ldo11, LDO11),
+	PM800_REGULATOR_OF_MATCH(ldo12, LDO12),
+	PM800_REGULATOR_OF_MATCH(ldo13, LDO13),
+	PM800_REGULATOR_OF_MATCH(ldo14, LDO14),
+	PM800_REGULATOR_OF_MATCH(ldo15, LDO15),
+	PM800_REGULATOR_OF_MATCH(ldo16, LDO16),
+	PM800_REGULATOR_OF_MATCH(ldo17, LDO17),
+	PM800_REGULATOR_OF_MATCH(ldo18, LDO18),
+	PM800_REGULATOR_OF_MATCH(ldo19, LDO19),
+};
+
+static int pm800_regulator_dt_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	ret = of_regulator_match(&pdev->dev, np,
+				 pm800_regulator_matches,
+				 ARRAY_SIZE(pm800_regulator_matches));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int pm800_regulator_probe(struct platform_device *pdev)
+{
+	struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm80x_platform_data *pdata = pdev->dev.parent->platform_data;
+	struct pm800_regulators *pm800_data;
+	struct pm800_regulator_info *info;
+	struct regulator_config config = { };
+	struct regulator_init_data *init_data;
+	int i, ret;
+
+	if (!pdata || pdata->num_regulators == 0) {
+		if (IS_ENABLED(CONFIG_OF)) {
+			ret = pm800_regulator_dt_init(pdev);
+			if (ret)
+				return ret;
+		} else {
+			return -ENODEV;
+		}
+	} else if (pdata->num_regulators) {
+		unsigned int count = 0;
+
+		/* Check whether num_regulator is valid. */
+		for (i = 0; i < ARRAY_SIZE(pdata->regulators); i++) {
+			if (pdata->regulators[i])
+				count++;
+		}
+		if (count != pdata->num_regulators)
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
+					GFP_KERNEL);
+	if (!pm800_data) {
+		dev_err(&pdev->dev, "Failed to allocate pm800_regualtors");
+		return -ENOMEM;
+	}
+
+	pm800_data->map = chip->subchip->regmap_power;
+	pm800_data->chip = chip;
+
+	platform_set_drvdata(pdev, pm800_data);
+
+	for (i = 0; i < PM800_ID_RG_MAX; i++) {
+		if (!pdata || pdata->num_regulators == 0)
+			init_data = pm800_regulator_matches[i].init_data;
+		else
+			init_data = pdata->regulators[i];
+		if (!init_data)
+			continue;
+		info = pm800_regulator_matches[i].driver_data;
+		config.dev = &pdev->dev;
+		config.init_data = init_data;
+		config.driver_data = info;
+		config.regmap = pm800_data->map;
+		config.of_node = pm800_regulator_matches[i].of_node;
+
+		pm800_data->regulators[i] =
+				regulator_register(&info->desc, &config);
+		if (IS_ERR(pm800_data->regulators[i])) {
+			ret = PTR_ERR(pm800_data->regulators[i]);
+			dev_err(&pdev->dev, "Failed to register %s\n",
+				info->desc.name);
+
+			while (--i >= 0)
+				regulator_unregister(pm800_data->regulators[i]);
+
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int pm800_regulator_remove(struct platform_device *pdev)
+{
+	struct pm800_regulators *pm800_data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < PM800_ID_RG_MAX; i++)
+		regulator_unregister(pm800_data->regulators[i]);
+
+	return 0;
+}
+
+static struct platform_driver pm800_regulator_driver = {
+	.driver		= {
+		.name	= "88pm80x-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pm800_regulator_probe,
+	.remove		= pm800_regulator_remove,
+};
+
+module_platform_driver(pm800_regulator_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joseph(Yossi) Hanin <yhanin@marvell.com>");
+MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM800 PMIC");
+MODULE_ALIAS("platform:88pm800-regulator");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f1e6ad98eeba..b05fa9009e82 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,15 +64,21 @@ config REGULATOR_USERSPACE_CONSUMER
 
 	  If unsure, say no.
 
-config REGULATOR_GPIO
-	tristate "GPIO regulator support"
-	depends on GPIOLIB
+config REGULATOR_88PM800
+	tristate "Marvell 88PM800 Power regulators"
+	depends on MFD_88PM800
 	help
-	  This driver provides support for regulators that can be
-	  controlled via gpios.
-	  It is capable of supporting current and voltage regulators
-	  and the platform has to provide a mapping of GPIO-states
-	  to target volts/amps.
+	  This driver supports Marvell 88PM800 voltage regulator chips.
+	  It delivers digitally programmable output,
+	  the voltage is programmed via I2C interface.
+	  It's suitable to support PXA988 chips to control VCC_MAIN and
+	  various voltages.
+
+config REGULATOR_88PM8607
+	bool "Marvell 88PM8607 Power regulators"
+	depends on MFD_88PM860X=y
+	help
+	  This driver supports 88PM8607 voltage regulator chips.
 
 config REGULATOR_AD5398
 	tristate "Analog Devices AD5398/AD5821 regulators"
@@ -81,6 +87,14 @@ config REGULATOR_AD5398
 	  This driver supports AD5398 and AD5821 current regulator chips.
 	  If building into module, its name is ad5398.ko.
 
+config REGULATOR_ANATOP
+	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+	depends on MFD_SYSCON
+	help
+	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
+	  regulators. It is recommended that this option be
+	  enabled on i.MX6 platform.
+
 config REGULATOR_AAT2870
 	tristate "AnalogicTech AAT2870 Regulators"
 	depends on MFD_AAT2870_CORE
@@ -88,6 +102,22 @@ config REGULATOR_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  regulator driver.
 
+config REGULATOR_AB3100
+	tristate "ST-Ericsson AB3100 Regulator functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	 These regulators correspond to functionality in the
+	 AB3100 analog baseband dealing with power regulators
+	 for the system.
+
+config REGULATOR_AB8500
+	bool "ST-Ericsson AB8500 Power Regulators"
+	depends on AB8500_CORE
+	help
+	  This driver supports the regulators found on the ST-Ericsson mixed
+	  signal AB8500 PMIC
+
 config REGULATOR_ARIZONA
 	tristate "Wolfson Arizona class devices"
 	depends on MFD_ARIZONA
@@ -96,6 +126,13 @@ config REGULATOR_ARIZONA
 	  Support for the regulators found on Wolfson Arizona class
 	  devices.
 
+config REGULATOR_AS3711
+	tristate "AS3711 PMIC"
+	depends on MFD_AS3711
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3711 PMIC
+
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
@@ -120,6 +157,17 @@ config REGULATOR_DA9055
 	  This driver can also be built as a module. If so, the module
 	  will be called da9055-regulator.
 
+config REGULATOR_DBX500_PRCMU
+	bool
+
+config REGULATOR_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+	depends on MFD_DB8500_PRCMU
+	select REGULATOR_DBX500_PRCMU
+	help
+	  This driver supports the voltage domain regulators controlled by the
+	  DB8500 PRCMU
+
 config REGULATOR_FAN53555
 	tristate "Fairchild FAN53555 Regulator"
 	depends on I2C
@@ -131,44 +179,57 @@ config REGULATOR_FAN53555
 	  input voltage supply of 2.5V to 5.5V. The output voltage is
 	  programmed through an I2C interface.
 
-config REGULATOR_ANATOP
-	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
-	depends on MFD_SYSCON
+config REGULATOR_GPIO
+	tristate "GPIO regulator support"
+	depends on GPIOLIB
 	help
-	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
-	  regulators. It is recommended that this option be
-	  enabled on i.MX6 platform.
+	  This driver provides support for regulators that can be
+	  controlled via gpios.
+	  It is capable of supporting current and voltage regulators
+	  and the platform has to provide a mapping of GPIO-states
+	  to target volts/amps.
 
-config REGULATOR_MC13XXX_CORE
-	tristate
+config REGULATOR_ISL6271A
+	tristate "Intersil ISL6271A Power regulator"
+	depends on I2C
+	help
+	  This driver supports ISL6271A voltage regulator chip.
 
-config REGULATOR_MC13783
-	tristate "Freescale MC13783 regulator driver"
-	depends on MFD_MC13783
-	select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3971
+	tristate "National Semiconductors LP3971 PMIC regulator driver"
+	depends on I2C
 	help
-	  Say y here to support the regulators found on the Freescale MC13783
-	  PMIC.
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3971 PMIC
 
-config REGULATOR_MC13892
-	tristate "Freescale MC13892 regulator driver"
-	depends on MFD_MC13XXX
-	select REGULATOR_MC13XXX_CORE
+config REGULATOR_LP3972
+	tristate "National Semiconductors LP3972 PMIC regulator driver"
+	depends on I2C
 	help
-	  Say y here to support the regulators found on the Freescale MC13892
-	  PMIC.
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3972 PMIC
 
-config REGULATOR_ISL6271A
-	tristate "Intersil ISL6271A Power regulator"
+config REGULATOR_LP872X
+	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
+	depends on I2C=y
+	select REGMAP_I2C
+	help
+	  This driver supports LP8720/LP8725 PMIC
+
+config REGULATOR_LP8755
+	tristate "TI LP8755 High Performance PMU driver"
 	depends on I2C
+	select REGMAP_I2C
 	help
-	  This driver supports ISL6271A voltage regulator chip.
+	  This driver supports LP8755 High Performance PMU driver. This
+	  chip contains six step-down DC/DC converters which can support
+	  9 mode multiphase configuration.
 
-config REGULATOR_88PM8607
-	bool "Marvell 88PM8607 Power regulators"
-	depends on MFD_88PM860X=y
+config REGULATOR_LP8788
+	bool "TI LP8788 Power Regulators"
+	depends on MFD_LP8788
 	help
-	  This driver supports 88PM8607 voltage regulator chips.
+	  This driver supports LP8788 voltage regulator chip.
 
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
@@ -259,48 +320,43 @@ config REGULATOR_MAX77693
 	  and one current regulator 'CHARGER'. This is suitable for
 	  Exynos-4x12 chips.
 
-config REGULATOR_PCAP
-	tristate "Motorola PCAP2 regulator driver"
-	depends on EZX_PCAP
-	help
-	 This driver provides support for the voltage regulators of the
-	 PCAP2 PMIC.
+config REGULATOR_MC13XXX_CORE
+	tristate
 
-config REGULATOR_LP3971
-	tristate "National Semiconductors LP3971 PMIC regulator driver"
-	depends on I2C
+config REGULATOR_MC13783
+	tristate "Freescale MC13783 regulator driver"
+	depends on MFD_MC13783
+	select REGULATOR_MC13XXX_CORE
 	help
-	 Say Y here to support the voltage regulators and convertors
-	 on National Semiconductors LP3971 PMIC
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
 
-config REGULATOR_LP3972
-	tristate "National Semiconductors LP3972 PMIC regulator driver"
-	depends on I2C
+config REGULATOR_MC13892
+	tristate "Freescale MC13892 regulator driver"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
 	help
-	 Say Y here to support the voltage regulators and convertors
-	 on National Semiconductors LP3972 PMIC
+	  Say y here to support the regulators found on the Freescale MC13892
+	  PMIC.
 
-config REGULATOR_LP872X
-	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
-	depends on I2C=y
-	select REGMAP_I2C
+config REGULATOR_PALMAS
+	tristate "TI Palmas PMIC Regulators"
+	depends on MFD_PALMAS
 	help
-	  This driver supports LP8720/LP8725 PMIC
+	  If you wish to control the regulators on the Palmas series of
+	  chips say Y here. This will enable support for all the software
+	  controllable SMPS/LDO regulators.
 
-config REGULATOR_LP8755
-	tristate "TI LP8755 High Performance PMU driver"
-	depends on I2C
-	select REGMAP_I2C
-	help
-	  This driver supports LP8755 High Performance PMU driver. This
-	  chip contains six step-down DC/DC converters which can support
-	  9 mode multiphase configuration.
+	  The regulators available on Palmas series chips vary depending
+	  on the muxing. This is handled automatically in the driver by
+	  reading the mux info from OTP.
 
-config REGULATOR_LP8788
-	bool "TI LP8788 Power Regulators"
-	depends on MFD_LP8788
+config REGULATOR_PCAP
+	tristate "Motorola PCAP2 regulator driver"
+	depends on EZX_PCAP
 	help
-	  This driver supports LP8788 voltage regulator chip.
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
 
 config REGULATOR_PCF50633
 	tristate "NXP PCF50633 regulator driver"
@@ -335,44 +391,15 @@ config REGULATOR_S5M8767
 	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 	 supports DVS mode with 8bits of output voltage control.
 
-config REGULATOR_AB3100
-	tristate "ST-Ericsson AB3100 Regulator functions"
-	depends on AB3100_CORE
-	default y if AB3100_CORE
-	help
-	 These regulators correspond to functionality in the
-	 AB3100 analog baseband dealing with power regulators
-	 for the system.
-
-config REGULATOR_AB8500
-	bool "ST-Ericsson AB8500 Power Regulators"
-	depends on AB8500_CORE
-	help
-	  This driver supports the regulators found on the ST-Ericsson mixed
-	  signal AB8500 PMIC
-
-config REGULATOR_DBX500_PRCMU
-	bool
-
-config REGULATOR_DB8500_PRCMU
-	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
-	depends on MFD_DB8500_PRCMU
-	select REGULATOR_DBX500_PRCMU
-	help
-	  This driver supports the voltage domain regulators controlled by the
-	  DB8500 PRCMU
-
-config REGULATOR_PALMAS
-	tristate "TI Palmas PMIC Regulators"
-	depends on MFD_PALMAS
+config REGULATOR_TI_ABB
+	bool "TI Adaptive Body Bias on-chip LDO"
+	depends on ARCH_OMAP
 	help
-	  If you wish to control the regulators on the Palmas series of
-	  chips say Y here. This will enable support for all the software
-	  controllable SMPS/LDO regulators.
-
-	  The regulators available on Palmas series chips vary depending
-	  on the muxing. This is handled automatically in the driver by
-	  reading the mux info from OTP.
+	  Select this option to support Texas Instruments' on-chip Adaptive Body
+	  Bias (ABB) LDO regulators. It is recommended that this option be
+	  enabled on required TI SoC. Certain Operating Performance Points
+	  on TI SoCs may be unstable without enabling this as it provides
+	  device specific optimized bias to allow/optimize functionality.
 
 config REGULATOR_TPS51632
 	tristate "TI TPS51632 Power Regulator"
@@ -481,16 +508,6 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
-config REGULATOR_TI_ABB
-	bool "TI Adaptive Body Bias on-chip LDO"
-	depends on ARCH_OMAP
-	help
-	  Select this option to support Texas Instruments' on-chip Adaptive Body
-	  Bias (ABB) LDO regulators. It is recommended that this option be
-	  enabled on required TI SoC. Certain Operating Performance Points
-	  on TI SoCs may be unstable without enabling this as it provides
-	  device specific optimized bias to allow/optimize functionality.
-
 config REGULATOR_VEXPRESS
 	tristate "Versatile Express regulators"
 	depends on VEXPRESS_CONFIG
@@ -526,12 +543,5 @@ config REGULATOR_WM8994
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
-config REGULATOR_AS3711
-	tristate "AS3711 PMIC"
-	depends on MFD_AS3711
-	help
-	  This driver provides support for the voltage regulators on the
-	  AS3711 PMIC
-
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ba4a3cf3afec..e292f26a1fbd 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
+obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
@@ -52,6 +53,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
+obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
@@ -64,7 +66,6 @@ obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
-obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 288c75abc190..42ae134797e0 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2079,6 +2079,43 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
 
 /**
+ * regulator_list_voltage_linear_range - List voltages for linear ranges
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a series of simple linear mappings between voltages
+ * and selectors can set linear_ranges in the regulator descriptor and
+ * then use this function as their list_voltage() operation,
+ */
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	const struct regulator_linear_range *range;
+	int i;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		range = &rdev->desc->linear_ranges[i];
+
+		if (!(selector >= range->min_sel &&
+		      selector <= range->max_sel))
+			continue;
+
+		selector -= range->min_sel;
+
+		return range->min_uV + (range->uV_step * selector);
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);
+
+/**
  * regulator_list_voltage_table - List voltages with table based mapping
  *
  * @rdev: Regulator device
@@ -2368,6 +2405,64 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
 
+/**
+ * regulator_map_voltage_linear - map_voltage() for multiple linear ranges
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing linear_ranges in their descriptor can use this as
+ * their map_voltage() callback.
+ */
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+				       int min_uV, int max_uV)
+{
+	const struct regulator_linear_range *range;
+	int ret = -EINVAL;
+	int voltage, i;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		range = &rdev->desc->linear_ranges[i];
+
+		if (!(min_uV <= range->max_uV && max_uV >= range->min_uV))
+			continue;
+
+		if (min_uV <= range->min_uV)
+			min_uV = range->min_uV;
+
+		/* range->uV_step == 0 means fixed voltage range */
+		if (range->uV_step == 0) {
+			ret = 0;
+		} else {
+			ret = DIV_ROUND_UP(min_uV - range->min_uV,
+					   range->uV_step);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret += range->min_sel;
+
+		break;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
+		return -EINVAL;
+
+	/* Map back into a voltage to verify we're still in bounds */
+	voltage = rdev->desc->ops->list_voltage(rdev, ret);
+	if (voltage < min_uV || voltage > max_uV)
+		return -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
+
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 9ff883f80878..76792c7d86f3 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -62,41 +62,12 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
  * General purpose LDOs
  */
 
-#define WM831X_GP_LDO_SELECTOR_LOW 0xe
-#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
-
-static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
-				      unsigned int selector)
-{
-	/* 0.9-1.6V in 50mV steps */
-	if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
-		return 900000 + (selector * 50000);
-	/* 1.7-3.3V in 100mV steps */
-	if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
-		return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
-				  * 100000);
-	return -EINVAL;
-}
-
-static int wm831x_gp_ldo_map_voltage(struct regulator_dev *rdev,
-				     int min_uV, int max_uV)
-{
-	int volt, vsel;
-
-	if (min_uV < 900000)
-		vsel = 0;
-	else if (min_uV < 1700000)
-		vsel = ((min_uV - 900000) / 50000);
-	else
-		vsel = ((min_uV - 1700000) / 100000)
-			+ WM831X_GP_LDO_SELECTOR_LOW + 1;
-
-	volt = wm831x_gp_ldo_list_voltage(rdev, vsel);
-	if (volt < min_uV || volt > max_uV)
-		return -EINVAL;
-
-	return vsel;
-}
+static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = {
+	{ .min_uV =  900000, .max_uV = 1650000, .min_sel =  0, .max_sel = 14,
+	  .uV_step =  50000 },
+	{ .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31,
+	  .uV_step = 100000 },
+};
 
 static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 					     int uV)
@@ -105,7 +76,7 @@ static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 	struct wm831x *wm831x = ldo->wm831x;
 	int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
 
-	sel = wm831x_gp_ldo_map_voltage(rdev, uV, uV);
+	sel = regulator_map_voltage_linear_range(rdev, uV, uV);
 	if (sel < 0)
 		return sel;
 
@@ -230,8 +201,8 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
 
 
 static struct regulator_ops wm831x_gp_ldo_ops = {
-	.list_voltage = wm831x_gp_ldo_list_voltage,
-	.map_voltage = wm831x_gp_ldo_map_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
@@ -290,7 +261,7 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
 
 	ldo->desc.id = id;
 	ldo->desc.type = REGULATOR_VOLTAGE;
-	ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+	ldo->desc.n_voltages = 32;
 	ldo->desc.ops = &wm831x_gp_ldo_ops;
 	ldo->desc.owner = THIS_MODULE;
 	ldo->desc.vsel_reg = ldo->base + WM831X_LDO_ON_CONTROL;
@@ -299,6 +270,8 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	ldo->desc.enable_mask = 1 << id;
 	ldo->desc.bypass_reg = ldo->base;
 	ldo->desc.bypass_mask = WM831X_LDO1_SWI;
+	ldo->desc.linear_ranges = wm831x_gp_ldo_ranges;
+	ldo->desc.n_linear_ranges = ARRAY_SIZE(wm831x_gp_ldo_ranges);
 
 	config.dev = pdev->dev.parent;
 	if (pdata)
@@ -358,43 +331,12 @@ static struct platform_driver wm831x_gp_ldo_driver = {
  * Analogue LDOs
  */
 
-
-#define WM831X_ALDO_SELECTOR_LOW 0xc
-#define WM831X_ALDO_MAX_SELECTOR 0x1f
-
-static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
-				      unsigned int selector)
-{
-	/* 1-1.6V in 50mV steps */
-	if (selector <= WM831X_ALDO_SELECTOR_LOW)
-		return 1000000 + (selector * 50000);
-	/* 1.7-3.5V in 100mV steps */
-	if (selector <= WM831X_ALDO_MAX_SELECTOR)
-		return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
-				  * 100000);
-	return -EINVAL;
-}
-
-static int wm831x_aldo_map_voltage(struct regulator_dev *rdev,
-				   int min_uV, int max_uV)
-{
-	int volt, vsel;
-
-	if (min_uV < 1000000)
-		vsel = 0;
-	else if (min_uV < 1700000)
-		vsel = ((min_uV - 1000000) / 50000);
-	else
-		vsel = ((min_uV - 1700000) / 100000)
-			+ WM831X_ALDO_SELECTOR_LOW + 1;
-
-	volt = wm831x_aldo_list_voltage(rdev, vsel);
-	if (volt < min_uV || volt > max_uV)
-		return -EINVAL;
-
-	return vsel;
-
-}
+static const struct regulator_linear_range wm831x_aldo_ranges[] = {
+	{ .min_uV = 1000000, .max_uV = 1650000, .min_sel =  0, .max_sel = 12,
+	  .uV_step =  50000 },
+	{ .min_uV = 1700000, .max_uV = 3500000, .min_sel = 13, .max_sel = 31,
+	  .uV_step = 100000 },
+};
 
 static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
 					     int uV)
@@ -403,7 +345,7 @@ static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
 	struct wm831x *wm831x = ldo->wm831x;
 	int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
 
-	sel = wm831x_aldo_map_voltage(rdev, uV, uV);
+	sel = regulator_map_voltage_linear_range(rdev, uV, uV);
 	if (sel < 0)
 		return sel;
 
@@ -486,8 +428,8 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops wm831x_aldo_ops = {
-	.list_voltage = wm831x_aldo_list_voltage,
-	.map_voltage = wm831x_aldo_map_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
@@ -545,7 +487,9 @@ static int wm831x_aldo_probe(struct platform_device *pdev)
 
 	ldo->desc.id = id;
 	ldo->desc.type = REGULATOR_VOLTAGE;
-	ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+	ldo->desc.n_voltages = 32;
+	ldo->desc.linear_ranges = wm831x_aldo_ranges;
+	ldo->desc.n_linear_ranges = ARRAY_SIZE(wm831x_aldo_ranges);
 	ldo->desc.ops = &wm831x_aldo_ops;
 	ldo->desc.owner = THIS_MODULE;
 	ldo->desc.vsel_reg = ldo->base + WM831X_LDO_ON_CONTROL;
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 7f0fa22ef2aa..5453dd0105ed 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -542,41 +542,12 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev,
 	return 0;
 }
 
-static int wm8350_ldo_list_voltage(struct regulator_dev *rdev,
-				    unsigned selector)
-{
-	if (selector > WM8350_LDO1_VSEL_MASK)
-		return -EINVAL;
-
-	if (selector < 16)
-		return (selector * 50000) + 900000;
-	else
-		return ((selector - 16) * 100000) + 1800000;
-}
-
-static int wm8350_ldo_map_voltage(struct regulator_dev *rdev, int min_uV,
-				  int max_uV)
-{
-	int volt, sel;
-	int min_mV = min_uV / 1000;
-	int max_mV = max_uV / 1000;
-
-	if (min_mV < 900 || min_mV > 3300)
-		return -EINVAL;
-	if (max_mV < 900 || max_mV > 3300)
-		return -EINVAL;
-
-	if (min_mV < 1800) /* step size is 50mV < 1800mV */
-		sel = DIV_ROUND_UP(min_uV - 900, 50);
-	else /* step size is 100mV > 1800mV */
-		sel = DIV_ROUND_UP(min_uV - 1800, 100) + 16;
-
-	volt = wm8350_ldo_list_voltage(rdev, sel);
-	if (volt < min_uV || volt > max_uV)
-		return -EINVAL;
-
-	return sel;
-}
+static const struct regulator_linear_range wm8350_ldo_ranges[] = {
+	{ .min_uV =  900000, .max_uV = 1750000, .min_sel =  0, .max_sel = 15,
+	  .uV_step =  50000 },
+	{ .min_uV = 1800000, .max_uV = 3300000, .min_sel = 16, .max_sel = 31,
+	  .uV_step = 100000 },
+};
 
 static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 {
@@ -603,7 +574,7 @@ static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 		return -EINVAL;
 	}
 
-	sel = wm8350_ldo_map_voltage(rdev, uV, uV);
+	sel = regulator_map_voltage_linear_range(rdev, uV, uV);
 	if (sel < 0)
 		return -EINVAL;
 
@@ -998,10 +969,10 @@ static struct regulator_ops wm8350_dcdc2_5_ops = {
 };
 
 static struct regulator_ops wm8350_ldo_ops = {
-	.map_voltage = wm8350_ldo_map_voltage,
+	.map_voltage = regulator_map_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.list_voltage = wm8350_ldo_list_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -1108,6 +1079,8 @@ static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
 		.irq = WM8350_IRQ_UV_LDO1,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = WM8350_LDO1_VSEL_MASK + 1,
+		.linear_ranges = wm8350_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
 		.vsel_reg = WM8350_LDO1_CONTROL,
 		.vsel_mask = WM8350_LDO1_VSEL_MASK,
 		.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1121,6 +1094,8 @@ static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
 		.irq = WM8350_IRQ_UV_LDO2,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = WM8350_LDO2_VSEL_MASK + 1,
+		.linear_ranges = wm8350_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
 		.vsel_reg = WM8350_LDO2_CONTROL,
 		.vsel_mask = WM8350_LDO2_VSEL_MASK,
 		.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1134,6 +1109,8 @@ static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
 		.irq = WM8350_IRQ_UV_LDO3,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = WM8350_LDO3_VSEL_MASK + 1,
+		.linear_ranges = wm8350_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
 		.vsel_reg = WM8350_LDO3_CONTROL,
 		.vsel_mask = WM8350_LDO3_VSEL_MASK,
 		.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1147,6 +1124,8 @@ static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
 		.irq = WM8350_IRQ_UV_LDO4,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = WM8350_LDO4_VSEL_MASK + 1,
+		.linear_ranges = wm8350_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
 		.vsel_reg = WM8350_LDO4_CONTROL,
 		.vsel_mask = WM8350_LDO4_VSEL_MASK,
 		.enable_reg = WM8350_DCDC_LDO_REQUESTED,
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index a09f03ee5506..2ac7e1aceb05 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -19,47 +19,21 @@
 #include <linux/regulator/driver.h>
 #include <linux/mfd/wm8400-private.h>
 
-static int wm8400_ldo_list_voltage(struct regulator_dev *dev,
-				   unsigned selector)
-{
-	if (selector > WM8400_LDO1_VSEL_MASK)
-		return -EINVAL;
-
-	if (selector < 15)
-		return 900000 + (selector * 50000);
-	else
-		return 1700000 + ((selector - 15) * 100000);
-}
-
-static int wm8400_ldo_map_voltage(struct regulator_dev *dev,
-				  int min_uV, int max_uV)
-{
-	u16 val;
-	int volt;
-
-	if (min_uV < 900000 || min_uV > 3300000)
-		return -EINVAL;
-
-	if (min_uV < 1700000) /* Steps of 50mV from 900mV;  */
-		val = DIV_ROUND_UP(min_uV - 900000, 50000);
-	else /* Steps of 100mV from 1700mV */
-		val = DIV_ROUND_UP(min_uV - 1700000, 100000) + 15;
-
-	volt = wm8400_ldo_list_voltage(dev, val);
-	if (volt < min_uV || volt > max_uV)
-		return -EINVAL;
-
-	return val;
-}
+static const struct regulator_linear_range wm8400_ldo_ranges[] = {
+	{ .min_uV =  900000, .max_uV = 1600000, .min_sel = 0, .max_sel = 14,
+	  .uV_step =  50000 },
+	{ .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31,
+	  .uV_step = 100000 },
+};
 
 static struct regulator_ops wm8400_ldo_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
-	.list_voltage = wm8400_ldo_list_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.map_voltage = wm8400_ldo_map_voltage,
+	.map_voltage = regulator_map_voltage_linear_range,
 };
 
 static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev)
@@ -155,6 +129,8 @@ static struct regulator_desc regulators[] = {
 		.enable_reg = WM8400_LDO1_CONTROL,
 		.enable_mask = WM8400_LDO1_ENA,
 		.n_voltages = WM8400_LDO1_VSEL_MASK + 1,
+		.linear_ranges = wm8400_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
 		.vsel_reg = WM8400_LDO1_CONTROL,
 		.vsel_mask = WM8400_LDO1_VSEL_MASK,
 		.type = REGULATOR_VOLTAGE,
@@ -167,6 +143,8 @@ static struct regulator_desc regulators[] = {
 		.enable_reg = WM8400_LDO2_CONTROL,
 		.enable_mask = WM8400_LDO2_ENA,
 		.n_voltages = WM8400_LDO2_VSEL_MASK + 1,
+		.linear_ranges = wm8400_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
 		.type = REGULATOR_VOLTAGE,
 		.vsel_reg = WM8400_LDO2_CONTROL,
 		.vsel_mask = WM8400_LDO2_VSEL_MASK,
@@ -179,6 +157,8 @@ static struct regulator_desc regulators[] = {
 		.enable_reg = WM8400_LDO3_CONTROL,
 		.enable_mask = WM8400_LDO3_ENA,
 		.n_voltages = WM8400_LDO3_VSEL_MASK + 1,
+		.linear_ranges = wm8400_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
 		.vsel_reg = WM8400_LDO3_CONTROL,
 		.vsel_mask = WM8400_LDO3_VSEL_MASK,
 		.type = REGULATOR_VOLTAGE,
@@ -191,6 +171,8 @@ static struct regulator_desc regulators[] = {
 		.enable_reg = WM8400_LDO4_CONTROL,
 		.enable_mask = WM8400_LDO4_ENA,
 		.n_voltages = WM8400_LDO4_VSEL_MASK + 1,
+		.linear_ranges = wm8400_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
 		.vsel_reg = WM8400_LDO4_CONTROL,
 		.vsel_mask = WM8400_LDO4_VSEL_MASK,
 		.type = REGULATOR_VOLTAGE,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 6700cc94bdd1..67e13aa5a478 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -40,6 +40,24 @@ enum regulator_status {
 };
 
 /**
+ * Specify a range of voltages for regulator_map_linar_range() and
+ * regulator_list_linear_range().
+ *
+ * @min_uV:  Lowest voltage in range
+ * @max_uV:  Highest voltage in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @uV_step: Step size
+ */
+struct regulator_linear_range {
+	unsigned int min_uV;
+	unsigned int max_uV;
+	unsigned int min_sel;
+	unsigned int max_sel;
+	unsigned int uV_step;
+};
+
+/**
  * struct regulator_ops - regulator operations.
  *
  * @enable: Configure the regulator as enabled.
@@ -223,6 +241,9 @@ struct regulator_desc {
 	unsigned int linear_min_sel;
 	unsigned int ramp_delay;
 
+	const struct regulator_linear_range *linear_ranges;
+	int n_linear_ranges;
+
 	const unsigned int *volt_table;
 
 	unsigned int vsel_reg;
@@ -326,10 +347,14 @@ int regulator_mode_to_status(unsigned int);
 
 int regulator_list_voltage_linear(struct regulator_dev *rdev,
 				  unsigned int selector);
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+					unsigned int selector);
 int regulator_list_voltage_table(struct regulator_dev *rdev,
 				  unsigned int selector);
 int regulator_map_voltage_linear(struct regulator_dev *rdev,
 				  int min_uV, int max_uV);
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+				       int min_uV, int max_uV);
 int regulator_map_voltage_iterate(struct regulator_dev *rdev,
 				  int min_uV, int max_uV);
 int regulator_map_voltage_ascend(struct regulator_dev *rdev,