aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2015-12-15 23:21:05 -0500
committerDavid S. Miller <davem@davemloft.net>2015-12-15 23:21:05 -0500
commit3026043dc4035a6f6dff68065c9df245ead06344 (patch)
tree06938ff85f322c749126ae8cff44b02794197173
parentMerge branch 'end-of-ip-csum' (diff)
parentstmmac: socfpga: Provide dt node to config ptp clk source. (diff)
downloadlinux-dev-3026043dc4035a6f6dff68065c9df245ead06344.tar.xz
linux-dev-3026043dc4035a6f6dff68065c9df245ead06344.zip
Merge branch 'stmmac-mdio-compat'
Merge branch 'stmmac-mdio-compat' Phil Reid says: ==================== stmmac: create of compatible mdio bus for stmacc driver Provide ability to specify a fixed phy in the device tree and retain the mdio bus if no phy is found. This is needed where a dsa is connected via a fixed phy and uses the mdio bus for config. Fixed ptp ref clock calculatins for the stmmac when ptp ref clock is running at <= 50Mhz. Also add device tree setting to config ptp clk source on socfpga platforms. Changes from V5: - Restore behaviour of unregister mdio bus when no phys found if there is no device tree node create the bus. - Modify condition to allocate mdio_base_data conditional on fixed phy presece as well. Maintains existing behaviour in conditions where a fixed phy is not present. Changes from V4: - Restore #ifdef CONFIG_OF around setting of reset_gpio. Member doesn't exist when this isn't defined. Changes from V3: - Use if (IS_ENABLED(CONFIG_OF)) instead of #if. Reorder some code to reduce if statements. - of_mdiobus_register already falls back to mdiobus_register - Tested on system with CONFIG_OF Changes from V2: - Formatting, spaces & lines > 80 chars. Using checkpatch - Drop PTP register debugfs patch. Changes from V1: - Fixed mismatch doc / code for ptp_ref_clk dt node. - Remove unit address from doc example. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--Documentation/devicetree/bindings/net/socfpga-dwmac.txt2
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt25
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c9
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c9
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c19
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c26
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c2
8 files changed, 66 insertions, 28 deletions
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 3a9d67951606..72d82d684342 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -11,6 +11,8 @@ Required properties:
designware version numbers documented in stmmac.txt
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, the register offset, and the register shift.
+ - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
+ for ptp ref clk. This affects all emacs as the clock is common.
Optional properties:
altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index f34fc3c81a75..e862a922bd3f 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -35,18 +35,18 @@ Optional properties:
- reset-names: Should contain the reset signal name "stmmaceth", if a
reset phandle is given
- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock and
- the second clock should be peripheral's register interface clock. Further
- clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
-- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
- available this clock is used for programming the Timestamp Addend Register.
- If not passed then the system clock will be used and this is fine on some
- platforms.
+- clocks: If present, the first clock should be the GMAC main clock
+ The optional second clock should be peripheral's register interface clock.
+ The third optional clock should be the ptp reference clock.
+ Further clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property.
+ The first one should be "stmmaceth".
+ The optional second one should be "pclk".
+ The optional third one should be "clk_ptp_ref".
- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
- tx-fifo-depth: See ethernet.txt file in the same directory
- rx-fifo-depth: See ethernet.txt file in the same directory
+- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
Examples:
@@ -65,4 +65,11 @@ Examples:
tx-fifo-depth = <16384>;
clocks = <&clock>;
clock-names = "stmmaceth";
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@0 {
+ };
+ };
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index f4518bc2cd28..1e19c8fd8b82 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -439,7 +439,7 @@ struct stmmac_ops {
/* PTP and HW Timer helpers */
struct stmmac_hwtimestamp {
void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data);
- void (*config_sub_second_increment) (void __iomem *ioaddr);
+ u32 (*config_sub_second_increment) (void __iomem *ioaddr, u32 clk_rate);
int (*init_systime) (void __iomem *ioaddr, u32 sec, u32 nsec);
int (*config_addend) (void __iomem *ioaddr, u32 addend);
int (*adjust_systime) (void __iomem *ioaddr, u32 sec, u32 nsec,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 401383b252a8..f0d797ab74d8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -32,6 +32,7 @@
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
+#define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010
#define EMAC_SPLITTER_CTRL_REG 0x0
#define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3
@@ -47,6 +48,7 @@ struct socfpga_dwmac {
struct regmap *sys_mgr_base_addr;
struct reset_control *stmmac_rst;
void __iomem *splitter_base;
+ bool f2h_ptp_ref_clk;
};
static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
@@ -116,6 +118,8 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
return -EINVAL;
}
+ dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk");
+
np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0);
if (np_splitter) {
if (of_address_to_resource(np_splitter, 0, &res_splitter)) {
@@ -171,6 +175,11 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
ctrl |= val << reg_shift;
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
return 0;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 76ad214b4036..a77f68918010 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -33,22 +33,25 @@ static void stmmac_config_hw_tstamping(void __iomem *ioaddr, u32 data)
writel(data, ioaddr + PTP_TCR);
}
-static void stmmac_config_sub_second_increment(void __iomem *ioaddr)
+static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr,
+ u32 ptp_clock)
{
u32 value = readl(ioaddr + PTP_TCR);
unsigned long data;
/* Convert the ptp_clock to nano second
- * formula = (1/ptp_clock) * 1000000000
+ * formula = (2/ptp_clock) * 1000000000
* where, ptp_clock = 50MHz.
*/
- data = (1000000000ULL / 50000000);
+ data = (2000000000ULL / ptp_clock);
/* 0.465ns accuracy */
if (!(value & PTP_TCR_TSCTRLSSR))
data = (data * 1000) / 465;
writel(data, ioaddr + PTP_SSIR);
+
+ return data;
}
static int stmmac_init_systime(void __iomem *ioaddr, u32 sec, u32 nsec)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0b0fea73a7a7..6d4c33a7f0b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -53,6 +53,7 @@
#include "stmmac.h"
#include <linux/reset.h>
#include <linux/of_mdio.h>
+#include "dwmac1000.h"
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -185,7 +186,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
priv->clk_csr = STMMAC_CSR_100_150M;
else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
priv->clk_csr = STMMAC_CSR_150_250M;
- else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
+ else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
priv->clk_csr = STMMAC_CSR_250_300M;
}
}
@@ -435,6 +436,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
u32 ts_master_en = 0;
u32 ts_event_en = 0;
u32 value = 0;
+ u32 sec_inc;
if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
netdev_alert(priv->dev, "No support for HW time stamping\n");
@@ -598,24 +600,19 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
tstamp_all | ptp_v2 | ptp_over_ethernet |
ptp_over_ipv6_udp | ptp_over_ipv4_udp | ts_event_en |
ts_master_en | snap_type_sel);
-
priv->hw->ptp->config_hw_tstamping(priv->ioaddr, value);
/* program Sub Second Increment reg */
- priv->hw->ptp->config_sub_second_increment(priv->ioaddr);
+ sec_inc = priv->hw->ptp->config_sub_second_increment(
+ priv->ioaddr, priv->clk_ptp_rate);
+ temp = div_u64(1000000000ULL, sec_inc);
/* calculate default added value:
* formula is :
* addend = (2^32)/freq_div_ratio;
- * where, freq_div_ratio = clk_ptp_ref_i/50MHz
- * hence, addend = ((2^32) * 50MHz)/clk_ptp_ref_i;
- * NOTE: clk_ptp_ref_i should be >= 50MHz to
- * achieve 20ns accuracy.
- *
- * 2^x * y == (y << x), hence
- * 2^32 * 50000000 ==> (50000000 << 32)
+ * where, freq_div_ratio = 1e9ns/sec_inc
*/
- temp = (u64) (50000000ULL << 32);
+ temp = (u64)(temp << 32);
priv->default_addend = div_u64(temp, priv->clk_ptp_rate);
priv->hw->ptp->config_addend(priv->ioaddr,
priv->default_addend);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index bba670c42e37..16c85ccd1762 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -29,7 +29,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
-
+#include <linux/of_mdio.h>
#include <asm/io.h>
#include "stmmac.h"
@@ -200,10 +200,29 @@ int stmmac_mdio_register(struct net_device *ndev)
struct stmmac_priv *priv = netdev_priv(ndev);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
int addr, found;
+ struct device_node *mdio_node = NULL;
+ struct device_node *child_node = NULL;
if (!mdio_bus_data)
return 0;
+ if (IS_ENABLED(CONFIG_OF)) {
+ for_each_child_of_node(priv->device->of_node, child_node) {
+ if (of_device_is_compatible(child_node,
+ "snps,dwmac-mdio")) {
+ mdio_node = child_node;
+ break;
+ }
+ }
+
+ if (mdio_node) {
+ netdev_dbg(ndev, "FOUND MDIO subnode\n");
+ } else {
+ netdev_err(ndev, "NO MDIO subnode\n");
+ return 0;
+ }
+ }
+
new_bus = mdiobus_alloc();
if (new_bus == NULL)
return -ENOMEM;
@@ -231,7 +250,8 @@ int stmmac_mdio_register(struct net_device *ndev)
new_bus->irq = irqlist;
new_bus->phy_mask = mdio_bus_data->phy_mask;
new_bus->parent = priv->device;
- err = mdiobus_register(new_bus);
+
+ err = of_mdiobus_register(new_bus, mdio_node);
if (err != 0) {
pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
goto bus_register_fail;
@@ -284,7 +304,7 @@ int stmmac_mdio_register(struct net_device *ndev)
}
}
- if (!found) {
+ if (!found && !mdio_node) {
pr_warn("%s: No PHY found\n", ndev->name);
mdiobus_unregister(new_bus);
mdiobus_free(new_bus);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index d02691ba3d7f..6a52fa18cbf2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -146,7 +146,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if (plat->phy_node || plat->phy_bus_name)
+ if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =