Merge tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few driver specific fixes here, the DMA burst size increase in the
  spfi driver is a fix to make the hardware happier in some situations"

* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: img-spfi: Increase DMA burst size
  spi: img-spfi: Enable controller before starting TX DMA
  spi: sh-msiof: Add runtime PM lock in initializing

2 files changed, 9 insertions, 4 deletions

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index b410499cddca..aad6683db81b 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -341,7 +341,7 @@ static int img_spfi_start_dma(struct spi_master *master,
 		default:
 			rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA;
 			rxconf.src_addr_width = 1;
-			rxconf.src_maxburst = 1;
+			rxconf.src_maxburst = 4;
 		}
 		dmaengine_slave_config(spfi->rx_ch, &rxconf);
 
@@ -368,7 +368,7 @@ static int img_spfi_start_dma(struct spi_master *master,
 		default:
 			txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA;
 			txconf.dst_addr_width = 1;
-			txconf.dst_maxburst = 1;
+			txconf.dst_maxburst = 4;
 			break;
 		}
 		dmaengine_slave_config(spfi->tx_ch, &txconf);
@@ -390,14 +390,14 @@ static int img_spfi_start_dma(struct spi_master *master,
 		dma_async_issue_pending(spfi->rx_ch);
 	}
 
+	spfi_start(spfi);
+
 	if (xfer->tx_buf) {
 		spfi->tx_dma_busy = true;
 		dmaengine_submit(txdesc);
 		dma_async_issue_pending(spfi->tx_ch);
 	}
 
-	spfi_start(spfi);
-
 	return 1;
 
 stop_dma:
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 239be7cbe5a8..96a5fc0878d8 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -480,6 +480,8 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 	struct device_node	*np = spi->master->dev.of_node;
 	struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
 
+	pm_runtime_get_sync(&p->pdev->dev);
+
 	if (!np) {
 		/*
 		 * Use spi->controller_data for CS (same strategy as spi_gpio),
@@ -498,6 +500,9 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 	if (spi->cs_gpio >= 0)
 		gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
 
+
+	pm_runtime_put_sync(&p->pdev->dev);
+
 	return 0;
 }