diff options
| author |   Konrad Dybcio <konrad.dybcio@somainline.org> | 2022-04-30 18:23:48 +0200 |
|---|---|---|
| committer |   Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-06-27 15:58:45 -0500 |
| commit | 392b73cb816094348abb7e3ff1288b5786b4ee16 (patch) | |
| tree | 3b5114ebe434d9b6f8a8b1e982a295c255ab4918 | |
| parent | arm64: dts: qcom: msm8998-fxtec: Use "okay" instead of "ok" (diff) | |
| download | linux-dev-392b73cb816094348abb7e3ff1288b5786b4ee16.tar.xz linux-dev-392b73cb816094348abb7e3ff1288b5786b4ee16.zip | |
arm64: dts: qcom: msm8998*: Keep MMCC & MMSS_SMMU enabled by default
MMCC is a component of the SoC that should always be configured. It was kept
off due to misconfiguration on clamshell machines. Keep it disabled on these
ones and enable it by default on all the others.
Exactly the same story applies to MMSS_SMMU, which directly depends on MMCC.
Do note, that if a platform doesn't use neither EFIFB (only applies to WoA
devices in this case) or simplefb (applies to precisely 2 msm8998 devices
as of this commit), this will not cause any harm.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430162353.607709-10-konrad.dybcio@somainline.org
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 14 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 8 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 |
4 files changed, 14 insertions, 18 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index a8756bcdad3b..7928b8197474 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -93,6 +93,20 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +/* + * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned + * up, because as far as Linux is concerned - they are unused. Disable it by default + * on clamshell devices, as it will break them, unless either simplefb is configured to + * hold a vote for these clocks, or panels are brought up properly, using drm/msm. + */ +&mmcc { + status = "disabled"; +}; + +&mmss_smmu { + status = "disabled"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 33f641ca6c94..56bcd4a1ddb1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -205,14 +205,6 @@ }; }; -&mmcc { - status = "okay"; -}; - -&mmss_smmu { - status = "okay"; -}; - &pm8998_gpio { vol_up_pin_a: vol-up-active { pins = "gpio6"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index fb48c275c53b..aa7932428333 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -276,14 +276,6 @@ regulator-soft-start; }; -&mmcc { - status = "ok"; -}; - -&mmss_smmu { - status = "ok"; -}; - &pm8005_regulators { /* VDD_GFX supply */ pm8005_s1: s1 { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 514c203cc473..7d9bf3a01242 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -2388,7 +2388,6 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xc8c0000 0x40000>; - status = "disabled"; clock-names = "xo", "gpll0", @@ -2423,7 +2422,6 @@ <&mmcc BIMC_SMMU_AXI_CLK>; clock-names = "iface-mm", "iface-smmu", "bus-mm", "bus-smmu"; - status = "disabled"; #global-interrupts = <0>; interrupts = |