Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)

   - Log E820 clipping better (Bjorn Helgaas)

   - Add kernel cmdline options to enable/disable E820 clipping (Hans de
     Goede)

   - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
     Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
     usable address space for touchpads, Thunderbolt devices, etc (Hans
     de Goede)

   - Disable E820 clipping by default starting in 2023 (Hans de Goede)

  PCI device hotplug:

   - Include files to remove implicit dependencies (Christophe Leroy)

   - Only put Root Ports in D3 if they can signal and wake from D3 so
     AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)

  Power management:

   - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
     it's unused otherwise (Krzysztof Kozlowski)

   - Power up devices completely, including anything platform firmware
     needs to do, during runtime resume (Rafael J. Wysocki)

   - Move pci_resume_bus() to PM callbacks so we observe the required
     bridge power-up delays (Rafael J. Wysocki)

   - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)

   - Split pci_raw_set_power_state() between pci_power_up() and a new
     pci_set_low_power_state() (Rafael J. Wysocki)

   - Set current_state to D3cold if config read returns ~0, indicating
     the device is not accessible (Rafael J. Wysocki)

   - Do not call pci_update_current_state() from pci_power_up() so BARs
     and ASPM config are restored correctly (Rafael J. Wysocki)

   - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)

   - Split pci_power_up() to pci_set_full_power_state() to avoid some
     redundant operations (Rafael J. Wysocki)

   - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)

   - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)

   - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
     Wysocki)

  Virtualization:

   - Acquire device lock before config space access lock to avoid AB/BA
     deadlock with sriov_numvfs_store() (Yicong Yang)

  Error handling:

   - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
     leave permanently set (Kuppuswamy Sathyanarayanan)

  Peer-to-peer DMA:

   - Whitelist Intel Skylake-E Root Ports regardless of which devfn they
     are (Shlomo Pongratz)

  ASPM:

   - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
     can be enabled (Mika Westerberg)

  Cadence PCIe controller driver:

   - Set up device-specific register to allow PTM Responder to be
     enabled by the normal architected bit (Christian Gmeiner)

   - Override advertised FLR support since the controller doesn't
     implement FLR correctly (Parshuram Thombare)

  Cadence PCIe endpoint driver:

   - Correct bitmap size for the ob_region_map of outbound window usage
     (Dan Carpenter)

  Freescale i.MX6 PCIe controller driver:

   - Fix PERST# assertion/deassertion so we observe the required delays
     before accessing device (Francesco Dolcini)

  Freescale Layerscape PCIe controller driver:

   - Add "big-endian" DT property (Hou Zhiqiang)

   - Update SCFG DT property (Hou Zhiqiang)

   - Add "aer", "pme", "intr" DT properties (Li Yang)

   - Add DT compatible strings for ls1028a (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
     remapping errors when MSI-X remapping is disabled (Nirmal Patel)

   - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
     remapping was enabled (Nirmal Patel)

  Marvell MVEBU PCIe controller driver:

   - Add of_pci_get_slot_power_limit() to parse the
     'slot-power-limit-milliwatt' DT property (Pali Rohár)

   - Add mvebu support for sending Set_Slot_Power_Limit message (Pali
     Rohár)

  MediaTek PCIe controller driver:

   - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)

  MediaTek PCIe Gen3 controller driver:

   - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)

  Microchip PolarFlare PCIe controller driver:

   - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
     and mc_handle_intx() to avoid lost interrupts (Conor Dooley)

   - Fix interrupt handling race (Daire McNamara)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop tegra194 MSI register save/restore, which is unnecessary since
     the DWC core does it (Jisheng Zhang)

  Qualcomm PCIe controller driver:

   - Add SM8150 SoC DT binding and support (Bhupesh Sharma)

   - Fix pipe clock imbalance (Johan Hovold)

   - Fix runtime PM imbalance on probe errors (Johan Hovold)

   - Fix PHY init imbalance on probe errors (Johan Hovold)

   - Convert DT binding to YAML (Dmitry Baryshkov)

   - Update DT binding to show that resets aren't required for
     MSM8996/APQ8096 platforms (Dmitry Baryshkov)

   - Add explicit register names per chipset in DT binding (Dmitry
     Baryshkov)

   - Add sc7280-specific clock and reset definitions to DT binding
     (Dmitry Baryshkov)

  Rockchip PCIe controller driver:

   - Fix bitmap size when searching for free outbound region (Dan
     Carpenter)

  Rockchip DesignWare PCIe controller driver:

   - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
     because it's not fully compatible with rockchip (Peter Geis)

   - Reset rockchip-dwc controller at probe (Peter Geis)

   - Add rockchip-dwc INTx support (Peter Geis)

  Synopsys DesignWare PCIe controller driver:

   - Return error instead of success if DMA mapping of MSI area fails
     (Jiantao Zhang)

  Miscellaneous:

   - Change pci_set_dma_mask() documentation references to
     dma_set_mask() (Alex Williamson)"

* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
  dt-bindings: PCI: qcom: Add schema for sc7280 chipset
  dt-bindings: PCI: qcom: Specify reg-names explicitly
  dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
  dt-bindings: PCI: qcom: Convert to YAML
  PCI: qcom: Fix unbalanced PHY init on probe errors
  PCI: qcom: Fix runtime PM imbalance on probe errors
  PCI: qcom: Fix pipe clock imbalance
  PCI: qcom: Add SM8150 SoC support
  dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
  x86/PCI: Disable E820 reserved region clipping starting in 2023
  x86/PCI: Disable E820 reserved region clipping via quirks
  x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
  PCI: microchip: Fix potential race in interrupt handling
  PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
  PCI: cadence: Clear FLR in device capabilities register
  PCI: cadence: Allow PTM Responder to be enabled
  PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
  PCI: vmd: Assign VMD IRQ domain before enumeration
  PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
  PCI: rockchip-dwc: Add legacy interrupt support
  ...

43 files changed, 1646 insertions, 748 deletions

diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index 67a850b55617..cced568d78e9 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -273,12 +273,12 @@ Set the DMA mask size
 While all drivers should explicitly indicate the DMA capability
 (e.g. 32 or 64 bit) of the PCI bus master, devices with more than
 32-bit bus master capability for streaming data need the driver
-to "register" this capability by calling pci_set_dma_mask() with
+to "register" this capability by calling dma_set_mask() with
 appropriate parameters.  In general this allows more efficient DMA
 on systems where System RAM exists above 4G _physical_ address.
 
 Drivers for all PCI-X and PCIe compliant devices must call
-set_dma_mask() as they are 64-bit DMA devices.
+dma_set_mask() as they are 64-bit DMA devices.
 
 Similarly, drivers must also "register" this capability if the device
 can directly address "coherent memory" in System RAM above 4G physical
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 32073f873662..710b52d87bdd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4099,6 +4099,15 @@
 				please report a bug.
 		nocrs		[X86] Ignore PCI host bridge windows from ACPI.
 				If you need to use this, please report a bug.
+		use_e820	[X86] Use E820 reservations to exclude parts of
+				PCI host bridge windows. This is a workaround
+				for BIOS defects in host bridge _CRS methods.
+				If you need to use this, please report a bug to
+				<linux-pci@vger.kernel.org>.
+		no_e820		[X86] Ignore E820 reservations for PCI host
+				bridge windows. This is the default on modern
+				hardware. If you need to use this, please report
+				a bug to <linux-pci@vger.kernel.org>.
 		routeirq	Do IRQ routing for all PCI devices.
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index f36efa73a470..ee8a4791a78b 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -23,6 +23,7 @@ Required properties:
         "fsl,ls1012a-pcie"
         "fsl,ls1028a-pcie"
   EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
@@ -30,39 +31,49 @@ Required properties:
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
 - fsl,pcie-scfg: Must include two entries.
   The first entry must be a link to the SCFG device node
-  The second entry must be '0' or '1' based on physical PCIe controller index.
+  The second entry is the physical PCIe controller index starting from '0'.
   This is used to get SCFG PEXN registers
 - dma-coherent: Indicates that the hardware IP block can ensure the coherency
   of the data transferred from/to the IP block. This can avoid the software
   cache flush/invalid actions, and improve the performance significantly.
 
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
 Example:
 
-	pcie@3400000 {
-		compatible = "fsl,ls1021a-pcie";
-		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-		reg-names = "regs", "config";
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-		interrupt-names = "intr";
-		fsl,pcie-scfg = <&scfg 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		num-lanes = <4>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
-			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-	};
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
deleted file mode 100644
index 0adb56d5645e..000000000000
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ /dev/null
@@ -1,397 +0,0 @@
-* Qualcomm PCI express root complex
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain
-			- "qcom,pcie-ipq8064" for ipq8064
-			- "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
-			- "qcom,pcie-apq8064" for apq8064
-			- "qcom,pcie-apq8084" for apq8084
-			- "qcom,pcie-msm8996" for msm8996 or apq8096
-			- "qcom,pcie-ipq4019" for ipq4019
-			- "qcom,pcie-ipq8074" for ipq8074
-			- "qcom,pcie-qcs404" for qcs404
-			- "qcom,pcie-sc8180x" for sc8180x
-			- "qcom,pcie-sdm845" for sdm845
-			- "qcom,pcie-sm8250" for sm8250
-			- "qcom,pcie-sm8450-pcie0" for PCIe0 on sm8450
-			- "qcom,pcie-sm8450-pcie1" for PCIe1 on sm8450
-			- "qcom,pcie-ipq6018" for ipq6018
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register ranges as listed in the reg-names property
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Must include the following entries
-			- "parf"   Qualcomm specific registers
-			- "dbi"	   DesignWare PCIe registers
-			- "elbi"   External local bus interface registers
-			- "config" PCIe configuration space
-			- "atu"    ATU address space (optional)
-
-- device_type:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "pci". As specified in snps,dw-pcie.yaml
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 3. As specified in snps,dw-pcie.yaml
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 2. As specified in snps,dw-pcie.yaml
-
-- ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: MSI interrupt
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain "msi"
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 1. As specified in snps,dw-pcie.yaml
-
-- interrupt-map-mask:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupt-map:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and clock specifier pairs as listed
-		    in clock-names property
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	Configuration AHB clock
-
-- clock-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core"	Clocks the pcie hw block
-			- "phy"		Clocks the pcie PHY block
-			- "aux" 	Clocks the pcie AUX block
-			- "ref" 	Clocks the pcie ref block
-- clock-names:
-	Usage: required for apq8084/ipq4019
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary (AUX) clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for msm8996/apq8096
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"	Pipe Clock driving internal logic
-			- "aux"		Auxiliary (AUX) clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "ahb"		AHB clock
-			- "aux"		Auxiliary clock
-
-- clock-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "axi_bridge"	AXI bridge clock
-			- "rchng"
-
-- clock-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	AHB clock
-			- "aux"		Auxiliary clock
-			- "master_bus"	AXI Master clock
-			- "slave_bus"	AXI Slave clock
-
-- clock-names:
-	Usage: required for sdm845
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "pipe"	PIPE clock
-
-- clock-names:
-	Usage: required for sc8180x and sm8250
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "ddrss_sf_tbu" PCIe SF TBU clock
-			- "pipe"	PIPE clock
-
-- clock-names:
-	Usage: required for sm8450-pcie0 and sm8450-pcie1
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"         Auxiliary clock
-			- "cfg"         Configuration clock
-			- "bus_master"  Master AXI clock
-			- "bus_slave"   Slave AXI clock
-			- "slave_q2a"   Slave Q2A clock
-			- "tbu"         PCIe TBU clock
-			- "ddrss_sf_tbu" PCIe SF TBU clock
-			- "pipe"        PIPE clock
-			- "pipe_mux"    PIPE MUX
-			- "phy_pipe"    PIPE output clock
-			- "ref"         REFERENCE clock
-			- "aggre0"	Aggre NoC PCIe0 AXI clock, only for sm8450-pcie0
-			- "aggre1"	Aggre NoC PCIe1 AXI clock
-
-- resets:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and reset specifier pairs as listed
-		    in reset-names property
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi"  AXI reset
-			- "ahb"  AHB reset
-			- "por"  POR reset
-			- "pci"  PCI reset
-			- "phy"  PHY reset
-
-- reset-names:
-	Usage: required for apq8084
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core" Core reset
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI master reset
-			- "axi_s"		AXI slave reset
-			- "pipe"		PIPE reset
-			- "axi_m_vmid"		VMID reset
-			- "axi_s_xpu"		XPU reset
-			- "parf"		PARF reset
-			- "phy"			PHY reset
-			- "axi_m_sticky"	AXI sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-			- "phy_ahb"		PHY AHB reset
-			- "ext"			EXT reset
-
-- reset-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-
-- reset-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "axi_s_sticky"	AXI Slave Sticky reset
-
-- reset-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-
-- reset-names:
-	Usage: required for sc8180x, sdm845, sm8250 and sm8450
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pci"			PCIe core reset
-
-- power-domains:
-	Usage: required for apq8084 and msm8996/apq8096
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pair to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral
-
-- vdda-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the core analog power supply
-
-- vdda_phy-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for PHY
-
-- vdda_refclk-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for IC which generates
-		    reference clock
-- vddpe-3v3-supply:
-	Usage: optional
-	Value type: <phandle>
-	Definition: A phandle to the PCIe endpoint power supply
-
-- phys:
-	Usage: required for apq8084 and qcs404
-	Value type: <phandle>
-	Definition: List of phandle(s) as listed in phy-names property
-
-- phy-names:
-	Usage: required for apq8084 and qcs404
-	Value type: <stringlist>
-	Definition: Should contain "pciephy"
-
-- <name>-gpios:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and GPIO specifier pairs. Should contain
-			- "perst-gpios"	PCIe endpoint reset signal line
-			- "wake-gpios"	PCIe endpoint wake signal line
-
-* Example for ipq/apq8064
-	pcie@1b500000 {
-		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
-		reg = <0x1b500000 0x1000
-		       0x1b502000 0x80
-		       0x1b600000 0x100
-		       0x0ff00000 0x100000>;
-		reg-names = "dbi", "elbi", "parf", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
-		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc PCIE_A_CLK>,
-			 <&gcc PCIE_H_CLK>,
-			 <&gcc PCIE_PHY_CLK>,
-			 <&gcc PCIE_AUX_CLK>,
-			 <&gcc PCIE_ALT_REF_CLK>;
-		clock-names = "core", "iface", "phy", "aux", "ref";
-		resets = <&gcc PCIE_ACLK_RESET>,
-			 <&gcc PCIE_HCLK_RESET>,
-			 <&gcc PCIE_POR_RESET>,
-			 <&gcc PCIE_PCI_RESET>,
-			 <&gcc PCIE_PHY_RESET>,
-			 <&gcc PCIE_EXT_RESET>;
-		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-		pinctrl-0 = <&pcie_pins_default>;
-		pinctrl-names = "default";
-	};
-
-* Example for apq8084
-	pcie0@fc520000 {
-		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
-		reg = <0xfc520000 0x2000>,
-		      <0xff000000 0x1000>,
-		      <0xff001000 0x1000>,
-		      <0xff002000 0x2000>;
-		reg-names = "parf", "dbi", "elbi", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
-			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
-		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_AUX_CLK>;
-		clock-names = "iface", "master_bus", "slave_bus", "aux";
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "core";
-		power-domains = <&gcc PCIE0_GDSC>;
-		vdda-supply = <&pma8084_l3>;
-		phys = <&pciephy0>;
-		phy-names = "pciephy";
-		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pcie0_pins_default>;
-		pinctrl-names = "default";
-	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 000000000000..0b69b12b849e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,714 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Stanimir Varbanov <svarbanov@mm-sol.com>
+
+description: |
+  Qualcomm PCIe root complex controller is bansed on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-ipq8064
+      - qcom,pcie-ipq8064-v2
+      - qcom,pcie-apq8064
+      - qcom,pcie-apq8084
+      - qcom,pcie-msm8996
+      - qcom,pcie-ipq4019
+      - qcom,pcie-ipq8074
+      - qcom,pcie-qcs404
+      - qcom,pcie-sc7280
+      - qcom,pcie-sc8180x
+      - qcom,pcie-sdm845
+      - qcom,pcie-sm8150
+      - qcom,pcie-sm8250
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+      - qcom,pcie-ipq6018
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 12
+
+  clock-names:
+    minItems: 3
+    maxItems: 12
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      oneOf:
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: aux # Auxiliary (AUX) clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: cfg # Configuration clock
+                - const: aux # Auxiliary (AUX) clock
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatibles:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 142bbe577763..bc0a9d1db750 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -19,20 +19,10 @@ description: |+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
 
-# We need a select here so we don't match all nodes with 'snps,dw-pcie'
-select:
-  properties:
-    compatible:
-      contains:
-        const: rockchip,rk3568-pcie
-  required:
-    - compatible
-
 properties:
   compatible:
     items:
       - const: rockchip,rk3568-pcie
-      - const: snps,dw-pcie
 
   reg:
     items:
@@ -110,7 +100,7 @@ examples:
         #size-cells = <2>;
 
         pcie3x2: pcie@fe280000 {
-            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
+            compatible = "rockchip,rk3568-pcie";
             reg = <0x3 0xc0800000 0x0 0x390000>,
                   <0x0 0xfe280000 0x0 0x10000>,
                   <0x3 0x80000000 0x0 0x100000>;
diff --git a/arch/x86/include/asm/e820/api.h b/arch/x86/include/asm/e820/api.h
index e8f58ddd06d9..5a39ed59b6db 100644
--- a/arch/x86/include/asm/e820/api.h
+++ b/arch/x86/include/asm/e820/api.h
@@ -4,6 +4,9 @@
 
 #include <asm/e820/types.h>
 
+struct device;
+struct resource;
+
 extern struct e820_table *e820_table;
 extern struct e820_table *e820_table_kexec;
 extern struct e820_table *e820_table_firmware;
@@ -43,6 +46,8 @@ extern void e820__register_nosave_regions(unsigned long limit_pfn);
 
 extern int  e820__get_entry_type(u64 start, u64 end);
 
+extern void remove_e820_regions(struct device *dev, struct resource *avail);
+
 /*
  * Returns true iff the specified range [start,end) is completely contained inside
  * the ISA region.
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 1307cd689d2a..f52a886d35cf 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -42,6 +42,8 @@ do {						\
 #define PCI_ROOT_NO_CRS		0x100000
 #define PCI_NOASSIGN_BARS	0x200000
 #define PCI_BIG_ROOT_WINDOW	0x400000
+#define PCI_USE_E820		0x800000
+#define PCI_NO_E820		0x1000000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
index 9b9fb7882c20..db2b350a37b7 100644
--- a/arch/x86/kernel/resource.c
+++ b/arch/x86/kernel/resource.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/dev_printk.h>
 #include <linux/ioport.h>
 #include <asm/e820/api.h>
 
@@ -23,16 +24,27 @@ static void resource_clip(struct resource *res, resource_size_t start,
 		res->start = end + 1;
 }
 
-static void remove_e820_regions(struct resource *avail)
+void remove_e820_regions(struct device *dev, struct resource *avail)
 {
 	int i;
 	struct e820_entry *entry;
+	u64 e820_start, e820_end;
+	struct resource orig = *avail;
+
+	if (!(avail->flags & IORESOURCE_MEM))
+		return;
 
 	for (i = 0; i < e820_table->nr_entries; i++) {
 		entry = &e820_table->entries[i];
-
-		resource_clip(avail, entry->addr,
-			      entry->addr + entry->size - 1);
+		e820_start = entry->addr;
+		e820_end = entry->addr + entry->size - 1;
+
+		resource_clip(avail, e820_start, e820_end);
+		if (orig.start != avail->start || orig.end != avail->end) {
+			dev_info(dev, "clipped %pR to %pR for e820 entry [mem %#010Lx-%#010Lx]\n",
+				 &orig, avail, e820_start, e820_end);
+			orig = *avail;
+		}
 	}
 }
 
@@ -43,9 +55,6 @@ void arch_remove_reservations(struct resource *avail)
 	 * the low 1MB unconditionally, as this area is needed for some ISA
 	 * cards requiring a memory range, e.g. the i82365 PCMCIA controller.
 	 */
-	if (avail->flags & IORESOURCE_MEM) {
+	if (avail->flags & IORESOURCE_MEM)
 		resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
-
-		remove_e820_regions(avail);
-	}
 }
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 052f1d78a562..a4f43054bc79 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -8,6 +8,7 @@
 #include <linux/pci-acpi.h>
 #include <asm/numa.h>
 #include <asm/pci_x86.h>
+#include <asm/e820/api.h>
 
 struct pci_root_info {
 	struct acpi_pci_root_info common;
@@ -19,6 +20,7 @@ struct pci_root_info {
 #endif
 };
 
+static bool pci_use_e820 = true;
 static bool pci_use_crs = true;
 static bool pci_ignore_seg;
 
@@ -41,6 +43,14 @@ static int __init set_ignore_seg(const struct dmi_system_id *id)
 	return 0;
 }
 
+static int __init set_no_e820(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO "PCI: %s detected: not clipping E820 regions from _CRS\n",
+	       id->ident);
+	pci_use_e820 = false;
+	return 0;
+}
+
 static const struct dmi_system_id pci_crs_quirks[] __initconst = {
 	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
 	{
@@ -135,6 +145,51 @@ static const struct dmi_system_id pci_crs_quirks[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
 		},
 	},
+
+	/*
+	 * Many Lenovo models with "IIL" in their DMI_PRODUCT_VERSION have
+	 * an E820 reserved region that covers the entire 32-bit host
+	 * bridge memory window from _CRS.  Using the E820 region to clip
+	 * _CRS means no space is available for hot-added or uninitialized
+	 * PCI devices.  This typically breaks I2C controllers for touchpads
+	 * and hot-added Thunderbolt devices.  See the commit log for
+	 * models known to require this quirk and related bug reports.
+	 */
+	{
+		.callback = set_no_e820,
+		.ident = "Lenovo *IIL* product version",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "IIL"),
+		},
+	},
+
+	/*
+	 * The Acer Spin 5 (SP513-54N) has the same E820 reservation covering
+	 * the entire _CRS 32-bit window issue as the Lenovo *IIL* models.
+	 * See https://bugs.launchpad.net/bugs/1884232
+	 */
+	{
+		.callback = set_no_e820,
+		.ident = "Acer Spin 5 (SP513-54N)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Spin SP513-54N"),
+		},
+	},
+
+	/*
+	 * Clevo X170KM-G barebones have the same E820 reservation covering
+	 * the entire _CRS 32-bit window issue as the Lenovo *IIL* models.
+	 * See https://bugzilla.kernel.org/show_bug.cgi?id=214259
+	 */
+	{
+		.callback = set_no_e820,
+		.ident = "Clevo X170KM-G Barebone",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+		},
+	},
 	{}
 };
 
@@ -145,6 +200,27 @@ void __init pci_acpi_crs_quirks(void)
 	if (year >= 0 && year < 2008 && iomem_resource.end <= 0xffffffff)
 		pci_use_crs = false;
 
+	/*
+	 * Some firmware includes unusable space (host bridge registers,
+	 * hidden PCI device BARs, etc) in PCI host bridge _CRS.  This is a
+	 * firmware defect, and 4dc2287c1805 ("x86: avoid E820 regions when
+	 * allocating address space") has clipped out the unusable space in
+	 * the past.
+	 *
+	 * But other firmware supplies E820 reserved regions that cover
+	 * entire _CRS windows, so clipping throws away the entire window,
+	 * leaving none for hot-added or uninitialized devices.  These E820
+	 * entries are probably *not* a firmware defect, so disable the
+	 * clipping by default for post-2022 machines.
+	 *
+	 * We already have quirks to disable clipping for pre-2023
+	 * machines, and we'll likely need quirks to *enable* clipping for
+	 * post-2022 machines that incorrectly include unusable space in
+	 * _CRS.
+	 */
+	if (year >= 2023)
+		pci_use_e820 = false;
+
 	dmi_check_system(pci_crs_quirks);
 
 	/*
@@ -160,6 +236,17 @@ void __init pci_acpi_crs_quirks(void)
 	       "if necessary, use \"pci=%s\" and report a bug\n",
 	       pci_use_crs ? "Using" : "Ignoring",
 	       pci_use_crs ? "nocrs" : "use_crs");
+
+	/* "pci=use_e820"/"pci=no_e820" on the kernel cmdline takes precedence */
+	if (pci_probe & PCI_NO_E820)
+		pci_use_e820 = false;
+	else if (pci_probe & PCI_USE_E820)
+		pci_use_e820 = true;
+
+	printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n",
+	       pci_use_e820 ? "Using" : "Ignoring");
+	if (pci_probe & (PCI_NO_E820 | PCI_USE_E820))
+		printk(KERN_INFO "PCI: Please notify linux-pci@vger.kernel.org so future kernels can this automatically\n");
 }
 
 #ifdef	CONFIG_PCI_MMCONFIG
@@ -299,6 +386,12 @@ static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
 	int status;
 
 	status = acpi_pci_probe_root_resources(ci);
+
+	if (pci_use_e820) {
+		resource_list_for_each_entry(entry, &ci->resources)
+			remove_e820_regions(&device->dev, entry->res);
+	}
+
 	if (pci_use_crs) {
 		resource_list_for_each_entry_safe(entry, tmp, &ci->resources)
 			if (resource_is_pcicfg_ioport(entry->res))
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 9e1e6b8d8876..ddb798603201 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -595,6 +595,14 @@ char *__init pcibios_setup(char *str)
 	} else if (!strcmp(str, "nocrs")) {
 		pci_probe |= PCI_ROOT_NO_CRS;
 		return NULL;
+	} else if (!strcmp(str, "use_e820")) {
+		pci_probe |= PCI_USE_E820;
+		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+		return NULL;
+	} else if (!strcmp(str, "no_e820")) {
+		pci_probe |= PCI_NO_E820;
+		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+		return NULL;
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 	} else if (!strcmp(str, "big_root_window")) {
 		pci_probe |= PCI_BIG_ROOT_WINDOW;
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 768d33f9ebc8..a82f845cc4b5 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -69,6 +69,7 @@ struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
 	unsigned int		quirk_retrain_flag:1;
 	unsigned int		quirk_detect_quiet_flag:1;
+	unsigned int		quirk_disable_flr:1;
 	u32			linkdown_irq_regfield;
 	unsigned int		byte_access_allowed:1;
 };
@@ -307,6 +308,7 @@ static const struct j721e_pcie_data j7200_pcie_rc_data = {
 static const struct j721e_pcie_data j7200_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
 	.quirk_detect_quiet_flag = true,
+	.quirk_disable_flr = true,
 };
 
 static const struct j721e_pcie_data am64_pcie_rc_data = {
@@ -405,6 +407,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			return -ENOMEM;
 
 		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
+		ep->quirk_disable_flr = data->quirk_disable_flr;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 88e05b9c2e5b..b8b655d4047e 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -187,8 +187,7 @@ static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 	struct cdns_pcie *pcie = &ep->pcie;
 	u32 r;
 
-	r = find_first_zero_bit(&ep->ob_region_map,
-				sizeof(ep->ob_region_map) * BITS_PER_LONG);
+	r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG);
 	if (r >= ep->max_regions - 1) {
 		dev_err(&epc->dev, "no free outbound region\n");
 		return -EINVAL;
@@ -565,7 +564,8 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	struct device *dev = pcie->dev;
-	int ret;
+	int max_epfs = sizeof(epc->function_num_map) * 8;
+	int ret, value, epf;
 
 	/*
 	 * BIT(0) is hardwired to 1, hence function 0 is always enabled
@@ -573,6 +573,21 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 	 */
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map);
 
+	if (ep->quirk_disable_flr) {
+		for (epf = 0; epf < max_epfs; epf++) {
+			if (!(epc->function_num_map & BIT(epf)))
+				continue;
+
+			value = cdns_pcie_ep_fn_readl(pcie, epf,
+					CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET +
+					PCI_EXP_DEVCAP);
+			value &= ~PCI_EXP_DEVCAP_FLR;
+			cdns_pcie_ep_fn_writel(pcie, epf,
+					CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET +
+					PCI_EXP_DEVCAP, value);
+		}
+	}
+
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
 		dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index fb96d37a135c..940c7dd701d6 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -123,6 +123,14 @@ static int cdns_pcie_retrain(struct cdns_pcie *pcie)
 	return ret;
 }
 
+static void cdns_pcie_host_enable_ptm_response(struct cdns_pcie *pcie)
+{
+	u32 val;
+
+	val = cdns_pcie_readl(pcie, CDNS_PCIE_LM_PTM_CTRL);
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_PTM_CTRL, val | CDNS_PCIE_LM_TPM_CTRL_PTMRSEN);
+}
+
 static int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc)
 {
 	struct cdns_pcie *pcie = &rc->pcie;
@@ -501,6 +509,8 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	if (rc->quirk_detect_quiet_flag)
 		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
 
+	cdns_pcie_host_enable_ptm_response(pcie);
+
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
 		dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index c8a27b6290ce..190786e47df9 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -116,6 +116,10 @@
 #define LM_RC_BAR_CFG_APERTURE(bar, aperture)		\
 					(((aperture) - 2) << ((bar) * 8))
 
+/* PTM Control Register */
+#define CDNS_PCIE_LM_PTM_CTRL 	(CDNS_PCIE_LM_BASE + 0x0da8)
+#define CDNS_PCIE_LM_TPM_CTRL_PTMRSEN 	BIT(17)
+
 /*
  * Endpoint Function Registers (PCI configuration space for endpoint functions)
  */
@@ -123,6 +127,7 @@
 
 #define CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET	0x90
 #define CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET	0xb0
+#define CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET	0xc0
 #define CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET	0x200
 
 /*
@@ -357,6 +362,7 @@ struct cdns_pcie_epf {
  *        minimize time between read and write
  * @epf: Structure to hold info about endpoint function
  * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
+ * @quirk_disable_flr: Disable FLR (Function Level Reset) quirk flag
  */
 struct cdns_pcie_ep {
 	struct cdns_pcie	pcie;
@@ -372,6 +378,7 @@ struct cdns_pcie_ep {
 	spinlock_t		lock;
 	struct cdns_pcie_epf	*epf;
 	unsigned int		quirk_detect_quiet_flag:1;
+	unsigned int		quirk_disable_flr:1;
 };
 
 
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6619e3caffe2..7a285fb0f619 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -408,6 +408,11 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
 				ret);
 	}
+
+	/* Some boards don't have PCIe reset GPIO. */
+	if (gpio_is_valid(imx6_pcie->reset_gpio))
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+					imx6_pcie->gpio_active_high);
 }
 
 static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
@@ -540,15 +545,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	/* allow the clocks to stabilize */
 	usleep_range(200, 500);
 
-	/* Some boards don't have PCIe reset GPIO. */
-	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
-					imx6_pcie->gpio_active_high);
-		msleep(100);
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
-					!imx6_pcie->gpio_active_high);
-	}
-
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX8MQ:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
@@ -595,6 +591,15 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
+	/* Some boards don't have PCIe reset GPIO. */
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		msleep(100);
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+					!imx6_pcie->gpio_active_high);
+		/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
+		msleep(100);
+	}
+
 	return;
 
 err_ref_clk:
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 2fa86f32d964..9979302532b7 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -396,7 +396,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						      sizeof(pp->msi_msg),
 						      DMA_FROM_DEVICE,
 						      DMA_ATTR_SKIP_CPU_SYNC);
-			if (dma_mapping_error(pci->dev, pp->msi_data)) {
+			ret = dma_mapping_error(pci->dev, pp->msi_data);
+			if (ret) {
 				dev_err(pci->dev, "Failed to map MSI data\n");
 				pp->msi_data = 0;
 				goto err_free_msi;
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index c9b341e55cbb..8c5bb9d7cc36 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -10,9 +10,12 @@
 
 #include <linux/clk.h>
 #include <linux/gpio/consumer.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -26,6 +29,7 @@
  */
 #define HIWORD_UPDATE(mask, val) (((mask) << 16) | (val))
 #define HIWORD_UPDATE_BIT(val)	HIWORD_UPDATE(val, val)
+#define HIWORD_DISABLE_BIT(val)	HIWORD_UPDATE(val, ~val)
 
 #define to_rockchip_pcie(x) dev_get_drvdata((x)->dev)
 
@@ -36,10 +40,12 @@
 #define PCIE_LINKUP			(PCIE_SMLH_LINKUP | PCIE_RDLH_LINKUP)
 #define PCIE_L0S_ENTRY			0x11
 #define PCIE_CLIENT_GENERAL_CONTROL	0x0
+#define PCIE_CLIENT_INTR_STATUS_LEGACY	0x8
+#define PCIE_CLIENT_INTR_MASK_LEGACY	0x1c
 #define PCIE_CLIENT_GENERAL_DEBUG	0x104
-#define PCIE_CLIENT_HOT_RESET_CTRL      0x180
+#define PCIE_CLIENT_HOT_RESET_CTRL	0x180
 #define PCIE_CLIENT_LTSSM_STATUS	0x300
-#define PCIE_LTSSM_ENABLE_ENHANCE       BIT(4)
+#define PCIE_LTSSM_ENABLE_ENHANCE	BIT(4)
 #define PCIE_LTSSM_STATUS_MASK		GENMASK(5, 0)
 
 struct rockchip_pcie {
@@ -51,6 +57,7 @@ struct rockchip_pcie {
 	struct reset_control		*rst;
 	struct gpio_desc		*rst_gpio;
 	struct regulator                *vpcie3v3;
+	struct irq_domain		*irq_domain;
 };
 
 static int rockchip_pcie_readl_apb(struct rockchip_pcie *rockchip,
@@ -65,6 +72,78 @@ static void rockchip_pcie_writel_apb(struct rockchip_pcie *rockchip,
 	writel_relaxed(val, rockchip->apb_base + reg);
 }
 
+static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct rockchip_pcie *rockchip = irq_desc_get_handler_data(desc);
+	unsigned long reg, hwirq;
+
+	chained_irq_enter(chip, desc);
+
+	reg = rockchip_pcie_readl_apb(rockchip, PCIE_CLIENT_INTR_STATUS_LEGACY);
+
+	for_each_set_bit(hwirq, &reg, 4)
+		generic_handle_domain_irq(rockchip->irq_domain, hwirq);
+
+	chained_irq_exit(chip, desc);
+}
+
+static void rockchip_intx_mask(struct irq_data *data)
+{
+	rockchip_pcie_writel_apb(irq_data_get_irq_chip_data(data),
+				 HIWORD_UPDATE_BIT(BIT(data->hwirq)),
+				 PCIE_CLIENT_INTR_MASK_LEGACY);
+};
+
+static void rockchip_intx_unmask(struct irq_data *data)
+{
+	rockchip_pcie_writel_apb(irq_data_get_irq_chip_data(data),
+				 HIWORD_DISABLE_BIT(BIT(data->hwirq)),
+				 PCIE_CLIENT_INTR_MASK_LEGACY);
+};
+
+static struct irq_chip rockchip_intx_irq_chip = {
+	.name			= "INTx",
+	.irq_mask		= rockchip_intx_mask,
+	.irq_unmask		= rockchip_intx_unmask,
+	.flags			= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int rockchip_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+				  irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &rockchip_intx_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = rockchip_pcie_intx_map,
+};
+
+static int rockchip_pcie_init_irq_domain(struct rockchip_pcie *rockchip)
+{
+	struct device *dev = rockchip->pci.dev;
+	struct device_node *intc;
+
+	intc = of_get_child_by_name(dev->of_node, "legacy-interrupt-controller");
+	if (!intc) {
+		dev_err(dev, "missing child interrupt-controller node\n");
+		return -EINVAL;
+	}
+
+	rockchip->irq_domain = irq_domain_add_linear(intc, PCI_NUM_INTX,
+						    &intx_domain_ops, rockchip);
+	of_node_put(intc);
+	if (!rockchip->irq_domain) {
+		dev_err(dev, "failed to get a INTx IRQ domain\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void rockchip_pcie_enable_ltssm(struct rockchip_pcie *rockchip)
 {
 	rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_ENABLE_LTSSM,
@@ -111,7 +190,20 @@ static int rockchip_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
+	struct device *dev = rockchip->pci.dev;
 	u32 val = HIWORD_UPDATE_BIT(PCIE_LTSSM_ENABLE_ENHANCE);
+	int irq, ret;
+
+	irq = of_irq_get_byname(dev->of_node, "legacy");
+	if (irq < 0)
+		return irq;
+
+	ret = rockchip_pcie_init_irq_domain(rockchip);
+	if (ret < 0)
+		dev_err(dev, "failed to init irq domain\n");
+
+	irq_set_chained_handler_and_data(irq, rockchip_pcie_legacy_int_handler,
+					 rockchip);
 
 	/* LTSSM enable control mode */
 	rockchip_pcie_writel_apb(rockchip, val, PCIE_CLIENT_HOT_RESET_CTRL);
@@ -152,6 +244,11 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,
 	if (IS_ERR(rockchip->rst_gpio))
 		return PTR_ERR(rockchip->rst_gpio);
 
+	rockchip->rst = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(rockchip->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rockchip->rst),
+				     "failed to get reset lines\n");
+
 	return 0;
 }
 
@@ -182,18 +279,6 @@ static void rockchip_pcie_phy_deinit(struct rockchip_pcie *rockchip)
 	phy_power_off(rockchip->phy);
 }
 
-static int rockchip_pcie_reset_control_release(struct rockchip_pcie *rockchip)
-{
-	struct device *dev = rockchip->pci.dev;
-
-	rockchip->rst = devm_reset_control_array_get_exclusive(dev);
-	if (IS_ERR(rockchip->rst))
-		return dev_err_probe(dev, PTR_ERR(rockchip->rst),
-				     "failed to get reset lines\n");
-
-	return reset_control_deassert(rockchip->rst);
-}
-
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = rockchip_pcie_link_up,
 	.start_link = rockchip_pcie_start_link,
@@ -222,6 +307,10 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = reset_control_assert(rockchip->rst);
+	if (ret)
+		return ret;
+
 	/* DON'T MOVE ME: must be enable before PHY init */
 	rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
 	if (IS_ERR(rockchip->vpcie3v3)) {
@@ -241,7 +330,7 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_regulator;
 
-	ret = rockchip_pcie_reset_control_release(rockchip);
+	ret = reset_control_deassert(rockchip->rst);
 	if (ret)
 		goto deinit_phy;
 
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 6ce8eddf3a37..ec99116ad05c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -223,11 +223,8 @@ static void qcom_pcie_dw_stop_link(struct dw_pcie *pci)
 	disable_irq(pcie_ep->perst_irq);
 }
 
-static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
+static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
 {
-	struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
-	struct device *dev = pci->dev;
-	u32 val, offset;
 	int ret;
 
 	ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks),
@@ -247,6 +244,38 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 	if (ret)
 		goto err_phy_exit;
 
+	return 0;
+
+err_phy_exit:
+	phy_exit(pcie_ep->phy);
+err_disable_clk:
+	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
+				   qcom_pcie_ep_clks);
+
+	return ret;
+}
+
+static void qcom_pcie_disable_resources(struct qcom_pcie_ep *pcie_ep)
+{
+	phy_power_off(pcie_ep->phy);
+	phy_exit(pcie_ep->phy);
+	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
+				   qcom_pcie_ep_clks);
+}
+
+static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
+{
+	struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+	struct device *dev = pci->dev;
+	u32 val, offset;
+	int ret;
+
+	ret = qcom_pcie_enable_resources(pcie_ep);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
+		return ret;
+	}
+
 	/* Assert WAKE# to RC to indicate device is ready */
 	gpiod_set_value_cansleep(pcie_ep->wake, 1);
 	usleep_range(WAKE_DELAY_US, WAKE_DELAY_US + 500);
@@ -335,7 +364,7 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 	ret = dw_pcie_ep_init_complete(&pcie_ep->pci.ep);
 	if (ret) {
 		dev_err(dev, "Failed to complete initialization: %d\n", ret);
-		goto err_phy_power_off;
+		goto err_disable_resources;
 	}
 
 	/*
@@ -355,13 +384,8 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 
 	return 0;
 
-err_phy_power_off:
-	phy_power_off(pcie_ep->phy);
-err_phy_exit:
-	phy_exit(pcie_ep->phy);
-err_disable_clk:
-	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
-				   qcom_pcie_ep_clks);
+err_disable_resources:
+	qcom_pcie_disable_resources(pcie_ep);
 
 	return ret;
 }
@@ -376,10 +400,7 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci)
 		return;
 	}
 
-	phy_power_off(pcie_ep->phy);
-	phy_exit(pcie_ep->phy);
-	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
-				   qcom_pcie_ep_clks);
+	qcom_pcie_disable_resources(pcie_ep);
 	pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
 }
 
@@ -643,43 +664,26 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks),
-				      qcom_pcie_ep_clks);
-	if (ret)
+	ret = qcom_pcie_enable_resources(pcie_ep);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
 		return ret;
-
-	ret = qcom_pcie_ep_core_reset(pcie_ep);
-	if (ret)
-		goto err_disable_clk;
-
-	ret = phy_init(pcie_ep->phy);
-	if (ret)
-		goto err_disable_clk;
-
-	/* PHY needs to be powered on for dw_pcie_ep_init() */
-	ret = phy_power_on(pcie_ep->phy);
-	if (ret)
-		goto err_phy_exit;
+	}
 
 	ret = dw_pcie_ep_init(&pcie_ep->pci.ep);
 	if (ret) {
 		dev_err(dev, "Failed to initialize endpoint: %d\n", ret);
-		goto err_phy_power_off;
+		goto err_disable_resources;
 	}
 
 	ret = qcom_pcie_ep_enable_irq_resources(pdev, pcie_ep);
 	if (ret)
-		goto err_phy_power_off;
+		goto err_disable_resources;
 
 	return 0;
 
-err_phy_power_off:
-	phy_power_off(pcie_ep->phy);
-err_phy_exit:
-	phy_exit(pcie_ep->phy);
-err_disable_clk:
-	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
-				   qcom_pcie_ep_clks);
+err_disable_resources:
+	qcom_pcie_disable_resources(pcie_ep);
 
 	return ret;
 }
@@ -691,10 +695,7 @@ static int qcom_pcie_ep_remove(struct platform_device *pdev)
 	if (pcie_ep->link_status == QCOM_PCIE_EP_LINK_DISABLED)
 		return 0;
 
-	phy_power_off(pcie_ep->phy);
-	phy_exit(pcie_ep->phy);
-	clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks),
-				   qcom_pcie_ep_clks);
+	qcom_pcie_disable_resources(pcie_ep);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 816028c0f6ed..2ea13750b492 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		goto err_disable_clocks;
 	}
 
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		goto err_disable_clocks;
-	}
-
 	/* Wait for reset to complete, required on SM8450 */
 	usleep_range(1000, 1500);
 
@@ -1523,6 +1517,13 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
 	.has_tbu_clk = true,
 };
 
+static const struct qcom_pcie_cfg sm8150_cfg = {
+	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
+	 * 1.9.0, so reuse the same.
+	 */
+	.ops = &ops_1_9_0,
+};
+
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
@@ -1627,22 +1628,21 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pp->ops = &qcom_pcie_dw_ops;
 
 	ret = phy_init(pcie->phy);
-	if (ret) {
-		pm_runtime_disable(&pdev->dev);
+	if (ret)
 		goto err_pm_runtime_put;
-	}
 
 	platform_set_drvdata(pdev, pcie);
 
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		pm_runtime_disable(&pdev->dev);
-		goto err_pm_runtime_put;
+		goto err_phy_exit;
 	}
 
 	return 0;
 
+err_phy_exit:
+	phy_exit(pcie->phy);
 err_pm_runtime_put:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
@@ -1660,6 +1660,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
 	{ .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
 	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
+	{ .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg },
 	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
 	{ .compatible = "qcom,pcie-sc8180x", .data = &sc8180x_cfg },
 	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg },
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index b1b5f836a806..cc2678490162 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -186,8 +186,6 @@
 #define N_FTS_VAL					52
 #define FTS_VAL						52
 
-#define PORT_LOGIC_MSI_CTRL_INT_0_EN		0x828
-
 #define GEN3_EQ_CONTROL_OFF			0x8a8
 #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT	8
 #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK	GENMASK(23, 8)
@@ -2189,9 +2187,6 @@ static int tegra194_pcie_suspend_noirq(struct device *dev)
 	if (!pcie->link_state)
 		return 0;
 
-	/* Save MSI interrupt vector */
-	pcie->msi_ctrl_int = dw_pcie_readl_dbi(&pcie->pci,
-					       PORT_LOGIC_MSI_CTRL_INT_0_EN);
 	tegra_pcie_downstream_dev_to_D0(pcie);
 	tegra194_pcie_pme_turnoff(pcie);
 	tegra_pcie_unconfig_controller(pcie);
@@ -2223,10 +2218,6 @@ static int tegra194_pcie_resume_noirq(struct device *dev)
 	if (ret < 0)
 		goto fail_host_init;
 
-	/* Restore MSI interrupt vector */
-	dw_pcie_writel_dbi(&pcie->pci, PORT_LOGIC_MSI_CTRL_INT_0_EN,
-			   pcie->msi_ctrl_int);
-
 	return 0;
 
 fail_host_init:
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 8f76d4bda356..c1ffdb06c971 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -66,6 +67,12 @@
 #define  PCIE_STAT_BUS                  0xff00
 #define  PCIE_STAT_DEV                  0x1f0000
 #define  PCIE_STAT_LINK_DOWN		BIT(0)
+#define PCIE_SSPL_OFF		0x1a0c
+#define  PCIE_SSPL_VALUE_SHIFT		0
+#define  PCIE_SSPL_VALUE_MASK		GENMASK(7, 0)
+#define  PCIE_SSPL_SCALE_SHIFT		8
+#define  PCIE_SSPL_SCALE_MASK		GENMASK(9, 8)
+#define  PCIE_SSPL_ENABLE		BIT(16)
 #define PCIE_RC_RTSTA		0x1a14
 #define PCIE_DEBUG_CTRL         0x1a60
 #define  PCIE_DEBUG_SOFT_RESET		BIT(20)
@@ -111,6 +118,8 @@ struct mvebu_pcie_port {
 	struct mvebu_pcie_window iowin;
 	u32 saved_pcie_stat;
 	struct resource regs;
+	u8 slot_power_limit_value;
+	u8 slot_power_limit_scale;
 	struct irq_domain *intx_irq_domain;
 	raw_spinlock_t irq_lock;
 	int intx_irq;
@@ -239,7 +248,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u32 ctrl, lnkcap, cmd, dev_rev, unmask;
+	u32 ctrl, lnkcap, cmd, dev_rev, unmask, sspl;
 
 	/* Setup PCIe controller to Root Complex mode. */
 	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
@@ -292,6 +301,20 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 	/* Point PCIe unit MBUS decode windows to DRAM space. */
 	mvebu_pcie_setup_wins(port);
 
+	/*
+	 * Program Root Port to automatically send Set_Slot_Power_Limit
+	 * PCIe Message when changing status from Dl_Down to Dl_Up and valid
+	 * slot power limit was specified.
+	 */
+	sspl = mvebu_readl(port, PCIE_SSPL_OFF);
+	sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE);
+	if (port->slot_power_limit_value) {
+		sspl |= port->slot_power_limit_value << PCIE_SSPL_VALUE_SHIFT;
+		sspl |= port->slot_power_limit_scale << PCIE_SSPL_SCALE_SHIFT;
+		sspl |= PCIE_SSPL_ENABLE;
+	}
+	mvebu_writel(port, sspl, PCIE_SSPL_OFF);
+
 	/* Mask all interrupt sources. */
 	mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
 
@@ -628,9 +651,24 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 			  (PCI_EXP_LNKSTA_DLLLA << 16) : 0);
 		break;
 
-	case PCI_EXP_SLTCTL:
-		*value = PCI_EXP_SLTSTA_PDS << 16;
+	case PCI_EXP_SLTCTL: {
+		u16 slotctl = le16_to_cpu(bridge->pcie_conf.slotctl);
+		u16 slotsta = le16_to_cpu(bridge->pcie_conf.slotsta);
+		u32 val = 0;
+		/*
+		 * When slot power limit was not specified in DT then
+		 * ASPL_DISABLE bit is stored only in emulated config space.
+		 * Otherwise reflect status of PCIE_SSPL_ENABLE bit in HW.
+		 */
+		if (!port->slot_power_limit_value)
+			val |= slotctl & PCI_EXP_SLTCTL_ASPL_DISABLE;
+		else if (!(mvebu_readl(port, PCIE_SSPL_OFF) & PCIE_SSPL_ENABLE))
+			val |= PCI_EXP_SLTCTL_ASPL_DISABLE;
+		/* This callback is 32-bit and in high bits is slot status. */
+		val |= slotsta << 16;
+		*value = val;
 		break;
+	}
 
 	case PCI_EXP_RTSTA:
 		*value = mvebu_readl(port, PCIE_RC_RTSTA);
@@ -774,6 +812,22 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 		mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
 		break;
 
+	case PCI_EXP_SLTCTL:
+		/*
+		 * Allow to change PCIE_SSPL_ENABLE bit only when slot power
+		 * limit was specified in DT and configured into HW.
+		 */
+		if ((mask & PCI_EXP_SLTCTL_ASPL_DISABLE) &&
+		    port->slot_power_limit_value) {
+			u32 sspl = mvebu_readl(port, PCIE_SSPL_OFF);
+			if (new & PCI_EXP_SLTCTL_ASPL_DISABLE)
+				sspl &= ~PCIE_SSPL_ENABLE;
+			else
+				sspl |= PCIE_SSPL_ENABLE;
+			mvebu_writel(port, sspl, PCIE_SSPL_OFF);
+		}
+		break;
+
 	case PCI_EXP_RTSTA:
 		/*
 		 * PME Status bit in Root Status Register (PCIE_RC_RTSTA)
@@ -868,8 +922,26 @@ static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 	/*
 	 * Older mvebu hardware provides PCIe Capability structure only in
 	 * version 1. New hardware provides it in version 2.
+	 * Enable slot support which is emulated.
 	 */
-	bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver);
+	bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver | PCI_EXP_FLAGS_SLOT);
+
+	/*
+	 * Set Presence Detect State bit permanently as there is no support for
+	 * unplugging PCIe card from the slot. Assume that PCIe card is always
+	 * connected in slot.
+	 *
+	 * Set physical slot number to port+1 as mvebu ports are indexed from
+	 * zero and zero value is reserved for ports within the same silicon
+	 * as Root Port which is not mvebu case.
+	 *
+	 * Also set correct slot power limit.
+	 */
+	bridge->pcie_conf.slotcap = cpu_to_le32(
+		FIELD_PREP(PCI_EXP_SLTCAP_SPLV, port->slot_power_limit_value) |
+		FIELD_PREP(PCI_EXP_SLTCAP_SPLS, port->slot_power_limit_scale) |
+		FIELD_PREP(PCI_EXP_SLTCAP_PSN, port->port+1));
+	bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
 
 	bridge->subsystem_vendor_id = ssdev_id & 0xffff;
 	bridge->subsystem_id = ssdev_id >> 16;
@@ -1191,6 +1263,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 {
 	struct device *dev = &pcie->pdev->dev;
 	enum of_gpio_flags flags;
+	u32 slot_power_limit;
 	int reset_gpio, ret;
 	u32 num_lanes;
 
@@ -1291,6 +1364,15 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 		port->reset_gpio = gpio_to_desc(reset_gpio);
 	}
 
+	slot_power_limit = of_pci_get_slot_power_limit(child,
+				&port->slot_power_limit_value,
+				&port->slot_power_limit_scale);
+	if (slot_power_limit)
+		dev_info(dev, "%s: Slot power limit %u.%uW\n",
+			 port->name,
+			 slot_power_limit / 1000,
+			 (slot_power_limit / 100) % 10);
+
 	port->clk = of_clk_get_by_name(child, NULL);
 	if (IS_ERR(port->clk)) {
 		dev_err(dev, "%s: cannot get clock\n", port->name);
@@ -1588,7 +1670,7 @@ static int mvebu_pcie_remove(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie = platform_get_drvdata(pdev);
 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-	u32 cmd;
+	u32 cmd, sspl;
 	int i;
 
 	/* Remove PCI bus with all devices. */
@@ -1625,6 +1707,11 @@ static int mvebu_pcie_remove(struct platform_device *pdev)
 		/* Free config space for emulated root bridge. */
 		pci_bridge_emul_cleanup(&port->bridge);
 
+		/* Disable sending Set_Slot_Power_Limit PCIe Message. */
+		sspl = mvebu_readl(port, PCIE_SSPL_OFF);
+		sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE);
+		mvebu_writel(port, sspl, PCIE_SSPL_OFF);
+
 		/* Disable and clear BARs and windows. */
 		mvebu_pcie_disable_wins(port);
 
diff --git a/drivers/pci/controller/pci-versatile.c b/drivers/pci/controller/pci-versatile.c
index 653d5d0ecf81..7991d334e0f1 100644
--- a/drivers/pci/controller/pci-versatile.c
+++ b/drivers/pci/controller/pci-versatile.c
@@ -31,10 +31,9 @@ static u32 pci_slot_ignore;
 
 static int __init versatile_pci_slot_ignore(char *str)
 {
-	int retval;
 	int slot;
 
-	while ((retval = get_option(&str, &slot))) {
+	while (get_option(&str, &slot)) {
 		if ((slot < 0) || (slot > 31))
 			pr_err("Illegal slot value: %d\n", slot);
 		else
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 3e8d70bfabc6..5d9fd36b02d1 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -838,6 +838,14 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
 	if (err)
 		return err;
 
+	/*
+	 * The controller may have been left out of reset by the bootloader
+	 * so make sure that we get a clean start by asserting resets here.
+	 */
+	reset_control_assert(pcie->phy_reset);
+	reset_control_assert(pcie->mac_reset);
+	usleep_range(10, 20);
+
 	/* Don't touch the hardware registers before power up */
 	err = mtk_pcie_power_up(pcie);
 	if (err)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index ddfbd4aebdec..be8bd919cb88 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -1008,6 +1008,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
 					   "mediatek,generic-pciecfg");
 	if (cfg_node) {
 		pcie->cfg = syscon_node_to_regmap(cfg_node);
+		of_node_put(cfg_node);
 		if (IS_ERR(pcie->cfg))
 			return PTR_ERR(pcie->cfg);
 	}
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 29d8e81e4181..dd5dba419047 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -406,6 +406,7 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *base)
 static void mc_handle_msi(struct irq_desc *desc)
 {
 	struct mc_pcie *port = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct device *dev = port->dev;
 	struct mc_msi *msi = &port->msi;
 	void __iomem *bridge_base_addr =
@@ -414,8 +415,11 @@ static void mc_handle_msi(struct irq_desc *desc)
 	u32 bit;
 	int ret;
 
+	chained_irq_enter(chip, desc);
+
 	status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
 	if (status & PM_MSI_INT_MSI_MASK) {
+		writel_relaxed(status & PM_MSI_INT_MSI_MASK, bridge_base_addr + ISTATUS_LOCAL);
 		status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
 		for_each_set_bit(bit, &status, msi->num_vectors) {
 			ret = generic_handle_domain_irq(msi->dev_domain, bit);
@@ -424,6 +428,8 @@ static void mc_handle_msi(struct irq_desc *desc)
 						    bit);
 		}
 	}
+
+	chained_irq_exit(chip, desc);
 }
 
 static void mc_msi_bottom_irq_ack(struct irq_data *data)
@@ -432,13 +438,8 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
 	void __iomem *bridge_base_addr =
 		port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
 	u32 bitpos = data->hwirq;
-	unsigned long status;
 
 	writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
-	status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
-	if (!status)
-		writel_relaxed(BIT(PM_MSI_INT_MSI_SHIFT),
-			       bridge_base_addr + ISTATUS_LOCAL);
 }
 
 static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
@@ -563,6 +564,7 @@ static int mc_allocate_msi_domains(struct mc_pcie *port)
 static void mc_handle_intx(struct irq_desc *desc)
 {
 	struct mc_pcie *port = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct device *dev = port->dev;
 	void __iomem *bridge_base_addr =
 		port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
@@ -570,6 +572,8 @@ static void mc_handle_intx(struct irq_desc *desc)
 	u32 bit;
 	int ret;
 
+	chained_irq_enter(chip, desc);
+
 	status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
 	if (status & PM_MSI_INT_INTX_MASK) {
 		status &= PM_MSI_INT_INTX_MASK;
@@ -581,6 +585,8 @@ static void mc_handle_intx(struct irq_desc *desc)
 						    bit);
 		}
 	}
+
+	chained_irq_exit(chip, desc);
 }
 
 static void mc_ack_intx_irq(struct irq_data *data)
@@ -1115,7 +1121,7 @@ static const struct of_device_id mc_pcie_of_match[] = {
 	{},
 };
 
-MODULE_DEVICE_TABLE(of, mc_pcie_of_match)
+MODULE_DEVICE_TABLE(of, mc_pcie_of_match);
 
 static struct platform_driver mc_pcie_driver = {
 	.probe = pci_host_common_probe,
diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 5fb9ce6e536e..d1a200b93b2b 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -264,8 +264,7 @@ static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 	struct rockchip_pcie *pcie = &ep->rockchip;
 	u32 r;
 
-	r = find_first_zero_bit(&ep->ob_region_map,
-				sizeof(ep->ob_region_map) * BITS_PER_LONG);
+	r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG);
 	/*
 	 * Region 0 is reserved for configuration space and shouldn't
 	 * be used elsewhere per TRM, so leave it out.
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index eb05cceab964..94a14a3d7e55 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -6,7 +6,6 @@
 
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/iommu.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -813,8 +812,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	 * acceptable because the guest is usually CPU-limited and MSI
 	 * remapping doesn't become a performance bottleneck.
 	 */
-	if (iommu_capable(vmd->dev->dev.bus, IOMMU_CAP_INTR_REMAP) ||
-	    !(features & VMD_FEAT_CAN_BYPASS_MSI_REMAP) ||
+	if (!(features & VMD_FEAT_CAN_BYPASS_MSI_REMAP) ||
 	    offset[0] || offset[1]) {
 		ret = vmd_alloc_irqs(vmd);
 		if (ret)
@@ -853,6 +851,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	vmd_attach_resources(vmd);
 	if (vmd->irq_domain)
 		dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
+	else
+		dev_set_msi_domain(&vmd->bus->dev,
+				   dev_get_msi_domain(&vmd->dev->dev));
 
 	vmd_acpi_begin();
 
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index f4c2e6e01be0..881d420637bf 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/of_fdt.h>
 
 #include <asm/opal.h>
 #include <asm/pnv-pci.h>
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index e6991ff67526..980bb3afd092 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -15,6 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 9887c9de08c3..491986197c47 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/smp.h>
@@ -20,6 +21,7 @@
 #include <asm/eeh.h>       /* for eeh_add_device() */
 #include <asm/rtas.h>		/* rtas_call */
 #include <asm/pci-bridge.h>	/* for pci_controller */
+#include <asm/prom.h>
 #include "../pci.h"		/* for pci_add_new_bus */
 				/* and pci_do_scan_bus */
 #include "rpaphp.h"
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index c380bdacd146..630f77057c23 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -8,6 +8,7 @@
  * Send feedback to <lxie@us.ibm.com>
  *
  */
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 93b4a945c55d..779eab12e981 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sysfs.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/slab.h>
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index cb2e8351c2cc..6c1b81304665 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -633,3 +633,73 @@ int of_pci_get_max_link_speed(struct device_node *node)
 	return max_link_speed;
 }
 EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
+
+/**
+ * of_pci_get_slot_power_limit - Parses the "slot-power-limit-milliwatt"
+ *				 property.
+ *
+ * @node: device tree node with the slot power limit information
+ * @slot_power_limit_value: pointer where the value should be stored in PCIe
+ *			    Slot Capabilities Register format
+ * @slot_power_limit_scale: pointer where the scale should be stored in PCIe
+ *			    Slot Capabilities Register format
+ *
+ * Returns the slot power limit in milliwatts and if @slot_power_limit_value
+ * and @slot_power_limit_scale pointers are non-NULL, fills in the value and
+ * scale in format used by PCIe Slot Capabilities Register.
+ *
+ * If the property is not found or is invalid, returns 0.
+ */
+u32 of_pci_get_slot_power_limit(struct device_node *node,
+				u8 *slot_power_limit_value,
+				u8 *slot_power_limit_scale)
+{
+	u32 slot_power_limit_mw;
+	u8 value, scale;
+
+	if (of_property_read_u32(node, "slot-power-limit-milliwatt",
+				 &slot_power_limit_mw))
+		slot_power_limit_mw = 0;
+
+	/* Calculate Slot Power Limit Value and Slot Power Limit Scale */
+	if (slot_power_limit_mw == 0) {
+		value = 0x00;
+		scale = 0;
+	} else if (slot_power_limit_mw <= 255) {
+		value = slot_power_limit_mw;
+		scale = 3;
+	} else if (slot_power_limit_mw <= 255*10) {
+		value = slot_power_limit_mw / 10;
+		scale = 2;
+		slot_power_limit_mw = slot_power_limit_mw / 10 * 10;
+	} else if (slot_power_limit_mw <= 255*100) {
+		value = slot_power_limit_mw / 100;
+		scale = 1;
+		slot_power_limit_mw = slot_power_limit_mw / 100 * 100;
+	} else if (slot_power_limit_mw <= 239*1000) {
+		value = slot_power_limit_mw / 1000;
+		scale = 0;
+		slot_power_limit_mw = slot_power_limit_mw / 1000 * 1000;
+	} else if (slot_power_limit_mw < 250*1000) {
+		value = 0xEF;
+		scale = 0;
+		slot_power_limit_mw = 239*1000;
+	} else if (slot_power_limit_mw <= 600*1000) {
+		value = 0xF0 + (slot_power_limit_mw / 1000 - 250) / 25;
+		scale = 0;
+		slot_power_limit_mw = slot_power_limit_mw / (1000*25) * (1000*25);
+	} else {
+		value = 0xFE;
+		scale = 0;
+		slot_power_limit_mw = 600*1000;
+	}
+
+	if (slot_power_limit_value)
+		*slot_power_limit_value = value;
+
+	if (slot_power_limit_scale)
+		*slot_power_limit_scale = scale;
+
+	return slot_power_limit_mw;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index 30b1df3c9d2f..462b429ad243 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -326,15 +326,16 @@ static const struct pci_p2pdma_whitelist_entry {
 };
 
 /*
- * This lookup function tries to find the PCI device corresponding to a given
- * host bridge.
+ * If the first device on host's root bus is either devfn 00.0 or a PCIe
+ * Root Port, return it.  Otherwise return NULL.
  *
- * It assumes the host bridge device is the first PCI device in the
- * bus->devices list and that the devfn is 00.0. These assumptions should hold
- * for all the devices in the whitelist above.
+ * We often use a devfn 00.0 "host bridge" in the pci_p2pdma_whitelist[]
+ * (though there is no PCI/PCIe requirement for such a device).  On some
+ * platforms, e.g., Intel Skylake, there is no such host bridge device, and
+ * pci_p2pdma_whitelist[] may contain a Root Port at any devfn.
  *
- * This function is equivalent to pci_get_slot(host->bus, 0), however it does
- * not take the pci_bus_sem lock seeing __host_bridge_whitelist() must not
+ * This function is similar to pci_get_slot(host->bus, 0), but it does
+ * not take the pci_bus_sem lock since __host_bridge_whitelist() must not
  * sleep.
  *
  * For this to be safe, the caller should hold a reference to a device on the
@@ -350,10 +351,14 @@ static struct pci_dev *pci_host_bridge_dev(struct pci_host_bridge *host)
 
 	if (!root)
 		return NULL;
-	if (root->devfn != PCI_DEVFN(0, 0))
-		return NULL;
 
-	return root;
+	if (root->devfn == PCI_DEVFN(0, 0))
+		return root;
+
+	if (pci_pcie_type(root) == PCI_EXP_TYPE_ROOT_PORT)
+		return root;
+
+	return NULL;
 }
 
 static bool __host_bridge_whitelist(struct pci_host_bridge *host,
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 3787876ecb24..3760d85c10d2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -974,9 +974,11 @@ bool acpi_pci_power_manageable(struct pci_dev *dev)
 
 bool acpi_pci_bridge_d3(struct pci_dev *dev)
 {
-	const union acpi_object *obj;
-	struct acpi_device *adev;
 	struct pci_dev *rpdev;
+	struct acpi_device *adev;
+	acpi_status status;
+	unsigned long long state;
+	const union acpi_object *obj;
 
 	if (acpi_pci_disabled || !dev->is_hotplug_bridge)
 		return false;
@@ -985,12 +987,6 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (acpi_pci_power_manageable(dev))
 		return true;
 
-	/*
-	 * The ACPI firmware will provide the device-specific properties through
-	 * _DSD configuration object. Look for the 'HotPlugSupportInD3' property
-	 * for the root port and if it is set we know the hierarchy behind it
-	 * supports D3 just fine.
-	 */
 	rpdev = pcie_find_root_port(dev);
 	if (!rpdev)
 		return false;
@@ -999,11 +995,34 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (!adev)
 		return false;
 
-	if (acpi_dev_get_property(adev, "HotPlugSupportInD3",
-				   ACPI_TYPE_INTEGER, &obj) < 0)
+	/*
+	 * If the Root Port cannot signal wakeup signals at all, i.e., it
+	 * doesn't supply a wakeup GPE via _PRW, it cannot signal hotplug
+	 * events from low-power states including D3hot and D3cold.
+	 */
+	if (!adev->wakeup.flags.valid)
 		return false;
 
-	return obj->integer.value == 1;
+	/*
+	 * If the Root Port cannot wake itself from D3hot or D3cold, we
+	 * can't use D3.
+	 */
+	status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state);
+	if (ACPI_SUCCESS(status) && state < ACPI_STATE_D3_HOT)
+		return false;
+
+	/*
+	 * The "HotPlugSupportInD3" property in a Root Port _DSD indicates
+	 * the Port can signal hotplug events while in D3.  We assume any
+	 * bridges *below* that Root Port can also signal hotplug events
+	 * while in D3.
+	 */
+	if (!acpi_dev_get_property(adev, "HotPlugSupportInD3",
+				   ACPI_TYPE_INTEGER, &obj) &&
+	    obj->integer.value == 1)
+		return true;
+
+	return false;
 }
 
 int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 4ceeb75fc899..2f3b69adfc9e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -522,9 +522,9 @@ static void pci_device_shutdown(struct device *dev)
 		pci_clear_master(pci_dev);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 
-/* Auxiliary functions used for system resume and run-time resume. */
+/* Auxiliary functions used for system resume */
 
 /**
  * pci_restore_standard_config - restore standard config registers of PCI device
@@ -544,6 +544,11 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev)
 	pci_pme_restore(pci_dev);
 	return 0;
 }
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+
+/* Auxiliary functions used for system resume and run-time resume */
 
 static void pci_pm_default_resume(struct pci_dev *pci_dev)
 {
@@ -551,18 +556,34 @@ static void pci_pm_default_resume(struct pci_dev *pci_dev)
 	pci_enable_wake(pci_dev, PCI_D0, false);
 }
 
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-
-static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+static void pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev)
 {
 	pci_power_up(pci_dev);
 	pci_update_current_state(pci_dev, PCI_D0);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+	pci_pm_power_up_and_verify_state(pci_dev);
 	pci_restore_state(pci_dev);
 	pci_pme_restore(pci_dev);
 }
 
+static void pci_pm_bridge_power_up_actions(struct pci_dev *pci_dev)
+{
+	pci_bridge_wait_for_secondary_bus(pci_dev);
+	/*
+	 * When powering on a bridge from D3cold, the whole hierarchy may be
+	 * powered on into D0uninitialized state, resume them to give them a
+	 * chance to suspend again
+	 */
+	pci_resume_bus(pci_dev->subordinate);
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+
 /*
  * Default "suspend" method for devices that have no driver provided suspend,
  * or not even a driver at all (second part).
@@ -934,7 +955,7 @@ static int pci_pm_resume_noirq(struct device *dev)
 	pcie_pme_root_status_cleanup(pci_dev);
 
 	if (!skip_bus_pm && prev_state == PCI_D3cold)
-		pci_bridge_wait_for_secondary_bus(pci_dev);
+		pci_pm_bridge_power_up_actions(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return 0;
@@ -1068,7 +1089,7 @@ static int pci_pm_thaw_noirq(struct device *dev)
 	 * in case the driver's "freeze" callbacks put it into a low-power
 	 * state.
 	 */
-	pci_set_power_state(pci_dev, PCI_D0);
+	pci_pm_power_up_and_verify_state(pci_dev);
 	pci_restore_state(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
@@ -1312,7 +1333,7 @@ static int pci_pm_runtime_resume(struct device *dev)
 	 * to a driver because although we left it in D0, it may have gone to
 	 * D3cold when the bridge above it runtime suspended.
 	 */
-	pci_restore_standard_config(pci_dev);
+	pci_pm_default_resume_early(pci_dev);
 
 	if (!pci_dev->driver)
 		return 0;
@@ -1321,13 +1342,11 @@ static int pci_pm_runtime_resume(struct device *dev)
 	pci_pm_default_resume(pci_dev);
 
 	if (prev_state == PCI_D3cold)
-		pci_bridge_wait_for_secondary_bus(pci_dev);
+		pci_pm_bridge_power_up_actions(pci_dev);
 
 	if (pm && pm->runtime_resume)
 		error = pm->runtime_resume(dev);
 
-	pci_dev->runtime_d3cold = false;
-
 	return error;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d25122fbe98a..876182873468 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1068,126 +1068,6 @@ static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
 }
 
 /**
- * pci_raw_set_power_state - Use PCI PM registers to set the power state of
- *			     given PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if device already is in the requested state.
- * 0 if device's power state has been successfully changed.
- */
-static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
-{
-	u16 pmcsr;
-	bool need_restore = false;
-
-	/* Check if we're already there */
-	if (dev->current_state == state)
-		return 0;
-
-	if (!dev->pm_cap)
-		return -EIO;
-
-	if (state < PCI_D0 || state > PCI_D3hot)
-		return -EINVAL;
-
-	/*
-	 * Validate transition: We can enter D0 from any state, but if
-	 * we're already in a low-power state, we can only go deeper.  E.g.,
-	 * we can go from D1 to D3, but we can't go directly from D3 to D1;
-	 * we'd have to go from D3 to D0, then to D1.
-	 */
-	if (state != PCI_D0 && dev->current_state <= PCI_D3cold
-	    && dev->current_state > state) {
-		pci_err(dev, "invalid power transition (from %s to %s)\n",
-			pci_power_name(dev->current_state),
-			pci_power_name(state));
-		return -EINVAL;
-	}
-
-	/* Check if this device supports the desired state */
-	if ((state == PCI_D1 && !dev->d1_support)
-	   || (state == PCI_D2 && !dev->d2_support))
-		return -EIO;
-
-	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-	if (PCI_POSSIBLE_ERROR(pmcsr)) {
-		pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n",
-			pci_power_name(dev->current_state),
-			pci_power_name(state));
-		return -EIO;
-	}
-
-	/*
-	 * If we're (effectively) in D3, force entire word to 0.
-	 * This doesn't affect PME_Status, disables PME_En, and
-	 * sets PowerState to 0.
-	 */
-	switch (dev->current_state) {
-	case PCI_D0:
-	case PCI_D1:
-	case PCI_D2:
-		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
-		pmcsr |= state;
-		break;
-	case PCI_D3hot:
-	case PCI_D3cold:
-	case PCI_UNKNOWN: /* Boot-up */
-		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
-			need_restore = true;
-		fallthrough;	/* force to D0 */
-	default:
-		pmcsr = 0;
-		break;
-	}
-
-	/* Enter specified state */
-	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
-
-	/*
-	 * Mandatory power management transition delays; see PCI PM 1.1
-	 * 5.6.1 table 18
-	 */
-	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-		pci_dev_d3_sleep(dev);
-	else if (state == PCI_D2 || dev->current_state == PCI_D2)
-		udelay(PCI_PM_D2_DELAY);
-
-	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-	dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
-	if (dev->current_state != state)
-		pci_info_ratelimited(dev, "refused to change power state from %s to %s\n",
-			 pci_power_name(dev->current_state),
-			 pci_power_name(state));
-
-	/*
-	 * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
-	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
-	 * from D3hot to D0 _may_ perform an internal reset, thereby
-	 * going to "D0 Uninitialized" rather than "D0 Initialized".
-	 * For example, at least some versions of the 3c905B and the
-	 * 3c556B exhibit this behaviour.
-	 *
-	 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
-	 * devices in a D3hot state at boot.  Consequently, we need to
-	 * restore at least the BARs so that the device will be
-	 * accessible to its driver.
-	 */
-	if (need_restore)
-		pci_restore_bars(dev);
-
-	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
-
-	return 0;
-}
-
-/**
  * pci_update_current_state - Read power state of given device and cache it
  * @dev: PCI device to handle.
  * @state: State to cache in case the device doesn't have the PM capability
@@ -1201,14 +1081,17 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
  */
 void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 {
-	if (platform_pci_get_power_state(dev) == PCI_D3cold ||
-	    !pci_device_is_present(dev)) {
+	if (platform_pci_get_power_state(dev) == PCI_D3cold) {
 		dev->current_state = PCI_D3cold;
 	} else if (dev->pm_cap) {
 		u16 pmcsr;
 
 		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+		if (PCI_POSSIBLE_ERROR(pmcsr)) {
+			dev->current_state = PCI_D3cold;
+			return;
+		}
+		dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK;
 	} else {
 		dev->current_state = state;
 	}
@@ -1306,26 +1189,114 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 /**
  * pci_power_up - Put the given device into D0
  * @dev: PCI device to power up
+ *
+ * On success, return 0 or 1, depending on whether or not it is necessary to
+ * restore the device's BARs subsequently (1 is returned in that case).
  */
 int pci_power_up(struct pci_dev *dev)
 {
-	pci_platform_power_transition(dev, PCI_D0);
+	bool need_restore;
+	pci_power_t state;
+	u16 pmcsr;
+
+	platform_pci_set_power_state(dev, PCI_D0);
+
+	if (!dev->pm_cap) {
+		state = platform_pci_get_power_state(dev);
+		if (state == PCI_UNKNOWN)
+			dev->current_state = PCI_D0;
+		else
+			dev->current_state = state;
+
+		if (state == PCI_D0)
+			return 0;
+
+		return -EIO;
+	}
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	if (PCI_POSSIBLE_ERROR(pmcsr)) {
+		pci_err(dev, "Unable to change power state from %s to D0, device inaccessible\n",
+			pci_power_name(dev->current_state));
+		dev->current_state = PCI_D3cold;
+		return -EIO;
+	}
+
+	state = pmcsr & PCI_PM_CTRL_STATE_MASK;
+
+	need_restore = (state == PCI_D3hot || dev->current_state >= PCI_D3hot) &&
+			!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET);
+
+	if (state == PCI_D0)
+		goto end;
 
 	/*
-	 * Mandatory power management transition delays are handled in
-	 * pci_pm_resume_noirq() and pci_pm_runtime_resume() of the
-	 * corresponding bridge.
+	 * Force the entire word to 0. This doesn't affect PME_Status, disables
+	 * PME_En, and sets PowerState to 0.
 	 */
-	if (dev->runtime_d3cold) {
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, 0);
+
+	/* Mandatory transition delays; see PCI PM 1.2. */
+	if (state == PCI_D3hot)
+		pci_dev_d3_sleep(dev);
+	else if (state == PCI_D2)
+		udelay(PCI_PM_D2_DELAY);
+
+end:
+	dev->current_state = PCI_D0;
+	if (need_restore)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * pci_set_full_power_state - Put a PCI device into D0 and update its state
+ * @dev: PCI device to power up
+ *
+ * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
+ * to confirm the state change, restore its BARs if they might be lost and
+ * reconfigure ASPM in acordance with the new power state.
+ *
+ * If pci_restore_state() is going to be called right after a power state change
+ * to D0, it is more efficient to use pci_power_up() directly instead of this
+ * function.
+ */
+static int pci_set_full_power_state(struct pci_dev *dev)
+{
+	u16 pmcsr;
+	int ret;
+
+	ret = pci_power_up(dev);
+	if (ret < 0)
+		return ret;
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK;
+	if (dev->current_state != PCI_D0) {
+		pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n",
+				     pci_power_name(dev->current_state));
+	} else if (ret > 0) {
 		/*
-		 * When powering on a bridge from D3cold, the whole hierarchy
-		 * may be powered on into D0uninitialized state, resume them to
-		 * give them a chance to suspend again
+		 * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+		 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
+		 * from D3hot to D0 _may_ perform an internal reset, thereby
+		 * going to "D0 Uninitialized" rather than "D0 Initialized".
+		 * For example, at least some versions of the 3c905B and the
+		 * 3c556B exhibit this behaviour.
+		 *
+		 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
+		 * devices in a D3hot state at boot.  Consequently, we need to
+		 * restore at least the BARs so that the device will be
+		 * accessible to its driver.
 		 */
-		pci_resume_bus(dev->subordinate);
+		pci_restore_bars(dev);
 	}
 
-	return pci_raw_set_power_state(dev, PCI_D0);
+	if (dev->bus->self)
+		pcie_aspm_pm_state_change(dev->bus->self);
+
+	return 0;
 }
 
 /**
@@ -1353,6 +1324,79 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
 }
 
 /**
+ * pci_set_low_power_state - Put a PCI device into a low-power state.
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D1, D2, D3hot) to put the device into.
+ *
+ * Use the device's PCI_PM_CTRL register to put it into a low-power state.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	u16 pmcsr;
+
+	if (!dev->pm_cap)
+		return -EIO;
+
+	/*
+	 * Validate transition: We can enter D0 from any state, but if
+	 * we're already in a low-power state, we can only go deeper.  E.g.,
+	 * we can go from D1 to D3, but we can't go directly from D3 to D1;
+	 * we'd have to go from D3 to D0, then to D1.
+	 */
+	if (dev->current_state <= PCI_D3cold && dev->current_state > state) {
+		pci_dbg(dev, "Invalid power transition (from %s to %s)\n",
+			pci_power_name(dev->current_state),
+			pci_power_name(state));
+		return -EINVAL;
+	}
+
+	/* Check if this device supports the desired state */
+	if ((state == PCI_D1 && !dev->d1_support)
+	   || (state == PCI_D2 && !dev->d2_support))
+		return -EIO;
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	if (PCI_POSSIBLE_ERROR(pmcsr)) {
+		pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n",
+			pci_power_name(dev->current_state),
+			pci_power_name(state));
+		dev->current_state = PCI_D3cold;
+		return -EIO;
+	}
+
+	pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+	pmcsr |= state;
+
+	/* Enter specified state */
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+
+	/* Mandatory power management transition delays; see PCI PM 1.2. */
+	if (state == PCI_D3hot)
+		pci_dev_d3_sleep(dev);
+	else if (state == PCI_D2)
+		udelay(PCI_PM_D2_DELAY);
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK;
+	if (dev->current_state != state)
+		pci_info_ratelimited(dev, "Refused to change power state from %s to %s\n",
+				     pci_power_name(dev->current_state),
+				     pci_power_name(state));
+
+	if (dev->bus->self)
+		pcie_aspm_pm_state_change(dev->bus->self);
+
+	return 0;
+}
+
+/**
  * pci_set_power_state - Set the power state of a PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
@@ -1393,7 +1437,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return 0;
 
 	if (state == PCI_D0)
-		return pci_power_up(dev);
+		return pci_set_full_power_state(dev);
 
 	/*
 	 * This device is quirked not to be put into D3, so don't put it in
@@ -1402,19 +1446,25 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	/*
-	 * To put device in D3cold, we put device into D3hot in native
-	 * way, then put device into D3cold with platform ops
-	 */
-	error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
-					PCI_D3hot : state);
+	if (state == PCI_D3cold) {
+		/*
+		 * To put the device in D3cold, put it into D3hot in the native
+		 * way, then put it into D3cold using platform ops.
+		 */
+		error = pci_set_low_power_state(dev, PCI_D3hot);
+
+		if (pci_platform_power_transition(dev, PCI_D3cold))
+			return error;
 
-	if (pci_platform_power_transition(dev, state))
-		return error;
+		/* Powering off a bridge may power off the whole hierarchy */
+		if (dev->current_state == PCI_D3cold)
+			pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+	} else {
+		error = pci_set_low_power_state(dev, state);
 
-	/* Powering off a bridge may power off the whole hierarchy */
-	if (state == PCI_D3cold)
-		pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+		if (pci_platform_power_transition(dev, state))
+			return error;
+	}
 
 	return 0;
 }
@@ -2718,8 +2768,6 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
-	dev->runtime_d3cold = target_state == PCI_D3cold;
-
 	/*
 	 * There are systems (for example, Intel mobile chips since Coffee
 	 * Lake) where the power drawn while suspended can be significantly
@@ -2737,7 +2785,6 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
 	if (error) {
 		pci_enable_wake(dev, target_state, false);
 		pci_restore_ptm_state(dev);
-		dev->runtime_d3cold = false;
 	}
 
 	return error;
@@ -5113,19 +5160,19 @@ static int pci_reset_bus_function(struct pci_dev *dev, bool probe)
 
 void pci_dev_lock(struct pci_dev *dev)
 {
-	pci_cfg_access_lock(dev);
 	/* block PM suspend, driver probe, etc. */
 	device_lock(&dev->dev);
+	pci_cfg_access_lock(dev);
 }
 EXPORT_SYMBOL_GPL(pci_dev_lock);
 
 /* Return 1 on successful lock, 0 on contention */
 int pci_dev_trylock(struct pci_dev *dev)
 {
-	if (pci_cfg_access_trylock(dev)) {
-		if (device_trylock(&dev->dev))
+	if (device_trylock(&dev->dev)) {
+		if (pci_cfg_access_trylock(dev))
 			return 1;
-		pci_cfg_access_unlock(dev);
+		device_unlock(&dev->dev);
 	}
 
 	return 0;
@@ -5134,8 +5181,8 @@ EXPORT_SYMBOL_GPL(pci_dev_trylock);
 
 void pci_dev_unlock(struct pci_dev *dev)
 {
-	device_unlock(&dev->dev);
 	pci_cfg_access_unlock(dev);
+	device_unlock(&dev->dev);
 }
 EXPORT_SYMBOL_GPL(pci_dev_unlock);
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3d60cabde1a1..e10cdec6c56e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -627,6 +627,9 @@ struct device_node;
 int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
 int of_get_pci_domain_nr(struct device_node *node);
 int of_pci_get_max_link_speed(struct device_node *node);
+u32 of_pci_get_slot_power_limit(struct device_node *node,
+				u8 *slot_power_limit_value,
+				u8 *slot_power_limit_scale);
 void pci_set_of_node(struct pci_dev *dev);
 void pci_release_of_node(struct pci_dev *dev);
 void pci_set_bus_of_node(struct pci_bus *bus);
@@ -653,6 +656,18 @@ of_pci_get_max_link_speed(struct device_node *node)
 	return -EINVAL;
 }
 
+static inline u32
+of_pci_get_slot_power_limit(struct device_node *node,
+			    u8 *slot_power_limit_value,
+			    u8 *slot_power_limit_scale)
+{
+	if (slot_power_limit_value)
+		*slot_power_limit_value = 0;
+	if (slot_power_limit_scale)
+		*slot_power_limit_scale = 0;
+	return 0;
+}
+
 static inline void pci_set_of_node(struct pci_dev *dev) { }
 static inline void pci_release_of_node(struct pci_dev *dev) { }
 static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9fa1f97e5b27..7952e5efd6cf 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -101,6 +101,11 @@ struct aer_stats {
 #define ERR_COR_ID(d)			(d & 0xffff)
 #define ERR_UNCOR_ID(d)			(d >> 16)
 
+#define AER_ERR_STATUS_MASK		(PCI_ERR_ROOT_UNCOR_RCV |	\
+					PCI_ERR_ROOT_COR_RCV |		\
+					PCI_ERR_ROOT_MULTI_COR_RCV |	\
+					PCI_ERR_ROOT_MULTI_UNCOR_RCV)
+
 static int pcie_aer_disable;
 static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
 
@@ -1196,7 +1201,7 @@ static irqreturn_t aer_irq(int irq, void *context)
 	struct aer_err_source e_src = {};
 
 	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_STATUS, &e_src.status);
-	if (!(e_src.status & (PCI_ERR_ROOT_UNCOR_RCV|PCI_ERR_ROOT_COR_RCV)))
+	if (!(e_src.status & AER_ERR_STATUS_MASK))
 		return IRQ_NONE;
 
 	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_ERR_SRC, &e_src.id);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index da829274fc66..41aeaa235132 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -12,6 +12,7 @@
  * file, where their drivers can use them.
  */
 
+#include <linux/bitfield.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
@@ -5895,3 +5896,49 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1533, rom_bar_overlap_defect);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1536, rom_bar_overlap_defect);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1537, rom_bar_overlap_defect);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1538, rom_bar_overlap_defect);
+
+#ifdef CONFIG_PCIEASPM
+/*
+ * Several Intel DG2 graphics devices advertise that they can only tolerate
+ * 1us latency when transitioning from L1 to L0, which may prevent ASPM L1
+ * from being enabled.  But in fact these devices can tolerate unlimited
+ * latency.  Override their Device Capabilities value to allow ASPM L1 to
+ * be enabled.
+ */
+static void aspm_l1_acceptable_latency(struct pci_dev *dev)
+{
+	u32 l1_lat = FIELD_GET(PCI_EXP_DEVCAP_L1, dev->devcap);
+
+	if (l1_lat < 7) {
+		dev->devcap |= FIELD_PREP(PCI_EXP_DEVCAP_L1, 7);
+		pci_info(dev, "ASPM: overriding L1 acceptable latency from %#x to 0x7\n",
+			 l1_lat);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f80, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f81, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f82, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f83, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f84, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f85, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f86, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f87, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f88, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5690, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5691, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5692, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5693, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5694, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5695, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a1, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a2, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a3, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a4, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a5, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a6, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b1, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c1, aspm_l1_acceptable_latency);
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 60adf42460ab..3266ac08f8ec 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -379,10 +379,6 @@ struct pci_dev {
 	unsigned int	mmio_always_on:1;	/* Disallow turning off io/mem
 						   decoding during BAR sizing */
 	unsigned int	wakeup_prepared:1;
-	unsigned int	runtime_d3cold:1;	/* Whether go through runtime
-						   D3cold, not set for devices
-						   powered on/off by the
-						   corresponding bridge */
 	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
 	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
 	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index bee1a9ed6e66..108f8523fa04 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -616,6 +616,7 @@
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_ASPL_DISABLE	0x2000 /* Auto Slot Power Limit Disable */
 #define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		0x1a	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */