diff options
| author |   Stephen Hemminger <shemminger@linux-foundation.org> | 2007-11-05 15:52:11 -0800 |
|---|---|---|
| committer |   Jeff Garzik <jeff@garzik.org> | 2007-11-10 04:25:08 -0500 |
| commit | 44388c7ead4b2bae9f82bc0862475640c50f357d (patch) | |
| tree | f40fae29bfec10ca398c7ba7a5f03514110ac4a2 | |
| parent | sky2: longer PHY delay (diff) | |
| download | linux-dev-44388c7ead4b2bae9f82bc0862475640c50f357d.tar.xz linux-dev-44388c7ead4b2bae9f82bc0862475640c50f357d.zip | |
sky2: dont change LED after autoneg
Don't need to change LED's after auto negotiation, the chip
sets them correctly.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
| -rw-r--r-- | drivers/net/sky2.c | 23 |
1 files changed, 0 insertions, 23 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eaab3d87dcf3..3c08db41cec4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1820,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->flags & SKY2_HW_NEWER_PHY) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ - - switch(sky2->speed) { - case SPEED_10: - led |= PHY_M_LEDC_INIT_CTRL(7); - break; - - case SPEED_100: - led |= PHY_M_LEDC_STA1_CTRL(7); - break; - - case SPEED_1000: - led |= PHY_M_LEDC_STA0_CTRL(7); - break; - } - - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } - if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", |