Merge branch 'cxgb4-next'

Anish Bhatt says:

====================
cxgb4 : Add DCBx support to Chelsio cxgb4 driver

This patchset adds support for DCBx via dcbnl_ops to the cxgb4
driver. This should enable cxgb4 to work with open-lldp and the
like. The last patch only updates copyright year.

v2 : move inclusion of struct port_dcb_info to the same patch as where it is defined.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

15 files changed, 1492 insertions, 44 deletions

diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
index 570222c33410..c3ce9df0041a 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -86,6 +86,17 @@ config CHELSIO_T4
 	  To compile this driver as a module choose M here; the module
 	  will be called cxgb4.
 
+config CHELSIO_T4_DCB
+	bool "Data Center Bridging (DCB) Support for Chelsio T4/T5 cards"
+	default n
+	depends on CHELSIO_T4 && DCB
+	---help---
+	  Enable DCB support through rtNetlink interface.
+	  Say Y here if you want to enable Data Center Bridging (DCB) support
+	  in the driver.
+
+	  If unsure, say N.
+
 config CHELSIO_T4VF
 	tristate "Chelsio Communications T4/T5 Virtual Function Ethernet support"
 	depends on PCI
diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile
index 498667487f52..1df65c915b99 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_CHELSIO_T4) += cxgb4.o
 
 cxgb4-objs := cxgb4_main.o l2t.o t4_hw.o sge.o
+cxgb4-$(CONFIG_CHELSIO_T4_DCB) +=  cxgb4_dcb.o
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index f503dce4ab17..7b5425c9c0fb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -373,6 +373,8 @@ enum {
 struct adapter;
 struct sge_rspq;
 
+#include "cxgb4_dcb.h"
+
 struct port_info {
 	struct adapter *adapter;
 	u16    viid;
@@ -389,6 +391,9 @@ struct port_info {
 	u8     rss_mode;
 	struct link_config link_cfg;
 	u16   *rss;
+#ifdef CONFIG_CHELSIO_T4_DCB
+	struct port_dcb_info dcb;     /* Data Center Bridging support */
+#endif
 };
 
 struct dentry;
@@ -1007,6 +1012,10 @@ int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
 		  unsigned int vf, unsigned int nparams, const u32 *params,
 		  const u32 *val);
+int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox,
+			  unsigned int pf, unsigned int vf,
+			  unsigned int nparams, const u32 *params,
+			  const u32 *val);
 int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
 		unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
 		unsigned int rxqi, unsigned int rxq, unsigned int tc,
@@ -1025,6 +1034,8 @@ int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
 		  int idx, const u8 *addr, bool persist, bool add_smt);
 int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
 		     bool ucast, u64 vec, bool sleep_ok);
+int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
+			unsigned int viid, bool rx_en, bool tx_en, bool dcb_en);
 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
 		 bool rx_en, bool tx_en);
 int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
new file mode 100644
index 000000000000..39b4a85fceae
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -0,0 +1,980 @@
+/*
+ *  Copyright (C) 2013-2014 Chelsio Communications.  All rights reserved.
+ *
+ *  Written by Anish Bhatt (anish@chelsio.com)
+ *	       Casey Leedom (leedom@chelsio.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  The full GNU General Public License is included in this distribution in
+ *  the file called "COPYING".
+ *
+ */
+
+#include "cxgb4.h"
+
+/* Initialize a port's Data Center Bridging state.  Typically used after a
+ * Link Down event.
+ */
+void cxgb4_dcb_state_init(struct net_device *dev)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct port_dcb_info *dcb = &pi->dcb;
+
+	memset(dcb, 0, sizeof(struct port_dcb_info));
+	dcb->state = CXGB4_DCB_STATE_START;
+}
+
+/* Finite State machine for Data Center Bridging.
+ */
+void cxgb4_dcb_state_fsm(struct net_device *dev,
+			 enum cxgb4_dcb_state_input input)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct port_dcb_info *dcb = &pi->dcb;
+	struct adapter *adap = pi->adapter;
+
+	switch (input) {
+	case CXGB4_DCB_INPUT_FW_DISABLED: {
+		/* Firmware tells us it's not doing DCB */
+		switch (dcb->state) {
+		case CXGB4_DCB_STATE_START: {
+			/* we're going to use Host DCB */
+			dcb->state = CXGB4_DCB_STATE_HOST;
+			dcb->supported = CXGB4_DCBX_HOST_SUPPORT;
+			dcb->enabled = 1;
+			break;
+		}
+
+		case CXGB4_DCB_STATE_HOST: {
+			/* we're alreaady in Host DCB mode */
+			break;
+		}
+
+		default:
+			goto bad_state_transition;
+		}
+		break;
+	}
+
+	case CXGB4_DCB_INPUT_FW_ENABLED: {
+		/* Firmware tells us that it is doing DCB */
+		switch (dcb->state) {
+		case CXGB4_DCB_STATE_START: {
+			/* we're going to use Firmware DCB */
+			dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
+			dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+			break;
+		}
+
+		case CXGB4_DCB_STATE_FW_INCOMPLETE:
+		case CXGB4_DCB_STATE_FW_ALLSYNCED: {
+			/* we're alreaady in firmware DCB mode */
+			break;
+		}
+
+		default:
+			goto bad_state_transition;
+		}
+		break;
+	}
+
+	case CXGB4_DCB_INPUT_FW_INCOMPLETE: {
+		/* Firmware tells us that its DCB state is incomplete */
+		switch (dcb->state) {
+		case CXGB4_DCB_STATE_FW_INCOMPLETE: {
+			/* we're already incomplete */
+			break;
+		}
+
+		case CXGB4_DCB_STATE_FW_ALLSYNCED: {
+			/* We were successfully running with firmware DCB but
+			 * now it's telling us that it's in an "incomplete
+			 * state.  We need to reset back to a ground state
+			 * of incomplete.
+			 */
+			cxgb4_dcb_state_init(dev);
+			dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
+			dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+			linkwatch_fire_event(dev);
+			break;
+		}
+
+		default:
+			goto bad_state_transition;
+		}
+		break;
+	}
+
+	case CXGB4_DCB_INPUT_FW_ALLSYNCED: {
+		/* Firmware tells us that its DCB state is complete */
+		switch (dcb->state) {
+		case CXGB4_DCB_STATE_FW_INCOMPLETE: {
+			dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED;
+			dcb->enabled = 1;
+			linkwatch_fire_event(dev);
+			break;
+		}
+
+		case CXGB4_DCB_STATE_FW_ALLSYNCED: {
+			/* we're already all sync'ed */
+			break;
+		}
+
+		default:
+			goto bad_state_transition;
+		}
+		break;
+	}
+
+	default:
+		goto  bad_state_input;
+	}
+	return;
+
+bad_state_input:
+	dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: illegal input symbol %d\n",
+		input);
+	return;
+
+bad_state_transition:
+	dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: bad state transition, state = %d, input = %d\n",
+		dcb->state, input);
+}
+
+/* Handle a DCB/DCBX update message from the firmware.
+ */
+void cxgb4_dcb_handle_fw_update(struct adapter *adap,
+				const struct fw_port_cmd *pcmd)
+{
+	const union fw_port_dcb *fwdcb = &pcmd->u.dcb;
+	int port = FW_PORT_CMD_PORTID_GET(be32_to_cpu(pcmd->op_to_portid));
+	struct net_device *dev = adap->port[port];
+	struct port_info *pi = netdev_priv(dev);
+	struct port_dcb_info *dcb = &pi->dcb;
+	int dcb_type = pcmd->u.dcb.pgid.type;
+
+	/* Handle Firmware DCB Control messages separately since they drive
+	 * our state machine.
+	 */
+	if (dcb_type == FW_PORT_DCB_TYPE_CONTROL) {
+		enum cxgb4_dcb_state_input input =
+			((pcmd->u.dcb.control.all_syncd_pkd &
+			  FW_PORT_CMD_ALL_SYNCD)
+			 ? CXGB4_DCB_STATE_FW_ALLSYNCED
+			 : CXGB4_DCB_STATE_FW_INCOMPLETE);
+
+		cxgb4_dcb_state_fsm(dev, input);
+		return;
+	}
+
+	/* It's weird, and almost certainly an error, to get Firmware DCB
+	 * messages when we either haven't been told whether we're going to be
+	 * doing Host or Firmware DCB; and even worse when we've been told
+	 * that we're doing Host DCB!
+	 */
+	if (dcb->state == CXGB4_DCB_STATE_START ||
+	    dcb->state == CXGB4_DCB_STATE_HOST) {
+		dev_err(adap->pdev_dev, "Receiving Firmware DCB messages in State %d\n",
+			dcb->state);
+		return;
+	}
+
+	/* Now handle the general Firmware DCB update messages ...
+	 */
+	switch (dcb_type) {
+	case FW_PORT_DCB_TYPE_PGID:
+		dcb->pgid = be32_to_cpu(fwdcb->pgid.pgid);
+		dcb->msgs |= CXGB4_DCB_FW_PGID;
+		break;
+
+	case FW_PORT_DCB_TYPE_PGRATE:
+		dcb->pg_num_tcs_supported = fwdcb->pgrate.num_tcs_supported;
+		memcpy(dcb->pgrate, &fwdcb->pgrate.pgrate,
+		       sizeof(dcb->pgrate));
+		dcb->msgs |= CXGB4_DCB_FW_PGRATE;
+		break;
+
+	case FW_PORT_DCB_TYPE_PRIORATE:
+		memcpy(dcb->priorate, &fwdcb->priorate.strict_priorate,
+		       sizeof(dcb->priorate));
+		dcb->msgs |= CXGB4_DCB_FW_PRIORATE;
+		break;
+
+	case FW_PORT_DCB_TYPE_PFC:
+		dcb->pfcen = fwdcb->pfc.pfcen;
+		dcb->pfc_num_tcs_supported = fwdcb->pfc.max_pfc_tcs;
+		dcb->msgs |= CXGB4_DCB_FW_PFC;
+		break;
+
+	case FW_PORT_DCB_TYPE_APP_ID: {
+		const struct fw_port_app_priority *fwap = &fwdcb->app_priority;
+		int idx = fwap->idx;
+		struct app_priority *ap = &dcb->app_priority[idx];
+
+		struct dcb_app app = {
+			.selector = fwap->sel_field,
+			.protocol = be16_to_cpu(fwap->protocolid),
+			.priority = fwap->user_prio_map,
+		};
+		int err;
+
+		err = dcb_setapp(dev, &app);
+		if (err)
+			dev_err(adap->pdev_dev,
+				"Failed DCB Set Application Priority: sel=%d, prot=%d, prio=%d, err=%d\n",
+				app.selector, app.protocol, app.priority, -err);
+
+		ap->user_prio_map = fwap->user_prio_map;
+		ap->sel_field = fwap->sel_field;
+		ap->protocolid = be16_to_cpu(fwap->protocolid);
+		dcb->msgs |= CXGB4_DCB_FW_APP_ID;
+		break;
+	}
+
+	default:
+		dev_err(adap->pdev_dev, "Unknown DCB update type received %x\n",
+			dcb_type);
+		break;
+	}
+}
+
+/* Data Center Bridging netlink operations.
+ */
+
+
+/* Get current DCB enabled/disabled state.
+ */
+static u8 cxgb4_getstate(struct net_device *dev)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	return pi->dcb.enabled;
+}
+
+/* Set DCB enabled/disabled.
+ */
+static u8 cxgb4_setstate(struct net_device *dev, u8 enabled)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	/* Firmware doesn't provide any mechanism to control the DCB state.
+	 */
+	if (enabled != (pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED))
+		return 1;
+
+	return 0;
+}
+
+static void cxgb4_getpgtccfg(struct net_device *dev, int tc,
+			     u8 *prio_type, u8 *pgid, u8 *bw_per,
+			     u8 *up_tc_map, int local)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int err;
+
+	*prio_type = *pgid = *bw_per = *up_tc_map = 0;
+
+	if (local)
+		INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+	else
+		INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+
+	pcmd.u.dcb.pgid.type = FW_PORT_DCB_TYPE_PGID;
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGID failed with %d\n", -err);
+		return;
+	}
+	*pgid = (be32_to_cpu(pcmd.u.dcb.pgid.pgid) >> (tc * 4)) & 0xf;
+
+	INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
+			-err);
+		return;
+	}
+
+	*bw_per = pcmd.u.dcb.pgrate.pgrate[*pgid];
+	*up_tc_map = (1 << tc);
+
+	/* prio_type is link strict */
+	*prio_type = 0x2;
+}
+
+static void cxgb4_getpgtccfg_tx(struct net_device *dev, int tc,
+				u8 *prio_type, u8 *pgid, u8 *bw_per,
+				u8 *up_tc_map)
+{
+	return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 1);
+}
+
+
+static void cxgb4_getpgtccfg_rx(struct net_device *dev, int tc,
+				u8 *prio_type, u8 *pgid, u8 *bw_per,
+				u8 *up_tc_map)
+{
+	return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 0);
+}
+
+static void cxgb4_setpgtccfg_tx(struct net_device *dev, int tc,
+				u8 prio_type, u8 pgid, u8 bw_per,
+				u8 up_tc_map)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	u32 _pgid;
+	int err;
+
+	if (pgid == DCB_ATTR_VALUE_UNDEFINED)
+		return;
+	if (bw_per == DCB_ATTR_VALUE_UNDEFINED)
+		return;
+
+	INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgid.type = FW_PORT_DCB_TYPE_PGID;
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGID failed with %d\n", -err);
+		return;
+	}
+
+	_pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
+	_pgid &= ~(0xF << (tc * 4));
+	_pgid |= pgid << (tc * 4);
+	pcmd.u.dcb.pgid.pgid = cpu_to_be32(_pgid);
+
+	INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB write PGID failed with %d\n",
+			-err);
+		return;
+	}
+
+	memset(&pcmd, 0, sizeof(struct fw_port_cmd));
+
+	INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
+			-err);
+		return;
+	}
+
+	pcmd.u.dcb.pgrate.pgrate[pgid] = bw_per;
+
+	INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
+	if (pi->dcb.state == CXGB4_DCB_STATE_HOST)
+		pcmd.op_to_portid |= cpu_to_be32(FW_PORT_CMD_APPLY);
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS)
+		dev_err(adap->pdev_dev, "DCB write PGRATE failed with %d\n",
+			-err);
+}
+
+static void cxgb4_getpgbwgcfg(struct net_device *dev, int pgid, u8 *bw_per,
+			      int local)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int err;
+
+	if (local)
+		INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+	else
+		INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+
+	pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
+			-err);
+	} else {
+		*bw_per = pcmd.u.dcb.pgrate.pgrate[pgid];
+	}
+}
+
+static void cxgb4_getpgbwgcfg_tx(struct net_device *dev, int pgid, u8 *bw_per)
+{
+	return cxgb4_getpgbwgcfg(dev, pgid, bw_per, 1);
+}
+
+static void cxgb4_getpgbwgcfg_rx(struct net_device *dev, int pgid, u8 *bw_per)
+{
+	return cxgb4_getpgbwgcfg(dev, pgid, bw_per, 0);
+}
+
+static void cxgb4_setpgbwgcfg_tx(struct net_device *dev, int pgid,
+				 u8 bw_per)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int err;
+
+	INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
+			-err);
+		return;
+	}
+
+	pcmd.u.dcb.pgrate.pgrate[pgid] = bw_per;
+
+	INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
+	if (pi->dcb.state == CXGB4_DCB_STATE_HOST)
+		pcmd.op_to_portid |= cpu_to_be32(FW_PORT_CMD_APPLY);
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+
+	if (err != FW_PORT_DCB_CFG_SUCCESS)
+		dev_err(adap->pdev_dev, "DCB write PGRATE failed with %d\n",
+			-err);
+}
+
+/* Return whether the specified Traffic Class Priority has Priority Pause
+ * Frames enabled.
+ */
+static void cxgb4_getpfccfg(struct net_device *dev, int priority, u8 *pfccfg)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct port_dcb_info *dcb = &pi->dcb;
+
+	if (dcb->state != CXGB4_DCB_STATE_FW_ALLSYNCED ||
+	    priority >= CXGB4_MAX_PRIORITY)
+		*pfccfg = 0;
+	else
+		*pfccfg = (pi->dcb.pfcen >> priority) & 1;
+}
+
+/* Enable/disable Priority Pause Frames for the specified Traffic Class
+ * Priority.
+ */
+static void cxgb4_setpfccfg(struct net_device *dev, int priority, u8 pfccfg)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int err;
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED ||
+	    priority >= CXGB4_MAX_PRIORITY)
+		return;
+
+	INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
+	if (pi->dcb.state == CXGB4_DCB_STATE_HOST)
+		pcmd.op_to_portid |= cpu_to_be32(FW_PORT_CMD_APPLY);
+
+	pcmd.u.dcb.pfc.type = FW_PORT_DCB_TYPE_PFC;
+	pcmd.u.dcb.pfc.pfcen = cpu_to_be16(pi->dcb.pfcen);
+
+	if (pfccfg)
+		pcmd.u.dcb.pfc.pfcen |= cpu_to_be16(1 << priority);
+	else
+		pcmd.u.dcb.pfc.pfcen &= cpu_to_be16(~(1 << priority));
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB PFC write failed with %d\n", -err);
+		return;
+	}
+
+	pi->dcb.pfcen = be16_to_cpu(pcmd.u.dcb.pfc.pfcen);
+}
+
+static u8 cxgb4_setall(struct net_device *dev)
+{
+	return 0;
+}
+
+/* Return DCB capabilities.
+ */
+static u8 cxgb4_getcap(struct net_device *dev, int cap_id, u8 *caps)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	switch (cap_id) {
+	case DCB_CAP_ATTR_PG:
+	case DCB_CAP_ATTR_PFC:
+		*caps = true;
+		break;
+
+	case DCB_CAP_ATTR_PG_TCS:
+		/* 8 priorities for PG represented by bitmap */
+		*caps = 0x80;
+		break;
+
+	case DCB_CAP_ATTR_PFC_TCS:
+		/* 8 priorities for PFC represented by bitmap */
+		*caps = 0x80;
+		break;
+
+	case DCB_CAP_ATTR_GSP:
+		*caps = true;
+		break;
+
+	case DCB_CAP_ATTR_UP2TC:
+	case DCB_CAP_ATTR_BCN:
+		*caps = false;
+		break;
+
+	case DCB_CAP_ATTR_DCBX:
+		*caps = pi->dcb.supported;
+		break;
+
+	default:
+		*caps = false;
+	}
+
+	return 0;
+}
+
+/* Return the number of Traffic Classes for the indicated Traffic Class ID.
+ */
+static int cxgb4_getnumtcs(struct net_device *dev, int tcs_id, u8 *num)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	switch (tcs_id) {
+	case DCB_NUMTCS_ATTR_PG:
+		if (pi->dcb.msgs & CXGB4_DCB_FW_PGRATE)
+			*num = pi->dcb.pg_num_tcs_supported;
+		else
+			*num = 0x8;
+		break;
+
+	case DCB_NUMTCS_ATTR_PFC:
+		*num = 0x8;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Set the number of Traffic Classes supported for the indicated Traffic Class
+ * ID.
+ */
+static int cxgb4_setnumtcs(struct net_device *dev, int tcs_id, u8 num)
+{
+	/* Setting the number of Traffic Classes isn't supported.
+	 */
+	return -ENOSYS;
+}
+
+/* Return whether Priority Flow Control is enabled.  */
+static u8 cxgb4_getpfcstate(struct net_device *dev)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
+		return false;
+
+	return pi->dcb.pfcen != 0;
+}
+
+/* Enable/disable Priority Flow Control. */
+static void cxgb4_setpfcstate(struct net_device *dev, u8 state)
+{
+	/* We can't enable/disable Priority Flow Control but we also can't
+	 * return an error ...
+	 */
+}
+
+/* Return the Application User Priority Map associated with the specified
+ * Application ID.
+ */
+static int __cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id,
+			  int peer)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int i;
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
+		return 0;
+
+	for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+		struct fw_port_cmd pcmd;
+		int err;
+
+		if (peer)
+			INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+		else
+			INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+
+		pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
+		pcmd.u.dcb.app_priority.idx = i;
+
+		err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+		if (err != FW_PORT_DCB_CFG_SUCCESS) {
+			dev_err(adap->pdev_dev, "DCB APP read failed with %d\n",
+				-err);
+			return err;
+		}
+		if (be16_to_cpu(pcmd.u.dcb.app_priority.protocolid) == app_id)
+			return pcmd.u.dcb.app_priority.user_prio_map;
+
+		/* exhausted app list */
+		if (!pcmd.u.dcb.app_priority.protocolid)
+			break;
+	}
+
+	return -EEXIST;
+}
+
+/* Return the Application User Priority Map associated with the specified
+ * Application ID.  Since this routine is prototyped to return "u8" we can't
+ * return errors ...
+ */
+static u8 cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id)
+{
+	int result = __cxgb4_getapp(dev, app_idtype, app_id, 0);
+
+	if (result < 0)
+		result = 0;
+
+	return result;
+}
+
+/* Write a new Application User Priority Map for the specified Application ID.
+ * This routine is prototyped to return "u8" but other instantiations of the
+ * DCB NetLink Operations "setapp" routines return negative errnos for errors.
+ * We follow their lead.
+ */
+static u8 cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
+		       u8 app_prio)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int i, err;
+
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
+		return -EINVAL;
+
+	/* DCB info gets thrown away on link up */
+	if (!netif_carrier_ok(dev))
+		return -ENOLINK;
+
+	if (app_idtype != DCB_APP_IDTYPE_ETHTYPE &&
+	    app_idtype != DCB_APP_IDTYPE_PORTNUM)
+		return -EINVAL;
+
+	for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+		INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
+		pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
+		pcmd.u.dcb.app_priority.idx = i;
+		err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+
+		if (err != FW_PORT_DCB_CFG_SUCCESS) {
+			dev_err(adap->pdev_dev, "DCB app table read failed with %d\n",
+				-err);
+			return err;
+		}
+		if (be16_to_cpu(pcmd.u.dcb.app_priority.protocolid) == app_id) {
+			/* overwrite existing app table */
+			pcmd.u.dcb.app_priority.protocolid = 0;
+			break;
+		}
+		/* find first empty slot */
+		if (!pcmd.u.dcb.app_priority.protocolid)
+			break;
+	}
+
+	if (i == CXGB4_MAX_DCBX_APP_SUPPORTED) {
+		/* no empty slots available */
+		dev_err(adap->pdev_dev, "DCB app table full\n");
+		return -EBUSY;
+	}
+
+	/* write out new app table entry */
+	INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
+	if (pi->dcb.state == CXGB4_DCB_STATE_HOST)
+		pcmd.op_to_portid |= cpu_to_be32(FW_PORT_CMD_APPLY);
+
+	pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
+	pcmd.u.dcb.app_priority.protocolid = cpu_to_be16(app_id);
+	pcmd.u.dcb.app_priority.sel_field = app_idtype;
+	pcmd.u.dcb.app_priority.user_prio_map = app_prio;
+	pcmd.u.dcb.app_priority.idx = i;
+
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB app table write failed with %d\n",
+			-err);
+		return err;
+	}
+
+	return 0;
+}
+
+/* Return whether IEEE Data Center Bridging has been negotiated.
+ */
+static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct port_dcb_info *dcb = &pi->dcb;
+
+	return (dcb->state == CXGB4_DCB_STATE_FW_ALLSYNCED &&
+		(dcb->supported & DCB_CAP_DCBX_VER_IEEE));
+}
+
+/* Fill in the Application User Priority Map associated with the
+ * specified Application.
+ */
+static int cxgb4_ieee_getapp(struct net_device *dev, struct dcb_app *app)
+{
+	int prio;
+
+	if (!cxgb4_ieee_negotiation_complete(dev))
+		return -EINVAL;
+	if (!(app->selector && app->protocol))
+		return -EINVAL;
+
+	prio = dcb_getapp(dev, app);
+	if (prio == 0) {
+		/* If app doesn't exist in dcb_app table, try firmware
+		 * directly.
+		 */
+		prio = __cxgb4_getapp(dev, app->selector, app->protocol, 0);
+	}
+
+	app->priority = prio;
+	return 0;
+}
+
+/* Write a new Application User Priority Map for the specified App id. */
+static int cxgb4_ieee_setapp(struct net_device *dev, struct dcb_app *app)
+{
+	if (!cxgb4_ieee_negotiation_complete(dev))
+		return -EINVAL;
+	if (!(app->selector && app->protocol && app->priority))
+		return -EINVAL;
+
+	cxgb4_setapp(dev, app->selector, app->protocol, app->priority);
+	return dcb_setapp(dev, app);
+}
+
+/* Return our DCBX parameters.
+ */
+static u8 cxgb4_getdcbx(struct net_device *dev)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	/* This is already set by cxgb4_set_dcb_caps, so just return it */
+	return pi->dcb.supported;
+}
+
+/* Set our DCBX parameters.
+ */
+static u8 cxgb4_setdcbx(struct net_device *dev, u8 dcb_request)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	/* Filter out requests which exceed our capabilities.
+	 */
+	if ((dcb_request & (CXGB4_DCBX_FW_SUPPORT | CXGB4_DCBX_HOST_SUPPORT))
+	    != dcb_request)
+		return 1;
+
+	/* Can't set DCBX capabilities if DCBX isn't enabled. */
+	if (!pi->dcb.state)
+		return 1;
+
+	/* There's currently no mechanism to allow for the firmware DCBX
+	 * negotiation to be changed from the Host Driver.  If the caller
+	 * requests exactly the same parameters that we already have then
+	 * we'll allow them to be successfully "set" ...
+	 */
+	if (dcb_request != pi->dcb.supported)
+		return 1;
+
+	pi->dcb.supported = dcb_request;
+	return 0;
+}
+
+static int cxgb4_getpeer_app(struct net_device *dev,
+			     struct dcb_peer_app_info *info, u16 *app_count)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int i, err = 0;
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
+		return 1;
+
+	info->willing = 0;
+	info->error = 0;
+
+	*app_count = 0;
+	for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+		INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+		pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
+		pcmd.u.dcb.app_priority.idx = *app_count;
+		err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+
+		if (err != FW_PORT_DCB_CFG_SUCCESS) {
+			dev_err(adap->pdev_dev, "DCB app table read failed with %d\n",
+				-err);
+			return err;
+		}
+
+		/* find first empty slot */
+		if (!pcmd.u.dcb.app_priority.protocolid)
+			break;
+	}
+	*app_count = i;
+	return err;
+}
+
+static int cxgb4_getpeerapp_tbl(struct net_device *dev, struct dcb_app *table)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	int i, err = 0;
+
+	if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
+		return 1;
+
+	for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+		INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+		pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
+		pcmd.u.dcb.app_priority.idx = i;
+		err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+
+		if (err != FW_PORT_DCB_CFG_SUCCESS) {
+			dev_err(adap->pdev_dev, "DCB app table read failed with %d\n",
+				-err);
+			return err;
+		}
+
+		/* find first empty slot */
+		if (!pcmd.u.dcb.app_priority.protocolid)
+			break;
+
+		table[i].selector = pcmd.u.dcb.app_priority.sel_field;
+		table[i].protocol =
+			be16_to_cpu(pcmd.u.dcb.app_priority.protocolid);
+		table[i].priority = pcmd.u.dcb.app_priority.user_prio_map;
+	}
+	return err;
+}
+
+/* Return Priority Group information.
+ */
+static int cxgb4_cee_peer_getpg(struct net_device *dev, struct cee_pg *pg)
+{
+	struct fw_port_cmd pcmd;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = pi->adapter;
+	u32 pgid;
+	int i, err;
+
+	/* We're always "willing" -- the Switch Fabric always dictates the
+	 * DCBX parameters to us.
+	 */
+	pg->willing = true;
+
+	INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgid.type = FW_PORT_DCB_TYPE_PGID;
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGID failed with %d\n", -err);
+		return err;
+	}
+	pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
+
+	for (i = 0; i < CXGB4_MAX_PRIORITY; i++)
+		pg->prio_pg[i] = (pgid >> (i * 4)) & 0xF;
+
+	INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
+	pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
+	err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
+	if (err != FW_PORT_DCB_CFG_SUCCESS) {
+		dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
+			-err);
+		return err;
+	}
+
+	for (i = 0; i < CXGB4_MAX_PRIORITY; i++)
+		pg->pg_bw[i] = pcmd.u.dcb.pgrate.pgrate[i];
+
+	return 0;
+}
+
+/* Return Priority Flow Control information.
+ */
+static int cxgb4_cee_peer_getpfc(struct net_device *dev, struct cee_pfc *pfc)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+
+	cxgb4_getnumtcs(dev, DCB_NUMTCS_ATTR_PFC, &(pfc->tcs_supported));
+	pfc->pfc_en = pi->dcb.pfcen;
+
+	return 0;
+}
+
+const struct dcbnl_rtnl_ops cxgb4_dcb_ops = {
+	.ieee_getapp		= cxgb4_ieee_getapp,
+	.ieee_setapp		= cxgb4_ieee_setapp,
+
+	/* CEE std */
+	.getstate		= cxgb4_getstate,
+	.setstate		= cxgb4_setstate,
+	.getpgtccfgtx		= cxgb4_getpgtccfg_tx,
+	.getpgbwgcfgtx		= cxgb4_getpgbwgcfg_tx,
+	.getpgtccfgrx		= cxgb4_getpgtccfg_rx,
+	.getpgbwgcfgrx		= cxgb4_getpgbwgcfg_rx,
+	.setpgtccfgtx		= cxgb4_setpgtccfg_tx,
+	.setpgbwgcfgtx		= cxgb4_setpgbwgcfg_tx,
+	.setpfccfg		= cxgb4_setpfccfg,
+	.getpfccfg		= cxgb4_getpfccfg,
+	.setall			= cxgb4_setall,
+	.getcap			= cxgb4_getcap,
+	.getnumtcs		= cxgb4_getnumtcs,
+	.setnumtcs		= cxgb4_setnumtcs,
+	.getpfcstate		= cxgb4_getpfcstate,
+	.setpfcstate		= cxgb4_setpfcstate,
+	.getapp			= cxgb4_getapp,
+	.setapp			= cxgb4_setapp,
+
+	/* DCBX configuration */
+	.getdcbx		= cxgb4_getdcbx,
+	.setdcbx		= cxgb4_setdcbx,
+
+	/* peer apps */
+	.peer_getappinfo	= cxgb4_getpeer_app,
+	.peer_getapptable	= cxgb4_getpeerapp_tbl,
+
+	/* CEE peer */
+	.cee_peer_getpg		= cxgb4_cee_peer_getpg,
+	.cee_peer_getpfc	= cxgb4_cee_peer_getpfc,
+};
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
new file mode 100644
index 000000000000..1ec1d834e257
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
@@ -0,0 +1,141 @@
+/*
+ *  Copyright (C) 2013-2014 Chelsio Communications.  All rights reserved.
+ *
+ *  Written by Anish Bhatt (anish@chelsio.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  The full GNU General Public License is included in this distribution in
+ *  the file called "COPYING".
+ *
+ */
+
+#ifndef __CXGB4_DCB_H
+#define __CXGB4_DCB_H
+
+#include <linux/netdevice.h>
+#include <linux/dcbnl.h>
+#include <net/dcbnl.h>
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+
+#define CXGB4_DCBX_FW_SUPPORT \
+	(DCB_CAP_DCBX_VER_CEE | \
+	 DCB_CAP_DCBX_VER_IEEE | \
+	 DCB_CAP_DCBX_LLD_MANAGED)
+#define CXGB4_DCBX_HOST_SUPPORT \
+	(DCB_CAP_DCBX_VER_CEE | \
+	 DCB_CAP_DCBX_VER_IEEE | \
+	 DCB_CAP_DCBX_HOST)
+
+#define CXGB4_MAX_PRIORITY      CXGB4_MAX_DCBX_APP_SUPPORTED
+#define CXGB4_MAX_TCS           CXGB4_MAX_DCBX_APP_SUPPORTED
+
+#define INIT_PORT_DCB_CMD(__pcmd, __port, __op, __action) \
+	do { \
+		memset(&(__pcmd), 0, sizeof(__pcmd)); \
+		(__pcmd).op_to_portid = \
+			cpu_to_be32(FW_CMD_OP(FW_PORT_CMD) | \
+				    FW_CMD_REQUEST | \
+				    FW_CMD_##__op | \
+				    FW_PORT_CMD_PORTID(__port)); \
+		(__pcmd).action_to_len16 = \
+			cpu_to_be32(FW_PORT_CMD_ACTION(__action) | \
+				    FW_LEN16(pcmd)); \
+	} while (0)
+
+#define INIT_PORT_DCB_READ_PEER_CMD(__pcmd, __port) \
+	INIT_PORT_DCB_CMD(__pcmd, __port, READ, FW_PORT_ACTION_DCB_READ_RECV)
+
+#define INIT_PORT_DCB_READ_LOCAL_CMD(__pcmd, __port) \
+	INIT_PORT_DCB_CMD(__pcmd, __port, READ, FW_PORT_ACTION_DCB_READ_TRANS)
+
+#define INIT_PORT_DCB_READ_SYNC_CMD(__pcmd, __port) \
+	INIT_PORT_DCB_CMD(__pcmd, __port, READ, FW_PORT_ACTION_DCB_READ_DET)
+
+#define INIT_PORT_DCB_WRITE_CMD(__pcmd, __port) \
+	INIT_PORT_DCB_CMD(__pcmd, __port, EXEC, FW_PORT_ACTION_L2_DCB_CFG)
+
+/* States we can be in for a port's Data Center Bridging.
+ */
+enum cxgb4_dcb_state {
+	CXGB4_DCB_STATE_START,		/* initial unknown state */
+	CXGB4_DCB_STATE_HOST,		/* we're using Host DCB (if at all) */
+	CXGB4_DCB_STATE_FW_INCOMPLETE,	/* using firmware DCB, incomplete */
+	CXGB4_DCB_STATE_FW_ALLSYNCED,	/* using firmware DCB, all sync'ed */
+};
+
+/* Data Center Bridging state input for the Finite State Machine.
+ */
+enum cxgb4_dcb_state_input {
+	/* Input from the firmware.
+	 */
+	CXGB4_DCB_INPUT_FW_DISABLED,	/* firmware DCB disabled */
+	CXGB4_DCB_INPUT_FW_ENABLED,	/* firmware DCB enabled */
+	CXGB4_DCB_INPUT_FW_INCOMPLETE,	/* firmware reports incomplete DCB */
+	CXGB4_DCB_INPUT_FW_ALLSYNCED,	/* firmware reports all sync'ed */
+
+};
+
+/* Firmware DCB messages that we've received so far ...
+ */
+enum cxgb4_dcb_fw_msgs {
+	CXGB4_DCB_FW_PGID	= 0x01,
+	CXGB4_DCB_FW_PGRATE	= 0x02,
+	CXGB4_DCB_FW_PRIORATE	= 0x04,
+	CXGB4_DCB_FW_PFC	= 0x08,
+	CXGB4_DCB_FW_APP_ID	= 0x10,
+};
+
+#define CXGB4_MAX_DCBX_APP_SUPPORTED 8
+
+/* Data Center Bridging support;
+ */
+struct port_dcb_info {
+	enum cxgb4_dcb_state state;	/* DCB State Machine */
+	enum cxgb4_dcb_fw_msgs msgs;	/* DCB Firmware messages received */
+	unsigned int supported;		/* OS DCB capabilities supported */
+	bool enabled;			/* OS Enabled state */
+
+	/* Cached copies of DCB information sent by the firmware (in Host
+	 * Native Endian format).
+	 */
+	u32	pgid;			/* Priority Group[0..7] */
+	u8	pfcen;			/* Priority Flow Control[0..7] */
+	u8	pg_num_tcs_supported;	/* max PG Traffic Classes */
+	u8	pfc_num_tcs_supported;	/* max PFC Traffic Classes */
+	u8	pgrate[8];		/* Priority Group Rate[0..7] */
+	u8	priorate[8];		/* Priority Rate[0..7] */
+	struct app_priority { /* Application Information */
+		u8	user_prio_map;	/* Priority Map bitfield */
+		u8	sel_field;	/* Protocol ID interpretation */
+		u16	protocolid;	/* Protocol ID */
+	} app_priority[CXGB4_MAX_DCBX_APP_SUPPORTED];
+};
+
+void cxgb4_dcb_state_init(struct net_device *);
+void cxgb4_dcb_state_fsm(struct net_device *, enum cxgb4_dcb_state_input);
+void cxgb4_dcb_handle_fw_update(struct adapter *, const struct fw_port_cmd *);
+void cxgb4_dcb_set_caps(struct adapter *, const struct fw_port_cmd *);
+extern const struct dcbnl_rtnl_ops cxgb4_dcb_ops;
+
+#define CXGB4_DCB_ENABLED true
+
+#else /* !CONFIG_CHELSIO_T4_DCB */
+
+static inline void cxgb4_dcb_state_init(struct net_device *dev)
+{
+}
+
+#define CXGB4_DCB_ENABLED false
+
+#endif /* !CONFIG_CHELSIO_T4_DCB */
+
+#endif /* __CXGB4_DCB_H */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 2f8d6b910383..02a0ebfa9c40 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -67,6 +67,7 @@
 #include "t4_regs.h"
 #include "t4_msg.h"
 #include "t4fw_api.h"
+#include "cxgb4_dcb.h"
 #include "l2t.h"
 
 #include <../drivers/net/bonding/bonding.h>
@@ -391,6 +392,17 @@ module_param_array(num_vf, uint, NULL, 0644);
 MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3");
 #endif
 
+/* TX Queue select used to determine what algorithm to use for selecting TX
+ * queue. Select between the kernel provided function (select_queue=0) or user
+ * cxgb_select_queue function (select_queue=1)
+ *
+ * Default: select_queue=0
+ */
+static int select_queue;
+module_param(select_queue, int, 0644);
+MODULE_PARM_DESC(select_queue,
+		 "Select between kernel provided method of selecting or driver method of selecting TX queue. Default is kernel method.");
+
 /*
  * The filter TCAM has a fixed portion and a variable portion.  The fixed
  * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP
@@ -458,6 +470,42 @@ static void link_report(struct net_device *dev)
 	}
 }
 
+#ifdef CONFIG_CHELSIO_T4_DCB
+/* Set up/tear down Data Center Bridging Priority mapping for a net device. */
+static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	struct sge_eth_txq *txq = &adap->sge.ethtxq[pi->first_qset];
+	int i;
+
+	/* We use a simple mapping of Port TX Queue Index to DCB
+	 * Priority when we're enabling DCB.
+	 */
+	for (i = 0; i < pi->nqsets; i++, txq++) {
+		u32 name, value;
+		int err;
+
+		name = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
+			FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH) |
+			FW_PARAMS_PARAM_YZ(txq->q.cntxt_id));
+		value = enable ? i : 0xffffffff;
+
+		/* Since we can be called while atomic (from "interrupt
+		 * level") we need to issue the Set Parameters Commannd
+		 * without sleeping (timeout < 0).
+		 */
+		err = t4_set_params_nosleep(adap, adap->mbox, adap->fn, 0, 1,
+					    &name, &value);
+
+		if (err)
+			dev_err(adap->pdev_dev,
+				"Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
+				enable ? "set" : "unset", pi->port_id, i, -err);
+	}
+}
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
 void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat)
 {
 	struct net_device *dev = adapter->port[port_id];
@@ -466,8 +514,13 @@ void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat)
 	if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) {
 		if (link_stat)
 			netif_carrier_on(dev);
-		else
+		else {
+#ifdef CONFIG_CHELSIO_T4_DCB
+			cxgb4_dcb_state_init(dev);
+			dcb_tx_queue_prio_enable(dev, false);
+#endif /* CONFIG_CHELSIO_T4_DCB */
 			netif_carrier_off(dev);
+		}
 
 		link_report(dev);
 	}
@@ -601,10 +654,45 @@ static int link_start(struct net_device *dev)
 		ret = t4_link_start(pi->adapter, mb, pi->tx_chan,
 				    &pi->link_cfg);
 	if (ret == 0)
-		ret = t4_enable_vi(pi->adapter, mb, pi->viid, true, true);
+		ret = t4_enable_vi_params(pi->adapter, mb, pi->viid, true,
+					  true, CXGB4_DCB_ENABLED);
+
 	return ret;
 }
 
+int cxgb4_dcb_enabled(const struct net_device *dev)
+{
+#ifdef CONFIG_CHELSIO_T4_DCB
+	struct port_info *pi = netdev_priv(dev);
+
+	return pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED;
+#else
+	return 0;
+#endif
+}
+EXPORT_SYMBOL(cxgb4_dcb_enabled);
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+/* Handle a Data Center Bridging update message from the firmware. */
+static void dcb_rpl(struct adapter *adap, const struct fw_port_cmd *pcmd)
+{
+	int port = FW_PORT_CMD_PORTID_GET(ntohl(pcmd->op_to_portid));
+	struct net_device *dev = adap->port[port];
+	int old_dcb_enabled = cxgb4_dcb_enabled(dev);
+	int new_dcb_enabled;
+
+	cxgb4_dcb_handle_fw_update(adap, pcmd);
+	new_dcb_enabled = cxgb4_dcb_enabled(dev);
+
+	/* If the DCB has become enabled or disabled on the port then we're
+	 * going to need to set up/tear down DCB Priority parameters for the
+	 * TX Queues associated with the port.
+	 */
+	if (new_dcb_enabled != old_dcb_enabled)
+		dcb_tx_queue_prio_enable(dev, new_dcb_enabled);
+}
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
 /* Clear a filter and release any of its resources that we own.  This also
  * clears the filter's "pending" status.
  */
@@ -709,8 +797,32 @@ static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
 	} else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
 		const struct cpl_fw6_msg *p = (void *)rsp;
 
-		if (p->type == 0)
-			t4_handle_fw_rpl(q->adap, p->data);
+#ifdef CONFIG_CHELSIO_T4_DCB
+		const struct fw_port_cmd *pcmd = (const void *)p->data;
+		unsigned int cmd = FW_CMD_OP_GET(ntohl(pcmd->op_to_portid));
+		unsigned int action =
+			FW_PORT_CMD_ACTION_GET(ntohl(pcmd->action_to_len16));
+
+		if (cmd == FW_PORT_CMD &&
+		    action == FW_PORT_ACTION_GET_PORT_INFO) {
+			int port = FW_PORT_CMD_PORTID_GET(
+					be32_to_cpu(pcmd->op_to_portid));
+			struct net_device *dev = q->adap->port[port];
+			int state_input = ((pcmd->u.info.dcbxdis_pkd &
+					    FW_PORT_CMD_DCBXDIS)
+					   ? CXGB4_DCB_INPUT_FW_DISABLED
+					   : CXGB4_DCB_INPUT_FW_ENABLED);
+
+			cxgb4_dcb_state_fsm(dev, state_input);
+		}
+
+		if (cmd == FW_PORT_CMD &&
+		    action == FW_PORT_ACTION_L2_DCB_CFG)
+			dcb_rpl(q->adap, pcmd);
+		else
+#endif
+			if (p->type == 0)
+				t4_handle_fw_rpl(q->adap, p->data);
 	} else if (opcode == CPL_L2T_WRITE_RPL) {
 		const struct cpl_l2t_write_rpl *p = (void *)rsp;
 
@@ -1290,6 +1402,48 @@ static int del_filter_wr(struct adapter *adapter, int fidx)
 	return 0;
 }
 
+static u16 cxgb_select_queue(struct net_device *dev, struct sk_buff *skb,
+			     void *accel_priv, select_queue_fallback_t fallback)
+{
+	int txq;
+
+#ifdef CONFIG_CHELSIO_T4_DCB
+	/* If a Data Center Bridging has been successfully negotiated on this
+	 * link then we'll use the skb's priority to map it to a TX Queue.
+	 * The skb's priority is determined via the VLAN Tag Priority Code
+	 * Point field.
+	 */
+	if (cxgb4_dcb_enabled(dev)) {
+		u16 vlan_tci;
+		int err;
+
+		err = vlan_get_tag(skb, &vlan_tci);
+		if (unlikely(err)) {
+			if (net_ratelimit())
+				netdev_warn(dev,
+					    "TX Packet without VLAN Tag on DCB Link\n");
+			txq = 0;
+		} else {
+			txq = (vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+		}
+		return txq;
+	}
+#endif /* CONFIG_CHELSIO_T4_DCB */
+
+	if (select_queue) {
+		txq = (skb_rx_queue_recorded(skb)
+			? skb_get_rx_queue(skb)
+			: smp_processor_id());
+
+		while (unlikely(txq >= dev->real_num_tx_queues))
+			txq -= dev->real_num_tx_queues;
+
+		return txq;
+	}
+
+	return fallback(dev, skb) % dev->real_num_tx_queues;
+}
+
 static inline int is_offload(const struct adapter *adap)
 {
 	return adap->params.offload;
@@ -4601,6 +4755,7 @@ static const struct net_device_ops cxgb4_netdev_ops = {
 	.ndo_open             = cxgb_open,
 	.ndo_stop             = cxgb_close,
 	.ndo_start_xmit       = t4_eth_xmit,
+	.ndo_select_queue     =	cxgb_select_queue,
 	.ndo_get_stats64      = cxgb_get_stats,
 	.ndo_set_rx_mode      = cxgb_set_rxmode,
 	.ndo_set_mac_address  = cxgb_set_mac_addr,
@@ -5841,12 +5996,33 @@ static inline void init_rspq(struct adapter *adap, struct sge_rspq *q,
 static void cfg_queues(struct adapter *adap)
 {
 	struct sge *s = &adap->sge;
-	int i, q10g = 0, n10g = 0, qidx = 0;
+	int i, n10g = 0, qidx = 0;
+#ifndef CONFIG_CHELSIO_T4_DCB
+	int q10g = 0;
+#endif
 	int ciq_size;
 
 	for_each_port(adap, i)
 		n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg);
+#ifdef CONFIG_CHELSIO_T4_DCB
+	/* For Data Center Bridging support we need to be able to support up
+	 * to 8 Traffic Priorities; each of which will be assigned to its
+	 * own TX Queue in order to prevent Head-Of-Line Blocking.
+	 */
+	if (adap->params.nports * 8 > MAX_ETH_QSETS) {
+		dev_err(adap->pdev_dev, "MAX_ETH_QSETS=%d < %d!\n",
+			MAX_ETH_QSETS, adap->params.nports * 8);
+		BUG_ON(1);
+	}
 
+	for_each_port(adap, i) {
+		struct port_info *pi = adap2pinfo(adap, i);
+
+		pi->first_qset = qidx;
+		pi->nqsets = 8;
+		qidx += pi->nqsets;
+	}
+#else /* !CONFIG_CHELSIO_T4_DCB */
 	/*
 	 * We default to 1 queue per non-10G port and up to # of cores queues
 	 * per 10G port.
@@ -5863,6 +6039,7 @@ static void cfg_queues(struct adapter *adap)
 		pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1;
 		qidx += pi->nqsets;
 	}
+#endif /* !CONFIG_CHELSIO_T4_DCB */
 
 	s->ethqsets = qidx;
 	s->max_ethqsets = qidx;   /* MSI-X may lower it later */
@@ -5981,8 +6158,14 @@ static int enable_msix(struct adapter *adap)
 		/* need nchan for each possible ULD */
 		ofld_need = 3 * nchan;
 	}
+#ifdef CONFIG_CHELSIO_T4_DCB
+	/* For Data Center Bridging we need 8 Ethernet TX Priority Queues for
+	 * each port.
+	 */
+	need = 8 * adap->params.nports + EXTRA_VECS + ofld_need;
+#else
 	need = adap->params.nports + EXTRA_VECS + ofld_need;
-
+#endif
 	want = pci_enable_msix_range(adap->pdev, entries, need, want);
 	if (want < 0)
 		return want;
@@ -6245,6 +6428,10 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		netdev->priv_flags |= IFF_UNICAST_FLT;
 
 		netdev->netdev_ops = &cxgb4_netdev_ops;
+#ifdef CONFIG_CHELSIO_T4_DCB
+		netdev->dcbnl_ops = &cxgb4_dcb_ops;
+		cxgb4_dcb_state_init(netdev);
+#endif
 		netdev->ethtool_ops = &cxgb_ethtool_ops;
 	}
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index 55e9daf7f9d4..d719decbfb28 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index 8a96572fdde0..96041397ee15 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.h b/drivers/net/ethernet/chelsio/cxgb4/l2t.h
index 85eb5c71358d..a30126ce90cb 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index dd4355d248e4..8bae1aa744a7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index bba67681aeaa..6665cd410f2a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -3175,6 +3175,46 @@ int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
 }
 
 /**
+ *      t4_set_params_nosleep - sets FW or device parameters
+ *      @adap: the adapter
+ *      @mbox: mailbox to use for the FW command
+ *      @pf: the PF
+ *      @vf: the VF
+ *      @nparams: the number of parameters
+ *      @params: the parameter names
+ *      @val: the parameter values
+ *
+ *	 Does not ever sleep
+ *      Sets the value of FW or device parameters.  Up to 7 parameters can be
+ *      specified at once.
+ */
+int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox,
+			  unsigned int pf, unsigned int vf,
+			  unsigned int nparams, const u32 *params,
+			  const u32 *val)
+{
+	struct fw_params_cmd c;
+	__be32 *p = &c.param[0].mnem;
+
+	if (nparams > 7)
+		return -EINVAL;
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) |
+				FW_CMD_REQUEST | FW_CMD_WRITE |
+				FW_PARAMS_CMD_PFN(pf) |
+				FW_PARAMS_CMD_VFN(vf));
+	c.retval_len16 = cpu_to_be32(FW_LEN16(c));
+
+	while (nparams--) {
+		*p++ = cpu_to_be32(*params++);
+		*p++ = cpu_to_be32(*val++);
+	}
+
+	return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
  *	t4_set_params - sets FW or device parameters
  *	@adap: the adapter
  *	@mbox: mailbox to use for the FW command
@@ -3499,6 +3539,33 @@ int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
 }
 
 /**
+ *      t4_enable_vi_params - enable/disable a virtual interface
+ *      @adap: the adapter
+ *      @mbox: mailbox to use for the FW command
+ *      @viid: the VI id
+ *      @rx_en: 1=enable Rx, 0=disable Rx
+ *      @tx_en: 1=enable Tx, 0=disable Tx
+ *      @dcb_en: 1=enable delivery of Data Center Bridging messages.
+ *
+ *      Enables/disables a virtual interface.  Note that setting DCB Enable
+ *      only makes sense when enabling a Virtual Interface ...
+ */
+int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
+			unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
+{
+	struct fw_vi_enable_cmd c;
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
+			     FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
+
+	c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN(rx_en) |
+			       FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c) |
+			       FW_VI_ENABLE_CMD_DCB_INFO(dcb_en));
+	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
  *	t4_enable_vi - enable/disable a virtual interface
  *	@adap: the adapter
  *	@mbox: mailbox to use for the FW command
@@ -3511,14 +3578,7 @@ int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
 		 bool rx_en, bool tx_en)
 {
-	struct fw_vi_enable_cmd c;
-
-	memset(&c, 0, sizeof(c));
-	c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
-			     FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
-	c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN(rx_en) |
-			       FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c));
-	return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+	return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
 }
 
 /**
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
index 71b799b5b0f4..35e3d8e32881 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
index 973eb11aa98a..abb45809c0c8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 225ad8a5722d..3360025ad922 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 9cc973fbcf26..4a6ae4db7397 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the Chelsio T4 Ethernet driver for Linux.
  *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ * Copyright (c) 2009-2014 Chelsio Communications, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -46,9 +46,11 @@ enum fw_retval {
 	FW_EFAULT		= 14,	/* bad address; fw bad */
 	FW_EBUSY		= 16,	/* resource busy */
 	FW_EEXIST		= 17,	/* file exists */
+	FW_ENODEV		= 19,	/* no such device */
 	FW_EINVAL		= 22,	/* invalid argument */
 	FW_ENOSPC		= 28,	/* no space left on device */
 	FW_ENOSYS		= 38,	/* functionality not implemented */
+	FW_ENODATA		= 61,	/* no data available */
 	FW_EPROTO		= 71,	/* protocol error */
 	FW_EADDRINUSE		= 98,	/* address already in use */
 	FW_EADDRNOTAVAIL	= 99,	/* cannot assigned requested address */
@@ -989,6 +991,7 @@ enum fw_params_param_dmaq {
 	FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_MNGT = 0x10,
 	FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_CTRL = 0x11,
 	FW_PARAMS_PARAM_DMAQ_EQ_SCHEDCLASS_ETH = 0x12,
+	FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH = 0x13,
 };
 
 #define FW_PARAMS_MNEM(x)      ((x) << 24)
@@ -1422,6 +1425,7 @@ struct fw_vi_enable_cmd {
 #define FW_VI_ENABLE_CMD_VIID(x) ((x) << 0)
 #define FW_VI_ENABLE_CMD_IEN(x) ((x) << 31)
 #define FW_VI_ENABLE_CMD_EEN(x) ((x) << 30)
+#define FW_VI_ENABLE_CMD_DCB_INFO(x) ((x) << 28)
 #define FW_VI_ENABLE_CMD_LED (1U << 29)
 
 /* VI VF stats offset definitions */
@@ -1594,6 +1598,9 @@ enum fw_port_action {
 	FW_PORT_ACTION_GET_PORT_INFO	= 0x0003,
 	FW_PORT_ACTION_L2_PPP_CFG	= 0x0004,
 	FW_PORT_ACTION_L2_DCB_CFG	= 0x0005,
+	FW_PORT_ACTION_DCB_READ_TRANS	= 0x0006,
+	FW_PORT_ACTION_DCB_READ_RECV	= 0x0007,
+	FW_PORT_ACTION_DCB_READ_DET	= 0x0008,
 	FW_PORT_ACTION_LOW_PWR_TO_NORMAL = 0x0010,
 	FW_PORT_ACTION_L1_LOW_PWR_EN	= 0x0011,
 	FW_PORT_ACTION_L2_WOL_MODE_EN	= 0x0012,
@@ -1637,6 +1644,14 @@ enum fw_port_dcb_type {
 	FW_PORT_DCB_TYPE_PRIORATE	= 0x02,
 	FW_PORT_DCB_TYPE_PFC		= 0x03,
 	FW_PORT_DCB_TYPE_APP_ID		= 0x04,
+	FW_PORT_DCB_TYPE_CONTROL	= 0x05,
+};
+
+enum fw_port_dcb_feature_state {
+	FW_PORT_DCB_FEATURE_STATE_PENDING = 0x0,
+	FW_PORT_DCB_FEATURE_STATE_SUCCESS = 0x1,
+	FW_PORT_DCB_FEATURE_STATE_ERROR	= 0x2,
+	FW_PORT_DCB_FEATURE_STATE_TIMEOUT = 0x3,
 };
 
 struct fw_port_cmd {
@@ -1648,9 +1663,11 @@ struct fw_port_cmd {
 			__be32 r;
 		} l1cfg;
 		struct fw_port_l2cfg {
-			__be16 ctlbf_to_ivlan0;
+			__u8   ctlbf;
+			__u8   ovlan3_to_ivlan0;
 			__be16 ivlantype;
-			__be32 txipg_pkd;
+			__be16 txipg_force_pinfo;
+			__be16 mtu;
 			__be16 ovlan0mask;
 			__be16 ovlan0type;
 			__be16 ovlan1mask;
@@ -1666,24 +1683,60 @@ struct fw_port_cmd {
 			__be16 acap;
 			__be16 mtu;
 			__u8   cbllen;
-			__u8   r9;
-			__be32 r10;
-			__be64 r11;
+			__u8   auxlinfo;
+			__u8   dcbxdis_pkd;
+			__u8   r8_lo[3];
+			__be64 r9;
 		} info;
-		struct fw_port_ppp {
-			__be32 pppen_to_ncsich;
-			__be32 r11;
-		} ppp;
-		struct fw_port_dcb {
-			__be16 cfg;
-			u8 up_map;
-			u8 sf_cfgrc;
-			__be16 prot_ix;
-			u8 pe7_to_pe0;
-			u8 numTCPFCs;
-			__be32 pgid0_to_pgid7;
-			__be32 numTCs_oui;
-			u8 pgpc[8];
+		struct fw_port_diags {
+			__u8   diagop;
+			__u8   r[3];
+			__be32 diagval;
+		} diags;
+		union fw_port_dcb {
+			struct fw_port_dcb_pgid {
+				__u8   type;
+				__u8   apply_pkd;
+				__u8   r10_lo[2];
+				__be32 pgid;
+				__be64 r11;
+			} pgid;
+			struct fw_port_dcb_pgrate {
+				__u8   type;
+				__u8   apply_pkd;
+				__u8   r10_lo[5];
+				__u8   num_tcs_supported;
+				__u8   pgrate[8];
+			} pgrate;
+			struct fw_port_dcb_priorate {
+				__u8   type;
+				__u8   apply_pkd;
+				__u8   r10_lo[6];
+				__u8   strict_priorate[8];
+			} priorate;
+			struct fw_port_dcb_pfc {
+				__u8   type;
+				__u8   pfcen;
+				__u8   r10[5];
+				__u8   max_pfc_tcs;
+				__be64 r11;
+			} pfc;
+			struct fw_port_app_priority {
+				__u8   type;
+				__u8   r10[2];
+				__u8   idx;
+				__u8   user_prio_map;
+				__u8   sel_field;
+				__be16 protocolid;
+				__be64 r12;
+			} app_priority;
+			struct fw_port_dcb_control {
+				__u8   type;
+				__u8   all_syncd_pkd;
+				__be16 pfc_state_to_app_state;
+				__be32 r11;
+				__be64 r12;
+			} control;
 		} dcb;
 	} u;
 };
@@ -1720,6 +1773,10 @@ struct fw_port_cmd {
 #define FW_PORT_CMD_MODTYPE_MASK 0x1f
 #define FW_PORT_CMD_MODTYPE_GET(x) (((x) >> 0) & FW_PORT_CMD_MODTYPE_MASK)
 
+#define FW_PORT_CMD_DCBXDIS (1U << 7)
+#define FW_PORT_CMD_APPLY (1U <<  7)
+#define FW_PORT_CMD_ALL_SYNCD (1U << 7)
+
 #define FW_PORT_CMD_PPPEN(x) ((x) << 31)
 #define FW_PORT_CMD_TPSRC(x) ((x) << 28)
 #define FW_PORT_CMD_NCSISRC(x) ((x) << 24)