diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2022-01-12 16:47:05 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-01-12 16:47:05 -0800 |
| commit | 4eb766f64d120f0b80ec24282df789b7db2ff838 (patch) | |
| tree | aa10974bcdafef558dbd42b3a14c66264ec50b9d | |
| parent | Merge tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip (diff) | |
| parent | Merge branch 'dt/linus' into dt/next (diff) | |
| download | linux-dev-4eb766f64d120f0b80ec24282df789b7db2ff838.tar.xz linux-dev-4eb766f64d120f0b80ec24282df789b7db2ff838.zip | |
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
172 files changed, 5189 insertions, 3379 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index c9abfbe3f0aa..41c555181b6f 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -65,7 +65,9 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd))) override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ -Wno-graph_child_address \ - -Wno-interrupt_provider + -Wno-interrupt_provider \ + -Wno-unique_unit_address \ + -Wunique_unit_address_if_enabled # Disable undocumented compatible checks until warning free override DT_CHECKER_FLAGS ?= diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml index 4682f991a5c8..f8530a50863a 100644 --- a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml +++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml @@ -166,16 +166,6 @@ examples: }; }; - dma0: dma@3000000 { - /* compatible = "arm,pl330", "arm,primecell"; */ - cci-control-port = <&cci_control0>; - reg = <0x0 0x3000000 0x0 0x1000>; - interrupts = <10>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - cci@2c090000 { compatible = "arm,cci-400"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt deleted file mode 100644 index 6efabba530f1..000000000000 --- a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt +++ /dev/null @@ -1,27 +0,0 @@ -* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU) - -ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores -with a shared L3 memory system, control logic and external interfaces to -form a multicore cluster. The PMU enables to gather various statistics on -the operations of the DSU. The PMU provides independent 32bit counters that -can count any of the supported events, along with a 64bit cycle counter. -The PMU is accessed via CPU system registers and has no MMIO component. - -** DSU PMU required properties: - -- compatible : should be one of : - - "arm,dsu-pmu" - -- interrupts : Exactly 1 SPI must be listed. - -- cpus : List of phandles for the CPUs connected to this DSU instance. - - -** Example: - -dsu-pmu-0 { - compatible = "arm,dsu-pmu"; - interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>; - cpus = <&cpu_0>, <&cpu_1>; -}; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index dfa28e3525cb..0dcebc48ea22 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -137,6 +137,9 @@ properties: - arm,cortex-a75 - arm,cortex-a76 - arm,cortex-a77 + - arm,cortex-a78 + - arm,cortex-a510 + - arm,cortex-a710 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -145,8 +148,12 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,cortex-x1 + - arm,cortex-x2 - arm,neoverse-e1 - arm,neoverse-n1 + - arm,neoverse-n2 + - arm,neoverse-v1 - brcm,brahma-b15 - brcm,brahma-b53 - brcm,vulcan diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index e17ac049e890..981bac451698 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -44,10 +44,18 @@ properties: - arm,cortex-a76-pmu - arm,cortex-a77-pmu - arm,cortex-a78-pmu + - arm,cortex-a510-pmu + - arm,cortex-a710-pmu + - arm,cortex-x1-pmu + - arm,cortex-x2-pmu - arm,neoverse-e1-pmu - arm,neoverse-n1-pmu + - arm,neoverse-n2-pmu + - arm,neoverse-v1-pmu - brcm,vulcan-pmu - cavium,thunder-pmu + - nvidia,denver-pmu + - nvidia,carmel-pmu - qcom,krait-pmu - qcom,scorpion-pmu - qcom,scorpion-mp-pmu diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml index 5db7cfba81a4..a46193ad94e0 100644 --- a/Documentation/devicetree/bindings/arm/ux500.yaml +++ b/Documentation/devicetree/bindings/arm/ux500.yaml @@ -20,6 +20,11 @@ properties: - const: st-ericsson,mop500 - const: st-ericsson,u8500 + - description: ST-Ericsson HREF520 + items: + - const: st-ericsson,href520 + - const: st-ericsson,u8500 + - description: ST-Ericsson HREF (v60+) items: - const: st-ericsson,hrefv60+ @@ -30,9 +35,34 @@ properties: - const: calaosystems,snowball-a9500 - const: st-ericsson,u9500 + - description: Samsung Galaxy Ace 2 (GT-I8160) + items: + - const: samsung,codina + - const: st-ericsson,u8500 + + - description: Samsung Galaxy Beam (GT-I8530) + items: + - const: samsung,gavini + - const: st-ericsson,u8500 + - description: Samsung Galaxy S III mini (GT-I8190) items: - const: samsung,golden - const: st-ericsson,u8500 + - description: Samsung Galaxy S Advance (GT-I9070) + items: + - const: samsung,janice + - const: st-ericsson,u8500 + + - description: Samsung Galaxy Amp (SGH-I407) + items: + - const: samsung,kyle + - const: st-ericsson,u8500 + + - description: Samsung Galaxy XCover 2 (GT-S7710) + items: + - const: samsung,skomer + - const: st-ericsson,u8500 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt deleted file mode 100644 index b9ae4ce4a0a0..000000000000 --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Broadcom SATA3 AHCI Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -Each SATA controller should have its own node. - -Required properties: -- compatible : should be one or more of - "brcm,bcm7216-ahci" - "brcm,bcm7425-ahci" - "brcm,bcm7445-ahci" - "brcm,bcm-nsp-ahci" - "brcm,sata3-ahci" - "brcm,bcm63138-ahci" -- reg : register mappings for AHCI and SATA_TOP_CTRL -- reg-names : "ahci" and "top-ctrl" -- interrupts : interrupt mapping for SATA IRQ - -Optional properties: - -- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle - pointing to the RESCAL reset controller provider node. -- reset-names: for "brcm,bcm7216-ahci", must be "rescal". - -Also see ahci-platform.txt. - -Example: - - sata@f045a000 { - compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; - reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; - reg-names = "ahci", "top-ctrl"; - interrupts = <0 30 0>; - #address-cells = <1>; - #size-cells = <0>; - - sata0: sata-port@0 { - reg = <0>; - phys = <&sata_phy 0>; - }; - - sata1: sata-port@1 { - reg = <1>; - phys = <&sata_phy 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml new file mode 100644 index 000000000000..235a93ac86b0 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom SATA3 AHCI Controller + +description: + SATA nodes are defined to describe on-chip Serial ATA controllers. + Each SATA controller should have its own node. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: sata-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm7216-ahci + - brcm,bcm7445-ahci + - brcm,bcm7425-ahci + - brcm,bcm63138-ahci + - const: brcm,sata3-ahci + - items: + - const: brcm,bcm-nsp-ahci + + reg: + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: ahci + - const: top-ctrl + + interrupts: + maxItems: 1 + + dma-coherent: true + +if: + properties: + compatible: + contains: + enum: + - brcm,bcm7216-ahci + - brcm,bcm63138-ahci +then: + properties: + resets: + maxItems: 1 + reset-names: + enum: + - rescal + - ahci + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + sata@f045a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; + reg-names = "ahci", "top-ctrl"; + interrupts = <0 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt deleted file mode 100644 index 10f6d0a8159d..000000000000 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom GISB bus Arbiter controller - -Required properties: - -- compatible: - "brcm,bcm7278-gisb-arb" for V7 28nm chips - "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips - "brcm,bcm7435-gisb-arb" for newer 40nm chips - "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips - "brcm,bcm7038-gisb-arb" for 130nm chips -- reg: specifies the base physical address and size of the registers -- interrupts: specifies the two interrupts (timeout and TEA) to be used from - the parent interrupt controller. A third optional interrupt may be specified - for breakpoints. - -Optional properties: - -- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB - masters are valid at the system level -- brcm,gisb-arb-master-names: string list of the litteral name of the GISB - masters. Should match the number of bits set in brcm,gisb-master-mask and - the order in which they appear - -Example: - -gisb-arb@f0400000 { - compatible = "brcm,gisb-arb"; - reg = <0xf0400000 0x800>; - interrupts = <0>, <2>; - interrupt-parent = <&sun_l2_intc>; - - brcm,gisb-arb-master-mask = <0x7>; - brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0"; -}; diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml new file mode 100644 index 000000000000..b23c3001991e --- /dev/null +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom GISB bus Arbiter controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm7445-gisb-arb # for other 28nm chips + - const: brcm,gisb-arb + - items: + - enum: + - brcm,bcm7278-gisb-arb # for V7 28nm chips + - brcm,bcm7435-gisb-arb # for newer 40nm chips + - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips + - brcm,bcm7038-gisb-arb # for 130nm chips + - brcm,gisb-arb # fallback compatible + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: timeout interrupt line + - description: target abort interrupt line + - description: breakpoint interrupt line + + brcm,gisb-arb-master-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + 32-bits wide bitmask used to specify which GISB masters are valid at the + system level + + brcm,gisb-arb-master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: > + String list of the litteral name of the GISB masters. Should match the + number of bits set in brcm,gisb-master-mask and the order in which they + appear from MSB to LSB. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + gisb-arb@f0400000 { + compatible = "brcm,gisb-arb"; + reg = <0xf0400000 0x800>; + interrupts = <0>, <2>; + interrupt-parent = <&sun_l2_intc>; + brcm,gisb-arb-master-mask = <0x7>; + brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt deleted file mode 100644 index c79d31f7f66e..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt +++ /dev/null @@ -1,190 +0,0 @@ -* Samsung Exynos5260 Clock Controller - -Exynos5260 has 13 clock controllers which are instantiated -independently from the device-tree. These clock controllers -generate and supply clocks to various hardware blocks within -the SoC. - -Each clock is assigned an identifier and client nodes can use -this identifier to specify the clock which they consume. All -available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5260-clk.h header and can be used in -device tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It -is expected that they are defined using standard clock bindings -with following clock-output-names: - - - "fin_pll" - PLL input clock from XXTI - - "xrtcxti" - input clock from XRTCXTI - - "ioclk_pcm_extclk" - pcm external operation clock - - "ioclk_spdif_extclk" - spdif external operation clock - - "ioclk_i2s_cdclk" - i2s0 codec clock - -Phy clocks: - -There are several clocks which are generated by specific PHYs. -These clocks are fed into the clock controller and then routed to -the hardware blocks. These clocks are defined as fixed clocks in the -driver with following names: - - - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3 - - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2 - - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1 - - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0 - - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock - - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock - - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link - - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock - - "phyclk_dptx_phy_clk_div2" - - "phyclk_mipi_dphy_4l_m_rxclkesc0" - - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock - - "phyclk_usbhost20_phy_freeclk" - - "phyclk_usbhost20_phy_clk48mohci" - - "phyclk_usbdrd30_udrd30_pipe_pclk" - - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock - -Required Properties for Clock Controller: - - - compatible: should be one of the following. - 1) "samsung,exynos5260-clock-top" - 2) "samsung,exynos5260-clock-peri" - 3) "samsung,exynos5260-clock-egl" - 4) "samsung,exynos5260-clock-kfc" - 5) "samsung,exynos5260-clock-g2d" - 6) "samsung,exynos5260-clock-mif" - 7) "samsung,exynos5260-clock-mfc" - 8) "samsung,exynos5260-clock-g3d" - 9) "samsung,exynos5260-clock-fsys" - 10) "samsung,exynos5260-clock-aud" - 11) "samsung,exynos5260-clock-isp" - 12) "samsung,exynos5260-clock-gscl" - 13) "samsung,exynos5260-clock-disp" - - - reg: physical base address of the controller and the length of - memory mapped region. - - - #clock-cells: should be 1. - - - clocks: list of clock identifiers which are fed as the input to - the given clock controller. Please refer the next section to find - the input clocks for a given controller. - - - clock-names: list of names of clocks which are fed as the input - to the given clock controller. - -Input clocks for top clock controller: - - fin_pll - - dout_mem_pll - - dout_bus_pll - - dout_media_pll - -Input clocks for peri clock controller: - - fin_pll - - ioclk_pcm_extclk - - ioclk_i2s_cdclk - - ioclk_spdif_extclk - - phyclk_hdmi_phy_ref_cko - - dout_aclk_peri_66 - - dout_sclk_peri_uart0 - - dout_sclk_peri_uart1 - - dout_sclk_peri_uart2 - - dout_sclk_peri_spi0_b - - dout_sclk_peri_spi1_b - - dout_sclk_peri_spi2_b - - dout_aclk_peri_aud - - dout_sclk_peri_spi0_b - -Input clocks for egl clock controller: - - fin_pll - - dout_bus_pll - -Input clocks for kfc clock controller: - - fin_pll - - dout_media_pll - -Input clocks for g2d clock controller: - - fin_pll - - dout_aclk_g2d_333 - -Input clocks for mif clock controller: - - fin_pll - -Input clocks for mfc clock controller: - - fin_pll - - dout_aclk_mfc_333 - -Input clocks for g3d clock controller: - - fin_pll - -Input clocks for fsys clock controller: - - fin_pll - - phyclk_usbhost20_phy_phyclock - - phyclk_usbhost20_phy_freeclk - - phyclk_usbhost20_phy_clk48mohci - - phyclk_usbdrd30_udrd30_pipe_pclk - - phyclk_usbdrd30_udrd30_phyclock - - dout_aclk_fsys_200 - -Input clocks for aud clock controller: - - fin_pll - - fout_aud_pll - - ioclk_i2s_cdclk - - ioclk_pcm_extclk - -Input clocks for isp clock controller: - - fin_pll - - dout_aclk_isp1_266 - - dout_aclk_isp1_400 - - mout_aclk_isp1_266 - -Input clocks for gscl clock controller: - - fin_pll - - dout_aclk_gscl_400 - - dout_aclk_gscl_333 - -Input clocks for disp clock controller: - - fin_pll - - phyclk_dptx_phy_ch3_txd_clk - - phyclk_dptx_phy_ch2_txd_clk - - phyclk_dptx_phy_ch1_txd_clk - - phyclk_dptx_phy_ch0_txd_clk - - phyclk_hdmi_phy_tmds_clko - - phyclk_hdmi_phy_ref_clko - - phyclk_hdmi_phy_pixel_clko - - phyclk_hdmi_link_o_tmds_clkhi - - phyclk_mipi_dphy_4l_m_txbyte_clkhs - - phyclk_dptx_phy_o_ref_clk_24m - - phyclk_dptx_phy_clk_div2 - - phyclk_mipi_dphy_4l_m_rxclkesc0 - - phyclk_hdmi_phy_ref_cko - - ioclk_spdif_extclk - - dout_aclk_peri_aud - - dout_aclk_disp_222 - - dout_sclk_disp_pixel - - dout_aclk_disp_333 - -Example 1: An example of a clock controller node is listed below. - - clock_mfc: clock-controller@11090000 { - compatible = "samsung,exynos5260-clock-mfc"; - clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>; - clock-names = "fin_pll", "dout_aclk_mfc_333"; - reg = <0x11090000 0x10000>; - #clock-cells = <1>; - }; - -Example 2: UART controller node that consumes the clock generated by the - peri clock controller. Refer to the standard clock bindings for - information about 'clocks' and 'clock-names' property. - - serial@12c00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 146 0>; - clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt deleted file mode 100644 index 217beb27c30e..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Samsung Exynos5410 Clock Controller - -The Exynos5410 clock controller generates and supplies clock to various -controllers within the Exynos5410 SoC. - -Required Properties: - -- compatible: should be "samsung,exynos5410-clock" - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -- clocks: should contain an entry specifying the root clock from external - oscillator supplied through XXTI or XusbXTI pin. This clock should be - defined using standard clock bindings with "fin_pll" clock-output-name. - That clock is being passed internally to the 9 PLLs. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5410.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - fin_pll: xxti { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5410-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - clocks = <&fin_pll>; - }; - -Example 2: UART controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - serial@12c20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt deleted file mode 100644 index 183c327a7d6b..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ /dev/null @@ -1,507 +0,0 @@ -* Samsung Exynos5433 CMU (Clock Management Units) - -The Exynos5433 clock controller generates and supplies clock to various -controllers within the Exynos5433 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP - which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS - domains and bus clocks. - - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF - which generates clocks for LLI (Low Latency Interface) IP. - - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF - which generates clocks for DRAM Memory Controller domain. - - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC - which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs. - - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS - which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs. - - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS - which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs. - - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D - which generates clocks for G2D/MDMA IPs. - - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP - which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs. - - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD - which generates clocks for Cortex-A5/BUS/AUDIO clocks. - - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1" - and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS - which generates global data buses clock and global peripheral buses clock. - - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D - which generates clocks for 3D Graphics Engine IP. - - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL - which generates clocks for GSCALER IPs. - - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO - which generates clocks for Cortex-A53 Quad-core processor. - - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS - which generates clocks for Cortex-A57 Quad-core processor, CoreSight and - L2 cache controller. - - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL - which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. - - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC - which generates clocks for MFC(Multi-Format Codec) IP. - - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC - which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. - - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP - which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. - - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 - which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} - IPs. - - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 - which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. - - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM - which generates clocks for SSS (Security SubSystem) and SlimSSS IPs. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -- clocks: list of the clock controller input clock identifiers, - from common clock bindings. Please refer the next section - to find the input clocks for a given controller. - -- clock-names: list of the clock controller input clock names, - as described in clock-bindings.txt. - - Input clocks for top clock controller: - - oscclk - - sclk_mphy_pll - - sclk_mfc_pll - - sclk_bus_pll - - Input clocks for cpif clock controller: - - oscclk - - Input clocks for mif clock controller: - - oscclk - - sclk_mphy_pll - - Input clocks for fsys clock controller: - - oscclk - - sclk_ufs_mphy - - aclk_fsys_200 - - sclk_pcie_100_fsys - - sclk_ufsunipro_fsys - - sclk_mmc2_fsys - - sclk_mmc1_fsys - - sclk_mmc0_fsys - - sclk_usbhost30_fsys - - sclk_usbdrd30_fsys - - Input clocks for g2d clock controller: - - oscclk - - aclk_g2d_266 - - aclk_g2d_400 - - Input clocks for disp clock controller: - - oscclk - - sclk_dsim1_disp - - sclk_dsim0_disp - - sclk_dsd_disp - - sclk_decon_tv_eclk_disp - - sclk_decon_vclk_disp - - sclk_decon_eclk_disp - - sclk_decon_tv_vclk_disp - - aclk_disp_333 - - Input clocks for audio clock controller: - - oscclk - - fout_aud_pll - - Input clocks for bus0 clock controller: - - aclk_bus0_400 - - Input clocks for bus1 clock controller: - - aclk_bus1_400 - - Input clocks for bus2 clock controller: - - oscclk - - aclk_bus2_400 - - Input clocks for g3d clock controller: - - oscclk - - aclk_g3d_400 - - Input clocks for gscl clock controller: - - oscclk - - aclk_gscl_111 - - aclk_gscl_333 - - Input clocks for apollo clock controller: - - oscclk - - sclk_bus_pll_apollo - - Input clocks for atlas clock controller: - - oscclk - - sclk_bus_pll_atlas - - Input clocks for mscl clock controller: - - oscclk - - sclk_jpeg_mscl - - aclk_mscl_400 - - Input clocks for mfc clock controller: - - oscclk - - aclk_mfc_400 - - Input clocks for hevc clock controller: - - oscclk - - aclk_hevc_400 - - Input clocks for isp clock controller: - - oscclk - - aclk_isp_dis_400 - - aclk_isp_400 - - Input clocks for cam0 clock controller: - - oscclk - - aclk_cam0_333 - - aclk_cam0_400 - - aclk_cam0_552 - - Input clocks for cam1 clock controller: - - oscclk - - sclk_isp_uart_cam1 - - sclk_isp_spi1_cam1 - - sclk_isp_spi0_cam1 - - aclk_cam1_333 - - aclk_cam1_400 - - aclk_cam1_552 - - Input clocks for imem clock controller: - - oscclk - - aclk_imem_sssx_266 - - aclk_imem_266 - - aclk_imem_200 - -Optional properties: - - power-domains: a phandle to respective power domain node as described by - generic PM domain bindings (see power/power_domain.txt for more - information). - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5433.h header and can be used in device -tree sources. - -Example 1: Examples of 'oscclk' source clock node are listed below. - - xxti: xxti { - compatible = "fixed-clock"; - clock-output-names = "oscclk"; - #clock-cells = <0>; - }; - -Example 2: Examples of clock controller nodes are listed below. - - cmu_top: clock-controller@10030000 { - compatible = "samsung,exynos5433-cmu-top"; - reg = <0x10030000 0x0c04>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_mphy_pll", - "sclk_mfc_pll", - "sclk_bus_pll"; - clocks = <&xxti>, - <&cmu_cpif CLK_SCLK_MPHY_PLL>, - <&cmu_mif CLK_SCLK_MFC_PLL>, - <&cmu_mif CLK_SCLK_BUS_PLL>; - }; - - cmu_cpif: clock-controller@10fc0000 { - compatible = "samsung,exynos5433-cmu-cpif"; - reg = <0x10fc0000 0x0c04>; - #clock-cells = <1>; - - clock-names = "oscclk"; - clocks = <&xxti>; - }; - - cmu_mif: clock-controller@105b0000 { - compatible = "samsung,exynos5433-cmu-mif"; - reg = <0x105b0000 0x100c>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_mphy_pll"; - clocks = <&xxti>, - <&cmu_cpif CLK_SCLK_MPHY_PLL>; - }; - - cmu_peric: clock-controller@14c80000 { - compatible = "samsung,exynos5433-cmu-peric"; - reg = <0x14c80000 0x0b08>; - #clock-cells = <1>; - }; - - cmu_peris: clock-controller@10040000 { - compatible = "samsung,exynos5433-cmu-peris"; - reg = <0x10040000 0x0b20>; - #clock-cells = <1>; - }; - - cmu_fsys: clock-controller@156e0000 { - compatible = "samsung,exynos5433-cmu-fsys"; - reg = <0x156e0000 0x0b04>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_ufs_mphy", - "aclk_fsys_200", - "sclk_pcie_100_fsys", - "sclk_ufsunipro_fsys", - "sclk_mmc2_fsys", - "sclk_mmc1_fsys", - "sclk_mmc0_fsys", - "sclk_usbhost30_fsys", - "sclk_usbdrd30_fsys"; - clocks = <&xxti>, - <&cmu_cpif CLK_SCLK_UFS_MPHY>, - <&cmu_top CLK_ACLK_FSYS_200>, - <&cmu_top CLK_SCLK_PCIE_100_FSYS>, - <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, - <&cmu_top CLK_SCLK_MMC2_FSYS>, - <&cmu_top CLK_SCLK_MMC1_FSYS>, - <&cmu_top CLK_SCLK_MMC0_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>; - }; - - cmu_g2d: clock-controller@12460000 { - compatible = "samsung,exynos5433-cmu-g2d"; - reg = <0x12460000 0x0b08>; - #clock-cells = <1>; - - clock-names = "oscclk", - "aclk_g2d_266", - "aclk_g2d_400"; - clocks = <&xxti>, - <&cmu_top CLK_ACLK_G2D_266>, - <&cmu_top CLK_ACLK_G2D_400>; - power-domains = <&pd_g2d>; - }; - - cmu_disp: clock-controller@13b90000 { - compatible = "samsung,exynos5433-cmu-disp"; - reg = <0x13b90000 0x0c04>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_dsim1_disp", - "sclk_dsim0_disp", - "sclk_dsd_disp", - "sclk_decon_tv_eclk_disp", - "sclk_decon_vclk_disp", - "sclk_decon_eclk_disp", - "sclk_decon_tv_vclk_disp", - "aclk_disp_333"; - clocks = <&xxti>, - <&cmu_mif CLK_SCLK_DSIM1_DISP>, - <&cmu_mif CLK_SCLK_DSIM0_DISP>, - <&cmu_mif CLK_SCLK_DSD_DISP>, - <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, - <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, - <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, - <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, - <&cmu_mif CLK_ACLK_DISP_333>; - power-domains = <&pd_disp>; - }; - - cmu_aud: clock-controller@114c0000 { - compatible = "samsung,exynos5433-cmu-aud"; - reg = <0x114c0000 0x0b04>; - #clock-cells = <1>; - - clock-names = "oscclk", "fout_aud_pll"; - clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; - power-domains = <&pd_aud>; - }; - - cmu_bus0: clock-controller@13600000 { - compatible = "samsung,exynos5433-cmu-bus0"; - reg = <0x13600000 0x0b04>; - #clock-cells = <1>; - - clock-names = "aclk_bus0_400"; - clocks = <&cmu_top CLK_ACLK_BUS0_400>; - }; - - cmu_bus1: clock-controller@14800000 { - compatible = "samsung,exynos5433-cmu-bus1"; - reg = <0x14800000 0x0b04>; - #clock-cells = <1>; - - clock-names = "aclk_bus1_400"; - clocks = <&cmu_top CLK_ACLK_BUS1_400>; - }; - - cmu_bus2: clock-controller@13400000 { - compatible = "samsung,exynos5433-cmu-bus2"; - reg = <0x13400000 0x0b04>; - #clock-cells = <1>; - - clock-names = "oscclk", "aclk_bus2_400"; - clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; - }; - - cmu_g3d: clock-controller@14aa0000 { - compatible = "samsung,exynos5433-cmu-g3d"; - reg = <0x14aa0000 0x1000>; - #clock-cells = <1>; - - clock-names = "oscclk", "aclk_g3d_400"; - clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; - power-domains = <&pd_g3d>; - }; - - cmu_gscl: clock-controller@13cf0000 { - compatible = "samsung,exynos5433-cmu-gscl"; - reg = <0x13cf0000 0x0b10>; - #clock-cells = <1>; - - clock-names = "oscclk", - "aclk_gscl_111", - "aclk_gscl_333"; - clocks = <&xxti>, - <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; - power-domains = <&pd_gscl>; - }; - - cmu_apollo: clock-controller@11900000 { - compatible = "samsung,exynos5433-cmu-apollo"; - reg = <0x11900000 0x1088>; - #clock-cells = <1>; - - clock-names = "oscclk", "sclk_bus_pll_apollo"; - clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; - }; - - cmu_atlas: clock-controller@11800000 { - compatible = "samsung,exynos5433-cmu-atlas"; - reg = <0x11800000 0x1088>; - #clock-cells = <1>; - - clock-names = "oscclk", "sclk_bus_pll_atlas"; - clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; - }; - - cmu_mscl: clock-controller@105d0000 { - compatible = "samsung,exynos5433-cmu-mscl"; - reg = <0x105d0000 0x0b10>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_jpeg_mscl", - "aclk_mscl_400"; - clocks = <&xxti>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_top CLK_ACLK_MSCL_400>; - power-domains = <&pd_mscl>; - }; - - cmu_mfc: clock-controller@15280000 { - compatible = "samsung,exynos5433-cmu-mfc"; - reg = <0x15280000 0x0b08>; - #clock-cells = <1>; - - clock-names = "oscclk", "aclk_mfc_400"; - clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; - power-domains = <&pd_mfc>; - }; - - cmu_hevc: clock-controller@14f80000 { - compatible = "samsung,exynos5433-cmu-hevc"; - reg = <0x14f80000 0x0b08>; - #clock-cells = <1>; - - clock-names = "oscclk", "aclk_hevc_400"; - clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; - power-domains = <&pd_hevc>; - }; - - cmu_isp: clock-controller@146d0000 { - compatible = "samsung,exynos5433-cmu-isp"; - reg = <0x146d0000 0x0b0c>; - #clock-cells = <1>; - - clock-names = "oscclk", - "aclk_isp_dis_400", - "aclk_isp_400"; - clocks = <&xxti>, - <&cmu_top CLK_ACLK_ISP_DIS_400>, - <&cmu_top CLK_ACLK_ISP_400>; - power-domains = <&pd_isp>; - }; - - cmu_cam0: clock-controller@120d0000 { - compatible = "samsung,exynos5433-cmu-cam0"; - reg = <0x120d0000 0x0b0c>; - #clock-cells = <1>; - - clock-names = "oscclk", - "aclk_cam0_333", - "aclk_cam0_400", - "aclk_cam0_552"; - clocks = <&xxti>, - <&cmu_top CLK_ACLK_CAM0_333>, - <&cmu_top CLK_ACLK_CAM0_400>, - <&cmu_top CLK_ACLK_CAM0_552>; - power-domains = <&pd_cam0>; - }; - - cmu_cam1: clock-controller@145d0000 { - compatible = "samsung,exynos5433-cmu-cam1"; - reg = <0x145d0000 0x0b08>; - #clock-cells = <1>; - - clock-names = "oscclk", - "sclk_isp_uart_cam1", - "sclk_isp_spi1_cam1", - "sclk_isp_spi0_cam1", - "aclk_cam1_333", - "aclk_cam1_400", - "aclk_cam1_552"; - clocks = <&xxti>, - <&cmu_top CLK_SCLK_ISP_UART_CAM1>, - <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, - <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, - <&cmu_top CLK_ACLK_CAM1_333>, - <&cmu_top CLK_ACLK_CAM1_400>, - <&cmu_top CLK_ACLK_CAM1_552>; - power-domains = <&pd_cam1>; - }; - - cmu_imem: clock-controller@11060000 { - compatible = "samsung,exynos5433-cmu-imem"; - reg = <0x11060000 0x1000>; - #clock-cells = <1>; - - clock-names = "oscclk", - "aclk_imem_sssx_266", - "aclk_imem_266", - "aclk_imem_200"; - clocks = <&xxti>, - <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, - <&cmu_top CLK_DIV_ACLK_IMEM_266>, - <&cmu_top CLK_DIV_ACLK_IMEM_200>; - }; - -Example 3: UART controller node that consumes the clock generated by the clock - controller. - - serial_0: serial@14c10000 { - compatible = "samsung,exynos5433-uart"; - reg = <0x14C10000 0x100>; - interrupts = <0 421 0>; - clocks = <&cmu_peric CLK_PCLK_UART0>, - <&cmu_peric CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_bus>; - }; diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt deleted file mode 100644 index 6bf1e7493f61..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt +++ /dev/null @@ -1,108 +0,0 @@ -* Samsung Exynos7 Clock Controller - -Exynos7 clock controller has various blocks which are instantiated -independently from the device-tree. These clock controllers -generate and supply clocks to various hardware blocks within -the SoC. - -Each clock is assigned an identifier and client nodes can use -this identifier to specify the clock which they consume. All -available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos7-clk.h header and can be used in -device tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It -is expected that they are defined using standard clock bindings -with following clock-output-names: - - - "fin_pll" - PLL input clock from XXTI - -Required Properties for Clock Controller: - - - compatible: clock controllers will use one of the following - compatible strings to indicate the clock controller - functionality. - - - "samsung,exynos7-clock-topc" - - "samsung,exynos7-clock-top0" - - "samsung,exynos7-clock-top1" - - "samsung,exynos7-clock-ccore" - - "samsung,exynos7-clock-peric0" - - "samsung,exynos7-clock-peric1" - - "samsung,exynos7-clock-peris" - - "samsung,exynos7-clock-fsys0" - - "samsung,exynos7-clock-fsys1" - - "samsung,exynos7-clock-mscl" - - "samsung,exynos7-clock-aud" - - - reg: physical base address of the controller and the length of - memory mapped region. - - - #clock-cells: should be 1. - - - clocks: list of clock identifiers which are fed as the input to - the given clock controller. Please refer the next section to - find the input clocks for a given controller. - -- clock-names: list of names of clocks which are fed as the input - to the given clock controller. - -Input clocks for top0 clock controller: - - fin_pll - - dout_sclk_bus0_pll - - dout_sclk_bus1_pll - - dout_sclk_cc_pll - - dout_sclk_mfc_pll - - dout_sclk_aud_pll - -Input clocks for top1 clock controller: - - fin_pll - - dout_sclk_bus0_pll - - dout_sclk_bus1_pll - - dout_sclk_cc_pll - - dout_sclk_mfc_pll - -Input clocks for ccore clock controller: - - fin_pll - - dout_aclk_ccore_133 - -Input clocks for peric0 clock controller: - - fin_pll - - dout_aclk_peric0_66 - - sclk_uart0 - -Input clocks for peric1 clock controller: - - fin_pll - - dout_aclk_peric1_66 - - sclk_uart1 - - sclk_uart2 - - sclk_uart3 - - sclk_spi0 - - sclk_spi1 - - sclk_spi2 - - sclk_spi3 - - sclk_spi4 - - sclk_i2s1 - - sclk_pcm1 - - sclk_spdif - -Input clocks for peris clock controller: - - fin_pll - - dout_aclk_peris_66 - -Input clocks for fsys0 clock controller: - - fin_pll - - dout_aclk_fsys0_200 - - dout_sclk_mmc2 - -Input clocks for fsys1 clock controller: - - fin_pll - - dout_aclk_fsys1_200 - - dout_sclk_mmc0 - - dout_sclk_mmc1 - -Input clocks for aud clock controller: - - fin_pll - - fout_aud_pll diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml index b1740d7abe68..c0e19ff92c76 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -55,11 +55,4 @@ examples: <0 72 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; }; - - can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; - reg = <0x53fc8000 0x4000>; - interrupts = <82>; - clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; - clock-names = "ipg", "per"; - }; +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml new file mode 100644 index 000000000000..a3fac5c6809d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5260 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + - "xrtcxti" - input clock from XRTCXTI + - "ioclk_pcm_extclk" - pcm external operation clock + - "ioclk_spdif_extclk" - spdif external operation clock + - "ioclk_i2s_cdclk" - i2s0 codec clock + + Phy clocks:: + There are several clocks which are generated by specific PHYs. These clocks + are fed into the clock controller and then routed to the hardware blocks. + These clocks are defined as fixed clocks in the driver with following names:: + - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3 + - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2 + - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1 + - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0 + - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock + - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock + - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link + - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock + - "phyclk_dptx_phy_clk_div2" + - "phyclk_mipi_dphy_4l_m_rxclkesc0" + - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock + - "phyclk_usbhost20_phy_freeclk" + - "phyclk_usbhost20_phy_clk48mohci" + - "phyclk_usbdrd30_udrd30_pipe_pclk" + - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5260-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos5260-clock-top + - samsung,exynos5260-clock-peri + - samsung,exynos5260-clock-egl + - samsung,exynos5260-clock-kfc + - samsung,exynos5260-clock-g2d + - samsung,exynos5260-clock-mif + - samsung,exynos5260-clock-mfc + - samsung,exynos5260-clock-g3d + - samsung,exynos5260-clock-fsys + - samsung,exynos5260-clock-aud + - samsung,exynos5260-clock-isp + - samsung,exynos5260-clock-gscl + - samsung,exynos5260-clock-disp + + clocks: + minItems: 1 + maxItems: 19 + + clock-names: + minItems: 1 + maxItems: 19 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-top + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: dout_mem_pll + - const: dout_bus_pll + - const: dout_media_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-peri + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: fin_pll + - const: ioclk_pcm_extclk + - const: ioclk_i2s_cdclk + - const: ioclk_spdif_extclk + - const: phyclk_hdmi_phy_ref_cko + - const: dout_aclk_peri_66 + - const: dout_sclk_peri_uart0 + - const: dout_sclk_peri_uart1 + - const: dout_sclk_peri_uart2 + - const: dout_sclk_peri_spi0_b + - const: dout_sclk_peri_spi1_b + - const: dout_sclk_peri_spi2_b + - const: dout_aclk_peri_aud + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-egl + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_bus_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-kfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_media_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-g2d + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_g2d_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-mif + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: fin_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-mfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_mfc_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-g3d + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: fin_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-fsys + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: fin_pll + - const: phyclk_usbhost20_phy_phyclock + - const: phyclk_usbhost20_phy_freeclk + - const: phyclk_usbhost20_phy_clk48mohci + - const: phyclk_usbdrd30_udrd30_pipe_pclk + - const: phyclk_usbdrd30_udrd30_phyclock + - const: dout_aclk_fsys_200 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-aud + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: fout_aud_pll + - const: ioclk_i2s_cdclk + - const: ioclk_pcm_extclk + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-isp + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_isp1_266 + - const: dout_aclk_isp1_400 + - const: mout_aclk_isp1_266 + + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-gscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_gscl_400 + - const: dout_aclk_gscl_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5260-clock-disp + then: + properties: + clocks: + minItems: 19 + maxItems: 19 + clock-names: + items: + - const: fin_pll + - const: phyclk_dptx_phy_ch3_txd_clk + - const: phyclk_dptx_phy_ch2_txd_clk + - const: phyclk_dptx_phy_ch1_txd_clk + - const: phyclk_dptx_phy_ch0_txd_clk + - const: phyclk_hdmi_phy_tmds_clko + - const: phyclk_hdmi_phy_ref_clko + - const: phyclk_hdmi_phy_pixel_clko + - const: phyclk_hdmi_link_o_tmds_clkhi + - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs + - const: phyclk_dptx_phy_o_ref_clk_24m + - const: phyclk_dptx_phy_clk_div2 + - const: phyclk_mipi_dphy_4l_m_rxclkesc0 + - const: phyclk_hdmi_phy_ref_cko + - const: ioclk_spdif_extclk + - const: dout_aclk_peri_aud + - const: dout_aclk_disp_222 + - const: dout_sclk_disp_pixel + - const: dout_aclk_disp_333 + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5260-clk.h> + + fin_pll: clock { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_mif MIF_DOUT_MEM_PLL>, + <&clock_mif MIF_DOUT_BUS_PLL>, + <&clock_mif MIF_DOUT_MEDIA_PLL>; + clock-names = "fin_pll", + "dout_mem_pll", + "dout_bus_pll", + "dout_media_pll"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml new file mode 100644 index 000000000000..032862e9f55b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5410 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5410.h header. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5410-clock + + clocks: + description: + Should contain an entry specifying the root clock from external + oscillator supplied through XXTI or XusbXTI pin. This clock should be + defined using standard clock bindings with "fin_pll" clock-output-name. + That clock is being passed internally to the 9 PLLs. + maxItems: 1 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5410.h> + + fin_pll: osc-clock { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml new file mode 100644 index 000000000000..edd1b4ac4334 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml @@ -0,0 +1,524 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "oscclk" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos5433.h header. + +properties: + compatible: + enum: + # CMU_TOP which generates clocks for + # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus + # clocks + - samsung,exynos5433-cmu-top + # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP + - samsung,exynos5433-cmu-cpif + # CMU_MIF which generates clocks for DRAM Memory Controller domain + - samsung,exynos5433-cmu-mif + # CMU_PERIC which generates clocks for + # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs + - samsung,exynos5433-cmu-peric + # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs + - samsung,exynos5433-cmu-peris + # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs + - samsung,exynos5433-cmu-fsys + - samsung,exynos5433-cmu-g2d + # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs + - samsung,exynos5433-cmu-disp + - samsung,exynos5433-cmu-aud + - samsung,exynos5433-cmu-bus0 + - samsung,exynos5433-cmu-bus1 + - samsung,exynos5433-cmu-bus2 + - samsung,exynos5433-cmu-g3d + - samsung,exynos5433-cmu-gscl + - samsung,exynos5433-cmu-apollo + # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor, + # CoreSight and L2 cache controller + - samsung,exynos5433-cmu-atlas + # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and + # JPEG IPs + - samsung,exynos5433-cmu-mscl + - samsung,exynos5433-cmu-mfc + - samsung,exynos5433-cmu-hevc + # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs + - samsung,exynos5433-cmu-isp + # CMU_CAM0 which generates clocks for + # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs + - samsung,exynos5433-cmu-cam0 + # CMU_CAM1 which generates clocks for + # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs + - samsung,exynos5433-cmu-cam1 + # CMU_IMEM which generates clocks for SSS (Security SubSystem) and + # SlimSSS IPs + - samsung,exynos5433-cmu-imem + + clocks: + minItems: 1 + maxItems: 10 + + clock-names: + minItems: 1 + maxItems: 10 + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-top + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: sclk_mphy_pll + - const: sclk_mfc_pll + - const: sclk_bus_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cpif + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: oscclk + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mif + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_mphy_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-fsys + then: + properties: + clocks: + minItems: 10 + maxItems: 10 + clock-names: + items: + - const: oscclk + - const: sclk_ufs_mphy + - const: aclk_fsys_200 + - const: sclk_pcie_100_fsys + - const: sclk_ufsunipro_fsys + - const: sclk_mmc2_fsys + - const: sclk_mmc1_fsys + - const: sclk_mmc0_fsys + - const: sclk_usbhost30_fsys + - const: sclk_usbdrd30_fsys + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-g2d + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_g2d_266 + - const: aclk_g2d_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-disp + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: oscclk + - const: sclk_dsim1_disp + - const: sclk_dsim0_disp + - const: sclk_dsd_disp + - const: sclk_decon_tv_eclk_disp + - const: sclk_decon_vclk_disp + - const: sclk_decon_eclk_disp + - const: sclk_decon_tv_vclk_disp + - const: aclk_disp_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-aud + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: fout_aud_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus0 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: aclk_bus0_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus1 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: aclk_bus1_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-bus2 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_bus2_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-g3d + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_g3d_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-gscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_gscl_111 + - const: aclk_gscl_333 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-apollo + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_bus_pll_apollo + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-atlas + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: sclk_bus_pll_atlas + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mscl + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: sclk_jpeg_mscl + - const: aclk_mscl_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-mfc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_mfc_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-hevc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: oscclk + - const: aclk_hevc_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-isp + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: oscclk + - const: aclk_isp_dis_400 + - const: aclk_isp_400 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cam0 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: aclk_cam0_333 + - const: aclk_cam0_400 + - const: aclk_cam0_552 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-cam1 + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: oscclk + - const: sclk_isp_uart_cam1 + - const: sclk_isp_spi1_cam1 + - const: sclk_isp_spi0_cam1 + - const: aclk_cam1_333 + - const: aclk_cam1_400 + - const: aclk_cam1_552 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-cmu-imem + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: oscclk + - const: aclk_imem_sssx_266 + - const: aclk_imem_266 + - const: aclk_imem_200 + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + xxti: clock { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml new file mode 100644 index 000000000000..599baf0b7231 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml @@ -0,0 +1,272 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "fin_pll" - PLL input clock from XXTI + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos7-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos7-clock-topc + - samsung,exynos7-clock-top0 + - samsung,exynos7-clock-top1 + - samsung,exynos7-clock-ccore + - samsung,exynos7-clock-peric0 + - samsung,exynos7-clock-peric1 + - samsung,exynos7-clock-peris + - samsung,exynos7-clock-fsys0 + - samsung,exynos7-clock-fsys1 + - samsung,exynos7-clock-mscl + - samsung,exynos7-clock-aud + + clocks: + minItems: 1 + maxItems: 13 + + clock-names: + minItems: 1 + maxItems: 13 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-top0 + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + clock-names: + items: + - const: fin_pll + - const: dout_sclk_bus0_pll + - const: dout_sclk_bus1_pll + - const: dout_sclk_cc_pll + - const: dout_sclk_mfc_pll + - const: dout_sclk_aud_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-top1 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: fin_pll + - const: dout_sclk_bus0_pll + - const: dout_sclk_bus1_pll + - const: dout_sclk_cc_pll + - const: dout_sclk_mfc_pll + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-ccore + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_ccore_133 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peric0 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peric0_66 + - const: sclk_uart0 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peric1 + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peric1_66 + - const: sclk_uart1 + - const: sclk_uart2 + - const: sclk_uart3 + - const: sclk_spi0 + - const: sclk_spi1 + - const: sclk_spi2 + - const: sclk_spi3 + - const: sclk_spi4 + - const: sclk_i2s1 + - const: sclk_pcm1 + - const: sclk_spdif + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-peris + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_peris_66 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-fsys0 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_fsys0_200 + - const: dout_sclk_mmc2 + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-fsys1 + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: fin_pll + - const: dout_aclk_fsys1_200 + - const: dout_sclk_mmc0 + - const: dout_sclk_mmc1 + - const: dout_sclk_ufsunipro20 + - const: dout_sclk_phy_fsys1 + - const: dout_sclk_phy_fsys1_26m + required: + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-clock-aud + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: fin_pll + - const: fout_aud_pll + required: + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos7-clk.h> + + fin_pll: clock { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, + <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", + "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", + "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt deleted file mode 100644 index a86c83bf9d4e..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Samsung S5P6442/S5PC110/S5PV210 Clock Controller - -Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock -controller, which generates and supplies clock to various controllers -within the SoC. - -Required Properties: - -- compatible: should be one of following: - - "samsung,s5pv210-clock" : for clock controller of Samsung - S5PC110/S5PV210 SoCs, - - "samsung,s5p6442-clock" : for clock controller of Samsung - S5P6442 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s5pv210.h header and can be used in device tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xxti": external crystal oscillator connected to XXTI and XXTO pins of -the SoC, - - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO -pins of the SoC, - -A subset of above clocks available on given board shall be specified in -board device tree, including the system base clock, as selected by XOM[0] -pin of the SoC. Refer to generic fixed rate clock bindings -documentation[1] for more information how to specify these clocks. - -[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml - -Example: Clock controller node: - - clock: clock-controller@7e00f000 { - compatible = "samsung,s5pv210-clock"; - reg = <0x7e00f000 0x1000>; - #clock-cells = <1>; - }; - -Example: Required external clocks: - - xxti: clock-xxti { - compatible = "fixed-clock"; - clock-output-names = "xxti"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - - xusbxti: clock-xusbxti { - compatible = "fixed-clock"; - clock-output-names = "xusbxti"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - uart0: serial@e2900000 { - compatible = "samsung,s5pv210-uart"; - reg = <0xe2900000 0x400>; - interrupt-parent = <&vic1>; - interrupts = <10>; - clock-names = "uart", "clk_uart_baud0", - "clk_uart_baud1"; - clocks = <&clocks UART0>, <&clocks UART0>, - <&clocks SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml new file mode 100644 index 000000000000..dcb29a2d1159 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Expected external clocks, defined in DTS as fixed-rate clocks with a matching + name:: + - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of + the SoC, + - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO + pins of the SoC, + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/s5pv210.h header. + +properties: + compatible: + enum: + - samsung,s5pv210-clock + - samsung,s5p6442-clock + + clocks: + items: + - description: xxti clock + - description: xusbxti clock + + clock-names: + items: + - const: xxti + - const: xusbxti + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/s5pv210.h> + + xxti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + + clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt deleted file mode 100644 index 7ee0e9eac973..000000000000 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt +++ /dev/null @@ -1,19 +0,0 @@ -Qualcomm MSM pseudo random number generator. - -Required properties: - -- compatible : should be "qcom,prng" for 8916 etc - : should be "qcom,prng-ee" for 8996 and later using EE - (Execution Environment) slice of prng -- reg : specifies base physical address and size of the registers map -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block - -Example: - - rng@f9bff000 { - compatible = "qcom,prng"; - reg = <0xf9bff000 0x200>; - clocks = <&clock GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml new file mode 100644 index 000000000000..bb42f4588b40 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Pseudo Random Number Generator + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + enum: + - qcom,prng # 8916 etc. + - qcom,prng-ee # 8996 and later using EE + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&clk 125>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index b4ea7c92fb3d..0dca4b3d66e4 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -31,13 +31,11 @@ properties: clocks: items: - description: Display AHB clock from gcc - - description: Display AXI clock - description: Display core clock clock-names: items: - const: iface - - const: bus - const: core interrupts: @@ -160,9 +158,8 @@ examples: power-domains = <&dispcc MDSS_GDSC>; clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; + clock-names = "iface", "core"; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index 4f92365e888a..63c82a4378ff 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -35,6 +35,8 @@ properties: phandle of the gpio for power ic line Power IC supply enable, High active + port: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index ef4c0a24512d..563766d283f6 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -34,7 +34,7 @@ properties: description: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names (active high) - vddio-supply: + vddi0-supply: description: phandle of the regulator that provides the supply voltage Power IC supply @@ -75,8 +75,6 @@ examples: reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; port { tianma_nt36672a_in_0: endpoint { remote-endpoint = <&dsi0_out>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index c2499a7906f5..44a29d813f14 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -83,13 +83,25 @@ properties: format: description: > Format of the framebuffer: + * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b + * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r + * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b + * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a + * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b + * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b enum: + - a1r5g5b5 + - a2r10g10b10 - a8b8g8r8 + - a8r8g8b8 - r5g6b5 + - r5g5b5a1 + - r8g8b8 + - x1r5g5b5 - x2r10g10b10 - x8r8g8b8 diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index ce1ef93cce93..54f67cb51040 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -110,7 +110,7 @@ examples: }; }; - panel-dsi@0 { + panel@0 { compatible = "orisetech,otm8009a"; reg = <0>; reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; @@ -125,4 +125,3 @@ examples: }; ... - diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index d32a71b975fe..75ad898c59bc 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -50,7 +50,7 @@ examples: dma@3000000 { compatible = "sifive,fu540-c000-pdma"; reg = <0x3000000 0x8000>; - interrupts = <23 24 25 26 27 28 29 30>; + interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>; #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt deleted file mode 100644 index 5d468ecd1809..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt +++ /dev/null @@ -1,83 +0,0 @@ -Broadcom STB "UPG GIO" GPIO controller - -The controller's registers are organized as sets of eight 32-bit -registers with each set controlling a bank of up to 32 pins. A single -interrupt is shared for all of the banks handled by the controller. - -Required properties: - -- compatible: - Must be "brcm,brcmstb-gpio" - -- reg: - Define the base and range of the I/O address space containing - the brcmstb GPIO controller registers - -- #gpio-cells: - Should be <2>. The first cell is the pin number (within the controller's - pin space), and the second is used for the following: - bit[0]: polarity (0 for active-high, 1 for active-low) - -- gpio-controller: - Specifies that the node is a GPIO controller. - -- brcm,gpio-bank-widths: - Number of GPIO lines for each bank. Number of elements must - correspond to number of banks suggested by the 'reg' property. - -Optional properties: - -- interrupts: - The interrupt shared by all GPIO lines for this controller. - -- interrupts-extended: - Alternate form of specifying interrupts and parents that allows for - multiple parents. This takes precedence over 'interrupts' and - 'interrupt-parent'. Wakeup-capable GPIO controllers often route their - wakeup interrupt lines through a different interrupt controller than the - primary interrupt line, making this property necessary. - -- #interrupt-cells: - Should be <2>. The first cell is the GPIO number, the second should specify - flags. The following subset of flags is supported: - - bits[3:0] trigger type and level flags - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Valid combinations are 1, 2, 3, 4, 8. - See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- interrupt-controller: - Marks the device node as an interrupt controller - -- wakeup-source: - GPIOs for this controller can be used as a wakeup source - -Example: - upg_gio: gpio@f040a700 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; - gpio-controller; - interrupt-controller; - reg = <0xf040a700 0x80>; - interrupt-parent = <&irq0_intc>; - interrupts = <0x6>; - brcm,gpio-bank-widths = <32 32 32 24>; - }; - - upg_gio_aon: gpio@f04172c0 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; - gpio-controller; - interrupt-controller; - reg = <0xf04172c0 0x40>; - interrupt-parent = <&irq0_aon_intc>; - interrupts = <0x6>; - interrupts-extended = <&irq0_aon_intc 0x6>, - <&aon_pm_l2_intc 0x5>; - wakeup-source; - brcm,gpio-bank-widths = <18 4>; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml new file mode 100644 index 000000000000..4a896ff7edc5 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB "UPG GIO" GPIO controller + +description: > + The controller's registers are organized as sets of eight 32-bit + registers with each set controlling a bank of up to 32 pins. A single + interrupt is shared for all of the banks handled by the controller. + +maintainers: + - Doug Berger <opendmb@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm7445-gpio + - const: brcm,brcmstb-gpio + + reg: + maxItems: 1 + description: > + Define the base and range of the I/O address space containing + the brcmstb GPIO controller registers + + "#gpio-cells": + const: 2 + description: > + The first cell is the pin number (within the controller's + pin space), and the second is used for the following: + bit[0]: polarity (0 for active-high, 1 for active-low) + + gpio-controller: true + + brcm,gpio-bank-widths: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: > + Number of GPIO lines for each bank. Number of elements must + correspond to number of banks suggested by the 'reg' property. + + interrupts: + maxItems: 1 + description: > + The interrupt shared by all GPIO lines for this controller. + + "#interrupt-cells": + const: 2 + description: | + The first cell is the GPIO number, the second should specify + flags. The following subset of flags is supported: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + + interrupt-controller: true + + wakeup-source: + type: boolean + description: > + GPIOs for this controller can be used as a wakeup source + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - "brcm,gpio-bank-widths" + +additionalProperties: false + +examples: + - | + upg_gio: gpio@f040a700 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf040a700 0x80>; + interrupt-parent = <&irq0_intc>; + interrupts = <0x6>; + brcm,gpio-bank-widths = <32 32 32 24>; + }; + + upg_gio_aon: gpio@f04172c0 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf04172c0 0x40>; + interrupt-parent = <&irq0_aon_intc>; + interrupts = <0x6>; + wakeup-source; + brcm,gpio-bank-widths = <18 4>; + }; diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml index 9ad470e01953..b085450b527f 100644 --- a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml +++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml @@ -43,7 +43,6 @@ required: - gpio-controller - interrupt-controller - "#interrupt-cells" - - interrupt-parent additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 6f98dd55fb4c..63a08f3f321d 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -19,6 +19,7 @@ properties: - amlogic,meson-g12a-mali - mediatek,mt8183-mali - realtek,rtd1619-mali + - renesas,r9a07g044-mali - rockchip,px30-mali - rockchip,rk3568-mali - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable @@ -27,19 +28,26 @@ properties: maxItems: 1 interrupts: + minItems: 3 items: - description: Job interrupt - description: MMU interrupt - description: GPU interrupt + - description: Event interrupt interrupt-names: + minItems: 3 items: - const: job - const: mmu - const: gpu + - const: event clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: true mali-supply: true @@ -52,7 +60,10 @@ properties: maxItems: 3 resets: - maxItems: 2 + minItems: 1 + maxItems: 3 + + reset-names: true "#cooling-cells": const: 2 @@ -98,6 +109,36 @@ allOf: properties: compatible: contains: + const: renesas,r9a07g044-mali + then: + properties: + interrupts: + minItems: 4 + interrupt-names: + minItems: 4 + clocks: + minItems: 3 + clock-names: + items: + - const: gpu + - const: bus + - const: bus_ace + resets: + minItems: 3 + reset-names: + items: + - const: rst + - const: axi_rst + - const: ace_rst + required: + - clock-names + - power-domains + - resets + - reset-names + - if: + properties: + compatible: + contains: const: mediatek,mt8183-mali then: properties: diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml index ea643e6c3ef5..f597f73ccd87 100644 --- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml @@ -63,7 +63,6 @@ examples: i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; compatible = "aspeed,ast2500-i2c-bus"; reg = <0x40 0x40>; clocks = <&syscon ASPEED_CLK_APB>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml index 66472f12a7e2..bd67b0766599 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml @@ -31,7 +31,7 @@ examples: #address-cells = <1>; #size-cells = <0>; ak8975@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt deleted file mode 100644 index d4cf10582a26..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt +++ /dev/null @@ -1,80 +0,0 @@ -GPIO-based I2C Bus Mux - -This binding describes an I2C bus multiplexer that uses GPIOs to -route the I2C signals. - - +-----+ +-----+ - | dev | | dev | - +------------+ +-----+ +-----+ - | SoC | | | - | | /--------+--------+ - | +------+ | +------+ child bus A, on GPIO value set to 0 - | | I2C |-|--| Mux | - | +------+ | +--+---+ child bus B, on GPIO value set to 1 - | | | \----------+--------+--------+ - | +------+ | | | | | - | | GPIO |-|-----+ +-----+ +-----+ +-----+ - | +------+ | | dev | | dev | | dev | - +------------+ +-----+ +-----+ +-----+ - -Required properties: -- compatible: i2c-mux-gpio -- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side - port is connected to. -- mux-gpios: list of gpios used to control the muxer -* Standard I2C mux properties. See i2c-mux.yaml in this directory. -* I2C child bus nodes. See i2c-mux.yaml in this directory. - -Optional properties: -- idle-state: value to set the muxer to when idle. When no value is - given, it defaults to the last value used. - -For each i2c child node, an I2C child bus will be created. They will -be numbered based on their order in the device tree. - -Whenever an access is made to a device on a child bus, the value set -in the relevant node's reg property will be output using the list of -GPIOs, the first in the list holding the least-significant value. - -If an idle state is defined, using the idle-state (optional) property, -whenever an access is not being made to a device on a child bus, the -GPIOs will be set according to the idle value. - -If an idle state is not defined, the most recently used value will be -left programmed into hardware whenever no access is being made to a -device on a child bus. - -Example: - i2cmux { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - mux-gpios = <&gpio1 22 0 &gpio1 23 0>; - i2c-parent = <&i2c1>; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7 1>; - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml new file mode 100644 index 000000000000..6e0a5686af04 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based I2C Bus Mux + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +description: | + This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals. + + +-----+ +-----+ + | dev | | dev | + +------------+ +-----+ +-----+ + | SoC | | | + | | /--------+--------+ + | +------+ | +------+ child bus A, on GPIO value set to 0 + | | I2C |-|--| Mux | + | +------+ | +--+---+ child bus B, on GPIO value set to 1 + | | | \----------+--------+--------+ + | +------+ | | | | | + | | GPIO |-|-----+ +-----+ +-----+ +-----+ + | +------+ | | dev | | dev | | dev | + +------------+ +-----+ +-----+ +-----+ + + For each I2C child node, an I2C child bus will be created. They will be numbered based on their + order in the device tree. + + Whenever an access is made to a device on a child bus, the value set in the relevant node's reg + property will be output using the list of GPIOs, the first in the list holding the least- + significant value. + + If an idle state is defined, using the idle-state (optional) property, whenever an access is not + being made to a device on a child bus, the GPIOs will be set according to the idle value. + + If an idle state is not defined, the most recently used value will be left programmed into + hardware whenever no access is being made to a device on a child bus. + +properties: + compatible: + const: i2c-mux-gpio + + i2c-parent: + description: phandle of the I2C bus that this multiplexer's master-side port is connected to + $ref: "/schemas/types.yaml#/definitions/phandle" + + mux-gpios: + description: list of GPIOs used to control the muxer + minItems: 1 + maxItems: 4 # Should be enough + + idle-state: + description: Value to set the muxer to when idle. When no value is given, it defaults to the + last value used. + $ref: "/schemas/types.yaml#/definitions/uint32" + +allOf: + - $ref: i2c-mux.yaml + +unevaluatedProperties: false + +required: + - compatible + - i2c-parent + - mux-gpios + +examples: + - | + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>; + i2c-parent = <&i2c1>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 1>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt deleted file mode 100644 index 997a287ed3f6..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ /dev/null @@ -1,93 +0,0 @@ -Pinctrl-based I2C Bus Mux - -This binding describes an I2C bus multiplexer that uses pin multiplexing to -route the I2C signals, and represents the pin multiplexing configuration -using the pinctrl device tree bindings. - - +-----+ +-----+ - | dev | | dev | - +------------------------+ +-----+ +-----+ - | SoC | | | - | /----|------+--------+ - | +---+ +------+ | child bus A, on first set of pins - | |I2C|---|Pinmux| | - | +---+ +------+ | child bus B, on second set of pins - | \----|------+--------+--------+ - | | | | | - +------------------------+ +-----+ +-----+ +-----+ - | dev | | dev | | dev | - +-----+ +-----+ +-----+ - -Required properties: -- compatible: i2c-mux-pinctrl -- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side - port is connected to. - -Also required are: - -* Standard pinctrl properties that specify the pin mux state for each child - bus. See ../pinctrl/pinctrl-bindings.txt. - -* Standard I2C mux properties. See i2c-mux.yaml in this directory. - -* I2C child bus nodes. See i2c-mux.yaml in this directory. - -For each named state defined in the pinctrl-names property, an I2C child bus -will be created. I2C child bus numbers are assigned based on the index into -the pinctrl-names property. - -The only exception is that no bus will be created for a state named "idle". If -such a state is defined, it must be the last entry in pinctrl-names. For -example: - - pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 - pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) - pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last) - -Whenever an access is made to a device on a child bus, the relevant pinctrl -state will be programmed into hardware. - -If an idle state is defined, whenever an access is not being made to a device -on a child bus, the idle pinctrl state will be programmed into hardware. - -If an idle state is not defined, the most recently used pinctrl state will be -left programmed into hardware whenever no access is being made of a device on -a child bus. - -Example: - - i2cmux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&i2c1>; - - pinctrl-names = "ddc", "pta", "idle"; - pinctrl-0 = <&state_i2cmux_ddc>; - pinctrl-1 = <&state_i2cmux_pta>; - pinctrl-2 = <&state_i2cmux_idle>; - - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom { - compatible = "eeprom"; - reg = <0x50>; - }; - }; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom { - compatible = "eeprom"; - reg = <0x50>; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml new file mode 100644 index 000000000000..2e3d555eb96c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pinctrl-based I2C Bus Mux + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +description: | + This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C + signals, and represents the pin multiplexing configuration using the pinctrl device tree + bindings. + + +-----+ +-----+ + | dev | | dev | + +------------------------+ +-----+ +-----+ + | SoC | | | + | /----|------+--------+ + | +---+ +------+ | child bus A, on first set of pins + | |I2C|---|Pinmux| | + | +---+ +------+ | child bus B, on second set of pins + | \----|------+--------+--------+ + | | | | | + +------------------------+ +-----+ +-----+ +-----+ + | dev | | dev | | dev | + +-----+ +-----+ +-----+ + + For each named state defined in the pinctrl-names property, an I2C child bus will be created. + I2C child bus numbers are assigned based on the index into the pinctrl-names property. + + The only exception is that no bus will be created for a state named "idle". If such a state is + defined, it must be the last entry in pinctrl-names. For example: + + pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 + pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) + pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last) + + Whenever an access is made to a device on a child bus, the relevant pinctrl state will be + programmed into hardware. + + If an idle state is defined, whenever an access is not being made to a device on a child bus, + the idle pinctrl state will be programmed into hardware. + + If an idle state is not defined, the most recently used pinctrl state will be left programmed + into hardware whenever no access is being made of a device on a child bus. + +properties: + compatible: + const: i2c-mux-pinctrl + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the I2C bus that this multiplexer's master-side port is connected + to. + +allOf: + - $ref: i2c-mux.yaml + +unevaluatedProperties: false + +required: + - compatible + - i2c-parent + +examples: + - | + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c1>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt deleted file mode 100644 index ab240e10debc..000000000000 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt +++ /dev/null @@ -1,42 +0,0 @@ -NVIDIA Tegra186 BPMP I2C controller - -In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW -devices, such as the I2C controller for the power management I2C bus. Software -running on other CPUs must perform IPC to the BPMP in order to execute -transactions on that I2C bus. This binding describes an I2C bus that is -accessed in such a fashion. - -The BPMP I2C node must be located directly inside the main BPMP node. See -../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. - -This node represents an I2C controller. See ../i2c/i2c.txt for details of the -core I2C binding. - -Required properties: -- compatible: - Array of strings. - One of: - - "nvidia,tegra186-bpmp-i2c". -- #address-cells: Address cells for I2C device address. - Single-cell integer. - Must be <1>. -- #size-cells: - Single-cell integer. - Must be <0>. -- nvidia,bpmp-bus-id: - Single-cell integer. - Indicates the I2C bus number this DT node represent, as defined by the - BPMP firmware. - -Example: - -bpmp { - ... - - i2c { - compatible = "nvidia,tegra186-bpmp-i2c"; - #address-cells = <1>; - #size-cells = <0>; - nvidia,bpmp-bus-id = <5>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml new file mode 100644 index 000000000000..b8319dcf3d8a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 (and later) BPMP I2C controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + In Tegra186 and later, the BPMP (Boot and Power Management Processor) + owns certain HW devices, such as the I2C controller for the power + management I2C bus. Software running on other CPUs must perform IPC to + the BPMP in order to execute transactions on that I2C bus. This + binding describes an I2C bus that is accessed in such a fashion. + + The BPMP I2C node must be located directly inside the main BPMP node. + See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP + binding. + + This node represents an I2C controller. See ../i2c/i2c.txt for details + of the core I2C binding. + +properties: + compatible: + const: nvidia,tegra186-bpmp-i2c + + nvidia,bpmp-bus-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Indicates the I2C bus number this DT node represents, + as defined by the BPMP firmware. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - nvidia,bpmp-bus-id diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt deleted file mode 100644 index 3f2f990c2e62..000000000000 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ /dev/null @@ -1,87 +0,0 @@ -NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver. - -Required properties: -- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or - "nvidia,tegra20-i2c". For Tegra30, must be "nvidia,tegra30-i2c". - For Tegra114, must be "nvidia,tegra114-i2c". Otherwise, must be - "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is - tegra124, tegra132, or tegra210. - Details of compatible are as follows: - nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C - controller. This only support master mode of I2C communication. Register - interface/offset and interrupts handling are different than generic I2C - controller. Driver of DVC I2C controller is only compatible with - "nvidia,tegra20-i2c-dvc". - nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support - master and slave mode of I2C communication. The i2c-tegra driver only - support master mode of I2C communication. Driver of I2C controller is - only compatible with "nvidia,tegra20-i2c". - nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is - very much similar to Tegra20 I2C controller with additional feature: - Continue Transfer Support. This feature helps to implement M_NO_START - as per I2C core API transfer flags. Driver of I2C controller is - compatible with "nvidia,tegra30-i2c" to enable the continue transfer - support. This is also compatible with "nvidia,tegra20-i2c" without - continue transfer support. - nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is - very much similar to Tegra30 I2C controller with some hardware - modification: - - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and - fast-clk. Tegra114 has only one clock source called as div-clk and - hence clock mechanism is changed in I2C controller. - - Tegra30/Tegra20 I2C controller has enabled per packet transfer by - default and there is no way to disable it. Tegra114 has this - interrupt disable by default and SW need to enable explicitly. - Due to above changes, Tegra114 I2C driver makes incompatible with - previous hardware driver. Hence, tegra114 I2C controller is compatible - with "nvidia,tegra114-i2c". - nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus - and is part of VE power domain and typically used for camera use-cases. - This VI I2C controller is mostly compatible with the programming model - of the regular I2C controllers with a few exceptions. The I2C registers - start at an offset of 0xc00 (instead of 0), registers are 16 bytes - apart (rather than 4) and the controller does not support slave mode. -- reg: Should contain I2C controller registers physical address and length. -- interrupts: Should contain I2C controller interrupts. -- address-cells: Address cells for I2C device address. -- size-cells: Size of the I2C device address. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk - Tegra210: - - div-clk - - slow (only for nvidia,tegra210-i2c-vi compatible node) -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - i2c -- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must - include venc powergate node as vi i2c is part of VE power domain. - tegra210-i2c-vi: - - pd_venc -- dmas: Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names: Must include the following entries: - - rx - - tx - -Example: - - i2c@7000c000 { - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 124>; - clock-names = "div-clk", "fast-clk"; - resets = <&tegra_car 12>; - reset-names = "i2c"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml new file mode 100644 index 000000000000..424a4fc218b6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +title: NVIDIA Tegra I2C controller driver + +properties: + compatible: + oneOf: + - description: Tegra20 has 4 generic I2C controller. This can support + master and slave mode of I2C communication. The i2c-tegra driver + only support master mode of I2C communication. Driver of I2C + controller is only compatible with "nvidia,tegra20-i2c". + const: nvidia,tegra20-i2c + - description: Tegra20 has specific I2C controller called as DVC I2C + controller. This only support master mode of I2C communication. + Register interface/offset and interrupts handling are different than + generic I2C controller. Driver of DVC I2C controller is only + compatible with "nvidia,tegra20-i2c-dvc". + const: nvidia,tegra20-i2c-dvc + - description: | + Tegra30 has 5 generic I2C controller. This controller is very much + similar to Tegra20 I2C controller with additional feature: Continue + Transfer Support. This feature helps to implement M_NO_START as per + I2C core API transfer flags. Driver of I2C controller is compatible + with "nvidia,tegra30-i2c" to enable the continue transfer support. + This is also compatible with "nvidia,tegra20-i2c" without continue + transfer support. + items: + - const: nvidia,tegra30-i2c + - const: nvidia,tegra20-i2c + - description: | + Tegra114 has 5 generic I2C controllers. This controller is very much + similar to Tegra30 I2C controller with some hardware modification: + - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk + and fast-clk. Tegra114 has only one clock source called as + div-clk and hence clock mechanism is changed in I2C controller. + - Tegra30/Tegra20 I2C controller has enabled per packet transfer + by default and there is no way to disable it. Tegra114 has this + interrupt disable by default and SW need to enable explicitly. + Due to above changes, Tegra114 I2C driver makes incompatible with + previous hardware driver. Hence, Tegra114 I2C controller is + compatible with "nvidia,tegra114-i2c". + const: nvidia,tegra114-i2c + - description: | + Tegra124 has 6 generic I2C controllers. These controllers are very + similar to those found on Tegra114 but also contain several hardware + improvements and new registers. + const: nvidia,tegra124-i2c + - description: | + Tegra210 has 6 generic I2C controllers. These controllers are very + similar to those found on Tegra124. + items: + - const: nvidia,tegra210-i2c + - const: nvidia,tegra124-i2c + - description: | + Tegra210 has one I2C controller that is on host1x bus and is part of + the VE power domain and typically used for camera use-cases. This VI + I2C controller is mostly compatible with the programming model of + the regular I2C controllers with a few exceptions. The I2C registers + start at an offset of 0xc00 (instead of 0), registers are 16 bytes + apart (rather than 4) and the controller does not support slave + mode. + const: nvidia,tegra210-i2c-vi + - description: | + Tegra186 has 9 generic I2C controllers, two of which are in the AON + (always-on) partition of the SoC. All of these controllers are very + similar to those found on Tegra210. + const: nvidia,tegra186-i2c + - description: | + Tegra194 has 8 generic I2C controllers, two of which are in the AON + (always-on) partition of the SoC. All of these controllers are very + similar to those found on Tegra186. However, these controllers have + support for 64 KiB transactions whereas earlier chips supported no + more than 4 KiB per transactions. + const: nvidia,tegra194-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: i2c + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-i2c + - nvidia,tegra30-i2c + then: + properties: + clock-names: + items: + - const: div-clk + - const: fast-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra114-i2c + then: + properties: + clock-names: + items: + - const: div-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-i2c + then: + properties: + clock-names: + items: + - const: div-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-i2c-vi + then: + properties: + clock-names: + items: + - const: div-clk + - const: slow + power-domains: + items: + - description: phandle to the VENC power domain + +unevaluatedProperties: false + +examples: + - | + i2c@7000c000 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + clocks = <&tegra_car 12>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index c07289a643d8..46b62e1c9273 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -112,6 +112,9 @@ examples: clocks = <&rcc 0 149>; }; + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> //Example 2 (with st,stm32f7-i2c compatible) i2c@40005800 { compatible = "st,stm32f7-i2c"; @@ -124,6 +127,9 @@ examples: clocks = <&rcc 1 CLK_I2C1>; }; + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> //Example 3 (with st,stm32mp15-i2c compatible on stm32mp) #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml index 7e2accc3d5ce..d1a6103fc37a 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -61,7 +61,7 @@ examples: #size-cells = <0>; magnetometer@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index edbc2921aabd..d69595a524c1 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -95,7 +95,7 @@ examples: #address-cells = <1>; #size-cells = <0>; magnetometer@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; }; }; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml index 4b0ef1ef5445..9438fffaf0ba 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml @@ -96,7 +96,7 @@ examples: vdd-supply = <&ldo1_reg>; iovdd-supply = <&ldo2_reg>; reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; - interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 0f79d9a01c49..722781aa4697 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -448,17 +448,17 @@ examples: reg = <20>; adi,sensor-type = <9>; //custom thermocouple adi,single-ended; - adi,custom-thermocouple = /bits/ 64 - <(-50220000) 0>, - <(-30200000) 99100000>, - <(-5300000) 135400000>, - <0 273150000>, - <40200000 361200000>, - <55300000 522100000>, - <88300000 720300000>, - <132200000 811200000>, - <188700000 922500000>, - <460400000 1000000000>; //10 pairs + adi,custom-thermocouple = + /bits/ 64 <(-50220000) 0>, + /bits/ 64 <(-30200000) 99100000>, + /bits/ 64 <(-5300000) 135400000>, + /bits/ 64 <0 273150000>, + /bits/ 64 <40200000 361200000>, + /bits/ 64 <55300000 522100000>, + /bits/ 64 <88300000 720300000>, + /bits/ 64 <132200000 811200000>, + /bits/ 64 <188700000 922500000>, + /bits/ 64 <460400000 1000000000>; //10 pairs }; }; diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt deleted file mode 100644 index 88c775a3fe21..000000000000 --- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt +++ /dev/null @@ -1,66 +0,0 @@ -* PWM vibrator device tree bindings - -Registers a PWM device as vibrator. It is expected, that the vibrator's -strength increases based on the duty cycle of the enable PWM channel -(100% duty cycle meaning strongest vibration, 0% meaning no vibration). - -The binding supports an optional direction PWM channel, that can be -driven at fixed duty cycle. If available this is can be used to increase -the vibration effect of some devices. - -Required properties: -- compatible: should contain "pwm-vibrator" -- pwm-names: Should contain "enable" and optionally "direction" -- pwms: Should contain a PWM handle for each entry in pwm-names - -Optional properties: -- vcc-supply: Phandle for the regulator supplying power -- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in - nanoseconds, defaults to 50% of the channel's - period. - -Example from Motorola Droid 4: - -&omap4_pmx_core { - vibrator_direction_pin: pinmux_vibrator_direction_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: pinmux_vibrator_enable_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; -}; - -/ { - pwm8: dmtimer-pwm { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: dmtimer-pwm { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 1000000000 0>, - <&pwm8 0 1000000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <1000000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml new file mode 100644 index 000000000000..a70a636ee112 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: PWM vibrator + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: > + Registers a PWM device as vibrator. It is expected, that the vibrator's + strength increases based on the duty cycle of the enable PWM channel + (100% duty cycle meaning strongest vibration, 0% meaning no vibration). + + The binding supports an optional direction PWM channel, that can be + driven at fixed duty cycle. If available this is can be used to increase + the vibration effect of some devices. + +properties: + compatible: + const: pwm-vibrator + + pwm-names: + items: + - const: enable + - const: direction + minItems: 1 + + pwms: + minItems: 1 + maxItems: 2 + + vcc-supply: true + + direction-duty-cycle-ns: + description: > + Duty cycle of the direction PWM channel in nanoseconds, + defaults to 50% of the channel's period. + +required: + - compatible + - pwm-names + - pwms + +additionalProperties: false + +examples: + - | + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 1000000000 0>, + <&pwm8 0 1000000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <1000000000>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index c84f9fe7f254..cfb3ec27bd2b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -239,6 +239,7 @@ examples: }; }; + - | interrupt-controller@2c010000 { compatible = "arm,gic-v3"; #interrupt-cells = <4>; @@ -254,7 +255,7 @@ examples: <0x2c040000 0x2000>, // GICC <0x2c060000 0x2000>, // GICH <0x2c080000 0x2000>; // GICV - interrupts = <1 9 4>; + interrupts = <1 9 4 0>; msi-controller@2c200000 { compatible = "arm,gic-v3-its"; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt deleted file mode 100644 index 37aea40d5430..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom BCM3380-style Level 1 / Level 2 interrupt controller - -This interrupt controller shows up in various forms on many BCM338x/BCM63xx -chipsets. It has the following properties: - -- outputs a single interrupt signal to its interrupt controller parent - -- contains one or more enable/status word pairs, which often appear at - different offsets in different blocks - -- no atomic set/clear operations - -Required properties: - -- compatible: should be "brcm,bcm3380-l2-intc" -- reg: specifies one or more enable/status pairs, in the following format: - <enable_reg 0x4 status_reg 0x4>... -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- interrupts: specifies the interrupt line in the interrupt-parent controller - node, valid values depend on the type of parent interrupt controller - -Optional properties: - -- brcm,irq-can-wake: if present, this means the L2 controller can be used as a - wakeup source for system suspend/resume. - -Example: - -irq0_intc: interrupt-controller@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4 0x1000002c 0x4>, - <0x10000020 0x4 0x10000028 0x4>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&cpu_intc>; - interrupts = <2>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt deleted file mode 100644 index 5ddef1dc0c1a..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt +++ /dev/null @@ -1,61 +0,0 @@ -Broadcom BCM7038-style Level 1 interrupt controller - -This block is a first level interrupt controller that is typically connected -directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip -since BCM7038 has contained this hardware. - -Key elements of the hardware design include: - -- 64, 96, 128, or 160 incoming level IRQ lines - -- Most onchip peripherals are wired directly to an L1 input - -- A separate instance of the register set for each CPU, allowing individual - peripheral IRQs to be routed to any CPU - -- Atomic mask/unmask operations - -- No polarity/level/edge settings - -- No FIFO or priority encoder logic; software is expected to read all - 2-5 status words to determine which IRQs are pending - -Required properties: - -- compatible: should be "brcm,bcm7038-l1-intc" -- reg: specifies the base physical address and size of the registers; - the number of supported IRQs is inferred from the size argument -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller - node; valid values depend on the type of parent interrupt controller - -Optional properties: - -- brcm,irq-can-wake: If present, this means the L1 controller can be used as a - wakeup source for system suspend/resume. - -Optional properties: - -- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts - have already been configured by the firmware and should be left unmanaged. - This should have one 32-bit word per status/set/clear/mask group. - -If multiple reg ranges and interrupt-parent entries are present on an SMP -system, the driver will allow IRQ SMP affinity to be set up through the -/proc/irq/ interface. In the simplest possible configuration, only one -reg range and one interrupt-parent is needed. - -Example: - -periph_intc: periph_intc@1041a400 { - compatible = "brcm,bcm7038-l1-intc"; - reg = <0x1041a400 0x30 0x1041a600 0x30>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpu_intc>; - interrupts = <2>, <3>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml new file mode 100644 index 000000000000..5ecb6faa70dc --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7038-style Level 1 interrupt controller + +description: > + This block is a first level interrupt controller that is typically connected + directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip + since BCM7038 has contained this hardware. + + Key elements of the hardware design include: + + - 64, 96, 128, or 160 incoming level IRQ lines + + - Most onchip peripherals are wired directly to an L1 input + + - A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + + - Atomic mask/unmask operations + + - No polarity/level/edge settings + + - No FIFO or priority encoder logic; software is expected to read all + 2-5 status words to determine which IRQs are pending + + If multiple reg ranges and interrupt-parent entries are present on an SMP + system, the driver will allow IRQ SMP affinity to be set up through the + /proc/irq/ interface. In the simplest possible configuration, only one + reg range and one interrupt-parent is needed. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: brcm,bcm7038-l1-intc + + reg: + description: > + Specifies the base physical address and size of the registers + the number of supported IRQs is inferred from the size argument + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + description: > + Specifies the interrupt line(s) in the interrupt-parent controller node; + valid values depend on the type of parent interrupt controller + + brcm,irq-can-wake: + type: boolean + description: > + If present, this means the L1 controller can be used as a + wakeup source for system suspend/resume. + + brcm,int-fwd-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + If present, a bit mask to indicate which interrupts have already been + configured by the firmware and should be left unmanaged. This should + have one 32-bit word per status/set/clear/mask group. + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + periph_intc: interrupt-controller@1041a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x1041a400 0x30>, <0x1041a600 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt deleted file mode 100644 index addd86b6ca2f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt +++ /dev/null @@ -1,88 +0,0 @@ -Broadcom BCM7120-style Level 2 interrupt controller - -This interrupt controller hardware is a second level interrupt controller that -is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based -platforms. It can be found on BCM7xxx products starting with BCM7120. - -Such an interrupt controller has the following hardware design: - -- outputs multiple interrupts signals towards its interrupt controller parent - -- controls how some of the interrupts will be flowing, whether they will - directly output an interrupt signal towards the interrupt controller parent, - or if they will output an interrupt signal at this 2nd level interrupt - controller, in particular for UARTs - -- has one 32-bit enable word and one 32-bit status word - -- no atomic set/clear operations - -- not all bits within the interrupt controller actually map to an interrupt - -The typical hardware layout for this controller is represented below: - -2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) - -0 -----[ MUX ] ------------|==========> GIC interrupt 75 - \-----------\ - | -1 -----[ MUX ] --------)---|==========> GIC interrupt 76 - \------------| - | -2 -----[ MUX ] --------)---|==========> GIC interrupt 77 - \------------| - | -3 ---------------------| -4 ---------------------| -5 ---------------------| -7 ---------------------|---|===========> GIC interrupt 66 -9 ---------------------| -10 --------------------| -11 --------------------/ - -6 ------------------------\ - |===========> GIC interrupt 64 -8 ------------------------/ - -12 ........................ X -13 ........................ X (not connected) -.. -31 ........................ X - -Required properties: - -- compatible: should be "brcm,bcm7120-l2-intc" -- reg: specifies the base physical address and size of the registers -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller - node, valid values depend on the type of parent interrupt controller -- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts - are wired to this 2nd level interrupt controller, and how they match their - respective interrupt parents. Should match exactly the number of interrupts - specified in the 'interrupts' property. - -Optional properties: - -- brcm,irq-can-wake: if present, this means the L2 controller can be used as a - wakeup source for system suspend/resume. - -- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which - have a mux gate, typically UARTs. Setting these bits will make their - respective interrupt outputs bypass this 2nd level interrupt controller - completely; it is completely transparent for the interrupt controller - parent. This should have one 32-bit word per enable/status pair. - -Example: - -irq0_intc: interrupt-controller@f0406800 { - compatible = "brcm,bcm7120-l2-intc"; - interrupt-parent = <&intc>; - #interrupt-cells = <1>; - reg = <0xf0406800 0x8>; - interrupt-controller; - interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; - brcm,int-map-mask = <0xeb8>, <0x140>; - brcm,int-fwd-mask = <0x7>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml new file mode 100644 index 000000000000..46b2eb3c43ee --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2 + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: > + This interrupt controller hardware is a second level interrupt controller that + is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based + platforms. It can be found on BCM7xxx products starting with BCM7120. + + Such an interrupt controller has the following hardware design: + + - outputs multiple interrupts signals towards its interrupt controller parent + + - controls how some of the interrupts will be flowing, whether they will + directly output an interrupt signal towards the interrupt controller parent, + or if they will output an interrupt signal at this 2nd level interrupt + controller, in particular for UARTs + + - has one 32-bit enable word and one 32-bit status word + + - no atomic set/clear operations + + - not all bits within the interrupt controller actually map to an interrupt + + The typical hardware layout for this controller is represented below: + + 2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) + + 0 -----[ MUX ] ------------|==========> GIC interrupt 75 + \-----------\ + | + 1 -----[ MUX ] --------)---|==========> GIC interrupt 76 + \------------| + | + 2 -----[ MUX ] --------)---|==========> GIC interrupt 77 + \------------| + | + 3 ---------------------| + 4 ---------------------| + 5 ---------------------| + 7 ---------------------|---|===========> GIC interrupt 66 + 9 ---------------------| + 10 --------------------| + 11 --------------------/ + + 6 ------------------------\ + |===========> GIC interrupt 64 + 8 ------------------------/ + + 12 ........................ X + 13 ........................ X (not connected) + .. + 31 ........................ X + + The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms + on many BCM338x/BCM63xx chipsets. It has the following properties: + + - outputs a single interrupt signal to its interrupt controller parent + + - contains one or more enable/status word pairs, which often appear at + different offsets in different blocks + + - no atomic set/clear operations + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm7120-l2-intc + - brcm,bcm3380-l2-intc + + reg: + minItems: 1 + maxItems: 4 + description: > + Specifies the base physical address and size of the registers + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + minItems: 1 + maxItems: 32 + + brcm,int-map-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: > + 32-bits bit mask describing how many and which interrupts are wired to + this 2nd level interrupt controller, and how they match their respective + interrupt parents. Should match exactly the number of interrupts + specified in the 'interrupts' property. + + brcm,irq-can-wake: + type: boolean + description: > + If present, this means the L2 controller can be used as a wakeup source + for system suspend/resume. + + brcm,int-fwd-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + if present, a bit mask to configure the interrupts which have a mux gate, + typically UARTs. Setting these bits will make their respective interrupt + outputs bypass this 2nd level interrupt controller completely; it is + completely transparent for the interrupt controller parent. This should + have one 32-bit word per enable/status pair. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +examples: + - | + irq0_intc: interrupt-controller@f0406800 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&intc>; + #interrupt-cells = <1>; + reg = <0xf0406800 0x8>; + interrupt-controller; + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; + brcm,int-map-mask = <0xeb8>, <0x140>; + brcm,int-fwd-mask = <0x7>; + }; + + - | + irq1_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4>, <0x1000002c 0x4>, + <0x10000020 0x4>, <0x10000028 0x4>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt deleted file mode 100644 index 021cf822395c..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +++ /dev/null @@ -1,31 +0,0 @@ -Broadcom Generic Level 2 Interrupt Controller - -Required properties: - -- compatible: should be one of: - "brcm,hif-spi-l2-intc" or - "brcm,upg-aux-aon-l2-intc" or - "brcm,l2-intc" for latched interrupt controllers - should be "brcm,bcm7271-l2-intc" for level interrupt controllers -- reg: specifies the base physical address and size of the registers -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. Should be 1. -- interrupts: specifies the interrupt line in the interrupt-parent irq space - to be used for cascading - -Optional properties: - -- brcm,irq-can-wake: If present, this means the L2 controller can be used as a - wakeup source for system suspend/resume. - -Example: - -hif_intr2_intc: interrupt-controller@f0441000 { - compatible = "brcm,l2-intc"; - reg = <0xf0441000 0x30>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&intc>; - interrupts = <0x0 0x20 0x0>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml new file mode 100644 index 000000000000..8961afca96f1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Generic Level 2 Interrupt Controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,hif-spi-l2-intc + - brcm,upg-aux-aon-l2-intc + - const: brcm,l2-intc + - items: + - enum: + - brcm,bcm2711-l2-intc + - const: brcm,l2-intc + - items: + - const: brcm,bcm7271-l2-intc + - items: + - const: brcm,l2-intc + + reg: + maxItems: 1 + description: > + Specifies the base physical address and size of the registers + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + brcm,irq-can-wake: + type: boolean + description: > + If present, this means the L2 controller can be used as a wakeup source + for system suspend/resume. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +examples: + - | + hif_intr2_intc: interrupt-controller@f0441000 { + compatible = "brcm,l2-intc"; + reg = <0xf0441000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x20 0x0>; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt deleted file mode 100644 index a555d94084b7..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ /dev/null @@ -1,319 +0,0 @@ -LEDs connected to Broadcom BCM6328 controller - -This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. -In these SoCs it's possible to control LEDs both as GPIOs or by hardware. -However, on some devices there are Serial LEDs (LEDs connected to a 74x164 -controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), -or by hardware using this driver. -Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and -exporting the 74x164 as spi-gpio prevents those LEDs to be hardware -controlled, so the only chance to keep them working is by using this driver. - -BCM6328 LED controller has a HWDIS register, which controls whether a LED -should be controlled by a hardware signal instead of the MODE register value, -with 0 meaning hardware control enabled and 1 hardware control disabled. This -is usually 1:1 for hardware to LED signals, but through the activity/link -registers you have some limited control over rerouting the LEDs (as -explained later in brcm,link-signal-sources). Even if a LED is hardware -controlled you are still able to make it blink or light it up if it isn't, -but you can't turn it off if the hardware decides to light it up. For this -reason, hardware controlled LEDs aren't registered as LED class devices. - -Required properties: - - compatible : should be "brcm,bcm6328-leds". - - #address-cells : must be 1. - - #size-cells : must be 0. - - reg : BCM6328 LED controller address and size. - -Optional properties: - - brcm,serial-leds : Boolean, enables Serial LEDs. - Default : false - - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing. - Default : false - - brcm,serial-clk-low : Boolean, makes clock signal active low. - Default : false - - brcm,serial-dat-low : Boolean, makes data signal active low. - Default : false - - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction. - Default : false - -Each LED is represented as a sub-node of the brcm,bcm6328-leds device. - -LED sub-node required properties: - - reg : LED pin number (only LEDs 0 to 23 are valid). - -LED sub-node optional properties: - a) Optional properties for sub-nodes related to software controlled LEDs: - - label : see Documentation/devicetree/bindings/leds/common.txt - - active-low : Boolean, makes LED active low. - Default : false - - default-state : see - Documentation/devicetree/bindings/leds/common.txt - - linux,default-trigger : see - Documentation/devicetree/bindings/leds/common.txt - - b) Optional properties for sub-nodes related to hardware controlled LEDs: - - brcm,hardware-controlled : Boolean, makes this LED hardware controlled. - Default : false - - brcm,link-signal-sources : An array of hardware link - signal sources. Up to four link hardware signals can get muxed into - these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may - be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs - 4 to 7. A signal can be muxed to more than one LED, and one LED can - have more than one source signal. - - brcm,activity-signal-sources : An array of hardware activity - signal sources. Up to four activity hardware signals can get muxed into - these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may - be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs - 4 to 7. A signal can be muxed to more than one LED, and one LED can - have more than one source signal. - -Examples: -Scenario 1 : BCM6328 with 4 EPHY LEDs - leds0: led-controller@10000800 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10000800 0x24>; - - alarm_red@2 { - reg = <2>; - active-low; - label = "red:alarm"; - }; - inet_green@3 { - reg = <3>; - active-low; - label = "green:inet"; - }; - power_green@4 { - reg = <4>; - active-low; - label = "green:power"; - default-state = "on"; - }; - ephy0_spd@17 { - reg = <17>; - brcm,hardware-controlled; - }; - ephy1_spd@18 { - reg = <18>; - brcm,hardware-controlled; - }; - ephy2_spd@19 { - reg = <19>; - brcm,hardware-controlled; - }; - ephy3_spd@20 { - reg = <20>; - brcm,hardware-controlled; - }; - }; - -Scenario 2 : BCM63268 with Serial/GPHY0 LEDs - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - brcm,serial-leds; - brcm,serial-dat-low; - brcm,serial-shift-inv; - - gphy0_spd0@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - }; - gphy0_spd1@1 { - reg = <1>; - brcm,hardware-controlled; - brcm,link-signal-sources = <1>; - }; - inet_red@2 { - reg = <2>; - active-low; - label = "red:inet"; - }; - dsl_green@3 { - reg = <3>; - active-low; - label = "green:dsl"; - }; - usb_green@4 { - reg = <4>; - active-low; - label = "green:usb"; - }; - wps_green@7 { - reg = <7>; - active-low; - label = "green:wps"; - }; - inet_green@8 { - reg = <8>; - active-low; - label = "green:inet"; - }; - ephy0_act@9 { - reg = <9>; - brcm,hardware-controlled; - }; - ephy1_act@10 { - reg = <10>; - brcm,hardware-controlled; - }; - ephy2_act@11 { - reg = <11>; - brcm,hardware-controlled; - }; - gphy0_act@12 { - reg = <12>; - brcm,hardware-controlled; - }; - ephy0_spd@13 { - reg = <13>; - brcm,hardware-controlled; - }; - ephy1_spd@14 { - reg = <14>; - brcm,hardware-controlled; - }; - ephy2_spd@15 { - reg = <15>; - brcm,hardware-controlled; - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 3 : BCM6362 with 1 LED for each EPHY - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - brcm,activity-signal-sources = <0>; - /* USB link/activity routed to USB LED */ - }; - inet@1 { - reg = <1>; - brcm,hardware-controlled; - brcm,activity-signal-sources = <1>; - /* INET activity routed to INET LED */ - }; - ephy0@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4>; - /* EPHY0 link routed to EPHY0 LED */ - }; - ephy1@5 { - reg = <5>; - brcm,hardware-controlled; - brcm,link-signal-sources = <5>; - /* EPHY1 link routed to EPHY1 LED */ - }; - ephy2@6 { - reg = <6>; - brcm,hardware-controlled; - brcm,link-signal-sources = <6>; - /* EPHY2 link routed to EPHY2 LED */ - }; - ephy3@7 { - reg = <7>; - brcm,hardware-controlled; - brcm,link-signal-sources = <7>; - /* EPHY3 link routed to EPHY3 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 4 : BCM6362 with 1 LED for all EPHYs - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0 1>; - brcm,activity-signal-sources = <0 1>; - /* USB/INET link/activity routed to USB LED */ - }; - ephy@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4 5 6 7>; - /* EPHY0/1/2/3 link routed to EPHY0 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 5 : BCM6362 with EPHY LEDs swapped - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - brcm,activity-signal-sources = <0 1>; - /* USB link/act and INET act routed to USB LED */ - }; - ephy0@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <7>; - /* EPHY3 link routed to EPHY0 LED */ - }; - ephy1@5 { - reg = <5>; - brcm,hardware-controlled; - brcm,link-signal-sources = <6>; - /* EPHY2 link routed to EPHY1 LED */ - }; - ephy2@6 { - reg = <6>; - brcm,hardware-controlled; - brcm,link-signal-sources = <5>; - /* EPHY1 link routed to EPHY2 LED */ - }; - ephy3@7 { - reg = <7>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4>; - /* EPHY0 link routed to EPHY3 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml new file mode 100644 index 000000000000..51cc0d82c12e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml @@ -0,0 +1,404 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to Broadcom BCM6328 controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + +description: | + This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. + In these SoCs it's possible to control LEDs both as GPIOs or by hardware. + However, on some devices there are Serial LEDs (LEDs connected to a 74x164 + controller), which can either be controlled by software (exporting the 74x164 + as spi-gpio. See + Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware + using this driver. + Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and + exporting the 74x164 as spi-gpio prevents those LEDs to be hardware + controlled, so the only chance to keep them working is by using this driver. + + BCM6328 LED controller has a HWDIS register, which controls whether a LED + should be controlled by a hardware signal instead of the MODE register value, + with 0 meaning hardware control enabled and 1 hardware control disabled. This + is usually 1:1 for hardware to LED signals, but through the activity/link + registers you have some limited control over rerouting the LEDs (as + explained later in brcm,link-signal-sources). Even if a LED is hardware + controlled you are still able to make it blink or light it up if it isn't, + but you can't turn it off if the hardware decides to light it up. For this + reason, hardware controlled LEDs aren't registered as LED class devices. + + Each LED is represented as a sub-node of the brcm,bcm6328-leds device. + +properties: + compatible: + const: brcm,bcm6328-leds + + reg: + maxItems: 1 + + brcm,serial-leds: + type: boolean + description: Enables Serial LEDs. + + brcm,serial-mux: + type: boolean + description: Enables Serial LEDs multiplexing. + + brcm,serial-clk-low: + type: boolean + description: Makes clock signal active low. + + brcm,serial-dat-low: + type: boolean + description: Makes data signal active low. + + brcm,serial-shift-inv: + type: boolean + description: Inverts Serial LEDs shift direction. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[a-f0-9]+$": + type: object + + $ref: common.yaml# + + properties: + reg: + items: + - maximum: 23 + description: LED pin number (only LEDs 0 to 23 are valid). + + active-low: + type: boolean + description: Makes LED active low. + + brcm,hardware-controlled: + type: boolean + description: Makes this LED hardware controlled. + + brcm,link-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware link signal sources. Up to four link hardware + signals can get muxed into these LEDs. Only valid for LEDs 0 to 7, + where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to + 7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one + LED, and one LED can have more than one source signal. + + brcm,activity-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware activity signal sources. Up to four activity + hardware signals can get muxed into these LEDs. Only valid for LEDs 0 + to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and + signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to + more than one LED, and one LED can have more than one source signal. + + required: + - reg + + unevaluatedProperties: false + +required: + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + /* BCM6328 with 4 EPHY LEDs */ + led-controller@10000800 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000800 0x24>; + + alarm_red@2 { + reg = <2>; + active-low; + label = "red:alarm"; + }; + + inet_green@3 { + reg = <3>; + active-low; + label = "green:inet"; + }; + + power_green@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; + + ephy1_spd@18 { + reg = <18>; + brcm,hardware-controlled; + }; + + ephy2_spd@19 { + reg = <19>; + brcm,hardware-controlled; + }; + + ephy3_spd@20 { + reg = <20>; + brcm,hardware-controlled; + }; + }; + - | + /* BCM63268 with Serial/GPHY0 LEDs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + gphy0_spd0@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + }; + + gphy0_spd1@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,link-signal-sources = <1>; + }; + + inet_red@2 { + reg = <2>; + active-low; + label = "red:inet"; + }; + + dsl_green@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + + usb_green@4 { + reg = <4>; + active-low; + label = "green:usb"; + }; + + wps_green@7 { + reg = <7>; + active-low; + label = "green:wps"; + }; + + inet_green@8 { + reg = <8>; + active-low; + label = "green:inet"; + }; + + ephy0_act@9 { + reg = <9>; + brcm,hardware-controlled; + }; + + ephy1_act@10 { + reg = <10>; + brcm,hardware-controlled; + }; + + ephy2_act@11 { + reg = <11>; + brcm,hardware-controlled; + }; + + gphy0_act@12 { + reg = <12>; + brcm,hardware-controlled; + }; + + ephy0_spd@13 { + reg = <13>; + brcm,hardware-controlled; + }; + + ephy1_spd@14 { + reg = <14>; + brcm,hardware-controlled; + }; + + ephy2_spd@15 { + reg = <15>; + brcm,hardware-controlled; + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for each EPHY */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0>; + /* USB link/activity routed to USB LED */ + }; + + inet@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,activity-signal-sources = <1>; + /* INET activity routed to INET LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for all EPHYs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0 1>; + brcm,activity-signal-sources = <0 1>; + /* USB/INET link/activity routed to USB LED */ + }; + + ephy@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4 5 6 7>; + /* EPHY0/1/2/3 link routed to EPHY0 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with EPHY LEDs swapped */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0 1>; + /* USB link/act and INET act routed to USB LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml index e864d798168d..d433e496ec6e 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -180,15 +180,6 @@ allOf: compatible: enum: - ti,am654-mailbox - then: - required: - - interrupt-parent - - - if: - properties: - compatible: - enum: - - ti,am654-mailbox - ti,am64-mailbox then: properties: diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml new file mode 100644 index 000000000000..444f24838d3d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility + +maintainers: + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: | + The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI + CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to + simultaneously transmit bidirectional control-channel data while forward + video transmissions are in progress. The MAX96712 can accommodate as many as + four remotely located sensors using industry-standard coax or STP + interconnects. + + Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the + forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the + MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 + serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode. + +properties: + compatible: + const: maxim,max96712 + + reg: + description: I2C device address + maxItems: 1 + + enable-gpios: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 2 + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 3 + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + required: + - port@4 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6508000>; + + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml index 64dc9d398d9a..e188a4bf755c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -129,11 +129,8 @@ patternProperties: The child device node represents the device connected to the GPMC bus. The device can be a NAND chip, SRAM device, NOR device or an ASIC. + $ref: "ti,gpmc-child.yaml" - allOf: - - $ref: "ti,gpmc-child.yaml" - - unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml index 499c62c04daa..5dce62a7eff2 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -221,7 +221,6 @@ required: - '#gpio-cells' - interrupt-controller - '#interrupt-cells' - - interrupt-parent - interrupts - AVDD-supply - DBVDD1-supply diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml index 1626e0a821b0..d30fada2ac39 100644 --- a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml +++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml @@ -51,6 +51,10 @@ properties: description: Phandle to the device containing custom config. + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 407586bc366b..6a4831fd3616 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -122,6 +122,7 @@ allOf: mdio-mux: type: object + unevaluatedProperties: false properties: compatible: @@ -132,17 +133,18 @@ allOf: description: Phandle to EMAC MDIO. + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + mdio@1: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: Internal MDIO Bus properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - compatible: const: allwinner,sun8i-h3-mdio-internal @@ -168,16 +170,11 @@ allOf: mdio@2: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: External MDIO Bus (H3 only) properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: const: 2 diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt deleted file mode 100644 index 0120ebe93262..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ /dev/null @@ -1,30 +0,0 @@ -Broadcom AMAC Ethernet Controller Device Tree Bindings -------------------------------------------------------------- - -Required properties: - - compatible: "brcm,amac" - "brcm,nsp-amac" - "brcm,ns2-amac" - - reg: Address and length of the register set for the device. It - contains the information of registers in the same order as - described by reg-names - - reg-names: Names of the registers. - "amac_base": Address and length of the GMAC registers - "idm_base": Address and length of the GMAC IDM registers - (required for NSP and Northstar2) - "nicpm_base": Address and length of the NIC Port Manager - registers (required for Northstar2) - - interrupts: Interrupt number - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Examples: - -amac0: ethernet@18022000 { - compatible = "brcm,nsp-amac"; - reg = <0x18022000 0x1000>, - <0x18110000 0x1000>; - reg-names = "amac_base", "idm_base"; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml new file mode 100644 index 000000000000..8f031932c8af --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,amac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom AMAC Ethernet Controller Device Tree Bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - brcm,amac + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-amac + then: + properties: + reg: + minItems: 2 + maxItems: 2 + reg-names: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-amac + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + +properties: + compatible: + enum: + - brcm,amac + - brcm,nsp-amac + - brcm,ns2-amac + + interrupts: + maxItems: 1 + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: amac_base + - const: idm_base + - const: nicpm_base + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + amac0: ethernet@18022000 { + compatible = "brcm,nsp-amac"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml index 2f34fda55fd0..9ef28c2a0afc 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml @@ -15,18 +15,12 @@ description: properties as well to generate desired MDIO transaction on appropriate bus. allOf: - - $ref: "mdio.yaml#" + - $ref: mdio-mux.yaml# properties: compatible: const: brcm,bcm6368-mdio-mux - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: maxItems: 1 @@ -34,24 +28,6 @@ required: - compatible - reg -patternProperties: - '^mdio@[0-1]$': - type: object - properties: - reg: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - reg - - "#address-cells" - - "#size-cells" - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt deleted file mode 100644 index 0b5994fba35f..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ /dev/null @@ -1,125 +0,0 @@ -* Broadcom BCM7xxx Ethernet Controller (GENET) - -Required properties: -- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2", - "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or - "brcm,bcm7712-genet-v5". -- reg: address and length of the register set for the device -- interrupts and/or interrupts-extended: must be two cells, the first cell - is the general purpose interrupt line, while the second cell is the - interrupt for the ring RX and TX queues operating in ring mode. An - optional third interrupt cell for Wake-on-LAN can be specified. - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - for information on the property specifics. -- phy-mode: see ethernet.txt file in the same directory -- #address-cells: should be 1 -- #size-cells: should be 1 - -Optional properties: -- clocks: When provided, must be two phandles to the functional clocks nodes - of the GENET block. The first phandle is the main GENET clock used during - normal operation, while the second phandle is the Wake-on-LAN clock. -- clock-names: When provided, names of the functional clock phandles, first - name should be "enet" and second should be "enet-wol". - -- phy-handle: See ethernet.txt file in the same directory; used to describe - configurations where a PHY (internal or external) is used. - -- fixed-link: When the GENET interface is connected to a MoCA hardware block or - when operating in a RGMII to RGMII type of connection, or when the MDIO bus is - voluntarily disabled, this property should be used to describe the "fixed link". - See Documentation/devicetree/bindings/net/fixed-link.txt for information on - the property specifics - -Required child nodes: - -- mdio bus node: this node should always be present regardless of the PHY - configuration of the GENET instance - -MDIO bus node required properties: - -- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2" - "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version - has to match the parent node compatible property (e.g: brcm,genet-v4 pairs - with brcm,genet-mdio-v4) -- reg: address and length relative to the parent node base register address -- #address-cells: address cell for MDIO bus addressing, should be 1 -- #size-cells: size of the cells for MDIO bus addressing, should be 0 - -Ethernet PHY node properties: - -See Documentation/devicetree/bindings/net/phy.txt for the list of required and -optional properties. - -Internal Gigabit PHY example: - -ethernet@f0b60000 { - phy-mode = "internal"; - phy-handle = <&phy1>; - mac-address = [ 00 10 18 36 23 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b60000 0xfc4c>; - interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy1: ethernet-phy@1 { - max-speed = <1000>; - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -MoCA interface / MAC to MAC example: - -ethernet@f0b80000 { - phy-mode = "moca"; - fixed-link = <1 0 1000 0 0>; - mac-address = [ 00 10 18 36 24 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b80000 0xfc4c>; - interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - }; -}; - - -External MDIO-connected Gigabit PHY/switch: - -ethernet@f0ba0000 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - mac-address = [ 00 10 18 36 26 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0ba0000 0xfc4c>; - interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy0: ethernet-phy@0 { - max-speed = <1000>; - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml new file mode 100644 index 000000000000..e5af53508e25 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7xxx Ethernet Controller (GENET) binding + +maintainers: + - Doug Berger <opendmb@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + enum: + - brcm,genet-v1 + - brcm,genet-v2 + - brcm,genet-v3 + - brcm,genet-v4 + - brcm,genet-v5 + - brcm,bcm2711-genet-v5 + - brcm,bcm7712-genet-v5 + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: general purpose interrupt line + - description: RX and TX rings interrupt line + - description: Wake-on-LAN interrupt line + + + clocks: + minItems: 1 + items: + - description: main clock + - description: EEE clock + - description: Wake-on-LAN clock + + clock-names: + minItems: 1 + items: + - const: enet + - const: enet-eee + - const: enet-wol + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: "brcm,unimac-mdio.yaml" + + description: + GENET internal UniMAC MDIO bus + +required: + - reg + - interrupts + - phy-mode + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: ethernet-controller.yaml + +unevaluatedProperties: false + +examples: + #include <dt-bindings/interrupt-controller/arm-gic.h> + + - | + ethernet@f0b60000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v4"; + reg = <0xf0b60000 0xfc4c>; + interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio0: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <1000>; + reg = <1>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + - | + ethernet@f0b80000 { + phy-mode = "moca"; + fixed-link = <1 0 1000 0 0>; + mac-address = [ 00 10 18 36 24 1a ]; + compatible = "brcm,genet-v4"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf0b80000 0xfc4c>; + interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; + + mdio1: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + }; + }; + + - | + ethernet@f0ba0000 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mac-address = [ 00 10 18 36 26 1a ]; + compatible = "brcm,genet-v4"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf0ba0000 0xfc4c>; + interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; + + mdio2: mdio@e14 { + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; + + phy0: ethernet-phy@0 { + max-speed = <1000>; + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt deleted file mode 100644 index deb9e852ea27..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt +++ /dev/null @@ -1,62 +0,0 @@ -Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs. - -This MDIO bus multiplexer defines buses that could be internal as well as -external to SoCs and could accept MDIO transaction compatible to C-22 or -C-45 Clause. When child bus is selected, one needs to select these two -properties as well to generate desired MDIO transaction on appropriate bus. - -Required properties in addition to the generic multiplexer properties: - -MDIO multiplexer node: -- compatible: brcm,mdio-mux-iproc. - -Every non-ethernet PHY requires a compatible so that it could be probed based -on this compatible string. - -Optional properties: -- clocks: phandle of the core clock which drives the mdio block. - -Additional information regarding generic multiplexer properties can be found -at- Documentation/devicetree/bindings/net/mdio-mux.yaml - - -for example: - mdio_mux_iproc: mdio-mux@66020000 { - compatible = "brcm,mdio-mux-iproc"; - reg = <0x66020000 0x250>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - - mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml new file mode 100644 index 000000000000..af96b4fd89d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO bus multiplexer found in Broadcom iProc based SoCs. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + This MDIO bus multiplexer defines buses that could be internal as well as + external to SoCs and could accept MDIO transaction compatible to C-22 or + C-45 Clause. When child bus is selected, one needs to select these two + properties as well to generate desired MDIO transaction on appropriate bus. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: brcm,mdio-mux-iproc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: core clock driving the MDIO block + + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio_mux_iproc: mdio-mux@66020000 { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x66020000 0x250>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy0: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy1: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt deleted file mode 100644 index 75736739bfdd..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,systemport.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) - -Required properties: -- compatible: should be one of: - "brcm,systemport-v1.00" - "brcm,systemportlite-v1.00" or - "brcm,systemport" -- reg: address and length of the register set for the device. -- interrupts: interrupts for the device, first cell must be for the rx - interrupts, and the second cell should be for the transmit queues. An - optional third interrupt cell for Wake-on-LAN can be specified -- local-mac-address: Ethernet MAC address (48 bits) of this adapter -- phy-mode: Should be a string describing the PHY interface to the - Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt -- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for - the property specific details - -Optional properties: -- systemport,num-tier2-arb: number of tier 2 arbiters, an integer -- systemport,num-tier1-arb: number of tier 1 arbiters, an integer -- systemport,num-txq: number of HW transmit queues, an integer -- systemport,num-rxq: number of HW receive queues, an integer -- clocks: When provided, must be two phandles to the functional clocks nodes of - the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used - during normal operation, while the second phandle is the Wake-on-LAN clock. -- clock-names: When provided, names of the functional clock phandles, first - name should be "sw_sysport" and second should be "sw_sysportwol". - -Example: -ethernet@f04a0000 { - compatible = "brcm,systemport-v1.00"; - reg = <0xf04a0000 0x4650>; - local-mac-address = [ 00 11 22 33 44 55 ]; - fixed-link = <0 1 1000 0 0>; - phy-mode = "gmii"; - interrupts = <0x0 0x16 0x0>, - <0x0 0x17 0x0>; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml new file mode 100644 index 000000000000..5fc9c9fafd85 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,systemport.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + enum: + - brcm,systemport-v1.00 + - brcm,systemportlite-v1.00 + - brcm,systemport + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: interrupt line for RX queues + - description: interrupt line for TX queues + - description: interrupt line for Wake-on-LAN + + clocks: + items: + - description: main clock + - description: Wake-on-LAN clock + + clock-names: + items: + - const: sw_sysport + - const: sw_sysportwol + + systemport,num-tier2-arb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of tier 2 arbiters + + systemport,num-tier1-arb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of tier 2 arbiters + + systemport,num-txq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: + Number of HW transmit queues + + systemport,num-rxq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: + Number of HW receive queues + +required: + - reg + - interrupts + - phy-mode + +allOf: + - $ref: "ethernet-controller.yaml#" + +unevaluatedProperties: false + +examples: + - | + ethernet@f04a0000 { + compatible = "brcm,systemport-v1.00"; + reg = <0xf04a0000 0x4650>; + local-mac-address = [ 00 11 22 33 44 55 ]; + phy-mode = "gmii"; + interrupts = <0x0 0x16 0x0>, + <0x0 0x17 0x0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index f4f4c37f1d4e..0be426ee1e44 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -7,6 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom UniMAC MDIO bus controller maintainers: + - Doug Berger <opendmb@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> - Rafał Miłecki <rafal@milecki.pl> allOf: @@ -64,7 +66,6 @@ unevaluatedProperties: false required: - reg - - reg-names - '#address-cells' - '#size-cells' diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml new file mode 100644 index 000000000000..8dd06db34169 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cdns,macb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MACB/GEM Ethernet controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Claudiu Beznea <claudiu.beznea@microchip.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - cdns,at91rm9200-emac # Atmel at91rm9200 SoC + - const: cdns,emac # Generic + + - items: + - enum: + - cdns,zynq-gem # Xilinx Zynq-7xxx SoC + - cdns,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC + - const: cdns,gem # Generic + + - items: + - enum: + - cdns,at91sam9260-macb # Atmel at91sam9 SoCs + - cdns,sam9x60-macb # Microchip sam9x60 SoC + - const: cdns,macb # Generic + + - items: + - enum: + - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs + - enum: + - cdns,at91sam9260-macb # Atmel at91sam9 SoCs. + - const: cdns,macb # Generic + + - enum: + - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs + - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs + - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs + - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs + - cdns,at32ap7000-macb # Other 10/100 usage or use the generic form + - cdns,np4-macb # NP4 SoC devices + - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface + - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + - sifive,fu540-c000-gem # SiFive FU540-C000 SoC + - cdns,emac # Generic + - cdns,gem # Generic + - cdns,macb # Generic + + reg: + minItems: 1 + items: + - description: Basic register set + - description: GEMGXL Management block registers on SiFive FU540-C000 SoC + + interrupts: + minItems: 1 + maxItems: 8 + description: One interrupt per available hardware queue + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + items: + - enum: [ ether_clk, hclk, pclk ] + - enum: [ hclk, pclk ] + - const: tx_clk + - enum: [ rx_clk, tsu_clk ] + - const: tsu_clk + + local-mac-address: true + + phy-mode: true + + phy-handle: true + + fixed-link: true + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + mdio: + type: object + description: + Node containing PHY children. If this node is not present, then PHYs will + be direct children. + +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + + properties: + reset-gpios: true + + magic-packet: + description: + Indicates that the hardware supports waking up via magic packet. + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phy-mode + +allOf: + - $ref: ethernet-controller.yaml# + + - if: + not: + properties: + compatible: + contains: + const: sifive,fu540-c000-gem + then: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + macb0: ethernet@fffc4000 { + compatible = "cdns,at32ap7000-macb"; + reg = <0xfffc4000 0x4000>; + interrupts = <21>; + phy-mode = "rmii"; + local-mac-address = [3a 0e 03 04 05 06]; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + reset-gpios = <&pioE 6 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 24cd733c11d1..1ea0bd490473 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -52,10 +52,8 @@ properties: patternProperties: "^mdio@[0-1]$": - type: object - - allOf: - - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index 89c21b289447..f3c88371d76c 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -58,33 +58,14 @@ properties: B68 on the QCA832x and B49 on the QCA833x. mdio: - type: object + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false description: Qca8k switch have an internal mdio to access switch port. If this is not present, the legacy mapping is used and the internal mdio access is used. With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - - patternProperties: - "^(ethernet-)?phy@[0-4]$": - type: object - - allOf: - - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" - - properties: - reg: - maxItems: 1 - - required: - - reg - patternProperties: "^(ethernet-)?ports$": type: object diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index b0933a8c295a..47b5f728701d 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -69,6 +69,7 @@ properties: - rev-mii - rmii - rev-rmii + - moca # RX and TX delays are added by the MAC when required - rgmii @@ -178,7 +179,7 @@ properties: Duplex configuration. 0 for half duplex or 1 for full duplex - - enum: [10, 100, 1000] + - enum: [10, 100, 1000, 2500, 10000] description: Link speed in Mbits/sec. @@ -200,7 +201,7 @@ properties: description: Link speed. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [10, 100, 1000] + enum: [10, 100, 1000, 2500, 10000] full-duplex: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index eca41443fcce..fd8371e31867 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -165,7 +165,8 @@ properties: req_bit is the gpr bit offset for ENET stop request. mdio: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: Specifies the mdio bus in the FEC, used as a container for phy nodes. diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index 08a3f1f6aea2..52a7fa4f49a4 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -117,7 +117,7 @@ examples: snps,mtl-tx-config = <&mtl_tx_setup>; snps,tso; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 378ed2d3b003..67eaf02dda80 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -48,8 +48,8 @@ properties: and the instance to use in the second cell mdio: - type: object - $ref: "mdio.yaml#" + $ref: mdio.yaml# + unevaluatedProperties: false description: optional node for embedded MDIO controller required: diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml index 437502c5ca96..3ce9f9a16baf 100644 --- a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml +++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml @@ -46,7 +46,6 @@ properties: required: - compatible - reg - - interrupt-parent - interrupts - interrupt-names - lantiq,tx-burst-length diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml index 7bc074a42369..5bc1a21ca579 100644 --- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml +++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml @@ -38,7 +38,6 @@ properties: required: - compatible - reg - - interrupt-parent - interrupts - interrupt-names - "#address-cells" diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml index 76c164a8199a..ebf4e360f8dd 100644 --- a/Documentation/devicetree/bindings/net/litex,liteeth.yaml +++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml @@ -62,6 +62,7 @@ properties: mdio: $ref: mdio.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt deleted file mode 100644 index a1b06fd1962e..000000000000 --- a/Documentation/devicetree/bindings/net/macb.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Cadence MACB/GEM Ethernet controller - -Required properties: -- compatible: Should be "cdns,[<chip>-]{macb|gem}" - Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. - Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. - Use "cdns,np4-macb" for NP4 SoC devices. - Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. - Use "atmel,sama5d29-gem" for GEM XL IP (10/100) available on Atmel sama5d29 SoCs. - Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs. - Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. - Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. - Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. - Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. - Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC. - Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface. - Use "microchip,sama7g5-gem" for Microchip SAMA7G5 gigabit ethernet interface. - Or the generic form: "cdns,emac". -- reg: Address and length of the register set for the device - For "sifive,fu540-c000-gem", second range is required to specify the - address and length of the registers for GEMGXL Management block. -- interrupts: Should contain macb interrupt -- phy-mode: See ethernet.txt file in the same directory. -- clock-names: Tuple listing input clock names. - Required elements: 'pclk', 'hclk' - Optional elements: 'tx_clk' - Optional elements: 'rx_clk' applies to cdns,zynqmp-gem - Optional elements: 'tsu_clk' -- clocks: Phandles to input clocks. - -Optional properties: -- mdio: node containing PHY children. If this node is not present, then PHYs - will be direct children. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Optional properties for PHY child node: -- reset-gpios : Should specify the gpio for phy reset -- magic-packet : If present, indicates that the hardware supports waking - up via magic packet. -- phy-handle : see ethernet.txt file in the same directory - -Examples: - - macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb"; - reg = <0xfffc4000 0x4000>; - interrupts = <21>; - phy-mode = "rmii"; - local-mac-address = [3a 0e 03 04 05 06]; - clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; - ethernet-phy@1 { - reg = <0x1>; - reset-gpios = <&pioE 6 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml index d169adf5d9f4..4321c87de86f 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux.yaml +++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml @@ -15,9 +15,6 @@ description: |+ bus multiplexer/switch will have one child node for each child bus. properties: - $nodename: - pattern: '^mdio-mux[\-@]?' - mdio-parent-bus: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -32,12 +29,12 @@ properties: patternProperties: '^mdio@[0-9a-f]+$': - type: object + $ref: mdio.yaml# + unevaluatedProperties: false properties: reg: maxItems: 1 - description: The sub-bus number. additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 08e15fb1584f..b5706d4e7e38 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -59,7 +59,7 @@ properties: type: boolean patternProperties: - "^ethernet-phy@[0-9a-f]+$": + '@[0-9a-f]+$': type: object properties: @@ -76,12 +76,6 @@ patternProperties: the turn around line low at end of the control phase of the MDIO transaction. - resets: - maxItems: 1 - - reset-names: - const: phy - reset-gpios: maxItems: 1 description: diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index e6a5ff208253..def994c9cbb4 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -48,9 +48,8 @@ properties: to control the MII mode. mdio: - type: object - description: - Creates and registers an MDIO bus. + $ref: mdio.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml index cf4d35edaa1b..1ebf9e8c8a1d 100644 --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml @@ -34,14 +34,6 @@ properties: interrupts: maxItems: 1 - '#address-cells': - description: number of address cells for the MDIO bus - const: 1 - - '#size-cells': - description: number of size cells on the MDIO bus - const: 0 - clocks: items: - description: MAC main clock @@ -62,6 +54,10 @@ properties: - const: mac - const: mdio + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -85,7 +81,6 @@ examples: reset-names = "mac", "mdio"; clocks = <&pll 1>, <&pll 2>; clock-names = "eth", "mdio"; - qca,ethcfg = <ðcfg>; phy-mode = "mii"; phy-handle = <&phy_port4>; }; @@ -111,9 +106,6 @@ examples: #size-cells = <0>; switch10: switch@10 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "qca,ar9331-switch"; reg = <0x10>; resets = <&rst 8>; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 7ae70dc27f78..7eb43707e601 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -286,7 +286,8 @@ properties: MAC2MAC connection. mdio: - type: object + $ref: mdio.yaml# + unevaluatedProperties: false description: Creates and registers an MDIO bus. @@ -326,6 +327,9 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - snps,dwmac-3.50a + - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index 6bc61c42418f..aad5a9f3f962 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -72,6 +72,7 @@ properties: mdio: $ref: mdio.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 577f4e284425..3d8a3b763ae6 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -44,6 +44,12 @@ properties: - st,stm32-dwmac - const: snps,dwmac-3.50a + reg: true + + reg-names: + items: + - const: stmmaceth + clocks: minItems: 3 items: @@ -102,7 +108,7 @@ examples: compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; reg = <0x5800a000 0x2000>; reg-names = "stmmaceth"; - interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clock-names = "stmmaceth", "mac-clk-tx", @@ -121,6 +127,7 @@ examples: phy-mode = "rgmii"; }; + - | //Example 2 (MCU example) ethernet1: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; @@ -136,6 +143,7 @@ examples: phy-mode = "mii"; }; + - | //Example 3 ethernet2: ethernet@40027000 { compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 5728fe23f530..dbfca5ee9139 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -37,6 +37,13 @@ properties: maximum: 2500000 description: MDIO Bus frequency + clocks: + maxItems: 1 + + clock-names: + items: + - const: fck + ti,hwmods: description: TI hwmod name deprecated: true diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index 70a1209cb13b..1b780dce61ab 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -92,7 +92,7 @@ examples: tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>; rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; - ti,max-output-impedance = "true"; + ti,max-output-impedance; ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>; rx-internal-delay-ps = <2000>; tx-internal-delay-ps = <2000>; diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 59724d18e6f3..b12bfe61c67a 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -71,7 +71,7 @@ examples: phy-mode = "rgmii-id"; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <0x1>; #size-cells = <0x0>; compatible = "snps,dwmac-mdio"; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 1489d3c1cd6e..269cd63fb544 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -191,9 +191,9 @@ examples: channels = <36 48>; rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>; rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>, - <3 22 22 22 22 22 22 22 22 22 22>; + /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>; rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>, - <4 20 20 20 20 20 20 20 20 20 20 20 20>; + /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>; }; b1 { channels = <100 181>; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt deleted file mode 100644 index df065aa53a83..000000000000 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ /dev/null @@ -1,133 +0,0 @@ -* Broadcom iProc PCIe controller with the platform bus interface - -Required properties: -- compatible: - "brcm,iproc-pcie" for the first generation of PAXB based controller, -used in SoCs including NSP, Cygnus, NS2, and Pegasus - "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based -controllers, used in Stingray - "brcm,iproc-pcie-paxc" for the first generation of PAXC based -controller, used in NS2 - "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based -controller, used in Stingray - PAXB-based root complex is used for external endpoint devices. PAXC-based -root complex is connected to emulated endpoint devices internal to the ASIC -- reg: base address and length of the PCIe controller I/O register space -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map, standard PCI properties to define the - mapping of the PCIe interface to interrupt numbers -- linux,pci-domain: PCI domain ID. Should be unique for each host controller -- bus-range: PCI bus numbers covered -- #address-cells: set to <3> -- #size-cells: set to <2> -- device_type: set to "pci" -- ranges: ranges for the PCI memory and I/O regions - -Optional properties: -- phys: phandle of the PCIe PHY device -- phy-names: must be "pcie-phy" -- dma-coherent: present if DMA operations are coherent -- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done - by the ASIC after power on reset. In this case, SW is required to configure -the mapping, based on inbound memory regions specified by this property. - -- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done -by the ASIC after power on reset. In this case, SW needs to configure it - -If the brcm,pcie-ob property is present, the following properties become -effective: - -Required: -- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal -address used by the iProc PCIe core (not the PCIe address) - -MSI support (optional): - -For older platforms without MSI integrated in the GIC, iProc PCIe core provides -an event queue based MSI support. The iProc MSI uses host memories to store -MSI posted writes in the event queues - -On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used - -- msi-map: Maps a Requester ID to an MSI controller and associated MSI -sideband data - -- msi-parent: Link to the device node of the MSI controller, used when no MSI -sideband data is passed between the iProc PCIe controller and the MSI -controller - -Refer to the following binding documents for more detailed description on -the use of 'msi-map' and 'msi-parent': - Documentation/devicetree/bindings/pci/pci-msi.txt - Documentation/devicetree/bindings/interrupt-controller/msi.txt - -When the iProc event queue based MSI is used, one needs to define the -following properties in the MSI device node: -- compatible: Must be "brcm,iproc-msi" -- msi-controller: claims itself as an MSI controller -- interrupts: List of interrupt IDs from its parent interrupt device - -Optional properties: -- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that -require the interrupt enable registers to be set explicitly to enable MSI - -Example: - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - - phys = <&phy 0 5>; - phy-names = "pcie-phy"; - - brcm,pcie-ob; - brcm,pcie-ob-axi-offset = <0x00000000>; - - msi-parent = <&msi0>; - - /* iProc event queue based MSI */ - msi0: msi@18012000 { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, - <GIC_SPI 97 IRQ_TYPE_NONE>, - <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>, - }; - }; - - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - - phys = <&phy 1 6>; - phy-names = "pcie-phy"; - }; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml new file mode 100644 index 000000000000..0972868735fc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PCIe controller with the platform bus interface + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + items: + - enum: + # for the first generation of PAXB based controller, used in SoCs + # including NSP, Cygnus, NS2, and Pegasus + - brcm,iproc-pcie + # for the second generation of PAXB-based controllers, used in + # Stingray + - brcm,iproc-pcie-paxb-v2 + # For the first generation of PAXC based controller, used in NS2 + - brcm,iproc-pcie-paxc + # For the second generation of PAXC based controller, used in Stingray + - brcm,iproc-pcie-paxc-v2 + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe controller I/O register space + + interrupt-map: true + + interrupt-map-mask: true + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 1 + maxItems: 2 + description: > + Ranges for the PCI memory and I/O regions + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + bus-range: true + + dma-coherent: true + + "#address-cells": true + + "#size-cells": true + + device_type: true + + brcm,pcie-ob: + type: boolean + description: > + Some iProc SoCs do not have the outbound address mapping done by the + ASIC after power on reset. In this case, SW needs to configure it + + brcm,pcie-ob-axi-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The offset from the AXI address to the internal address used by the + iProc PCIe core (not the PCIe address) + + msi: + type: object + properties: + compatible: + items: + - const: brcm,iproc-msi + + msi-parent: true + + msi-controller: true + + brcm,pcie-msi-inten: + type: boolean + description: > + Needs to be present for some older iProc platforms that require the + interrupt enable registers to be set explicitly to enable MSI + +dependencies: + brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"] + brcm,pcie-msi-inten: [msi-controller] + +required: + - compatible + - reg + - ranges + +if: + properties: + compatible: + contains: + enum: + - brcm,iproc-pcie +then: + required: + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <1>; + #size-cells = <1>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-axi-offset = <0x00000000>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 1fe102743f82..7c24d711b377 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -76,6 +76,7 @@ properties: maxItems: 3 required: + - compatible - reg - ranges - dma-ranges diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml index 651eee88989d..e6ef1012a580 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -11,7 +11,6 @@ maintainers: allOf: - $ref: "cdns-pcie-ep.yaml#" - - $ref: "pci-ep.yaml#" properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 21e8a8849076..baeafda36ebe 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: "cdns-pcie.yaml#" + - $ref: "pci-ep.yaml#" properties: cdns,max-outbound-regions: diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml index cbee87802559..c9f04999c9cf 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -37,6 +37,19 @@ properties: minItems: 3 maxItems: 4 + clocks: true + + clock-names: + items: + - const: pcie_phy_ref + - const: pcie_aux + - const: pcie_apb_phy + - const: pcie_apb_sys + - const: pcie_aclk + + phys: + maxItems: 1 + hisilicon,clken-gpios: description: | Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml index 044fa967bc8b..d60f43fd9c5a 100644 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml @@ -45,6 +45,9 @@ patternProperties: phys: maxItems: 1 + phy-names: + pattern: '^pcie-phy[0-2]$' + required: - "#interrupt-cells" - interrupt-map-mask diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index 742206dbd965..0499b94627ae 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -95,6 +95,10 @@ properties: phys: maxItems: 1 + phy-names: + items: + - const: pcie-phy + '#interrupt-cells': const: 1 diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 7b0776457178..edb4f81253c8 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -46,6 +46,24 @@ properties: msi-parent: description: MSI controller the device is capable of using. + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml index 2b9d1d6fc661..392f0ab488c2 100644 --- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -32,6 +32,8 @@ properties: - const: config - const: mgmt + dma-coherent: true + num-lanes: const: 8 @@ -61,10 +63,8 @@ required: - num-lanes - interrupts - interrupt-names - - interrupt-parent - interrupt-map-mask - interrupt-map - - clock-names - clocks - resets - pwren-gpios @@ -104,7 +104,6 @@ examples: <0x0 0x0 0x0 0x2 &plic0 58>, <0x0 0x0 0x0 0x3 &plic0 59>, <0x0 0x0 0x0 0x4 &plic0 60>; - clock-names = "pcie_aux"; clocks = <&prci PRCI_CLK_PCIE_AUX>; resets = <&prci 4>; pwren-gpios = <&gpio 5 0>; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index b5935b1b153f..e59059ab5be0 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -64,16 +64,12 @@ properties: maxItems: 1 deprecated: true - max-functions: - $ref: /schemas/types.yaml#/definitions/uint32 - description: maximum number of functions that can be configured - required: - reg - reg-names - compatible -unevaluatedProperties: false +additionalProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 9ed0dfba7f89..a5345c494744 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -73,7 +73,7 @@ properties: does not specify it, the driver autodetects it. deprecated: true -unevaluatedProperties: false +additionalProperties: true required: - reg diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index 144cbcd60a1c..179ab0858482 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -79,7 +79,7 @@ required: - resets - reset-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml index 78c217d362a7..a6896cb40e83 100644 --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml @@ -66,8 +66,6 @@ examples: reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie0_mode>; - num-ib-windows = <16>; - num-ob-windows = <16>; max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml index 834dc1c1743c..eabe1635e336 100644 --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml @@ -29,6 +29,9 @@ properties: - const: config - const: atu + interrupts: + maxItems: 1 + power-domains: maxItems: 1 @@ -87,7 +90,6 @@ examples: ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie0_mode>; bus-range = <0x0 0xff>; - num-viewport = <16>; max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index cc900202df29..2115d5a3f0e1 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -60,6 +60,8 @@ properties: - const: fck - const: pcie_refclk + dma-coherent: true + vendor-id: const: 0x104c diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index a2bbc0eb7220..32f4641085bc 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -55,7 +55,6 @@ required: - reg-names - "#interrupt-cells" - interrupts - - interrupt-parent - interrupt-map - interrupt-map-mask - bus-range diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml new file mode 100644 index 000000000000..aef63a542f34 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2021 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU) + +maintainers: + - Suzuki K Poulose <suzuki.poulose@arm.com> + - Robin Murphy <robin.murphy@arm.com> + +description: + ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared + L3 memory system, control logic and external interfaces to form a multicore + cluster. The PMU enables gathering various statistics on the operation of the + DSU. The PMU provides independent 32-bit counters that can count any of the + supported events, along with a 64-bit cycle counter. The PMU is accessed via + CPU system registers and has no MMIO component. + +properties: + compatible: + oneOf: + - const: arm,dsu-pmu + - items: + - const: arm,dsu-110-pmu + - const: arm,dsu-pmu + + interrupts: + items: + - description: nCLUSTERPMUIRQ interrupt + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 12 + description: List of phandles for the CPUs connected to this DSU instance. + +required: + - compatible + - interrupts + - cpus + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt deleted file mode 100644 index 10efff28b52b..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ /dev/null @@ -1,47 +0,0 @@ -Broadcom Cygnus PCIe PHY - -Required properties: -- compatible: must be "brcm,cygnus-pcie-phy" -- reg: base address and length of the PCIe PHY block -- #address-cells: must be 1 -- #size-cells: must be 0 - -Each PCIe PHY should be represented by a child node - -Required properties For the child node: -- reg: the PHY ID -0 - PCIe RC 0 -1 - PCIe RC 1 -- #phy-cells: must be 0 - -Example: - pcie_phy: phy@301d0a0 { - compatible = "brcm,cygnus-pcie-phy"; - reg = <0x0301d0a0 0x14>; - - pcie0_phy: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - - pcie1_phy: phy@1 { - reg = <1>; - #phy-cells = <0>; - }; - }; - - /* users of the PCIe phy */ - - pcie0: pcie@18012000 { - ... - ... - phys = <&pcie0_phy>; - phy-names = "pcie-phy"; - }; - - pcie1: pcie@18013000 { - ... - ... - phys = <pcie1_phy>; - phy-names = "pcie-phy"; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml new file mode 100644 index 000000000000..045699c65779 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus PCIe PHY + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +properties: + $nodename: + pattern: "^pcie[-|_]phy(@.*)?$" + + compatible: + items: + - const: brcm,cygnus-pcie-phy + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe PHY block + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^pcie-phy@[0-9]+$": + type: object + description: > + PCIe PHY child nodes + + properties: + reg: + maxItems: 1 + description: > + The PCIe PHY port number + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + pcie_phy: pcie_phy@301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + pcie0_phy: pcie-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: pcie-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt deleted file mode 100644 index 5b51007c6f24..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Broadcom NS2 PCIe PHY binding document - -Required bus properties: -- reg: MDIO Bus number for the MDIO interface -- #address-cells: must be 1 -- #size-cells: must be 0 - -Required PHY properties: -- compatible: should be "brcm,ns2-pcie-phy" -- reg: MDIO Phy ID for the MDIO interface -- #phy-cells: must be 0 - -This is a child bus node of "brcm,mdio-mux-iproc" node. - -Example: - -mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml new file mode 100644 index 000000000000..70eb48b391c9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom NS2 PCIe PHY binding document + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +properties: + compatible: + const: brcm,ns2-pcie-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt deleted file mode 100644 index af3701bc15c4..000000000000 --- a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt +++ /dev/null @@ -1,54 +0,0 @@ -Drive a GPIO line that can be used to restart the system from a restart -handler. - -This binding supports level and edge triggered reset. At driver load -time, the driver will request the given gpio line and install a restart -handler. If the optional properties 'open-source' is not found, the GPIO line -will be driven in the inactive state. Otherwise its not driven until -the restart is initiated. - -When the system is restarted, the restart handler will be invoked in -priority order. The gpio is configured as an output, and driven active, -triggering a level triggered reset condition. This will also cause an -inactive->active edge condition, triggering positive edge triggered -reset. After a delay specified by active-delay, the GPIO is set to -inactive, thus causing an active->inactive edge, triggering negative edge -triggered reset. After a delay specified by inactive-delay, the GPIO -is driven active again. After a delay specified by wait-delay, the -restart handler completes allowing other restart handlers to be attempted. - -Required properties: -- compatible : should be "gpio-restart". -- gpios : The GPIO to set high/low, see "gpios property" in - Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be - low to reset the board set it to "Active Low", otherwise set - gpio to "Active High". - -Optional properties: -- open-source : Treat the GPIO as being open source and defer driving - it to when the restart is initiated. If this optional property is not - specified, the GPIO is initialized as an output in its inactive state. -- priority : A priority ranging from 0 to 255 (default 128) according to - the following guidelines: - 0: Restart handler of last resort, with limited restart - capabilities - 128: Default restart handler; use if no other restart handler is - expected to be available, and/or if restart functionality is - sufficient to restart the entire system - 255: Highest priority restart handler, will preempt all other - restart handlers -- active-delay: Delay (default 100) to wait after driving gpio active [ms] -- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms] -- wait-delay: Delay (default 3000) to wait after completing restart - sequence [ms] - -Examples: - -gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio 4 0>; - priority = <128>; - active-delay = <100>; - inactive-delay = <100>; - wait-delay = <3000>; -}; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml new file mode 100644 index 000000000000..3dd22220cb5f --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled reset + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: > + Drive a GPIO line that can be used to restart the system from a restart handler. + + This binding supports level and edge triggered reset. At driver load time, the driver will + request the given gpio line and install a restart handler. If the optional properties + 'open-source' is not found, the GPIO line will be driven in the inactive state. Otherwise its + not driven until the restart is initiated. + + When the system is restarted, the restart handler will be invoked in priority order. The GPIO + is configured as an output, and driven active, triggering a level triggered reset condition. + This will also cause an inactive->active edge condition, triggering positive edge triggered + reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an + active->inactive edge, triggering negative edge triggered reset. After a delay specified by + inactive-delay, the GPIO is driven active again. After a delay specified by wait-delay, the + restart handler completes allowing other restart handlers to be attempted. + +properties: + compatible: + const: gpio-restart + + gpios: + description: The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board + set it to "Active Low", otherwise set GPIO to "Active High". + + open-source: + $ref: /schemas/types.yaml#/definitions/flag + description: Treat the GPIO as being open source and defer driving it to when the restart is + initiated. If this optional property is not specified, the GPIO is initialized as an output + in its inactive state. + + priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + A priority ranging from 0 to 255 (default 128) according to the following guidelines: + + 0: Restart handler of last resort, with limited restart capabilities. + 128: Default restart handler; use if no other restart handler is expected to be available, + and/or if restart functionality is sufficient to restart the entire system. + 255: Highest priority restart handler, will preempt all other restart handlers. + minimum: 0 + maximum: 255 + default: 128 + + active-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 100) to wait after driving gpio active [ms] + default: 100 + + inactive-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 100) to wait after driving gpio inactive [ms] + default: 100 + + wait-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 3000) to wait after completing restart sequence [ms] + default: 100 + +additionalProperties: false + +required: + - compatible + - gpios + +examples: + - | + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 4 0>; + priority = <128>; + active-delay = <100>; + inactive-delay = <100>; + wait-delay = <3000>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index ffb344987a7b..6b4588a3253b 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -44,7 +44,9 @@ properties: SoC == State of Charge == Capacity. maxim,rcomp: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 2 description: | A value to compensate readings for various battery chemistries and operating temperatures. max17040,41 have 2 byte rcomp, default to 0x97 0x00. diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt deleted file mode 100644 index 0e662d7f6bd1..000000000000 --- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt +++ /dev/null @@ -1,20 +0,0 @@ -Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller) - -Required properties: - -- compatible: must be "brcm,bcm7038-pwm" -- reg: physical base address and length for this controller -- #pwm-cells: should be 2. See pwm.yaml in this directory for a description - of the cells format -- clocks: a phandle to the reference clock for this block which is fed through - its internal variable clock frequency generator - - -Example: - - pwm: pwm@f0408000 { - compatible = "brcm,bcm7038-pwm"; - reg = <0xf0408000 0x28>; - #pwm-cells = <2>; - clocks = <&upg_fixed>; - }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml new file mode 100644 index 000000000000..4080e098f746 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller) + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: brcm,bcm7038-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + +additionalProperties: false + +examples: + - | + pwm: pwm@f0408000 { + compatible = "brcm,bcm7038-pwm"; + reg = <0xf0408000 0x28>; + #pwm-cells = <2>; + clocks = <&upg_fixed>; + }; diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml new file mode 100644 index 000000000000..035a50fe3ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra210-emc-table.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 EMC Frequency Table Device Tree Bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: On Tegra210, firmware passes a binary representation of the + EMC frequency table via a reserved memory region. + +allOf: + - $ref: "reserved-memory.yaml" + +properties: + compatible: + const: nvidia,tegra210-emc-table + + reg: + description: region of memory reserved by firmware to pass the EMC + frequency table + +unevaluatedProperties: false + +required: + - compatible + - reg diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt deleted file mode 100644 index 68395530c0a5..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt +++ /dev/null @@ -1,37 +0,0 @@ -Command DB ---------- - -Command DB is a database that provides a mapping between resource key and the -resource address for a system resource managed by a remote processor. The data -is stored in a shared memory region and is loaded by the remote processor. - -Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for -controlling shared resources. Depending on the board configuration the shared -resource properties may change. These properties are dynamically probed by the -remote processor and made available in the shared memory. - -The bindings for Command DB is specified in the reserved-memory section in -devicetree. The devicetree representation of the command DB driver should be: - -Properties: -- compatible: - Usage: required - Value type: <string> - Definition: Should be "qcom,cmd-db" - -- reg: - Usage: required - Value type: <prop encoded array> - Definition: The register address that points to the actual location of - the Command DB in memory. - -Example: - - reserved-memory { - [...] - reserved-memory@85fe0000 { - reg = <0x0 0x85fe0000 0x0 0x20000>; - compatible = "qcom,cmd-db"; - no-map; - }; - }; diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml new file mode 100644 index 000000000000..df1b5e0ed3f4 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reserved-memory/qcom,cmd-db.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Command DB + +description: | + Command DB is a database that provides a mapping between resource key and the + resource address for a system resource managed by a remote processor. The data + is stored in a shared memory region and is loaded by the remote processor. + + Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for + controlling shared resources. Depending on the board configuration the shared + resource properties may change. These properties are dynamically probed by the + remote processor and made available in the shared memory. + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +allOf: + - $ref: "reserved-memory.yaml" + +properties: + compatible: + const: qcom,cmd-db + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + reserved-memory@85fe0000 { + reg = <0x85fe0000 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + }; diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt deleted file mode 100644 index 8562ba1dce69..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt +++ /dev/null @@ -1,51 +0,0 @@ -Qualcomm Remote File System Memory binding - -This binding describes the Qualcomm remote filesystem memory, which serves the -purpose of describing the shared memory region used for remote processors to -access block device data using the Remote Filesystem protocol. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be: - "qcom,rmtfs-mem" - -- reg: - Usage: required for static allocation - Value type: <prop-encoded-array> - Definition: must specify base address and size of the memory region, - as described in reserved-memory.txt - -- size: - Usage: required for dynamic allocation - Value type: <prop-encoded-array> - Definition: must specify a size of the memory region, as described in - reserved-memory.txt - -- qcom,client-id: - Usage: required - Value type: <u32> - Definition: identifier of the client to use this region for buffers. - -- qcom,vmid: - Usage: optional - Value type: <u32> - Definition: vmid of the remote processor, to set up memory protection. - -= EXAMPLE -The following example shows the remote filesystem memory setup for APQ8016, -with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x86700000 0x0 0xe0000>; - no-map; - - qcom,client-id = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml new file mode 100644 index 000000000000..2998f1c8f0db --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Remote File System Memory + +description: | + This binding describes the Qualcomm remote filesystem memory, which serves the + purpose of describing the shared memory region used for remote processors to + access block device data using the Remote Filesystem protocol. + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +allOf: + - $ref: "reserved-memory.yaml" + +properties: + compatible: + const: qcom,rmtfs-mem + + qcom,client-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + identifier of the client to use this region for buffers + + qcom,vmid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + vmid of the remote processor, to set up memory protection + +required: + - qcom,client-id + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x86700000 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt deleted file mode 100644 index ee59409640f2..000000000000 --- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt +++ /dev/null @@ -1,27 +0,0 @@ -Broadcom STB SW_INIT-style reset controller -=========================================== - -Broadcom STB SoCs have a SW_INIT-style reset controller with separate -SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit -reset lines. - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be brcm,brcmstb-reset -- reg: register base and length -- #reset-cells: must be set to 1 - -Example: - - reset: reset-controller@8404318 { - compatible = "brcm,brcmstb-reset"; - reg = <0x8404318 0x30>; - #reset-cells = <1>; - }; - - ðernet_switch { - resets = <&reset 26>; - reset-names = "switch"; - }; diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml new file mode 100644 index 000000000000..e00efa88a198 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Broadcom STB SW_INIT-style reset controller + +description: + Broadcom STB SoCs have a SW_INIT-style reset controller with separate + SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit + reset lines. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,brcmstb-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset: reset-controller@8404318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x8404318 0x30>; + #reset-cells = <1>; + }; + + ethernet_switch { + resets = <&reset 26>; + reset-names = "switch"; + }; diff --git a/Documentation/devicetree/bindings/rng/apm,rng.txt b/Documentation/devicetree/bindings/rng/apm,rng.txt deleted file mode 100644 index 4dde4b06cdd9..000000000000 --- a/Documentation/devicetree/bindings/rng/apm,rng.txt +++ /dev/null @@ -1,17 +0,0 @@ -APM X-Gene SoC random number generator. - -Required properties: - -- compatible : should be "apm,xgene-rng" -- reg : specifies base physical address and size of the registers map -- clocks : phandle to clock-controller plus clock-specifier pair -- interrupts : specify the fault interrupt for the RNG device - -Example: - - rng: rng@10520000 { - compatible = "apm,xgene-rng"; - reg = <0x0 0x10520000 0x0 0x100>; - interrupts = <0x0 0x41 0x4>; - clocks = <&rngpkaclk 0>; - }; diff --git a/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml new file mode 100644 index 000000000000..02be143cc829 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/apm,x-gene-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SoC Random Number Generator + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +properties: + compatible: + const: apm,xgene-rng + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rngpkaclk 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml new file mode 100644 index 000000000000..c1527637eb74 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/atmel,at91-trng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91 True Random Number Generator + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Ludovic Desroches <ludovic.desroches@microchip.com> + +properties: + compatible: + oneOf: + - enum: + - atmel,at91sam9g45-trng + - microchip,sam9x60-trng + - items: + - enum: + - microchip,sama7g5-trng + - const: atmel,at91sam9g45-trng + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rng@fffcc000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfffcc000 0x4000>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; diff --git a/Documentation/devicetree/bindings/rng/atmel-trng.txt b/Documentation/devicetree/bindings/rng/atmel-trng.txt deleted file mode 100644 index 3900ee4f3532..000000000000 --- a/Documentation/devicetree/bindings/rng/atmel-trng.txt +++ /dev/null @@ -1,16 +0,0 @@ -Atmel TRNG (True Random Number Generator) block - -Required properties: -- compatible : Should be "atmel,at91sam9g45-trng" or "microchip,sam9x60-trng" -- reg : Offset and length of the register set of this block -- interrupts : the interrupt number for the TRNG block -- clocks: should contain the TRNG clk source - -Example: - -trng@fffcc000 { - compatible = "atmel,at91sam9g45-trng"; - reg = <0xfffcc000 0x4000>; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; -}; diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt deleted file mode 100644 index 802523196ee5..000000000000 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ /dev/null @@ -1,16 +0,0 @@ -HWRNG support for the iproc-rng200 driver - -Required properties: -- compatible : Must be one of: - "brcm,bcm2711-rng200" - "brcm,bcm7211-rng200" - "brcm,bcm7278-rng200" - "brcm,iproc-rng200" -- reg : base address and size of control register block - -Example: - -rng { - compatible = "brcm,iproc-rng200"; - reg = <0x18032000 0x28>; -}; diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml new file mode 100644 index 000000000000..a00e9bc8b609 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/rng/brcm,iproc-rng200.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: HWRNG support for the iproc-rng200 driver + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + enum: + - brcm,bcm2711-rng200 + - brcm,bcm7211-rng200 + - brcm,bcm7278-rng200 + - brcm,iproc-rng200 + + reg: + maxItems: 1 + +additionalProperties: false + +examples: + - | + rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; diff --git a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt b/Documentation/devicetree/bindings/rng/ks-sa-rng.txt deleted file mode 100644 index b7a65b487901..000000000000 --- a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt +++ /dev/null @@ -1,21 +0,0 @@ -Keystone SoC Hardware Random Number Generator(HWRNG) Module - -On Keystone SoCs HWRNG module is a submodule of the Security Accelerator. - -- compatible: should be "ti,keystone-rng" -- ti,syscon-sa-cfg: phandle to syscon node of the SA configuration registers. - This registers are shared between hwrng and crypto drivers. -- clocks: phandle to the reference clocks for the subsystem -- clock-names: functional clock name. Should be set to "fck" -- reg: HWRNG module register space - -Example: -/* K2HK */ - -rng@24000 { - compatible = "ti,keystone-rng"; - ti,syscon-sa-cfg = <&sa_config>; - clocks = <&clksa>; - clock-names = "fck"; - reg = <0x24000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt deleted file mode 100644 index 65c04172fc8c..000000000000 --- a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt +++ /dev/null @@ -1,12 +0,0 @@ -NPCM SoC Random Number Generator - -Required properties: -- compatible : "nuvoton,npcm750-rng" for the NPCM7XX BMC. -- reg : Specifies physical base address and size of the registers. - -Example: - -rng: rng@f000b000 { - compatible = "nuvoton,npcm750-rng"; - reg = <0xf000b000 0x8>; -}; diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml new file mode 100644 index 000000000000..abd134c9d400 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/nuvoton,npcm-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM SoC Random Number Generator + +maintainers: + - Avi Fishman <avifishman70@gmail.com> + - Tomer Maimon <tmaimon77@gmail.com> + - Tali Perry <tali.perry1@gmail.com> + - Patrick Venture <venture@google.com> + - Nancy Yuen <yuenn@google.com> + - Benjamin Fair <benjaminfair@google.com> + +properties: + compatible: + const: nuvoton,npcm750-rng + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rng@f000b000 { + compatible = "nuvoton,npcm750-rng"; + reg = <0xf000b000 0x8>; + }; diff --git a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt b/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt deleted file mode 100644 index f315c9723bd2..000000000000 --- a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt +++ /dev/null @@ -1,27 +0,0 @@ -OMAP ROM RNG driver binding - -Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The -implementation can depend on the SoC secure ROM used. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "nokia,n900-rom-rng" - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the the RNG interface clock - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: must be "ick" - -Example: - - rom_rng: rng { - compatible = "nokia,n900-rom-rng"; - clocks = <&rng_ick>; - clock-names = "ick"; - }; diff --git a/Documentation/devicetree/bindings/rng/st,rng.txt b/Documentation/devicetree/bindings/rng/st,rng.txt deleted file mode 100644 index 35734bc282e9..000000000000 --- a/Documentation/devicetree/bindings/rng/st,rng.txt +++ /dev/null @@ -1,15 +0,0 @@ -STMicroelectronics HW Random Number Generator ----------------------------------------------- - -Required parameters: -compatible : Should be "st,rng" -reg : Base address and size of IP's register map. -clocks : Phandle to device's clock (See: ../clocks/clock-bindings.txt) - -Example: - -rng@fee80000 { - compatible = "st,rng"; - reg = <0xfee80000 0x1000>; - clocks = <&clk_sysin>; -} diff --git a/Documentation/devicetree/bindings/rng/st,rng.yaml b/Documentation/devicetree/bindings/rng/st,rng.yaml new file mode 100644 index 000000000000..ff1211ef9046 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/st,rng.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/st,rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics Hardware Random Number Generator + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +properties: + compatible: + const: st,rng + + clocks: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - reg + +additionalProperties: false + +examples: + - | + rng@fee80000 { + compatible = "st,rng"; + reg = <0xfee80000 0x1000>; + clocks = <&clk_sysin>; + }; diff --git a/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml new file mode 100644 index 000000000000..e749818fc193 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/ti,keystone-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Keystone SoC Hardware Random Number Generator + +maintainers: + - Nishanth Menon <nm@ti.com> + - Santosh Shilimkar <ssantosh@kernel.org> + +properties: + compatible: + const: ti,keystone-rng + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fck + + reg: + maxItems: 1 + + ti,syscon-sa-cfg: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: | + Phandle to syscon node of the SA configuration registers. These + registers are shared between HWRNG and crypto drivers. + +required: + - compatible + - clocks + - clock-names + - reg + - ti,syscon-sa-cfg + +additionalProperties: false + +examples: + - | + rng@24000 { + compatible = "ti,keystone-rng"; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + reg = <0x24000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml new file mode 100644 index 000000000000..9a58440b1ab1 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/ti,omap-rom-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP ROM Random Number Generator + +maintainers: + - Pali Rohár <pali@kernel.org> + - Tony Lindgren <tony@atomide.com> + +description: + Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. + The implementation can depend on the SoC secure ROM used. + +properties: + compatible: + const: nokia,n900-rom-rng + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ick + +required: + - compatible + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + }; diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt deleted file mode 100644 index fb4846160047..000000000000 --- a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt +++ /dev/null @@ -1,25 +0,0 @@ -HWRNG support for the timeriomem_rng driver - -Required properties: -- compatible : "timeriomem_rng" -- reg : base address to sample from -- period : wait time in microseconds to use between samples - -Optional properties: -- quality : estimated number of bits of true entropy per 1024 bits read from the - rng. Defaults to zero which causes the kernel's default quality to - be used instead. Note that the default quality is usually zero - which disables using this rng to automatically fill the kernel's - entropy pool. - -N.B. currently 'reg' must be at least four bytes wide and 32-bit aligned - -Example: - -hwrng@44 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "timeriomem_rng"; - reg = <0x44 0x04>; - period = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml new file mode 100644 index 000000000000..84bf518a5549 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/timeriomem_rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TimerIO Random Number Generator + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + const: timeriomem_rng + + period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: wait time in microseconds to use between samples + + quality: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Estimated number of bits of true entropy per 1024 bits read from the rng. + Defaults to zero which causes the kernel's default quality to be used + instead. Note that the default quality is usually zero which disables + using this rng to automatically fill the kernel's entropy pool. + + reg: + maxItems: 1 + description: + Base address to sample from. Currently 'reg' must be at least four bytes + wide and 32-bit aligned. + +required: + - compatible + - period + - reg + +additionalProperties: false + +examples: + - | + rng@44 { + compatible = "timeriomem_rng"; + reg = <0x44 0x04>; + period = <1000000>; + }; diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt deleted file mode 100644 index d946f28502b3..000000000000 --- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt +++ /dev/null @@ -1,20 +0,0 @@ -Broadcom STB wake-up Timer - -The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the -ability to wake up the system from low-power suspend/standby modes. - -Required properties: -- compatible : should contain "brcm,brcmstb-waketimer" -- reg : the register start and length for the WKTMR block -- interrupts : The TIMER interrupt -- clocks : The phandle to the UPG fixed clock (27Mhz domain) - -Example: - -waketimer@f0411580 { - compatible = "brcm,brcmstb-waketimer"; - reg = <0xf0411580 0x14>; - interrupts = <0x3>; - interrupt-parent = <&aon_pm_l2_intc>; - clocks = <&upg_fixed>; -}; diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml new file mode 100644 index 000000000000..9fe079917a98 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/brcm,brcmstb-waketimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB wake-up Timer + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the + ability to wake up the system from low-power suspend/standby modes. + +allOf: + - $ref: "rtc.yaml#" + +properties: + compatible: + const: brcm,brcmstb-waketimer + + reg: + maxItems: 1 + + interrupts: + description: the TIMER interrupt + maxItems: 1 + + clocks: + description: clock reference in the 27MHz domain + maxItems: 1 + +additionalProperties: false + +examples: + - | + rtc@f0411580 { + compatible = "brcm,brcmstb-waketimer"; + reg = <0xf0411580 0x14>; + interrupts = <0x3>; + interrupt-parent = <&aon_pm_l2_intc>; + clocks = <&upg_fixed>; + }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 5ea00f8a283d..d8aed84abcd3 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -91,6 +91,9 @@ properties: 3000ms. default: 3000 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt deleted file mode 100644 index 74a9ef09db8b..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom STB thermal management - -Thermal management core, provided by the AVS TMON hardware block. - -Required properties: -- compatible: must be one of: - "brcm,avs-tmon-bcm7216" - "brcm,avs-tmon-bcm7445" - "brcm,avs-tmon" -- reg: address range for the AVS TMON registers -- interrupts: temperature monitor interrupt, for high/low threshold triggers, - required except for "brcm,avs-tmon-bcm7216" -- interrupt-names: should be "tmon" - -Example: - - thermal@f04d1500 { - compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; - reg = <0xf04d1500 0x28>; - interrupts = <0x6>; - interrupt-names = "tmon"; - interrupt-parent = <&avs_host_l2_intc>; - }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml new file mode 100644 index 000000000000..267a0f423504 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,avs-tmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB thermal management + +description: Thermal management core, provided by the AVS TMON hardware block. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + items: + - enum: + - brcm,avs-tmon-bcm7216 + - brcm,avs-tmon-bcm7445 + - const: brcm,avs-tmon + + reg: + maxItems: 1 + description: > + Address range for the AVS TMON registers + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: tmon + + "#thermal-sensor-cells": + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - "#thermal-sensor-cells" + +examples: + - | + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index a07de5ed0ca6..2d34f3ccb257 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -199,12 +199,11 @@ patternProperties: contribution: $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 100 description: - The percentage contribution of the cooling devices at the - specific trip temperature referenced in this map - to this thermal zone + The cooling contribution to the thermal zone of the referred + cooling device at the referred trip point. The contribution is + a ratio of the sum of all cooling contributions within a + thermal zone. required: - trip diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index c451ae82d8d7..9af1b0f4ecea 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -289,6 +289,8 @@ properties: - sensirion,sgp30 # Sensirion gas sensor with I2C interface - sensirion,sgp40 + # Sensirion temperature & humidity sensor with I2C interface + - sensirion,sht4x # Sensortek 3 axis accelerometer - sensortek,stk8312 # Sensortek 3 axis accelerometer @@ -337,12 +339,19 @@ properties: - ti,tmp122 # Digital Temperature Sensor - ti,tmp275 + # TI DC-DC converter on PMBus + - ti,tps40400 # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus - ti,tps53676 # TI Dual channel DCAP+ multiphase controller TPS53679 - ti,tps53679 # TI Dual channel DCAP+ multiphase controller TPS53688 - ti,tps53688 + # TI DC-DC converters on PMBus + - ti,tps544b20 + - ti,tps544b25 + - ti,tps544c20 + - ti,tps544c25 # Winbond/Nuvoton H/W Monitor - winbond,w83793 # i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt deleted file mode 100644 index c9f52b97cef1..000000000000 --- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt +++ /dev/null @@ -1,29 +0,0 @@ -Broadcom USB Device Controller (BDC) -==================================== - -Required properties: - -- compatible: must be one of: - "brcm,bdc-udc-v2" - "brcm,bdc" -- reg: the base register address and length -- interrupts: the interrupt line for this controller - -Optional properties: - -On Broadcom STB platforms, these properties are required: - -- phys: phandle to one or two USB PHY blocks - NOTE: Some SoC's have a single phy and some have - USB 2.0 and USB 3.0 phys -- clocks: phandle to the functional clock of this block - -Example: - - bdc@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml new file mode 100644 index 000000000000..9e561fee98f1 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom USB Device Controller (BDC) + +maintainers: + - Al Cooper <alcooperx@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bdc-udc-v2 + - brcm,bdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phys: + minItems: 1 + items: + - description: USB 2.0 or 3.0 PHY + - description: USB 3.0 PHY if there is a dedicated 2.0 PHY + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index 43b91ab62004..d3511f48cd55 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -13,6 +13,9 @@ properties: compatible: const: intel,keembay-dwc3 + reg: + maxItems: 1 + clocks: maxItems: 4 diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 25ac2c93dc6c..d29ffcd27472 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -36,6 +36,9 @@ properties: - const: synopsys,dwc3 deprecated: true + reg: + maxItems: 1 + interrupts: description: It's either a single common DWC3 interrupt (dwc_usb3) or individual @@ -65,6 +68,9 @@ properties: - enum: [bus_early, ref, suspend] - true + iommus: + maxItems: 1 + usb-phy: minItems: 1 items: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ae2aaaba620a..c48ce3c54951 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -858,6 +858,8 @@ patternProperties: description: OLIMEX Ltd. "^olpc,.*": description: One Laptop Per Child + "^oneplus,.*": + description: OnePlus Technology (Shenzhen) Co., Ltd. "^onion,.*": description: Onion Corporation "^onnn,.*": @@ -1159,6 +1161,8 @@ patternProperties: description: Summit microelectronics "^sunchip,.*": description: Shenzhen Sunchip Technology Co., Ltd + "^sunplus,.*": + description: Sunplus Technology Co., Ltd. "^SUNW,.*": description: Sun Microsystems, Inc "^supermicro,.*": @@ -1197,6 +1201,8 @@ patternProperties: description: Terasic Inc. "^tfc,.*": description: Three Five Corp + "^thead,.*": + description: T-Head Semiconductor Co., Ltd. "^thine,.*": description: THine Electronics, Inc. "^thingyjp,.*": diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml index 9856cd76c28d..a9635c03761c 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml @@ -22,6 +22,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + atmel,watchdog-type: $ref: /schemas/types.yaml#/definitions/string description: should be hardware or software. diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml index 054584d7543a..2f33635876ff 100644 --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml @@ -34,12 +34,6 @@ properties: power-domains: maxItems: 1 - assigned-clocks: - maxItems: 1 - - assigned-clocks-parents: - maxItems: 1 - required: - compatible - reg diff --git a/MAINTAINERS b/MAINTAINERS index 4430310b46c8..7a07db36e0a3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3730,7 +3730,7 @@ M: Al Cooper <alcooperx@gmail.com> L: linux-usb@vger.kernel.org L: bcm-kernel-feedback-list@broadcom.com S: Maintained -F: Documentation/devicetree/bindings/usb/brcm,bdc.txt +F: Documentation/devicetree/bindings/usb/brcm,bdc.yaml F: drivers/usb/gadget/udc/bdc/ BROADCOM BMIPS CPUFREQ DRIVER @@ -3813,7 +3813,7 @@ M: Doug Berger <opendmb@gmail.com> M: Florian Fainelli <f.fainelli@gmail.com> L: bcm-kernel-feedback-list@broadcom.com S: Supported -F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt +F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml F: drivers/gpio/gpio-brcmstb.c BROADCOM BRCMSTB I2C DRIVER @@ -3871,7 +3871,7 @@ M: Florian Fainelli <f.fainelli@gmail.com> L: bcm-kernel-feedback-list@broadcom.com L: netdev@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +F: Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml F: Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml F: drivers/net/ethernet/broadcom/genet/ F: drivers/net/ethernet/broadcom/unimac.h @@ -3913,7 +3913,7 @@ M: Rafał Miłecki <rafal@milecki.pl> M: bcm-kernel-feedback-list@broadcom.com L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/brcm,amac.txt +F: Documentation/devicetree/bindings/net/brcm,amac.yaml F: drivers/net/ethernet/broadcom/bgmac* F: drivers/net/ethernet/broadcom/unimac.h @@ -3988,7 +3988,7 @@ M: Markus Mayer <mmayer@broadcom.com> M: bcm-kernel-feedback-list@broadcom.com L: linux-pm@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt +F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml F: drivers/thermal/broadcom/brcmstb* BROADCOM STB DPFE DRIVER @@ -4024,6 +4024,7 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/broadcom/bcmsysport.* F: drivers/net/ethernet/broadcom/unimac.h +F: Documentation/devicetree/bindings/net/brcm,systemport.yaml BROADCOM TG3 GIGABIT ETHERNET DRIVER M: Siva Reddy Kallam <siva.kallam@broadcom.com> @@ -17006,10 +17007,8 @@ M: Chanwoo Choi <cw00.choi@samsung.com> L: linux-samsung-soc@vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git -F: Documentation/devicetree/bindings/clock/exynos*.txt F: Documentation/devicetree/bindings/clock/samsung,*.yaml F: Documentation/devicetree/bindings/clock/samsung,s3c* -F: Documentation/devicetree/bindings/clock/samsung,s5p* F: drivers/clk/samsung/ F: include/dt-bindings/clock/exynos*.h F: include/dt-bindings/clock/s3c*.h diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 0135376c5de5..35a87a2da10b 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -53,17 +53,6 @@ void __init device_tree_init(void) unflatten_and_copy_device_tree(); } -static int memory_dtb; - -static int __init early_init_dt_find_memory(unsigned long node, - const char *uname, int depth, void *data) -{ - if (depth == 1 && !strcmp(uname, "memory@0")) - memory_dtb = 1; - - return 0; -} - void __init plat_mem_setup(void) { void *dtb; @@ -77,10 +66,10 @@ void __init plat_mem_setup(void) dtb = get_fdt(); __dt_setup_arch(dtb); - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - else if (soc_info.mem_detect) + if (!early_init_dt_scan_memory()) + return; + + if (soc_info.mem_detect) soc_info.mem_detect(); else if (soc_info.mem_size) memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2e67588f6f6e..ad1230c4f3fe 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -402,7 +402,7 @@ static int __init early_init_dt_scan_chosen_ppc(unsigned long node, const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */ /* Use common scan routine to determine if this is the chosen node */ - if (early_init_dt_scan_chosen(node, uname, depth, data) == 0) + if (early_init_dt_scan_chosen(data) < 0) return 0; #ifdef CONFIG_PPC64 @@ -532,19 +532,18 @@ static int __init early_init_drmem_lmb(struct drmem_lmb *lmb, } #endif /* CONFIG_PPC_PSERIES */ -static int __init early_init_dt_scan_memory_ppc(unsigned long node, - const char *uname, - int depth, void *data) +static int __init early_init_dt_scan_memory_ppc(void) { #ifdef CONFIG_PPC_PSERIES - if (depth == 1 && - strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) { + const void *fdt = initial_boot_params; + int node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory"); + + if (node > 0) walk_drmem_lmbs_early(node, NULL, early_init_drmem_lmb); - return 0; - } + #endif - - return early_init_dt_scan_memory(node, uname, depth, data); + + return early_init_dt_scan_memory(); } /* @@ -748,8 +747,8 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line); /* Scan memory nodes and rebuild MEMBLOCKs */ - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); + early_init_dt_scan_root(); + early_init_dt_scan_memory_ppc(); parse_early_param(); @@ -857,8 +856,8 @@ void __init early_get_first_memblock_info(void *params, phys_addr_t *size) * mess the memblock. */ add_mem_to_memblock = 0; - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); + early_init_dt_scan_root(); + early_init_dt_scan_memory_ppc(); add_mem_to_memblock = 1; if (size) diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c index 6ec978967da0..96c38f971603 100644 --- a/arch/powerpc/mm/nohash/kaslr_booke.c +++ b/arch/powerpc/mm/nohash/kaslr_booke.c @@ -44,9 +44,7 @@ struct regions __initdata regions; static __init void kaslr_get_cmdline(void *fdt) { - int node = fdt_path_offset(fdt, "/chosen"); - - early_init_dt_scan_chosen(node, "chosen", 1, boot_command_line); + early_init_dt_scan_chosen(boot_command_line); } static unsigned long __init rotate_xor(unsigned long hash, const void *area, diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c index b19ce1a83f91..b2c829e95bd1 100644 --- a/drivers/firmware/efi/efi-init.c +++ b/drivers/firmware/efi/efi-init.c @@ -235,6 +235,11 @@ void __init efi_init(void) } reserve_regions(); + /* + * For memblock manipulation, the cap should come after the memblock_add(). + * And now, memblock is fully populated, it is time to do capping. + */ + early_init_dt_check_for_usable_mem_range(); efi_esrt_init(); efi_mokvar_table_init(); diff --git a/drivers/of/base.c b/drivers/of/base.c index 61de453b885c..8a24d37153b4 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -651,6 +651,28 @@ bool of_device_is_available(const struct device_node *device) EXPORT_SYMBOL(of_device_is_available); /** + * __of_device_is_fail - check if a device has status "fail" or "fail-..." + * + * @device: Node to check status for, with locks already held + * + * Return: True if the status property is set to "fail" or "fail-..." (for any + * error code suffix), false otherwise + */ +static bool __of_device_is_fail(const struct device_node *device) +{ + const char *status; + + if (!device) + return false; + + status = __of_get_property(device, "status", NULL); + if (status == NULL) + return false; + + return !strcmp(status, "fail") || !strncmp(status, "fail-", 5); +} + +/** * of_device_is_big_endian - check if a device has BE registers * * @device: Node to check for endianness @@ -796,6 +818,9 @@ EXPORT_SYMBOL(of_get_next_available_child); * of_get_next_cpu_node - Iterate on cpu nodes * @prev: previous child of the /cpus node, or NULL to get first * + * Unusable CPUs (those with the status property set to "fail" or "fail-...") + * will be skipped. + * * Return: A cpu node pointer with refcount incremented, use of_node_put() * on it when done. Returns NULL when prev is the last child. Decrements * the refcount of prev. @@ -817,6 +842,8 @@ struct device_node *of_get_next_cpu_node(struct device_node *prev) of_node_put(node); } for (; next; next = next->sibling) { + if (__of_device_is_fail(next)) + continue; if (!(of_node_name_eq(next, "cpu") || __of_node_is_type(next, "cpu"))) continue; @@ -1349,9 +1376,14 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it) * property data length */ if (it->cur + count > it->list_end) { - pr_err("%pOF: %s = %d found %d\n", - it->parent, it->cells_name, - count, it->cell_count); + if (it->cells_name) + pr_err("%pOF: %s = %d found %td\n", + it->parent, it->cells_name, + count, it->list_end - it->cur); + else + pr_err("%pOF: phandle %s needs %d, found %td\n", + it->parent, of_node_full_name(it->node), + count, it->list_end - it->cur); goto err; } } diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index bdca35284ceb..ca2cfb3012a4 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -482,9 +482,11 @@ static int __init early_init_dt_reserve_memory_arch(phys_addr_t base, if (nomap) { /* * If the memory is already reserved (by another region), we - * should not allow it to be marked nomap. + * should not allow it to be marked nomap, but don't worry + * if the region isn't memory as it won't be mapped. */ - if (memblock_is_region_reserved(base, size)) + if (memblock_overlaps_region(&memblock.memory, base, size) && + memblock_is_region_reserved(base, size)) return -EBUSY; return memblock_mark_nomap(base, size); @@ -965,18 +967,22 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node) elfcorehdr_addr, elfcorehdr_size); } -static phys_addr_t cap_mem_addr; -static phys_addr_t cap_mem_size; +static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND; /** * early_init_dt_check_for_usable_mem_range - Decode usable memory range * location from flat tree - * @node: reference to node containing usable memory range location ('chosen') */ -static void __init early_init_dt_check_for_usable_mem_range(unsigned long node) +void __init early_init_dt_check_for_usable_mem_range(void) { const __be32 *prop; int len; + phys_addr_t cap_mem_addr; + phys_addr_t cap_mem_size; + unsigned long node = chosen_node_offset; + + if ((long)node < 0) + return; pr_debug("Looking for usable-memory-range property... "); @@ -989,6 +995,8 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node) pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr, &cap_mem_size); + + memblock_cap_memory_range(cap_mem_addr, cap_mem_size); } #ifdef CONFIG_SERIAL_EARLYCON @@ -1042,13 +1050,14 @@ int __init early_init_dt_scan_chosen_stdout(void) /* * early_init_dt_scan_root - fetch the top level address and size cells */ -int __init early_init_dt_scan_root(unsigned long node, const char *uname, - int depth, void *data) +int __init early_init_dt_scan_root(void) { const __be32 *prop; + const void *fdt = initial_boot_params; + int node = fdt_path_offset(fdt, "/"); - if (depth != 0) - return 0; + if (node < 0) + return -ENODEV; dt_root_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT; dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT; @@ -1063,8 +1072,7 @@ int __init early_init_dt_scan_root(unsigned long node, const char *uname, dt_root_addr_cells = be32_to_cpup(prop); pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); - /* break now */ - return 1; + return 0; } u64 __init dt_mem_next_cell(int s, const __be32 **cellp) @@ -1078,73 +1086,78 @@ u64 __init dt_mem_next_cell(int s, const __be32 **cellp) /* * early_init_dt_scan_memory - Look for and parse memory nodes */ -int __init early_init_dt_scan_memory(unsigned long node, const char *uname, - int depth, void *data) +int __init early_init_dt_scan_memory(void) { - const char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const __be32 *reg, *endp; - int l; - bool hotpluggable; + int node; + const void *fdt = initial_boot_params; - /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) - return 0; + fdt_for_each_subnode(node, fdt, 0) { + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + bool hotpluggable; - reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); - if (reg == NULL) - reg = of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; + /* We are scanning "memory" nodes only */ + if (type == NULL || strcmp(type, "memory") != 0) + continue; - endp = reg + (l / sizeof(__be32)); - hotpluggable = of_get_flat_dt_prop(node, "hotpluggable", NULL); + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + continue; - pr_debug("memory scan node %s, reg size %d,\n", uname, l); + endp = reg + (l / sizeof(__be32)); + hotpluggable = of_get_flat_dt_prop(node, "hotpluggable", NULL); - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - u64 base, size; + pr_debug("memory scan node %s, reg size %d,\n", + fdt_get_name(fdt, node, NULL), l); - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; - if (size == 0) - continue; - pr_debug(" - %llx, %llx\n", base, size); + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); - early_init_dt_add_memory_arch(base, size); + if (size == 0) + continue; + pr_debug(" - %llx, %llx\n", base, size); - if (!hotpluggable) - continue; + early_init_dt_add_memory_arch(base, size); - if (memblock_mark_hotplug(base, size)) - pr_warn("failed to mark hotplug range 0x%llx - 0x%llx\n", - base, base + size); - } + if (!hotpluggable) + continue; + if (memblock_mark_hotplug(base, size)) + pr_warn("failed to mark hotplug range 0x%llx - 0x%llx\n", + base, base + size); + } + } return 0; } -int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, - int depth, void *data) +int __init early_init_dt_scan_chosen(char *cmdline) { - int l; + int l, node; const char *p; const void *rng_seed; + const void *fdt = initial_boot_params; - pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + node = fdt_path_offset(fdt, "/chosen"); + if (node < 0) + node = fdt_path_offset(fdt, "/chosen@0"); + if (node < 0) + return -ENOENT; - if (depth != 1 || !data || - (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) - return 0; + chosen_node_offset = node; early_init_dt_check_for_initrd(node); early_init_dt_check_for_elfcorehdr(node); - early_init_dt_check_for_usable_mem_range(node); /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) - strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); + strlcpy(cmdline, p, min(l, COMMAND_LINE_SIZE)); /* * CONFIG_CMDLINE is meant to be a default in case nothing else @@ -1153,18 +1166,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, */ #ifdef CONFIG_CMDLINE #if defined(CONFIG_CMDLINE_EXTEND) - strlcat(data, " ", COMMAND_LINE_SIZE); - strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcat(cmdline, " ", COMMAND_LINE_SIZE); + strlcat(cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #elif defined(CONFIG_CMDLINE_FORCE) - strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcpy(cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #else /* No arguments from boot loader, use kernel's cmdl*/ - if (!((char *)data)[0]) - strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + if (!((char *)cmdline)[0]) + strlcpy(cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #endif #endif /* CONFIG_CMDLINE */ - pr_debug("Command line is: %s\n", (char *)data); + pr_debug("Command line is: %s\n", (char *)cmdline); rng_seed = of_get_flat_dt_prop(node, "rng-seed", &l); if (rng_seed && l > 0) { @@ -1178,8 +1191,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, fdt_totalsize(initial_boot_params)); } - /* break now */ - return 1; + return 0; } #ifndef MIN_MEMBLOCK_ADDR @@ -1261,21 +1273,21 @@ bool __init early_init_dt_verify(void *params) void __init early_init_dt_scan_nodes(void) { - int rc = 0; + int rc; /* Initialize {size,address}-cells info */ - of_scan_flat_dt(early_init_dt_scan_root, NULL); + early_init_dt_scan_root(); /* Retrieve various information from the /chosen node */ - rc = of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); - if (!rc) + rc = early_init_dt_scan_chosen(boot_command_line); + if (rc) pr_warn("No chosen node found, continuing without\n"); /* Setup memory, calling early_init_dt_add_memory_arch */ - of_scan_flat_dt(early_init_dt_scan_memory, NULL); + early_init_dt_scan_memory(); /* Handle linux,usable-memory-range property */ - memblock_cap_memory_range(cap_mem_addr, cap_mem_size); + early_init_dt_check_for_usable_mem_range(); } bool __init early_init_dt_scan(void *params) diff --git a/drivers/of/property.c b/drivers/of/property.c index a3483484a5a2..8e90071de6ed 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -1075,6 +1075,17 @@ static struct device_node *of_get_compat_node(struct device_node *np) return np; } +static struct device_node *of_get_compat_node_parent(struct device_node *np) +{ + struct device_node *parent, *node; + + parent = of_get_parent(np); + node = of_get_compat_node(parent); + of_node_put(parent); + + return node; +} + /** * of_link_to_phandle - Add fwnode link to supplier from supplier phandle * @con_np: consumer device tree node @@ -1249,7 +1260,9 @@ static struct device_node *parse_##fname(struct device_node *np, \ * @parse_prop.index: For properties holding a list of phandles, this is the * index into the list * @optional: Describes whether a supplier is mandatory or not - * @node_not_dev: The consumer node containing the property is never a device. + * @node_not_dev: The consumer node containing the property is never converted + * to a struct device. Instead, parse ancestor nodes for the + * compatible property to find a node corresponding to a device. * * Returns: * parse_prop() return values are @@ -1424,7 +1437,7 @@ static int of_link_property(struct device_node *con_np, const char *prop_name) struct device_node *con_dev_np; con_dev_np = s->node_not_dev - ? of_get_compat_node(con_np) + ? of_get_compat_node_parent(con_np) : of_node_get(con_np); matched = true; i++; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 481ba8682ebf..70992103c07d 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -911,11 +911,18 @@ static void __init of_unittest_dma_ranges_one(const char *path, if (!rc) { phys_addr_t paddr; dma_addr_t dma_addr; - struct device dev_bogus; + struct device *dev_bogus; - dev_bogus.dma_range_map = map; - paddr = dma_to_phys(&dev_bogus, expect_dma_addr); - dma_addr = phys_to_dma(&dev_bogus, expect_paddr); + dev_bogus = kzalloc(sizeof(struct device), GFP_KERNEL); + if (!dev_bogus) { + unittest(0, "kzalloc() failed\n"); + kfree(map); + return; + } + + dev_bogus->dma_range_map = map; + paddr = dma_to_phys(dev_bogus, expect_dma_addr); + dma_addr = phys_to_dma(dev_bogus, expect_paddr); unittest(paddr == expect_paddr, "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", @@ -925,6 +932,7 @@ static void __init of_unittest_dma_ranges_one(const char *path, &dma_addr, expect_dma_addr, np); kfree(map); + kfree(dev_bogus); } of_node_put(np); #endif @@ -934,8 +942,9 @@ static void __init of_unittest_parse_dma_ranges(void) { of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", 0x0, 0x20000000); - of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", - 0x100000000, 0x20000000); + if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)) + of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", + 0x100000000, 0x20000000); of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", 0x80000000, 0x20000000); } @@ -1492,7 +1501,7 @@ static int __init unittest_data_add(void) } #ifdef CONFIG_OF_OVERLAY -static int __init overlay_data_apply(const char *overlay_name, int *overlay_id); +static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id); static int unittest_probe(struct platform_device *pdev) { @@ -1657,7 +1666,7 @@ static void __init of_unittest_overlay_gpio(void) * The overlays are applied by overlay_data_apply() * instead of of_unittest_apply_overlay() so that they * will not be tracked. Thus they will not be removed - * by of_unittest_destroy_tracked_overlays(). + * by of_unittest_remove_tracked_overlays(). * * - apply overlay_gpio_01 * - apply overlay_gpio_02a @@ -1905,86 +1914,70 @@ static const char *overlay_name_from_nr(int nr) static const char *bus_path = "/testcase-data/overlay-node/test-bus"; -/* FIXME: it is NOT guaranteed that overlay ids are assigned in sequence */ - -#define MAX_UNITTEST_OVERLAYS 256 -static unsigned long overlay_id_bits[BITS_TO_LONGS(MAX_UNITTEST_OVERLAYS)]; -static int overlay_first_id = -1; +#define MAX_TRACK_OVCS_IDS 256 -static long of_unittest_overlay_tracked(int id) -{ - if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) - return 0; - return overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id); -} +static int track_ovcs_id[MAX_TRACK_OVCS_IDS]; +static int track_ovcs_id_overlay_nr[MAX_TRACK_OVCS_IDS]; +static int track_ovcs_id_cnt; -static void of_unittest_track_overlay(int id) +static void of_unittest_track_overlay(int ovcs_id, int overlay_nr) { - if (overlay_first_id < 0) - overlay_first_id = id; - id -= overlay_first_id; - - if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) + if (WARN_ON(track_ovcs_id_cnt >= MAX_TRACK_OVCS_IDS)) return; - overlay_id_bits[BIT_WORD(id)] |= BIT_MASK(id); + + track_ovcs_id[track_ovcs_id_cnt] = ovcs_id; + track_ovcs_id_overlay_nr[track_ovcs_id_cnt] = overlay_nr; + track_ovcs_id_cnt++; } -static void of_unittest_untrack_overlay(int id) +static void of_unittest_untrack_overlay(int ovcs_id) { - if (overlay_first_id < 0) + if (WARN_ON(track_ovcs_id_cnt < 1)) return; - id -= overlay_first_id; - if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) - return; - overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id); -} -static void of_unittest_destroy_tracked_overlays(void) -{ - int id, ret, defers, ovcs_id; + track_ovcs_id_cnt--; - if (overlay_first_id < 0) - return; + /* If out of synch then test is broken. Do not try to recover. */ + WARN_ON(track_ovcs_id[track_ovcs_id_cnt] != ovcs_id); +} - /* try until no defers */ - do { - defers = 0; - /* remove in reverse order */ - for (id = MAX_UNITTEST_OVERLAYS - 1; id >= 0; id--) { - if (!of_unittest_overlay_tracked(id)) - continue; +static void of_unittest_remove_tracked_overlays(void) +{ + int ret, ovcs_id, overlay_nr, save_ovcs_id; + const char *overlay_name; - ovcs_id = id + overlay_first_id; - ret = of_overlay_remove(&ovcs_id); - if (ret == -ENODEV) { - pr_warn("%s: no overlay to destroy for #%d\n", - __func__, id + overlay_first_id); - continue; - } - if (ret != 0) { - defers++; - pr_warn("%s: overlay destroy failed for #%d\n", - __func__, id + overlay_first_id); - continue; - } + while (track_ovcs_id_cnt > 0) { - of_unittest_untrack_overlay(id); + ovcs_id = track_ovcs_id[track_ovcs_id_cnt - 1]; + overlay_nr = track_ovcs_id_overlay_nr[track_ovcs_id_cnt - 1]; + save_ovcs_id = ovcs_id; + ret = of_overlay_remove(&ovcs_id); + if (ret == -ENODEV) { + overlay_name = overlay_name_from_nr(overlay_nr); + pr_warn("%s: of_overlay_remove() for overlay \"%s\" failed, ret = %d\n", + __func__, overlay_name, ret); } - } while (defers > 0); + of_unittest_untrack_overlay(save_ovcs_id); + } + } -static int __init of_unittest_apply_overlay(int overlay_nr, int *overlay_id) +static int __init of_unittest_apply_overlay(int overlay_nr, int *ovcs_id) { + /* + * The overlay will be tracked, thus it will be removed + * by of_unittest_remove_tracked_overlays(). + */ + const char *overlay_name; overlay_name = overlay_name_from_nr(overlay_nr); - if (!overlay_data_apply(overlay_name, overlay_id)) { - unittest(0, "could not apply overlay \"%s\"\n", - overlay_name); + if (!overlay_data_apply(overlay_name, ovcs_id)) { + unittest(0, "could not apply overlay \"%s\"\n", overlay_name); return -EFAULT; } - of_unittest_track_overlay(*overlay_id); + of_unittest_track_overlay(*ovcs_id, overlay_nr); return 0; } @@ -2029,7 +2022,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, int unittest_nr, int before, int after, enum overlay_type ovtype) { - int ret, ovcs_id, save_id; + int ret, ovcs_id, save_ovcs_id; /* unittest device must be in before state */ if (of_unittest_device_exists(unittest_nr, ovtype) != before) { @@ -2057,7 +2050,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, return -EINVAL; } - save_id = ovcs_id; + save_ovcs_id = ovcs_id; ret = of_overlay_remove(&ovcs_id); if (ret != 0) { unittest(0, "%s failed to be destroyed @\"%s\"\n", @@ -2065,7 +2058,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, unittest_path(unittest_nr, ovtype)); return ret; } - of_unittest_untrack_overlay(save_id); + of_unittest_untrack_overlay(save_ovcs_id); /* unittest device must be again in before state */ if (of_unittest_device_exists(unittest_nr, PDEV_OVERLAY) != before) { @@ -2192,7 +2185,7 @@ static void __init of_unittest_overlay_5(void) /* test overlay application in sequence */ static void __init of_unittest_overlay_6(void) { - int i, ov_id[2], ovcs_id; + int i, save_ovcs_id[2], ovcs_id; int overlay_nr = 6, unittest_nr = 6; int before = 0, after = 1; const char *overlay_name; @@ -2225,8 +2218,8 @@ static void __init of_unittest_overlay_6(void) unittest(0, "could not apply overlay \"%s\"\n", overlay_name); return; } - ov_id[0] = ovcs_id; - of_unittest_track_overlay(ov_id[0]); + save_ovcs_id[0] = ovcs_id; + of_unittest_track_overlay(ovcs_id, overlay_nr + 0); EXPECT_END(KERN_INFO, "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status"); @@ -2242,8 +2235,8 @@ static void __init of_unittest_overlay_6(void) unittest(0, "could not apply overlay \"%s\"\n", overlay_name); return; } - ov_id[1] = ovcs_id; - of_unittest_track_overlay(ov_id[1]); + save_ovcs_id[1] = ovcs_id; + of_unittest_track_overlay(ovcs_id, overlay_nr + 1); EXPECT_END(KERN_INFO, "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status"); @@ -2263,7 +2256,7 @@ static void __init of_unittest_overlay_6(void) } for (i = 1; i >= 0; i--) { - ovcs_id = ov_id[i]; + ovcs_id = save_ovcs_id[i]; if (of_overlay_remove(&ovcs_id)) { unittest(0, "%s failed destroy @\"%s\"\n", overlay_name_from_nr(overlay_nr + i), @@ -2271,7 +2264,7 @@ static void __init of_unittest_overlay_6(void) PDEV_OVERLAY)); return; } - of_unittest_untrack_overlay(ov_id[i]); + of_unittest_untrack_overlay(save_ovcs_id[i]); } for (i = 0; i < 2; i++) { @@ -2294,7 +2287,7 @@ static void __init of_unittest_overlay_6(void) /* test overlay application in sequence */ static void __init of_unittest_overlay_8(void) { - int i, ov_id[2], ovcs_id; + int i, save_ovcs_id[2], ovcs_id; int overlay_nr = 8, unittest_nr = 8; const char *overlay_name; int ret; @@ -2316,8 +2309,8 @@ static void __init of_unittest_overlay_8(void) if (!ret) return; - ov_id[0] = ovcs_id; - of_unittest_track_overlay(ov_id[0]); + save_ovcs_id[0] = ovcs_id; + of_unittest_track_overlay(ovcs_id, overlay_nr + 0); overlay_name = overlay_name_from_nr(overlay_nr + 1); @@ -2335,11 +2328,11 @@ static void __init of_unittest_overlay_8(void) return; } - ov_id[1] = ovcs_id; - of_unittest_track_overlay(ov_id[1]); + save_ovcs_id[1] = ovcs_id; + of_unittest_track_overlay(ovcs_id, overlay_nr + 1); /* now try to remove first overlay (it should fail) */ - ovcs_id = ov_id[0]; + ovcs_id = save_ovcs_id[0]; EXPECT_BEGIN(KERN_INFO, "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); @@ -2356,6 +2349,10 @@ static void __init of_unittest_overlay_8(void) "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); if (!ret) { + /* + * Should never get here. If we do, expect a lot of + * subsequent tracking and overlay removal related errors. + */ unittest(0, "%s was destroyed @\"%s\"\n", overlay_name_from_nr(overlay_nr + 0), unittest_path(unittest_nr, @@ -2365,7 +2362,7 @@ static void __init of_unittest_overlay_8(void) /* removing them in order should work */ for (i = 1; i >= 0; i--) { - ovcs_id = ov_id[i]; + ovcs_id = save_ovcs_id[i]; if (of_overlay_remove(&ovcs_id)) { unittest(0, "%s not destroyed @\"%s\"\n", overlay_name_from_nr(overlay_nr + i), @@ -2373,7 +2370,7 @@ static void __init of_unittest_overlay_8(void) PDEV_OVERLAY)); return; } - of_unittest_untrack_overlay(ov_id[i]); + of_unittest_untrack_overlay(save_ovcs_id[i]); } unittest(1, "overlay test %d passed\n", 8); @@ -2805,7 +2802,7 @@ static void __init of_unittest_overlay(void) of_unittest_overlay_gpio(); - of_unittest_destroy_tracked_overlays(); + of_unittest_remove_tracked_overlays(); out: of_node_put(bus_np); @@ -2837,7 +2834,7 @@ struct overlay_info { uint8_t *dtb_begin; uint8_t *dtb_end; int expected_result; - int overlay_id; + int ovcs_id; char *name; }; @@ -2991,7 +2988,7 @@ void __init unittest_unflatten_overlay_base(void) * * Return 0 on unexpected error. */ -static int __init overlay_data_apply(const char *overlay_name, int *overlay_id) +static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id) { struct overlay_info *info; int found = 0; @@ -3013,9 +3010,9 @@ static int __init overlay_data_apply(const char *overlay_name, int *overlay_id) if (!size) pr_err("no overlay data for %s\n", overlay_name); - ret = of_overlay_fdt_apply(info->dtb_begin, size, &info->overlay_id); - if (overlay_id) - *overlay_id = info->overlay_id; + ret = of_overlay_fdt_apply(info->dtb_begin, size, &info->ovcs_id); + if (ovcs_id) + *ovcs_id = info->ovcs_id; if (ret < 0) goto out; diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index cf48983d3c86..d69ad5bb1eb1 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -58,10 +58,9 @@ extern int of_flat_dt_is_compatible(unsigned long node, const char *name); extern unsigned long of_get_flat_dt_root(void); extern uint32_t of_get_flat_dt_phandle(unsigned long node); -extern int early_init_dt_scan_chosen(unsigned long node, const char *uname, - int depth, void *data); -extern int early_init_dt_scan_memory(unsigned long node, const char *uname, - int depth, void *data); +extern int early_init_dt_scan_chosen(char *cmdline); +extern int early_init_dt_scan_memory(void); +extern void early_init_dt_check_for_usable_mem_range(void); extern int early_init_dt_scan_chosen_stdout(void); extern void early_init_fdt_scan_reserved_mem(void); extern void early_init_fdt_reserve_self(void); @@ -69,8 +68,7 @@ extern void early_init_dt_add_memory_arch(u64 base, u64 size); extern u64 dt_mem_next_cell(int s, const __be32 **cellp); /* Early flat tree scan hooks */ -extern int early_init_dt_scan_root(unsigned long node, const char *uname, - int depth, void *data); +extern int early_init_dt_scan_root(void); extern bool early_init_dt_scan(void *params); extern bool early_init_dt_verify(void *params); @@ -86,6 +84,7 @@ extern void unflatten_and_copy_device_tree(void); extern void early_init_devtree(void *); extern void early_get_first_memblock_info(void *, phys_addr_t *); #else /* CONFIG_OF_EARLY_FLATTREE */ +static inline void early_init_dt_check_for_usable_mem_range(void) {} static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; } static inline void early_init_fdt_scan_reserved_mem(void) {} static inline void early_init_fdt_reserve_self(void) {} |