dt-bindings: net: dsa: convert ksz bindings document to yaml

Convert the bindings document for Microchip KSZ Series Ethernet switches
from txt to yaml. Removed spi-cpha and spi-cpol flags is this should be
handled by the device driver.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 149 insertions, 126 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
deleted file mode 100644
index 95e91e84151c..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-Microchip KSZ Series Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of the following:
-  - "microchip,ksz8765"
-  - "microchip,ksz8794"
-  - "microchip,ksz8795"
-  - "microchip,ksz9477"
-  - "microchip,ksz9897"
-  - "microchip,ksz9896"
-  - "microchip,ksz9567"
-  - "microchip,ksz8565"
-  - "microchip,ksz9893"
-  - "microchip,ksz9563"
-  - "microchip,ksz8563"
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
-			  125MHz instead of 25MHz.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via SPI to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	spi1: spi@f8008000 {
-		pinctrl-0 = <&pinctrl_spi_ksz>;
-		cs-gpios = <&pioC 25 0>;
-		id = <1>;
-
-		ksz9477: ksz9477@0 {
-			compatible = "microchip,ksz9477";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@4 {
-					reg = <4>;
-					label = "lan5";
-				};
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-		ksz8565: ksz8565@0 {
-			compatible = "microchip,ksz8565";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
new file mode 100644
index 000000000000..9f7d131bbcef
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Woojung Huh <Woojung.Huh@microchip.com>
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+  # required and optional properties.
+  compatible:
+    enum:
+      - microchip,ksz8765
+      - microchip,ksz8794
+      - microchip,ksz8795
+      - microchip,ksz9477
+      - microchip,ksz9897
+      - microchip,ksz9896
+      - microchip,ksz9567
+      - microchip,ksz8565
+      - microchip,ksz9893
+      - microchip,ksz9563
+      - microchip,ksz8563
+
+  reset-gpios:
+    description:
+      Should be a gpio specifier for a reset line.
+    maxItems: 1
+
+  microchip,synclko-125:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+    eth0 {
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-0 = <&pinctrl_spi_ksz>;
+        cs-gpios = <&pioC 25 0>;
+        id = <1>;
+
+        ksz9477: switch@0 {
+            compatible = "microchip,ksz9477";
+            reg = <0>;
+            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@4 {
+                    reg = <4>;
+                    label = "lan5";
+                };
+                port@5 {
+                    reg = <5>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+
+        ksz8565: switch@1 {
+            compatible = "microchip,ksz8565";
+            reg = <1>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@6 {
+                    reg = <6>;
+                    label = "cpu";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d36bee3f1f04..8545e72c495c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11487,7 +11487,7 @@ M:	Woojung Huh <woojung.huh@microchip.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/dsa/ksz.txt
+F:	Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
 F:	drivers/net/dsa/microchip/*
 F:	include/linux/platform_data/microchip-ksz.h
 F:	net/dsa/tag_ksz.c