diff options
| author |   Yuval Mintz <Yuval.Mintz@qlogic.com> | 2016-02-21 15:07:26 +0200 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2016-02-21 22:50:54 -0500 |
| commit | 512ab9a001eb88e197859cefbb89b609a971251f (patch) | |
| tree | 0364f9785f1c0644b2db334ca12c9de6290d4aaf | |
| parent | bnx2x: Fix link-forcing for KR2 (diff) | |
| download | linux-dev-512ab9a001eb88e197859cefbb89b609a971251f.tar.xz linux-dev-512ab9a001eb88e197859cefbb89b609a971251f.zip | |
bnx2x: Fix 84833 RX CRC
There's a problem in current 84833 phy configuration -
in case 1Gb link is configured and jumbo-sized packets are being
used, device will experience RX crc errors.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index a529905a5f26..b496e4a7b910 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10416,6 +10416,32 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK; } + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + /* Additional settings for jumbo packets in 1000BASE-T mode */ + /* Allow rx extended length */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, val); + /* TX FIFO Elasticity LSB */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, &val); + val |= 0x1; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, val); + /* TX FIFO Elasticity MSB */ + /* Enable expansion register 0x46 (Pattern Generator status) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf46); + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, val); + } + if (bnx2x_is_8483x_8485x(phy)) { /* Bring PHY out of super isolate mode as the final step. */ bnx2x_cl45_read_and_write(bp, phy, |