aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBen Widawsky <ben.widawsky@intel.com>2022-01-23 16:31:13 -0800
committerDan Williams <dan.j.williams@intel.com>2022-02-08 22:57:31 -0800
commit523e594d9cc03db962c741ce02c8a58aab58a123 (patch)
tree0c8479f68282ffca41e7e82306bbf2961fc8f4e4
parentcxl/pci: Retrieve CXL DVSEC memory info (diff)
downloadlinux-dev-523e594d9cc03db962c741ce02c8a58aab58a123.tar.xz
linux-dev-523e594d9cc03db962c741ce02c8a58aab58a123.zip
cxl/pci: Implement wait for media active
CXL 2.0 8.1.3.8.2 states: Memory_Active: When set, indicates that the CXL Range 1 memory is fully initialized and available for software use. Must be set within Range 1. Memory_Active_Timeout of deassertion of reset to CXL device if CXL.mem HwInit Mode=1 Unfortunately, Memory_Active can take quite a long time depending on media size (up to 256s per 2.0 spec). Provide a callback for the eventual establishment of CXL.mem operations via the 'cxl_mem' driver the 'struct cxl_memdev'. The implementation waits for 60s by default for now and can be overridden by the mbox_ready_time module parameter. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> [djbw: switch to sleeping wait] Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/164298427373.3018233.9309741847039301834.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-rw-r--r--drivers/cxl/cxlmem.h2
-rw-r--r--drivers/cxl/pci.c49
-rw-r--r--tools/testing/cxl/test/mem.c8
3 files changed, 58 insertions, 1 deletions
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 00f55f4066b9..e70838e5dc17 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -132,6 +132,7 @@ struct cxl_endpoint_dvsec_info {
* @component_reg_phys: register base of component registers
* @info: Cached DVSEC information about the device.
* @mbox_send: @dev specific transport for transmitting mailbox commands
+ * @wait_media_ready: @dev specific method to await media ready
*
* See section 8.2.9.5.2 Capacity Configuration and Label Storage for
* details on capacity parameters.
@@ -165,6 +166,7 @@ struct cxl_dev_state {
struct cxl_endpoint_dvsec_info info;
int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
+ int (*wait_media_ready)(struct cxl_dev_state *cxlds);
};
enum cxl_opcode {
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 6b3270246545..c01bd44d11c4 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -49,7 +49,7 @@
static unsigned short mbox_ready_timeout = 60;
module_param(mbox_ready_timeout, ushort, 0644);
MODULE_PARM_DESC(mbox_ready_timeout,
- "seconds to wait for mailbox ready status");
+ "seconds to wait for mailbox ready / memory active status");
static int cxl_pci_mbox_wait_for_doorbell(struct cxl_dev_state *cxlds)
{
@@ -418,6 +418,51 @@ static int wait_for_valid(struct cxl_dev_state *cxlds)
return -ETIMEDOUT;
}
+/*
+ * Wait up to @mbox_ready_timeout for the device to report memory
+ * active.
+ */
+static int wait_for_media_ready(struct cxl_dev_state *cxlds)
+{
+ struct pci_dev *pdev = to_pci_dev(cxlds->dev);
+ int d = cxlds->cxl_dvsec;
+ bool active = false;
+ u64 md_status;
+ int rc, i;
+
+ rc = wait_for_valid(cxlds);
+ if (rc)
+ return rc;
+
+ for (i = mbox_ready_timeout; i; i--) {
+ u32 temp;
+ int rc;
+
+ rc = pci_read_config_dword(
+ pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &temp);
+ if (rc)
+ return rc;
+
+ active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
+ if (active)
+ break;
+ msleep(1000);
+ }
+
+ if (!active) {
+ dev_err(&pdev->dev,
+ "timeout awaiting memory active after %d seconds\n",
+ mbox_ready_timeout);
+ return -ETIMEDOUT;
+ }
+
+ md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET);
+ if (!CXLMDEV_READY(md_status))
+ return -EIO;
+
+ return 0;
+}
+
static int cxl_dvsec_ranges(struct cxl_dev_state *cxlds)
{
struct cxl_endpoint_dvsec_info *info = &cxlds->info;
@@ -528,6 +573,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dev_warn(&pdev->dev,
"Device DVSEC not present, skip CXL.mem init\n");
+ cxlds->wait_media_ready = wait_for_media_ready;
+
rc = cxl_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map);
if (rc)
return rc;
diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
index 8c2086c4caef..3af3f94de0c3 100644
--- a/tools/testing/cxl/test/mem.c
+++ b/tools/testing/cxl/test/mem.c
@@ -4,6 +4,7 @@
#include <linux/platform_device.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/sizes.h>
#include <linux/bits.h>
#include <cxlmem.h>
@@ -236,6 +237,12 @@ static int cxl_mock_mbox_send(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *
return rc;
}
+static int cxl_mock_wait_media_ready(struct cxl_dev_state *cxlds)
+{
+ msleep(100);
+ return 0;
+}
+
static void label_area_release(void *lsa)
{
vfree(lsa);
@@ -262,6 +269,7 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
return PTR_ERR(cxlds);
cxlds->mbox_send = cxl_mock_mbox_send;
+ cxlds->wait_media_ready = cxl_mock_wait_media_ready;
cxlds->payload_size = SZ_4K;
rc = cxl_enumerate_cmds(cxlds);