Merge tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH: "Here's the tty/serial patchset for 4.10-rc1. It's been a quiet kernel cycle for this subsystem, just a small number of changes. A few new serial drivers, and some cleanups to the old vgacon logic, and other minor serial driver changes as well. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: 8250_mid fix calltrace when hotplug 8250 serial controller console: Move userspace I/O out of console_lock to fix lockdep warning tty: nozomi: avoid sprintf buffer overflow serial: 8250_pci: Detach low-level driver during PCI error recovery serial: core: don't check port twice in a row mxs-auart: count FIFO overrun errors serial: 8250_dw: Add support for IrDA SIR mode serial: 8250: Expose set_ldisc function serial: 8250: Add IrDA to UART capabilities serial: 8250_dma: power off device after TX is done serial: 8250_port: export serial8250_rpm_{get|put}_tx() serial: sunsu: Free memory when probe fails serial: sunhv: Free memory when remove() is called vt: fix Scroll Lock LED trigger name tty: typo in comments in drivers/tty/vt/keyboard.c tty: amba-pl011: Add earlycon support for SBSA UART tty: nozomi: use permission-specific DEVICE_ATTR variants tty: serial: Make the STM32 serial port depend on it's arch serial: ifx6x60: Free memory when probe fails serial: ioc4_serial: Free memory when kzalloc fails during probe ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2016-12-13 11:18:24 -0800
committer: Linus Torvalds <torvalds@linux-foundation.org> 2016-12-13 11:18:24 -0800
commit: 5266e70335dac35c35b5ca9cea4251c1389d4a68 (patch)
tree: c8bfdcc37b922a0978ea7aab4a43685ee9f33c3e
parent: Merge tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (diff)
parent: serial: 8250_mid fix calltrace when hotplug 8250 serial controller (diff)
download: linux-dev-5266e70335dac35c35b5ca9cea4251c1389d4a68.tar.xz
linux-dev-5266e70335dac35c35b5ca9cea4251c1389d4a68.zip
46 files changed, 921 insertions, 429 deletions
diff --git a/Documentation/admin-guide/vga-softcursor.rst b/Documentation/admin-guide/vga-softcursor.rst
index a663a745cff4..f52175457e60 100644
--- a/Documentation/admin-guide/vga-softcursor.rst
+++ b/Documentation/admin-guide/vga-softcursor.rst
@@ -4,15 +4,13 @@ Software cursor for VGA
 by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz>
 and Martin Mares <mj@atrey.karlin.mff.cuni.cz>
 
-Linux now has some ability to manipulate cursor appearance. Normally, you
-can set the size of hardware cursor (and also work around some ugly bugs in
-those miserable Trident cards [#f1]_. You can now play a few new tricks:
-you can make your cursor look
-
-like a non-blinking red block, make it inverse background of the character it's
-over or to highlight that character and still choose whether the original
-hardware cursor should remain visible or not.  There may be other things I have
-never thought of.
+Linux now has some ability to manipulate cursor appearance.  Normally,
+you can set the size of hardware cursor.  You can now play a few new
+tricks: you can make your cursor look like a non-blinking red block,
+make it inverse background of the character it's over or to highlight
+that character and still choose whether the original hardware cursor
+should remain visible or not.  There may be other things I have never
+thought of.
 
 The cursor appearance is controlled by a ``<ESC>[?1;2;3c`` escape sequence
 where 1, 2 and 3 are parameters described below. If you omit any of them,
@@ -48,8 +46,6 @@ third parameter
 	Bit setting takes place before bit toggling, so you can simply clear a
 	bit by including it in both the set mask and the toggle mask.
 
-.. [#f1] see ``#define TRIDENT_GLITCH`` in ``drivers/video/vgacon.c``.
-
 Examples
 --------
 
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index b27bccd4390f..821cb41f00e6 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -89,7 +89,7 @@ static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
 }
 
 static void ce4100_serial_fixup(int port, struct uart_port *up,
-	unsigned short *capabilites)
+	u32 *capabilites)
 {
 #ifdef CONFIG_EARLY_PRINTK
 	/*
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 208f573495dc..dfbb974927f2 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1012,8 +1012,6 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
 {
 	struct serial_struct tmp;
    
-	if (!retinfo)
-		return -EFAULT;
 	memset(&tmp, 0, sizeof(tmp));
 	tty_lock(tty);
 	tmp.line = tty->index;
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d6fd0e802ef5..39b3723a32a6 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -63,44 +63,23 @@
 
 #define VERSION_STRING DRIVER_DESC " 2.1d"
 
-/*    Macros definitions */
-
 /* Default debug printout level */
 #define NOZOMI_DEBUG_LEVEL 0x00
-
-#define P_BUF_SIZE 128
-#define NFO(_err_flag_, args...)				\
-do {								\
-	char tmp[P_BUF_SIZE];					\
-	snprintf(tmp, sizeof(tmp), ##args);			\
-	printk(_err_flag_ "[%d] %s(): %s\n", __LINE__,		\
-		__func__, tmp);				\
-} while (0)
-
-#define DBG1(args...) D_(0x01, ##args)
-#define DBG2(args...) D_(0x02, ##args)
-#define DBG3(args...) D_(0x04, ##args)
-#define DBG4(args...) D_(0x08, ##args)
-#define DBG5(args...) D_(0x10, ##args)
-#define DBG6(args...) D_(0x20, ##args)
-#define DBG7(args...) D_(0x40, ##args)
-#define DBG8(args...) D_(0x80, ##args)
-
-#ifdef DEBUG
-/* Do we need this settable at runtime? */
 static int debug = NOZOMI_DEBUG_LEVEL;
+module_param(debug, int, S_IRUGO | S_IWUSR);
 
-#define D(lvl, args...)  do \
-			{if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
-			while (0)
-#define D_(lvl, args...) D(lvl, ##args)
-
-/* These printouts are always printed */
+/*    Macros definitions */
+#define DBG_(lvl, fmt, args...)				\
+do {							\
+	if (lvl & debug)				\
+		pr_debug("[%d] %s(): " fmt "\n",	\
+			 __LINE__, __func__,  ##args);	\
+} while (0)
 
-#else
-static int debug;
-#define D_(lvl, args...)
-#endif
+#define DBG1(args...) DBG_(0x01, ##args)
+#define DBG2(args...) DBG_(0x02, ##args)
+#define DBG3(args...) DBG_(0x04, ##args)
+#define DBG4(args...) DBG_(0x08, ##args)
 
 /* TODO: rewrite to optimize macros... */
 
@@ -1320,7 +1299,7 @@ static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
 
 	return sprintf(buf, "%d\n", dc->card_type);
 }
-static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);
+static DEVICE_ATTR_RO(card_type);
 
 static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
@@ -1329,7 +1308,7 @@ static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
 
 	return sprintf(buf, "%u\n", dc->open_ttys);
 }
-static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);
+static DEVICE_ATTR_RO(open_ttys);
 
 static void make_sysfs_files(struct nozomi *dc)
 {
@@ -1943,7 +1922,5 @@ static __exit void nozomi_exit(void)
 module_init(nozomi_init);
 module_exit(nozomi_exit);
 
-module_param(debug, int, S_IRUGO | S_IWUSR);
-
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index b0cc47c77b40..d66c1edd9892 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1189,8 +1189,6 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
 {
 	struct rocket_config tmp;
 
-	if (!retinfo)
-		return -EFAULT;
 	memset(&tmp, 0, sizeof (tmp));
 	mutex_lock(&info->port.mutex);
 	tmp.line = info->line;
@@ -1255,8 +1253,6 @@ static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
 	struct rocket_ports tmp;
 	int board;
 
-	if (!retports)
-		return -EFAULT;
 	memset(&tmp, 0, sizeof (tmp));
 	tmp.tty_major = rocket_driver->major;
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index a697a8585ddc..ce8d4ffcc425 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -80,6 +80,7 @@ struct serial8250_config {
 #define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
 #define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
 #define UART_CAP_RPM	(1 << 15)	/* Runtime PM is active while idle */
+#define UART_CAP_IRDA	(1 << 16)	/* UART supports IrDA line discipline */
 
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
@@ -129,8 +130,13 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
 }
 
 struct uart_8250_port *serial8250_get_port(int line);
+
 void serial8250_rpm_get(struct uart_8250_port *p);
 void serial8250_rpm_put(struct uart_8250_port *p);
+
+void serial8250_rpm_get_tx(struct uart_8250_port *p);
+void serial8250_rpm_put_tx(struct uart_8250_port *p);
+
 int serial8250_em485_init(struct uart_8250_port *p);
 void serial8250_em485_destroy(struct uart_8250_port *p);
 
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 240a361b674f..61569a765d9e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -425,10 +425,10 @@ struct uart_8250_port *serial8250_get_port(int line)
 EXPORT_SYMBOL_GPL(serial8250_get_port);
 
 static void (*serial8250_isa_config)(int port, struct uart_port *up,
-	unsigned short *capabilities);
+	u32 *capabilities);
 
 void serial8250_set_isa_configurator(
-	void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+	void (*v)(int port, struct uart_port *up, u32 *capabilities))
 {
 	serial8250_isa_config = v;
 }
@@ -830,6 +830,7 @@ static int serial8250_probe(struct platform_device *dev)
 		uart.port.handle_irq	= p->handle_irq;
 		uart.port.handle_break	= p->handle_break;
 		uart.port.set_termios	= p->set_termios;
+		uart.port.set_ldisc	= p->set_ldisc;
 		uart.port.get_mctrl	= p->get_mctrl;
 		uart.port.pm		= p->pm;
 		uart.port.dev		= &dev->dev;
@@ -1023,6 +1024,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		/*  Possibly override set_termios call */
 		if (up->port.set_termios)
 			uart->port.set_termios = up->port.set_termios;
+		if (up->port.set_ldisc)
+			uart->port.set_ldisc = up->port.set_ldisc;
 		if (up->port.get_mctrl)
 			uart->port.get_mctrl = up->port.get_mctrl;
 		if (up->port.set_mctrl)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index fdbddbc6375d..26f17456b0d7 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -72,10 +72,15 @@ int serial8250_tx_dma(struct uart_8250_port *p)
 	struct dma_async_tx_descriptor	*desc;
 	int ret;
 
-	if (uart_tx_stopped(&p->port) || dma->tx_running ||
-	    uart_circ_empty(xmit))
+	if (dma->tx_running)
 		return 0;
 
+	if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
+		/* We have been called from __dma_tx_complete() */
+		serial8250_rpm_put_tx(p);
+		return 0;
+	}
+
 	dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 
 	desc = dmaengine_prep_slave_single(dma->txchan,
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 459d726f9d59..c89fafc972b6 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -53,6 +53,8 @@
 /* Helper for fifo size calculation */
 #define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)
 
+/* DesignWare specific register fields */
+#define DW_UART_MCR_SIRE		BIT(6)
 
 struct dw8250_data {
 	u8			usr_reg;
@@ -254,6 +256,22 @@ out:
 	serial8250_do_set_termios(p, termios, old);
 }
 
+static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
+{
+	struct uart_8250_port *up = up_to_u8250p(p);
+	unsigned int mcr = p->serial_in(p, UART_MCR);
+
+	if (up->capabilities & UART_CAP_IRDA) {
+		if (termios->c_line == N_IRDA)
+			mcr |= DW_UART_MCR_SIRE;
+		else
+			mcr &= ~DW_UART_MCR_SIRE;
+
+		p->serial_out(p, UART_MCR, mcr);
+	}
+	serial8250_do_set_ldisc(p, termios);
+}
+
 /*
  * dw8250_fallback_dma_filter will prevent the UART from getting just any free
  * channel on platforms that have DMA engines, but don't have any channels
@@ -357,6 +375,9 @@ static void dw8250_setup_port(struct uart_port *p)
 
 	if (reg & DW_UART_CPR_AFCE_MODE)
 		up->capabilities |= UART_CAP_AFE;
+
+	if (reg & DW_UART_CPR_SIR_MODE)
+		up->capabilities |= UART_CAP_IRDA;
 }
 
 static int dw8250_probe(struct platform_device *pdev)
@@ -392,6 +413,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	p->iotype	= UPIO_MEM;
 	p->serial_in	= dw8250_serial_in;
 	p->serial_out	= dw8250_serial_out;
+	p->set_ldisc	= dw8250_set_ldisc;
 
 	p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
 	if (!p->membase)
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 0facc789fe7d..b67e7a544935 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -21,8 +21,11 @@
 #define EXIT_KEY 0xAA
 #define CHIP_ID1  0x20
 #define CHIP_ID2  0x21
-#define CHIP_ID_0 0x1602
-#define CHIP_ID_1 0x0501
+#define CHIP_ID_F81865 0x0407
+#define CHIP_ID_F81866 0x1010
+#define CHIP_ID_F81216AD 0x1602
+#define CHIP_ID_F81216H 0x0501
+#define CHIP_ID_F81216 0x0802
 #define VENDOR_ID1 0x23
 #define VENDOR_ID1_VAL 0x19
 #define VENDOR_ID2 0x24
@@ -43,12 +46,60 @@
 #define RXW4C_IRA BIT(3)
 #define TXW4C_IRA BIT(2)
 
+#define FIFO_CTRL		0xF6
+#define FIFO_MODE_MASK		(BIT(1) | BIT(0))
+#define FIFO_MODE_128		(BIT(1) | BIT(0))
+#define RXFTHR_MODE_MASK	(BIT(5) | BIT(4))
+#define RXFTHR_MODE_4X		BIT(5)
+
+#define F81216_LDN_LOW	0x0
+#define F81216_LDN_HIGH	0x4
+
+/*
+ * F81866 registers
+ *
+ * The IRQ setting mode of F81866 is not the same with F81216 series.
+ *	Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
+ *	Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ */
+#define F81866_IRQ_MODE		0xf0
+#define F81866_IRQ_SHARE	BIT(0)
+#define F81866_IRQ_MODE0	BIT(1)
+
+#define F81866_FIFO_CTRL	FIFO_CTRL
+#define F81866_IRQ_MODE1	BIT(3)
+
+#define F81866_LDN_LOW		0x10
+#define F81866_LDN_HIGH		0x16
+
 struct fintek_8250 {
+	u16 pid;
 	u16 base_port;
 	u8 index;
 	u8 key;
 };
 
+static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg)
+{
+	outb(reg, pdata->base_port + ADDR_PORT);
+	return inb(pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_reg(struct fintek_8250 *pdata, u8 reg, u8 data)
+{
+	outb(reg, pdata->base_port + ADDR_PORT);
+	outb(data, pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_mask_reg(struct fintek_8250 *pdata, u8 reg, u8 mask,
+			       u8 data)
+{
+	u8 tmp;
+
+	tmp = (sio_read_reg(pdata, reg) & ~mask) | (mask & data);
+	sio_write_reg(pdata, reg, tmp);
+}
+
 static int fintek_8250_enter_key(u16 base_port, u8 key)
 {
 	if (!request_muxed_region(base_port, 2, "8250_fintek"))
@@ -66,29 +117,55 @@ static void fintek_8250_exit_key(u16 base_port)
 	release_region(base_port + ADDR_PORT, 2);
 }
 
-static int fintek_8250_check_id(u16 base_port)
+static int fintek_8250_check_id(struct fintek_8250 *pdata)
 {
 	u16 chip;
 
-	outb(VENDOR_ID1, base_port + ADDR_PORT);
-	if (inb(base_port + DATA_PORT) != VENDOR_ID1_VAL)
+	if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL)
 		return -ENODEV;
 
-	outb(VENDOR_ID2, base_port + ADDR_PORT);
-	if (inb(base_port + DATA_PORT) != VENDOR_ID2_VAL)
+	if (sio_read_reg(pdata, VENDOR_ID2) != VENDOR_ID2_VAL)
 		return -ENODEV;
 
-	outb(CHIP_ID1, base_port + ADDR_PORT);
-	chip = inb(base_port + DATA_PORT);
-	outb(CHIP_ID2, base_port + ADDR_PORT);
-	chip |= inb(base_port + DATA_PORT) << 8;
-
-	if (chip != CHIP_ID_0 && chip != CHIP_ID_1)
+	chip = sio_read_reg(pdata, CHIP_ID1);
+	chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
+
+	switch (chip) {
+	case CHIP_ID_F81865:
+	case CHIP_ID_F81866:
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		break;
+	default:
 		return -ENODEV;
+	}
 
+	pdata->pid = chip;
 	return 0;
 }
 
+static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
+				     int *max)
+{
+	switch (pdata->pid) {
+	case CHIP_ID_F81865:
+	case CHIP_ID_F81866:
+		*min = F81866_LDN_LOW;
+		*max = F81866_LDN_HIGH;
+		return 0;
+
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		*min = F81216_LDN_LOW;
+		*max = F81216_LDN_HIGH;
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
 static int fintek_8250_rs485_config(struct uart_port *port,
 			      struct serial_rs485 *rs485)
 {
@@ -128,10 +205,8 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	if (fintek_8250_enter_key(pdata->base_port, pdata->key))
 		return -EBUSY;
 
-	outb(LDN, pdata->base_port + ADDR_PORT);
-	outb(pdata->index, pdata->base_port + DATA_PORT);
-	outb(RS485, pdata->base_port + ADDR_PORT);
-	outb(config, pdata->base_port + DATA_PORT);
+	sio_write_reg(pdata, LDN, pdata->index);
+	sio_write_reg(pdata, RS485, config);
 	fintek_8250_exit_key(pdata->base_port);
 
 	port->rs485 = *rs485;
@@ -139,40 +214,90 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	return 0;
 }
 
-static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
+static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
+{
+	sio_write_reg(pdata, LDN, pdata->index);
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81866:
+		sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
+				   0);
+		/* fall through */
+	case CHIP_ID_F81865:
+		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
+				   F81866_IRQ_SHARE);
+		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_MODE0,
+				   is_level ? 0 : F81866_IRQ_MODE0);
+		break;
+
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
+				   IRQ_SHARE);
+		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
+				   is_level ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
+		break;
+	}
+}
+
+static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
+{
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H: /* 128Bytes FIFO */
+	case CHIP_ID_F81866:
+		sio_write_mask_reg(pdata, FIFO_CTRL,
+				   FIFO_MODE_MASK | RXFTHR_MODE_MASK,
+				   FIFO_MODE_128 | RXFTHR_MODE_4X);
+		break;
+
+	default: /* Default 16Bytes FIFO */
+		break;
+	}
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
+			  unsigned int irq)
 {
 	static const u16 addr[] = {0x4e, 0x2e};
 	static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
-	int i, j, k;
+	struct irq_data *irq_data;
+	bool level_mode = false;
+	int i, j, k, min, max;
 
 	for (i = 0; i < ARRAY_SIZE(addr); i++) {
 		for (j = 0; j < ARRAY_SIZE(keys); j++) {
+			pdata->base_port = addr[i];
+			pdata->key = keys[j];
 
 			if (fintek_8250_enter_key(addr[i], keys[j]))
 				continue;
-			if (fintek_8250_check_id(addr[i])) {
+			if (fintek_8250_check_id(pdata) ||
+			    fintek_8250_get_ldn_range(pdata, &min, &max)) {
 				fintek_8250_exit_key(addr[i]);
 				continue;
 			}
 
-			for (k = 0; k < 4; k++) {
+			for (k = min; k < max; k++) {
 				u16 aux;
 
-				outb(LDN, addr[i] + ADDR_PORT);
-				outb(k, addr[i] + DATA_PORT);
-
-				outb(IO_ADDR1, addr[i] + ADDR_PORT);
-				aux = inb(addr[i] + DATA_PORT);
-				outb(IO_ADDR2, addr[i] + ADDR_PORT);
-				aux |= inb(addr[i] + DATA_PORT) << 8;
+				sio_write_reg(pdata, LDN, k);
+				aux = sio_read_reg(pdata, IO_ADDR1);
+				aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
 				if (aux != io_address)
 					continue;
 
-				fintek_8250_exit_key(addr[i]);
-				pdata->key = keys[j];
-				pdata->base_port = addr[i];
 				pdata->index = k;
 
+				irq_data = irq_get_irq_data(irq);
+				if (irq_data)
+					level_mode =
+						irqd_is_level_type(irq_data);
+
+				fintek_8250_set_irq_mode(pdata, level_mode);
+				fintek_8250_set_max_fifo(pdata);
+				fintek_8250_exit_key(addr[i]);
+
 				return 0;
 			}
 
@@ -183,39 +308,29 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
 	return -ENODEV;
 }
 
-static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
+static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 {
-	int status;
-	u8 tmp;
-
-	status = fintek_8250_enter_key(pdata->base_port, pdata->key);
-	if (status)
-		return status;
-
-	outb(LDN, pdata->base_port + ADDR_PORT);
-	outb(pdata->index, pdata->base_port + DATA_PORT);
-
-	outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
-	tmp = inb(pdata->base_port + DATA_PORT);
-
-	tmp &= ~IRQ_MODE_MASK;
-	tmp |= IRQ_SHARE;
-	if (!level_mode)
-		tmp |= IRQ_EDGE_HIGH;
-
-	outb(tmp, pdata->base_port + DATA_PORT);
-	fintek_8250_exit_key(pdata->base_port);
-	return 0;
+	struct fintek_8250 *pdata = uart->port.private_data;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81866:
+	case CHIP_ID_F81865:
+		uart->port.rs485_config = fintek_8250_rs485_config;
+		break;
+
+	default: /* No RS485 Auto direction functional */
+		break;
+	}
 }
 
 int fintek_8250_probe(struct uart_8250_port *uart)
 {
 	struct fintek_8250 *pdata;
 	struct fintek_8250 probe_data;
-	struct irq_data *irq_data = irq_get_irq_data(uart->port.irq);
-	bool level_mode = irqd_is_level_type(irq_data);
 
-	if (find_base_port(&probe_data, uart->port.iobase))
+	if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
 		return -ENODEV;
 
 	pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
@@ -223,8 +338,8 @@ int fintek_8250_probe(struct uart_8250_port *uart)
 		return -ENOMEM;
 
 	memcpy(pdata, &probe_data, sizeof(probe_data));
-	uart->port.rs485_config = fintek_8250_rs485_config;
 	uart->port.private_data = pdata;
+	fintek_8250_set_rs485_handler(uart);
 
-	return fintek_8250_set_irq_mode(pdata, level_mode);
+	return 0;
 }
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index b9923464599f..f607946fd996 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -174,7 +174,7 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
 	int ret;
 
 	chip->dev = &pdev->dev;
-	chip->irq = pdev->irq;
+	chip->irq = pci_irq_vector(pdev, 0);
 	chip->regs = pci_ioremap_bar(pdev, 1);
 	chip->pdata = &qrk_serial_dma_pdata;
 
@@ -183,6 +183,9 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
 	if (ret)
 		return;
 
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
 	/* Special DMA address for UART */
 	dma->rx_dma_addr = 0xfffff000;
 	dma->tx_dma_addr = 0xfffff000;
@@ -280,8 +283,6 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (ret)
 		return ret;
 
-	pci_set_master(pdev);
-
 	lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
 	if (!lpss)
 		return -ENOMEM;
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index 39c2324484dd..ac013edf4992 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -303,10 +303,10 @@ static void mid8250_remove(struct pci_dev *pdev)
 {
 	struct mid8250 *mid = pci_get_drvdata(pdev);
 
+	serial8250_unregister_port(mid->line);
+
 	if (mid->board->exit)
 		mid->board->exit(mid);
-
-	serial8250_unregister_port(mid->line);
 }
 
 static const struct mid8250_board pnw_board = {
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 7a8b5fc81a19..d25ab1cd4295 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -332,8 +332,6 @@ static const struct of_device_id of_platform_serial_table[] = {
 		.data = (void *)PORT_ALTR_16550_F128, },
 	{ .compatible = "mrvl,mmp-uart",
 		.data = (void *)PORT_XSCALE, },
-	{ .compatible = "mrvl,pxa-uart",
-		.data = (void *)PORT_XSCALE, },
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, of_platform_serial_table);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b98c1578f45a..aa0166b6d450 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -52,6 +52,7 @@ struct serial_private {
 	struct pci_dev		*dev;
 	unsigned int		nr;
 	struct pci_serial_quirk	*quirk;
+	const struct pciserial_board *board;
 	int			line[0];
 };
 
@@ -1329,6 +1330,30 @@ static int pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int pci_pericom_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset, maxnr;
+
+	bar = FL_GET_BASE(board->flags);
+	if (board->flags & FL_BASE_BARS)
+		bar += idx;
+	else
+		offset += idx * board->uart_offset;
+
+	if (idx==3)
+		offset = 0x38;
+
+	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+		(board->reg_shift + 3);
+
+	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+		return 1;
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
 static int
 ce4100_serial_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -2096,6 +2121,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.exit		= pci_plx9050_exit,
 	},
 	/*
+	 * Pericom (Only 7954 - It have a offset jump for port 4)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_PERICOM,
+		.device		= PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_pericom_setup,
+	},
+	/*
 	 * PLX
 	 */
 	{
@@ -3862,6 +3897,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 		}
 	}
 	priv->nr = i;
+	priv->board = board;
 	return priv;
 
 err_deinit:
@@ -3872,7 +3908,7 @@ err_out:
 }
 EXPORT_SYMBOL_GPL(pciserial_init_ports);
 
-void pciserial_remove_ports(struct serial_private *priv)
+void pciserial_detach_ports(struct serial_private *priv)
 {
 	struct pci_serial_quirk *quirk;
 	int i;
@@ -3886,7 +3922,11 @@ void pciserial_remove_ports(struct serial_private *priv)
 	quirk = find_quirk(priv->dev);
 	if (quirk->exit)
 		quirk->exit(priv->dev);
+}
 
+void pciserial_remove_ports(struct serial_private *priv)
+{
+	pciserial_detach_ports(priv);
 	kfree(priv);
 }
 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
@@ -5577,7 +5617,7 @@ static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	if (priv)
-		pciserial_suspend_ports(priv);
+		pciserial_detach_ports(priv);
 
 	pci_disable_device(dev);
 
@@ -5602,9 +5642,18 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
 static void serial8250_io_resume(struct pci_dev *dev)
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
+	const struct pciserial_board *board;
 
-	if (priv)
-		pciserial_resume_ports(priv);
+	if (!priv)
+		return;
+
+	board = priv->board;
+	kfree(priv);
+	priv = pciserial_init_ports(dev, board);
+
+	if (!IS_ERR(priv)) {
+		pci_set_drvdata(dev, priv);
+	}
 }
 
 static const struct pci_error_handlers serial8250_err_handler = {
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1731b98d2471..fe4399b41df6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -636,7 +636,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
  * once and disable_runtime_pm_tx() will still disable RPM because the fifo is
  * empty and the HW can idle again.
  */
-static void serial8250_rpm_get_tx(struct uart_8250_port *p)
+void serial8250_rpm_get_tx(struct uart_8250_port *p)
 {
 	unsigned char rpm_active;
 
@@ -648,8 +648,9 @@ static void serial8250_rpm_get_tx(struct uart_8250_port *p)
 		return;
 	pm_runtime_get_sync(p->port.dev);
 }
+EXPORT_SYMBOL_GPL(serial8250_rpm_get_tx);
 
-static void serial8250_rpm_put_tx(struct uart_8250_port *p)
+void serial8250_rpm_put_tx(struct uart_8250_port *p)
 {
 	unsigned char rpm_active;
 
@@ -662,6 +663,7 @@ static void serial8250_rpm_put_tx(struct uart_8250_port *p)
 	pm_runtime_mark_last_busy(p->port.dev);
 	pm_runtime_put_autosuspend(p->port.dev);
 }
+EXPORT_SYMBOL_GPL(serial8250_rpm_put_tx);
 
 /*
  * IER sleep support.  UARTs which have EFRs need the "extended
@@ -2691,8 +2693,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 		serial8250_do_set_termios(port, termios, old);
 }
 
-static void
-serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
+void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios)
 {
 	if (termios->c_line == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
@@ -2708,7 +2709,16 @@ serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
 		}
 	}
 }
+EXPORT_SYMBOL_GPL(serial8250_do_set_ldisc);
 
+static void
+serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
+{
+	if (port->set_ldisc)
+		port->set_ldisc(port, termios);
+	else
+		serial8250_do_set_ldisc(port, termios);
+}
 
 void serial8250_do_pm(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
new file mode 100644
index 000000000000..4d68731af534
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -0,0 +1,190 @@
+/*
+ *  drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS
+ *  Copyright:	(C) 2013 Sergei Ianovich <ynvich@gmail.com>
+ *
+ *  replaces drivers/serial/pxa.c by Nicolas Pitre
+ *  Created:	Feb 20, 2003
+ *  Copyright:	(C) 2003 Monta Vista Software, Inc.
+ *
+ *  Based on drivers/serial/8250.c by Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+#include "8250.h"
+
+struct pxa8250_data {
+	int			line;
+	struct clk		*clk;
+};
+
+static int __maybe_unused serial_pxa_suspend(struct device *dev)
+{
+	struct pxa8250_data *data = dev_get_drvdata(dev);
+
+	serial8250_suspend_port(data->line);
+
+	return 0;
+}
+
+static int __maybe_unused serial_pxa_resume(struct device *dev)
+{
+	struct pxa8250_data *data = dev_get_drvdata(dev);
+
+	serial8250_resume_port(data->line);
+
+	return 0;
+}
+
+static const struct dev_pm_ops serial_pxa_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(serial_pxa_suspend, serial_pxa_resume)
+};
+
+static const struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+/* Uart divisor latch write */
+static void serial_pxa_dl_write(struct uart_8250_port *up, int value)
+{
+	unsigned int dll;
+
+	serial_out(up, UART_DLL, value & 0xff);
+	/*
+	 * work around Erratum #74 according to Marvel(R) PXA270M Processor
+	 * Specification Update (April 19, 2010)
+	 */
+	dll = serial_in(up, UART_DLL);
+	WARN_ON(dll != (value & 0xff));
+
+	serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+
+static void serial_pxa_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	struct pxa8250_data *data = port->private_data;
+
+	if (!state)
+		clk_prepare_enable(data->clk);
+	else
+		clk_disable_unprepare(data->clk);
+}
+
+static int serial_pxa_probe(struct platform_device *pdev)
+{
+	struct uart_8250_port uart = {};
+	struct pxa8250_data *data;
+	struct resource *mmres, *irqres;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare(data->clk);
+	if (ret)
+		return ret;
+
+	uart.port.type = PORT_XSCALE;
+	uart.port.iotype = UPIO_MEM32;
+	uart.port.mapbase = mmres->start;
+	uart.port.regshift = 2;
+	uart.port.irq = irqres->start;
+	uart.port.fifosize = 64;
+	uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST;
+	uart.port.dev = &pdev->dev;
+	uart.port.uartclk = clk_get_rate(data->clk);
+	uart.port.pm = serial_pxa_pm;
+	uart.port.private_data = data;
+	uart.dl_write = serial_pxa_dl_write;
+
+	ret = serial8250_register_8250_port(&uart);
+	if (ret < 0)
+		goto err_clk;
+
+	data->line = ret;
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+ err_clk:
+	clk_unprepare(data->clk);
+	return ret;
+}
+
+static int serial_pxa_remove(struct platform_device *pdev)
+{
+	struct pxa8250_data *data = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(data->line);
+
+	clk_unprepare(data->clk);
+
+	return 0;
+}
+
+static struct platform_driver serial_pxa_driver = {
+	.probe          = serial_pxa_probe,
+	.remove         = serial_pxa_remove,
+
+	.driver		= {
+		.name	= "pxa2xx-uart",
+		.pm	= &serial_pxa_pm_ops,
+		.of_match_table = serial_pxa_dt_ids,
+	},
+};
+
+module_platform_driver(serial_pxa_driver);
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init early_serial_pxa_setup(struct earlycon_device *device,
+				  const char *options)
+{
+	struct uart_port *port = &device->port;
+
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+
+	port->regshift = 2;
+	return early_serial8250_setup(device, NULL);
+}
+OF_EARLYCON_DECLARE(early_pxa, "mrvl,pxa-uart", early_serial_pxa_setup);
+#endif
+
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-uart");
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 417d9e7038e1..746680ebf90c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -24,10 +24,22 @@
 /* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */
 #define UNIPHIER_UART_DEFAULT_FIFO_SIZE	64
 
-#define UNIPHIER_UART_CHAR_FCR	3	/* Character / FIFO Control Register */
-#define UNIPHIER_UART_LCR_MCR	4	/* Line/Modem Control Register */
-#define   UNIPHIER_UART_LCR_SHIFT	8
-#define UNIPHIER_UART_DLR	9	/* Divisor Latch Register */
+/*
+ * This hardware is similar to 8250, but its register map is a bit different:
+ *   - MMIO32 (regshift = 2)
+ *   - FCR is not at 2, but 3
+ *   - LCR and MCR are not at 3 and 4, they share 4
+ *   - Divisor latch at 9, no divisor latch access bit
+ */
+
+#define UNIPHIER_UART_REGSHIFT		2
+
+/* bit[15:8] = CHAR (not used), bit[7:0] = FCR */
+#define UNIPHIER_UART_CHAR_FCR		(3 << (UNIPHIER_UART_REGSHIFT))
+/* bit[15:8] = LCR, bit[7:0] = MCR */
+#define UNIPHIER_UART_LCR_MCR		(4 << (UNIPHIER_UART_REGSHIFT))
+/* Divisor Latch Register */
+#define UNIPHIER_UART_DLR		(9 << (UNIPHIER_UART_REGSHIFT))
 
 struct uniphier8250_priv {
 	int line;
@@ -44,7 +56,7 @@ static int __init uniphier_early_console_setup(struct earlycon_device *device,
 
 	/* This hardware always expects MMIO32 register interface. */
 	device->port.iotype = UPIO_MEM32;
-	device->port.regshift = 2;
+	device->port.regshift = UNIPHIER_UART_REGSHIFT;
 
 	/*
 	 * Do not touch the divisor register in early_serial8250_setup();
@@ -68,17 +80,16 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
 
 	switch (offset) {
 	case UART_LCR:
-		valshift = UNIPHIER_UART_LCR_SHIFT;
+		valshift = 8;
 		/* fall through */
 	case UART_MCR:
 		offset = UNIPHIER_UART_LCR_MCR;
 		break;
 	default:
+		offset <<= UNIPHIER_UART_REGSHIFT;
 		break;
 	}
 
-	offset <<= p->regshift;
-
 	/*
 	 * The return value must be masked with 0xff because LCR and MCR reside
 	 * in the same register that must be accessed by 32-bit write/read.
@@ -90,27 +101,26 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
 static void uniphier_serial_out(struct uart_port *p, int offset, int value)
 {
 	unsigned int valshift = 0;
-	bool normal = false;
+	bool normal = true;
 
 	switch (offset) {
 	case UART_FCR:
 		offset = UNIPHIER_UART_CHAR_FCR;
 		break;
 	case UART_LCR:
-		valshift = UNIPHIER_UART_LCR_SHIFT;
+		valshift = 8;
 		/* Divisor latch access bit does not exist. */
 		value &= ~UART_LCR_DLAB;
 		/* fall through */
 	case UART_MCR:
 		offset = UNIPHIER_UART_LCR_MCR;
+		normal = false;
 		break;
 	default:
-		normal = true;
+		offset <<= UNIPHIER_UART_REGSHIFT;
 		break;
 	}
 
-	offset <<= p->regshift;
-
 	if (normal) {
 		writel(value, p->membase + offset);
 	} else {
@@ -139,16 +149,12 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
  */
 static int uniphier_serial_dl_read(struct uart_8250_port *up)
 {
-	int offset = UNIPHIER_UART_DLR << up->port.regshift;
-
-	return readl(up->port.membase + offset);
+	return readl(up->port.membase + UNIPHIER_UART_DLR);
 }
 
 static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
 {
-	int offset = UNIPHIER_UART_DLR << up->port.regshift;
-
-	writel(value, up->port.membase + offset);
+	writel(value, up->port.membase + UNIPHIER_UART_DLR);
 }
 
 static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
@@ -234,7 +240,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 
 	up.port.type = PORT_16550A;
 	up.port.iotype = UPIO_MEM32;
-	up.port.regshift = 2;
+	up.port.regshift = UNIPHIER_UART_REGSHIFT;
 	up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	up.capabilities = UART_CAP_FIFO;
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 899834776b36..0b8b6740ba43 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -439,6 +439,16 @@ config SERIAL_8250_MOXA
 	  This driver can also be built as a module. The module will be called
 	  8250_moxa. If you want to do that, say M here.
 
+config SERIAL_8250_PXA
+	tristate "PXA serial port support"
+	depends on SERIAL_8250
+	depends on ARCH_PXA || ARCH_MMP
+	help
+	  If you have a machine based on an Intel XScale PXA2xx CPU you can
+	  enable its onboard serial ports by enabling this option. The option is
+	  applicable to both devicetree and legacy boards, and early console is
+	  part of its support.
+
 config SERIAL_OF_PLATFORM
 	tristate "Devicetree based probing for 8250 ports"
 	depends on SERIAL_8250 && OF
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 276c6fb60337..850e721877a9 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_LPSS)		+= 8250_lpss.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
 obj-$(CONFIG_SERIAL_8250_MOXA)		+= 8250_moxa.o
+obj-$(CONFIG_SERIAL_8250_PXA)		+= 8250_pxa.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)	+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 25c1d7bc0100..e9cf5b67f1b7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -438,17 +438,27 @@ config SERIAL_MPSC_CONSOLE
 	  Say Y here if you want to support a serial console on a Marvell MPSC.
 
 config SERIAL_PXA
-	bool "PXA serial port support"
+	bool "PXA serial port support (DEPRECATED)"
 	depends on ARCH_PXA || ARCH_MMP
 	select SERIAL_CORE
+	select SERIAL_8250_PXA if SERIAL_8250=y
+	select SERIAL_PXA_NON8250 if !SERIAL_8250=y
 	help
 	  If you have a machine based on an Intel XScale PXA2xx CPU you
 	  can enable its onboard serial ports by enabling this option.
 
+	  Unless you have a specific need, you should use SERIAL_8250_PXA
+	  instead of this.
+
+config SERIAL_PXA_NON8250
+	bool
+	depends on !SERIAL_8250
+
 config SERIAL_PXA_CONSOLE
-	bool "Console on PXA serial port"
+	bool "Console on PXA serial port (DEPRECATED)"
 	depends on SERIAL_PXA
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE if SERIAL_8250=y
 	help
 	  If you have enabled the serial port on the Intel XScale PXA
 	  CPU you can make it the console by answering Y to this option.
@@ -460,6 +470,9 @@ config SERIAL_PXA_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+	  Unless you have a specific need, you should use SERIAL_8250_PXA
+	  and SERIAL_8250_CONSOLE instead of this.
+
 config SERIAL_SA1100
 	bool "SA1100 serial port support"
 	depends on ARCH_SA1100
@@ -1626,7 +1639,7 @@ config SERIAL_STM32
 	tristate "STMicroelectronics STM32 serial port support"
 	select SERIAL_CORE
 	depends on HAS_DMA
-	depends on ARM || COMPILE_TEST
+	depends on ARCH_STM32 || COMPILE_TEST
 	help
 	  This driver is for the on-chip Serial Controller on
 	  STMicroelectronics STM32 MCUs.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 1278d376da50..2d6288bc4554 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-obj-$(CONFIG_SERIAL_PXA) += pxa.o
+obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
@@ -62,13 +62,11 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
 obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
 obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o
 obj-$(CONFIG_SERIAL_TILEGX) += tilegx.o
-obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
@@ -96,3 +94,6 @@ obj-$(CONFIG_SERIAL_MPS2_UART)	+= mps2-uart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
+
+obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
+obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e2c33b9528d8..d4171d71a258 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2315,12 +2315,67 @@ static int __init pl011_console_setup(struct console *co, char *options)
 	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
 }
 
+/**
+ *	pl011_console_match - non-standard console matching
+ *	@co:	  registering console
+ *	@name:	  name from console command line
+ *	@idx:	  index from console command line
+ *	@options: ptr to option string from console command line
+ *
+ *	Only attempts to match console command lines of the form:
+ *	    console=pl011,mmio|mmio32,<addr>[,<options>]
+ *	    console=pl011,0x<addr>[,<options>]
+ *	This form is used to register an initial earlycon boot console and
+ *	replace it with the amba_console at pl011 driver init.
+ *
+ *	Performs console setup for a match (as required by interface)
+ *	If no <options> are specified, then assume the h/w is already setup.
+ *
+ *	Returns 0 if console matches; otherwise non-zero to use default matching
+ */
+static int __init pl011_console_match(struct console *co, char *name, int idx,
+				      char *options)
+{
+	unsigned char iotype;
+	resource_size_t addr;
+	int i;
+
+	if (strcmp(name, "pl011") != 0)
+		return -ENODEV;
+
+	if (uart_parse_earlycon(options, &iotype, &addr, &options))
+		return -ENODEV;
+
+	if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
+		return -ENODEV;
+
+	/* try to match the port specified on the command line */
+	for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+		struct uart_port *port;
+
+		if (!amba_ports[i])
+			continue;
+
+		port = &amba_ports[i]->port;
+
+		if (port->mapbase != addr)
+			continue;
+
+		co->index = i;
+		port->cons = co;
+		return pl011_console_setup(co, options);
+	}
+
+	return -ENODEV;
+}
+
 static struct uart_driver amba_reg;
 static struct console amba_console = {
 	.name		= "ttyAMA",
 	.write		= pl011_console_write,
 	.device		= uart_console_device,
 	.setup		= pl011_console_setup,
+	.match		= pl011_console_match,
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &amba_reg,
@@ -2357,6 +2412,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 	return 0;
 }
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
+OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
 
 #else
 #define AMBA_CONSOLE	NULL
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 6450a38cb1aa..e92c23470e51 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3213,8 +3213,6 @@ get_serial_info(struct e100_serial * info,
 	 * should set them to something else than 0.
 	 */
 
-	if (!retinfo)
-		return -EFAULT;
 	memset(&tmp, 0, sizeof(tmp));
 	tmp.type = info->type;
 	tmp.line = info->line;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 76103f2c4a80..a1c6519837a4 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -430,6 +430,65 @@ static void lpuart_flush_buffer(struct uart_port *port)
 	}
 }
 
+#if defined(CONFIG_CONSOLE_POLL)
+
+static int lpuart_poll_init(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port,
+					struct lpuart_port, port);
+	unsigned long flags;
+	unsigned char temp;
+
+	sport->port.fifosize = 0;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+	/* Disable Rx & Tx */
+	writeb(0, sport->port.membase + UARTCR2);
+
+	temp = readb(sport->port.membase + UARTPFIFO);
+	/* Enable Rx and Tx FIFO */
+	writeb(temp | UARTPFIFO_RXFE | UARTPFIFO_TXFE,
+			sport->port.membase + UARTPFIFO);
+
+	/* flush Tx and Rx FIFO */
+	writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
+			sport->port.membase + UARTCFIFO);
+
+	/* explicitly clear RDRF */
+	if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
+		readb(sport->port.membase + UARTDR);
+		writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+	}
+
+	writeb(0, sport->port.membase + UARTTWFIFO);
+	writeb(1, sport->port.membase + UARTRWFIFO);
+
+	/* Enable Rx and Tx */
+	writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+
+	return 0;
+}
+
+static void lpuart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	/* drain */
+	while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE))
+		barrier();
+
+	writeb(c, port->membase + UARTDR);
+}
+
+static int lpuart_poll_get_char(struct uart_port *port)
+{
+	if (!(readb(port->membase + UARTSR1) & UARTSR1_RDRF))
+		return NO_POLL_CHAR;
+
+	return readb(port->membase + UARTDR);
+}
+
+#endif
+
 static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
 {
 	struct circ_buf *xmit = &sport->port.state->xmit;
@@ -1595,6 +1654,11 @@ static const struct uart_ops lpuart_pops = {
 	.config_port	= lpuart_config_port,
 	.verify_port	= lpuart_verify_port,
 	.flush_buffer	= lpuart_flush_buffer,
+#if defined(CONFIG_CONSOLE_POLL)
+	.poll_init	= lpuart_poll_init,
+	.poll_get_char	= lpuart_poll_get_char,
+	.poll_put_char	= lpuart_poll_put_char,
+#endif
 };
 
 static const struct uart_ops lpuart32_pops = {
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index d386346248de..157883653256 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1042,6 +1042,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	ret = spi_setup(spi);
 	if (ret) {
 		dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+		kfree(ifx_dev);
 		return -ENODEV;
 	}
 
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index e5c42fef69d2..3be051abb2a2 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1082,7 +1082,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
 		if (!port) {
 			printk(KERN_WARNING
 				"IOC4 serial memory not available for port\n");
-			return -ENOMEM;
+			goto free;
 		}
 		spin_lock_init(&port->ip_lock);
 
@@ -1190,6 +1190,11 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
 				handle_dma_error_intr, port);
 	}
 	return 0;
+
+free:
+	while (port_number)
+		kfree(ports[--port_number]);
+	return -ENOMEM;
 }
 
 /**
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 770454e0dfa3..8c1c9112b3fd 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1016,7 +1016,7 @@ static void mxs_auart_settermios(struct uart_port *u,
 			ctrl |= AUART_LINECTRL_EPS;
 	}
 
-	u->read_status_mask = 0;
+	u->read_status_mask = AUART_STAT_OERR;
 
 	if (termios->c_iflag & INPCK)
 		u->read_status_mask |= AUART_STAT_PERR;
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index cd9d9e878475..75952811c0da 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -925,6 +925,8 @@ static struct platform_driver serial_pxa_driver = {
 	},
 };
 
+
+/* 8250 driver for PXA serial ports should be used */
 static int __init serial_pxa_init(void)
 {
 	int ret;
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index fb0672554123..793395451982 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1264,7 +1264,7 @@ static int sc16is7xx_probe(struct device *dev,
 
 	/* Setup interrupt */
 	ret = devm_request_irq(dev, irq, sc16is7xx_irq,
-			       IRQF_ONESHOT | flags, dev_name(dev), s);
+			       flags, dev_name(dev), s);
 	if (!ret)
 		return 0;
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f2303f390345..d0847375ea64 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -73,7 +73,7 @@ static inline struct uart_port *uart_port_ref(struct uart_state *state)
 
 static inline void uart_port_deref(struct uart_port *uport)
 {
-	if (uport && atomic_dec_and_test(&uport->state->refcount))
+	if (atomic_dec_and_test(&uport->state->refcount))
 		wake_up(&uport->state->remove_wait);
 }
 
@@ -88,9 +88,10 @@ static inline void uart_port_deref(struct uart_port *uport)
 #define uart_port_unlock(uport, flags)					\
 	({								\
 		struct uart_port *__uport = uport;			\
-		if (__uport)						\
+		if (__uport) {						\
 			spin_unlock_irqrestore(&__uport->lock, flags);	\
-		uart_port_deref(__uport);				\
+			uart_port_deref(__uport);			\
+		}							\
 	})
 
 static inline struct uart_port *uart_port_check(struct uart_state *state)
@@ -1515,7 +1516,10 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 	unsigned long char_time, expire;
 
 	port = uart_port_ref(state);
-	if (!port || port->type == PORT_UNKNOWN || port->fifosize == 0) {
+	if (!port)
+		return;
+
+	if (port->type == PORT_UNKNOWN || port->fifosize == 0) {
 		uart_port_deref(port);
 		return;
 	}
@@ -2365,9 +2369,10 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
 
 	if (state) {
 		port = uart_port_ref(state);
-		if (port)
+		if (port) {
 			ret = port->ops->poll_get_char(port);
-		uart_port_deref(port);
+			uart_port_deref(port);
+		}
 	}
 	return ret;
 }
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 4b26252c2885..91e7dddbf72c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1142,11 +1142,8 @@ static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
 	int copied;
 
 	copied = tty_insert_flip_string(tport, buf, count);
-	if (copied < count) {
-		dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
-			 count - copied);
+	if (copied < count)
 		port->icount.buf_overrun++;
-	}
 
 	port->icount.rx += copied;
 
@@ -1161,8 +1158,6 @@ static int sci_dma_rx_find_active(struct sci_port *s)
 		if (s->active_rx == s->cookie_rx[i])
 			return i;
 
-	dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
-		s->active_rx);
 	return -1;
 }
 
@@ -1223,9 +1218,9 @@ static void sci_dma_rx_complete(void *arg)
 
 	dma_async_issue_pending(chan);
 
+	spin_unlock_irqrestore(&port->lock, flags);
 	dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
 		__func__, s->cookie_rx[active], active, s->active_rx);
-	spin_unlock_irqrestore(&port->lock, flags);
 	return;
 
 fail:
@@ -1273,8 +1268,6 @@ static void sci_submit_rx(struct sci_port *s)
 		if (dma_submit_error(s->cookie_rx[i]))
 			goto fail;
 
-		dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
-			s->cookie_rx[i], i);
 	}
 
 	s->active_rx = s->cookie_rx[0];
@@ -1288,7 +1281,6 @@ fail:
 	for (i = 0; i < 2; i++)
 		s->cookie_rx[i] = -EINVAL;
 	s->active_rx = -EINVAL;
-	dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
 	sci_rx_dma_release(s, true);
 }
 
@@ -1358,10 +1350,10 @@ static void rx_timer_fn(unsigned long arg)
 	int active, count;
 	u16 scr;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	dev_dbg(port->dev, "DMA Rx timed out\n");
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	active = sci_dma_rx_find_active(s);
 	if (active < 0) {
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -1370,9 +1362,9 @@ static void rx_timer_fn(unsigned long arg)
 
 	status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
 	if (status == DMA_COMPLETE) {
+		spin_unlock_irqrestore(&port->lock, flags);
 		dev_dbg(port->dev, "Cookie %d #%d has already completed\n",
 			s->active_rx, active);
-		spin_unlock_irqrestore(&port->lock, flags);
 
 		/* Let packet complete handler take care of the packet */
 		return;
@@ -1396,8 +1388,6 @@ static void rx_timer_fn(unsigned long arg)
 	/* Handle incomplete DMA receive */
 	dmaengine_terminate_all(s->chan_rx);
 	read = sg_dma_len(&s->sg_rx[active]) - state.residue;
-	dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
-		s->active_rx);
 
 	if (read) {
 		count = sci_dma_rx_push(s, s->rx_buf[active], read);
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 4e603d060e80..99ef5c6e4766 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -598,7 +598,8 @@ static int hv_remove(struct platform_device *dev)
 	uart_remove_one_port(&sunhv_reg, port);
 
 	sunserial_unregister_minors(&sunhv_reg, 1);
-
+	kfree(con_read_page);
+	kfree(con_write_page);
 	kfree(port);
 	sunhv_port = NULL;
 
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 9ad98eaa35bf..72df2e1b88af 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1500,6 +1500,7 @@ static int su_probe(struct platform_device *op)
 
 out_unmap:
 	of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+	kfree(up);
 	return err;
 }
 
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 9d7ab7b66a8a..71e81406ef71 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -9,6 +9,17 @@
  * Support for multiple unimaps by Jakub Jelinek <jj@ultra.linux.cz>, July 1998
  *
  * Fix bug in inverse translation. Stanislav Voronyi <stas@cnti.uanet.kharkov.ua>, Dec 1998
+ *
+ * In order to prevent the following circular lock dependency:
+ *   &mm->mmap_sem --> cpu_hotplug.lock --> console_lock --> &mm->mmap_sem
+ *
+ * We cannot allow page fault to happen while holding the console_lock.
+ * Therefore, all the userspace copy operations have to be done outside
+ * the console_lock critical sections.
+ *
+ * As all the affected functions are all called directly from vt_ioctl(), we
+ * can allocate some small buffers directly on stack without worrying about
+ * stack overflow.
  */
 
 #include <linux/module.h>
@@ -22,6 +33,7 @@
 #include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/vt_kern.h>
+#include <linux/string.h>
 
 static unsigned short translations[][256] = {
   /* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
@@ -309,18 +321,19 @@ static void update_user_maps(void)
 int con_set_trans_old(unsigned char __user * arg)
 {
 	int i;
-	unsigned short *p = translations[USER_MAP];
+	unsigned short inbuf[E_TABSZ];
 
 	if (!access_ok(VERIFY_READ, arg, E_TABSZ))
 		return -EFAULT;
 
-	console_lock();
-	for (i=0; i<E_TABSZ ; i++) {
+	for (i = 0; i < E_TABSZ ; i++) {
 		unsigned char uc;
 		__get_user(uc, arg+i);
-		p[i] = UNI_DIRECT_BASE | uc;
+		inbuf[i] = UNI_DIRECT_BASE | uc;
 	}
 
+	console_lock();
+	memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
 	update_user_maps();
 	console_unlock();
 	return 0;
@@ -330,35 +343,37 @@ int con_get_trans_old(unsigned char __user * arg)
 {
 	int i, ch;
 	unsigned short *p = translations[USER_MAP];
+	unsigned char outbuf[E_TABSZ];
 
 	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
 		return -EFAULT;
 
 	console_lock();
-	for (i=0; i<E_TABSZ ; i++)
+	for (i = 0; i < E_TABSZ ; i++)
 	{
 		ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
-		__put_user((ch & ~0xff) ? 0 : ch, arg+i);
+		outbuf[i] = (ch & ~0xff) ? 0 : ch;
 	}
 	console_unlock();
+
+	for (i = 0; i < E_TABSZ ; i++)
+		__put_user(outbuf[i], arg+i);
 	return 0;
 }
 
 int con_set_trans_new(ushort __user * arg)
 {
 	int i;
-	unsigned short *p = translations[USER_MAP];
+	unsigned short inbuf[E_TABSZ];
 
 	if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
 		return -EFAULT;
 
-	console_lock();
-	for (i=0; i<E_TABSZ ; i++) {
-		unsigned short us;
-		__get_user(us, arg+i);
-		p[i] = us;
-	}
+	for (i = 0; i < E_TABSZ ; i++)
+		__get_user(inbuf[i], arg+i);
 
+	console_lock();
+	memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
 	update_user_maps();
 	console_unlock();
 	return 0;
@@ -367,16 +382,17 @@ int con_set_trans_new(ushort __user * arg)
 int con_get_trans_new(ushort __user * arg)
 {
 	int i;
-	unsigned short *p = translations[USER_MAP];
+	unsigned short outbuf[E_TABSZ];
 
 	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
 		return -EFAULT;
 
 	console_lock();
-	for (i=0; i<E_TABSZ ; i++)
-	  __put_user(p[i], arg+i);
+	memcpy(outbuf, translations[USER_MAP], sizeof(outbuf));
 	console_unlock();
-	
+
+	for (i = 0; i < E_TABSZ ; i++)
+		__put_user(outbuf[i], arg+i);
 	return 0;
 }
 
@@ -536,10 +552,20 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 {
 	int err = 0, err1, i;
 	struct uni_pagedir *p, *q;
+	struct unipair *unilist, *plist;
 
 	if (!ct)
 		return 0;
 
+	unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
+	if (!unilist)
+		return -ENOMEM;
+
+	for (i = ct, plist = unilist; i; i--, plist++, list++) {
+		__get_user(plist->unicode, &list->unicode);
+		__get_user(plist->fontpos, &list->fontpos);
+	}
+
 	console_lock();
 
 	/* Save original vc_unipagdir_loc in case we allocate a new one */
@@ -557,8 +583,8 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 		
 		err1 = con_do_clear_unimap(vc);
 		if (err1) {
-			console_unlock();
-			return err1;
+			err = err1;
+			goto out_unlock;
 		}
 		
 		/*
@@ -592,8 +618,8 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 						*vc->vc_uni_pagedir_loc = p;
 						con_release_unimap(q);
 						kfree(q);
-						console_unlock();
-						return err1; 
+						err = err1;
+						goto out_unlock;
 					}
 				}
 			} else {
@@ -617,22 +643,17 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 	/*
 	 * Insert user specified unicode pairs into new table.
 	 */
-	while (ct--) {
-		unsigned short unicode, fontpos;
-		__get_user(unicode, &list->unicode);
-		__get_user(fontpos, &list->fontpos);
-		if ((err1 = con_insert_unipair(p, unicode,fontpos)) != 0)
+	for (plist = unilist; ct; ct--, plist++) {
+		err1 = con_insert_unipair(p, plist->unicode, plist->fontpos);
+		if (err1)
 			err = err1;
-		list++;
 	}
 	
 	/*
 	 * Merge with fontmaps of any other virtual consoles.
 	 */
-	if (con_unify_unimap(vc, p)) {
-		console_unlock();
-		return err;
-	}
+	if (con_unify_unimap(vc, p))
+		goto out_unlock;
 
 	for (i = 0; i <= 3; i++)
 		set_inverse_transl(vc, p, i); /* Update inverse translations */
@@ -640,6 +661,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 
 out_unlock:
 	console_unlock();
+	kfree(unilist);
 	return err;
 }
 
@@ -735,9 +757,15 @@ EXPORT_SYMBOL(con_copy_unimap);
  */
 int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
 {
-	int i, j, k, ect;
+	int i, j, k;
+	ushort ect;
 	u16 **p1, *p2;
 	struct uni_pagedir *p;
+	struct unipair *unilist, *plist;
+
+	unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
+	if (!unilist)
+		return -ENOMEM;
 
 	console_lock();
 
@@ -750,21 +778,26 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 			for (j = 0; j < 32; j++) {
 			p2 = *(p1++);
 			if (p2)
-				for (k = 0; k < 64; k++) {
-					if (*p2 < MAX_GLYPH && ect++ < ct) {
-						__put_user((u_short)((i<<11)+(j<<6)+k),
-							   &list->unicode);
-						__put_user((u_short) *p2, 
-							   &list->fontpos);
-						list++;
+				for (k = 0; k < 64; k++, p2++) {
+					if (*p2 >= MAX_GLYPH)
+						continue;
+					if (ect < ct) {
+						unilist[ect].unicode =
+							(i<<11)+(j<<6)+k;
+						unilist[ect].fontpos = *p2;
 					}
-					p2++;
+					ect++;
 				}
 			}
 		}
 	}
-	__put_user(ect, uct);
 	console_unlock();
+	for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) {
+		__put_user(plist->unicode, &list->unicode);
+		__put_user(plist->fontpos, &list->fontpos);
+	}
+	__put_user(ect, uct);
+	kfree(unilist);
 	return ((ect <= ct) ? 0 : -ENOMEM);
 }
 
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 0f8caae4267d..3dd6a491cdba 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -982,7 +982,7 @@ static void kbd_led_trigger_activate(struct led_classdev *cdev)
 	KBD_LED_TRIGGER((_led_bit) + 8, _name)
 
 static struct kbd_led_trigger kbd_led_triggers[] = {
-	KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrollock"),
+	KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrolllock"),
 	KBD_LED_TRIGGER(VC_NUMLOCK,   "kbd-numlock"),
 	KBD_LED_TRIGGER(VC_CAPSLOCK,  "kbd-capslock"),
 	KBD_LED_TRIGGER(VC_KANALOCK,  "kbd-kanalock"),
@@ -1256,7 +1256,7 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 	case KEY_SYSRQ:
 		/*
 		 * Real AT keyboards (that's what we're trying
-		 * to emulate here emit 0xe0 0x2a 0xe0 0x37 when
+		 * to emulate here) emit 0xe0 0x2a 0xe0 0x37 when
 		 * pressing PrtSc/SysRq alone, but simply 0x54
 		 * when pressing Alt+PrtSc/SysRq.
 		 */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 8c3bf3d613c0..623264445100 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -315,38 +315,27 @@ void schedule_console_callback(void)
 	schedule_work(&console_work);
 }
 
-static void scrup(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
+static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int nr)
 {
-	unsigned short *d, *s;
+	u16 *clear, *d, *s;
 
-	if (t+nr >= b)
+	if (t + nr >= b)
 		nr = b - t - 1;
 	if (b > vc->vc_rows || t >= b || nr < 1)
 		return;
-	if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, SM_UP, nr))
+	if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr))
 		return;
-	d = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
-	s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * (t + nr));
-	scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
-	scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_video_erase_char,
-		    vc->vc_size_row * nr);
-}
 
-static void scrdown(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
-{
-	unsigned short *s;
-	unsigned int step;
+	s = clear = (u16 *)(vc->vc_origin + vc->vc_size_row * t);
+	d = (u16 *)(vc->vc_origin + vc->vc_size_row * (t + nr));
 
-	if (t+nr >= b)
-		nr = b - t - 1;
-	if (b > vc->vc_rows || t >= b || nr < 1)
-		return;
-	if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, SM_DOWN, nr))
-		return;
-	s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
-	step = vc->vc_cols * nr;
-	scr_memmovew(s + step, s, (b - t - nr) * vc->vc_size_row);
-	scr_memsetw(s, vc->vc_video_erase_char, 2 * step);
+	if (dir == SM_UP) {
+		clear = s + (b - t - nr) * vc->vc_cols;
+		swap(s, d);
+	}
+	scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
+	scr_memsetw(clear, vc->vc_video_erase_char, vc->vc_size_row * nr);
 }
 
 static void do_update_region(struct vc_data *vc, unsigned long start, int count)
@@ -1120,7 +1109,7 @@ static void lf(struct vc_data *vc)
 	 * if below scrolling region
 	 */
     	if (vc->vc_y + 1 == vc->vc_bottom)
-		scrup(vc, vc->vc_top, vc->vc_bottom, 1);
+		con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_UP, 1);
 	else if (vc->vc_y < vc->vc_rows - 1) {
 	    	vc->vc_y++;
 		vc->vc_pos += vc->vc_size_row;
@@ -1135,7 +1124,7 @@ static void ri(struct vc_data *vc)
 	 * if above scrolling region
 	 */
 	if (vc->vc_y == vc->vc_top)
-		scrdown(vc, vc->vc_top, vc->vc_bottom, 1);
+		con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_DOWN, 1);
 	else if (vc->vc_y > 0) {
 		vc->vc_y--;
 		vc->vc_pos -= vc->vc_size_row;
@@ -1631,7 +1620,7 @@ static void csi_L(struct vc_data *vc, unsigned int nr)
 		nr = vc->vc_rows - vc->vc_y;
 	else if (!nr)
 		nr = 1;
-	scrdown(vc, vc->vc_y, vc->vc_bottom, nr);
+	con_scroll(vc, vc->vc_y, vc->vc_bottom, SM_DOWN, nr);
 	vc->vc_need_wrap = 0;
 }
 
@@ -1652,7 +1641,7 @@ static void csi_M(struct vc_data *vc, unsigned int nr)
 		nr = vc->vc_rows - vc->vc_y;
 	else if (!nr)
 		nr=1;
-	scrup(vc, vc->vc_y, vc->vc_bottom, nr);
+	con_scroll(vc, vc->vc_y, vc->vc_bottom, SM_UP, nr);
 	vc->vc_need_wrap = 0;
 }
 
@@ -4295,6 +4284,46 @@ void vcs_scr_updated(struct vc_data *vc)
 	notify_update(vc);
 }
 
+void vc_scrolldelta_helper(struct vc_data *c, int lines,
+		unsigned int rolled_over, void *base, unsigned int size)
+{
+	unsigned long ubase = (unsigned long)base;
+	ptrdiff_t scr_end = (void *)c->vc_scr_end - base;
+	ptrdiff_t vorigin = (void *)c->vc_visible_origin - base;
+	ptrdiff_t origin = (void *)c->vc_origin - base;
+	int margin = c->vc_size_row * 4;
+	int from, wrap, from_off, avail;
+
+	/* Turn scrollback off */
+	if (!lines) {
+		c->vc_visible_origin = c->vc_origin;
+		return;
+	}
+
+	/* Do we have already enough to allow jumping from 0 to the end? */
+	if (rolled_over > scr_end + margin) {
+		from = scr_end;
+		wrap = rolled_over + c->vc_size_row;
+	} else {
+		from = 0;
+		wrap = size;
+	}
+
+	from_off = (vorigin - from + wrap) % wrap + lines * c->vc_size_row;
+	avail = (origin - from + wrap) % wrap;
+
+	/* Only a little piece would be left? Show all incl. the piece! */
+	if (avail < 2 * margin)
+		margin = 0;
+	if (from_off < margin)
+		from_off = 0;
+	if (from_off > avail - margin)
+		from_off = avail;
+
+	c->vc_visible_origin = ubase + (from + from_off) % wrap;
+}
+EXPORT_SYMBOL_GPL(vc_scrolldelta_helper);
+
 /*
  *	Visible symbols for modules
  */
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 460cebf322e3..4b5777ec1501 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -686,8 +686,6 @@ static void
 sisusbcon_scrolldelta(struct vc_data *c, int lines)
 {
 	struct sisusb_usb_data *sisusb;
-	int margin = c->vc_size_row * 4;
-	int ul, we, p, st;
 
 	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
 	if (!sisusb)
@@ -700,39 +698,8 @@ sisusbcon_scrolldelta(struct vc_data *c, int lines)
 		return;
 	}
 
-	if (!lines)		/* Turn scrollback off */
-		c->vc_visible_origin = c->vc_origin;
-	else {
-
-		if (sisusb->con_rolled_over >
-				(c->vc_scr_end - sisusb->scrbuf) + margin) {
-
-			ul = c->vc_scr_end - sisusb->scrbuf;
-			we = sisusb->con_rolled_over + c->vc_size_row;
-
-		} else {
-
-			ul = 0;
-			we = sisusb->scrbuf_size;
-
-		}
-
-		p = (c->vc_visible_origin - sisusb->scrbuf - ul + we) % we +
-				lines * c->vc_size_row;
-
-		st = (c->vc_origin - sisusb->scrbuf - ul + we) % we;
-
-		if (st < 2 * margin)
-			margin = 0;
-
-		if (p < margin)
-			p = 0;
-
-		if (p > st - margin)
-			p = st;
-
-		c->vc_visible_origin = sisusb->scrbuf + (p + ul) % we;
-	}
+	vc_scrolldelta_helper(c, lines, sisusb->con_rolled_over,
+			(void *)sisusb->scrbuf, sisusb->scrbuf_size);
 
 	sisusbcon_set_start_address(sisusb, c);
 
@@ -808,9 +775,10 @@ sisusbcon_cursor(struct vc_data *c, int mode)
 	mutex_unlock(&sisusb->lock);
 }
 
-static int
+static bool
 sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
-					int t, int b, int dir, int lines)
+		unsigned int t, unsigned int b, enum con_scroll dir,
+		unsigned int lines)
 {
 	int cols = sisusb->sisusb_num_columns;
 	int length = ((b - t) * cols) * 2;
@@ -852,8 +820,9 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
 }
 
 /* Interface routine */
-static int
-sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+static bool
+sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int lines)
 {
 	struct sisusb_usb_data *sisusb;
 	u16 eattr = c->vc_video_erase_char;
@@ -870,17 +839,17 @@ sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
 	 */
 
 	if (!lines)
-		return 1;
+		return true;
 
 	sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
 	if (!sisusb)
-		return 0;
+		return false;
 
 	/* sisusb->lock is down */
 
 	if (sisusb_is_inactive(c, sisusb)) {
 		mutex_unlock(&sisusb->lock);
-		return 0;
+		return false;
 	}
 
 	/* Special case */
@@ -971,7 +940,7 @@ sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
 
 	mutex_unlock(&sisusb->lock);
 
-	return 1;
+	return true;
 }
 
 /* Interface routine */
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b87f5cfdaea5..a44f5627b82a 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -164,8 +164,6 @@ static void fbcon_putcs(struct vc_data *vc, const unsigned short *s,
 			int count, int ypos, int xpos);
 static void fbcon_clear_margins(struct vc_data *vc, int bottom_only);
 static void fbcon_cursor(struct vc_data *vc, int mode);
-static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
-			int count);
 static void fbcon_bmove(struct vc_data *vc, int sy, int sx, int dy, int dx,
 			int height, int width);
 static int fbcon_switch(struct vc_data *vc);
@@ -1795,15 +1793,15 @@ static inline void fbcon_softback_note(struct vc_data *vc, int t,
 	softback_curr = softback_in;
 }
 
-static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
-			int count)
+static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int count)
 {
 	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
 	struct display *p = &fb_display[vc->vc_num];
 	int scroll_partial = info->flags & FBINFO_PARTIAL_PAN_OK;
 
 	if (fbcon_is_inactive(vc, info))
-		return -EINVAL;
+		return true;
 
 	fbcon_cursor(vc, CM_ERASE);
 
@@ -1831,7 +1829,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 							(b - count)),
 				    vc->vc_video_erase_char,
 				    vc->vc_size_row * count);
-			return 1;
+			return true;
 			break;
 
 		case SCROLL_WRAP_MOVE:
@@ -1903,7 +1901,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 							(b - count)),
 				    vc->vc_video_erase_char,
 				    vc->vc_size_row * count);
-			return 1;
+			return true;
 		}
 		break;
 
@@ -1922,7 +1920,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 							t),
 				    vc->vc_video_erase_char,
 				    vc->vc_size_row * count);
-			return 1;
+			return true;
 			break;
 
 		case SCROLL_WRAP_MOVE:
@@ -1992,10 +1990,10 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 							t),
 				    vc->vc_video_erase_char,
 				    vc->vc_size_row * count);
-			return 1;
+			return true;
 		}
 	}
-	return 0;
+	return false;
 }
 
 
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index bacbb044d77c..ec192a1bf297 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -488,12 +488,13 @@ static void mdacon_cursor(struct vc_data *c, int mode)
 	}
 }
 
-static int mdacon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+static bool mdacon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int lines)
 {
 	u16 eattr = mda_convert_attr(c->vc_video_erase_char);
 
 	if (!lines)
-		return 0;
+		return false;
 
 	if (lines > c->vc_rows)   /* maximum realistic size */
 		lines = c->vc_rows;
@@ -514,7 +515,7 @@ static int mdacon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
 		break;
 	}
 
-	return 0;
+	return false;
 }
 
 
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e3b9521e4ec3..1e11614322fe 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -574,8 +574,8 @@ static int newport_font_set(struct vc_data *vc, struct console_font *font, unsig
 	return newport_set_font(vc->vc_num, font);
 }
 
-static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
-			  int lines)
+static bool newport_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int lines)
 {
 	int count, x, y;
 	unsigned short *s, *d;
@@ -595,7 +595,7 @@ static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
 					    (vc->vc_color & 0xf0) >> 4);
 		}
 		npregs->cset.topscan = (topscan - 1) & 0x3ff;
-		return 0;
+		return false;
 	}
 
 	count = (b - t - lines) * vc->vc_cols;
@@ -670,7 +670,7 @@ static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
 			}
 		}
 	}
-	return 1;
+	return true;
 }
 
 static int newport_dummy(struct vc_data *c)
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 3a10ac19598f..79c9bd8d3025 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -153,12 +153,13 @@ static void sticon_cursor(struct vc_data *conp, int mode)
     }
 }
 
-static int sticon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
+static bool sticon_scroll(struct vc_data *conp, unsigned int t,
+		unsigned int b, enum con_scroll dir, unsigned int count)
 {
     struct sti_struct *sti = sticon_sti;
 
     if (vga_is_gfx)
-        return 0;
+        return false;
 
     sticon_cursor(conp, CM_ERASE);
 
@@ -174,7 +175,7 @@ static int sticon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
 	break;
     }
 
-    return 0;
+    return false;
 }
 
 static void sticon_init(struct vc_data *c, int init)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 11576611a974..c22a56232b7c 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -60,15 +60,6 @@ static struct vgastate vgastate;
 
 #define BLANK 0x0020
 
-#define CAN_LOAD_EGA_FONTS	/* undefine if the user must not do this */
-#define CAN_LOAD_PALETTE	/* undefine if the user must not do this */
-
-/* You really do _NOT_ want to define this, unless you have buggy
- * Trident VGA which will resize cursor when moving it between column
- * 15 & 16. If you define this and your VGA is OK, inverse bug will
- * appear.
- */
-#undef TRIDENT_GLITCH
 #define VGA_FONTWIDTH       8   /* VGA does not support fontwidths != 8 */
 /*
  *  Interface used by the world
@@ -83,14 +74,12 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch);
 static void vgacon_scrolldelta(struct vc_data *c, int lines);
 static int vgacon_set_origin(struct vc_data *c);
 static void vgacon_save_screen(struct vc_data *c);
-static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
-			 int lines);
 static void vgacon_invert_region(struct vc_data *c, u16 * p, int count);
 static struct uni_pagedir *vgacon_uni_pagedir;
 static int vgacon_refcount;
 
 /* Description of the hardware situation */
-static int		vga_init_done		__read_mostly;
+static bool		vga_init_done;
 static unsigned long	vga_vram_base		__read_mostly;	/* Base of video memory */
 static unsigned long	vga_vram_end		__read_mostly;	/* End of video memory */
 static unsigned int	vga_vram_size		__read_mostly;	/* Size of video memory */
@@ -98,31 +87,31 @@ static u16		vga_video_port_reg	__read_mostly;	/* Video register select port */
 static u16		vga_video_port_val	__read_mostly;	/* Video register value port */
 static unsigned int	vga_video_num_columns;			/* Number of text columns */
 static unsigned int	vga_video_num_lines;			/* Number of text lines */
-static int		vga_can_do_color	__read_mostly;	/* Do we support colors? */
+static bool		vga_can_do_color;			/* Do we support colors? */
 static unsigned int	vga_default_font_height __read_mostly;	/* Height of default screen font */
 static unsigned char	vga_video_type		__read_mostly;	/* Card type */
-static unsigned char	vga_hardscroll_enabled	__read_mostly;
-static unsigned char	vga_hardscroll_user_enable __read_mostly = 1;
-static unsigned char	vga_font_is_default = 1;
+static bool		vga_font_is_default = true;
 static int		vga_vesa_blanked;
-static int 		vga_palette_blanked;
-static int 		vga_is_gfx;
-static int 		vga_512_chars;
+static bool 		vga_palette_blanked;
+static bool 		vga_is_gfx;
+static bool 		vga_512_chars;
 static int 		vga_video_font_height;
 static int 		vga_scan_lines		__read_mostly;
 static unsigned int 	vga_rolled_over;
 
-static int vgacon_text_mode_force;
+static bool vgacon_text_mode_force;
+static bool vga_hardscroll_enabled;
+static bool vga_hardscroll_user_enable = true;
 
 bool vgacon_text_force(void)
 {
-	return vgacon_text_mode_force ? true : false;
+	return vgacon_text_mode_force;
 }
 EXPORT_SYMBOL(vgacon_text_force);
 
 static int __init text_mode(char *str)
 {
-	vgacon_text_mode_force = 1;
+	vgacon_text_mode_force = true;
 	return 1;
 }
 
@@ -136,7 +125,7 @@ static int __init no_scroll(char *str)
 	 * Braille reader made by F.H. Papenmeier (Germany).
 	 * Use the "no-scroll" bootflag.
 	 */
-	vga_hardscroll_user_enable = vga_hardscroll_enabled = 0;
+	vga_hardscroll_user_enable = vga_hardscroll_enabled = false;
 	return 1;
 }
 
@@ -159,18 +148,10 @@ static inline void write_vga(unsigned char reg, unsigned int val)
 	 * handlers, thus the write has to be IRQ-atomic.
 	 */
 	raw_spin_lock_irqsave(&vga_lock, flags);
-
-#ifndef SLOW_VGA
 	v1 = reg + (val & 0xff00);
 	v2 = reg + 1 + ((val << 8) & 0xff00);
 	outw(v1, vga_video_port_reg);
 	outw(v2, vga_video_port_reg);
-#else
-	outb_p(reg, vga_video_port_reg);
-	outb_p(val >> 8, vga_video_port_val);
-	outb_p(reg + 1, vga_video_port_reg);
-	outb_p(val & 0xff, vga_video_port_val);
-#endif
 	raw_spin_unlock_irqrestore(&vga_lock, flags);
 }
 
@@ -334,31 +315,8 @@ static void vgacon_restore_screen(struct vc_data *c)
 
 static void vgacon_scrolldelta(struct vc_data *c, int lines)
 {
-	if (!lines)		/* Turn scrollback off */
-		c->vc_visible_origin = c->vc_origin;
-	else {
-		int margin = c->vc_size_row * 4;
-		int ul, we, p, st;
-
-		if (vga_rolled_over >
-		    (c->vc_scr_end - vga_vram_base) + margin) {
-			ul = c->vc_scr_end - vga_vram_base;
-			we = vga_rolled_over + c->vc_size_row;
-		} else {
-			ul = 0;
-			we = vga_vram_size;
-		}
-		p = (c->vc_visible_origin - vga_vram_base - ul + we) % we +
-		    lines * c->vc_size_row;
-		st = (c->vc_origin - vga_vram_base - ul + we) % we;
-		if (st < 2 * margin)
-			margin = 0;
-		if (p < margin)
-			p = 0;
-		if (p > st - margin)
-			p = st;
-		c->vc_visible_origin = vga_vram_base + (p + ul) % we;
-	}
+	vc_scrolldelta_helper(c, lines, vga_rolled_over, (void *)vga_vram_base,
+			vga_vram_size);
 	vga_set_mem_top(c);
 }
 #endif /* CONFIG_VGACON_SOFT_SCROLLBACK */
@@ -427,7 +385,7 @@ static const char *vgacon_startup(void)
 		}
 	} else {
 		/* If not, it is color. */
-		vga_can_do_color = 1;
+		vga_can_do_color = true;
 		vga_vram_base = 0xb8000;
 		vga_video_port_reg = VGA_CRT_IC;
 		vga_video_port_val = VGA_CRT_DC;
@@ -451,18 +409,6 @@ static const char *vgacon_startup(void)
 				request_resource(&ioport_resource,
 						 &vga_console_resource);
 
-#ifdef VGA_CAN_DO_64KB
-				/*
-				 * get 64K rather than 32K of video RAM.
-				 * This doesn't actually work on all "VGA"
-				 * controllers (it seems like setting MM=01
-				 * and COE=1 isn't necessarily a good idea)
-				 */
-				vga_vram_base = 0xa0000;
-				vga_vram_size = 0x10000;
-				outb_p(6, VGA_GFX_I);
-				outb_p(6, VGA_GFX_D);
-#endif
 				/*
 				 * Normalise the palette registers, to point
 				 * the 16 screen colours to the first 16
@@ -542,7 +488,7 @@ static const char *vgacon_startup(void)
 
 	if (!vga_init_done) {
 		vgacon_scrollback_startup();
-		vga_init_done = 1;
+		vga_init_done = true;
 	}
 
 	return display_desc;
@@ -634,7 +580,7 @@ static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity,
 
 static void vgacon_invert_region(struct vc_data *c, u16 * p, int count)
 {
-	int col = vga_can_do_color;
+	const bool col = vga_can_do_color;
 
 	while (count--) {
 		u16 a = scr_readw(p);
@@ -652,11 +598,6 @@ static void vgacon_set_cursor_size(int xpos, int from, int to)
 	unsigned long flags;
 	int curs, cure;
 
-#ifdef TRIDENT_GLITCH
-	if (xpos < 16)
-		from--, to--;
-#endif
-
 	if ((from == cursor_size_lastfrom) && (to == cursor_size_lastto))
 		return;
 	cursor_size_lastfrom = from;
@@ -858,12 +799,10 @@ static void vga_set_palette(struct vc_data *vc, const unsigned char *table)
 
 static void vgacon_set_palette(struct vc_data *vc, const unsigned char *table)
 {
-#ifdef CAN_LOAD_PALETTE
 	if (vga_video_type != VIDEO_TYPE_VGAC || vga_palette_blanked
 	    || !con_is_visible(vc))
 		return;
 	vga_set_palette(vc, table);
-#endif
 }
 
 /* structure holding original VGA register settings */
@@ -1006,24 +945,24 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch)
 		}
 		if (vga_palette_blanked) {
 			vga_set_palette(c, color_table);
-			vga_palette_blanked = 0;
+			vga_palette_blanked = false;
 			return 0;
 		}
-		vga_is_gfx = 0;
+		vga_is_gfx = false;
 		/* Tell console.c that it has to restore the screen itself */
 		return 1;
 	case 1:		/* Normal blanking */
 	case -1:	/* Obsolete */
 		if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) {
 			vga_pal_blank(&vgastate);
-			vga_palette_blanked = 1;
+			vga_palette_blanked = true;
 			return 0;
 		}
 		vgacon_set_origin(c);
 		scr_memsetw((void *) vga_vram_base, BLANK,
 			    c->vc_screenbuf_size);
 		if (mode_switch)
-			vga_is_gfx = 1;
+			vga_is_gfx = true;
 		return 1;
 	default:		/* VESA blanking */
 		if (vga_video_type == VIDEO_TYPE_VGAC) {
@@ -1046,15 +985,14 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch)
  * (sizif@botik.yaroslavl.su).
  */
 
-#ifdef CAN_LOAD_EGA_FONTS
-
 #define colourmap 0xa0000
 /* Pauline Middelink <middelin@polyware.iaf.nl> reports that we
    should use 0xA0000 for the bwmap as well.. */
 #define blackwmap 0xa0000
 #define cmapsz 8192
 
-static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
+static int vgacon_do_font_op(struct vgastate *state, char *arg, int set,
+		bool ch512)
 {
 	unsigned short video_port_status = vga_video_port_reg + 6;
 	int font_select = 0x00, beg, i;
@@ -1063,10 +1001,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
 	if (vga_video_type != VIDEO_TYPE_EGAM) {
 		charmap = (char *) VGA_MAP_MEM(colourmap, 0);
 		beg = 0x0e;
-#ifdef VGA_CAN_DO_64KB
-		if (vga_video_type == VIDEO_TYPE_VGAC)
-			beg = 0x06;
-#endif
 	} else {
 		charmap = (char *) VGA_MAP_MEM(blackwmap, 0);
 		beg = 0x0a;
@@ -1080,7 +1014,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
 	if (!arg)
 		return -EINVAL;	/* Return to default font not supported */
 
-	vga_font_is_default = 0;
+	vga_font_is_default = false;
 	font_select = ch512 ? 0x04 : 0x00;
 #else
 	/*
@@ -1091,7 +1025,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
 	if (set) {
 		vga_font_is_default = !arg;
 		if (!arg)
-			ch512 = 0;	/* Default font is always 256 */
+			ch512 = false;	/* Default font is always 256 */
 		font_select = arg ? (ch512 ? 0x0e : 0x0a) : 0x00;
 	}
 
@@ -1295,13 +1229,6 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font)
 	return vgacon_do_font_op(&vgastate, font->data, 0, vga_512_chars);
 }
 
-#else
-
-#define vgacon_font_set NULL
-#define vgacon_font_get NULL
-
-#endif
-
 static int vgacon_resize(struct vc_data *c, unsigned int width,
 			 unsigned int height, unsigned int user)
 {
@@ -1350,17 +1277,17 @@ static void vgacon_save_screen(struct vc_data *c)
 			    c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size);
 }
 
-static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
-			 int lines)
+static bool vgacon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+		enum con_scroll dir, unsigned int lines)
 {
 	unsigned long oldo;
 	unsigned int delta;
 
 	if (t || b != c->vc_rows || vga_is_gfx || c->vc_mode != KD_TEXT)
-		return 0;
+		return false;
 
 	if (!vga_hardscroll_enabled || lines >= c->vc_rows / 2)
-		return 0;
+		return false;
 
 	vgacon_restore_screen(c);
 	oldo = c->vc_origin;
@@ -1396,7 +1323,7 @@ static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
 	c->vc_visible_origin = c->vc_origin;
 	vga_set_mem_top(c);
 	c->vc_pos = (c->vc_pos - oldo) + c->vc_origin;
-	return 1;
+	return true;
 }
 
 
diff --git a/include/linux/console.h b/include/linux/console.h
index d530c4627e54..9c26c6685587 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -28,9 +28,17 @@ struct tty_struct;
 #define VT100ID "\033[?1;2c"
 #define VT102ID "\033[?6c"
 
+enum con_scroll {
+	SM_UP,
+	SM_DOWN,
+};
+
 /**
  * struct consw - callbacks for consoles
  *
+ * @con_scroll: move lines from @top to @bottom in direction @dir by @lines.
+ *		Return true if no generic handling should be done.
+ *		Invoked by csi_M and printing to the console.
  * @con_set_palette: sets the palette of the console to @table (optional)
  * @con_scrolldelta: the contents of the console should be scrolled by @lines.
  *		     Invoked by user. (optional)
@@ -44,7 +52,9 @@ struct consw {
 	void	(*con_putc)(struct vc_data *, int, int, int);
 	void	(*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
 	void	(*con_cursor)(struct vc_data *, int);
-	int	(*con_scroll)(struct vc_data *, int, int, int, int);
+	bool	(*con_scroll)(struct vc_data *, unsigned int top,
+			unsigned int bottom, enum con_scroll dir,
+			unsigned int lines);
 	int	(*con_switch)(struct vc_data *);
 	int	(*con_blank)(struct vc_data *, int, int);
 	int	(*con_font_set)(struct vc_data *, struct console_font *, unsigned);
@@ -99,10 +109,6 @@ static inline int con_debug_leave(void)
 }
 #endif
 
-/* scroll */
-#define SM_UP       (1)
-#define SM_DOWN     (2)
-
 /* cursor */
 #define CM_DRAW     (1)
 #define CM_ERASE    (2)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 48ec7651989b..61fbb440449c 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -36,6 +36,8 @@ struct plat_serial8250_port {
 	void		(*set_termios)(struct uart_port *,
 			               struct ktermios *new,
 			               struct ktermios *old);
+	void		(*set_ldisc)(struct uart_port *,
+				     struct ktermios *);
 	unsigned int	(*get_mctrl)(struct uart_port *);
 	int		(*handle_irq)(struct uart_port *);
 	void		(*pm)(struct uart_port *, unsigned int state,
@@ -94,7 +96,7 @@ struct uart_8250_port {
 	struct uart_port	port;
 	struct timer_list	timer;		/* "no irq" timer */
 	struct list_head	list;		/* ports on this IRQ */
-	unsigned short		capabilities;	/* port capabilities */
+	u32			capabilities;	/* port capabilities */
 	unsigned short		bugs;		/* port bugs */
 	bool			fifo_bug;	/* min RX trigger if enabled */
 	unsigned int		tx_loadsz;	/* transmit fifo load size */
@@ -149,6 +151,8 @@ extern int early_serial8250_setup(struct earlycon_device *device,
 					 const char *options);
 extern void serial8250_do_set_termios(struct uart_port *port,
 		struct ktermios *termios, struct ktermios *old);
+extern void serial8250_do_set_ldisc(struct uart_port *port,
+				    struct ktermios *termios);
 extern unsigned int serial8250_do_get_mctrl(struct uart_port *port);
 extern int serial8250_do_startup(struct uart_port *port);
 extern void serial8250_do_shutdown(struct uart_port *port);
@@ -168,6 +172,6 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 
 extern void serial8250_set_isa_configurator(void (*v)
 					(int port, struct uart_port *up,
-						unsigned short *capabilities));
+						u32 *capabilities));
 
 #endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 344201437017..5d494888a612 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -123,6 +123,8 @@ struct uart_port {
 	void			(*set_termios)(struct uart_port *,
 				               struct ktermios *new,
 				               struct ktermios *old);
+	void			(*set_ldisc)(struct uart_port *,
+					     struct ktermios *);
 	unsigned int		(*get_mctrl)(struct uart_port *);
 	void			(*set_mctrl)(struct uart_port *, unsigned int);
 	int			(*startup)(struct uart_port *port);
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 6abd24f258bc..833fdd4794a0 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -191,5 +191,7 @@ extern void vt_set_led_state(int console, int leds);
 extern void vt_kbd_con_start(int console);
 extern void vt_kbd_con_stop(int console);
 
+void vc_scrolldelta_helper(struct vc_data *c, int lines,
+		unsigned int rolled_over, void *_base, unsigned int size);
 
 #endif /* _VT_KERN_H */
author	Linus Torvalds <torvalds@linux-foundation.org>	2016-12-13 11:18:24 -0800
committer	Linus Torvalds <torvalds@linux-foundation.org>	2016-12-13 11:18:24 -0800
commit	5266e70335dac35c35b5ca9cea4251c1389d4a68 (patch)
tree	c8bfdcc37b922a0978ea7aab4a43685ee9f33c3e
parent	Merge tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (diff)
parent	serial: 8250_mid fix calltrace when hotplug 8250 serial controller (diff)
download	linux-dev-5266e70335dac35c35b5ca9cea4251c1389d4a68.tar.xz linux-dev-5266e70335dac35c35b5ca9cea4251c1389d4a68.zip