selftests: mlxsw: Add QOS test for maximum use of descriptors

Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.

qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit c864769add96
("mlxsw: Configure descriptor buffers") pushed.

Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.

The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 296 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
index a95856aafd2a..6369927e9c37 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
@@ -61,3 +61,17 @@ mlxsw_only_on_spectrum()
 
 	return 1
 }
+
+mlxsw_max_descriptors_get()
+{
+	local spectrum_rev=$MLXSW_SPECTRUM_REV
+
+	case $spectrum_rev in
+	1) echo 81920 ;;
+	2) echo 136960 ;;
+	3) echo 204800 ;;
+	4) echo 220000 ;;
+	*) echo "Unknown max descriptors for chip revision." > /dev/stderr
+	   return 1 ;;
+	esac
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh
new file mode 100755
index 000000000000..5ac4f795e333
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh
@@ -0,0 +1,282 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test sends many small packets (size is less than cell size) through the
+# switch. A shaper is used in $swp2, so the traffic is limited there. Packets
+# are queued till they will be sent.
+#
+# The idea is to verify that the switch can handle at least 85% of maximum
+# supported descrpitors by hardware. Then, we verify that the driver configures
+# firmware to allow infinite size of egress descriptor pool, and does not use a
+# lower limitation. Increase the size of the relevant pools such that the pool's
+# size does not limit the traffic.
+
+# +-----------------------+
+# | H1                    |
+# |   + $h1.111           |
+# |   | 192.0.2.33/28     |
+# |   |                   |
+# |   + $h1               |
+# +---|-------------------+
+#     |
+# +---|-----------------------------+
+# |   + $swp1                       |
+# |   | iPOOL1                      |
+# |   |                             |
+# | +-|------------------------+    |
+# | | + $swp1.111              |    |
+# | |                          |    |
+# | | BR1                      |    |
+# | |                          |    |
+# | | + $swp2.111              |    |
+# | +-|------------------------+    |
+# |   |                             |
+# |   + $swp2                       |
+# |   | ePOOL6                      |
+# |   | 1mbit                       |
+# +---+-----------------------------+
+#     |
+# +---|-------------------+
+# |   + $h2            H2 |
+# |   |                   |
+# |   + $h2.111           |
+# |     192.0.2.34/28     |
+# +-----------------------+
+#
+
+ALL_TESTS="
+	ping_ipv4
+	max_descriptors
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+source mlxsw_lib.sh
+
+MAX_POOL_SIZE=$(devlink_pool_size_get)
+SHAPER_RATE=1mbit
+
+# The current TBF qdisc interface does not allow us to configure the shaper to
+# flat zero. The ASIC shaper is guaranteed to work with a granularity of
+# 200Mbps. On Spectrum-2, writing a value close to zero instead of zero works
+# well, but the performance on Spectrum-1 is unpredictable. Thus, do not run the
+# test on Spectrum-1.
+mlxsw_only_on_spectrum 2+ || exit
+
+h1_create()
+{
+	simple_if_init $h1
+
+	vlan_create $h1 111 v$h1 192.0.2.33/28
+	ip link set dev $h1.111 type vlan egress-qos-map 0:1
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 111
+
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+
+	vlan_create $h2 111 v$h2 192.0.2.34/28
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 111
+
+	simple_if_fini $h2
+}
+
+switch_create()
+{
+	# pools
+	# -----
+
+	devlink_pool_size_thtype_save 1
+	devlink_pool_size_thtype_save 6
+
+	devlink_port_pool_th_save $swp1 1
+	devlink_port_pool_th_save $swp2 6
+
+	devlink_tc_bind_pool_th_save $swp1 1 ingress
+	devlink_tc_bind_pool_th_save $swp2 1 egress
+
+	devlink_pool_size_thtype_set 1 dynamic $MAX_POOL_SIZE
+	devlink_pool_size_thtype_set 6 static $MAX_POOL_SIZE
+
+	# $swp1
+	# -----
+
+	ip link set dev $swp1 up
+	vlan_create $swp1 111
+	ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1
+
+	devlink_port_pool_th_set $swp1 1 16
+	devlink_tc_bind_pool_th_set $swp1 1 ingress 1 16
+
+	tc qdisc replace dev $swp1 root handle 1: \
+	   ets bands 8 strict 8 priomap 7 6
+	dcb buffer set dev $swp1 prio-buffer all:0 1:1
+
+	# $swp2
+	# -----
+
+	ip link set dev $swp2 up
+	vlan_create $swp2 111
+	ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1
+
+	devlink_port_pool_th_set $swp2 6 $MAX_POOL_SIZE
+	devlink_tc_bind_pool_th_set $swp2 1 egress 6 $MAX_POOL_SIZE
+
+	tc qdisc replace dev $swp2 root handle 1: tbf rate $SHAPER_RATE \
+		burst 128K limit 500M
+	tc qdisc replace dev $swp2 parent 1:1 handle 11: \
+		ets bands 8 strict 8 priomap 7 6
+
+	# bridge
+	# ------
+
+	ip link add name br1 type bridge vlan_filtering 0
+	ip link set dev $swp1.111 master br1
+	ip link set dev br1 up
+
+	ip link set dev $swp2.111 master br1
+}
+
+switch_destroy()
+{
+	# Do this first so that we can reset the limits to values that are only
+	# valid for the original static / dynamic setting.
+	devlink_pool_size_thtype_restore 6
+	devlink_pool_size_thtype_restore 1
+
+	# bridge
+	# ------
+
+	ip link set dev $swp2.111 nomaster
+
+	ip link set dev br1 down
+	ip link set dev $swp1.111 nomaster
+	ip link del dev br1
+
+	# $swp2
+	# -----
+
+	tc qdisc del dev $swp2 parent 1:1 handle 11:
+	tc qdisc del dev $swp2 root
+
+	devlink_tc_bind_pool_th_restore $swp2 1 egress
+	devlink_port_pool_th_restore $swp2 6
+
+	vlan_destroy $swp2 111
+	ip link set dev $swp2 down
+
+	# $swp1
+	# -----
+
+	dcb buffer set dev $swp1 prio-buffer all:0
+	tc qdisc del dev $swp1 root
+
+	devlink_tc_bind_pool_th_restore $swp1 1 ingress
+	devlink_port_pool_th_restore $swp1 1
+
+	vlan_destroy $swp1 111
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.34 " h1->h2"
+}
+
+percentage_used()
+{
+	local num_packets=$1; shift
+	local max_packets=$1; shift
+
+	bc <<< "
+	    scale=2
+	    100 * $num_packets / $max_packets
+	"
+}
+
+max_descriptors()
+{
+	local cell_size=$(devlink_cell_size_get)
+	local exp_perc_used=85
+	local max_descriptors
+	local pktsize=30
+
+	RET=0
+
+	max_descriptors=$(mlxsw_max_descriptors_get) || exit 1
+
+	local d0=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1)
+
+	log_info "Send many small packets, packet size = $pktsize bytes"
+	start_traffic_pktsize $pktsize $h1.111 192.0.2.33 192.0.2.34 $h2mac
+
+	# Sleep to wait for congestion.
+	sleep 5
+
+	local d1=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1)
+	((d1 == d0))
+	check_err $? "Drops seen on egress port: $d0 -> $d1 ($((d1 - d0)))"
+
+	# Check how many packets the switch can handle, the limitation is
+	# maximum descriptors.
+	local pkts_bytes=$(ethtool_stats_get $swp2 tc_transmit_queue_tc_1)
+	local pkts_num=$((pkts_bytes / cell_size))
+	local perc_used=$(percentage_used $pkts_num $max_descriptors)
+
+	check_err $(bc <<< "$perc_used < $exp_perc_used") \
+		"Expected > $exp_perc_used% of descriptors, handle $perc_used%"
+
+	stop_traffic
+	sleep 1
+
+	log_test "Maximum descriptors usage. The percentage used is $perc_used%"
+}
+
+trap cleanup EXIT
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS