diff options
| author |   Giulio Benetti <giulio.benetti@micronovasrl.com> | 2021-01-14 09:17:32 +0100 |
|---|---|---|
| committer |   Maxime Ripard <maxime@cerno.tech> | 2021-01-14 12:37:28 +0100 |
| commit | 67f4aeb2b41a0629abde3794d463547f60b0cbdd (patch) | |
| tree | d1853d0d61f8e2a38ece09e9a246f87eda8abadc | |
| parent | drm/hisilicon: Fix build error (diff) | |
| download | linux-dev-67f4aeb2b41a0629abde3794d463547f60b0cbdd.tar.xz linux-dev-67f4aeb2b41a0629abde3794d463547f60b0cbdd.zip | |
drm/sun4i: tcon: fix inverted DCLK polarity
During commit 88bc4178568b ("drm: Use new
DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_*
macros have been changed to avoid ambiguity but just because of this
ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning
_SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but
instead of swapping phase values, let's adopt an easier approach Maxime
suggested:
It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to
invert DCLK polarity and this makes things really easier than before. So
let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE
as bit 26 and activating according to bus_flags the same way it is done
for all the other signals polarity.
Fixes: 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags")
Suggested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 21 | ||||
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 |
2 files changed, 3 insertions, 19 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index eaaf5d70e352..6b9af4c08cd6 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -569,30 +569,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (info->bus_flags & DRM_BUS_FLAG_DE_LOW) val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) - clk_set_phase(tcon->dclk, 240); - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) - clk_set_phase(tcon->dclk, 0); + val |= SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE; regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE | SUN4I_TCON0_IO_POL_DE_NEGATIVE, val); diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index cfbf4e6c1679..c5ac1b02482c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -113,6 +113,7 @@ #define SUN4I_TCON0_IO_POL_REG 0x88 #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) #define SUN4I_TCON0_IO_POL_DE_NEGATIVE BIT(27) +#define SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE BIT(26) #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) #define SUN4I_TCON0_IO_POL_VSYNC_POSITIVE BIT(24) |