aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorClaudiu Manoil <claudiu.manoil@freescale.com>2014-03-07 14:42:46 +0200
committerDavid S. Miller <davem@davemloft.net>2014-03-10 13:17:22 -0400
commit71ff9e3df7e1c5d3293af6b595309124e8c97412 (patch)
tree4c68117fd4bda6b8ac7e51eca82e5c59a24c1116
parentgianfar: Separate out the Tx interrupt handling (Tx NAPI) (diff)
downloadlinux-dev-71ff9e3df7e1c5d3293af6b595309124e8c97412.tar.xz
linux-dev-71ff9e3df7e1c5d3293af6b595309124e8c97412.zip
gianfar: Use Single-Queue polling for "fsl,etsec2"
For the "fsl,etsec2" compatible models the driver currently supports 8 Tx and Rx DMA rings (aka HW queues). However, there are only 2 pairs of Rx/Tx interrupt lines, as these controllers are integrated in low power SoCs with 2 CPUs at most. As a result, there are at most 2 NAPI instances that have to service multiple Tx and Rx queues for these devices. This complicates the NAPI polling routine having to iterate over the mutiple Rx/Tx queues hooked to the same interrupt lines. And there's also an overhead at HW level, as the controller needs to service all the 8 Tx rings in a round robin manner. The combined overhead shows up for multi parallel Tx flows transmitted by the kernel stack, when the driver usually starts returning NETDEV_TX_BUSY leading to NETDEV WATCHDOG Tx timeout triggering if the Tx path is congested for too long. As an alternative, this patch makes the driver support only one Tx/Rx DMA ring per NAPI instance (per interrupt group or pair of Tx/Rx interrupt lines) by default. The simplified single queue polling routine (gfar_poll_sq) will be the default napi poll routine for the etsec2 devices too. Some adjustments needed to be made to link the Tx/Rx HW queues with each NAPI instance (2 in this case). The gfar_poll_sq() is already successfully used by older SQ_SG_MODE (single interrupt group) controllers. This patch fixes Tx timeout triggering under heavy Tx traffic load (i.e. iperf -c -P 8) for the "fsl,etsec2" (currently the only MQ_MG_MODE devices). There's also a significant memory footprint reduction by supporting 2 Rx/Tx DMA rings (at most), instead of 8, for these devices. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c70
-rw-r--r--drivers/net/ethernet/freescale/gianfar.h41
2 files changed, 79 insertions, 32 deletions
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 1aa2d55aa014..28effbecdab6 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -363,7 +363,10 @@ static void gfar_mac_rx_config(struct gfar_private *priv)
if (priv->rx_filer_enable) {
rctrl |= RCTRL_FILREN;
/* Program the RIR0 reg with the required distribution */
- gfar_write(&regs->rir0, DEFAULT_RIR0);
+ if (priv->poll_mode == GFAR_SQ_POLLING)
+ gfar_write(&regs->rir0, DEFAULT_2RXQ_RIR0);
+ else /* GFAR_MQ_POLLING */
+ gfar_write(&regs->rir0, DEFAULT_8RXQ_RIR0);
}
/* Restore PROMISC mode */
@@ -636,7 +639,6 @@ static int gfar_parse_group(struct device_node *np,
struct gfar_private *priv, const char *model)
{
struct gfar_priv_grp *grp = &priv->gfargrp[priv->num_grps];
- u32 *queue_mask;
int i;
for (i = 0; i < GFAR_NUM_IRQS; i++) {
@@ -665,12 +667,20 @@ static int gfar_parse_group(struct device_node *np,
grp->priv = priv;
spin_lock_init(&grp->grplock);
if (priv->mode == MQ_MG_MODE) {
- queue_mask = (u32 *)of_get_property(np, "fsl,rx-bit-map", NULL);
- grp->rx_bit_map = queue_mask ?
- *queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
- queue_mask = (u32 *)of_get_property(np, "fsl,tx-bit-map", NULL);
- grp->tx_bit_map = queue_mask ?
- *queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
+ u32 *rxq_mask, *txq_mask;
+ rxq_mask = (u32 *)of_get_property(np, "fsl,rx-bit-map", NULL);
+ txq_mask = (u32 *)of_get_property(np, "fsl,tx-bit-map", NULL);
+
+ if (priv->poll_mode == GFAR_SQ_POLLING) {
+ /* One Q per interrupt group: Q0 to G0, Q1 to G1 */
+ grp->rx_bit_map = (DEFAULT_MAPPING >> priv->num_grps);
+ grp->tx_bit_map = (DEFAULT_MAPPING >> priv->num_grps);
+ } else { /* GFAR_MQ_POLLING */
+ grp->rx_bit_map = rxq_mask ?
+ *rxq_mask : (DEFAULT_MAPPING >> priv->num_grps);
+ grp->tx_bit_map = txq_mask ?
+ *txq_mask : (DEFAULT_MAPPING >> priv->num_grps);
+ }
} else {
grp->rx_bit_map = 0xFF;
grp->tx_bit_map = 0xFF;
@@ -686,6 +696,8 @@ static int gfar_parse_group(struct device_node *np,
* also assign queues to groups
*/
for_each_set_bit(i, &grp->rx_bit_map, priv->num_rx_queues) {
+ if (!grp->rx_queue)
+ grp->rx_queue = priv->rx_queue[i];
grp->num_rx_queues++;
grp->rstat |= (RSTAT_CLEAR_RHALT >> i);
priv->rqueue |= ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
@@ -693,6 +705,8 @@ static int gfar_parse_group(struct device_node *np,
}
for_each_set_bit(i, &grp->tx_bit_map, priv->num_tx_queues) {
+ if (!grp->tx_queue)
+ grp->tx_queue = priv->tx_queue[i];
grp->num_tx_queues++;
grp->tstat |= (TSTAT_CLEAR_THALT >> i);
priv->tqueue |= (TQUEUE_EN0 >> i);
@@ -723,9 +737,22 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
if (!np || !of_device_is_available(np))
return -ENODEV;
- /* parse the num of tx and rx queues */
+ /* parse the num of HW tx and rx queues */
tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
- num_tx_qs = tx_queues ? *tx_queues : 1;
+ rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
+
+ if (priv->mode == SQ_SG_MODE) {
+ num_tx_qs = 1;
+ num_rx_qs = 1;
+ } else { /* MQ_MG_MODE */
+ if (priv->poll_mode == GFAR_SQ_POLLING) {
+ num_tx_qs = 2; /* one q per int group */
+ num_rx_qs = 2; /* one q per int group */
+ } else { /* GFAR_MQ_POLLING */
+ num_tx_qs = tx_queues ? *tx_queues : 1;
+ num_rx_qs = rx_queues ? *rx_queues : 1;
+ }
+ }
if (num_tx_qs > MAX_TX_QS) {
pr_err("num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
@@ -734,9 +761,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
return -EINVAL;
}
- rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
- num_rx_qs = rx_queues ? *rx_queues : 1;
-
if (num_rx_qs > MAX_RX_QS) {
pr_err("num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
num_rx_qs, MAX_RX_QS);
@@ -777,6 +801,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
/* Parse and initialize group specific information */
if (of_device_is_compatible(np, "fsl,etsec2")) {
priv->mode = MQ_MG_MODE;
+ priv->poll_mode = GFAR_SQ_POLLING;
for_each_child_of_node(np, child) {
err = gfar_parse_group(child, priv, model);
if (err)
@@ -784,6 +809,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
}
} else {
priv->mode = SQ_SG_MODE;
+ priv->poll_mode = GFAR_SQ_POLLING;
err = gfar_parse_group(np, priv, model);
if (err)
goto err_grp_init;
@@ -1263,13 +1289,13 @@ static int gfar_probe(struct platform_device *ofdev)
dev->ethtool_ops = &gfar_ethtool_ops;
/* Register for napi ...We are registering NAPI for each grp */
- if (priv->mode == SQ_SG_MODE) {
- netif_napi_add(dev, &priv->gfargrp[0].napi_rx, gfar_poll_rx_sq,
- GFAR_DEV_WEIGHT);
- netif_napi_add(dev, &priv->gfargrp[0].napi_tx, gfar_poll_tx_sq,
- 2);
- } else {
- for (i = 0; i < priv->num_grps; i++) {
+ for (i = 0; i < priv->num_grps; i++) {
+ if (priv->poll_mode == GFAR_SQ_POLLING) {
+ netif_napi_add(dev, &priv->gfargrp[i].napi_rx,
+ gfar_poll_rx_sq, GFAR_DEV_WEIGHT);
+ netif_napi_add(dev, &priv->gfargrp[i].napi_tx,
+ gfar_poll_tx_sq, 2);
+ } else {
netif_napi_add(dev, &priv->gfargrp[i].napi_rx,
gfar_poll_rx, GFAR_DEV_WEIGHT);
netif_napi_add(dev, &priv->gfargrp[i].napi_tx,
@@ -2819,7 +2845,7 @@ static int gfar_poll_rx_sq(struct napi_struct *napi, int budget)
struct gfar_priv_grp *gfargrp =
container_of(napi, struct gfar_priv_grp, napi_rx);
struct gfar __iomem *regs = gfargrp->regs;
- struct gfar_priv_rx_q *rx_queue = gfargrp->priv->rx_queue[0];
+ struct gfar_priv_rx_q *rx_queue = gfargrp->rx_queue;
int work_done = 0;
/* Clear IEVENT, so interrupts aren't called again
@@ -2850,7 +2876,7 @@ static int gfar_poll_tx_sq(struct napi_struct *napi, int budget)
struct gfar_priv_grp *gfargrp =
container_of(napi, struct gfar_priv_grp, napi_tx);
struct gfar __iomem *regs = gfargrp->regs;
- struct gfar_priv_tx_q *tx_queue = gfargrp->priv->tx_queue[0];
+ struct gfar_priv_tx_q *tx_queue = gfargrp->tx_queue;
u32 imask;
/* Clear IEVENT, so interrupts aren't called again
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 1aeb34e1efa5..84632c569f2c 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -412,7 +412,9 @@ extern const char gfar_driver_version[];
/* This default RIR value directly corresponds
* to the 3-bit hash value generated */
-#define DEFAULT_RIR0 0x05397700
+#define DEFAULT_8RXQ_RIR0 0x05397700
+/* Map even hash values to Q0, and odd ones to Q1 */
+#define DEFAULT_2RXQ_RIR0 0x04104100
/* RQFCR register bits */
#define RQFCR_GPI 0x80000000
@@ -907,6 +909,22 @@ enum {
MQ_MG_MODE
};
+/* GFAR_SQ_POLLING: Single Queue NAPI polling mode
+ * The driver supports a single pair of RX/Tx queues
+ * per interrupt group (Rx/Tx int line). MQ_MG mode
+ * devices have 2 interrupt groups, so the device will
+ * have a total of 2 Tx and 2 Rx queues in this case.
+ * GFAR_MQ_POLLING: Multi Queue NAPI polling mode
+ * The driver supports all the 8 Rx and Tx HW queues
+ * each queue mapped by the Device Tree to one of
+ * the 2 interrupt groups. This mode implies significant
+ * processing overhead (CPU and controller level).
+ */
+enum gfar_poll_mode {
+ GFAR_SQ_POLLING = 0,
+ GFAR_MQ_POLLING
+};
+
/*
* Per TX queue stats
*/
@@ -1016,17 +1034,20 @@ struct gfar_irqinfo {
*/
struct gfar_priv_grp {
- spinlock_t grplock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+ spinlock_t grplock __aligned(SMP_CACHE_BYTES);
struct napi_struct napi_rx;
struct napi_struct napi_tx;
- struct gfar_private *priv;
struct gfar __iomem *regs;
- unsigned int rstat;
- unsigned long num_rx_queues;
- unsigned long rx_bit_map;
+ struct gfar_priv_tx_q *tx_queue;
+ struct gfar_priv_rx_q *rx_queue;
unsigned int tstat;
+ unsigned int rstat;
+
+ struct gfar_private *priv;
unsigned long num_tx_queues;
unsigned long tx_bit_map;
+ unsigned long num_rx_queues;
+ unsigned long rx_bit_map;
struct gfar_irqinfo *irqinfo[GFAR_NUM_IRQS];
};
@@ -1056,8 +1077,6 @@ enum gfar_dev_state {
* the buffer descriptor determines the actual condition.
*/
struct gfar_private {
- unsigned int num_rx_queues;
-
struct device *dev;
struct net_device *ndev;
enum gfar_errata errata;
@@ -1065,6 +1084,7 @@ struct gfar_private {
u16 uses_rxfcb;
u16 padding;
+ u32 device_flags;
/* HW time stamping enabled flag */
int hwts_rx_en;
@@ -1075,10 +1095,11 @@ struct gfar_private {
struct gfar_priv_grp gfargrp[MAXGROUPS];
unsigned long state;
- u32 device_flags;
- unsigned int mode;
+ unsigned short mode;
+ unsigned short poll_mode;
unsigned int num_tx_queues;
+ unsigned int num_rx_queues;
unsigned int num_grps;
/* Network Statistics */