Merge branch 'net-dsa-microchip-add-MIB-counters-support'

Tristram Ha says:

====================
net: dsa: microchip: add MIB counters support

This series of patches is to modify the KSZ9477 DSA driver to read MIB
counters periodically to avoid overflow.

The MIB counters should be read only when there is link.  Otherwise it is
a waste of time as hardware never increases the counters.

Functions are added to check the port link status so that MIB counters
read call is used efficiently.

v4
- Use readx_poll_timeout
- Fix using mutex in a timer callback function problem
- use dp->slave directly instead of checking whether it is valid
- Add port_cleanup function in a separate patch
- Add a mutex so that changing device variables is safe

v3
- Use netif_carrier_ok instead of checking the phy device pointer

v2
- Create macro similar to readx_poll_timeout to use with switch
- Create ksz_port_cleanup function so that variables like on_ports and
  live_ports can be updated inside it

v1
- Use readx_poll_timeout
- Do not clear MIB counters when port is enabled
- Do not advertise 1000 half-duplex mode when port is enabled
- Do not use freeze function as MIB counters may miss counts
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 270 insertions, 55 deletions

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 674d77e1b029..03de50e62beb 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -2,24 +2,21 @@
 /*
  * Microchip KSZ9477 switch driver main logic
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/iopoll.h>
 #include <linux/platform_data/microchip-ksz.h>
 #include <linux/phy.h>
-#include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
 
 #include "ksz_priv.h"
-#include "ksz_common.h"
 #include "ksz9477_reg.h"
+#include "ksz_common.h"
 
 static const struct {
 	int index;
@@ -259,6 +256,75 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
 	return 0;
 }
 
+static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *cnt)
+{
+	struct ksz_poll_ctx ctx = {
+		.dev = dev,
+		.port = port,
+		.offset = REG_PORT_MIB_CTRL_STAT__4,
+	};
+	struct ksz_port *p = &dev->ports[port];
+	u32 data;
+	int ret;
+
+	/* retain the flush/freeze bit */
+	data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	data |= MIB_COUNTER_READ;
+	data |= (addr << MIB_COUNTER_INDEX_S);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+	ret = readx_poll_timeout(ksz_pread32_poll, &ctx, data,
+				 !(data & MIB_COUNTER_READ), 10, 1000);
+
+	/* failed to read MIB. get out of loop */
+	if (ret < 0) {
+		dev_dbg(dev->dev, "Failed to get MIB\n");
+		return;
+	}
+
+	/* count resets upon read */
+	ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+	*cnt += data;
+}
+
+static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	addr = ksz9477_mib_names[addr].index;
+	ksz9477_r_mib_cnt(dev, port, addr, cnt);
+}
+
+static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+	u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* enable/disable the port for flush/freeze function */
+	mutex_lock(&p->mib.cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
+
+	/* used by MIB counter reading code to know freeze is enabled */
+	p->freeze = freeze;
+	mutex_unlock(&p->mib.cnt_mutex);
+}
+
+static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+	/* flush all enabled port MIB counters */
+	mutex_lock(&mib->cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+		     MIB_COUNTER_FLUSH_FREEZE);
+	ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
+	mutex_unlock(&mib->cnt_mutex);
+
+	mib->cnt_ptr = 0;
+	memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
+}
+
 static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
 						      int port)
 {
@@ -342,47 +408,6 @@ static void ksz9477_get_strings(struct dsa_switch *ds, int port,
 	}
 }
 
-static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
-				  uint64_t *buf)
-{
-	struct ksz_device *dev = ds->priv;
-	int i;
-	u32 data;
-	int timeout;
-
-	mutex_lock(&dev->stats_mutex);
-
-	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
-		data = MIB_COUNTER_READ;
-		data |= ((ksz9477_mib_names[i].index & 0xFF) <<
-			MIB_COUNTER_INDEX_S);
-		ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
-
-		timeout = 1000;
-		do {
-			ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
-				    &data);
-			usleep_range(1, 10);
-			if (!(data & MIB_COUNTER_READ))
-				break;
-		} while (timeout-- > 0);
-
-		/* failed to read MIB. get out of loop */
-		if (!timeout) {
-			dev_dbg(dev->dev, "Failed to get MIB\n");
-			break;
-		}
-
-		/* count resets upon read */
-		ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
-
-		dev->mib_value[i] += (uint64_t)data;
-		buf[i] = dev->mib_value[i];
-	}
-
-	mutex_unlock(&dev->stats_mutex);
-}
-
 static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
 				    u8 member)
 {
@@ -425,12 +450,14 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
 			break;
 
 		member = dev->host_mask | p->vid_member;
+		mutex_lock(&dev->dev_mutex);
 
 		/* Port is a member of a bridge. */
 		if (dev->br_member & (1 << port)) {
 			dev->member |= (1 << port);
 			member = dev->member;
 		}
+		mutex_unlock(&dev->dev_mutex);
 		break;
 	case BR_STATE_BLOCKING:
 		data |= PORT_LEARN_DISABLE;
@@ -445,6 +472,7 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
 
 	ksz_pwrite8(dev, port, P_STP_CTRL, data);
 	p->stp_state = state;
+	mutex_lock(&dev->dev_mutex);
 	if (data & PORT_RX_ENABLE)
 		dev->rx_ports |= (1 << port);
 	else
@@ -469,6 +497,7 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
 	 */
 	if (forward != dev->member)
 		ksz_update_port_member(dev, port);
+	mutex_unlock(&dev->dev_mutex);
 }
 
 static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
@@ -966,6 +995,16 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
+static void ksz9477_phy_setup(struct ksz_device *dev, int port,
+			      struct phy_device *phy)
+{
+	if (port < dev->phy_port_cnt) {
+		/* The MAC actually cannot run in 1000 half-duplex mode. */
+		phy_remove_link_mode(phy,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	}
+}
+
 static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	u8 data8;
@@ -1045,6 +1084,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
 		p->phydev.duplex = 1;
 	}
+	mutex_lock(&dev->dev_mutex);
 	if (cpu_port) {
 		member = dev->port_mask;
 		dev->on_ports = dev->host_mask;
@@ -1057,6 +1097,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		if (p->phydev.link)
 			dev->live_ports |= (1 << port);
 	}
+	mutex_unlock(&dev->dev_mutex);
 	ksz9477_cfg_port_member(dev, port, member);
 
 	/* clear pending interrupts */
@@ -1141,9 +1182,14 @@ static int ksz9477_setup(struct dsa_switch *ds)
 	/* queue based egress rate limit */
 	ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
 
+	/* enable global MIB counter freeze function */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
 	/* start switch */
 	ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
 
+	ksz_init_mib_timer(dev);
+
 	return 0;
 }
 
@@ -1152,6 +1198,7 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
 	.setup			= ksz9477_setup,
 	.phy_read		= ksz9477_phy_read16,
 	.phy_write		= ksz9477_phy_write16,
+	.adjust_link		= ksz_adjust_link,
 	.port_enable		= ksz_enable_port,
 	.port_disable		= ksz_disable_port,
 	.get_strings		= ksz9477_get_strings,
@@ -1277,6 +1324,7 @@ static int ksz9477_switch_init(struct ksz_device *dev)
 	if (!dev->ports)
 		return -ENOMEM;
 	for (i = 0; i < dev->mib_port_cnt; i++) {
+		mutex_init(&dev->ports[i].mib.cnt_mutex);
 		dev->ports[i].mib.counters =
 			devm_kzalloc(dev->dev,
 				     sizeof(u64) *
@@ -1299,7 +1347,12 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.get_port_addr = ksz9477_get_port_addr,
 	.cfg_port_member = ksz9477_cfg_port_member,
 	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+	.phy_setup = ksz9477_phy_setup,
 	.port_setup = ksz9477_port_setup,
+	.r_mib_cnt = ksz9477_r_mib_cnt,
+	.r_mib_pkt = ksz9477_r_mib_pkt,
+	.freeze_mib = ksz9477_freeze_mib,
+	.port_init_cnt = ksz9477_port_init_cnt,
 	.shutdown = ksz9477_reset_switch,
 	.detect = ksz9477_switch_detect,
 	.init = ksz9477_switch_init,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8a5111f9414c..d89c97724c35 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2,7 +2,7 @@
 /*
  * Microchip switch driver main logic
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #include <linux/delay.h>
@@ -20,6 +20,16 @@
 
 #include "ksz_priv.h"
 
+void ksz_port_cleanup(struct ksz_device *dev, int port)
+{
+	/* Common code for port cleanup. */
+	mutex_lock(&dev->dev_mutex);
+	dev->on_ports &= ~(1 << port);
+	dev->live_ports &= ~(1 << port);
+	mutex_unlock(&dev->dev_mutex);
+}
+EXPORT_SYMBOL_GPL(ksz_port_cleanup);
+
 void ksz_update_port_member(struct ksz_device *dev, int port)
 {
 	struct ksz_port *p;
@@ -40,6 +50,85 @@ void ksz_update_port_member(struct ksz_device *dev, int port)
 }
 EXPORT_SYMBOL_GPL(ksz_update_port_member);
 
+static void port_r_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+	u64 *dropped;
+
+	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->reg_mib_cnt) {
+		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+					&mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+
+	/* last one in storage */
+	dropped = &mib->counters[dev->mib_cnt];
+
+	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->mib_cnt) {
+		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+					dropped, &mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+	mib->cnt_ptr = 0;
+}
+
+static void ksz_mib_read_work(struct work_struct *work)
+{
+	struct ksz_device *dev = container_of(work, struct ksz_device,
+					      mib_read);
+	struct ksz_port_mib *mib;
+	struct ksz_port *p;
+	int i;
+
+	for (i = 0; i < dev->mib_port_cnt; i++) {
+		p = &dev->ports[i];
+		mib = &p->mib;
+		mutex_lock(&mib->cnt_mutex);
+
+		/* Only read MIB counters when the port is told to do.
+		 * If not, read only dropped counters when link is not up.
+		 */
+		if (!p->read) {
+			const struct dsa_port *dp = dsa_to_port(dev->ds, i);
+
+			if (!netif_carrier_ok(dp->slave))
+				mib->cnt_ptr = dev->reg_mib_cnt;
+		}
+		port_r_cnt(dev, i);
+		p->read = false;
+		mutex_unlock(&mib->cnt_mutex);
+	}
+}
+
+static void mib_monitor(struct timer_list *t)
+{
+	struct ksz_device *dev = from_timer(dev, t, mib_read_timer);
+
+	mod_timer(&dev->mib_read_timer, jiffies + dev->mib_read_interval);
+	schedule_work(&dev->mib_read);
+}
+
+void ksz_init_mib_timer(struct ksz_device *dev)
+{
+	int i;
+
+	/* Read MIB counters every 30 seconds to avoid overflow. */
+	dev->mib_read_interval = msecs_to_jiffies(30000);
+
+	INIT_WORK(&dev->mib_read, ksz_mib_read_work);
+	timer_setup(&dev->mib_read_timer, mib_monitor, 0);
+
+	for (i = 0; i < dev->mib_port_cnt; i++)
+		dev->dev_ops->port_init_cnt(dev, i);
+
+	/* Start the timer 2 seconds later. */
+	dev->mib_read_timer.expires = jiffies + msecs_to_jiffies(2000);
+	add_timer(&dev->mib_read_timer);
+}
+EXPORT_SYMBOL_GPL(ksz_init_mib_timer);
+
 int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
 {
 	struct ksz_device *dev = ds->priv;
@@ -61,6 +150,27 @@ int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 }
 EXPORT_SYMBOL_GPL(ksz_phy_write16);
 
+void ksz_adjust_link(struct dsa_switch *ds, int port,
+		     struct phy_device *phydev)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* Read all MIB counters when the link is going down. */
+	if (!phydev->link) {
+		p->read = true;
+		schedule_work(&dev->mib_read);
+	}
+	mutex_lock(&dev->dev_mutex);
+	if (!phydev->link)
+		dev->live_ports &= ~(1 << port);
+	else
+		/* Remember which port is connected and active. */
+		dev->live_ports |= (1 << port) & dev->on_ports;
+	mutex_unlock(&dev->dev_mutex);
+}
+EXPORT_SYMBOL_GPL(ksz_adjust_link);
+
 int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
 {
 	struct ksz_device *dev = ds->priv;
@@ -72,12 +182,32 @@ int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
 }
 EXPORT_SYMBOL_GPL(ksz_sset_count);
 
+void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf)
+{
+	const struct dsa_port *dp = dsa_to_port(ds, port);
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port_mib *mib;
+
+	mib = &dev->ports[port].mib;
+	mutex_lock(&mib->cnt_mutex);
+
+	/* Only read dropped counters if no link. */
+	if (!netif_carrier_ok(dp->slave))
+		mib->cnt_ptr = dev->reg_mib_cnt;
+	port_r_cnt(dev, port);
+	memcpy(buf, mib->counters, dev->mib_cnt * sizeof(u64));
+	mutex_unlock(&mib->cnt_mutex);
+}
+EXPORT_SYMBOL_GPL(ksz_get_ethtool_stats);
+
 int ksz_port_bridge_join(struct dsa_switch *ds, int port,
 			 struct net_device *br)
 {
 	struct ksz_device *dev = ds->priv;
 
+	mutex_lock(&dev->dev_mutex);
 	dev->br_member |= (1 << port);
+	mutex_unlock(&dev->dev_mutex);
 
 	/* port_stp_state_set() will be called after to put the port in
 	 * appropriate state so there is no need to do anything.
@@ -92,8 +222,10 @@ void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
 {
 	struct ksz_device *dev = ds->priv;
 
+	mutex_lock(&dev->dev_mutex);
 	dev->br_member &= ~(1 << port);
 	dev->member &= ~(1 << port);
+	mutex_unlock(&dev->dev_mutex);
 
 	/* port_stp_state_set() will be called after to put the port in
 	 * forwarding state so there is no need to do anything.
@@ -238,6 +370,7 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	/* setup slave port */
 	dev->dev_ops->port_setup(dev, port, false);
+	dev->dev_ops->phy_setup(dev, port, phy);
 
 	/* port_stp_state_set() will be called after to enable the port so
 	 * there is no need to do anything.
@@ -305,6 +438,7 @@ int ksz_switch_register(struct ksz_device *dev,
 		gpiod_set_value(dev->reset_gpio, 0);
 	}
 
+	mutex_init(&dev->dev_mutex);
 	mutex_init(&dev->reg_mutex);
 	mutex_init(&dev->stats_mutex);
 	mutex_init(&dev->alu_mutex);
@@ -338,6 +472,12 @@ EXPORT_SYMBOL(ksz_switch_register);
 
 void ksz_switch_remove(struct ksz_device *dev)
 {
+	/* timer started */
+	if (dev->mib_read_timer.expires) {
+		del_timer_sync(&dev->mib_read_timer);
+		flush_work(&dev->mib_read);
+	}
+
 	dev->dev_ops->exit(dev);
 	dsa_unregister_switch(dev->ds);
 
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 2dd832de0d52..0d25bc44f453 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -1,19 +1,24 @@
 /* SPDX-License-Identifier: GPL-2.0
  * Microchip switch driver common header
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #ifndef __KSZ_COMMON_H
 #define __KSZ_COMMON_H
 
+void ksz_port_cleanup(struct ksz_device *dev, int port);
 void ksz_update_port_member(struct ksz_device *dev, int port);
+void ksz_init_mib_timer(struct ksz_device *dev);
 
 /* Common DSA access functions */
 
 int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
 int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+void ksz_adjust_link(struct dsa_switch *ds, int port,
+		     struct phy_device *phydev);
 int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
+void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf);
 int ksz_port_bridge_join(struct dsa_switch *ds, int port,
 			 struct net_device *br);
 void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
@@ -211,4 +216,18 @@ static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 	ksz_write8(dev, addr, data);
 }
 
+struct ksz_poll_ctx {
+	struct ksz_device *dev;
+	int port;
+	int offset;
+};
+
+static inline u32 ksz_pread32_poll(struct ksz_poll_ctx *ctx)
+{
+	u32 data;
+
+	ksz_pread32(ctx->dev, ctx->port, ctx->offset, &data);
+	return data;
+}
+
 #endif
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 60b49010904b..b52e5ca17ab4 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -2,7 +2,7 @@
  *
  * Microchip KSZ series switch common definitions
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #ifndef __KSZ_PRIV_H
@@ -14,8 +14,6 @@
 #include <linux/etherdevice.h>
 #include <net/dsa.h>
 
-#include "ksz9477_reg.h"
-
 struct ksz_io_ops;
 
 struct vlan_table {
@@ -23,6 +21,7 @@ struct vlan_table {
 };
 
 struct ksz_port_mib {
+	struct mutex cnt_mutex;		/* structure access */
 	u8 cnt_ptr;
 	u64 *counters;
 };
@@ -38,7 +37,8 @@ struct ksz_port {
 	u32 fiber:1;			/* port is fiber */
 	u32 sgmii:1;			/* port is SGMII */
 	u32 force:1;
-	u32 link_just_down:1;		/* link just goes down */
+	u32 read:1;			/* read MIB counters in background */
+	u32 freeze:1;			/* MIB counter freeze is enabled */
 
 	struct ksz_port_mib mib;
 };
@@ -48,6 +48,7 @@ struct ksz_device {
 	struct ksz_platform_data *pdata;
 	const char *name;
 
+	struct mutex dev_mutex;		/* device access */
 	struct mutex reg_mutex;		/* register access */
 	struct mutex stats_mutex;	/* status access */
 	struct mutex alu_mutex;		/* ALU access */
@@ -79,8 +80,6 @@ struct ksz_device {
 
 	struct vlan_table *vlan_cache;
 
-	u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
-
 	u8 *txbuf;
 
 	struct ksz_port *ports;
@@ -137,6 +136,9 @@ struct ksz_dev_ops {
 	u32 (*get_port_addr)(int port, int offset);
 	void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
 	void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+	void (*phy_setup)(struct ksz_device *dev, int port,
+			  struct phy_device *phy);
+	void (*port_cleanup)(struct ksz_device *dev, int port);
 	void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
 	void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 	void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
@@ -151,6 +153,7 @@ struct ksz_dev_ops {
 			  u64 *cnt);
 	void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
 			  u64 *dropped, u64 *cnt);
+	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
 	int (*shutdown)(struct ksz_device *dev);
 	int (*detect)(struct ksz_device *dev);