Merge branch 'enetc-Add-mdio-support-and-device-tree-nodes'

Claudiu Manoil says:

====================
enetc: Add mdio support and device tree nodes

This is the missing part to enable PCI probing of the ENETC ethernet
ports on the LS1028A SoC and external traffic on the LS1028A RDB board.
It's one of the first items on the TODO list for the recently merged
ENETC ethernet driver.

v3: Add DT bindings doc for ENETC connections
v4: none
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 340 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
new file mode 100644
index 000000000000..c812e25ae90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -0,0 +1,69 @@
+* ENETC ethernet device tree bindings
+
+Depending on board design and ENETC port type (internal or
+external) there are two supported link modes specified by
+below device tree bindings.
+
+Required properties:
+
+- reg		: Specifies PCIe Device Number and Function
+		  Number of the ENETC endpoint device, according
+		  to parent node bindings.
+- compatible	: Should be "fsl,enetc".
+
+1) The ENETC external port is connected to a MDIO configurable phy:
+
+In this case, the ENETC node should include a "mdio" sub-node
+that in turn should contain the "ethernet-phy" node describing the
+external phy.  Below properties are required, their bindings
+already defined in ethernet.txt or phy.txt, under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- phy-handle		: Phandle to a PHY on the MDIO bus.
+			  Defined in ethernet.txt.
+
+- phy-connection-type	: Defined in ethernet.txt.
+
+- mdio			: "mdio" node, defined in mdio.txt.
+
+- ethernet-phy		: "ethernet-phy" node, defined in phy.txt.
+
+Example:
+
+	ethernet@0,0 {
+		compatible = "fsl,enetc";
+		reg = <0x000000 0 0 0 0>;
+		phy-handle = <&sgmii_phy0>;
+		phy-connection-type = "sgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			sgmii_phy0: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+	};
+
+2) The ENETC port is an internal port or has a fixed-link external
+connection:
+
+In this case, the ENETC port node defines a fixed link connection,
+as specified by "fixed-link.txt", under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- fixed-link	: "fixed-link" node, defined in "fixed-link.txt".
+
+Example:
+	ethernet@0,2 {
+		compatible = "fsl,enetc";
+		reg = <0x000200 0 0 0 0>;
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index fdeb4176fc33..f86b054a74ae 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -71,3 +71,20 @@
 &duart1 {
 	status = "okay";
 };
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+	};
+};
+
+&enetc_port1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index a8cf92af05fb..2896bbcfa3bb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -335,5 +335,40 @@
 				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
+			compatible = "pci-host-ecam-generic";
+			reg = <0x01 0xf0000000 0x0 0x100000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-parent = <&its>;
+			device_type = "pci";
+			bus-range = <0x0 0x0>;
+			dma-coherent;
+			msi-map = <0 &its 0x17 0xe>;
+			iommu-map = <0 &smmu 0x17 0xe>;
+				  /* PF0-6 BAR0 - non-prefetchable memory */
+			ranges = <0x82000000 0x0 0x00000000  0x1 0xf8000000  0x0 0x160000
+				  /* PF0-6 BAR2 - prefetchable memory */
+				  0xc2000000 0x0 0x00000000  0x1 0xf8160000  0x0 0x070000
+				  /* PF0: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xf81d0000  0x0 0x020000
+				  /* PF0: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x0 0x00000000  0x1 0xf81f0000  0x0 0x020000
+				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
+				  /* PF1: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
+
+			enetc_port0: ethernet@0,0 {
+				compatible = "fsl,enetc";
+				reg = <0x000000 0 0 0 0>;
+			};
+			enetc_port1: ethernet@0,1 {
+				compatible = "fsl,enetc";
+				reg = <0x000100 0 0 0 0>;
+			};
+		};
 	};
 };
diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile
index 697660294dbc..7139e414dccf 100644
--- a/drivers/net/ethernet/freescale/enetc/Makefile
+++ b/drivers/net/ethernet/freescale/enetc/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
-fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o
+fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o \
+				 enetc_mdio.o
 fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
 fsl-enetc-objs := enetc_pf.o $(fsl-enetc-y)
 
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
new file mode 100644
index 000000000000..77b9cd10ba2b
--- /dev/null
+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2019 NXP */
+
+#include <linux/mdio.h>
+#include <linux/of_mdio.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+
+#include "enetc_pf.h"
+
+struct enetc_mdio_regs {
+	u32	mdio_cfg;	/* MDIO configuration and status */
+	u32	mdio_ctl;	/* MDIO control */
+	u32	mdio_data;	/* MDIO data */
+	u32	mdio_addr;	/* MDIO address */
+};
+
+#define bus_to_enetc_regs(bus)	(struct enetc_mdio_regs __iomem *)((bus)->priv)
+
+#define ENETC_MDIO_REG_OFFSET	0x1c00
+#define ENETC_MDC_DIV		258
+
+#define MDIO_CFG_CLKDIV(x)	((((x) >> 1) & 0xff) << 8)
+#define MDIO_CFG_BSY		BIT(0)
+#define MDIO_CFG_RD_ER		BIT(1)
+#define MDIO_CFG_ENC45		BIT(6)
+ /* external MDIO only - driven on neg MDC edge */
+#define MDIO_CFG_NEG		BIT(23)
+
+#define MDIO_CTL_DEV_ADDR(x)	((x) & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x)	(((x) & 0x1f) << 5)
+#define MDIO_CTL_READ		BIT(15)
+#define MDIO_DATA(x)		((x) & 0xffff)
+
+#define TIMEOUT	1000
+static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs)
+{
+	u32 val;
+
+	return readx_poll_timeout(enetc_rd_reg, &regs->mdio_cfg, val,
+				  !(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT);
+}
+
+static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+			    u16 value)
+{
+	struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+	u32 mdio_ctl, mdio_cfg;
+	u16 dev_addr;
+	int ret;
+
+	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+	if (regnum & MII_ADDR_C45) {
+		dev_addr = (regnum >> 16) & 0x1f;
+		mdio_cfg |= MDIO_CFG_ENC45;
+	} else {
+		/* clause 22 (ie 1G) */
+		dev_addr = regnum & 0x1f;
+		mdio_cfg &= ~MDIO_CFG_ENC45;
+	}
+
+	enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* set port and dev addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+	/* set the register address */
+	if (regnum & MII_ADDR_C45) {
+		enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+		ret = enetc_mdio_wait_complete(regs);
+		if (ret)
+			return ret;
+	}
+
+	/* write the value */
+	enetc_wr_reg(&regs->mdio_data, MDIO_DATA(value));
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+	u32 mdio_ctl, mdio_cfg;
+	u16 dev_addr, value;
+	int ret;
+
+	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+	if (regnum & MII_ADDR_C45) {
+		dev_addr = (regnum >> 16) & 0x1f;
+		mdio_cfg |= MDIO_CFG_ENC45;
+	} else {
+		dev_addr = regnum & 0x1f;
+		mdio_cfg &= ~MDIO_CFG_ENC45;
+	}
+
+	enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* set port and device addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+	/* set the register address */
+	if (regnum & MII_ADDR_C45) {
+		enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+		ret = enetc_mdio_wait_complete(regs);
+		if (ret)
+			return ret;
+	}
+
+	/* initiate the read */
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl | MDIO_CTL_READ);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* return all Fs if nothing was there */
+	if (enetc_rd_reg(&regs->mdio_cfg) & MDIO_CFG_RD_ER) {
+		dev_dbg(&bus->dev,
+			"Error while reading PHY%d reg at %d.%hhu\n",
+			phy_id, dev_addr, regnum);
+		return 0xffff;
+	}
+
+	value = enetc_rd_reg(&regs->mdio_data) & 0xffff;
+
+	return value;
+}
+
+int enetc_mdio_probe(struct enetc_pf *pf)
+{
+	struct device *dev = &pf->si->pdev->dev;
+	struct enetc_mdio_regs __iomem *regs;
+	struct device_node *np;
+	struct mii_bus *bus;
+	int ret;
+
+	bus = mdiobus_alloc_size(sizeof(regs));
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "Freescale ENETC MDIO Bus";
+	bus->read = enetc_mdio_read;
+	bus->write = enetc_mdio_write;
+	bus->parent = dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+
+	/* store the enetc mdio base address for this bus */
+	regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET;
+	bus->priv = regs;
+
+	np = of_get_child_by_name(dev->of_node, "mdio");
+	if (!np) {
+		dev_err(dev, "MDIO node missing\n");
+		ret = -EINVAL;
+		goto err_registration;
+	}
+
+	ret = of_mdiobus_register(bus, np);
+	if (ret) {
+		of_node_put(np);
+		dev_err(dev, "cannot register MDIO bus\n");
+		goto err_registration;
+	}
+
+	of_node_put(np);
+	pf->mdio = bus;
+
+	return 0;
+
+err_registration:
+	mdiobus_free(bus);
+
+	return ret;
+}
+
+void enetc_mdio_remove(struct enetc_pf *pf)
+{
+	if (pf->mdio) {
+		mdiobus_unregister(pf->mdio);
+		mdiobus_free(pf->mdio);
+	}
+}
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 7d28f5e9b46b..15876a6e7598 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -746,6 +746,7 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 
 static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
 {
+	struct enetc_pf *pf = enetc_si_priv(priv->si);
 	struct device_node *np = priv->dev->of_node;
 	int err;
 
@@ -770,12 +771,22 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
 		priv->phy_node = of_node_get(np);
 	}
 
+	if (!of_phy_is_fixed_link(np)) {
+		err = enetc_mdio_probe(pf);
+		if (err) {
+			of_node_put(priv->phy_node);
+			return err;
+		}
+	}
+
 	priv->if_mode = of_get_phy_mode(np);
 	if (priv->if_mode < 0) {
 		dev_err(priv->dev, "missing phy type\n");
 		of_node_put(priv->phy_node);
 		if (of_phy_is_fixed_link(np))
 			of_phy_deregister_fixed_link(np);
+		else
+			enetc_mdio_remove(pf);
 
 		return -EINVAL;
 	}
@@ -898,6 +909,7 @@ static void enetc_pf_remove(struct pci_dev *pdev)
 
 	unregister_netdev(si->ndev);
 
+	enetc_mdio_remove(pf);
 	enetc_of_put_phy(priv);
 
 	enetc_free_msix(priv);
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index 2061ae5ccba0..10dd1b53bb08 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -42,8 +42,14 @@ struct enetc_pf {
 	char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */
 	DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE);
 	DECLARE_BITMAP(active_vlans, VLAN_N_VID);
+
+	struct mii_bus *mdio; /* saved for cleanup */
 };
 
 int enetc_msg_psi_init(struct enetc_pf *pf);
 void enetc_msg_psi_free(struct enetc_pf *pf);
 void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status);
+
+/* MDIO */
+int enetc_mdio_probe(struct enetc_pf *pf);
+void enetc_mdio_remove(struct enetc_pf *pf);