diff options
| author |   Mike Marciniszyn <mike.marciniszyn@intel.com> | 2015-07-30 15:17:43 -0400 |
|---|---|---|
| committer |   Doug Ledford <dledford@redhat.com> | 2015-08-28 22:59:36 -0400 |
| commit | 7724105686e718ac476a6ad3304fea2fbcfcffde (patch) | |
| tree | 743567a9714e95b0f803b74a7278c825e79d529f | |
| parent | IB/core: Add core header changes needed for OPA (diff) | |
| download | linux-dev-7724105686e718ac476a6ad3304fea2fbcfcffde.tar.xz linux-dev-7724105686e718ac476a6ad3304fea2fbcfcffde.zip | |
IB/hfi1: add driver files
Signed-off-by: Andrew Friedley <andrew.friedley@intel.com>
Signed-off-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Brendan Cunningham <brendan.cunningham@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Signed-off-by: John Gregor <john.a.gregor@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Kevin Pine <kevin.pine@intel.com>
Signed-off-by: Kyle Liddell <kyle.liddell@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ravi Krishnaswamy <ravi.krishnaswamy@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Sanath Kumar <sanath.s.kumar@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Vlad Danushevsky <vladimir.danusevsky@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
60 files changed, 57480 insertions, 0 deletions
diff --git a/Documentation/infiniband/sysfs.txt b/Documentation/infiniband/sysfs.txt index ddd519b72ee1..9028b025501a 100644 --- a/Documentation/infiniband/sysfs.txt +++ b/Documentation/infiniband/sysfs.txt @@ -64,3 +64,23 @@ MTHCA fw_ver - Firmware version hca_type - HCA type: "MT23108", "MT25208 (MT23108 compat mode)", or "MT25208" + +HFI1 + + The hfi1 driver also creates these additional files: + + hw_rev - hardware revision + board_id - manufacturing board id + tempsense - thermal sense information + serial - board serial number + nfreectxts - number of free user contexts + nctxts - number of allowed contexts (PSM2) + chip_reset - diagnostic (root only) + boardversion - board version + ports/1/ + CMgtA/ + cc_settings_bin - CCA tables used by PSM2 + cc_table_bin + sc2v/ - 32 files (0 - 31) used to translate sl->vl + sl2sc/ - 32 files (0 - 31) used to translate sl->sc + vl2mtu/ - 16 (0 - 15) files used to determine MTU for vl diff --git a/MAINTAINERS b/MAINTAINERS index db1a523ed493..2249ac889076 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9809,6 +9809,12 @@ M: Arnaud Patard <arnaud.patard@rtp-net.org> S: Odd Fixes F: drivers/staging/xgifb/ +HFI1 DRIVER +M: Mike Marciniszyn <infinipath@intel.com> +L: linux-rdma@vger.kernel.org +S: Supported +F: drivers/staging/rdma/hfi1 + STARFIRE/DURALAN NETWORK DRIVER M: Ion Badulescu <ionut@badula.org> S: Odd Fixes diff --git a/drivers/staging/rdma/Kconfig b/drivers/staging/rdma/Kconfig index 5084088c8946..cf5fe9bb87a1 100644 --- a/drivers/staging/rdma/Kconfig +++ b/drivers/staging/rdma/Kconfig @@ -24,6 +24,8 @@ if STAGING_RDMA source "drivers/staging/rdma/amso1100/Kconfig" +source "drivers/staging/rdma/hfi1/Kconfig" + source "drivers/staging/rdma/ipath/Kconfig" endif diff --git a/drivers/staging/rdma/Makefile b/drivers/staging/rdma/Makefile index a2a459ac8d67..cbd915ac7f20 100644 --- a/drivers/staging/rdma/Makefile +++ b/drivers/staging/rdma/Makefile @@ -1,3 +1,4 @@ # Entries for RDMA_STAGING tree obj-$(CONFIG_INFINIBAND_AMSO1100) += amso1100/ +obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/ obj-$(CONFIG_INFINIBAND_IPATH) += ipath/ diff --git a/drivers/staging/rdma/hfi1/Kconfig b/drivers/staging/rdma/hfi1/Kconfig new file mode 100644 index 000000000000..fd25078ee923 --- /dev/null +++ b/drivers/staging/rdma/hfi1/Kconfig @@ -0,0 +1,37 @@ +config INFINIBAND_HFI1 + tristate "Intel OPA Gen1 support" + depends on X86_64 + default m + ---help--- + This is a low-level driver for Intel OPA Gen1 adapter. +config HFI1_DEBUG_SDMA_ORDER + bool "HFI1 SDMA Order debug" + depends on INFINIBAND_HFI1 + default n + ---help--- + This is a debug flag to test for out of order + sdma completions for unit testing +config HFI1_VERBS_31BIT_PSN + bool "HFI1 enable 31 bit PSN" + depends on INFINIBAND_HFI1 + default y + ---help--- + Setting this enables 31 BIT PSN + For verbs RC/UC +config SDMA_VERBOSITY + bool "Config SDMA Verbosity" + depends on INFINIBAND_HFI1 + default n + ---help--- + This is a configuration flag to enable verbose + SDMA debug +config PRESCAN_RXQ + bool "Enable prescanning of the RX queue for ECNs" + depends on INFINIBAND_HFI1 + default n + ---help--- + This option toggles the prescanning of the receive queue for + Explicit Congestion Notifications. If an ECN is detected, it + is processed as quickly as possible, the ECN is toggled off. + After the prescanning step, the receive queue is processed as + usual. diff --git a/drivers/staging/rdma/hfi1/Makefile b/drivers/staging/rdma/hfi1/Makefile new file mode 100644 index 000000000000..2e5daa6cdcc2 --- /dev/null +++ b/drivers/staging/rdma/hfi1/Makefile @@ -0,0 +1,19 @@ +# +# HFI driver +# +# +# +# Called from the kernel module build system. +# +obj-$(CONFIG_INFINIBAND_HFI1) += hfi1.o + +hfi1-y := chip.o cq.o device.o diag.o dma.o driver.o eprom.o file_ops.o firmware.o \ + init.o intr.o keys.o mad.o mmap.o mr.o pcie.o pio.o pio_copy.o \ + qp.o qsfp.o rc.o ruc.o sdma.o srq.o sysfs.o trace.o twsi.o \ + uc.o ud.o user_pages.o user_sdma.o verbs_mcast.o verbs.o +hfi1-$(CONFIG_DEBUG_FS) += debugfs.o + +CFLAGS_trace.o = -I$(src) +ifdef MVERSION +CFLAGS_driver.o = -DHFI_DRIVER_VERSION_BASE=\"$(MVERSION)\" +endif diff --git a/drivers/staging/rdma/hfi1/TODO b/drivers/staging/rdma/hfi1/TODO new file mode 100644 index 000000000000..05de0dad8762 --- /dev/null +++ b/drivers/staging/rdma/hfi1/TODO @@ -0,0 +1,6 @@ +July, 2015 + +- Remove unneeded file entries in sysfs +- Remove software processing of IB protocol and place in library for use + by qib, ipath (if still present), hfi1, and eventually soft-roce + diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c new file mode 100644 index 000000000000..654eafef1d30 --- /dev/null +++ b/drivers/staging/rdma/hfi1/chip.c @@ -0,0 +1,10798 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * This file contains all of the code that is specific to the HFI chip + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> + +#include "hfi.h" +#include "trace.h" +#include "mad.h" +#include "pio.h" +#include "sdma.h" +#include "eprom.h" + +#define NUM_IB_PORTS 1 + +uint kdeth_qp; +module_param_named(kdeth_qp, kdeth_qp, uint, S_IRUGO); +MODULE_PARM_DESC(kdeth_qp, "Set the KDETH queue pair prefix"); + +uint num_vls = HFI1_MAX_VLS_SUPPORTED; +module_param(num_vls, uint, S_IRUGO); +MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); + +/* + * Default time to aggregate two 10K packets from the idle state + * (timer not running). The timer starts at the end of the first packet, + * so only the time for one 10K packet and header plus a bit extra is needed. + * 10 * 1024 + 64 header byte = 10304 byte + * 10304 byte / 12.5 GB/s = 824.32ns + */ +uint rcv_intr_timeout = (824 + 16); /* 16 is for coalescing interrupt */ +module_param(rcv_intr_timeout, uint, S_IRUGO); +MODULE_PARM_DESC(rcv_intr_timeout, "Receive interrupt mitigation timeout in ns"); + +uint rcv_intr_count = 16; /* same as qib */ +module_param(rcv_intr_count, uint, S_IRUGO); +MODULE_PARM_DESC(rcv_intr_count, "Receive interrupt mitigation count"); + +ushort link_crc_mask = SUPPORTED_CRCS; +module_param(link_crc_mask, ushort, S_IRUGO); +MODULE_PARM_DESC(link_crc_mask, "CRCs to use on the link"); + +uint loopback; +module_param_named(loopback, loopback, uint, S_IRUGO); +MODULE_PARM_DESC(loopback, "Put into loopback mode (1 = serdes, 3 = external cable"); + +/* Other driver tunables */ +uint rcv_intr_dynamic = 1; /* enable dynamic mode for rcv int mitigation*/ +static ushort crc_14b_sideband = 1; +static uint use_flr = 1; +uint quick_linkup; /* skip LNI */ + +struct flag_table { + u64 flag; /* the flag */ + char *str; /* description string */ + u16 extra; /* extra information */ + u16 unused0; + u32 unused1; +}; + +/* str must be a string constant */ +#define FLAG_ENTRY(str, extra, flag) {flag, str, extra} +#define FLAG_ENTRY0(str, flag) {flag, str, 0} + +/* Send Error Consequences */ +#define SEC_WRITE_DROPPED 0x1 +#define SEC_PACKET_DROPPED 0x2 +#define SEC_SC_HALTED 0x4 /* per-context only */ +#define SEC_SPC_FREEZE 0x8 /* per-HFI only */ + +#define VL15CTXT 1 +#define MIN_KERNEL_KCTXTS 2 +#define NUM_MAP_REGS 32 + +/* Bit offset into the GUID which carries HFI id information */ +#define GUID_HFI_INDEX_SHIFT 39 + +/* extract the emulation revision */ +#define emulator_rev(dd) ((dd)->irev >> 8) +/* parallel and serial emulation versions are 3 and 4 respectively */ +#define is_emulator_p(dd) ((((dd)->irev) & 0xf) == 3) +#define is_emulator_s(dd) ((((dd)->irev) & 0xf) == 4) + +/* RSM fields */ + +/* packet type */ +#define IB_PACKET_TYPE 2ull +#define QW_SHIFT 6ull +/* QPN[7..1] */ +#define QPN_WIDTH 7ull + +/* LRH.BTH: QW 0, OFFSET 48 - for match */ +#define LRH_BTH_QW 0ull +#define LRH_BTH_BIT_OFFSET 48ull +#define LRH_BTH_OFFSET(off) ((LRH_BTH_QW << QW_SHIFT) | (off)) +#define LRH_BTH_MATCH_OFFSET LRH_BTH_OFFSET(LRH_BTH_BIT_OFFSET) +#define LRH_BTH_SELECT +#define LRH_BTH_MASK 3ull +#define LRH_BTH_VALUE 2ull + +/* LRH.SC[3..0] QW 0, OFFSET 56 - for match */ +#define LRH_SC_QW 0ull +#define LRH_SC_BIT_OFFSET 56ull +#define LRH_SC_OFFSET(off) ((LRH_SC_QW << QW_SHIFT) | (off)) +#define LRH_SC_MATCH_OFFSET LRH_SC_OFFSET(LRH_SC_BIT_OFFSET) +#define LRH_SC_MASK 128ull +#define LRH_SC_VALUE 0ull + +/* SC[n..0] QW 0, OFFSET 60 - for select */ +#define LRH_SC_SELECT_OFFSET ((LRH_SC_QW << QW_SHIFT) | (60ull)) + +/* QPN[m+n:1] QW 1, OFFSET 1 */ +#define QPN_SELECT_OFFSET ((1ull << QW_SHIFT) | (1ull)) + +/* defines to build power on SC2VL table */ +#define SC2VL_VAL( \ + num, \ + sc0, sc0val, \ + sc1, sc1val, \ + sc2, sc2val, \ + sc3, sc3val, \ + sc4, sc4val, \ + sc5, sc5val, \ + sc6, sc6val, \ + sc7, sc7val) \ +( \ + ((u64)(sc0val) << SEND_SC2VLT##num##_SC##sc0##_SHIFT) | \ + ((u64)(sc1val) << SEND_SC2VLT##num##_SC##sc1##_SHIFT) | \ + ((u64)(sc2val) << SEND_SC2VLT##num##_SC##sc2##_SHIFT) | \ + ((u64)(sc3val) << SEND_SC2VLT##num##_SC##sc3##_SHIFT) | \ + ((u64)(sc4val) << SEND_SC2VLT##num##_SC##sc4##_SHIFT) | \ + ((u64)(sc5val) << SEND_SC2VLT##num##_SC##sc5##_SHIFT) | \ + ((u64)(sc6val) << SEND_SC2VLT##num##_SC##sc6##_SHIFT) | \ + ((u64)(sc7val) << SEND_SC2VLT##num##_SC##sc7##_SHIFT) \ +) + +#define DC_SC_VL_VAL( \ + range, \ + e0, e0val, \ + e1, e1val, \ + e2, e2val, \ + e3, e3val, \ + e4, e4val, \ + e5, e5val, \ + e6, e6val, \ + e7, e7val, \ + e8, e8val, \ + e9, e9val, \ + e10, e10val, \ + e11, e11val, \ + e12, e12val, \ + e13, e13val, \ + e14, e14val, \ + e15, e15val) \ +( \ + ((u64)(e0val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e0##_SHIFT) | \ + ((u64)(e1val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e1##_SHIFT) | \ + ((u64)(e2val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e2##_SHIFT) | \ + ((u64)(e3val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e3##_SHIFT) | \ + ((u64)(e4val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e4##_SHIFT) | \ + ((u64)(e5val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e5##_SHIFT) | \ + ((u64)(e6val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e6##_SHIFT) | \ + ((u64)(e7val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e7##_SHIFT) | \ + ((u64)(e8val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e8##_SHIFT) | \ + ((u64)(e9val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e9##_SHIFT) | \ + ((u64)(e10val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e10##_SHIFT) | \ + ((u64)(e11val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e11##_SHIFT) | \ + ((u64)(e12val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e12##_SHIFT) | \ + ((u64)(e13val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e13##_SHIFT) | \ + ((u64)(e14val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e14##_SHIFT) | \ + ((u64)(e15val) << DCC_CFG_SC_VL_TABLE_##range##_ENTRY##e15##_SHIFT) \ +) + +/* all CceStatus sub-block freeze bits */ +#define ALL_FROZE (CCE_STATUS_SDMA_FROZE_SMASK \ + | CCE_STATUS_RXE_FROZE_SMASK \ + | CCE_STATUS_TXE_FROZE_SMASK \ + | CCE_STATUS_TXE_PIO_FROZE_SMASK) +/* all CceStatus sub-block TXE pause bits */ +#define ALL_TXE_PAUSE (CCE_STATUS_TXE_PIO_PAUSED_SMASK \ + | CCE_STATUS_TXE_PAUSED_SMASK \ + | CCE_STATUS_SDMA_PAUSED_SMASK) +/* all CceStatus sub-block RXE pause bits */ +#define ALL_RXE_PAUSE CCE_STATUS_RXE_PAUSED_SMASK + +/* + * CCE Error flags. + */ +static struct flag_table cce_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("CceCsrParityErr", + CCE_ERR_STATUS_CCE_CSR_PARITY_ERR_SMASK), +/* 1*/ FLAG_ENTRY0("CceCsrReadBadAddrErr", + CCE_ERR_STATUS_CCE_CSR_READ_BAD_ADDR_ERR_SMASK), +/* 2*/ FLAG_ENTRY0("CceCsrWriteBadAddrErr", + CCE_ERR_STATUS_CCE_CSR_WRITE_BAD_ADDR_ERR_SMASK), +/* 3*/ FLAG_ENTRY0("CceTrgtAsyncFifoParityErr", + CCE_ERR_STATUS_CCE_TRGT_ASYNC_FIFO_PARITY_ERR_SMASK), +/* 4*/ FLAG_ENTRY0("CceTrgtAccessErr", + CCE_ERR_STATUS_CCE_TRGT_ACCESS_ERR_SMASK), +/* 5*/ FLAG_ENTRY0("CceRspdDataParityErr", + CCE_ERR_STATUS_CCE_RSPD_DATA_PARITY_ERR_SMASK), +/* 6*/ FLAG_ENTRY0("CceCli0AsyncFifoParityErr", + CCE_ERR_STATUS_CCE_CLI0_ASYNC_FIFO_PARITY_ERR_SMASK), +/* 7*/ FLAG_ENTRY0("CceCsrCfgBusParityErr", + CCE_ERR_STATUS_CCE_CSR_CFG_BUS_PARITY_ERR_SMASK), +/* 8*/ FLAG_ENTRY0("CceCli2AsyncFifoParityErr", + CCE_ERR_STATUS_CCE_CLI2_ASYNC_FIFO_PARITY_ERR_SMASK), +/* 9*/ FLAG_ENTRY0("CceCli1AsyncFifoPioCrdtParityErr", + CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_PIO_CRDT_PARITY_ERR_SMASK), +/*10*/ FLAG_ENTRY0("CceCli1AsyncFifoPioCrdtParityErr", + CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_SDMA_HD_PARITY_ERR_SMASK), +/*11*/ FLAG_ENTRY0("CceCli1AsyncFifoRxdmaParityError", + CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_RXDMA_PARITY_ERROR_SMASK), +/*12*/ FLAG_ENTRY0("CceCli1AsyncFifoDbgParityError", + CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_DBG_PARITY_ERROR_SMASK), +/*13*/ FLAG_ENTRY0("PcicRetryMemCorErr", + CCE_ERR_STATUS_PCIC_RETRY_MEM_COR_ERR_SMASK), +/*14*/ FLAG_ENTRY0("PcicRetryMemCorErr", + CCE_ERR_STATUS_PCIC_RETRY_SOT_MEM_COR_ERR_SMASK), +/*15*/ FLAG_ENTRY0("PcicPostHdQCorErr", + CCE_ERR_STATUS_PCIC_POST_HD_QCOR_ERR_SMASK), +/*16*/ FLAG_ENTRY0("PcicPostHdQCorErr", + CCE_ERR_STATUS_PCIC_POST_DAT_QCOR_ERR_SMASK), +/*17*/ FLAG_ENTRY0("PcicPostHdQCorErr", + CCE_ERR_STATUS_PCIC_CPL_HD_QCOR_ERR_SMASK), +/*18*/ FLAG_ENTRY0("PcicCplDatQCorErr", + CCE_ERR_STATUS_PCIC_CPL_DAT_QCOR_ERR_SMASK), +/*19*/ FLAG_ENTRY0("PcicNPostHQParityErr", + CCE_ERR_STATUS_PCIC_NPOST_HQ_PARITY_ERR_SMASK), +/*20*/ FLAG_ENTRY0("PcicNPostDatQParityErr", + CCE_ERR_STATUS_PCIC_NPOST_DAT_QPARITY_ERR_SMASK), +/*21*/ FLAG_ENTRY0("PcicRetryMemUncErr", + CCE_ERR_STATUS_PCIC_RETRY_MEM_UNC_ERR_SMASK), +/*22*/ FLAG_ENTRY0("PcicRetrySotMemUncErr", + CCE_ERR_STATUS_PCIC_RETRY_SOT_MEM_UNC_ERR_SMASK), +/*23*/ FLAG_ENTRY0("PcicPostHdQUncErr", + CCE_ERR_STATUS_PCIC_POST_HD_QUNC_ERR_SMASK), +/*24*/ FLAG_ENTRY0("PcicPostDatQUncErr", + CCE_ERR_STATUS_PCIC_POST_DAT_QUNC_ERR_SMASK), +/*25*/ FLAG_ENTRY0("PcicCplHdQUncErr", + CCE_ERR_STATUS_PCIC_CPL_HD_QUNC_ERR_SMASK), +/*26*/ FLAG_ENTRY0("PcicCplDatQUncErr", + CCE_ERR_STATUS_PCIC_CPL_DAT_QUNC_ERR_SMASK), +/*27*/ FLAG_ENTRY0("PcicTransmitFrontParityErr", + CCE_ERR_STATUS_PCIC_TRANSMIT_FRONT_PARITY_ERR_SMASK), +/*28*/ FLAG_ENTRY0("PcicTransmitBackParityErr", + CCE_ERR_STATUS_PCIC_TRANSMIT_BACK_PARITY_ERR_SMASK), +/*29*/ FLAG_ENTRY0("PcicReceiveParityErr", + CCE_ERR_STATUS_PCIC_RECEIVE_PARITY_ERR_SMASK), +/*30*/ FLAG_ENTRY0("CceTrgtCplTimeoutErr", + CCE_ERR_STATUS_CCE_TRGT_CPL_TIMEOUT_ERR_SMASK), +/*31*/ FLAG_ENTRY0("LATriggered", + CCE_ERR_STATUS_LA_TRIGGERED_SMASK), +/*32*/ FLAG_ENTRY0("CceSegReadBadAddrErr", + CCE_ERR_STATUS_CCE_SEG_READ_BAD_ADDR_ERR_SMASK), +/*33*/ FLAG_ENTRY0("CceSegWriteBadAddrErr", + CCE_ERR_STATUS_CCE_SEG_WRITE_BAD_ADDR_ERR_SMASK), +/*34*/ FLAG_ENTRY0("CceRcplAsyncFifoParityErr", + CCE_ERR_STATUS_CCE_RCPL_ASYNC_FIFO_PARITY_ERR_SMASK), +/*35*/ FLAG_ENTRY0("CceRxdmaConvFifoParityErr", + CCE_ERR_STATUS_CCE_RXDMA_CONV_FIFO_PARITY_ERR_SMASK), +/*36*/ FLAG_ENTRY0("CceMsixTableCorErr", + CCE_ERR_STATUS_CCE_MSIX_TABLE_COR_ERR_SMASK), +/*37*/ FLAG_ENTRY0("CceMsixTableUncErr", + CCE_ERR_STATUS_CCE_MSIX_TABLE_UNC_ERR_SMASK), +/*38*/ FLAG_ENTRY0("CceIntMapCorErr", + CCE_ERR_STATUS_CCE_INT_MAP_COR_ERR_SMASK), +/*39*/ FLAG_ENTRY0("CceIntMapUncErr", + CCE_ERR_STATUS_CCE_INT_MAP_UNC_ERR_SMASK), +/*40*/ FLAG_ENTRY0("CceMsixCsrParityErr", + CCE_ERR_STATUS_CCE_MSIX_CSR_PARITY_ERR_SMASK), +/*41-63 reserved*/ +}; + +/* + * Misc Error flags + */ +#define MES(text) MISC_ERR_STATUS_MISC_##text##_ERR_SMASK +static struct flag_table misc_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("CSR_PARITY", MES(CSR_PARITY)), +/* 1*/ FLAG_ENTRY0("CSR_READ_BAD_ADDR", MES(CSR_READ_BAD_ADDR)), +/* 2*/ FLAG_ENTRY0("CSR_WRITE_BAD_ADDR", MES(CSR_WRITE_BAD_ADDR)), +/* 3*/ FLAG_ENTRY0("SBUS_WRITE_FAILED", MES(SBUS_WRITE_FAILED)), +/* 4*/ FLAG_ENTRY0("KEY_MISMATCH", MES(KEY_MISMATCH)), +/* 5*/ FLAG_ENTRY0("FW_AUTH_FAILED", MES(FW_AUTH_FAILED)), +/* 6*/ FLAG_ENTRY0("EFUSE_CSR_PARITY", MES(EFUSE_CSR_PARITY)), +/* 7*/ FLAG_ENTRY0("EFUSE_READ_BAD_ADDR", MES(EFUSE_READ_BAD_ADDR)), +/* 8*/ FLAG_ENTRY0("EFUSE_WRITE", MES(EFUSE_WRITE)), +/* 9*/ FLAG_ENTRY0("EFUSE_DONE_PARITY", MES(EFUSE_DONE_PARITY)), +/*10*/ FLAG_ENTRY0("INVALID_EEP_CMD", MES(INVALID_EEP_CMD)), +/*11*/ FLAG_ENTRY0("MBIST_FAIL", MES(MBIST_FAIL)), +/*12*/ FLAG_ENTRY0("PLL_LOCK_FAIL", MES(PLL_LOCK_FAIL)) +}; + +/* + * TXE PIO Error flags and consequences + */ +static struct flag_table pio_err_status_flags[] = { +/* 0*/ FLAG_ENTRY("PioWriteBadCtxt", + SEC_WRITE_DROPPED, + SEND_PIO_ERR_STATUS_PIO_WRITE_BAD_CTXT_ERR_SMASK), +/* 1*/ FLAG_ENTRY("PioWriteAddrParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_WRITE_ADDR_PARITY_ERR_SMASK), +/* 2*/ FLAG_ENTRY("PioCsrParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_CSR_PARITY_ERR_SMASK), +/* 3*/ FLAG_ENTRY("PioSbMemFifo0", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO0_ERR_SMASK), +/* 4*/ FLAG_ENTRY("PioSbMemFifo1", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO1_ERR_SMASK), +/* 5*/ FLAG_ENTRY("PioPccFifoParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PCC_FIFO_PARITY_ERR_SMASK), +/* 6*/ FLAG_ENTRY("PioPecFifoParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PEC_FIFO_PARITY_ERR_SMASK), +/* 7*/ FLAG_ENTRY("PioSbrdctlCrrelParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_SBRDCTL_CRREL_PARITY_ERR_SMASK), +/* 8*/ FLAG_ENTRY("PioSbrdctrlCrrelFifoParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_SBRDCTRL_CRREL_FIFO_PARITY_ERR_SMASK), +/* 9*/ FLAG_ENTRY("PioPktEvictFifoParityErr", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_FIFO_PARITY_ERR_SMASK), +/*10*/ FLAG_ENTRY("PioSmPktResetParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_SM_PKT_RESET_PARITY_ERR_SMASK), +/*11*/ FLAG_ENTRY("PioVlLenMemBank0Unc", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK0_UNC_ERR_SMASK), +/*12*/ FLAG_ENTRY("PioVlLenMemBank1Unc", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK1_UNC_ERR_SMASK), +/*13*/ FLAG_ENTRY("PioVlLenMemBank0Cor", + 0, + SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK0_COR_ERR_SMASK), +/*14*/ FLAG_ENTRY("PioVlLenMemBank1Cor", + 0, + SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK1_COR_ERR_SMASK), +/*15*/ FLAG_ENTRY("PioCreditRetFifoParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_CREDIT_RET_FIFO_PARITY_ERR_SMASK), +/*16*/ FLAG_ENTRY("PioPpmcPblFifo", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PPMC_PBL_FIFO_ERR_SMASK), +/*17*/ FLAG_ENTRY("PioInitSmIn", + 0, + SEND_PIO_ERR_STATUS_PIO_INIT_SM_IN_ERR_SMASK), +/*18*/ FLAG_ENTRY("PioPktEvictSmOrArbSm", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_SM_OR_ARB_SM_ERR_SMASK), +/*19*/ FLAG_ENTRY("PioHostAddrMemUnc", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_HOST_ADDR_MEM_UNC_ERR_SMASK), +/*20*/ FLAG_ENTRY("PioHostAddrMemCor", + 0, + SEND_PIO_ERR_STATUS_PIO_HOST_ADDR_MEM_COR_ERR_SMASK), +/*21*/ FLAG_ENTRY("PioWriteDataParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_WRITE_DATA_PARITY_ERR_SMASK), +/*22*/ FLAG_ENTRY("PioStateMachine", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_STATE_MACHINE_ERR_SMASK), +/*23*/ FLAG_ENTRY("PioWriteQwValidParity", + SEC_WRITE_DROPPED|SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_WRITE_QW_VALID_PARITY_ERR_SMASK), +/*24*/ FLAG_ENTRY("PioBlockQwCountParity", + SEC_WRITE_DROPPED|SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_BLOCK_QW_COUNT_PARITY_ERR_SMASK), +/*25*/ FLAG_ENTRY("PioVlfVlLenParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_VLF_VL_LEN_PARITY_ERR_SMASK), +/*26*/ FLAG_ENTRY("PioVlfSopParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_VLF_SOP_PARITY_ERR_SMASK), +/*27*/ FLAG_ENTRY("PioVlFifoParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_VL_FIFO_PARITY_ERR_SMASK), +/*28*/ FLAG_ENTRY("PioPpmcBqcMemParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PPMC_BQC_MEM_PARITY_ERR_SMASK), +/*29*/ FLAG_ENTRY("PioPpmcSopLen", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PPMC_SOP_LEN_ERR_SMASK), +/*30-31 reserved*/ +/*32*/ FLAG_ENTRY("PioCurrentFreeCntParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_CURRENT_FREE_CNT_PARITY_ERR_SMASK), +/*33*/ FLAG_ENTRY("PioLastReturnedCntParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_LAST_RETURNED_CNT_PARITY_ERR_SMASK), +/*34*/ FLAG_ENTRY("PioPccSopHeadParity", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PCC_SOP_HEAD_PARITY_ERR_SMASK), +/*35*/ FLAG_ENTRY("PioPecSopHeadParityErr", + SEC_SPC_FREEZE, + SEND_PIO_ERR_STATUS_PIO_PEC_SOP_HEAD_PARITY_ERR_SMASK), +/*36-63 reserved*/ +}; + +/* TXE PIO errors that cause an SPC freeze */ +#define ALL_PIO_FREEZE_ERR \ + (SEND_PIO_ERR_STATUS_PIO_WRITE_ADDR_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_CSR_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO0_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO1_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PCC_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PEC_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_SBRDCTL_CRREL_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_SBRDCTRL_CRREL_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_SM_PKT_RESET_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK0_UNC_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK1_UNC_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_CREDIT_RET_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PPMC_PBL_FIFO_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_SM_OR_ARB_SM_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_HOST_ADDR_MEM_UNC_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_WRITE_DATA_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_STATE_MACHINE_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_WRITE_QW_VALID_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_BLOCK_QW_COUNT_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_VLF_VL_LEN_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_VLF_SOP_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_VL_FIFO_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PPMC_BQC_MEM_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PPMC_SOP_LEN_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_CURRENT_FREE_CNT_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_LAST_RETURNED_CNT_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PCC_SOP_HEAD_PARITY_ERR_SMASK \ + | SEND_PIO_ERR_STATUS_PIO_PEC_SOP_HEAD_PARITY_ERR_SMASK) + +/* + * TXE SDMA Error flags + */ +static struct flag_table sdma_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("SDmaRpyTagErr", + SEND_DMA_ERR_STATUS_SDMA_RPY_TAG_ERR_SMASK), +/* 1*/ FLAG_ENTRY0("SDmaCsrParityErr", + SEND_DMA_ERR_STATUS_SDMA_CSR_PARITY_ERR_SMASK), +/* 2*/ FLAG_ENTRY0("SDmaPcieReqTrackingUncErr", + SEND_DMA_ERR_STATUS_SDMA_PCIE_REQ_TRACKING_UNC_ERR_SMASK), +/* 3*/ FLAG_ENTRY0("SDmaPcieReqTrackingCorErr", + SEND_DMA_ERR_STATUS_SDMA_PCIE_REQ_TRACKING_COR_ERR_SMASK), +/*04-63 reserved*/ +}; + +/* TXE SDMA errors that cause an SPC freeze */ +#define ALL_SDMA_FREEZE_ERR \ + (SEND_DMA_ERR_STATUS_SDMA_RPY_TAG_ERR_SMASK \ + | SEND_DMA_ERR_STATUS_SDMA_CSR_PARITY_ERR_SMASK \ + | SEND_DMA_ERR_STATUS_SDMA_PCIE_REQ_TRACKING_UNC_ERR_SMASK) + +/* + * TXE Egress Error flags + */ +#define SEES(text) SEND_EGRESS_ERR_STATUS_##text##_ERR_SMASK +static struct flag_table egress_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("TxPktIntegrityMemCorErr", SEES(TX_PKT_INTEGRITY_MEM_COR)), +/* 1*/ FLAG_ENTRY0("TxPktIntegrityMemUncErr", SEES(TX_PKT_INTEGRITY_MEM_UNC)), +/* 2 reserved */ +/* 3*/ FLAG_ENTRY0("TxEgressFifoUnderrunOrParityErr", + SEES(TX_EGRESS_FIFO_UNDERRUN_OR_PARITY)), +/* 4*/ FLAG_ENTRY0("TxLinkdownErr", SEES(TX_LINKDOWN)), +/* 5*/ FLAG_ENTRY0("TxIncorrectLinkStateErr", SEES(TX_INCORRECT_LINK_STATE)), +/* 6 reserved */ +/* 7*/ FLAG_ENTRY0("TxPioLaunchIntfParityErr", + SEES(TX_PIO_LAUNCH_INTF_PARITY)), +/* 8*/ FLAG_ENTRY0("TxSdmaLaunchIntfParityErr", + SEES(TX_SDMA_LAUNCH_INTF_PARITY)), +/* 9-10 reserved */ +/*11*/ FLAG_ENTRY0("TxSbrdCtlStateMachineParityErr", + SEES(TX_SBRD_CTL_STATE_MACHINE_PARITY)), +/*12*/ FLAG_ENTRY0("TxIllegalVLErr", SEES(TX_ILLEGAL_VL)), +/*13*/ FLAG_ENTRY0("TxLaunchCsrParityErr", SEES(TX_LAUNCH_CSR_PARITY)), +/*14*/ FLAG_ENTRY0("TxSbrdCtlCsrParityErr", SEES(TX_SBRD_CTL_CSR_PARITY)), +/*15*/ FLAG_ENTRY0("TxConfigParityErr", SEES(TX_CONFIG_PARITY)), +/*16*/ FLAG_ENTRY0("TxSdma0DisallowedPacketErr", + SEES(TX_SDMA0_DISALLOWED_PACKET)), +/*17*/ FLAG_ENTRY0("TxSdma1DisallowedPacketErr", + SEES(TX_SDMA1_DISALLOWED_PACKET)), +/*18*/ FLAG_ENTRY0("TxSdma2DisallowedPacketErr", + SEES(TX_SDMA2_DISALLOWED_PACKET)), +/*19*/ FLAG_ENTRY0("TxSdma3DisallowedPacketErr", + SEES(TX_SDMA3_DISALLOWED_PACKET)), +/*20*/ FLAG_ENTRY0("TxSdma4DisallowedPacketErr", + SEES(TX_SDMA4_DISALLOWED_PACKET)), +/*21*/ FLAG_ENTRY0("TxSdma5DisallowedPacketErr", + SEES(TX_SDMA5_DISALLOWED_PACKET)), +/*22*/ FLAG_ENTRY0("TxSdma6DisallowedPacketErr", + SEES(TX_SDMA6_DISALLOWED_PACKET)), +/*23*/ FLAG_ENTRY0("TxSdma7DisallowedPacketErr", + SEES(TX_SDMA7_DISALLOWED_PACKET)), +/*24*/ FLAG_ENTRY0("TxSdma8DisallowedPacketErr", + SEES(TX_SDMA8_DISALLOWED_PACKET)), +/*25*/ FLAG_ENTRY0("TxSdma9DisallowedPacketErr", + SEES(TX_SDMA9_DISALLOWED_PACKET)), +/*26*/ FLAG_ENTRY0("TxSdma10DisallowedPacketErr", + SEES(TX_SDMA10_DISALLOWED_PACKET)), +/*27*/ FLAG_ENTRY0("TxSdma11DisallowedPacketErr", + SEES(TX_SDMA11_DISALLOWED_PACKET)), +/*28*/ FLAG_ENTRY0("TxSdma12DisallowedPacketErr", + SEES(TX_SDMA12_DISALLOWED_PACKET)), +/*29*/ FLAG_ENTRY0("TxSdma13DisallowedPacketErr", + SEES(TX_SDMA13_DISALLOWED_PACKET)), +/*30*/ FLAG_ENTRY0("TxSdma14DisallowedPacketErr", + SEES(TX_SDMA14_DISALLOWED_PACKET)), +/*31*/ FLAG_ENTRY0("TxSdma15DisallowedPacketErr", + SEES(TX_SDMA15_DISALLOWED_PACKET)), +/*32*/ FLAG_ENTRY0("TxLaunchFifo0UncOrParityErr", + SEES(TX_LAUNCH_FIFO0_UNC_OR_PARITY)), +/*33*/ FLAG_ENTRY0("TxLaunchFifo1UncOrParityErr", + SEES(TX_LAUNCH_FIFO1_UNC_OR_PARITY)), +/*34*/ FLAG_ENTRY0("TxLaunchFifo2UncOrParityErr", + SEES(TX_LAUNCH_FIFO2_UNC_OR_PARITY)), +/*35*/ FLAG_ENTRY0("TxLaunchFifo3UncOrParityErr", + SEES(TX_LAUNCH_FIFO3_UNC_OR_PARITY)), +/*36*/ FLAG_ENTRY0("TxLaunchFifo4UncOrParityErr", + SEES(TX_LAUNCH_FIFO4_UNC_OR_PARITY)), +/*37*/ FLAG_ENTRY0("TxLaunchFifo5UncOrParityErr", + SEES(TX_LAUNCH_FIFO5_UNC_OR_PARITY)), +/*38*/ FLAG_ENTRY0("TxLaunchFifo6UncOrParityErr", + SEES(TX_LAUNCH_FIFO6_UNC_OR_PARITY)), +/*39*/ FLAG_ENTRY0("TxLaunchFifo7UncOrParityErr", + SEES(TX_LAUNCH_FIFO7_UNC_OR_PARITY)), +/*40*/ FLAG_ENTRY0("TxLaunchFifo8UncOrParityErr", + SEES(TX_LAUNCH_FIFO8_UNC_OR_PARITY)), +/*41*/ FLAG_ENTRY0("TxCreditReturnParityErr", SEES(TX_CREDIT_RETURN_PARITY)), +/*42*/ FLAG_ENTRY0("TxSbHdrUncErr", SEES(TX_SB_HDR_UNC)), +/*43*/ FLAG_ENTRY0("TxReadSdmaMemoryUncErr", SEES(TX_READ_SDMA_MEMORY_UNC)), +/*44*/ FLAG_ENTRY0("TxReadPioMemoryUncErr", SEES(TX_READ_PIO_MEMORY_UNC)), +/*45*/ FLAG_ENTRY0("TxEgressFifoUncErr", SEES(TX_EGRESS_FIFO_UNC)), +/*46*/ FLAG_ENTRY0("TxHcrcInsertionErr", SEES(TX_HCRC_INSERTION)), +/*47*/ FLAG_ENTRY0("TxCreditReturnVLErr", SEES(TX_CREDIT_RETURN_VL)), +/*48*/ FLAG_ENTRY0("TxLaunchFifo0CorErr", SEES(TX_LAUNCH_FIFO0_COR)), +/*49*/ FLAG_ENTRY0("TxLaunchFifo1CorErr", SEES(TX_LAUNCH_FIFO1_COR)), +/*50*/ FLAG_ENTRY0("TxLaunchFifo2CorErr", SEES(TX_LAUNCH_FIFO2_COR)), +/*51*/ FLAG_ENTRY0("TxLaunchFifo3CorErr", SEES(TX_LAUNCH_FIFO3_COR)), +/*52*/ FLAG_ENTRY0("TxLaunchFifo4CorErr", SEES(TX_LAUNCH_FIFO4_COR)), +/*53*/ FLAG_ENTRY0("TxLaunchFifo5CorErr", SEES(TX_LAUNCH_FIFO5_COR)), +/*54*/ FLAG_ENTRY0("TxLaunchFifo6CorErr", SEES(TX_LAUNCH_FIFO6_COR)), +/*55*/ FLAG_ENTRY0("TxLaunchFifo7CorErr", SEES(TX_LAUNCH_FIFO7_COR)), +/*56*/ FLAG_ENTRY0("TxLaunchFifo8CorErr", SEES(TX_LAUNCH_FIFO8_COR)), +/*57*/ FLAG_ENTRY0("TxCreditOverrunErr", SEES(TX_CREDIT_OVERRUN)), +/*58*/ FLAG_ENTRY0("TxSbHdrCorErr", SEES(TX_SB_HDR_COR)), +/*59*/ FLAG_ENTRY0("TxReadSdmaMemoryCorErr", SEES(TX_READ_SDMA_MEMORY_COR)), +/*60*/ FLAG_ENTRY0("TxReadPioMemoryCorErr", SEES(TX_READ_PIO_MEMORY_COR)), +/*61*/ FLAG_ENTRY0("TxEgressFifoCorErr", SEES(TX_EGRESS_FIFO_COR)), +/*62*/ FLAG_ENTRY0("TxReadSdmaMemoryCsrUncErr", + SEES(TX_READ_SDMA_MEMORY_CSR_UNC)), +/*63*/ FLAG_ENTRY0("TxReadPioMemoryCsrUncErr", + SEES(TX_READ_PIO_MEMORY_CSR_UNC)), +}; + +/* + * TXE Egress Error Info flags + */ +#define SEEI(text) SEND_EGRESS_ERR_INFO_##text##_ERR_SMASK +static struct flag_table egress_err_info_flags[] = { +/* 0*/ FLAG_ENTRY0("Reserved", 0ull), +/* 1*/ FLAG_ENTRY0("VLErr", SEEI(VL)), +/* 2*/ FLAG_ENTRY0("JobKeyErr", SEEI(JOB_KEY)), +/* 3*/ FLAG_ENTRY0("JobKeyErr", SEEI(JOB_KEY)), +/* 4*/ FLAG_ENTRY0("PartitionKeyErr", SEEI(PARTITION_KEY)), +/* 5*/ FLAG_ENTRY0("SLIDErr", SEEI(SLID)), +/* 6*/ FLAG_ENTRY0("OpcodeErr", SEEI(OPCODE)), +/* 7*/ FLAG_ENTRY0("VLMappingErr", SEEI(VL_MAPPING)), +/* 8*/ FLAG_ENTRY0("RawErr", SEEI(RAW)), +/* 9*/ FLAG_ENTRY0("RawIPv6Err", SEEI(RAW_IPV6)), +/*10*/ FLAG_ENTRY0("GRHErr", SEEI(GRH)), +/*11*/ FLAG_ENTRY0("BypassErr", SEEI(BYPASS)), +/*12*/ FLAG_ENTRY0("KDETHPacketsErr", SEEI(KDETH_PACKETS)), +/*13*/ FLAG_ENTRY0("NonKDETHPacketsErr", SEEI(NON_KDETH_PACKETS)), +/*14*/ FLAG_ENTRY0("TooSmallIBPacketsErr", SEEI(TOO_SMALL_IB_PACKETS)), +/*15*/ FLAG_ENTRY0("TooSmallBypassPacketsErr", SEEI(TOO_SMALL_BYPASS_PACKETS)), +/*16*/ FLAG_ENTRY0("PbcTestErr", SEEI(PBC_TEST)), +/*17*/ FLAG_ENTRY0("BadPktLenErr", SEEI(BAD_PKT_LEN)), +/*18*/ FLAG_ENTRY0("TooLongIBPacketErr", SEEI(TOO_LONG_IB_PACKET)), +/*19*/ FLAG_ENTRY0("TooLongBypassPacketsErr", SEEI(TOO_LONG_BYPASS_PACKETS)), +/*20*/ FLAG_ENTRY0("PbcStaticRateControlErr", SEEI(PBC_STATIC_RATE_CONTROL)), +/*21*/ FLAG_ENTRY0("BypassBadPktLenErr", SEEI(BAD_PKT_LEN)), +}; + +/* TXE Egress errors that cause an SPC freeze */ +#define ALL_TXE_EGRESS_FREEZE_ERR \ + (SEES(TX_EGRESS_FIFO_UNDERRUN_OR_PARITY) \ + | SEES(TX_PIO_LAUNCH_INTF_PARITY) \ + | SEES(TX_SDMA_LAUNCH_INTF_PARITY) \ + | SEES(TX_SBRD_CTL_STATE_MACHINE_PARITY) \ + | SEES(TX_LAUNCH_CSR_PARITY) \ + | SEES(TX_SBRD_CTL_CSR_PARITY) \ + | SEES(TX_CONFIG_PARITY) \ + | SEES(TX_LAUNCH_FIFO0_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO1_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO2_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO3_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO4_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO5_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO6_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO7_UNC_OR_PARITY) \ + | SEES(TX_LAUNCH_FIFO8_UNC_OR_PARITY) \ + | SEES(TX_CREDIT_RETURN_PARITY)) + +/* + * TXE Send error flags + */ +#define SES(name) SEND_ERR_STATUS_SEND_##name##_ERR_SMASK +static struct flag_table send_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("SDmaRpyTagErr", SES(CSR_PARITY)), +/* 1*/ FLAG_ENTRY0("SendCsrReadBadAddrErr", SES(CSR_READ_BAD_ADDR)), +/* 2*/ FLAG_ENTRY0("SendCsrWriteBadAddrErr", SES(CSR_WRITE_BAD_ADDR)) +}; + +/* + * TXE Send Context Error flags and consequences + */ +static struct flag_table sc_err_status_flags[] = { +/* 0*/ FLAG_ENTRY("InconsistentSop", + SEC_PACKET_DROPPED | SEC_SC_HALTED, + SEND_CTXT_ERR_STATUS_PIO_INCONSISTENT_SOP_ERR_SMASK), +/* 1*/ FLAG_ENTRY("DisallowedPacket", + SEC_PACKET_DROPPED | SEC_SC_HALTED, + SEND_CTXT_ERR_STATUS_PIO_DISALLOWED_PACKET_ERR_SMASK), +/* 2*/ FLAG_ENTRY("WriteCrossesBoundary", + SEC_WRITE_DROPPED | SEC_SC_HALTED, + SEND_CTXT_ERR_STATUS_PIO_WRITE_CROSSES_BOUNDARY_ERR_SMASK), +/* 3*/ FLAG_ENTRY("WriteOverflow", + SEC_WRITE_DROPPED | SEC_SC_HALTED, + SEND_CTXT_ERR_STATUS_PIO_WRITE_OVERFLOW_ERR_SMASK), +/* 4*/ FLAG_ENTRY("WriteOutOfBounds", + SEC_WRITE_DROPPED | SEC_SC_HALTED, + SEND_CTXT_ERR_STATUS_PIO_WRITE_OUT_OF_BOUNDS_ERR_SMASK), +/* 5-63 reserved*/ +}; + +/* + * RXE Receive Error flags + */ +#define RXES(name) RCV_ERR_STATUS_RX_##name##_ERR_SMASK +static struct flag_table rxe_err_status_flags[] = { +/* 0*/ FLAG_ENTRY0("RxDmaCsrCorErr", RXES(DMA_CSR_COR)), +/* 1*/ FLAG_ENTRY0("RxDcIntfParityErr", RXES(DC_INTF_PARITY)), +/* 2*/ FLAG_ENTRY0("RxRcvHdrUncErr", RXES(RCV_HDR_UNC)), +/* 3*/ FLAG_ENTRY0("RxRcvHdrCorErr", RXES(RCV_HDR_COR)), +/* 4*/ FLAG_ENTRY0("RxRcvDataUncErr", RXES(RCV_DATA_UNC)), +/* 5*/ FLAG_ENTRY0("RxRcvDataCorErr", RXES(RCV_DATA_COR)), +/* 6*/ FLAG_ENTRY0("RxRcvQpMapTableUncErr", RXES(RCV_QP_MAP_TABLE_UNC)), +/* 7*/ FLAG_ENTRY0("RxRcvQpMapTableCorErr", RXES(RCV_QP_MAP_TABLE_COR)), +/* 8*/ FLAG_ENTRY0("RxRcvCsrParityErr", RXES(RCV_CSR_PARITY)), +/* 9*/ FLAG_ENTRY0("RxDcSopEopParityErr", RXES(DC_SOP_EOP_PARITY)), +/*10*/ FLAG_ENTRY0("RxDmaFlagUncErr", RXES(DMA_FLAG_UNC)), +/*11*/ FLAG_ENTRY0("RxDmaFlagCorErr", RXES(DMA_FLAG_COR)), +/*12*/ FLAG_ENTRY0("RxRcvFsmEncodingErr", RXES(RCV_FSM_ENCODING)), +/*13*/ FLAG_ENTRY0("RxRbufFreeListUncErr", RXES(RBUF_FREE_LIST_UNC)), +/*14*/ FLAG_ENTRY0("RxRbufFreeListCorErr", RXES(RBUF_FREE_LIST_COR)), +/*15*/ FLAG_ENTRY0("RxRbufLookupDesRegUncErr", RXES(RBUF_LOOKUP_DES_REG_UNC)), +/*16*/ FLAG_ENTRY0("RxRbufLookupDesRegUncCorErr", + RXES(RBUF_LOOKUP_DES_REG_UNC_COR)), +/*17*/ FLAG_ENTRY0("RxRbufLookupDesUncErr", RXES(RBUF_LOOKUP_DES_UNC)), +/*18*/ FLAG_ENTRY0("RxRbufLookupDesCorErr", RXES(RBUF_LOOKUP_DES_COR)), +/*19*/ FLAG_ENTRY0("RxRbufBlockListReadUncErr", + RXES(RBUF_BLOCK_LIST_READ_UNC)), +/*20*/ FLAG_ENTRY0("RxRbufBlockListReadCorErr", + RXES(RBUF_BLOCK_LIST_READ_COR)), +/*21*/ FLAG_ENTRY0("RxRbufCsrQHeadBufNumParityErr", + RXES(RBUF_CSR_QHEAD_BUF_NUM_PARITY)), +/*22*/ FLAG_ENTRY0("RxRbufCsrQEntCntParityErr", + RXES(RBUF_CSR_QENT_CNT_PARITY)), +/*23*/ FLAG_ENTRY0("RxRbufCsrQNextBufParityErr", + RXES(RBUF_CSR_QNEXT_BUF_PARITY)), +/*24*/ FLAG_ENTRY0("RxRbufCsrQVldBitParityErr", + RXES(RBUF_CSR_QVLD_BIT_PARITY)), +/*25*/ FLAG_ENTRY0("RxRbufCsrQHdPtrParityErr", RXES(RBUF_CSR_QHD_PTR_PARITY)), +/*26*/ FLAG_ENTRY0("RxRbufCsrQTlPtrParityErr", RXES(RBUF_CSR_QTL_PTR_PARITY)), +/*27*/ FLAG_ENTRY0("RxRbufCsrQNumOfPktParityErr", + RXES(RBUF_CSR_QNUM_OF_PKT_PARITY)), +/*28*/ FLAG_ENTRY0("RxRbufCsrQEOPDWParityErr", RXES(RBUF_CSR_QEOPDW_PARITY)), +/*29*/ FLAG_ENTRY0("RxRbufCtxIdParityErr", RXES(RBUF_CTX_ID_PARITY)), +/*30*/ FLAG_ENTRY0("RxRBufBadLookupErr", RXES(RBUF_BAD_LOOKUP)), +/*31*/ FLAG_ENTRY0("RxRbufFullErr", RXES(RBUF_FULL)), +/*32*/ FLAG_ENTRY0("RxRbufEmptyErr", RXES(RBUF_EMPTY)), +/*33*/ FLAG_ENTRY0("RxRbufFlRdAddrParityErr", RXES(RBUF_FL_RD_ADDR_PARITY)), +/*34*/ FLAG_ENTRY0("RxRbufFlWrAddrParityErr", RXES(RBUF_FL_WR_ADDR_PARITY)), +/*35*/ FLAG_ENTRY0("RxRbufFlInitdoneParityErr", + RXES(RBUF_FL_INITDONE_PARITY)), +/*36*/ FLAG_ENTRY0("RxRbufFlInitWrAddrParityErr", + RXES(RBUF_FL_INIT_WR_ADDR_PARITY)), +/*37*/ FLAG_ENTRY0("RxRbufNextFreeBufUncErr", RXES(RBUF_NEXT_FREE_BUF_UNC)), +/*38*/ FLAG_ENTRY0("RxRbufNextFreeBufCorErr", RXES(RBUF_NEXT_FREE_BUF_COR)), +/*39*/ FLAG_ENTRY0("RxLookupDesPart1UncErr", RXES(LOOKUP_DES_PART1_UNC)), +/*40*/ FLAG_ENTRY0("RxLookupDesPart1UncCorErr", + RXES(LOOKUP_DES_PART1_UNC_COR)), +/*41*/ FLAG_ENTRY0("RxLookupDesPart2ParityErr", + RXES(LOOKUP_DES_PART2_PARITY)), +/*42*/ FLAG_ENTRY0("RxLookupRcvArrayUncErr", RXES(LOOKUP_RCV_ARRAY_UNC)), +/*43*/ FLAG_ENTRY0("RxLookupRcvArrayCorErr", RXES(LOOKUP_RCV_ARRAY_COR)), +/*44*/ FLAG_ENTRY0("RxLookupCsrParityErr", RXES(LOOKUP_CSR_PARITY)), +/*45*/ FLAG_ENTRY0("RxHqIntrCsrParityErr", RXES(HQ_INTR_CSR_PARITY)), +/*46*/ FLAG_ENTRY0("RxHqIntrFsmErr", RXES(HQ_INTR_FSM)), +/*47*/ FLAG_ENTRY0("RxRbufDescPart1UncErr", RXES(RBUF_DESC_PART1_UNC)), +/*48*/ FLAG_ENTRY0("RxRbufDescPart1CorErr", RXES(RBUF_DESC_PART1_COR)), +/*49*/ FLAG_ENTRY0("RxRbufDescPart2UncErr", RXES(RBUF_DESC_PART2_UNC)), +/*50*/ FLAG_ENTRY0("RxRbufDescPart2CorErr", RXES(RBUF_DESC_PART2_COR)), +/*51*/ FLAG_ENTRY0("RxDmaHdrFifoRdUncErr", RXES(DMA_HDR_FIFO_RD_UNC)), +/*52*/ FLAG_ENTRY0("RxDmaHdrFifoRdCorErr", RXES(DMA_HDR_FIFO_RD_COR)), +/*53*/ FLAG_ENTRY0("RxDmaDataFifoRdUncErr", RXES(DMA_DATA_FIFO_RD_UNC)), +/*54*/ FLAG_ENTRY0("RxDmaDataFifoRdCorErr", RXES(DMA_DATA_FIFO_RD_COR)), +/*55*/ FLAG_ENTRY0("RxRbufDataUncErr", RXES(RBUF_DATA_UNC)), +/*56*/ FLAG_ENTRY0("RxRbufDataCorErr", RXES(RBUF_DATA_COR)), +/*57*/ FLAG_ENTRY0("RxDmaCsrParityErr", RXES(DMA_CSR_PARITY)), +/*58*/ FLAG_ENTRY0("RxDmaEqFsmEncodingErr", RXES(DMA_EQ_FSM_ENCODING)), +/*59*/ FLAG_ENTRY0("RxDmaDqFsmEncodingErr", RXES(DMA_DQ_FSM_ENCODING)), +/*60*/ FLAG_ENTRY0("RxDmaCsrUncErr", RXES(DMA_CSR_UNC)), +/*61*/ FLAG_ENTRY0("RxCsrReadBadAddrErr", RXES(CSR_READ_BAD_ADDR)), +/*62*/ FLAG_ENTRY0("RxCsrWriteBadAddrErr", RXES(CSR_WRITE_BAD_ADDR)), +/*63*/ FLAG_ENTRY0("RxCsrParityErr", RXES(CSR_PARITY)) +}; + +/* RXE errors that will trigger an SPC freeze */ +#define ALL_RXE_FREEZE_ERR \ + (RCV_ERR_STATUS_RX_RCV_QP_MAP_TABLE_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RCV_CSR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_FLAG_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RCV_FSM_ENCODING_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FREE_LIST_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_REG_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_REG_UNC_COR_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_BLOCK_LIST_READ_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QHEAD_BUF_NUM_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QENT_CNT_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QNEXT_BUF_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QVLD_BIT_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QHD_PTR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QTL_PTR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QNUM_OF_PKT_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CSR_QEOPDW_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_CTX_ID_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_BAD_LOOKUP_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FULL_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_EMPTY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FL_RD_ADDR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FL_WR_ADDR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FL_INITDONE_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_FL_INIT_WR_ADDR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_NEXT_FREE_BUF_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_LOOKUP_DES_PART1_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_LOOKUP_DES_PART1_UNC_COR_ERR_SMASK \ + | RCV_ERR_STATUS_RX_LOOKUP_DES_PART2_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_LOOKUP_RCV_ARRAY_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_LOOKUP_CSR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_HQ_INTR_CSR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_HQ_INTR_FSM_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_DESC_PART1_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_DESC_PART1_COR_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_DESC_PART2_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_HDR_FIFO_RD_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_DATA_FIFO_RD_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_RBUF_DATA_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_CSR_PARITY_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_EQ_FSM_ENCODING_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_DQ_FSM_ENCODING_ERR_SMASK \ + | RCV_ERR_STATUS_RX_DMA_CSR_UNC_ERR_SMASK \ + | RCV_ERR_STATUS_RX_CSR_PARITY_ERR_SMASK) + +#define RXE_FREEZE_ABORT_MASK \ + (RCV_ERR_STATUS_RX_DMA_CSR_UNC_ERR_SMASK | \ + RCV_ERR_STATUS_RX_DMA_HDR_FIFO_RD_UNC_ERR_SMASK | \ + RCV_ERR_STATUS_RX_DMA_DATA_FIFO_RD_UNC_ERR_SMASK) + +/* + * DCC Error Flags + */ +#define DCCE(name) DCC_ERR_FLG_##name##_SMASK +static struct flag_table dcc_err_flags[] = { + FLAG_ENTRY0("bad_l2_err", DCCE(BAD_L2_ERR)), + FLAG_ENTRY0("bad_sc_err", DCCE(BAD_SC_ERR)), + FLAG_ENTRY0("bad_mid_tail_err", DCCE(BAD_MID_TAIL_ERR)), + FLAG_ENTRY0("bad_preemption_err", DCCE(BAD_PREEMPTION_ERR)), + FLAG_ENTRY0("preemption_err", DCCE(PREEMPTION_ERR)), + FLAG_ENTRY0("preemptionvl15_err", DCCE(PREEMPTIONVL15_ERR)), + FLAG_ENTRY0("bad_vl_marker_err", DCCE(BAD_VL_MARKER_ERR)), + FLAG_ENTRY0("bad_dlid_target_err", DCCE(BAD_DLID_TARGET_ERR)), + FLAG_ENTRY0("bad_lver_err", DCCE(BAD_LVER_ERR)), + FLAG_ENTRY0("uncorrectable_err", DCCE(UNCORRECTABLE_ERR)), + FLAG_ENTRY0("bad_crdt_ack_err", DCCE(BAD_CRDT_ACK_ERR)), + FLAG_ENTRY0("unsup_pkt_type", DCCE(UNSUP_PKT_TYPE)), + FLAG_ENTRY0("bad_ctrl_flit_err", DCCE(BAD_CTRL_FLIT_ERR)), + FLAG_ENTRY0("event_cntr_parity_err", DCCE(EVENT_CNTR_PARITY_ERR)), + FLAG_ENTRY0("event_cntr_rollover_err", DCCE(EVENT_CNTR_ROLLOVER_ERR)), + FLAG_ENTRY0("link_err", DCCE(LINK_ERR)), + FLAG_ENTRY0("misc_cntr_rollover_err", DCCE(MISC_CNTR_ROLLOVER_ERR)), + FLAG_ENTRY0("bad_ctrl_dist_err", DCCE(BAD_CTRL_DIST_ERR)), + FLAG_ENTRY0("bad_tail_dist_err", DCCE(BAD_TAIL_DIST_ERR)), + FLAG_ENTRY0("bad_head_dist_err", DCCE(BAD_HEAD_DIST_ERR)), + FLAG_ENTRY0("nonvl15_state_err", DCCE(NONVL15_STATE_ERR)), + FLAG_ENTRY0("vl15_multi_err", DCCE(VL15_MULTI_ERR)), + FLAG_ENTRY0("bad_pkt_length_err", DCCE(BAD_PKT_LENGTH_ERR)), + FLAG_ENTRY0("unsup_vl_err", DCCE(UNSUP_VL_ERR)), + FLAG_ENTRY0("perm_nvl15_err", DCCE(PERM_NVL15_ERR)), + FLAG_ENTRY0("slid_zero_err", DCCE(SLID_ZERO_ERR)), + FLAG_ENTRY0("dlid_zero_err", DCCE(DLID_ZERO_ERR)), + FLAG_ENTRY0("length_mtu_err", DCCE(LENGTH_MTU_ERR)), + FLAG_ENTRY0("rx_early_drop_err", DCCE(RX_EARLY_DROP_ERR)), + FLAG_ENTRY0("late_short_err", DCCE(LATE_SHORT_ERR)), + FLAG_ENTRY0("late_long_err", DCCE(LATE_LONG_ERR)), + FLAG_ENTRY0("late_ebp_err", DCCE(LATE_EBP_ERR)), + FLAG_ENTRY0("fpe_tx_fifo_ovflw_err", DCCE(FPE_TX_FIFO_OVFLW_ERR)), + FLAG_ENTRY0("fpe_tx_fifo_unflw_err", DCCE(FPE_TX_FIFO_UNFLW_ERR)), + FLAG_ENTRY0("csr_access_blocked_host", DCCE(CSR_ACCESS_BLOCKED_HOST)), + FLAG_ENTRY0("csr_access_blocked_uc", DCCE(CSR_ACCESS_BLOCKED_UC)), + FLAG_ENTRY0("tx_ctrl_parity_err", DCCE(TX_CTRL_PARITY_ERR)), + FLAG_ENTRY0("tx_ctrl_parity_mbe_err", DCCE(TX_CTRL_PARITY_MBE_ERR)), + FLAG_ENTRY0("tx_sc_parity_err", DCCE(TX_SC_PARITY_ERR)), + FLAG_ENTRY0("rx_ctrl_parity_mbe_err", DCCE(RX_CTRL_PARITY_MBE_ERR)), + FLAG_ENTRY0("csr_parity_err", DCCE(CSR_PARITY_ERR)), + FLAG_ENTRY0("csr_inval_addr", DCCE(CSR_INVAL_ADDR)), + FLAG_ENTRY0("tx_byte_shft_parity_err", DCCE(TX_BYTE_SHFT_PARITY_ERR)), + FLAG_ENTRY0("rx_byte_shft_parity_err", DCCE(RX_BYTE_SHFT_PARITY_ERR)), + FLAG_ENTRY0("fmconfig_err", DCCE(FMCONFIG_ERR)), + FLAG_ENTRY0("rcvport_err", DCCE(RCVPORT_ERR)), +}; + +/* + * LCB error flags + */ +#define LCBE(name) DC_LCB_ERR_FLG_##name##_SMASK +static struct flag_table lcb_err_flags[] = { +/* 0*/ FLAG_ENTRY0("CSR_PARITY_ERR", LCBE(CSR_PARITY_ERR)), +/* 1*/ FLAG_ENTRY0("INVALID_CSR_ADDR", LCBE(INVALID_CSR_ADDR)), +/* 2*/ FLAG_ENTRY0("RST_FOR_FAILED_DESKEW", LCBE(RST_FOR_FAILED_DESKEW)), +/* 3*/ FLAG_ENTRY0("ALL_LNS_FAILED_REINIT_TEST", + LCBE(ALL_LNS_FAILED_REINIT_TEST)), +/* 4*/ FLAG_ENTRY0("LOST_REINIT_STALL_OR_TOS", LCBE(LOST_REINIT_STALL_OR_TOS)), +/* 5*/ FLAG_ENTRY0("TX_LESS_THAN_FOUR_LNS", LCBE(TX_LESS_THAN_FOUR_LNS)), +/* 6*/ FLAG_ENTRY0("RX_LESS_THAN_FOUR_LNS", LCBE(RX_LESS_THAN_FOUR_LNS)), +/* 7*/ FLAG_ENTRY0("SEQ_CRC_ERR", LCBE(SEQ_CRC_ERR)), +/* 8*/ FLAG_ENTRY0("REINIT_FROM_PEER", LCBE(REINIT_FROM_PEER)), +/* 9*/ FLAG_ENTRY0("REINIT_FOR_LN_DEGRADE", LCBE(REINIT_FOR_LN_DEGRADE)), +/*10*/ FLAG_ENTRY0("CRC_ERR_CNT_HIT_LIMIT", LCBE(CRC_ERR_CNT_HIT_LIMIT)), +/*11*/ FLAG_ENTRY0("RCLK_STOPPED", LCBE(RCLK_STOPPED)), +/*12*/ FLAG_ENTRY0("UNEXPECTED_REPLAY_MARKER", LCBE(UNEXPECTED_REPLAY_MARKER)), +/*13*/ FLAG_ENTRY0("UNEXPECTED_ROUND_TRIP_MARKER", + LCBE(UNEXPECTED_ROUND_TRIP_MARKER)), +/*14*/ FLAG_ENTRY0("ILLEGAL_NULL_LTP", LCBE(ILLEGAL_NULL_LTP)), +/*15*/ FLAG_ENTRY0("ILLEGAL_FLIT_ENCODING", LCBE(ILLEGAL_FLIT_ENCODING)), +/*16*/ FLAG_ENTRY0("FLIT_INPUT_BUF_OFLW", LCBE(FLIT_INPUT_BUF_OFLW)), +/*17*/ FLAG_ENTRY0("VL_ACK_INPUT_BUF_OFLW", LCBE(VL_ACK_INPUT_BUF_OFLW)), +/*18*/ FLAG_ENTRY0("VL_ACK_INPUT_PARITY_ERR", LCBE(VL_ACK_INPUT_PARITY_ERR)), +/*19*/ FLAG_ENTRY0("VL_ACK_INPUT_WRONG_CRC_MODE", + LCBE(VL_ACK_INPUT_WRONG_CRC_MODE)), +/*20*/ FLAG_ENTRY0("FLIT_INPUT_BUF_MBE", LCBE(FLIT_INPUT_BUF_MBE)), +/*21*/ FLAG_ENTRY0("FLIT_INPUT_BUF_SBE", LCBE(FLIT_INPUT_BUF_SBE)), +/*22*/ FLAG_ENTRY0("REPLAY_BUF_MBE", LCBE(REPLAY_BUF_MBE)), +/*23*/ FLAG_ENTRY0("REPLAY_BUF_SBE", LCBE(REPLAY_BUF_SBE)), +/*24*/ FLAG_ENTRY0("CREDIT_RETURN_FLIT_MBE", LCBE(CREDIT_RETURN_FLIT_MBE)), +/*25*/ FLAG_ENTRY0("RST_FOR_LINK_TIMEOUT", LCBE(RST_FOR_LINK_TIMEOUT)), +/*26*/ FLAG_ENTRY0("RST_FOR_INCOMPLT_RND_TRIP", + LCBE(RST_FOR_INCOMPLT_RND_TRIP)), +/*27*/ FLAG_ENTRY0("HOLD_REINIT", LCBE(HOLD_REINIT)), +/*28*/ FLAG_ENTRY0("NEG_EDGE_LINK_TRANSFER_ACTIVE", + LCBE(NEG_EDGE_LINK_TRANSFER_ACTIVE)), +/*29*/ FLAG_ENTRY0("REDUNDANT_FLIT_PARITY_ERR", + LCBE(REDUNDANT_FLIT_PARITY_ERR)) +}; + +/* + * DC8051 Error Flags + */ +#define D8E(name) DC_DC8051_ERR_FLG_##name##_SMASK +static struct flag_table dc8051_err_flags[] = { + FLAG_ENTRY0("SET_BY_8051", D8E(SET_BY_8051)), + FLAG_ENTRY0("LOST_8051_HEART_BEAT", D8E(LOST_8051_HEART_BEAT)), + FLAG_ENTRY0("CRAM_MBE", D8E(CRAM_MBE)), + FLAG_ENTRY0("CRAM_SBE", D8E(CRAM_SBE)), + FLAG_ENTRY0("DRAM_MBE", D8E(DRAM_MBE)), + FLAG_ENTRY0("DRAM_SBE", D8E(DRAM_SBE)), + FLAG_ENTRY0("IRAM_MBE", D8E(IRAM_MBE)), + FLAG_ENTRY0("IRAM_SBE", D8E(IRAM_SBE)), + FLAG_ENTRY0("UNMATCHED_SECURE_MSG_ACROSS_BCC_LANES", + D8E(UNMATCHED_SECURE_MSG_ACROSS_BCC_LANES)), + FLAG_ENTRY0("INVALID_CSR_ADDR", D8E(INVALID_CSR_ADDR)), +}; + +/* + * DC8051 Information Error flags + * + * Flags in DC8051_DBG_ERR_INFO_SET_BY_8051.ERROR field. + */ +static struct flag_table dc8051_info_err_flags[] = { + FLAG_ENTRY0("Spico ROM check failed", SPICO_ROM_FAILED), + FLAG_ENTRY0("Unknown frame received", UNKNOWN_FRAME), + FLAG_ENTRY0("Target BER not met", TARGET_BER_NOT_MET), + FLAG_ENTRY0("Serdes internal loopback failure", + FAILED_SERDES_INTERNAL_LOOPBACK), + FLAG_ENTRY0("Failed SerDes init", FAILED_SERDES_INIT), + FLAG_ENTRY0("Failed LNI(Polling)", FAILED_LNI_POLLING), + FLAG_ENTRY0("Failed LNI(Debounce)", FAILED_LNI_DEBOUNCE), + FLAG_ENTRY0("Failed LNI(EstbComm)", FAILED_LNI_ESTBCOMM), + FLAG_ENTRY0("Failed LNI(OptEq)", FAILED_LNI_OPTEQ), + FLAG_ENTRY0("Failed LNI(VerifyCap_1)", FAILED_LNI_VERIFY_CAP1), + FLAG_ENTRY0("Failed LNI(VerifyCap_2)", FAILED_LNI_VERIFY_CAP2), + FLAG_ENTRY0("Failed LNI(ConfigLT)", FAILED_LNI_CONFIGLT) +}; + +/* + * DC8051 Information Host Information flags + * + * Flags in DC8051_DBG_ERR_INFO_SET_BY_8051.HOST_MSG field. + */ +static struct flag_table dc8051_info_host_msg_flags[] = { + FLAG_ENTRY0("Host request done", 0x0001), + FLAG_ENTRY0("BC SMA message", 0x0002), + FLAG_ENTRY0("BC PWR_MGM message", 0x0004), + FLAG_ENTRY0("BC Unknown message (BCC)", 0x0008), + FLAG_ENTRY0("BC Unknown message (LCB)", 0x0010), + FLAG_ENTRY0("External device config request", 0x0020), + FLAG_ENTRY0("VerifyCap all frames received", 0x0040), + FLAG_ENTRY0("LinkUp achieved", 0x0080), + FLAG_ENTRY0("Link going down", 0x0100), +}; + + +static u32 encoded_size(u32 size); +static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate); +static int set_physical_link_state(struct hfi1_devdata *dd, u64 state); +static void read_vc_remote_phy(struct hfi1_devdata *dd, u8 *power_management, + u8 *continuous); +static void read_vc_remote_fabric(struct hfi1_devdata *dd, u8 *vau, u8 *z, + u8 *vcu, u16 *vl15buf, u8 *crc_sizes); +static void read_vc_remote_link_width(struct hfi1_devdata *dd, + u8 *remote_tx_rate, u16 *link_widths); +static void read_vc_local_link_width(struct hfi1_devdata *dd, u8 *misc_bits, + u8 *flag_bits, u16 *link_widths); +static void read_remote_device_id(struct hfi1_devdata *dd, u16 *device_id, + u8 *device_rev); +static void read_mgmt_allowed(struct hfi1_devdata *dd, u8 *mgmt_allowed); +static void read_local_lni(struct hfi1_devdata *dd, u8 *enable_lane_rx); +static int read_tx_settings(struct hfi1_devdata *dd, u8 *enable_lane_tx, + u8 *tx_polarity_inversion, + u8 *rx_polarity_inversion, u8 *max_rate); +static void handle_sdma_eng_err(struct hfi1_devdata *dd, + unsigned int context, u64 err_status); +static void handle_qsfp_int(struct hfi1_devdata *dd, u32 source, u64 reg); +static void handle_dcc_err(struct hfi1_devdata *dd, + unsigned int context, u64 err_status); +static void handle_lcb_err(struct hfi1_devdata *dd, + unsigned int context, u64 err_status); +static void handle_8051_interrupt(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_cce_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_rxe_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_misc_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_pio_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_sdma_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_egress_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void handle_txe_err(struct hfi1_devdata *dd, u32 unused, u64 reg); +static void set_partition_keys(struct hfi1_pportdata *); +static const char *link_state_name(u32 state); +static const char *link_state_reason_name(struct hfi1_pportdata *ppd, + u32 state); +static int do_8051_command(struct hfi1_devdata *dd, u32 type, u64 in_data, + u64 *out_data); +static int read_idle_sma(struct hfi1_devdata *dd, u64 *data); +static int thermal_init(struct hfi1_devdata *dd); + +static int wait_logical_linkstate(struct hfi1_pportdata *ppd, u32 state, + int msecs); +static void read_planned_down_reason_code(struct hfi1_devdata *dd, u8 *pdrrc); +static void handle_temp_err(struct hfi1_devdata *); +static void dc_shutdown(struct hfi1_devdata *); +static void dc_start(struct hfi1_devdata *); + +/* + * Error interrupt table entry. This is used as input to the interrupt + * "clear down" routine used for all second tier error interrupt register. + * Second tier interrupt registers have a single bit representing them + * in the top-level CceIntStatus. + */ +struct err_reg_info { + u32 status; /* status CSR offset */ + u32 clear; /* clear CSR offset */ + u32 mask; /* mask CSR offset */ + void (*handler)(struct hfi1_devdata *dd, u32 source, u64 reg); + const char *desc; +}; + +#define NUM_MISC_ERRS (IS_GENERAL_ERR_END - IS_GENERAL_ERR_START) +#define NUM_DC_ERRS (IS_DC_END - IS_DC_START) +#define NUM_VARIOUS (IS_VARIOUS_END - IS_VARIOUS_START) + +/* + * Helpers for building HFI and DC error interrupt table entries. Different + * helpers are needed because of inconsistent register names. + */ +#define EE(reg, handler, desc) \ + { reg##_STATUS, reg##_CLEAR, reg##_MASK, \ + handler, desc } +#define DC_EE1(reg, handler, desc) \ + { reg##_FLG, reg##_FLG_CLR, reg##_FLG_EN, handler, desc } +#define DC_EE2(reg, handler, desc) \ + { reg##_FLG, reg##_CLR, reg##_EN, handler, desc } + +/* + * Table of the "misc" grouping of error interrupts. Each entry refers to + * another register containing more information. + */ +static const struct err_reg_info misc_errs[NUM_MISC_ERRS] = { +/* 0*/ EE(CCE_ERR, handle_cce_err, "CceErr"), +/* 1*/ EE(RCV_ERR, handle_rxe_err, "RxeErr"), +/* 2*/ EE(MISC_ERR, handle_misc_err, "MiscErr"), +/* 3*/ { 0, 0, 0, NULL }, /* reserved */ +/* 4*/ EE(SEND_PIO_ERR, handle_pio_err, "PioErr"), +/* 5*/ EE(SEND_DMA_ERR, handle_sdma_err, "SDmaErr"), +/* 6*/ EE(SEND_EGRESS_ERR, handle_egress_err, "EgressErr"), +/* 7*/ EE(SEND_ERR, handle_txe_err, "TxeErr") + /* the rest are reserved */ +}; + +/* + * Index into the Various section of the interrupt sources + * corresponding to the Critical Temperature interrupt. + */ +#define TCRIT_INT_SOURCE 4 + +/* + * SDMA error interrupt entry - refers to another register containing more + * information. + */ +static const struct err_reg_info sdma_eng_err = + EE(SEND_DMA_ENG_ERR, handle_sdma_eng_err, "SDmaEngErr"); + +static const struct err_reg_info various_err[NUM_VARIOUS] = { +/* 0*/ { 0, 0, 0, NULL }, /* PbcInt */ +/* 1*/ { 0, 0, 0, NULL }, /* GpioAssertInt */ +/* 2*/ EE(ASIC_QSFP1, handle_qsfp_int, "QSFP1"), +/* 3*/ EE(ASIC_QSFP2, handle_qsfp_int, "QSFP2"), +/* 4*/ { 0, 0, 0, NULL }, /* TCritInt */ + /* rest are reserved */ +}; + +/* + * The DC encoding of mtu_cap for 10K MTU in the DCC_CFG_PORT_CONFIG + * register can not be derived from the MTU value because 10K is not + * a power of 2. Therefore, we need a constant. Everything else can + * be calculated. + */ +#define DCC_CFG_PORT_MTU_CAP_10240 7 + +/* + * Table of the DC grouping of error interrupts. Each entry refers to + * another register containing more information. + */ +static const struct err_reg_info dc_errs[NUM_DC_ERRS] = { +/* 0*/ DC_EE1(DCC_ERR, handle_dcc_err, "DCC Err"), +/* 1*/ DC_EE2(DC_LCB_ERR, handle_lcb_err, "LCB Err"), +/* 2*/ DC_EE2(DC_DC8051_ERR, handle_8051_interrupt, "DC8051 Interrupt"), +/* 3*/ /* dc_lbm_int - special, see is_dc_int() */ + /* the rest are reserved */ +}; + +struct cntr_entry { + /* + * counter name + */ + char *name; + + /* + * csr to read for name (if applicable) + */ + u64 csr; + + /* + * offset into dd or ppd to store the counter's value + */ + int offset; + + /* + * flags + */ + u8 flags; + + /* + * accessor for stat element, context either dd or ppd + */ + u64 (*rw_cntr)(const struct cntr_entry *, + void *context, + int vl, + int mode, + u64 data); +}; + +#define C_RCV_HDR_OVF_FIRST C_RCV_HDR_OVF_0 +#define C_RCV_HDR_OVF_LAST C_RCV_HDR_OVF_159 + +#define CNTR_ELEM(name, csr, offset, flags, accessor) \ +{ \ + name, \ + csr, \ + offset, \ + flags, \ + accessor \ +} + +/* 32bit RXE */ +#define RXE32_PORT_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + RCV_COUNTER_ARRAY32), \ + 0, flags | CNTR_32BIT, \ + port_access_u32_csr) + +#define RXE32_DEV_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + RCV_COUNTER_ARRAY32), \ + 0, flags | CNTR_32BIT, \ + dev_access_u32_csr) + +/* 64bit RXE */ +#define RXE64_PORT_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + RCV_COUNTER_ARRAY64), \ + 0, flags, \ + port_access_u64_csr) + +#define RXE64_DEV_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + RCV_COUNTER_ARRAY64), \ + 0, flags, \ + dev_access_u64_csr) + +#define OVR_LBL(ctx) C_RCV_HDR_OVF_ ## ctx +#define OVR_ELM(ctx) \ +CNTR_ELEM("RcvHdrOvr" #ctx, \ + (RCV_HDR_OVFL_CNT + ctx*0x100), \ + 0, CNTR_NORMAL, port_access_u64_csr) + +/* 32bit TXE */ +#define TXE32_PORT_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + SEND_COUNTER_ARRAY32), \ + 0, flags | CNTR_32BIT, \ + port_access_u32_csr) + +/* 64bit TXE */ +#define TXE64_PORT_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + SEND_COUNTER_ARRAY64), \ + 0, flags, \ + port_access_u64_csr) + +# define TX64_DEV_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name,\ + counter * 8 + SEND_COUNTER_ARRAY64, \ + 0, \ + flags, \ + dev_access_u64_csr) + +/* CCE */ +#define CCE_PERF_DEV_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + CCE_COUNTER_ARRAY32), \ + 0, flags | CNTR_32BIT, \ + dev_access_u32_csr) + +#define CCE_INT_DEV_CNTR_ELEM(name, counter, flags) \ +CNTR_ELEM(#name, \ + (counter * 8 + CCE_INT_COUNTER_ARRAY32), \ + 0, flags | CNTR_32BIT, \ + dev_access_u32_csr) + +/* DC */ +#define DC_PERF_CNTR(name, counter, flags) \ +CNTR_ELEM(#name, \ + counter, \ + 0, \ + flags, \ + dev_access_u64_csr) + +#define DC_PERF_CNTR_LCB(name, counter, flags) \ +CNTR_ELEM(#name, \ + counter, \ + 0, \ + flags, \ + dc_access_lcb_cntr) + +/* ibp counters */ +#define SW_IBP_CNTR(name, cntr) \ +CNTR_ELEM(#name, \ + 0, \ + 0, \ + CNTR_SYNTH, \ + access_ibp_##cntr) + +u64 read_csr(const struct hfi1_devdata *dd, u32 offset) +{ + u64 val; + + if (dd->flags & HFI1_PRESENT) { + val = readq((void __iomem *)dd->kregbase + offset); + return val; + } + return -1; +} + +void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value) +{ + if (dd->flags & HFI1_PRESENT) + writeq(value, (void __iomem *)dd->kregbase + offset); +} + +void __iomem *get_csr_addr( + struct hfi1_devdata *dd, + u32 offset) +{ + return (void __iomem *)dd->kregbase + offset; +} + +static inline u64 read_write_csr(const struct hfi1_devdata *dd, u32 csr, + int mode, u64 value) +{ + u64 ret; + + + if (mode == CNTR_MODE_R) { + ret = read_csr(dd, csr); + } else if (mode == CNTR_MODE_W) { + write_csr(dd, csr, value); + ret = value; + } else { + dd_dev_err(dd, "Invalid cntr register access mode"); + return 0; + } + + hfi1_cdbg(CNTR, "csr 0x%x val 0x%llx mode %d", csr, ret, mode); + return ret; +} + +/* Dev Access */ +static u64 dev_access_u32_csr(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + return read_write_csr(dd, entry->csr, mode, data); +} + +static u64 dev_access_u64_csr(const struct cntr_entry *entry, void *context, + int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + u64 val = 0; + u64 csr = entry->csr; + + if (entry->flags & CNTR_VL) { + if (vl == CNTR_INVALID_VL) + return 0; + csr += 8 * vl; + } else { + if (vl != CNTR_INVALID_VL) + return 0; + } + + val = read_write_csr(dd, csr, mode, data); + return val; +} + +static u64 dc_access_lcb_cntr(const struct cntr_entry *entry, void *context, + int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + u32 csr = entry->csr; + int ret = 0; + + if (vl != CNTR_INVALID_VL) + return 0; + if (mode == CNTR_MODE_R) + ret = read_lcb_csr(dd, csr, &data); + else if (mode == CNTR_MODE_W) + ret = write_lcb_csr(dd, csr, data); + + if (ret) { + dd_dev_err(dd, "Could not acquire LCB for counter 0x%x", csr); + return 0; + } + + hfi1_cdbg(CNTR, "csr 0x%x val 0x%llx mode %d", csr, data, mode); + return data; +} + +/* Port Access */ +static u64 port_access_u32_csr(const struct cntr_entry *entry, void *context, + int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + return read_write_csr(ppd->dd, entry->csr, mode, data); +} + +static u64 port_access_u64_csr(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + u64 val; + u64 csr = entry->csr; + + if (entry->flags & CNTR_VL) { + if (vl == CNTR_INVALID_VL) + return 0; + csr += 8 * vl; + } else { + if (vl != CNTR_INVALID_VL) + return 0; + } + val = read_write_csr(ppd->dd, csr, mode, data); + return val; +} + +/* Software defined */ +static inline u64 read_write_sw(struct hfi1_devdata *dd, u64 *cntr, int mode, + u64 data) +{ + u64 ret; + + if (mode == CNTR_MODE_R) { + ret = *cntr; + } else if (mode == CNTR_MODE_W) { + *cntr = data; + ret = data; + } else { + dd_dev_err(dd, "Invalid cntr sw access mode"); + return 0; + } + + hfi1_cdbg(CNTR, "val 0x%llx mode %d", ret, mode); + + return ret; +} + +static u64 access_sw_link_dn_cnt(const struct cntr_entry *entry, void *context, + int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + return read_write_sw(ppd->dd, &ppd->link_downed, mode, data); +} + +static u64 access_sw_link_up_cnt(const struct cntr_entry *entry, void *context, + int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + return read_write_sw(ppd->dd, &ppd->link_up, mode, data); +} + +static u64 access_sw_xmit_discards(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + + return read_write_sw(ppd->dd, &ppd->port_xmit_discards, mode, data); +} + +static u64 access_xmit_constraint_errs(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + + return read_write_sw(ppd->dd, &ppd->port_xmit_constraint_errors, + mode, data); +} + +static u64 access_rcv_constraint_errs(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; + + if (vl != CNTR_INVALID_VL) + return 0; + + return read_write_sw(ppd->dd, &ppd->port_rcv_constraint_errors, + mode, data); +} + +u64 get_all_cpu_total(u64 __percpu *cntr) +{ + int cpu; + u64 counter = 0; + + for_each_possible_cpu(cpu) + counter += *per_cpu_ptr(cntr, cpu); + return counter; +} + +static u64 read_write_cpu(struct hfi1_devdata *dd, u64 *z_val, + u64 __percpu *cntr, + int vl, int mode, u64 data) +{ + + u64 ret = 0; + + if (vl != CNTR_INVALID_VL) + return 0; + + if (mode == CNTR_MODE_R) { + ret = get_all_cpu_total(cntr) - *z_val; + } else if (mode == CNTR_MODE_W) { + /* A write can only zero the counter */ + if (data == 0) + *z_val = get_all_cpu_total(cntr); + else + dd_dev_err(dd, "Per CPU cntrs can only be zeroed"); + } else { + dd_dev_err(dd, "Invalid cntr sw cpu access mode"); + return 0; + } + + return ret; +} + +static u64 access_sw_cpu_intr(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + return read_write_cpu(dd, &dd->z_int_counter, dd->int_counter, vl, + mode, data); +} + +static u64 access_sw_cpu_rcv_limit(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + return read_write_cpu(dd, &dd->z_rcv_limit, dd->rcv_limit, vl, + mode, data); +} + +static u64 access_sw_pio_wait(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + return dd->verbs_dev.n_piowait; +} + +static u64 access_sw_vtx_wait(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + return dd->verbs_dev.n_txwait; +} + +static u64 access_sw_kmem_wait(const struct cntr_entry *entry, + void *context, int vl, int mode, u64 data) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)context; + + return dd->verbs_dev.n_kmem_wait; +} + +#define def_access_sw_cpu(cntr) \ +static u64 access_sw_cpu_##cntr(const struct cntr_entry *entry, \ + void *context, int vl, int mode, u64 data) \ +{ \ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; \ + return read_write_cpu(ppd->dd, &ppd->ibport_data.z_ ##cntr, \ + ppd->ibport_data.cntr, vl, \ + mode, data); \ +} + +def_access_sw_cpu(rc_acks); +def_access_sw_cpu(rc_qacks); +def_access_sw_cpu(rc_delayed_comp); + +#define def_access_ibp_counter(cntr) \ +static u64 access_ibp_##cntr(const struct cntr_entry *entry, \ + void *context, int vl, int mode, u64 data) \ +{ \ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)context; \ + \ + if (vl != CNTR_INVALID_VL) \ + return 0; \ + \ + return read_write_sw(ppd->dd, &ppd->ibport_data.n_ ##cntr, \ + mode, data); \ +} + +def_access_ibp_counter(loop_pkts); +def_access_ibp_counter(rc_resends); +def_access_ibp_counter(rnr_naks); +def_access_ibp_counter(other_naks); +def_access_ibp_counter(rc_timeouts); +def_access_ibp_counter(pkt_drops); +def_access_ibp_counter(dmawait); +def_access_ibp_counter(rc_seqnak); +def_access_ibp_counter(rc_dupreq); +def_access_ibp_counter(rdma_seq); +def_access_ibp_counter(unaligned); +def_access_ibp_counter(seq_naks); + +static struct cntr_entry dev_cntrs[DEV_CNTR_LAST] = { +[C_RCV_OVF] = RXE32_DEV_CNTR_ELEM(RcvOverflow, RCV_BUF_OVFL_CNT, CNTR_SYNTH), +[C_RX_TID_FULL] = RXE32_DEV_CNTR_ELEM(RxTIDFullEr, RCV_TID_FULL_ERR_CNT, + CNTR_NORMAL), +[C_RX_TID_INVALID] = RXE32_DEV_CNTR_ELEM(RxTIDInvalid, RCV_TID_VALID_ERR_CNT, + CNTR_NORMAL), +[C_RX_TID_FLGMS] = RXE32_DEV_CNTR_ELEM(RxTidFLGMs, + RCV_TID_FLOW_GEN_MISMATCH_CNT, + CNTR_NORMAL), +[C_RX_CTX_RHQS] = RXE32_DEV_CNTR_ELEM(RxCtxRHQS, RCV_CONTEXT_RHQ_STALL, + CNTR_NORMAL), +[C_RX_CTX_EGRS] = RXE32_DEV_CNTR_ELEM(RxCtxEgrS, RCV_CONTEXT_EGR_STALL, + CNTR_NORMAL), +[C_RCV_TID_FLSMS] = RXE32_DEV_CNTR_ELEM(RxTidFLSMs, + RCV_TID_FLOW_SEQ_MISMATCH_CNT, CNTR_NORMAL), +[C_CCE_PCI_CR_ST] = CCE_PERF_DEV_CNTR_ELEM(CcePciCrSt, + CCE_PCIE_POSTED_CRDT_STALL_CNT, CNTR_NORMAL), +[C_CCE_PCI_TR_ST] = CCE_PERF_DEV_CNTR_ELEM(CcePciTrSt, CCE_PCIE_TRGT_STALL_CNT, + CNTR_NORMAL), +[C_CCE_PIO_WR_ST] = CCE_PERF_DEV_CNTR_ELEM(CcePioWrSt, CCE_PIO_WR_STALL_CNT, + CNTR_NORMAL), +[C_CCE_ERR_INT] = CCE_INT_DEV_CNTR_ELEM(CceErrInt, CCE_ERR_INT_CNT, + CNTR_NORMAL), +[C_CCE_SDMA_INT] = CCE_INT_DEV_CNTR_ELEM(CceSdmaInt, CCE_SDMA_INT_CNT, + CNTR_NORMAL), +[C_CCE_MISC_INT] = CCE_INT_DEV_CNTR_ELEM(CceMiscInt, CCE_MISC_INT_CNT, + CNTR_NORMAL), +[C_CCE_RCV_AV_INT] = CCE_INT_DEV_CNTR_ELEM(CceRcvAvInt, CCE_RCV_AVAIL_INT_CNT, + CNTR_NORMAL), +[C_CCE_RCV_URG_INT] = CCE_INT_DEV_CNTR_ELEM(CceRcvUrgInt, + CCE_RCV_URGENT_INT_CNT, CNTR_NORMAL), +[C_CCE_SEND_CR_INT] = CCE_INT_DEV_CNTR_ELEM(CceSndCrInt, + CCE_SEND_CREDIT_INT_CNT, CNTR_NORMAL), +[C_DC_UNC_ERR] = DC_PERF_CNTR(DcUnctblErr, DCC_ERR_UNCORRECTABLE_CNT, + CNTR_SYNTH), +[C_DC_RCV_ERR] = DC_PERF_CNTR(DcRecvErr, DCC_ERR_PORTRCV_ERR_CNT, CNTR_SYNTH), +[C_DC_FM_CFG_ERR] = DC_PERF_CNTR(DcFmCfgErr, DCC_ERR_FMCONFIG_ERR_CNT, + CNTR_SYNTH), +[C_DC_RMT_PHY_ERR] = DC_PERF_CNTR(DcRmtPhyErr, DCC_ERR_RCVREMOTE_PHY_ERR_CNT, + CNTR_SYNTH), +[C_DC_DROPPED_PKT] = DC_PERF_CNTR(DcDroppedPkt, DCC_ERR_DROPPED_PKT_CNT, + CNTR_SYNTH), +[C_DC_MC_XMIT_PKTS] = DC_PERF_CNTR(DcMcXmitPkts, + DCC_PRF_PORT_XMIT_MULTICAST_CNT, CNTR_SYNTH), +[C_DC_MC_RCV_PKTS] = DC_PERF_CNTR(DcMcRcvPkts, + DCC_PRF_PORT_RCV_MULTICAST_PKT_CNT, + CNTR_SYNTH), +[C_DC_XMIT_CERR] = DC_PERF_CNTR(DcXmitCorr, + DCC_PRF_PORT_XMIT_CORRECTABLE_CNT, CNTR_SYNTH), +[C_DC_RCV_CERR] = DC_PERF_CNTR(DcRcvCorrCnt, DCC_PRF_PORT_RCV_CORRECTABLE_CNT, + CNTR_SYNTH), +[C_DC_RCV_FCC] = DC_PERF_CNTR(DcRxFCntl, DCC_PRF_RX_FLOW_CRTL_CNT, + CNTR_SYNTH), +[C_DC_XMIT_FCC] = DC_PERF_CNTR(DcXmitFCntl, DCC_PRF_TX_FLOW_CRTL_CNT, + CNTR_SYNTH), +[C_DC_XMIT_FLITS] = DC_PERF_CNTR(DcXmitFlits, DCC_PRF_PORT_XMIT_DATA_CNT, + CNTR_SYNTH), +[C_DC_RCV_FLITS] = DC_PERF_CNTR(DcRcvFlits, DCC_PRF_PORT_RCV_DATA_CNT, + CNTR_SYNTH), +[C_DC_XMIT_PKTS] = DC_PERF_CNTR(DcXmitPkts, DCC_PRF_PORT_XMIT_PKTS_CNT, + CNTR_SYNTH), +[C_DC_RCV_PKTS] = DC_PERF_CNTR(DcRcvPkts, DCC_PRF_PORT_RCV_PKTS_CNT, + CNTR_SYNTH), +[C_DC_RX_FLIT_VL] = DC_PERF_CNTR(DcRxFlitVl, DCC_PRF_PORT_VL_RCV_DATA_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_RX_PKT_VL] = DC_PERF_CNTR(DcRxPktVl, DCC_PRF_PORT_VL_RCV_PKTS_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_RCV_FCN] = DC_PERF_CNTR(DcRcvFcn, DCC_PRF_PORT_RCV_FECN_CNT, CNTR_SYNTH), +[C_DC_RCV_FCN_VL] = DC_PERF_CNTR(DcRcvFcnVl, DCC_PRF_PORT_VL_RCV_FECN_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_RCV_BCN] = DC_PERF_CNTR(DcRcvBcn, DCC_PRF_PORT_RCV_BECN_CNT, CNTR_SYNTH), +[C_DC_RCV_BCN_VL] = DC_PERF_CNTR(DcRcvBcnVl, DCC_PRF_PORT_VL_RCV_BECN_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_RCV_BBL] = DC_PERF_CNTR(DcRcvBbl, DCC_PRF_PORT_RCV_BUBBLE_CNT, + CNTR_SYNTH), +[C_DC_RCV_BBL_VL] = DC_PERF_CNTR(DcRcvBblVl, DCC_PRF_PORT_VL_RCV_BUBBLE_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_MARK_FECN] = DC_PERF_CNTR(DcMarkFcn, DCC_PRF_PORT_MARK_FECN_CNT, + CNTR_SYNTH), +[C_DC_MARK_FECN_VL] = DC_PERF_CNTR(DcMarkFcnVl, DCC_PRF_PORT_VL_MARK_FECN_CNT, + CNTR_SYNTH | CNTR_VL), +[C_DC_TOTAL_CRC] = + DC_PERF_CNTR_LCB(DcTotCrc, DC_LCB_ERR_INFO_TOTAL_CRC_ERR, + CNTR_SYNTH), +[C_DC_CRC_LN0] = DC_PERF_CNTR_LCB(DcCrcLn0, DC_LCB_ERR_INFO_CRC_ERR_LN0, + CNTR_SYNTH), +[C_DC_CRC_LN1] = DC_PERF_CNTR_LCB(DcCrcLn1, DC_LCB_ERR_INFO_CRC_ERR_LN1, + CNTR_SYNTH), +[C_DC_CRC_LN2] = DC_PERF_CNTR_LCB(DcCrcLn2, DC_LCB_ERR_INFO_CRC_ERR_LN2, + CNTR_SYNTH), +[C_DC_CRC_LN3] = DC_PERF_CNTR_LCB(DcCrcLn3, DC_LCB_ERR_INFO_CRC_ERR_LN3, + CNTR_SYNTH), +[C_DC_CRC_MULT_LN] = + DC_PERF_CNTR_LCB(DcMultLn, DC_LCB_ERR_INFO_CRC_ERR_MULTI_LN, + CNTR_SYNTH), +[C_DC_TX_REPLAY] = DC_PERF_CNTR_LCB(DcTxReplay, DC_LCB_ERR_INFO_TX_REPLAY_CNT, + CNTR_SYNTH), +[C_DC_RX_REPLAY] = DC_PERF_CNTR_LCB(DcRxReplay, DC_LCB_ERR_INFO_RX_REPLAY_CNT, + CNTR_SYNTH), +[C_DC_SEQ_CRC_CNT] = + DC_PERF_CNTR_LCB(DcLinkSeqCrc, DC_LCB_ERR_INFO_SEQ_CRC_CNT, + CNTR_SYNTH), +[C_DC_ESC0_ONLY_CNT] = + DC_PERF_CNTR_LCB(DcEsc0, DC_LCB_ERR_INFO_ESCAPE_0_ONLY_CNT, + CNTR_SYNTH), +[C_DC_ESC0_PLUS1_CNT] = + DC_PERF_CNTR_LCB(DcEsc1, DC_LCB_ERR_INFO_ESCAPE_0_PLUS1_CNT, + CNTR_SYNTH), +[C_DC_ESC0_PLUS2_CNT] = + DC_PERF_CNTR_LCB(DcEsc0Plus2, DC_LCB_ERR_INFO_ESCAPE_0_PLUS2_CNT, + CNTR_SYNTH), +[C_DC_REINIT_FROM_PEER_CNT] = + DC_PERF_CNTR_LCB(DcReinitPeer, DC_LCB_ERR_INFO_REINIT_FROM_PEER_CNT, + CNTR_SYNTH), +[C_DC_SBE_CNT] = DC_PERF_CNTR_LCB(DcSbe, DC_LCB_ERR_INFO_SBE_CNT, + CNTR_SYNTH), +[C_DC_MISC_FLG_CNT] = + DC_PERF_CNTR_LCB(DcMiscFlg, DC_LCB_ERR_INFO_MISC_FLG_CNT, + CNTR_SYNTH), +[C_DC_PRF_GOOD_LTP_CNT] = + DC_PERF_CNTR_LCB(DcGoodLTP, DC_LCB_PRF_GOOD_LTP_CNT, CNTR_SYNTH), +[C_DC_PRF_ACCEPTED_LTP_CNT] = + DC_PERF_CNTR_LCB(DcAccLTP, DC_LCB_PRF_ACCEPTED_LTP_CNT, + CNTR_SYNTH), +[C_DC_PRF_RX_FLIT_CNT] = + DC_PERF_CNTR_LCB(DcPrfRxFlit, DC_LCB_PRF_RX_FLIT_CNT, CNTR_SYNTH), +[C_DC_PRF_TX_FLIT_CNT] = + DC_PERF_CNTR_LCB(DcPrfTxFlit, DC_LCB_PRF_TX_FLIT_CNT, CNTR_SYNTH), +[C_DC_PRF_CLK_CNTR] = + DC_PERF_CNTR_LCB(DcPrfClk, DC_LCB_PRF_CLK_CNTR, CNTR_SYNTH), +[C_DC_PG_DBG_FLIT_CRDTS_CNT] = + DC_PERF_CNTR_LCB(DcFltCrdts, DC_LCB_PG_DBG_FLIT_CRDTS_CNT, CNTR_SYNTH), +[C_DC_PG_STS_PAUSE_COMPLETE_CNT] = + DC_PERF_CNTR_LCB(DcPauseComp, DC_LCB_PG_STS_PAUSE_COMPLETE_CNT, + CNTR_SYNTH), +[C_DC_PG_STS_TX_SBE_CNT] = + DC_PERF_CNTR_LCB(DcStsTxSbe, DC_LCB_PG_STS_TX_SBE_CNT, CNTR_SYNTH), +[C_DC_PG_STS_TX_MBE_CNT] = + DC_PERF_CNTR_LCB(DcStsTxMbe, DC_LCB_PG_STS_TX_MBE_CNT, + CNTR_SYNTH), +[C_SW_CPU_INTR] = CNTR_ELEM("Intr", 0, 0, CNTR_NORMAL, + access_sw_cpu_intr), +[C_SW_CPU_RCV_LIM] = CNTR_ELEM("RcvLimit", 0, 0, CNTR_NORMAL, + access_sw_cpu_rcv_limit), +[C_SW_VTX_WAIT] = CNTR_ELEM("vTxWait", 0, 0, CNTR_NORMAL, + access_sw_vtx_wait), +[C_SW_PIO_WAIT] = CNTR_ELEM("PioWait", 0, 0, CNTR_NORMAL, + access_sw_pio_wait), +[C_SW_KMEM_WAIT] = CNTR_ELEM("KmemWait", 0, 0, CNTR_NORMAL, + access_sw_kmem_wait), +}; + +static struct cntr_entry port_cntrs[PORT_CNTR_LAST] = { +[C_TX_UNSUP_VL] = TXE32_PORT_CNTR_ELEM(TxUnVLErr, SEND_UNSUP_VL_ERR_CNT, + CNTR_NORMAL), +[C_TX_INVAL_LEN] = TXE32_PORT_CNTR_ELEM(TxInvalLen, SEND_LEN_ERR_CNT, + CNTR_NORMAL), +[C_TX_MM_LEN_ERR] = TXE32_PORT_CNTR_ELEM(TxMMLenErr, SEND_MAX_MIN_LEN_ERR_CNT, + CNTR_NORMAL), +[C_TX_UNDERRUN] = TXE32_PORT_CNTR_ELEM(TxUnderrun, SEND_UNDERRUN_CNT, + CNTR_NORMAL), +[C_TX_FLOW_STALL] = TXE32_PORT_CNTR_ELEM(TxFlowStall, SEND_FLOW_STALL_CNT, + CNTR_NORMAL), +[C_TX_DROPPED] = TXE32_PORT_CNTR_ELEM(TxDropped, SEND_DROPPED_PKT_CNT, + CNTR_NORMAL), +[C_TX_HDR_ERR] = TXE32_PORT_CNTR_ELEM(TxHdrErr, SEND_HEADERS_ERR_CNT, + CNTR_NORMAL), +[C_TX_PKT] = TXE64_PORT_CNTR_ELEM(TxPkt, SEND_DATA_PKT_CNT, CNTR_NORMAL), +[C_TX_WORDS] = TXE64_PORT_CNTR_ELEM(TxWords, SEND_DWORD_CNT, CNTR_NORMAL), +[C_TX_WAIT] = TXE64_PORT_CNTR_ELEM(TxWait, SEND_WAIT_CNT, CNTR_SYNTH), +[C_TX_FLIT_VL] = TXE64_PORT_CNTR_ELEM(TxFlitVL, SEND_DATA_VL0_CNT, + CNTR_SYNTH | CNTR_VL), +[C_TX_PKT_VL] = TXE64_PORT_CNTR_ELEM(TxPktVL, SEND_DATA_PKT_VL0_CNT, + CNTR_SYNTH | CNTR_VL), +[C_TX_WAIT_VL] = TXE64_PORT_CNTR_ELEM(TxWaitVL, SEND_WAIT_VL0_CNT, + CNTR_SYNTH | CNTR_VL), +[C_RX_PKT] = RXE64_PORT_CNTR_ELEM(RxPkt, RCV_DATA_PKT_CNT, CNTR_NORMAL), +[C_RX_WORDS] = RXE64_PORT_CNTR_ELEM(RxWords, RCV_DWORD_CNT, CNTR_NORMAL), +[C_SW_LINK_DOWN] = CNTR_ELEM("SwLinkDown", 0, 0, CNTR_SYNTH | CNTR_32BIT, + access_sw_link_dn_cnt), +[C_SW_LINK_UP] = CNTR_ELEM("SwLinkUp", 0, 0, CNTR_SYNTH | CNTR_32BIT, + access_sw_link_up_cnt), +[C_SW_XMIT_DSCD] = CNTR_ELEM("XmitDscd", 0, 0, CNTR_SYNTH | CNTR_32BIT, + access_sw_xmit_discards), +[C_SW_XMIT_DSCD_VL] = CNTR_ELEM("XmitDscdVl", 0, 0, + CNTR_SYNTH | CNTR_32BIT | CNTR_VL, + access_sw_xmit_discards), +[C_SW_XMIT_CSTR_ERR] = CNTR_ELEM("XmitCstrErr", 0, 0, CNTR_SYNTH, + access_xmit_constraint_errs), +[C_SW_RCV_CSTR_ERR] = CNTR_ELEM("RcvCstrErr", 0, 0, CNTR_SYNTH, + access_rcv_constraint_errs), +[C_SW_IBP_LOOP_PKTS] = SW_IBP_CNTR(LoopPkts, loop_pkts), +[C_SW_IBP_RC_RESENDS] = SW_IBP_CNTR(RcResend, rc_resends), +[C_SW_IBP_RNR_NAKS] = SW_IBP_CNTR(RnrNak, rnr_naks), +[C_SW_IBP_OTHER_NAKS] = SW_IBP_CNTR(OtherNak, other_naks), +[C_SW_IBP_RC_TIMEOUTS] = SW_IBP_CNTR(RcTimeOut, rc_timeouts), +[C_SW_IBP_PKT_DROPS] = SW_IBP_CNTR(PktDrop, pkt_drops), +[C_SW_IBP_DMA_WAIT] = SW_IBP_CNTR(DmaWait, dmawait), +[C_SW_IBP_RC_SEQNAK] = SW_IBP_CNTR(RcSeqNak, rc_seqnak), +[C_SW_IBP_RC_DUPREQ] = SW_IBP_CNTR(RcDupRew, rc_dupreq), +[C_SW_IBP_RDMA_SEQ] = SW_IBP_CNTR(RdmaSeq, rdma_seq), +[C_SW_IBP_UNALIGNED] = SW_IBP_CNTR(Unaligned, unaligned), +[C_SW_IBP_SEQ_NAK] = SW_IBP_CNTR(SeqNak, seq_naks), +[C_SW_CPU_RC_ACKS] = CNTR_ELEM("RcAcks", 0, 0, CNTR_NORMAL, + access_sw_cpu_rc_acks), +[C_SW_CPU_RC_QACKS] = CNTR_ELEM("RcQacks", 0, 0, CNTR_NORMAL, + access_sw_cpu_rc_qacks), +[C_SW_CPU_RC_DELAYED_COMP] = CNTR_ELEM("RcDelayComp", 0, 0, CNTR_NORMAL, + access_sw_cpu_rc_delayed_comp), +[OVR_LBL(0)] = OVR_ELM(0), [OVR_LBL(1)] = OVR_ELM(1), +[OVR_LBL(2)] = OVR_ELM(2), [OVR_LBL(3)] = OVR_ELM(3), +[OVR_LBL(4)] = OVR_ELM(4), [OVR_LBL(5)] = OVR_ELM(5), +[OVR_LBL(6)] = OVR_ELM(6), [OVR_LBL(7)] = OVR_ELM(7), +[OVR_LBL(8)] = OVR_ELM(8), [OVR_LBL(9)] = OVR_ELM(9), +[OVR_LBL(10)] = OVR_ELM(10), [OVR_LBL(11)] = OVR_ELM(11), +[OVR_LBL(12)] = OVR_ELM(12), [OVR_LBL(13)] = OVR_ELM(13), +[OVR_LBL(14)] = OVR_ELM(14), [OVR_LBL(15)] = OVR_ELM(15), +[OVR_LBL(16)] = OVR_ELM(16), [OVR_LBL(17)] = OVR_ELM(17), +[OVR_LBL(18)] = OVR_ELM(18), [OVR_LBL(19)] = OVR_ELM(19), +[OVR_LBL(20)] = OVR_ELM(20), [OVR_LBL(21)] = OVR_ELM(21), +[OVR_LBL(22)] = OVR_ELM(22), [OVR_LBL(23)] = OVR_ELM(23), +[OVR_LBL(24)] = OVR_ELM(24), [OVR_LBL(25)] = OVR_ELM(25), +[OVR_LBL(26)] = OVR_ELM(26), [OVR_LBL(27)] = OVR_ELM(27), +[OVR_LBL(28)] = OVR_ELM(28), [OVR_LBL(29)] = OVR_ELM(29), +[OVR_LBL(30)] = OVR_ELM(30), [OVR_LBL(31)] = OVR_ELM(31), +[OVR_LBL(32)] = OVR_ELM(32), [OVR_LBL(33)] = OVR_ELM(33), +[OVR_LBL(34)] = OVR_ELM(34), [OVR_LBL(35)] = OVR_ELM(35), +[OVR_LBL(36)] = OVR_ELM(36), [OVR_LBL(37)] = OVR_ELM(37), +[OVR_LBL(38)] = OVR_ELM(38), [OVR_LBL(39)] = OVR_ELM(39), +[OVR_LBL(40)] = OVR_ELM(40), [OVR_LBL(41)] = OVR_ELM(41), +[OVR_LBL(42)] = OVR_ELM(42), [OVR_LBL(43)] = OVR_ELM(43), +[OVR_LBL(44)] = OVR_ELM(44), [OVR_LBL(45)] = OVR_ELM(45), +[OVR_LBL(46)] = OVR_ELM(46), [OVR_LBL(47)] = OVR_ELM(47), +[OVR_LBL(48)] = OVR_ELM(48), [OVR_LBL(49)] = OVR_ELM(49), +[OVR_LBL(50)] = OVR_ELM(50), [OVR_LBL(51)] = OVR_ELM(51), +[OVR_LBL(52)] = OVR_ELM(52), [OVR_LBL(53)] = OVR_ELM(53), +[OVR_LBL(54)] = OVR_ELM(54), [OVR_LBL(55)] = OVR_ELM(55), +[OVR_LBL(56)] = OVR_ELM(56), [OVR_LBL(57)] = OVR_ELM(57), +[OVR_LBL(58)] = OVR_ELM(58), [OVR_LBL(59)] = OVR_ELM(59), +[OVR_LBL(60)] = OVR_ELM(60), [OVR_LBL(61)] = OVR_ELM(61), +[OVR_LBL(62)] = OVR_ELM(62), [OVR_LBL(63)] = OVR_ELM(63), +[OVR_LBL(64)] = OVR_ELM(64), [OVR_LBL(65)] = OVR_ELM(65), +[OVR_LBL(66)] = OVR_ELM(66), [OVR_LBL(67)] = OVR_ELM(67), +[OVR_LBL(68)] = OVR_ELM(68), [OVR_LBL(69)] = OVR_ELM(69), +[OVR_LBL(70)] = OVR_ELM(70), [OVR_LBL(71)] = OVR_ELM(71), +[OVR_LBL(72)] = OVR_ELM(72), [OVR_LBL(73)] = OVR_ELM(73), +[OVR_LBL(74)] = OVR_ELM(74), [OVR_LBL(75)] = OVR_ELM(75), +[OVR_LBL(76)] = OVR_ELM(76), [OVR_LBL(77)] = OVR_ELM(77), +[OVR_LBL(78)] = OVR_ELM(78), [OVR_LBL(79)] = OVR_ELM(79), +[OVR_LBL(80)] = OVR_ELM(80), [OVR_LBL(81)] = OVR_ELM(81), +[OVR_LBL(82)] = OVR_ELM(82), [OVR_LBL(83)] = OVR_ELM(83), +[OVR_LBL(84)] = OVR_ELM(84), [OVR_LBL(85)] = OVR_ELM(85), +[OVR_LBL(86)] = OVR_ELM(86), [OVR_LBL(87)] = OVR_ELM(87), +[OVR_LBL(88)] = OVR_ELM(88), [OVR_LBL(89)] = OVR_ELM(89), +[OVR_LBL(90)] = OVR_ELM(90), [OVR_LBL(91)] = OVR_ELM(91), +[OVR_LBL(92)] = OVR_ELM(92), [OVR_LBL(93)] = OVR_ELM(93), +[OVR_LBL(94)] = OVR_ELM(94), [OVR_LBL(95)] = OVR_ELM(95), +[OVR_LBL(96)] = OVR_ELM(96), [OVR_LBL(97)] = OVR_ELM(97), +[OVR_LBL(98)] = OVR_ELM(98), [OVR_LBL(99)] = OVR_ELM(99), +[OVR_LBL(100)] = OVR_ELM(100), [OVR_LBL(101)] = OVR_ELM(101), +[OVR_LBL(102)] = OVR_ELM(102), [OVR_LBL(103)] = OVR_ELM(103), +[OVR_LBL(104)] = OVR_ELM(104), [OVR_LBL(105)] = OVR_ELM(105), +[OVR_LBL(106)] = OVR_ELM(106), [OVR_LBL(107)] = OVR_ELM(107), +[OVR_LBL(108)] = OVR_ELM(108), [OVR_LBL(109)] = OVR_ELM(109), +[OVR_LBL(110)] = OVR_ELM(110), [OVR_LBL(111)] = OVR_ELM(111), +[OVR_LBL(112)] = OVR_ELM(112), [OVR_LBL(113)] = OVR_ELM(113), +[OVR_LBL(114)] = OVR_ELM(114), [OVR_LBL(115)] = OVR_ELM(115), +[OVR_LBL(116)] = OVR_ELM(116), [OVR_LBL(117)] = OVR_ELM(117), +[OVR_LBL(118)] = OVR_ELM(118), [OVR_LBL(119)] = OVR_ELM(119), +[OVR_LBL(120)] = OVR_ELM(120), [OVR_LBL(121)] = OVR_ELM(121), +[OVR_LBL(122)] = OVR_ELM(122), [OVR_LBL(123)] = OVR_ELM(123), +[OVR_LBL(124)] = OVR_ELM(124), [OVR_LBL(125)] = OVR_ELM(125), +[OVR_LBL(126)] = OVR_ELM(126), [OVR_LBL(127)] = OVR_ELM(127), +[OVR_LBL(128)] = OVR_ELM(128), [OVR_LBL(129)] = OVR_ELM(129), +[OVR_LBL(130)] = OVR_ELM(130), [OVR_LBL(131)] = OVR_ELM(131), +[OVR_LBL(132)] = OVR_ELM(132), [OVR_LBL(133)] = OVR_ELM(133), +[OVR_LBL(134)] = OVR_ELM(134), [OVR_LBL(135)] = OVR_ELM(135), +[OVR_LBL(136)] = OVR_ELM(136), [OVR_LBL(137)] = OVR_ELM(137), +[OVR_LBL(138)] = OVR_ELM(138), [OVR_LBL(139)] = OVR_ELM(139), +[OVR_LBL(140)] = OVR_ELM(140), [OVR_LBL(141)] = OVR_ELM(141), +[OVR_LBL(142)] = OVR_ELM(142), [OVR_LBL(143)] = OVR_ELM(143), +[OVR_LBL(144)] = OVR_ELM(144), [OVR_LBL(145)] = OVR_ELM(145), +[OVR_LBL(146)] = OVR_ELM(146), [OVR_LBL(147)] = OVR_ELM(147), +[OVR_LBL(148)] = OVR_ELM(148), [OVR_LBL(149)] = OVR_ELM(149), +[OVR_LBL(150)] = OVR_ELM(150), [OVR_LBL(151)] = OVR_ELM(151), +[OVR_LBL(152)] = OVR_ELM(152), [OVR_LBL(153)] = OVR_ELM(153), +[OVR_LBL(154)] = OVR_ELM(154), [OVR_LBL(155)] = OVR_ELM(155), +[OVR_LBL(156)] = OVR_ELM(156), [OVR_LBL(157)] = OVR_ELM(157), +[OVR_LBL(158)] = OVR_ELM(158), [OVR_LBL(159)] = OVR_ELM(159), +}; + +/* ======================================================================== */ + +/* return true if this is chip revision revision a0 */ +int is_a0(struct hfi1_devdata *dd) +{ + return ((dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT) + & CCE_REVISION_CHIP_REV_MINOR_MASK) == 0; +} + +/* return true if this is chip revision revision a */ +int is_ax(struct hfi1_devdata *dd) +{ + u8 chip_rev_minor = + dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT + & CCE_REVISION_CHIP_REV_MINOR_MASK; + return (chip_rev_minor & 0xf0) == 0; +} + +/* return true if this is chip revision revision b */ +int is_bx(struct hfi1_devdata *dd) +{ + u8 chip_rev_minor = + dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT + & CCE_REVISION_CHIP_REV_MINOR_MASK; + return !!(chip_rev_minor & 0x10); +} + +/* + * Append string s to buffer buf. Arguments curp and len are the current + * position and remaining length, respectively. + * + * return 0 on success, 1 on out of room + */ +static int append_str(char *buf, char **curp, int *lenp, const char *s) +{ + char *p = *curp; + int len = *lenp; + int result = 0; /* success */ + char c; + + /* add a comma, if first in the buffer */ + if (p != buf) { + if (len == 0) { + result = 1; /* out of room */ + goto done; + } + *p++ = ','; + len--; + } + + /* copy the string */ + while ((c = *s++) != 0) { + if (len == 0) { + result = 1; /* out of room */ + goto done; + } + *p++ = c; + len--; + } + +done: + /* write return values */ + *curp = p; + *lenp = len; + + return result; +} + +/* + * Using the given flag table, print a comma separated string into + * the buffer. End in '*' if the buffer is too short. + */ +static char *flag_string(char *buf, int buf_len, u64 flags, + struct flag_table *table, int table_size) +{ + char extra[32]; + char *p = buf; + int len = buf_len; + int no_room = 0; + int i; + + /* make sure there is at least 2 so we can form "*" */ + if (len < 2) + return ""; + + len--; /* leave room for a nul */ + for (i = 0; i < table_size; i++) { + if (flags & table[i].flag) { + no_room = append_str(buf, &p, &len, table[i].str); + if (no_room) + break; + flags &= ~table[i].flag; + } + } + + /* any undocumented bits left? */ + if (!no_room && flags) { + snprintf(extra, sizeof(extra), "bits 0x%llx", flags); + no_room = append_str(buf, &p, &len, extra); + } + + /* add * if ran out of room */ + if (no_room) { + /* may need to back up to add space for a '*' */ + if (len == 0) + --p; + *p++ = '*'; + } + + /* add final nul - space already allocated above */ + *p = 0; + return buf; +} + +/* first 8 CCE error interrupt source names */ +static const char * const cce_misc_names[] = { + "CceErrInt", /* 0 */ + "RxeErrInt", /* 1 */ + "MiscErrInt", /* 2 */ + "Reserved3", /* 3 */ + "PioErrInt", /* 4 */ + "SDmaErrInt", /* 5 */ + "EgressErrInt", /* 6 */ + "TxeErrInt" /* 7 */ +}; + +/* + * Return the miscellaneous error interrupt name. + */ +static char *is_misc_err_name(char *buf, size_t bsize, unsigned int source) +{ + if (source < ARRAY_SIZE(cce_misc_names)) + strncpy(buf, cce_misc_names[source], bsize); + else + snprintf(buf, + bsize, + "Reserved%u", + source + IS_GENERAL_ERR_START); + + return buf; +} + +/* + * Return the SDMA engine error interrupt name. + */ +static char *is_sdma_eng_err_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "SDmaEngErrInt%u", source); + return buf; +} + +/* + * Return the send context error interrupt name. + */ +static char *is_sendctxt_err_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "SendCtxtErrInt%u", source); + return buf; +} + +static const char * const various_names[] = { + "PbcInt", + "GpioAssertInt", + "Qsfp1Int", + "Qsfp2Int", + "TCritInt" +}; + +/* + * Return the various interrupt name. + */ +static char *is_various_name(char *buf, size_t bsize, unsigned int source) +{ + if (source < ARRAY_SIZE(various_names)) + strncpy(buf, various_names[source], bsize); + else + snprintf(buf, bsize, "Reserved%u", source+IS_VARIOUS_START); + return buf; +} + +/* + * Return the DC interrupt name. + */ +static char *is_dc_name(char *buf, size_t bsize, unsigned int source) +{ + static const char * const dc_int_names[] = { + "common", + "lcb", + "8051", + "lbm" /* local block merge */ + }; + + if (source < ARRAY_SIZE(dc_int_names)) + snprintf(buf, bsize, "dc_%s_int", dc_int_names[source]); + else + snprintf(buf, bsize, "DCInt%u", source); + return buf; +} + +static const char * const sdma_int_names[] = { + "SDmaInt", + "SdmaIdleInt", + "SdmaProgressInt", +}; + +/* + * Return the SDMA engine interrupt name. + */ +static char *is_sdma_eng_name(char *buf, size_t bsize, unsigned int source) +{ + /* what interrupt */ + unsigned int what = source / TXE_NUM_SDMA_ENGINES; + /* which engine */ + unsigned int which = source % TXE_NUM_SDMA_ENGINES; + + if (likely(what < 3)) + snprintf(buf, bsize, "%s%u", sdma_int_names[what], which); + else + snprintf(buf, bsize, "Invalid SDMA interrupt %u", source); + return buf; +} + +/* + * Return the receive available interrupt name. + */ +static char *is_rcv_avail_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "RcvAvailInt%u", source); + return buf; +} + +/* + * Return the receive urgent interrupt name. + */ +static char *is_rcv_urgent_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "RcvUrgentInt%u", source); + return buf; +} + +/* + * Return the send credit interrupt name. + */ +static char *is_send_credit_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "SendCreditInt%u", source); + return buf; +} + +/* + * Return the reserved interrupt name. + */ +static char *is_reserved_name(char *buf, size_t bsize, unsigned int source) +{ + snprintf(buf, bsize, "Reserved%u", source + IS_RESERVED_START); + return buf; +} + +static char *cce_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + cce_err_status_flags, ARRAY_SIZE(cce_err_status_flags)); +} + +static char *rxe_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + rxe_err_status_flags, ARRAY_SIZE(rxe_err_status_flags)); +} + +static char *misc_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, misc_err_status_flags, + ARRAY_SIZE(misc_err_status_flags)); +} + +static char *pio_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + pio_err_status_flags, ARRAY_SIZE(pio_err_status_flags)); +} + +static char *sdma_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + sdma_err_status_flags, + ARRAY_SIZE(sdma_err_status_flags)); +} + +static char *egress_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + egress_err_status_flags, ARRAY_SIZE(egress_err_status_flags)); +} + +static char *egress_err_info_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + egress_err_info_flags, ARRAY_SIZE(egress_err_info_flags)); +} + +static char *send_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + send_err_status_flags, + ARRAY_SIZE(send_err_status_flags)); +} + +static void handle_cce_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + /* + * For most these errors, there is nothing that can be done except + * report or record it. + */ + dd_dev_info(dd, "CCE Error: %s\n", + cce_err_status_string(buf, sizeof(buf), reg)); + + if ((reg & CCE_ERR_STATUS_CCE_CLI2_ASYNC_FIFO_PARITY_ERR_SMASK) + && is_a0(dd) + && (dd->icode != ICODE_FUNCTIONAL_SIMULATOR)) { + /* this error requires a manual drop into SPC freeze mode */ + /* then a fix up */ + start_freeze_handling(dd->pport, FREEZE_SELF); + } +} + +/* + * Check counters for receive errors that do not have an interrupt + * associated with them. + */ +#define RCVERR_CHECK_TIME 10 +static void update_rcverr_timer(unsigned long opaque) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)opaque; + struct hfi1_pportdata *ppd = dd->pport; + u32 cur_ovfl_cnt = read_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL); + + if (dd->rcv_ovfl_cnt < cur_ovfl_cnt && + ppd->port_error_action & OPA_PI_MASK_EX_BUFFER_OVERRUN) { + dd_dev_info(dd, "%s: PortErrorAction bounce\n", __func__); + set_link_down_reason(ppd, + OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN, 0, + OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN); + queue_work(ppd->hfi1_wq, &ppd->link_bounce_work); + } + dd->rcv_ovfl_cnt = (u32) cur_ovfl_cnt; + + mod_timer(&dd->rcverr_timer, jiffies + HZ * RCVERR_CHECK_TIME); +} + +static int init_rcverr(struct hfi1_devdata *dd) +{ + init_timer(&dd->rcverr_timer); + dd->rcverr_timer.function = update_rcverr_timer; + dd->rcverr_timer.data = (unsigned long) dd; + /* Assume the hardware counter has been reset */ + dd->rcv_ovfl_cnt = 0; + return mod_timer(&dd->rcverr_timer, jiffies + HZ * RCVERR_CHECK_TIME); +} + +static void free_rcverr(struct hfi1_devdata *dd) +{ + if (dd->rcverr_timer.data) + del_timer_sync(&dd->rcverr_timer); + dd->rcverr_timer.data = 0; +} + +static void handle_rxe_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Receive Error: %s\n", + rxe_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_RXE_FREEZE_ERR) { + int flags = 0; + + /* + * Freeze mode recovery is disabled for the errors + * in RXE_FREEZE_ABORT_MASK + */ + if (is_a0(dd) && (reg & RXE_FREEZE_ABORT_MASK)) + flags = FREEZE_ABORT; + + start_freeze_handling(dd->pport, flags); + } +} + +static void handle_misc_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Misc Error: %s", + misc_err_status_string(buf, sizeof(buf), reg)); +} + +static void handle_pio_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "PIO Error: %s\n", + pio_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_PIO_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); +} + +static void handle_sdma_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "SDMA Error: %s\n", + sdma_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_SDMA_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); +} + +static void count_port_inactive(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = dd->pport; + + if (ppd->port_xmit_discards < ~(u64)0) + ppd->port_xmit_discards++; +} + +/* + * We have had a "disallowed packet" error during egress. Determine the + * integrity check which failed, and update relevant error counter, etc. + * + * Note that the SEND_EGRESS_ERR_INFO register has only a single + * bit of state per integrity check, and so we can miss the reason for an + * egress error if more than one packet fails the same integrity check + * since we cleared the corresponding bit in SEND_EGRESS_ERR_INFO. + */ +static void handle_send_egress_err_info(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = dd->pport; + u64 src = read_csr(dd, SEND_EGRESS_ERR_SOURCE); /* read first */ + u64 info = read_csr(dd, SEND_EGRESS_ERR_INFO); + char buf[96]; + + /* clear down all observed info as quickly as possible after read */ + write_csr(dd, SEND_EGRESS_ERR_INFO, info); + + dd_dev_info(dd, + "Egress Error Info: 0x%llx, %s Egress Error Src 0x%llx\n", + info, egress_err_info_string(buf, sizeof(buf), info), src); + + /* Eventually add other counters for each bit */ + + if (info & SEND_EGRESS_ERR_INFO_TOO_LONG_IB_PACKET_ERR_SMASK) { + if (ppd->port_xmit_discards < ~(u64)0) + ppd->port_xmit_discards++; + } +} + +/* + * Input value is a bit position within the SEND_EGRESS_ERR_STATUS + * register. Does it represent a 'port inactive' error? + */ +static inline int port_inactive_err(u64 posn) +{ + return (posn >= SEES(TX_LINKDOWN) && + posn <= SEES(TX_INCORRECT_LINK_STATE)); +} + +/* + * Input value is a bit position within the SEND_EGRESS_ERR_STATUS + * register. Does it represent a 'disallowed packet' error? + */ +static inline int disallowed_pkt_err(u64 posn) +{ + return (posn >= SEES(TX_SDMA0_DISALLOWED_PACKET) && + posn <= SEES(TX_SDMA15_DISALLOWED_PACKET)); +} + +static void handle_egress_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + u64 reg_copy = reg, handled = 0; + char buf[96]; + + if (reg & ALL_TXE_EGRESS_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); + if (is_a0(dd) && (reg & + SEND_EGRESS_ERR_STATUS_TX_CREDIT_RETURN_VL_ERR_SMASK) + && (dd->icode != ICODE_FUNCTIONAL_SIMULATOR)) + start_freeze_handling(dd->pport, 0); + + while (reg_copy) { + int posn = fls64(reg_copy); + /* + * fls64() returns a 1-based offset, but we generally + * want 0-based offsets. + */ + int shift = posn - 1; + + if (port_inactive_err(shift)) { + count_port_inactive(dd); + handled |= (1ULL << shift); + } else if (disallowed_pkt_err(shift)) { + handle_send_egress_err_info(dd); + handled |= (1ULL << shift); + } + clear_bit(shift, (unsigned long *)®_copy); + } + + reg &= ~handled; + + if (reg) + dd_dev_info(dd, "Egress Error: %s\n", + egress_err_status_string(buf, sizeof(buf), reg)); +} + +static void handle_txe_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Send Error: %s\n", + send_err_status_string(buf, sizeof(buf), reg)); + +} + +/* + * The maximum number of times the error clear down will loop before + * blocking a repeating error. This value is arbitrary. + */ +#define MAX_CLEAR_COUNT 20 + +/* + * Clear and handle an error register. All error interrupts are funneled + * through here to have a central location to correctly handle single- + * or multi-shot errors. + * + * For non per-context registers, call this routine with a context value + * of 0 so the per-context offset is zero. + * + * If the handler loops too many times, assume that something is wrong + * and can't be fixed, so mask the error bits. + */ +static void interrupt_clear_down(struct hfi1_devdata *dd, + u32 context, + const struct err_reg_info *eri) +{ + u64 reg; + u32 count; + + /* read in a loop until no more errors are seen */ + count = 0; + while (1) { + reg = read_kctxt_csr(dd, context, eri->status); + if (reg == 0) + break; + write_kctxt_csr(dd, context, eri->clear, reg); + if (likely(eri->handler)) + eri->handler(dd, context, reg); + count++; + if (count > MAX_CLEAR_COUNT) { + u64 mask; + + dd_dev_err(dd, "Repeating %s bits 0x%llx - masking\n", + eri->desc, reg); + /* + * Read-modify-write so any other masked bits + * remain masked. + */ + mask = read_kctxt_csr(dd, context, eri->mask); + mask &= ~reg; + write_kctxt_csr(dd, context, eri->mask, mask); + break; + } + } +} + +/* + * CCE block "misc" interrupt. Source is < 16. + */ +static void is_misc_err_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &misc_errs[source]; + + if (eri->handler) { + interrupt_clear_down(dd, 0, eri); + } else { + dd_dev_err(dd, "Unexpected misc interrupt (%u) - reserved\n", + source); + } +} + +static char *send_context_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + sc_err_status_flags, ARRAY_SIZE(sc_err_status_flags)); +} + +/* + * Send context error interrupt. Source (hw_context) is < 160. + * + * All send context errors cause the send context to halt. The normal + * clear-down mechanism cannot be used because we cannot clear the + * error bits until several other long-running items are done first. + * This is OK because with the context halted, nothing else is going + * to happen on it anyway. + */ +static void is_sendctxt_err_int(struct hfi1_devdata *dd, + unsigned int hw_context) +{ + struct send_context_info *sci; + struct send_context *sc; + char flags[96]; + u64 status; + u32 sw_index; + + sw_index = dd->hw_to_sw[hw_context]; + if (sw_index >= dd->num_send_contexts) { + dd_dev_err(dd, + "out of range sw index %u for send context %u\n", + sw_index, hw_context); + return; + } + sci = &dd->send_contexts[sw_index]; + sc = sci->sc; + if (!sc) { + dd_dev_err(dd, "%s: context %u(%u): no sc?\n", __func__, + sw_index, hw_context); + return; + } + + /* tell the software that a halt has begun */ + sc_stop(sc, SCF_HALTED); + + status = read_kctxt_csr(dd, hw_context, SEND_CTXT_ERR_STATUS); + + dd_dev_info(dd, "Send Context %u(%u) Error: %s\n", sw_index, hw_context, + send_context_err_status_string(flags, sizeof(flags), status)); + + if (status & SEND_CTXT_ERR_STATUS_PIO_DISALLOWED_PACKET_ERR_SMASK) + handle_send_egress_err_info(dd); + + /* + * Automatically restart halted kernel contexts out of interrupt + * context. User contexts must ask the driver to restart the context. + */ + if (sc->type != SC_USER) + queue_work(dd->pport->hfi1_wq, &sc->halt_work); +} + +static void handle_sdma_eng_err(struct hfi1_devdata *dd, + unsigned int source, u64 status) +{ + struct sdma_engine *sde; + + sde = &dd->per_sdma[source]; +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(sde->dd, "CONFIG SDMA(%u) source: %u status 0x%llx\n", + sde->this_idx, source, (unsigned long long)status); +#endif + sdma_engine_error(sde, status); +} + +/* + * CCE block SDMA error interrupt. Source is < 16. + */ +static void is_sdma_eng_err_int(struct hfi1_devdata *dd, unsigned int source) +{ +#ifdef CONFIG_SDMA_VERBOSITY + struct sdma_engine *sde = &dd->per_sdma[source]; + + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(dd, "CONFIG SDMA(%u) source: %u\n", sde->this_idx, + source); + sdma_dumpstate(sde); +#endif + interrupt_clear_down(dd, source, &sdma_eng_err); +} + +/* + * CCE block "various" interrupt. Source is < 8. + */ +static void is_various_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &various_err[source]; + + /* + * TCritInt cannot go through interrupt_clear_down() + * because it is not a second tier interrupt. The handler + * should be called directly. + */ + if (source == TCRIT_INT_SOURCE) + handle_temp_err(dd); + else if (eri->handler) + interrupt_clear_down(dd, 0, eri); + else + dd_dev_info(dd, + "%s: Unimplemented/reserved interrupt %d\n", + __func__, source); +} + +static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg) +{ + /* source is always zero */ + struct hfi1_pportdata *ppd = dd->pport; + unsigned long flags; + u64 qsfp_int_mgmt = (u64)(QSFP_HFI0_INT_N | QSFP_HFI0_MODPRST_N); + + if (reg & QSFP_HFI0_MODPRST_N) { + + dd_dev_info(dd, "%s: ModPresent triggered QSFP interrupt\n", + __func__); + + if (!qsfp_mod_present(ppd)) { + ppd->driver_link_ready = 0; + /* + * Cable removed, reset all our information about the + * cache and cable capabilities + */ + + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + /* + * We don't set cache_refresh_required here as we expect + * an interrupt when a cable is inserted + */ + ppd->qsfp_info.cache_valid = 0; + ppd->qsfp_info.qsfp_interrupt_functional = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, + flags); + write_csr(dd, + dd->hfi1_id ? + ASIC_QSFP2_INVERT : + ASIC_QSFP1_INVERT, + qsfp_int_mgmt); + if (ppd->host_link_state == HLS_DN_POLL) { + /* + * The link is still in POLL. This means + * that the normal link down processing + * will not happen. We have to do it here + * before turning the DC off. + */ + queue_work(ppd->hfi1_wq, &ppd->link_down_work); + } + } else { + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.cache_valid = 0; + ppd->qsfp_info.cache_refresh_required = 1; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, + flags); + + qsfp_int_mgmt &= ~(u64)QSFP_HFI0_MODPRST_N; + write_csr(dd, + dd->hfi1_id ? + ASIC_QSFP2_INVERT : + ASIC_QSFP1_INVERT, + qsfp_int_mgmt); + } + } + + if (reg & QSFP_HFI0_INT_N) { + + dd_dev_info(dd, "%s: IntN triggered QSFP interrupt\n", + __func__); + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.check_interrupt_flags = 1; + ppd->qsfp_info.qsfp_interrupt_functional = 1; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); + } + + /* Schedule the QSFP work only if there is a cable attached. */ + if (qsfp_mod_present(ppd)) + queue_work(ppd->hfi1_wq, &ppd->qsfp_info.qsfp_work); +} + +static int request_host_lcb_access(struct hfi1_devdata *dd) +{ + int ret; + + ret = do_8051_command(dd, HCMD_MISC, + (u64)HCMD_MISC_REQUEST_LCB_ACCESS << LOAD_DATA_FIELD_ID_SHIFT, + NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "%s: command failed with error %d\n", + __func__, ret); + } + return ret == HCMD_SUCCESS ? 0 : -EBUSY; +} + +static int request_8051_lcb_access(struct hfi1_devdata *dd) +{ + int ret; + + ret = do_8051_command(dd, HCMD_MISC, + (u64)HCMD_MISC_GRANT_LCB_ACCESS << LOAD_DATA_FIELD_ID_SHIFT, + NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "%s: command failed with error %d\n", + __func__, ret); + } + return ret == HCMD_SUCCESS ? 0 : -EBUSY; +} + +/* + * Set the LCB selector - allow host access. The DCC selector always + * points to the host. + */ +static inline void set_host_lcb_access(struct hfi1_devdata *dd) +{ + write_csr(dd, DC_DC8051_CFG_CSR_ACCESS_SEL, + DC_DC8051_CFG_CSR_ACCESS_SEL_DCC_SMASK + | DC_DC8051_CFG_CSR_ACCESS_SEL_LCB_SMASK); +} + +/* + * Clear the LCB selector - allow 8051 access. The DCC selector always + * points to the host. + */ +static inline void set_8051_lcb_access(struct hfi1_devdata *dd) +{ + write_csr(dd, DC_DC8051_CFG_CSR_ACCESS_SEL, + DC_DC8051_CFG_CSR_ACCESS_SEL_DCC_SMASK); +} + +/* + * Acquire LCB access from the 8051. If the host already has access, + * just increment a counter. Otherwise, inform the 8051 that the + * host is taking access. + * + * Returns: + * 0 on success + * -EBUSY if the 8051 has control and cannot be disturbed + * -errno if unable to acquire access from the 8051 + */ +int acquire_lcb_access(struct hfi1_devdata *dd, int sleep_ok) +{ + struct hfi1_pportdata *ppd = dd->pport; + int ret = 0; + + /* + * Use the host link state lock so the operation of this routine + * { link state check, selector change, count increment } can occur + * as a unit against a link state change. Otherwise there is a + * race between the state change and the count increment. + */ + if (sleep_ok) { + mutex_lock(&ppd->hls_lock); + } else { + while (mutex_trylock(&ppd->hls_lock) == EBUSY) + udelay(1); + } + + /* this access is valid only when the link is up */ + if ((ppd->host_link_state & HLS_UP) == 0) { + dd_dev_info(dd, "%s: link state %s not up\n", + __func__, link_state_name(ppd->host_link_state)); + ret = -EBUSY; + goto done; + } + + if (dd->lcb_access_count == 0) { + ret = request_host_lcb_access(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire LCB access, err %d\n", + __func__, ret); + goto done; + } + set_host_lcb_access(dd); + } + dd->lcb_access_count++; +done: + mutex_unlock(&ppd->hls_lock); + return ret; +} + +/* + * Release LCB access by decrementing the use count. If the count is moving + * from 1 to 0, inform 8051 that it has control back. + * + * Returns: + * 0 on success + * -errno if unable to release access to the 8051 + */ +int release_lcb_access(struct hfi1_devdata *dd, int sleep_ok) +{ + int ret = 0; + + /* + * Use the host link state lock because the acquire needed it. + * Here, we only need to keep { selector change, count decrement } + * as a unit. + */ + if (sleep_ok) { + mutex_lock(&dd->pport->hls_lock); + } else { + while (mutex_trylock(&dd->pport->hls_lock) == EBUSY) + udelay(1); + } + + if (dd->lcb_access_count == 0) { + dd_dev_err(dd, "%s: LCB access count is zero. Skipping.\n", + __func__); + goto done; + } + + if (dd->lcb_access_count == 1) { + set_8051_lcb_access(dd); + ret = request_8051_lcb_access(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to release LCB access, err %d\n", + __func__, ret); + /* restore host access if the grant didn't work */ + set_host_lcb_access(dd); + goto done; + } + } + dd->lcb_access_count--; +done: + mutex_unlock(&dd->pport->hls_lock); + return ret; +} + +/* + * Initialize LCB access variables and state. Called during driver load, + * after most of the initialization is finished. + * + * The DC default is LCB access on for the host. The driver defaults to + * leaving access to the 8051. Assign access now - this constrains the call + * to this routine to be after all LCB set-up is done. In particular, after + * hf1_init_dd() -> set_up_interrupts() -> clear_all_interrupts() + */ +static void init_lcb_access(struct hfi1_devdata *dd) +{ + dd->lcb_access_count = 0; +} + +/* + * Write a response back to a 8051 request. + */ +static void hreq_response(struct hfi1_devdata *dd, u8 return_code, u16 rsp_data) +{ + write_csr(dd, DC_DC8051_CFG_EXT_DEV_0, + DC_DC8051_CFG_EXT_DEV_0_COMPLETED_SMASK + | (u64)return_code << DC_DC8051_CFG_EXT_DEV_0_RETURN_CODE_SHIFT + | (u64)rsp_data << DC_DC8051_CFG_EXT_DEV_0_RSP_DATA_SHIFT); +} + +/* + * Handle requests from the 8051. + */ +static void handle_8051_request(struct hfi1_devdata *dd) +{ + u64 reg; + u16 data; + u8 type; + + reg = read_csr(dd, DC_DC8051_CFG_EXT_DEV_1); + if ((reg & DC_DC8051_CFG_EXT_DEV_1_REQ_NEW_SMASK) == 0) + return; /* no request */ + + /* zero out COMPLETED so the response is seen */ + write_csr(dd, DC_DC8051_CFG_EXT_DEV_0, 0); + + /* extract request details */ + type = (reg >> DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_SHIFT) + & DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_MASK; + data = (reg >> DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SHIFT) + & DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_MASK; + + switch (type) { + case HREQ_LOAD_CONFIG: + case HREQ_SAVE_CONFIG: + case HREQ_READ_CONFIG: + case HREQ_SET_TX_EQ_ABS: + case HREQ_SET_TX_EQ_REL: + case HREQ_ENABLE: + dd_dev_info(dd, "8051 request: request 0x%x not supported\n", + type); + hreq_response(dd, HREQ_NOT_SUPPORTED, 0); + break; + + case HREQ_CONFIG_DONE: + hreq_response(dd, HREQ_SUCCESS, 0); + break; + + case HREQ_INTERFACE_TEST: + hreq_response(dd, HREQ_SUCCESS, data); + break; + + default: + dd_dev_err(dd, "8051 request: unknown request 0x%x\n", type); + hreq_response(dd, HREQ_NOT_SUPPORTED, 0); + break; + } +} + +static void write_global_credit(struct hfi1_devdata *dd, + u8 vau, u16 total, u16 shared) +{ + write_csr(dd, SEND_CM_GLOBAL_CREDIT, + ((u64)total + << SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT) + | ((u64)shared + << SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT) + | ((u64)vau << SEND_CM_GLOBAL_CREDIT_AU_SHIFT)); +} + +/* + * Set up initial VL15 credits of the remote. Assumes the rest of + * the CM credit registers are zero from a previous global or credit reset . + */ +void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf) +{ + /* leave shared count at zero for both global and VL15 */ + write_global_credit(dd, vau, vl15buf, 0); + + /* We may need some credits for another VL when sending packets + * with the snoop interface. Dividing it down the middle for VL15 + * and VL0 should suffice. + */ + if (unlikely(dd->hfi1_snoop.mode_flag == HFI1_PORT_SNOOP_MODE)) { + write_csr(dd, SEND_CM_CREDIT_VL15, (u64)(vl15buf >> 1) + << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); + write_csr(dd, SEND_CM_CREDIT_VL, (u64)(vl15buf >> 1) + << SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SHIFT); + } else { + write_csr(dd, SEND_CM_CREDIT_VL15, (u64)vl15buf + << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); + } +} + +/* + * Zero all credit details from the previous connection and + * reset the CM manager's internal counters. + */ +void reset_link_credits(struct hfi1_devdata *dd) +{ + int i; + + /* remove all previous VL credit limits */ + for (i = 0; i < TXE_NUM_DATA_VL; i++) + write_csr(dd, SEND_CM_CREDIT_VL + (8*i), 0); + write_csr(dd, SEND_CM_CREDIT_VL15, 0); + write_global_credit(dd, 0, 0, 0); + /* reset the CM block */ + pio_send_control(dd, PSC_CM_RESET); +} + +/* convert a vCU to a CU */ +static u32 vcu_to_cu(u8 vcu) +{ + return 1 << vcu; +} + +/* convert a CU to a vCU */ +static u8 cu_to_vcu(u32 cu) +{ + return ilog2(cu); +} + +/* convert a vAU to an AU */ +static u32 vau_to_au(u8 vau) +{ + return 8 * (1 << vau); +} + +static void set_linkup_defaults(struct hfi1_pportdata *ppd) +{ + ppd->sm_trap_qp = 0x0; + ppd->sa_qp = 0x1; +} + +/* + * Graceful LCB shutdown. This leaves the LCB FIFOs in reset. + */ +static void lcb_shutdown(struct hfi1_devdata *dd, int abort) +{ + u64 reg; + + /* clear lcb run: LCB_CFG_RUN.EN = 0 */ + write_csr(dd, DC_LCB_CFG_RUN, 0); + /* set tx fifo reset: LCB_CFG_TX_FIFOS_RESET.VAL = 1 */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, + 1ull << DC_LCB_CFG_TX_FIFOS_RESET_VAL_SHIFT); + /* set dcc reset csr: DCC_CFG_RESET.{reset_lcb,reset_rx_fpe} = 1 */ + dd->lcb_err_en = read_csr(dd, DC_LCB_ERR_EN); + reg = read_csr(dd, DCC_CFG_RESET); + write_csr(dd, DCC_CFG_RESET, + reg + | (1ull << DCC_CFG_RESET_RESET_LCB_SHIFT) + | (1ull << DCC_CFG_RESET_RESET_RX_FPE_SHIFT)); + (void) read_csr(dd, DCC_CFG_RESET); /* make sure the write completed */ + if (!abort) { + udelay(1); /* must hold for the longer of 16cclks or 20ns */ + write_csr(dd, DCC_CFG_RESET, reg); + write_csr(dd, DC_LCB_ERR_EN, dd->lcb_err_en); + } +} + +/* + * This routine should be called after the link has been transitioned to + * OFFLINE (OFFLINE state has the side effect of putting the SerDes into + * reset). + * + * The expectation is that the caller of this routine would have taken + * care of properly transitioning the link into the correct state. + */ +static void dc_shutdown(struct hfi1_devdata *dd) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->dc8051_lock, flags); + if (dd->dc_shutdown) { + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + return; + } + dd->dc_shutdown = 1; + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + /* Shutdown the LCB */ + lcb_shutdown(dd, 1); + /* Going to OFFLINE would have causes the 8051 to put the + * SerDes into reset already. Just need to shut down the 8051, + * itself. */ + write_csr(dd, DC_DC8051_CFG_RST, 0x1); +} + +/* Calling this after the DC has been brought out of reset should not + * do any damage. */ +static void dc_start(struct hfi1_devdata *dd) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&dd->dc8051_lock, flags); + if (!dd->dc_shutdown) + goto done; + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + /* Take the 8051 out of reset */ + write_csr(dd, DC_DC8051_CFG_RST, 0ull); + /* Wait until 8051 is ready */ + ret = wait_fm_ready(dd, TIMEOUT_8051_START); + if (ret) { + dd_dev_err(dd, "%s: timeout starting 8051 firmware\n", + __func__); + } + /* Take away reset for LCB and RX FPE (set in lcb_shutdown). */ + write_csr(dd, DCC_CFG_RESET, 0x10); + /* lcb_shutdown() with abort=1 does not restore these */ + write_csr(dd, DC_LCB_ERR_EN, dd->lcb_err_en); + spin_lock_irqsave(&dd->dc8051_lock, flags); + dd->dc_shutdown = 0; +done: + spin_unlock_irqrestore(&dd->dc8051_lock, flags); +} + +/* + * These LCB adjustments are for the Aurora SerDes core in the FPGA. + */ +static void adjust_lcb_for_fpga_serdes(struct hfi1_devdata *dd) +{ + u64 rx_radr, tx_radr; + u32 version; + + if (dd->icode != ICODE_FPGA_EMULATION) + return; + + /* + * These LCB defaults on emulator _s are good, nothing to do here: + * LCB_CFG_TX_FIFOS_RADR + * LCB_CFG_RX_FIFOS_RADR + * LCB_CFG_LN_DCLK + * LCB_CFG_IGNORE_LOST_RCLK + */ + if (is_emulator_s(dd)) + return; + /* else this is _p */ + + version = emulator_rev(dd); + if (!is_a0(dd)) + version = 0x2d; /* all B0 use 0x2d or higher settings */ + + if (version <= 0x12) { + /* release 0x12 and below */ + + /* + * LCB_CFG_RX_FIFOS_RADR.RST_VAL = 0x9 + * LCB_CFG_RX_FIFOS_RADR.OK_TO_JUMP_VAL = 0x9 + * LCB_CFG_RX_FIFOS_RADR.DO_NOT_JUMP_VAL = 0xa + */ + rx_radr = + 0xaull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + /* + * LCB_CFG_TX_FIFOS_RADR.ON_REINIT = 0 (default) + * LCB_CFG_TX_FIFOS_RADR.RST_VAL = 6 + */ + tx_radr = 6ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version <= 0x18) { + /* release 0x13 up to 0x18 */ + /* LCB_CFG_RX_FIFOS_RADR = 0x988 */ + rx_radr = + 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 7ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version == 0x19) { + /* release 0x19 */ + /* LCB_CFG_RX_FIFOS_RADR = 0xa99 */ + rx_radr = + 0xAull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 3ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version == 0x1a) { + /* release 0x1a */ + /* LCB_CFG_RX_FIFOS_RADR = 0x988 */ + rx_radr = + 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 7ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + write_csr(dd, DC_LCB_CFG_LN_DCLK, 1ull); + } else { + /* release 0x1b and higher */ + /* LCB_CFG_RX_FIFOS_RADR = 0x877 */ + rx_radr = + 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x7ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x7ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 3ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } + + write_csr(dd, DC_LCB_CFG_RX_FIFOS_RADR, rx_radr); + /* LCB_CFG_IGNORE_LOST_RCLK.EN = 1 */ + write_csr(dd, DC_LCB_CFG_IGNORE_LOST_RCLK, + DC_LCB_CFG_IGNORE_LOST_RCLK_EN_SMASK); + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RADR, tx_radr); +} + +/* + * Handle a SMA idle message + * + * This is a work-queue function outside of the interrupt. + */ +void handle_sma_message(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + sma_message_work); + struct hfi1_devdata *dd = ppd->dd; + u64 msg; + int ret; + + /* msg is bytes 1-4 of the 40-bit idle message - the command code + is stripped off */ + ret = read_idle_sma(dd, &msg); + if (ret) + return; + dd_dev_info(dd, "%s: SMA message 0x%llx\n", __func__, msg); + /* + * React to the SMA message. Byte[1] (0 for us) is the command. + */ + switch (msg & 0xff) { + case SMA_IDLE_ARM: + /* + * See OPAv1 table 9-14 - HFI and External Switch Ports Key + * State Transitions + * + * Only expected in INIT or ARMED, discard otherwise. + */ + if (ppd->host_link_state & (HLS_UP_INIT | HLS_UP_ARMED)) + ppd->neighbor_normal = 1; + break; + case SMA_IDLE_ACTIVE: + /* + * See OPAv1 table 9-14 - HFI and External Switch Ports Key + * State Transitions + * + * Can activate the node. Discard otherwise. + */ + if (ppd->host_link_state == HLS_UP_ARMED + && ppd->is_active_optimize_enabled) { + ppd->neighbor_normal = 1; + ret = set_link_state(ppd, HLS_UP_ACTIVE); + if (ret) + dd_dev_err( + dd, + "%s: received Active SMA idle message, couldn't set link to Active\n", + __func__); + } + break; + default: + dd_dev_err(dd, + "%s: received unexpected SMA idle message 0x%llx\n", + __func__, msg); + break; + } +} + +static void adjust_rcvctrl(struct hfi1_devdata *dd, u64 add, u64 clear) +{ + u64 rcvctrl; + unsigned long flags; + + spin_lock_irqsave(&dd->rcvctrl_lock, flags); + rcvctrl = read_csr(dd, RCV_CTRL); + rcvctrl |= add; + rcvctrl &= ~clear; + write_csr(dd, RCV_CTRL, rcvctrl); + spin_unlock_irqrestore(&dd->rcvctrl_lock, flags); +} + +static inline void add_rcvctrl(struct hfi1_devdata *dd, u64 add) +{ + adjust_rcvctrl(dd, add, 0); +} + +static inline void clear_rcvctrl(struct hfi1_devdata *dd, u64 clear) +{ + adjust_rcvctrl(dd, 0, clear); +} + +/* + * Called from all interrupt handlers to start handling an SPC freeze. + */ +void start_freeze_handling(struct hfi1_pportdata *ppd, int flags) +{ + struct hfi1_devdata *dd = ppd->dd; + struct send_context *sc; + int i; + + if (flags & FREEZE_SELF) + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_FREEZE_SMASK); + + /* enter frozen mode */ + dd->flags |= HFI1_FROZEN; + + /* notify all SDMA engines that they are going into a freeze */ + sdma_freeze_notify(dd, !!(flags & FREEZE_LINK_DOWN)); + + /* do halt pre-handling on all enabled send contexts */ + for (i = 0; i < dd->num_send_contexts; i++) { + sc = dd->send_contexts[i].sc; + if (sc && (sc->flags & SCF_ENABLED)) + sc_stop(sc, SCF_FROZEN | SCF_HALTED); + } + + /* Send context are frozen. Notify user space */ + hfi1_set_uevent_bits(ppd, _HFI1_EVENT_FROZEN_BIT); + + if (flags & FREEZE_ABORT) { + dd_dev_err(dd, + "Aborted freeze recovery. Please REBOOT system\n"); + return; + } + /* queue non-interrupt handler */ + queue_work(ppd->hfi1_wq, &ppd->freeze_work); +} + +/* + * Wait until all 4 sub-blocks indicate that they have frozen or unfrozen, + * depending on the "freeze" parameter. + * + * No need to return an error if it times out, our only option + * is to proceed anyway. + */ +static void wait_for_freeze_status(struct hfi1_devdata *dd, int freeze) +{ + unsigned long timeout; + u64 reg; + + timeout = jiffies + msecs_to_jiffies(FREEZE_STATUS_TIMEOUT); + while (1) { + reg = read_csr(dd, CCE_STATUS); + if (freeze) { + /* waiting until all indicators are set */ + if ((reg & ALL_FROZE) == ALL_FROZE) + return; /* all done */ + } else { + /* waiting until all indicators are clear */ + if ((reg & ALL_FROZE) == 0) + return; /* all done */ + } + + if (time_after(jiffies, timeout)) { + dd_dev_err(dd, + "Time out waiting for SPC %sfreeze, bits 0x%llx, expecting 0x%llx, continuing", + freeze ? "" : "un", + reg & ALL_FROZE, + freeze ? ALL_FROZE : 0ull); + return; + } + usleep_range(80, 120); + } +} + +/* + * Do all freeze handling for the RXE block. + */ +static void rxe_freeze(struct hfi1_devdata *dd) +{ + int i; + + /* disable port */ + clear_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); + + /* disable all receive contexts */ + for (i = 0; i < dd->num_rcv_contexts; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS, i); +} + +/* + * Unfreeze handling for the RXE block - kernel contexts only. + * This will also enable the port. User contexts will do unfreeze + * handling on a per-context basis as they call into the driver. + * + */ +static void rxe_kernel_unfreeze(struct hfi1_devdata *dd) +{ + int i; + + /* enable all kernel contexts */ + for (i = 0; i < dd->n_krcv_queues; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_ENB, i); + + /* enable port */ + add_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); +} + +/* + * Non-interrupt SPC freeze handling. + * + * This is a work-queue function outside of the triggering interrupt. + */ +void handle_freeze(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + freeze_work); + struct hfi1_devdata *dd = ppd->dd; + + /* wait for freeze indicators on all affected blocks */ + dd_dev_info(dd, "Entering SPC freeze\n"); + wait_for_freeze_status(dd, 1); + + /* SPC is now frozen */ + + /* do send PIO freeze steps */ + pio_freeze(dd); + + /* do send DMA freeze steps */ + sdma_freeze(dd); + + /* do send egress freeze steps - nothing to do */ + + /* do receive freeze steps */ + rxe_freeze(dd); + + /* + * Unfreeze the hardware - clear the freeze, wait for each + * block's frozen bit to clear, then clear the frozen flag. + */ + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_UNFREEZE_SMASK); + wait_for_freeze_status(dd, 0); + + if (is_a0(dd)) { + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_FREEZE_SMASK); + wait_for_freeze_status(dd, 1); + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_UNFREEZE_SMASK); + wait_for_freeze_status(dd, 0); + } + + /* do send PIO unfreeze steps for kernel contexts */ + pio_kernel_unfreeze(dd); + + /* do send DMA unfreeze steps */ + sdma_unfreeze(dd); + + /* do send egress unfreeze steps - nothing to do */ + + /* do receive unfreeze steps for kernel contexts */ + rxe_kernel_unfreeze(dd); + + /* + * The unfreeze procedure touches global device registers when + * it disables and re-enables RXE. Mark the device unfrozen + * after all that is done so other parts of the driver waiting + * for the device to unfreeze don't do things out of order. + * + * The above implies that the meaning of HFI1_FROZEN flag is + * "Device has gone into freeze mode and freeze mode handling + * is still in progress." + * + * The flag will be removed when freeze mode processing has + * completed. + */ + dd->flags &= ~HFI1_FROZEN; + wake_up(&dd->event_queue); + + /* no longer frozen */ + dd_dev_err(dd, "Exiting SPC freeze\n"); +} + +/* + * Handle a link up interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_up(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_up_work); + set_link_state(ppd, HLS_UP_INIT); + + /* cache the read of DC_LCB_STS_ROUND_TRIP_LTP_CNT */ + read_ltp_rtt(ppd->dd); + /* + * OPA specifies that certain counters are cleared on a transition + * to link up, so do that. + */ + clear_linkup_counters(ppd->dd); + /* + * And (re)set link up default values. + */ + set_linkup_defaults(ppd); + + /* enforce link speed enabled */ + if ((ppd->link_speed_active & ppd->link_speed_enabled) == 0) { + /* oops - current speed is not enabled, bounce */ + dd_dev_err(ppd->dd, + "Link speed active 0x%x is outside enabled 0x%x, downing link\n", + ppd->link_speed_active, ppd->link_speed_enabled); + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SPEED_POLICY, 0, + OPA_LINKDOWN_REASON_SPEED_POLICY); + set_link_state(ppd, HLS_DN_OFFLINE); + start_link(ppd); + } +} + +/* Several pieces of LNI information were cached for SMA in ppd. + * Reset these on link down */ +static void reset_neighbor_info(struct hfi1_pportdata *ppd) +{ + ppd->neighbor_guid = 0; + ppd->neighbor_port_number = 0; + ppd->neighbor_type = 0; + ppd->neighbor_fm_security = 0; +} + +/* + * Handle a link down interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_down(struct work_struct *work) +{ + u8 lcl_reason, neigh_reason = 0; + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_down_work); + + /* go offline first, then deal with reasons */ + set_link_state(ppd, HLS_DN_OFFLINE); + + lcl_reason = 0; + read_planned_down_reason_code(ppd->dd, &neigh_reason); + + /* + * If no reason, assume peer-initiated but missed + * LinkGoingDown idle flits. + */ + if (neigh_reason == 0) + lcl_reason = OPA_LINKDOWN_REASON_NEIGHBOR_UNKNOWN; + + set_link_down_reason(ppd, lcl_reason, neigh_reason, 0); + + reset_neighbor_info(ppd); + + /* disable the port */ + clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); + + /* If there is no cable attached, turn the DC off. Otherwise, + * start the link bring up. */ + if (!qsfp_mod_present(ppd)) + dc_shutdown(ppd->dd); + else + start_link(ppd); +} + +void handle_link_bounce(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_bounce_work); + + /* + * Only do something if the link is currently up. + */ + if (ppd->host_link_state & HLS_UP) { + set_link_state(ppd, HLS_DN_OFFLINE); + start_link(ppd); + } else { + dd_dev_info(ppd->dd, "%s: link not up (%s), nothing to do\n", + __func__, link_state_name(ppd->host_link_state)); + } +} + +/* + * Mask conversion: Capability exchange to Port LTP. The capability + * exchange has an implicit 16b CRC that is mandatory. + */ +static int cap_to_port_ltp(int cap) +{ + int port_ltp = PORT_LTP_CRC_MODE_16; /* this mode is mandatory */ + + if (cap & CAP_CRC_14B) + port_ltp |= PORT_LTP_CRC_MODE_14; + if (cap & CAP_CRC_48B) + port_ltp |= PORT_LTP_CRC_MODE_48; + if (cap & CAP_CRC_12B_16B_PER_LANE) + port_ltp |= PORT_LTP_CRC_MODE_PER_LANE; + + return port_ltp; +} + +/* + * Convert an OPA Port LTP mask to capability mask + */ +int port_ltp_to_cap(int port_ltp) +{ + int cap_mask = 0; + + if (port_ltp & PORT_LTP_CRC_MODE_14) + cap_mask |= CAP_CRC_14B; + if (port_ltp & PORT_LTP_CRC_MODE_48) + cap_mask |= CAP_CRC_48B; + if (port_ltp & PORT_LTP_CRC_MODE_PER_LANE) + cap_mask |= CAP_CRC_12B_16B_PER_LANE; + + return cap_mask; +} + +/* + * Convert a single DC LCB CRC mode to an OPA Port LTP mask. + */ +static int lcb_to_port_ltp(int lcb_crc) +{ + int port_ltp = 0; + + if (lcb_crc == LCB_CRC_12B_16B_PER_LANE) + port_ltp = PORT_LTP_CRC_MODE_PER_LANE; + else if (lcb_crc == LCB_CRC_48B) + port_ltp = PORT_LTP_CRC_MODE_48; + else if (lcb_crc == LCB_CRC_14B) + port_ltp = PORT_LTP_CRC_MODE_14; + else + port_ltp = PORT_LTP_CRC_MODE_16; + + return port_ltp; +} + +/* + * Our neighbor has indicated that we are allowed to act as a fabric + * manager, so place the full management partition key in the second + * (0-based) pkey array position (see OPAv1, section 20.2.2.6.8). Note + * that we should already have the limited management partition key in + * array element 1, and also that the port is not yet up when + * add_full_mgmt_pkey() is invoked. + */ +static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + + /* Sanity check - ppd->pkeys[2] should be 0 */ + if (ppd->pkeys[2] != 0) + dd_dev_err(dd, "%s pkey[2] already set to 0x%x, resetting it to 0x%x\n", + __func__, ppd->pkeys[2], FULL_MGMT_P_KEY); + ppd->pkeys[2] = FULL_MGMT_P_KEY; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); +} + +/* + * Convert the given link width to the OPA link width bitmask. + */ +static u16 link_width_to_bits(struct hfi1_devdata *dd, u16 width) +{ + switch (width) { + case 0: + /* + * Simulator and quick linkup do not set the width. + * Just set it to 4x without complaint. + */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR || quick_linkup) + return OPA_LINK_WIDTH_4X; + return 0; /* no lanes up */ + case 1: return OPA_LINK_WIDTH_1X; + case 2: return OPA_LINK_WIDTH_2X; + case 3: return OPA_LINK_WIDTH_3X; + default: + dd_dev_info(dd, "%s: invalid width %d, using 4\n", + __func__, width); + /* fall through */ + case 4: return OPA_LINK_WIDTH_4X; + } +} + +/* + * Do a population count on the bottom nibble. + */ +static const u8 bit_counts[16] = { + 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4 +}; +static inline u8 nibble_to_count(u8 nibble) +{ + return bit_counts[nibble & 0xf]; +} + +/* + * Read the active lane information from the 8051 registers and return + * their widths. + * + * Active lane information is found in these 8051 registers: + * enable_lane_tx + * enable_lane_rx + */ +static void get_link_widths(struct hfi1_devdata *dd, u16 *tx_width, + u16 *rx_width) +{ + u16 tx, rx; + u8 enable_lane_rx; + u8 enable_lane_tx; + u8 tx_polarity_inversion; + u8 rx_polarity_inversion; + u8 max_rate; + + /* read the active lanes */ + read_tx_settings(dd, &enable_lane_tx, &tx_polarity_inversion, + &rx_polarity_inversion, &max_rate); + read_local_lni(dd, &enable_lane_rx); + + /* convert to counts */ + tx = nibble_to_count(enable_lane_tx); + rx = nibble_to_count(enable_lane_rx); + + /* + * Set link_speed_active here, overriding what was set in + * handle_verify_cap(). The ASIC 8051 firmware does not correctly + * set the max_rate field in handle_verify_cap until v0.19. + */ + if ((dd->icode == ICODE_RTL_SILICON) + && (dd->dc8051_ver < dc8051_ver(0, 19))) { + /* max_rate: 0 = 12.5G, 1 = 25G */ + switch (max_rate) { + case 0: + dd->pport[0].link_speed_active = OPA_LINK_SPEED_12_5G; + break; + default: + dd_dev_err(dd, + "%s: unexpected max rate %d, using 25Gb\n", + __func__, (int)max_rate); + /* fall through */ + case 1: + dd->pport[0].link_speed_active = OPA_LINK_SPEED_25G; + break; + } + } + + dd_dev_info(dd, + "Fabric active lanes (width): tx 0x%x (%d), rx 0x%x (%d)\n", + enable_lane_tx, tx, enable_lane_rx, rx); + *tx_width = link_width_to_bits(dd, tx); + *rx_width = link_width_to_bits(dd, rx); +} + +/* + * Read verify_cap_local_fm_link_width[1] to obtain the link widths. + * Valid after the end of VerifyCap and during LinkUp. Does not change + * after link up. I.e. look elsewhere for downgrade information. + * + * Bits are: + * + bits [7:4] contain the number of active transmitters + * + bits [3:0] contain the number of active receivers + * These are numbers 1 through 4 and can be different values if the + * link is asymmetric. + * + * verify_cap_local_fm_link_width[0] retains its original value. + */ +static void get_linkup_widths(struct hfi1_devdata *dd, u16 *tx_width, + u16 *rx_width) +{ + u16 widths, tx, rx; + u8 misc_bits, local_flags; + u16 active_tx, active_rx; + + read_vc_local_link_width(dd, &misc_bits, &local_flags, &widths); + tx = widths >> 12; + rx = (widths >> 8) & 0xf; + + *tx_width = link_width_to_bits(dd, tx); + *rx_width = link_width_to_bits(dd, rx); + + /* print the active widths */ + get_link_widths(dd, &active_tx, &active_rx); +} + +/* + * Set ppd->link_width_active and ppd->link_width_downgrade_active using + * hardware information when the link first comes up. + * + * The link width is not available until after VerifyCap.AllFramesReceived + * (the trigger for handle_verify_cap), so this is outside that routine + * and should be called when the 8051 signals linkup. + */ +void get_linkup_link_widths(struct hfi1_pportdata *ppd) +{ + u16 tx_width, rx_width; + + /* get end-of-LNI link widths */ + get_linkup_widths(ppd->dd, &tx_width, &rx_width); + + /* use tx_width as the link is supposed to be symmetric on link up */ + ppd->link_width_active = tx_width; + /* link width downgrade active (LWD.A) starts out matching LW.A */ + ppd->link_width_downgrade_tx_active = ppd->link_width_active; + ppd->link_width_downgrade_rx_active = ppd->link_width_active; + /* per OPA spec, on link up LWD.E resets to LWD.S */ + ppd->link_width_downgrade_enabled = ppd->link_width_downgrade_supported; + /* cache the active egress rate (units {10^6 bits/sec]) */ + ppd->current_egress_rate = active_egress_rate(ppd); +} + +/* + * Handle a verify capabilities interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_verify_cap(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_vc_work); + struct hfi1_devdata *dd = ppd->dd; + u64 reg; + u8 power_management; + u8 continious; + u8 vcu; + u8 vau; + u8 z; + u16 vl15buf; + u16 link_widths; + u16 crc_mask; + u16 crc_val; + u16 device_id; + u16 active_tx, active_rx; + u8 partner_supported_crc; + u8 remote_tx_rate; + u8 device_rev; + + set_link_state(ppd, HLS_VERIFY_CAP); + + lcb_shutdown(dd, 0); + adjust_lcb_for_fpga_serdes(dd); + + /* + * These are now valid: + * remote VerifyCap fields in the general LNI config + * CSR DC8051_STS_REMOTE_GUID + * CSR DC8051_STS_REMOTE_NODE_TYPE + * CSR DC8051_STS_REMOTE_FM_SECURITY + * CSR DC8051_STS_REMOTE_PORT_NO + */ + + read_vc_remote_phy(dd, &power_management, &continious); + read_vc_remote_fabric( + dd, + &vau, + &z, + &vcu, + &vl15buf, + &partner_supported_crc); + read_vc_remote_link_width(dd, &remote_tx_rate, &link_widths); + read_remote_device_id(dd, &device_id, &device_rev); + /* + * And the 'MgmtAllowed' information, which is exchanged during + * LNI, is also be available at this point. + */ + read_mgmt_allowed(dd, &ppd->mgmt_allowed); + /* print the active widths */ + get_link_widths(dd, &active_tx, &active_rx); + dd_dev_info(dd, + "Peer PHY: power management 0x%x, continuous updates 0x%x\n", + (int)power_management, (int)continious); + dd_dev_info(dd, + "Peer Fabric: vAU %d, Z %d, vCU %d, vl15 credits 0x%x, CRC sizes 0x%x\n", + (int)vau, + (int)z, + (int)vcu, + (int)vl15buf, + (int)partner_supported_crc); + dd_dev_info(dd, "Peer Link Width: tx rate 0x%x, widths 0x%x\n", + (u32)remote_tx_rate, (u32)link_widths); + dd_dev_info(dd, "Peer Device ID: 0x%04x, Revision 0x%02x\n", + (u32)device_id, (u32)device_rev); + /* + * The peer vAU value just read is the peer receiver value. HFI does + * not support a transmit vAU of 0 (AU == 8). We advertised that + * with Z=1 in the fabric capabilities sent to the peer. The peer + * will see our Z=1, and, if it advertised a vAU of 0, will move its + * receive to vAU of 1 (AU == 16). Do the same here. We do not care + * about the peer Z value - our sent vAU is 3 (hardwired) and is not + * subject to the Z value exception. + */ + if (vau == 0) + vau = 1; + set_up_vl15(dd, vau, vl15buf); + + /* set up the LCB CRC mode */ + crc_mask = ppd->port_crc_mode_enabled & partner_supported_crc; + + /* order is important: use the lowest bit in common */ + if (crc_mask & CAP_CRC_14B) + crc_val = LCB_CRC_14B; + else if (crc_mask & CAP_CRC_48B) + crc_val = LCB_CRC_48B; + else if (crc_mask & CAP_CRC_12B_16B_PER_LANE) + crc_val = LCB_CRC_12B_16B_PER_LANE; + else + crc_val = LCB_CRC_16B; + + dd_dev_info(dd, "Final LCB CRC mode: %d\n", (int)crc_val); + write_csr(dd, DC_LCB_CFG_CRC_MODE, + (u64)crc_val << DC_LCB_CFG_CRC_MODE_TX_VAL_SHIFT); + + /* set (14b only) or clear sideband credit */ + reg = read_csr(dd, SEND_CM_CTRL); + if (crc_val == LCB_CRC_14B && crc_14b_sideband) { + write_csr(dd, SEND_CM_CTRL, + reg | SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK); + } else { + write_csr(dd, SEND_CM_CTRL, + reg & ~SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK); + } + + ppd->link_speed_active = 0; /* invalid value */ + if (dd->dc8051_ver < dc8051_ver(0, 20)) { + /* remote_tx_rate: 0 = 12.5G, 1 = 25G */ + switch (remote_tx_rate) { + case 0: + ppd->link_speed_active = OPA_LINK_SPEED_12_5G; + break; + case 1: + ppd->link_speed_active = OPA_LINK_SPEED_25G; + break; + } + } else { + /* actual rate is highest bit of the ANDed rates */ + u8 rate = remote_tx_rate & ppd->local_tx_rate; + + if (rate & 2) + ppd->link_speed_active = OPA_LINK_SPEED_25G; + else if (rate & 1) + ppd->link_speed_active = OPA_LINK_SPEED_12_5G; + } + if (ppd->link_speed_active == 0) { + dd_dev_err(dd, "%s: unexpected remote tx rate %d, using 25Gb\n", + __func__, (int)remote_tx_rate); + ppd->link_speed_active = OPA_LINK_SPEED_25G; + } + + /* + * Cache the values of the supported, enabled, and active + * LTP CRC modes to return in 'portinfo' queries. But the bit + * flags that are returned in the portinfo query differ from + * what's in the link_crc_mask, crc_sizes, and crc_val + * variables. Convert these here. + */ + ppd->port_ltp_crc_mode = cap_to_port_ltp(link_crc_mask) << 8; + /* supported crc modes */ + ppd->port_ltp_crc_mode |= + cap_to_port_ltp(ppd->port_crc_mode_enabled) << 4; + /* enabled crc modes */ + ppd->port_ltp_crc_mode |= lcb_to_port_ltp(crc_val); + /* active crc mode */ + + /* set up the remote credit return table */ + assign_remote_cm_au_table(dd, vcu); + + /* + * The LCB is reset on entry to handle_verify_cap(), so this must + * be applied on every link up. + * + * Adjust LCB error kill enable to kill the link if + * these RBUF errors are seen: + * REPLAY_BUF_MBE_SMASK + * FLIT_INPUT_BUF_MBE_SMASK + */ + if (is_a0(dd)) { /* fixed in B0 */ + reg = read_csr(dd, DC_LCB_CFG_LINK_KILL_EN); + reg |= DC_LCB_CFG_LINK_KILL_EN_REPLAY_BUF_MBE_SMASK + | DC_LCB_CFG_LINK_KILL_EN_FLIT_INPUT_BUF_MBE_SMASK; + write_csr(dd, DC_LCB_CFG_LINK_KILL_EN, reg); + } + + /* pull LCB fifos out of reset - all fifo clocks must be stable */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0); + + /* give 8051 access to the LCB CSRs */ + write_csr(dd, DC_LCB_ERR_EN, 0); /* mask LCB errors */ + set_8051_lcb_access(dd); + + ppd->neighbor_guid = + read_csr(dd, DC_DC8051_STS_REMOTE_GUID); + ppd->neighbor_port_number = read_csr(dd, DC_DC8051_STS_REMOTE_PORT_NO) & + DC_DC8051_STS_REMOTE_PORT_NO_VAL_SMASK; + ppd->neighbor_type = + read_csr(dd, DC_DC8051_STS_REMOTE_NODE_TYPE) & + DC_DC8051_STS_REMOTE_NODE_TYPE_VAL_MASK; + ppd->neighbor_fm_security = + read_csr(dd, DC_DC8051_STS_REMOTE_FM_SECURITY) & + DC_DC8051_STS_LOCAL_FM_SECURITY_DISABLED_MASK; + dd_dev_info(dd, + "Neighbor Guid: %llx Neighbor type %d MgmtAllowed %d FM security bypass %d\n", + ppd->neighbor_guid, ppd->neighbor_type, + ppd->mgmt_allowed, ppd->neighbor_fm_security); + if (ppd->mgmt_allowed) + add_full_mgmt_pkey(ppd); + + /* tell the 8051 to go to LinkUp */ + set_link_state(ppd, HLS_GOING_UP); +} + +/* + * Apply the link width downgrade enabled policy against the current active + * link widths. + * + * Called when the enabled policy changes or the active link widths change. + */ +void apply_link_downgrade_policy(struct hfi1_pportdata *ppd, int refresh_widths) +{ + int skip = 1; + int do_bounce = 0; + u16 lwde = ppd->link_width_downgrade_enabled; + u16 tx, rx; + + mutex_lock(&ppd->hls_lock); + /* only apply if the link is up */ + if (ppd->host_link_state & HLS_UP) + skip = 0; + mutex_unlock(&ppd->hls_lock); + if (skip) + return; + + if (refresh_widths) { + get_link_widths(ppd->dd, &tx, &rx); + ppd->link_width_downgrade_tx_active = tx; + ppd->link_width_downgrade_rx_active = rx; + } + + if (lwde == 0) { + /* downgrade is disabled */ + + /* bounce if not at starting active width */ + if ((ppd->link_width_active != + ppd->link_width_downgrade_tx_active) + || (ppd->link_width_active != + ppd->link_width_downgrade_rx_active)) { + dd_dev_err(ppd->dd, + "Link downgrade is disabled and link has downgraded, downing link\n"); + dd_dev_err(ppd->dd, + " original 0x%x, tx active 0x%x, rx active 0x%x\n", + ppd->link_width_active, + ppd->link_width_downgrade_tx_active, + ppd->link_width_downgrade_rx_active); + do_bounce = 1; + } + } else if ((lwde & ppd->link_width_downgrade_tx_active) == 0 + || (lwde & ppd->link_width_downgrade_rx_active) == 0) { + /* Tx or Rx is outside the enabled policy */ + dd_dev_err(ppd->dd, + "Link is outside of downgrade allowed, downing link\n"); + dd_dev_err(ppd->dd, + " enabled 0x%x, tx active 0x%x, rx active 0x%x\n", + lwde, + ppd->link_width_downgrade_tx_active, + ppd->link_width_downgrade_rx_active); + do_bounce = 1; + } + + if (do_bounce) { + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_WIDTH_POLICY, 0, + OPA_LINKDOWN_REASON_WIDTH_POLICY); + set_link_state(ppd, HLS_DN_OFFLINE); + start_link(ppd); + } +} + +/* + * Handle a link downgrade interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_downgrade(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_downgrade_work); + + dd_dev_info(ppd->dd, "8051: Link width downgrade\n"); + apply_link_downgrade_policy(ppd, 1); +} + +static char *dcc_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dcc_err_flags, + ARRAY_SIZE(dcc_err_flags)); +} + +static char *lcb_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, lcb_err_flags, + ARRAY_SIZE(lcb_err_flags)); +} + +static char *dc8051_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_err_flags, + ARRAY_SIZE(dc8051_err_flags)); +} + +static char *dc8051_info_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_info_err_flags, + ARRAY_SIZE(dc8051_info_err_flags)); +} + +static char *dc8051_info_host_msg_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_info_host_msg_flags, + ARRAY_SIZE(dc8051_info_host_msg_flags)); +} + +static void handle_8051_interrupt(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + struct hfi1_pportdata *ppd = dd->pport; + u64 info, err, host_msg; + int queue_link_down = 0; + char buf[96]; + + /* look at the flags */ + if (reg & DC_DC8051_ERR_FLG_SET_BY_8051_SMASK) { + /* 8051 information set by firmware */ + /* read DC8051_DBG_ERR_INFO_SET_BY_8051 for details */ + info = read_csr(dd, DC_DC8051_DBG_ERR_INFO_SET_BY_8051); + err = (info >> DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_SHIFT) + & DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_MASK; + host_msg = (info >> + DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_SHIFT) + & DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_MASK; + + /* + * Handle error flags. + */ + if (err & FAILED_LNI) { + /* + * LNI error indications are cleared by the 8051 + * only when starting polling. Only pay attention + * to them when in the states that occur during + * LNI. + */ + if (ppd->host_link_state + & (HLS_DN_POLL | HLS_VERIFY_CAP | HLS_GOING_UP)) { + queue_link_down = 1; + dd_dev_info(dd, "Link error: %s\n", + dc8051_info_err_string(buf, + sizeof(buf), + err & FAILED_LNI)); + } + err &= ~(u64)FAILED_LNI; + } + if (err) { + /* report remaining errors, but do not do anything */ + dd_dev_err(dd, "8051 info error: %s\n", + dc8051_info_err_string(buf, sizeof(buf), err)); + } + + /* + * Handle host message flags. + */ + if (host_msg & HOST_REQ_DONE) { + /* + * Presently, the driver does a busy wait for + * host requests to complete. This is only an + * informational message. + * NOTE: The 8051 clears the host message + * information *on the next 8051 command*. + * Therefore, when linkup is achieved, + * this flag will still be set. + */ + host_msg &= ~(u64)HOST_REQ_DONE; + } + if (host_msg & BC_SMA_MSG) { + queue_work(ppd->hfi1_wq, &ppd->sma_message_work); + host_msg &= ~(u64)BC_SMA_MSG; + } + if (host_msg & LINKUP_ACHIEVED) { + dd_dev_info(dd, "8051: Link up\n"); + queue_work(ppd->hfi1_wq, &ppd->link_up_work); + host_msg &= ~(u64)LINKUP_ACHIEVED; + } + if (host_msg & EXT_DEVICE_CFG_REQ) { + handle_8051_request(dd); + host_msg &= ~(u64)EXT_DEVICE_CFG_REQ; + } + if (host_msg & VERIFY_CAP_FRAME) { + queue_work(ppd->hfi1_wq, &ppd->link_vc_work); + host_msg &= ~(u64)VERIFY_CAP_FRAME; + } + if (host_msg & LINK_GOING_DOWN) { + const char *extra = ""; + /* no downgrade action needed if going down */ + if (host_msg & LINK_WIDTH_DOWNGRADED) { + host_msg &= ~(u64)LINK_WIDTH_DOWNGRADED; + extra = " (ignoring downgrade)"; + } + dd_dev_info(dd, "8051: Link down%s\n", extra); + queue_link_down = 1; + host_msg &= ~(u64)LINK_GOING_DOWN; + } + if (host_msg & LINK_WIDTH_DOWNGRADED) { + queue_work(ppd->hfi1_wq, &ppd->link_downgrade_work); + host_msg &= ~(u64)LINK_WIDTH_DOWNGRADED; + } + if (host_msg) { + /* report remaining messages, but do not do anything */ + dd_dev_info(dd, "8051 info host message: %s\n", + dc8051_info_host_msg_string(buf, sizeof(buf), + host_msg)); + } + + reg &= ~DC_DC8051_ERR_FLG_SET_BY_8051_SMASK; + } + if (reg & DC_DC8051_ERR_FLG_LOST_8051_HEART_BEAT_SMASK) { + /* + * Lost the 8051 heartbeat. If this happens, we + * receive constant interrupts about it. Disable + * the interrupt after the first. + */ + dd_dev_err(dd, "Lost 8051 heartbeat\n"); + write_csr(dd, DC_DC8051_ERR_EN, + read_csr(dd, DC_DC8051_ERR_EN) + & ~DC_DC8051_ERR_EN_LOST_8051_HEART_BEAT_SMASK); + + reg &= ~DC_DC8051_ERR_FLG_LOST_8051_HEART_BEAT_SMASK; + } + if (reg) { + /* report the error, but do not do anything */ + dd_dev_err(dd, "8051 error: %s\n", + dc8051_err_string(buf, sizeof(buf), reg)); + } + + if (queue_link_down) { + /* if the link is already going down or disabled, do not + * queue another */ + if ((ppd->host_link_state + & (HLS_GOING_OFFLINE|HLS_LINK_COOLDOWN)) + || ppd->link_enabled == 0) { + dd_dev_info(dd, "%s: not queuing link down\n", + __func__); + } else { + queue_work(ppd->hfi1_wq, &ppd->link_down_work); + } + } +} + +static const char * const fm_config_txt[] = { +[0] = + "BadHeadDist: Distance violation between two head flits", +[1] = + "BadTailDist: Distance violation between two tail flits", +[2] = + "BadCtrlDist: Distance violation between two credit control flits", +[3] = + "BadCrdAck: Credits return for unsupported VL", +[4] = + "UnsupportedVLMarker: Received VL Marker", +[5] = + "BadPreempt: Exceeded the preemption nesting level", +[6] = + "BadControlFlit: Received unsupported control flit", +/* no 7 */ +[8] = + "UnsupportedVLMarker: Received VL Marker for unconfigured or disabled VL", +}; + +static const char * const port_rcv_txt[] = { +[1] = + "BadPktLen: Illegal PktLen", +[2] = + "PktLenTooLong: Packet longer than PktLen", +[3] = + "PktLenTooShort: Packet shorter than PktLen", +[4] = + "BadSLID: Illegal SLID (0, using multicast as SLID, does not include security validation of SLID)", +[5] = + "BadDLID: Illegal DLID (0, doesn't match HFI)", +[6] = + "BadL2: Illegal L2 opcode", +[7] = + "BadSC: Unsupported SC", +[9] = + "BadRC: Illegal RC", +[11] = + "PreemptError: Preempting with same VL", +[12] = + "PreemptVL15: Preempting a VL15 packet", +}; + +#define OPA_LDR_FMCONFIG_OFFSET 16 +#define OPA_LDR_PORTRCV_OFFSET 0 +static void handle_dcc_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + u64 info, hdr0, hdr1; + const char *extra; + char buf[96]; + struct hfi1_pportdata *ppd = dd->pport; + u8 lcl_reason = 0; + int do_bounce = 0; + + if (reg & DCC_ERR_FLG_UNCORRECTABLE_ERR_SMASK) { + if (!(dd->err_info_uncorrectable & OPA_EI_STATUS_SMASK)) { + info = read_csr(dd, DCC_ERR_INFO_UNCORRECTABLE); + dd->err_info_uncorrectable = info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_uncorrectable |= OPA_EI_STATUS_SMASK; + } + reg &= ~DCC_ERR_FLG_UNCORRECTABLE_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_LINK_ERR_SMASK) { + struct hfi1_pportdata *ppd = dd->pport; + /* this counter saturates at (2^32) - 1 */ + if (ppd->link_downed < (u32)UINT_MAX) + ppd->link_downed++; + reg &= ~DCC_ERR_FLG_LINK_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_FMCONFIG_ERR_SMASK) { + u8 reason_valid = 1; + + info = read_csr(dd, DCC_ERR_INFO_FMCONFIG); + if (!(dd->err_info_fmconfig & OPA_EI_STATUS_SMASK)) { + dd->err_info_fmconfig = info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_fmconfig |= OPA_EI_STATUS_SMASK; + } + switch (info) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + extra = fm_config_txt[info]; + break; + case 8: + extra = fm_config_txt[info]; + if (ppd->port_error_action & + OPA_PI_MASK_FM_CFG_UNSUPPORTED_VL_MARKER) { + do_bounce = 1; + /* + * lcl_reason cannot be derived from info + * for this error + */ + lcl_reason = + OPA_LINKDOWN_REASON_UNSUPPORTED_VL_MARKER; + } + break; + default: + reason_valid = 0; + snprintf(buf, sizeof(buf), "reserved%lld", info); + extra = buf; + break; + } + + if (reason_valid && !do_bounce) { + do_bounce = ppd->port_error_action & + (1 << (OPA_LDR_FMCONFIG_OFFSET + info)); + lcl_reason = info + OPA_LINKDOWN_REASON_BAD_HEAD_DIST; + } + + /* just report this */ + dd_dev_info(dd, "DCC Error: fmconfig error: %s\n", extra); + reg &= ~DCC_ERR_FLG_FMCONFIG_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_RCVPORT_ERR_SMASK) { + u8 reason_valid = 1; + + info = read_csr(dd, DCC_ERR_INFO_PORTRCV); + hdr0 = read_csr(dd, DCC_ERR_INFO_PORTRCV_HDR0); + hdr1 = read_csr(dd, DCC_ERR_INFO_PORTRCV_HDR1); + if (!(dd->err_info_rcvport.status_and_code & + OPA_EI_STATUS_SMASK)) { + dd->err_info_rcvport.status_and_code = + info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_rcvport.status_and_code |= + OPA_EI_STATUS_SMASK; + /* save first 2 flits in the packet that caused + * the error */ + dd->err_info_rcvport.packet_flit1 = hdr0; + dd->err_info_rcvport.packet_flit2 = hdr1; + } + switch (info) { + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + case 9: + case 11: + case 12: + extra = port_rcv_txt[info]; + break; + default: + reason_valid = 0; + snprintf(buf, sizeof(buf), "reserved%lld", info); + extra = buf; + break; + } + + if (reason_valid && !do_bounce) { + do_bounce = ppd->port_error_action & + (1 << (OPA_LDR_PORTRCV_OFFSET + info)); + lcl_reason = info + OPA_LINKDOWN_REASON_RCV_ERROR_0; + } + + /* just report this */ + dd_dev_info(dd, "DCC Error: PortRcv error: %s\n", extra); + dd_dev_info(dd, " hdr0 0x%llx, hdr1 0x%llx\n", + hdr0, hdr1); + + reg &= ~DCC_ERR_FLG_RCVPORT_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_UC_SMASK) { + /* informative only */ + dd_dev_info(dd, "8051 access to LCB blocked\n"); + reg &= ~DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_UC_SMASK; + } + if (reg & DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_HOST_SMASK) { + /* informative only */ + dd_dev_info(dd, "host access to LCB blocked\n"); + reg &= ~DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_HOST_SMASK; + } + + /* report any remaining errors */ + if (reg) + dd_dev_info(dd, "DCC Error: %s\n", + dcc_err_string(buf, sizeof(buf), reg)); + + if (lcl_reason == 0) + lcl_reason = OPA_LINKDOWN_REASON_UNKNOWN; + + if (do_bounce) { + dd_dev_info(dd, "%s: PortErrorAction bounce\n", __func__); + set_link_down_reason(ppd, lcl_reason, 0, lcl_reason); + queue_work(ppd->hfi1_wq, &ppd->link_bounce_work); + } +} + +static void handle_lcb_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "LCB Error: %s\n", + lcb_err_string(buf, sizeof(buf), reg)); +} + +/* + * CCE block DC interrupt. Source is < 8. + */ +static void is_dc_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &dc_errs[source]; + + if (eri->handler) { + interrupt_clear_down(dd, 0, eri); + } else if (source == 3 /* dc_lbm_int */) { + /* + * This indicates that a parity error has occurred on the + * address/control lines presented to the LBM. The error + * is a single pulse, there is no associated error flag, + * and it is non-maskable. This is because if a parity + * error occurs on the request the request is dropped. + * This should never occur, but it is nice to know if it + * ever does. + */ + dd_dev_err(dd, "Parity error in DC LBM block\n"); + } else { + dd_dev_err(dd, "Invalid DC interrupt %u\n", source); + } +} + +/* + * TX block send credit interrupt. Source is < 160. + */ +static void is_send_credit_int(struct hfi1_devdata *dd, unsigned int source) +{ + sc_group_release_update(dd, source); +} + +/* + * TX block SDMA interrupt. Source is < 48. + * + * SDMA interrupts are grouped by type: + * + * 0 - N-1 = SDma + * N - 2N-1 = SDmaProgress + * 2N - 3N-1 = SDmaIdle + */ +static void is_sdma_eng_int(struct hfi1_devdata *dd, unsigned int source) +{ + /* what interrupt */ + unsigned int what = source / TXE_NUM_SDMA_ENGINES; + /* which engine */ + unsigned int which = source % TXE_NUM_SDMA_ENGINES; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", which, + slashstrip(__FILE__), __LINE__, __func__); + sdma_dumpstate(&dd->per_sdma[which]); +#endif + + if (likely(what < 3 && which < dd->num_sdma)) { + sdma_engine_interrupt(&dd->per_sdma[which], 1ull << source); + } else { + /* should not happen */ + dd_dev_err(dd, "Invalid SDMA interrupt 0x%x\n", source); + } +} + +/* + * RX block receive available interrupt. Source is < 160. + */ +static void is_rcv_avail_int(struct hfi1_devdata *dd, unsigned int source) +{ + struct hfi1_ctxtdata *rcd; + char *err_detail; + + if (likely(source < dd->num_rcv_contexts)) { + rcd = dd->rcd[source]; + if (rcd) { + if (source < dd->first_user_ctxt) + rcd->do_interrupt(rcd); + else + handle_user_interrupt(rcd); + return; /* OK */ + } + /* received an interrupt, but no rcd */ + err_detail = "dataless"; + } else { + /* received an interrupt, but are not using that context */ + err_detail = "out of range"; + } + dd_dev_err(dd, "unexpected %s receive available context interrupt %u\n", + err_detail, source); +} + +/* + * RX block receive urgent interrupt. Source is < 160. + */ +static void is_rcv_urgent_int(struct hfi1_devdata *dd, unsigned int source) +{ + struct hfi1_ctxtdata *rcd; + char *err_detail; + + if (likely(source < dd->num_rcv_contexts)) { + rcd = dd->rcd[source]; + if (rcd) { + /* only pay attention to user urgent interrupts */ + if (source >= dd->first_user_ctxt) + handle_user_interrupt(rcd); + return; /* OK */ + } + /* received an interrupt, but no rcd */ + err_detail = "dataless"; + } else { + /* received an interrupt, but are not using that context */ + err_detail = "out of range"; + } + dd_dev_err(dd, "unexpected %s receive urgent context interrupt %u\n", + err_detail, source); +} + +/* + * Reserved range interrupt. Should not be called in normal operation. + */ +static void is_reserved_int(struct hfi1_devdata *dd, unsigned int source) +{ + char name[64]; + + dd_dev_err(dd, "unexpected %s interrupt\n", + is_reserved_name(name, sizeof(name), source)); +} + +static const struct is_table is_table[] = { +/* start end + name func interrupt func */ +{ IS_GENERAL_ERR_START, IS_GENERAL_ERR_END, + is_misc_err_name, is_misc_err_int }, +{ IS_SDMAENG_ERR_START, IS_SDMAENG_ERR_END, + is_sdma_eng_err_name, is_sdma_eng_err_int }, +{ IS_SENDCTXT_ERR_START, IS_SENDCTXT_ERR_END, + is_sendctxt_err_name, is_sendctxt_err_int }, +{ IS_SDMA_START, IS_SDMA_END, + is_sdma_eng_name, is_sdma_eng_int }, +{ IS_VARIOUS_START, IS_VARIOUS_END, + is_various_name, is_various_int }, +{ IS_DC_START, IS_DC_END, + is_dc_name, is_dc_int }, +{ IS_RCVAVAIL_START, IS_RCVAVAIL_END, + is_rcv_avail_name, is_rcv_avail_int }, +{ IS_RCVURGENT_START, IS_RCVURGENT_END, + is_rcv_urgent_name, is_rcv_urgent_int }, +{ IS_SENDCREDIT_START, IS_SENDCREDIT_END, + is_send_credit_name, is_send_credit_int}, +{ IS_RESERVED_START, IS_RESERVED_END, + is_reserved_name, is_reserved_int}, +}; + +/* + * Interrupt source interrupt - called when the given source has an interrupt. + * Source is a bit index into an array of 64-bit integers. + */ +static void is_interrupt(struct hfi1_devdata *dd, unsigned int source) +{ + const struct is_table *entry; + + /* avoids a double compare by walking the table in-order */ + for (entry = &is_table[0]; entry->is_name; entry++) { + if (source < entry->end) { + trace_hfi1_interrupt(dd, entry, source); + entry->is_int(dd, source - entry->start); + return; + } + } + /* fell off the end */ + dd_dev_err(dd, "invalid interrupt source %u\n", source); +} + +/* + * General interrupt handler. This is able to correctly handle + * all interrupts in case INTx is used. + */ +static irqreturn_t general_interrupt(int irq, void *data) +{ + struct hfi1_devdata *dd = data; + u64 regs[CCE_NUM_INT_CSRS]; + u32 bit; + int i; + + this_cpu_inc(*dd->int_counter); + + /* phase 1: scan and clear all handled interrupts */ + for (i = 0; i < CCE_NUM_INT_CSRS; i++) { + if (dd->gi_mask[i] == 0) { + regs[i] = 0; /* used later */ + continue; + } + regs[i] = read_csr(dd, CCE_INT_STATUS + (8 * i)) & + dd->gi_mask[i]; + /* only clear if anything is set */ + if (regs[i]) + write_csr(dd, CCE_INT_CLEAR + (8 * i), regs[i]); + } + + /* phase 2: call the appropriate handler */ + for_each_set_bit(bit, (unsigned long *)®s[0], + CCE_NUM_INT_CSRS*64) { + is_interrupt(dd, bit); + } + + return IRQ_HANDLED; +} + +static irqreturn_t sdma_interrupt(int irq, void *data) +{ + struct sdma_engine *sde = data; + struct hfi1_devdata *dd = sde->dd; + u64 status; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + sdma_dumpstate(sde); +#endif + + this_cpu_inc(*dd->int_counter); + + /* This read_csr is really bad in the hot path */ + status = read_csr(dd, + CCE_INT_STATUS + (8*(IS_SDMA_START/64))) + & sde->imask; + if (likely(status)) { + /* clear the interrupt(s) */ + write_csr(dd, + CCE_INT_CLEAR + (8*(IS_SDMA_START/64)), + status); + + /* handle the interrupt(s) */ + sdma_engine_interrupt(sde, status); + } else + dd_dev_err(dd, "SDMA engine %u interrupt, but no status bits set\n", + sde->this_idx); + + return IRQ_HANDLED; +} + +/* + * NOTE: this routine expects to be on its own MSI-X interrupt. If + * multiple receive contexts share the same MSI-X interrupt, then this + * routine must check for who received it. + */ +static irqreturn_t receive_context_interrupt(int irq, void *data) +{ + struct hfi1_ctxtdata *rcd = data; + struct hfi1_devdata *dd = rcd->dd; + + trace_hfi1_receive_interrupt(dd, rcd->ctxt); + this_cpu_inc(*dd->int_counter); + + /* clear the interrupt */ + write_csr(rcd->dd, CCE_INT_CLEAR + (8*rcd->ireg), rcd->imask); + + /* handle the interrupt */ + rcd->do_interrupt(rcd); + + return IRQ_HANDLED; +} + +/* ========================================================================= */ + +u32 read_physical_state(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = read_csr(dd, DC_DC8051_STS_CUR_STATE); + return (reg >> DC_DC8051_STS_CUR_STATE_PORT_SHIFT) + & DC_DC8051_STS_CUR_STATE_PORT_MASK; +} + +static u32 read_logical_state(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = read_csr(dd, DCC_CFG_PORT_CONFIG); + return (reg >> DCC_CFG_PORT_CONFIG_LINK_STATE_SHIFT) + & DCC_CFG_PORT_CONFIG_LINK_STATE_MASK; +} + +static void set_logical_state(struct hfi1_devdata *dd, u32 chip_lstate) +{ + u64 reg; + + reg = read_csr(dd, DCC_CFG_PORT_CONFIG); + /* clear current state, set new state */ + reg &= ~DCC_CFG_PORT_CONFIG_LINK_STATE_SMASK; + reg |= (u64)chip_lstate << DCC_CFG_PORT_CONFIG_LINK_STATE_SHIFT; + write_csr(dd, DCC_CFG_PORT_CONFIG, reg); +} + +/* + * Use the 8051 to read a LCB CSR. + */ +static int read_lcb_via_8051(struct hfi1_devdata *dd, u32 addr, u64 *data) +{ + u32 regno; + int ret; + + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + if (acquire_lcb_access(dd, 0) == 0) { + *data = read_csr(dd, addr); + release_lcb_access(dd, 0); + return 0; + } + return -EBUSY; + } + + /* register is an index of LCB registers: (offset - base) / 8 */ + regno = (addr - DC_LCB_CFG_RUN) >> 3; + ret = do_8051_command(dd, HCMD_READ_LCB_CSR, regno, data); + if (ret != HCMD_SUCCESS) + return -EBUSY; + return 0; +} + +/* + * Read an LCB CSR. Access may not be in host control, so check. + * Return 0 on success, -EBUSY on failure. + */ +int read_lcb_csr(struct hfi1_devdata *dd, u32 addr, u64 *data) +{ + struct hfi1_pportdata *ppd = dd->pport; + + /* if up, go through the 8051 for the value */ + if (ppd->host_link_state & HLS_UP) + return read_lcb_via_8051(dd, addr, data); + /* if going up or down, no access */ + if (ppd->host_link_state & (HLS_GOING_UP | HLS_GOING_OFFLINE)) + return -EBUSY; + /* otherwise, host has access */ + *data = read_csr(dd, addr); + return 0; +} + +/* + * Use the 8051 to write a LCB CSR. + */ +static int write_lcb_via_8051(struct hfi1_devdata *dd, u32 addr, u64 data) +{ + + if (acquire_lcb_access(dd, 0) == 0) { + write_csr(dd, addr, data); + release_lcb_access(dd, 0); + return 0; + } + return -EBUSY; +} + +/* + * Write an LCB CSR. Access may not be in host control, so check. + * Return 0 on success, -EBUSY on failure. + */ +int write_lcb_csr(struct hfi1_devdata *dd, u32 addr, u64 data) +{ + struct hfi1_pportdata *ppd = dd->pport; + + /* if up, go through the 8051 for the value */ + if (ppd->host_link_state & HLS_UP) + return write_lcb_via_8051(dd, addr, data); + /* if going up or down, no access */ + if (ppd->host_link_state & (HLS_GOING_UP | HLS_GOING_OFFLINE)) + return -EBUSY; + /* otherwise, host has access */ + write_csr(dd, addr, data); + return 0; +} + +/* + * Returns: + * < 0 = Linux error, not able to get access + * > 0 = 8051 command RETURN_CODE + */ +static int do_8051_command( + struct hfi1_devdata *dd, + u32 type, + u64 in_data, + u64 *out_data) +{ + u64 reg, completed; + int return_code; + unsigned long flags; + unsigned long timeout; + + hfi1_cdbg(DC8051, "type %d, data 0x%012llx", type, in_data); + + /* + * Alternative to holding the lock for a long time: + * - keep busy wait - have other users bounce off + */ + spin_lock_irqsave(&dd->dc8051_lock, flags); + + /* We can't send any commands to the 8051 if it's in reset */ + if (dd->dc_shutdown) { + return_code = -ENODEV; + goto fail; + } + + /* + * If an 8051 host command timed out previously, then the 8051 is + * stuck. + * + * On first timeout, attempt to reset and restart the entire DC + * block (including 8051). (Is this too big of a hammer?) + * + * If the 8051 times out a second time, the reset did not bring it + * back to healthy life. In that case, fail any subsequent commands. + */ + if (dd->dc8051_timed_out) { + if (dd->dc8051_timed_out > 1) { + dd_dev_err(dd, + "Previous 8051 host command timed out, skipping command %u\n", + type); + return_code = -ENXIO; + goto fail; + } + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + dc_shutdown(dd); + dc_start(dd); + spin_lock_irqsave(&dd->dc8051_lock, flags); + } + + /* + * If there is no timeout, then the 8051 command interface is + * waiting for a command. + */ + + /* + * Do two writes: the first to stabilize the type and req_data, the + * second to activate. + */ + reg = ((u64)type & DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_MASK) + << DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_SHIFT + | (in_data & DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_MASK) + << DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_SHIFT; + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, reg); + reg |= DC_DC8051_CFG_HOST_CMD_0_REQ_NEW_SMASK; + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, reg); + + /* wait for completion, alternate: interrupt */ + timeout = jiffies + msecs_to_jiffies(DC8051_COMMAND_TIMEOUT); + while (1) { + reg = read_csr(dd, DC_DC8051_CFG_HOST_CMD_1); + completed = reg & DC_DC8051_CFG_HOST_CMD_1_COMPLETED_SMASK; + if (completed) + break; + if (time_after(jiffies, timeout)) { + dd->dc8051_timed_out++; + dd_dev_err(dd, "8051 host command %u timeout\n", type); + if (out_data) + *out_data = 0; + return_code = -ETIMEDOUT; + goto fail; + } + udelay(2); + } + + if (out_data) { + *out_data = (reg >> DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_SHIFT) + & DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_MASK; + if (type == HCMD_READ_LCB_CSR) { + /* top 16 bits are in a different register */ + *out_data |= (read_csr(dd, DC_DC8051_CFG_EXT_DEV_1) + & DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SMASK) + << (48 + - DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SHIFT); + } + } + return_code = (reg >> DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_SHIFT) + & DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_MASK; + dd->dc8051_timed_out = 0; + /* + * Clear command for next user. + */ + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, 0); + +fail: + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + + return return_code; +} + +static int set_physical_link_state(struct hfi1_devdata *dd, u64 state) +{ + return do_8051_command(dd, HCMD_CHANGE_PHY_STATE, state, NULL); +} + +static int load_8051_config(struct hfi1_devdata *dd, u8 field_id, + u8 lane_id, u32 config_data) +{ + u64 data; + int ret; + + data = (u64)field_id << LOAD_DATA_FIELD_ID_SHIFT + | (u64)lane_id << LOAD_DATA_LANE_ID_SHIFT + | (u64)config_data << LOAD_DATA_DATA_SHIFT; + ret = do_8051_command(dd, HCMD_LOAD_CONFIG_DATA, data, NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, + "load 8051 config: field id %d, lane %d, err %d\n", + (int)field_id, (int)lane_id, ret); + } + return ret; +} + +/* + * Read the 8051 firmware "registers". Use the RAM directly. Always + * set the result, even on error. + * Return 0 on success, -errno on failure + */ +static int read_8051_config(struct hfi1_devdata *dd, u8 field_id, u8 lane_id, + u32 *result) +{ + u64 big_data; + u32 addr; + int ret; + + /* address start depends on the lane_id */ + if (lane_id < 4) + addr = (4 * NUM_GENERAL_FIELDS) + + (lane_id * 4 * NUM_LANE_FIELDS); + else + addr = 0; + addr += field_id * 4; + + /* read is in 8-byte chunks, hardware will truncate the address down */ + ret = read_8051_data(dd, addr, 8, &big_data); + + if (ret == 0) { + /* extract the 4 bytes we want */ + if (addr & 0x4) + *result = (u32)(big_data >> 32); + else + *result = (u32)big_data; + } else { + *result = 0; + dd_dev_err(dd, "%s: direct read failed, lane %d, field %d!\n", + __func__, lane_id, field_id); + } + + return ret; +} + +static int write_vc_local_phy(struct hfi1_devdata *dd, u8 power_management, + u8 continuous) +{ + u32 frame; + + frame = continuous << CONTINIOUS_REMOTE_UPDATE_SUPPORT_SHIFT + | power_management << POWER_MANAGEMENT_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_PHY, + GENERAL_CONFIG, frame); +} + +static int write_vc_local_fabric(struct hfi1_devdata *dd, u8 vau, u8 z, u8 vcu, + u16 vl15buf, u8 crc_sizes) +{ + u32 frame; + + frame = (u32)vau << VAU_SHIFT + | (u32)z << Z_SHIFT + | (u32)vcu << VCU_SHIFT + | (u32)vl15buf << VL15BUF_SHIFT + | (u32)crc_sizes << CRC_SIZES_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_FABRIC, + GENERAL_CONFIG, frame); +} + +static void read_vc_local_link_width(struct hfi1_devdata *dd, u8 *misc_bits, + u8 *flag_bits, u16 *link_widths) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_LOCAL_LINK_WIDTH, GENERAL_CONFIG, + &frame); + *misc_bits = (frame >> MISC_CONFIG_BITS_SHIFT) & MISC_CONFIG_BITS_MASK; + *flag_bits = (frame >> LOCAL_FLAG_BITS_SHIFT) & LOCAL_FLAG_BITS_MASK; + *link_widths = (frame >> LINK_WIDTH_SHIFT) & LINK_WIDTH_MASK; +} + +static int write_vc_local_link_width(struct hfi1_devdata *dd, + u8 misc_bits, + u8 flag_bits, + u16 link_widths) +{ + u32 frame; + + frame = (u32)misc_bits << MISC_CONFIG_BITS_SHIFT + | (u32)flag_bits << LOCAL_FLAG_BITS_SHIFT + | (u32)link_widths << LINK_WIDTH_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_LINK_WIDTH, GENERAL_CONFIG, + frame); +} + +static int write_local_device_id(struct hfi1_devdata *dd, u16 device_id, + u8 device_rev) +{ + u32 frame; + + frame = ((u32)device_id << LOCAL_DEVICE_ID_SHIFT) + | ((u32)device_rev << LOCAL_DEVICE_REV_SHIFT); + return load_8051_config(dd, LOCAL_DEVICE_ID, GENERAL_CONFIG, frame); +} + +static void read_remote_device_id(struct hfi1_devdata *dd, u16 *device_id, + u8 *device_rev) +{ + u32 frame; + + read_8051_config(dd, REMOTE_DEVICE_ID, GENERAL_CONFIG, &frame); + *device_id = (frame >> REMOTE_DEVICE_ID_SHIFT) & REMOTE_DEVICE_ID_MASK; + *device_rev = (frame >> REMOTE_DEVICE_REV_SHIFT) + & REMOTE_DEVICE_REV_MASK; +} + +void read_misc_status(struct hfi1_devdata *dd, u8 *ver_a, u8 *ver_b) +{ + u32 frame; + + read_8051_config(dd, MISC_STATUS, GENERAL_CONFIG, &frame); + *ver_a = (frame >> STS_FM_VERSION_A_SHIFT) & STS_FM_VERSION_A_MASK; + *ver_b = (frame >> STS_FM_VERSION_B_SHIFT) & STS_FM_VERSION_B_MASK; +} + +static void read_vc_remote_phy(struct hfi1_devdata *dd, u8 *power_management, + u8 *continuous) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_PHY, GENERAL_CONFIG, &frame); + *power_management = (frame >> POWER_MANAGEMENT_SHIFT) + & POWER_MANAGEMENT_MASK; + *continuous = (frame >> CONTINIOUS_REMOTE_UPDATE_SUPPORT_SHIFT) + & CONTINIOUS_REMOTE_UPDATE_SUPPORT_MASK; +} + +static void read_vc_remote_fabric(struct hfi1_devdata *dd, u8 *vau, u8 *z, + u8 *vcu, u16 *vl15buf, u8 *crc_sizes) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_FABRIC, GENERAL_CONFIG, &frame); + *vau = (frame >> VAU_SHIFT) & VAU_MASK; + *z = (frame >> Z_SHIFT) & Z_MASK; + *vcu = (frame >> VCU_SHIFT) & VCU_MASK; + *vl15buf = (frame >> VL15BUF_SHIFT) & VL15BUF_MASK; + *crc_sizes = (frame >> CRC_SIZES_SHIFT) & CRC_SIZES_MASK; +} + +static void read_vc_remote_link_width(struct hfi1_devdata *dd, + u8 *remote_tx_rate, + u16 *link_widths) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_LINK_WIDTH, GENERAL_CONFIG, + &frame); + *remote_tx_rate = (frame >> REMOTE_TX_RATE_SHIFT) + & REMOTE_TX_RATE_MASK; + *link_widths = (frame >> LINK_WIDTH_SHIFT) & LINK_WIDTH_MASK; +} + +static void read_local_lni(struct hfi1_devdata *dd, u8 *enable_lane_rx) +{ + u32 frame; + + read_8051_config(dd, LOCAL_LNI_INFO, GENERAL_CONFIG, &frame); + *enable_lane_rx = (frame >> ENABLE_LANE_RX_SHIFT) & ENABLE_LANE_RX_MASK; +} + +static void read_mgmt_allowed(struct hfi1_devdata *dd, u8 *mgmt_allowed) +{ + u32 frame; + + read_8051_config(dd, REMOTE_LNI_INFO, GENERAL_CONFIG, &frame); + *mgmt_allowed = (frame >> MGMT_ALLOWED_SHIFT) & MGMT_ALLOWED_MASK; +} + +static void read_last_local_state(struct hfi1_devdata *dd, u32 *lls) +{ + read_8051_config(dd, LAST_LOCAL_STATE_COMPLETE, GENERAL_CONFIG, lls); +} + +static void read_last_remote_state(struct hfi1_devdata *dd, u32 *lrs) +{ + read_8051_config(dd, LAST_REMOTE_STATE_COMPLETE, GENERAL_CONFIG, lrs); +} + +void hfi1_read_link_quality(struct hfi1_devdata *dd, u8 *link_quality) +{ + u32 frame; + int ret; + + *link_quality = 0; + if (dd->pport->host_link_state & HLS_UP) { + ret = read_8051_config(dd, LINK_QUALITY_INFO, GENERAL_CONFIG, + &frame); + if (ret == 0) + *link_quality = (frame >> LINK_QUALITY_SHIFT) + & LINK_QUALITY_MASK; + } +} + +static void read_planned_down_reason_code(struct hfi1_devdata *dd, u8 *pdrrc) +{ + u32 frame; + + read_8051_config(dd, LINK_QUALITY_INFO, GENERAL_CONFIG, &frame); + *pdrrc = (frame >> DOWN_REMOTE_REASON_SHIFT) & DOWN_REMOTE_REASON_MASK; +} + +static int read_tx_settings(struct hfi1_devdata *dd, + u8 *enable_lane_tx, + u8 *tx_polarity_inversion, + u8 *rx_polarity_inversion, + u8 *max_rate) +{ + u32 frame; + int ret; + + ret = read_8051_config(dd, TX_SETTINGS, GENERAL_CONFIG, &frame); + *enable_lane_tx = (frame >> ENABLE_LANE_TX_SHIFT) + & ENABLE_LANE_TX_MASK; + *tx_polarity_inversion = (frame >> TX_POLARITY_INVERSION_SHIFT) + & TX_POLARITY_INVERSION_MASK; + *rx_polarity_inversion = (frame >> RX_POLARITY_INVERSION_SHIFT) + & RX_POLARITY_INVERSION_MASK; + *max_rate = (frame >> MAX_RATE_SHIFT) & MAX_RATE_MASK; + return ret; +} + +static int write_tx_settings(struct hfi1_devdata *dd, + u8 enable_lane_tx, + u8 tx_polarity_inversion, + u8 rx_polarity_inversion, + u8 max_rate) +{ + u32 frame; + + /* no need to mask, all variable sizes match field widths */ + frame = enable_lane_tx << ENABLE_LANE_TX_SHIFT + | tx_polarity_inversion << TX_POLARITY_INVERSION_SHIFT + | rx_polarity_inversion << RX_POLARITY_INVERSION_SHIFT + | max_rate << MAX_RATE_SHIFT; + return load_8051_config(dd, TX_SETTINGS, GENERAL_CONFIG, frame); +} + +static void check_fabric_firmware_versions(struct hfi1_devdata *dd) +{ + u32 frame, version, prod_id; + int ret, lane; + + /* 4 lanes */ + for (lane = 0; lane < 4; lane++) { + ret = read_8051_config(dd, SPICO_FW_VERSION, lane, &frame); + if (ret) { + dd_dev_err( + dd, + "Unable to read lane %d firmware details\n", + lane); + continue; + } + version = (frame >> SPICO_ROM_VERSION_SHIFT) + & SPICO_ROM_VERSION_MASK; + prod_id = (frame >> SPICO_ROM_PROD_ID_SHIFT) + & SPICO_ROM_PROD_ID_MASK; + dd_dev_info(dd, + "Lane %d firmware: version 0x%04x, prod_id 0x%04x\n", + lane, version, prod_id); + } +} + +/* + * Read an idle LCB message. + * + * Returns 0 on success, -EINVAL on error + */ +static int read_idle_message(struct hfi1_devdata *dd, u64 type, u64 *data_out) +{ + int ret; + + ret = do_8051_command(dd, HCMD_READ_LCB_IDLE_MSG, + type, data_out); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "read idle message: type %d, err %d\n", + (u32)type, ret); + return -EINVAL; + } + dd_dev_info(dd, "%s: read idle message 0x%llx\n", __func__, *data_out); + /* return only the payload as we already know the type */ + *data_out >>= IDLE_PAYLOAD_SHIFT; + return 0; +} + +/* + * Read an idle SMA message. To be done in response to a notification from + * the 8051. + * + * Returns 0 on success, -EINVAL on error + */ +static int read_idle_sma(struct hfi1_devdata *dd, u64 *data) +{ + return read_idle_message(dd, + (u64)IDLE_SMA << IDLE_MSG_TYPE_SHIFT, data); +} + +/* + * Send an idle LCB message. + * + * Returns 0 on success, -EINVAL on error + */ +static int send_idle_message(struct hfi1_devdata *dd, u64 data) +{ + int ret; + + dd_dev_info(dd, "%s: sending idle message 0x%llx\n", __func__, data); + ret = do_8051_command(dd, HCMD_SEND_LCB_IDLE_MSG, data, NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "send idle message: data 0x%llx, err %d\n", + data, ret); + return -EINVAL; + } + return 0; +} + +/* + * Send an idle SMA message. + * + * Returns 0 on success, -EINVAL on error + */ +int send_idle_sma(struct hfi1_devdata *dd, u64 message) +{ + u64 data; + + data = ((message & IDLE_PAYLOAD_MASK) << IDLE_PAYLOAD_SHIFT) + | ((u64)IDLE_SMA << IDLE_MSG_TYPE_SHIFT); + return send_idle_message(dd, data); +} + +/* + * Initialize the LCB then do a quick link up. This may or may not be + * in loopback. + * + * return 0 on success, -errno on error + */ +static int do_quick_linkup(struct hfi1_devdata *dd) +{ + u64 reg; + unsigned long timeout; + int ret; + + lcb_shutdown(dd, 0); + + if (loopback) { + /* LCB_CFG_LOOPBACK.VAL = 2 */ + /* LCB_CFG_LANE_WIDTH.VAL = 0 */ + write_csr(dd, DC_LCB_CFG_LOOPBACK, + IB_PACKET_TYPE << DC_LCB_CFG_LOOPBACK_VAL_SHIFT); + write_csr(dd, DC_LCB_CFG_LANE_WIDTH, 0); + } + + /* start the LCBs */ + /* LCB_CFG_TX_FIFOS_RESET.VAL = 0 */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0); + + /* simulator only loopback steps */ + if (loopback && dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + /* LCB_CFG_RUN.EN = 1 */ + write_csr(dd, DC_LCB_CFG_RUN, + 1ull << DC_LCB_CFG_RUN_EN_SHIFT); + + /* watch LCB_STS_LINK_TRANSFER_ACTIVE */ + timeout = jiffies + msecs_to_jiffies(10); + while (1) { + reg = read_csr(dd, + DC_LCB_STS_LINK_TRANSFER_ACTIVE); + if (reg) + break; + if (time_after(jiffies, timeout)) { + dd_dev_err(dd, + "timeout waiting for LINK_TRANSFER_ACTIVE\n"); + return -ETIMEDOUT; + } + udelay(2); + } + + write_csr(dd, DC_LCB_CFG_ALLOW_LINK_UP, + 1ull << DC_LCB_CFG_ALLOW_LINK_UP_VAL_SHIFT); + } + + if (!loopback) { + /* + * When doing quick linkup and not in loopback, both + * sides must be done with LCB set-up before either + * starts the quick linkup. Put a delay here so that + * both sides can be started and have a chance to be + * done with LCB set up before resuming. + */ + dd_dev_err(dd, + "Pausing for peer to be finished with LCB set up\n"); + msleep(5000); + dd_dev_err(dd, + "Continuing with quick linkup\n"); + } + + write_csr(dd, DC_LCB_ERR_EN, 0); /* mask LCB errors */ + set_8051_lcb_access(dd); + + /* + * State "quick" LinkUp request sets the physical link state to + * LinkUp without a verify capability sequence. + * This state is in simulator v37 and later. + */ + ret = set_physical_link_state(dd, PLS_QUICK_LINKUP); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, + "%s: set physical link state to quick LinkUp failed with return %d\n", + __func__, ret); + + set_host_lcb_access(dd); + write_csr(dd, DC_LCB_ERR_EN, ~0ull); /* watch LCB errors */ + + if (ret >= 0) + ret = -EINVAL; + return ret; + } + + return 0; /* success */ +} + +/* + * Set the SerDes to internal loopback mode. + * Returns 0 on success, -errno on error. + */ +static int set_serdes_loopback_mode(struct hfi1_devdata *dd) +{ + int ret; + + ret = set_physical_link_state(dd, PLS_INTERNAL_SERDES_LOOPBACK); + if (ret == HCMD_SUCCESS) + return 0; + dd_dev_err(dd, + "Set physical link state to SerDes Loopback failed with return %d\n", + ret); + if (ret >= 0) + ret = -EINVAL; + return ret; +} + +/* + * Do all special steps to set up loopback. + */ +static int init_loopback(struct hfi1_devdata *dd) +{ + dd_dev_info(dd, "Entering loopback mode\n"); + + /* all loopbacks should disable self GUID check */ + write_csr(dd, DC_DC8051_CFG_MODE, + (read_csr(dd, DC_DC8051_CFG_MODE) | DISABLE_SELF_GUID_CHECK)); + + /* + * The simulator has only one loopback option - LCB. Switch + * to that option, which includes quick link up. + * + * Accept all valid loopback values. + */ + if ((dd->icode == ICODE_FUNCTIONAL_SIMULATOR) + && (loopback == LOOPBACK_SERDES + || loopback == LOOPBACK_LCB + || loopback == LOOPBACK_CABLE)) { + loopback = LOOPBACK_LCB; + quick_linkup = 1; + return 0; + } + + /* handle serdes loopback */ + if (loopback == LOOPBACK_SERDES) { + /* internal serdes loopack needs quick linkup on RTL */ + if (dd->icode == ICODE_RTL_SILICON) + quick_linkup = 1; + return set_serdes_loopback_mode(dd); + } + + /* LCB loopback - handled at poll time */ + if (loopback == LOOPBACK_LCB) { + quick_linkup = 1; /* LCB is always quick linkup */ + + /* not supported in emulation due to emulation RTL changes */ + if (dd->icode == ICODE_FPGA_EMULATION) { + dd_dev_err(dd, + "LCB loopback not supported in emulation\n"); + return -EINVAL; + } + return 0; + } + + /* external cable loopback requires no extra steps */ + if (loopback == LOOPBACK_CABLE) + return 0; + + dd_dev_err(dd, "Invalid loopback mode %d\n", loopback); + return -EINVAL; +} + +/* + * Translate from the OPA_LINK_WIDTH handed to us by the FM to bits + * used in the Verify Capability link width attribute. + */ +static u16 opa_to_vc_link_widths(u16 opa_widths) +{ + int i; + u16 result = 0; + + static const struct link_bits { + u16 from; + u16 to; + } opa_link_xlate[] = { + { OPA_LINK_WIDTH_1X, 1 << (1-1) }, + { OPA_LINK_WIDTH_2X, 1 << (2-1) }, + { OPA_LINK_WIDTH_3X, 1 << (3-1) }, + { OPA_LINK_WIDTH_4X, 1 << (4-1) }, + }; + + for (i = 0; i < ARRAY_SIZE(opa_link_xlate); i++) { + if (opa_widths & opa_link_xlate[i].from) + result |= opa_link_xlate[i].to; + } + return result; +} + +/* + * Set link attributes before moving to polling. + */ +static int set_local_link_attributes(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u8 enable_lane_tx; + u8 tx_polarity_inversion; + u8 rx_polarity_inversion; + int ret; + + /* reset our fabric serdes to clear any lingering problems */ + fabric_serdes_reset(dd); + + /* set the local tx rate - need to read-modify-write */ + ret = read_tx_settings(dd, &enable_lane_tx, &tx_polarity_inversion, + &rx_polarity_inversion, &ppd->local_tx_rate); + if (ret) + goto set_local_link_attributes_fail; + + if (dd->dc8051_ver < dc8051_ver(0, 20)) { + /* set the tx rate to the fastest enabled */ + if (ppd->link_speed_enabled & OPA_LINK_SPEED_25G) + ppd->local_tx_rate = 1; + else + ppd->local_tx_rate = 0; + } else { + /* set the tx rate to all enabled */ + ppd->local_tx_rate = 0; + if (ppd->link_speed_enabled & OPA_LINK_SPEED_25G) + ppd->local_tx_rate |= 2; + if (ppd->link_speed_enabled & OPA_LINK_SPEED_12_5G) + ppd->local_tx_rate |= 1; + } + ret = write_tx_settings(dd, enable_lane_tx, tx_polarity_inversion, + rx_polarity_inversion, ppd->local_tx_rate); + if (ret != HCMD_SUCCESS) + goto set_local_link_attributes_fail; + + /* + * DC supports continuous updates. + */ + ret = write_vc_local_phy(dd, 0 /* no power management */, + 1 /* continuous updates */); + if (ret != HCMD_SUCCESS) + goto set_local_link_attributes_fail; + + /* z=1 in the next call: AU of 0 is not supported by the hardware */ + ret = write_vc_local_fabric(dd, dd->vau, 1, dd->vcu, dd->vl15_init, + ppd->port_crc_mode_enabled); + if (ret != HCMD_SUCCESS) + goto set_local_link_attributes_fail; + + ret = write_vc_local_link_width(dd, 0, 0, + opa_to_vc_link_widths(ppd->link_width_enabled)); + if (ret != HCMD_SUCCESS) + goto set_local_link_attributes_fail; + + /* let peer know who we are */ + ret = write_local_device_id(dd, dd->pcidev->device, dd->minrev); + if (ret == HCMD_SUCCESS) + return 0; + +set_local_link_attributes_fail: + dd_dev_err(dd, + "Failed to set local link attributes, return 0x%x\n", + ret); + return ret; +} + +/* + * Call this to start the link. Schedule a retry if the cable is not + * present or if unable to start polling. Do not do anything if the + * link is disabled. Returns 0 if link is disabled or moved to polling + */ +int start_link(struct hfi1_pportdata *ppd) +{ + if (!ppd->link_enabled) { + dd_dev_info(ppd->dd, + "%s: stopping link start because link is disabled\n", + __func__); + return 0; + } + if (!ppd->driver_link_ready) { + dd_dev_info(ppd->dd, + "%s: stopping link start because driver is not ready\n", + __func__); + return 0; + } + + if (qsfp_mod_present(ppd) || loopback == LOOPBACK_SERDES || + loopback == LOOPBACK_LCB || + ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) + return set_link_state(ppd, HLS_DN_POLL); + + dd_dev_info(ppd->dd, + "%s: stopping link start because no cable is present\n", + __func__); + return -EAGAIN; +} + +static void reset_qsfp(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 mask, qsfp_mask; + + mask = (u64)QSFP_HFI0_RESET_N; + qsfp_mask = read_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE); + qsfp_mask |= mask; + write_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE, + qsfp_mask); + + qsfp_mask = read_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT); + qsfp_mask &= ~mask; + write_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT, + qsfp_mask); + + udelay(10); + + qsfp_mask |= mask; + write_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT, + qsfp_mask); +} + +static int handle_qsfp_error_conditions(struct hfi1_pportdata *ppd, + u8 *qsfp_interrupt_status) +{ + struct hfi1_devdata *dd = ppd->dd; + + if ((qsfp_interrupt_status[0] & QSFP_HIGH_TEMP_ALARM) || + (qsfp_interrupt_status[0] & QSFP_HIGH_TEMP_WARNING)) + dd_dev_info(dd, + "%s: QSFP cable on fire\n", + __func__); + + if ((qsfp_interrupt_status[0] & QSFP_LOW_TEMP_ALARM) || + (qsfp_interrupt_status[0] & QSFP_LOW_TEMP_WARNING)) + dd_dev_info(dd, + "%s: QSFP cable temperature too low\n", + __func__); + + if ((qsfp_interrupt_status[1] & QSFP_HIGH_VCC_ALARM) || + (qsfp_interrupt_status[1] & QSFP_HIGH_VCC_WARNING)) + dd_dev_info(dd, + "%s: QSFP supply voltage too high\n", + __func__); + + if ((qsfp_interrupt_status[1] & QSFP_LOW_VCC_ALARM) || + (qsfp_interrupt_status[1] & QSFP_LOW_VCC_WARNING)) + dd_dev_info(dd, + "%s: QSFP supply voltage too low\n", + __func__); + + /* Byte 2 is vendor specific */ + + if ((qsfp_interrupt_status[3] & QSFP_HIGH_POWER_ALARM) || + (qsfp_interrupt_status[3] & QSFP_HIGH_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable RX channel 1/2 power too high\n", + __func__); + + if ((qsfp_interrupt_status[3] & QSFP_LOW_POWER_ALARM) || + (qsfp_interrupt_status[3] & QSFP_LOW_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable RX channel 1/2 power too low\n", + __func__); + + if ((qsfp_interrupt_status[4] & QSFP_HIGH_POWER_ALARM) || + (qsfp_interrupt_status[4] & QSFP_HIGH_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable RX channel 3/4 power too high\n", + __func__); + + if ((qsfp_interrupt_status[4] & QSFP_LOW_POWER_ALARM) || + (qsfp_interrupt_status[4] & QSFP_LOW_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable RX channel 3/4 power too low\n", + __func__); + + if ((qsfp_interrupt_status[5] & QSFP_HIGH_BIAS_ALARM) || + (qsfp_interrupt_status[5] & QSFP_HIGH_BIAS_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 1/2 bias too high\n", + __func__); + + if ((qsfp_interrupt_status[5] & QSFP_LOW_BIAS_ALARM) || + (qsfp_interrupt_status[5] & QSFP_LOW_BIAS_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 1/2 bias too low\n", + __func__); + + if ((qsfp_interrupt_status[6] & QSFP_HIGH_BIAS_ALARM) || + (qsfp_interrupt_status[6] & QSFP_HIGH_BIAS_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 3/4 bias too high\n", + __func__); + + if ((qsfp_interrupt_status[6] & QSFP_LOW_BIAS_ALARM) || + (qsfp_interrupt_status[6] & QSFP_LOW_BIAS_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 3/4 bias too low\n", + __func__); + + if ((qsfp_interrupt_status[7] & QSFP_HIGH_POWER_ALARM) || + (qsfp_interrupt_status[7] & QSFP_HIGH_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 1/2 power too high\n", + __func__); + + if ((qsfp_interrupt_status[7] & QSFP_LOW_POWER_ALARM) || + (qsfp_interrupt_status[7] & QSFP_LOW_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 1/2 power too low\n", + __func__); + + if ((qsfp_interrupt_status[8] & QSFP_HIGH_POWER_ALARM) || + (qsfp_interrupt_status[8] & QSFP_HIGH_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 3/4 power too high\n", + __func__); + + if ((qsfp_interrupt_status[8] & QSFP_LOW_POWER_ALARM) || + (qsfp_interrupt_status[8] & QSFP_LOW_POWER_WARNING)) + dd_dev_info(dd, + "%s: Cable TX channel 3/4 power too low\n", + __func__); + + /* Bytes 9-10 and 11-12 are reserved */ + /* Bytes 13-15 are vendor specific */ + + return 0; +} + +static int do_pre_lni_host_behaviors(struct hfi1_pportdata *ppd) +{ + refresh_qsfp_cache(ppd, &ppd->qsfp_info); + + return 0; +} + +static int do_qsfp_intr_fallback(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u8 qsfp_interrupt_status = 0; + + if (qsfp_read(ppd, dd->hfi1_id, 2, &qsfp_interrupt_status, 1) + != 1) { + dd_dev_info(dd, + "%s: Failed to read status of QSFP module\n", + __func__); + return -EIO; + } + + /* We don't care about alarms & warnings with a non-functional INT_N */ + if (!(qsfp_interrupt_status & QSFP_DATA_NOT_READY)) + do_pre_lni_host_behaviors(ppd); + + return 0; +} + +/* This routine will only be scheduled if the QSFP module is present */ +static void qsfp_event(struct work_struct *work) +{ + struct qsfp_data *qd; + struct hfi1_pportdata *ppd; + struct hfi1_devdata *dd; + + qd = container_of(work, struct qsfp_data, qsfp_work); + ppd = qd->ppd; + dd = ppd->dd; + + /* Sanity check */ + if (!qsfp_mod_present(ppd)) + return; + + /* + * Turn DC back on after cables has been + * re-inserted. Up until now, the DC has been in + * reset to save power. + */ + dc_start(dd); + + if (qd->cache_refresh_required) { + msleep(3000); + reset_qsfp(ppd); + + /* Check for QSFP interrupt after t_init (SFF 8679) + * + extra + */ + msleep(3000); + if (!qd->qsfp_interrupt_functional) { + if (do_qsfp_intr_fallback(ppd) < 0) + dd_dev_info(dd, "%s: QSFP fallback failed\n", + __func__); + ppd->driver_link_ready = 1; + start_link(ppd); + } + } + + if (qd->check_interrupt_flags) { + u8 qsfp_interrupt_status[16] = {0,}; + + if (qsfp_read(ppd, dd->hfi1_id, 6, + &qsfp_interrupt_status[0], 16) != 16) { + dd_dev_info(dd, + "%s: Failed to read status of QSFP module\n", + __func__); + } else { + unsigned long flags; + u8 data_status; + + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.check_interrupt_flags = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, + flags); + + if (qsfp_read(ppd, dd->hfi1_id, 2, &data_status, 1) + != 1) { + dd_dev_info(dd, + "%s: Failed to read status of QSFP module\n", + __func__); + } + if (!(data_status & QSFP_DATA_NOT_READY)) { + do_pre_lni_host_behaviors(ppd); + start_link(ppd); + } else + handle_qsfp_error_conditions(ppd, + qsfp_interrupt_status); + } + } +} + +void init_qsfp(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 qsfp_mask; + + if (loopback == LOOPBACK_SERDES || loopback == LOOPBACK_LCB || + ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR || + !HFI1_CAP_IS_KSET(QSFP_ENABLED)) { + ppd->driver_link_ready = 1; + return; + } + + ppd->qsfp_info.ppd = ppd; + INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event); + + qsfp_mask = (u64)(QSFP_HFI0_INT_N | QSFP_HFI0_MODPRST_N); + /* Clear current status to avoid spurious interrupts */ + write_csr(dd, + dd->hfi1_id ? + ASIC_QSFP2_CLEAR : + ASIC_QSFP1_CLEAR, + qsfp_mask); + + /* Handle active low nature of INT_N and MODPRST_N pins */ + if (qsfp_mod_present(ppd)) + qsfp_mask &= ~(u64)QSFP_HFI0_MODPRST_N; + write_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_INVERT : ASIC_QSFP1_INVERT, + qsfp_mask); + + /* Allow only INT_N and MODPRST_N to trigger QSFP interrupts */ + qsfp_mask |= (u64)QSFP_HFI0_MODPRST_N; + write_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_MASK : ASIC_QSFP1_MASK, + qsfp_mask); + + if (qsfp_mod_present(ppd)) { + msleep(3000); + reset_qsfp(ppd); + + /* Check for QSFP interrupt after t_init (SFF 8679) + * + extra + */ + msleep(3000); + if (!ppd->qsfp_info.qsfp_interrupt_functional) { + if (do_qsfp_intr_fallback(ppd) < 0) + dd_dev_info(dd, + "%s: QSFP fallback failed\n", + __func__); + ppd->driver_link_ready = 1; + } + } +} + +int bringup_serdes(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 guid; + int ret; + + if (HFI1_CAP_IS_KSET(EXTENDED_PSN)) + add_rcvctrl(dd, RCV_CTRL_RCV_EXTENDED_PSN_ENABLE_SMASK); + + guid = ppd->guid; + if (!guid) { + if (dd->base_guid) + guid = dd->base_guid + ppd->port - 1; + ppd->guid = guid; + } + + /* the link defaults to enabled */ + ppd->link_enabled = 1; + /* Set linkinit_reason on power up per OPA spec */ + ppd->linkinit_reason = OPA_LINKINIT_REASON_LINKUP; + + if (loopback) { + ret = init_loopback(dd); + if (ret < 0) + return ret; + } + + return start_link(ppd); +} + +void hfi1_quiet_serdes(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + + /* + * Shut down the link and keep it down. First turn off that the + * driver wants to allow the link to be up (driver_link_ready). + * Then make sure the link is not automatically restarted + * (link_enabled). Cancel any pending restart. And finally + * go offline. + */ + ppd->driver_link_ready = 0; + ppd->link_enabled = 0; + + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SMA_DISABLED, 0, + OPA_LINKDOWN_REASON_SMA_DISABLED); + set_link_state(ppd, HLS_DN_OFFLINE); + + /* disable the port */ + clear_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); +} + +static inline int init_cpu_counters(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int i; + + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + ppd->ibport_data.rc_acks = NULL; + ppd->ibport_data.rc_qacks = NULL; + ppd->ibport_data.rc_acks = alloc_percpu(u64); + ppd->ibport_data.rc_qacks = alloc_percpu(u64); + ppd->ibport_data.rc_delayed_comp = alloc_percpu(u64); + if ((ppd->ibport_data.rc_acks == NULL) || + (ppd->ibport_data.rc_delayed_comp == NULL) || + (ppd->ibport_data.rc_qacks == NULL)) + return -ENOMEM; + } + + return 0; +} + +static const char * const pt_names[] = { + "expected", + "eager", + "invalid" +}; + +static const char *pt_name(u32 type) +{ + return type >= ARRAY_SIZE(pt_names) ? "unknown" : pt_names[type]; +} + +/* + * index is the index into the receive array + */ +void hfi1_put_tid(struct hfi1_devdata *dd, u32 index, + u32 type, unsigned long pa, u16 order) +{ + u64 reg; + void __iomem *base = (dd->rcvarray_wc ? dd->rcvarray_wc : + (dd->kregbase + RCV_ARRAY)); + + if (!(dd->flags & HFI1_PRESENT)) + goto done; + + if (type == PT_INVALID) { + pa = 0; + } else if (type > PT_INVALID) { + dd_dev_err(dd, + "unexpected receive array type %u for index %u, not handled\n", + type, index); + goto done; + } + + hfi1_cdbg(TID, "type %s, index 0x%x, pa 0x%lx, bsize 0x%lx", + pt_name(type), index, pa, (unsigned long)order); + +#define RT_ADDR_SHIFT 12 /* 4KB kernel address boundary */ + reg = RCV_ARRAY_RT_WRITE_ENABLE_SMASK + | (u64)order << RCV_ARRAY_RT_BUF_SIZE_SHIFT + | ((pa >> RT_ADDR_SHIFT) & RCV_ARRAY_RT_ADDR_MASK) + << RCV_ARRAY_RT_ADDR_SHIFT; + writeq(reg, base + (index * 8)); + + if (type == PT_EAGER) + /* + * Eager entries are written one-by-one so we have to push them + * after we write the entry. + */ + flush_wc(); +done: + return; +} + +void hfi1_clear_tids(struct hfi1_ctxtdata *rcd) +{ + struct hfi1_devdata *dd = rcd->dd; + u32 i; + + /* this could be optimized */ + for (i = rcd->eager_base; i < rcd->eager_base + + rcd->egrbufs.alloced; i++) + hfi1_put_tid(dd, i, PT_INVALID, 0, 0); + + for (i = rcd->expected_base; + i < rcd->expected_base + rcd->expected_count; i++) + hfi1_put_tid(dd, i, PT_INVALID, 0, 0); +} + +int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd, + struct hfi1_ctxt_info *kinfo) +{ + kinfo->runtime_flags = (HFI1_MISC_GET() << HFI1_CAP_USER_SHIFT) | + HFI1_CAP_UGET(MASK) | HFI1_CAP_KGET(K2U); + return 0; +} + +struct hfi1_message_header *hfi1_get_msgheader( + struct hfi1_devdata *dd, __le32 *rhf_addr) +{ + u32 offset = rhf_hdrq_offset(rhf_to_cpu(rhf_addr)); + + return (struct hfi1_message_header *) + (rhf_addr - dd->rhf_offset + offset); +} + +static const char * const ib_cfg_name_strings[] = { + "HFI1_IB_CFG_LIDLMC", + "HFI1_IB_CFG_LWID_DG_ENB", + "HFI1_IB_CFG_LWID_ENB", + "HFI1_IB_CFG_LWID", + "HFI1_IB_CFG_SPD_ENB", + "HFI1_IB_CFG_SPD", + "HFI1_IB_CFG_RXPOL_ENB", + "HFI1_IB_CFG_LREV_ENB", + "HFI1_IB_CFG_LINKLATENCY", + "HFI1_IB_CFG_HRTBT", + "HFI1_IB_CFG_OP_VLS", + "HFI1_IB_CFG_VL_HIGH_CAP", + "HFI1_IB_CFG_VL_LOW_CAP", + "HFI1_IB_CFG_OVERRUN_THRESH", + "HFI1_IB_CFG_PHYERR_THRESH", + "HFI1_IB_CFG_LINKDEFAULT", + "HFI1_IB_CFG_PKEYS", + "HFI1_IB_CFG_MTU", + "HFI1_IB_CFG_LSTATE", + "HFI1_IB_CFG_VL_HIGH_LIMIT", + "HFI1_IB_CFG_PMA_TICKS", + "HFI1_IB_CFG_PORT" +}; + +static const char *ib_cfg_name(int which) +{ + if (which < 0 || which >= ARRAY_SIZE(ib_cfg_name_strings)) + return "invalid"; + return ib_cfg_name_strings[which]; +} + +int hfi1_get_ib_cfg(struct hfi1_pportdata *ppd, int which) +{ + struct hfi1_devdata *dd = ppd->dd; + int val = 0; + + switch (which) { + case HFI1_IB_CFG_LWID_ENB: /* allowed Link-width */ + val = ppd->link_width_enabled; + break; + case HFI1_IB_CFG_LWID: /* currently active Link-width */ + val = ppd->link_width_active; + break; + case HFI1_IB_CFG_SPD_ENB: /* allowed Link speeds */ + val = ppd->link_speed_enabled; + break; + case HFI1_IB_CFG_SPD: /* current Link speed */ + val = ppd->link_speed_active; + break; + + case HFI1_IB_CFG_RXPOL_ENB: /* Auto-RX-polarity enable */ + case HFI1_IB_CFG_LREV_ENB: /* Auto-Lane-reversal enable */ + case HFI1_IB_CFG_LINKLATENCY: + goto unimplemented; + + case HFI1_IB_CFG_OP_VLS: + val = ppd->vls_operational; + break; + case HFI1_IB_CFG_VL_HIGH_CAP: /* VL arb high priority table size */ + val = VL_ARB_HIGH_PRIO_TABLE_SIZE; + break; + case HFI1_IB_CFG_VL_LOW_CAP: /* VL arb low priority table size */ + val = VL_ARB_LOW_PRIO_TABLE_SIZE; + break; + case HFI1_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + val = ppd->overrun_threshold; + break; + case HFI1_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + val = ppd->phy_error_threshold; + break; + case HFI1_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + val = dd->link_default; + break; + + case HFI1_IB_CFG_HRTBT: /* Heartbeat off/enable/auto */ + case HFI1_IB_CFG_PMA_TICKS: + default: +unimplemented: + if (HFI1_CAP_IS_KSET(PRINT_UNIMPL)) + dd_dev_info( + dd, + "%s: which %s: not implemented\n", + __func__, + ib_cfg_name(which)); + break; + } + + return val; +} + +/* + * The largest MAD packet size. + */ +#define MAX_MAD_PACKET 2048 + +/* + * Return the maximum header bytes that can go on the _wire_ + * for this device. This count includes the ICRC which is + * not part of the packet held in memory but it is appended + * by the HW. + * This is dependent on the device's receive header entry size. + * HFI allows this to be set per-receive context, but the + * driver presently enforces a global value. + */ +u32 lrh_max_header_bytes(struct hfi1_devdata *dd) +{ + /* + * The maximum non-payload (MTU) bytes in LRH.PktLen are + * the Receive Header Entry Size minus the PBC (or RHF) size + * plus one DW for the ICRC appended by HW. + * + * dd->rcd[0].rcvhdrqentsize is in DW. + * We use rcd[0] as all context will have the same value. Also, + * the first kernel context would have been allocated by now so + * we are guaranteed a valid value. + */ + return (dd->rcd[0]->rcvhdrqentsize - 2/*PBC/RHF*/ + 1/*ICRC*/) << 2; +} + +/* + * Set Send Length + * @ppd - per port data + * + * Set the MTU by limiting how many DWs may be sent. The SendLenCheck* + * registers compare against LRH.PktLen, so use the max bytes included + * in the LRH. + * + * This routine changes all VL values except VL15, which it maintains at + * the same value. + */ +static void set_send_length(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u32 max_hb = lrh_max_header_bytes(dd), maxvlmtu = 0, dcmtu; + u64 len1 = 0, len2 = (((dd->vld[15].mtu + max_hb) >> 2) + & SEND_LEN_CHECK1_LEN_VL15_MASK) << + SEND_LEN_CHECK1_LEN_VL15_SHIFT; + int i; + + for (i = 0; i < ppd->vls_supported; i++) { + if (dd->vld[i].mtu > maxvlmtu) + maxvlmtu = dd->vld[i].mtu; + if (i <= 3) + len1 |= (((dd->vld[i].mtu + max_hb) >> 2) + & SEND_LEN_CHECK0_LEN_VL0_MASK) << + ((i % 4) * SEND_LEN_CHECK0_LEN_VL1_SHIFT); + else + len2 |= (((dd->vld[i].mtu + max_hb) >> 2) + & SEND_LEN_CHECK1_LEN_VL4_MASK) << + ((i % 4) * SEND_LEN_CHECK1_LEN_VL5_SHIFT); + } + write_csr(dd, SEND_LEN_CHECK0, len1); + write_csr(dd, SEND_LEN_CHECK1, len2); + /* adjust kernel credit return thresholds based on new MTUs */ + /* all kernel receive contexts have the same hdrqentsize */ + for (i = 0; i < ppd->vls_supported; i++) { + sc_set_cr_threshold(dd->vld[i].sc, + sc_mtu_to_threshold(dd->vld[i].sc, dd->vld[i].mtu, + dd->rcd[0]->rcvhdrqentsize)); + } + sc_set_cr_threshold(dd->vld[15].sc, + sc_mtu_to_threshold(dd->vld[15].sc, dd->vld[15].mtu, + dd->rcd[0]->rcvhdrqentsize)); + + /* Adjust maximum MTU for the port in DC */ + dcmtu = maxvlmtu == 10240 ? DCC_CFG_PORT_MTU_CAP_10240 : + (ilog2(maxvlmtu >> 8) + 1); + len1 = read_csr(ppd->dd, DCC_CFG_PORT_CONFIG); + len1 &= ~DCC_CFG_PORT_CONFIG_MTU_CAP_SMASK; + len1 |= ((u64)dcmtu & DCC_CFG_PORT_CONFIG_MTU_CAP_MASK) << + DCC_CFG_PORT_CONFIG_MTU_CAP_SHIFT; + write_csr(ppd->dd, DCC_CFG_PORT_CONFIG, len1); +} + +static void set_lidlmc(struct hfi1_pportdata *ppd) +{ + int i; + u64 sreg = 0; + struct hfi1_devdata *dd = ppd->dd; + u32 mask = ~((1U << ppd->lmc) - 1); + u64 c1 = read_csr(ppd->dd, DCC_CFG_PORT_CONFIG1); + + if (dd->hfi1_snoop.mode_flag) + dd_dev_info(dd, "Set lid/lmc while snooping"); + + c1 &= ~(DCC_CFG_PORT_CONFIG1_TARGET_DLID_SMASK + | DCC_CFG_PORT_CONFIG1_DLID_MASK_SMASK); + c1 |= ((ppd->lid & DCC_CFG_PORT_CONFIG1_TARGET_DLID_MASK) + << DCC_CFG_PORT_CONFIG1_TARGET_DLID_SHIFT)| + ((mask & DCC_CFG_PORT_CONFIG1_DLID_MASK_MASK) + << DCC_CFG_PORT_CONFIG1_DLID_MASK_SHIFT); + write_csr(ppd->dd, DCC_CFG_PORT_CONFIG1, c1); + + /* + * Iterate over all the send contexts and set their SLID check + */ + sreg = ((mask & SEND_CTXT_CHECK_SLID_MASK_MASK) << + SEND_CTXT_CHECK_SLID_MASK_SHIFT) | + (((ppd->lid & mask) & SEND_CTXT_CHECK_SLID_VALUE_MASK) << + SEND_CTXT_CHECK_SLID_VALUE_SHIFT); + + for (i = 0; i < dd->chip_send_contexts; i++) { + hfi1_cdbg(LINKVERB, "SendContext[%d].SLID_CHECK = 0x%x", + i, (u32)sreg); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_SLID, sreg); + } + + /* Now we have to do the same thing for the sdma engines */ + sdma_update_lmc(dd, mask, ppd->lid); +} + +static int wait_phy_linkstate(struct hfi1_devdata *dd, u32 state, u32 msecs) +{ + unsigned long timeout; + u32 curr_state; + + timeout = jiffies + msecs_to_jiffies(msecs); + while (1) { + curr_state = read_physical_state(dd); + if (curr_state == state) + break; + if (time_after(jiffies, timeout)) { + dd_dev_err(dd, + "timeout waiting for phy link state 0x%x, current state is 0x%x\n", + state, curr_state); + return -ETIMEDOUT; + } + usleep_range(1950, 2050); /* sleep 2ms-ish */ + } + + return 0; +} + +/* + * Helper for set_link_state(). Do not call except from that routine. + * Expects ppd->hls_mutex to be held. + * + * @rem_reason value to be sent to the neighbor + * + * LinkDownReasons only set if transition succeeds. + */ +static int goto_offline(struct hfi1_pportdata *ppd, u8 rem_reason) +{ + struct hfi1_devdata *dd = ppd->dd; + u32 pstate, previous_state; + u32 last_local_state; + u32 last_remote_state; + int ret; + int do_transition; + int do_wait; + + previous_state = ppd->host_link_state; + ppd->host_link_state = HLS_GOING_OFFLINE; + pstate = read_physical_state(dd); + if (pstate == PLS_OFFLINE) { + do_transition = 0; /* in right state */ + do_wait = 0; /* ...no need to wait */ + } else if ((pstate & 0xff) == PLS_OFFLINE) { + do_transition = 0; /* in an offline transient state */ + do_wait = 1; /* ...wait for it to settle */ + } else { + do_transition = 1; /* need to move to offline */ + do_wait = 1; /* ...will need to wait */ + } + + if (do_transition) { + ret = set_physical_link_state(dd, + PLS_OFFLINE | (rem_reason << 8)); + + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, + "Failed to transition to Offline link state, return %d\n", + ret); + return -EINVAL; + } + if (ppd->offline_disabled_reason == OPA_LINKDOWN_REASON_NONE) + ppd->offline_disabled_reason = + OPA_LINKDOWN_REASON_TRANSIENT; + } + + if (do_wait) { + /* it can take a while for the link to go down */ + ret = wait_phy_linkstate(dd, PLS_OFFLINE, 5000); + if (ret < 0) + return ret; + } + + /* make sure the logical state is also down */ + wait_logical_linkstate(ppd, IB_PORT_DOWN, 1000); + + /* + * Now in charge of LCB - must be after the physical state is + * offline.quiet and before host_link_state is changed. + */ + set_host_lcb_access(dd); + write_csr(dd, DC_LCB_ERR_EN, ~0ull); /* watch LCB errors */ + ppd->host_link_state = HLS_LINK_COOLDOWN; /* LCB access allowed */ + + /* + * The LNI has a mandatory wait time after the physical state + * moves to Offline.Quiet. The wait time may be different + * depending on how the link went down. The 8051 firmware + * will observe the needed wait time and only move to ready + * when that is completed. The largest of the quiet timeouts + * is 2.5s, so wait that long and then a bit more. + */ + ret = wait_fm_ready(dd, 3000); + if (ret) { + dd_dev_err(dd, + "After going offline, timed out waiting for the 8051 to become ready to accept host requests\n"); + /* state is really offline, so make it so */ + ppd->host_link_state = HLS_DN_OFFLINE; + return ret; + } + + /* + * The state is now offline and the 8051 is ready to accept host + * requests. + * - change our state + * - notify others if we were previously in a linkup state + */ + ppd->host_link_state = HLS_DN_OFFLINE; + if (previous_state & HLS_UP) { + /* went down while link was up */ + handle_linkup_change(dd, 0); + } else if (previous_state + & (HLS_DN_POLL | HLS_VERIFY_CAP | HLS_GOING_UP)) { + /* went down while attempting link up */ + /* byte 1 of last_*_state is the failure reason */ + read_last_local_state(dd, &last_local_state); + read_last_remote_state(dd, &last_remote_state); + dd_dev_err(dd, + "LNI failure last states: local 0x%08x, remote 0x%08x\n", + last_local_state, last_remote_state); + } + + /* the active link width (downgrade) is 0 on link down */ + ppd->link_width_active = 0; + ppd->link_width_downgrade_tx_active = 0; + ppd->link_width_downgrade_rx_active = 0; + ppd->current_egress_rate = 0; + return 0; +} + +/* return the link state name */ +static const char *link_state_name(u32 state) +{ + const char *name; + int n = ilog2(state); + static const char * const names[] = { + [__HLS_UP_INIT_BP] = "INIT", + [__HLS_UP_ARMED_BP] = "ARMED", + [__HLS_UP_ACTIVE_BP] = "ACTIVE", + [__HLS_DN_DOWNDEF_BP] = "DOWNDEF", + [__HLS_DN_POLL_BP] = "POLL", + [__HLS_DN_DISABLE_BP] = "DISABLE", + [__HLS_DN_OFFLINE_BP] = "OFFLINE", + [__HLS_VERIFY_CAP_BP] = "VERIFY_CAP", + [__HLS_GOING_UP_BP] = "GOING_UP", + [__HLS_GOING_OFFLINE_BP] = "GOING_OFFLINE", + [__HLS_LINK_COOLDOWN_BP] = "LINK_COOLDOWN" + }; + + name = n < ARRAY_SIZE(names) ? names[n] : NULL; + return name ? name : "unknown"; +} + +/* return the link state reason name */ +static const char *link_state_reason_name(struct hfi1_pportdata *ppd, u32 state) +{ + if (state == HLS_UP_INIT) { + switch (ppd->linkinit_reason) { + case OPA_LINKINIT_REASON_LINKUP: + return "(LINKUP)"; + case OPA_LINKINIT_REASON_FLAPPING: + return "(FLAPPING)"; + case OPA_LINKINIT_OUTSIDE_POLICY: + return "(OUTSIDE_POLICY)"; + case OPA_LINKINIT_QUARANTINED: + return "(QUARANTINED)"; + case OPA_LINKINIT_INSUFIC_CAPABILITY: + return "(INSUFIC_CAPABILITY)"; + default: + break; + } + } + return ""; +} + +/* + * driver_physical_state - convert the driver's notion of a port's + * state (an HLS_*) into a physical state (a {IB,OPA}_PORTPHYSSTATE_*). + * Return -1 (converted to a u32) to indicate error. + */ +u32 driver_physical_state(struct hfi1_pportdata *ppd) +{ + switch (ppd->host_link_state) { + case HLS_UP_INIT: + case HLS_UP_ARMED: + case HLS_UP_ACTIVE: + return IB_PORTPHYSSTATE_LINKUP; + case HLS_DN_POLL: + return IB_PORTPHYSSTATE_POLLING; + case HLS_DN_DISABLE: + return IB_PORTPHYSSTATE_DISABLED; + case HLS_DN_OFFLINE: + return OPA_PORTPHYSSTATE_OFFLINE; + case HLS_VERIFY_CAP: + return IB_PORTPHYSSTATE_POLLING; + case HLS_GOING_UP: + return IB_PORTPHYSSTATE_POLLING; + case HLS_GOING_OFFLINE: + return OPA_PORTPHYSSTATE_OFFLINE; + case HLS_LINK_COOLDOWN: + return OPA_PORTPHYSSTATE_OFFLINE; + case HLS_DN_DOWNDEF: + default: + dd_dev_err(ppd->dd, "invalid host_link_state 0x%x\n", + ppd->host_link_state); + return -1; + } +} + +/* + * driver_logical_state - convert the driver's notion of a port's + * state (an HLS_*) into a logical state (a IB_PORT_*). Return -1 + * (converted to a u32) to indicate error. + */ +u32 driver_logical_state(struct hfi1_pportdata *ppd) +{ + if (ppd->host_link_state && !(ppd->host_link_state & HLS_UP)) + return IB_PORT_DOWN; + + switch (ppd->host_link_state & HLS_UP) { + case HLS_UP_INIT: + return IB_PORT_INIT; + case HLS_UP_ARMED: + return IB_PORT_ARMED; + case HLS_UP_ACTIVE: + return IB_PORT_ACTIVE; + default: + dd_dev_err(ppd->dd, "invalid host_link_state 0x%x\n", + ppd->host_link_state); + return -1; + } +} + +void set_link_down_reason(struct hfi1_pportdata *ppd, u8 lcl_reason, + u8 neigh_reason, u8 rem_reason) +{ + if (ppd->local_link_down_reason.latest == 0 && + ppd->neigh_link_down_reason.latest == 0) { + ppd->local_link_down_reason.latest = lcl_reason; + ppd->neigh_link_down_reason.latest = neigh_reason; + ppd->remote_link_down_reason = rem_reason; + } +} + +/* + * Change the physical and/or logical link state. + * + * Do not call this routine while inside an interrupt. It contains + * calls to routines that can take multiple seconds to finish. + * + * Returns 0 on success, -errno on failure. + */ +int set_link_state(struct hfi1_pportdata *ppd, u32 state) +{ + struct hfi1_devdata *dd = ppd->dd; + struct ib_event event = {.device = NULL}; + int ret1, ret = 0; + int was_up, is_down; + int orig_new_state, poll_bounce; + + mutex_lock(&ppd->hls_lock); + + orig_new_state = state; + if (state == HLS_DN_DOWNDEF) + state = dd->link_default; + + /* interpret poll -> poll as a link bounce */ + poll_bounce = ppd->host_link_state == HLS_DN_POLL + && state == HLS_DN_POLL; + + dd_dev_info(dd, "%s: current %s, new %s %s%s\n", __func__, + link_state_name(ppd->host_link_state), + link_state_name(orig_new_state), + poll_bounce ? "(bounce) " : "", + link_state_reason_name(ppd, state)); + + was_up = !!(ppd->host_link_state & HLS_UP); + + /* + * If we're going to a (HLS_*) link state that implies the logical + * link state is neither of (IB_PORT_ARMED, IB_PORT_ACTIVE), then + * reset is_sm_config_started to 0. + */ + if (!(state & (HLS_UP_ARMED | HLS_UP_ACTIVE))) + ppd->is_sm_config_started = 0; + + /* + * Do nothing if the states match. Let a poll to poll link bounce + * go through. + */ + if (ppd->host_link_state == state && !poll_bounce) + goto done; + + switch (state) { + case HLS_UP_INIT: + if (ppd->host_link_state == HLS_DN_POLL && (quick_linkup + || dd->icode == ICODE_FUNCTIONAL_SIMULATOR)) { + /* + * Quick link up jumps from polling to here. + * + * Whether in normal or loopback mode, the + * simulator jumps from polling to link up. + * Accept that here. + */ + /* OK */; + } else if (ppd->host_link_state != HLS_GOING_UP) { + goto unexpected; + } + + ppd->host_link_state = HLS_UP_INIT; + ret = wait_logical_linkstate(ppd, IB_PORT_INIT, 1000); + if (ret) { + /* logical state didn't change, stay at going_up */ + ppd->host_link_state = HLS_GOING_UP; + dd_dev_err(dd, + "%s: logical state did not change to INIT\n", + __func__); + } else { + /* clear old transient LINKINIT_REASON code */ + if (ppd->linkinit_reason >= OPA_LINKINIT_REASON_CLEAR) + ppd->linkinit_reason = + OPA_LINKINIT_REASON_LINKUP; + + /* enable the port */ + add_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); + + handle_linkup_change(dd, 1); + } + break; + case HLS_UP_ARMED: + if (ppd->host_link_state != HLS_UP_INIT) + goto unexpected; + + ppd->host_link_state = HLS_UP_ARMED; + set_logical_state(dd, LSTATE_ARMED); + ret = wait_logical_linkstate(ppd, IB_PORT_ARMED, 1000); + if (ret) { + /* logical state didn't change, stay at init */ + ppd->host_link_state = HLS_UP_INIT; + dd_dev_err(dd, + "%s: logical state did not change to ARMED\n", + __func__); + } + /* + * The simulator does not currently implement SMA messages, + * so neighbor_normal is not set. Set it here when we first + * move to Armed. + */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) + ppd->neighbor_normal = 1; + break; + case HLS_UP_ACTIVE: + if (ppd->host_link_state != HLS_UP_ARMED) + goto unexpected; + + ppd->host_link_state = HLS_UP_ACTIVE; + set_logical_state(dd, LSTATE_ACTIVE); + ret = wait_logical_linkstate(ppd, IB_PORT_ACTIVE, 1000); + if (ret) { + /* logical state didn't change, stay at armed */ + ppd->host_link_state = HLS_UP_ARMED; + dd_dev_err(dd, + "%s: logical state did not change to ACTIVE\n", + __func__); + } else { + + /* tell all engines to go running */ + sdma_all_running(dd); + + /* Signal the IB layer that the port has went active */ + event.device = &dd->verbs_dev.ibdev; + event.element.port_num = ppd->port; + event.event = IB_EVENT_PORT_ACTIVE; + } + break; + case HLS_DN_POLL: + if ((ppd->host_link_state == HLS_DN_DISABLE || + ppd->host_link_state == HLS_DN_OFFLINE) && + dd->dc_shutdown) + dc_start(dd); + /* Hand LED control to the DC */ + write_csr(dd, DCC_CFG_LED_CNTRL, 0); + + if (ppd->host_link_state != HLS_DN_OFFLINE) { + u8 tmp = ppd->link_enabled; + + ret = goto_offline(ppd, ppd->remote_link_down_reason); + if (ret) { + ppd->link_enabled = tmp; + break; + } + ppd->remote_link_down_reason = 0; + + if (ppd->driver_link_ready) + ppd->link_enabled = 1; + } + + ret = set_local_link_attributes(ppd); + if (ret) + break; + + ppd->port_error_action = 0; + ppd->host_link_state = HLS_DN_POLL; + + if (quick_linkup) { + /* quick linkup does not go into polling */ + ret = do_quick_linkup(dd); + } else { + ret1 = set_physical_link_state(dd, PLS_POLLING); + if (ret1 != HCMD_SUCCESS) { + dd_dev_err(dd, + "Failed to transition to Polling link state, return 0x%x\n", + ret1); + ret = -EINVAL; + } + } + ppd->offline_disabled_reason = OPA_LINKDOWN_REASON_NONE; + /* + * If an error occurred above, go back to offline. The + * caller may reschedule another attempt. + */ + if (ret) + goto_offline(ppd, 0); + break; + case HLS_DN_DISABLE: + /* link is disabled */ + ppd->link_enabled = 0; + + /* allow any state to transition to disabled */ + + /* must transition to offline first */ + if (ppd->host_link_state != HLS_DN_OFFLINE) { + ret = goto_offline(ppd, ppd->remote_link_down_reason); + if (ret) + break; + ppd->remote_link_down_reason = 0; + } + + ret1 = set_physical_link_state(dd, PLS_DISABLED); + if (ret1 != HCMD_SUCCESS) { + dd_dev_err(dd, + "Failed to transition to Disabled link state, return 0x%x\n", + ret1); + ret = -EINVAL; + break; + } + ppd->host_link_state = HLS_DN_DISABLE; + dc_shutdown(dd); + break; + case HLS_DN_OFFLINE: + if (ppd->host_link_state == HLS_DN_DISABLE) + dc_start(dd); + + /* allow any state to transition to offline */ + ret = goto_offline(ppd, ppd->remote_link_down_reason); + if (!ret) + ppd->remote_link_down_reason = 0; + break; + case HLS_VERIFY_CAP: + if (ppd->host_link_state != HLS_DN_POLL) + goto unexpected; + ppd->host_link_state = HLS_VERIFY_CAP; + break; + case HLS_GOING_UP: + if (ppd->host_link_state != HLS_VERIFY_CAP) + goto unexpected; + + ret1 = set_physical_link_state(dd, PLS_LINKUP); + if (ret1 != HCMD_SUCCESS) { + dd_dev_err(dd, + "Failed to transition to link up state, return 0x%x\n", + ret1); + ret = -EINVAL; + break; + } + ppd->host_link_state = HLS_GOING_UP; + break; + + case HLS_GOING_OFFLINE: /* transient within goto_offline() */ + case HLS_LINK_COOLDOWN: /* transient within goto_offline() */ + default: + dd_dev_info(dd, "%s: state 0x%x: not supported\n", + __func__, state); + ret = -EINVAL; + break; + } + + is_down = !!(ppd->host_link_state & (HLS_DN_POLL | + HLS_DN_DISABLE | HLS_DN_OFFLINE)); + + if (was_up && is_down && ppd->local_link_down_reason.sma == 0 && + ppd->neigh_link_down_reason.sma == 0) { + ppd->local_link_down_reason.sma = + ppd->local_link_down_reason.latest; + ppd->neigh_link_down_reason.sma = + ppd->neigh_link_down_reason.latest; + } + + goto done; + +unexpected: + dd_dev_err(dd, "%s: unexpected state transition from %s to %s\n", + __func__, link_state_name(ppd->host_link_state), + link_state_name(state)); + ret = -EINVAL; + +done: + mutex_unlock(&ppd->hls_lock); + + if (event.device) + ib_dispatch_event(&event); + + return ret; +} + +int hfi1_set_ib_cfg(struct hfi1_pportdata *ppd, int which, u32 val) +{ + u64 reg; + int ret = 0; + + switch (which) { + case HFI1_IB_CFG_LIDLMC: + set_lidlmc(ppd); + break; + case HFI1_IB_CFG_VL_HIGH_LIMIT: + /* + * The VL Arbitrator high limit is sent in units of 4k + * bytes, while HFI stores it in units of 64 bytes. + */ + val *= 4096/64; + reg = ((u64)val & SEND_HIGH_PRIORITY_LIMIT_LIMIT_MASK) + << SEND_HIGH_PRIORITY_LIMIT_LIMIT_SHIFT; + write_csr(ppd->dd, SEND_HIGH_PRIORITY_LIMIT, reg); + break; + case HFI1_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* HFI only supports POLL as the default link down state */ + if (val != HLS_DN_POLL) + ret = -EINVAL; + break; + case HFI1_IB_CFG_OP_VLS: + if (ppd->vls_operational != val) { + ppd->vls_operational = val; + if (!ppd->port) + ret = -EINVAL; + else + ret = sdma_map_init( + ppd->dd, + ppd->port - 1, + val, + NULL); + } + break; + /* + * For link width, link width downgrade, and speed enable, always AND + * the setting with what is actually supported. This has two benefits. + * First, enabled can't have unsupported values, no matter what the + * SM or FM might want. Second, the ALL_SUPPORTED wildcards that mean + * "fill in with your supported value" have all the bits in the + * field set, so simply ANDing with supported has the desired result. + */ + case HFI1_IB_CFG_LWID_ENB: /* set allowed Link-width */ + ppd->link_width_enabled = val & ppd->link_width_supported; + break; + case HFI1_IB_CFG_LWID_DG_ENB: /* set allowed link width downgrade */ + ppd->link_width_downgrade_enabled = + val & ppd->link_width_downgrade_supported; + break; + case HFI1_IB_CFG_SPD_ENB: /* allowed Link speeds */ + ppd->link_speed_enabled = val & ppd->link_speed_supported; + break; + case HFI1_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + /* + * HFI does not follow IB specs, save this value + * so we can report it, if asked. + */ + ppd->overrun_threshold = val; + break; + case HFI1_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + /* + * HFI does not follow IB specs, save this value + * so we can report it, if asked. + */ + ppd->phy_error_threshold = val; + break; + + case HFI1_IB_CFG_MTU: + set_send_length(ppd); + break; + + case HFI1_IB_CFG_PKEYS: + if (HFI1_CAP_IS_KSET(PKEY_CHECK)) + set_partition_keys(ppd); + break; + + default: + if (HFI1_CAP_IS_KSET(PRINT_UNIMPL)) + dd_dev_info(ppd->dd, + "%s: which %s, val 0x%x: not implemented\n", + __func__, ib_cfg_name(which), val); + break; + } + return ret; +} + +/* begin functions related to vl arbitration table caching */ +static void init_vl_arb_caches(struct hfi1_pportdata *ppd) +{ + int i; + + BUILD_BUG_ON(VL_ARB_TABLE_SIZE != + VL_ARB_LOW_PRIO_TABLE_SIZE); + BUILD_BUG_ON(VL_ARB_TABLE_SIZE != + VL_ARB_HIGH_PRIO_TABLE_SIZE); + + /* + * Note that we always return values directly from the + * 'vl_arb_cache' (and do no CSR reads) in response to a + * 'Get(VLArbTable)'. This is obviously correct after a + * 'Set(VLArbTable)', since the cache will then be up to + * date. But it's also correct prior to any 'Set(VLArbTable)' + * since then both the cache, and the relevant h/w registers + * will be zeroed. + */ + + for (i = 0; i < MAX_PRIO_TABLE; i++) + spin_lock_init(&ppd->vl_arb_cache[i].lock); +} + +/* + * vl_arb_lock_cache + * + * All other vl_arb_* functions should be called only after locking + * the cache. + */ +static inline struct vl_arb_cache * +vl_arb_lock_cache(struct hfi1_pportdata *ppd, int idx) +{ + if (idx != LO_PRIO_TABLE && idx != HI_PRIO_TABLE) + return NULL; + spin_lock(&ppd->vl_arb_cache[idx].lock); + return &ppd->vl_arb_cache[idx]; +} + +static inline void vl_arb_unlock_cache(struct hfi1_pportdata *ppd, int idx) +{ + spin_unlock(&ppd->vl_arb_cache[idx].lock); +} + +static void vl_arb_get_cache(struct vl_arb_cache *cache, + struct ib_vl_weight_elem *vl) +{ + memcpy(vl, cache->table, VL_ARB_TABLE_SIZE * sizeof(*vl)); +} + +static void vl_arb_set_cache(struct vl_arb_cache *cache, + struct ib_vl_weight_elem *vl) +{ + memcpy(cache->table, vl, VL_ARB_TABLE_SIZE * sizeof(*vl)); +} + +static int vl_arb_match_cache(struct vl_arb_cache *cache, + struct ib_vl_weight_elem *vl) +{ + return !memcmp(cache->table, vl, VL_ARB_TABLE_SIZE * sizeof(*vl)); +} +/* end functions related to vl arbitration table caching */ + +static int set_vl_weights(struct hfi1_pportdata *ppd, u32 target, + u32 size, struct ib_vl_weight_elem *vl) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 reg; + unsigned int i, is_up = 0; + int drain, ret = 0; + + mutex_lock(&ppd->hls_lock); + + if (ppd->host_link_state & HLS_UP) + is_up = 1; + + drain = !is_ax(dd) && is_up; + + if (drain) + /* + * Before adjusting VL arbitration weights, empty per-VL + * FIFOs, otherwise a packet whose VL weight is being + * set to 0 could get stuck in a FIFO with no chance to + * egress. + */ + ret = stop_drain_data_vls(dd); + + if (ret) { + dd_dev_err( + dd, + "%s: cannot stop/drain VLs - refusing to change VL arbitration weights\n", + __func__); + goto err; + } + + for (i = 0; i < size; i++, vl++) { + /* + * NOTE: The low priority shift and mask are used here, but + * they are the same for both the low and high registers. + */ + reg = (((u64)vl->vl & SEND_LOW_PRIORITY_LIST_VL_MASK) + << SEND_LOW_PRIORITY_LIST_VL_SHIFT) + | (((u64)vl->weight + & SEND_LOW_PRIORITY_LIST_WEIGHT_MASK) + << SEND_LOW_PRIORITY_LIST_WEIGHT_SHIFT); + write_csr(dd, target + (i * 8), reg); + } + pio_send_control(dd, PSC_GLOBAL_VLARB_ENABLE); + + if (drain) + open_fill_data_vls(dd); /* reopen all VLs */ + +err: + mutex_unlock(&ppd->hls_lock); + + return ret; +} + +/* + * Read one credit merge VL register. + */ +static void read_one_cm_vl(struct hfi1_devdata *dd, u32 csr, + struct vl_limit *vll) +{ + u64 reg = read_csr(dd, csr); + + vll->dedicated = cpu_to_be16( + (reg >> SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SHIFT) + & SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_MASK); + vll->shared = cpu_to_be16( + (reg >> SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_SHIFT) + & SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_MASK); +} + +/* + * Read the current credit merge limits. + */ +static int get_buffer_control(struct hfi1_devdata *dd, + struct buffer_control *bc, u16 *overall_limit) +{ + u64 reg; + int i; + + /* not all entries are filled in */ + memset(bc, 0, sizeof(*bc)); + + /* OPA and HFI have a 1-1 mapping */ + for (i = 0; i < TXE_NUM_DATA_VL; i++) + read_one_cm_vl(dd, SEND_CM_CREDIT_VL + (8*i), &bc->vl[i]); + + /* NOTE: assumes that VL* and VL15 CSRs are bit-wise identical */ + read_one_cm_vl(dd, SEND_CM_CREDIT_VL15, &bc->vl[15]); + + reg = read_csr(dd, SEND_CM_GLOBAL_CREDIT); + bc->overall_shared_limit = cpu_to_be16( + (reg >> SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT) + & SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_MASK); + if (overall_limit) + *overall_limit = (reg + >> SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT) + & SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_MASK; + return sizeof(struct buffer_control); +} + +static int get_sc2vlnt(struct hfi1_devdata *dd, struct sc2vlnt *dp) +{ + u64 reg; + int i; + + /* each register contains 16 SC->VLnt mappings, 4 bits each */ + reg = read_csr(dd, DCC_CFG_SC_VL_TABLE_15_0); + for (i = 0; i < sizeof(u64); i++) { + u8 byte = *(((u8 *)®) + i); + + dp->vlnt[2 * i] = byte & 0xf; + dp->vlnt[(2 * i) + 1] = (byte & 0xf0) >> 4; + } + + reg = read_csr(dd, DCC_CFG_SC_VL_TABLE_31_16); + for (i = 0; i < sizeof(u64); i++) { + u8 byte = *(((u8 *)®) + i); + + dp->vlnt[16 + (2 * i)] = byte & 0xf; + dp->vlnt[16 + (2 * i) + 1] = (byte & 0xf0) >> 4; + } + return sizeof(struct sc2vlnt); +} + +static void get_vlarb_preempt(struct hfi1_devdata *dd, u32 nelems, + struct ib_vl_weight_elem *vl) +{ + unsigned int i; + + for (i = 0; i < nelems; i++, vl++) { + vl->vl = 0xf; + vl->weight = 0; + } +} + +static void set_sc2vlnt(struct hfi1_devdata *dd, struct sc2vlnt *dp) +{ + write_csr(dd, DCC_CFG_SC_VL_TABLE_15_0, + DC_SC_VL_VAL(15_0, + 0, dp->vlnt[0] & 0xf, + 1, dp->vlnt[1] & 0xf, + 2, dp->vlnt[2] & 0xf, + 3, dp->vlnt[3] & 0xf, + 4, dp->vlnt[4] & 0xf, + 5, dp->vlnt[5] & 0xf, + 6, dp->vlnt[6] & 0xf, + 7, dp->vlnt[7] & 0xf, + 8, dp->vlnt[8] & 0xf, + 9, dp->vlnt[9] & 0xf, + 10, dp->vlnt[10] & 0xf, + 11, dp->vlnt[11] & 0xf, + 12, dp->vlnt[12] & 0xf, + 13, dp->vlnt[13] & 0xf, + 14, dp->vlnt[14] & 0xf, + 15, dp->vlnt[15] & 0xf)); + write_csr(dd, DCC_CFG_SC_VL_TABLE_31_16, + DC_SC_VL_VAL(31_16, + 16, dp->vlnt[16] & 0xf, + 17, dp->vlnt[17] & 0xf, + 18, dp->vlnt[18] & 0xf, + 19, dp->vlnt[19] & 0xf, + 20, dp->vlnt[20] & 0xf, + 21, dp->vlnt[21] & 0xf, + 22, dp->vlnt[22] & 0xf, + 23, dp->vlnt[23] & 0xf, + 24, dp->vlnt[24] & 0xf, + 25, dp->vlnt[25] & 0xf, + 26, dp->vlnt[26] & 0xf, + 27, dp->vlnt[27] & 0xf, + 28, dp->vlnt[28] & 0xf, + 29, dp->vlnt[29] & 0xf, + 30, dp->vlnt[30] & 0xf, + 31, dp->vlnt[31] & 0xf)); +} + +static void nonzero_msg(struct hfi1_devdata *dd, int idx, const char *what, + u16 limit) +{ + if (limit != 0) + dd_dev_info(dd, "Invalid %s limit %d on VL %d, ignoring\n", + what, (int)limit, idx); +} + +/* change only the shared limit portion of SendCmGLobalCredit */ +static void set_global_shared(struct hfi1_devdata *dd, u16 limit) +{ + u64 reg; + + reg = read_csr(dd, SEND_CM_GLOBAL_CREDIT); + reg &= ~SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SMASK; + reg |= (u64)limit << SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT; + write_csr(dd, SEND_CM_GLOBAL_CREDIT, reg); +} + +/* change only the total credit limit portion of SendCmGLobalCredit */ +static void set_global_limit(struct hfi1_devdata *dd, u16 limit) +{ + u64 reg; + + reg = read_csr(dd, SEND_CM_GLOBAL_CREDIT); + reg &= ~SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SMASK; + reg |= (u64)limit << SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT; + write_csr(dd, SEND_CM_GLOBAL_CREDIT, reg); +} + +/* set the given per-VL shared limit */ +static void set_vl_shared(struct hfi1_devdata *dd, int vl, u16 limit) +{ + u64 reg; + u32 addr; + + if (vl < TXE_NUM_DATA_VL) + addr = SEND_CM_CREDIT_VL + (8 * vl); + else + addr = SEND_CM_CREDIT_VL15; + + reg = read_csr(dd, addr); + reg &= ~SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_SMASK; + reg |= (u64)limit << SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_SHIFT; + write_csr(dd, addr, reg); +} + +/* set the given per-VL dedicated limit */ +static void set_vl_dedicated(struct hfi1_devdata *dd, int vl, u16 limit) +{ + u64 reg; + u32 addr; + + if (vl < TXE_NUM_DATA_VL) + addr = SEND_CM_CREDIT_VL + (8 * vl); + else + addr = SEND_CM_CREDIT_VL15; + + reg = read_csr(dd, addr); + reg &= ~SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SMASK; + reg |= (u64)limit << SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SHIFT; + write_csr(dd, addr, reg); +} + +/* spin until the given per-VL status mask bits clear */ +static void wait_for_vl_status_clear(struct hfi1_devdata *dd, u64 mask, + const char *which) +{ + unsigned long timeout; + u64 reg; + + timeout = jiffies + msecs_to_jiffies(VL_STATUS_CLEAR_TIMEOUT); + while (1) { + reg = read_csr(dd, SEND_CM_CREDIT_USED_STATUS) & mask; + + if (reg == 0) + return; /* success */ + if (time_after(jiffies, timeout)) + break; /* timed out */ + udelay(1); + } + + dd_dev_err(dd, + "%s credit change status not clearing after %dms, mask 0x%llx, not clear 0x%llx\n", + which, VL_STATUS_CLEAR_TIMEOUT, mask, reg); + /* + * If this occurs, it is likely there was a credit loss on the link. + * The only recovery from that is a link bounce. + */ + dd_dev_err(dd, + "Continuing anyway. A credit loss may occur. Suggest a link bounce\n"); +} + +/* + * The number of credits on the VLs may be changed while everything + * is "live", but the following algorithm must be followed due to + * how the hardware is actually implemented. In particular, + * Return_Credit_Status[] is the only correct status check. + * + * if (reducing Global_Shared_Credit_Limit or any shared limit changing) + * set Global_Shared_Credit_Limit = 0 + * use_all_vl = 1 + * mask0 = all VLs that are changing either dedicated or shared limits + * set Shared_Limit[mask0] = 0 + * spin until Return_Credit_Status[use_all_vl ? all VL : mask0] == 0 + * if (changing any dedicated limit) + * mask1 = all VLs that are lowering dedicated limits + * lower Dedicated_Limit[mask1] + * spin until Return_Credit_Status[mask1] == 0 + * raise Dedicated_Limits + * raise Shared_Limits + * raise Global_Shared_Credit_Limit + * + * lower = if the new limit is lower, set the limit to the new value + * raise = if the new limit is higher than the current value (may be changed + * earlier in the algorithm), set the new limit to the new value + */ +static int set_buffer_control(struct hfi1_devdata *dd, + struct buffer_control *new_bc) +{ + u64 changing_mask, ld_mask, stat_mask; + int change_count; + int i, use_all_mask; + int this_shared_changing; + /* + * A0: add the variable any_shared_limit_changing below and in the + * algorithm above. If removing A0 support, it can be removed. + */ + int any_shared_limit_changing; + struct buffer_control cur_bc; + u8 changing[OPA_MAX_VLS]; + u8 lowering_dedicated[OPA_MAX_VLS]; + u16 cur_total; + u32 new_total = 0; + const u64 all_mask = + SEND_CM_CREDIT_USED_STATUS_VL0_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL1_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL2_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL3_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL4_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL5_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL6_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL7_RETURN_CREDIT_STATUS_SMASK + | SEND_CM_CREDIT_USED_STATUS_VL15_RETURN_CREDIT_STATUS_SMASK; + +#define valid_vl(idx) ((idx) < TXE_NUM_DATA_VL || (idx) == 15) +#define NUM_USABLE_VLS 16 /* look at VL15 and less */ + + + /* find the new total credits, do sanity check on unused VLs */ + for (i = 0; i < OPA_MAX_VLS; i++) { + if (valid_vl(i)) { + new_total += be16_to_cpu(new_bc->vl[i].dedicated); + continue; + } + nonzero_msg(dd, i, "dedicated", + be16_to_cpu(new_bc->vl[i].dedicated)); + nonzero_msg(dd, i, "shared", + be16_to_cpu(new_bc->vl[i].shared)); + new_bc->vl[i].dedicated = 0; + new_bc->vl[i].shared = 0; + } + new_total += be16_to_cpu(new_bc->overall_shared_limit); + if (new_total > (u32)dd->link_credits) + return -EINVAL; + /* fetch the current values */ + get_buffer_control(dd, &cur_bc, &cur_total); + + /* + * Create the masks we will use. + */ + memset(changing, 0, sizeof(changing)); + memset(lowering_dedicated, 0, sizeof(lowering_dedicated)); + /* NOTE: Assumes that the individual VL bits are adjacent and in + increasing order */ + stat_mask = + SEND_CM_CREDIT_USED_STATUS_VL0_RETURN_CREDIT_STATUS_SMASK; + changing_mask = 0; + ld_mask = 0; + change_count = 0; + any_shared_limit_changing = 0; + for (i = 0; i < NUM_USABLE_VLS; i++, stat_mask <<= 1) { + if (!valid_vl(i)) + continue; + this_shared_changing = new_bc->vl[i].shared + != cur_bc.vl[i].shared; + if (this_shared_changing) + any_shared_limit_changing = 1; + if (new_bc->vl[i].dedicated != cur_bc.vl[i].dedicated + || this_shared_changing) { + changing[i] = 1; + changing_mask |= stat_mask; + change_count++; + } + if (be16_to_cpu(new_bc->vl[i].dedicated) < + be16_to_cpu(cur_bc.vl[i].dedicated)) { + lowering_dedicated[i] = 1; + ld_mask |= stat_mask; + } + } + + /* bracket the credit change with a total adjustment */ + if (new_total > cur_total) + set_global_limit(dd, new_total); + + /* + * Start the credit change algorithm. + */ + use_all_mask = 0; + if ((be16_to_cpu(new_bc->overall_shared_limit) < + be16_to_cpu(cur_bc.overall_shared_limit)) + || (is_a0(dd) && any_shared_limit_changing)) { + set_global_shared(dd, 0); + cur_bc.overall_shared_limit = 0; + use_all_mask = 1; + } + + for (i = 0; i < NUM_USABLE_VLS; i++) { + if (!valid_vl(i)) + continue; + + if (changing[i]) { + set_vl_shared(dd, i, 0); + cur_bc.vl[i].shared = 0; + } + } + + wait_for_vl_status_clear(dd, use_all_mask ? all_mask : changing_mask, + "shared"); + + if (change_count > 0) { + for (i = 0; i < NUM_USABLE_VLS; i++) { + if (!valid_vl(i)) + continue; + + if (lowering_dedicated[i]) { + set_vl_dedicated(dd, i, + be16_to_cpu(new_bc->vl[i].dedicated)); + cur_bc.vl[i].dedicated = + new_bc->vl[i].dedicated; + } + } + + wait_for_vl_status_clear(dd, ld_mask, "dedicated"); + + /* now raise all dedicated that are going up */ + for (i = 0; i < NUM_USABLE_VLS; i++) { + if (!valid_vl(i)) + continue; + + if (be16_to_cpu(new_bc->vl[i].dedicated) > + be16_to_cpu(cur_bc.vl[i].dedicated)) + set_vl_dedicated(dd, i, + be16_to_cpu(new_bc->vl[i].dedicated)); + } + } + + /* next raise all shared that are going up */ + for (i = 0; i < NUM_USABLE_VLS; i++) { + if (!valid_vl(i)) + continue; + + if (be16_to_cpu(new_bc->vl[i].shared) > + be16_to_cpu(cur_bc.vl[i].shared)) + set_vl_shared(dd, i, be16_to_cpu(new_bc->vl[i].shared)); + } + + /* finally raise the global shared */ + if (be16_to_cpu(new_bc->overall_shared_limit) > + be16_to_cpu(cur_bc.overall_shared_limit)) + set_global_shared(dd, + be16_to_cpu(new_bc->overall_shared_limit)); + + /* bracket the credit change with a total adjustment */ + if (new_total < cur_total) + set_global_limit(dd, new_total); + return 0; +} + +/* + * Read the given fabric manager table. Return the size of the + * table (in bytes) on success, and a negative error code on + * failure. + */ +int fm_get_table(struct hfi1_pportdata *ppd, int which, void *t) + +{ + int size; + struct vl_arb_cache *vlc; + + switch (which) { + case FM_TBL_VL_HIGH_ARB: + size = 256; + /* + * OPA specifies 128 elements (of 2 bytes each), though + * HFI supports only 16 elements in h/w. + */ + vlc = vl_arb_lock_cache(ppd, HI_PRIO_TABLE); + vl_arb_get_cache(vlc, t); + vl_arb_unlock_cache(ppd, HI_PRIO_TABLE); + break; + case FM_TBL_VL_LOW_ARB: + size = 256; + /* + * OPA specifies 128 elements (of 2 bytes each), though + * HFI supports only 16 elements in h/w. + */ + vlc = vl_arb_lock_cache(ppd, LO_PRIO_TABLE); + vl_arb_get_cache(vlc, t); + vl_arb_unlock_cache(ppd, LO_PRIO_TABLE); + break; + case FM_TBL_BUFFER_CONTROL: + size = get_buffer_control(ppd->dd, t, NULL); + break; + case FM_TBL_SC2VLNT: + size = get_sc2vlnt(ppd->dd, t); + break; + case FM_TBL_VL_PREEMPT_ELEMS: + size = 256; + /* OPA specifies 128 elements, of 2 bytes each */ + get_vlarb_preempt(ppd->dd, OPA_MAX_VLS, t); + break; + case FM_TBL_VL_PREEMPT_MATRIX: + size = 256; + /* + * OPA specifies that this is the same size as the VL + * arbitration tables (i.e., 256 bytes). + */ + break; + default: + return -EINVAL; + } + return size; +} + +/* + * Write the given fabric manager table. + */ +int fm_set_table(struct hfi1_pportdata *ppd, int which, void *t) +{ + int ret = 0; + struct vl_arb_cache *vlc; + + switch (which) { + case FM_TBL_VL_HIGH_ARB: + vlc = vl_arb_lock_cache(ppd, HI_PRIO_TABLE); + if (vl_arb_match_cache(vlc, t)) { + vl_arb_unlock_cache(ppd, HI_PRIO_TABLE); + break; + } + vl_arb_set_cache(vlc, t); + vl_arb_unlock_cache(ppd, HI_PRIO_TABLE); + ret = set_vl_weights(ppd, SEND_HIGH_PRIORITY_LIST, + VL_ARB_HIGH_PRIO_TABLE_SIZE, t); + break; + case FM_TBL_VL_LOW_ARB: + vlc = vl_arb_lock_cache(ppd, LO_PRIO_TABLE); + if (vl_arb_match_cache(vlc, t)) { + vl_arb_unlock_cache(ppd, LO_PRIO_TABLE); + break; + } + vl_arb_set_cache(vlc, t); + vl_arb_unlock_cache(ppd, LO_PRIO_TABLE); + ret = set_vl_weights(ppd, SEND_LOW_PRIORITY_LIST, + VL_ARB_LOW_PRIO_TABLE_SIZE, t); + break; + case FM_TBL_BUFFER_CONTROL: + ret = set_buffer_control(ppd->dd, t); + break; + case FM_TBL_SC2VLNT: + set_sc2vlnt(ppd->dd, t); + break; + default: + ret = -EINVAL; + } + return ret; +} + +/* + * Disable all data VLs. + * + * Return 0 if disabled, non-zero if the VLs cannot be disabled. + */ +static int disable_data_vls(struct hfi1_devdata *dd) +{ + if (is_a0(dd)) + return 1; + + pio_send_control(dd, PSC_DATA_VL_DISABLE); + + return 0; +} + +/* + * open_fill_data_vls() - the counterpart to stop_drain_data_vls(). + * Just re-enables all data VLs (the "fill" part happens + * automatically - the name was chosen for symmetry with + * stop_drain_data_vls()). + * + * Return 0 if successful, non-zero if the VLs cannot be enabled. + */ +int open_fill_data_vls(struct hfi1_devdata *dd) +{ + if (is_a0(dd)) + return 1; + + pio_send_control(dd, PSC_DATA_VL_ENABLE); + + return 0; +} + +/* + * drain_data_vls() - assumes that disable_data_vls() has been called, + * wait for occupancy (of per-VL FIFOs) for all contexts, and SDMA + * engines to drop to 0. + */ +static void drain_data_vls(struct hfi1_devdata *dd) +{ + sc_wait(dd); + sdma_wait(dd); + pause_for_credit_return(dd); +} + +/* + * stop_drain_data_vls() - disable, then drain all per-VL fifos. + * + * Use open_fill_data_vls() to resume using data VLs. This pair is + * meant to be used like this: + * + * stop_drain_data_vls(dd); + * // do things with per-VL resources + * open_fill_data_vls(dd); + */ +int stop_drain_data_vls(struct hfi1_devdata *dd) +{ + int ret; + + ret = disable_data_vls(dd); + if (ret == 0) + drain_data_vls(dd); + + return ret; +} + +/* + * Convert a nanosecond time to a cclock count. No matter how slow + * the cclock, a non-zero ns will always have a non-zero result. + */ +u32 ns_to_cclock(struct hfi1_devdata *dd, u32 ns) +{ + u32 cclocks; + + if (dd->icode == ICODE_FPGA_EMULATION) + cclocks = (ns * 1000) / FPGA_CCLOCK_PS; + else /* simulation pretends to be ASIC */ + cclocks = (ns * 1000) / ASIC_CCLOCK_PS; + if (ns && !cclocks) /* if ns nonzero, must be at least 1 */ + cclocks = 1; + return cclocks; +} + +/* + * Convert a cclock count to nanoseconds. Not matter how slow + * the cclock, a non-zero cclocks will always have a non-zero result. + */ +u32 cclock_to_ns(struct hfi1_devdata *dd, u32 cclocks) +{ + u32 ns; + + if (dd->icode == ICODE_FPGA_EMULATION) + ns = (cclocks * FPGA_CCLOCK_PS) / 1000; + else /* simulation pretends to be ASIC */ + ns = (cclocks * ASIC_CCLOCK_PS) / 1000; + if (cclocks && !ns) + ns = 1; + return ns; +} + +/* + * Dynamically adjust the receive interrupt timeout for a context based on + * incoming packet rate. + * + * NOTE: Dynamic adjustment does not allow rcv_intr_count to be zero. + */ +static void adjust_rcv_timeout(struct hfi1_ctxtdata *rcd, u32 npkts) +{ + struct hfi1_devdata *dd = rcd->dd; + u32 timeout = rcd->rcvavail_timeout; + + /* + * This algorithm doubles or halves the timeout depending on whether + * the number of packets received in this interrupt were less than or + * greater equal the interrupt count. + * + * The calculations below do not allow a steady state to be achieved. + * Only at the endpoints it is possible to have an unchanging + * timeout. + */ + if (npkts < rcv_intr_count) { + /* + * Not enough packets arrived before the timeout, adjust + * timeout downward. + */ + if (timeout < 2) /* already at minimum? */ + return; + timeout >>= 1; + } else { + /* + * More than enough packets arrived before the timeout, adjust + * timeout upward. + */ + if (timeout >= dd->rcv_intr_timeout_csr) /* already at max? */ + return; + timeout = min(timeout << 1, dd->rcv_intr_timeout_csr); + } + + rcd->rcvavail_timeout = timeout; + /* timeout cannot be larger than rcv_intr_timeout_csr which has already + been verified to be in range */ + write_kctxt_csr(dd, rcd->ctxt, RCV_AVAIL_TIME_OUT, + (u64)timeout << RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_SHIFT); +} + +void update_usrhead(struct hfi1_ctxtdata *rcd, u32 hd, u32 updegr, u32 egrhd, + u32 intr_adjust, u32 npkts) +{ + struct hfi1_devdata *dd = rcd->dd; + u64 reg; + u32 ctxt = rcd->ctxt; + + /* + * Need to write timeout register before updating RcvHdrHead to ensure + * that a new value is used when the HW decides to restart counting. + */ + if (intr_adjust) + adjust_rcv_timeout(rcd, npkts); + if (updegr) { + reg = (egrhd & RCV_EGR_INDEX_HEAD_HEAD_MASK) + << RCV_EGR_INDEX_HEAD_HEAD_SHIFT; + write_uctxt_csr(dd, ctxt, RCV_EGR_INDEX_HEAD, reg); + } + mmiowb(); + reg = ((u64)rcv_intr_count << RCV_HDR_HEAD_COUNTER_SHIFT) | + (((u64)hd & RCV_HDR_HEAD_HEAD_MASK) + << RCV_HDR_HEAD_HEAD_SHIFT); + write_uctxt_csr(dd, ctxt, RCV_HDR_HEAD, reg); + mmiowb(); +} + +u32 hdrqempty(struct hfi1_ctxtdata *rcd) +{ + u32 head, tail; + + head = (read_uctxt_csr(rcd->dd, rcd->ctxt, RCV_HDR_HEAD) + & RCV_HDR_HEAD_HEAD_SMASK) >> RCV_HDR_HEAD_HEAD_SHIFT; + + if (rcd->rcvhdrtail_kvaddr) + tail = get_rcvhdrtail(rcd); + else + tail = read_uctxt_csr(rcd->dd, rcd->ctxt, RCV_HDR_TAIL); + + return head == tail; +} + +/* + * Context Control and Receive Array encoding for buffer size: + * 0x0 invalid + * 0x1 4 KB + * 0x2 8 KB + * 0x3 16 KB + * 0x4 32 KB + * 0x5 64 KB + * 0x6 128 KB + * 0x7 256 KB + * 0x8 512 KB (Receive Array only) + * 0x9 1 MB (Receive Array only) + * 0xa 2 MB (Receive Array only) + * + * 0xB-0xF - reserved (Receive Array only) + * + * + * This routine assumes that the value has already been sanity checked. + */ +static u32 encoded_size(u32 size) +{ + switch (size) { + case 4*1024: return 0x1; + case 8*1024: return 0x2; + case 16*1024: return 0x3; + case 32*1024: return 0x4; + case 64*1024: return 0x5; + case 128*1024: return 0x6; + case 256*1024: return 0x7; + case 512*1024: return 0x8; + case 1*1024*1024: return 0x9; + case 2*1024*1024: return 0xa; + } + return 0x1; /* if invalid, go with the minimum size */ +} + +void hfi1_rcvctrl(struct hfi1_devdata *dd, unsigned int op, int ctxt) +{ + struct hfi1_ctxtdata *rcd; + u64 rcvctrl, reg; + int did_enable = 0; + + rcd = dd->rcd[ctxt]; + if (!rcd) + return; + + hfi1_cdbg(RCVCTRL, "ctxt %d op 0x%x", ctxt, op); + + rcvctrl = read_kctxt_csr(dd, ctxt, RCV_CTXT_CTRL); + /* if the context already enabled, don't do the extra steps */ + if ((op & HFI1_RCVCTRL_CTXT_ENB) + && !(rcvctrl & RCV_CTXT_CTRL_ENABLE_SMASK)) { + /* reset the tail and hdr addresses, and sequence count */ + write_kctxt_csr(dd, ctxt, RCV_HDR_ADDR, + rcd->rcvhdrq_phys); + if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) + write_kctxt_csr(dd, ctxt, RCV_HDR_TAIL_ADDR, + rcd->rcvhdrqtailaddr_phys); + rcd->seq_cnt = 1; + + /* reset the cached receive header queue head value */ + rcd->head = 0; + + /* + * Zero the receive header queue so we don't get false + * positives when checking the sequence number. The + * sequence numbers could land exactly on the same spot. + * E.g. a rcd restart before the receive header wrapped. + */ + memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size); + + /* starting timeout */ + rcd->rcvavail_timeout = dd->rcv_intr_timeout_csr; + + /* enable the context */ + rcvctrl |= RCV_CTXT_CTRL_ENABLE_SMASK; + + /* clean the egr buffer size first */ + rcvctrl &= ~RCV_CTXT_CTRL_EGR_BUF_SIZE_SMASK; + rcvctrl |= ((u64)encoded_size(rcd->egrbufs.rcvtid_size) + & RCV_CTXT_CTRL_EGR_BUF_SIZE_MASK) + << RCV_CTXT_CTRL_EGR_BUF_SIZE_SHIFT; + + /* zero RcvHdrHead - set RcvHdrHead.Counter after enable */ + write_uctxt_csr(dd, ctxt, RCV_HDR_HEAD, 0); + did_enable = 1; + + /* zero RcvEgrIndexHead */ + write_uctxt_csr(dd, ctxt, RCV_EGR_INDEX_HEAD, 0); + + /* set eager count and base index */ + reg = (((u64)(rcd->egrbufs.alloced >> RCV_SHIFT) + & RCV_EGR_CTRL_EGR_CNT_MASK) + << RCV_EGR_CTRL_EGR_CNT_SHIFT) | + (((rcd->eager_base >> RCV_SHIFT) + & RCV_EGR_CTRL_EGR_BASE_INDEX_MASK) + << RCV_EGR_CTRL_EGR_BASE_INDEX_SHIFT); + write_kctxt_csr(dd, ctxt, RCV_EGR_CTRL, reg); + + /* + * Set TID (expected) count and base index. + * rcd->expected_count is set to individual RcvArray entries, + * not pairs, and the CSR takes a pair-count in groups of + * four, so divide by 8. + */ + reg = (((rcd->expected_count >> RCV_SHIFT) + & RCV_TID_CTRL_TID_PAIR_CNT_MASK) + << RCV_TID_CTRL_TID_PAIR_CNT_SHIFT) | + (((rcd->expected_base >> RCV_SHIFT) + & RCV_TID_CTRL_TID_BASE_INDEX_MASK) + << RCV_TID_CTRL_TID_BASE_INDEX_SHIFT); + write_kctxt_csr(dd, ctxt, RCV_TID_CTRL, reg); + if (ctxt == VL15CTXT) + write_csr(dd, RCV_VL15, VL15CTXT); + } + if (op & HFI1_RCVCTRL_CTXT_DIS) { + write_csr(dd, RCV_VL15, 0); + rcvctrl &= ~RCV_CTXT_CTRL_ENABLE_SMASK; + } + if (op & HFI1_RCVCTRL_INTRAVAIL_ENB) + rcvctrl |= RCV_CTXT_CTRL_INTR_AVAIL_SMASK; + if (op & HFI1_RCVCTRL_INTRAVAIL_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_INTR_AVAIL_SMASK; + if (op & HFI1_RCVCTRL_TAILUPD_ENB && rcd->rcvhdrqtailaddr_phys) + rcvctrl |= RCV_CTXT_CTRL_TAIL_UPD_SMASK; + if (op & HFI1_RCVCTRL_TAILUPD_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_TAIL_UPD_SMASK; + if (op & HFI1_RCVCTRL_TIDFLOW_ENB) + rcvctrl |= RCV_CTXT_CTRL_TID_FLOW_ENABLE_SMASK; + if (op & HFI1_RCVCTRL_TIDFLOW_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_TID_FLOW_ENABLE_SMASK; + if (op & HFI1_RCVCTRL_ONE_PKT_EGR_ENB) { + /* In one-packet-per-eager mode, the size comes from + the RcvArray entry. */ + rcvctrl &= ~RCV_CTXT_CTRL_EGR_BUF_SIZE_SMASK; + rcvctrl |= RCV_CTXT_CTRL_ONE_PACKET_PER_EGR_BUFFER_SMASK; + } + if (op & HFI1_RCVCTRL_ONE_PKT_EGR_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_ONE_PACKET_PER_EGR_BUFFER_SMASK; + if (op & HFI1_RCVCTRL_NO_RHQ_DROP_ENB) + rcvctrl |= RCV_CTXT_CTRL_DONT_DROP_RHQ_FULL_SMASK; + if (op & HFI1_RCVCTRL_NO_RHQ_DROP_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_DONT_DROP_RHQ_FULL_SMASK; + if (op & HFI1_RCVCTRL_NO_EGR_DROP_ENB) + rcvctrl |= RCV_CTXT_CTRL_DONT_DROP_EGR_FULL_SMASK; + if (op & HFI1_RCVCTRL_NO_EGR_DROP_DIS) + rcvctrl &= ~RCV_CTXT_CTRL_DONT_DROP_EGR_FULL_SMASK; + rcd->rcvctrl = rcvctrl; + hfi1_cdbg(RCVCTRL, "ctxt %d rcvctrl 0x%llx\n", ctxt, rcvctrl); + write_kctxt_csr(dd, ctxt, RCV_CTXT_CTRL, rcd->rcvctrl); + + /* work around sticky RcvCtxtStatus.BlockedRHQFull */ + if (did_enable + && (rcvctrl & RCV_CTXT_CTRL_DONT_DROP_RHQ_FULL_SMASK)) { + reg = read_kctxt_csr(dd, ctxt, RCV_CTXT_STATUS); + if (reg != 0) { + dd_dev_info(dd, "ctxt %d status %lld (blocked)\n", + ctxt, reg); + read_uctxt_csr(dd, ctxt, RCV_HDR_HEAD); + write_uctxt_csr(dd, ctxt, RCV_HDR_HEAD, 0x10); + write_uctxt_csr(dd, ctxt, RCV_HDR_HEAD, 0x00); + read_uctxt_csr(dd, ctxt, RCV_HDR_HEAD); + reg = read_kctxt_csr(dd, ctxt, RCV_CTXT_STATUS); + dd_dev_info(dd, "ctxt %d status %lld (%s blocked)\n", + ctxt, reg, reg == 0 ? "not" : "still"); + } + } + + if (did_enable) { + /* + * The interrupt timeout and count must be set after + * the context is enabled to take effect. + */ + /* set interrupt timeout */ + write_kctxt_csr(dd, ctxt, RCV_AVAIL_TIME_OUT, + (u64)rcd->rcvavail_timeout << + RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_SHIFT); + + /* set RcvHdrHead.Counter, zero RcvHdrHead.Head (again) */ + reg = (u64)rcv_intr_count << RCV_HDR_HEAD_COUNTER_SHIFT; + write_uctxt_csr(dd, ctxt, RCV_HDR_HEAD, reg); + } + + if (op & (HFI1_RCVCTRL_TAILUPD_DIS | HFI1_RCVCTRL_CTXT_DIS)) + /* + * If the context has been disabled and the Tail Update has + * been cleared, clear the RCV_HDR_TAIL_ADDR CSR so + * it doesn't contain an address that is invalid. + */ + write_kctxt_csr(dd, ctxt, RCV_HDR_TAIL_ADDR, 0); +} + +u32 hfi1_read_cntrs(struct hfi1_devdata *dd, loff_t pos, char **namep, + u64 **cntrp) +{ + int ret; + u64 val = 0; + + if (namep) { + ret = dd->cntrnameslen; + if (pos != 0) { + dd_dev_err(dd, "read_cntrs does not support indexing"); + return 0; + } + *namep = dd->cntrnames; + } else { + const struct cntr_entry *entry; + int i, j; + + ret = (dd->ndevcntrs) * sizeof(u64); + if (pos != 0) { + dd_dev_err(dd, "read_cntrs does not support indexing"); + return 0; + } + + /* Get the start of the block of counters */ + *cntrp = dd->cntrs; + + /* + * Now go and fill in each counter in the block. + */ + for (i = 0; i < DEV_CNTR_LAST; i++) { + entry = &dev_cntrs[i]; + hfi1_cdbg(CNTR, "reading %s", entry->name); + if (entry->flags & CNTR_DISABLED) { + /* Nothing */ + hfi1_cdbg(CNTR, "\tDisabled\n"); + } else { + if (entry->flags & CNTR_VL) { + hfi1_cdbg(CNTR, "\tPer VL\n"); + for (j = 0; j < C_VL_COUNT; j++) { + val = entry->rw_cntr(entry, + dd, j, + CNTR_MODE_R, + 0); + hfi1_cdbg( + CNTR, + "\t\tRead 0x%llx for %d\n", + val, j); + dd->cntrs[entry->offset + j] = + val; + } + } else { + val = entry->rw_cntr(entry, dd, + CNTR_INVALID_VL, + CNTR_MODE_R, 0); + dd->cntrs[entry->offset] = val; + hfi1_cdbg(CNTR, "\tRead 0x%llx", val); + } + } + } + } + return ret; +} + +/* + * Used by sysfs to create files for hfi stats to read + */ +u32 hfi1_read_portcntrs(struct hfi1_devdata *dd, loff_t pos, u32 port, + char **namep, u64 **cntrp) +{ + int ret; + u64 val = 0; + + if (namep) { + ret = dd->portcntrnameslen; + if (pos != 0) { + dd_dev_err(dd, "index not supported"); + return 0; + } + *namep = dd->portcntrnames; + } else { + const struct cntr_entry *entry; + struct hfi1_pportdata *ppd; + int i, j; + + ret = (dd->nportcntrs) * sizeof(u64); + if (pos != 0) { + dd_dev_err(dd, "indexing not supported"); + return 0; + } + ppd = (struct hfi1_pportdata *)(dd + 1 + port); + *cntrp = ppd->cntrs; + + for (i = 0; i < PORT_CNTR_LAST; i++) { + entry = &port_cntrs[i]; + hfi1_cdbg(CNTR, "reading %s", entry->name); + if (entry->flags & CNTR_DISABLED) { + /* Nothing */ + hfi1_cdbg(CNTR, "\tDisabled\n"); + continue; + } + + if (entry->flags & CNTR_VL) { + hfi1_cdbg(CNTR, "\tPer VL"); + for (j = 0; j < C_VL_COUNT; j++) { + val = entry->rw_cntr(entry, ppd, j, + CNTR_MODE_R, + 0); + hfi1_cdbg( + CNTR, + "\t\tRead 0x%llx for %d", + val, j); + ppd->cntrs[entry->offset + j] = val; + } + } else { + val = entry->rw_cntr(entry, ppd, + CNTR_INVALID_VL, + CNTR_MODE_R, + 0); + ppd->cntrs[entry->offset] = val; + hfi1_cdbg(CNTR, "\tRead 0x%llx", val); + } + } + } + return ret; +} + +static void free_cntrs(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int i; + + if (dd->synth_stats_timer.data) + del_timer_sync(&dd->synth_stats_timer); + dd->synth_stats_timer.data = 0; + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + kfree(ppd->cntrs); + kfree(ppd->scntrs); + free_percpu(ppd->ibport_data.rc_acks); + free_percpu(ppd->ibport_data.rc_qacks); + free_percpu(ppd->ibport_data.rc_delayed_comp); + ppd->cntrs = NULL; + ppd->scntrs = NULL; + ppd->ibport_data.rc_acks = NULL; + ppd->ibport_data.rc_qacks = NULL; + ppd->ibport_data.rc_delayed_comp = NULL; + } + kfree(dd->portcntrnames); + dd->portcntrnames = NULL; + kfree(dd->cntrs); + dd->cntrs = NULL; + kfree(dd->scntrs); + dd->scntrs = NULL; + kfree(dd->cntrnames); + dd->cntrnames = NULL; +} + +#define CNTR_MAX 0xFFFFFFFFFFFFFFFFULL +#define CNTR_32BIT_MAX 0x00000000FFFFFFFF + +static u64 read_dev_port_cntr(struct hfi1_devdata *dd, struct cntr_entry *entry, + u64 *psval, void *context, int vl) +{ + u64 val; + u64 sval = *psval; + + if (entry->flags & CNTR_DISABLED) { + dd_dev_err(dd, "Counter %s not enabled", entry->name); + return 0; + } + + hfi1_cdbg(CNTR, "cntr: %s vl %d psval 0x%llx", entry->name, vl, *psval); + + val = entry->rw_cntr(entry, context, vl, CNTR_MODE_R, 0); + + /* If its a synthetic counter there is more work we need to do */ + if (entry->flags & CNTR_SYNTH) { + if (sval == CNTR_MAX) { + /* No need to read already saturated */ + return CNTR_MAX; + } + + if (entry->flags & CNTR_32BIT) { + /* 32bit counters can wrap multiple times */ + u64 upper = sval >> 32; + u64 lower = (sval << 32) >> 32; + + if (lower > val) { /* hw wrapped */ + if (upper == CNTR_32BIT_MAX) + val = CNTR_MAX; + else + upper++; + } + + if (val != CNTR_MAX) + val = (upper << 32) | val; + + } else { + /* If we rolled we are saturated */ + if ((val < sval) || (val > CNTR_MAX)) + val = CNTR_MAX; + } + } + + *psval = val; + + hfi1_cdbg(CNTR, "\tNew val=0x%llx", val); + + return val; +} + +static u64 write_dev_port_cntr(struct hfi1_devdata *dd, + struct cntr_entry *entry, + u64 *psval, void *context, int vl, u64 data) +{ + u64 val; + + if (entry->flags & CNTR_DISABLED) { + dd_dev_err(dd, "Counter %s not enabled", entry->name); + return 0; + } + + hfi1_cdbg(CNTR, "cntr: %s vl %d psval 0x%llx", entry->name, vl, *psval); + + if (entry->flags & CNTR_SYNTH) { + *psval = data; + if (entry->flags & CNTR_32BIT) { + val = entry->rw_cntr(entry, context, vl, CNTR_MODE_W, + (data << 32) >> 32); + val = data; /* return the full 64bit value */ + } else { + val = entry->rw_cntr(entry, context, vl, CNTR_MODE_W, + data); + } + } else { + val = entry->rw_cntr(entry, context, vl, CNTR_MODE_W, data); + } + + *psval = val; + + hfi1_cdbg(CNTR, "\tNew val=0x%llx", val); + + return val; +} + +u64 read_dev_cntr(struct hfi1_devdata *dd, int index, int vl) +{ + struct cntr_entry *entry; + u64 *sval; + + entry = &dev_cntrs[index]; + sval = dd->scntrs + entry->offset; + + if (vl != CNTR_INVALID_VL) + sval += vl; + + return read_dev_port_cntr(dd, entry, sval, dd, vl); +} + +u64 write_dev_cntr(struct hfi1_devdata *dd, int index, int vl, u64 data) +{ + struct cntr_entry *entry; + u64 *sval; + + entry = &dev_cntrs[index]; + sval = dd->scntrs + entry->offset; + + if (vl != CNTR_INVALID_VL) + sval += vl; + + return write_dev_port_cntr(dd, entry, sval, dd, vl, data); +} + +u64 read_port_cntr(struct hfi1_pportdata *ppd, int index, int vl) +{ + struct cntr_entry *entry; + u64 *sval; + + entry = &port_cntrs[index]; + sval = ppd->scntrs + entry->offset; + + if (vl != CNTR_INVALID_VL) + sval += vl; + + if ((index >= C_RCV_HDR_OVF_FIRST + ppd->dd->num_rcv_contexts) && + (index <= C_RCV_HDR_OVF_LAST)) { + /* We do not want to bother for disabled contexts */ + return 0; + } + + return read_dev_port_cntr(ppd->dd, entry, sval, ppd, vl); +} + +u64 write_port_cntr(struct hfi1_pportdata *ppd, int index, int vl, u64 data) +{ + struct cntr_entry *entry; + u64 *sval; + + entry = &port_cntrs[index]; + sval = ppd->scntrs + entry->offset; + + if (vl != CNTR_INVALID_VL) + sval += vl; + + if ((index >= C_RCV_HDR_OVF_FIRST + ppd->dd->num_rcv_contexts) && + (index <= C_RCV_HDR_OVF_LAST)) { + /* We do not want to bother for disabled contexts */ + return 0; + } + + return write_dev_port_cntr(ppd->dd, entry, sval, ppd, vl, data); +} + +static void update_synth_timer(unsigned long opaque) +{ + u64 cur_tx; + u64 cur_rx; + u64 total_flits; + u8 update = 0; + int i, j, vl; + struct hfi1_pportdata *ppd; + struct cntr_entry *entry; + + struct hfi1_devdata *dd = (struct hfi1_devdata *)opaque; + + /* + * Rather than keep beating on the CSRs pick a minimal set that we can + * check to watch for potential roll over. We can do this by looking at + * the number of flits sent/recv. If the total flits exceeds 32bits then + * we have to iterate all the counters and update. + */ + entry = &dev_cntrs[C_DC_RCV_FLITS]; + cur_rx = entry->rw_cntr(entry, dd, CNTR_INVALID_VL, CNTR_MODE_R, 0); + + entry = &dev_cntrs[C_DC_XMIT_FLITS]; + cur_tx = entry->rw_cntr(entry, dd, CNTR_INVALID_VL, CNTR_MODE_R, 0); + + hfi1_cdbg( + CNTR, + "[%d] curr tx=0x%llx rx=0x%llx :: last tx=0x%llx rx=0x%llx\n", + dd->unit, cur_tx, cur_rx, dd->last_tx, dd->last_rx); + + if ((cur_tx < dd->last_tx) || (cur_rx < dd->last_rx)) { + /* + * May not be strictly necessary to update but it won't hurt and + * simplifies the logic here. + */ + update = 1; + hfi1_cdbg(CNTR, "[%d] Tripwire counter rolled, updating", + dd->unit); + } else { + total_flits = (cur_tx - dd->last_tx) + (cur_rx - dd->last_rx); + hfi1_cdbg(CNTR, + "[%d] total flits 0x%llx limit 0x%llx\n", dd->unit, + total_flits, (u64)CNTR_32BIT_MAX); + if (total_flits >= CNTR_32BIT_MAX) { + hfi1_cdbg(CNTR, "[%d] 32bit limit hit, updating", + dd->unit); + update = 1; + } + } + + if (update) { + hfi1_cdbg(CNTR, "[%d] Updating dd and ppd counters", dd->unit); + for (i = 0; i < DEV_CNTR_LAST; i++) { + entry = &dev_cntrs[i]; + if (entry->flags & CNTR_VL) { + for (vl = 0; vl < C_VL_COUNT; vl++) + read_dev_cntr(dd, i, vl); + } else { + read_dev_cntr(dd, i, CNTR_INVALID_VL); + } + } + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + for (j = 0; j < PORT_CNTR_LAST; j++) { + entry = &port_cntrs[j]; + if (entry->flags & CNTR_VL) { + for (vl = 0; vl < C_VL_COUNT; vl++) + read_port_cntr(ppd, j, vl); + } else { + read_port_cntr(ppd, j, CNTR_INVALID_VL); + } + } + } + + /* + * We want the value in the register. The goal is to keep track + * of the number of "ticks" not the counter value. In other + * words if the register rolls we want to notice it and go ahead + * and force an update. + */ + entry = &dev_cntrs[C_DC_XMIT_FLITS]; + dd->last_tx = entry->rw_cntr(entry, dd, CNTR_INVALID_VL, + CNTR_MODE_R, 0); + + entry = &dev_cntrs[C_DC_RCV_FLITS]; + dd->last_rx = entry->rw_cntr(entry, dd, CNTR_INVALID_VL, + CNTR_MODE_R, 0); + + hfi1_cdbg(CNTR, "[%d] setting last tx/rx to 0x%llx 0x%llx", + dd->unit, dd->last_tx, dd->last_rx); + + } else { + hfi1_cdbg(CNTR, "[%d] No update necessary", dd->unit); + } + +mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME); +} + +#define C_MAX_NAME 13 /* 12 chars + one for /0 */ +static int init_cntrs(struct hfi1_devdata *dd) +{ + int i, rcv_ctxts, index, j; + size_t sz; + char *p; + char name[C_MAX_NAME]; + struct hfi1_pportdata *ppd; + + /* set up the stats timer; the add_timer is done at the end */ + init_timer(&dd->synth_stats_timer); + dd->synth_stats_timer.function = update_synth_timer; + dd->synth_stats_timer.data = (unsigned long) dd; + + /***********************/ + /* per device counters */ + /***********************/ + + /* size names and determine how many we have*/ + dd->ndevcntrs = 0; + sz = 0; + index = 0; + + for (i = 0; i < DEV_CNTR_LAST; i++) { + hfi1_dbg_early("Init cntr %s\n", dev_cntrs[i].name); + if (dev_cntrs[i].flags & CNTR_DISABLED) { + hfi1_dbg_early("\tSkipping %s\n", dev_cntrs[i].name); + continue; + } + + if (dev_cntrs[i].flags & CNTR_VL) { + hfi1_dbg_early("\tProcessing VL cntr\n"); + dev_cntrs[i].offset = index; + for (j = 0; j < C_VL_COUNT; j++) { + memset(name, '\0', C_MAX_NAME); + snprintf(name, C_MAX_NAME, "%s%d", + dev_cntrs[i].name, + vl_from_idx(j)); + sz += strlen(name); + sz++; + hfi1_dbg_early("\t\t%s\n", name); + dd->ndevcntrs++; + index++; + } + } else { + /* +1 for newline */ + sz += strlen(dev_cntrs[i].name) + 1; + dd->ndevcntrs++; + dev_cntrs[i].offset = index; + index++; + hfi1_dbg_early("\tAdding %s\n", dev_cntrs[i].name); + } + } + + /* allocate space for the counter values */ + dd->cntrs = kcalloc(index, sizeof(u64), GFP_KERNEL); + if (!dd->cntrs) + goto bail; + + dd->scntrs = kcalloc(index, sizeof(u64), GFP_KERNEL); + if (!dd->scntrs) + goto bail; + + + /* allocate space for the counter names */ + dd->cntrnameslen = sz; + dd->cntrnames = kmalloc(sz, GFP_KERNEL); + if (!dd->cntrnames) + goto bail; + + /* fill in the names */ + for (p = dd->cntrnames, i = 0, index = 0; i < DEV_CNTR_LAST; i++) { + if (dev_cntrs[i].flags & CNTR_DISABLED) { + /* Nothing */ + } else { + if (dev_cntrs[i].flags & CNTR_VL) { + for (j = 0; j < C_VL_COUNT; j++) { + memset(name, '\0', C_MAX_NAME); + snprintf(name, C_MAX_NAME, "%s%d", + dev_cntrs[i].name, + vl_from_idx(j)); + memcpy(p, name, strlen(name)); + p += strlen(name); + *p++ = '\n'; + } + } else { + memcpy(p, dev_cntrs[i].name, + strlen(dev_cntrs[i].name)); + p += strlen(dev_cntrs[i].name); + *p++ = '\n'; + } + index++; + } + } + + /*********************/ + /* per port counters */ + /*********************/ + + /* + * Go through the counters for the overflows and disable the ones we + * don't need. This varies based on platform so we need to do it + * dynamically here. + */ + rcv_ctxts = dd->num_rcv_contexts; + for (i = C_RCV_HDR_OVF_FIRST + rcv_ctxts; + i <= C_RCV_HDR_OVF_LAST; i++) { + port_cntrs[i].flags |= CNTR_DISABLED; + } + + /* size port counter names and determine how many we have*/ + sz = 0; + dd->nportcntrs = 0; + for (i = 0; i < PORT_CNTR_LAST; i++) { + hfi1_dbg_early("Init pcntr %s\n", port_cntrs[i].name); + if (port_cntrs[i].flags & CNTR_DISABLED) { + hfi1_dbg_early("\tSkipping %s\n", port_cntrs[i].name); + continue; + } + + if (port_cntrs[i].flags & CNTR_VL) { + hfi1_dbg_early("\tProcessing VL cntr\n"); + port_cntrs[i].offset = dd->nportcntrs; + for (j = 0; j < C_VL_COUNT; j++) { + memset(name, '\0', C_MAX_NAME); + snprintf(name, C_MAX_NAME, "%s%d", + port_cntrs[i].name, + vl_from_idx(j)); + sz += strlen(name); + sz++; + hfi1_dbg_early("\t\t%s\n", name); + dd->nportcntrs++; + } + } else { + /* +1 for newline */ + sz += strlen(port_cntrs[i].name) + 1; + port_cntrs[i].offset = dd->nportcntrs; + dd->nportcntrs++; + hfi1_dbg_early("\tAdding %s\n", port_cntrs[i].name); + } + } + + /* allocate space for the counter names */ + dd->portcntrnameslen = sz; + dd->portcntrnames = kmalloc(sz, GFP_KERNEL); + if (!dd->portcntrnames) + goto bail; + + /* fill in port cntr names */ + for (p = dd->portcntrnames, i = 0; i < PORT_CNTR_LAST; i++) { + if (port_cntrs[i].flags & CNTR_DISABLED) + continue; + + if (port_cntrs[i].flags & CNTR_VL) { + for (j = 0; j < C_VL_COUNT; j++) { + memset(name, '\0', C_MAX_NAME); + snprintf(name, C_MAX_NAME, "%s%d", + port_cntrs[i].name, + vl_from_idx(j)); + memcpy(p, name, strlen(name)); + p += strlen(name); + *p++ = '\n'; + } + } else { + memcpy(p, port_cntrs[i].name, + strlen(port_cntrs[i].name)); + p += strlen(port_cntrs[i].name); + *p++ = '\n'; + } + } + + /* allocate per port storage for counter values */ + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + ppd->cntrs = kcalloc(dd->nportcntrs, sizeof(u64), GFP_KERNEL); + if (!ppd->cntrs) + goto bail; + + ppd->scntrs = kcalloc(dd->nportcntrs, sizeof(u64), GFP_KERNEL); + if (!ppd->scntrs) + goto bail; + } + + /* CPU counters need to be allocated and zeroed */ + if (init_cpu_counters(dd)) + goto bail; + + mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME); + return 0; +bail: + free_cntrs(dd); + return -ENOMEM; +} + + +static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate) +{ + switch (chip_lstate) { + default: + dd_dev_err(dd, + "Unknown logical state 0x%x, reporting IB_PORT_DOWN\n", + chip_lstate); + /* fall through */ + case LSTATE_DOWN: + return IB_PORT_DOWN; + case LSTATE_INIT: + return IB_PORT_INIT; + case LSTATE_ARMED: + return IB_PORT_ARMED; + case LSTATE_ACTIVE: + return IB_PORT_ACTIVE; + } +} + +u32 chip_to_opa_pstate(struct hfi1_devdata *dd, u32 chip_pstate) +{ + /* look at the HFI meta-states only */ + switch (chip_pstate & 0xf0) { + default: + dd_dev_err(dd, "Unexpected chip physical state of 0x%x\n", + chip_pstate); + /* fall through */ + case PLS_DISABLED: + return IB_PORTPHYSSTATE_DISABLED; + case PLS_OFFLINE: + return OPA_PORTPHYSSTATE_OFFLINE; + case PLS_POLLING: + return IB_PORTPHYSSTATE_POLLING; + case PLS_CONFIGPHY: + return IB_PORTPHYSSTATE_TRAINING; + case PLS_LINKUP: + return IB_PORTPHYSSTATE_LINKUP; + case PLS_PHYTEST: + return IB_PORTPHYSSTATE_PHY_TEST; + } +} + +/* return the OPA port logical state name */ +const char *opa_lstate_name(u32 lstate) +{ + static const char * const port_logical_names[] = { + "PORT_NOP", + "PORT_DOWN", + "PORT_INIT", + "PORT_ARMED", + "PORT_ACTIVE", + "PORT_ACTIVE_DEFER", + }; + if (lstate < ARRAY_SIZE(port_logical_names)) + return port_logical_names[lstate]; + return "unknown"; +} + +/* return the OPA port physical state name */ +const char *opa_pstate_name(u32 pstate) +{ + static const char * const port_physical_names[] = { + "PHYS_NOP", + "reserved1", + "PHYS_POLL", + "PHYS_DISABLED", + "PHYS_TRAINING", + "PHYS_LINKUP", + "PHYS_LINK_ERR_RECOVER", + "PHYS_PHY_TEST", + "reserved8", + "PHYS_OFFLINE", + "PHYS_GANGED", + "PHYS_TEST", + }; + if (pstate < ARRAY_SIZE(port_physical_names)) + return port_physical_names[pstate]; + return "unknown"; +} + +/* + * Read the hardware link state and set the driver's cached value of it. + * Return the (new) current value. + */ +u32 get_logical_state(struct hfi1_pportdata *ppd) +{ + u32 new_state; + + new_state = chip_to_opa_lstate(ppd->dd, read_logical_state(ppd->dd)); + if (new_state != ppd->lstate) { + dd_dev_info(ppd->dd, "logical state changed to %s (0x%x)\n", + opa_lstate_name(new_state), new_state); + ppd->lstate = new_state; + } + /* + * Set port status flags in the page mapped into userspace + * memory. Do it here to ensure a reliable state - this is + * the only function called by all state handling code. + * Always set the flags due to the fact that the cache value + * might have been changed explicitly outside of this + * function. + */ + if (ppd->statusp) { + switch (ppd->lstate) { + case IB_PORT_DOWN: + case IB_PORT_INIT: + *ppd->statusp &= ~(HFI1_STATUS_IB_CONF | + HFI1_STATUS_IB_READY); + break; + case IB_PORT_ARMED: + *ppd->statusp |= HFI1_STATUS_IB_CONF; + break; + case IB_PORT_ACTIVE: + *ppd->statusp |= HFI1_STATUS_IB_READY; + break; + } + } + return ppd->lstate; +} + +/** + * wait_logical_linkstate - wait for an IB link state change to occur + * @ppd: port device + * @state: the state to wait for + * @msecs: the number of milliseconds to wait + * + * Wait up to msecs milliseconds for IB link state change to occur. + * For now, take the easy polling route. + * Returns 0 if state reached, otherwise -ETIMEDOUT. + */ +static int wait_logical_linkstate(struct hfi1_pportdata *ppd, u32 state, + int msecs) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(msecs); + while (1) { + if (get_logical_state(ppd) == state) + return 0; + if (time_after(jiffies, timeout)) + break; + msleep(20); + } + dd_dev_err(ppd->dd, "timeout waiting for link state 0x%x\n", state); + + return -ETIMEDOUT; +} + +u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd) +{ + static u32 remembered_state = 0xff; + u32 pstate; + u32 ib_pstate; + + pstate = read_physical_state(ppd->dd); + ib_pstate = chip_to_opa_pstate(ppd->dd, pstate); + if (remembered_state != ib_pstate) { + dd_dev_info(ppd->dd, + "%s: physical state changed to %s (0x%x), phy 0x%x\n", + __func__, opa_pstate_name(ib_pstate), ib_pstate, + pstate); + remembered_state = ib_pstate; + } + return ib_pstate; +} + +/* + * Read/modify/write ASIC_QSFP register bits as selected by mask + * data: 0 or 1 in the positions depending on what needs to be written + * dir: 0 for read, 1 for write + * mask: select by setting + * I2CCLK (bit 0) + * I2CDATA (bit 1) + */ +u64 hfi1_gpio_mod(struct hfi1_devdata *dd, u32 target, u32 data, u32 dir, + u32 mask) +{ + u64 qsfp_oe, target_oe; + + target_oe = target ? ASIC_QSFP2_OE : ASIC_QSFP1_OE; + if (mask) { + /* We are writing register bits, so lock access */ + dir &= mask; + data &= mask; + + qsfp_oe = read_csr(dd, target_oe); + qsfp_oe = (qsfp_oe & ~(u64)mask) | (u64)dir; + write_csr(dd, target_oe, qsfp_oe); + } + /* We are exclusively reading bits here, but it is unlikely + * we'll get valid data when we set the direction of the pin + * in the same call, so read should call this function again + * to get valid data + */ + return read_csr(dd, target ? ASIC_QSFP2_IN : ASIC_QSFP1_IN); +} + +#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \ +(r &= ~SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) + +#define SET_STATIC_RATE_CONTROL_SMASK(r) \ +(r |= SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) + +int hfi1_init_ctxt(struct send_context *sc) +{ + if (sc != NULL) { + struct hfi1_devdata *dd = sc->dd; + u64 reg; + u8 set = (sc->type == SC_USER ? + HFI1_CAP_IS_USET(STATIC_RATE_CTRL) : + HFI1_CAP_IS_KSET(STATIC_RATE_CTRL)); + reg = read_kctxt_csr(dd, sc->hw_context, + SEND_CTXT_CHECK_ENABLE); + if (set) + CLEAR_STATIC_RATE_CONTROL_SMASK(reg); + else + SET_STATIC_RATE_CONTROL_SMASK(reg); + write_kctxt_csr(dd, sc->hw_context, + SEND_CTXT_CHECK_ENABLE, reg); + } + return 0; +} + +int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp) +{ + int ret = 0; + u64 reg; + + if (dd->icode != ICODE_RTL_SILICON) { + if (HFI1_CAP_IS_KSET(PRINT_UNIMPL)) + dd_dev_info(dd, "%s: tempsense not supported by HW\n", + __func__); + return -EINVAL; + } + reg = read_csr(dd, ASIC_STS_THERM); + temp->curr = ((reg >> ASIC_STS_THERM_CURR_TEMP_SHIFT) & + ASIC_STS_THERM_CURR_TEMP_MASK); + temp->lo_lim = ((reg >> ASIC_STS_THERM_LO_TEMP_SHIFT) & + ASIC_STS_THERM_LO_TEMP_MASK); + temp->hi_lim = ((reg >> ASIC_STS_THERM_HI_TEMP_SHIFT) & + ASIC_STS_THERM_HI_TEMP_MASK); + temp->crit_lim = ((reg >> ASIC_STS_THERM_CRIT_TEMP_SHIFT) & + ASIC_STS_THERM_CRIT_TEMP_MASK); + /* triggers is a 3-bit value - 1 bit per trigger. */ + temp->triggers = (u8)((reg >> ASIC_STS_THERM_LOW_SHIFT) & 0x7); + + return ret; +} + +/* ========================================================================= */ + +/* + * Enable/disable chip from delivering interrupts. + */ +void set_intr_state(struct hfi1_devdata *dd, u32 enable) +{ + int i; + + /* + * In HFI, the mask needs to be 1 to allow interrupts. + */ + if (enable) { + u64 cce_int_mask; + const int qsfp1_int_smask = QSFP1_INT % 64; + const int qsfp2_int_smask = QSFP2_INT % 64; + + /* enable all interrupts */ + for (i = 0; i < CCE_NUM_INT_CSRS; i++) + write_csr(dd, CCE_INT_MASK + (8*i), ~(u64)0); + + /* + * disable QSFP1 interrupts for HFI1, QSFP2 interrupts for HFI0 + * Qsfp1Int and Qsfp2Int are adjacent bits in the same CSR, + * therefore just one of QSFP1_INT/QSFP2_INT can be used to find + * the index of the appropriate CSR in the CCEIntMask CSR array + */ + cce_int_mask = read_csr(dd, CCE_INT_MASK + + (8*(QSFP1_INT/64))); + if (dd->hfi1_id) { + cce_int_mask &= ~((u64)1 << qsfp1_int_smask); + write_csr(dd, CCE_INT_MASK + (8*(QSFP1_INT/64)), + cce_int_mask); + } else { + cce_int_mask &= ~((u64)1 << qsfp2_int_smask); + write_csr(dd, CCE_INT_MASK + (8*(QSFP2_INT/64)), + cce_int_mask); + } + } else { + for (i = 0; i < CCE_NUM_INT_CSRS; i++) + write_csr(dd, CCE_INT_MASK + (8*i), 0ull); + } +} + +/* + * Clear all interrupt sources on the chip. + */ +static void clear_all_interrupts(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < CCE_NUM_INT_CSRS; i++) + write_csr(dd, CCE_INT_CLEAR + (8*i), ~(u64)0); + + write_csr(dd, CCE_ERR_CLEAR, ~(u64)0); + write_csr(dd, MISC_ERR_CLEAR, ~(u64)0); + write_csr(dd, RCV_ERR_CLEAR, ~(u64)0); + write_csr(dd, SEND_ERR_CLEAR, ~(u64)0); + write_csr(dd, SEND_PIO_ERR_CLEAR, ~(u64)0); + write_csr(dd, SEND_DMA_ERR_CLEAR, ~(u64)0); + write_csr(dd, SEND_EGRESS_ERR_CLEAR, ~(u64)0); + for (i = 0; i < dd->chip_send_contexts; i++) + write_kctxt_csr(dd, i, SEND_CTXT_ERR_CLEAR, ~(u64)0); + for (i = 0; i < dd->chip_sdma_engines; i++) + write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_CLEAR, ~(u64)0); + + write_csr(dd, DCC_ERR_FLG_CLR, ~(u64)0); + write_csr(dd, DC_LCB_ERR_CLR, ~(u64)0); + write_csr(dd, DC_DC8051_ERR_CLR, ~(u64)0); +} + +/* Move to pcie.c? */ +static void disable_intx(struct pci_dev *pdev) +{ + pci_intx(pdev, 0); +} + +static void clean_up_interrupts(struct hfi1_devdata *dd) +{ + int i; + + /* remove irqs - must happen before disabling/turning off */ + if (dd->num_msix_entries) { + /* MSI-X */ + struct hfi1_msix_entry *me = dd->msix_entries; + + for (i = 0; i < dd->num_msix_entries; i++, me++) { + if (me->arg == NULL) /* => no irq, no affinity */ + break; + irq_set_affinity_hint(dd->msix_entries[i].msix.vector, + NULL); + free_irq(me->msix.vector, me->arg); + } + } else { + /* INTx */ + if (dd->requested_intx_irq) { + free_irq(dd->pcidev->irq, dd); + dd->requested_intx_irq = 0; + } + } + + /* turn off interrupts */ + if (dd->num_msix_entries) { + /* MSI-X */ + hfi1_nomsix(dd); + } else { + /* INTx */ + disable_intx(dd->pcidev); + } + + /* clean structures */ + for (i = 0; i < dd->num_msix_entries; i++) + free_cpumask_var(dd->msix_entries[i].mask); + kfree(dd->msix_entries); + dd->msix_entries = NULL; + dd->num_msix_entries = 0; +} + +/* + * Remap the interrupt source from the general handler to the given MSI-X + * interrupt. + */ +static void remap_intr(struct hfi1_devdata *dd, int isrc, int msix_intr) +{ + u64 reg; + int m, n; + + /* clear from the handled mask of the general interrupt */ + m = isrc / 64; + n = isrc % 64; + dd->gi_mask[m] &= ~((u64)1 << n); + + /* direct the chip source to the given MSI-X interrupt */ + m = isrc / 8; + n = isrc % 8; + reg = read_csr(dd, CCE_INT_MAP + (8*m)); + reg &= ~((u64)0xff << (8*n)); + reg |= ((u64)msix_intr & 0xff) << (8*n); + write_csr(dd, CCE_INT_MAP + (8*m), reg); +} + +static void remap_sdma_interrupts(struct hfi1_devdata *dd, + int engine, int msix_intr) +{ + /* + * SDMA engine interrupt sources grouped by type, rather than + * engine. Per-engine interrupts are as follows: + * SDMA + * SDMAProgress + * SDMAIdle + */ + remap_intr(dd, IS_SDMA_START + 0*TXE_NUM_SDMA_ENGINES + engine, + msix_intr); + remap_intr(dd, IS_SDMA_START + 1*TXE_NUM_SDMA_ENGINES + engine, + msix_intr); + remap_intr(dd, IS_SDMA_START + 2*TXE_NUM_SDMA_ENGINES + engine, + msix_intr); +} + +static void remap_receive_available_interrupt(struct hfi1_devdata *dd, + int rx, int msix_intr) +{ + remap_intr(dd, IS_RCVAVAIL_START + rx, msix_intr); +} + +static int request_intx_irq(struct hfi1_devdata *dd) +{ + int ret; + + snprintf(dd->intx_name, sizeof(dd->intx_name), DRIVER_NAME"_%d", + dd->unit); + ret = request_irq(dd->pcidev->irq, general_interrupt, + IRQF_SHARED, dd->intx_name, dd); + if (ret) + dd_dev_err(dd, "unable to request INTx interrupt, err %d\n", + ret); + else + dd->requested_intx_irq = 1; + return ret; +} + +static int request_msix_irqs(struct hfi1_devdata *dd) +{ + const struct cpumask *local_mask; + cpumask_var_t def, rcv; + bool def_ret, rcv_ret; + int first_general, last_general; + int first_sdma, last_sdma; + int first_rx, last_rx; + int first_cpu, restart_cpu, curr_cpu; + int rcv_cpu, sdma_cpu; + int i, ret = 0, possible; + int ht; + + /* calculate the ranges we are going to use */ + first_general = 0; + first_sdma = last_general = first_general + 1; + first_rx = last_sdma = first_sdma + dd->num_sdma; + last_rx = first_rx + dd->n_krcv_queues; + + /* + * Interrupt affinity. + * + * non-rcv avail gets a default mask that + * starts as possible cpus with threads reset + * and each rcv avail reset. + * + * rcv avail gets node relative 1 wrapping back + * to the node relative 1 as necessary. + * + */ + local_mask = cpumask_of_pcibus(dd->pcidev->bus); + /* if first cpu is invalid, use NUMA 0 */ + if (cpumask_first(local_mask) >= nr_cpu_ids) + local_mask = topology_core_cpumask(0); + + def_ret = zalloc_cpumask_var(&def, GFP_KERNEL); + rcv_ret = zalloc_cpumask_var(&rcv, GFP_KERNEL); + if (!def_ret || !rcv_ret) + goto bail; + /* use local mask as default */ + cpumask_copy(def, local_mask); + possible = cpumask_weight(def); + /* disarm threads from default */ + ht = cpumask_weight( + topology_sibling_cpumask(cpumask_first(local_mask))); + for (i = possible/ht; i < possible; i++) + cpumask_clear_cpu(i, def); + /* reset possible */ + possible = cpumask_weight(def); + /* def now has full cores on chosen node*/ + first_cpu = cpumask_first(def); + if (nr_cpu_ids >= first_cpu) + first_cpu++; + restart_cpu = first_cpu; + curr_cpu = restart_cpu; + + for (i = first_cpu; i < dd->n_krcv_queues + first_cpu; i++) { + cpumask_clear_cpu(curr_cpu, def); + cpumask_set_cpu(curr_cpu, rcv); + if (curr_cpu >= possible) + curr_cpu = restart_cpu; + else + curr_cpu++; + } + /* def mask has non-rcv, rcv has recv mask */ + rcv_cpu = cpumask_first(rcv); + sdma_cpu = cpumask_first(def); + + /* + * Sanity check - the code expects all SDMA chip source + * interrupts to be in the same CSR, starting at bit 0. Verify + * that this is true by checking the bit location of the start. + */ + BUILD_BUG_ON(IS_SDMA_START % 64); + + for (i = 0; i < dd->num_msix_entries; i++) { + struct hfi1_msix_entry *me = &dd->msix_entries[i]; + const char *err_info; + irq_handler_t handler; + void *arg; + int idx; + struct hfi1_ctxtdata *rcd = NULL; + struct sdma_engine *sde = NULL; + + /* obtain the arguments to request_irq */ + if (first_general <= i && i < last_general) { + idx = i - first_general; + handler = general_interrupt; + arg = dd; + snprintf(me->name, sizeof(me->name), + DRIVER_NAME"_%d", dd->unit); + err_info = "general"; + } else if (first_sdma <= i && i < last_sdma) { + idx = i - first_sdma; + sde = &dd->per_sdma[idx]; + handler = sdma_interrupt; + arg = sde; + snprintf(me->name, sizeof(me->name), + DRIVER_NAME"_%d sdma%d", dd->unit, idx); + err_info = "sdma"; + remap_sdma_interrupts(dd, idx, i); + } else if (first_rx <= i && i < last_rx) { + idx = i - first_rx; + rcd = dd->rcd[idx]; + /* no interrupt if no rcd */ + if (!rcd) + continue; + /* + * Set the interrupt register and mask for this + * context's interrupt. + */ + rcd->ireg = (IS_RCVAVAIL_START+idx) / 64; + rcd->imask = ((u64)1) << + ((IS_RCVAVAIL_START+idx) % 64); + handler = receive_context_interrupt; + arg = rcd; + snprintf(me->name, sizeof(me->name), + DRIVER_NAME"_%d kctxt%d", dd->unit, idx); + err_info = "receive context"; + remap_receive_available_interrupt(dd, idx, i); + } else { + /* not in our expected range - complain, then + ignore it */ + dd_dev_err(dd, + "Unexpected extra MSI-X interrupt %d\n", i); + continue; + } + /* no argument, no interrupt */ + if (arg == NULL) + continue; + /* make sure the name is terminated */ + me->name[sizeof(me->name)-1] = 0; + + ret = request_irq(me->msix.vector, handler, 0, me->name, arg); + if (ret) { + dd_dev_err(dd, + "unable to allocate %s interrupt, vector %d, index %d, err %d\n", + err_info, me->msix.vector, idx, ret); + return ret; + } + /* + * assign arg after request_irq call, so it will be + * cleaned up + */ + me->arg = arg; + + if (!zalloc_cpumask_var( + &dd->msix_entries[i].mask, + GFP_KERNEL)) + goto bail; + if (handler == sdma_interrupt) { + dd_dev_info(dd, "sdma engine %d cpu %d\n", + sde->this_idx, sdma_cpu); + cpumask_set_cpu(sdma_cpu, dd->msix_entries[i].mask); + sdma_cpu = cpumask_next(sdma_cpu, def); + if (sdma_cpu >= nr_cpu_ids) + sdma_cpu = cpumask_first(def); + } else if (handler == receive_context_interrupt) { + dd_dev_info(dd, "rcv ctxt %d cpu %d\n", + rcd->ctxt, rcv_cpu); + cpumask_set_cpu(rcv_cpu, dd->msix_entries[i].mask); + rcv_cpu = cpumask_next(rcv_cpu, rcv); + if (rcv_cpu >= nr_cpu_ids) + rcv_cpu = cpumask_first(rcv); + } else { + /* otherwise first def */ + dd_dev_info(dd, "%s cpu %d\n", + err_info, cpumask_first(def)); + cpumask_set_cpu( + cpumask_first(def), dd->msix_entries[i].mask); + } + irq_set_affinity_hint( + dd->msix_entries[i].msix.vector, + dd->msix_entries[i].mask); + } + +out: + free_cpumask_var(def); + free_cpumask_var(rcv); + return ret; +bail: + ret = -ENOMEM; + goto out; +} + +/* + * Set the general handler to accept all interrupts, remap all + * chip interrupts back to MSI-X 0. + */ +static void reset_interrupts(struct hfi1_devdata *dd) +{ + int i; + + /* all interrupts handled by the general handler */ + for (i = 0; i < CCE_NUM_INT_CSRS; i++) + dd->gi_mask[i] = ~(u64)0; + + /* all chip interrupts map to MSI-X 0 */ + for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++) + write_csr(dd, CCE_INT_MAP + (8*i), 0); +} + +static int set_up_interrupts(struct hfi1_devdata *dd) +{ + struct hfi1_msix_entry *entries; + u32 total, request; + int i, ret; + int single_interrupt = 0; /* we expect to have all the interrupts */ + + /* + * Interrupt count: + * 1 general, "slow path" interrupt (includes the SDMA engines + * slow source, SDMACleanupDone) + * N interrupts - one per used SDMA engine + * M interrupt - one per kernel receive context + */ + total = 1 + dd->num_sdma + dd->n_krcv_queues; + + entries = kcalloc(total, sizeof(*entries), GFP_KERNEL); + if (!entries) { + dd_dev_err(dd, "cannot allocate msix table\n"); + ret = -ENOMEM; + goto fail; + } + /* 1-1 MSI-X entry assignment */ + for (i = 0; i < total; i++) + entries[i].msix.entry = i; + + /* ask for MSI-X interrupts */ + request = total; + request_msix(dd, &request, entries); + + if (request == 0) { + /* using INTx */ + /* dd->num_msix_entries already zero */ + kfree(entries); + single_interrupt = 1; + dd_dev_err(dd, "MSI-X failed, using INTx interrupts\n"); + } else { + /* using MSI-X */ + dd->num_msix_entries = request; + dd->msix_entries = entries; + + if (request != total) { + /* using MSI-X, with reduced interrupts */ + dd_dev_err( + dd, + "cannot handle reduced interrupt case, want %u, got %u\n", + total, request); + ret = -EINVAL; + goto fail; + } + dd_dev_info(dd, "%u MSI-X interrupts allocated\n", total); + } + + /* mask all interrupts */ + set_intr_state(dd, 0); + /* clear all pending interrupts */ + clear_all_interrupts(dd); + + /* reset general handler mask, chip MSI-X mappings */ + reset_interrupts(dd); + + if (single_interrupt) + ret = request_intx_irq(dd); + else + ret = request_msix_irqs(dd); + if (ret) + goto fail; + + return 0; + +fail: + clean_up_interrupts(dd); + return ret; +} + +/* + * Set up context values in dd. Sets: + * + * num_rcv_contexts - number of contexts being used + * n_krcv_queues - number of kernel contexts + * first_user_ctxt - first non-kernel context in array of contexts + * freectxts - number of free user contexts + * num_send_contexts - number of PIO send contexts being used + */ +static int set_up_context_variables(struct hfi1_devdata *dd) +{ + int num_kernel_contexts; + int num_user_contexts; + int total_contexts; + int ret; + unsigned ngroups; + + /* + * Kernel contexts: (to be fixed later): + * - min or 2 or 1 context/numa + * - Context 0 - default/errors + * - Context 1 - VL15 + */ + if (n_krcvqs) + num_kernel_contexts = n_krcvqs + MIN_KERNEL_KCTXTS; + else + num_kernel_contexts = num_online_nodes(); + num_kernel_contexts = + max_t(int, MIN_KERNEL_KCTXTS, num_kernel_contexts); + /* + * Every kernel receive context needs an ACK send context. + * one send context is allocated for each VL{0-7} and VL15 + */ + if (num_kernel_contexts > (dd->chip_send_contexts - num_vls - 1)) { + dd_dev_err(dd, + "Reducing # kernel rcv contexts to: %d, from %d\n", + (int)(dd->chip_send_contexts - num_vls - 1), + (int)num_kernel_contexts); + num_kernel_contexts = dd->chip_send_contexts - num_vls - 1; + } + /* + * User contexts: (to be fixed later) + * - set to num_rcv_contexts if non-zero + * - default to 1 user context per CPU + */ + if (num_rcv_contexts) + num_user_contexts = num_rcv_contexts; + else + num_user_contexts = num_online_cpus(); + + total_contexts = num_kernel_contexts + num_user_contexts; + + /* + * Adjust the counts given a global max. + */ + if (total_contexts > dd->chip_rcv_contexts) { + dd_dev_err(dd, + "Reducing # user receive contexts to: %d, from %d\n", + (int)(dd->chip_rcv_contexts - num_kernel_contexts), + (int)num_user_contexts); + num_user_contexts = dd->chip_rcv_contexts - num_kernel_contexts; + /* recalculate */ + total_contexts = num_kernel_contexts + num_user_contexts; + } + + /* the first N are kernel contexts, the rest are user contexts */ + dd->num_rcv_contexts = total_contexts; + dd->n_krcv_queues = num_kernel_contexts; + dd->first_user_ctxt = num_kernel_contexts; + dd->freectxts = num_user_contexts; + dd_dev_info(dd, + "rcv contexts: chip %d, used %d (kernel %d, user %d)\n", + (int)dd->chip_rcv_contexts, + (int)dd->num_rcv_contexts, + (int)dd->n_krcv_queues, + (int)dd->num_rcv_contexts - dd->n_krcv_queues); + + /* + * Receive array allocation: + * All RcvArray entries are divided into groups of 8. This + * is required by the hardware and will speed up writes to + * consecutive entries by using write-combining of the entire + * cacheline. + * + * The number of groups are evenly divided among all contexts. + * any left over groups will be given to the first N user + * contexts. + */ + dd->rcv_entries.group_size = RCV_INCREMENT; + ngroups = dd->chip_rcv_array_count / dd->rcv_entries.group_size; + dd->rcv_entries.ngroups = ngroups / dd->num_rcv_contexts; + dd->rcv_entries.nctxt_extra = ngroups - + (dd->num_rcv_contexts * dd->rcv_entries.ngroups); + dd_dev_info(dd, "RcvArray groups %u, ctxts extra %u\n", + dd->rcv_entries.ngroups, + dd->rcv_entries.nctxt_extra); + if (dd->rcv_entries.ngroups * dd->rcv_entries.group_size > + MAX_EAGER_ENTRIES * 2) { + dd->rcv_entries.ngroups = (MAX_EAGER_ENTRIES * 2) / + dd->rcv_entries.group_size; + dd_dev_info(dd, + "RcvArray group count too high, change to %u\n", + dd->rcv_entries.ngroups); + dd->rcv_entries.nctxt_extra = 0; + } + /* + * PIO send contexts + */ + ret = init_sc_pools_and_sizes(dd); + if (ret >= 0) { /* success */ + dd->num_send_contexts = ret; + dd_dev_info( + dd, + "send contexts: chip %d, used %d (kernel %d, ack %d, user %d)\n", + dd->chip_send_contexts, + dd->num_send_contexts, + dd->sc_sizes[SC_KERNEL].count, + dd->sc_sizes[SC_ACK].count, + dd->sc_sizes[SC_USER].count); + ret = 0; /* success */ + } + + return ret; +} + +/* + * Set the device/port partition key table. The MAD code + * will ensure that, at least, the partial management + * partition key is present in the table. + */ +static void set_partition_keys(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 reg = 0; + int i; + + dd_dev_info(dd, "Setting partition keys\n"); + for (i = 0; i < hfi1_get_npkeys(dd); i++) { + reg |= (ppd->pkeys[i] & + RCV_PARTITION_KEY_PARTITION_KEY_A_MASK) << + ((i % 4) * + RCV_PARTITION_KEY_PARTITION_KEY_B_SHIFT); + /* Each register holds 4 PKey values. */ + if ((i % 4) == 3) { + write_csr(dd, RCV_PARTITION_KEY + + ((i - 3) * 2), reg); + reg = 0; + } + } + + /* Always enable HW pkeys check when pkeys table is set */ + add_rcvctrl(dd, RCV_CTRL_RCV_PARTITION_KEY_ENABLE_SMASK); +} + +/* + * These CSRs and memories are uninitialized on reset and must be + * written before reading to set the ECC/parity bits. + * + * NOTE: All user context CSRs that are not mmaped write-only + * (e.g. the TID flows) must be initialized even if the driver never + * reads them. + */ +static void write_uninitialized_csrs_and_memories(struct hfi1_devdata *dd) +{ + int i, j; + + /* CceIntMap */ + for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++) + write_csr(dd, CCE_INT_MAP+(8*i), 0); + + /* SendCtxtCreditReturnAddr */ + for (i = 0; i < dd->chip_send_contexts; i++) + write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_RETURN_ADDR, 0); + + /* PIO Send buffers */ + /* SDMA Send buffers */ + /* These are not normally read, and (presently) have no method + to be read, so are not pre-initialized */ + + /* RcvHdrAddr */ + /* RcvHdrTailAddr */ + /* RcvTidFlowTable */ + for (i = 0; i < dd->chip_rcv_contexts; i++) { + write_kctxt_csr(dd, i, RCV_HDR_ADDR, 0); + write_kctxt_csr(dd, i, RCV_HDR_TAIL_ADDR, 0); + for (j = 0; j < RXE_NUM_TID_FLOWS; j++) + write_uctxt_csr(dd, i, RCV_TID_FLOW_TABLE+(8*j), 0); + } + + /* RcvArray */ + for (i = 0; i < dd->chip_rcv_array_count; i++) + write_csr(dd, RCV_ARRAY + (8*i), + RCV_ARRAY_RT_WRITE_ENABLE_SMASK); + + /* RcvQPMapTable */ + for (i = 0; i < 32; i++) + write_csr(dd, RCV_QP_MAP_TABLE + (8 * i), 0); +} + +/* + * Use the ctrl_bits in CceCtrl to clear the status_bits in CceStatus. + */ +static void clear_cce_status(struct hfi1_devdata *dd, u64 status_bits, + u64 ctrl_bits) +{ + unsigned long timeout; + u64 reg; + + /* is the condition present? */ + reg = read_csr(dd, CCE_STATUS); + if ((reg & status_bits) == 0) + return; + + /* clear the condition */ + write_csr(dd, CCE_CTRL, ctrl_bits); + + /* wait for the condition to clear */ + timeout = jiffies + msecs_to_jiffies(CCE_STATUS_TIMEOUT); + while (1) { + reg = read_csr(dd, CCE_STATUS); + if ((reg & status_bits) == 0) + return; + if (time_after(jiffies, timeout)) { + dd_dev_err(dd, + "Timeout waiting for CceStatus to clear bits 0x%llx, remaining 0x%llx\n", + status_bits, reg & status_bits); + return; + } + udelay(1); + } +} + +/* set CCE CSRs to chip reset defaults */ +static void reset_cce_csrs(struct hfi1_devdata *dd) +{ + int i; + + /* CCE_REVISION read-only */ + /* CCE_REVISION2 read-only */ + /* CCE_CTRL - bits clear automatically */ + /* CCE_STATUS read-only, use CceCtrl to clear */ + clear_cce_status(dd, ALL_FROZE, CCE_CTRL_SPC_UNFREEZE_SMASK); + clear_cce_status(dd, ALL_TXE_PAUSE, CCE_CTRL_TXE_RESUME_SMASK); + clear_cce_status(dd, ALL_RXE_PAUSE, CCE_CTRL_RXE_RESUME_SMASK); + for (i = 0; i < CCE_NUM_SCRATCH; i++) + write_csr(dd, CCE_SCRATCH + (8 * i), 0); + /* CCE_ERR_STATUS read-only */ + write_csr(dd, CCE_ERR_MASK, 0); + write_csr(dd, CCE_ERR_CLEAR, ~0ull); + /* CCE_ERR_FORCE leave alone */ + for (i = 0; i < CCE_NUM_32_BIT_COUNTERS; i++) + write_csr(dd, CCE_COUNTER_ARRAY32 + (8 * i), 0); + write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_RESETCSR); + /* CCE_PCIE_CTRL leave alone */ + for (i = 0; i < CCE_NUM_MSIX_VECTORS; i++) { + write_csr(dd, CCE_MSIX_TABLE_LOWER + (8 * i), 0); + write_csr(dd, CCE_MSIX_TABLE_UPPER + (8 * i), + CCE_MSIX_TABLE_UPPER_RESETCSR); + } + for (i = 0; i < CCE_NUM_MSIX_PBAS; i++) { + /* CCE_MSIX_PBA read-only */ + write_csr(dd, CCE_MSIX_INT_GRANTED, ~0ull); + write_csr(dd, CCE_MSIX_VEC_CLR_WITHOUT_INT, ~0ull); + } + for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++) + write_csr(dd, CCE_INT_MAP, 0); + for (i = 0; i < CCE_NUM_INT_CSRS; i++) { + /* CCE_INT_STATUS read-only */ + write_csr(dd, CCE_INT_MASK + (8 * i), 0); + write_csr(dd, CCE_INT_CLEAR + (8 * i), ~0ull); + /* CCE_INT_FORCE leave alone */ + /* CCE_INT_BLOCKED read-only */ + } + for (i = 0; i < CCE_NUM_32_BIT_INT_COUNTERS; i++) + write_csr(dd, CCE_INT_COUNTER_ARRAY32 + (8 * i), 0); +} + +/* set ASIC CSRs to chip reset defaults */ +static void reset_asic_csrs(struct hfi1_devdata *dd) +{ + static DEFINE_MUTEX(asic_mutex); + static int called; + int i; + + /* + * If the HFIs are shared between separate nodes or VMs, + * then more will need to be done here. One idea is a module + * parameter that returns early, letting the first power-on or + * a known first load do the reset and blocking all others. + */ + + /* + * These CSRs should only be reset once - the first one here will + * do the work. Use a mutex so that a non-first caller waits until + * the first is finished before it can proceed. + */ + mutex_lock(&asic_mutex); + if (called) + goto done; + called = 1; + + if (dd->icode != ICODE_FPGA_EMULATION) { + /* emulation does not have an SBus - leave these alone */ + /* + * All writes to ASIC_CFG_SBUS_REQUEST do something. + * Notes: + * o The reset is not zero if aimed at the core. See the + * SBus documentation for details. + * o If the SBus firmware has been updated (e.g. by the BIOS), + * will the reset revert that? + */ + /* ASIC_CFG_SBUS_REQUEST leave alone */ + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0); + } + /* ASIC_SBUS_RESULT read-only */ + write_csr(dd, ASIC_STS_SBUS_COUNTERS, 0); + for (i = 0; i < ASIC_NUM_SCRATCH; i++) + write_csr(dd, ASIC_CFG_SCRATCH + (8 * i), 0); + write_csr(dd, ASIC_CFG_MUTEX, 0); /* this will clear it */ + write_csr(dd, ASIC_CFG_DRV_STR, 0); + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0); + /* ASIC_STS_THERM read-only */ + /* ASIC_CFG_RESET leave alone */ + + write_csr(dd, ASIC_PCIE_SD_HOST_CMD, 0); + /* ASIC_PCIE_SD_HOST_STATUS read-only */ + write_csr(dd, ASIC_PCIE_SD_INTRPT_DATA_CODE, 0); + write_csr(dd, ASIC_PCIE_SD_INTRPT_ENABLE, 0); + /* ASIC_PCIE_SD_INTRPT_PROGRESS read-only */ + write_csr(dd, ASIC_PCIE_SD_INTRPT_STATUS, ~0ull); /* clear */ + /* ASIC_HFI0_PCIE_SD_INTRPT_RSPD_DATA read-only */ + /* ASIC_HFI1_PCIE_SD_INTRPT_RSPD_DATA read-only */ + for (i = 0; i < 16; i++) + write_csr(dd, ASIC_PCIE_SD_INTRPT_LIST + (8 * i), 0); + + /* ASIC_GPIO_IN read-only */ + write_csr(dd, ASIC_GPIO_OE, 0); + write_csr(dd, ASIC_GPIO_INVERT, 0); + write_csr(dd, ASIC_GPIO_OUT, 0); + write_csr(dd, ASIC_GPIO_MASK, 0); + /* ASIC_GPIO_STATUS read-only */ + write_csr(dd, ASIC_GPIO_CLEAR, ~0ull); + /* ASIC_GPIO_FORCE leave alone */ + + /* ASIC_QSFP1_IN read-only */ + write_csr(dd, ASIC_QSFP1_OE, 0); + write_csr(dd, ASIC_QSFP1_INVERT, 0); + write_csr(dd, ASIC_QSFP1_OUT, 0); + write_csr(dd, ASIC_QSFP1_MASK, 0); + /* ASIC_QSFP1_STATUS read-only */ + write_csr(dd, ASIC_QSFP1_CLEAR, ~0ull); + /* ASIC_QSFP1_FORCE leave alone */ + + /* ASIC_QSFP2_IN read-only */ + write_csr(dd, ASIC_QSFP2_OE, 0); + write_csr(dd, ASIC_QSFP2_INVERT, 0); + write_csr(dd, ASIC_QSFP2_OUT, 0); + write_csr(dd, ASIC_QSFP2_MASK, 0); + /* ASIC_QSFP2_STATUS read-only */ + write_csr(dd, ASIC_QSFP2_CLEAR, ~0ull); + /* ASIC_QSFP2_FORCE leave alone */ + + write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_RESETCSR); + /* this also writes a NOP command, clearing paging mode */ + write_csr(dd, ASIC_EEP_ADDR_CMD, 0); + write_csr(dd, ASIC_EEP_DATA, 0); + +done: + mutex_unlock(&asic_mutex); +} + +/* set MISC CSRs to chip reset defaults */ +static void reset_misc_csrs(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < 32; i++) { + write_csr(dd, MISC_CFG_RSA_R2 + (8 * i), 0); + write_csr(dd, MISC_CFG_RSA_SIGNATURE + (8 * i), 0); + write_csr(dd, MISC_CFG_RSA_MODULUS + (8 * i), 0); + } + /* MISC_CFG_SHA_PRELOAD leave alone - always reads 0 and can + only be written 128-byte chunks */ + /* init RSA engine to clear lingering errors */ + write_csr(dd, MISC_CFG_RSA_CMD, 1); + write_csr(dd, MISC_CFG_RSA_MU, 0); + write_csr(dd, MISC_CFG_FW_CTRL, 0); + /* MISC_STS_8051_DIGEST read-only */ + /* MISC_STS_SBM_DIGEST read-only */ + /* MISC_STS_PCIE_DIGEST read-only */ + /* MISC_STS_FAB_DIGEST read-only */ + /* MISC_ERR_STATUS read-only */ + write_csr(dd, MISC_ERR_MASK, 0); + write_csr(dd, MISC_ERR_CLEAR, ~0ull); + /* MISC_ERR_FORCE leave alone */ +} + +/* set TXE CSRs to chip reset defaults */ +static void reset_txe_csrs(struct hfi1_devdata *dd) +{ + int i; + + /* + * TXE Kernel CSRs + */ + write_csr(dd, SEND_CTRL, 0); + __cm_reset(dd, 0); /* reset CM internal state */ + /* SEND_CONTEXTS read-only */ + /* SEND_DMA_ENGINES read-only */ + /* SEND_PIO_MEM_SIZE read-only */ + /* SEND_DMA_MEM_SIZE read-only */ + write_csr(dd, SEND_HIGH_PRIORITY_LIMIT, 0); + pio_reset_all(dd); /* SEND_PIO_INIT_CTXT */ + /* SEND_PIO_ERR_STATUS read-only */ + write_csr(dd, SEND_PIO_ERR_MASK, 0); + write_csr(dd, SEND_PIO_ERR_CLEAR, ~0ull); + /* SEND_PIO_ERR_FORCE leave alone */ + /* SEND_DMA_ERR_STATUS read-only */ + write_csr(dd, SEND_DMA_ERR_MASK, 0); + write_csr(dd, SEND_DMA_ERR_CLEAR, ~0ull); + /* SEND_DMA_ERR_FORCE leave alone */ + /* SEND_EGRESS_ERR_STATUS read-only */ + write_csr(dd, SEND_EGRESS_ERR_MASK, 0); + write_csr(dd, SEND_EGRESS_ERR_CLEAR, ~0ull); + /* SEND_EGRESS_ERR_FORCE leave alone */ + write_csr(dd, SEND_BTH_QP, 0); + write_csr(dd, SEND_STATIC_RATE_CONTROL, 0); + write_csr(dd, SEND_SC2VLT0, 0); + write_csr(dd, SEND_SC2VLT1, 0); + write_csr(dd, SEND_SC2VLT2, 0); + write_csr(dd, SEND_SC2VLT3, 0); + write_csr(dd, SEND_LEN_CHECK0, 0); + write_csr(dd, SEND_LEN_CHECK1, 0); + /* SEND_ERR_STATUS read-only */ + write_csr(dd, SEND_ERR_MASK, 0); + write_csr(dd, SEND_ERR_CLEAR, ~0ull); + /* SEND_ERR_FORCE read-only */ + for (i = 0; i < VL_ARB_LOW_PRIO_TABLE_SIZE; i++) + write_csr(dd, SEND_LOW_PRIORITY_LIST + (8*i), 0); + for (i = 0; i < VL_ARB_HIGH_PRIO_TABLE_SIZE; i++) + write_csr(dd, SEND_HIGH_PRIORITY_LIST + (8*i), 0); + for (i = 0; i < dd->chip_send_contexts/NUM_CONTEXTS_PER_SET; i++) + write_csr(dd, SEND_CONTEXT_SET_CTRL + (8*i), 0); + for (i = 0; i < TXE_NUM_32_BIT_COUNTER; i++) + write_csr(dd, SEND_COUNTER_ARRAY32 + (8*i), 0); + for (i = 0; i < TXE_NUM_64_BIT_COUNTER; i++) + write_csr(dd, SEND_COUNTER_ARRAY64 + (8*i), 0); + write_csr(dd, SEND_CM_CTRL, SEND_CM_CTRL_RESETCSR); + write_csr(dd, SEND_CM_GLOBAL_CREDIT, + SEND_CM_GLOBAL_CREDIT_RESETCSR); + /* SEND_CM_CREDIT_USED_STATUS read-only */ + write_csr(dd, SEND_CM_TIMER_CTRL, 0); + write_csr(dd, SEND_CM_LOCAL_AU_TABLE0_TO3, 0); + write_csr(dd, SEND_CM_LOCAL_AU_TABLE4_TO7, 0); + write_csr(dd, SEND_CM_REMOTE_AU_TABLE0_TO3, 0); + write_csr(dd, SEND_CM_REMOTE_AU_TABLE4_TO7, 0); + for (i = 0; i < TXE_NUM_DATA_VL; i++) + write_csr(dd, SEND_CM_CREDIT_VL + (8*i), 0); + write_csr(dd, SEND_CM_CREDIT_VL15, 0); + /* SEND_CM_CREDIT_USED_VL read-only */ + /* SEND_CM_CREDIT_USED_VL15 read-only */ + /* SEND_EGRESS_CTXT_STATUS read-only */ + /* SEND_EGRESS_SEND_DMA_STATUS read-only */ + write_csr(dd, SEND_EGRESS_ERR_INFO, ~0ull); + /* SEND_EGRESS_ERR_INFO read-only */ + /* SEND_EGRESS_ERR_SOURCE read-only */ + + /* + * TXE Per-Context CSRs + */ + for (i = 0; i < dd->chip_send_contexts; i++) { + write_kctxt_csr(dd, i, SEND_CTXT_CTRL, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_CTRL, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_RETURN_ADDR, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_FORCE, 0); + write_kctxt_csr(dd, i, SEND_CTXT_ERR_MASK, 0); + write_kctxt_csr(dd, i, SEND_CTXT_ERR_CLEAR, ~0ull); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_ENABLE, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_VL, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_JOB_KEY, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_PARTITION_KEY, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_SLID, 0); + write_kctxt_csr(dd, i, SEND_CTXT_CHECK_OPCODE, 0); + } + + /* + * TXE Per-SDMA CSRs + */ + for (i = 0; i < dd->chip_sdma_engines; i++) { + write_kctxt_csr(dd, i, SEND_DMA_CTRL, 0); + /* SEND_DMA_STATUS read-only */ + write_kctxt_csr(dd, i, SEND_DMA_BASE_ADDR, 0); + write_kctxt_csr(dd, i, SEND_DMA_LEN_GEN, 0); + write_kctxt_csr(dd, i, SEND_DMA_TAIL, 0); + /* SEND_DMA_HEAD read-only */ + write_kctxt_csr(dd, i, SEND_DMA_HEAD_ADDR, 0); + write_kctxt_csr(dd, i, SEND_DMA_PRIORITY_THLD, 0); + /* SEND_DMA_IDLE_CNT read-only */ + write_kctxt_csr(dd, i, SEND_DMA_RELOAD_CNT, 0); + write_kctxt_csr(dd, i, SEND_DMA_DESC_CNT, 0); + /* SEND_DMA_DESC_FETCHED_CNT read-only */ + /* SEND_DMA_ENG_ERR_STATUS read-only */ + write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_MASK, 0); + write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_CLEAR, ~0ull); + /* SEND_DMA_ENG_ERR_FORCE leave alone */ + write_kctxt_csr(dd, i, SEND_DMA_CHECK_ENABLE, 0); + write_kctxt_csr(dd, i, SEND_DMA_CHECK_VL, 0); + write_kctxt_csr(dd, i, SEND_DMA_CHECK_JOB_KEY, 0); + write_kctxt_csr(dd, i, SEND_DMA_CHECK_PARTITION_KEY, 0); + write_kctxt_csr(dd, i, SEND_DMA_CHECK_SLID, 0); + write_kctxt_csr(dd, i, SEND_DMA_CHECK_OPCODE, 0); + write_kctxt_csr(dd, i, SEND_DMA_MEMORY, 0); + } +} + +/* + * Expect on entry: + * o Packet ingress is disabled, i.e. RcvCtrl.RcvPortEnable == 0 + */ +static void init_rbufs(struct hfi1_devdata *dd) +{ + u64 reg; + int count; + + /* + * Wait for DMA to stop: RxRbufPktPending and RxPktInProgress are + * clear. + */ + count = 0; + while (1) { + reg = read_csr(dd, RCV_STATUS); + if ((reg & (RCV_STATUS_RX_RBUF_PKT_PENDING_SMASK + | RCV_STATUS_RX_PKT_IN_PROGRESS_SMASK)) == 0) + break; + /* + * Give up after 1ms - maximum wait time. + * + * RBuf size is 148KiB. Slowest possible is PCIe Gen1 x1 at + * 250MB/s bandwidth. Lower rate to 66% for overhead to get: + * 148 KB / (66% * 250MB/s) = 920us + */ + if (count++ > 500) { + dd_dev_err(dd, + "%s: in-progress DMA not clearing: RcvStatus 0x%llx, continuing\n", + __func__, reg); + break; + } + udelay(2); /* do not busy-wait the CSR */ + } + + /* start the init - expect RcvCtrl to be 0 */ + write_csr(dd, RCV_CTRL, RCV_CTRL_RX_RBUF_INIT_SMASK); + + /* + * Read to force the write of Rcvtrl.RxRbufInit. There is a brief + * period after the write before RcvStatus.RxRbufInitDone is valid. + * The delay in the first run through the loop below is sufficient and + * required before the first read of RcvStatus.RxRbufInintDone. + */ + read_csr(dd, RCV_CTRL); + + /* wait for the init to finish */ + count = 0; + while (1) { + /* delay is required first time through - see above */ + udelay(2); /* do not busy-wait the CSR */ + reg = read_csr(dd, RCV_STATUS); + if (reg & (RCV_STATUS_RX_RBUF_INIT_DONE_SMASK)) + break; + + /* give up after 100us - slowest possible at 33MHz is 73us */ + if (count++ > 50) { + dd_dev_err(dd, + "%s: RcvStatus.RxRbufInit not set, continuing\n", + __func__); + break; + } + } +} + +/* set RXE CSRs to chip reset defaults */ +static void reset_rxe_csrs(struct hfi1_devdata *dd) +{ + int i, j; + + /* + * RXE Kernel CSRs + */ + write_csr(dd, RCV_CTRL, 0); + init_rbufs(dd); + /* RCV_STATUS read-only */ + /* RCV_CONTEXTS read-only */ + /* RCV_ARRAY_CNT read-only */ + /* RCV_BUF_SIZE read-only */ + write_csr(dd, RCV_BTH_QP, 0); + write_csr(dd, RCV_MULTICAST, 0); + write_csr(dd, RCV_BYPASS, 0); + write_csr(dd, RCV_VL15, 0); + /* this is a clear-down */ + write_csr(dd, RCV_ERR_INFO, + RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK); + /* RCV_ERR_STATUS read-only */ + write_csr(dd, RCV_ERR_MASK, 0); + write_csr(dd, RCV_ERR_CLEAR, ~0ull); + /* RCV_ERR_FORCE leave alone */ + for (i = 0; i < 32; i++) + write_csr(dd, RCV_QP_MAP_TABLE + (8 * i), 0); + for (i = 0; i < 4; i++) + write_csr(dd, RCV_PARTITION_KEY + (8 * i), 0); + for (i = 0; i < RXE_NUM_32_BIT_COUNTERS; i++) + write_csr(dd, RCV_COUNTER_ARRAY32 + (8 * i), 0); + for (i = 0; i < RXE_NUM_64_BIT_COUNTERS; i++) + write_csr(dd, RCV_COUNTER_ARRAY64 + (8 * i), 0); + for (i = 0; i < RXE_NUM_RSM_INSTANCES; i++) { + write_csr(dd, RCV_RSM_CFG + (8 * i), 0); + write_csr(dd, RCV_RSM_SELECT + (8 * i), 0); + write_csr(dd, RCV_RSM_MATCH + (8 * i), 0); + } + for (i = 0; i < 32; i++) + write_csr(dd, RCV_RSM_MAP_TABLE + (8 * i), 0); + + /* + * RXE Kernel and User Per-Context CSRs + */ + for (i = 0; i < dd->chip_rcv_contexts; i++) { + /* kernel */ + write_kctxt_csr(dd, i, RCV_CTXT_CTRL, 0); + /* RCV_CTXT_STATUS read-only */ + write_kctxt_csr(dd, i, RCV_EGR_CTRL, 0); + write_kctxt_csr(dd, i, RCV_TID_CTRL, 0); + write_kctxt_csr(dd, i, RCV_KEY_CTRL, 0); + write_kctxt_csr(dd, i, RCV_HDR_ADDR, 0); + write_kctxt_csr(dd, i, RCV_HDR_CNT, 0); + write_kctxt_csr(dd, i, RCV_HDR_ENT_SIZE, 0); + write_kctxt_csr(dd, i, RCV_HDR_SIZE, 0); + write_kctxt_csr(dd, i, RCV_HDR_TAIL_ADDR, 0); + write_kctxt_csr(dd, i, RCV_AVAIL_TIME_OUT, 0); + write_kctxt_csr(dd, i, RCV_HDR_OVFL_CNT, 0); + + /* user */ + /* RCV_HDR_TAIL read-only */ + write_uctxt_csr(dd, i, RCV_HDR_HEAD, 0); + /* RCV_EGR_INDEX_TAIL read-only */ + write_uctxt_csr(dd, i, RCV_EGR_INDEX_HEAD, 0); + /* RCV_EGR_OFFSET_TAIL read-only */ + for (j = 0; j < RXE_NUM_TID_FLOWS; j++) { + write_uctxt_csr(dd, i, RCV_TID_FLOW_TABLE + (8 * j), + 0); + } + } +} + +/* + * Set sc2vl tables. + * + * They power on to zeros, so to avoid send context errors + * they need to be set: + * + * SC 0-7 -> VL 0-7 (respectively) + * SC 15 -> VL 15 + * otherwise + * -> VL 0 + */ +static void init_sc2vl_tables(struct hfi1_devdata *dd) +{ + int i; + /* init per architecture spec, constrained by hardware capability */ + + /* HFI maps sent packets */ + write_csr(dd, SEND_SC2VLT0, SC2VL_VAL( + 0, + 0, 0, 1, 1, + 2, 2, 3, 3, + 4, 4, 5, 5, + 6, 6, 7, 7)); + write_csr(dd, SEND_SC2VLT1, SC2VL_VAL( + 1, + 8, 0, 9, 0, + 10, 0, 11, 0, + 12, 0, 13, 0, + 14, 0, 15, 15)); + write_csr(dd, SEND_SC2VLT2, SC2VL_VAL( + 2, + 16, 0, 17, 0, + 18, 0, 19, 0, + 20, 0, 21, 0, + 22, 0, 23, 0)); + write_csr(dd, SEND_SC2VLT3, SC2VL_VAL( + 3, + 24, 0, 25, 0, + 26, 0, 27, 0, + 28, 0, 29, 0, + 30, 0, 31, 0)); + + /* DC maps received packets */ + write_csr(dd, DCC_CFG_SC_VL_TABLE_15_0, DC_SC_VL_VAL( + 15_0, + 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, + 8, 0, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 15, 15)); + write_csr(dd, DCC_CFG_SC_VL_TABLE_31_16, DC_SC_VL_VAL( + 31_16, + 16, 0, 17, 0, 18, 0, 19, 0, 20, 0, 21, 0, 22, 0, 23, 0, + 24, 0, 25, 0, 26, 0, 27, 0, 28, 0, 29, 0, 30, 0, 31, 0)); + + /* initialize the cached sc2vl values consistently with h/w */ + for (i = 0; i < 32; i++) { + if (i < 8 || i == 15) + *((u8 *)(dd->sc2vl) + i) = (u8)i; + else + *((u8 *)(dd->sc2vl) + i) = 0; + } +} + +/* + * Read chip sizes and then reset parts to sane, disabled, values. We cannot + * depend on the chip going through a power-on reset - a driver may be loaded + * and unloaded many times. + * + * Do not write any CSR values to the chip in this routine - there may be + * a reset following the (possible) FLR in this routine. + * + */ +static void init_chip(struct hfi1_devdata *dd) +{ + int i; + + /* + * Put the HFI CSRs in a known state. + * Combine this with a DC reset. + * + * Stop the device from doing anything while we do a + * reset. We know there are no other active users of + * the device since we are now in charge. Turn off + * off all outbound and inbound traffic and make sure + * the device does not generate any interrupts. + */ + + /* disable send contexts and SDMA engines */ + write_csr(dd, SEND_CTRL, 0); + for (i = 0; i < dd->chip_send_contexts; i++) + write_kctxt_csr(dd, i, SEND_CTXT_CTRL, 0); + for (i = 0; i < dd->chip_sdma_engines; i++) + write_kctxt_csr(dd, i, SEND_DMA_CTRL, 0); + /* disable port (turn off RXE inbound traffic) and contexts */ + write_csr(dd, RCV_CTRL, 0); + for (i = 0; i < dd->chip_rcv_contexts; i++) + write_csr(dd, RCV_CTXT_CTRL, 0); + /* mask all interrupt sources */ + for (i = 0; i < CCE_NUM_INT_CSRS; i++) + write_csr(dd, CCE_INT_MASK + (8*i), 0ull); + + /* + * DC Reset: do a full DC reset before the register clear. + * A recommended length of time to hold is one CSR read, + * so reread the CceDcCtrl. Then, hold the DC in reset + * across the clear. + */ + write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_DC_RESET_SMASK); + (void) read_csr(dd, CCE_DC_CTRL); + + if (use_flr) { + /* + * A FLR will reset the SPC core and part of the PCIe. + * The parts that need to be restored have already been + * saved. + */ + dd_dev_info(dd, "Resetting CSRs with FLR\n"); + + /* do the FLR, the DC reset will remain */ + hfi1_pcie_flr(dd); + + /* restore command and BARs */ + restore_pci_variables(dd); + + if (is_a0(dd)) { + dd_dev_info(dd, "Resetting CSRs with FLR\n"); + hfi1_pcie_flr(dd); + restore_pci_variables(dd); + } + + } else { + dd_dev_info(dd, "Resetting CSRs with writes\n"); + reset_cce_csrs(dd); + reset_txe_csrs(dd); + reset_rxe_csrs(dd); + reset_asic_csrs(dd); + reset_misc_csrs(dd); + } + /* clear the DC reset */ + write_csr(dd, CCE_DC_CTRL, 0); + /* Set the LED off */ + if (is_a0(dd)) + setextled(dd, 0); + /* + * Clear the QSFP reset. + * A0 leaves the out lines floating on power on, then on an FLR + * enforces a 0 on all out pins. The driver does not touch + * ASIC_QSFPn_OUT otherwise. This leaves RESET_N low and + * anything plugged constantly in reset, if it pays attention + * to RESET_N. + * A prime example of this is SiPh. For now, set all pins high. + * I2CCLK and I2CDAT will change per direction, and INT_N and + * MODPRS_N are input only and their value is ignored. + */ + if (is_a0(dd)) { + write_csr(dd, ASIC_QSFP1_OUT, 0x1f); + write_csr(dd, ASIC_QSFP2_OUT, 0x1f); + } +} + +static void init_early_variables(struct hfi1_devdata *dd) +{ + int i; + + /* assign link credit variables */ + dd->vau = CM_VAU; + dd->link_credits = CM_GLOBAL_CREDITS; + if (is_a0(dd)) + dd->link_credits--; + dd->vcu = cu_to_vcu(hfi1_cu); + /* enough room for 8 MAD packets plus header - 17K */ + dd->vl15_init = (8 * (2048 + 128)) / vau_to_au(dd->vau); + if (dd->vl15_init > dd->link_credits) + dd->vl15_init = dd->link_credits; + + write_uninitialized_csrs_and_memories(dd); + + if (HFI1_CAP_IS_KSET(PKEY_CHECK)) + for (i = 0; i < dd->num_pports; i++) { + struct hfi1_pportdata *ppd = &dd->pport[i]; + + set_partition_keys(ppd); + } + init_sc2vl_tables(dd); +} + +static void init_kdeth_qp(struct hfi1_devdata *dd) +{ + /* user changed the KDETH_QP */ + if (kdeth_qp != 0 && kdeth_qp >= 0xff) { + /* out of range or illegal value */ + dd_dev_err(dd, "Invalid KDETH queue pair prefix, ignoring"); + kdeth_qp = 0; + } + if (kdeth_qp == 0) /* not set, or failed range check */ + kdeth_qp = DEFAULT_KDETH_QP; + + write_csr(dd, SEND_BTH_QP, + (kdeth_qp & SEND_BTH_QP_KDETH_QP_MASK) + << SEND_BTH_QP_KDETH_QP_SHIFT); + + write_csr(dd, RCV_BTH_QP, + (kdeth_qp & RCV_BTH_QP_KDETH_QP_MASK) + << RCV_BTH_QP_KDETH_QP_SHIFT); +} + +/** + * init_qpmap_table + * @dd - device data + * @first_ctxt - first context + * @last_ctxt - first context + * + * This return sets the qpn mapping table that + * is indexed by qpn[8:1]. + * + * The routine will round robin the 256 settings + * from first_ctxt to last_ctxt. + * + * The first/last looks ahead to having specialized + * receive contexts for mgmt and bypass. Normal + * verbs traffic will assumed to be on a range + * of receive contexts. + */ +static void init_qpmap_table(struct hfi1_devdata *dd, + u32 first_ctxt, + u32 last_ctxt) +{ + u64 reg = 0; + u64 regno = RCV_QP_MAP_TABLE; + int i; + u64 ctxt = first_ctxt; + + for (i = 0; i < 256;) { + if (ctxt == VL15CTXT) { + ctxt++; + if (ctxt > last_ctxt) + ctxt = first_ctxt; + continue; + } + reg |= ctxt << (8 * (i % 8)); + i++; + ctxt++; + if (ctxt > last_ctxt) + ctxt = first_ctxt; + if (i % 8 == 0) { + write_csr(dd, regno, reg); + reg = 0; + regno += 8; + } + } + if (i % 8) + write_csr(dd, regno, reg); + + add_rcvctrl(dd, RCV_CTRL_RCV_QP_MAP_ENABLE_SMASK + | RCV_CTRL_RCV_BYPASS_ENABLE_SMASK); +} + +/** + * init_qos - init RX qos + * @dd - device data + * @first_context + * + * This routine initializes Rule 0 and the + * RSM map table to implement qos. + * + * If all of the limit tests succeed, + * qos is applied based on the array + * interpretation of krcvqs where + * entry 0 is VL0. + * + * The number of vl bits (n) and the number of qpn + * bits (m) are computed to feed both the RSM map table + * and the single rule. + * + */ +static void init_qos(struct hfi1_devdata *dd, u32 first_ctxt) +{ + u8 max_by_vl = 0; + unsigned qpns_per_vl, ctxt, i, qpn, n = 1, m; + u64 *rsmmap; + u64 reg; + u8 rxcontext = is_a0(dd) ? 0 : 0xff; /* 0 is default if a0 ver. */ + + /* validate */ + if (dd->n_krcv_queues <= MIN_KERNEL_KCTXTS || + num_vls == 1 || + krcvqsset <= 1) + goto bail; + for (i = 0; i < min_t(unsigned, num_vls, krcvqsset); i++) + if (krcvqs[i] > max_by_vl) + max_by_vl = krcvqs[i]; + if (max_by_vl > 32) + goto bail; + qpns_per_vl = __roundup_pow_of_two(max_by_vl); + /* determine bits vl */ + n = ilog2(num_vls); + /* determine bits for qpn */ + m = ilog2(qpns_per_vl); + if ((m + n) > 7) + goto bail; + if (num_vls * qpns_per_vl > dd->chip_rcv_contexts) + goto bail; + rsmmap = kmalloc_array(NUM_MAP_REGS, sizeof(u64), GFP_KERNEL); + memset(rsmmap, rxcontext, NUM_MAP_REGS * sizeof(u64)); + /* init the local copy of the table */ + for (i = 0, ctxt = first_ctxt; i < num_vls; i++) { + unsigned tctxt; + + for (qpn = 0, tctxt = ctxt; + krcvqs[i] && qpn < qpns_per_vl; qpn++) { + unsigned idx, regoff, regidx; + + /* generate index <= 128 */ + idx = (qpn << n) ^ i; + regoff = (idx % 8) * 8; + regidx = idx / 8; + reg = rsmmap[regidx]; + /* replace 0xff with context number */ + reg &= ~(RCV_RSM_MAP_TABLE_RCV_CONTEXT_A_MASK + << regoff); + reg |= (u64)(tctxt++) << regoff; + rsmmap[regidx] = reg; + if (tctxt == ctxt + krcvqs[i]) + tctxt = ctxt; + } + ctxt += krcvqs[i]; + } + /* flush cached copies to chip */ + for (i = 0; i < NUM_MAP_REGS; i++) + write_csr(dd, RCV_RSM_MAP_TABLE + (8 * i), rsmmap[i]); + /* add rule0 */ + write_csr(dd, RCV_RSM_CFG /* + (8 * 0) */, + RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_MASK + << RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_SHIFT | + 2ull << RCV_RSM_CFG_PACKET_TYPE_SHIFT); + write_csr(dd, RCV_RSM_SELECT /* + (8 * 0) */, + LRH_BTH_MATCH_OFFSET + << RCV_RSM_SELECT_FIELD1_OFFSET_SHIFT | + LRH_SC_MATCH_OFFSET << RCV_RSM_SELECT_FIELD2_OFFSET_SHIFT | + LRH_SC_SELECT_OFFSET << RCV_RSM_SELECT_INDEX1_OFFSET_SHIFT | + ((u64)n) << RCV_RSM_SELECT_INDEX1_WIDTH_SHIFT | + QPN_SELECT_OFFSET << RCV_RSM_SELECT_INDEX2_OFFSET_SHIFT | + ((u64)m + (u64)n) << RCV_RSM_SELECT_INDEX2_WIDTH_SHIFT); + write_csr(dd, RCV_RSM_MATCH /* + (8 * 0) */, + LRH_BTH_MASK << RCV_RSM_MATCH_MASK1_SHIFT | + LRH_BTH_VALUE << RCV_RSM_MATCH_VALUE1_SHIFT | + LRH_SC_MASK << RCV_RSM_MATCH_MASK2_SHIFT | + LRH_SC_VALUE << RCV_RSM_MATCH_VALUE2_SHIFT); + /* Enable RSM */ + add_rcvctrl(dd, RCV_CTRL_RCV_RSM_ENABLE_SMASK); + kfree(rsmmap); + /* map everything else (non-VL15) to context 0 */ + init_qpmap_table( + dd, + 0, + 0); + dd->qos_shift = n + 1; + return; +bail: + dd->qos_shift = 1; + init_qpmap_table( + dd, + dd->n_krcv_queues > MIN_KERNEL_KCTXTS ? MIN_KERNEL_KCTXTS : 0, + dd->n_krcv_queues - 1); +} + +static void init_rxe(struct hfi1_devdata *dd) +{ + /* enable all receive errors */ + write_csr(dd, RCV_ERR_MASK, ~0ull); + /* setup QPN map table - start where VL15 context leaves off */ + init_qos( + dd, + dd->n_krcv_queues > MIN_KERNEL_KCTXTS ? MIN_KERNEL_KCTXTS : 0); + /* + * make sure RcvCtrl.RcvWcb <= PCIe Device Control + * Register Max_Payload_Size (PCI_EXP_DEVCTL in Linux PCIe config + * space, PciCfgCap2.MaxPayloadSize in HFI). There is only one + * invalid configuration: RcvCtrl.RcvWcb set to its max of 256 and + * Max_PayLoad_Size set to its minimum of 128. + * + * Presently, RcvCtrl.RcvWcb is not modified from its default of 0 + * (64 bytes). Max_Payload_Size is possibly modified upward in + * tune_pcie_caps() which is called after this routine. + */ +} + +static void init_other(struct hfi1_devdata *dd) +{ + /* enable all CCE errors */ + write_csr(dd, CCE_ERR_MASK, ~0ull); + /* enable *some* Misc errors */ + write_csr(dd, MISC_ERR_MASK, DRIVER_MISC_MASK); + /* enable all DC errors, except LCB */ + write_csr(dd, DCC_ERR_FLG_EN, ~0ull); + write_csr(dd, DC_DC8051_ERR_EN, ~0ull); +} + +/* + * Fill out the given AU table using the given CU. A CU is defined in terms + * AUs. The table is a an encoding: given the index, how many AUs does that + * represent? + * + * NOTE: Assumes that the register layout is the same for the + * local and remote tables. + */ +static void assign_cm_au_table(struct hfi1_devdata *dd, u32 cu, + u32 csr0to3, u32 csr4to7) +{ + write_csr(dd, csr0to3, + 0ull << + SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE0_SHIFT + | 1ull << + SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE1_SHIFT + | 2ull * cu << + SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE2_SHIFT + | 4ull * cu << + SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE3_SHIFT); + write_csr(dd, csr4to7, + 8ull * cu << + SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE4_SHIFT + | 16ull * cu << + SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE5_SHIFT + | 32ull * cu << + SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE6_SHIFT + | 64ull * cu << + SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE7_SHIFT); + +} + +static void assign_local_cm_au_table(struct hfi1_devdata *dd, u8 vcu) +{ + assign_cm_au_table(dd, vcu_to_cu(vcu), SEND_CM_LOCAL_AU_TABLE0_TO3, + SEND_CM_LOCAL_AU_TABLE4_TO7); +} + +void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu) +{ + assign_cm_au_table(dd, vcu_to_cu(vcu), SEND_CM_REMOTE_AU_TABLE0_TO3, + SEND_CM_REMOTE_AU_TABLE4_TO7); +} + +static void init_txe(struct hfi1_devdata *dd) +{ + int i; + + /* enable all PIO, SDMA, general, and Egress errors */ + write_csr(dd, SEND_PIO_ERR_MASK, ~0ull); + write_csr(dd, SEND_DMA_ERR_MASK, ~0ull); + write_csr(dd, SEND_ERR_MASK, ~0ull); + write_csr(dd, SEND_EGRESS_ERR_MASK, ~0ull); + + /* enable all per-context and per-SDMA engine errors */ + for (i = 0; i < dd->chip_send_contexts; i++) + write_kctxt_csr(dd, i, SEND_CTXT_ERR_MASK, ~0ull); + for (i = 0; i < dd->chip_sdma_engines; i++) + write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_MASK, ~0ull); + + /* set the local CU to AU mapping */ + assign_local_cm_au_table(dd, dd->vcu); + + /* + * Set reasonable default for Credit Return Timer + * Don't set on Simulator - causes it to choke. + */ + if (dd->icode != ICODE_FUNCTIONAL_SIMULATOR) + write_csr(dd, SEND_CM_TIMER_CTRL, HFI1_CREDIT_RETURN_RATE); +} + +int hfi1_set_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt, u16 jkey) +{ + struct hfi1_ctxtdata *rcd = dd->rcd[ctxt]; + unsigned sctxt; + int ret = 0; + u64 reg; + + if (!rcd || !rcd->sc) { + ret = -EINVAL; + goto done; + } + sctxt = rcd->sc->hw_context; + reg = SEND_CTXT_CHECK_JOB_KEY_MASK_SMASK | /* mask is always 1's */ + ((jkey & SEND_CTXT_CHECK_JOB_KEY_VALUE_MASK) << + SEND_CTXT_CHECK_JOB_KEY_VALUE_SHIFT); + /* JOB_KEY_ALLOW_PERMISSIVE is not allowed by default */ + if (HFI1_CAP_KGET_MASK(rcd->flags, ALLOW_PERM_JKEY)) + reg |= SEND_CTXT_CHECK_JOB_KEY_ALLOW_PERMISSIVE_SMASK; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_JOB_KEY, reg); + /* + * Enable send-side J_KEY integrity check, unless this is A0 h/w + * (due to A0 erratum). + */ + if (!is_a0(dd)) { + reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE); + reg |= SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg); + } + + /* Enable J_KEY check on receive context. */ + reg = RCV_KEY_CTRL_JOB_KEY_ENABLE_SMASK | + ((jkey & RCV_KEY_CTRL_JOB_KEY_VALUE_MASK) << + RCV_KEY_CTRL_JOB_KEY_VALUE_SHIFT); + write_kctxt_csr(dd, ctxt, RCV_KEY_CTRL, reg); +done: + return ret; +} + +int hfi1_clear_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt) +{ + struct hfi1_ctxtdata *rcd = dd->rcd[ctxt]; + unsigned sctxt; + int ret = 0; + u64 reg; + + if (!rcd || !rcd->sc) { + ret = -EINVAL; + goto done; + } + sctxt = rcd->sc->hw_context; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_JOB_KEY, 0); + /* + * Disable send-side J_KEY integrity check, unless this is A0 h/w. + * This check would not have been enabled for A0 h/w, see + * set_ctxt_jkey(). + */ + if (!is_a0(dd)) { + reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE); + reg &= ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg); + } + /* Turn off the J_KEY on the receive side */ + write_kctxt_csr(dd, ctxt, RCV_KEY_CTRL, 0); +done: + return ret; +} + +int hfi1_set_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt, u16 pkey) +{ + struct hfi1_ctxtdata *rcd; + unsigned sctxt; + int ret = 0; + u64 reg; + + if (ctxt < dd->num_rcv_contexts) + rcd = dd->rcd[ctxt]; + else { + ret = -EINVAL; + goto done; + } + if (!rcd || !rcd->sc) { + ret = -EINVAL; + goto done; + } + sctxt = rcd->sc->hw_context; + reg = ((u64)pkey & SEND_CTXT_CHECK_PARTITION_KEY_VALUE_MASK) << + SEND_CTXT_CHECK_PARTITION_KEY_VALUE_SHIFT; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_PARTITION_KEY, reg); + reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE); + reg |= SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg); +done: + return ret; +} + +int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt) +{ + struct hfi1_ctxtdata *rcd; + unsigned sctxt; + int ret = 0; + u64 reg; + + if (ctxt < dd->num_rcv_contexts) + rcd = dd->rcd[ctxt]; + else { + ret = -EINVAL; + goto done; + } + if (!rcd || !rcd->sc) { + ret = -EINVAL; + goto done; + } + sctxt = rcd->sc->hw_context; + reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE); + reg &= ~SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK; + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg); + write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_PARTITION_KEY, 0); +done: + return ret; +} + +/* + * Start doing the clean up the the chip. Our clean up happens in multiple + * stages and this is just the first. + */ +void hfi1_start_cleanup(struct hfi1_devdata *dd) +{ + free_cntrs(dd); + free_rcverr(dd); + clean_up_interrupts(dd); +} + +#define HFI_BASE_GUID(dev) \ + ((dev)->base_guid & ~(1ULL << GUID_HFI_INDEX_SHIFT)) + +/* + * Certain chip functions need to be initialized only once per asic + * instead of per-device. This function finds the peer device and + * checks whether that chip initialization needs to be done by this + * device. + */ +static void asic_should_init(struct hfi1_devdata *dd) +{ + unsigned long flags; + struct hfi1_devdata *tmp, *peer = NULL; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + /* Find our peer device */ + list_for_each_entry(tmp, &hfi1_dev_list, list) { + if ((HFI_BASE_GUID(dd) == HFI_BASE_GUID(tmp)) && + dd->unit != tmp->unit) { + peer = tmp; + break; + } + } + + /* + * "Claim" the ASIC for initialization if it hasn't been + " "claimed" yet. + */ + if (!peer || !(peer->flags & HFI1_DO_INIT_ASIC)) + dd->flags |= HFI1_DO_INIT_ASIC; + spin_unlock_irqrestore(&hfi1_devs_lock, flags); +} + +/** + * Allocate an initialize the device structure for the hfi. + * @dev: the pci_dev for hfi1_ib device + * @ent: pci_device_id struct for this dev + * + * Also allocates, initializes, and returns the devdata struct for this + * device instance + * + * This is global, and is called directly at init to set up the + * chip-specific function pointers for later use. + */ +struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + u64 reg; + int i, ret; + static const char * const inames[] = { /* implementation names */ + "RTL silicon", + "RTL VCS simulation", + "RTL FPGA emulation", + "Functional simulator" + }; + + dd = hfi1_alloc_devdata(pdev, + NUM_IB_PORTS * sizeof(struct hfi1_pportdata)); + if (IS_ERR(dd)) + goto bail; + ppd = dd->pport; + for (i = 0; i < dd->num_pports; i++, ppd++) { + int vl; + /* init common fields */ + hfi1_init_pportdata(pdev, ppd, dd, 0, 1); + /* DC supports 4 link widths */ + ppd->link_width_supported = + OPA_LINK_WIDTH_1X | OPA_LINK_WIDTH_2X | + OPA_LINK_WIDTH_3X | OPA_LINK_WIDTH_4X; + ppd->link_width_downgrade_supported = + ppd->link_width_supported; + /* start out enabling only 4X */ + ppd->link_width_enabled = OPA_LINK_WIDTH_4X; + ppd->link_width_downgrade_enabled = + ppd->link_width_downgrade_supported; + /* link width active is 0 when link is down */ + /* link width downgrade active is 0 when link is down */ + + if (num_vls < HFI1_MIN_VLS_SUPPORTED + || num_vls > HFI1_MAX_VLS_SUPPORTED) { + hfi1_early_err(&pdev->dev, + "Invalid num_vls %u, using %u VLs\n", + num_vls, HFI1_MAX_VLS_SUPPORTED); + num_vls = HFI1_MAX_VLS_SUPPORTED; + } + ppd->vls_supported = num_vls; + ppd->vls_operational = ppd->vls_supported; + /* Set the default MTU. */ + for (vl = 0; vl < num_vls; vl++) + dd->vld[vl].mtu = hfi1_max_mtu; + dd->vld[15].mtu = MAX_MAD_PACKET; + /* + * Set the initial values to reasonable default, will be set + * for real when link is up. + */ + ppd->lstate = IB_PORT_DOWN; + ppd->overrun_threshold = 0x4; + ppd->phy_error_threshold = 0xf; + ppd->port_crc_mode_enabled = link_crc_mask; + /* initialize supported LTP CRC mode */ + ppd->port_ltp_crc_mode = cap_to_port_ltp(link_crc_mask) << 8; + /* initialize enabled LTP CRC mode */ + ppd->port_ltp_crc_mode |= cap_to_port_ltp(link_crc_mask) << 4; + /* start in offline */ + ppd->host_link_state = HLS_DN_OFFLINE; + init_vl_arb_caches(ppd); + } + + dd->link_default = HLS_DN_POLL; + + /* + * Do remaining PCIe setup and save PCIe values in dd. + * Any error printing is already done by the init code. + * On return, we have the chip mapped. + */ + ret = hfi1_pcie_ddinit(dd, pdev, ent); + if (ret < 0) + goto bail_free; + + /* verify that reads actually work, save revision for reset check */ + dd->revision = read_csr(dd, CCE_REVISION); + if (dd->revision == ~(u64)0) { + dd_dev_err(dd, "cannot read chip CSRs\n"); + ret = -EINVAL; + goto bail_cleanup; + } + dd->majrev = (dd->revision >> CCE_REVISION_CHIP_REV_MAJOR_SHIFT) + & CCE_REVISION_CHIP_REV_MAJOR_MASK; + dd->minrev = (dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT) + & CCE_REVISION_CHIP_REV_MINOR_MASK; + + /* obtain the hardware ID - NOT related to unit, which is a + software enumeration */ + reg = read_csr(dd, CCE_REVISION2); + dd->hfi1_id = (reg >> CCE_REVISION2_HFI_ID_SHIFT) + & CCE_REVISION2_HFI_ID_MASK; + /* the variable size will remove unwanted bits */ + dd->icode = reg >> CCE_REVISION2_IMPL_CODE_SHIFT; + dd->irev = reg >> CCE_REVISION2_IMPL_REVISION_SHIFT; + dd_dev_info(dd, "Implementation: %s, revision 0x%x\n", + dd->icode < ARRAY_SIZE(inames) ? inames[dd->icode] : "unknown", + (int)dd->irev); + + /* speeds the hardware can support */ + dd->pport->link_speed_supported = OPA_LINK_SPEED_25G; + /* speeds allowed to run at */ + dd->pport->link_speed_enabled = dd->pport->link_speed_supported; + /* give a reasonable active value, will be set on link up */ + dd->pport->link_speed_active = OPA_LINK_SPEED_25G; + + dd->chip_rcv_contexts = read_csr(dd, RCV_CONTEXTS); + dd->chip_send_contexts = read_csr(dd, SEND_CONTEXTS); + dd->chip_sdma_engines = read_csr(dd, SEND_DMA_ENGINES); + dd->chip_pio_mem_size = read_csr(dd, SEND_PIO_MEM_SIZE); + dd->chip_sdma_mem_size = read_csr(dd, SEND_DMA_MEM_SIZE); + /* fix up link widths for emulation _p */ + ppd = dd->pport; + if (dd->icode == ICODE_FPGA_EMULATION && is_emulator_p(dd)) { + ppd->link_width_supported = + ppd->link_width_enabled = + ppd->link_width_downgrade_supported = + ppd->link_width_downgrade_enabled = + OPA_LINK_WIDTH_1X; + } + /* insure num_vls isn't larger than number of sdma engines */ + if (HFI1_CAP_IS_KSET(SDMA) && num_vls > dd->chip_sdma_engines) { + dd_dev_err(dd, "num_vls %u too large, using %u VLs\n", + num_vls, HFI1_MAX_VLS_SUPPORTED); + ppd->vls_supported = num_vls = HFI1_MAX_VLS_SUPPORTED; + ppd->vls_operational = ppd->vls_supported; + } + + /* + * Convert the ns parameter to the 64 * cclocks used in the CSR. + * Limit the max if larger than the field holds. If timeout is + * non-zero, then the calculated field will be at least 1. + * + * Must be after icode is set up - the cclock rate depends + * on knowing the hardware being used. + */ + dd->rcv_intr_timeout_csr = ns_to_cclock(dd, rcv_intr_timeout) / 64; + if (dd->rcv_intr_timeout_csr > + RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_MASK) + dd->rcv_intr_timeout_csr = + RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_MASK; + else if (dd->rcv_intr_timeout_csr == 0 && rcv_intr_timeout) + dd->rcv_intr_timeout_csr = 1; + + /* obtain chip sizes, reset chip CSRs */ + init_chip(dd); + + /* read in the PCIe link speed information */ + ret = pcie_speeds(dd); + if (ret) + goto bail_cleanup; + + /* needs to be done before we look for the peer device */ + read_guid(dd); + + asic_should_init(dd); + + /* read in firmware */ + ret = hfi1_firmware_init(dd); + if (ret) + goto bail_cleanup; + + /* + * In general, the PCIe Gen3 transition must occur after the + * chip has been idled (so it won't initiate any PCIe transactions + * e.g. an interrupt) and before the driver changes any registers + * (the transition will reset the registers). + * + * In particular, place this call after: + * - init_chip() - the chip will not initiate any PCIe transactions + * - pcie_speeds() - reads the current link speed + * - hfi1_firmware_init() - the needed firmware is ready to be + * downloaded + */ + ret = do_pcie_gen3_transition(dd); + if (ret) + goto bail_cleanup; + + /* start setting dd values and adjusting CSRs */ + init_early_variables(dd); + + parse_platform_config(dd); + + /* add board names as they are defined */ + dd->boardname = kmalloc(64, GFP_KERNEL); + if (!dd->boardname) + goto bail_cleanup; + snprintf(dd->boardname, 64, "Board ID 0x%llx", + dd->revision >> CCE_REVISION_BOARD_ID_LOWER_NIBBLE_SHIFT + & CCE_REVISION_BOARD_ID_LOWER_NIBBLE_MASK); + + snprintf(dd->boardversion, BOARD_VERS_MAX, + "ChipABI %u.%u, %s, ChipRev %u.%u, SW Compat %llu\n", + HFI1_CHIP_VERS_MAJ, HFI1_CHIP_VERS_MIN, + dd->boardname, + (u32)dd->majrev, + (u32)dd->minrev, + (dd->revision >> CCE_REVISION_SW_SHIFT) + & CCE_REVISION_SW_MASK); + + ret = set_up_context_variables(dd); + if (ret) + goto bail_cleanup; + + /* set initial RXE CSRs */ + init_rxe(dd); + /* set initial TXE CSRs */ + init_txe(dd); + /* set initial non-RXE, non-TXE CSRs */ + init_other(dd); + /* set up KDETH QP prefix in both RX and TX CSRs */ + init_kdeth_qp(dd); + + /* send contexts must be set up before receive contexts */ + ret = init_send_contexts(dd); + if (ret) + goto bail_cleanup; + + ret = hfi1_create_ctxts(dd); + if (ret) + goto bail_cleanup; + + dd->rcvhdrsize = DEFAULT_RCVHDRSIZE; + /* + * rcd[0] is guaranteed to be valid by this point. Also, all + * context are using the same value, as per the module parameter. + */ + dd->rhf_offset = dd->rcd[0]->rcvhdrqentsize - sizeof(u64) / sizeof(u32); + + ret = init_pervl_scs(dd); + if (ret) + goto bail_cleanup; + + /* sdma init */ + for (i = 0; i < dd->num_pports; ++i) { + ret = sdma_init(dd, i); + if (ret) + goto bail_cleanup; + } + + /* use contexts created by hfi1_create_ctxts */ + ret = set_up_interrupts(dd); + if (ret) + goto bail_cleanup; + + /* set up LCB access - must be after set_up_interrupts() */ + init_lcb_access(dd); + + snprintf(dd->serial, SERIAL_MAX, "0x%08llx\n", + dd->base_guid & 0xFFFFFF); + + dd->oui1 = dd->base_guid >> 56 & 0xFF; + dd->oui2 = dd->base_guid >> 48 & 0xFF; + dd->oui3 = dd->base_guid >> 40 & 0xFF; + + ret = load_firmware(dd); /* asymmetric with dispose_firmware() */ + if (ret) + goto bail_clear_intr; + check_fabric_firmware_versions(dd); + + thermal_init(dd); + + ret = init_cntrs(dd); + if (ret) + goto bail_clear_intr; + + ret = init_rcverr(dd); + if (ret) + goto bail_free_cntrs; + + ret = eprom_init(dd); + if (ret) + goto bail_free_rcverr; + + goto bail; + +bail_free_rcverr: + free_rcverr(dd); +bail_free_cntrs: + free_cntrs(dd); +bail_clear_intr: + clean_up_interrupts(dd); +bail_cleanup: + hfi1_pcie_ddcleanup(dd); +bail_free: + hfi1_free_devdata(dd); + dd = ERR_PTR(ret); +bail: + return dd; +} + +static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate, + u32 dw_len) +{ + u32 delta_cycles; + u32 current_egress_rate = ppd->current_egress_rate; + /* rates here are in units of 10^6 bits/sec */ + + if (desired_egress_rate == -1) + return 0; /* shouldn't happen */ + + if (desired_egress_rate >= current_egress_rate) + return 0; /* we can't help go faster, only slower */ + + delta_cycles = egress_cycles(dw_len * 4, desired_egress_rate) - + egress_cycles(dw_len * 4, current_egress_rate); + + return (u16)delta_cycles; +} + + +/** + * create_pbc - build a pbc for transmission + * @flags: special case flags or-ed in built pbc + * @srate: static rate + * @vl: vl + * @dwlen: dword length (header words + data words + pbc words) + * + * Create a PBC with the given flags, rate, VL, and length. + * + * NOTE: The PBC created will not insert any HCRC - all callers but one are + * for verbs, which does not use this PSM feature. The lone other caller + * is for the diagnostic interface which calls this if the user does not + * supply their own PBC. + */ +u64 create_pbc(struct hfi1_pportdata *ppd, u64 flags, int srate_mbs, u32 vl, + u32 dw_len) +{ + u64 pbc, delay = 0; + + if (unlikely(srate_mbs)) + delay = delay_cycles(ppd, srate_mbs, dw_len); + + pbc = flags + | (delay << PBC_STATIC_RATE_CONTROL_COUNT_SHIFT) + | ((u64)PBC_IHCRC_NONE << PBC_INSERT_HCRC_SHIFT) + | (vl & PBC_VL_MASK) << PBC_VL_SHIFT + | (dw_len & PBC_LENGTH_DWS_MASK) + << PBC_LENGTH_DWS_SHIFT; + + return pbc; +} + +#define SBUS_THERMAL 0x4f +#define SBUS_THERM_MONITOR_MODE 0x1 + +#define THERM_FAILURE(dev, ret, reason) \ + dd_dev_err((dd), \ + "Thermal sensor initialization failed: %s (%d)\n", \ + (reason), (ret)) + +/* + * Initialize the Avago Thermal sensor. + * + * After initialization, enable polling of thermal sensor through + * SBus interface. In order for this to work, the SBus Master + * firmware has to be loaded due to the fact that the HW polling + * logic uses SBus interrupts, which are not supported with + * default firmware. Otherwise, no data will be returned through + * the ASIC_STS_THERM CSR. + */ +static int thermal_init(struct hfi1_devdata *dd) +{ + int ret = 0; + + if (dd->icode != ICODE_RTL_SILICON || + !(dd->flags & HFI1_DO_INIT_ASIC)) + return ret; + + acquire_hw_mutex(dd); + dd_dev_info(dd, "Initializing thermal sensor\n"); + /* Thermal Sensor Initialization */ + /* Step 1: Reset the Thermal SBus Receiver */ + ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0, + RESET_SBUS_RECEIVER, 0); + if (ret) { + THERM_FAILURE(dd, ret, "Bus Reset"); + goto done; + } + /* Step 2: Set Reset bit in Thermal block */ + ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0, + WRITE_SBUS_RECEIVER, 0x1); + if (ret) { + THERM_FAILURE(dd, ret, "Therm Block Reset"); + goto done; + } + /* Step 3: Write clock divider value (100MHz -> 2MHz) */ + ret = sbus_request_slow(dd, SBUS_THERMAL, 0x1, + WRITE_SBUS_RECEIVER, 0x32); + if (ret) { + THERM_FAILURE(dd, ret, "Write Clock Div"); + goto done; + } + /* Step 4: Select temperature mode */ + ret = sbus_request_slow(dd, SBUS_THERMAL, 0x3, + WRITE_SBUS_RECEIVER, + SBUS_THERM_MONITOR_MODE); + if (ret) { + THERM_FAILURE(dd, ret, "Write Mode Sel"); + goto done; + } + /* Step 5: De-assert block reset and start conversion */ + ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0, + WRITE_SBUS_RECEIVER, 0x2); + if (ret) { + THERM_FAILURE(dd, ret, "Write Reset Deassert"); + goto done; + } + /* Step 5.1: Wait for first conversion (21.5ms per spec) */ + msleep(22); + + /* Enable polling of thermal readings */ + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x1); +done: + release_hw_mutex(dd); + return ret; +} + +static void handle_temp_err(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = &dd->pport[0]; + /* + * Thermal Critical Interrupt + * Put the device into forced freeze mode, take link down to + * offline, and put DC into reset. + */ + dd_dev_emerg(dd, + "Critical temperature reached! Forcing device into freeze mode!\n"); + dd->flags |= HFI1_FORCED_FREEZE; + start_freeze_handling(ppd, FREEZE_SELF|FREEZE_ABORT); + /* + * Shut DC down as much and as quickly as possible. + * + * Step 1: Take the link down to OFFLINE. This will cause the + * 8051 to put the Serdes in reset. However, we don't want to + * go through the entire link state machine since we want to + * shutdown ASAP. Furthermore, this is not a graceful shutdown + * but rather an attempt to save the chip. + * Code below is almost the same as quiet_serdes() but avoids + * all the extra work and the sleeps. + */ + ppd->driver_link_ready = 0; + ppd->link_enabled = 0; + set_physical_link_state(dd, PLS_OFFLINE | + (OPA_LINKDOWN_REASON_SMA_DISABLED << 8)); + /* + * Step 2: Shutdown LCB and 8051 + * After shutdown, do not restore DC_CFG_RESET value. + */ + dc_shutdown(dd); +} diff --git a/drivers/staging/rdma/hfi1/chip.h b/drivers/staging/rdma/hfi1/chip.h new file mode 100644 index 000000000000..f89a432c7334 --- /dev/null +++ b/drivers/staging/rdma/hfi1/chip.h @@ -0,0 +1,1035 @@ +#ifndef _CHIP_H +#define _CHIP_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * This file contains all of the defines that is specific to the HFI chip + */ + +/* sizes */ +#define CCE_NUM_MSIX_VECTORS 256 +#define CCE_NUM_INT_CSRS 12 +#define CCE_NUM_INT_MAP_CSRS 96 +#define NUM_INTERRUPT_SOURCES 768 +#define RXE_NUM_CONTEXTS 160 +#define RXE_PER_CONTEXT_SIZE 0x1000 /* 4k */ +#define RXE_NUM_TID_FLOWS 32 +#define RXE_NUM_DATA_VL 8 +#define TXE_NUM_CONTEXTS 160 +#define TXE_NUM_SDMA_ENGINES 16 +#define NUM_CONTEXTS_PER_SET 8 +#define VL_ARB_HIGH_PRIO_TABLE_SIZE 16 +#define VL_ARB_LOW_PRIO_TABLE_SIZE 16 +#define VL_ARB_TABLE_SIZE 16 +#define TXE_NUM_32_BIT_COUNTER 7 +#define TXE_NUM_64_BIT_COUNTER 30 +#define TXE_NUM_DATA_VL 8 +#define TXE_PIO_SIZE (32 * 0x100000) /* 32 MB */ +#define PIO_BLOCK_SIZE 64 /* bytes */ +#define SDMA_BLOCK_SIZE 64 /* bytes */ +#define RCV_BUF_BLOCK_SIZE 64 /* bytes */ +#define PIO_CMASK 0x7ff /* counter mask for free and fill counters */ +#define MAX_EAGER_ENTRIES 2048 /* max receive eager entries */ +#define MAX_TID_PAIR_ENTRIES 1024 /* max receive expected pairs */ +/* Virtual? Allocation Unit, defined as AU = 8*2^vAU, 64 bytes, AU is fixed + at 64 bytes for all generation one devices */ +#define CM_VAU 3 +/* HFI link credit count, AKA receive buffer depth (RBUF_DEPTH) */ +#define CM_GLOBAL_CREDITS 0x940 +/* Number of PKey entries in the HW */ +#define MAX_PKEY_VALUES 16 + +#include "chip_registers.h" + +#define RXE_PER_CONTEXT_USER (RXE + RXE_PER_CONTEXT_OFFSET) +#define TXE_PIO_SEND (TXE + TXE_PIO_SEND_OFFSET) + +/* PBC flags */ +#define PBC_INTR (1ull << 31) +#define PBC_DC_INFO_SHIFT (30) +#define PBC_DC_INFO (1ull << PBC_DC_INFO_SHIFT) +#define PBC_TEST_EBP (1ull << 29) +#define PBC_PACKET_BYPASS (1ull << 28) +#define PBC_CREDIT_RETURN (1ull << 25) +#define PBC_INSERT_BYPASS_ICRC (1ull << 24) +#define PBC_TEST_BAD_ICRC (1ull << 23) +#define PBC_FECN (1ull << 22) + +/* PbcInsertHcrc field settings */ +#define PBC_IHCRC_LKDETH 0x0 /* insert @ local KDETH offset */ +#define PBC_IHCRC_GKDETH 0x1 /* insert @ global KDETH offset */ +#define PBC_IHCRC_NONE 0x2 /* no HCRC inserted */ + +/* PBC fields */ +#define PBC_STATIC_RATE_CONTROL_COUNT_SHIFT 32 +#define PBC_STATIC_RATE_CONTROL_COUNT_MASK 0xffffull +#define PBC_STATIC_RATE_CONTROL_COUNT_SMASK \ + (PBC_STATIC_RATE_CONTROL_COUNT_MASK << \ + PBC_STATIC_RATE_CONTROL_COUNT_SHIFT) + +#define PBC_INSERT_HCRC_SHIFT 26 +#define PBC_INSERT_HCRC_MASK 0x3ull +#define PBC_INSERT_HCRC_SMASK \ + (PBC_INSERT_HCRC_MASK << PBC_INSERT_HCRC_SHIFT) + +#define PBC_VL_SHIFT 12 +#define PBC_VL_MASK 0xfull +#define PBC_VL_SMASK (PBC_VL_MASK << PBC_VL_SHIFT) + +#define PBC_LENGTH_DWS_SHIFT 0 +#define PBC_LENGTH_DWS_MASK 0xfffull +#define PBC_LENGTH_DWS_SMASK \ + (PBC_LENGTH_DWS_MASK << PBC_LENGTH_DWS_SHIFT) + +/* Credit Return Fields */ +#define CR_COUNTER_SHIFT 0 +#define CR_COUNTER_MASK 0x7ffull +#define CR_COUNTER_SMASK (CR_COUNTER_MASK << CR_COUNTER_SHIFT) + +#define CR_STATUS_SHIFT 11 +#define CR_STATUS_MASK 0x1ull +#define CR_STATUS_SMASK (CR_STATUS_MASK << CR_STATUS_SHIFT) + +#define CR_CREDIT_RETURN_DUE_TO_PBC_SHIFT 12 +#define CR_CREDIT_RETURN_DUE_TO_PBC_MASK 0x1ull +#define CR_CREDIT_RETURN_DUE_TO_PBC_SMASK \ + (CR_CREDIT_RETURN_DUE_TO_PBC_MASK << \ + CR_CREDIT_RETURN_DUE_TO_PBC_SHIFT) + +#define CR_CREDIT_RETURN_DUE_TO_THRESHOLD_SHIFT 13 +#define CR_CREDIT_RETURN_DUE_TO_THRESHOLD_MASK 0x1ull +#define CR_CREDIT_RETURN_DUE_TO_THRESHOLD_SMASK \ + (CR_CREDIT_RETURN_DUE_TO_THRESHOLD_MASK << \ + CR_CREDIT_RETURN_DUE_TO_THRESHOLD_SHIFT) + +#define CR_CREDIT_RETURN_DUE_TO_ERR_SHIFT 14 +#define CR_CREDIT_RETURN_DUE_TO_ERR_MASK 0x1ull +#define CR_CREDIT_RETURN_DUE_TO_ERR_SMASK \ + (CR_CREDIT_RETURN_DUE_TO_ERR_MASK << \ + CR_CREDIT_RETURN_DUE_TO_ERR_SHIFT) + +#define CR_CREDIT_RETURN_DUE_TO_FORCE_SHIFT 15 +#define CR_CREDIT_RETURN_DUE_TO_FORCE_MASK 0x1ull +#define CR_CREDIT_RETURN_DUE_TO_FORCE_SMASK \ + (CR_CREDIT_RETURN_DUE_TO_FORCE_MASK << \ + CR_CREDIT_RETURN_DUE_TO_FORCE_SHIFT) + +/* interrupt source numbers */ +#define IS_GENERAL_ERR_START 0 +#define IS_SDMAENG_ERR_START 16 +#define IS_SENDCTXT_ERR_START 32 +#define IS_SDMA_START 192 /* includes SDmaProgress,SDmaIdle */ +#define IS_VARIOUS_START 240 +#define IS_DC_START 248 +#define IS_RCVAVAIL_START 256 +#define IS_RCVURGENT_START 416 +#define IS_SENDCREDIT_START 576 +#define IS_RESERVED_START 736 +#define IS_MAX_SOURCES 768 + +/* derived interrupt source values */ +#define IS_GENERAL_ERR_END IS_SDMAENG_ERR_START +#define IS_SDMAENG_ERR_END IS_SENDCTXT_ERR_START +#define IS_SENDCTXT_ERR_END IS_SDMA_START +#define IS_SDMA_END IS_VARIOUS_START +#define IS_VARIOUS_END IS_DC_START +#define IS_DC_END IS_RCVAVAIL_START +#define IS_RCVAVAIL_END IS_RCVURGENT_START +#define IS_RCVURGENT_END IS_SENDCREDIT_START +#define IS_SENDCREDIT_END IS_RESERVED_START +#define IS_RESERVED_END IS_MAX_SOURCES + +/* absolute interrupt numbers for QSFP1Int and QSFP2Int */ +#define QSFP1_INT 242 +#define QSFP2_INT 243 + +/* DCC_CFG_PORT_CONFIG logical link states */ +#define LSTATE_DOWN 0x1 +#define LSTATE_INIT 0x2 +#define LSTATE_ARMED 0x3 +#define LSTATE_ACTIVE 0x4 + +/* DC8051_STS_CUR_STATE port values (physical link states) */ +#define PLS_DISABLED 0x30 +#define PLS_OFFLINE 0x90 +#define PLS_OFFLINE_QUIET 0x90 +#define PLS_OFFLINE_PLANNED_DOWN_INFORM 0x91 +#define PLS_OFFLINE_READY_TO_QUIET_LT 0x92 +#define PLS_OFFLINE_REPORT_FAILURE 0x93 +#define PLS_OFFLINE_READY_TO_QUIET_BCC 0x94 +#define PLS_POLLING 0x20 +#define PLS_POLLING_QUIET 0x20 +#define PLS_POLLING_ACTIVE 0x21 +#define PLS_CONFIGPHY 0x40 +#define PLS_CONFIGPHY_DEBOUCE 0x40 +#define PLS_CONFIGPHY_ESTCOMM 0x41 +#define PLS_CONFIGPHY_ESTCOMM_TXRX_HUNT 0x42 +#define PLS_CONFIGPHY_ESTcOMM_LOCAL_COMPLETE 0x43 +#define PLS_CONFIGPHY_OPTEQ 0x44 +#define PLS_CONFIGPHY_OPTEQ_OPTIMIZING 0x44 +#define PLS_CONFIGPHY_OPTEQ_LOCAL_COMPLETE 0x45 +#define PLS_CONFIGPHY_VERIFYCAP 0x46 +#define PLS_CONFIGPHY_VERIFYCAP_EXCHANGE 0x46 +#define PLS_CONFIGPHY_VERIFYCAP_LOCAL_COMPLETE 0x47 +#define PLS_CONFIGLT 0x48 +#define PLS_CONFIGLT_CONFIGURE 0x48 +#define PLS_CONFIGLT_LINK_TRANSFER_ACTIVE 0x49 +#define PLS_LINKUP 0x50 +#define PLS_PHYTEST 0xB0 +#define PLS_INTERNAL_SERDES_LOOPBACK 0xe1 +#define PLS_QUICK_LINKUP 0xe2 + +/* DC_DC8051_CFG_HOST_CMD_0.REQ_TYPE - 8051 host commands */ +#define HCMD_LOAD_CONFIG_DATA 0x01 +#define HCMD_READ_CONFIG_DATA 0x02 +#define HCMD_CHANGE_PHY_STATE 0x03 +#define HCMD_SEND_LCB_IDLE_MSG 0x04 +#define HCMD_MISC 0x05 +#define HCMD_READ_LCB_IDLE_MSG 0x06 +#define HCMD_READ_LCB_CSR 0x07 +#define HCMD_INTERFACE_TEST 0xff + +/* DC_DC8051_CFG_HOST_CMD_1.RETURN_CODE - 8051 host command return */ +#define HCMD_SUCCESS 2 + +/* DC_DC8051_DBG_ERR_INFO_SET_BY_8051.ERROR - error flags */ +#define SPICO_ROM_FAILED (1 << 0) +#define UNKNOWN_FRAME (1 << 1) +#define TARGET_BER_NOT_MET (1 << 2) +#define FAILED_SERDES_INTERNAL_LOOPBACK (1 << 3) +#define FAILED_SERDES_INIT (1 << 4) +#define FAILED_LNI_POLLING (1 << 5) +#define FAILED_LNI_DEBOUNCE (1 << 6) +#define FAILED_LNI_ESTBCOMM (1 << 7) +#define FAILED_LNI_OPTEQ (1 << 8) +#define FAILED_LNI_VERIFY_CAP1 (1 << 9) +#define FAILED_LNI_VERIFY_CAP2 (1 << 10) +#define FAILED_LNI_CONFIGLT (1 << 11) + +#define FAILED_LNI (FAILED_LNI_POLLING | FAILED_LNI_DEBOUNCE \ + | FAILED_LNI_ESTBCOMM | FAILED_LNI_OPTEQ \ + | FAILED_LNI_VERIFY_CAP1 \ + | FAILED_LNI_VERIFY_CAP2 \ + | FAILED_LNI_CONFIGLT) + +/* DC_DC8051_DBG_ERR_INFO_SET_BY_8051.HOST_MSG - host message flags */ +#define HOST_REQ_DONE (1 << 0) +#define BC_PWR_MGM_MSG (1 << 1) +#define BC_SMA_MSG (1 << 2) +#define BC_BCC_UNKOWN_MSG (1 << 3) +#define BC_IDLE_UNKNOWN_MSG (1 << 4) +#define EXT_DEVICE_CFG_REQ (1 << 5) +#define VERIFY_CAP_FRAME (1 << 6) +#define LINKUP_ACHIEVED (1 << 7) +#define LINK_GOING_DOWN (1 << 8) +#define LINK_WIDTH_DOWNGRADED (1 << 9) + +/* DC_DC8051_CFG_EXT_DEV_1.REQ_TYPE - 8051 host requests */ +#define HREQ_LOAD_CONFIG 0x01 +#define HREQ_SAVE_CONFIG 0x02 +#define HREQ_READ_CONFIG 0x03 +#define HREQ_SET_TX_EQ_ABS 0x04 +#define HREQ_SET_TX_EQ_REL 0x05 +#define HREQ_ENABLE 0x06 +#define HREQ_CONFIG_DONE 0xfe +#define HREQ_INTERFACE_TEST 0xff + +/* DC_DC8051_CFG_EXT_DEV_0.RETURN_CODE - 8051 host request return codes */ +#define HREQ_INVALID 0x01 +#define HREQ_SUCCESS 0x02 +#define HREQ_NOT_SUPPORTED 0x03 +#define HREQ_FEATURE_NOT_SUPPORTED 0x04 /* request specific feature */ +#define HREQ_REQUEST_REJECTED 0xfe +#define HREQ_EXECUTION_ONGOING 0xff + +/* MISC host command functions */ +#define HCMD_MISC_REQUEST_LCB_ACCESS 0x1 +#define HCMD_MISC_GRANT_LCB_ACCESS 0x2 + +/* idle flit message types */ +#define IDLE_PHYSICAL_LINK_MGMT 0x1 +#define IDLE_CRU 0x2 +#define IDLE_SMA 0x3 +#define IDLE_POWER_MGMT 0x4 + +/* idle flit message send fields (both send and read) */ +#define IDLE_PAYLOAD_MASK 0xffffffffffull /* 40 bits */ +#define IDLE_PAYLOAD_SHIFT 8 +#define IDLE_MSG_TYPE_MASK 0xf +#define IDLE_MSG_TYPE_SHIFT 0 + +/* idle flit message read fields */ +#define READ_IDLE_MSG_TYPE_MASK 0xf +#define READ_IDLE_MSG_TYPE_SHIFT 0 + +/* SMA idle flit payload commands */ +#define SMA_IDLE_ARM 1 +#define SMA_IDLE_ACTIVE 2 + +/* DC_DC8051_CFG_MODE.GENERAL bits */ +#define DISABLE_SELF_GUID_CHECK 0x2 + +/* + * Eager buffer minimum and maximum sizes supported by the hardware. + * All power-of-two sizes in between are supported as well. + * MAX_EAGER_BUFFER_TOTAL is the maximum size of memory + * allocatable for Eager buffer to a single context. All others + * are limits for the RcvArray entries. + */ +#define MIN_EAGER_BUFFER (4 * 1024) +#define MAX_EAGER_BUFFER (256 * 1024) +#define MAX_EAGER_BUFFER_TOTAL (64 * (1 << 20)) /* max per ctxt 64MB */ +#define MAX_EXPECTED_BUFFER (2048 * 1024) + +/* + * Receive expected base and count and eager base and count increment - + * the CSR fields hold multiples of this value. + */ +#define RCV_SHIFT 3 +#define RCV_INCREMENT (1 << RCV_SHIFT) + +/* + * Receive header queue entry increment - the CSR holds multiples of + * this value. + */ +#define HDRQ_SIZE_SHIFT 5 +#define HDRQ_INCREMENT (1 << HDRQ_SIZE_SHIFT) + +/* + * Freeze handling flags + */ +#define FREEZE_ABORT 0x01 /* do not do recovery */ +#define FREEZE_SELF 0x02 /* initiate the freeze */ +#define FREEZE_LINK_DOWN 0x04 /* link is down */ + +/* + * Chip implementation codes. + */ +#define ICODE_RTL_SILICON 0x00 +#define ICODE_RTL_VCS_SIMULATION 0x01 +#define ICODE_FPGA_EMULATION 0x02 +#define ICODE_FUNCTIONAL_SIMULATOR 0x03 + +/* + * 8051 data memory size. + */ +#define DC8051_DATA_MEM_SIZE 0x1000 + +/* + * 8051 firmware registers + */ +#define NUM_GENERAL_FIELDS 0x17 +#define NUM_LANE_FIELDS 0x8 + +/* 8051 general register Field IDs */ +#define TX_SETTINGS 0x06 +#define VERIFY_CAP_LOCAL_PHY 0x07 +#define VERIFY_CAP_LOCAL_FABRIC 0x08 +#define VERIFY_CAP_LOCAL_LINK_WIDTH 0x09 +#define LOCAL_DEVICE_ID 0x0a +#define LOCAL_LNI_INFO 0x0c +#define REMOTE_LNI_INFO 0x0d +#define MISC_STATUS 0x0e +#define VERIFY_CAP_REMOTE_PHY 0x0f +#define VERIFY_CAP_REMOTE_FABRIC 0x10 +#define VERIFY_CAP_REMOTE_LINK_WIDTH 0x11 +#define LAST_LOCAL_STATE_COMPLETE 0x12 +#define LAST_REMOTE_STATE_COMPLETE 0x13 +#define LINK_QUALITY_INFO 0x14 +#define REMOTE_DEVICE_ID 0x15 + +/* Lane ID for general configuration registers */ +#define GENERAL_CONFIG 4 + +/* LOAD_DATA 8051 command shifts and fields */ +#define LOAD_DATA_FIELD_ID_SHIFT 40 +#define LOAD_DATA_FIELD_ID_MASK 0xfull +#define LOAD_DATA_LANE_ID_SHIFT 32 +#define LOAD_DATA_LANE_ID_MASK 0xfull +#define LOAD_DATA_DATA_SHIFT 0x0 +#define LOAD_DATA_DATA_MASK 0xffffffffull + +/* READ_DATA 8051 command shifts and fields */ +#define READ_DATA_FIELD_ID_SHIFT 40 +#define READ_DATA_FIELD_ID_MASK 0xffull +#define READ_DATA_LANE_ID_SHIFT 32 +#define READ_DATA_LANE_ID_MASK 0xffull +#define READ_DATA_DATA_SHIFT 0x0 +#define READ_DATA_DATA_MASK 0xffffffffull + +/* TX settings fields */ +#define ENABLE_LANE_TX_SHIFT 0 +#define ENABLE_LANE_TX_MASK 0xff +#define TX_POLARITY_INVERSION_SHIFT 8 +#define TX_POLARITY_INVERSION_MASK 0xff +#define RX_POLARITY_INVERSION_SHIFT 16 +#define RX_POLARITY_INVERSION_MASK 0xff +#define MAX_RATE_SHIFT 24 +#define MAX_RATE_MASK 0xff + +/* verify capability PHY fields */ +#define CONTINIOUS_REMOTE_UPDATE_SUPPORT_SHIFT 0x4 +#define CONTINIOUS_REMOTE_UPDATE_SUPPORT_MASK 0x1 +#define POWER_MANAGEMENT_SHIFT 0x0 +#define POWER_MANAGEMENT_MASK 0xf + +/* 8051 lane register Field IDs */ +#define SPICO_FW_VERSION 0x7 /* SPICO firmware version */ + +/* SPICO firmware version fields */ +#define SPICO_ROM_VERSION_SHIFT 0 +#define SPICO_ROM_VERSION_MASK 0xffff +#define SPICO_ROM_PROD_ID_SHIFT 16 +#define SPICO_ROM_PROD_ID_MASK 0xffff + +/* verify capability fabric fields */ +#define VAU_SHIFT 0 +#define VAU_MASK 0x0007 +#define Z_SHIFT 3 +#define Z_MASK 0x0001 +#define VCU_SHIFT 4 +#define VCU_MASK 0x0007 +#define VL15BUF_SHIFT 8 +#define VL15BUF_MASK 0x0fff +#define CRC_SIZES_SHIFT 20 +#define CRC_SIZES_MASK 0x7 + +/* verify capability local link width fields */ +#define LINK_WIDTH_SHIFT 0 /* also for remote link width */ +#define LINK_WIDTH_MASK 0xffff /* also for remote link width */ +#define LOCAL_FLAG_BITS_SHIFT 16 +#define LOCAL_FLAG_BITS_MASK 0xff +#define MISC_CONFIG_BITS_SHIFT 24 +#define MISC_CONFIG_BITS_MASK 0xff + +/* verify capability remote link width fields */ +#define REMOTE_TX_RATE_SHIFT 16 +#define REMOTE_TX_RATE_MASK 0xff + +/* LOCAL_DEVICE_ID fields */ +#define LOCAL_DEVICE_REV_SHIFT 0 +#define LOCAL_DEVICE_REV_MASK 0xff +#define LOCAL_DEVICE_ID_SHIFT 8 +#define LOCAL_DEVICE_ID_MASK 0xffff + +/* REMOTE_DEVICE_ID fields */ +#define REMOTE_DEVICE_REV_SHIFT 0 +#define REMOTE_DEVICE_REV_MASK 0xff +#define REMOTE_DEVICE_ID_SHIFT 8 +#define REMOTE_DEVICE_ID_MASK 0xffff + +/* local LNI link width fields */ +#define ENABLE_LANE_RX_SHIFT 16 +#define ENABLE_LANE_RX_MASK 0xff + +/* mask, shift for reading 'mgmt_enabled' value from REMOTE_LNI_INFO field */ +#define MGMT_ALLOWED_SHIFT 23 +#define MGMT_ALLOWED_MASK 0x1 + +/* mask, shift for 'link_quality' within LINK_QUALITY_INFO field */ +#define LINK_QUALITY_SHIFT 24 +#define LINK_QUALITY_MASK 0x7 + +/* + * mask, shift for reading 'planned_down_remote_reason_code' + * from LINK_QUALITY_INFO field + */ +#define DOWN_REMOTE_REASON_SHIFT 16 +#define DOWN_REMOTE_REASON_MASK 0xff + +/* verify capability PHY power management bits */ +#define PWRM_BER_CONTROL 0x1 +#define PWRM_BANDWIDTH_CONTROL 0x2 + +/* verify capability fabric CRC size bits */ +enum { + CAP_CRC_14B = (1 << 0), /* 14b CRC */ + CAP_CRC_48B = (1 << 1), /* 48b CRC */ + CAP_CRC_12B_16B_PER_LANE = (1 << 2) /* 12b-16b per lane CRC */ +}; + +#define SUPPORTED_CRCS (CAP_CRC_14B | CAP_CRC_48B) + +/* misc status version fields */ +#define STS_FM_VERSION_A_SHIFT 16 +#define STS_FM_VERSION_A_MASK 0xff +#define STS_FM_VERSION_B_SHIFT 24 +#define STS_FM_VERSION_B_MASK 0xff + +/* LCB_CFG_CRC_MODE TX_VAL and RX_VAL CRC mode values */ +#define LCB_CRC_16B 0x0 /* 16b CRC */ +#define LCB_CRC_14B 0x1 /* 14b CRC */ +#define LCB_CRC_48B 0x2 /* 48b CRC */ +#define LCB_CRC_12B_16B_PER_LANE 0x3 /* 12b-16b per lane CRC */ + +/* the following enum is (almost) a copy/paste of the definition + * in the OPA spec, section 20.2.2.6.8 (PortInfo) */ +enum { + PORT_LTP_CRC_MODE_NONE = 0, + PORT_LTP_CRC_MODE_14 = 1, /* 14-bit LTP CRC mode (optional) */ + PORT_LTP_CRC_MODE_16 = 2, /* 16-bit LTP CRC mode */ + PORT_LTP_CRC_MODE_48 = 4, + /* 48-bit overlapping LTP CRC mode (optional) */ + PORT_LTP_CRC_MODE_PER_LANE = 8 + /* 12 to 16 bit per lane LTP CRC mode (optional) */ +}; + +/* timeouts */ +#define LINK_RESTART_DELAY 1000 /* link restart delay, in ms */ +#define TIMEOUT_8051_START 5000 /* 8051 start timeout, in ms */ +#define DC8051_COMMAND_TIMEOUT 20000 /* DC8051 command timeout, in ms */ +#define FREEZE_STATUS_TIMEOUT 20 /* wait for freeze indicators, in ms */ +#define VL_STATUS_CLEAR_TIMEOUT 5000 /* per-VL status clear, in ms */ +#define CCE_STATUS_TIMEOUT 10 /* time to clear CCE Status, in ms */ + +/* cclock tick time, in picoseconds per tick: 1/speed * 10^12 */ +#define ASIC_CCLOCK_PS 1242 /* 805 MHz */ +#define FPGA_CCLOCK_PS 30300 /* 33 MHz */ + +/* + * Mask of enabled MISC errors. Do not enable the two RSA engine errors - + * see firmware.c:run_rsa() for details. + */ +#define DRIVER_MISC_MASK \ + (~(MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK \ + | MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK)) + +/* valid values for the loopback module parameter */ +#define LOOPBACK_NONE 0 /* no loopback - default */ +#define LOOPBACK_SERDES 1 +#define LOOPBACK_LCB 2 +#define LOOPBACK_CABLE 3 /* external cable */ + +/* read and write hardware registers */ +u64 read_csr(const struct hfi1_devdata *dd, u32 offset); +void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value); + +/* + * The *_kctxt_* flavor of the CSR read/write functions are for + * per-context or per-SDMA CSRs that are not mappable to user-space. + * Their spacing is not a PAGE_SIZE multiple. + */ +static inline u64 read_kctxt_csr(const struct hfi1_devdata *dd, int ctxt, + u32 offset0) +{ + /* kernel per-context CSRs are separated by 0x100 */ + return read_csr(dd, offset0 + (0x100 * ctxt)); +} + +static inline void write_kctxt_csr(struct hfi1_devdata *dd, int ctxt, + u32 offset0, u64 value) +{ + /* kernel per-context CSRs are separated by 0x100 */ + write_csr(dd, offset0 + (0x100 * ctxt), value); +} + +int read_lcb_csr(struct hfi1_devdata *dd, u32 offset, u64 *data); +int write_lcb_csr(struct hfi1_devdata *dd, u32 offset, u64 data); + +void __iomem *get_csr_addr( + struct hfi1_devdata *dd, + u32 offset); + +static inline void __iomem *get_kctxt_csr_addr( + struct hfi1_devdata *dd, + int ctxt, + u32 offset0) +{ + return get_csr_addr(dd, offset0 + (0x100 * ctxt)); +} + +/* + * The *_uctxt_* flavor of the CSR read/write functions are for + * per-context CSRs that are mappable to user space. All these CSRs + * are spaced by a PAGE_SIZE multiple in order to be mappable to + * different processes without exposing other contexts' CSRs + */ +static inline u64 read_uctxt_csr(const struct hfi1_devdata *dd, int ctxt, + u32 offset0) +{ + /* user per-context CSRs are separated by 0x1000 */ + return read_csr(dd, offset0 + (0x1000 * ctxt)); +} + +static inline void write_uctxt_csr(struct hfi1_devdata *dd, int ctxt, + u32 offset0, u64 value) +{ + /* user per-context CSRs are separated by 0x1000 */ + write_csr(dd, offset0 + (0x1000 * ctxt), value); +} + +u64 create_pbc(struct hfi1_pportdata *ppd, u64, int, u32, u32); + +/* firmware.c */ +#define NUM_PCIE_SERDES 16 /* number of PCIe serdes on the SBus */ +extern const u8 pcie_serdes_broadcast[]; +extern const u8 pcie_pcs_addrs[2][NUM_PCIE_SERDES]; +/* SBus commands */ +#define RESET_SBUS_RECEIVER 0x20 +#define WRITE_SBUS_RECEIVER 0x21 +void sbus_request(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in); +int sbus_request_slow(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in); +void set_sbus_fast_mode(struct hfi1_devdata *dd); +void clear_sbus_fast_mode(struct hfi1_devdata *dd); +int hfi1_firmware_init(struct hfi1_devdata *dd); +int load_pcie_firmware(struct hfi1_devdata *dd); +int load_firmware(struct hfi1_devdata *dd); +void dispose_firmware(void); +int acquire_hw_mutex(struct hfi1_devdata *dd); +void release_hw_mutex(struct hfi1_devdata *dd); +void fabric_serdes_reset(struct hfi1_devdata *dd); +int read_8051_data(struct hfi1_devdata *dd, u32 addr, u32 len, u64 *result); + +/* chip.c */ +void read_misc_status(struct hfi1_devdata *dd, u8 *ver_a, u8 *ver_b); +void read_guid(struct hfi1_devdata *dd); +int wait_fm_ready(struct hfi1_devdata *dd, u32 mstimeout); +void set_link_down_reason(struct hfi1_pportdata *ppd, u8 lcl_reason, + u8 neigh_reason, u8 rem_reason); +int set_link_state(struct hfi1_pportdata *, u32 state); +int port_ltp_to_cap(int port_ltp); +void handle_verify_cap(struct work_struct *work); +void handle_freeze(struct work_struct *work); +void handle_link_up(struct work_struct *work); +void handle_link_down(struct work_struct *work); +void handle_link_downgrade(struct work_struct *work); +void handle_link_bounce(struct work_struct *work); +void handle_sma_message(struct work_struct *work); +void start_freeze_handling(struct hfi1_pportdata *ppd, int flags); +int send_idle_sma(struct hfi1_devdata *dd, u64 message); +int start_link(struct hfi1_pportdata *ppd); +void init_qsfp(struct hfi1_pportdata *ppd); +int bringup_serdes(struct hfi1_pportdata *ppd); +void set_intr_state(struct hfi1_devdata *dd, u32 enable); +void apply_link_downgrade_policy(struct hfi1_pportdata *ppd, + int refresh_widths); +void update_usrhead(struct hfi1_ctxtdata *, u32, u32, u32, u32, u32); +int stop_drain_data_vls(struct hfi1_devdata *dd); +int open_fill_data_vls(struct hfi1_devdata *dd); +u32 ns_to_cclock(struct hfi1_devdata *dd, u32 ns); +u32 cclock_to_ns(struct hfi1_devdata *dd, u32 cclock); +void get_linkup_link_widths(struct hfi1_pportdata *ppd); +void read_ltp_rtt(struct hfi1_devdata *dd); +void clear_linkup_counters(struct hfi1_devdata *dd); +u32 hdrqempty(struct hfi1_ctxtdata *rcd); +int is_a0(struct hfi1_devdata *dd); +int is_ax(struct hfi1_devdata *dd); +int is_bx(struct hfi1_devdata *dd); +u32 read_physical_state(struct hfi1_devdata *dd); +u32 chip_to_opa_pstate(struct hfi1_devdata *dd, u32 chip_pstate); +u32 get_logical_state(struct hfi1_pportdata *ppd); +const char *opa_lstate_name(u32 lstate); +const char *opa_pstate_name(u32 pstate); +u32 driver_physical_state(struct hfi1_pportdata *ppd); +u32 driver_logical_state(struct hfi1_pportdata *ppd); + +int acquire_lcb_access(struct hfi1_devdata *dd, int sleep_ok); +int release_lcb_access(struct hfi1_devdata *dd, int sleep_ok); +#define LCB_START DC_LCB_CSRS +#define LCB_END DC_8051_CSRS /* next block is 8051 */ +static inline int is_lcb_offset(u32 offset) +{ + return (offset >= LCB_START && offset < LCB_END); +} + +extern uint num_vls; + +extern uint disable_integrity; +u64 read_dev_cntr(struct hfi1_devdata *dd, int index, int vl); +u64 write_dev_cntr(struct hfi1_devdata *dd, int index, int vl, u64 data); +u64 read_port_cntr(struct hfi1_pportdata *ppd, int index, int vl); +u64 write_port_cntr(struct hfi1_pportdata *ppd, int index, int vl, u64 data); + +/* Per VL indexes */ +enum { + C_VL_0 = 0, + C_VL_1, + C_VL_2, + C_VL_3, + C_VL_4, + C_VL_5, + C_VL_6, + C_VL_7, + C_VL_15, + C_VL_COUNT +}; + +static inline int vl_from_idx(int idx) +{ + return (idx == C_VL_15 ? 15 : idx); +} + +static inline int idx_from_vl(int vl) +{ + return (vl == 15 ? C_VL_15 : vl); +} + +/* Per device counter indexes */ +enum { + C_RCV_OVF = 0, + C_RX_TID_FULL, + C_RX_TID_INVALID, + C_RX_TID_FLGMS, + C_RX_CTX_RHQS, + C_RX_CTX_EGRS, + C_RCV_TID_FLSMS, + C_CCE_PCI_CR_ST, + C_CCE_PCI_TR_ST, + C_CCE_PIO_WR_ST, + C_CCE_ERR_INT, + C_CCE_SDMA_INT, + C_CCE_MISC_INT, + C_CCE_RCV_AV_INT, + C_CCE_RCV_URG_INT, + C_CCE_SEND_CR_INT, + C_DC_UNC_ERR, + C_DC_RCV_ERR, + C_DC_FM_CFG_ERR, + C_DC_RMT_PHY_ERR, + C_DC_DROPPED_PKT, + C_DC_MC_XMIT_PKTS, + C_DC_MC_RCV_PKTS, + C_DC_XMIT_CERR, + C_DC_RCV_CERR, + C_DC_RCV_FCC, + C_DC_XMIT_FCC, + C_DC_XMIT_FLITS, + C_DC_RCV_FLITS, + C_DC_XMIT_PKTS, + C_DC_RCV_PKTS, + C_DC_RX_FLIT_VL, + C_DC_RX_PKT_VL, + C_DC_RCV_FCN, + C_DC_RCV_FCN_VL, + C_DC_RCV_BCN, + C_DC_RCV_BCN_VL, + C_DC_RCV_BBL, + C_DC_RCV_BBL_VL, + C_DC_MARK_FECN, + C_DC_MARK_FECN_VL, + C_DC_TOTAL_CRC, + C_DC_CRC_LN0, + C_DC_CRC_LN1, + C_DC_CRC_LN2, + C_DC_CRC_LN3, + C_DC_CRC_MULT_LN, + C_DC_TX_REPLAY, + C_DC_RX_REPLAY, + C_DC_SEQ_CRC_CNT, + C_DC_ESC0_ONLY_CNT, + C_DC_ESC0_PLUS1_CNT, + C_DC_ESC0_PLUS2_CNT, + C_DC_REINIT_FROM_PEER_CNT, + C_DC_SBE_CNT, + C_DC_MISC_FLG_CNT, + C_DC_PRF_GOOD_LTP_CNT, + C_DC_PRF_ACCEPTED_LTP_CNT, + C_DC_PRF_RX_FLIT_CNT, + C_DC_PRF_TX_FLIT_CNT, + C_DC_PRF_CLK_CNTR, + C_DC_PG_DBG_FLIT_CRDTS_CNT, + C_DC_PG_STS_PAUSE_COMPLETE_CNT, + C_DC_PG_STS_TX_SBE_CNT, + C_DC_PG_STS_TX_MBE_CNT, + C_SW_CPU_INTR, + C_SW_CPU_RCV_LIM, + C_SW_VTX_WAIT, + C_SW_PIO_WAIT, + C_SW_KMEM_WAIT, + DEV_CNTR_LAST /* Must be kept last */ +}; + +/* Per port counter indexes */ +enum { + C_TX_UNSUP_VL = 0, + C_TX_INVAL_LEN, + C_TX_MM_LEN_ERR, + C_TX_UNDERRUN, + C_TX_FLOW_STALL, + C_TX_DROPPED, + C_TX_HDR_ERR, + C_TX_PKT, + C_TX_WORDS, + C_TX_WAIT, + C_TX_FLIT_VL, + C_TX_PKT_VL, + C_TX_WAIT_VL, + C_RX_PKT, + C_RX_WORDS, + C_SW_LINK_DOWN, + C_SW_LINK_UP, + C_SW_XMIT_DSCD, + C_SW_XMIT_DSCD_VL, + C_SW_XMIT_CSTR_ERR, + C_SW_RCV_CSTR_ERR, + C_SW_IBP_LOOP_PKTS, + C_SW_IBP_RC_RESENDS, + C_SW_IBP_RNR_NAKS, + C_SW_IBP_OTHER_NAKS, + C_SW_IBP_RC_TIMEOUTS, + C_SW_IBP_PKT_DROPS, + C_SW_IBP_DMA_WAIT, + C_SW_IBP_RC_SEQNAK, + C_SW_IBP_RC_DUPREQ, + C_SW_IBP_RDMA_SEQ, + C_SW_IBP_UNALIGNED, + C_SW_IBP_SEQ_NAK, + C_SW_CPU_RC_ACKS, + C_SW_CPU_RC_QACKS, + C_SW_CPU_RC_DELAYED_COMP, + C_RCV_HDR_OVF_0, + C_RCV_HDR_OVF_1, + C_RCV_HDR_OVF_2, + C_RCV_HDR_OVF_3, + C_RCV_HDR_OVF_4, + C_RCV_HDR_OVF_5, + C_RCV_HDR_OVF_6, + C_RCV_HDR_OVF_7, + C_RCV_HDR_OVF_8, + C_RCV_HDR_OVF_9, + C_RCV_HDR_OVF_10, + C_RCV_HDR_OVF_11, + C_RCV_HDR_OVF_12, + C_RCV_HDR_OVF_13, + C_RCV_HDR_OVF_14, + C_RCV_HDR_OVF_15, + C_RCV_HDR_OVF_16, + C_RCV_HDR_OVF_17, + C_RCV_HDR_OVF_18, + C_RCV_HDR_OVF_19, + C_RCV_HDR_OVF_20, + C_RCV_HDR_OVF_21, + C_RCV_HDR_OVF_22, + C_RCV_HDR_OVF_23, + C_RCV_HDR_OVF_24, + C_RCV_HDR_OVF_25, + C_RCV_HDR_OVF_26, + C_RCV_HDR_OVF_27, + C_RCV_HDR_OVF_28, + C_RCV_HDR_OVF_29, + C_RCV_HDR_OVF_30, + C_RCV_HDR_OVF_31, + C_RCV_HDR_OVF_32, + C_RCV_HDR_OVF_33, + C_RCV_HDR_OVF_34, + C_RCV_HDR_OVF_35, + C_RCV_HDR_OVF_36, + C_RCV_HDR_OVF_37, + C_RCV_HDR_OVF_38, + C_RCV_HDR_OVF_39, + C_RCV_HDR_OVF_40, + C_RCV_HDR_OVF_41, + C_RCV_HDR_OVF_42, + C_RCV_HDR_OVF_43, + C_RCV_HDR_OVF_44, + C_RCV_HDR_OVF_45, + C_RCV_HDR_OVF_46, + C_RCV_HDR_OVF_47, + C_RCV_HDR_OVF_48, + C_RCV_HDR_OVF_49, + C_RCV_HDR_OVF_50, + C_RCV_HDR_OVF_51, + C_RCV_HDR_OVF_52, + C_RCV_HDR_OVF_53, + C_RCV_HDR_OVF_54, + C_RCV_HDR_OVF_55, + C_RCV_HDR_OVF_56, + C_RCV_HDR_OVF_57, + C_RCV_HDR_OVF_58, + C_RCV_HDR_OVF_59, + C_RCV_HDR_OVF_60, + C_RCV_HDR_OVF_61, + C_RCV_HDR_OVF_62, + C_RCV_HDR_OVF_63, + C_RCV_HDR_OVF_64, + C_RCV_HDR_OVF_65, + C_RCV_HDR_OVF_66, + C_RCV_HDR_OVF_67, + C_RCV_HDR_OVF_68, + C_RCV_HDR_OVF_69, + C_RCV_HDR_OVF_70, + C_RCV_HDR_OVF_71, + C_RCV_HDR_OVF_72, + C_RCV_HDR_OVF_73, + C_RCV_HDR_OVF_74, + C_RCV_HDR_OVF_75, + C_RCV_HDR_OVF_76, + C_RCV_HDR_OVF_77, + C_RCV_HDR_OVF_78, + C_RCV_HDR_OVF_79, + C_RCV_HDR_OVF_80, + C_RCV_HDR_OVF_81, + C_RCV_HDR_OVF_82, + C_RCV_HDR_OVF_83, + C_RCV_HDR_OVF_84, + C_RCV_HDR_OVF_85, + C_RCV_HDR_OVF_86, + C_RCV_HDR_OVF_87, + C_RCV_HDR_OVF_88, + C_RCV_HDR_OVF_89, + C_RCV_HDR_OVF_90, + C_RCV_HDR_OVF_91, + C_RCV_HDR_OVF_92, + C_RCV_HDR_OVF_93, + C_RCV_HDR_OVF_94, + C_RCV_HDR_OVF_95, + C_RCV_HDR_OVF_96, + C_RCV_HDR_OVF_97, + C_RCV_HDR_OVF_98, + C_RCV_HDR_OVF_99, + C_RCV_HDR_OVF_100, + C_RCV_HDR_OVF_101, + C_RCV_HDR_OVF_102, + C_RCV_HDR_OVF_103, + C_RCV_HDR_OVF_104, + C_RCV_HDR_OVF_105, + C_RCV_HDR_OVF_106, + C_RCV_HDR_OVF_107, + C_RCV_HDR_OVF_108, + C_RCV_HDR_OVF_109, + C_RCV_HDR_OVF_110, + C_RCV_HDR_OVF_111, + C_RCV_HDR_OVF_112, + C_RCV_HDR_OVF_113, + C_RCV_HDR_OVF_114, + C_RCV_HDR_OVF_115, + C_RCV_HDR_OVF_116, + C_RCV_HDR_OVF_117, + C_RCV_HDR_OVF_118, + C_RCV_HDR_OVF_119, + C_RCV_HDR_OVF_120, + C_RCV_HDR_OVF_121, + C_RCV_HDR_OVF_122, + C_RCV_HDR_OVF_123, + C_RCV_HDR_OVF_124, + C_RCV_HDR_OVF_125, + C_RCV_HDR_OVF_126, + C_RCV_HDR_OVF_127, + C_RCV_HDR_OVF_128, + C_RCV_HDR_OVF_129, + C_RCV_HDR_OVF_130, + C_RCV_HDR_OVF_131, + C_RCV_HDR_OVF_132, + C_RCV_HDR_OVF_133, + C_RCV_HDR_OVF_134, + C_RCV_HDR_OVF_135, + C_RCV_HDR_OVF_136, + C_RCV_HDR_OVF_137, + C_RCV_HDR_OVF_138, + C_RCV_HDR_OVF_139, + C_RCV_HDR_OVF_140, + C_RCV_HDR_OVF_141, + C_RCV_HDR_OVF_142, + C_RCV_HDR_OVF_143, + C_RCV_HDR_OVF_144, + C_RCV_HDR_OVF_145, + C_RCV_HDR_OVF_146, + C_RCV_HDR_OVF_147, + C_RCV_HDR_OVF_148, + C_RCV_HDR_OVF_149, + C_RCV_HDR_OVF_150, + C_RCV_HDR_OVF_151, + C_RCV_HDR_OVF_152, + C_RCV_HDR_OVF_153, + C_RCV_HDR_OVF_154, + C_RCV_HDR_OVF_155, + C_RCV_HDR_OVF_156, + C_RCV_HDR_OVF_157, + C_RCV_HDR_OVF_158, + C_RCV_HDR_OVF_159, + PORT_CNTR_LAST /* Must be kept last */ +}; + +u64 get_all_cpu_total(u64 __percpu *cntr); +void hfi1_start_cleanup(struct hfi1_devdata *dd); +void hfi1_clear_tids(struct hfi1_ctxtdata *rcd); +struct hfi1_message_header *hfi1_get_msgheader( + struct hfi1_devdata *dd, __le32 *rhf_addr); +int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd, + struct hfi1_ctxt_info *kinfo); +u64 hfi1_gpio_mod(struct hfi1_devdata *dd, u32 target, u32 data, u32 dir, + u32 mask); +int hfi1_init_ctxt(struct send_context *sc); +void hfi1_put_tid(struct hfi1_devdata *dd, u32 index, + u32 type, unsigned long pa, u16 order); +void hfi1_quiet_serdes(struct hfi1_pportdata *ppd); +void hfi1_rcvctrl(struct hfi1_devdata *dd, unsigned int op, int ctxt); +u32 hfi1_read_cntrs(struct hfi1_devdata *dd, loff_t pos, char **namep, + u64 **cntrp); +u32 hfi1_read_portcntrs(struct hfi1_devdata *dd, loff_t pos, u32 port, + char **namep, u64 **cntrp); +u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd); +int hfi1_get_ib_cfg(struct hfi1_pportdata *ppd, int which); +int hfi1_set_ib_cfg(struct hfi1_pportdata *ppd, int which, u32 val); +int hfi1_set_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt, u16 jkey); +int hfi1_clear_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt); +int hfi1_set_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt, u16 pkey); +int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt); +void hfi1_read_link_quality(struct hfi1_devdata *dd, u8 *link_quality); + +/* + * Interrupt source table. + * + * Each entry is an interrupt source "type". It is ordered by increasing + * number. + */ +struct is_table { + int start; /* interrupt source type start */ + int end; /* interrupt source type end */ + /* routine that returns the name of the interrupt source */ + char *(*is_name)(char *name, size_t size, unsigned int source); + /* routine to call when receiving an interrupt */ + void (*is_int)(struct hfi1_devdata *dd, unsigned int source); +}; + +#endif /* _CHIP_H */ diff --git a/drivers/staging/rdma/hfi1/chip_registers.h b/drivers/staging/rdma/hfi1/chip_registers.h new file mode 100644 index 000000000000..6521030018d8 --- /dev/null +++ b/drivers/staging/rdma/hfi1/chip_registers.h @@ -0,0 +1,1289 @@ +#ifndef DEF_CHIP_REG +#define DEF_CHIP_REG + +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#define CORE 0x000000000000 +#define CCE (CORE + 0x000000000000) +#define ASIC (CORE + 0x000000400000) +#define MISC (CORE + 0x000000500000) +#define DC_TOP_CSRS (CORE + 0x000000600000) +#define CHIP_DEBUG (CORE + 0x000000700000) +#define RXE (CORE + 0x000001000000) +#define TXE (CORE + 0x000001800000) +#define DCC_CSRS (DC_TOP_CSRS + 0x000000000000) +#define DC_LCB_CSRS (DC_TOP_CSRS + 0x000000001000) +#define DC_8051_CSRS (DC_TOP_CSRS + 0x000000002000) +#define PCIE 0 + +#define ASIC_NUM_SCRATCH 4 +#define CCE_ERR_INT_CNT 0 +#define CCE_MISC_INT_CNT 2 +#define CCE_NUM_32_BIT_COUNTERS 3 +#define CCE_NUM_32_BIT_INT_COUNTERS 6 +#define CCE_NUM_INT_CSRS 12 +#define CCE_NUM_INT_MAP_CSRS 96 +#define CCE_NUM_MSIX_PBAS 4 +#define CCE_NUM_MSIX_VECTORS 256 +#define CCE_NUM_SCRATCH 4 +#define CCE_PCIE_POSTED_CRDT_STALL_CNT 2 +#define CCE_PCIE_TRGT_STALL_CNT 0 +#define CCE_PIO_WR_STALL_CNT 1 +#define CCE_RCV_AVAIL_INT_CNT 3 +#define CCE_RCV_URGENT_INT_CNT 4 +#define CCE_SDMA_INT_CNT 1 +#define CCE_SEND_CREDIT_INT_CNT 5 +#define DCC_CFG_LED_CNTRL (DCC_CSRS + 0x000000000040) +#define DCC_CFG_LED_CNTRL_LED_CNTRL_SMASK 0x10ull +#define DCC_CFG_LED_CNTRL_LED_SW_BLINK_RATE_SHIFT 0 +#define DCC_CFG_LED_CNTRL_LED_SW_BLINK_RATE_SMASK 0xFull +#define DCC_CFG_PORT_CONFIG (DCC_CSRS + 0x000000000008) +#define DCC_CFG_PORT_CONFIG1 (DCC_CSRS + 0x000000000010) +#define DCC_CFG_PORT_CONFIG1_DLID_MASK_MASK 0xFFFFull +#define DCC_CFG_PORT_CONFIG1_DLID_MASK_SHIFT 16 +#define DCC_CFG_PORT_CONFIG1_DLID_MASK_SMASK 0xFFFF0000ull +#define DCC_CFG_PORT_CONFIG1_TARGET_DLID_MASK 0xFFFFull +#define DCC_CFG_PORT_CONFIG1_TARGET_DLID_SHIFT 0 +#define DCC_CFG_PORT_CONFIG1_TARGET_DLID_SMASK 0xFFFFull +#define DCC_CFG_PORT_CONFIG_LINK_STATE_MASK 0x7ull +#define DCC_CFG_PORT_CONFIG_LINK_STATE_SHIFT 48 +#define DCC_CFG_PORT_CONFIG_LINK_STATE_SMASK 0x7000000000000ull +#define DCC_CFG_PORT_CONFIG_MTU_CAP_MASK 0x7ull +#define DCC_CFG_PORT_CONFIG_MTU_CAP_SHIFT 32 +#define DCC_CFG_PORT_CONFIG_MTU_CAP_SMASK 0x700000000ull +#define DCC_CFG_RESET (DCC_CSRS + 0x000000000000) +#define DCC_CFG_RESET_RESET_LCB_SHIFT 0 +#define DCC_CFG_RESET_RESET_RX_FPE_SHIFT 2 +#define DCC_CFG_SC_VL_TABLE_15_0 (DCC_CSRS + 0x000000000028) +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY0_SHIFT 0 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY10_SHIFT 40 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY11_SHIFT 44 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY12_SHIFT 48 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY13_SHIFT 52 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY14_SHIFT 56 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY15_SHIFT 60 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY1_SHIFT 4 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY2_SHIFT 8 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY3_SHIFT 12 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY4_SHIFT 16 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY5_SHIFT 20 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY6_SHIFT 24 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY7_SHIFT 28 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY8_SHIFT 32 +#define DCC_CFG_SC_VL_TABLE_15_0_ENTRY9_SHIFT 36 +#define DCC_CFG_SC_VL_TABLE_31_16 (DCC_CSRS + 0x000000000030) +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY16_SHIFT 0 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY17_SHIFT 4 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY18_SHIFT 8 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY19_SHIFT 12 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY20_SHIFT 16 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY21_SHIFT 20 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY22_SHIFT 24 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY23_SHIFT 28 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY24_SHIFT 32 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY25_SHIFT 36 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY26_SHIFT 40 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY27_SHIFT 44 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY28_SHIFT 48 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY29_SHIFT 52 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY30_SHIFT 56 +#define DCC_CFG_SC_VL_TABLE_31_16_ENTRY31_SHIFT 60 +#define DCC_ERR_DROPPED_PKT_CNT (DCC_CSRS + 0x000000000120) +#define DCC_ERR_FLG (DCC_CSRS + 0x000000000050) +#define DCC_ERR_FLG_BAD_CRDT_ACK_ERR_SMASK 0x4000ull +#define DCC_ERR_FLG_BAD_CTRL_DIST_ERR_SMASK 0x200000ull +#define DCC_ERR_FLG_BAD_CTRL_FLIT_ERR_SMASK 0x10000ull +#define DCC_ERR_FLG_BAD_DLID_TARGET_ERR_SMASK 0x200ull +#define DCC_ERR_FLG_BAD_HEAD_DIST_ERR_SMASK 0x800000ull +#define DCC_ERR_FLG_BAD_L2_ERR_SMASK 0x2ull +#define DCC_ERR_FLG_BAD_LVER_ERR_SMASK 0x400ull +#define DCC_ERR_FLG_BAD_MID_TAIL_ERR_SMASK 0x8ull +#define DCC_ERR_FLG_BAD_PKT_LENGTH_ERR_SMASK 0x4000000ull +#define DCC_ERR_FLG_BAD_PREEMPTION_ERR_SMASK 0x10ull +#define DCC_ERR_FLG_BAD_SC_ERR_SMASK 0x4ull +#define DCC_ERR_FLG_BAD_TAIL_DIST_ERR_SMASK 0x400000ull +#define DCC_ERR_FLG_BAD_VL_MARKER_ERR_SMASK 0x80ull +#define DCC_ERR_FLG_CLR (DCC_CSRS + 0x000000000060) +#define DCC_ERR_FLG_CSR_ACCESS_BLOCKED_HOST_SMASK 0x8000000000ull +#define DCC_ERR_FLG_CSR_ACCESS_BLOCKED_UC_SMASK 0x10000000000ull +#define DCC_ERR_FLG_CSR_INVAL_ADDR_SMASK 0x400000000000ull +#define DCC_ERR_FLG_CSR_PARITY_ERR_SMASK 0x200000000000ull +#define DCC_ERR_FLG_DLID_ZERO_ERR_SMASK 0x40000000ull +#define DCC_ERR_FLG_EN (DCC_CSRS + 0x000000000058) +#define DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_HOST_SMASK 0x8000000000ull +#define DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_UC_SMASK 0x10000000000ull +#define DCC_ERR_FLG_EVENT_CNTR_PARITY_ERR_SMASK 0x20000ull +#define DCC_ERR_FLG_EVENT_CNTR_ROLLOVER_ERR_SMASK 0x40000ull +#define DCC_ERR_FLG_FMCONFIG_ERR_SMASK 0x40000000000000ull +#define DCC_ERR_FLG_FPE_TX_FIFO_OVFLW_ERR_SMASK 0x2000000000ull +#define DCC_ERR_FLG_FPE_TX_FIFO_UNFLW_ERR_SMASK 0x4000000000ull +#define DCC_ERR_FLG_LATE_EBP_ERR_SMASK 0x1000000000ull +#define DCC_ERR_FLG_LATE_LONG_ERR_SMASK 0x800000000ull +#define DCC_ERR_FLG_LATE_SHORT_ERR_SMASK 0x400000000ull +#define DCC_ERR_FLG_LENGTH_MTU_ERR_SMASK 0x80000000ull +#define DCC_ERR_FLG_LINK_ERR_SMASK 0x80000ull +#define DCC_ERR_FLG_MISC_CNTR_ROLLOVER_ERR_SMASK 0x100000ull +#define DCC_ERR_FLG_NONVL15_STATE_ERR_SMASK 0x1000000ull +#define DCC_ERR_FLG_PERM_NVL15_ERR_SMASK 0x10000000ull +#define DCC_ERR_FLG_PREEMPTION_ERR_SMASK 0x20ull +#define DCC_ERR_FLG_PREEMPTIONVL15_ERR_SMASK 0x40ull +#define DCC_ERR_FLG_RCVPORT_ERR_SMASK 0x80000000000000ull +#define DCC_ERR_FLG_RX_BYTE_SHFT_PARITY_ERR_SMASK 0x1000000000000ull +#define DCC_ERR_FLG_RX_CTRL_PARITY_MBE_ERR_SMASK 0x100000000000ull +#define DCC_ERR_FLG_RX_EARLY_DROP_ERR_SMASK 0x200000000ull +#define DCC_ERR_FLG_SLID_ZERO_ERR_SMASK 0x20000000ull +#define DCC_ERR_FLG_TX_BYTE_SHFT_PARITY_ERR_SMASK 0x800000000000ull +#define DCC_ERR_FLG_TX_CTRL_PARITY_ERR_SMASK 0x20000000000ull +#define DCC_ERR_FLG_TX_CTRL_PARITY_MBE_ERR_SMASK 0x40000000000ull +#define DCC_ERR_FLG_TX_SC_PARITY_ERR_SMASK 0x80000000000ull +#define DCC_ERR_FLG_UNCORRECTABLE_ERR_SMASK 0x2000ull +#define DCC_ERR_FLG_UNSUP_PKT_TYPE_SMASK 0x8000ull +#define DCC_ERR_FLG_UNSUP_VL_ERR_SMASK 0x8000000ull +#define DCC_ERR_FLG_VL15_MULTI_ERR_SMASK 0x2000000ull +#define DCC_ERR_FMCONFIG_ERR_CNT (DCC_CSRS + 0x000000000110) +#define DCC_ERR_INFO_FMCONFIG (DCC_CSRS + 0x000000000090) +#define DCC_ERR_INFO_PORTRCV (DCC_CSRS + 0x000000000078) +#define DCC_ERR_INFO_PORTRCV_HDR0 (DCC_CSRS + 0x000000000080) +#define DCC_ERR_INFO_PORTRCV_HDR1 (DCC_CSRS + 0x000000000088) +#define DCC_ERR_INFO_UNCORRECTABLE (DCC_CSRS + 0x000000000098) +#define DCC_ERR_PORTRCV_ERR_CNT (DCC_CSRS + 0x000000000108) +#define DCC_ERR_RCVREMOTE_PHY_ERR_CNT (DCC_CSRS + 0x000000000118) +#define DCC_ERR_UNCORRECTABLE_CNT (DCC_CSRS + 0x000000000100) +#define DCC_PRF_PORT_MARK_FECN_CNT (DCC_CSRS + 0x000000000330) +#define DCC_PRF_PORT_RCV_BECN_CNT (DCC_CSRS + 0x000000000290) +#define DCC_PRF_PORT_RCV_BUBBLE_CNT (DCC_CSRS + 0x0000000002E0) +#define DCC_PRF_PORT_RCV_CORRECTABLE_CNT (DCC_CSRS + 0x000000000140) +#define DCC_PRF_PORT_RCV_DATA_CNT (DCC_CSRS + 0x000000000198) +#define DCC_PRF_PORT_RCV_FECN_CNT (DCC_CSRS + 0x000000000240) +#define DCC_PRF_PORT_RCV_MULTICAST_PKT_CNT (DCC_CSRS + 0x000000000130) +#define DCC_PRF_PORT_RCV_PKTS_CNT (DCC_CSRS + 0x0000000001A8) +#define DCC_PRF_PORT_VL_MARK_FECN_CNT (DCC_CSRS + 0x000000000338) +#define DCC_PRF_PORT_VL_RCV_BECN_CNT (DCC_CSRS + 0x000000000298) +#define DCC_PRF_PORT_VL_RCV_BUBBLE_CNT (DCC_CSRS + 0x0000000002E8) +#define DCC_PRF_PORT_VL_RCV_DATA_CNT (DCC_CSRS + 0x0000000001B0) +#define DCC_PRF_PORT_VL_RCV_FECN_CNT (DCC_CSRS + 0x000000000248) +#define DCC_PRF_PORT_VL_RCV_PKTS_CNT (DCC_CSRS + 0x0000000001F8) +#define DCC_PRF_PORT_XMIT_CORRECTABLE_CNT (DCC_CSRS + 0x000000000138) +#define DCC_PRF_PORT_XMIT_DATA_CNT (DCC_CSRS + 0x000000000190) +#define DCC_PRF_PORT_XMIT_MULTICAST_CNT (DCC_CSRS + 0x000000000128) +#define DCC_PRF_PORT_XMIT_PKTS_CNT (DCC_CSRS + 0x0000000001A0) +#define DCC_PRF_RX_FLOW_CRTL_CNT (DCC_CSRS + 0x000000000180) +#define DCC_PRF_TX_FLOW_CRTL_CNT (DCC_CSRS + 0x000000000188) +#define DC_DC8051_CFG_CSR_ACCESS_SEL (DC_8051_CSRS + 0x000000000110) +#define DC_DC8051_CFG_CSR_ACCESS_SEL_DCC_SMASK 0x2ull +#define DC_DC8051_CFG_CSR_ACCESS_SEL_LCB_SMASK 0x1ull +#define DC_DC8051_CFG_EXT_DEV_0 (DC_8051_CSRS + 0x000000000118) +#define DC_DC8051_CFG_EXT_DEV_0_COMPLETED_SMASK 0x1ull +#define DC_DC8051_CFG_EXT_DEV_0_RETURN_CODE_SHIFT 8 +#define DC_DC8051_CFG_EXT_DEV_0_RSP_DATA_SHIFT 16 +#define DC_DC8051_CFG_EXT_DEV_1 (DC_8051_CSRS + 0x000000000120) +#define DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_MASK 0xFFFFull +#define DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SHIFT 16 +#define DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SMASK 0xFFFF0000ull +#define DC_DC8051_CFG_EXT_DEV_1_REQ_NEW_SMASK 0x1ull +#define DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_MASK 0xFFull +#define DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_SHIFT 8 +#define DC_DC8051_CFG_HOST_CMD_0 (DC_8051_CSRS + 0x000000000028) +#define DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_MASK 0xFFFFFFFFFFFFull +#define DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_SHIFT 16 +#define DC_DC8051_CFG_HOST_CMD_0_REQ_NEW_SMASK 0x1ull +#define DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_MASK 0xFFull +#define DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_SHIFT 8 +#define DC_DC8051_CFG_HOST_CMD_1 (DC_8051_CSRS + 0x000000000030) +#define DC_DC8051_CFG_HOST_CMD_1_COMPLETED_SMASK 0x1ull +#define DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_MASK 0xFFull +#define DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_SHIFT 8 +#define DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_MASK 0xFFFFFFFFFFFFull +#define DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_SHIFT 16 +#define DC_DC8051_CFG_LOCAL_GUID (DC_8051_CSRS + 0x000000000038) +#define DC_DC8051_CFG_MODE (DC_8051_CSRS + 0x000000000070) +#define DC_DC8051_CFG_RAM_ACCESS_CTRL (DC_8051_CSRS + 0x000000000008) +#define DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK 0x7FFFull +#define DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT 0 +#define DC_DC8051_CFG_RAM_ACCESS_CTRL_WRITE_ENA_SMASK 0x1000000ull +#define DC_DC8051_CFG_RAM_ACCESS_CTRL_READ_ENA_SMASK 0x10000ull +#define DC_DC8051_CFG_RAM_ACCESS_SETUP (DC_8051_CSRS + 0x000000000000) +#define DC_DC8051_CFG_RAM_ACCESS_SETUP_AUTO_INCR_ADDR_SMASK 0x100ull +#define DC_DC8051_CFG_RAM_ACCESS_SETUP_RAM_SEL_SMASK 0x1ull +#define DC_DC8051_CFG_RAM_ACCESS_STATUS (DC_8051_CSRS + 0x000000000018) +#define DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK 0x10000ull +#define DC_DC8051_CFG_RAM_ACCESS_WR_DATA (DC_8051_CSRS + 0x000000000010) +#define DC_DC8051_CFG_RAM_ACCESS_RD_DATA (DC_8051_CSRS + 0x000000000020) +#define DC_DC8051_CFG_RST (DC_8051_CSRS + 0x000000000068) +#define DC_DC8051_CFG_RST_CRAM_SMASK 0x2ull +#define DC_DC8051_CFG_RST_DRAM_SMASK 0x4ull +#define DC_DC8051_CFG_RST_IRAM_SMASK 0x8ull +#define DC_DC8051_CFG_RST_M8051W_SMASK 0x1ull +#define DC_DC8051_CFG_RST_SFR_SMASK 0x10ull +#define DC_DC8051_DBG_ERR_INFO_SET_BY_8051 (DC_8051_CSRS + 0x0000000000D8) +#define DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_MASK 0xFFFFFFFFull +#define DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_SHIFT 16 +#define DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_MASK 0xFFFFull +#define DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_SHIFT 0 +#define DC_DC8051_ERR_CLR (DC_8051_CSRS + 0x0000000000E8) +#define DC_DC8051_ERR_EN (DC_8051_CSRS + 0x0000000000F0) +#define DC_DC8051_ERR_EN_LOST_8051_HEART_BEAT_SMASK 0x2ull +#define DC_DC8051_ERR_FLG (DC_8051_CSRS + 0x0000000000E0) +#define DC_DC8051_ERR_FLG_CRAM_MBE_SMASK 0x4ull +#define DC_DC8051_ERR_FLG_CRAM_SBE_SMASK 0x8ull +#define DC_DC8051_ERR_FLG_DRAM_MBE_SMASK 0x10ull +#define DC_DC8051_ERR_FLG_DRAM_SBE_SMASK 0x20ull +#define DC_DC8051_ERR_FLG_INVALID_CSR_ADDR_SMASK 0x400ull +#define DC_DC8051_ERR_FLG_IRAM_MBE_SMASK 0x40ull +#define DC_DC8051_ERR_FLG_IRAM_SBE_SMASK 0x80ull +#define DC_DC8051_ERR_FLG_LOST_8051_HEART_BEAT_SMASK 0x2ull +#define DC_DC8051_ERR_FLG_SET_BY_8051_SMASK 0x1ull +#define DC_DC8051_ERR_FLG_UNMATCHED_SECURE_MSG_ACROSS_BCC_LANES_SMASK 0x100ull +#define DC_DC8051_STS_CUR_STATE (DC_8051_CSRS + 0x000000000060) +#define DC_DC8051_STS_CUR_STATE_FIRMWARE_MASK 0xFFull +#define DC_DC8051_STS_CUR_STATE_FIRMWARE_SHIFT 16 +#define DC_DC8051_STS_CUR_STATE_PORT_MASK 0xFFull +#define DC_DC8051_STS_CUR_STATE_PORT_SHIFT 0 +#define DC_DC8051_STS_LOCAL_FM_SECURITY (DC_8051_CSRS + 0x000000000050) +#define DC_DC8051_STS_LOCAL_FM_SECURITY_DISABLED_MASK 0x1ull +#define DC_DC8051_STS_REMOTE_FM_SECURITY (DC_8051_CSRS + 0x000000000058) +#define DC_DC8051_STS_REMOTE_GUID (DC_8051_CSRS + 0x000000000040) +#define DC_DC8051_STS_REMOTE_NODE_TYPE (DC_8051_CSRS + 0x000000000048) +#define DC_DC8051_STS_REMOTE_NODE_TYPE_VAL_MASK 0x3ull +#define DC_DC8051_STS_REMOTE_PORT_NO (DC_8051_CSRS + 0x000000000130) +#define DC_DC8051_STS_REMOTE_PORT_NO_VAL_SMASK 0xFFull +#define DC_LCB_CFG_ALLOW_LINK_UP (DC_LCB_CSRS + 0x000000000128) +#define DC_LCB_CFG_ALLOW_LINK_UP_VAL_SHIFT 0 +#define DC_LCB_CFG_CRC_MODE (DC_LCB_CSRS + 0x000000000058) +#define DC_LCB_CFG_CRC_MODE_TX_VAL_SHIFT 0 +#define DC_LCB_CFG_IGNORE_LOST_RCLK (DC_LCB_CSRS + 0x000000000020) +#define DC_LCB_CFG_IGNORE_LOST_RCLK_EN_SMASK 0x1ull +#define DC_LCB_CFG_LANE_WIDTH (DC_LCB_CSRS + 0x000000000100) +#define DC_LCB_CFG_LINK_KILL_EN (DC_LCB_CSRS + 0x000000000120) +#define DC_LCB_CFG_LINK_KILL_EN_FLIT_INPUT_BUF_MBE_SMASK 0x100000ull +#define DC_LCB_CFG_LINK_KILL_EN_REPLAY_BUF_MBE_SMASK 0x400000ull +#define DC_LCB_CFG_LN_DCLK (DC_LCB_CSRS + 0x000000000060) +#define DC_LCB_CFG_LOOPBACK (DC_LCB_CSRS + 0x0000000000F8) +#define DC_LCB_CFG_LOOPBACK_VAL_SHIFT 0 +#define DC_LCB_CFG_RUN (DC_LCB_CSRS + 0x000000000000) +#define DC_LCB_CFG_RUN_EN_SHIFT 0 +#define DC_LCB_CFG_RX_FIFOS_RADR (DC_LCB_CSRS + 0x000000000018) +#define DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT 8 +#define DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT 4 +#define DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT 0 +#define DC_LCB_CFG_TX_FIFOS_RADR (DC_LCB_CSRS + 0x000000000010) +#define DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT 0 +#define DC_LCB_CFG_TX_FIFOS_RESET (DC_LCB_CSRS + 0x000000000008) +#define DC_LCB_CFG_TX_FIFOS_RESET_VAL_SHIFT 0 +#define DC_LCB_ERR_CLR (DC_LCB_CSRS + 0x000000000308) +#define DC_LCB_ERR_EN (DC_LCB_CSRS + 0x000000000310) +#define DC_LCB_ERR_FLG (DC_LCB_CSRS + 0x000000000300) +#define DC_LCB_ERR_FLG_REDUNDANT_FLIT_PARITY_ERR_SMASK 0x20000000ull +#define DC_LCB_ERR_FLG_NEG_EDGE_LINK_TRANSFER_ACTIVE_SMASK 0x10000000ull +#define DC_LCB_ERR_FLG_HOLD_REINIT_SMASK 0x8000000ull +#define DC_LCB_ERR_FLG_RST_FOR_INCOMPLT_RND_TRIP_SMASK 0x4000000ull +#define DC_LCB_ERR_FLG_RST_FOR_LINK_TIMEOUT_SMASK 0x2000000ull +#define DC_LCB_ERR_FLG_CREDIT_RETURN_FLIT_MBE_SMASK 0x1000000ull +#define DC_LCB_ERR_FLG_REPLAY_BUF_SBE_SMASK 0x800000ull +#define DC_LCB_ERR_FLG_REPLAY_BUF_MBE_SMASK 0x400000ull +#define DC_LCB_ERR_FLG_FLIT_INPUT_BUF_SBE_SMASK 0x200000ull +#define DC_LCB_ERR_FLG_FLIT_INPUT_BUF_MBE_SMASK 0x100000ull +#define DC_LCB_ERR_FLG_VL_ACK_INPUT_WRONG_CRC_MODE_SMASK 0x80000ull +#define DC_LCB_ERR_FLG_VL_ACK_INPUT_PARITY_ERR_SMASK 0x40000ull +#define DC_LCB_ERR_FLG_VL_ACK_INPUT_BUF_OFLW_SMASK 0x20000ull +#define DC_LCB_ERR_FLG_FLIT_INPUT_BUF_OFLW_SMASK 0x10000ull +#define DC_LCB_ERR_FLG_ILLEGAL_FLIT_ENCODING_SMASK 0x8000ull +#define DC_LCB_ERR_FLG_ILLEGAL_NULL_LTP_SMASK 0x4000ull +#define DC_LCB_ERR_FLG_UNEXPECTED_ROUND_TRIP_MARKER_SMASK 0x2000ull +#define DC_LCB_ERR_FLG_UNEXPECTED_REPLAY_MARKER_SMASK 0x1000ull +#define DC_LCB_ERR_FLG_RCLK_STOPPED_SMASK 0x800ull +#define DC_LCB_ERR_FLG_CRC_ERR_CNT_HIT_LIMIT_SMASK 0x400ull +#define DC_LCB_ERR_FLG_REINIT_FOR_LN_DEGRADE_SMASK 0x200ull +#define DC_LCB_ERR_FLG_REINIT_FROM_PEER_SMASK 0x100ull +#define DC_LCB_ERR_FLG_SEQ_CRC_ERR_SMASK 0x80ull +#define DC_LCB_ERR_FLG_RX_LESS_THAN_FOUR_LNS_SMASK 0x40ull +#define DC_LCB_ERR_FLG_TX_LESS_THAN_FOUR_LNS_SMASK 0x20ull +#define DC_LCB_ERR_FLG_LOST_REINIT_STALL_OR_TOS_SMASK 0x10ull +#define DC_LCB_ERR_FLG_ALL_LNS_FAILED_REINIT_TEST_SMASK 0x8ull +#define DC_LCB_ERR_FLG_RST_FOR_FAILED_DESKEW_SMASK 0x4ull +#define DC_LCB_ERR_FLG_INVALID_CSR_ADDR_SMASK 0x2ull +#define DC_LCB_ERR_FLG_CSR_PARITY_ERR_SMASK 0x1ull +#define DC_LCB_ERR_INFO_CRC_ERR_LN0 (DC_LCB_CSRS + 0x000000000328) +#define DC_LCB_ERR_INFO_CRC_ERR_LN1 (DC_LCB_CSRS + 0x000000000330) +#define DC_LCB_ERR_INFO_CRC_ERR_LN2 (DC_LCB_CSRS + 0x000000000338) +#define DC_LCB_ERR_INFO_CRC_ERR_LN3 (DC_LCB_CSRS + 0x000000000340) +#define DC_LCB_ERR_INFO_CRC_ERR_MULTI_LN (DC_LCB_CSRS + 0x000000000348) +#define DC_LCB_ERR_INFO_ESCAPE_0_ONLY_CNT (DC_LCB_CSRS + 0x000000000368) +#define DC_LCB_ERR_INFO_ESCAPE_0_PLUS1_CNT (DC_LCB_CSRS + 0x000000000370) +#define DC_LCB_ERR_INFO_ESCAPE_0_PLUS2_CNT (DC_LCB_CSRS + 0x000000000378) +#define DC_LCB_ERR_INFO_MISC_FLG_CNT (DC_LCB_CSRS + 0x000000000390) +#define DC_LCB_ERR_INFO_REINIT_FROM_PEER_CNT (DC_LCB_CSRS + 0x000000000380) +#define DC_LCB_ERR_INFO_RX_REPLAY_CNT (DC_LCB_CSRS + 0x000000000358) +#define DC_LCB_ERR_INFO_SBE_CNT (DC_LCB_CSRS + 0x000000000388) +#define DC_LCB_ERR_INFO_SEQ_CRC_CNT (DC_LCB_CSRS + 0x000000000360) +#define DC_LCB_ERR_INFO_TOTAL_CRC_ERR (DC_LCB_CSRS + 0x000000000320) +#define DC_LCB_ERR_INFO_TX_REPLAY_CNT (DC_LCB_CSRS + 0x000000000350) +#define DC_LCB_PG_DBG_FLIT_CRDTS_CNT (DC_LCB_CSRS + 0x000000000580) +#define DC_LCB_PG_STS_PAUSE_COMPLETE_CNT (DC_LCB_CSRS + 0x0000000005F8) +#define DC_LCB_PG_STS_TX_MBE_CNT (DC_LCB_CSRS + 0x000000000608) +#define DC_LCB_PG_STS_TX_SBE_CNT (DC_LCB_CSRS + 0x000000000600) +#define DC_LCB_PRF_ACCEPTED_LTP_CNT (DC_LCB_CSRS + 0x000000000408) +#define DC_LCB_PRF_CLK_CNTR (DC_LCB_CSRS + 0x000000000420) +#define DC_LCB_PRF_GOOD_LTP_CNT (DC_LCB_CSRS + 0x000000000400) +#define DC_LCB_PRF_RX_FLIT_CNT (DC_LCB_CSRS + 0x000000000410) +#define DC_LCB_PRF_TX_FLIT_CNT (DC_LCB_CSRS + 0x000000000418) +#define DC_LCB_STS_LINK_TRANSFER_ACTIVE (DC_LCB_CSRS + 0x000000000468) +#define DC_LCB_STS_ROUND_TRIP_LTP_CNT (DC_LCB_CSRS + 0x0000000004B0) +#define RCV_BUF_OVFL_CNT 10 +#define RCV_CONTEXT_EGR_STALL 22 +#define RCV_CONTEXT_RHQ_STALL 21 +#define RCV_DATA_PKT_CNT 0 +#define RCV_DWORD_CNT 1 +#define RCV_TID_FLOW_GEN_MISMATCH_CNT 20 +#define RCV_TID_FLOW_SEQ_MISMATCH_CNT 23 +#define RCV_TID_FULL_ERR_CNT 18 +#define RCV_TID_VALID_ERR_CNT 19 +#define RXE_NUM_32_BIT_COUNTERS 24 +#define RXE_NUM_64_BIT_COUNTERS 2 +#define RXE_NUM_RSM_INSTANCES 4 +#define RXE_NUM_TID_FLOWS 32 +#define RXE_PER_CONTEXT_OFFSET 0x0300000 +#define SEND_DATA_PKT_CNT 0 +#define SEND_DATA_PKT_VL0_CNT 12 +#define SEND_DATA_VL0_CNT 3 +#define SEND_DROPPED_PKT_CNT 5 +#define SEND_DWORD_CNT 1 +#define SEND_FLOW_STALL_CNT 4 +#define SEND_HEADERS_ERR_CNT 6 +#define SEND_LEN_ERR_CNT 1 +#define SEND_MAX_MIN_LEN_ERR_CNT 2 +#define SEND_UNDERRUN_CNT 3 +#define SEND_UNSUP_VL_ERR_CNT 0 +#define SEND_WAIT_CNT 2 +#define SEND_WAIT_VL0_CNT 21 +#define TXE_PIO_SEND_OFFSET 0x0800000 +#define ASIC_CFG_DRV_STR (ASIC + 0x000000000048) +#define ASIC_CFG_MUTEX (ASIC + 0x000000000040) +#define ASIC_CFG_SBUS_EXECUTE (ASIC + 0x000000000008) +#define ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK 0x1ull +#define ASIC_CFG_SBUS_EXECUTE_FAST_MODE_SMASK 0x2ull +#define ASIC_CFG_SBUS_REQUEST (ASIC + 0x000000000000) +#define ASIC_CFG_SBUS_REQUEST_COMMAND_SHIFT 16 +#define ASIC_CFG_SBUS_REQUEST_DATA_ADDR_SHIFT 8 +#define ASIC_CFG_SBUS_REQUEST_DATA_IN_SHIFT 32 +#define ASIC_CFG_SBUS_REQUEST_RECEIVER_ADDR_SHIFT 0 +#define ASIC_CFG_SCRATCH (ASIC + 0x000000000020) +#define ASIC_CFG_THERM_POLL_EN (ASIC + 0x000000000050) +#define ASIC_EEP_ADDR_CMD (ASIC + 0x000000000308) +#define ASIC_EEP_ADDR_CMD_EP_ADDR_MASK 0xFFFFFFull +#define ASIC_EEP_CTL_STAT (ASIC + 0x000000000300) +#define ASIC_EEP_CTL_STAT_EP_RESET_SMASK 0x4ull +#define ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT 8 +#define ASIC_EEP_CTL_STAT_RESETCSR 0x0000000083818000ull +#define ASIC_EEP_DATA (ASIC + 0x000000000310) +#define ASIC_GPIO_CLEAR (ASIC + 0x000000000230) +#define ASIC_GPIO_FORCE (ASIC + 0x000000000238) +#define ASIC_GPIO_IN (ASIC + 0x000000000200) +#define ASIC_GPIO_INVERT (ASIC + 0x000000000210) +#define ASIC_GPIO_MASK (ASIC + 0x000000000220) +#define ASIC_GPIO_OE (ASIC + 0x000000000208) +#define ASIC_GPIO_OUT (ASIC + 0x000000000218) +#define ASIC_PCIE_SD_HOST_CMD (ASIC + 0x000000000100) +#define ASIC_PCIE_SD_HOST_CMD_INTRPT_CMD_SHIFT 0 +#define ASIC_PCIE_SD_HOST_CMD_SBR_MODE_SMASK 0x400ull +#define ASIC_PCIE_SD_HOST_CMD_SBUS_RCVR_ADDR_SHIFT 2 +#define ASIC_PCIE_SD_HOST_CMD_TIMER_MASK 0xFFFFFull +#define ASIC_PCIE_SD_HOST_CMD_TIMER_SHIFT 12 +#define ASIC_PCIE_SD_HOST_STATUS (ASIC + 0x000000000108) +#define ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_MASK 0x7ull +#define ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_SHIFT 2 +#define ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_MASK 0x3ull +#define ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_SHIFT 0 +#define ASIC_PCIE_SD_INTRPT_DATA_CODE (ASIC + 0x000000000110) +#define ASIC_PCIE_SD_INTRPT_ENABLE (ASIC + 0x000000000118) +#define ASIC_PCIE_SD_INTRPT_LIST (ASIC + 0x000000000180) +#define ASIC_PCIE_SD_INTRPT_LIST_INTRPT_CODE_SHIFT 16 +#define ASIC_PCIE_SD_INTRPT_LIST_INTRPT_DATA_SHIFT 0 +#define ASIC_PCIE_SD_INTRPT_STATUS (ASIC + 0x000000000128) +#define ASIC_QSFP1_CLEAR (ASIC + 0x000000000270) +#define ASIC_QSFP1_FORCE (ASIC + 0x000000000278) +#define ASIC_QSFP1_IN (ASIC + 0x000000000240) +#define ASIC_QSFP1_INVERT (ASIC + 0x000000000250) +#define ASIC_QSFP1_MASK (ASIC + 0x000000000260) +#define ASIC_QSFP1_OE (ASIC + 0x000000000248) +#define ASIC_QSFP1_OUT (ASIC + 0x000000000258) +#define ASIC_QSFP1_STATUS (ASIC + 0x000000000268) +#define ASIC_QSFP2_CLEAR (ASIC + 0x0000000002B0) +#define ASIC_QSFP2_FORCE (ASIC + 0x0000000002B8) +#define ASIC_QSFP2_IN (ASIC + 0x000000000280) +#define ASIC_QSFP2_INVERT (ASIC + 0x000000000290) +#define ASIC_QSFP2_MASK (ASIC + 0x0000000002A0) +#define ASIC_QSFP2_OE (ASIC + 0x000000000288) +#define ASIC_QSFP2_OUT (ASIC + 0x000000000298) +#define ASIC_QSFP2_STATUS (ASIC + 0x0000000002A8) +#define ASIC_STS_SBUS_COUNTERS (ASIC + 0x000000000018) +#define ASIC_STS_SBUS_COUNTERS_EXECUTE_CNT_MASK 0xFFFFull +#define ASIC_STS_SBUS_COUNTERS_EXECUTE_CNT_SHIFT 0 +#define ASIC_STS_SBUS_COUNTERS_RCV_DATA_VALID_CNT_MASK 0xFFFFull +#define ASIC_STS_SBUS_COUNTERS_RCV_DATA_VALID_CNT_SHIFT 16 +#define ASIC_STS_SBUS_RESULT (ASIC + 0x000000000010) +#define ASIC_STS_SBUS_RESULT_DONE_SMASK 0x1ull +#define ASIC_STS_SBUS_RESULT_RCV_DATA_VALID_SMASK 0x2ull +#define ASIC_STS_THERM (ASIC + 0x000000000058) +#define ASIC_STS_THERM_CRIT_TEMP_MASK 0x7FFull +#define ASIC_STS_THERM_CRIT_TEMP_SHIFT 18 +#define ASIC_STS_THERM_CURR_TEMP_MASK 0x7FFull +#define ASIC_STS_THERM_CURR_TEMP_SHIFT 2 +#define ASIC_STS_THERM_HI_TEMP_MASK 0x7FFull +#define ASIC_STS_THERM_HI_TEMP_SHIFT 50 +#define ASIC_STS_THERM_LO_TEMP_MASK 0x7FFull +#define ASIC_STS_THERM_LO_TEMP_SHIFT 34 +#define ASIC_STS_THERM_LOW_SHIFT 13 +#define CCE_COUNTER_ARRAY32 (CCE + 0x000000000060) +#define CCE_CTRL (CCE + 0x000000000010) +#define CCE_CTRL_RXE_RESUME_SMASK 0x800ull +#define CCE_CTRL_SPC_FREEZE_SMASK 0x100ull +#define CCE_CTRL_SPC_UNFREEZE_SMASK 0x200ull +#define CCE_CTRL_TXE_RESUME_SMASK 0x2000ull +#define CCE_DC_CTRL (CCE + 0x0000000000B8) +#define CCE_DC_CTRL_DC_RESET_SMASK 0x1ull +#define CCE_DC_CTRL_RESETCSR 0x0000000000000001ull +#define CCE_ERR_CLEAR (CCE + 0x000000000050) +#define CCE_ERR_MASK (CCE + 0x000000000048) +#define CCE_ERR_STATUS (CCE + 0x000000000040) +#define CCE_ERR_STATUS_CCE_CLI0_ASYNC_FIFO_PARITY_ERR_SMASK 0x40ull +#define CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_DBG_PARITY_ERROR_SMASK 0x1000ull +#define CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_PIO_CRDT_PARITY_ERR_SMASK \ + 0x200ull +#define CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_RXDMA_PARITY_ERROR_SMASK \ + 0x800ull +#define CCE_ERR_STATUS_CCE_CLI1_ASYNC_FIFO_SDMA_HD_PARITY_ERR_SMASK \ + 0x400ull +#define CCE_ERR_STATUS_CCE_CLI2_ASYNC_FIFO_PARITY_ERR_SMASK 0x100ull +#define CCE_ERR_STATUS_CCE_CSR_CFG_BUS_PARITY_ERR_SMASK 0x80ull +#define CCE_ERR_STATUS_CCE_CSR_PARITY_ERR_SMASK 0x1ull +#define CCE_ERR_STATUS_CCE_CSR_READ_BAD_ADDR_ERR_SMASK 0x2ull +#define CCE_ERR_STATUS_CCE_CSR_WRITE_BAD_ADDR_ERR_SMASK 0x4ull +#define CCE_ERR_STATUS_CCE_INT_MAP_COR_ERR_SMASK 0x4000000000ull +#define CCE_ERR_STATUS_CCE_INT_MAP_UNC_ERR_SMASK 0x8000000000ull +#define CCE_ERR_STATUS_CCE_MSIX_CSR_PARITY_ERR_SMASK 0x10000000000ull +#define CCE_ERR_STATUS_CCE_MSIX_TABLE_COR_ERR_SMASK 0x1000000000ull +#define CCE_ERR_STATUS_CCE_MSIX_TABLE_UNC_ERR_SMASK 0x2000000000ull +#define CCE_ERR_STATUS_CCE_RCPL_ASYNC_FIFO_PARITY_ERR_SMASK 0x400000000ull +#define CCE_ERR_STATUS_CCE_RSPD_DATA_PARITY_ERR_SMASK 0x20ull +#define CCE_ERR_STATUS_CCE_RXDMA_CONV_FIFO_PARITY_ERR_SMASK 0x800000000ull +#define CCE_ERR_STATUS_CCE_SEG_READ_BAD_ADDR_ERR_SMASK 0x100000000ull +#define CCE_ERR_STATUS_CCE_SEG_WRITE_BAD_ADDR_ERR_SMASK 0x200000000ull +#define CCE_ERR_STATUS_CCE_TRGT_ACCESS_ERR_SMASK 0x10ull +#define CCE_ERR_STATUS_CCE_TRGT_ASYNC_FIFO_PARITY_ERR_SMASK 0x8ull +#define CCE_ERR_STATUS_CCE_TRGT_CPL_TIMEOUT_ERR_SMASK 0x40000000ull +#define CCE_ERR_STATUS_LA_TRIGGERED_SMASK 0x80000000ull +#define CCE_ERR_STATUS_PCIC_CPL_DAT_QCOR_ERR_SMASK 0x40000ull +#define CCE_ERR_STATUS_PCIC_CPL_DAT_QUNC_ERR_SMASK 0x4000000ull +#define CCE_ERR_STATUS_PCIC_CPL_HD_QCOR_ERR_SMASK 0x20000ull +#define CCE_ERR_STATUS_PCIC_CPL_HD_QUNC_ERR_SMASK 0x2000000ull +#define CCE_ERR_STATUS_PCIC_NPOST_DAT_QPARITY_ERR_SMASK 0x100000ull +#define CCE_ERR_STATUS_PCIC_NPOST_HQ_PARITY_ERR_SMASK 0x80000ull +#define CCE_ERR_STATUS_PCIC_POST_DAT_QCOR_ERR_SMASK 0x10000ull +#define CCE_ERR_STATUS_PCIC_POST_DAT_QUNC_ERR_SMASK 0x1000000ull +#define CCE_ERR_STATUS_PCIC_POST_HD_QCOR_ERR_SMASK 0x8000ull +#define CCE_ERR_STATUS_PCIC_POST_HD_QUNC_ERR_SMASK 0x800000ull +#define CCE_ERR_STATUS_PCIC_RECEIVE_PARITY_ERR_SMASK 0x20000000ull +#define CCE_ERR_STATUS_PCIC_RETRY_MEM_COR_ERR_SMASK 0x2000ull +#define CCE_ERR_STATUS_PCIC_RETRY_MEM_UNC_ERR_SMASK 0x200000ull +#define CCE_ERR_STATUS_PCIC_RETRY_SOT_MEM_COR_ERR_SMASK 0x4000ull +#define CCE_ERR_STATUS_PCIC_RETRY_SOT_MEM_UNC_ERR_SMASK 0x400000ull +#define CCE_ERR_STATUS_PCIC_TRANSMIT_BACK_PARITY_ERR_SMASK 0x10000000ull +#define CCE_ERR_STATUS_PCIC_TRANSMIT_FRONT_PARITY_ERR_SMASK 0x8000000ull +#define CCE_INT_CLEAR (CCE + 0x000000110A00) +#define CCE_INT_COUNTER_ARRAY32 (CCE + 0x000000110D00) +#define CCE_INT_FORCE (CCE + 0x000000110B00) +#define CCE_INT_MAP (CCE + 0x000000110500) +#define CCE_INT_MASK (CCE + 0x000000110900) +#define CCE_INT_STATUS (CCE + 0x000000110800) +#define CCE_MSIX_INT_GRANTED (CCE + 0x000000110200) +#define CCE_MSIX_TABLE_LOWER (CCE + 0x000000100000) +#define CCE_MSIX_TABLE_UPPER (CCE + 0x000000100008) +#define CCE_MSIX_TABLE_UPPER_RESETCSR 0x0000000100000000ull +#define CCE_MSIX_VEC_CLR_WITHOUT_INT (CCE + 0x000000110400) +#define CCE_REVISION (CCE + 0x000000000000) +#define CCE_REVISION2 (CCE + 0x000000000008) +#define CCE_REVISION2_HFI_ID_MASK 0x1ull +#define CCE_REVISION2_HFI_ID_SHIFT 0 +#define CCE_REVISION2_IMPL_CODE_SHIFT 8 +#define CCE_REVISION2_IMPL_REVISION_SHIFT 16 +#define CCE_REVISION_BOARD_ID_LOWER_NIBBLE_MASK 0xFull +#define CCE_REVISION_BOARD_ID_LOWER_NIBBLE_SHIFT 32 +#define CCE_REVISION_CHIP_REV_MAJOR_MASK 0xFFull +#define CCE_REVISION_CHIP_REV_MAJOR_SHIFT 8 +#define CCE_REVISION_CHIP_REV_MINOR_MASK 0xFFull +#define CCE_REVISION_CHIP_REV_MINOR_SHIFT 0 +#define CCE_REVISION_SW_MASK 0xFFull +#define CCE_REVISION_SW_SHIFT 24 +#define CCE_SCRATCH (CCE + 0x000000000020) +#define CCE_STATUS (CCE + 0x000000000018) +#define CCE_STATUS_RXE_FROZE_SMASK 0x2ull +#define CCE_STATUS_RXE_PAUSED_SMASK 0x20ull +#define CCE_STATUS_SDMA_FROZE_SMASK 0x1ull +#define CCE_STATUS_SDMA_PAUSED_SMASK 0x10ull +#define CCE_STATUS_TXE_FROZE_SMASK 0x4ull +#define CCE_STATUS_TXE_PAUSED_SMASK 0x40ull +#define CCE_STATUS_TXE_PIO_FROZE_SMASK 0x8ull +#define CCE_STATUS_TXE_PIO_PAUSED_SMASK 0x80ull +#define MISC_CFG_FW_CTRL (MISC + 0x000000001000) +#define MISC_CFG_FW_CTRL_FW_8051_LOADED_SMASK 0x2ull +#define MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT 2 +#define MISC_CFG_FW_CTRL_RSA_STATUS_SMASK 0xCull +#define MISC_CFG_RSA_CMD (MISC + 0x000000000A08) +#define MISC_CFG_RSA_MODULUS (MISC + 0x000000000400) +#define MISC_CFG_RSA_MU (MISC + 0x000000000A10) +#define MISC_CFG_RSA_R2 (MISC + 0x000000000000) +#define MISC_CFG_RSA_SIGNATURE (MISC + 0x000000000200) +#define MISC_CFG_SHA_PRELOAD (MISC + 0x000000000A00) +#define MISC_ERR_CLEAR (MISC + 0x000000002010) +#define MISC_ERR_MASK (MISC + 0x000000002008) +#define MISC_ERR_STATUS (MISC + 0x000000002000) +#define MISC_ERR_STATUS_MISC_PLL_LOCK_FAIL_ERR_SMASK 0x1000ull +#define MISC_ERR_STATUS_MISC_MBIST_FAIL_ERR_SMASK 0x800ull +#define MISC_ERR_STATUS_MISC_INVALID_EEP_CMD_ERR_SMASK 0x400ull +#define MISC_ERR_STATUS_MISC_EFUSE_DONE_PARITY_ERR_SMASK 0x200ull +#define MISC_ERR_STATUS_MISC_EFUSE_WRITE_ERR_SMASK 0x100ull +#define MISC_ERR_STATUS_MISC_EFUSE_READ_BAD_ADDR_ERR_SMASK 0x80ull +#define MISC_ERR_STATUS_MISC_EFUSE_CSR_PARITY_ERR_SMASK 0x40ull +#define MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK 0x20ull +#define MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK 0x10ull +#define MISC_ERR_STATUS_MISC_SBUS_WRITE_FAILED_ERR_SMASK 0x8ull +#define MISC_ERR_STATUS_MISC_CSR_WRITE_BAD_ADDR_ERR_SMASK 0x4ull +#define MISC_ERR_STATUS_MISC_CSR_READ_BAD_ADDR_ERR_SMASK 0x2ull +#define MISC_ERR_STATUS_MISC_CSR_PARITY_ERR_SMASK 0x1ull +#define PCI_CFG_MSIX0 (PCIE + 0x0000000000B0) +#define PCI_CFG_REG1 (PCIE + 0x000000000004) +#define PCI_CFG_REG11 (PCIE + 0x00000000002C) +#define PCIE_CFG_SPCIE1 (PCIE + 0x00000000014C) +#define PCIE_CFG_SPCIE2 (PCIE + 0x000000000150) +#define PCIE_CFG_TPH2 (PCIE + 0x000000000180) +#define RCV_ARRAY (RXE + 0x000000200000) +#define RCV_ARRAY_CNT (RXE + 0x000000000018) +#define RCV_ARRAY_RT_ADDR_MASK 0xFFFFFFFFFull +#define RCV_ARRAY_RT_ADDR_SHIFT 0 +#define RCV_ARRAY_RT_BUF_SIZE_SHIFT 36 +#define RCV_ARRAY_RT_WRITE_ENABLE_SMASK 0x8000000000000000ull +#define RCV_AVAIL_TIME_OUT (RXE + 0x000000100050) +#define RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_MASK 0xFFull +#define RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_SHIFT 0 +#define RCV_BTH_QP (RXE + 0x000000000028) +#define RCV_BTH_QP_KDETH_QP_MASK 0xFFull +#define RCV_BTH_QP_KDETH_QP_SHIFT 16 +#define RCV_BYPASS (RXE + 0x000000000038) +#define RCV_CONTEXTS (RXE + 0x000000000010) +#define RCV_COUNTER_ARRAY32 (RXE + 0x000000000400) +#define RCV_COUNTER_ARRAY64 (RXE + 0x000000000500) +#define RCV_CTRL (RXE + 0x000000000000) +#define RCV_CTRL_RCV_BYPASS_ENABLE_SMASK 0x10ull +#define RCV_CTRL_RCV_EXTENDED_PSN_ENABLE_SMASK 0x40ull +#define RCV_CTRL_RCV_PARTITION_KEY_ENABLE_SMASK 0x4ull +#define RCV_CTRL_RCV_PORT_ENABLE_SMASK 0x1ull +#define RCV_CTRL_RCV_QP_MAP_ENABLE_SMASK 0x2ull +#define RCV_CTRL_RCV_RSM_ENABLE_SMASK 0x20ull +#define RCV_CTRL_RX_RBUF_INIT_SMASK 0x200ull +#define RCV_CTXT_CTRL (RXE + 0x000000100000) +#define RCV_CTXT_CTRL_DONT_DROP_EGR_FULL_SMASK 0x4ull +#define RCV_CTXT_CTRL_DONT_DROP_RHQ_FULL_SMASK 0x8ull +#define RCV_CTXT_CTRL_EGR_BUF_SIZE_MASK 0x7ull +#define RCV_CTXT_CTRL_EGR_BUF_SIZE_SHIFT 8 +#define RCV_CTXT_CTRL_EGR_BUF_SIZE_SMASK 0x700ull +#define RCV_CTXT_CTRL_ENABLE_SMASK 0x1ull +#define RCV_CTXT_CTRL_INTR_AVAIL_SMASK 0x20ull +#define RCV_CTXT_CTRL_ONE_PACKET_PER_EGR_BUFFER_SMASK 0x2ull +#define RCV_CTXT_CTRL_TAIL_UPD_SMASK 0x40ull +#define RCV_CTXT_CTRL_TID_FLOW_ENABLE_SMASK 0x10ull +#define RCV_CTXT_STATUS (RXE + 0x000000100008) +#define RCV_EGR_CTRL (RXE + 0x000000100010) +#define RCV_EGR_CTRL_EGR_BASE_INDEX_MASK 0x1FFFull +#define RCV_EGR_CTRL_EGR_BASE_INDEX_SHIFT 0 +#define RCV_EGR_CTRL_EGR_CNT_MASK 0x1FFull +#define RCV_EGR_CTRL_EGR_CNT_SHIFT 32 +#define RCV_EGR_INDEX_HEAD (RXE + 0x000000300018) +#define RCV_EGR_INDEX_HEAD_HEAD_MASK 0x7FFull +#define RCV_EGR_INDEX_HEAD_HEAD_SHIFT 0 +#define RCV_ERR_CLEAR (RXE + 0x000000000070) +#define RCV_ERR_INFO (RXE + 0x000000000050) +#define RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SC_SMASK 0x1Full +#define RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK 0x20ull +#define RCV_ERR_MASK (RXE + 0x000000000068) +#define RCV_ERR_STATUS (RXE + 0x000000000060) +#define RCV_ERR_STATUS_RX_CSR_PARITY_ERR_SMASK 0x8000000000000000ull +#define RCV_ERR_STATUS_RX_CSR_READ_BAD_ADDR_ERR_SMASK 0x2000000000000000ull +#define RCV_ERR_STATUS_RX_CSR_WRITE_BAD_ADDR_ERR_SMASK \ + 0x4000000000000000ull +#define RCV_ERR_STATUS_RX_DC_INTF_PARITY_ERR_SMASK 0x2ull +#define RCV_ERR_STATUS_RX_DC_SOP_EOP_PARITY_ERR_SMASK 0x200ull +#define RCV_ERR_STATUS_RX_DMA_CSR_COR_ERR_SMASK 0x1ull +#define RCV_ERR_STATUS_RX_DMA_CSR_PARITY_ERR_SMASK 0x200000000000000ull +#define RCV_ERR_STATUS_RX_DMA_CSR_UNC_ERR_SMASK 0x1000000000000000ull +#define RCV_ERR_STATUS_RX_DMA_DATA_FIFO_RD_COR_ERR_SMASK \ + 0x40000000000000ull +#define RCV_ERR_STATUS_RX_DMA_DATA_FIFO_RD_UNC_ERR_SMASK \ + 0x20000000000000ull +#define RCV_ERR_STATUS_RX_DMA_DQ_FSM_ENCODING_ERR_SMASK \ + 0x800000000000000ull +#define RCV_ERR_STATUS_RX_DMA_EQ_FSM_ENCODING_ERR_SMASK \ + 0x400000000000000ull +#define RCV_ERR_STATUS_RX_DMA_FLAG_COR_ERR_SMASK 0x800ull +#define RCV_ERR_STATUS_RX_DMA_FLAG_UNC_ERR_SMASK 0x400ull +#define RCV_ERR_STATUS_RX_DMA_HDR_FIFO_RD_COR_ERR_SMASK 0x10000000000000ull +#define RCV_ERR_STATUS_RX_DMA_HDR_FIFO_RD_UNC_ERR_SMASK 0x8000000000000ull +#define RCV_ERR_STATUS_RX_HQ_INTR_CSR_PARITY_ERR_SMASK 0x200000000000ull +#define RCV_ERR_STATUS_RX_HQ_INTR_FSM_ERR_SMASK 0x400000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_CSR_PARITY_ERR_SMASK 0x100000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_DES_PART1_UNC_COR_ERR_SMASK \ + 0x10000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_DES_PART1_UNC_ERR_SMASK 0x8000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_DES_PART2_PARITY_ERR_SMASK \ + 0x20000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_RCV_ARRAY_COR_ERR_SMASK 0x80000000000ull +#define RCV_ERR_STATUS_RX_LOOKUP_RCV_ARRAY_UNC_ERR_SMASK 0x40000000000ull +#define RCV_ERR_STATUS_RX_RBUF_BAD_LOOKUP_ERR_SMASK 0x40000000ull +#define RCV_ERR_STATUS_RX_RBUF_BLOCK_LIST_READ_COR_ERR_SMASK 0x100000ull +#define RCV_ERR_STATUS_RX_RBUF_BLOCK_LIST_READ_UNC_ERR_SMASK 0x80000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QENT_CNT_PARITY_ERR_SMASK 0x400000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QEOPDW_PARITY_ERR_SMASK 0x10000000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QHD_PTR_PARITY_ERR_SMASK 0x2000000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QHEAD_BUF_NUM_PARITY_ERR_SMASK \ + 0x200000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QNEXT_BUF_PARITY_ERR_SMASK 0x800000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QNUM_OF_PKT_PARITY_ERR_SMASK \ + 0x8000000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QTL_PTR_PARITY_ERR_SMASK 0x4000000ull +#define RCV_ERR_STATUS_RX_RBUF_CSR_QVLD_BIT_PARITY_ERR_SMASK 0x1000000ull +#define RCV_ERR_STATUS_RX_RBUF_CTX_ID_PARITY_ERR_SMASK 0x20000000ull +#define RCV_ERR_STATUS_RX_RBUF_DATA_COR_ERR_SMASK 0x100000000000000ull +#define RCV_ERR_STATUS_RX_RBUF_DATA_UNC_ERR_SMASK 0x80000000000000ull +#define RCV_ERR_STATUS_RX_RBUF_DESC_PART1_COR_ERR_SMASK 0x1000000000000ull +#define RCV_ERR_STATUS_RX_RBUF_DESC_PART1_UNC_ERR_SMASK 0x800000000000ull +#define RCV_ERR_STATUS_RX_RBUF_DESC_PART2_COR_ERR_SMASK 0x4000000000000ull +#define RCV_ERR_STATUS_RX_RBUF_DESC_PART2_UNC_ERR_SMASK 0x2000000000000ull +#define RCV_ERR_STATUS_RX_RBUF_EMPTY_ERR_SMASK 0x100000000ull +#define RCV_ERR_STATUS_RX_RBUF_FL_INITDONE_PARITY_ERR_SMASK 0x800000000ull +#define RCV_ERR_STATUS_RX_RBUF_FL_INIT_WR_ADDR_PARITY_ERR_SMASK \ + 0x1000000000ull +#define RCV_ERR_STATUS_RX_RBUF_FL_RD_ADDR_PARITY_ERR_SMASK 0x200000000ull +#define RCV_ERR_STATUS_RX_RBUF_FL_WR_ADDR_PARITY_ERR_SMASK 0x400000000ull +#define RCV_ERR_STATUS_RX_RBUF_FREE_LIST_COR_ERR_SMASK 0x4000ull +#define RCV_ERR_STATUS_RX_RBUF_FREE_LIST_UNC_ERR_SMASK 0x2000ull +#define RCV_ERR_STATUS_RX_RBUF_FULL_ERR_SMASK 0x80000000ull +#define RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_COR_ERR_SMASK 0x40000ull +#define RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_REG_UNC_COR_ERR_SMASK 0x10000ull +#define RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_REG_UNC_ERR_SMASK 0x8000ull +#define RCV_ERR_STATUS_RX_RBUF_LOOKUP_DES_UNC_ERR_SMASK 0x20000ull +#define RCV_ERR_STATUS_RX_RBUF_NEXT_FREE_BUF_COR_ERR_SMASK 0x4000000000ull +#define RCV_ERR_STATUS_RX_RBUF_NEXT_FREE_BUF_UNC_ERR_SMASK 0x2000000000ull +#define RCV_ERR_STATUS_RX_RCV_CSR_PARITY_ERR_SMASK 0x100ull +#define RCV_ERR_STATUS_RX_RCV_DATA_COR_ERR_SMASK 0x20ull +#define RCV_ERR_STATUS_RX_RCV_DATA_UNC_ERR_SMASK 0x10ull +#define RCV_ERR_STATUS_RX_RCV_FSM_ENCODING_ERR_SMASK 0x1000ull +#define RCV_ERR_STATUS_RX_RCV_HDR_COR_ERR_SMASK 0x8ull +#define RCV_ERR_STATUS_RX_RCV_HDR_UNC_ERR_SMASK 0x4ull +#define RCV_ERR_STATUS_RX_RCV_QP_MAP_TABLE_COR_ERR_SMASK 0x80ull +#define RCV_ERR_STATUS_RX_RCV_QP_MAP_TABLE_UNC_ERR_SMASK 0x40ull +#define RCV_HDR_ADDR (RXE + 0x000000100028) +#define RCV_HDR_CNT (RXE + 0x000000100030) +#define RCV_HDR_CNT_CNT_MASK 0x1FFull +#define RCV_HDR_CNT_CNT_SHIFT 0 +#define RCV_HDR_ENT_SIZE (RXE + 0x000000100038) +#define RCV_HDR_ENT_SIZE_ENT_SIZE_MASK 0x7ull +#define RCV_HDR_ENT_SIZE_ENT_SIZE_SHIFT 0 +#define RCV_HDR_HEAD (RXE + 0x000000300008) +#define RCV_HDR_HEAD_COUNTER_MASK 0xFFull +#define RCV_HDR_HEAD_COUNTER_SHIFT 32 +#define RCV_HDR_HEAD_HEAD_MASK 0x7FFFFull +#define RCV_HDR_HEAD_HEAD_SHIFT 0 +#define RCV_HDR_HEAD_HEAD_SMASK 0x7FFFFull +#define RCV_HDR_OVFL_CNT (RXE + 0x000000100058) +#define RCV_HDR_SIZE (RXE + 0x000000100040) +#define RCV_HDR_SIZE_HDR_SIZE_MASK 0x1Full +#define RCV_HDR_SIZE_HDR_SIZE_SHIFT 0 +#define RCV_HDR_TAIL (RXE + 0x000000300000) +#define RCV_HDR_TAIL_ADDR (RXE + 0x000000100048) +#define RCV_KEY_CTRL (RXE + 0x000000100020) +#define RCV_KEY_CTRL_JOB_KEY_ENABLE_SMASK 0x200000000ull +#define RCV_KEY_CTRL_JOB_KEY_VALUE_MASK 0xFFFFull +#define RCV_KEY_CTRL_JOB_KEY_VALUE_SHIFT 0 +#define RCV_MULTICAST (RXE + 0x000000000030) +#define RCV_PARTITION_KEY (RXE + 0x000000000200) +#define RCV_PARTITION_KEY_PARTITION_KEY_A_MASK 0xFFFFull +#define RCV_PARTITION_KEY_PARTITION_KEY_B_SHIFT 16 +#define RCV_QP_MAP_TABLE (RXE + 0x000000000100) +#define RCV_RSM_CFG (RXE + 0x000000000600) +#define RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_MASK 0x1ull +#define RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_SHIFT 0 +#define RCV_RSM_CFG_PACKET_TYPE_SHIFT 60 +#define RCV_RSM_MAP_TABLE (RXE + 0x000000000900) +#define RCV_RSM_MAP_TABLE_RCV_CONTEXT_A_MASK 0xFFull +#define RCV_RSM_MATCH (RXE + 0x000000000800) +#define RCV_RSM_MATCH_MASK1_SHIFT 0 +#define RCV_RSM_MATCH_MASK2_SHIFT 16 +#define RCV_RSM_MATCH_VALUE1_SHIFT 8 +#define RCV_RSM_MATCH_VALUE2_SHIFT 24 +#define RCV_RSM_SELECT (RXE + 0x000000000700) +#define RCV_RSM_SELECT_FIELD1_OFFSET_SHIFT 0 +#define RCV_RSM_SELECT_FIELD2_OFFSET_SHIFT 16 +#define RCV_RSM_SELECT_INDEX1_OFFSET_SHIFT 32 +#define RCV_RSM_SELECT_INDEX1_WIDTH_SHIFT 44 +#define RCV_RSM_SELECT_INDEX2_OFFSET_SHIFT 48 +#define RCV_RSM_SELECT_INDEX2_WIDTH_SHIFT 60 +#define RCV_STATUS (RXE + 0x000000000008) +#define RCV_STATUS_RX_PKT_IN_PROGRESS_SMASK 0x1ull +#define RCV_STATUS_RX_RBUF_INIT_DONE_SMASK 0x200ull +#define RCV_STATUS_RX_RBUF_PKT_PENDING_SMASK 0x40ull +#define RCV_TID_CTRL (RXE + 0x000000100018) +#define RCV_TID_CTRL_TID_BASE_INDEX_MASK 0x1FFFull +#define RCV_TID_CTRL_TID_BASE_INDEX_SHIFT 0 +#define RCV_TID_CTRL_TID_PAIR_CNT_MASK 0x1FFull +#define RCV_TID_CTRL_TID_PAIR_CNT_SHIFT 32 +#define RCV_TID_FLOW_TABLE (RXE + 0x000000300800) +#define RCV_VL15 (RXE + 0x000000000048) +#define SEND_BTH_QP (TXE + 0x0000000000A0) +#define SEND_BTH_QP_KDETH_QP_MASK 0xFFull +#define SEND_BTH_QP_KDETH_QP_SHIFT 16 +#define SEND_CM_CREDIT_USED_STATUS (TXE + 0x000000000510) +#define SEND_CM_CREDIT_USED_STATUS_VL0_RETURN_CREDIT_STATUS_SMASK \ + 0x1000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL15_RETURN_CREDIT_STATUS_SMASK \ + 0x8000000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL1_RETURN_CREDIT_STATUS_SMASK \ + 0x2000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL2_RETURN_CREDIT_STATUS_SMASK \ + 0x4000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL3_RETURN_CREDIT_STATUS_SMASK \ + 0x8000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL4_RETURN_CREDIT_STATUS_SMASK \ + 0x10000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL5_RETURN_CREDIT_STATUS_SMASK \ + 0x20000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL6_RETURN_CREDIT_STATUS_SMASK \ + 0x40000000000000ull +#define SEND_CM_CREDIT_USED_STATUS_VL7_RETURN_CREDIT_STATUS_SMASK \ + 0x80000000000000ull +#define SEND_CM_CREDIT_VL (TXE + 0x000000000600) +#define SEND_CM_CREDIT_VL15 (TXE + 0x000000000678) +#define SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT 0 +#define SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_MASK 0xFFFFull +#define SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SHIFT 0 +#define SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SMASK 0xFFFFull +#define SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_MASK 0xFFFFull +#define SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_SHIFT 16 +#define SEND_CM_CREDIT_VL_SHARED_LIMIT_VL_SMASK 0xFFFF0000ull +#define SEND_CM_CTRL (TXE + 0x000000000500) +#define SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK 0x8ull +#define SEND_CM_CTRL_RESETCSR 0x0000000000000020ull +#define SEND_CM_GLOBAL_CREDIT (TXE + 0x000000000508) +#define SEND_CM_GLOBAL_CREDIT_AU_SHIFT 16 +#define SEND_CM_GLOBAL_CREDIT_RESETCSR 0x0000094000030000ull +#define SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_MASK 0xFFFFull +#define SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT 0 +#define SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SMASK 0xFFFFull +#define SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_MASK 0xFFFFull +#define SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT 32 +#define SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SMASK 0xFFFF00000000ull +#define SEND_CM_LOCAL_AU_TABLE0_TO3 (TXE + 0x000000000520) +#define SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE0_SHIFT 0 +#define SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE1_SHIFT 16 +#define SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE2_SHIFT 32 +#define SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE3_SHIFT 48 +#define SEND_CM_LOCAL_AU_TABLE4_TO7 (TXE + 0x000000000528) +#define SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE4_SHIFT 0 +#define SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE5_SHIFT 16 +#define SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE6_SHIFT 32 +#define SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE7_SHIFT 48 +#define SEND_CM_REMOTE_AU_TABLE0_TO3 (TXE + 0x000000000530) +#define SEND_CM_REMOTE_AU_TABLE4_TO7 (TXE + 0x000000000538) +#define SEND_CM_TIMER_CTRL (TXE + 0x000000000518) +#define SEND_CONTEXTS (TXE + 0x000000000010) +#define SEND_CONTEXT_SET_CTRL (TXE + 0x000000000200) +#define SEND_COUNTER_ARRAY32 (TXE + 0x000000000300) +#define SEND_COUNTER_ARRAY64 (TXE + 0x000000000400) +#define SEND_CTRL (TXE + 0x000000000000) +#define SEND_CTRL_CM_RESET_SMASK 0x4ull +#define SEND_CTRL_SEND_ENABLE_SMASK 0x1ull +#define SEND_CTRL_VL_ARBITER_ENABLE_SMASK 0x2ull +#define SEND_CTXT_CHECK_ENABLE (TXE + 0x000000100080) +#define SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK 0x80ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK 0x1ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK 0x4ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK 0x20ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK 0x8ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK 0x10ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK 0x40ull +#define SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK 0x2ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK 0x20000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK \ + 0x200000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK 0x800ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK 0x400ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK 0x1000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK 0x2000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK \ + 0x100000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK 0x10000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK 0x200ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK 0x100ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK \ + 0x80000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK \ + 0x40000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK \ + 0x8000ull +#define SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK \ + 0x4000ull +#define SEND_CTXT_CHECK_JOB_KEY (TXE + 0x000000100090) +#define SEND_CTXT_CHECK_JOB_KEY_ALLOW_PERMISSIVE_SMASK 0x100000000ull +#define SEND_CTXT_CHECK_JOB_KEY_MASK_SMASK 0xFFFF0000ull +#define SEND_CTXT_CHECK_JOB_KEY_VALUE_MASK 0xFFFFull +#define SEND_CTXT_CHECK_JOB_KEY_VALUE_SHIFT 0 +#define SEND_CTXT_CHECK_OPCODE (TXE + 0x0000001000A8) +#define SEND_CTXT_CHECK_OPCODE_MASK_SHIFT 8 +#define SEND_CTXT_CHECK_OPCODE_VALUE_SHIFT 0 +#define SEND_CTXT_CHECK_PARTITION_KEY (TXE + 0x000000100098) +#define SEND_CTXT_CHECK_PARTITION_KEY_VALUE_MASK 0xFFFFull +#define SEND_CTXT_CHECK_PARTITION_KEY_VALUE_SHIFT 0 +#define SEND_CTXT_CHECK_SLID (TXE + 0x0000001000A0) +#define SEND_CTXT_CHECK_SLID_MASK_MASK 0xFFFFull +#define SEND_CTXT_CHECK_SLID_MASK_SHIFT 16 +#define SEND_CTXT_CHECK_SLID_VALUE_MASK 0xFFFFull +#define SEND_CTXT_CHECK_SLID_VALUE_SHIFT 0 +#define SEND_CTXT_CHECK_VL (TXE + 0x000000100088) +#define SEND_CTXT_CREDIT_CTRL (TXE + 0x000000100010) +#define SEND_CTXT_CREDIT_CTRL_CREDIT_INTR_SMASK 0x20000ull +#define SEND_CTXT_CREDIT_CTRL_EARLY_RETURN_SMASK 0x10000ull +#define SEND_CTXT_CREDIT_CTRL_THRESHOLD_MASK 0x7FFull +#define SEND_CTXT_CREDIT_CTRL_THRESHOLD_SHIFT 0 +#define SEND_CTXT_CREDIT_CTRL_THRESHOLD_SMASK 0x7FFull +#define SEND_CTXT_CREDIT_FORCE (TXE + 0x000000100028) +#define SEND_CTXT_CREDIT_FORCE_FORCE_RETURN_SMASK 0x1ull +#define SEND_CTXT_CREDIT_RETURN_ADDR (TXE + 0x000000100020) +#define SEND_CTXT_CREDIT_RETURN_ADDR_ADDRESS_SMASK 0xFFFFFFFFFFC0ull +#define SEND_CTXT_CTRL (TXE + 0x000000100000) +#define SEND_CTXT_CTRL_CTXT_BASE_MASK 0x3FFFull +#define SEND_CTXT_CTRL_CTXT_BASE_SHIFT 32 +#define SEND_CTXT_CTRL_CTXT_DEPTH_MASK 0x7FFull +#define SEND_CTXT_CTRL_CTXT_DEPTH_SHIFT 48 +#define SEND_CTXT_CTRL_CTXT_ENABLE_SMASK 0x1ull +#define SEND_CTXT_ERR_CLEAR (TXE + 0x000000100050) +#define SEND_CTXT_ERR_MASK (TXE + 0x000000100048) +#define SEND_CTXT_ERR_STATUS (TXE + 0x000000100040) +#define SEND_CTXT_ERR_STATUS_PIO_DISALLOWED_PACKET_ERR_SMASK 0x2ull +#define SEND_CTXT_ERR_STATUS_PIO_INCONSISTENT_SOP_ERR_SMASK 0x1ull +#define SEND_CTXT_ERR_STATUS_PIO_WRITE_CROSSES_BOUNDARY_ERR_SMASK 0x4ull +#define SEND_CTXT_ERR_STATUS_PIO_WRITE_OUT_OF_BOUNDS_ERR_SMASK 0x10ull +#define SEND_CTXT_ERR_STATUS_PIO_WRITE_OVERFLOW_ERR_SMASK 0x8ull +#define SEND_CTXT_STATUS (TXE + 0x000000100008) +#define SEND_CTXT_STATUS_CTXT_HALTED_SMASK 0x1ull +#define SEND_DMA_BASE_ADDR (TXE + 0x000000200010) +#define SEND_DMA_CHECK_ENABLE (TXE + 0x000000200080) +#define SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK 0x80ull +#define SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK 0x1ull +#define SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK 0x4ull +#define SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK 0x20ull +#define SEND_DMA_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK 0x8ull +#define SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK 0x10ull +#define SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK 0x40ull +#define SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK 0x2ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK 0x20000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK 0x200000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK \ + 0x100000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK 0x200ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK 0x100ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK \ + 0x80000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK 0x40000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK \ + 0x8000ull +#define SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK 0x4000ull +#define SEND_DMA_CHECK_JOB_KEY (TXE + 0x000000200090) +#define SEND_DMA_CHECK_OPCODE (TXE + 0x0000002000A8) +#define SEND_DMA_CHECK_PARTITION_KEY (TXE + 0x000000200098) +#define SEND_DMA_CHECK_SLID (TXE + 0x0000002000A0) +#define SEND_DMA_CHECK_SLID_MASK_MASK 0xFFFFull +#define SEND_DMA_CHECK_SLID_MASK_SHIFT 16 +#define SEND_DMA_CHECK_SLID_VALUE_MASK 0xFFFFull +#define SEND_DMA_CHECK_SLID_VALUE_SHIFT 0 +#define SEND_DMA_CHECK_VL (TXE + 0x000000200088) +#define SEND_DMA_CTRL (TXE + 0x000000200000) +#define SEND_DMA_CTRL_SDMA_CLEANUP_SMASK 0x4ull +#define SEND_DMA_CTRL_SDMA_ENABLE_SMASK 0x1ull +#define SEND_DMA_CTRL_SDMA_HALT_SMASK 0x2ull +#define SEND_DMA_CTRL_SDMA_INT_ENABLE_SMASK 0x8ull +#define SEND_DMA_DESC_CNT (TXE + 0x000000200050) +#define SEND_DMA_DESC_CNT_CNT_MASK 0xFFFFull +#define SEND_DMA_DESC_CNT_CNT_SHIFT 0 +#define SEND_DMA_ENG_ERR_CLEAR (TXE + 0x000000200070) +#define SEND_DMA_ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_MASK 0x1ull +#define SEND_DMA_ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SHIFT 18 +#define SEND_DMA_ENG_ERR_MASK (TXE + 0x000000200068) +#define SEND_DMA_ENG_ERR_STATUS (TXE + 0x000000200060) +#define SEND_DMA_ENG_ERR_STATUS_SDMA_ASSEMBLY_UNC_ERR_SMASK 0x8000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_DESC_TABLE_UNC_ERR_SMASK 0x4000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_FIRST_DESC_ERR_SMASK 0x10ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_GEN_MISMATCH_ERR_SMASK 0x2ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK 0x40ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HEADER_ADDRESS_ERR_SMASK 0x800ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HEADER_LENGTH_ERR_SMASK 0x1000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SMASK \ + 0x40000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HEADER_SELECT_ERR_SMASK 0x400ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_HEADER_STORAGE_UNC_ERR_SMASK \ + 0x20000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_LENGTH_MISMATCH_ERR_SMASK 0x80ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_MEM_READ_ERR_SMASK 0x20ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_PACKET_DESC_OVERFLOW_ERR_SMASK \ + 0x100ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_PACKET_TRACKING_UNC_ERR_SMASK \ + 0x10000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_TAIL_OUT_OF_BOUNDS_ERR_SMASK 0x8ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_TIMEOUT_ERR_SMASK 0x2000ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_TOO_LONG_ERR_SMASK 0x4ull +#define SEND_DMA_ENG_ERR_STATUS_SDMA_WRONG_DW_ERR_SMASK 0x1ull +#define SEND_DMA_ENGINES (TXE + 0x000000000018) +#define SEND_DMA_ERR_CLEAR (TXE + 0x000000000070) +#define SEND_DMA_ERR_MASK (TXE + 0x000000000068) +#define SEND_DMA_ERR_STATUS (TXE + 0x000000000060) +#define SEND_DMA_ERR_STATUS_SDMA_CSR_PARITY_ERR_SMASK 0x2ull +#define SEND_DMA_ERR_STATUS_SDMA_PCIE_REQ_TRACKING_COR_ERR_SMASK 0x8ull +#define SEND_DMA_ERR_STATUS_SDMA_PCIE_REQ_TRACKING_UNC_ERR_SMASK 0x4ull +#define SEND_DMA_ERR_STATUS_SDMA_RPY_TAG_ERR_SMASK 0x1ull +#define SEND_DMA_HEAD (TXE + 0x000000200028) +#define SEND_DMA_HEAD_ADDR (TXE + 0x000000200030) +#define SEND_DMA_LEN_GEN (TXE + 0x000000200018) +#define SEND_DMA_LEN_GEN_GENERATION_SHIFT 16 +#define SEND_DMA_LEN_GEN_LENGTH_SHIFT 6 +#define SEND_DMA_MEMORY (TXE + 0x0000002000B0) +#define SEND_DMA_MEMORY_SDMA_MEMORY_CNT_SHIFT 16 +#define SEND_DMA_MEMORY_SDMA_MEMORY_INDEX_SHIFT 0 +#define SEND_DMA_MEM_SIZE (TXE + 0x000000000028) +#define SEND_DMA_PRIORITY_THLD (TXE + 0x000000200038) +#define SEND_DMA_RELOAD_CNT (TXE + 0x000000200048) +#define SEND_DMA_STATUS (TXE + 0x000000200008) +#define SEND_DMA_STATUS_ENG_CLEANED_UP_SMASK 0x200000000000000ull +#define SEND_DMA_STATUS_ENG_HALTED_SMASK 0x100000000000000ull +#define SEND_DMA_TAIL (TXE + 0x000000200020) +#define SEND_EGRESS_CTXT_STATUS (TXE + 0x000000000800) +#define SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_HALT_STATUS_SMASK 0x10000ull +#define SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SHIFT 0 +#define SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SMASK \ + 0x3FFFull +#define SEND_EGRESS_ERR_CLEAR (TXE + 0x000000000090) +#define SEND_EGRESS_ERR_INFO (TXE + 0x000000000F00) +#define SEND_EGRESS_ERR_INFO_BAD_PKT_LEN_ERR_SMASK 0x20000ull +#define SEND_EGRESS_ERR_INFO_BYPASS_ERR_SMASK 0x800ull +#define SEND_EGRESS_ERR_INFO_GRH_ERR_SMASK 0x400ull +#define SEND_EGRESS_ERR_INFO_JOB_KEY_ERR_SMASK 0x4ull +#define SEND_EGRESS_ERR_INFO_KDETH_PACKETS_ERR_SMASK 0x1000ull +#define SEND_EGRESS_ERR_INFO_NON_KDETH_PACKETS_ERR_SMASK 0x2000ull +#define SEND_EGRESS_ERR_INFO_OPCODE_ERR_SMASK 0x20ull +#define SEND_EGRESS_ERR_INFO_PARTITION_KEY_ERR_SMASK 0x8ull +#define SEND_EGRESS_ERR_INFO_PBC_STATIC_RATE_CONTROL_ERR_SMASK 0x100000ull +#define SEND_EGRESS_ERR_INFO_PBC_TEST_ERR_SMASK 0x10000ull +#define SEND_EGRESS_ERR_INFO_RAW_ERR_SMASK 0x100ull +#define SEND_EGRESS_ERR_INFO_RAW_IPV6_ERR_SMASK 0x200ull +#define SEND_EGRESS_ERR_INFO_SLID_ERR_SMASK 0x10ull +#define SEND_EGRESS_ERR_INFO_TOO_LONG_BYPASS_PACKETS_ERR_SMASK 0x80000ull +#define SEND_EGRESS_ERR_INFO_TOO_LONG_IB_PACKET_ERR_SMASK 0x40000ull +#define SEND_EGRESS_ERR_INFO_TOO_SMALL_BYPASS_PACKETS_ERR_SMASK 0x8000ull +#define SEND_EGRESS_ERR_INFO_TOO_SMALL_IB_PACKETS_ERR_SMASK 0x4000ull +#define SEND_EGRESS_ERR_INFO_VL_ERR_SMASK 0x2ull +#define SEND_EGRESS_ERR_INFO_VL_MAPPING_ERR_SMASK 0x40ull +#define SEND_EGRESS_ERR_MASK (TXE + 0x000000000088) +#define SEND_EGRESS_ERR_SOURCE (TXE + 0x000000000F08) +#define SEND_EGRESS_ERR_STATUS (TXE + 0x000000000080) +#define SEND_EGRESS_ERR_STATUS_TX_CONFIG_PARITY_ERR_SMASK 0x8000ull +#define SEND_EGRESS_ERR_STATUS_TX_CREDIT_OVERRUN_ERR_SMASK \ + 0x200000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_CREDIT_RETURN_PARITY_ERR_SMASK \ + 0x20000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_CREDIT_RETURN_VL_ERR_SMASK \ + 0x800000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_EGRESS_FIFO_COR_ERR_SMASK \ + 0x2000000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_EGRESS_FIFO_UNC_ERR_SMASK \ + 0x200000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_EGRESS_FIFO_UNDERRUN_OR_PARITY_ERR_SMASK \ + 0x8ull +#define SEND_EGRESS_ERR_STATUS_TX_HCRC_INSERTION_ERR_SMASK \ + 0x400000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_ILLEGAL_VL_ERR_SMASK 0x1000ull +#define SEND_EGRESS_ERR_STATUS_TX_INCORRECT_LINK_STATE_ERR_SMASK 0x20ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_CSR_PARITY_ERR_SMASK 0x2000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO0_COR_ERR_SMASK \ + 0x1000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO0_UNC_OR_PARITY_ERR_SMASK \ + 0x100000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO1_COR_ERR_SMASK \ + 0x2000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO1_UNC_OR_PARITY_ERR_SMASK \ + 0x200000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO2_COR_ERR_SMASK \ + 0x4000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO2_UNC_OR_PARITY_ERR_SMASK \ + 0x400000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO3_COR_ERR_SMASK \ + 0x8000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO3_UNC_OR_PARITY_ERR_SMASK \ + 0x800000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO4_COR_ERR_SMASK \ + 0x10000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO4_UNC_OR_PARITY_ERR_SMASK \ + 0x1000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO5_COR_ERR_SMASK \ + 0x20000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO5_UNC_OR_PARITY_ERR_SMASK \ + 0x2000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO6_COR_ERR_SMASK \ + 0x40000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO6_UNC_OR_PARITY_ERR_SMASK \ + 0x4000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO7_COR_ERR_SMASK \ + 0x80000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO7_UNC_OR_PARITY_ERR_SMASK \ + 0x8000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO8_COR_ERR_SMASK \ + 0x100000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LAUNCH_FIFO8_UNC_OR_PARITY_ERR_SMASK \ + 0x10000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_LINKDOWN_ERR_SMASK 0x10ull +#define SEND_EGRESS_ERR_STATUS_TX_PIO_LAUNCH_INTF_PARITY_ERR_SMASK 0x80ull +#define SEND_EGRESS_ERR_STATUS_TX_PKT_INTEGRITY_MEM_COR_ERR_SMASK 0x1ull +#define SEND_EGRESS_ERR_STATUS_TX_PKT_INTEGRITY_MEM_UNC_ERR_SMASK 0x2ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_PIO_MEMORY_COR_ERR_SMASK \ + 0x1000000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_PIO_MEMORY_CSR_UNC_ERR_SMASK \ + 0x8000000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_PIO_MEMORY_UNC_ERR_SMASK \ + 0x100000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_SDMA_MEMORY_COR_ERR_SMASK \ + 0x800000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_SDMA_MEMORY_CSR_UNC_ERR_SMASK \ + 0x4000000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_READ_SDMA_MEMORY_UNC_ERR_SMASK \ + 0x80000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SB_HDR_COR_ERR_SMASK 0x400000000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SB_HDR_UNC_ERR_SMASK 0x40000000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SBRD_CTL_CSR_PARITY_ERR_SMASK 0x4000ull +#define SEND_EGRESS_ERR_STATUS_TX_SBRD_CTL_STATE_MACHINE_PARITY_ERR_SMASK \ + 0x800ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA0_DISALLOWED_PACKET_ERR_SMASK \ + 0x10000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA10_DISALLOWED_PACKET_ERR_SMASK \ + 0x4000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA11_DISALLOWED_PACKET_ERR_SMASK \ + 0x8000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA12_DISALLOWED_PACKET_ERR_SMASK \ + 0x10000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA13_DISALLOWED_PACKET_ERR_SMASK \ + 0x20000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA14_DISALLOWED_PACKET_ERR_SMASK \ + 0x40000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA15_DISALLOWED_PACKET_ERR_SMASK \ + 0x80000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA1_DISALLOWED_PACKET_ERR_SMASK \ + 0x20000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA2_DISALLOWED_PACKET_ERR_SMASK \ + 0x40000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA3_DISALLOWED_PACKET_ERR_SMASK \ + 0x80000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA4_DISALLOWED_PACKET_ERR_SMASK \ + 0x100000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA5_DISALLOWED_PACKET_ERR_SMASK \ + 0x200000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA6_DISALLOWED_PACKET_ERR_SMASK \ + 0x400000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA7_DISALLOWED_PACKET_ERR_SMASK \ + 0x800000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA8_DISALLOWED_PACKET_ERR_SMASK \ + 0x1000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA9_DISALLOWED_PACKET_ERR_SMASK \ + 0x2000000ull +#define SEND_EGRESS_ERR_STATUS_TX_SDMA_LAUNCH_INTF_PARITY_ERR_SMASK \ + 0x100ull +#define SEND_EGRESS_SEND_DMA_STATUS (TXE + 0x000000000E00) +#define SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT 0 +#define SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SMASK \ + 0x3FFFull +#define SEND_ERR_CLEAR (TXE + 0x0000000000F0) +#define SEND_ERR_MASK (TXE + 0x0000000000E8) +#define SEND_ERR_STATUS (TXE + 0x0000000000E0) +#define SEND_ERR_STATUS_SEND_CSR_PARITY_ERR_SMASK 0x1ull +#define SEND_ERR_STATUS_SEND_CSR_READ_BAD_ADDR_ERR_SMASK 0x2ull +#define SEND_ERR_STATUS_SEND_CSR_WRITE_BAD_ADDR_ERR_SMASK 0x4ull +#define SEND_HIGH_PRIORITY_LIMIT (TXE + 0x000000000030) +#define SEND_HIGH_PRIORITY_LIMIT_LIMIT_MASK 0x3FFFull +#define SEND_HIGH_PRIORITY_LIMIT_LIMIT_SHIFT 0 +#define SEND_HIGH_PRIORITY_LIST (TXE + 0x000000000180) +#define SEND_LEN_CHECK0 (TXE + 0x0000000000D0) +#define SEND_LEN_CHECK0_LEN_VL0_MASK 0xFFFull +#define SEND_LEN_CHECK0_LEN_VL1_SHIFT 12 +#define SEND_LEN_CHECK1 (TXE + 0x0000000000D8) +#define SEND_LEN_CHECK1_LEN_VL15_MASK 0xFFFull +#define SEND_LEN_CHECK1_LEN_VL15_SHIFT 48 +#define SEND_LEN_CHECK1_LEN_VL4_MASK 0xFFFull +#define SEND_LEN_CHECK1_LEN_VL5_SHIFT 12 +#define SEND_LOW_PRIORITY_LIST (TXE + 0x000000000100) +#define SEND_LOW_PRIORITY_LIST_VL_MASK 0x7ull +#define SEND_LOW_PRIORITY_LIST_VL_SHIFT 16 +#define SEND_LOW_PRIORITY_LIST_WEIGHT_MASK 0xFFull +#define SEND_LOW_PRIORITY_LIST_WEIGHT_SHIFT 0 +#define SEND_PIO_ERR_CLEAR (TXE + 0x000000000050) +#define SEND_PIO_ERR_CLEAR_PIO_INIT_SM_IN_ERR_SMASK 0x20000ull +#define SEND_PIO_ERR_MASK (TXE + 0x000000000048) +#define SEND_PIO_ERR_STATUS (TXE + 0x000000000040) +#define SEND_PIO_ERR_STATUS_PIO_BLOCK_QW_COUNT_PARITY_ERR_SMASK \ + 0x1000000ull +#define SEND_PIO_ERR_STATUS_PIO_CREDIT_RET_FIFO_PARITY_ERR_SMASK 0x8000ull +#define SEND_PIO_ERR_STATUS_PIO_CSR_PARITY_ERR_SMASK 0x4ull +#define SEND_PIO_ERR_STATUS_PIO_CURRENT_FREE_CNT_PARITY_ERR_SMASK \ + 0x100000000ull +#define SEND_PIO_ERR_STATUS_PIO_HOST_ADDR_MEM_COR_ERR_SMASK 0x100000ull +#define SEND_PIO_ERR_STATUS_PIO_HOST_ADDR_MEM_UNC_ERR_SMASK 0x80000ull +#define SEND_PIO_ERR_STATUS_PIO_INIT_SM_IN_ERR_SMASK 0x20000ull +#define SEND_PIO_ERR_STATUS_PIO_LAST_RETURNED_CNT_PARITY_ERR_SMASK \ + 0x200000000ull +#define SEND_PIO_ERR_STATUS_PIO_PCC_FIFO_PARITY_ERR_SMASK 0x20ull +#define SEND_PIO_ERR_STATUS_PIO_PCC_SOP_HEAD_PARITY_ERR_SMASK \ + 0x400000000ull +#define SEND_PIO_ERR_STATUS_PIO_PEC_FIFO_PARITY_ERR_SMASK 0x40ull +#define SEND_PIO_ERR_STATUS_PIO_PEC_SOP_HEAD_PARITY_ERR_SMASK \ + 0x800000000ull +#define SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_FIFO_PARITY_ERR_SMASK 0x200ull +#define SEND_PIO_ERR_STATUS_PIO_PKT_EVICT_SM_OR_ARB_SM_ERR_SMASK 0x40000ull +#define SEND_PIO_ERR_STATUS_PIO_PPMC_BQC_MEM_PARITY_ERR_SMASK 0x10000000ull +#define SEND_PIO_ERR_STATUS_PIO_PPMC_PBL_FIFO_ERR_SMASK 0x10000ull +#define SEND_PIO_ERR_STATUS_PIO_PPMC_SOP_LEN_ERR_SMASK 0x20000000ull +#define SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO0_ERR_SMASK 0x8ull +#define SEND_PIO_ERR_STATUS_PIO_SB_MEM_FIFO1_ERR_SMASK 0x10ull +#define SEND_PIO_ERR_STATUS_PIO_SBRDCTL_CRREL_PARITY_ERR_SMASK 0x80ull +#define SEND_PIO_ERR_STATUS_PIO_SBRDCTRL_CRREL_FIFO_PARITY_ERR_SMASK \ + 0x100ull +#define SEND_PIO_ERR_STATUS_PIO_SM_PKT_RESET_PARITY_ERR_SMASK 0x400ull +#define SEND_PIO_ERR_STATUS_PIO_STATE_MACHINE_ERR_SMASK 0x400000ull +#define SEND_PIO_ERR_STATUS_PIO_VL_FIFO_PARITY_ERR_SMASK 0x8000000ull +#define SEND_PIO_ERR_STATUS_PIO_VLF_SOP_PARITY_ERR_SMASK 0x4000000ull +#define SEND_PIO_ERR_STATUS_PIO_VLF_VL_LEN_PARITY_ERR_SMASK 0x2000000ull +#define SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK0_COR_ERR_SMASK 0x2000ull +#define SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK0_UNC_ERR_SMASK 0x800ull +#define SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK1_COR_ERR_SMASK 0x4000ull +#define SEND_PIO_ERR_STATUS_PIO_VL_LEN_MEM_BANK1_UNC_ERR_SMASK 0x1000ull +#define SEND_PIO_ERR_STATUS_PIO_WRITE_ADDR_PARITY_ERR_SMASK 0x2ull +#define SEND_PIO_ERR_STATUS_PIO_WRITE_BAD_CTXT_ERR_SMASK 0x1ull +#define SEND_PIO_ERR_STATUS_PIO_WRITE_DATA_PARITY_ERR_SMASK 0x200000ull +#define SEND_PIO_ERR_STATUS_PIO_WRITE_QW_VALID_PARITY_ERR_SMASK 0x800000ull +#define SEND_PIO_INIT_CTXT (TXE + 0x000000000038) +#define SEND_PIO_INIT_CTXT_PIO_ALL_CTXT_INIT_SMASK 0x1ull +#define SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_MASK 0xFFull +#define SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_SHIFT 8 +#define SEND_PIO_INIT_CTXT_PIO_INIT_ERR_SMASK 0x8ull +#define SEND_PIO_INIT_CTXT_PIO_INIT_IN_PROGRESS_SMASK 0x4ull +#define SEND_PIO_INIT_CTXT_PIO_SINGLE_CTXT_INIT_SMASK 0x2ull +#define SEND_PIO_MEM_SIZE (TXE + 0x000000000020) +#define SEND_SC2VLT0 (TXE + 0x0000000000B0) +#define SEND_SC2VLT0_SC0_SHIFT 0 +#define SEND_SC2VLT0_SC1_SHIFT 8 +#define SEND_SC2VLT0_SC2_SHIFT 16 +#define SEND_SC2VLT0_SC3_SHIFT 24 +#define SEND_SC2VLT0_SC4_SHIFT 32 +#define SEND_SC2VLT0_SC5_SHIFT 40 +#define SEND_SC2VLT0_SC6_SHIFT 48 +#define SEND_SC2VLT0_SC7_SHIFT 56 +#define SEND_SC2VLT1 (TXE + 0x0000000000B8) +#define SEND_SC2VLT1_SC10_SHIFT 16 +#define SEND_SC2VLT1_SC11_SHIFT 24 +#define SEND_SC2VLT1_SC12_SHIFT 32 +#define SEND_SC2VLT1_SC13_SHIFT 40 +#define SEND_SC2VLT1_SC14_SHIFT 48 +#define SEND_SC2VLT1_SC15_SHIFT 56 +#define SEND_SC2VLT1_SC8_SHIFT 0 +#define SEND_SC2VLT1_SC9_SHIFT 8 +#define SEND_SC2VLT2 (TXE + 0x0000000000C0) +#define SEND_SC2VLT2_SC16_SHIFT 0 +#define SEND_SC2VLT2_SC17_SHIFT 8 +#define SEND_SC2VLT2_SC18_SHIFT 16 +#define SEND_SC2VLT2_SC19_SHIFT 24 +#define SEND_SC2VLT2_SC20_SHIFT 32 +#define SEND_SC2VLT2_SC21_SHIFT 40 +#define SEND_SC2VLT2_SC22_SHIFT 48 +#define SEND_SC2VLT2_SC23_SHIFT 56 +#define SEND_SC2VLT3 (TXE + 0x0000000000C8) +#define SEND_SC2VLT3_SC24_SHIFT 0 +#define SEND_SC2VLT3_SC25_SHIFT 8 +#define SEND_SC2VLT3_SC26_SHIFT 16 +#define SEND_SC2VLT3_SC27_SHIFT 24 +#define SEND_SC2VLT3_SC28_SHIFT 32 +#define SEND_SC2VLT3_SC29_SHIFT 40 +#define SEND_SC2VLT3_SC30_SHIFT 48 +#define SEND_SC2VLT3_SC31_SHIFT 56 +#define SEND_STATIC_RATE_CONTROL (TXE + 0x0000000000A8) +#define SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SHIFT 0 +#define SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SMASK 0xFFFFull +#define PCIE_CFG_REG_PL2 (PCIE + 0x000000000708) +#define PCIE_CFG_REG_PL102 (PCIE + 0x000000000898) +#define PCIE_CFG_REG_PL102_GEN3_EQ_POST_CURSOR_PSET_SHIFT 12 +#define PCIE_CFG_REG_PL102_GEN3_EQ_CURSOR_PSET_SHIFT 6 +#define PCIE_CFG_REG_PL102_GEN3_EQ_PRE_CURSOR_PSET_SHIFT 0 +#define PCIE_CFG_REG_PL103 (PCIE + 0x00000000089C) +#define PCIE_CFG_REG_PL105 (PCIE + 0x0000000008A4) +#define PCIE_CFG_REG_PL105_GEN3_EQ_VIOLATE_COEF_RULES_SMASK 0x1ull +#define PCIE_CFG_REG_PL2_LOW_PWR_ENT_CNT_SHIFT 24 +#define PCIE_CFG_REG_PL100 (PCIE + 0x000000000890) +#define PCIE_CFG_REG_PL100_EQ_EIEOS_CNT_SMASK 0x400ull +#define PCIE_CFG_REG_PL101 (PCIE + 0x000000000894) +#define PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_FS_SHIFT 6 +#define PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_LF_SHIFT 0 +#define PCIE_CFG_REG_PL106 (PCIE + 0x0000000008A8) +#define PCIE_CFG_REG_PL106_GEN3_EQ_PSET_REQ_VEC_SHIFT 8 +#define PCIE_CFG_REG_PL106_GEN3_EQ_EVAL2MS_DISABLE_SMASK 0x20ull +#define PCIE_CFG_REG_PL106_GEN3_EQ_PHASE23_EXIT_MODE_SMASK 0x10ull + +#endif /* DEF_CHIP_REG */ diff --git a/drivers/staging/rdma/hfi1/common.h b/drivers/staging/rdma/hfi1/common.h new file mode 100644 index 000000000000..5f2293729cf9 --- /dev/null +++ b/drivers/staging/rdma/hfi1/common.h @@ -0,0 +1,415 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef _COMMON_H +#define _COMMON_H + +#include <rdma/hfi/hfi1_user.h> + +/* + * This file contains defines, structures, etc. that are used + * to communicate between kernel and user code. + */ + +/* version of protocol header (known to chip also). In the long run, + * we should be able to generate and accept a range of version numbers; + * for now we only accept one, and it's compiled in. + */ +#define IPS_PROTO_VERSION 2 + +/* + * These are compile time constants that you may want to enable or disable + * if you are trying to debug problems with code or performance. + * HFI1_VERBOSE_TRACING define as 1 if you want additional tracing in + * fast path code + * HFI1_TRACE_REGWRITES define as 1 if you want register writes to be + * traced in fast path code + * _HFI1_TRACING define as 0 if you want to remove all tracing in a + * compilation unit + */ + +/* + * If a packet's QP[23:16] bits match this value, then it is + * a PSM packet and the hardware will expect a KDETH header + * following the BTH. + */ +#define DEFAULT_KDETH_QP 0x80 + +/* driver/hw feature set bitmask */ +#define HFI1_CAP_USER_SHIFT 24 +#define HFI1_CAP_MASK ((1UL << HFI1_CAP_USER_SHIFT) - 1) +/* locked flag - if set, only HFI1_CAP_WRITABLE_MASK bits can be set */ +#define HFI1_CAP_LOCKED_SHIFT 63 +#define HFI1_CAP_LOCKED_MASK 0x1ULL +#define HFI1_CAP_LOCKED_SMASK (HFI1_CAP_LOCKED_MASK << HFI1_CAP_LOCKED_SHIFT) +/* extra bits used between kernel and user processes */ +#define HFI1_CAP_MISC_SHIFT (HFI1_CAP_USER_SHIFT * 2) +#define HFI1_CAP_MISC_MASK ((1ULL << (HFI1_CAP_LOCKED_SHIFT - \ + HFI1_CAP_MISC_SHIFT)) - 1) + +#define HFI1_CAP_KSET(cap) ({ hfi1_cap_mask |= HFI1_CAP_##cap; hfi1_cap_mask; }) +#define HFI1_CAP_KCLEAR(cap) \ + ({ \ + hfi1_cap_mask &= ~HFI1_CAP_##cap; \ + hfi1_cap_mask; \ + }) +#define HFI1_CAP_USET(cap) \ + ({ \ + hfi1_cap_mask |= (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ + hfi1_cap_mask; \ + }) +#define HFI1_CAP_UCLEAR(cap) \ + ({ \ + hfi1_cap_mask &= ~(HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ + hfi1_cap_mask; \ + }) +#define HFI1_CAP_SET(cap) \ + ({ \ + hfi1_cap_mask |= (HFI1_CAP_##cap | (HFI1_CAP_##cap << \ + HFI1_CAP_USER_SHIFT)); \ + hfi1_cap_mask; \ + }) +#define HFI1_CAP_CLEAR(cap) \ + ({ \ + hfi1_cap_mask &= ~(HFI1_CAP_##cap | \ + (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT)); \ + hfi1_cap_mask; \ + }) +#define HFI1_CAP_LOCK() \ + ({ hfi1_cap_mask |= HFI1_CAP_LOCKED_SMASK; hfi1_cap_mask; }) +#define HFI1_CAP_LOCKED() (!!(hfi1_cap_mask & HFI1_CAP_LOCKED_SMASK)) +/* + * The set of capability bits that can be changed after initial load + * This set is the same for kernel and user contexts. However, for + * user contexts, the set can be further filtered by using the + * HFI1_CAP_RESERVED_MASK bits. + */ +#define HFI1_CAP_WRITABLE_MASK (HFI1_CAP_SDMA_AHG | \ + HFI1_CAP_HDRSUPP | \ + HFI1_CAP_MULTI_PKT_EGR | \ + HFI1_CAP_NODROP_RHQ_FULL | \ + HFI1_CAP_NODROP_EGR_FULL | \ + HFI1_CAP_ALLOW_PERM_JKEY | \ + HFI1_CAP_STATIC_RATE_CTRL | \ + HFI1_CAP_PRINT_UNIMPL) +/* + * A set of capability bits that are "global" and are not allowed to be + * set in the user bitmask. + */ +#define HFI1_CAP_RESERVED_MASK ((HFI1_CAP_SDMA | \ + HFI1_CAP_USE_SDMA_HEAD | \ + HFI1_CAP_EXTENDED_PSN | \ + HFI1_CAP_PRINT_UNIMPL | \ + HFI1_CAP_QSFP_ENABLED | \ + HFI1_CAP_NO_INTEGRITY | \ + HFI1_CAP_PKEY_CHECK) << \ + HFI1_CAP_USER_SHIFT) +/* + * Set of capabilities that need to be enabled for kernel context in + * order to be allowed for user contexts, as well. + */ +#define HFI1_CAP_MUST_HAVE_KERN (HFI1_CAP_STATIC_RATE_CTRL) +/* Default enabled capabilities (both kernel and user) */ +#define HFI1_CAP_MASK_DEFAULT (HFI1_CAP_HDRSUPP | \ + HFI1_CAP_NODROP_RHQ_FULL | \ + HFI1_CAP_NODROP_EGR_FULL | \ + HFI1_CAP_SDMA | \ + HFI1_CAP_PRINT_UNIMPL | \ + HFI1_CAP_STATIC_RATE_CTRL | \ + HFI1_CAP_QSFP_ENABLED | \ + HFI1_CAP_PKEY_CHECK | \ + HFI1_CAP_MULTI_PKT_EGR | \ + HFI1_CAP_EXTENDED_PSN | \ + ((HFI1_CAP_HDRSUPP | \ + HFI1_CAP_MULTI_PKT_EGR | \ + HFI1_CAP_STATIC_RATE_CTRL | \ + HFI1_CAP_PKEY_CHECK | \ + HFI1_CAP_EARLY_CREDIT_RETURN) << \ + HFI1_CAP_USER_SHIFT)) +/* + * A bitmask of kernel/global capabilities that should be communicated + * to user level processes. + */ +#define HFI1_CAP_K2U (HFI1_CAP_SDMA | \ + HFI1_CAP_EXTENDED_PSN | \ + HFI1_CAP_PKEY_CHECK | \ + HFI1_CAP_NO_INTEGRITY) + +#define HFI1_USER_SWVERSION ((HFI1_USER_SWMAJOR << 16) | HFI1_USER_SWMINOR) + +#ifndef HFI1_KERN_TYPE +#define HFI1_KERN_TYPE 0 +#endif + +/* + * Similarly, this is the kernel version going back to the user. It's + * slightly different, in that we want to tell if the driver was built as + * part of a Intel release, or from the driver from openfabrics.org, + * kernel.org, or a standard distribution, for support reasons. + * The high bit is 0 for non-Intel and 1 for Intel-built/supplied. + * + * It's returned by the driver to the user code during initialization in the + * spi_sw_version field of hfi1_base_info, so the user code can in turn + * check for compatibility with the kernel. +*/ +#define HFI1_KERN_SWVERSION ((HFI1_KERN_TYPE << 31) | HFI1_USER_SWVERSION) + +/* + * Define the driver version number. This is something that refers only + * to the driver itself, not the software interfaces it supports. + */ +#ifndef HFI1_DRIVER_VERSION_BASE +#define HFI1_DRIVER_VERSION_BASE "0.9-248" +#endif + +/* create the final driver version string */ +#ifdef HFI1_IDSTR +#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE " " HFI1_IDSTR +#else +#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE +#endif + +/* + * Diagnostics can send a packet by writing the following + * struct to the diag packet special file. + * + * This allows a custom PBC qword, so that special modes and deliberate + * changes to CRCs can be used. + */ +#define _DIAG_PKT_VERS 1 +struct diag_pkt { + __u16 version; /* structure version */ + __u16 unit; /* which device */ + __u16 sw_index; /* send sw index to use */ + __u16 len; /* data length, in bytes */ + __u16 port; /* port number */ + __u16 unused; + __u32 flags; /* call flags */ + __u64 data; /* user data pointer */ + __u64 pbc; /* PBC for the packet */ +}; + +/* diag_pkt flags */ +#define F_DIAGPKT_WAIT 0x1 /* wait until packet is sent */ + +/* + * The next set of defines are for packet headers, and chip register + * and memory bits that are visible to and/or used by user-mode software. + */ + +/* + * Receive Header Flags + */ +#define RHF_PKT_LEN_SHIFT 0 +#define RHF_PKT_LEN_MASK 0xfffull +#define RHF_PKT_LEN_SMASK (RHF_PKT_LEN_MASK << RHF_PKT_LEN_SHIFT) + +#define RHF_RCV_TYPE_SHIFT 12 +#define RHF_RCV_TYPE_MASK 0x7ull +#define RHF_RCV_TYPE_SMASK (RHF_RCV_TYPE_MASK << RHF_RCV_TYPE_SHIFT) + +#define RHF_USE_EGR_BFR_SHIFT 15 +#define RHF_USE_EGR_BFR_MASK 0x1ull +#define RHF_USE_EGR_BFR_SMASK (RHF_USE_EGR_BFR_MASK << RHF_USE_EGR_BFR_SHIFT) + +#define RHF_EGR_INDEX_SHIFT 16 +#define RHF_EGR_INDEX_MASK 0x7ffull +#define RHF_EGR_INDEX_SMASK (RHF_EGR_INDEX_MASK << RHF_EGR_INDEX_SHIFT) + +#define RHF_DC_INFO_SHIFT 27 +#define RHF_DC_INFO_MASK 0x1ull +#define RHF_DC_INFO_SMASK (RHF_DC_INFO_MASK << RHF_DC_INFO_SHIFT) + +#define RHF_RCV_SEQ_SHIFT 28 +#define RHF_RCV_SEQ_MASK 0xfull +#define RHF_RCV_SEQ_SMASK (RHF_RCV_SEQ_MASK << RHF_RCV_SEQ_SHIFT) + +#define RHF_EGR_OFFSET_SHIFT 32 +#define RHF_EGR_OFFSET_MASK 0xfffull +#define RHF_EGR_OFFSET_SMASK (RHF_EGR_OFFSET_MASK << RHF_EGR_OFFSET_SHIFT) +#define RHF_HDRQ_OFFSET_SHIFT 44 +#define RHF_HDRQ_OFFSET_MASK 0x1ffull +#define RHF_HDRQ_OFFSET_SMASK (RHF_HDRQ_OFFSET_MASK << RHF_HDRQ_OFFSET_SHIFT) +#define RHF_K_HDR_LEN_ERR (0x1ull << 53) +#define RHF_DC_UNC_ERR (0x1ull << 54) +#define RHF_DC_ERR (0x1ull << 55) +#define RHF_RCV_TYPE_ERR_SHIFT 56 +#define RHF_RCV_TYPE_ERR_MASK 0x7ul +#define RHF_RCV_TYPE_ERR_SMASK (RHF_RCV_TYPE_ERR_MASK << RHF_RCV_TYPE_ERR_SHIFT) +#define RHF_TID_ERR (0x1ull << 59) +#define RHF_LEN_ERR (0x1ull << 60) +#define RHF_ECC_ERR (0x1ull << 61) +#define RHF_VCRC_ERR (0x1ull << 62) +#define RHF_ICRC_ERR (0x1ull << 63) + +#define RHF_ERROR_SMASK 0xffe0000000000000ull /* bits 63:53 */ + +/* RHF receive types */ +#define RHF_RCV_TYPE_EXPECTED 0 +#define RHF_RCV_TYPE_EAGER 1 +#define RHF_RCV_TYPE_IB 2 /* normal IB, IB Raw, or IPv6 */ +#define RHF_RCV_TYPE_ERROR 3 +#define RHF_RCV_TYPE_BYPASS 4 +#define RHF_RCV_TYPE_INVALID5 5 +#define RHF_RCV_TYPE_INVALID6 6 +#define RHF_RCV_TYPE_INVALID7 7 + +/* RHF receive type error - expected packet errors */ +#define RHF_RTE_EXPECTED_FLOW_SEQ_ERR 0x2 +#define RHF_RTE_EXPECTED_FLOW_GEN_ERR 0x4 + +/* RHF receive type error - eager packet errors */ +#define RHF_RTE_EAGER_NO_ERR 0x0 + +/* RHF receive type error - IB packet errors */ +#define RHF_RTE_IB_NO_ERR 0x0 + +/* RHF receive type error - error packet errors */ +#define RHF_RTE_ERROR_NO_ERR 0x0 +#define RHF_RTE_ERROR_OP_CODE_ERR 0x1 +#define RHF_RTE_ERROR_KHDR_MIN_LEN_ERR 0x2 +#define RHF_RTE_ERROR_KHDR_HCRC_ERR 0x3 +#define RHF_RTE_ERROR_KHDR_KVER_ERR 0x4 +#define RHF_RTE_ERROR_CONTEXT_ERR 0x5 +#define RHF_RTE_ERROR_KHDR_TID_ERR 0x6 + +/* RHF receive type error - bypass packet errors */ +#define RHF_RTE_BYPASS_NO_ERR 0x0 + +/* + * This structure contains the first field common to all protocols + * that employ this chip. + */ +struct hfi1_message_header { + __be16 lrh[4]; +}; + +/* IB - LRH header constants */ +#define HFI1_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ +#define HFI1_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ + +/* misc. */ +#define SIZE_OF_CRC 1 + +#define LIM_MGMT_P_KEY 0x7FFF +#define FULL_MGMT_P_KEY 0xFFFF + +#define DEFAULT_P_KEY LIM_MGMT_P_KEY +#define HFI1_PERMISSIVE_LID 0xFFFF +#define HFI1_AETH_CREDIT_SHIFT 24 +#define HFI1_AETH_CREDIT_MASK 0x1F +#define HFI1_AETH_CREDIT_INVAL 0x1F +#define HFI1_MSN_MASK 0xFFFFFF +#define HFI1_QPN_MASK 0xFFFFFF +#define HFI1_FECN_SHIFT 31 +#define HFI1_FECN_MASK 1 +#define HFI1_FECN_SMASK (1 << HFI1_FECN_SHIFT) +#define HFI1_BECN_SHIFT 30 +#define HFI1_BECN_MASK 1 +#define HFI1_BECN_SMASK (1 << HFI1_BECN_SHIFT) +#define HFI1_MULTICAST_LID_BASE 0xC000 + +static inline __u64 rhf_to_cpu(const __le32 *rbuf) +{ + return __le64_to_cpu(*((__le64 *)rbuf)); +} + +static inline u64 rhf_err_flags(u64 rhf) +{ + return rhf & RHF_ERROR_SMASK; +} + +static inline u32 rhf_rcv_type(u64 rhf) +{ + return (rhf >> RHF_RCV_TYPE_SHIFT) & RHF_RCV_TYPE_MASK; +} + +static inline u32 rhf_rcv_type_err(u64 rhf) +{ + return (rhf >> RHF_RCV_TYPE_ERR_SHIFT) & RHF_RCV_TYPE_ERR_MASK; +} + +/* return size is in bytes, not DWORDs */ +static inline u32 rhf_pkt_len(u64 rhf) +{ + return ((rhf & RHF_PKT_LEN_SMASK) >> RHF_PKT_LEN_SHIFT) << 2; +} + +static inline u32 rhf_egr_index(u64 rhf) +{ + return (rhf >> RHF_EGR_INDEX_SHIFT) & RHF_EGR_INDEX_MASK; +} + +static inline u32 rhf_rcv_seq(u64 rhf) +{ + return (rhf >> RHF_RCV_SEQ_SHIFT) & RHF_RCV_SEQ_MASK; +} + +/* returned offset is in DWORDS */ +static inline u32 rhf_hdrq_offset(u64 rhf) +{ + return (rhf >> RHF_HDRQ_OFFSET_SHIFT) & RHF_HDRQ_OFFSET_MASK; +} + +static inline u64 rhf_use_egr_bfr(u64 rhf) +{ + return rhf & RHF_USE_EGR_BFR_SMASK; +} + +static inline u64 rhf_dc_info(u64 rhf) +{ + return rhf & RHF_DC_INFO_SMASK; +} + +static inline u32 rhf_egr_buf_offset(u64 rhf) +{ + return (rhf >> RHF_EGR_OFFSET_SHIFT) & RHF_EGR_OFFSET_MASK; +} +#endif /* _COMMON_H */ diff --git a/drivers/staging/rdma/hfi1/cq.c b/drivers/staging/rdma/hfi1/cq.c new file mode 100644 index 000000000000..4f046ffe7e60 --- /dev/null +++ b/drivers/staging/rdma/hfi1/cq.c @@ -0,0 +1,558 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/kthread.h> + +#include "verbs.h" +#include "hfi.h" + +/** + * hfi1_cq_enter - add a new entry to the completion queue + * @cq: completion queue + * @entry: work completion entry to add + * @sig: true if @entry is a solicited entry + * + * This may be called with qp->s_lock held. + */ +void hfi1_cq_enter(struct hfi1_cq *cq, struct ib_wc *entry, int solicited) +{ + struct hfi1_cq_wc *wc; + unsigned long flags; + u32 head; + u32 next; + + spin_lock_irqsave(&cq->lock, flags); + + /* + * Note that the head pointer might be writable by user processes. + * Take care to verify it is a sane value. + */ + wc = cq->queue; + head = wc->head; + if (head >= (unsigned) cq->ibcq.cqe) { + head = cq->ibcq.cqe; + next = 0; + } else + next = head + 1; + if (unlikely(next == wc->tail)) { + spin_unlock_irqrestore(&cq->lock, flags); + if (cq->ibcq.event_handler) { + struct ib_event ev; + + ev.device = cq->ibcq.device; + ev.element.cq = &cq->ibcq; + ev.event = IB_EVENT_CQ_ERR; + cq->ibcq.event_handler(&ev, cq->ibcq.cq_context); + } + return; + } + if (cq->ip) { + wc->uqueue[head].wr_id = entry->wr_id; + wc->uqueue[head].status = entry->status; + wc->uqueue[head].opcode = entry->opcode; + wc->uqueue[head].vendor_err = entry->vendor_err; + wc->uqueue[head].byte_len = entry->byte_len; + wc->uqueue[head].ex.imm_data = + (__u32 __force)entry->ex.imm_data; + wc->uqueue[head].qp_num = entry->qp->qp_num; + wc->uqueue[head].src_qp = entry->src_qp; + wc->uqueue[head].wc_flags = entry->wc_flags; + wc->uqueue[head].pkey_index = entry->pkey_index; + wc->uqueue[head].slid = entry->slid; + wc->uqueue[head].sl = entry->sl; + wc->uqueue[head].dlid_path_bits = entry->dlid_path_bits; + wc->uqueue[head].port_num = entry->port_num; + /* Make sure entry is written before the head index. */ + smp_wmb(); + } else + wc->kqueue[head] = *entry; + wc->head = next; + + if (cq->notify == IB_CQ_NEXT_COMP || + (cq->notify == IB_CQ_SOLICITED && + (solicited || entry->status != IB_WC_SUCCESS))) { + struct kthread_worker *worker; + /* + * This will cause send_complete() to be called in + * another thread. + */ + smp_read_barrier_depends(); /* see hfi1_cq_exit */ + worker = cq->dd->worker; + if (likely(worker)) { + cq->notify = IB_CQ_NONE; + cq->triggered++; + queue_kthread_work(worker, &cq->comptask); + } + } + + spin_unlock_irqrestore(&cq->lock, flags); +} + +/** + * hfi1_poll_cq - poll for work completion entries + * @ibcq: the completion queue to poll + * @num_entries: the maximum number of entries to return + * @entry: pointer to array where work completions are placed + * + * Returns the number of completion entries polled. + * + * This may be called from interrupt context. Also called by ib_poll_cq() + * in the generic verbs code. + */ +int hfi1_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) +{ + struct hfi1_cq *cq = to_icq(ibcq); + struct hfi1_cq_wc *wc; + unsigned long flags; + int npolled; + u32 tail; + + /* The kernel can only poll a kernel completion queue */ + if (cq->ip) { + npolled = -EINVAL; + goto bail; + } + + spin_lock_irqsave(&cq->lock, flags); + + wc = cq->queue; + tail = wc->tail; + if (tail > (u32) cq->ibcq.cqe) + tail = (u32) cq->ibcq.cqe; + for (npolled = 0; npolled < num_entries; ++npolled, ++entry) { + if (tail == wc->head) + break; + /* The kernel doesn't need a RMB since it has the lock. */ + *entry = wc->kqueue[tail]; + if (tail >= cq->ibcq.cqe) + tail = 0; + else + tail++; + } + wc->tail = tail; + + spin_unlock_irqrestore(&cq->lock, flags); + +bail: + return npolled; +} + +static void send_complete(struct kthread_work *work) +{ + struct hfi1_cq *cq = container_of(work, struct hfi1_cq, comptask); + + /* + * The completion handler will most likely rearm the notification + * and poll for all pending entries. If a new completion entry + * is added while we are in this routine, queue_work() + * won't call us again until we return so we check triggered to + * see if we need to call the handler again. + */ + for (;;) { + u8 triggered = cq->triggered; + + /* + * IPoIB connected mode assumes the callback is from a + * soft IRQ. We simulate this by blocking "bottom halves". + * See the implementation for ipoib_cm_handle_tx_wc(), + * netif_tx_lock_bh() and netif_tx_lock(). + */ + local_bh_disable(); + cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context); + local_bh_enable(); + + if (cq->triggered == triggered) + return; + } +} + +/** + * hfi1_create_cq - create a completion queue + * @ibdev: the device this completion queue is attached to + * @attr: creation attributes + * @context: unused by the driver + * @udata: user data for libibverbs.so + * + * Returns a pointer to the completion queue or negative errno values + * for failure. + * + * Called by ib_create_cq() in the generic verbs code. + */ +struct ib_cq *hfi1_create_cq( + struct ib_device *ibdev, + const struct ib_cq_init_attr *attr, + struct ib_ucontext *context, + struct ib_udata *udata) +{ + struct hfi1_ibdev *dev = to_idev(ibdev); + struct hfi1_cq *cq; + struct hfi1_cq_wc *wc; + struct ib_cq *ret; + u32 sz; + unsigned int entries = attr->cqe; + + if (attr->flags) + return ERR_PTR(-EINVAL); + + if (entries < 1 || entries > hfi1_max_cqes) + return ERR_PTR(-EINVAL); + + /* Allocate the completion queue structure. */ + cq = kmalloc(sizeof(*cq), GFP_KERNEL); + if (!cq) + return ERR_PTR(-ENOMEM); + + /* + * Allocate the completion queue entries and head/tail pointers. + * This is allocated separately so that it can be resized and + * also mapped into user space. + * We need to use vmalloc() in order to support mmap and large + * numbers of entries. + */ + sz = sizeof(*wc); + if (udata && udata->outlen >= sizeof(__u64)) + sz += sizeof(struct ib_uverbs_wc) * (entries + 1); + else + sz += sizeof(struct ib_wc) * (entries + 1); + wc = vmalloc_user(sz); + if (!wc) { + ret = ERR_PTR(-ENOMEM); + goto bail_cq; + } + + /* + * Return the address of the WC as the offset to mmap. + * See hfi1_mmap() for details. + */ + if (udata && udata->outlen >= sizeof(__u64)) { + int err; + + cq->ip = hfi1_create_mmap_info(dev, sz, context, wc); + if (!cq->ip) { + ret = ERR_PTR(-ENOMEM); + goto bail_wc; + } + + err = ib_copy_to_udata(udata, &cq->ip->offset, + sizeof(cq->ip->offset)); + if (err) { + ret = ERR_PTR(err); + goto bail_ip; + } + } else + cq->ip = NULL; + + spin_lock(&dev->n_cqs_lock); + if (dev->n_cqs_allocated == hfi1_max_cqs) { + spin_unlock(&dev->n_cqs_lock); + ret = ERR_PTR(-ENOMEM); + goto bail_ip; + } + + dev->n_cqs_allocated++; + spin_unlock(&dev->n_cqs_lock); + + if (cq->ip) { + spin_lock_irq(&dev->pending_lock); + list_add(&cq->ip->pending_mmaps, &dev->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + } + + /* + * ib_create_cq() will initialize cq->ibcq except for cq->ibcq.cqe. + * The number of entries should be >= the number requested or return + * an error. + */ + cq->dd = dd_from_dev(dev); + cq->ibcq.cqe = entries; + cq->notify = IB_CQ_NONE; + cq->triggered = 0; + spin_lock_init(&cq->lock); + init_kthread_work(&cq->comptask, send_complete); + wc->head = 0; + wc->tail = 0; + cq->queue = wc; + + ret = &cq->ibcq; + + goto done; + +bail_ip: + kfree(cq->ip); +bail_wc: + vfree(wc); +bail_cq: + kfree(cq); +done: + return ret; +} + +/** + * hfi1_destroy_cq - destroy a completion queue + * @ibcq: the completion queue to destroy. + * + * Returns 0 for success. + * + * Called by ib_destroy_cq() in the generic verbs code. + */ +int hfi1_destroy_cq(struct ib_cq *ibcq) +{ + struct hfi1_ibdev *dev = to_idev(ibcq->device); + struct hfi1_cq *cq = to_icq(ibcq); + + flush_kthread_work(&cq->comptask); + spin_lock(&dev->n_cqs_lock); + dev->n_cqs_allocated--; + spin_unlock(&dev->n_cqs_lock); + if (cq->ip) + kref_put(&cq->ip->ref, hfi1_release_mmap_info); + else + vfree(cq->queue); + kfree(cq); + + return 0; +} + +/** + * hfi1_req_notify_cq - change the notification type for a completion queue + * @ibcq: the completion queue + * @notify_flags: the type of notification to request + * + * Returns 0 for success. + * + * This may be called from interrupt context. Also called by + * ib_req_notify_cq() in the generic verbs code. + */ +int hfi1_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags) +{ + struct hfi1_cq *cq = to_icq(ibcq); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&cq->lock, flags); + /* + * Don't change IB_CQ_NEXT_COMP to IB_CQ_SOLICITED but allow + * any other transitions (see C11-31 and C11-32 in ch. 11.4.2.2). + */ + if (cq->notify != IB_CQ_NEXT_COMP) + cq->notify = notify_flags & IB_CQ_SOLICITED_MASK; + + if ((notify_flags & IB_CQ_REPORT_MISSED_EVENTS) && + cq->queue->head != cq->queue->tail) + ret = 1; + + spin_unlock_irqrestore(&cq->lock, flags); + + return ret; +} + +/** + * hfi1_resize_cq - change the size of the CQ + * @ibcq: the completion queue + * + * Returns 0 for success. + */ +int hfi1_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata) +{ + struct hfi1_cq *cq = to_icq(ibcq); + struct hfi1_cq_wc *old_wc; + struct hfi1_cq_wc *wc; + u32 head, tail, n; + int ret; + u32 sz; + + if (cqe < 1 || cqe > hfi1_max_cqes) { + ret = -EINVAL; + goto bail; + } + + /* + * Need to use vmalloc() if we want to support large #s of entries. + */ + sz = sizeof(*wc); + if (udata && udata->outlen >= sizeof(__u64)) + sz += sizeof(struct ib_uverbs_wc) * (cqe + 1); + else + sz += sizeof(struct ib_wc) * (cqe + 1); + wc = vmalloc_user(sz); + if (!wc) { + ret = -ENOMEM; + goto bail; + } + + /* Check that we can write the offset to mmap. */ + if (udata && udata->outlen >= sizeof(__u64)) { + __u64 offset = 0; + + ret = ib_copy_to_udata(udata, &offset, sizeof(offset)); + if (ret) + goto bail_free; + } + + spin_lock_irq(&cq->lock); + /* + * Make sure head and tail are sane since they + * might be user writable. + */ + old_wc = cq->queue; + head = old_wc->head; + if (head > (u32) cq->ibcq.cqe) + head = (u32) cq->ibcq.cqe; + tail = old_wc->tail; + if (tail > (u32) cq->ibcq.cqe) + tail = (u32) cq->ibcq.cqe; + if (head < tail) + n = cq->ibcq.cqe + 1 + head - tail; + else + n = head - tail; + if (unlikely((u32)cqe < n)) { + ret = -EINVAL; + goto bail_unlock; + } + for (n = 0; tail != head; n++) { + if (cq->ip) + wc->uqueue[n] = old_wc->uqueue[tail]; + else + wc->kqueue[n] = old_wc->kqueue[tail]; + if (tail == (u32) cq->ibcq.cqe) + tail = 0; + else + tail++; + } + cq->ibcq.cqe = cqe; + wc->head = n; + wc->tail = 0; + cq->queue = wc; + spin_unlock_irq(&cq->lock); + + vfree(old_wc); + + if (cq->ip) { + struct hfi1_ibdev *dev = to_idev(ibcq->device); + struct hfi1_mmap_info *ip = cq->ip; + + hfi1_update_mmap_info(dev, ip, sz, wc); + + /* + * Return the offset to mmap. + * See hfi1_mmap() for details. + */ + if (udata && udata->outlen >= sizeof(__u64)) { + ret = ib_copy_to_udata(udata, &ip->offset, + sizeof(ip->offset)); + if (ret) + goto bail; + } + + spin_lock_irq(&dev->pending_lock); + if (list_empty(&ip->pending_mmaps)) + list_add(&ip->pending_mmaps, &dev->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + } + + ret = 0; + goto bail; + +bail_unlock: + spin_unlock_irq(&cq->lock); +bail_free: + vfree(wc); +bail: + return ret; +} + +int hfi1_cq_init(struct hfi1_devdata *dd) +{ + int ret = 0; + int cpu; + struct task_struct *task; + + if (dd->worker) + return 0; + dd->worker = kzalloc(sizeof(*dd->worker), GFP_KERNEL); + if (!dd->worker) + return -ENOMEM; + init_kthread_worker(dd->worker); + task = kthread_create_on_node( + kthread_worker_fn, + dd->worker, + dd->assigned_node_id, + "hfi1_cq%d", dd->unit); + if (IS_ERR(task)) + goto task_fail; + cpu = cpumask_first(cpumask_of_node(dd->assigned_node_id)); + kthread_bind(task, cpu); + wake_up_process(task); +out: + return ret; +task_fail: + ret = PTR_ERR(task); + kfree(dd->worker); + dd->worker = NULL; + goto out; +} + +void hfi1_cq_exit(struct hfi1_devdata *dd) +{ + struct kthread_worker *worker; + + worker = dd->worker; + if (!worker) + return; + /* blocks future queuing from send_complete() */ + dd->worker = NULL; + smp_wmb(); /* See hfi1_cq_enter */ + flush_kthread_worker(worker); + kthread_stop(worker->task); + kfree(worker); +} diff --git a/drivers/staging/rdma/hfi1/debugfs.c b/drivers/staging/rdma/hfi1/debugfs.c new file mode 100644 index 000000000000..acd2269e9f14 --- /dev/null +++ b/drivers/staging/rdma/hfi1/debugfs.c @@ -0,0 +1,899 @@ +#ifdef CONFIG_DEBUG_FS +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/kernel.h> +#include <linux/export.h> + +#include "hfi.h" +#include "debugfs.h" +#include "device.h" +#include "qp.h" +#include "sdma.h" + +static struct dentry *hfi1_dbg_root; + +#define private2dd(file) (file_inode(file)->i_private) +#define private2ppd(file) (file_inode(file)->i_private) + +#define DEBUGFS_SEQ_FILE_OPS(name) \ +static const struct seq_operations _##name##_seq_ops = { \ + .start = _##name##_seq_start, \ + .next = _##name##_seq_next, \ + .stop = _##name##_seq_stop, \ + .show = _##name##_seq_show \ +} +#define DEBUGFS_SEQ_FILE_OPEN(name) \ +static int _##name##_open(struct inode *inode, struct file *s) \ +{ \ + struct seq_file *seq; \ + int ret; \ + ret = seq_open(s, &_##name##_seq_ops); \ + if (ret) \ + return ret; \ + seq = s->private_data; \ + seq->private = inode->i_private; \ + return 0; \ +} + +#define DEBUGFS_FILE_OPS(name) \ +static const struct file_operations _##name##_file_ops = { \ + .owner = THIS_MODULE, \ + .open = _##name##_open, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = seq_release \ +} + +#define DEBUGFS_FILE_CREATE(name, parent, data, ops, mode) \ +do { \ + struct dentry *ent; \ + ent = debugfs_create_file(name, mode, parent, \ + data, ops); \ + if (!ent) \ + pr_warn("create of %s failed\n", name); \ +} while (0) + + +#define DEBUGFS_SEQ_FILE_CREATE(name, parent, data) \ + DEBUGFS_FILE_CREATE(#name, parent, data, &_##name##_file_ops, S_IRUGO) + +static void *_opcode_stats_seq_start(struct seq_file *s, loff_t *pos) +__acquires(RCU) +{ + struct hfi1_opcode_stats_perctx *opstats; + + rcu_read_lock(); + if (*pos >= ARRAY_SIZE(opstats->stats)) + return NULL; + return pos; +} + +static void *_opcode_stats_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + struct hfi1_opcode_stats_perctx *opstats; + + ++*pos; + if (*pos >= ARRAY_SIZE(opstats->stats)) + return NULL; + return pos; +} + + +static void _opcode_stats_seq_stop(struct seq_file *s, void *v) +__releases(RCU) +{ + rcu_read_unlock(); +} + +static int _opcode_stats_seq_show(struct seq_file *s, void *v) +{ + loff_t *spos = v; + loff_t i = *spos, j; + u64 n_packets = 0, n_bytes = 0; + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + + for (j = 0; j < dd->first_user_ctxt; j++) { + if (!dd->rcd[j]) + continue; + n_packets += dd->rcd[j]->opstats->stats[i].n_packets; + n_bytes += dd->rcd[j]->opstats->stats[i].n_bytes; + } + if (!n_packets && !n_bytes) + return SEQ_SKIP; + seq_printf(s, "%02llx %llu/%llu\n", i, + (unsigned long long) n_packets, + (unsigned long long) n_bytes); + + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(opcode_stats); +DEBUGFS_SEQ_FILE_OPEN(opcode_stats) +DEBUGFS_FILE_OPS(opcode_stats); + +static void *_ctx_stats_seq_start(struct seq_file *s, loff_t *pos) +{ + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + + if (!*pos) + return SEQ_START_TOKEN; + if (*pos >= dd->first_user_ctxt) + return NULL; + return pos; +} + +static void *_ctx_stats_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + + if (v == SEQ_START_TOKEN) + return pos; + + ++*pos; + if (*pos >= dd->first_user_ctxt) + return NULL; + return pos; +} + +static void _ctx_stats_seq_stop(struct seq_file *s, void *v) +{ + /* nothing allocated */ +} + +static int _ctx_stats_seq_show(struct seq_file *s, void *v) +{ + loff_t *spos; + loff_t i, j; + u64 n_packets = 0; + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + + if (v == SEQ_START_TOKEN) { + seq_puts(s, "Ctx:npkts\n"); + return 0; + } + + spos = v; + i = *spos; + + if (!dd->rcd[i]) + return SEQ_SKIP; + + for (j = 0; j < ARRAY_SIZE(dd->rcd[i]->opstats->stats); j++) + n_packets += dd->rcd[i]->opstats->stats[j].n_packets; + + if (!n_packets) + return SEQ_SKIP; + + seq_printf(s, " %llu:%llu\n", i, n_packets); + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(ctx_stats); +DEBUGFS_SEQ_FILE_OPEN(ctx_stats) +DEBUGFS_FILE_OPS(ctx_stats); + +static void *_qp_stats_seq_start(struct seq_file *s, loff_t *pos) +__acquires(RCU) +{ + struct qp_iter *iter; + loff_t n = *pos; + + rcu_read_lock(); + iter = qp_iter_init(s->private); + if (!iter) + return NULL; + + while (n--) { + if (qp_iter_next(iter)) { + kfree(iter); + return NULL; + } + } + + return iter; +} + +static void *_qp_stats_seq_next(struct seq_file *s, void *iter_ptr, + loff_t *pos) +{ + struct qp_iter *iter = iter_ptr; + + (*pos)++; + + if (qp_iter_next(iter)) { + kfree(iter); + return NULL; + } + + return iter; +} + +static void _qp_stats_seq_stop(struct seq_file *s, void *iter_ptr) +__releases(RCU) +{ + rcu_read_unlock(); +} + +static int _qp_stats_seq_show(struct seq_file *s, void *iter_ptr) +{ + struct qp_iter *iter = iter_ptr; + + if (!iter) + return 0; + + qp_iter_print(s, iter); + + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(qp_stats); +DEBUGFS_SEQ_FILE_OPEN(qp_stats) +DEBUGFS_FILE_OPS(qp_stats); + +static void *_sdes_seq_start(struct seq_file *s, loff_t *pos) +__acquires(RCU) +{ + struct hfi1_ibdev *ibd; + struct hfi1_devdata *dd; + + rcu_read_lock(); + ibd = (struct hfi1_ibdev *)s->private; + dd = dd_from_dev(ibd); + if (!dd->per_sdma || *pos >= dd->num_sdma) + return NULL; + return pos; +} + +static void *_sdes_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + + ++*pos; + if (!dd->per_sdma || *pos >= dd->num_sdma) + return NULL; + return pos; +} + + +static void _sdes_seq_stop(struct seq_file *s, void *v) +__releases(RCU) +{ + rcu_read_unlock(); +} + +static int _sdes_seq_show(struct seq_file *s, void *v) +{ + struct hfi1_ibdev *ibd = (struct hfi1_ibdev *)s->private; + struct hfi1_devdata *dd = dd_from_dev(ibd); + loff_t *spos = v; + loff_t i = *spos; + + sdma_seqfile_dump_sde(s, &dd->per_sdma[i]); + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(sdes); +DEBUGFS_SEQ_FILE_OPEN(sdes) +DEBUGFS_FILE_OPS(sdes); + +/* read the per-device counters */ +static ssize_t dev_counters_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + u64 *counters; + size_t avail; + struct hfi1_devdata *dd; + ssize_t rval; + + rcu_read_lock(); + dd = private2dd(file); + avail = hfi1_read_cntrs(dd, *ppos, NULL, &counters); + rval = simple_read_from_buffer(buf, count, ppos, counters, avail); + rcu_read_unlock(); + return rval; +} + +/* read the per-device counters */ +static ssize_t dev_names_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + char *names; + size_t avail; + struct hfi1_devdata *dd; + ssize_t rval; + + rcu_read_lock(); + dd = private2dd(file); + avail = hfi1_read_cntrs(dd, *ppos, &names, NULL); + rval = simple_read_from_buffer(buf, count, ppos, names, avail); + rcu_read_unlock(); + return rval; +} + +struct counter_info { + char *name; + const struct file_operations ops; +}; + +/* + * Could use file_inode(file)->i_ino to figure out which file, + * instead of separate routine for each, but for now, this works... + */ + +/* read the per-port names (same for each port) */ +static ssize_t portnames_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + char *names; + size_t avail; + struct hfi1_devdata *dd; + ssize_t rval; + + rcu_read_lock(); + dd = private2dd(file); + /* port number n/a here since names are constant */ + avail = hfi1_read_portcntrs(dd, *ppos, 0, &names, NULL); + rval = simple_read_from_buffer(buf, count, ppos, names, avail); + rcu_read_unlock(); + return rval; +} + +/* read the per-port counters */ +static ssize_t portcntrs_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + u64 *counters; + size_t avail; + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + ssize_t rval; + + rcu_read_lock(); + ppd = private2ppd(file); + dd = ppd->dd; + avail = hfi1_read_portcntrs(dd, *ppos, ppd->port - 1, NULL, &counters); + rval = simple_read_from_buffer(buf, count, ppos, counters, avail); + rcu_read_unlock(); + return rval; +} + +/* + * read the per-port QSFP data for ppd + */ +static ssize_t qsfp_debugfs_dump(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct hfi1_pportdata *ppd; + char *tmp; + int ret; + + rcu_read_lock(); + ppd = private2ppd(file); + tmp = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!tmp) { + rcu_read_unlock(); + return -ENOMEM; + } + + ret = qsfp_dump(ppd, tmp, PAGE_SIZE); + if (ret > 0) + ret = simple_read_from_buffer(buf, count, ppos, tmp, ret); + rcu_read_unlock(); + kfree(tmp); + return ret; +} + +/* Do an i2c write operation on the chain for the given HFI. */ +static ssize_t __i2c_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos, u32 target) +{ + struct hfi1_pportdata *ppd; + char *buff; + int ret; + int i2c_addr; + int offset; + int total_written; + + rcu_read_lock(); + ppd = private2ppd(file); + + buff = kmalloc(count, GFP_KERNEL); + if (!buff) { + ret = -ENOMEM; + goto _return; + } + + ret = copy_from_user(buff, buf, count); + if (ret > 0) { + ret = -EFAULT; + goto _free; + } + + i2c_addr = (*ppos >> 16) & 0xff; + offset = *ppos & 0xffff; + + total_written = i2c_write(ppd, target, i2c_addr, offset, buff, count); + if (total_written < 0) { + ret = total_written; + goto _free; + } + + *ppos += total_written; + + ret = total_written; + + _free: + kfree(buff); + _return: + rcu_read_unlock(); + return ret; +} + +/* Do an i2c write operation on chain for HFI 0. */ +static ssize_t i2c1_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + return __i2c_debugfs_write(file, buf, count, ppos, 0); +} + +/* Do an i2c write operation on chain for HFI 1. */ +static ssize_t i2c2_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + return __i2c_debugfs_write(file, buf, count, ppos, 1); +} + +/* Do an i2c read operation on the chain for the given HFI. */ +static ssize_t __i2c_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos, u32 target) +{ + struct hfi1_pportdata *ppd; + char *buff; + int ret; + int i2c_addr; + int offset; + int total_read; + + rcu_read_lock(); + ppd = private2ppd(file); + + buff = kmalloc(count, GFP_KERNEL); + if (!buff) { + ret = -ENOMEM; + goto _return; + } + + i2c_addr = (*ppos >> 16) & 0xff; + offset = *ppos & 0xffff; + + total_read = i2c_read(ppd, target, i2c_addr, offset, buff, count); + if (total_read < 0) { + ret = total_read; + goto _free; + } + + *ppos += total_read; + + ret = copy_to_user(buf, buff, total_read); + if (ret > 0) { + ret = -EFAULT; + goto _free; + } + + ret = total_read; + + _free: + kfree(buff); + _return: + rcu_read_unlock(); + return ret; +} + +/* Do an i2c read operation on chain for HFI 0. */ +static ssize_t i2c1_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + return __i2c_debugfs_read(file, buf, count, ppos, 0); +} + +/* Do an i2c read operation on chain for HFI 1. */ +static ssize_t i2c2_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + return __i2c_debugfs_read(file, buf, count, ppos, 1); +} + +/* Do a QSFP write operation on the i2c chain for the given HFI. */ +static ssize_t __qsfp_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos, u32 target) +{ + struct hfi1_pportdata *ppd; + char *buff; + int ret; + int total_written; + + rcu_read_lock(); + if (*ppos + count > QSFP_PAGESIZE * 4) { /* base page + page00-page03 */ + ret = -EINVAL; + goto _return; + } + + ppd = private2ppd(file); + + buff = kmalloc(count, GFP_KERNEL); + if (!buff) { + ret = -ENOMEM; + goto _return; + } + + ret = copy_from_user(buff, buf, count); + if (ret > 0) { + ret = -EFAULT; + goto _free; + } + + total_written = qsfp_write(ppd, target, *ppos, buff, count); + if (total_written < 0) { + ret = total_written; + goto _free; + } + + *ppos += total_written; + + ret = total_written; + + _free: + kfree(buff); + _return: + rcu_read_unlock(); + return ret; +} + +/* Do a QSFP write operation on i2c chain for HFI 0. */ +static ssize_t qsfp1_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + return __qsfp_debugfs_write(file, buf, count, ppos, 0); +} + +/* Do a QSFP write operation on i2c chain for HFI 1. */ +static ssize_t qsfp2_debugfs_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + return __qsfp_debugfs_write(file, buf, count, ppos, 1); +} + +/* Do a QSFP read operation on the i2c chain for the given HFI. */ +static ssize_t __qsfp_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos, u32 target) +{ + struct hfi1_pportdata *ppd; + char *buff; + int ret; + int total_read; + + rcu_read_lock(); + if (*ppos + count > QSFP_PAGESIZE * 4) { /* base page + page00-page03 */ + ret = -EINVAL; + goto _return; + } + + ppd = private2ppd(file); + + buff = kmalloc(count, GFP_KERNEL); + if (!buff) { + ret = -ENOMEM; + goto _return; + } + + total_read = qsfp_read(ppd, target, *ppos, buff, count); + if (total_read < 0) { + ret = total_read; + goto _free; + } + + *ppos += total_read; + + ret = copy_to_user(buf, buff, total_read); + if (ret > 0) { + ret = -EFAULT; + goto _free; + } + + ret = total_read; + + _free: + kfree(buff); + _return: + rcu_read_unlock(); + return ret; +} + +/* Do a QSFP read operation on i2c chain for HFI 0. */ +static ssize_t qsfp1_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + return __qsfp_debugfs_read(file, buf, count, ppos, 0); +} + +/* Do a QSFP read operation on i2c chain for HFI 1. */ +static ssize_t qsfp2_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + return __qsfp_debugfs_read(file, buf, count, ppos, 1); +} + +#define DEBUGFS_OPS(nm, readroutine, writeroutine) \ +{ \ + .name = nm, \ + .ops = { \ + .read = readroutine, \ + .write = writeroutine, \ + .llseek = generic_file_llseek, \ + }, \ +} + +static const struct counter_info cntr_ops[] = { + DEBUGFS_OPS("counter_names", dev_names_read, NULL), + DEBUGFS_OPS("counters", dev_counters_read, NULL), + DEBUGFS_OPS("portcounter_names", portnames_read, NULL), +}; + +static const struct counter_info port_cntr_ops[] = { + DEBUGFS_OPS("port%dcounters", portcntrs_debugfs_read, NULL), + DEBUGFS_OPS("i2c1", i2c1_debugfs_read, i2c1_debugfs_write), + DEBUGFS_OPS("i2c2", i2c2_debugfs_read, i2c2_debugfs_write), + DEBUGFS_OPS("qsfp_dump%d", qsfp_debugfs_dump, NULL), + DEBUGFS_OPS("qsfp1", qsfp1_debugfs_read, qsfp1_debugfs_write), + DEBUGFS_OPS("qsfp2", qsfp2_debugfs_read, qsfp2_debugfs_write), +}; + +void hfi1_dbg_ibdev_init(struct hfi1_ibdev *ibd) +{ + char name[sizeof("port0counters") + 1]; + char link[10]; + struct hfi1_devdata *dd = dd_from_dev(ibd); + struct hfi1_pportdata *ppd; + int unit = dd->unit; + int i, j; + + if (!hfi1_dbg_root) + return; + snprintf(name, sizeof(name), "%s_%d", class_name(), unit); + snprintf(link, sizeof(link), "%d", unit); + ibd->hfi1_ibdev_dbg = debugfs_create_dir(name, hfi1_dbg_root); + if (!ibd->hfi1_ibdev_dbg) { + pr_warn("create of %s failed\n", name); + return; + } + ibd->hfi1_ibdev_link = + debugfs_create_symlink(link, hfi1_dbg_root, name); + if (!ibd->hfi1_ibdev_link) { + pr_warn("create of %s symlink failed\n", name); + return; + } + DEBUGFS_SEQ_FILE_CREATE(opcode_stats, ibd->hfi1_ibdev_dbg, ibd); + DEBUGFS_SEQ_FILE_CREATE(ctx_stats, ibd->hfi1_ibdev_dbg, ibd); + DEBUGFS_SEQ_FILE_CREATE(qp_stats, ibd->hfi1_ibdev_dbg, ibd); + DEBUGFS_SEQ_FILE_CREATE(sdes, ibd->hfi1_ibdev_dbg, ibd); + /* dev counter files */ + for (i = 0; i < ARRAY_SIZE(cntr_ops); i++) + DEBUGFS_FILE_CREATE(cntr_ops[i].name, + ibd->hfi1_ibdev_dbg, + dd, + &cntr_ops[i].ops, S_IRUGO); + /* per port files */ + for (ppd = dd->pport, j = 0; j < dd->num_pports; j++, ppd++) + for (i = 0; i < ARRAY_SIZE(port_cntr_ops); i++) { + snprintf(name, + sizeof(name), + port_cntr_ops[i].name, + j + 1); + DEBUGFS_FILE_CREATE(name, + ibd->hfi1_ibdev_dbg, + ppd, + &port_cntr_ops[i].ops, + port_cntr_ops[i].ops.write == NULL ? + S_IRUGO : S_IRUGO|S_IWUSR); + } +} + +void hfi1_dbg_ibdev_exit(struct hfi1_ibdev *ibd) +{ + if (!hfi1_dbg_root) + goto out; + debugfs_remove(ibd->hfi1_ibdev_link); + debugfs_remove_recursive(ibd->hfi1_ibdev_dbg); +out: + ibd->hfi1_ibdev_dbg = NULL; + synchronize_rcu(); +} + +/* + * driver stats field names, one line per stat, single string. Used by + * programs like hfistats to print the stats in a way which works for + * different versions of drivers, without changing program source. + * if hfi1_ib_stats changes, this needs to change. Names need to be + * 12 chars or less (w/o newline), for proper display by hfistats utility. + */ +static const char * const hfi1_statnames[] = { + /* must be element 0*/ + "KernIntr", + "ErrorIntr", + "Tx_Errs", + "Rcv_Errs", + "H/W_Errs", + "NoPIOBufs", + "CtxtsOpen", + "RcvLen_Errs", + "EgrBufFull", + "EgrHdrFull" +}; + +static void *_driver_stats_names_seq_start(struct seq_file *s, loff_t *pos) +__acquires(RCU) +{ + rcu_read_lock(); + if (*pos >= ARRAY_SIZE(hfi1_statnames)) + return NULL; + return pos; +} + +static void *_driver_stats_names_seq_next( + struct seq_file *s, + void *v, + loff_t *pos) +{ + ++*pos; + if (*pos >= ARRAY_SIZE(hfi1_statnames)) + return NULL; + return pos; +} + +static void _driver_stats_names_seq_stop(struct seq_file *s, void *v) +__releases(RCU) +{ + rcu_read_unlock(); +} + +static int _driver_stats_names_seq_show(struct seq_file *s, void *v) +{ + loff_t *spos = v; + + seq_printf(s, "%s\n", hfi1_statnames[*spos]); + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(driver_stats_names); +DEBUGFS_SEQ_FILE_OPEN(driver_stats_names) +DEBUGFS_FILE_OPS(driver_stats_names); + +static void *_driver_stats_seq_start(struct seq_file *s, loff_t *pos) +__acquires(RCU) +{ + rcu_read_lock(); + if (*pos >= ARRAY_SIZE(hfi1_statnames)) + return NULL; + return pos; +} + +static void *_driver_stats_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + ++*pos; + if (*pos >= ARRAY_SIZE(hfi1_statnames)) + return NULL; + return pos; +} + +static void _driver_stats_seq_stop(struct seq_file *s, void *v) +__releases(RCU) +{ + rcu_read_unlock(); +} + +static u64 hfi1_sps_ints(void) +{ + unsigned long flags; + struct hfi1_devdata *dd; + u64 sps_ints = 0; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + list_for_each_entry(dd, &hfi1_dev_list, list) { + sps_ints += get_all_cpu_total(dd->int_counter); + } + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + return sps_ints; +} + +static int _driver_stats_seq_show(struct seq_file *s, void *v) +{ + loff_t *spos = v; + char *buffer; + u64 *stats = (u64 *)&hfi1_stats; + size_t sz = seq_get_buf(s, &buffer); + + if (sz < sizeof(u64)) + return SEQ_SKIP; + /* special case for interrupts */ + if (*spos == 0) + *(u64 *)buffer = hfi1_sps_ints(); + else + *(u64 *)buffer = stats[*spos]; + seq_commit(s, sizeof(u64)); + return 0; +} + +DEBUGFS_SEQ_FILE_OPS(driver_stats); +DEBUGFS_SEQ_FILE_OPEN(driver_stats) +DEBUGFS_FILE_OPS(driver_stats); + +void hfi1_dbg_init(void) +{ + hfi1_dbg_root = debugfs_create_dir(DRIVER_NAME, NULL); + if (!hfi1_dbg_root) + pr_warn("init of debugfs failed\n"); + DEBUGFS_SEQ_FILE_CREATE(driver_stats_names, hfi1_dbg_root, NULL); + DEBUGFS_SEQ_FILE_CREATE(driver_stats, hfi1_dbg_root, NULL); +} + +void hfi1_dbg_exit(void) +{ + debugfs_remove_recursive(hfi1_dbg_root); + hfi1_dbg_root = NULL; +} + +#endif diff --git a/drivers/staging/rdma/hfi1/debugfs.h b/drivers/staging/rdma/hfi1/debugfs.h new file mode 100644 index 000000000000..92d6fe146714 --- /dev/null +++ b/drivers/staging/rdma/hfi1/debugfs.h @@ -0,0 +1,78 @@ +#ifndef _HFI1_DEBUGFS_H +#define _HFI1_DEBUGFS_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +struct hfi1_ibdev; +#ifdef CONFIG_DEBUG_FS +void hfi1_dbg_ibdev_init(struct hfi1_ibdev *ibd); +void hfi1_dbg_ibdev_exit(struct hfi1_ibdev *ibd); +void hfi1_dbg_init(void); +void hfi1_dbg_exit(void); +#else +static inline void hfi1_dbg_ibdev_init(struct hfi1_ibdev *ibd) +{ +} + +void hfi1_dbg_ibdev_exit(struct hfi1_ibdev *ibd) +{ +} + +void hfi1_dbg_init(void) +{ +} + +void hfi1_dbg_exit(void) +{ +} + +#endif + +#endif /* _HFI1_DEBUGFS_H */ diff --git a/drivers/staging/rdma/hfi1/device.c b/drivers/staging/rdma/hfi1/device.c new file mode 100644 index 000000000000..07c87a87775f --- /dev/null +++ b/drivers/staging/rdma/hfi1/device.c @@ -0,0 +1,142 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/cdev.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/fs.h> + +#include "hfi.h" +#include "device.h" + +static struct class *class; +static dev_t hfi1_dev; + +int hfi1_cdev_init(int minor, const char *name, + const struct file_operations *fops, + struct cdev *cdev, struct device **devp) +{ + const dev_t dev = MKDEV(MAJOR(hfi1_dev), minor); + struct device *device = NULL; + int ret; + + cdev_init(cdev, fops); + cdev->owner = THIS_MODULE; + kobject_set_name(&cdev->kobj, name); + + ret = cdev_add(cdev, dev, 1); + if (ret < 0) { + pr_err("Could not add cdev for minor %d, %s (err %d)\n", + minor, name, -ret); + goto done; + } + + device = device_create(class, NULL, dev, NULL, "%s", name); + if (!IS_ERR(device)) + goto done; + ret = PTR_ERR(device); + device = NULL; + pr_err("Could not create device for minor %d, %s (err %d)\n", + minor, name, -ret); + cdev_del(cdev); +done: + *devp = device; + return ret; +} + +void hfi1_cdev_cleanup(struct cdev *cdev, struct device **devp) +{ + struct device *device = *devp; + + if (device) { + device_unregister(device); + *devp = NULL; + + cdev_del(cdev); + } +} + +static const char *hfi1_class_name = "hfi1"; + +const char *class_name(void) +{ + return hfi1_class_name; +} + +int __init dev_init(void) +{ + int ret; + + ret = alloc_chrdev_region(&hfi1_dev, 0, HFI1_NMINORS, DRIVER_NAME); + if (ret < 0) { + pr_err("Could not allocate chrdev region (err %d)\n", -ret); + goto done; + } + + class = class_create(THIS_MODULE, class_name()); + if (IS_ERR(class)) { + ret = PTR_ERR(class); + pr_err("Could not create device class (err %d)\n", -ret); + unregister_chrdev_region(hfi1_dev, HFI1_NMINORS); + } + +done: + return ret; +} + +void dev_cleanup(void) +{ + if (class) { + class_destroy(class); + class = NULL; + } + + unregister_chrdev_region(hfi1_dev, HFI1_NMINORS); +} diff --git a/drivers/staging/rdma/hfi1/device.h b/drivers/staging/rdma/hfi1/device.h new file mode 100644 index 000000000000..98caecd3d807 --- /dev/null +++ b/drivers/staging/rdma/hfi1/device.h @@ -0,0 +1,61 @@ +#ifndef _HFI1_DEVICE_H +#define _HFI1_DEVICE_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +int hfi1_cdev_init(int minor, const char *name, + const struct file_operations *fops, + struct cdev *cdev, struct device **devp); +void hfi1_cdev_cleanup(struct cdev *cdev, struct device **devp); +const char *class_name(void); +int __init dev_init(void); +void dev_cleanup(void); + +#endif /* _HFI1_DEVICE_H */ diff --git a/drivers/staging/rdma/hfi1/diag.c b/drivers/staging/rdma/hfi1/diag.c new file mode 100644 index 000000000000..6777d6b659cf --- /dev/null +++ b/drivers/staging/rdma/hfi1/diag.c @@ -0,0 +1,1873 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * This file contains support for diagnostic functions. It is accessed by + * opening the hfi1_diag device, normally minor number 129. Diagnostic use + * of the chip may render the chip or board unusable until the driver + * is unloaded, or in some cases, until the system is rebooted. + * + * Accesses to the chip through this interface are not similar to going + * through the /sys/bus/pci resource mmap interface. + */ + +#include <linux/io.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/vmalloc.h> +#include <linux/export.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <rdma/ib_smi.h> +#include "hfi.h" +#include "device.h" +#include "common.h" +#include "trace.h" + +#undef pr_fmt +#define pr_fmt(fmt) DRIVER_NAME ": " fmt +#define snoop_dbg(fmt, ...) \ + hfi1_cdbg(SNOOP, fmt, ##__VA_ARGS__) + +/* Snoop option mask */ +#define SNOOP_DROP_SEND (1 << 0) +#define SNOOP_USE_METADATA (1 << 1) + +static u8 snoop_flags; + +/* + * Extract packet length from LRH header. + * Why & 0x7FF? Because len is only 11 bits in case it wasn't 0'd we throw the + * bogus bits away. This is in Dwords so multiply by 4 to get size in bytes + */ +#define HFI1_GET_PKT_LEN(x) (((be16_to_cpu((x)->lrh[2]) & 0x7FF)) << 2) + +enum hfi1_filter_status { + HFI1_FILTER_HIT, + HFI1_FILTER_ERR, + HFI1_FILTER_MISS +}; + +/* snoop processing functions */ +rhf_rcv_function_ptr snoop_rhf_rcv_functions[8] = { + [RHF_RCV_TYPE_EXPECTED] = snoop_recv_handler, + [RHF_RCV_TYPE_EAGER] = snoop_recv_handler, + [RHF_RCV_TYPE_IB] = snoop_recv_handler, + [RHF_RCV_TYPE_ERROR] = snoop_recv_handler, + [RHF_RCV_TYPE_BYPASS] = snoop_recv_handler, + [RHF_RCV_TYPE_INVALID5] = process_receive_invalid, + [RHF_RCV_TYPE_INVALID6] = process_receive_invalid, + [RHF_RCV_TYPE_INVALID7] = process_receive_invalid +}; + +/* Snoop packet structure */ +struct snoop_packet { + struct list_head list; + u32 total_len; + u8 data[]; +}; + +/* Do not make these an enum or it will blow up the capture_md */ +#define PKT_DIR_EGRESS 0x0 +#define PKT_DIR_INGRESS 0x1 + +/* Packet capture metadata returned to the user with the packet. */ +struct capture_md { + u8 port; + u8 dir; + u8 reserved[6]; + union { + u64 pbc; + u64 rhf; + } u; +}; + +static atomic_t diagpkt_count = ATOMIC_INIT(0); +static struct cdev diagpkt_cdev; +static struct device *diagpkt_device; + +static ssize_t diagpkt_write(struct file *fp, const char __user *data, + size_t count, loff_t *off); + +static const struct file_operations diagpkt_file_ops = { + .owner = THIS_MODULE, + .write = diagpkt_write, + .llseek = noop_llseek, +}; + +/* + * This is used for communication with user space for snoop extended IOCTLs + */ +struct hfi1_link_info { + __be64 node_guid; + u8 port_mode; + u8 port_state; + u16 link_speed_active; + u16 link_width_active; + u16 vl15_init; + u8 port_number; + /* + * Add padding to make this a full IB SMP payload. Note: changing the + * size of this structure will make the IOCTLs created with _IOWR + * change. + * Be sure to run tests on all IOCTLs when making changes to this + * structure. + */ + u8 res[47]; +}; + +/* + * This starts our ioctl sequence numbers *way* off from the ones + * defined in ib_core. + */ +#define SNOOP_CAPTURE_VERSION 0x1 + +#define IB_IOCTL_MAGIC 0x1b /* See Documentation/ioctl-number.txt */ +#define HFI1_SNOOP_IOC_MAGIC IB_IOCTL_MAGIC +#define HFI1_SNOOP_IOC_BASE_SEQ 0x80 + +#define HFI1_SNOOP_IOCGETLINKSTATE \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ) +#define HFI1_SNOOP_IOCSETLINKSTATE \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+1) +#define HFI1_SNOOP_IOCCLEARQUEUE \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+2) +#define HFI1_SNOOP_IOCCLEARFILTER \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+3) +#define HFI1_SNOOP_IOCSETFILTER \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+4) +#define HFI1_SNOOP_IOCGETVERSION \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+5) +#define HFI1_SNOOP_IOCSET_OPTS \ + _IO(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+6) + +/* + * These offsets +6/+7 could change, but these are already known and used + * IOCTL numbers so don't change them without a good reason. + */ +#define HFI1_SNOOP_IOCGETLINKSTATE_EXTRA \ + _IOWR(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+6, \ + struct hfi1_link_info) +#define HFI1_SNOOP_IOCSETLINKSTATE_EXTRA \ + _IOWR(HFI1_SNOOP_IOC_MAGIC, HFI1_SNOOP_IOC_BASE_SEQ+7, \ + struct hfi1_link_info) + +static int hfi1_snoop_open(struct inode *in, struct file *fp); +static ssize_t hfi1_snoop_read(struct file *fp, char __user *data, + size_t pkt_len, loff_t *off); +static ssize_t hfi1_snoop_write(struct file *fp, const char __user *data, + size_t count, loff_t *off); +static long hfi1_ioctl(struct file *fp, unsigned int cmd, unsigned long arg); +static unsigned int hfi1_snoop_poll(struct file *fp, + struct poll_table_struct *wait); +static int hfi1_snoop_release(struct inode *in, struct file *fp); + +struct hfi1_packet_filter_command { + int opcode; + int length; + void *value_ptr; +}; + +/* Can't re-use PKT_DIR_*GRESS here because 0 means no packets for this */ +#define HFI1_SNOOP_INGRESS 0x1 +#define HFI1_SNOOP_EGRESS 0x2 + +enum hfi1_packet_filter_opcodes { + FILTER_BY_LID, + FILTER_BY_DLID, + FILTER_BY_MAD_MGMT_CLASS, + FILTER_BY_QP_NUMBER, + FILTER_BY_PKT_TYPE, + FILTER_BY_SERVICE_LEVEL, + FILTER_BY_PKEY, + FILTER_BY_DIRECTION, +}; + +static const struct file_operations snoop_file_ops = { + .owner = THIS_MODULE, + .open = hfi1_snoop_open, + .read = hfi1_snoop_read, + .unlocked_ioctl = hfi1_ioctl, + .poll = hfi1_snoop_poll, + .write = hfi1_snoop_write, + .release = hfi1_snoop_release +}; + +struct hfi1_filter_array { + int (*filter)(void *, void *, void *); +}; + +static int hfi1_filter_lid(void *ibhdr, void *packet_data, void *value); +static int hfi1_filter_dlid(void *ibhdr, void *packet_data, void *value); +static int hfi1_filter_mad_mgmt_class(void *ibhdr, void *packet_data, + void *value); +static int hfi1_filter_qp_number(void *ibhdr, void *packet_data, void *value); +static int hfi1_filter_ibpacket_type(void *ibhdr, void *packet_data, + void *value); +static int hfi1_filter_ib_service_level(void *ibhdr, void *packet_data, + void *value); +static int hfi1_filter_ib_pkey(void *ibhdr, void *packet_data, void *value); +static int hfi1_filter_direction(void *ibhdr, void *packet_data, void *value); + +static struct hfi1_filter_array hfi1_filters[] = { + { hfi1_filter_lid }, + { hfi1_filter_dlid }, + { hfi1_filter_mad_mgmt_class }, + { hfi1_filter_qp_number }, + { hfi1_filter_ibpacket_type }, + { hfi1_filter_ib_service_level }, + { hfi1_filter_ib_pkey }, + { hfi1_filter_direction }, +}; + +#define HFI1_MAX_FILTERS ARRAY_SIZE(hfi1_filters) +#define HFI1_DIAG_MINOR_BASE 129 + +static int hfi1_snoop_add(struct hfi1_devdata *dd, const char *name); + +int hfi1_diag_add(struct hfi1_devdata *dd) +{ + char name[16]; + int ret = 0; + + snprintf(name, sizeof(name), "%s_diagpkt%d", class_name(), + dd->unit); + /* + * Do this for each device as opposed to the normal diagpkt + * interface which is one per host + */ + ret = hfi1_snoop_add(dd, name); + if (ret) + dd_dev_err(dd, "Unable to init snoop/capture device"); + + snprintf(name, sizeof(name), "%s_diagpkt", class_name()); + if (atomic_inc_return(&diagpkt_count) == 1) { + ret = hfi1_cdev_init(HFI1_DIAGPKT_MINOR, name, + &diagpkt_file_ops, &diagpkt_cdev, + &diagpkt_device); + } + + return ret; +} + +/* this must be called w/ dd->snoop_in_lock held */ +static void drain_snoop_list(struct list_head *queue) +{ + struct list_head *pos, *q; + struct snoop_packet *packet; + + list_for_each_safe(pos, q, queue) { + packet = list_entry(pos, struct snoop_packet, list); + list_del(pos); + kfree(packet); + } +} + +static void hfi1_snoop_remove(struct hfi1_devdata *dd) +{ + unsigned long flags = 0; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + drain_snoop_list(&dd->hfi1_snoop.queue); + hfi1_cdev_cleanup(&dd->hfi1_snoop.cdev, &dd->hfi1_snoop.class_dev); + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); +} + +void hfi1_diag_remove(struct hfi1_devdata *dd) +{ + + hfi1_snoop_remove(dd); + if (atomic_dec_and_test(&diagpkt_count)) + hfi1_cdev_cleanup(&diagpkt_cdev, &diagpkt_device); + hfi1_cdev_cleanup(&dd->diag_cdev, &dd->diag_device); +} + + +/* + * Allocated structure shared between the credit return mechanism and + * diagpkt_send(). + */ +struct diagpkt_wait { + struct completion credits_returned; + int code; + atomic_t count; +}; + +/* + * When each side is finished with the structure, they call this. + * The last user frees the structure. + */ +static void put_diagpkt_wait(struct diagpkt_wait *wait) +{ + if (atomic_dec_and_test(&wait->count)) + kfree(wait); +} + +/* + * Callback from the credit return code. Set the complete, which + * will let diapkt_send() continue. + */ +static void diagpkt_complete(void *arg, int code) +{ + struct diagpkt_wait *wait = (struct diagpkt_wait *)arg; + + wait->code = code; + complete(&wait->credits_returned); + put_diagpkt_wait(wait); /* finished with the structure */ +} + +/** + * diagpkt_send - send a packet + * @dp: diag packet descriptor + */ +static ssize_t diagpkt_send(struct diag_pkt *dp) +{ + struct hfi1_devdata *dd; + struct send_context *sc; + struct pio_buf *pbuf; + u32 *tmpbuf = NULL; + ssize_t ret = 0; + u32 pkt_len, total_len; + pio_release_cb credit_cb = NULL; + void *credit_arg = NULL; + struct diagpkt_wait *wait = NULL; + + dd = hfi1_lookup(dp->unit); + if (!dd || !(dd->flags & HFI1_PRESENT) || !dd->kregbase) { + ret = -ENODEV; + goto bail; + } + if (!(dd->flags & HFI1_INITTED)) { + /* no hardware, freeze, etc. */ + ret = -ENODEV; + goto bail; + } + + if (dp->version != _DIAG_PKT_VERS) { + dd_dev_err(dd, "Invalid version %u for diagpkt_write\n", + dp->version); + ret = -EINVAL; + goto bail; + } + + /* send count must be an exact number of dwords */ + if (dp->len & 3) { + ret = -EINVAL; + goto bail; + } + + /* there is only port 1 */ + if (dp->port != 1) { + ret = -EINVAL; + goto bail; + } + + /* need a valid context */ + if (dp->sw_index >= dd->num_send_contexts) { + ret = -EINVAL; + goto bail; + } + /* can only use kernel contexts */ + if (dd->send_contexts[dp->sw_index].type != SC_KERNEL) { + ret = -EINVAL; + goto bail; + } + /* must be allocated */ + sc = dd->send_contexts[dp->sw_index].sc; + if (!sc) { + ret = -EINVAL; + goto bail; + } + /* must be enabled */ + if (!(sc->flags & SCF_ENABLED)) { + ret = -EINVAL; + goto bail; + } + + /* allocate a buffer and copy the data in */ + tmpbuf = vmalloc(dp->len); + if (!tmpbuf) { + ret = -ENOMEM; + goto bail; + } + + if (copy_from_user(tmpbuf, + (const void __user *) (unsigned long) dp->data, + dp->len)) { + ret = -EFAULT; + goto bail; + } + + /* + * pkt_len is how much data we have to write, includes header and data. + * total_len is length of the packet in Dwords plus the PBC should not + * include the CRC. + */ + pkt_len = dp->len >> 2; + total_len = pkt_len + 2; /* PBC + packet */ + + /* if 0, fill in a default */ + if (dp->pbc == 0) { + struct hfi1_pportdata *ppd = dd->pport; + + hfi1_cdbg(PKT, "Generating PBC"); + dp->pbc = create_pbc(ppd, 0, 0, 0, total_len); + } else { + hfi1_cdbg(PKT, "Using passed in PBC"); + } + + hfi1_cdbg(PKT, "Egress PBC content is 0x%llx", dp->pbc); + + /* + * The caller wants to wait until the packet is sent and to + * check for errors. The best we can do is wait until + * the buffer credits are returned and check if any packet + * error has occurred. If there are any late errors, this + * could miss it. If there are other senders who generate + * an error, this may find it. However, in general, it + * should catch most. + */ + if (dp->flags & F_DIAGPKT_WAIT) { + /* always force a credit return */ + dp->pbc |= PBC_CREDIT_RETURN; + /* turn on credit return interrupts */ + sc_add_credit_return_intr(sc); + wait = kmalloc(sizeof(*wait), GFP_KERNEL); + if (!wait) { + ret = -ENOMEM; + goto bail; + } + init_completion(&wait->credits_returned); + atomic_set(&wait->count, 2); + wait->code = PRC_OK; + + credit_cb = diagpkt_complete; + credit_arg = wait; + } + + pbuf = sc_buffer_alloc(sc, total_len, credit_cb, credit_arg); + if (!pbuf) { + /* + * No send buffer means no credit callback. Undo + * the wait set-up that was done above. We free wait + * because the callback will never be called. + */ + if (dp->flags & F_DIAGPKT_WAIT) { + sc_del_credit_return_intr(sc); + kfree(wait); + wait = NULL; + } + ret = -ENOSPC; + goto bail; + } + + pio_copy(dd, pbuf, dp->pbc, tmpbuf, pkt_len); + /* no flush needed as the HW knows the packet size */ + + ret = sizeof(*dp); + + if (dp->flags & F_DIAGPKT_WAIT) { + /* wait for credit return */ + ret = wait_for_completion_interruptible( + &wait->credits_returned); + /* + * If the wait returns an error, the wait was interrupted, + * e.g. with a ^C in the user program. The callback is + * still pending. This is OK as the wait structure is + * kmalloc'ed and the structure will free itself when + * all users are done with it. + * + * A context disable occurs on a send context restart, so + * include that in the list of errors below to check for. + * NOTE: PRC_FILL_ERR is at best informational and cannot + * be depended on. + */ + if (!ret && (((wait->code & PRC_STATUS_ERR) + || (wait->code & PRC_FILL_ERR) + || (wait->code & PRC_SC_DISABLE)))) + ret = -EIO; + + put_diagpkt_wait(wait); /* finished with the structure */ + sc_del_credit_return_intr(sc); + } + +bail: + vfree(tmpbuf); + return ret; +} + +static ssize_t diagpkt_write(struct file *fp, const char __user *data, + size_t count, loff_t *off) +{ + struct hfi1_devdata *dd; + struct send_context *sc; + u8 vl; + + struct diag_pkt dp; + + if (count != sizeof(dp)) + return -EINVAL; + + if (copy_from_user(&dp, data, sizeof(dp))) + return -EFAULT; + + /* + * The Send Context is derived from the PbcVL value + * if PBC is populated + */ + if (dp.pbc) { + dd = hfi1_lookup(dp.unit); + if (dd == NULL) + return -ENODEV; + vl = (dp.pbc >> PBC_VL_SHIFT) & PBC_VL_MASK; + sc = dd->vld[vl].sc; + if (sc) { + dp.sw_index = sc->sw_index; + hfi1_cdbg( + PKT, + "Packet sent over VL %d via Send Context %u(%u)", + vl, sc->sw_index, sc->hw_context); + } + } + + return diagpkt_send(&dp); +} + +static int hfi1_snoop_add(struct hfi1_devdata *dd, const char *name) +{ + int ret = 0; + + dd->hfi1_snoop.mode_flag = 0; + spin_lock_init(&dd->hfi1_snoop.snoop_lock); + INIT_LIST_HEAD(&dd->hfi1_snoop.queue); + init_waitqueue_head(&dd->hfi1_snoop.waitq); + + ret = hfi1_cdev_init(HFI1_SNOOP_CAPTURE_BASE + dd->unit, name, + &snoop_file_ops, + &dd->hfi1_snoop.cdev, &dd->hfi1_snoop.class_dev); + + if (ret) { + dd_dev_err(dd, "Couldn't create %s device: %d", name, ret); + hfi1_cdev_cleanup(&dd->hfi1_snoop.cdev, + &dd->hfi1_snoop.class_dev); + } + + return ret; +} + +static struct hfi1_devdata *hfi1_dd_from_sc_inode(struct inode *in) +{ + int unit = iminor(in) - HFI1_SNOOP_CAPTURE_BASE; + struct hfi1_devdata *dd = NULL; + + dd = hfi1_lookup(unit); + return dd; + +} + +/* clear or restore send context integrity checks */ +static void adjust_integrity_checks(struct hfi1_devdata *dd) +{ + struct send_context *sc; + unsigned long sc_flags; + int i; + + spin_lock_irqsave(&dd->sc_lock, sc_flags); + for (i = 0; i < dd->num_send_contexts; i++) { + int enable; + + sc = dd->send_contexts[i].sc; + + if (!sc) + continue; /* not allocated */ + + enable = likely(!HFI1_CAP_IS_KSET(NO_INTEGRITY)) && + dd->hfi1_snoop.mode_flag != HFI1_PORT_SNOOP_MODE; + + set_pio_integrity(sc); + + if (enable) /* take HFI_CAP_* flags into account */ + hfi1_init_ctxt(sc); + } + spin_unlock_irqrestore(&dd->sc_lock, sc_flags); +} + +static int hfi1_snoop_open(struct inode *in, struct file *fp) +{ + int ret; + int mode_flag = 0; + unsigned long flags = 0; + struct hfi1_devdata *dd; + struct list_head *queue; + + mutex_lock(&hfi1_mutex); + + dd = hfi1_dd_from_sc_inode(in); + if (dd == NULL) { + ret = -ENODEV; + goto bail; + } + + /* + * File mode determines snoop or capture. Some existing user + * applications expect the capture device to be able to be opened RDWR + * because they expect a dedicated capture device. For this reason we + * support a module param to force capture mode even if the file open + * mode matches snoop. + */ + if ((fp->f_flags & O_ACCMODE) == O_RDONLY) { + snoop_dbg("Capture Enabled"); + mode_flag = HFI1_PORT_CAPTURE_MODE; + } else if ((fp->f_flags & O_ACCMODE) == O_RDWR) { + snoop_dbg("Snoop Enabled"); + mode_flag = HFI1_PORT_SNOOP_MODE; + } else { + snoop_dbg("Invalid"); + ret = -EINVAL; + goto bail; + } + queue = &dd->hfi1_snoop.queue; + + /* + * We are not supporting snoop and capture at the same time. + */ + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + if (dd->hfi1_snoop.mode_flag) { + ret = -EBUSY; + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + goto bail; + } + + dd->hfi1_snoop.mode_flag = mode_flag; + drain_snoop_list(queue); + + dd->hfi1_snoop.filter_callback = NULL; + dd->hfi1_snoop.filter_value = NULL; + + /* + * Send side packet integrity checks are not helpful when snooping so + * disable and re-enable when we stop snooping. + */ + if (mode_flag == HFI1_PORT_SNOOP_MODE) { + /* clear after snoop mode is on */ + adjust_integrity_checks(dd); /* clear */ + + /* + * We also do not want to be doing the DLID LMC check for + * ingressed packets. + */ + dd->hfi1_snoop.dcc_cfg = read_csr(dd, DCC_CFG_PORT_CONFIG1); + write_csr(dd, DCC_CFG_PORT_CONFIG1, + (dd->hfi1_snoop.dcc_cfg >> 32) << 32); + } + + /* + * As soon as we set these function pointers the recv and send handlers + * are active. This is a race condition so we must make sure to drain + * the queue and init filter values above. Technically we should add + * locking here but all that will happen is on recv a packet will get + * allocated and get stuck on the snoop_lock before getting added to the + * queue. Same goes for send. + */ + dd->rhf_rcv_function_map = snoop_rhf_rcv_functions; + dd->process_pio_send = snoop_send_pio_handler; + dd->process_dma_send = snoop_send_pio_handler; + dd->pio_inline_send = snoop_inline_pio_send; + + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + ret = 0; + +bail: + mutex_unlock(&hfi1_mutex); + + return ret; +} + +static int hfi1_snoop_release(struct inode *in, struct file *fp) +{ + unsigned long flags = 0; + struct hfi1_devdata *dd; + int mode_flag; + + dd = hfi1_dd_from_sc_inode(in); + if (dd == NULL) + return -ENODEV; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + + /* clear the snoop mode before re-adjusting send context CSRs */ + mode_flag = dd->hfi1_snoop.mode_flag; + dd->hfi1_snoop.mode_flag = 0; + + /* + * Drain the queue and clear the filters we are done with it. Don't + * forget to restore the packet integrity checks + */ + drain_snoop_list(&dd->hfi1_snoop.queue); + if (mode_flag == HFI1_PORT_SNOOP_MODE) { + /* restore after snoop mode is clear */ + adjust_integrity_checks(dd); /* restore */ + + /* + * Also should probably reset the DCC_CONFIG1 register for DLID + * checking on incoming packets again. Use the value saved when + * opening the snoop device. + */ + write_csr(dd, DCC_CFG_PORT_CONFIG1, dd->hfi1_snoop.dcc_cfg); + } + + dd->hfi1_snoop.filter_callback = NULL; + kfree(dd->hfi1_snoop.filter_value); + dd->hfi1_snoop.filter_value = NULL; + + /* + * User is done snooping and capturing, return control to the normal + * handler. Re-enable SDMA handling. + */ + dd->rhf_rcv_function_map = dd->normal_rhf_rcv_functions; + dd->process_pio_send = hfi1_verbs_send_pio; + dd->process_dma_send = hfi1_verbs_send_dma; + dd->pio_inline_send = pio_copy; + + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + + snoop_dbg("snoop/capture device released"); + + return 0; +} + +static unsigned int hfi1_snoop_poll(struct file *fp, + struct poll_table_struct *wait) +{ + int ret = 0; + unsigned long flags = 0; + + struct hfi1_devdata *dd; + + dd = hfi1_dd_from_sc_inode(fp->f_inode); + if (dd == NULL) + return -ENODEV; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + + poll_wait(fp, &dd->hfi1_snoop.waitq, wait); + if (!list_empty(&dd->hfi1_snoop.queue)) + ret |= POLLIN | POLLRDNORM; + + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + return ret; + +} + +static ssize_t hfi1_snoop_write(struct file *fp, const char __user *data, + size_t count, loff_t *off) +{ + struct diag_pkt dpkt; + struct hfi1_devdata *dd; + size_t ret; + u8 byte_two, sl, sc5, sc4, vl, byte_one; + struct send_context *sc; + u32 len; + u64 pbc; + struct hfi1_ibport *ibp; + struct hfi1_pportdata *ppd; + + dd = hfi1_dd_from_sc_inode(fp->f_inode); + if (dd == NULL) + return -ENODEV; + + ppd = dd->pport; + snoop_dbg("received %lu bytes from user", count); + + memset(&dpkt, 0, sizeof(struct diag_pkt)); + dpkt.version = _DIAG_PKT_VERS; + dpkt.unit = dd->unit; + dpkt.port = 1; + + if (likely(!(snoop_flags & SNOOP_USE_METADATA))) { + /* + * We need to generate the PBC and not let diagpkt_send do it, + * to do this we need the VL and the length in dwords. + * The VL can be determined by using the SL and looking up the + * SC. Then the SC can be converted into VL. The exception to + * this is those packets which are from an SMI queue pair. + * Since we can't detect anything about the QP here we have to + * rely on the SC. If its 0xF then we assume its SMI and + * do not look at the SL. + */ + if (copy_from_user(&byte_one, data, 1)) + return -EINVAL; + + if (copy_from_user(&byte_two, data+1, 1)) + return -EINVAL; + + sc4 = (byte_one >> 4) & 0xf; + if (sc4 == 0xF) { + snoop_dbg("Detected VL15 packet ignoring SL in packet"); + vl = sc4; + } else { + sl = (byte_two >> 4) & 0xf; + ibp = to_iport(&dd->verbs_dev.ibdev, 1); + sc5 = ibp->sl_to_sc[sl]; + vl = sc_to_vlt(dd, sc5); + if (vl != sc4) { + snoop_dbg("VL %d does not match SC %d of packet", + vl, sc4); + return -EINVAL; + } + } + + sc = dd->vld[vl].sc; /* Look up the context based on VL */ + if (sc) { + dpkt.sw_index = sc->sw_index; + snoop_dbg("Sending on context %u(%u)", sc->sw_index, + sc->hw_context); + } else { + snoop_dbg("Could not find context for vl %d", vl); + return -EINVAL; + } + + len = (count >> 2) + 2; /* Add in PBC */ + pbc = create_pbc(ppd, 0, 0, vl, len); + } else { + if (copy_from_user(&pbc, data, sizeof(pbc))) + return -EINVAL; + vl = (pbc >> PBC_VL_SHIFT) & PBC_VL_MASK; + sc = dd->vld[vl].sc; /* Look up the context based on VL */ + if (sc) { + dpkt.sw_index = sc->sw_index; + } else { + snoop_dbg("Could not find context for vl %d", vl); + return -EINVAL; + } + data += sizeof(pbc); + count -= sizeof(pbc); + } + dpkt.len = count; + dpkt.data = (unsigned long)data; + + snoop_dbg("PBC: vl=0x%llx Length=0x%llx", + (pbc >> 12) & 0xf, + (pbc & 0xfff)); + + dpkt.pbc = pbc; + ret = diagpkt_send(&dpkt); + /* + * diagpkt_send only returns number of bytes in the diagpkt so patch + * that up here before returning. + */ + if (ret == sizeof(dpkt)) + return count; + + return ret; +} + +static ssize_t hfi1_snoop_read(struct file *fp, char __user *data, + size_t pkt_len, loff_t *off) +{ + ssize_t ret = 0; + unsigned long flags = 0; + struct snoop_packet *packet = NULL; + struct hfi1_devdata *dd; + + dd = hfi1_dd_from_sc_inode(fp->f_inode); + if (dd == NULL) + return -ENODEV; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + + while (list_empty(&dd->hfi1_snoop.queue)) { + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + + if (fp->f_flags & O_NONBLOCK) + return -EAGAIN; + + if (wait_event_interruptible( + dd->hfi1_snoop.waitq, + !list_empty(&dd->hfi1_snoop.queue))) + return -EINTR; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + } + + if (!list_empty(&dd->hfi1_snoop.queue)) { + packet = list_entry(dd->hfi1_snoop.queue.next, + struct snoop_packet, list); + list_del(&packet->list); + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + if (pkt_len >= packet->total_len) { + if (copy_to_user(data, packet->data, + packet->total_len)) + ret = -EFAULT; + else + ret = packet->total_len; + } else + ret = -EINVAL; + + kfree(packet); + } else + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + + return ret; +} + +static long hfi1_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) +{ + struct hfi1_devdata *dd; + void *filter_value = NULL; + long ret = 0; + int value = 0; + u8 physState = 0; + u8 linkState = 0; + u16 devState = 0; + unsigned long flags = 0; + unsigned long *argp = NULL; + struct hfi1_packet_filter_command filter_cmd = {0}; + int mode_flag = 0; + struct hfi1_pportdata *ppd = NULL; + unsigned int index; + struct hfi1_link_info link_info; + + dd = hfi1_dd_from_sc_inode(fp->f_inode); + if (dd == NULL) + return -ENODEV; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + + mode_flag = dd->hfi1_snoop.mode_flag; + + if (((_IOC_DIR(cmd) & _IOC_READ) + && !access_ok(VERIFY_WRITE, (void __user *)arg, _IOC_SIZE(cmd))) + || ((_IOC_DIR(cmd) & _IOC_WRITE) + && !access_ok(VERIFY_READ, (void __user *)arg, _IOC_SIZE(cmd)))) { + ret = -EFAULT; + } else if (!capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + } else if ((mode_flag & HFI1_PORT_CAPTURE_MODE) && + (cmd != HFI1_SNOOP_IOCCLEARQUEUE) && + (cmd != HFI1_SNOOP_IOCCLEARFILTER) && + (cmd != HFI1_SNOOP_IOCSETFILTER)) { + /* Capture devices are allowed only 3 operations + * 1.Clear capture queue + * 2.Clear capture filter + * 3.Set capture filter + * Other are invalid. + */ + ret = -EINVAL; + } else { + switch (cmd) { + case HFI1_SNOOP_IOCSETLINKSTATE: + snoop_dbg("HFI1_SNOOP_IOCSETLINKSTATE is not valid"); + ret = -EINVAL; + break; + + case HFI1_SNOOP_IOCSETLINKSTATE_EXTRA: + memset(&link_info, 0, sizeof(link_info)); + + ret = copy_from_user(&link_info, + (struct hfi1_link_info __user *)arg, + sizeof(link_info)); + if (ret) + break; + + value = link_info.port_state; + index = link_info.port_number; + if (index > dd->num_pports - 1) { + ret = -EINVAL; + break; + } + + ppd = &dd->pport[index]; + if (!ppd) { + ret = -EINVAL; + break; + } + + /* What we want to transition to */ + physState = (value >> 4) & 0xF; + linkState = value & 0xF; + snoop_dbg("Setting link state 0x%x", value); + + switch (linkState) { + case IB_PORT_NOP: + if (physState == 0) + break; + /* fall through */ + case IB_PORT_DOWN: + switch (physState) { + case 0: + devState = HLS_DN_DOWNDEF; + break; + case 2: + devState = HLS_DN_POLL; + break; + case 3: + devState = HLS_DN_DISABLE; + break; + default: + ret = -EINVAL; + goto done; + } + ret = set_link_state(ppd, devState); + break; + case IB_PORT_ARMED: + ret = set_link_state(ppd, HLS_UP_ARMED); + if (!ret) + send_idle_sma(dd, SMA_IDLE_ARM); + break; + case IB_PORT_ACTIVE: + ret = set_link_state(ppd, HLS_UP_ACTIVE); + if (!ret) + send_idle_sma(dd, SMA_IDLE_ACTIVE); + break; + default: + ret = -EINVAL; + break; + } + + if (ret) + break; + /* fall through */ + case HFI1_SNOOP_IOCGETLINKSTATE: + case HFI1_SNOOP_IOCGETLINKSTATE_EXTRA: + if (cmd == HFI1_SNOOP_IOCGETLINKSTATE_EXTRA) { + memset(&link_info, 0, sizeof(link_info)); + ret = copy_from_user(&link_info, + (struct hfi1_link_info __user *)arg, + sizeof(link_info)); + index = link_info.port_number; + } else { + ret = __get_user(index, (int __user *) arg); + if (ret != 0) + break; + } + + if (index > dd->num_pports - 1) { + ret = -EINVAL; + break; + } + + ppd = &dd->pport[index]; + if (!ppd) { + ret = -EINVAL; + break; + } + value = hfi1_ibphys_portstate(ppd); + value <<= 4; + value |= driver_lstate(ppd); + + snoop_dbg("Link port | Link State: %d", value); + + if ((cmd == HFI1_SNOOP_IOCGETLINKSTATE_EXTRA) || + (cmd == HFI1_SNOOP_IOCSETLINKSTATE_EXTRA)) { + link_info.port_state = value; + link_info.node_guid = cpu_to_be64(ppd->guid); + link_info.link_speed_active = + ppd->link_speed_active; + link_info.link_width_active = + ppd->link_width_active; + ret = copy_to_user( + (struct hfi1_link_info __user *)arg, + &link_info, sizeof(link_info)); + } else { + ret = __put_user(value, (int __user *)arg); + } + break; + + case HFI1_SNOOP_IOCCLEARQUEUE: + snoop_dbg("Clearing snoop queue"); + drain_snoop_list(&dd->hfi1_snoop.queue); + break; + + case HFI1_SNOOP_IOCCLEARFILTER: + snoop_dbg("Clearing filter"); + if (dd->hfi1_snoop.filter_callback) { + /* Drain packets first */ + drain_snoop_list(&dd->hfi1_snoop.queue); + dd->hfi1_snoop.filter_callback = NULL; + } + kfree(dd->hfi1_snoop.filter_value); + dd->hfi1_snoop.filter_value = NULL; + break; + + case HFI1_SNOOP_IOCSETFILTER: + snoop_dbg("Setting filter"); + /* just copy command structure */ + argp = (unsigned long *)arg; + ret = copy_from_user(&filter_cmd, (void __user *)argp, + sizeof(filter_cmd)); + if (ret < 0) { + pr_alert("Error copying filter command\n"); + break; + } + if (filter_cmd.opcode >= HFI1_MAX_FILTERS) { + pr_alert("Invalid opcode in request\n"); + ret = -EINVAL; + break; + } + + snoop_dbg("Opcode %d Len %d Ptr %p", + filter_cmd.opcode, filter_cmd.length, + filter_cmd.value_ptr); + + filter_value = kzalloc( + filter_cmd.length * sizeof(u8), + GFP_KERNEL); + if (!filter_value) { + pr_alert("Not enough memory\n"); + ret = -ENOMEM; + break; + } + /* copy remaining data from userspace */ + ret = copy_from_user((u8 *)filter_value, + (void __user *)filter_cmd.value_ptr, + filter_cmd.length); + if (ret < 0) { + kfree(filter_value); + pr_alert("Error copying filter data\n"); + break; + } + /* Drain packets first */ + drain_snoop_list(&dd->hfi1_snoop.queue); + dd->hfi1_snoop.filter_callback = + hfi1_filters[filter_cmd.opcode].filter; + /* just in case we see back to back sets */ + kfree(dd->hfi1_snoop.filter_value); + dd->hfi1_snoop.filter_value = filter_value; + + break; + case HFI1_SNOOP_IOCGETVERSION: + value = SNOOP_CAPTURE_VERSION; + snoop_dbg("Getting version: %d", value); + ret = __put_user(value, (int __user *)arg); + break; + case HFI1_SNOOP_IOCSET_OPTS: + snoop_flags = 0; + ret = __get_user(value, (int __user *) arg); + if (ret != 0) + break; + + snoop_dbg("Setting snoop option %d", value); + if (value & SNOOP_DROP_SEND) + snoop_flags |= SNOOP_DROP_SEND; + if (value & SNOOP_USE_METADATA) + snoop_flags |= SNOOP_USE_METADATA; + break; + default: + ret = -ENOTTY; + break; + } + } +done: + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + return ret; +} + +static void snoop_list_add_tail(struct snoop_packet *packet, + struct hfi1_devdata *dd) +{ + unsigned long flags = 0; + + spin_lock_irqsave(&dd->hfi1_snoop.snoop_lock, flags); + if (likely((dd->hfi1_snoop.mode_flag & HFI1_PORT_SNOOP_MODE) || + (dd->hfi1_snoop.mode_flag & HFI1_PORT_CAPTURE_MODE))) { + list_add_tail(&packet->list, &dd->hfi1_snoop.queue); + snoop_dbg("Added packet to list"); + } + + /* + * Technically we can could have closed the snoop device while waiting + * on the above lock and it is gone now. The snoop mode_flag will + * prevent us from adding the packet to the queue though. + */ + + spin_unlock_irqrestore(&dd->hfi1_snoop.snoop_lock, flags); + wake_up_interruptible(&dd->hfi1_snoop.waitq); +} + +static inline int hfi1_filter_check(void *val, const char *msg) +{ + if (!val) { + snoop_dbg("Error invalid %s value for filter", msg); + return HFI1_FILTER_ERR; + } + return 0; +} + +static int hfi1_filter_lid(void *ibhdr, void *packet_data, void *value) +{ + struct hfi1_ib_header *hdr; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + hdr = (struct hfi1_ib_header *)ibhdr; + + if (*((u16 *)value) == be16_to_cpu(hdr->lrh[3])) /* matches slid */ + return HFI1_FILTER_HIT; /* matched */ + + return HFI1_FILTER_MISS; /* Not matched */ +} + +static int hfi1_filter_dlid(void *ibhdr, void *packet_data, void *value) +{ + struct hfi1_ib_header *hdr; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + if (*((u16 *)value) == be16_to_cpu(hdr->lrh[1])) + return HFI1_FILTER_HIT; + + return HFI1_FILTER_MISS; +} + +/* Not valid for outgoing packets, send handler passes null for data*/ +static int hfi1_filter_mad_mgmt_class(void *ibhdr, void *packet_data, + void *value) +{ + struct hfi1_ib_header *hdr; + struct hfi1_other_headers *ohdr = NULL; + struct ib_smp *smp = NULL; + u32 qpn = 0; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(packet_data, "packet_data"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + /* Check for GRH */ + if ((be16_to_cpu(hdr->lrh[0]) & 3) == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; /* LRH + BTH + DETH */ + else + ohdr = &hdr->u.l.oth; /* LRH + GRH + BTH + DETH */ + + qpn = be32_to_cpu(ohdr->bth[1]) & 0x00FFFFFF; + if (qpn <= 1) { + smp = (struct ib_smp *)packet_data; + if (*((u8 *)value) == smp->mgmt_class) + return HFI1_FILTER_HIT; + else + return HFI1_FILTER_MISS; + } + return HFI1_FILTER_ERR; +} + +static int hfi1_filter_qp_number(void *ibhdr, void *packet_data, void *value) +{ + + struct hfi1_ib_header *hdr; + struct hfi1_other_headers *ohdr = NULL; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + /* Check for GRH */ + if ((be16_to_cpu(hdr->lrh[0]) & 3) == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; /* LRH + BTH + DETH */ + else + ohdr = &hdr->u.l.oth; /* LRH + GRH + BTH + DETH */ + if (*((u32 *)value) == (be32_to_cpu(ohdr->bth[1]) & 0x00FFFFFF)) + return HFI1_FILTER_HIT; + + return HFI1_FILTER_MISS; +} + +static int hfi1_filter_ibpacket_type(void *ibhdr, void *packet_data, + void *value) +{ + u32 lnh = 0; + u8 opcode = 0; + struct hfi1_ib_header *hdr; + struct hfi1_other_headers *ohdr = NULL; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + lnh = (be16_to_cpu(hdr->lrh[0]) & 3); + + if (lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else if (lnh == HFI1_LRH_GRH) + ohdr = &hdr->u.l.oth; + else + return HFI1_FILTER_ERR; + + opcode = be32_to_cpu(ohdr->bth[0]) >> 24; + + if (*((u8 *)value) == ((opcode >> 5) & 0x7)) + return HFI1_FILTER_HIT; + + return HFI1_FILTER_MISS; +} + +static int hfi1_filter_ib_service_level(void *ibhdr, void *packet_data, + void *value) +{ + struct hfi1_ib_header *hdr; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + if ((*((u8 *)value)) == ((be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF)) + return HFI1_FILTER_HIT; + + return HFI1_FILTER_MISS; +} + +static int hfi1_filter_ib_pkey(void *ibhdr, void *packet_data, void *value) +{ + + u32 lnh = 0; + struct hfi1_ib_header *hdr; + struct hfi1_other_headers *ohdr = NULL; + int ret; + + ret = hfi1_filter_check(ibhdr, "header"); + if (ret) + return ret; + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + hdr = (struct hfi1_ib_header *)ibhdr; + + lnh = (be16_to_cpu(hdr->lrh[0]) & 3); + if (lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else if (lnh == HFI1_LRH_GRH) + ohdr = &hdr->u.l.oth; + else + return HFI1_FILTER_ERR; + + /* P_key is 16-bit entity, however top most bit indicates + * type of membership. 0 for limited and 1 for Full. + * Limited members cannot accept information from other + * Limited members, but communication is allowed between + * every other combination of membership. + * Hence we'll omit comparing top-most bit while filtering + */ + + if ((*(u16 *)value & 0x7FFF) == + ((be32_to_cpu(ohdr->bth[0])) & 0x7FFF)) + return HFI1_FILTER_HIT; + + return HFI1_FILTER_MISS; +} + +/* + * If packet_data is NULL then this is coming from one of the send functions. + * Thus we know if its an ingressed or egressed packet. + */ +static int hfi1_filter_direction(void *ibhdr, void *packet_data, void *value) +{ + u8 user_dir = *(u8 *)value; + int ret; + + ret = hfi1_filter_check(value, "user"); + if (ret) + return ret; + + if (packet_data) { + /* Incoming packet */ + if (user_dir & HFI1_SNOOP_INGRESS) + return HFI1_FILTER_HIT; + } else { + /* Outgoing packet */ + if (user_dir & HFI1_SNOOP_EGRESS) + return HFI1_FILTER_HIT; + } + + return HFI1_FILTER_MISS; +} + +/* + * Allocate a snoop packet. The structure that is stored in the ring buffer, not + * to be confused with an hfi packet type. + */ +static struct snoop_packet *allocate_snoop_packet(u32 hdr_len, + u32 data_len, + u32 md_len) +{ + + struct snoop_packet *packet = NULL; + + packet = kzalloc(sizeof(struct snoop_packet) + hdr_len + data_len + + md_len, + GFP_ATOMIC | __GFP_NOWARN); + if (likely(packet)) + INIT_LIST_HEAD(&packet->list); + + + return packet; +} + +/* + * Instead of having snoop and capture code intermixed with the recv functions, + * both the interrupt handler and hfi1_ib_rcv() we are going to hijack the call + * and land in here for snoop/capture but if not enabled the call will go + * through as before. This gives us a single point to constrain all of the snoop + * snoop recv logic. There is nothing special that needs to happen for bypass + * packets. This routine should not try to look into the packet. It just copied + * it. There is no guarantee for filters when it comes to bypass packets as + * there is no specific support. Bottom line is this routine does now even know + * what a bypass packet is. + */ +int snoop_recv_handler(struct hfi1_packet *packet) +{ + struct hfi1_pportdata *ppd = packet->rcd->ppd; + struct hfi1_ib_header *hdr = packet->hdr; + int header_size = packet->hlen; + void *data = packet->ebuf; + u32 tlen = packet->tlen; + struct snoop_packet *s_packet = NULL; + int ret; + int snoop_mode = 0; + u32 md_len = 0; + struct capture_md md; + + snoop_dbg("PACKET IN: hdr size %d tlen %d data %p", header_size, tlen, + data); + + trace_snoop_capture(ppd->dd, header_size, hdr, tlen - header_size, + data); + + if (!ppd->dd->hfi1_snoop.filter_callback) { + snoop_dbg("filter not set"); + ret = HFI1_FILTER_HIT; + } else { + ret = ppd->dd->hfi1_snoop.filter_callback(hdr, data, + ppd->dd->hfi1_snoop.filter_value); + } + + switch (ret) { + case HFI1_FILTER_ERR: + snoop_dbg("Error in filter call"); + break; + case HFI1_FILTER_MISS: + snoop_dbg("Filter Miss"); + break; + case HFI1_FILTER_HIT: + + if (ppd->dd->hfi1_snoop.mode_flag & HFI1_PORT_SNOOP_MODE) + snoop_mode = 1; + if ((snoop_mode == 0) || + unlikely(snoop_flags & SNOOP_USE_METADATA)) + md_len = sizeof(struct capture_md); + + + s_packet = allocate_snoop_packet(header_size, + tlen - header_size, + md_len); + + if (unlikely(s_packet == NULL)) { + dd_dev_warn_ratelimited(ppd->dd, "Unable to allocate snoop/capture packet\n"); + break; + } + + if (md_len > 0) { + memset(&md, 0, sizeof(struct capture_md)); + md.port = 1; + md.dir = PKT_DIR_INGRESS; + md.u.rhf = packet->rhf; + memcpy(s_packet->data, &md, md_len); + } + + /* We should always have a header */ + if (hdr) { + memcpy(s_packet->data + md_len, hdr, header_size); + } else { + dd_dev_err(ppd->dd, "Unable to copy header to snoop/capture packet\n"); + kfree(s_packet); + break; + } + + /* + * Packets with no data are possible. If there is no data needed + * to take care of the last 4 bytes which are normally included + * with data buffers and are included in tlen. Since we kzalloc + * the buffer we do not need to set any values but if we decide + * not to use kzalloc we should zero them. + */ + if (data) + memcpy(s_packet->data + header_size + md_len, data, + tlen - header_size); + + s_packet->total_len = tlen + md_len; + snoop_list_add_tail(s_packet, ppd->dd); + + /* + * If we are snooping the packet not capturing then throw away + * after adding to the list. + */ + snoop_dbg("Capturing packet"); + if (ppd->dd->hfi1_snoop.mode_flag & HFI1_PORT_SNOOP_MODE) { + snoop_dbg("Throwing packet away"); + /* + * If we are dropping the packet we still may need to + * handle the case where error flags are set, this is + * normally done by the type specific handler but that + * won't be called in this case. + */ + if (unlikely(rhf_err_flags(packet->rhf))) + handle_eflags(packet); + + /* throw the packet on the floor */ + return RHF_RCV_CONTINUE; + } + break; + default: + break; + } + + /* + * We do not care what type of packet came in here - just pass it off + * to the normal handler. + */ + return ppd->dd->normal_rhf_rcv_functions[rhf_rcv_type(packet->rhf)] + (packet); +} + +/* + * Handle snooping and capturing packets when sdma is being used. + */ +int snoop_send_dma_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc) +{ + pr_alert("Snooping/Capture of Send DMA Packets Is Not Supported!\n"); + snoop_dbg("Unsupported Operation"); + return hfi1_verbs_send_dma(qp, ibhdr, hdrwords, ss, len, plen, dwords, + 0); +} + +/* + * Handle snooping and capturing packets when pio is being used. Does not handle + * bypass packets. The only way to send a bypass packet currently is to use the + * diagpkt interface. When that interface is enable snoop/capture is not. + */ +int snoop_send_pio_handler(struct hfi1_qp *qp, struct ahg_ib_header *ahdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct snoop_packet *s_packet = NULL; + u32 *hdr = (u32 *)&ahdr->ibh; + u32 length = 0; + struct hfi1_sge_state temp_ss; + void *data = NULL; + void *data_start = NULL; + int ret; + int snoop_mode = 0; + int md_len = 0; + struct capture_md md; + u32 vl; + u32 hdr_len = hdrwords << 2; + u32 tlen = HFI1_GET_PKT_LEN(&ahdr->ibh); + + md.u.pbc = 0; + + snoop_dbg("PACKET OUT: hdrword %u len %u plen %u dwords %u tlen %u", + hdrwords, len, plen, dwords, tlen); + if (ppd->dd->hfi1_snoop.mode_flag & HFI1_PORT_SNOOP_MODE) + snoop_mode = 1; + if ((snoop_mode == 0) || + unlikely(snoop_flags & SNOOP_USE_METADATA)) + md_len = sizeof(struct capture_md); + + /* not using ss->total_len as arg 2 b/c that does not count CRC */ + s_packet = allocate_snoop_packet(hdr_len, tlen - hdr_len, md_len); + + if (unlikely(s_packet == NULL)) { + dd_dev_warn_ratelimited(ppd->dd, "Unable to allocate snoop/capture packet\n"); + goto out; + } + + s_packet->total_len = tlen + md_len; + + if (md_len > 0) { + memset(&md, 0, sizeof(struct capture_md)); + md.port = 1; + md.dir = PKT_DIR_EGRESS; + if (likely(pbc == 0)) { + vl = be16_to_cpu(ahdr->ibh.lrh[0]) >> 12; + md.u.pbc = create_pbc(ppd, 0, qp->s_srate, vl, plen); + } else { + md.u.pbc = 0; + } + memcpy(s_packet->data, &md, md_len); + } else { + md.u.pbc = pbc; + } + + /* Copy header */ + if (likely(hdr)) { + memcpy(s_packet->data + md_len, hdr, hdr_len); + } else { + dd_dev_err(ppd->dd, + "Unable to copy header to snoop/capture packet\n"); + kfree(s_packet); + goto out; + } + + if (ss) { + data = s_packet->data + hdr_len + md_len; + data_start = data; + + /* + * Copy SGE State + * The update_sge() function below will not modify the + * individual SGEs in the array. It will make a copy each time + * and operate on that. So we only need to copy this instance + * and it won't impact PIO. + */ + temp_ss = *ss; + length = len; + + snoop_dbg("Need to copy %d bytes", length); + while (length) { + void *addr = temp_ss.sge.vaddr; + u32 slen = temp_ss.sge.length; + + if (slen > length) { + slen = length; + snoop_dbg("slen %d > len %d", slen, length); + } + snoop_dbg("copy %d to %p", slen, addr); + memcpy(data, addr, slen); + update_sge(&temp_ss, slen); + length -= slen; + data += slen; + snoop_dbg("data is now %p bytes left %d", data, length); + } + snoop_dbg("Completed SGE copy"); + } + + /* + * Why do the filter check down here? Because the event tracing has its + * own filtering and we need to have the walked the SGE list. + */ + if (!ppd->dd->hfi1_snoop.filter_callback) { + snoop_dbg("filter not set\n"); + ret = HFI1_FILTER_HIT; + } else { + ret = ppd->dd->hfi1_snoop.filter_callback( + &ahdr->ibh, + NULL, + ppd->dd->hfi1_snoop.filter_value); + } + + switch (ret) { + case HFI1_FILTER_ERR: + snoop_dbg("Error in filter call"); + /* fall through */ + case HFI1_FILTER_MISS: + snoop_dbg("Filter Miss"); + kfree(s_packet); + break; + case HFI1_FILTER_HIT: + snoop_dbg("Capturing packet"); + snoop_list_add_tail(s_packet, ppd->dd); + + if (unlikely((snoop_flags & SNOOP_DROP_SEND) && + (ppd->dd->hfi1_snoop.mode_flag & + HFI1_PORT_SNOOP_MODE))) { + unsigned long flags; + + snoop_dbg("Dropping packet"); + if (qp->s_wqe) { + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_send_complete( + qp, + qp->s_wqe, + IB_WC_SUCCESS); + spin_unlock_irqrestore(&qp->s_lock, flags); + } else if (qp->ibqp.qp_type == IB_QPT_RC) { + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_rc_send_complete(qp, &ahdr->ibh); + spin_unlock_irqrestore(&qp->s_lock, flags); + } + return 0; + } + break; + default: + kfree(s_packet); + break; + } +out: + return hfi1_verbs_send_pio(qp, ahdr, hdrwords, ss, len, plen, dwords, + md.u.pbc); +} + +/* + * Callers of this must pass a hfi1_ib_header type for the from ptr. Currently + * this can be used anywhere, but the intention is for inline ACKs for RC and + * CCA packets. We don't restrict this usage though. + */ +void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf, + u64 pbc, const void *from, size_t count) +{ + int snoop_mode = 0; + int md_len = 0; + struct capture_md md; + struct snoop_packet *s_packet = NULL; + + /* + * count is in dwords so we need to convert to bytes. + * We also need to account for CRC which would be tacked on by hardware. + */ + int packet_len = (count << 2) + 4; + int ret; + + snoop_dbg("ACK OUT: len %d", packet_len); + + if (!dd->hfi1_snoop.filter_callback) { + snoop_dbg("filter not set"); + ret = HFI1_FILTER_HIT; + } else { + ret = dd->hfi1_snoop.filter_callback( + (struct hfi1_ib_header *)from, + NULL, + dd->hfi1_snoop.filter_value); + } + + switch (ret) { + case HFI1_FILTER_ERR: + snoop_dbg("Error in filter call"); + /* fall through */ + case HFI1_FILTER_MISS: + snoop_dbg("Filter Miss"); + break; + case HFI1_FILTER_HIT: + snoop_dbg("Capturing packet"); + if (dd->hfi1_snoop.mode_flag & HFI1_PORT_SNOOP_MODE) + snoop_mode = 1; + if ((snoop_mode == 0) || + unlikely(snoop_flags & SNOOP_USE_METADATA)) + md_len = sizeof(struct capture_md); + + s_packet = allocate_snoop_packet(packet_len, 0, md_len); + + if (unlikely(s_packet == NULL)) { + dd_dev_warn_ratelimited(dd, "Unable to allocate snoop/capture packet\n"); + goto inline_pio_out; + } + + s_packet->total_len = packet_len + md_len; + + /* Fill in the metadata for the packet */ + if (md_len > 0) { + memset(&md, 0, sizeof(struct capture_md)); + md.port = 1; + md.dir = PKT_DIR_EGRESS; + md.u.pbc = pbc; + memcpy(s_packet->data, &md, md_len); + } + + /* Add the packet data which is a single buffer */ + memcpy(s_packet->data + md_len, from, packet_len); + + snoop_list_add_tail(s_packet, dd); + + if (unlikely((snoop_flags & SNOOP_DROP_SEND) && snoop_mode)) { + snoop_dbg("Dropping packet"); + return; + } + break; + default: + break; + } + +inline_pio_out: + pio_copy(dd, pbuf, pbc, from, count); + +} diff --git a/drivers/staging/rdma/hfi1/dma.c b/drivers/staging/rdma/hfi1/dma.c new file mode 100644 index 000000000000..e03bd735173c --- /dev/null +++ b/drivers/staging/rdma/hfi1/dma.c @@ -0,0 +1,186 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/types.h> +#include <linux/scatterlist.h> + +#include "verbs.h" + +#define BAD_DMA_ADDRESS ((u64) 0) + +/* + * The following functions implement driver specific replacements + * for the ib_dma_*() functions. + * + * These functions return kernel virtual addresses instead of + * device bus addresses since the driver uses the CPU to copy + * data instead of using hardware DMA. + */ + +static int hfi1_mapping_error(struct ib_device *dev, u64 dma_addr) +{ + return dma_addr == BAD_DMA_ADDRESS; +} + +static u64 hfi1_dma_map_single(struct ib_device *dev, void *cpu_addr, + size_t size, enum dma_data_direction direction) +{ + if (WARN_ON(!valid_dma_direction(direction))) + return BAD_DMA_ADDRESS; + + return (u64) cpu_addr; +} + +static void hfi1_dma_unmap_single(struct ib_device *dev, u64 addr, size_t size, + enum dma_data_direction direction) +{ + /* This is a stub, nothing to be done here */ +} + +static u64 hfi1_dma_map_page(struct ib_device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + u64 addr; + + if (WARN_ON(!valid_dma_direction(direction))) + return BAD_DMA_ADDRESS; + + if (offset + size > PAGE_SIZE) + return BAD_DMA_ADDRESS; + + addr = (u64) page_address(page); + if (addr) + addr += offset; + + return addr; +} + +static void hfi1_dma_unmap_page(struct ib_device *dev, u64 addr, size_t size, + enum dma_data_direction direction) +{ + /* This is a stub, nothing to be done here */ +} + +static int hfi1_map_sg(struct ib_device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction direction) +{ + struct scatterlist *sg; + u64 addr; + int i; + int ret = nents; + + if (WARN_ON(!valid_dma_direction(direction))) + return BAD_DMA_ADDRESS; + + for_each_sg(sgl, sg, nents, i) { + addr = (u64) page_address(sg_page(sg)); + if (!addr) { + ret = 0; + break; + } + sg->dma_address = addr + sg->offset; +#ifdef CONFIG_NEED_SG_DMA_LENGTH + sg->dma_length = sg->length; +#endif + } + return ret; +} + +static void hfi1_unmap_sg(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + /* This is a stub, nothing to be done here */ +} + +static void hfi1_sync_single_for_cpu(struct ib_device *dev, u64 addr, + size_t size, enum dma_data_direction dir) +{ +} + +static void hfi1_sync_single_for_device(struct ib_device *dev, u64 addr, + size_t size, + enum dma_data_direction dir) +{ +} + +static void *hfi1_dma_alloc_coherent(struct ib_device *dev, size_t size, + u64 *dma_handle, gfp_t flag) +{ + struct page *p; + void *addr = NULL; + + p = alloc_pages(flag, get_order(size)); + if (p) + addr = page_address(p); + if (dma_handle) + *dma_handle = (u64) addr; + return addr; +} + +static void hfi1_dma_free_coherent(struct ib_device *dev, size_t size, + void *cpu_addr, u64 dma_handle) +{ + free_pages((unsigned long) cpu_addr, get_order(size)); +} + +struct ib_dma_mapping_ops hfi1_dma_mapping_ops = { + .mapping_error = hfi1_mapping_error, + .map_single = hfi1_dma_map_single, + .unmap_single = hfi1_dma_unmap_single, + .map_page = hfi1_dma_map_page, + .unmap_page = hfi1_dma_unmap_page, + .map_sg = hfi1_map_sg, + .unmap_sg = hfi1_unmap_sg, + .sync_single_for_cpu = hfi1_sync_single_for_cpu, + .sync_single_for_device = hfi1_sync_single_for_device, + .alloc_coherent = hfi1_dma_alloc_coherent, + .free_coherent = hfi1_dma_free_coherent +}; diff --git a/drivers/staging/rdma/hfi1/driver.c b/drivers/staging/rdma/hfi1/driver.c new file mode 100644 index 000000000000..c0a59001e5cd --- /dev/null +++ b/drivers/staging/rdma/hfi1/driver.c @@ -0,0 +1,1241 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/prefetch.h> + +#include "hfi.h" +#include "trace.h" +#include "qp.h" +#include "sdma.h" + +#undef pr_fmt +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +/* + * The size has to be longer than this string, so we can append + * board/chip information to it in the initialization code. + */ +const char ib_hfi1_version[] = HFI1_DRIVER_VERSION "\n"; + +DEFINE_SPINLOCK(hfi1_devs_lock); +LIST_HEAD(hfi1_dev_list); +DEFINE_MUTEX(hfi1_mutex); /* general driver use */ + +unsigned int hfi1_max_mtu = HFI1_DEFAULT_MAX_MTU; +module_param_named(max_mtu, hfi1_max_mtu, uint, S_IRUGO); +MODULE_PARM_DESC(max_mtu, "Set max MTU bytes, default is 8192"); + +unsigned int hfi1_cu = 1; +module_param_named(cu, hfi1_cu, uint, S_IRUGO); +MODULE_PARM_DESC(cu, "Credit return units"); + +unsigned long hfi1_cap_mask = HFI1_CAP_MASK_DEFAULT; +static int hfi1_caps_set(const char *, const struct kernel_param *); +static int hfi1_caps_get(char *, const struct kernel_param *); +static const struct kernel_param_ops cap_ops = { + .set = hfi1_caps_set, + .get = hfi1_caps_get +}; +module_param_cb(cap_mask, &cap_ops, &hfi1_cap_mask, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(cap_mask, "Bit mask of enabled/disabled HW features"); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Intel Omni-Path Architecture driver"); +MODULE_VERSION(HFI1_DRIVER_VERSION); + +/* + * MAX_PKT_RCV is the max # if packets processed per receive interrupt. + */ +#define MAX_PKT_RECV 64 +#define EGR_HEAD_UPDATE_THRESHOLD 16 + +struct hfi1_ib_stats hfi1_stats; + +static int hfi1_caps_set(const char *val, const struct kernel_param *kp) +{ + int ret = 0; + unsigned long *cap_mask_ptr = (unsigned long *)kp->arg, + cap_mask = *cap_mask_ptr, value, diff, + write_mask = ((HFI1_CAP_WRITABLE_MASK << HFI1_CAP_USER_SHIFT) | + HFI1_CAP_WRITABLE_MASK); + + ret = kstrtoul(val, 0, &value); + if (ret) { + pr_warn("Invalid module parameter value for 'cap_mask'\n"); + goto done; + } + /* Get the changed bits (except the locked bit) */ + diff = value ^ (cap_mask & ~HFI1_CAP_LOCKED_SMASK); + + /* Remove any bits that are not allowed to change after driver load */ + if (HFI1_CAP_LOCKED() && (diff & ~write_mask)) { + pr_warn("Ignoring non-writable capability bits %#lx\n", + diff & ~write_mask); + diff &= write_mask; + } + + /* Mask off any reserved bits */ + diff &= ~HFI1_CAP_RESERVED_MASK; + /* Clear any previously set and changing bits */ + cap_mask &= ~diff; + /* Update the bits with the new capability */ + cap_mask |= (value & diff); + /* Check for any kernel/user restrictions */ + diff = (cap_mask & (HFI1_CAP_MUST_HAVE_KERN << HFI1_CAP_USER_SHIFT)) ^ + ((cap_mask & HFI1_CAP_MUST_HAVE_KERN) << HFI1_CAP_USER_SHIFT); + cap_mask &= ~diff; + /* Set the bitmask to the final set */ + *cap_mask_ptr = cap_mask; +done: + return ret; +} + +static int hfi1_caps_get(char *buffer, const struct kernel_param *kp) +{ + unsigned long cap_mask = *(unsigned long *)kp->arg; + + cap_mask &= ~HFI1_CAP_LOCKED_SMASK; + cap_mask |= ((cap_mask & HFI1_CAP_K2U) << HFI1_CAP_USER_SHIFT); + + return scnprintf(buffer, PAGE_SIZE, "0x%lx", cap_mask); +} + +const char *get_unit_name(int unit) +{ + static char iname[16]; + + snprintf(iname, sizeof(iname), DRIVER_NAME"_%u", unit); + return iname; +} + +/* + * Return count of units with at least one port ACTIVE. + */ +int hfi1_count_active_units(void) +{ + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + unsigned long flags; + int pidx, nunits_active = 0; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + list_for_each_entry(dd, &hfi1_dev_list, list) { + if (!(dd->flags & HFI1_PRESENT) || !dd->kregbase) + continue; + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->lid && ppd->linkup) { + nunits_active++; + break; + } + } + } + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + return nunits_active; +} + +/* + * Return count of all units, optionally return in arguments + * the number of usable (present) units, and the number of + * ports that are up. + */ +int hfi1_count_units(int *npresentp, int *nupp) +{ + int nunits = 0, npresent = 0, nup = 0; + struct hfi1_devdata *dd; + unsigned long flags; + int pidx; + struct hfi1_pportdata *ppd; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + + list_for_each_entry(dd, &hfi1_dev_list, list) { + nunits++; + if ((dd->flags & HFI1_PRESENT) && dd->kregbase) + npresent++; + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->lid && ppd->linkup) + nup++; + } + } + + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + + if (npresentp) + *npresentp = npresent; + if (nupp) + *nupp = nup; + + return nunits; +} + +/* + * Get address of eager buffer from it's index (allocated in chunks, not + * contiguous). + */ +static inline void *get_egrbuf(const struct hfi1_ctxtdata *rcd, u64 rhf, + u8 *update) +{ + u32 idx = rhf_egr_index(rhf), offset = rhf_egr_buf_offset(rhf); + + *update |= !(idx & (rcd->egrbufs.threshold - 1)) && !offset; + return (void *)(((u64)(rcd->egrbufs.rcvtids[idx].addr)) + + (offset * RCV_BUF_BLOCK_SIZE)); +} + +/* + * Validate and encode the a given RcvArray Buffer size. + * The function will check whether the given size falls within + * allowed size ranges for the respective type and, optionally, + * return the proper encoding. + */ +inline int hfi1_rcvbuf_validate(u32 size, u8 type, u16 *encoded) +{ + if (unlikely(!IS_ALIGNED(size, PAGE_SIZE))) + return 0; + if (unlikely(size < MIN_EAGER_BUFFER)) + return 0; + if (size > + (type == PT_EAGER ? MAX_EAGER_BUFFER : MAX_EXPECTED_BUFFER)) + return 0; + if (encoded) + *encoded = ilog2(size / PAGE_SIZE) + 1; + return 1; +} + +static void rcv_hdrerr(struct hfi1_ctxtdata *rcd, struct hfi1_pportdata *ppd, + struct hfi1_packet *packet) +{ + struct hfi1_message_header *rhdr = packet->hdr; + u32 rte = rhf_rcv_type_err(packet->rhf); + int lnh = be16_to_cpu(rhdr->lrh[0]) & 3; + struct hfi1_ibport *ibp = &ppd->ibport_data; + + if (packet->rhf & (RHF_VCRC_ERR | RHF_ICRC_ERR)) + return; + + if (packet->rhf & RHF_TID_ERR) { + /* For TIDERR and RC QPs preemptively schedule a NAK */ + struct hfi1_ib_header *hdr = (struct hfi1_ib_header *)rhdr; + struct hfi1_other_headers *ohdr = NULL; + u32 tlen = rhf_pkt_len(packet->rhf); /* in bytes */ + u16 lid = be16_to_cpu(hdr->lrh[1]); + u32 qp_num; + u32 rcv_flags = 0; + + /* Sanity check packet */ + if (tlen < 24) + goto drop; + + /* Check for GRH */ + if (lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else if (lnh == HFI1_LRH_GRH) { + u32 vtf; + + ohdr = &hdr->u.l.oth; + if (hdr->u.l.grh.next_hdr != IB_GRH_NEXT_HDR) + goto drop; + vtf = be32_to_cpu(hdr->u.l.grh.version_tclass_flow); + if ((vtf >> IB_GRH_VERSION_SHIFT) != IB_GRH_VERSION) + goto drop; + rcv_flags |= HFI1_HAS_GRH; + } else + goto drop; + + /* Get the destination QP number. */ + qp_num = be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + if (lid < HFI1_MULTICAST_LID_BASE) { + struct hfi1_qp *qp; + + rcu_read_lock(); + qp = hfi1_lookup_qpn(ibp, qp_num); + if (!qp) { + rcu_read_unlock(); + goto drop; + } + + /* + * Handle only RC QPs - for other QP types drop error + * packet. + */ + spin_lock(&qp->r_lock); + + /* Check for valid receive state. */ + if (!(ib_hfi1_state_ops[qp->state] & + HFI1_PROCESS_RECV_OK)) { + ibp->n_pkt_drops++; + } + + switch (qp->ibqp.qp_type) { + case IB_QPT_RC: + hfi1_rc_hdrerr( + rcd, + hdr, + rcv_flags, + qp); + break; + default: + /* For now don't handle any other QP types */ + break; + } + + spin_unlock(&qp->r_lock); + rcu_read_unlock(); + } /* Unicast QP */ + } /* Valid packet with TIDErr */ + + /* handle "RcvTypeErr" flags */ + switch (rte) { + case RHF_RTE_ERROR_OP_CODE_ERR: + { + u32 opcode; + void *ebuf = NULL; + __be32 *bth = NULL; + + if (rhf_use_egr_bfr(packet->rhf)) + ebuf = packet->ebuf; + + if (ebuf == NULL) + goto drop; /* this should never happen */ + + if (lnh == HFI1_LRH_BTH) + bth = (__be32 *)ebuf; + else if (lnh == HFI1_LRH_GRH) + bth = (__be32 *)((char *)ebuf + sizeof(struct ib_grh)); + else + goto drop; + + opcode = be32_to_cpu(bth[0]) >> 24; + opcode &= 0xff; + + if (opcode == IB_OPCODE_CNP) { + /* + * Only in pre-B0 h/w is the CNP_OPCODE handled + * via this code path (errata 291394). + */ + struct hfi1_qp *qp = NULL; + u32 lqpn, rqpn; + u16 rlid; + u8 svc_type, sl, sc5; + + sc5 = (be16_to_cpu(rhdr->lrh[0]) >> 12) & 0xf; + if (rhf_dc_info(packet->rhf)) + sc5 |= 0x10; + sl = ibp->sc_to_sl[sc5]; + + lqpn = be32_to_cpu(bth[1]) & HFI1_QPN_MASK; + rcu_read_lock(); + qp = hfi1_lookup_qpn(ibp, lqpn); + if (qp == NULL) { + rcu_read_unlock(); + goto drop; + } + + switch (qp->ibqp.qp_type) { + case IB_QPT_UD: + rlid = 0; + rqpn = 0; + svc_type = IB_CC_SVCTYPE_UD; + break; + case IB_QPT_UC: + rlid = be16_to_cpu(rhdr->lrh[3]); + rqpn = qp->remote_qpn; + svc_type = IB_CC_SVCTYPE_UC; + break; + default: + goto drop; + } + + process_becn(ppd, sl, rlid, lqpn, rqpn, svc_type); + rcu_read_unlock(); + } + + packet->rhf &= ~RHF_RCV_TYPE_ERR_SMASK; + break; + } + default: + break; + } + +drop: + return; +} + +static inline void init_packet(struct hfi1_ctxtdata *rcd, + struct hfi1_packet *packet) +{ + + packet->rsize = rcd->rcvhdrqentsize; /* words */ + packet->maxcnt = rcd->rcvhdrq_cnt * packet->rsize; /* words */ + packet->rcd = rcd; + packet->updegr = 0; + packet->etail = -1; + packet->rhf_addr = (__le32 *) rcd->rcvhdrq + rcd->head + + rcd->dd->rhf_offset; + packet->rhf = rhf_to_cpu(packet->rhf_addr); + packet->rhqoff = rcd->head; + packet->numpkt = 0; + packet->rcv_flags = 0; +} + +#ifndef CONFIG_PRESCAN_RXQ +static void prescan_rxq(struct hfi1_packet *packet) {} +#else /* CONFIG_PRESCAN_RXQ */ +static int prescan_receive_queue; + +static void process_ecn(struct hfi1_qp *qp, struct hfi1_ib_header *hdr, + struct hfi1_other_headers *ohdr, + u64 rhf, struct ib_grh *grh) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + u32 bth1; + u8 sc5, svc_type; + int is_fecn, is_becn; + + switch (qp->ibqp.qp_type) { + case IB_QPT_UD: + svc_type = IB_CC_SVCTYPE_UD; + break; + case IB_QPT_UC: /* LATER */ + case IB_QPT_RC: /* LATER */ + default: + return; + } + + is_fecn = (be32_to_cpu(ohdr->bth[1]) >> HFI1_FECN_SHIFT) & + HFI1_FECN_MASK; + is_becn = (be32_to_cpu(ohdr->bth[1]) >> HFI1_BECN_SHIFT) & + HFI1_BECN_MASK; + + sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + if (rhf_dc_info(rhf)) + sc5 |= 0x10; + + if (is_fecn) { + u32 src_qpn = be32_to_cpu(ohdr->u.ud.deth[1]) & HFI1_QPN_MASK; + u16 pkey = (u16)be32_to_cpu(ohdr->bth[0]); + u16 dlid = be16_to_cpu(hdr->lrh[1]); + u16 slid = be16_to_cpu(hdr->lrh[3]); + + return_cnp(ibp, qp, src_qpn, pkey, dlid, slid, sc5, grh); + } + + if (is_becn) { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 lqpn = be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + u8 sl = ibp->sc_to_sl[sc5]; + + process_becn(ppd, sl, 0, lqpn, 0, svc_type); + } + + /* turn off BECN, or FECN */ + bth1 = be32_to_cpu(ohdr->bth[1]); + bth1 &= ~(HFI1_FECN_MASK << HFI1_FECN_SHIFT); + bth1 &= ~(HFI1_BECN_MASK << HFI1_BECN_SHIFT); + ohdr->bth[1] = cpu_to_be32(bth1); +} + +struct ps_mdata { + struct hfi1_ctxtdata *rcd; + u32 rsize; + u32 maxcnt; + u32 ps_head; + u32 ps_tail; + u32 ps_seq; +}; + +static inline void init_ps_mdata(struct ps_mdata *mdata, + struct hfi1_packet *packet) +{ + struct hfi1_ctxtdata *rcd = packet->rcd; + + mdata->rcd = rcd; + mdata->rsize = packet->rsize; + mdata->maxcnt = packet->maxcnt; + + if (rcd->ps_state.initialized == 0) { + mdata->ps_head = packet->rhqoff; + rcd->ps_state.initialized++; + } else + mdata->ps_head = rcd->ps_state.ps_head; + + if (HFI1_CAP_IS_KSET(DMA_RTAIL)) { + mdata->ps_tail = packet->hdrqtail; + mdata->ps_seq = 0; /* not used with DMA_RTAIL */ + } else { + mdata->ps_tail = 0; /* used only with DMA_RTAIL*/ + mdata->ps_seq = rcd->seq_cnt; + } +} + +static inline int ps_done(struct ps_mdata *mdata, u64 rhf) +{ + if (HFI1_CAP_IS_KSET(DMA_RTAIL)) + return mdata->ps_head == mdata->ps_tail; + return mdata->ps_seq != rhf_rcv_seq(rhf); +} + +static inline void update_ps_mdata(struct ps_mdata *mdata) +{ + struct hfi1_ctxtdata *rcd = mdata->rcd; + + mdata->ps_head += mdata->rsize; + if (mdata->ps_head > mdata->maxcnt) + mdata->ps_head = 0; + rcd->ps_state.ps_head = mdata->ps_head; + if (!HFI1_CAP_IS_KSET(DMA_RTAIL)) { + if (++mdata->ps_seq > 13) + mdata->ps_seq = 1; + } +} + +/* + * prescan_rxq - search through the receive queue looking for packets + * containing Excplicit Congestion Notifications (FECNs, or BECNs). + * When an ECN is found, process the Congestion Notification, and toggle + * it off. + */ +static void prescan_rxq(struct hfi1_packet *packet) +{ + struct hfi1_ctxtdata *rcd = packet->rcd; + struct ps_mdata mdata; + + if (!prescan_receive_queue) + return; + + init_ps_mdata(&mdata, packet); + + while (1) { + struct hfi1_devdata *dd = rcd->dd; + struct hfi1_ibport *ibp = &rcd->ppd->ibport_data; + __le32 *rhf_addr = (__le32 *) rcd->rcvhdrq + mdata.ps_head + + dd->rhf_offset; + struct hfi1_qp *qp; + struct hfi1_ib_header *hdr; + struct hfi1_other_headers *ohdr; + struct ib_grh *grh = NULL; + u64 rhf = rhf_to_cpu(rhf_addr); + u32 etype = rhf_rcv_type(rhf), qpn; + int is_ecn = 0; + u8 lnh; + + if (ps_done(&mdata, rhf)) + break; + + if (etype != RHF_RCV_TYPE_IB) + goto next; + + hdr = (struct hfi1_ib_header *) + hfi1_get_msgheader(dd, rhf_addr); + lnh = be16_to_cpu(hdr->lrh[0]) & 3; + + if (lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else if (lnh == HFI1_LRH_GRH) { + ohdr = &hdr->u.l.oth; + grh = &hdr->u.l.grh; + } else + goto next; /* just in case */ + + is_ecn |= be32_to_cpu(ohdr->bth[1]) & + (HFI1_FECN_MASK << HFI1_FECN_SHIFT); + is_ecn |= be32_to_cpu(ohdr->bth[1]) & + (HFI1_BECN_MASK << HFI1_BECN_SHIFT); + + if (!is_ecn) + goto next; + + qpn = be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + rcu_read_lock(); + qp = hfi1_lookup_qpn(ibp, qpn); + + if (qp == NULL) { + rcu_read_unlock(); + goto next; + } + + process_ecn(qp, hdr, ohdr, rhf, grh); + rcu_read_unlock(); +next: + update_ps_mdata(&mdata); + } +} +#endif /* CONFIG_PRESCAN_RXQ */ + +#define RCV_PKT_OK 0x0 +#define RCV_PKT_MAX 0x1 + +static inline int process_rcv_packet(struct hfi1_packet *packet) +{ + int ret = RCV_PKT_OK; + + packet->hdr = hfi1_get_msgheader(packet->rcd->dd, + packet->rhf_addr); + packet->hlen = (u8 *)packet->rhf_addr - (u8 *)packet->hdr; + packet->etype = rhf_rcv_type(packet->rhf); + /* total length */ + packet->tlen = rhf_pkt_len(packet->rhf); /* in bytes */ + /* retrieve eager buffer details */ + packet->ebuf = NULL; + if (rhf_use_egr_bfr(packet->rhf)) { + packet->etail = rhf_egr_index(packet->rhf); + packet->ebuf = get_egrbuf(packet->rcd, packet->rhf, + &packet->updegr); + /* + * Prefetch the contents of the eager buffer. It is + * OK to send a negative length to prefetch_range(). + * The +2 is the size of the RHF. + */ + prefetch_range(packet->ebuf, + packet->tlen - ((packet->rcd->rcvhdrqentsize - + (rhf_hdrq_offset(packet->rhf)+2)) * 4)); + } + + /* + * Call a type specific handler for the packet. We + * should be able to trust that etype won't be beyond + * the range of valid indexes. If so something is really + * wrong and we can probably just let things come + * crashing down. There is no need to eat another + * comparison in this performance critical code. + */ + packet->rcd->dd->rhf_rcv_function_map[packet->etype](packet); + packet->numpkt++; + + /* Set up for the next packet */ + packet->rhqoff += packet->rsize; + if (packet->rhqoff >= packet->maxcnt) + packet->rhqoff = 0; + + if (packet->numpkt == MAX_PKT_RECV) { + ret = RCV_PKT_MAX; + this_cpu_inc(*packet->rcd->dd->rcv_limit); + } + + packet->rhf_addr = (__le32 *) packet->rcd->rcvhdrq + packet->rhqoff + + packet->rcd->dd->rhf_offset; + packet->rhf = rhf_to_cpu(packet->rhf_addr); + + return ret; +} + +static inline void process_rcv_update(int last, struct hfi1_packet *packet) +{ + /* + * Update head regs etc., every 16 packets, if not last pkt, + * to help prevent rcvhdrq overflows, when many packets + * are processed and queue is nearly full. + * Don't request an interrupt for intermediate updates. + */ + if (!last && !(packet->numpkt & 0xf)) { + update_usrhead(packet->rcd, packet->rhqoff, packet->updegr, + packet->etail, 0, 0); + packet->updegr = 0; + } + packet->rcv_flags = 0; +} + +static inline void finish_packet(struct hfi1_packet *packet) +{ + + /* + * Nothing we need to free for the packet. + * + * The only thing we need to do is a final update and call for an + * interrupt + */ + update_usrhead(packet->rcd, packet->rcd->head, packet->updegr, + packet->etail, rcv_intr_dynamic, packet->numpkt); + +} + +static inline void process_rcv_qp_work(struct hfi1_packet *packet) +{ + + struct hfi1_ctxtdata *rcd; + struct hfi1_qp *qp, *nqp; + + rcd = packet->rcd; + rcd->head = packet->rhqoff; + + /* + * Iterate over all QPs waiting to respond. + * The list won't change since the IRQ is only run on one CPU. + */ + list_for_each_entry_safe(qp, nqp, &rcd->qp_wait_list, rspwait) { + list_del_init(&qp->rspwait); + if (qp->r_flags & HFI1_R_RSP_NAK) { + qp->r_flags &= ~HFI1_R_RSP_NAK; + hfi1_send_rc_ack(rcd, qp, 0); + } + if (qp->r_flags & HFI1_R_RSP_SEND) { + unsigned long flags; + + qp->r_flags &= ~HFI1_R_RSP_SEND; + spin_lock_irqsave(&qp->s_lock, flags); + if (ib_hfi1_state_ops[qp->state] & + HFI1_PROCESS_OR_FLUSH_SEND) + hfi1_schedule_send(qp); + spin_unlock_irqrestore(&qp->s_lock, flags); + } + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); + } +} + +/* + * Handle receive interrupts when using the no dma rtail option. + */ +void handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd) +{ + u32 seq; + int last = 0; + struct hfi1_packet packet; + + init_packet(rcd, &packet); + seq = rhf_rcv_seq(packet.rhf); + if (seq != rcd->seq_cnt) + goto bail; + + prescan_rxq(&packet); + + while (!last) { + last = process_rcv_packet(&packet); + seq = rhf_rcv_seq(packet.rhf); + if (++rcd->seq_cnt > 13) + rcd->seq_cnt = 1; + if (seq != rcd->seq_cnt) + last = 1; + process_rcv_update(last, &packet); + } + process_rcv_qp_work(&packet); +bail: + finish_packet(&packet); +} + +void handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd) +{ + u32 hdrqtail; + int last = 0; + struct hfi1_packet packet; + + init_packet(rcd, &packet); + hdrqtail = get_rcvhdrtail(rcd); + if (packet.rhqoff == hdrqtail) + goto bail; + smp_rmb(); /* prevent speculative reads of dma'ed hdrq */ + + prescan_rxq(&packet); + + while (!last) { + last = process_rcv_packet(&packet); + if (packet.rhqoff == hdrqtail) + last = 1; + process_rcv_update(last, &packet); + } + process_rcv_qp_work(&packet); +bail: + finish_packet(&packet); + +} + +static inline void set_all_nodma_rtail(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < dd->first_user_ctxt; i++) + dd->rcd[i]->do_interrupt = + &handle_receive_interrupt_nodma_rtail; +} + +static inline void set_all_dma_rtail(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < dd->first_user_ctxt; i++) + dd->rcd[i]->do_interrupt = + &handle_receive_interrupt_dma_rtail; +} + +/* + * handle_receive_interrupt - receive a packet + * @rcd: the context + * + * Called from interrupt handler for errors or receive interrupt. + * This is the slow path interrupt handler. + */ +void handle_receive_interrupt(struct hfi1_ctxtdata *rcd) +{ + + struct hfi1_devdata *dd = rcd->dd; + u32 hdrqtail; + int last = 0, needset = 1; + struct hfi1_packet packet; + + init_packet(rcd, &packet); + + if (!HFI1_CAP_IS_KSET(DMA_RTAIL)) { + u32 seq = rhf_rcv_seq(packet.rhf); + + if (seq != rcd->seq_cnt) + goto bail; + hdrqtail = 0; + } else { + hdrqtail = get_rcvhdrtail(rcd); + if (packet.rhqoff == hdrqtail) + goto bail; + smp_rmb(); /* prevent speculative reads of dma'ed hdrq */ + } + + prescan_rxq(&packet); + + while (!last) { + + if (unlikely(dd->do_drop && atomic_xchg(&dd->drop_packet, + DROP_PACKET_OFF) == DROP_PACKET_ON)) { + dd->do_drop = 0; + + /* On to the next packet */ + packet.rhqoff += packet.rsize; + packet.rhf_addr = (__le32 *) rcd->rcvhdrq + + packet.rhqoff + + dd->rhf_offset; + packet.rhf = rhf_to_cpu(packet.rhf_addr); + + } else { + last = process_rcv_packet(&packet); + } + + if (!HFI1_CAP_IS_KSET(DMA_RTAIL)) { + u32 seq = rhf_rcv_seq(packet.rhf); + + if (++rcd->seq_cnt > 13) + rcd->seq_cnt = 1; + if (seq != rcd->seq_cnt) + last = 1; + if (needset) { + dd_dev_info(dd, + "Switching to NO_DMA_RTAIL\n"); + set_all_nodma_rtail(dd); + needset = 0; + } + } else { + if (packet.rhqoff == hdrqtail) + last = 1; + if (needset) { + dd_dev_info(dd, + "Switching to DMA_RTAIL\n"); + set_all_dma_rtail(dd); + needset = 0; + } + } + + process_rcv_update(last, &packet); + } + + process_rcv_qp_work(&packet); + +bail: + /* + * Always write head at end, and setup rcv interrupt, even + * if no packets were processed. + */ + finish_packet(&packet); +} + +/* + * Convert a given MTU size to the on-wire MAD packet enumeration. + * Return -1 if the size is invalid. + */ +int mtu_to_enum(u32 mtu, int default_if_bad) +{ + switch (mtu) { + case 0: return OPA_MTU_0; + case 256: return OPA_MTU_256; + case 512: return OPA_MTU_512; + case 1024: return OPA_MTU_1024; + case 2048: return OPA_MTU_2048; + case 4096: return OPA_MTU_4096; + case 8192: return OPA_MTU_8192; + case 10240: return OPA_MTU_10240; + } + return default_if_bad; +} + +u16 enum_to_mtu(int mtu) +{ + switch (mtu) { + case OPA_MTU_0: return 0; + case OPA_MTU_256: return 256; + case OPA_MTU_512: return 512; + case OPA_MTU_1024: return 1024; + case OPA_MTU_2048: return 2048; + case OPA_MTU_4096: return 4096; + case OPA_MTU_8192: return 8192; + case OPA_MTU_10240: return 10240; + default: return 0xffff; + } +} + +/* + * set_mtu - set the MTU + * @ppd: the per port data + * + * We can handle "any" incoming size, the issue here is whether we + * need to restrict our outgoing size. We do not deal with what happens + * to programs that are already running when the size changes. + */ +int set_mtu(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + int i, drain, ret = 0, is_up = 0; + + ppd->ibmtu = 0; + for (i = 0; i < ppd->vls_supported; i++) + if (ppd->ibmtu < dd->vld[i].mtu) + ppd->ibmtu = dd->vld[i].mtu; + ppd->ibmaxlen = ppd->ibmtu + lrh_max_header_bytes(ppd->dd); + + mutex_lock(&ppd->hls_lock); + if (ppd->host_link_state == HLS_UP_INIT + || ppd->host_link_state == HLS_UP_ARMED + || ppd->host_link_state == HLS_UP_ACTIVE) + is_up = 1; + + drain = !is_ax(dd) && is_up; + + if (drain) + /* + * MTU is specified per-VL. To ensure that no packet gets + * stuck (due, e.g., to the MTU for the packet's VL being + * reduced), empty the per-VL FIFOs before adjusting MTU. + */ + ret = stop_drain_data_vls(dd); + + if (ret) { + dd_dev_err(dd, "%s: cannot stop/drain VLs - refusing to change per-VL MTUs\n", + __func__); + goto err; + } + + hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_MTU, 0); + + if (drain) + open_fill_data_vls(dd); /* reopen all VLs */ + +err: + mutex_unlock(&ppd->hls_lock); + + return ret; +} + +int hfi1_set_lid(struct hfi1_pportdata *ppd, u32 lid, u8 lmc) +{ + struct hfi1_devdata *dd = ppd->dd; + + ppd->lid = lid; + ppd->lmc = lmc; + hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_LIDLMC, 0); + + dd_dev_info(dd, "IB%u:%u got a lid: 0x%x\n", dd->unit, ppd->port, lid); + + return 0; +} + +/* + * Following deal with the "obviously simple" task of overriding the state + * of the LEDs, which normally indicate link physical and logical status. + * The complications arise in dealing with different hardware mappings + * and the board-dependent routine being called from interrupts. + * and then there's the requirement to _flash_ them. + */ +#define LED_OVER_FREQ_SHIFT 8 +#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT) +/* Below is "non-zero" to force override, but both actual LEDs are off */ +#define LED_OVER_BOTH_OFF (8) + +static void run_led_override(unsigned long opaque) +{ + struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)opaque; + struct hfi1_devdata *dd = ppd->dd; + int timeoff; + int ph_idx; + + if (!(dd->flags & HFI1_INITTED)) + return; + + ph_idx = ppd->led_override_phase++ & 1; + ppd->led_override = ppd->led_override_vals[ph_idx]; + timeoff = ppd->led_override_timeoff; + + /* + * don't re-fire the timer if user asked for it to be off; we let + * it fire one more time after they turn it off to simplify + */ + if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) + mod_timer(&ppd->led_override_timer, jiffies + timeoff); +} + +void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val) +{ + struct hfi1_devdata *dd = ppd->dd; + int timeoff, freq; + + if (!(dd->flags & HFI1_INITTED)) + return; + + /* First check if we are blinking. If not, use 1HZ polling */ + timeoff = HZ; + freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT; + + if (freq) { + /* For blink, set each phase from one nybble of val */ + ppd->led_override_vals[0] = val & 0xF; + ppd->led_override_vals[1] = (val >> 4) & 0xF; + timeoff = (HZ << 4)/freq; + } else { + /* Non-blink set both phases the same. */ + ppd->led_override_vals[0] = val & 0xF; + ppd->led_override_vals[1] = val & 0xF; + } + ppd->led_override_timeoff = timeoff; + + /* + * If the timer has not already been started, do so. Use a "quick" + * timeout so the function will be called soon, to look at our request. + */ + if (atomic_inc_return(&ppd->led_override_timer_active) == 1) { + /* Need to start timer */ + init_timer(&ppd->led_override_timer); + ppd->led_override_timer.function = run_led_override; + ppd->led_override_timer.data = (unsigned long) ppd; + ppd->led_override_timer.expires = jiffies + 1; + add_timer(&ppd->led_override_timer); + } else { + if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) + mod_timer(&ppd->led_override_timer, jiffies + 1); + atomic_dec(&ppd->led_override_timer_active); + } +} + +/** + * hfi1_reset_device - reset the chip if possible + * @unit: the device to reset + * + * Whether or not reset is successful, we attempt to re-initialize the chip + * (that is, much like a driver unload/reload). We clear the INITTED flag + * so that the various entry points will fail until we reinitialize. For + * now, we only allow this if no user contexts are open that use chip resources + */ +int hfi1_reset_device(int unit) +{ + int ret, i; + struct hfi1_devdata *dd = hfi1_lookup(unit); + struct hfi1_pportdata *ppd; + unsigned long flags; + int pidx; + + if (!dd) { + ret = -ENODEV; + goto bail; + } + + dd_dev_info(dd, "Reset on unit %u requested\n", unit); + + if (!dd->kregbase || !(dd->flags & HFI1_PRESENT)) { + dd_dev_info(dd, + "Invalid unit number %u or not initialized or not present\n", + unit); + ret = -ENXIO; + goto bail; + } + + spin_lock_irqsave(&dd->uctxt_lock, flags); + if (dd->rcd) + for (i = dd->first_user_ctxt; i < dd->num_rcv_contexts; i++) { + if (!dd->rcd[i] || !dd->rcd[i]->cnt) + continue; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + ret = -EBUSY; + goto bail; + } + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (atomic_read(&ppd->led_override_timer_active)) { + /* Need to stop LED timer, _then_ shut off LEDs */ + del_timer_sync(&ppd->led_override_timer); + atomic_set(&ppd->led_override_timer_active, 0); + } + + /* Shut off LEDs after we are sure timer is not running */ + ppd->led_override = LED_OVER_BOTH_OFF; + } + if (dd->flags & HFI1_HAS_SEND_DMA) + sdma_exit(dd); + + hfi1_reset_cpu_counters(dd); + + ret = hfi1_init(dd, 1); + + if (ret) + dd_dev_err(dd, + "Reinitialize unit %u after reset failed with %d\n", + unit, ret); + else + dd_dev_info(dd, "Reinitialized unit %u after resetting\n", + unit); + +bail: + return ret; +} + +void handle_eflags(struct hfi1_packet *packet) +{ + struct hfi1_ctxtdata *rcd = packet->rcd; + u32 rte = rhf_rcv_type_err(packet->rhf); + + dd_dev_err(rcd->dd, + "receive context %d: rhf 0x%016llx, errs [ %s%s%s%s%s%s%s%s] rte 0x%x\n", + rcd->ctxt, packet->rhf, + packet->rhf & RHF_K_HDR_LEN_ERR ? "k_hdr_len " : "", + packet->rhf & RHF_DC_UNC_ERR ? "dc_unc " : "", + packet->rhf & RHF_DC_ERR ? "dc " : "", + packet->rhf & RHF_TID_ERR ? "tid " : "", + packet->rhf & RHF_LEN_ERR ? "len " : "", + packet->rhf & RHF_ECC_ERR ? "ecc " : "", + packet->rhf & RHF_VCRC_ERR ? "vcrc " : "", + packet->rhf & RHF_ICRC_ERR ? "icrc " : "", + rte); + + rcv_hdrerr(rcd, rcd->ppd, packet); +} + +/* + * The following functions are called by the interrupt handler. They are type + * specific handlers for each packet type. + */ +int process_receive_ib(struct hfi1_packet *packet) +{ + trace_hfi1_rcvhdr(packet->rcd->ppd->dd, + packet->rcd->ctxt, + rhf_err_flags(packet->rhf), + RHF_RCV_TYPE_IB, + packet->hlen, + packet->tlen, + packet->updegr, + rhf_egr_index(packet->rhf)); + + if (unlikely(rhf_err_flags(packet->rhf))) { + handle_eflags(packet); + return RHF_RCV_CONTINUE; + } + + hfi1_ib_rcv(packet); + return RHF_RCV_CONTINUE; +} + +int process_receive_bypass(struct hfi1_packet *packet) +{ + if (unlikely(rhf_err_flags(packet->rhf))) + handle_eflags(packet); + + dd_dev_err(packet->rcd->dd, + "Bypass packets are not supported in normal operation. Dropping\n"); + return RHF_RCV_CONTINUE; +} + +int process_receive_error(struct hfi1_packet *packet) +{ + handle_eflags(packet); + + if (unlikely(rhf_err_flags(packet->rhf))) + dd_dev_err(packet->rcd->dd, + "Unhandled error packet received. Dropping.\n"); + + return RHF_RCV_CONTINUE; +} + +int kdeth_process_expected(struct hfi1_packet *packet) +{ + if (unlikely(rhf_err_flags(packet->rhf))) + handle_eflags(packet); + + dd_dev_err(packet->rcd->dd, + "Unhandled expected packet received. Dropping.\n"); + return RHF_RCV_CONTINUE; +} + +int kdeth_process_eager(struct hfi1_packet *packet) +{ + if (unlikely(rhf_err_flags(packet->rhf))) + handle_eflags(packet); + + dd_dev_err(packet->rcd->dd, + "Unhandled eager packet received. Dropping.\n"); + return RHF_RCV_CONTINUE; +} + +int process_receive_invalid(struct hfi1_packet *packet) +{ + dd_dev_err(packet->rcd->dd, "Invalid packet type %d. Dropping\n", + rhf_rcv_type(packet->rhf)); + return RHF_RCV_CONTINUE; +} diff --git a/drivers/staging/rdma/hfi1/eprom.c b/drivers/staging/rdma/hfi1/eprom.c new file mode 100644 index 000000000000..b61d3ae93ed1 --- /dev/null +++ b/drivers/staging/rdma/hfi1/eprom.c @@ -0,0 +1,475 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/delay.h> +#include "hfi.h" +#include "common.h" +#include "eprom.h" + +/* + * The EPROM is logically divided into two partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_START P0_SIZE + +/* largest erase size supported by the controller */ +#define SIZE_32KB (32 * 1024) +#define MASK_32KB (SIZE_32KB - 1) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1) + +/* controller commands */ +#define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_PAGE_PROGRAM(addr) ((0x02 << CMD_SHIFT) | addr) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) +#define CMD_READ_SR1 ((0x05 << CMD_SHIFT)) +#define CMD_WRITE_ENABLE ((0x06 << CMD_SHIFT)) +#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr) +#define CMD_CHIP_ERASE ((0x60 << CMD_SHIFT)) +#define CMD_READ_MANUF_DEV_ID ((0x90 << CMD_SHIFT)) +#define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) + +/* controller interface speeds */ +#define EP_SPEED_FULL 0x2 /* full speed */ + +/* controller status register 1 bits */ +#define SR1_BUSY 0x1ull /* the BUSY bit in SR1 */ + +/* sleep length while waiting for controller */ +#define WAIT_SLEEP_US 100 /* must be larger than 5 (see usage) */ +#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US)) + +/* GPIO pins */ +#define EPROM_WP_N (1ull << 14) /* EPROM write line */ + +/* + * Use the EP mutex to guard against other callers from within the driver. + * Also covers usage of eprom_available. + */ +static DEFINE_MUTEX(eprom_mutex); +static int eprom_available; /* default: not available */ + +/* + * Turn on external enable line that allows writing on the flash. + */ +static void write_enable(struct hfi1_devdata *dd) +{ + /* raise signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N); + /* raise enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N); +} + +/* + * Turn off external enable line that allows writing on the flash. + */ +static void write_disable(struct hfi1_devdata *dd) +{ + /* lower signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N); + /* lower enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N); +} + +/* + * Wait for the device to become not busy. Must be called after all + * write or erase operations. + */ +static int wait_for_not_busy(struct hfi1_devdata *dd) +{ + unsigned long count = 0; + u64 reg; + int ret = 0; + + /* starts page mode */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1); + while (1) { + udelay(WAIT_SLEEP_US); + usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5); + count++; + reg = read_csr(dd, ASIC_EEP_DATA); + if ((reg & SR1_BUSY) == 0) + break; + /* 200s is the largest time for a 128Mb device */ + if (count > COUNT_DELAY_SEC(200)) { + dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n"); + ret = -ETIMEDOUT; + break; /* break, not goto - must stop page mode */ + } + } + + /* stop page mode with a NOP */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); + + return ret; +} + +/* + * Read the device ID from the SPI controller. + */ +static u32 read_device_id(struct hfi1_devdata *dd) +{ + /* read the Manufacture Device ID */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID); + return (u32)read_csr(dd, ASIC_EEP_DATA); +} + +/* + * Erase the whole flash. + */ +static int erase_chip(struct hfi1_devdata *dd) +{ + int ret; + + write_enable(dd); + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE); + ret = wait_for_not_busy(dd); + + write_disable(dd); + + return ret; +} + +/* + * Erase a range using the 32KB erase command. + */ +static int erase_32kb_range(struct hfi1_devdata *dd, u32 start, u32 end) +{ + int ret = 0; + + if (end < start) + return -EINVAL; + + if ((start & MASK_32KB) || (end & MASK_32KB)) { + dd_dev_err(dd, + "%s: non-aligned range (0x%x,0x%x) for a 32KB erase\n", + __func__, start, end); + return -EINVAL; + } + + write_enable(dd); + + for (; start < end; start += SIZE_32KB) { + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, + CMD_SECTOR_ERASE_32KB(start)); + ret = wait_for_not_busy(dd); + if (ret) + goto done; + } + +done: + write_disable(dd); + + return ret; +} + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset. Copy to user address addr. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + read_page(dd, start + offset, buffer); + if (copy_to_user((void __user *)(addr + offset), + buffer, EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + } + +done: + return ret; +} + +/* + * Write a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_DATA, data[0]); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset)); + for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++) + write_csr(dd, ASIC_EEP_DATA, data[i]); + /* will close the open page */ + return wait_for_not_busy(dd); +} + +/* + * Write length bytes starting at offset. Read from user address addr. + */ +static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + write_enable(dd); + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + if (copy_from_user(buffer, (void __user *)(addr + offset), + EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + ret = write_page(dd, start + offset, buffer); + if (ret) + goto done; + } + +done: + write_disable(dd); + return ret; +} + +/* + * Perform the given operation on the EPROM. Called from user space. The + * user credentials have already been checked. + * + * Return 0 on success, -ERRNO on error + */ +int handle_eprom_command(const struct hfi1_cmd *cmd) +{ + struct hfi1_devdata *dd; + u32 dev_id; + int ret = 0; + + /* + * The EPROM is per-device, so use unit 0 as that will always + * exist. + */ + dd = hfi1_lookup(0); + if (!dd) { + pr_err("%s: cannot find unit 0!\n", __func__); + return -EINVAL; + } + + /* lock against other callers touching the ASIC block */ + mutex_lock(&eprom_mutex); + + /* some platforms do not have an EPROM */ + if (!eprom_available) { + ret = -ENOSYS; + goto done_asic; + } + + /* lock against the other HFI on another OS */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n", + __func__, cmd->type, cmd->len, cmd->addr); + + switch (cmd->type) { + case HFI1_CMD_EP_INFO: + if (cmd->len != sizeof(u32)) { + ret = -ERANGE; + break; + } + dev_id = read_device_id(dd); + /* addr points to a u32 user buffer */ + if (copy_to_user((void __user *)cmd->addr, &dev_id, + sizeof(u32))) + ret = -EFAULT; + break; + case HFI1_CMD_EP_ERASE_CHIP: + ret = erase_chip(dd); + break; + case HFI1_CMD_EP_ERASE_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, 0, cmd->len); + break; + case HFI1_CMD_EP_ERASE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, P1_START, P1_START + cmd->len); + break; + case HFI1_CMD_EP_READ_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = read_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_READ_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = read_length(dd, P1_START, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P0: + if (cmd->len > P0_SIZE) { + ret = -ERANGE; + break; + } + ret = write_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = write_length(dd, P1_START, cmd->len, cmd->addr); + break; + default: + dd_dev_err(dd, "%s: unexpected command %d\n", + __func__, cmd->type); + ret = -EINVAL; + break; + } + + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} + +/* + * Initialize the EPROM handler. + */ +int eprom_init(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* only the discrete chip has an EPROM, nothing to do */ + if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0) + return 0; + + /* lock against other callers */ + mutex_lock(&eprom_mutex); + if (eprom_available) /* already initialized */ + goto done_asic; + + /* + * Lock against the other HFI on another OS - the mutex above + * would have caught anything in this driver. It is OK if + * both OSes reset the EPROM - as long as they don't do it at + * the same time. + */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + /* reset EPROM to be sure it is in a good state */ + + /* set reset */ + write_csr(dd, ASIC_EEP_CTL_STAT, + ASIC_EEP_CTL_STAT_EP_RESET_SMASK); + /* clear reset, set speed */ + write_csr(dd, ASIC_EEP_CTL_STAT, + EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT); + + /* wake the device with command "release powerdown NoID" */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID); + + eprom_available = 1; + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} diff --git a/drivers/staging/rdma/hfi1/eprom.h b/drivers/staging/rdma/hfi1/eprom.h new file mode 100644 index 000000000000..64a64276be81 --- /dev/null +++ b/drivers/staging/rdma/hfi1/eprom.h @@ -0,0 +1,55 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +struct hfi1_cmd; +struct hfi1_devdata; + +int eprom_init(struct hfi1_devdata *dd); +int handle_eprom_command(const struct hfi1_cmd *cmd); diff --git a/drivers/staging/rdma/hfi1/file_ops.c b/drivers/staging/rdma/hfi1/file_ops.c new file mode 100644 index 000000000000..469861750b76 --- /dev/null +++ b/drivers/staging/rdma/hfi1/file_ops.c @@ -0,0 +1,2140 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/cdev.h> +#include <linux/swap.h> +#include <linux/vmalloc.h> +#include <linux/highmem.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <asm/pgtable.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/cred.h> +#include <linux/uio.h> + +#include "hfi.h" +#include "pio.h" +#include "device.h" +#include "common.h" +#include "trace.h" +#include "user_sdma.h" +#include "eprom.h" + +#undef pr_fmt +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +#define SEND_CTXT_HALT_TIMEOUT 1000 /* msecs */ + +/* + * File operation functions + */ +static int hfi1_file_open(struct inode *, struct file *); +static int hfi1_file_close(struct inode *, struct file *); +static ssize_t hfi1_file_write(struct file *, const char __user *, + size_t, loff_t *); +static ssize_t hfi1_write_iter(struct kiocb *, struct iov_iter *); +static unsigned int hfi1_poll(struct file *, struct poll_table_struct *); +static int hfi1_file_mmap(struct file *, struct vm_area_struct *); + +static u64 kvirt_to_phys(void *); +static int assign_ctxt(struct file *, struct hfi1_user_info *); +static int init_subctxts(struct hfi1_ctxtdata *, const struct hfi1_user_info *); +static int user_init(struct file *); +static int get_ctxt_info(struct file *, void __user *, __u32); +static int get_base_info(struct file *, void __user *, __u32); +static int setup_ctxt(struct file *); +static int setup_subctxt(struct hfi1_ctxtdata *); +static int get_user_context(struct file *, struct hfi1_user_info *, + int, unsigned); +static int find_shared_ctxt(struct file *, const struct hfi1_user_info *); +static int allocate_ctxt(struct file *, struct hfi1_devdata *, + struct hfi1_user_info *); +static unsigned int poll_urgent(struct file *, struct poll_table_struct *); +static unsigned int poll_next(struct file *, struct poll_table_struct *); +static int user_event_ack(struct hfi1_ctxtdata *, int, unsigned long); +static int set_ctxt_pkey(struct hfi1_ctxtdata *, unsigned, u16); +static int manage_rcvq(struct hfi1_ctxtdata *, unsigned, int); +static int vma_fault(struct vm_area_struct *, struct vm_fault *); +static int exp_tid_setup(struct file *, struct hfi1_tid_info *); +static int exp_tid_free(struct file *, struct hfi1_tid_info *); +static void unlock_exp_tids(struct hfi1_ctxtdata *); + +static const struct file_operations hfi1_file_ops = { + .owner = THIS_MODULE, + .write = hfi1_file_write, + .write_iter = hfi1_write_iter, + .open = hfi1_file_open, + .release = hfi1_file_close, + .poll = hfi1_poll, + .mmap = hfi1_file_mmap, + .llseek = noop_llseek, +}; + +static struct vm_operations_struct vm_ops = { + .fault = vma_fault, +}; + +/* + * Types of memories mapped into user processes' space + */ +enum mmap_types { + PIO_BUFS = 1, + PIO_BUFS_SOP, + PIO_CRED, + RCV_HDRQ, + RCV_EGRBUF, + UREGS, + EVENTS, + STATUS, + RTAIL, + SUBCTXT_UREGS, + SUBCTXT_RCV_HDRQ, + SUBCTXT_EGRBUF, + SDMA_COMP +}; + +/* + * Masks and offsets defining the mmap tokens + */ +#define HFI1_MMAP_OFFSET_MASK 0xfffULL +#define HFI1_MMAP_OFFSET_SHIFT 0 +#define HFI1_MMAP_SUBCTXT_MASK 0xfULL +#define HFI1_MMAP_SUBCTXT_SHIFT 12 +#define HFI1_MMAP_CTXT_MASK 0xffULL +#define HFI1_MMAP_CTXT_SHIFT 16 +#define HFI1_MMAP_TYPE_MASK 0xfULL +#define HFI1_MMAP_TYPE_SHIFT 24 +#define HFI1_MMAP_MAGIC_MASK 0xffffffffULL +#define HFI1_MMAP_MAGIC_SHIFT 32 + +#define HFI1_MMAP_MAGIC 0xdabbad00 + +#define HFI1_MMAP_TOKEN_SET(field, val) \ + (((val) & HFI1_MMAP_##field##_MASK) << HFI1_MMAP_##field##_SHIFT) +#define HFI1_MMAP_TOKEN_GET(field, token) \ + (((token) >> HFI1_MMAP_##field##_SHIFT) & HFI1_MMAP_##field##_MASK) +#define HFI1_MMAP_TOKEN(type, ctxt, subctxt, addr) \ + (HFI1_MMAP_TOKEN_SET(MAGIC, HFI1_MMAP_MAGIC) | \ + HFI1_MMAP_TOKEN_SET(TYPE, type) | \ + HFI1_MMAP_TOKEN_SET(CTXT, ctxt) | \ + HFI1_MMAP_TOKEN_SET(SUBCTXT, subctxt) | \ + HFI1_MMAP_TOKEN_SET(OFFSET, ((unsigned long)addr & ~PAGE_MASK))) + +#define EXP_TID_SET(field, value) \ + (((value) & EXP_TID_TID##field##_MASK) << \ + EXP_TID_TID##field##_SHIFT) +#define EXP_TID_CLEAR(tid, field) { \ + (tid) &= ~(EXP_TID_TID##field##_MASK << \ + EXP_TID_TID##field##_SHIFT); \ + } +#define EXP_TID_RESET(tid, field, value) do { \ + EXP_TID_CLEAR(tid, field); \ + (tid) |= EXP_TID_SET(field, value); \ + } while (0) + +#define dbg(fmt, ...) \ + pr_info(fmt, ##__VA_ARGS__) + + +static inline int is_valid_mmap(u64 token) +{ + return (HFI1_MMAP_TOKEN_GET(MAGIC, token) == HFI1_MMAP_MAGIC); +} + +static int hfi1_file_open(struct inode *inode, struct file *fp) +{ + /* The real work is performed later in assign_ctxt() */ + fp->private_data = kzalloc(sizeof(struct hfi1_filedata), GFP_KERNEL); + if (fp->private_data) /* no cpu affinity by default */ + ((struct hfi1_filedata *)fp->private_data)->rec_cpu_num = -1; + return fp->private_data ? 0 : -ENOMEM; +} + +static ssize_t hfi1_file_write(struct file *fp, const char __user *data, + size_t count, loff_t *offset) +{ + const struct hfi1_cmd __user *ucmd; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_cmd cmd; + struct hfi1_user_info uinfo; + struct hfi1_tid_info tinfo; + ssize_t consumed = 0, copy = 0, ret = 0; + void *dest = NULL; + __u64 user_val = 0; + int uctxt_required = 1; + int must_be_root = 0; + + if (count < sizeof(cmd)) { + ret = -EINVAL; + goto bail; + } + + ucmd = (const struct hfi1_cmd __user *)data; + if (copy_from_user(&cmd, ucmd, sizeof(cmd))) { + ret = -EFAULT; + goto bail; + } + + consumed = sizeof(cmd); + + switch (cmd.type) { + case HFI1_CMD_ASSIGN_CTXT: + uctxt_required = 0; /* assigned user context not required */ + copy = sizeof(uinfo); + dest = &uinfo; + break; + case HFI1_CMD_SDMA_STATUS_UPD: + case HFI1_CMD_CREDIT_UPD: + copy = 0; + break; + case HFI1_CMD_TID_UPDATE: + case HFI1_CMD_TID_FREE: + copy = sizeof(tinfo); + dest = &tinfo; + break; + case HFI1_CMD_USER_INFO: + case HFI1_CMD_RECV_CTRL: + case HFI1_CMD_POLL_TYPE: + case HFI1_CMD_ACK_EVENT: + case HFI1_CMD_CTXT_INFO: + case HFI1_CMD_SET_PKEY: + case HFI1_CMD_CTXT_RESET: + copy = 0; + user_val = cmd.addr; + break; + case HFI1_CMD_EP_INFO: + case HFI1_CMD_EP_ERASE_CHIP: + case HFI1_CMD_EP_ERASE_P0: + case HFI1_CMD_EP_ERASE_P1: + case HFI1_CMD_EP_READ_P0: + case HFI1_CMD_EP_READ_P1: + case HFI1_CMD_EP_WRITE_P0: + case HFI1_CMD_EP_WRITE_P1: + uctxt_required = 0; /* assigned user context not required */ + must_be_root = 1; /* validate user */ + copy = 0; + break; + default: + ret = -EINVAL; + goto bail; + } + + /* If the command comes with user data, copy it. */ + if (copy) { + if (copy_from_user(dest, (void __user *)cmd.addr, copy)) { + ret = -EFAULT; + goto bail; + } + consumed += copy; + } + + /* + * Make sure there is a uctxt when needed. + */ + if (uctxt_required && !uctxt) { + ret = -EINVAL; + goto bail; + } + + /* only root can do these operations */ + if (must_be_root && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto bail; + } + + switch (cmd.type) { + case HFI1_CMD_ASSIGN_CTXT: + ret = assign_ctxt(fp, &uinfo); + if (ret < 0) + goto bail; + ret = setup_ctxt(fp); + if (ret) + goto bail; + ret = user_init(fp); + break; + case HFI1_CMD_CTXT_INFO: + ret = get_ctxt_info(fp, (void __user *)(unsigned long) + user_val, cmd.len); + break; + case HFI1_CMD_USER_INFO: + ret = get_base_info(fp, (void __user *)(unsigned long) + user_val, cmd.len); + break; + case HFI1_CMD_SDMA_STATUS_UPD: + break; + case HFI1_CMD_CREDIT_UPD: + if (uctxt && uctxt->sc) + sc_return_credits(uctxt->sc); + break; + case HFI1_CMD_TID_UPDATE: + ret = exp_tid_setup(fp, &tinfo); + if (!ret) { + unsigned long addr; + /* + * Copy the number of tidlist entries we used + * and the length of the buffer we registered. + * These fields are adjacent in the structure so + * we can copy them at the same time. + */ + addr = (unsigned long)cmd.addr + + offsetof(struct hfi1_tid_info, tidcnt); + if (copy_to_user((void __user *)addr, &tinfo.tidcnt, + sizeof(tinfo.tidcnt) + + sizeof(tinfo.length))) + ret = -EFAULT; + } + break; + case HFI1_CMD_TID_FREE: + ret = exp_tid_free(fp, &tinfo); + break; + case HFI1_CMD_RECV_CTRL: + ret = manage_rcvq(uctxt, subctxt_fp(fp), (int)user_val); + break; + case HFI1_CMD_POLL_TYPE: + uctxt->poll_type = (typeof(uctxt->poll_type))user_val; + break; + case HFI1_CMD_ACK_EVENT: + ret = user_event_ack(uctxt, subctxt_fp(fp), user_val); + break; + case HFI1_CMD_SET_PKEY: + if (HFI1_CAP_IS_USET(PKEY_CHECK)) + ret = set_ctxt_pkey(uctxt, subctxt_fp(fp), user_val); + else + ret = -EPERM; + break; + case HFI1_CMD_CTXT_RESET: { + struct send_context *sc; + struct hfi1_devdata *dd; + + if (!uctxt || !uctxt->dd || !uctxt->sc) { + ret = -EINVAL; + break; + } + /* + * There is no protection here. User level has to + * guarantee that no one will be writing to the send + * context while it is being re-initialized. + * If user level breaks that guarantee, it will break + * it's own context and no one else's. + */ + dd = uctxt->dd; + sc = uctxt->sc; + /* + * Wait until the interrupt handler has marked the + * context as halted or frozen. Report error if we time + * out. + */ + wait_event_interruptible_timeout( + sc->halt_wait, (sc->flags & SCF_HALTED), + msecs_to_jiffies(SEND_CTXT_HALT_TIMEOUT)); + if (!(sc->flags & SCF_HALTED)) { + ret = -ENOLCK; + break; + } + /* + * If the send context was halted due to a Freeze, + * wait until the device has been "unfrozen" before + * resetting the context. + */ + if (sc->flags & SCF_FROZEN) { + wait_event_interruptible_timeout( + dd->event_queue, + !(ACCESS_ONCE(dd->flags) & HFI1_FROZEN), + msecs_to_jiffies(SEND_CTXT_HALT_TIMEOUT)); + if (dd->flags & HFI1_FROZEN) { + ret = -ENOLCK; + break; + } + if (dd->flags & HFI1_FORCED_FREEZE) { + /* Don't allow context reset if we are into + * forced freeze */ + ret = -ENODEV; + break; + } + sc_disable(sc); + ret = sc_enable(sc); + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_ENB, + uctxt->ctxt); + } else + ret = sc_restart(sc); + if (!ret) + sc_return_credits(sc); + break; + } + case HFI1_CMD_EP_INFO: + case HFI1_CMD_EP_ERASE_CHIP: + case HFI1_CMD_EP_ERASE_P0: + case HFI1_CMD_EP_ERASE_P1: + case HFI1_CMD_EP_READ_P0: + case HFI1_CMD_EP_READ_P1: + case HFI1_CMD_EP_WRITE_P0: + case HFI1_CMD_EP_WRITE_P1: + ret = handle_eprom_command(&cmd); + break; + } + + if (ret >= 0) + ret = consumed; +bail: + return ret; +} + +static ssize_t hfi1_write_iter(struct kiocb *kiocb, struct iov_iter *from) +{ + struct hfi1_user_sdma_pkt_q *pq; + struct hfi1_user_sdma_comp_q *cq; + int ret = 0, done = 0, reqs = 0; + unsigned long dim = from->nr_segs; + + if (!user_sdma_comp_fp(kiocb->ki_filp) || + !user_sdma_pkt_fp(kiocb->ki_filp)) { + ret = -EIO; + goto done; + } + + if (!iter_is_iovec(from) || !dim) { + ret = -EINVAL; + goto done; + } + + hfi1_cdbg(SDMA, "SDMA request from %u:%u (%lu)", + ctxt_fp(kiocb->ki_filp)->ctxt, subctxt_fp(kiocb->ki_filp), + dim); + pq = user_sdma_pkt_fp(kiocb->ki_filp); + cq = user_sdma_comp_fp(kiocb->ki_filp); + + if (atomic_read(&pq->n_reqs) == pq->n_max_reqs) { + ret = -ENOSPC; + goto done; + } + + while (dim) { + unsigned long count = 0; + + ret = hfi1_user_sdma_process_request( + kiocb->ki_filp, (struct iovec *)(from->iov + done), + dim, &count); + if (ret) + goto done; + dim -= count; + done += count; + reqs++; + } +done: + return ret ? ret : reqs; +} + +static int hfi1_file_mmap(struct file *fp, struct vm_area_struct *vma) +{ + struct hfi1_ctxtdata *uctxt; + struct hfi1_devdata *dd; + unsigned long flags, pfn; + u64 token = vma->vm_pgoff << PAGE_SHIFT, + memaddr = 0; + u8 subctxt, mapio = 0, vmf = 0, type; + ssize_t memlen = 0; + int ret = 0; + u16 ctxt; + + uctxt = ctxt_fp(fp); + if (!is_valid_mmap(token) || !uctxt || + !(vma->vm_flags & VM_SHARED)) { + ret = -EINVAL; + goto done; + } + dd = uctxt->dd; + ctxt = HFI1_MMAP_TOKEN_GET(CTXT, token); + subctxt = HFI1_MMAP_TOKEN_GET(SUBCTXT, token); + type = HFI1_MMAP_TOKEN_GET(TYPE, token); + if (ctxt != uctxt->ctxt || subctxt != subctxt_fp(fp)) { + ret = -EINVAL; + goto done; + } + + flags = vma->vm_flags; + + switch (type) { + case PIO_BUFS: + case PIO_BUFS_SOP: + memaddr = ((dd->physaddr + TXE_PIO_SEND) + + /* chip pio base */ + (uctxt->sc->hw_context * (1 << 16))) + + /* 64K PIO space / ctxt */ + (type == PIO_BUFS_SOP ? + (TXE_PIO_SIZE / 2) : 0); /* sop? */ + /* + * Map only the amount allocated to the context, not the + * entire available context's PIO space. + */ + memlen = ALIGN(uctxt->sc->credits * PIO_BLOCK_SIZE, + PAGE_SIZE); + flags &= ~VM_MAYREAD; + flags |= VM_DONTCOPY | VM_DONTEXPAND; + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + mapio = 1; + break; + case PIO_CRED: + if (flags & VM_WRITE) { + ret = -EPERM; + goto done; + } + /* + * The credit return location for this context could be on the + * second or third page allocated for credit returns (if number + * of enabled contexts > 64 and 128 respectively). + */ + memaddr = dd->cr_base[uctxt->numa_id].pa + + (((u64)uctxt->sc->hw_free - + (u64)dd->cr_base[uctxt->numa_id].va) & PAGE_MASK); + memlen = PAGE_SIZE; + flags &= ~VM_MAYWRITE; + flags |= VM_DONTCOPY | VM_DONTEXPAND; + /* + * The driver has already allocated memory for credit + * returns and programmed it into the chip. Has that + * memory been flagged as non-cached? + */ + /* vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); */ + mapio = 1; + break; + case RCV_HDRQ: + memaddr = uctxt->rcvhdrq_phys; + memlen = uctxt->rcvhdrq_size; + break; + case RCV_EGRBUF: { + unsigned long addr; + int i; + /* + * The RcvEgr buffer need to be handled differently + * as multiple non-contiguous pages need to be mapped + * into the user process. + */ + memlen = uctxt->egrbufs.size; + if ((vma->vm_end - vma->vm_start) != memlen) { + dd_dev_err(dd, "Eager buffer map size invalid (%lu != %lu)\n", + (vma->vm_end - vma->vm_start), memlen); + ret = -EINVAL; + goto done; + } + if (vma->vm_flags & VM_WRITE) { + ret = -EPERM; + goto done; + } + vma->vm_flags &= ~VM_MAYWRITE; + addr = vma->vm_start; + for (i = 0 ; i < uctxt->egrbufs.numbufs; i++) { + ret = remap_pfn_range( + vma, addr, + uctxt->egrbufs.buffers[i].phys >> PAGE_SHIFT, + uctxt->egrbufs.buffers[i].len, + vma->vm_page_prot); + if (ret < 0) + goto done; + addr += uctxt->egrbufs.buffers[i].len; + } + ret = 0; + goto done; + } + case UREGS: + /* + * Map only the page that contains this context's user + * registers. + */ + memaddr = (unsigned long) + (dd->physaddr + RXE_PER_CONTEXT_USER) + + (uctxt->ctxt * RXE_PER_CONTEXT_SIZE); + /* + * TidFlow table is on the same page as the rest of the + * user registers. + */ + memlen = PAGE_SIZE; + flags |= VM_DONTCOPY | VM_DONTEXPAND; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + mapio = 1; + break; + case EVENTS: + /* + * Use the page where this context's flags are. User level + * knows where it's own bitmap is within the page. + */ + memaddr = ((unsigned long)dd->events + + ((uctxt->ctxt - dd->first_user_ctxt) * + HFI1_MAX_SHARED_CTXTS)) & PAGE_MASK; + memlen = PAGE_SIZE; + /* + * v3.7 removes VM_RESERVED but the effect is kept by + * using VM_IO. + */ + flags |= VM_IO | VM_DONTEXPAND; + vmf = 1; + break; + case STATUS: + memaddr = kvirt_to_phys((void *)dd->status); + memlen = PAGE_SIZE; + flags |= VM_IO | VM_DONTEXPAND; + break; + case RTAIL: + if (!HFI1_CAP_IS_USET(DMA_RTAIL)) { + /* + * If the memory allocation failed, the context alloc + * also would have failed, so we would never get here + */ + ret = -EINVAL; + goto done; + } + if (flags & VM_WRITE) { + ret = -EPERM; + goto done; + } + memaddr = uctxt->rcvhdrqtailaddr_phys; + memlen = PAGE_SIZE; + flags &= ~VM_MAYWRITE; + break; + case SUBCTXT_UREGS: + memaddr = (u64)uctxt->subctxt_uregbase; + memlen = PAGE_SIZE; + flags |= VM_IO | VM_DONTEXPAND; + vmf = 1; + break; + case SUBCTXT_RCV_HDRQ: + memaddr = (u64)uctxt->subctxt_rcvhdr_base; + memlen = uctxt->rcvhdrq_size * uctxt->subctxt_cnt; + flags |= VM_IO | VM_DONTEXPAND; + vmf = 1; + break; + case SUBCTXT_EGRBUF: + memaddr = (u64)uctxt->subctxt_rcvegrbuf; + memlen = uctxt->egrbufs.size * uctxt->subctxt_cnt; + flags |= VM_IO | VM_DONTEXPAND; + flags &= ~VM_MAYWRITE; + vmf = 1; + break; + case SDMA_COMP: { + struct hfi1_user_sdma_comp_q *cq; + + if (!user_sdma_comp_fp(fp)) { + ret = -EFAULT; + goto done; + } + cq = user_sdma_comp_fp(fp); + memaddr = (u64)cq->comps; + memlen = ALIGN(sizeof(*cq->comps) * cq->nentries, PAGE_SIZE); + flags |= VM_IO | VM_DONTEXPAND; + vmf = 1; + break; + } + default: + ret = -EINVAL; + break; + } + + if ((vma->vm_end - vma->vm_start) != memlen) { + hfi1_cdbg(PROC, "%u:%u Memory size mismatch %lu:%lu", + uctxt->ctxt, subctxt_fp(fp), + (vma->vm_end - vma->vm_start), memlen); + ret = -EINVAL; + goto done; + } + + vma->vm_flags = flags; + dd_dev_info(dd, + "%s: %u:%u type:%u io/vf:%d/%d, addr:0x%llx, len:%lu(%lu), flags:0x%lx\n", + __func__, ctxt, subctxt, type, mapio, vmf, memaddr, memlen, + vma->vm_end - vma->vm_start, vma->vm_flags); + pfn = (unsigned long)(memaddr >> PAGE_SHIFT); + if (vmf) { + vma->vm_pgoff = pfn; + vma->vm_ops = &vm_ops; + ret = 0; + } else if (mapio) { + ret = io_remap_pfn_range(vma, vma->vm_start, pfn, memlen, + vma->vm_page_prot); + } else { + ret = remap_pfn_range(vma, vma->vm_start, pfn, memlen, + vma->vm_page_prot); + } +done: + return ret; +} + +/* + * Local (non-chip) user memory is not mapped right away but as it is + * accessed by the user-level code. + */ +static int vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct page *page; + + page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT)); + if (!page) + return VM_FAULT_SIGBUS; + + get_page(page); + vmf->page = page; + + return 0; +} + +static unsigned int hfi1_poll(struct file *fp, struct poll_table_struct *pt) +{ + struct hfi1_ctxtdata *uctxt; + unsigned pollflag; + + uctxt = ctxt_fp(fp); + if (!uctxt) + pollflag = POLLERR; + else if (uctxt->poll_type == HFI1_POLL_TYPE_URGENT) + pollflag = poll_urgent(fp, pt); + else if (uctxt->poll_type == HFI1_POLL_TYPE_ANYRCV) + pollflag = poll_next(fp, pt); + else /* invalid */ + pollflag = POLLERR; + + return pollflag; +} + +static int hfi1_file_close(struct inode *inode, struct file *fp) +{ + struct hfi1_filedata *fdata = fp->private_data; + struct hfi1_ctxtdata *uctxt = fdata->uctxt; + struct hfi1_devdata *dd; + unsigned long flags, *ev; + + fp->private_data = NULL; + + if (!uctxt) + goto done; + + hfi1_cdbg(PROC, "freeing ctxt %u:%u", uctxt->ctxt, fdata->subctxt); + dd = uctxt->dd; + mutex_lock(&hfi1_mutex); + + flush_wc(); + /* drain user sdma queue */ + if (fdata->pq) + hfi1_user_sdma_free_queues(fdata); + + /* + * Clear any left over, unhandled events so the next process that + * gets this context doesn't get confused. + */ + ev = dd->events + ((uctxt->ctxt - dd->first_user_ctxt) * + HFI1_MAX_SHARED_CTXTS) + fdata->subctxt; + *ev = 0; + + if (--uctxt->cnt) { + uctxt->active_slaves &= ~(1 << fdata->subctxt); + uctxt->subpid[fdata->subctxt] = 0; + mutex_unlock(&hfi1_mutex); + goto done; + } + + spin_lock_irqsave(&dd->uctxt_lock, flags); + /* + * Disable receive context and interrupt available, reset all + * RcvCtxtCtrl bits to default values. + */ + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS | + HFI1_RCVCTRL_TIDFLOW_DIS | + HFI1_RCVCTRL_INTRAVAIL_DIS | + HFI1_RCVCTRL_ONE_PKT_EGR_DIS | + HFI1_RCVCTRL_NO_RHQ_DROP_DIS | + HFI1_RCVCTRL_NO_EGR_DROP_DIS, uctxt->ctxt); + /* Clear the context's J_KEY */ + hfi1_clear_ctxt_jkey(dd, uctxt->ctxt); + /* + * Reset context integrity checks to default. + * (writes to CSRs probably belong in chip.c) + */ + write_kctxt_csr(dd, uctxt->sc->hw_context, SEND_CTXT_CHECK_ENABLE, + hfi1_pkt_default_send_ctxt_mask(dd, uctxt->sc->type)); + sc_disable(uctxt->sc); + uctxt->pid = 0; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + + dd->rcd[uctxt->ctxt] = NULL; + uctxt->rcvwait_to = 0; + uctxt->piowait_to = 0; + uctxt->rcvnowait = 0; + uctxt->pionowait = 0; + uctxt->event_flags = 0; + + hfi1_clear_tids(uctxt); + hfi1_clear_ctxt_pkey(dd, uctxt->ctxt); + + if (uctxt->tid_pg_list) + unlock_exp_tids(uctxt); + + hfi1_stats.sps_ctxts--; + dd->freectxts++; + mutex_unlock(&hfi1_mutex); + hfi1_free_ctxtdata(dd, uctxt); +done: + kfree(fdata); + return 0; +} + +/* + * Convert kernel *virtual* addresses to physical addresses. + * This is used to vmalloc'ed addresses. + */ +static u64 kvirt_to_phys(void *addr) +{ + struct page *page; + u64 paddr = 0; + + page = vmalloc_to_page(addr); + if (page) + paddr = page_to_pfn(page) << PAGE_SHIFT; + + return paddr; +} + +static int assign_ctxt(struct file *fp, struct hfi1_user_info *uinfo) +{ + int i_minor, ret = 0; + unsigned swmajor, swminor, alg = HFI1_ALG_ACROSS; + + swmajor = uinfo->userversion >> 16; + if (swmajor != HFI1_USER_SWMAJOR) { + ret = -ENODEV; + goto done; + } + + swminor = uinfo->userversion & 0xffff; + + if (uinfo->hfi1_alg < HFI1_ALG_COUNT) + alg = uinfo->hfi1_alg; + + mutex_lock(&hfi1_mutex); + /* First, lets check if we need to setup a shared context? */ + if (uinfo->subctxt_cnt) + ret = find_shared_ctxt(fp, uinfo); + + /* + * We execute the following block if we couldn't find a + * shared context or if context sharing is not required. + */ + if (!ret) { + i_minor = iminor(file_inode(fp)) - HFI1_USER_MINOR_BASE; + ret = get_user_context(fp, uinfo, i_minor - 1, alg); + } + mutex_unlock(&hfi1_mutex); +done: + return ret; +} + +static int get_user_context(struct file *fp, struct hfi1_user_info *uinfo, + int devno, unsigned alg) +{ + struct hfi1_devdata *dd = NULL; + int ret = 0, devmax, npresent, nup, dev; + + devmax = hfi1_count_units(&npresent, &nup); + if (!npresent) { + ret = -ENXIO; + goto done; + } + if (!nup) { + ret = -ENETDOWN; + goto done; + } + if (devno >= 0) { + dd = hfi1_lookup(devno); + if (!dd) + ret = -ENODEV; + else if (!dd->freectxts) + ret = -EBUSY; + } else { + struct hfi1_devdata *pdd; + + if (alg == HFI1_ALG_ACROSS) { + unsigned free = 0U; + + for (dev = 0; dev < devmax; dev++) { + pdd = hfi1_lookup(dev); + if (pdd && pdd->freectxts && + pdd->freectxts > free) { + dd = pdd; + free = pdd->freectxts; + } + } + } else { + for (dev = 0; dev < devmax; dev++) { + pdd = hfi1_lookup(dev); + if (pdd && pdd->freectxts) { + dd = pdd; + break; + } + } + } + if (!dd) + ret = -EBUSY; + } +done: + return ret ? ret : allocate_ctxt(fp, dd, uinfo); +} + +static int find_shared_ctxt(struct file *fp, + const struct hfi1_user_info *uinfo) +{ + int devmax, ndev, i; + int ret = 0; + + devmax = hfi1_count_units(NULL, NULL); + + for (ndev = 0; ndev < devmax; ndev++) { + struct hfi1_devdata *dd = hfi1_lookup(ndev); + + /* device portion of usable() */ + if (!(dd && (dd->flags & HFI1_PRESENT) && dd->kregbase)) + continue; + for (i = dd->first_user_ctxt; i < dd->num_rcv_contexts; i++) { + struct hfi1_ctxtdata *uctxt = dd->rcd[i]; + + /* Skip ctxts which are not yet open */ + if (!uctxt || !uctxt->cnt) + continue; + /* Skip ctxt if it doesn't match the requested one */ + if (memcmp(uctxt->uuid, uinfo->uuid, + sizeof(uctxt->uuid)) || + uctxt->subctxt_id != uinfo->subctxt_id || + uctxt->subctxt_cnt != uinfo->subctxt_cnt) + continue; + + /* Verify the sharing process matches the master */ + if (uctxt->userversion != uinfo->userversion || + uctxt->cnt >= uctxt->subctxt_cnt) { + ret = -EINVAL; + goto done; + } + ctxt_fp(fp) = uctxt; + subctxt_fp(fp) = uctxt->cnt++; + uctxt->subpid[subctxt_fp(fp)] = current->pid; + uctxt->active_slaves |= 1 << subctxt_fp(fp); + ret = 1; + goto done; + } + } + +done: + return ret; +} + +static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd, + struct hfi1_user_info *uinfo) +{ + struct hfi1_ctxtdata *uctxt; + unsigned ctxt; + int ret; + + if (dd->flags & HFI1_FROZEN) { + /* + * Pick an error that is unique from all other errors + * that are returned so the user process knows that + * it tried to allocate while the SPC was frozen. It + * it should be able to retry with success in a short + * while. + */ + return -EIO; + } + + for (ctxt = dd->first_user_ctxt; ctxt < dd->num_rcv_contexts; ctxt++) + if (!dd->rcd[ctxt]) + break; + + if (ctxt == dd->num_rcv_contexts) + return -EBUSY; + + uctxt = hfi1_create_ctxtdata(dd->pport, ctxt); + if (!uctxt) { + dd_dev_err(dd, + "Unable to allocate ctxtdata memory, failing open\n"); + return -ENOMEM; + } + /* + * Allocate and enable a PIO send context. + */ + uctxt->sc = sc_alloc(dd, SC_USER, uctxt->rcvhdrqentsize, + uctxt->numa_id); + if (!uctxt->sc) + return -ENOMEM; + + dbg("allocated send context %u(%u)\n", uctxt->sc->sw_index, + uctxt->sc->hw_context); + ret = sc_enable(uctxt->sc); + if (ret) + return ret; + /* + * Setup shared context resources if the user-level has requested + * shared contexts and this is the 'master' process. + * This has to be done here so the rest of the sub-contexts find the + * proper master. + */ + if (uinfo->subctxt_cnt && !subctxt_fp(fp)) { + ret = init_subctxts(uctxt, uinfo); + /* + * On error, we don't need to disable and de-allocate the + * send context because it will be done during file close + */ + if (ret) + return ret; + } + uctxt->userversion = uinfo->userversion; + uctxt->pid = current->pid; + uctxt->flags = HFI1_CAP_UGET(MASK); + init_waitqueue_head(&uctxt->wait); + strlcpy(uctxt->comm, current->comm, sizeof(uctxt->comm)); + memcpy(uctxt->uuid, uinfo->uuid, sizeof(uctxt->uuid)); + uctxt->jkey = generate_jkey(current_uid()); + INIT_LIST_HEAD(&uctxt->sdma_queues); + spin_lock_init(&uctxt->sdma_qlock); + hfi1_stats.sps_ctxts++; + dd->freectxts--; + ctxt_fp(fp) = uctxt; + + return 0; +} + +static int init_subctxts(struct hfi1_ctxtdata *uctxt, + const struct hfi1_user_info *uinfo) +{ + int ret = 0; + unsigned num_subctxts; + + num_subctxts = uinfo->subctxt_cnt; + if (num_subctxts > HFI1_MAX_SHARED_CTXTS) { + ret = -EINVAL; + goto bail; + } + + uctxt->subctxt_cnt = uinfo->subctxt_cnt; + uctxt->subctxt_id = uinfo->subctxt_id; + uctxt->active_slaves = 1; + uctxt->redirect_seq_cnt = 1; + set_bit(HFI1_CTXT_MASTER_UNINIT, &uctxt->event_flags); +bail: + return ret; +} + +static int setup_subctxt(struct hfi1_ctxtdata *uctxt) +{ + int ret = 0; + unsigned num_subctxts = uctxt->subctxt_cnt; + + uctxt->subctxt_uregbase = vmalloc_user(PAGE_SIZE); + if (!uctxt->subctxt_uregbase) { + ret = -ENOMEM; + goto bail; + } + /* We can take the size of the RcvHdr Queue from the master */ + uctxt->subctxt_rcvhdr_base = vmalloc_user(uctxt->rcvhdrq_size * + num_subctxts); + if (!uctxt->subctxt_rcvhdr_base) { + ret = -ENOMEM; + goto bail_ureg; + } + + uctxt->subctxt_rcvegrbuf = vmalloc_user(uctxt->egrbufs.size * + num_subctxts); + if (!uctxt->subctxt_rcvegrbuf) { + ret = -ENOMEM; + goto bail_rhdr; + } + goto bail; +bail_rhdr: + vfree(uctxt->subctxt_rcvhdr_base); +bail_ureg: + vfree(uctxt->subctxt_uregbase); + uctxt->subctxt_uregbase = NULL; +bail: + return ret; +} + +static int user_init(struct file *fp) +{ + int ret; + unsigned int rcvctrl_ops = 0; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + + /* make sure that the context has already been setup */ + if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags)) { + ret = -EFAULT; + goto done; + } + + /* + * Subctxts don't need to initialize anything since master + * has done it. + */ + if (subctxt_fp(fp)) { + ret = wait_event_interruptible(uctxt->wait, + !test_bit(HFI1_CTXT_MASTER_UNINIT, + &uctxt->event_flags)); + goto done; + } + + /* initialize poll variables... */ + uctxt->urgent = 0; + uctxt->urgent_poll = 0; + + /* + * Now enable the ctxt for receive. + * For chips that are set to DMA the tail register to memory + * when they change (and when the update bit transitions from + * 0 to 1. So for those chips, we turn it off and then back on. + * This will (very briefly) affect any other open ctxts, but the + * duration is very short, and therefore isn't an issue. We + * explicitly set the in-memory tail copy to 0 beforehand, so we + * don't have to wait to be sure the DMA update has happened + * (chip resets head/tail to 0 on transition to enable). + */ + if (uctxt->rcvhdrtail_kvaddr) + clear_rcvhdrtail(uctxt); + + /* Setup J_KEY before enabling the context */ + hfi1_set_ctxt_jkey(uctxt->dd, uctxt->ctxt, uctxt->jkey); + + rcvctrl_ops = HFI1_RCVCTRL_CTXT_ENB; + if (HFI1_CAP_KGET_MASK(uctxt->flags, HDRSUPP)) + rcvctrl_ops |= HFI1_RCVCTRL_TIDFLOW_ENB; + /* + * Ignore the bit in the flags for now until proper + * support for multiple packet per rcv array entry is + * added. + */ + if (!HFI1_CAP_KGET_MASK(uctxt->flags, MULTI_PKT_EGR)) + rcvctrl_ops |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB; + if (HFI1_CAP_KGET_MASK(uctxt->flags, NODROP_EGR_FULL)) + rcvctrl_ops |= HFI1_RCVCTRL_NO_EGR_DROP_ENB; + if (HFI1_CAP_KGET_MASK(uctxt->flags, NODROP_RHQ_FULL)) + rcvctrl_ops |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB; + if (HFI1_CAP_KGET_MASK(uctxt->flags, DMA_RTAIL)) + rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_ENB; + hfi1_rcvctrl(uctxt->dd, rcvctrl_ops, uctxt->ctxt); + + /* Notify any waiting slaves */ + if (uctxt->subctxt_cnt) { + clear_bit(HFI1_CTXT_MASTER_UNINIT, &uctxt->event_flags); + wake_up(&uctxt->wait); + } + ret = 0; + +done: + return ret; +} + +static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len) +{ + struct hfi1_ctxt_info cinfo; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_filedata *fd = fp->private_data; + int ret = 0; + + ret = hfi1_get_base_kinfo(uctxt, &cinfo); + if (ret < 0) + goto done; + cinfo.num_active = hfi1_count_active_units(); + cinfo.unit = uctxt->dd->unit; + cinfo.ctxt = uctxt->ctxt; + cinfo.subctxt = subctxt_fp(fp); + cinfo.rcvtids = roundup(uctxt->egrbufs.alloced, + uctxt->dd->rcv_entries.group_size) + + uctxt->expected_count; + cinfo.credits = uctxt->sc->credits; + cinfo.numa_node = uctxt->numa_id; + cinfo.rec_cpu = fd->rec_cpu_num; + cinfo.send_ctxt = uctxt->sc->hw_context; + + cinfo.egrtids = uctxt->egrbufs.alloced; + cinfo.rcvhdrq_cnt = uctxt->rcvhdrq_cnt; + cinfo.rcvhdrq_entsize = uctxt->rcvhdrqentsize << 2; + cinfo.sdma_ring_size = user_sdma_comp_fp(fp)->nentries; + cinfo.rcvegr_size = uctxt->egrbufs.rcvtid_size; + + trace_hfi1_ctxt_info(uctxt->dd, uctxt->ctxt, subctxt_fp(fp), cinfo); + if (copy_to_user(ubase, &cinfo, sizeof(cinfo))) + ret = -EFAULT; +done: + return ret; +} + +static int setup_ctxt(struct file *fp) +{ + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + int ret = 0; + + /* + * Context should be set up only once (including allocation and + * programming of eager buffers. This is done if context sharing + * is not requested or by the master process. + */ + if (!uctxt->subctxt_cnt || !subctxt_fp(fp)) { + ret = hfi1_init_ctxt(uctxt->sc); + if (ret) + goto done; + + /* Now allocate the RcvHdr queue and eager buffers. */ + ret = hfi1_create_rcvhdrq(dd, uctxt); + if (ret) + goto done; + ret = hfi1_setup_eagerbufs(uctxt); + if (ret) + goto done; + if (uctxt->subctxt_cnt && !subctxt_fp(fp)) { + ret = setup_subctxt(uctxt); + if (ret) + goto done; + } + /* Setup Expected Rcv memories */ + uctxt->tid_pg_list = vzalloc(uctxt->expected_count * + sizeof(struct page **)); + if (!uctxt->tid_pg_list) { + ret = -ENOMEM; + goto done; + } + uctxt->physshadow = vzalloc(uctxt->expected_count * + sizeof(*uctxt->physshadow)); + if (!uctxt->physshadow) { + ret = -ENOMEM; + goto done; + } + /* allocate expected TID map and initialize the cursor */ + atomic_set(&uctxt->tidcursor, 0); + uctxt->numtidgroups = uctxt->expected_count / + dd->rcv_entries.group_size; + uctxt->tidmapcnt = uctxt->numtidgroups / BITS_PER_LONG + + !!(uctxt->numtidgroups % BITS_PER_LONG); + uctxt->tidusemap = kzalloc_node(uctxt->tidmapcnt * + sizeof(*uctxt->tidusemap), + GFP_KERNEL, uctxt->numa_id); + if (!uctxt->tidusemap) { + ret = -ENOMEM; + goto done; + } + /* + * In case that the number of groups is not a multiple of + * 64 (the number of groups in a tidusemap element), mark + * the extra ones as used. This will effectively make them + * permanently used and should never be assigned. Otherwise, + * the code which checks how many free groups we have will + * get completely confused about the state of the bits. + */ + if (uctxt->numtidgroups % BITS_PER_LONG) + uctxt->tidusemap[uctxt->tidmapcnt - 1] = + ~((1ULL << (uctxt->numtidgroups % + BITS_PER_LONG)) - 1); + trace_hfi1_exp_tid_map(uctxt->ctxt, subctxt_fp(fp), 0, + uctxt->tidusemap, uctxt->tidmapcnt); + } + ret = hfi1_user_sdma_alloc_queues(uctxt, fp); + if (ret) + goto done; + + set_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags); +done: + return ret; +} + +static int get_base_info(struct file *fp, void __user *ubase, __u32 len) +{ + struct hfi1_base_info binfo; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + ssize_t sz; + unsigned offset; + int ret = 0; + + trace_hfi1_uctxtdata(uctxt->dd, uctxt); + + memset(&binfo, 0, sizeof(binfo)); + binfo.hw_version = dd->revision; + binfo.sw_version = HFI1_KERN_SWVERSION; + binfo.bthqp = kdeth_qp; + binfo.jkey = uctxt->jkey; + /* + * If more than 64 contexts are enabled the allocated credit + * return will span two or three contiguous pages. Since we only + * map the page containing the context's credit return address, + * we need to calculate the offset in the proper page. + */ + offset = ((u64)uctxt->sc->hw_free - + (u64)dd->cr_base[uctxt->numa_id].va) % PAGE_SIZE; + binfo.sc_credits_addr = HFI1_MMAP_TOKEN(PIO_CRED, uctxt->ctxt, + subctxt_fp(fp), offset); + binfo.pio_bufbase = HFI1_MMAP_TOKEN(PIO_BUFS, uctxt->ctxt, + subctxt_fp(fp), + uctxt->sc->base_addr); + binfo.pio_bufbase_sop = HFI1_MMAP_TOKEN(PIO_BUFS_SOP, + uctxt->ctxt, + subctxt_fp(fp), + uctxt->sc->base_addr); + binfo.rcvhdr_bufbase = HFI1_MMAP_TOKEN(RCV_HDRQ, uctxt->ctxt, + subctxt_fp(fp), + uctxt->rcvhdrq); + binfo.rcvegr_bufbase = HFI1_MMAP_TOKEN(RCV_EGRBUF, uctxt->ctxt, + subctxt_fp(fp), + uctxt->egrbufs.rcvtids[0].phys); + binfo.sdma_comp_bufbase = HFI1_MMAP_TOKEN(SDMA_COMP, uctxt->ctxt, + subctxt_fp(fp), 0); + /* + * user regs are at + * (RXE_PER_CONTEXT_USER + (ctxt * RXE_PER_CONTEXT_SIZE)) + */ + binfo.user_regbase = HFI1_MMAP_TOKEN(UREGS, uctxt->ctxt, + subctxt_fp(fp), 0); + offset = ((((uctxt->ctxt - dd->first_user_ctxt) * + HFI1_MAX_SHARED_CTXTS) + subctxt_fp(fp)) * + sizeof(*dd->events)) & ~PAGE_MASK; + binfo.events_bufbase = HFI1_MMAP_TOKEN(EVENTS, uctxt->ctxt, + subctxt_fp(fp), + offset); + binfo.status_bufbase = HFI1_MMAP_TOKEN(STATUS, uctxt->ctxt, + subctxt_fp(fp), + dd->status); + if (HFI1_CAP_IS_USET(DMA_RTAIL)) + binfo.rcvhdrtail_base = HFI1_MMAP_TOKEN(RTAIL, uctxt->ctxt, + subctxt_fp(fp), 0); + if (uctxt->subctxt_cnt) { + binfo.subctxt_uregbase = HFI1_MMAP_TOKEN(SUBCTXT_UREGS, + uctxt->ctxt, + subctxt_fp(fp), 0); + binfo.subctxt_rcvhdrbuf = HFI1_MMAP_TOKEN(SUBCTXT_RCV_HDRQ, + uctxt->ctxt, + subctxt_fp(fp), 0); + binfo.subctxt_rcvegrbuf = HFI1_MMAP_TOKEN(SUBCTXT_EGRBUF, + uctxt->ctxt, + subctxt_fp(fp), 0); + } + sz = (len < sizeof(binfo)) ? len : sizeof(binfo); + if (copy_to_user(ubase, &binfo, sz)) + ret = -EFAULT; + return ret; +} + +static unsigned int poll_urgent(struct file *fp, + struct poll_table_struct *pt) +{ + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + unsigned pollflag; + + poll_wait(fp, &uctxt->wait, pt); + + spin_lock_irq(&dd->uctxt_lock); + if (uctxt->urgent != uctxt->urgent_poll) { + pollflag = POLLIN | POLLRDNORM; + uctxt->urgent_poll = uctxt->urgent; + } else { + pollflag = 0; + set_bit(HFI1_CTXT_WAITING_URG, &uctxt->event_flags); + } + spin_unlock_irq(&dd->uctxt_lock); + + return pollflag; +} + +static unsigned int poll_next(struct file *fp, + struct poll_table_struct *pt) +{ + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + unsigned pollflag; + + poll_wait(fp, &uctxt->wait, pt); + + spin_lock_irq(&dd->uctxt_lock); + if (hdrqempty(uctxt)) { + set_bit(HFI1_CTXT_WAITING_RCV, &uctxt->event_flags); + hfi1_rcvctrl(dd, HFI1_RCVCTRL_INTRAVAIL_ENB, uctxt->ctxt); + pollflag = 0; + } else + pollflag = POLLIN | POLLRDNORM; + spin_unlock_irq(&dd->uctxt_lock); + + return pollflag; +} + +/* + * Find all user contexts in use, and set the specified bit in their + * event mask. + * See also find_ctxt() for a similar use, that is specific to send buffers. + */ +int hfi1_set_uevent_bits(struct hfi1_pportdata *ppd, const int evtbit) +{ + struct hfi1_ctxtdata *uctxt; + struct hfi1_devdata *dd = ppd->dd; + unsigned ctxt; + int ret = 0; + unsigned long flags; + + if (!dd->events) { + ret = -EINVAL; + goto done; + } + + spin_lock_irqsave(&dd->uctxt_lock, flags); + for (ctxt = dd->first_user_ctxt; ctxt < dd->num_rcv_contexts; + ctxt++) { + uctxt = dd->rcd[ctxt]; + if (uctxt) { + unsigned long *evs = dd->events + + (uctxt->ctxt - dd->first_user_ctxt) * + HFI1_MAX_SHARED_CTXTS; + int i; + /* + * subctxt_cnt is 0 if not shared, so do base + * separately, first, then remaining subctxt, if any + */ + set_bit(evtbit, evs); + for (i = 1; i < uctxt->subctxt_cnt; i++) + set_bit(evtbit, evs + i); + } + } + spin_unlock_irqrestore(&dd->uctxt_lock, flags); +done: + return ret; +} + +/** + * manage_rcvq - manage a context's receive queue + * @uctxt: the context + * @subctxt: the sub-context + * @start_stop: action to carry out + * + * start_stop == 0 disables receive on the context, for use in queue + * overflow conditions. start_stop==1 re-enables, to be used to + * re-init the software copy of the head register + */ +static int manage_rcvq(struct hfi1_ctxtdata *uctxt, unsigned subctxt, + int start_stop) +{ + struct hfi1_devdata *dd = uctxt->dd; + unsigned int rcvctrl_op; + + if (subctxt) + goto bail; + /* atomically clear receive enable ctxt. */ + if (start_stop) { + /* + * On enable, force in-memory copy of the tail register to + * 0, so that protocol code doesn't have to worry about + * whether or not the chip has yet updated the in-memory + * copy or not on return from the system call. The chip + * always resets it's tail register back to 0 on a + * transition from disabled to enabled. + */ + if (uctxt->rcvhdrtail_kvaddr) + clear_rcvhdrtail(uctxt); + rcvctrl_op = HFI1_RCVCTRL_CTXT_ENB; + } else + rcvctrl_op = HFI1_RCVCTRL_CTXT_DIS; + hfi1_rcvctrl(dd, rcvctrl_op, uctxt->ctxt); + /* always; new head should be equal to new tail; see above */ +bail: + return 0; +} + +/* + * clear the event notifier events for this context. + * User process then performs actions appropriate to bit having been + * set, if desired, and checks again in future. + */ +static int user_event_ack(struct hfi1_ctxtdata *uctxt, int subctxt, + unsigned long events) +{ + int i; + struct hfi1_devdata *dd = uctxt->dd; + unsigned long *evs; + + if (!dd->events) + return 0; + + evs = dd->events + ((uctxt->ctxt - dd->first_user_ctxt) * + HFI1_MAX_SHARED_CTXTS) + subctxt; + + for (i = 0; i <= _HFI1_MAX_EVENT_BIT; i++) { + if (!test_bit(i, &events)) + continue; + clear_bit(i, evs); + } + return 0; +} + +#define num_user_pages(vaddr, len) \ + (1 + (((((unsigned long)(vaddr) + \ + (unsigned long)(len) - 1) & PAGE_MASK) - \ + ((unsigned long)vaddr & PAGE_MASK)) >> PAGE_SHIFT)) + +/** + * tzcnt - count the number of trailing zeros in a 64bit value + * @value: the value to be examined + * + * Returns the number of trailing least significant zeros in the + * the input value. If the value is zero, return the number of + * bits of the value. + */ +static inline u8 tzcnt(u64 value) +{ + return value ? __builtin_ctzl(value) : sizeof(value) * 8; +} + +static inline unsigned num_free_groups(unsigned long map, u16 *start) +{ + unsigned free; + u16 bitidx = *start; + + if (bitidx >= BITS_PER_LONG) + return 0; + /* "Turn off" any bits set before our bit index */ + map &= ~((1ULL << bitidx) - 1); + free = tzcnt(map) - bitidx; + while (!free && bitidx < BITS_PER_LONG) { + /* Zero out the last set bit so we look at the rest */ + map &= ~(1ULL << bitidx); + /* + * Account for the previously checked bits and advance + * the bit index. We don't have to check for bitidx + * getting bigger than BITS_PER_LONG here as it would + * mean extra instructions that we don't need. If it + * did happen, it would push free to a negative value + * which will break the loop. + */ + free = tzcnt(map) - ++bitidx; + } + *start = bitidx; + return free; +} + +static int exp_tid_setup(struct file *fp, struct hfi1_tid_info *tinfo) +{ + int ret = 0; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + unsigned tid, mapped = 0, npages, ngroups, exp_groups, + tidpairs = uctxt->expected_count / 2; + struct page **pages; + unsigned long vaddr, tidmap[uctxt->tidmapcnt]; + dma_addr_t *phys; + u32 tidlist[tidpairs], pairidx = 0, tidcursor; + u16 useidx, idx, bitidx, tidcnt = 0; + + vaddr = tinfo->vaddr; + + if (vaddr & ~PAGE_MASK) { + ret = -EINVAL; + goto bail; + } + + npages = num_user_pages(vaddr, tinfo->length); + if (!npages) { + ret = -EINVAL; + goto bail; + } + if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, + npages * PAGE_SIZE)) { + dd_dev_err(dd, "Fail vaddr %p, %u pages, !access_ok\n", + (void *)vaddr, npages); + ret = -EFAULT; + goto bail; + } + + memset(tidmap, 0, sizeof(tidmap[0]) * uctxt->tidmapcnt); + memset(tidlist, 0, sizeof(tidlist[0]) * tidpairs); + + exp_groups = uctxt->expected_count / dd->rcv_entries.group_size; + /* which group set do we look at first? */ + tidcursor = atomic_read(&uctxt->tidcursor); + useidx = (tidcursor >> 16) & 0xffff; + bitidx = tidcursor & 0xffff; + + /* + * Keep going until we've mapped all pages or we've exhausted all + * RcvArray entries. + * This iterates over the number of tidmaps + 1 + * (idx <= uctxt->tidmapcnt) so we check the bitmap which we + * started from one more time for any free bits before the + * starting point bit. + */ + for (mapped = 0, idx = 0; + mapped < npages && idx <= uctxt->tidmapcnt;) { + u64 i, offset = 0; + unsigned free, pinned, pmapped = 0, bits_used; + u16 grp; + + /* + * "Reserve" the needed group bits under lock so other + * processes can't step in the middle of it. Once + * reserved, we don't need the lock anymore since we + * are guaranteed the groups. + */ + spin_lock(&uctxt->exp_lock); + if (uctxt->tidusemap[useidx] == -1ULL || + bitidx >= BITS_PER_LONG) { + /* no free groups in the set, use the next */ + useidx = (useidx + 1) % uctxt->tidmapcnt; + idx++; + bitidx = 0; + spin_unlock(&uctxt->exp_lock); + continue; + } + ngroups = ((npages - mapped) / dd->rcv_entries.group_size) + + !!((npages - mapped) % dd->rcv_entries.group_size); + + /* + * If we've gotten here, the current set of groups does have + * one or more free groups. + */ + free = num_free_groups(uctxt->tidusemap[useidx], &bitidx); + if (!free) { + /* + * Despite the check above, free could still come back + * as 0 because we don't check the entire bitmap but + * we start from bitidx. + */ + spin_unlock(&uctxt->exp_lock); + continue; + } + bits_used = min(free, ngroups); + tidmap[useidx] |= ((1ULL << bits_used) - 1) << bitidx; + uctxt->tidusemap[useidx] |= tidmap[useidx]; + spin_unlock(&uctxt->exp_lock); + + /* + * At this point, we know where in the map we have free bits. + * properly offset into the various "shadow" arrays and compute + * the RcvArray entry index. + */ + offset = ((useidx * BITS_PER_LONG) + bitidx) * + dd->rcv_entries.group_size; + pages = uctxt->tid_pg_list + offset; + phys = uctxt->physshadow + offset; + tid = uctxt->expected_base + offset; + + /* Calculate how many pages we can pin based on free bits */ + pinned = min((bits_used * dd->rcv_entries.group_size), + (npages - mapped)); + /* + * Now that we know how many free RcvArray entries we have, + * we can pin that many user pages. + */ + ret = hfi1_get_user_pages(vaddr + (mapped * PAGE_SIZE), + pinned, pages); + if (ret) { + /* + * We can't continue because the pages array won't be + * initialized. This should never happen, + * unless perhaps the user has mpin'ed the pages + * themselves. + */ + dd_dev_info(dd, + "Failed to lock addr %p, %u pages: errno %d\n", + (void *) vaddr, pinned, -ret); + /* + * Let go of the bits that we reserved since we are not + * going to use them. + */ + spin_lock(&uctxt->exp_lock); + uctxt->tidusemap[useidx] &= + ~(((1ULL << bits_used) - 1) << bitidx); + spin_unlock(&uctxt->exp_lock); + goto done; + } + /* + * How many groups do we need based on how many pages we have + * pinned? + */ + ngroups = (pinned / dd->rcv_entries.group_size) + + !!(pinned % dd->rcv_entries.group_size); + /* + * Keep programming RcvArray entries for all the <ngroups> free + * groups. + */ + for (i = 0, grp = 0; grp < ngroups; i++, grp++) { + unsigned j; + u32 pair_size = 0, tidsize; + /* + * This inner loop will program an entire group or the + * array of pinned pages (which ever limit is hit + * first). + */ + for (j = 0; j < dd->rcv_entries.group_size && + pmapped < pinned; j++, pmapped++, tid++) { + tidsize = PAGE_SIZE; + phys[pmapped] = hfi1_map_page(dd->pcidev, + pages[pmapped], 0, + tidsize, PCI_DMA_FROMDEVICE); + trace_hfi1_exp_rcv_set(uctxt->ctxt, + subctxt_fp(fp), + tid, vaddr, + phys[pmapped], + pages[pmapped]); + /* + * Each RcvArray entry is programmed with one + * page * worth of memory. This will handle + * the 8K MTU as well as anything smaller + * due to the fact that both entries in the + * RcvTidPair are programmed with a page. + * PSM currently does not handle anything + * bigger than 8K MTU, so should we even worry + * about 10K here? + */ + hfi1_put_tid(dd, tid, PT_EXPECTED, + phys[pmapped], + ilog2(tidsize >> PAGE_SHIFT) + 1); + pair_size += tidsize >> PAGE_SHIFT; + EXP_TID_RESET(tidlist[pairidx], LEN, pair_size); + if (!(tid % 2)) { + tidlist[pairidx] |= + EXP_TID_SET(IDX, + (tid - uctxt->expected_base) + / 2); + tidlist[pairidx] |= + EXP_TID_SET(CTRL, 1); + tidcnt++; + } else { + tidlist[pairidx] |= + EXP_TID_SET(CTRL, 2); + pair_size = 0; + pairidx++; + } + } + /* + * We've programmed the entire group (or as much of the + * group as we'll use. Now, it's time to push it out... + */ + flush_wc(); + } + mapped += pinned; + atomic_set(&uctxt->tidcursor, + (((useidx & 0xffffff) << 16) | + ((bitidx + bits_used) & 0xffffff))); + } + trace_hfi1_exp_tid_map(uctxt->ctxt, subctxt_fp(fp), 0, uctxt->tidusemap, + uctxt->tidmapcnt); + +done: + /* If we've mapped anything, copy relevant info to user */ + if (mapped) { + if (copy_to_user((void __user *)(unsigned long)tinfo->tidlist, + tidlist, sizeof(tidlist[0]) * tidcnt)) { + ret = -EFAULT; + goto done; + } + /* copy TID info to user */ + if (copy_to_user((void __user *)(unsigned long)tinfo->tidmap, + tidmap, sizeof(tidmap[0]) * uctxt->tidmapcnt)) + ret = -EFAULT; + } +bail: + /* + * Calculate mapped length. New Exp TID protocol does not "unwind" and + * report an error if it can't map the entire buffer. It just reports + * the length that was mapped. + */ + tinfo->length = mapped * PAGE_SIZE; + tinfo->tidcnt = tidcnt; + return ret; +} + +static int exp_tid_free(struct file *fp, struct hfi1_tid_info *tinfo) +{ + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_devdata *dd = uctxt->dd; + unsigned long tidmap[uctxt->tidmapcnt]; + struct page **pages; + dma_addr_t *phys; + u16 idx, bitidx, tid; + int ret = 0; + + if (copy_from_user(&tidmap, (void __user *)(unsigned long) + tinfo->tidmap, + sizeof(tidmap[0]) * uctxt->tidmapcnt)) { + ret = -EFAULT; + goto done; + } + for (idx = 0; idx < uctxt->tidmapcnt; idx++) { + unsigned long map; + + bitidx = 0; + if (!tidmap[idx]) + continue; + map = tidmap[idx]; + while ((bitidx = tzcnt(map)) < BITS_PER_LONG) { + int i, pcount = 0; + struct page *pshadow[dd->rcv_entries.group_size]; + unsigned offset = ((idx * BITS_PER_LONG) + bitidx) * + dd->rcv_entries.group_size; + + pages = uctxt->tid_pg_list + offset; + phys = uctxt->physshadow + offset; + tid = uctxt->expected_base + offset; + for (i = 0; i < dd->rcv_entries.group_size; + i++, tid++) { + if (pages[i]) { + hfi1_put_tid(dd, tid, PT_INVALID, + 0, 0); + trace_hfi1_exp_rcv_free(uctxt->ctxt, + subctxt_fp(fp), + tid, phys[i], + pages[i]); + pci_unmap_page(dd->pcidev, phys[i], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + pshadow[pcount] = pages[i]; + pages[i] = NULL; + pcount++; + phys[i] = 0; + } + } + flush_wc(); + hfi1_release_user_pages(pshadow, pcount); + clear_bit(bitidx, &uctxt->tidusemap[idx]); + map &= ~(1ULL<<bitidx); + } + } + trace_hfi1_exp_tid_map(uctxt->ctxt, subctxt_fp(fp), 1, uctxt->tidusemap, + uctxt->tidmapcnt); +done: + return ret; +} + +static void unlock_exp_tids(struct hfi1_ctxtdata *uctxt) +{ + struct hfi1_devdata *dd = uctxt->dd; + unsigned tid; + + dd_dev_info(dd, "ctxt %u unlocking any locked expTID pages\n", + uctxt->ctxt); + for (tid = 0; tid < uctxt->expected_count; tid++) { + struct page *p = uctxt->tid_pg_list[tid]; + dma_addr_t phys; + + if (!p) + continue; + + phys = uctxt->physshadow[tid]; + uctxt->physshadow[tid] = 0; + uctxt->tid_pg_list[tid] = NULL; + pci_unmap_page(dd->pcidev, phys, PAGE_SIZE, PCI_DMA_FROMDEVICE); + hfi1_release_user_pages(&p, 1); + } +} + +static int set_ctxt_pkey(struct hfi1_ctxtdata *uctxt, unsigned subctxt, + u16 pkey) +{ + int ret = -ENOENT, i, intable = 0; + struct hfi1_pportdata *ppd = uctxt->ppd; + struct hfi1_devdata *dd = uctxt->dd; + + if (pkey == LIM_MGMT_P_KEY || pkey == FULL_MGMT_P_KEY) { + ret = -EINVAL; + goto done; + } + + for (i = 0; i < ARRAY_SIZE(ppd->pkeys); i++) + if (pkey == ppd->pkeys[i]) { + intable = 1; + break; + } + + if (intable) + ret = hfi1_set_ctxt_pkey(dd, uctxt->ctxt, pkey); +done: + return ret; +} + +static int ui_open(struct inode *inode, struct file *filp) +{ + struct hfi1_devdata *dd; + + dd = container_of(inode->i_cdev, struct hfi1_devdata, ui_cdev); + filp->private_data = dd; /* for other methods */ + return 0; +} + +static int ui_release(struct inode *inode, struct file *filp) +{ + /* nothing to do */ + return 0; +} + +static loff_t ui_lseek(struct file *filp, loff_t offset, int whence) +{ + struct hfi1_devdata *dd = filp->private_data; + + switch (whence) { + case SEEK_SET: + break; + case SEEK_CUR: + offset += filp->f_pos; + break; + case SEEK_END: + offset = ((dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE) - + offset; + break; + default: + return -EINVAL; + } + + if (offset < 0) + return -EINVAL; + + if (offset >= (dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE) + return -EINVAL; + + filp->f_pos = offset; + + return filp->f_pos; +} + + +/* NOTE: assumes unsigned long is 8 bytes */ +static ssize_t ui_read(struct file *filp, char __user *buf, size_t count, + loff_t *f_pos) +{ + struct hfi1_devdata *dd = filp->private_data; + void __iomem *base = dd->kregbase; + unsigned long total, csr_off, + barlen = (dd->kregend - dd->kregbase); + u64 data; + + /* only read 8 byte quantities */ + if ((count % 8) != 0) + return -EINVAL; + /* offset must be 8-byte aligned */ + if ((*f_pos % 8) != 0) + return -EINVAL; + /* destination buffer must be 8-byte aligned */ + if ((unsigned long)buf % 8 != 0) + return -EINVAL; + /* must be in range */ + if (*f_pos + count > (barlen + DC8051_DATA_MEM_SIZE)) + return -EINVAL; + /* only set the base if we are not starting past the BAR */ + if (*f_pos < barlen) + base += *f_pos; + csr_off = *f_pos; + for (total = 0; total < count; total += 8, csr_off += 8) { + /* accessing LCB CSRs requires more checks */ + if (is_lcb_offset(csr_off)) { + if (read_lcb_csr(dd, csr_off, (u64 *)&data)) + break; /* failed */ + } + /* + * Cannot read ASIC GPIO/QSFP* clear and force CSRs without a + * false parity error. Avoid the whole issue by not reading + * them. These registers are defined as having a read value + * of 0. + */ + else if (csr_off == ASIC_GPIO_CLEAR + || csr_off == ASIC_GPIO_FORCE + || csr_off == ASIC_QSFP1_CLEAR + || csr_off == ASIC_QSFP1_FORCE + || csr_off == ASIC_QSFP2_CLEAR + || csr_off == ASIC_QSFP2_FORCE) + data = 0; + else if (csr_off >= barlen) { + /* + * read_8051_data can read more than just 8 bytes at + * a time. However, folding this into the loop and + * handling the reads in 8 byte increments allows us + * to smoothly transition from chip memory to 8051 + * memory. + */ + if (read_8051_data(dd, + (u32)(csr_off - barlen), + sizeof(data), &data)) + break; /* failed */ + } else + data = readq(base + total); + if (put_user(data, (unsigned long __user *)(buf + total))) + break; + } + *f_pos += total; + return total; +} + +/* NOTE: assumes unsigned long is 8 bytes */ +static ssize_t ui_write(struct file *filp, const char __user *buf, + size_t count, loff_t *f_pos) +{ + struct hfi1_devdata *dd = filp->private_data; + void __iomem *base; + unsigned long total, data, csr_off; + int in_lcb; + + /* only write 8 byte quantities */ + if ((count % 8) != 0) + return -EINVAL; + /* offset must be 8-byte aligned */ + if ((*f_pos % 8) != 0) + return -EINVAL; + /* source buffer must be 8-byte aligned */ + if ((unsigned long)buf % 8 != 0) + return -EINVAL; + /* must be in range */ + if (*f_pos + count > dd->kregend - dd->kregbase) + return -EINVAL; + + base = (void __iomem *)dd->kregbase + *f_pos; + csr_off = *f_pos; + in_lcb = 0; + for (total = 0; total < count; total += 8, csr_off += 8) { + if (get_user(data, (unsigned long __user *)(buf + total))) + break; + /* accessing LCB CSRs requires a special procedure */ + if (is_lcb_offset(csr_off)) { + if (!in_lcb) { + int ret = acquire_lcb_access(dd, 1); + + if (ret) + break; + in_lcb = 1; + } + } else { + if (in_lcb) { + release_lcb_access(dd, 1); + in_lcb = 0; + } + } + writeq(data, base + total); + } + if (in_lcb) + release_lcb_access(dd, 1); + *f_pos += total; + return total; +} + +static const struct file_operations ui_file_ops = { + .owner = THIS_MODULE, + .llseek = ui_lseek, + .read = ui_read, + .write = ui_write, + .open = ui_open, + .release = ui_release, +}; +#define UI_OFFSET 192 /* device minor offset for UI devices */ +static int create_ui = 1; + +static struct cdev wildcard_cdev; +static struct device *wildcard_device; + +static atomic_t user_count = ATOMIC_INIT(0); + +static void user_remove(struct hfi1_devdata *dd) +{ + if (atomic_dec_return(&user_count) == 0) + hfi1_cdev_cleanup(&wildcard_cdev, &wildcard_device); + + hfi1_cdev_cleanup(&dd->user_cdev, &dd->user_device); + hfi1_cdev_cleanup(&dd->ui_cdev, &dd->ui_device); +} + +static int user_add(struct hfi1_devdata *dd) +{ + char name[10]; + int ret; + + if (atomic_inc_return(&user_count) == 1) { + ret = hfi1_cdev_init(0, class_name(), &hfi1_file_ops, + &wildcard_cdev, &wildcard_device); + if (ret) + goto done; + } + + snprintf(name, sizeof(name), "%s_%d", class_name(), dd->unit); + ret = hfi1_cdev_init(dd->unit + 1, name, &hfi1_file_ops, + &dd->user_cdev, &dd->user_device); + if (ret) + goto done; + + if (create_ui) { + snprintf(name, sizeof(name), + "%s_ui%d", class_name(), dd->unit); + ret = hfi1_cdev_init(dd->unit + UI_OFFSET, name, &ui_file_ops, + &dd->ui_cdev, &dd->ui_device); + if (ret) + goto done; + } + + return 0; +done: + user_remove(dd); + return ret; +} + +/* + * Create per-unit files in /dev + */ +int hfi1_device_create(struct hfi1_devdata *dd) +{ + int r, ret; + + r = user_add(dd); + ret = hfi1_diag_add(dd); + if (r && !ret) + ret = r; + return ret; +} + +/* + * Remove per-unit files in /dev + * void, core kernel returns no errors for this stuff + */ +void hfi1_device_remove(struct hfi1_devdata *dd) +{ + user_remove(dd); + hfi1_diag_remove(dd); +} diff --git a/drivers/staging/rdma/hfi1/firmware.c b/drivers/staging/rdma/hfi1/firmware.c new file mode 100644 index 000000000000..5c2f2ed8f224 --- /dev/null +++ b/drivers/staging/rdma/hfi1/firmware.c @@ -0,0 +1,1620 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/firmware.h> +#include <linux/mutex.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/crc32.h> + +#include "hfi.h" +#include "trace.h" + +/* + * Make it easy to toggle firmware file name and if it gets loaded by + * editing the following. This may be something we do while in development + * but not necessarily something a user would ever need to use. + */ +#define DEFAULT_FW_8051_NAME_FPGA "hfi_dc8051.bin" +#define DEFAULT_FW_8051_NAME_ASIC "hfi1_dc8051.fw" +#define DEFAULT_FW_FABRIC_NAME "hfi1_fabric.fw" +#define DEFAULT_FW_SBUS_NAME "hfi1_sbus.fw" +#define DEFAULT_FW_PCIE_NAME "hfi1_pcie.fw" +#define DEFAULT_PLATFORM_CONFIG_NAME "hfi1_platform.dat" + +static uint fw_8051_load = 1; +static uint fw_fabric_serdes_load = 1; +static uint fw_pcie_serdes_load = 1; +static uint fw_sbus_load = 1; +static uint platform_config_load = 1; + +/* Firmware file names get set in hfi1_firmware_init() based on the above */ +static char *fw_8051_name; +static char *fw_fabric_serdes_name; +static char *fw_sbus_name; +static char *fw_pcie_serdes_name; +static char *platform_config_name; + +#define SBUS_MAX_POLL_COUNT 100 +#define SBUS_COUNTER(reg, name) \ + (((reg) >> ASIC_STS_SBUS_COUNTERS_##name##_CNT_SHIFT) & \ + ASIC_STS_SBUS_COUNTERS_##name##_CNT_MASK) + +/* + * Firmware security header. + */ +struct css_header { + u32 module_type; + u32 header_len; + u32 header_version; + u32 module_id; + u32 module_vendor; + u32 date; /* BCD yyyymmdd */ + u32 size; /* in DWORDs */ + u32 key_size; /* in DWORDs */ + u32 modulus_size; /* in DWORDs */ + u32 exponent_size; /* in DWORDs */ + u32 reserved[22]; +}; +/* expected field values */ +#define CSS_MODULE_TYPE 0x00000006 +#define CSS_HEADER_LEN 0x000000a1 +#define CSS_HEADER_VERSION 0x00010000 +#define CSS_MODULE_VENDOR 0x00008086 + +#define KEY_SIZE 256 +#define MU_SIZE 8 +#define EXPONENT_SIZE 4 + +/* the file itself */ +struct firmware_file { + struct css_header css_header; + u8 modulus[KEY_SIZE]; + u8 exponent[EXPONENT_SIZE]; + u8 signature[KEY_SIZE]; + u8 firmware[]; +}; + +struct augmented_firmware_file { + struct css_header css_header; + u8 modulus[KEY_SIZE]; + u8 exponent[EXPONENT_SIZE]; + u8 signature[KEY_SIZE]; + u8 r2[KEY_SIZE]; + u8 mu[MU_SIZE]; + u8 firmware[]; +}; + +/* augmented file size difference */ +#define AUGMENT_SIZE (sizeof(struct augmented_firmware_file) - \ + sizeof(struct firmware_file)) + +struct firmware_details { + /* Linux core piece */ + const struct firmware *fw; + + struct css_header *css_header; + u8 *firmware_ptr; /* pointer to binary data */ + u32 firmware_len; /* length in bytes */ + u8 *modulus; /* pointer to the modulus */ + u8 *exponent; /* pointer to the exponent */ + u8 *signature; /* pointer to the signature */ + u8 *r2; /* pointer to r2 */ + u8 *mu; /* pointer to mu */ + struct augmented_firmware_file dummy_header; +}; + +/* + * The mutex protects fw_state, fw_err, and all of the firmware_details + * variables. + */ +static DEFINE_MUTEX(fw_mutex); +enum fw_state { + FW_EMPTY, + FW_ACQUIRED, + FW_ERR +}; +static enum fw_state fw_state = FW_EMPTY; +static int fw_err; +static struct firmware_details fw_8051; +static struct firmware_details fw_fabric; +static struct firmware_details fw_pcie; +static struct firmware_details fw_sbus; +static const struct firmware *platform_config; + +/* flags for turn_off_spicos() */ +#define SPICO_SBUS 0x1 +#define SPICO_FABRIC 0x2 +#define ENABLE_SPICO_SMASK 0x1 + +/* security block commands */ +#define RSA_CMD_INIT 0x1 +#define RSA_CMD_START 0x2 + +/* security block status */ +#define RSA_STATUS_IDLE 0x0 +#define RSA_STATUS_ACTIVE 0x1 +#define RSA_STATUS_DONE 0x2 +#define RSA_STATUS_FAILED 0x3 + +/* RSA engine timeout, in ms */ +#define RSA_ENGINE_TIMEOUT 100 /* ms */ + +/* hardware mutex timeout, in ms */ +#define HM_TIMEOUT 4000 /* 4 s */ + +/* 8051 memory access timeout, in us */ +#define DC8051_ACCESS_TIMEOUT 100 /* us */ + +/* the number of fabric SerDes on the SBus */ +#define NUM_FABRIC_SERDES 4 + +/* SBus fabric SerDes addresses, one set per HFI */ +static const u8 fabric_serdes_addrs[2][NUM_FABRIC_SERDES] = { + { 0x01, 0x02, 0x03, 0x04 }, + { 0x28, 0x29, 0x2a, 0x2b } +}; + +/* SBus PCIe SerDes addresses, one set per HFI */ +static const u8 pcie_serdes_addrs[2][NUM_PCIE_SERDES] = { + { 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, + 0x18, 0x1a, 0x1c, 0x1e, 0x20, 0x22, 0x24, 0x26 }, + { 0x2f, 0x31, 0x33, 0x35, 0x37, 0x39, 0x3b, 0x3d, + 0x3f, 0x41, 0x43, 0x45, 0x47, 0x49, 0x4b, 0x4d } +}; + +/* SBus PCIe PCS addresses, one set per HFI */ +const u8 pcie_pcs_addrs[2][NUM_PCIE_SERDES] = { + { 0x09, 0x0b, 0x0d, 0x0f, 0x11, 0x13, 0x15, 0x17, + 0x19, 0x1b, 0x1d, 0x1f, 0x21, 0x23, 0x25, 0x27 }, + { 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e, + 0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e } +}; + +/* SBus fabric SerDes broadcast addresses, one per HFI */ +static const u8 fabric_serdes_broadcast[2] = { 0xe4, 0xe5 }; +static const u8 all_fabric_serdes_broadcast = 0xe1; + +/* SBus PCIe SerDes broadcast addresses, one per HFI */ +const u8 pcie_serdes_broadcast[2] = { 0xe2, 0xe3 }; +static const u8 all_pcie_serdes_broadcast = 0xe0; + +/* forwards */ +static void dispose_one_firmware(struct firmware_details *fdet); + +/* + * Read a single 64-bit value from 8051 data memory. + * + * Expects: + * o caller to have already set up data read, no auto increment + * o caller to turn off read enable when finished + * + * The address argument is a byte offset. Bits 0:2 in the address are + * ignored - i.e. the hardware will always do aligned 8-byte reads as if + * the lower bits are zero. + * + * Return 0 on success, -ENXIO on a read error (timeout). + */ +static int __read_8051_data(struct hfi1_devdata *dd, u32 addr, u64 *result) +{ + u64 reg; + int count; + + /* start the read at the given address */ + reg = ((addr & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK) + << DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT) + | DC_DC8051_CFG_RAM_ACCESS_CTRL_READ_ENA_SMASK; + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg); + + /* wait until ACCESS_COMPLETED is set */ + count = 0; + while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS) + & DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK) + == 0) { + count++; + if (count > DC8051_ACCESS_TIMEOUT) { + dd_dev_err(dd, "timeout reading 8051 data\n"); + return -ENXIO; + } + ndelay(10); + } + + /* gather the data */ + *result = read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_RD_DATA); + + return 0; +} + +/* + * Read 8051 data starting at addr, for len bytes. Will read in 8-byte chunks. + * Return 0 on success, -errno on error. + */ +int read_8051_data(struct hfi1_devdata *dd, u32 addr, u32 len, u64 *result) +{ + unsigned long flags; + u32 done; + int ret = 0; + + spin_lock_irqsave(&dd->dc8051_memlock, flags); + + /* data read set-up, no auto-increment */ + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0); + + for (done = 0; done < len; addr += 8, done += 8, result++) { + ret = __read_8051_data(dd, addr, result); + if (ret) + break; + } + + /* turn off read enable */ + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0); + + spin_unlock_irqrestore(&dd->dc8051_memlock, flags); + + return ret; +} + +/* + * Write data or code to the 8051 code or data RAM. + */ +static int write_8051(struct hfi1_devdata *dd, int code, u32 start, + const u8 *data, u32 len) +{ + u64 reg; + u32 offset; + int aligned, count; + + /* check alignment */ + aligned = ((unsigned long)data & 0x7) == 0; + + /* write set-up */ + reg = (code ? DC_DC8051_CFG_RAM_ACCESS_SETUP_RAM_SEL_SMASK : 0ull) + | DC_DC8051_CFG_RAM_ACCESS_SETUP_AUTO_INCR_ADDR_SMASK; + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, reg); + + reg = ((start & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK) + << DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT) + | DC_DC8051_CFG_RAM_ACCESS_CTRL_WRITE_ENA_SMASK; + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg); + + /* write */ + for (offset = 0; offset < len; offset += 8) { + int bytes = len - offset; + + if (bytes < 8) { + reg = 0; + memcpy(®, &data[offset], bytes); + } else if (aligned) { + reg = *(u64 *)&data[offset]; + } else { + memcpy(®, &data[offset], 8); + } + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_WR_DATA, reg); + + /* wait until ACCESS_COMPLETED is set */ + count = 0; + while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS) + & DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK) + == 0) { + count++; + if (count > DC8051_ACCESS_TIMEOUT) { + dd_dev_err(dd, "timeout writing 8051 data\n"); + return -ENXIO; + } + udelay(1); + } + } + + /* turn off write access, auto increment (also sets to data access) */ + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0); + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0); + + return 0; +} + +/* return 0 if values match, non-zero and complain otherwise */ +static int invalid_header(struct hfi1_devdata *dd, const char *what, + u32 actual, u32 expected) +{ + if (actual == expected) + return 0; + + dd_dev_err(dd, + "invalid firmware header field %s: expected 0x%x, actual 0x%x\n", + what, expected, actual); + return 1; +} + +/* + * Verify that the static fields in the CSS header match. + */ +static int verify_css_header(struct hfi1_devdata *dd, struct css_header *css) +{ + /* verify CSS header fields (most sizes are in DW, so add /4) */ + if (invalid_header(dd, "module_type", css->module_type, CSS_MODULE_TYPE) + || invalid_header(dd, "header_len", css->header_len, + (sizeof(struct firmware_file)/4)) + || invalid_header(dd, "header_version", + css->header_version, CSS_HEADER_VERSION) + || invalid_header(dd, "module_vendor", + css->module_vendor, CSS_MODULE_VENDOR) + || invalid_header(dd, "key_size", + css->key_size, KEY_SIZE/4) + || invalid_header(dd, "modulus_size", + css->modulus_size, KEY_SIZE/4) + || invalid_header(dd, "exponent_size", + css->exponent_size, EXPONENT_SIZE/4)) { + return -EINVAL; + } + return 0; +} + +/* + * Make sure there are at least some bytes after the prefix. + */ +static int payload_check(struct hfi1_devdata *dd, const char *name, + long file_size, long prefix_size) +{ + /* make sure we have some payload */ + if (prefix_size >= file_size) { + dd_dev_err(dd, + "firmware \"%s\", size %ld, must be larger than %ld bytes\n", + name, file_size, prefix_size); + return -EINVAL; + } + + return 0; +} + +/* + * Request the firmware from the system. Extract the pieces and fill in + * fdet. If successful, the caller will need to call dispose_one_firmware(). + * Returns 0 on success, -ERRNO on error. + */ +static int obtain_one_firmware(struct hfi1_devdata *dd, const char *name, + struct firmware_details *fdet) +{ + struct css_header *css; + int ret; + + memset(fdet, 0, sizeof(*fdet)); + + ret = request_firmware(&fdet->fw, name, &dd->pcidev->dev); + if (ret) { + dd_dev_err(dd, "cannot load firmware \"%s\", err %d\n", + name, ret); + return ret; + } + + /* verify the firmware */ + if (fdet->fw->size < sizeof(struct css_header)) { + dd_dev_err(dd, "firmware \"%s\" is too small\n", name); + ret = -EINVAL; + goto done; + } + css = (struct css_header *)fdet->fw->data; + + hfi1_cdbg(FIRMWARE, "Firmware %s details:", name); + hfi1_cdbg(FIRMWARE, "file size: 0x%lx bytes", fdet->fw->size); + hfi1_cdbg(FIRMWARE, "CSS structure:"); + hfi1_cdbg(FIRMWARE, " module_type 0x%x", css->module_type); + hfi1_cdbg(FIRMWARE, " header_len 0x%03x (0x%03x bytes)", + css->header_len, 4 * css->header_len); + hfi1_cdbg(FIRMWARE, " header_version 0x%x", css->header_version); + hfi1_cdbg(FIRMWARE, " module_id 0x%x", css->module_id); + hfi1_cdbg(FIRMWARE, " module_vendor 0x%x", css->module_vendor); + hfi1_cdbg(FIRMWARE, " date 0x%x", css->date); + hfi1_cdbg(FIRMWARE, " size 0x%03x (0x%03x bytes)", + css->size, 4 * css->size); + hfi1_cdbg(FIRMWARE, " key_size 0x%03x (0x%03x bytes)", + css->key_size, 4 * css->key_size); + hfi1_cdbg(FIRMWARE, " modulus_size 0x%03x (0x%03x bytes)", + css->modulus_size, 4 * css->modulus_size); + hfi1_cdbg(FIRMWARE, " exponent_size 0x%03x (0x%03x bytes)", + css->exponent_size, 4 * css->exponent_size); + hfi1_cdbg(FIRMWARE, "firmware size: 0x%lx bytes", + fdet->fw->size - sizeof(struct firmware_file)); + + /* + * If the file does not have a valid CSS header, fail. + * Otherwise, check the CSS size field for an expected size. + * The augmented file has r2 and mu inserted after the header + * was generated, so there will be a known difference between + * the CSS header size and the actual file size. Use this + * difference to identify an augmented file. + * + * Note: css->size is in DWORDs, multiply by 4 to get bytes. + */ + ret = verify_css_header(dd, css); + if (ret) { + dd_dev_info(dd, "Invalid CSS header for \"%s\"\n", name); + } else if ((css->size*4) == fdet->fw->size) { + /* non-augmented firmware file */ + struct firmware_file *ff = (struct firmware_file *) + fdet->fw->data; + + /* make sure there are bytes in the payload */ + ret = payload_check(dd, name, fdet->fw->size, + sizeof(struct firmware_file)); + if (ret == 0) { + fdet->css_header = css; + fdet->modulus = ff->modulus; + fdet->exponent = ff->exponent; + fdet->signature = ff->signature; + fdet->r2 = fdet->dummy_header.r2; /* use dummy space */ + fdet->mu = fdet->dummy_header.mu; /* use dummy space */ + fdet->firmware_ptr = ff->firmware; + fdet->firmware_len = fdet->fw->size - + sizeof(struct firmware_file); + /* + * Header does not include r2 and mu - generate here. + * For now, fail. + */ + dd_dev_err(dd, "driver is unable to validate firmware without r2 and mu (not in firmware file)\n"); + ret = -EINVAL; + } + } else if ((css->size*4) + AUGMENT_SIZE == fdet->fw->size) { + /* augmented firmware file */ + struct augmented_firmware_file *aff = + (struct augmented_firmware_file *)fdet->fw->data; + + /* make sure there are bytes in the payload */ + ret = payload_check(dd, name, fdet->fw->size, + sizeof(struct augmented_firmware_file)); + if (ret == 0) { + fdet->css_header = css; + fdet->modulus = aff->modulus; + fdet->exponent = aff->exponent; + fdet->signature = aff->signature; + fdet->r2 = aff->r2; + fdet->mu = aff->mu; + fdet->firmware_ptr = aff->firmware; + fdet->firmware_len = fdet->fw->size - + sizeof(struct augmented_firmware_file); + } + } else { + /* css->size check failed */ + dd_dev_err(dd, + "invalid firmware header field size: expected 0x%lx or 0x%lx, actual 0x%x\n", + fdet->fw->size/4, (fdet->fw->size - AUGMENT_SIZE)/4, + css->size); + + ret = -EINVAL; + } + +done: + /* if returning an error, clean up after ourselves */ + if (ret) + dispose_one_firmware(fdet); + return ret; +} + +static void dispose_one_firmware(struct firmware_details *fdet) +{ + release_firmware(fdet->fw); + fdet->fw = NULL; +} + +/* + * Called by all HFIs when loading their firmware - i.e. device probe time. + * The first one will do the actual firmware load. Use a mutex to resolve + * any possible race condition. + * + * The call to this routine cannot be moved to driver load because the kernel + * call request_firmware() requires a device which is only available after + * the first device probe. + */ +static int obtain_firmware(struct hfi1_devdata *dd) +{ + int err = 0; + + mutex_lock(&fw_mutex); + if (fw_state == FW_ACQUIRED) { + goto done; /* already acquired */ + } else if (fw_state == FW_ERR) { + err = fw_err; + goto done; /* already tried and failed */ + } + + if (fw_8051_load) { + err = obtain_one_firmware(dd, fw_8051_name, &fw_8051); + if (err) + goto done; + } + + if (fw_fabric_serdes_load) { + err = obtain_one_firmware(dd, fw_fabric_serdes_name, + &fw_fabric); + if (err) + goto done; + } + + if (fw_sbus_load) { + err = obtain_one_firmware(dd, fw_sbus_name, &fw_sbus); + if (err) + goto done; + } + + if (fw_pcie_serdes_load) { + err = obtain_one_firmware(dd, fw_pcie_serdes_name, &fw_pcie); + if (err) + goto done; + } + + if (platform_config_load) { + platform_config = NULL; + err = request_firmware(&platform_config, platform_config_name, + &dd->pcidev->dev); + if (err) { + err = 0; + platform_config = NULL; + } + } + + /* success */ + fw_state = FW_ACQUIRED; + +done: + if (err) { + fw_err = err; + fw_state = FW_ERR; + } + mutex_unlock(&fw_mutex); + + return err; +} + +/* + * Called when the driver unloads. The timing is asymmetric with its + * counterpart, obtain_firmware(). If called at device remove time, + * then it is conceivable that another device could probe while the + * firmware is being disposed. The mutexes can be moved to do that + * safely, but then the firmware would be requested from the OS multiple + * times. + * + * No mutex is needed as the driver is unloading and there cannot be any + * other callers. + */ +void dispose_firmware(void) +{ + dispose_one_firmware(&fw_8051); + dispose_one_firmware(&fw_fabric); + dispose_one_firmware(&fw_pcie); + dispose_one_firmware(&fw_sbus); + + release_firmware(platform_config); + platform_config = NULL; + + /* retain the error state, otherwise revert to empty */ + if (fw_state != FW_ERR) + fw_state = FW_EMPTY; +} + +/* + * Write a block of data to a given array CSR. All calls will be in + * multiples of 8 bytes. + */ +static void write_rsa_data(struct hfi1_devdata *dd, int what, + const u8 *data, int nbytes) +{ + int qw_size = nbytes/8; + int i; + + if (((unsigned long)data & 0x7) == 0) { + /* aligned */ + u64 *ptr = (u64 *)data; + + for (i = 0; i < qw_size; i++, ptr++) + write_csr(dd, what + (8*i), *ptr); + } else { + /* not aligned */ + for (i = 0; i < qw_size; i++, data += 8) { + u64 value; + + memcpy(&value, data, 8); + write_csr(dd, what + (8*i), value); + } + } +} + +/* + * Write a block of data to a given CSR as a stream of writes. All calls will + * be in multiples of 8 bytes. + */ +static void write_streamed_rsa_data(struct hfi1_devdata *dd, int what, + const u8 *data, int nbytes) +{ + u64 *ptr = (u64 *)data; + int qw_size = nbytes/8; + + for (; qw_size > 0; qw_size--, ptr++) + write_csr(dd, what, *ptr); +} + +/* + * Download the signature and start the RSA mechanism. Wait for + * RSA_ENGINE_TIMEOUT before giving up. + */ +static int run_rsa(struct hfi1_devdata *dd, const char *who, + const u8 *signature) +{ + unsigned long timeout; + u64 reg; + u32 status; + int ret = 0; + + /* write the signature */ + write_rsa_data(dd, MISC_CFG_RSA_SIGNATURE, signature, KEY_SIZE); + + /* initialize RSA */ + write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_INIT); + + /* + * Make sure the engine is idle and insert a delay between the two + * writes to MISC_CFG_RSA_CMD. + */ + status = (read_csr(dd, MISC_CFG_FW_CTRL) + & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK) + >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT; + if (status != RSA_STATUS_IDLE) { + dd_dev_err(dd, "%s security engine not idle - giving up\n", + who); + return -EBUSY; + } + + /* start RSA */ + write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_START); + + /* + * Look for the result. + * + * The RSA engine is hooked up to two MISC errors. The driver + * masks these errors as they do not respond to the standard + * error "clear down" mechanism. Look for these errors here and + * clear them when possible. This routine will exit with the + * errors of the current run still set. + * + * MISC_FW_AUTH_FAILED_ERR + * Firmware authorization failed. This can be cleared by + * re-initializing the RSA engine, then clearing the status bit. + * Do not re-init the RSA angine immediately after a successful + * run - this will reset the current authorization. + * + * MISC_KEY_MISMATCH_ERR + * Key does not match. The only way to clear this is to load + * a matching key then clear the status bit. If this error + * is raised, it will persist outside of this routine until a + * matching key is loaded. + */ + timeout = msecs_to_jiffies(RSA_ENGINE_TIMEOUT) + jiffies; + while (1) { + status = (read_csr(dd, MISC_CFG_FW_CTRL) + & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK) + >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT; + + if (status == RSA_STATUS_IDLE) { + /* should not happen */ + dd_dev_err(dd, "%s firmware security bad idle state\n", + who); + ret = -EINVAL; + break; + } else if (status == RSA_STATUS_DONE) { + /* finished successfully */ + break; + } else if (status == RSA_STATUS_FAILED) { + /* finished unsuccessfully */ + ret = -EINVAL; + break; + } + /* else still active */ + + if (time_after(jiffies, timeout)) { + /* + * Timed out while active. We can't reset the engine + * if it is stuck active, but run through the + * error code to see what error bits are set. + */ + dd_dev_err(dd, "%s firmware security time out\n", who); + ret = -ETIMEDOUT; + break; + } + + msleep(20); + } + + /* + * Arrive here on success or failure. Clear all RSA engine + * errors. All current errors will stick - the RSA logic is keeping + * error high. All previous errors will clear - the RSA logic + * is not keeping the error high. + */ + write_csr(dd, MISC_ERR_CLEAR, + MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK + | MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK); + /* + * All that is left are the current errors. Print failure details, + * if any. + */ + reg = read_csr(dd, MISC_ERR_STATUS); + if (ret) { + if (reg & MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK) + dd_dev_err(dd, "%s firmware authorization failed\n", + who); + if (reg & MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK) + dd_dev_err(dd, "%s firmware key mismatch\n", who); + } + + return ret; +} + +static void load_security_variables(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + /* Security variables a. Write the modulus */ + write_rsa_data(dd, MISC_CFG_RSA_MODULUS, fdet->modulus, KEY_SIZE); + /* Security variables b. Write the r2 */ + write_rsa_data(dd, MISC_CFG_RSA_R2, fdet->r2, KEY_SIZE); + /* Security variables c. Write the mu */ + write_rsa_data(dd, MISC_CFG_RSA_MU, fdet->mu, MU_SIZE); + /* Security variables d. Write the header */ + write_streamed_rsa_data(dd, MISC_CFG_SHA_PRELOAD, + (u8 *)fdet->css_header, sizeof(struct css_header)); +} + +/* return the 8051 firmware state */ +static inline u32 get_firmware_state(struct hfi1_devdata *dd) +{ + u64 reg = read_csr(dd, DC_DC8051_STS_CUR_STATE); + + return (reg >> DC_DC8051_STS_CUR_STATE_FIRMWARE_SHIFT) + & DC_DC8051_STS_CUR_STATE_FIRMWARE_MASK; +} + +/* + * Wait until the firmware is up and ready to take host requests. + * Return 0 on success, -ETIMEDOUT on timeout. + */ +int wait_fm_ready(struct hfi1_devdata *dd, u32 mstimeout) +{ + unsigned long timeout; + + /* in the simulator, the fake 8051 is always ready */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) + return 0; + + timeout = msecs_to_jiffies(mstimeout) + jiffies; + while (1) { + if (get_firmware_state(dd) == 0xa0) /* ready */ + return 0; + if (time_after(jiffies, timeout)) /* timed out */ + return -ETIMEDOUT; + usleep_range(1950, 2050); /* sleep 2ms-ish */ + } +} + +/* + * Load the 8051 firmware. + */ +static int load_8051_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + u64 reg; + int ret; + u8 ver_a, ver_b; + + /* + * DC Reset sequence + * Load DC 8051 firmware + */ + /* + * DC reset step 1: Reset DC8051 + */ + reg = DC_DC8051_CFG_RST_M8051W_SMASK + | DC_DC8051_CFG_RST_CRAM_SMASK + | DC_DC8051_CFG_RST_DRAM_SMASK + | DC_DC8051_CFG_RST_IRAM_SMASK + | DC_DC8051_CFG_RST_SFR_SMASK; + write_csr(dd, DC_DC8051_CFG_RST, reg); + + /* + * DC reset step 2 (optional): Load 8051 data memory with link + * configuration + */ + + /* + * DC reset step 3: Load DC8051 firmware + */ + /* release all but the core reset */ + reg = DC_DC8051_CFG_RST_M8051W_SMASK; + write_csr(dd, DC_DC8051_CFG_RST, reg); + + /* Firmware load step 1 */ + load_security_variables(dd, fdet); + + /* + * Firmware load step 2. Clear MISC_CFG_FW_CTRL.FW_8051_LOADED + */ + write_csr(dd, MISC_CFG_FW_CTRL, 0); + + /* Firmware load steps 3-5 */ + ret = write_8051(dd, 1/*code*/, 0, fdet->firmware_ptr, + fdet->firmware_len); + if (ret) + return ret; + + /* + * DC reset step 4. Host starts the DC8051 firmware + */ + /* + * Firmware load step 6. Set MISC_CFG_FW_CTRL.FW_8051_LOADED + */ + write_csr(dd, MISC_CFG_FW_CTRL, MISC_CFG_FW_CTRL_FW_8051_LOADED_SMASK); + + /* Firmware load steps 7-10 */ + ret = run_rsa(dd, "8051", fdet->signature); + if (ret) + return ret; + + /* clear all reset bits, releasing the 8051 */ + write_csr(dd, DC_DC8051_CFG_RST, 0ull); + + /* + * DC reset step 5. Wait for firmware to be ready to accept host + * requests. + */ + ret = wait_fm_ready(dd, TIMEOUT_8051_START); + if (ret) { /* timed out */ + dd_dev_err(dd, "8051 start timeout, current state 0x%x\n", + get_firmware_state(dd)); + return -ETIMEDOUT; + } + + read_misc_status(dd, &ver_a, &ver_b); + dd_dev_info(dd, "8051 firmware version %d.%d\n", + (int)ver_b, (int)ver_a); + dd->dc8051_ver = dc8051_ver(ver_b, ver_a); + + return 0; +} + +/* SBus Master broadcast address */ +#define SBUS_MASTER_BROADCAST 0xfd + +/* + * Write the SBus request register + * + * No need for masking - the arguments are sized exactly. + */ +void sbus_request(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in) +{ + write_csr(dd, ASIC_CFG_SBUS_REQUEST, + ((u64)data_in << ASIC_CFG_SBUS_REQUEST_DATA_IN_SHIFT) + | ((u64)command << ASIC_CFG_SBUS_REQUEST_COMMAND_SHIFT) + | ((u64)data_addr << ASIC_CFG_SBUS_REQUEST_DATA_ADDR_SHIFT) + | ((u64)receiver_addr + << ASIC_CFG_SBUS_REQUEST_RECEIVER_ADDR_SHIFT)); +} + +/* + * Turn off the SBus and fabric serdes spicos. + * + * + Must be called with Sbus fast mode turned on. + * + Must be called after fabric serdes broadcast is set up. + * + Must be called before the 8051 is loaded - assumes 8051 is not loaded + * when using MISC_CFG_FW_CTRL. + */ +static void turn_off_spicos(struct hfi1_devdata *dd, int flags) +{ + /* only needed on A0 */ + if (!is_a0(dd)) + return; + + dd_dev_info(dd, "Turning off spicos:%s%s\n", + flags & SPICO_SBUS ? " SBus" : "", + flags & SPICO_FABRIC ? " fabric" : ""); + + write_csr(dd, MISC_CFG_FW_CTRL, ENABLE_SPICO_SMASK); + /* disable SBus spico */ + if (flags & SPICO_SBUS) + sbus_request(dd, SBUS_MASTER_BROADCAST, 0x01, + WRITE_SBUS_RECEIVER, 0x00000040); + + /* disable the fabric serdes spicos */ + if (flags & SPICO_FABRIC) + sbus_request(dd, fabric_serdes_broadcast[dd->hfi1_id], + 0x07, WRITE_SBUS_RECEIVER, 0x00000000); + write_csr(dd, MISC_CFG_FW_CTRL, 0); +} + +/* + * Reset all of the fabric serdes for our HFI. + */ +void fabric_serdes_reset(struct hfi1_devdata *dd) +{ + u8 ra; + + if (dd->icode != ICODE_RTL_SILICON) /* only for RTL */ + return; + + ra = fabric_serdes_broadcast[dd->hfi1_id]; + + acquire_hw_mutex(dd); + set_sbus_fast_mode(dd); + /* place SerDes in reset and disable SPICO */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011); + /* wait 100 refclk cycles @ 156.25MHz => 640ns */ + udelay(1); + /* remove SerDes reset */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010); + /* turn SPICO enable on */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002); + clear_sbus_fast_mode(dd); + release_hw_mutex(dd); +} + +/* Access to the SBus in this routine should probably be serialized */ +int sbus_request_slow(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in) +{ + u64 reg, count = 0; + + sbus_request(dd, receiver_addr, data_addr, command, data_in); + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, + ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK); + /* Wait for both DONE and RCV_DATA_VALID to go high */ + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + while (!((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) && + (reg & ASIC_STS_SBUS_RESULT_RCV_DATA_VALID_SMASK))) { + if (count++ >= SBUS_MAX_POLL_COUNT) { + u64 counts = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + /* + * If the loop has timed out, we are OK if DONE bit + * is set and RCV_DATA_VALID and EXECUTE counters + * are the same. If not, we cannot proceed. + */ + if ((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) && + (SBUS_COUNTER(counts, RCV_DATA_VALID) == + SBUS_COUNTER(counts, EXECUTE))) + break; + return -ETIMEDOUT; + } + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + } + count = 0; + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0); + /* Wait for DONE to clear after EXECUTE is cleared */ + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + while (reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) { + if (count++ >= SBUS_MAX_POLL_COUNT) + return -ETIME; + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + } + return 0; +} + +static int load_fabric_serdes_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i, err; + const u8 ra = fabric_serdes_broadcast[dd->hfi1_id]; /* receiver addr */ + + dd_dev_info(dd, "Downloading fabric firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: place SerDes in reset and disable SPICO */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011); + /* wait 100 refclk cycles @ 156.25MHz => 640ns */ + udelay(1); + /* step 3: remove SerDes reset */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010); + /* step 4: assert IMEM override */ + sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x40000000); + /* step 5: download SerDes machine code */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x0a, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 6: IMEM override off */ + sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x00000000); + /* step 7: turn ECC on */ + sbus_request(dd, ra, 0x0b, WRITE_SBUS_RECEIVER, 0x000c0000); + + /* steps 8-11: run the RSA engine */ + err = run_rsa(dd, "fabric serdes", fdet->signature); + if (err) + return err; + + /* step 12: turn SPICO enable on */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002); + /* step 13: enable core hardware interrupts */ + sbus_request(dd, ra, 0x08, WRITE_SBUS_RECEIVER, 0x00000000); + + return 0; +} + +static int load_sbus_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i, err; + const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */ + + dd_dev_info(dd, "Downloading SBus firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: place SPICO into reset and enable off */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x000000c0); + /* step 3: remove reset, enable off, IMEM_CNTRL_EN on */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000240); + /* step 4: set starting IMEM address for burst download */ + sbus_request(dd, ra, 0x03, WRITE_SBUS_RECEIVER, 0x80000000); + /* step 5: download the SBus Master machine code */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x14, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 6: set IMEM_CNTL_EN off */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000040); + /* step 7: turn ECC on */ + sbus_request(dd, ra, 0x16, WRITE_SBUS_RECEIVER, 0x000c0000); + + /* steps 8-11: run the RSA engine */ + err = run_rsa(dd, "SBus", fdet->signature); + if (err) + return err; + + /* step 12: set SPICO_ENABLE on */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140); + + return 0; +} + +static int load_pcie_serdes_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i; + const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */ + + dd_dev_info(dd, "Downloading PCIe firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: assert single step (halts the SBus Master spico) */ + sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000001); + /* step 3: enable XDMEM access */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000d40); + /* step 4: load firmware into SBus Master XDMEM */ + /* NOTE: the dmem address, write_en, and wdata are all pre-packed, + we only need to pick up the bytes and write them */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x04, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 5: disable XDMEM access */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140); + /* step 6: allow SBus Spico to run */ + sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000000); + + /* steps 7-11: run RSA, if it succeeds, firmware is available to + be swapped */ + return run_rsa(dd, "PCIe serdes", fdet->signature); +} + +/* + * Set the given broadcast values on the given list of devices. + */ +static void set_serdes_broadcast(struct hfi1_devdata *dd, u8 bg1, u8 bg2, + const u8 *addrs, int count) +{ + while (--count >= 0) { + /* + * Set BROADCAST_GROUP_1 and BROADCAST_GROUP_2, leave + * defaults for everything else. Do not read-modify-write, + * per instruction from the manufacturer. + * + * Register 0xfd: + * bits what + * ----- --------------------------------- + * 0 IGNORE_BROADCAST (default 0) + * 11:4 BROADCAST_GROUP_1 (default 0xff) + * 23:16 BROADCAST_GROUP_2 (default 0xff) + */ + sbus_request(dd, addrs[count], 0xfd, WRITE_SBUS_RECEIVER, + (u32)bg1 << 4 | (u32)bg2 << 16); + } +} + +int acquire_hw_mutex(struct hfi1_devdata *dd) +{ + unsigned long timeout; + int try = 0; + u8 mask = 1 << dd->hfi1_id; + u8 user; + +retry: + timeout = msecs_to_jiffies(HM_TIMEOUT) + jiffies; + while (1) { + write_csr(dd, ASIC_CFG_MUTEX, mask); + user = (u8)read_csr(dd, ASIC_CFG_MUTEX); + if (user == mask) + return 0; /* success */ + if (time_after(jiffies, timeout)) + break; /* timed out */ + msleep(20); + } + + /* timed out */ + dd_dev_err(dd, + "Unable to acquire hardware mutex, mutex mask %u, my mask %u (%s)\n", + (u32)user, (u32)mask, (try == 0) ? "retrying" : "giving up"); + + if (try == 0) { + /* break mutex and retry */ + write_csr(dd, ASIC_CFG_MUTEX, 0); + try++; + goto retry; + } + + return -EBUSY; +} + +void release_hw_mutex(struct hfi1_devdata *dd) +{ + write_csr(dd, ASIC_CFG_MUTEX, 0); +} + +void set_sbus_fast_mode(struct hfi1_devdata *dd) +{ + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, + ASIC_CFG_SBUS_EXECUTE_FAST_MODE_SMASK); +} + +void clear_sbus_fast_mode(struct hfi1_devdata *dd) +{ + u64 reg, count = 0; + + reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + while (SBUS_COUNTER(reg, EXECUTE) != + SBUS_COUNTER(reg, RCV_DATA_VALID)) { + if (count++ >= SBUS_MAX_POLL_COUNT) + break; + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + } + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0); +} + +int load_firmware(struct hfi1_devdata *dd) +{ + int ret; + + if (fw_sbus_load || fw_fabric_serdes_load) { + ret = acquire_hw_mutex(dd); + if (ret) + return ret; + + set_sbus_fast_mode(dd); + + /* + * The SBus contains part of the fabric firmware and so must + * also be downloaded. + */ + if (fw_sbus_load) { + turn_off_spicos(dd, SPICO_SBUS); + ret = load_sbus_firmware(dd, &fw_sbus); + if (ret) + goto clear; + } + + if (fw_fabric_serdes_load) { + set_serdes_broadcast(dd, all_fabric_serdes_broadcast, + fabric_serdes_broadcast[dd->hfi1_id], + fabric_serdes_addrs[dd->hfi1_id], + NUM_FABRIC_SERDES); + turn_off_spicos(dd, SPICO_FABRIC); + ret = load_fabric_serdes_firmware(dd, &fw_fabric); + } + +clear: + clear_sbus_fast_mode(dd); + release_hw_mutex(dd); + if (ret) + return ret; + } + + if (fw_8051_load) { + ret = load_8051_firmware(dd, &fw_8051); + if (ret) + return ret; + } + + return 0; +} + +int hfi1_firmware_init(struct hfi1_devdata *dd) +{ + /* only RTL can use these */ + if (dd->icode != ICODE_RTL_SILICON) { + fw_fabric_serdes_load = 0; + fw_pcie_serdes_load = 0; + fw_sbus_load = 0; + } + + /* no 8051 or QSFP on simulator */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + fw_8051_load = 0; + platform_config_load = 0; + } + + if (!fw_8051_name) { + if (dd->icode == ICODE_RTL_SILICON) + fw_8051_name = DEFAULT_FW_8051_NAME_ASIC; + else + fw_8051_name = DEFAULT_FW_8051_NAME_FPGA; + } + if (!fw_fabric_serdes_name) + fw_fabric_serdes_name = DEFAULT_FW_FABRIC_NAME; + if (!fw_sbus_name) + fw_sbus_name = DEFAULT_FW_SBUS_NAME; + if (!fw_pcie_serdes_name) + fw_pcie_serdes_name = DEFAULT_FW_PCIE_NAME; + if (!platform_config_name) + platform_config_name = DEFAULT_PLATFORM_CONFIG_NAME; + + return obtain_firmware(dd); +} + +int parse_platform_config(struct hfi1_devdata *dd) +{ + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + u32 *ptr = NULL; + u32 header1 = 0, header2 = 0, magic_num = 0, crc = 0; + u32 record_idx = 0, table_type = 0, table_length_dwords = 0; + + if (platform_config == NULL) { + dd_dev_info(dd, "%s: Missing config file\n", __func__); + goto bail; + } + ptr = (u32 *)platform_config->data; + + magic_num = *ptr; + ptr++; + if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) { + dd_dev_info(dd, "%s: Bad config file\n", __func__); + goto bail; + } + + while (ptr < (u32 *)(platform_config->data + platform_config->size)) { + header1 = *ptr; + header2 = *(ptr + 1); + if (header1 != ~header2) { + dd_dev_info(dd, "%s: Failed validation at offset %ld\n", + __func__, (ptr - (u32 *)platform_config->data)); + goto bail; + } + + record_idx = *ptr & + ((1 << PLATFORM_CONFIG_HEADER_RECORD_IDX_LEN_BITS) - 1); + + table_length_dwords = (*ptr >> + PLATFORM_CONFIG_HEADER_TABLE_LENGTH_SHIFT) & + ((1 << PLATFORM_CONFIG_HEADER_TABLE_LENGTH_LEN_BITS) - 1); + + table_type = (*ptr >> PLATFORM_CONFIG_HEADER_TABLE_TYPE_SHIFT) & + ((1 << PLATFORM_CONFIG_HEADER_TABLE_TYPE_LEN_BITS) - 1); + + /* Done with this set of headers */ + ptr += 2; + + if (record_idx) { + /* data table */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + pcfgcache->config_tables[table_type].num_table = + 1; + break; + case PLATFORM_CONFIG_PORT_TABLE: + pcfgcache->config_tables[table_type].num_table = + 2; + break; + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + pcfgcache->config_tables[table_type].num_table = + table_length_dwords; + break; + default: + dd_dev_info(dd, + "%s: Unknown data table %d, offset %ld\n", + __func__, table_type, + (ptr - (u32 *)platform_config->data)); + goto bail; /* We don't trust this file now */ + } + pcfgcache->config_tables[table_type].table = ptr; + } else { + /* metadata table */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + /* fall through */ + case PLATFORM_CONFIG_PORT_TABLE: + /* fall through */ + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + break; + default: + dd_dev_info(dd, + "%s: Unknown metadata table %d, offset %ld\n", + __func__, table_type, + (ptr - (u32 *)platform_config->data)); + goto bail; /* We don't trust this file now */ + } + pcfgcache->config_tables[table_type].table_metadata = + ptr; + } + + /* Calculate and check table crc */ + crc = crc32_le(~(u32)0, (unsigned char const *)ptr, + (table_length_dwords * 4)); + crc ^= ~(u32)0; + + /* Jump the table */ + ptr += table_length_dwords; + if (crc != *ptr) { + dd_dev_info(dd, "%s: Failed CRC check at offset %ld\n", + __func__, (ptr - (u32 *)platform_config->data)); + goto bail; + } + /* Jump the CRC DWORD */ + ptr++; + } + + pcfgcache->cache_valid = 1; + return 0; +bail: + memset(pcfgcache, 0, sizeof(struct platform_config_cache)); + return -EINVAL; +} + +static int get_platform_fw_field_metadata(struct hfi1_devdata *dd, int table, + int field, u32 *field_len_bits, u32 *field_start_bits) +{ + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + u32 *src_ptr = NULL; + + if (!pcfgcache->cache_valid) + return -EINVAL; + + switch (table) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + /* fall through */ + case PLATFORM_CONFIG_PORT_TABLE: + /* fall through */ + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + if (field && field < platform_config_table_limits[table]) + src_ptr = + pcfgcache->config_tables[table].table_metadata + field; + break; + default: + dd_dev_info(dd, "%s: Unknown table\n", __func__); + break; + } + + if (!src_ptr) + return -EINVAL; + + if (field_start_bits) + *field_start_bits = *src_ptr & + ((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1); + + if (field_len_bits) + *field_len_bits = (*src_ptr >> METADATA_TABLE_FIELD_LEN_SHIFT) + & ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1); + + return 0; +} + +/* This is the central interface to getting data out of the platform config + * file. It depends on parse_platform_config() having populated the + * platform_config_cache in hfi1_devdata, and checks the cache_valid member to + * validate the sanity of the cache. + * + * The non-obvious parameters: + * @table_index: Acts as a look up key into which instance of the tables the + * relevant field is fetched from. + * + * This applies to the data tables that have multiple instances. The port table + * is an exception to this rule as each HFI only has one port and thus the + * relevant table can be distinguished by hfi_id. + * + * @data: pointer to memory that will be populated with the field requested. + * @len: length of memory pointed by @data in bytes. + */ +int get_platform_config_field(struct hfi1_devdata *dd, + enum platform_config_table_type_encoding table_type, + int table_index, int field_index, u32 *data, u32 len) +{ + int ret = 0, wlen = 0, seek = 0; + u32 field_len_bits = 0, field_start_bits = 0, *src_ptr = NULL; + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + + if (data) + memset(data, 0, len); + else + return -EINVAL; + + ret = get_platform_fw_field_metadata(dd, table_type, field_index, + &field_len_bits, &field_start_bits); + if (ret) + return -EINVAL; + + /* Convert length to bits */ + len *= 8; + + /* Our metadata function checked cache_valid and field_index for us */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + src_ptr = pcfgcache->config_tables[table_type].table; + + if (field_index != SYSTEM_TABLE_QSFP_POWER_CLASS_MAX) { + if (len < field_len_bits) + return -EINVAL; + + seek = field_start_bits/8; + wlen = field_len_bits/8; + + src_ptr = (u32 *)((u8 *)src_ptr + seek); + + /* We expect the field to be byte aligned and whole byte + * lengths if we are here */ + memcpy(data, src_ptr, wlen); + return 0; + } + break; + case PLATFORM_CONFIG_PORT_TABLE: + /* Port table is 4 DWORDS in META_VERSION 0 */ + src_ptr = dd->hfi1_id ? + pcfgcache->config_tables[table_type].table + 4 : + pcfgcache->config_tables[table_type].table; + break; + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + src_ptr = pcfgcache->config_tables[table_type].table; + + if (table_index < + pcfgcache->config_tables[table_type].num_table) + src_ptr += table_index; + else + src_ptr = NULL; + break; + default: + dd_dev_info(dd, "%s: Unknown table\n", __func__); + break; + } + + if (!src_ptr || len < field_len_bits) + return -EINVAL; + + src_ptr += (field_start_bits/32); + *data = (*src_ptr >> (field_start_bits % 32)) & + ((1 << field_len_bits) - 1); + + return 0; +} + +/* + * Download the firmware needed for the Gen3 PCIe SerDes. An update + * to the SBus firmware is needed before updating the PCIe firmware. + * + * Note: caller must be holding the HW mutex. + */ +int load_pcie_firmware(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* both firmware loads below use the SBus */ + set_sbus_fast_mode(dd); + + if (fw_sbus_load) { + turn_off_spicos(dd, SPICO_SBUS); + ret = load_sbus_firmware(dd, &fw_sbus); + if (ret) + goto done; + } + + if (fw_pcie_serdes_load) { + dd_dev_info(dd, "Setting PCIe SerDes broadcast\n"); + set_serdes_broadcast(dd, all_pcie_serdes_broadcast, + pcie_serdes_broadcast[dd->hfi1_id], + pcie_serdes_addrs[dd->hfi1_id], + NUM_PCIE_SERDES); + ret = load_pcie_serdes_firmware(dd, &fw_pcie); + if (ret) + goto done; + } + +done: + clear_sbus_fast_mode(dd); + + return ret; +} + +/* + * Read the GUID from the hardware, store it in dd. + */ +void read_guid(struct hfi1_devdata *dd) +{ + dd->base_guid = read_csr(dd, DC_DC8051_CFG_LOCAL_GUID); + dd_dev_info(dd, "GUID %llx", + (unsigned long long)dd->base_guid); +} diff --git a/drivers/staging/rdma/hfi1/hfi.h b/drivers/staging/rdma/hfi1/hfi.h new file mode 100644 index 000000000000..8ca171bf3e36 --- /dev/null +++ b/drivers/staging/rdma/hfi1/hfi.h @@ -0,0 +1,1821 @@ +#ifndef _HFI1_KERNEL_H +#define _HFI1_KERNEL_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/scatterlist.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/fs.h> +#include <linux/completion.h> +#include <linux/kref.h> +#include <linux/sched.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/kthread.h> + +#include "chip_registers.h" +#include "common.h" +#include "verbs.h" +#include "pio.h" +#include "chip.h" +#include "mad.h" +#include "qsfp.h" +#include "platform_config.h" + +/* bumped 1 from s/w major version of TrueScale */ +#define HFI1_CHIP_VERS_MAJ 3U + +/* don't care about this except printing */ +#define HFI1_CHIP_VERS_MIN 0U + +/* The Organization Unique Identifier (Mfg code), and its position in GUID */ +#define HFI1_OUI 0x001175 +#define HFI1_OUI_LSB 40 + +#define DROP_PACKET_OFF 0 +#define DROP_PACKET_ON 1 + +extern unsigned long hfi1_cap_mask; +#define HFI1_CAP_KGET_MASK(mask, cap) ((mask) & HFI1_CAP_##cap) +#define HFI1_CAP_UGET_MASK(mask, cap) \ + (((mask) >> HFI1_CAP_USER_SHIFT) & HFI1_CAP_##cap) +#define HFI1_CAP_KGET(cap) (HFI1_CAP_KGET_MASK(hfi1_cap_mask, cap)) +#define HFI1_CAP_UGET(cap) (HFI1_CAP_UGET_MASK(hfi1_cap_mask, cap)) +#define HFI1_CAP_IS_KSET(cap) (!!HFI1_CAP_KGET(cap)) +#define HFI1_CAP_IS_USET(cap) (!!HFI1_CAP_UGET(cap)) +#define HFI1_MISC_GET() ((hfi1_cap_mask >> HFI1_CAP_MISC_SHIFT) & \ + HFI1_CAP_MISC_MASK) + +/* + * per driver stats, either not device nor port-specific, or + * summed over all of the devices and ports. + * They are described by name via ipathfs filesystem, so layout + * and number of elements can change without breaking compatibility. + * If members are added or deleted hfi1_statnames[] in debugfs.c must + * change to match. + */ +struct hfi1_ib_stats { + __u64 sps_ints; /* number of interrupts handled */ + __u64 sps_errints; /* number of error interrupts */ + __u64 sps_txerrs; /* tx-related packet errors */ + __u64 sps_rcverrs; /* non-crc rcv packet errors */ + __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */ + __u64 sps_nopiobufs; /* no pio bufs avail from kernel */ + __u64 sps_ctxts; /* number of contexts currently open */ + __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */ + __u64 sps_buffull; + __u64 sps_hdrfull; +}; + +extern struct hfi1_ib_stats hfi1_stats; +extern const struct pci_error_handlers hfi1_pci_err_handler; + +/* + * First-cut criterion for "device is active" is + * two thousand dwords combined Tx, Rx traffic per + * 5-second interval. SMA packets are 64 dwords, + * and occur "a few per second", presumably each way. + */ +#define HFI1_TRAFFIC_ACTIVE_THRESHOLD (2000) + +/* + * Below contains all data related to a single context (formerly called port). + */ + +#ifdef CONFIG_DEBUG_FS +struct hfi1_opcode_stats_perctx; +#endif + +/* + * struct ps_state keeps state associated with RX queue "prescanning" + * (prescanning for FECNs, and BECNs), if prescanning is in use. + */ +struct ps_state { + u32 ps_head; + int initialized; +}; + +struct ctxt_eager_bufs { + ssize_t size; /* total size of eager buffers */ + u32 count; /* size of buffers array */ + u32 numbufs; /* number of buffers allocated */ + u32 alloced; /* number of rcvarray entries used */ + u32 rcvtid_size; /* size of each eager rcv tid */ + u32 threshold; /* head update threshold */ + struct eager_buffer { + void *addr; + dma_addr_t phys; + ssize_t len; + } *buffers; + struct { + void *addr; + dma_addr_t phys; + } *rcvtids; +}; + +struct hfi1_ctxtdata { + /* shadow the ctxt's RcvCtrl register */ + u64 rcvctrl; + /* rcvhdrq base, needs mmap before useful */ + void *rcvhdrq; + /* kernel virtual address where hdrqtail is updated */ + volatile __le64 *rcvhdrtail_kvaddr; + /* + * Shared page for kernel to signal user processes that send buffers + * need disarming. The process should call HFI1_CMD_DISARM_BUFS + * or HFI1_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set. + */ + unsigned long *user_event_mask; + /* when waiting for rcv or pioavail */ + wait_queue_head_t wait; + /* rcvhdrq size (for freeing) */ + size_t rcvhdrq_size; + /* number of rcvhdrq entries */ + u16 rcvhdrq_cnt; + /* size of each of the rcvhdrq entries */ + u16 rcvhdrqentsize; + /* mmap of hdrq, must fit in 44 bits */ + dma_addr_t rcvhdrq_phys; + dma_addr_t rcvhdrqtailaddr_phys; + struct ctxt_eager_bufs egrbufs; + /* this receive context's assigned PIO ACK send context */ + struct send_context *sc; + + /* dynamic receive available interrupt timeout */ + u32 rcvavail_timeout; + /* + * number of opens (including slave sub-contexts) on this instance + * (ignoring forks, dup, etc. for now) + */ + int cnt; + /* + * how much space to leave at start of eager TID entries for + * protocol use, on each TID + */ + /* instead of calculating it */ + unsigned ctxt; + /* non-zero if ctxt is being shared. */ + u16 subctxt_cnt; + /* non-zero if ctxt is being shared. */ + u16 subctxt_id; + u8 uuid[16]; + /* job key */ + u16 jkey; + /* number of RcvArray groups for this context. */ + u32 rcv_array_groups; + /* index of first eager TID entry. */ + u32 eager_base; + /* number of expected TID entries */ + u32 expected_count; + /* index of first expected TID entry. */ + u32 expected_base; + /* cursor into the exp group sets */ + atomic_t tidcursor; + /* number of exp TID groups assigned to the ctxt */ + u16 numtidgroups; + /* size of exp TID group fields in tidusemap */ + u16 tidmapcnt; + /* exp TID group usage bitfield array */ + unsigned long *tidusemap; + /* pinned pages for exp sends, allocated at open */ + struct page **tid_pg_list; + /* dma handles for exp tid pages */ + dma_addr_t *physshadow; + /* lock protecting all Expected TID data */ + spinlock_t exp_lock; + /* number of pio bufs for this ctxt (all procs, if shared) */ + u32 piocnt; + /* first pio buffer for this ctxt */ + u32 pio_base; + /* chip offset of PIO buffers for this ctxt */ + u32 piobufs; + /* per-context configuration flags */ + u16 flags; + /* per-context event flags for fileops/intr communication */ + unsigned long event_flags; + /* WAIT_RCV that timed out, no interrupt */ + u32 rcvwait_to; + /* WAIT_PIO that timed out, no interrupt */ + u32 piowait_to; + /* WAIT_RCV already happened, no wait */ + u32 rcvnowait; + /* WAIT_PIO already happened, no wait */ + u32 pionowait; + /* total number of polled urgent packets */ + u32 urgent; + /* saved total number of polled urgent packets for poll edge trigger */ + u32 urgent_poll; + /* pid of process using this ctxt */ + pid_t pid; + pid_t subpid[HFI1_MAX_SHARED_CTXTS]; + /* same size as task_struct .comm[], command that opened context */ + char comm[16]; + /* so file ops can get at unit */ + struct hfi1_devdata *dd; + /* so functions that need physical port can get it easily */ + struct hfi1_pportdata *ppd; + /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */ + void *subctxt_uregbase; + /* An array of pages for the eager receive buffers * N */ + void *subctxt_rcvegrbuf; + /* An array of pages for the eager header queue entries * N */ + void *subctxt_rcvhdr_base; + /* The version of the library which opened this ctxt */ + u32 userversion; + /* Bitmask of active slaves */ + u32 active_slaves; + /* Type of packets or conditions we want to poll for */ + u16 poll_type; + /* receive packet sequence counter */ + u8 seq_cnt; + u8 redirect_seq_cnt; + /* ctxt rcvhdrq head offset */ + u32 head; + u32 pkt_count; + /* QPs waiting for context processing */ + struct list_head qp_wait_list; + /* interrupt handling */ + u64 imask; /* clear interrupt mask */ + int ireg; /* clear interrupt register */ + unsigned numa_id; /* numa node of this context */ + /* verbs stats per CTX */ + struct hfi1_opcode_stats_perctx *opstats; + /* + * This is the kernel thread that will keep making + * progress on the user sdma requests behind the scenes. + * There is one per context (shared contexts use the master's). + */ + struct task_struct *progress; + struct list_head sdma_queues; + spinlock_t sdma_qlock; + +#ifdef CONFIG_PRESCAN_RXQ + struct ps_state ps_state; +#endif /* CONFIG_PRESCAN_RXQ */ + + /* + * The interrupt handler for a particular receive context can vary + * throughout it's lifetime. This is not a lock protected data member so + * it must be updated atomically and the prev and new value must always + * be valid. Worst case is we process an extra interrupt and up to 64 + * packets with the wrong interrupt handler. + */ + void (*do_interrupt)(struct hfi1_ctxtdata *rcd); +}; + +/* + * Represents a single packet at a high level. Put commonly computed things in + * here so we do not have to keep doing them over and over. The rule of thumb is + * if something is used one time to derive some value, store that something in + * here. If it is used multiple times, then store the result of that derivation + * in here. + */ +struct hfi1_packet { + void *ebuf; + void *hdr; + struct hfi1_ctxtdata *rcd; + __le32 *rhf_addr; + struct hfi1_qp *qp; + struct hfi1_other_headers *ohdr; + u64 rhf; + u32 maxcnt; + u32 rhqoff; + u32 hdrqtail; + int numpkt; + u16 tlen; + u16 hlen; + s16 etail; + u16 rsize; + u8 updegr; + u8 rcv_flags; + u8 etype; +}; + +static inline bool has_sc4_bit(struct hfi1_packet *p) +{ + return !!rhf_dc_info(p->rhf); +} + +/* + * Private data for snoop/capture support. + */ +struct hfi1_snoop_data { + int mode_flag; + struct cdev cdev; + struct device *class_dev; + spinlock_t snoop_lock; + struct list_head queue; + wait_queue_head_t waitq; + void *filter_value; + int (*filter_callback)(void *hdr, void *data, void *value); + u64 dcc_cfg; /* saved value of DCC Cfg register */ +}; + +/* snoop mode_flag values */ +#define HFI1_PORT_SNOOP_MODE 1U +#define HFI1_PORT_CAPTURE_MODE 2U + +struct hfi1_sge_state; + +/* + * Get/Set IB link-level config parameters for f_get/set_ib_cfg() + * Mostly for MADs that set or query link parameters, also ipath + * config interfaces + */ +#define HFI1_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */ +#define HFI1_IB_CFG_LWID_DG_ENB 1 /* allowed Link-width downgrade */ +#define HFI1_IB_CFG_LWID_ENB 2 /* allowed Link-width */ +#define HFI1_IB_CFG_LWID 3 /* currently active Link-width */ +#define HFI1_IB_CFG_SPD_ENB 4 /* allowed Link speeds */ +#define HFI1_IB_CFG_SPD 5 /* current Link spd */ +#define HFI1_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */ +#define HFI1_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */ +#define HFI1_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */ +#define HFI1_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */ +#define HFI1_IB_CFG_OP_VLS 10 /* operational VLs */ +#define HFI1_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */ +#define HFI1_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */ +#define HFI1_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */ +#define HFI1_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */ +#define HFI1_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */ +#define HFI1_IB_CFG_PKEYS 16 /* update partition keys */ +#define HFI1_IB_CFG_MTU 17 /* update MTU in IBC */ +#define HFI1_IB_CFG_VL_HIGH_LIMIT 19 +#define HFI1_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */ +#define HFI1_IB_CFG_PORT 21 /* switch port we are connected to */ + +/* + * HFI or Host Link States + * + * These describe the states the driver thinks the logical and physical + * states are in. Used as an argument to set_link_state(). Implemented + * as bits for easy multi-state checking. The actual state can only be + * one. + */ +#define __HLS_UP_INIT_BP 0 +#define __HLS_UP_ARMED_BP 1 +#define __HLS_UP_ACTIVE_BP 2 +#define __HLS_DN_DOWNDEF_BP 3 /* link down default */ +#define __HLS_DN_POLL_BP 4 +#define __HLS_DN_DISABLE_BP 5 +#define __HLS_DN_OFFLINE_BP 6 +#define __HLS_VERIFY_CAP_BP 7 +#define __HLS_GOING_UP_BP 8 +#define __HLS_GOING_OFFLINE_BP 9 +#define __HLS_LINK_COOLDOWN_BP 10 + +#define HLS_UP_INIT (1 << __HLS_UP_INIT_BP) +#define HLS_UP_ARMED (1 << __HLS_UP_ARMED_BP) +#define HLS_UP_ACTIVE (1 << __HLS_UP_ACTIVE_BP) +#define HLS_DN_DOWNDEF (1 << __HLS_DN_DOWNDEF_BP) /* link down default */ +#define HLS_DN_POLL (1 << __HLS_DN_POLL_BP) +#define HLS_DN_DISABLE (1 << __HLS_DN_DISABLE_BP) +#define HLS_DN_OFFLINE (1 << __HLS_DN_OFFLINE_BP) +#define HLS_VERIFY_CAP (1 << __HLS_VERIFY_CAP_BP) +#define HLS_GOING_UP (1 << __HLS_GOING_UP_BP) +#define HLS_GOING_OFFLINE (1 << __HLS_GOING_OFFLINE_BP) +#define HLS_LINK_COOLDOWN (1 << __HLS_LINK_COOLDOWN_BP) + +#define HLS_UP (HLS_UP_INIT | HLS_UP_ARMED | HLS_UP_ACTIVE) + +/* use this MTU size if none other is given */ +#define HFI1_DEFAULT_ACTIVE_MTU 8192 +/* use this MTU size as the default maximum */ +#define HFI1_DEFAULT_MAX_MTU 8192 +/* default partition key */ +#define DEFAULT_PKEY 0xffff + +/* + * Possible fabric manager config parameters for fm_{get,set}_table() + */ +#define FM_TBL_VL_HIGH_ARB 1 /* Get/set VL high prio weights */ +#define FM_TBL_VL_LOW_ARB 2 /* Get/set VL low prio weights */ +#define FM_TBL_BUFFER_CONTROL 3 /* Get/set Buffer Control */ +#define FM_TBL_SC2VLNT 4 /* Get/set SC->VLnt */ +#define FM_TBL_VL_PREEMPT_ELEMS 5 /* Get (no set) VL preempt elems */ +#define FM_TBL_VL_PREEMPT_MATRIX 6 /* Get (no set) VL preempt matrix */ + +/* + * Possible "operations" for f_rcvctrl(ppd, op, ctxt) + * these are bits so they can be combined, e.g. + * HFI1_RCVCTRL_INTRAVAIL_ENB | HFI1_RCVCTRL_CTXT_ENB + */ +#define HFI1_RCVCTRL_TAILUPD_ENB 0x01 +#define HFI1_RCVCTRL_TAILUPD_DIS 0x02 +#define HFI1_RCVCTRL_CTXT_ENB 0x04 +#define HFI1_RCVCTRL_CTXT_DIS 0x08 +#define HFI1_RCVCTRL_INTRAVAIL_ENB 0x10 +#define HFI1_RCVCTRL_INTRAVAIL_DIS 0x20 +#define HFI1_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */ +#define HFI1_RCVCTRL_PKEY_DIS 0x80 +#define HFI1_RCVCTRL_TIDFLOW_ENB 0x0400 +#define HFI1_RCVCTRL_TIDFLOW_DIS 0x0800 +#define HFI1_RCVCTRL_ONE_PKT_EGR_ENB 0x1000 +#define HFI1_RCVCTRL_ONE_PKT_EGR_DIS 0x2000 +#define HFI1_RCVCTRL_NO_RHQ_DROP_ENB 0x4000 +#define HFI1_RCVCTRL_NO_RHQ_DROP_DIS 0x8000 +#define HFI1_RCVCTRL_NO_EGR_DROP_ENB 0x10000 +#define HFI1_RCVCTRL_NO_EGR_DROP_DIS 0x20000 + +/* partition enforcement flags */ +#define HFI1_PART_ENFORCE_IN 0x1 +#define HFI1_PART_ENFORCE_OUT 0x2 + +/* how often we check for synthetic counter wrap around */ +#define SYNTH_CNT_TIME 2 + +/* Counter flags */ +#define CNTR_NORMAL 0x0 /* Normal counters, just read register */ +#define CNTR_SYNTH 0x1 /* Synthetic counters, saturate at all 1s */ +#define CNTR_DISABLED 0x2 /* Disable this counter */ +#define CNTR_32BIT 0x4 /* Simulate 64 bits for this counter */ +#define CNTR_VL 0x8 /* Per VL counter */ +#define CNTR_INVALID_VL -1 /* Specifies invalid VL */ +#define CNTR_MODE_W 0x0 +#define CNTR_MODE_R 0x1 + +/* VLs Supported/Operational */ +#define HFI1_MIN_VLS_SUPPORTED 1 +#define HFI1_MAX_VLS_SUPPORTED 8 + +static inline void incr_cntr64(u64 *cntr) +{ + if (*cntr < (u64)-1LL) + (*cntr)++; +} + +static inline void incr_cntr32(u32 *cntr) +{ + if (*cntr < (u32)-1LL) + (*cntr)++; +} + +#define MAX_NAME_SIZE 64 +struct hfi1_msix_entry { + struct msix_entry msix; + void *arg; + char name[MAX_NAME_SIZE]; + cpumask_var_t mask; +}; + +/* per-SL CCA information */ +struct cca_timer { + struct hrtimer hrtimer; + struct hfi1_pportdata *ppd; /* read-only */ + int sl; /* read-only */ + u16 ccti; /* read/write - current value of CCTI */ +}; + +struct link_down_reason { + /* + * SMA-facing value. Should be set from .latest when + * HLS_UP_* -> HLS_DN_* transition actually occurs. + */ + u8 sma; + u8 latest; +}; + +enum { + LO_PRIO_TABLE, + HI_PRIO_TABLE, + MAX_PRIO_TABLE +}; + +struct vl_arb_cache { + spinlock_t lock; + struct ib_vl_weight_elem table[VL_ARB_TABLE_SIZE]; +}; + +/* + * The structure below encapsulates data relevant to a physical IB Port. + * Current chips support only one such port, but the separation + * clarifies things a bit. Note that to conform to IB conventions, + * port-numbers are one-based. The first or only port is port1. + */ +struct hfi1_pportdata { + struct hfi1_ibport ibport_data; + + struct hfi1_devdata *dd; + struct kobject pport_cc_kobj; + struct kobject sc2vl_kobj; + struct kobject sl2sc_kobj; + struct kobject vl2mtu_kobj; + + /* QSFP support */ + struct qsfp_data qsfp_info; + + /* GUID for this interface, in host order */ + u64 guid; + /* GUID for peer interface, in host order */ + u64 neighbor_guid; + + /* up or down physical link state */ + u32 linkup; + + /* + * this address is mapped read-only into user processes so they can + * get status cheaply, whenever they want. One qword of status per port + */ + u64 *statusp; + + /* SendDMA related entries */ + + struct workqueue_struct *hfi1_wq; + + /* move out of interrupt context */ + struct work_struct link_vc_work; + struct work_struct link_up_work; + struct work_struct link_down_work; + struct work_struct sma_message_work; + struct work_struct freeze_work; + struct work_struct link_downgrade_work; + struct work_struct link_bounce_work; + /* host link state variables */ + struct mutex hls_lock; + u32 host_link_state; + + spinlock_t sdma_alllock ____cacheline_aligned_in_smp; + + u32 lstate; /* logical link state */ + + /* these are the "32 bit" regs */ + + u32 ibmtu; /* The MTU programmed for this unit */ + /* + * Current max size IB packet (in bytes) including IB headers, that + * we can send. Changes when ibmtu changes. + */ + u32 ibmaxlen; + u32 current_egress_rate; /* units [10^6 bits/sec] */ + /* LID programmed for this instance */ + u16 lid; + /* list of pkeys programmed; 0 if not set */ + u16 pkeys[MAX_PKEY_VALUES]; + u16 link_width_supported; + u16 link_width_downgrade_supported; + u16 link_speed_supported; + u16 link_width_enabled; + u16 link_width_downgrade_enabled; + u16 link_speed_enabled; + u16 link_width_active; + u16 link_width_downgrade_tx_active; + u16 link_width_downgrade_rx_active; + u16 link_speed_active; + u8 vls_supported; + u8 vls_operational; + /* LID mask control */ + u8 lmc; + /* Rx Polarity inversion (compensate for ~tx on partner) */ + u8 rx_pol_inv; + + u8 hw_pidx; /* physical port index */ + u8 port; /* IB port number and index into dd->pports - 1 */ + /* type of neighbor node */ + u8 neighbor_type; + u8 neighbor_normal; + u8 neighbor_fm_security; /* 1 if firmware checking is disabled */ + u8 neighbor_port_number; + u8 is_sm_config_started; + u8 offline_disabled_reason; + u8 is_active_optimize_enabled; + u8 driver_link_ready; /* driver ready for active link */ + u8 link_enabled; /* link enabled? */ + u8 linkinit_reason; + u8 local_tx_rate; /* rate given to 8051 firmware */ + + /* placeholders for IB MAD packet settings */ + u8 overrun_threshold; + u8 phy_error_threshold; + + /* used to override LED behavior */ + u8 led_override; /* Substituted for normal value, if non-zero */ + u16 led_override_timeoff; /* delta to next timer event */ + u8 led_override_vals[2]; /* Alternates per blink-frame */ + u8 led_override_phase; /* Just counts, LSB picks from vals[] */ + atomic_t led_override_timer_active; + /* Used to flash LEDs in override mode */ + struct timer_list led_override_timer; + u32 sm_trap_qp; + u32 sa_qp; + + /* + * cca_timer_lock protects access to the per-SL cca_timer + * structures (specifically the ccti member). + */ + spinlock_t cca_timer_lock ____cacheline_aligned_in_smp; + struct cca_timer cca_timer[OPA_MAX_SLS]; + + /* List of congestion control table entries */ + struct ib_cc_table_entry_shadow ccti_entries[CC_TABLE_SHADOW_MAX]; + + /* congestion entries, each entry corresponding to a SL */ + struct opa_congestion_setting_entry_shadow + congestion_entries[OPA_MAX_SLS]; + + /* + * cc_state_lock protects (write) access to the per-port + * struct cc_state. + */ + spinlock_t cc_state_lock ____cacheline_aligned_in_smp; + + struct cc_state __rcu *cc_state; + + /* Total number of congestion control table entries */ + u16 total_cct_entry; + + /* Bit map identifying service level */ + u32 cc_sl_control_map; + + /* CA's max number of 64 entry units in the congestion control table */ + u8 cc_max_table_entries; + + /* begin congestion log related entries + * cc_log_lock protects all congestion log related data */ + spinlock_t cc_log_lock ____cacheline_aligned_in_smp; + u8 threshold_cong_event_map[OPA_MAX_SLS/8]; + u16 threshold_event_counter; + struct opa_hfi1_cong_log_event_internal cc_events[OPA_CONG_LOG_ELEMS]; + int cc_log_idx; /* index for logging events */ + int cc_mad_idx; /* index for reporting events */ + /* end congestion log related entries */ + + struct vl_arb_cache vl_arb_cache[MAX_PRIO_TABLE]; + + /* port relative counter buffer */ + u64 *cntrs; + /* port relative synthetic counter buffer */ + u64 *scntrs; + /* we synthesize port_xmit_discards from several egress errors */ + u64 port_xmit_discards; + u64 port_xmit_constraint_errors; + u64 port_rcv_constraint_errors; + /* count of 'link_err' interrupts from DC */ + u64 link_downed; + /* number of times link retrained successfully */ + u64 link_up; + /* port_ltp_crc_mode is returned in 'portinfo' MADs */ + u16 port_ltp_crc_mode; + /* port_crc_mode_enabled is the crc we support */ + u8 port_crc_mode_enabled; + /* mgmt_allowed is also returned in 'portinfo' MADs */ + u8 mgmt_allowed; + u8 part_enforce; /* partition enforcement flags */ + struct link_down_reason local_link_down_reason; + struct link_down_reason neigh_link_down_reason; + /* Value to be sent to link peer on LinkDown .*/ + u8 remote_link_down_reason; + /* Error events that will cause a port bounce. */ + u32 port_error_action; +}; + +typedef int (*rhf_rcv_function_ptr)(struct hfi1_packet *packet); + +typedef void (*opcode_handler)(struct hfi1_packet *packet); + +/* return values for the RHF receive functions */ +#define RHF_RCV_CONTINUE 0 /* keep going */ +#define RHF_RCV_DONE 1 /* stop, this packet processed */ +#define RHF_RCV_REPROCESS 2 /* stop. retain this packet */ + +struct rcv_array_data { + u8 group_size; + u16 ngroups; + u16 nctxt_extra; +}; + +struct per_vl_data { + u16 mtu; + struct send_context *sc; +}; + +/* 16 to directly index */ +#define PER_VL_SEND_CONTEXTS 16 + +struct err_info_rcvport { + u8 status_and_code; + u64 packet_flit1; + u64 packet_flit2; +}; + +struct err_info_constraint { + u8 status; + u16 pkey; + u32 slid; +}; + +struct hfi1_temp { + unsigned int curr; /* current temperature */ + unsigned int lo_lim; /* low temperature limit */ + unsigned int hi_lim; /* high temperature limit */ + unsigned int crit_lim; /* critical temperature limit */ + u8 triggers; /* temperature triggers */ +}; + +/* device data struct now contains only "general per-device" info. + * fields related to a physical IB port are in a hfi1_pportdata struct. + */ +struct sdma_engine; +struct sdma_vl_map; + +#define BOARD_VERS_MAX 96 /* how long the version string can be */ +#define SERIAL_MAX 16 /* length of the serial number */ + +struct hfi1_devdata { + struct hfi1_ibdev verbs_dev; /* must be first */ + struct list_head list; + /* pointers to related structs for this device */ + /* pci access data structure */ + struct pci_dev *pcidev; + struct cdev user_cdev; + struct cdev diag_cdev; + struct cdev ui_cdev; + struct device *user_device; + struct device *diag_device; + struct device *ui_device; + + /* mem-mapped pointer to base of chip regs */ + u8 __iomem *kregbase; + /* end of mem-mapped chip space excluding sendbuf and user regs */ + u8 __iomem *kregend; + /* physical address of chip for io_remap, etc. */ + resource_size_t physaddr; + /* receive context data */ + struct hfi1_ctxtdata **rcd; + /* send context data */ + struct send_context_info *send_contexts; + /* map hardware send contexts to software index */ + u8 *hw_to_sw; + /* spinlock for allocating and releasing send context resources */ + spinlock_t sc_lock; + /* Per VL data. Enough for all VLs but not all elements are set/used. */ + struct per_vl_data vld[PER_VL_SEND_CONTEXTS]; + /* seqlock for sc2vl */ + seqlock_t sc2vl_lock; + u64 sc2vl[4]; + /* Send Context initialization lock. */ + spinlock_t sc_init_lock; + + /* fields common to all SDMA engines */ + + /* default flags to last descriptor */ + u64 default_desc1; + volatile __le64 *sdma_heads_dma; /* DMA'ed by chip */ + dma_addr_t sdma_heads_phys; + void *sdma_pad_dma; /* DMA'ed by chip */ + dma_addr_t sdma_pad_phys; + /* for deallocation */ + size_t sdma_heads_size; + /* number from the chip */ + u32 chip_sdma_engines; + /* num used */ + u32 num_sdma; + /* lock for sdma_map */ + spinlock_t sde_map_lock; + /* array of engines sized by num_sdma */ + struct sdma_engine *per_sdma; + /* array of vl maps */ + struct sdma_vl_map __rcu *sdma_map; + /* SPC freeze waitqueue and variable */ + wait_queue_head_t sdma_unfreeze_wq; + atomic_t sdma_unfreeze_count; + + + /* hfi1_pportdata, points to array of (physical) port-specific + * data structs, indexed by pidx (0..n-1) + */ + struct hfi1_pportdata *pport; + + /* mem-mapped pointer to base of PIO buffers */ + void __iomem *piobase; + /* + * write-combining mem-mapped pointer to base of RcvArray + * memory. + */ + void __iomem *rcvarray_wc; + /* + * credit return base - a per-NUMA range of DMA address that + * the chip will use to update the per-context free counter + */ + struct credit_return_base *cr_base; + + /* send context numbers and sizes for each type */ + struct sc_config_sizes sc_sizes[SC_MAX]; + + u32 lcb_access_count; /* count of LCB users */ + + char *boardname; /* human readable board info */ + + /* device (not port) flags, basically device capabilities */ + u32 flags; + + /* reset value */ + u64 z_int_counter; + u64 z_rcv_limit; + /* percpu int_counter */ + u64 __percpu *int_counter; + u64 __percpu *rcv_limit; + + /* number of receive contexts in use by the driver */ + u32 num_rcv_contexts; + /* number of pio send contexts in use by the driver */ + u32 num_send_contexts; + /* + * number of ctxts available for PSM open + */ + u32 freectxts; + /* base receive interrupt timeout, in CSR units */ + u32 rcv_intr_timeout_csr; + + u64 __iomem *egrtidbase; + spinlock_t sendctrl_lock; /* protect changes to SendCtrl */ + spinlock_t rcvctrl_lock; /* protect changes to RcvCtrl */ + /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */ + spinlock_t uctxt_lock; /* rcd and user context changes */ + /* exclusive access to 8051 */ + spinlock_t dc8051_lock; + /* exclusive access to 8051 memory */ + spinlock_t dc8051_memlock; + int dc8051_timed_out; /* remember if the 8051 timed out */ + /* + * A page that will hold event notification bitmaps for all + * contexts. This page will be mapped into all processes. + */ + unsigned long *events; + /* + * per unit status, see also portdata statusp + * mapped read-only into user processes so they can get unit and + * IB link status cheaply + */ + struct hfi1_status *status; + u32 freezelen; /* max length of freezemsg */ + + /* revision register shadow */ + u64 revision; + /* Base GUID for device (network order) */ + u64 base_guid; + + /* these are the "32 bit" regs */ + + /* value we put in kr_rcvhdrsize */ + u32 rcvhdrsize; + /* number of receive contexts the chip supports */ + u32 chip_rcv_contexts; + /* number of receive array entries */ + u32 chip_rcv_array_count; + /* number of PIO send contexts the chip supports */ + u32 chip_send_contexts; + /* number of bytes in the PIO memory buffer */ + u32 chip_pio_mem_size; + /* number of bytes in the SDMA memory buffer */ + u32 chip_sdma_mem_size; + + /* size of each rcvegrbuffer */ + u32 rcvegrbufsize; + /* log2 of above */ + u16 rcvegrbufsize_shift; + /* both sides of the PCIe link are gen3 capable */ + u8 link_gen3_capable; + /* localbus width (1, 2,4,8,16,32) from config space */ + u32 lbus_width; + /* localbus speed in MHz */ + u32 lbus_speed; + int unit; /* unit # of this chip */ + int node; /* home node of this chip */ + + /* save these PCI fields to restore after a reset */ + u32 pcibar0; + u32 pcibar1; + u32 pci_rom; + u16 pci_command; + u16 pcie_devctl; + u16 pcie_lnkctl; + u16 pcie_devctl2; + u32 pci_msix0; + u32 pci_lnkctl3; + u32 pci_tph2; + + /* + * ASCII serial number, from flash, large enough for original + * all digit strings, and longer serial number format + */ + u8 serial[SERIAL_MAX]; + /* human readable board version */ + u8 boardversion[BOARD_VERS_MAX]; + u8 lbus_info[32]; /* human readable localbus info */ + /* chip major rev, from CceRevision */ + u8 majrev; + /* chip minor rev, from CceRevision */ + u8 minrev; + /* hardware ID */ + u8 hfi1_id; + /* implementation code */ + u8 icode; + /* default link down value (poll/sleep) */ + u8 link_default; + /* vAU of this device */ + u8 vau; + /* vCU of this device */ + u8 vcu; + /* link credits of this device */ + u16 link_credits; + /* initial vl15 credits to use */ + u16 vl15_init; + + /* Misc small ints */ + /* Number of physical ports available */ + u8 num_pports; + /* Lowest context number which can be used by user processes */ + u8 first_user_ctxt; + u8 n_krcv_queues; + u8 qos_shift; + u8 qpn_mask; + + u16 rhf_offset; /* offset of RHF within receive header entry */ + u16 irev; /* implementation revision */ + u16 dc8051_ver; /* 8051 firmware version */ + + struct platform_config_cache pcfg_cache; + /* control high-level access to qsfp */ + struct mutex qsfp_i2c_mutex; + + struct diag_client *diag_client; + spinlock_t hfi1_diag_trans_lock; /* protect diag observer ops */ + + u8 psxmitwait_supported; + /* cycle length of PS* counters in HW (in picoseconds) */ + u16 psxmitwait_check_rate; + /* high volume overflow errors deferred to tasklet */ + struct tasklet_struct error_tasklet; + /* per device cq worker */ + struct kthread_worker *worker; + + /* MSI-X information */ + struct hfi1_msix_entry *msix_entries; + u32 num_msix_entries; + + /* INTx information */ + u32 requested_intx_irq; /* did we request one? */ + char intx_name[MAX_NAME_SIZE]; /* INTx name */ + + /* general interrupt: mask of handled interrupts */ + u64 gi_mask[CCE_NUM_INT_CSRS]; + + struct rcv_array_data rcv_entries; + + /* + * 64 bit synthetic counters + */ + struct timer_list synth_stats_timer; + + /* + * device counters + */ + char *cntrnames; + size_t cntrnameslen; + size_t ndevcntrs; + u64 *cntrs; + u64 *scntrs; + + /* + * remembered values for synthetic counters + */ + u64 last_tx; + u64 last_rx; + + /* + * per-port counters + */ + size_t nportcntrs; + char *portcntrnames; + size_t portcntrnameslen; + + struct hfi1_snoop_data hfi1_snoop; + + struct err_info_rcvport err_info_rcvport; + struct err_info_constraint err_info_rcv_constraint; + struct err_info_constraint err_info_xmit_constraint; + u8 err_info_uncorrectable; + u8 err_info_fmconfig; + + atomic_t drop_packet; + u8 do_drop; + + /* receive interrupt functions */ + rhf_rcv_function_ptr *rhf_rcv_function_map; + rhf_rcv_function_ptr normal_rhf_rcv_functions[8]; + + /* + * Handlers for outgoing data so that snoop/capture does not + * have to have its hooks in the send path + */ + int (*process_pio_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, + u32 len, u32 plen, u32 dwords, u64 pbc); + int (*process_dma_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, + u32 len, u32 plen, u32 dwords, u64 pbc); + void (*pio_inline_send)(struct hfi1_devdata *dd, struct pio_buf *pbuf, + u64 pbc, const void *from, size_t count); + + /* OUI comes from the HW. Used everywhere as 3 separate bytes. */ + u8 oui1; + u8 oui2; + u8 oui3; + /* Timer and counter used to detect RcvBufOvflCnt changes */ + struct timer_list rcverr_timer; + u32 rcv_ovfl_cnt; + + int assigned_node_id; + wait_queue_head_t event_queue; + + /* Save the enabled LCB error bits */ + u64 lcb_err_en; + u8 dc_shutdown; +}; + +/* 8051 firmware version helper */ +#define dc8051_ver(a, b) ((a) << 8 | (b)) + +/* f_put_tid types */ +#define PT_EXPECTED 0 +#define PT_EAGER 1 +#define PT_INVALID 2 + +/* Private data for file operations */ +struct hfi1_filedata { + struct hfi1_ctxtdata *uctxt; + unsigned subctxt; + struct hfi1_user_sdma_comp_q *cq; + struct hfi1_user_sdma_pkt_q *pq; + /* for cpu affinity; -1 if none */ + int rec_cpu_num; +}; + +extern struct list_head hfi1_dev_list; +extern spinlock_t hfi1_devs_lock; +struct hfi1_devdata *hfi1_lookup(int unit); +extern u32 hfi1_cpulist_count; +extern unsigned long *hfi1_cpulist; + +extern unsigned int snoop_drop_send; +extern unsigned int snoop_force_capture; +int hfi1_init(struct hfi1_devdata *, int); +int hfi1_count_units(int *npresentp, int *nupp); +int hfi1_count_active_units(void); + +int hfi1_diag_add(struct hfi1_devdata *); +void hfi1_diag_remove(struct hfi1_devdata *); +void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup); + +void handle_user_interrupt(struct hfi1_ctxtdata *rcd); + +int hfi1_create_rcvhdrq(struct hfi1_devdata *, struct hfi1_ctxtdata *); +int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *); +int hfi1_create_ctxts(struct hfi1_devdata *dd); +struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *, u32); +void hfi1_init_pportdata(struct pci_dev *, struct hfi1_pportdata *, + struct hfi1_devdata *, u8, u8); +void hfi1_free_ctxtdata(struct hfi1_devdata *, struct hfi1_ctxtdata *); + +void handle_receive_interrupt(struct hfi1_ctxtdata *); +void handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd); +void handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd); +int hfi1_reset_device(int); + +/* return the driver's idea of the logical OPA port state */ +static inline u32 driver_lstate(struct hfi1_pportdata *ppd) +{ + return ppd->lstate; /* use the cached value */ +} + +static inline u16 generate_jkey(kuid_t uid) +{ + return from_kuid(current_user_ns(), uid) & 0xffff; +} + +/* + * active_egress_rate + * + * returns the active egress rate in units of [10^6 bits/sec] + */ +static inline u32 active_egress_rate(struct hfi1_pportdata *ppd) +{ + u16 link_speed = ppd->link_speed_active; + u16 link_width = ppd->link_width_active; + u32 egress_rate; + + if (link_speed == OPA_LINK_SPEED_25G) + egress_rate = 25000; + else /* assume OPA_LINK_SPEED_12_5G */ + egress_rate = 12500; + + switch (link_width) { + case OPA_LINK_WIDTH_4X: + egress_rate *= 4; + break; + case OPA_LINK_WIDTH_3X: + egress_rate *= 3; + break; + case OPA_LINK_WIDTH_2X: + egress_rate *= 2; + break; + default: + /* assume IB_WIDTH_1X */ + break; + } + + return egress_rate; +} + +/* + * egress_cycles + * + * Returns the number of 'fabric clock cycles' to egress a packet + * of length 'len' bytes, at 'rate' Mbit/s. Since the fabric clock + * rate is (approximately) 805 MHz, the units of the returned value + * are (1/805 MHz). + */ +static inline u32 egress_cycles(u32 len, u32 rate) +{ + u32 cycles; + + /* + * cycles is: + * + * (length) [bits] / (rate) [bits/sec] + * --------------------------------------------------- + * fabric_clock_period == 1 /(805 * 10^6) [cycles/sec] + */ + + cycles = len * 8; /* bits */ + cycles *= 805; + cycles /= rate; + + return cycles; +} + +void set_link_ipg(struct hfi1_pportdata *ppd); +void process_becn(struct hfi1_pportdata *ppd, u8 sl, u16 rlid, u32 lqpn, + u32 rqpn, u8 svc_type); +void return_cnp(struct hfi1_ibport *ibp, struct hfi1_qp *qp, u32 remote_qpn, + u32 pkey, u32 slid, u32 dlid, u8 sc5, + const struct ib_grh *old_grh); + +#define PACKET_EGRESS_TIMEOUT 350 +static inline void pause_for_credit_return(struct hfi1_devdata *dd) +{ + /* Pause at least 1us, to ensure chip returns all credits */ + u32 usec = cclock_to_ns(dd, PACKET_EGRESS_TIMEOUT) / 1000; + + udelay(usec ? usec : 1); +} + +/** + * sc_to_vlt() reverse lookup sc to vl + * @dd - devdata + * @sc5 - 5 bit sc + */ +static inline u8 sc_to_vlt(struct hfi1_devdata *dd, u8 sc5) +{ + unsigned seq; + u8 rval; + + if (sc5 >= OPA_MAX_SCS) + return (u8)(0xff); + + do { + seq = read_seqbegin(&dd->sc2vl_lock); + rval = *(((u8 *)dd->sc2vl) + sc5); + } while (read_seqretry(&dd->sc2vl_lock, seq)); + + return rval; +} + +#define PKEY_MEMBER_MASK 0x8000 +#define PKEY_LOW_15_MASK 0x7fff + +/* + * ingress_pkey_matches_entry - return 1 if the pkey matches ent (ent + * being an entry from the ingress partition key table), return 0 + * otherwise. Use the matching criteria for ingress partition keys + * specified in the OPAv1 spec., section 9.10.14. + */ +static inline int ingress_pkey_matches_entry(u16 pkey, u16 ent) +{ + u16 mkey = pkey & PKEY_LOW_15_MASK; + u16 ment = ent & PKEY_LOW_15_MASK; + + if (mkey == ment) { + /* + * If pkey[15] is clear (limited partition member), + * is bit 15 in the corresponding table element + * clear (limited member)? + */ + if (!(pkey & PKEY_MEMBER_MASK)) + return !!(ent & PKEY_MEMBER_MASK); + return 1; + } + return 0; +} + +/* + * ingress_pkey_table_search - search the entire pkey table for + * an entry which matches 'pkey'. return 0 if a match is found, + * and 1 otherwise. + */ +static int ingress_pkey_table_search(struct hfi1_pportdata *ppd, u16 pkey) +{ + int i; + + for (i = 0; i < MAX_PKEY_VALUES; i++) { + if (ingress_pkey_matches_entry(pkey, ppd->pkeys[i])) + return 0; + } + return 1; +} + +/* + * ingress_pkey_table_fail - record a failure of ingress pkey validation, + * i.e., increment port_rcv_constraint_errors for the port, and record + * the 'error info' for this failure. + */ +static void ingress_pkey_table_fail(struct hfi1_pportdata *ppd, u16 pkey, + u16 slid) +{ + struct hfi1_devdata *dd = ppd->dd; + + incr_cntr64(&ppd->port_rcv_constraint_errors); + if (!(dd->err_info_rcv_constraint.status & OPA_EI_STATUS_SMASK)) { + dd->err_info_rcv_constraint.status |= OPA_EI_STATUS_SMASK; + dd->err_info_rcv_constraint.slid = slid; + dd->err_info_rcv_constraint.pkey = pkey; + } +} + +/* + * ingress_pkey_check - Return 0 if the ingress pkey is valid, return 1 + * otherwise. Use the criteria in the OPAv1 spec, section 9.10.14. idx + * is a hint as to the best place in the partition key table to begin + * searching. This function should not be called on the data path because + * of performance reasons. On datapath pkey check is expected to be done + * by HW and rcv_pkey_check function should be called instead. + */ +static inline int ingress_pkey_check(struct hfi1_pportdata *ppd, u16 pkey, + u8 sc5, u8 idx, u16 slid) +{ + if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN)) + return 0; + + /* If SC15, pkey[0:14] must be 0x7fff */ + if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK)) + goto bad; + + /* Is the pkey = 0x0, or 0x8000? */ + if ((pkey & PKEY_LOW_15_MASK) == 0) + goto bad; + + /* The most likely matching pkey has index 'idx' */ + if (ingress_pkey_matches_entry(pkey, ppd->pkeys[idx])) + return 0; + + /* no match - try the whole table */ + if (!ingress_pkey_table_search(ppd, pkey)) + return 0; + +bad: + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; +} + +/* + * rcv_pkey_check - Return 0 if the ingress pkey is valid, return 1 + * otherwise. It only ensures pkey is vlid for QP0. This function + * should be called on the data path instead of ingress_pkey_check + * as on data path, pkey check is done by HW (except for QP0). + */ +static inline int rcv_pkey_check(struct hfi1_pportdata *ppd, u16 pkey, + u8 sc5, u16 slid) +{ + if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN)) + return 0; + + /* If SC15, pkey[0:14] must be 0x7fff */ + if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK)) + goto bad; + + return 0; +bad: + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; +} + +/* MTU handling */ + +/* MTU enumeration, 256-4k match IB */ +#define OPA_MTU_0 0 +#define OPA_MTU_256 1 +#define OPA_MTU_512 2 +#define OPA_MTU_1024 3 +#define OPA_MTU_2048 4 +#define OPA_MTU_4096 5 + +u32 lrh_max_header_bytes(struct hfi1_devdata *dd); +int mtu_to_enum(u32 mtu, int default_if_bad); +u16 enum_to_mtu(int); +static inline int valid_ib_mtu(unsigned int mtu) +{ + return mtu == 256 || mtu == 512 || + mtu == 1024 || mtu == 2048 || + mtu == 4096; +} +static inline int valid_opa_max_mtu(unsigned int mtu) +{ + return mtu >= 2048 && + (valid_ib_mtu(mtu) || mtu == 8192 || mtu == 10240); +} + +int set_mtu(struct hfi1_pportdata *); + +int hfi1_set_lid(struct hfi1_pportdata *, u32, u8); +void hfi1_disable_after_error(struct hfi1_devdata *); +int hfi1_set_uevent_bits(struct hfi1_pportdata *, const int); +int hfi1_rcvbuf_validate(u32, u8, u16 *); + +int fm_get_table(struct hfi1_pportdata *, int, void *); +int fm_set_table(struct hfi1_pportdata *, int, void *); + +void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf); +void reset_link_credits(struct hfi1_devdata *dd); +void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu); + +int snoop_recv_handler(struct hfi1_packet *packet); +int snoop_send_dma_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); +int snoop_send_pio_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); +void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf, + u64 pbc, const void *from, size_t count); + +/* for use in system calls, where we want to know device type, etc. */ +#define ctxt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->uctxt) +#define subctxt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->subctxt) +#define tidcursor_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->tidcursor) +#define user_sdma_pkt_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->pq) +#define user_sdma_comp_fp(fp) \ + (((struct hfi1_filedata *)(fp)->private_data)->cq) + +static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd) +{ + return ppd->dd; +} + +static inline struct hfi1_devdata *dd_from_dev(struct hfi1_ibdev *dev) +{ + return container_of(dev, struct hfi1_devdata, verbs_dev); +} + +static inline struct hfi1_devdata *dd_from_ibdev(struct ib_device *ibdev) +{ + return dd_from_dev(to_idev(ibdev)); +} + +static inline struct hfi1_pportdata *ppd_from_ibp(struct hfi1_ibport *ibp) +{ + return container_of(ibp, struct hfi1_pportdata, ibport_data); +} + +static inline struct hfi1_ibport *to_iport(struct ib_device *ibdev, u8 port) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */ + + WARN_ON(pidx >= dd->num_pports); + return &dd->pport[pidx].ibport_data; +} + +/* + * Return the indexed PKEY from the port PKEY table. + */ +static inline u16 hfi1_get_pkey(struct hfi1_ibport *ibp, unsigned index) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u16 ret; + + if (index >= ARRAY_SIZE(ppd->pkeys)) + ret = 0; + else + ret = ppd->pkeys[index]; + + return ret; +} + +/* + * Readers of cc_state must call get_cc_state() under rcu_read_lock(). + * Writers of cc_state must call get_cc_state() under cc_state_lock. + */ +static inline struct cc_state *get_cc_state(struct hfi1_pportdata *ppd) +{ + return rcu_dereference(ppd->cc_state); +} + +/* + * values for dd->flags (_device_ related flags) + */ +#define HFI1_INITTED 0x1 /* chip and driver up and initted */ +#define HFI1_PRESENT 0x2 /* chip accesses can be done */ +#define HFI1_FROZEN 0x4 /* chip in SPC freeze */ +#define HFI1_HAS_SDMA_TIMEOUT 0x8 +#define HFI1_HAS_SEND_DMA 0x10 /* Supports Send DMA */ +#define HFI1_FORCED_FREEZE 0x80 /* driver forced freeze mode */ +#define HFI1_DO_INIT_ASIC 0x100 /* This device will init the ASIC */ + +/* IB dword length mask in PBC (lower 11 bits); same for all chips */ +#define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1) + + +/* ctxt_flag bit offsets */ + /* context has been setup */ +#define HFI1_CTXT_SETUP_DONE 1 + /* waiting for a packet to arrive */ +#define HFI1_CTXT_WAITING_RCV 2 + /* master has not finished initializing */ +#define HFI1_CTXT_MASTER_UNINIT 4 + /* waiting for an urgent packet to arrive */ +#define HFI1_CTXT_WAITING_URG 5 + +/* free up any allocated data at closes */ +struct hfi1_devdata *hfi1_init_dd(struct pci_dev *, + const struct pci_device_id *); +void hfi1_free_devdata(struct hfi1_devdata *); +void cc_state_reclaim(struct rcu_head *rcu); +struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra); + +/* + * Set LED override, only the two LSBs have "public" meaning, but + * any non-zero value substitutes them for the Link and LinkTrain + * LED states. + */ +#define HFI1_LED_PHYS 1 /* Physical (linktraining) GREEN LED */ +#define HFI1_LED_LOG 2 /* Logical (link) YELLOW LED */ +void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val); + +#define HFI1_CREDIT_RETURN_RATE (100) + +/* + * The number of words for the KDETH protocol field. If this is + * larger then the actual field used, then part of the payload + * will be in the header. + * + * Optimally, we want this sized so that a typical case will + * use full cache lines. The typical local KDETH header would + * be: + * + * Bytes Field + * 8 LRH + * 12 BHT + * ?? KDETH + * 8 RHF + * --- + * 28 + KDETH + * + * For a 64-byte cache line, KDETH would need to be 36 bytes or 9 DWORDS + */ +#define DEFAULT_RCVHDRSIZE 9 + +/* + * Maximal header byte count: + * + * Bytes Field + * 8 LRH + * 40 GRH (optional) + * 12 BTH + * ?? KDETH + * 8 RHF + * --- + * 68 + KDETH + * + * We also want to maintain a cache line alignment to assist DMA'ing + * of the header bytes. Round up to a good size. + */ +#define DEFAULT_RCVHDR_ENTSIZE 32 + +int hfi1_get_user_pages(unsigned long, size_t, struct page **); +void hfi1_release_user_pages(struct page **, size_t); + +static inline void clear_rcvhdrtail(const struct hfi1_ctxtdata *rcd) +{ + *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL; +} + +static inline u32 get_rcvhdrtail(const struct hfi1_ctxtdata *rcd) +{ + /* + * volatile because it's a DMA target from the chip, routine is + * inlined, and don't want register caching or reordering. + */ + return (u32) le64_to_cpu(*rcd->rcvhdrtail_kvaddr); +} + +/* + * sysfs interface. + */ + +extern const char ib_hfi1_version[]; + +int hfi1_device_create(struct hfi1_devdata *); +void hfi1_device_remove(struct hfi1_devdata *); + +int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num, + struct kobject *kobj); +int hfi1_verbs_register_sysfs(struct hfi1_devdata *); +void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *); +/* Hook for sysfs read of QSFP */ +int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len); + +int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *); +void hfi1_pcie_cleanup(struct pci_dev *); +int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *, + const struct pci_device_id *); +void hfi1_pcie_ddcleanup(struct hfi1_devdata *); +void hfi1_pcie_flr(struct hfi1_devdata *); +int pcie_speeds(struct hfi1_devdata *); +void request_msix(struct hfi1_devdata *, u32 *, struct hfi1_msix_entry *); +void hfi1_enable_intx(struct pci_dev *); +void hfi1_nomsix(struct hfi1_devdata *); +void restore_pci_variables(struct hfi1_devdata *dd); +int do_pcie_gen3_transition(struct hfi1_devdata *dd); +int parse_platform_config(struct hfi1_devdata *dd); +int get_platform_config_field(struct hfi1_devdata *dd, + enum platform_config_table_type_encoding table_type, + int table_index, int field_index, u32 *data, u32 len); + +dma_addr_t hfi1_map_page(struct pci_dev *, struct page *, unsigned long, + size_t, int); +const char *get_unit_name(int unit); + +/* + * Flush write combining store buffers (if present) and perform a write + * barrier. + */ +static inline void flush_wc(void) +{ + asm volatile("sfence" : : : "memory"); +} + +void handle_eflags(struct hfi1_packet *packet); +int process_receive_ib(struct hfi1_packet *packet); +int process_receive_bypass(struct hfi1_packet *packet); +int process_receive_error(struct hfi1_packet *packet); +int kdeth_process_expected(struct hfi1_packet *packet); +int kdeth_process_eager(struct hfi1_packet *packet); +int process_receive_invalid(struct hfi1_packet *packet); + +extern rhf_rcv_function_ptr snoop_rhf_rcv_functions[8]; + +void update_sge(struct hfi1_sge_state *ss, u32 length); + +/* global module parameter variables */ +extern unsigned int hfi1_max_mtu; +extern unsigned int hfi1_cu; +extern unsigned int user_credit_return_threshold; +extern uint num_rcv_contexts; +extern unsigned n_krcvqs; +extern u8 krcvqs[]; +extern int krcvqsset; +extern uint kdeth_qp; +extern uint loopback; +extern uint quick_linkup; +extern uint rcv_intr_timeout; +extern uint rcv_intr_count; +extern uint rcv_intr_dynamic; +extern ushort link_crc_mask; + +extern struct mutex hfi1_mutex; + +/* Number of seconds before our card status check... */ +#define STATUS_TIMEOUT 60 + +#define DRIVER_NAME "hfi1" +#define HFI1_USER_MINOR_BASE 0 +#define HFI1_TRACE_MINOR 127 +#define HFI1_DIAGPKT_MINOR 128 +#define HFI1_DIAG_MINOR_BASE 129 +#define HFI1_SNOOP_CAPTURE_BASE 200 +#define HFI1_NMINORS 255 + +#define PCI_VENDOR_ID_INTEL 0x8086 +#define PCI_DEVICE_ID_INTEL0 0x24f0 +#define PCI_DEVICE_ID_INTEL1 0x24f1 + +#define HFI1_PKT_USER_SC_INTEGRITY \ + (SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK \ + | SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK \ + | SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK) + +#define HFI1_PKT_KERNEL_SC_INTEGRITY \ + (SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK) + +static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd, + u16 ctxt_type) +{ + u64 base_sc_integrity = + SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK + | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK + | SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK; + + if (ctxt_type == SC_USER) + base_sc_integrity |= HFI1_PKT_USER_SC_INTEGRITY; + else + base_sc_integrity |= HFI1_PKT_KERNEL_SC_INTEGRITY; + + if (is_a0(dd)) + /* turn off send-side job key checks - A0 erratum */ + return base_sc_integrity & + ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sc_integrity; +} + +static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd) +{ + u64 base_sdma_integrity = + SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK + | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK + | SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK; + + if (is_a0(dd)) + /* turn off send-side job key checks - A0 erratum */ + return base_sdma_integrity & + ~SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sdma_integrity; +} + +/* + * hfi1_early_err is used (only!) to print early errors before devdata is + * allocated, or when dd->pcidev may not be valid, and at the tail end of + * cleanup when devdata may have been freed, etc. hfi1_dev_porterr is + * the same as dd_dev_err, but is used when the message really needs + * the IB port# to be definitive as to what's happening.. + */ +#define hfi1_early_err(dev, fmt, ...) \ + dev_err(dev, fmt, ##__VA_ARGS__) + +#define hfi1_early_info(dev, fmt, ...) \ + dev_info(dev, fmt, ##__VA_ARGS__) + +#define dd_dev_emerg(dd, fmt, ...) \ + dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) +#define dd_dev_err(dd, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) +#define dd_dev_warn(dd, fmt, ...) \ + dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define dd_dev_warn_ratelimited(dd, fmt, ...) \ + dev_warn_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define dd_dev_info(dd, fmt, ...) \ + dev_info(&(dd)->pcidev->dev, "%s: " fmt, \ + get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define hfi1_dev_porterr(dd, port, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \ + get_unit_name((dd)->unit), (dd)->unit, (port), \ + ##__VA_ARGS__) + +/* + * this is used for formatting hw error messages... + */ +struct hfi1_hwerror_msgs { + u64 mask; + const char *msg; + size_t sz; +}; + +/* in intr.c... */ +void hfi1_format_hwerrors(u64 hwerrs, + const struct hfi1_hwerror_msgs *hwerrmsgs, + size_t nhwerrmsgs, char *msg, size_t lmsg); + +#define USER_OPCODE_CHECK_VAL 0xC0 +#define USER_OPCODE_CHECK_MASK 0xC0 +#define OPCODE_CHECK_VAL_DISABLED 0x0 +#define OPCODE_CHECK_MASK_DISABLED 0x0 + +static inline void hfi1_reset_cpu_counters(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int i; + + dd->z_int_counter = get_all_cpu_total(dd->int_counter); + dd->z_rcv_limit = get_all_cpu_total(dd->rcv_limit); + + ppd = (struct hfi1_pportdata *)(dd + 1); + for (i = 0; i < dd->num_pports; i++, ppd++) { + ppd->ibport_data.z_rc_acks = + get_all_cpu_total(ppd->ibport_data.rc_acks); + ppd->ibport_data.z_rc_qacks = + get_all_cpu_total(ppd->ibport_data.rc_qacks); + } +} + +/* Control LED state */ +static inline void setextled(struct hfi1_devdata *dd, u32 on) +{ + if (on) + write_csr(dd, DCC_CFG_LED_CNTRL, 0x1F); + else + write_csr(dd, DCC_CFG_LED_CNTRL, 0x10); +} + +int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp); + +#endif /* _HFI1_KERNEL_H */ diff --git a/drivers/staging/rdma/hfi1/init.c b/drivers/staging/rdma/hfi1/init.c new file mode 100644 index 000000000000..a877eda8c13c --- /dev/null +++ b/drivers/staging/rdma/hfi1/init.c @@ -0,0 +1,1722 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> +#include <linux/idr.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/hrtimer.h> + +#include "hfi.h" +#include "device.h" +#include "common.h" +#include "mad.h" +#include "sdma.h" +#include "debugfs.h" +#include "verbs.h" + +#undef pr_fmt +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +/* + * min buffers we want to have per context, after driver + */ +#define HFI1_MIN_USER_CTXT_BUFCNT 7 + +#define HFI1_MIN_HDRQ_EGRBUF_CNT 2 +#define HFI1_MIN_EAGER_BUFFER_SIZE (4 * 1024) /* 4KB */ +#define HFI1_MAX_EAGER_BUFFER_SIZE (256 * 1024) /* 256KB */ + +/* + * Number of user receive contexts we are configured to use (to allow for more + * pio buffers per ctxt, etc.) Zero means use one user context per CPU. + */ +uint num_rcv_contexts; +module_param_named(num_rcv_contexts, num_rcv_contexts, uint, S_IRUGO); +MODULE_PARM_DESC( + num_rcv_contexts, "Set max number of user receive contexts to use"); + +u8 krcvqs[RXE_NUM_DATA_VL]; +int krcvqsset; +module_param_array(krcvqs, byte, &krcvqsset, S_IRUGO); +MODULE_PARM_DESC(krcvqs, "Array of the number of kernel receive queues by VL"); + +/* computed based on above array */ +unsigned n_krcvqs; + +static unsigned hfi1_rcvarr_split = 25; +module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO); +MODULE_PARM_DESC(rcvarr_split, "Percent of context's RcvArray entries used for Eager buffers"); + +static uint eager_buffer_size = (2 << 20); /* 2MB */ +module_param(eager_buffer_size, uint, S_IRUGO); +MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 2MB"); + +static uint rcvhdrcnt = 2048; /* 2x the max eager buffer count */ +module_param_named(rcvhdrcnt, rcvhdrcnt, uint, S_IRUGO); +MODULE_PARM_DESC(rcvhdrcnt, "Receive header queue count (default 2048)"); + +static uint hfi1_hdrq_entsize = 32; +module_param_named(hdrq_entsize, hfi1_hdrq_entsize, uint, S_IRUGO); +MODULE_PARM_DESC(hdrq_entsize, "Size of header queue entries: 2 - 8B, 16 - 64B (default), 32 - 128B"); + +unsigned int user_credit_return_threshold = 33; /* default is 33% */ +module_param(user_credit_return_threshold, uint, S_IRUGO); +MODULE_PARM_DESC(user_credit_return_theshold, "Credit return threshold for user send contexts, return when unreturned credits passes this many blocks (in percent of allocated blocks, 0 is off)"); + +static inline u64 encode_rcv_header_entry_size(u16); + +static struct idr hfi1_unit_table; +u32 hfi1_cpulist_count; +unsigned long *hfi1_cpulist; + +/* + * Common code for creating the receive context array. + */ +int hfi1_create_ctxts(struct hfi1_devdata *dd) +{ + unsigned i; + int ret; + int local_node_id = pcibus_to_node(dd->pcidev->bus); + + if (local_node_id < 0) + local_node_id = numa_node_id(); + dd->assigned_node_id = local_node_id; + + dd->rcd = kcalloc(dd->num_rcv_contexts, sizeof(*dd->rcd), GFP_KERNEL); + if (!dd->rcd) { + dd_dev_err(dd, + "Unable to allocate receive context array, failing\n"); + goto nomem; + } + + /* create one or more kernel contexts */ + for (i = 0; i < dd->first_user_ctxt; ++i) { + struct hfi1_pportdata *ppd; + struct hfi1_ctxtdata *rcd; + + ppd = dd->pport + (i % dd->num_pports); + rcd = hfi1_create_ctxtdata(ppd, i); + if (!rcd) { + dd_dev_err(dd, + "Unable to allocate kernel receive context, failing\n"); + goto nomem; + } + /* + * Set up the kernel context flags here and now because they + * use default values for all receive side memories. User + * contexts will be handled as they are created. + */ + rcd->flags = HFI1_CAP_KGET(MULTI_PKT_EGR) | + HFI1_CAP_KGET(NODROP_RHQ_FULL) | + HFI1_CAP_KGET(NODROP_EGR_FULL) | + HFI1_CAP_KGET(DMA_RTAIL); + rcd->seq_cnt = 1; + + rcd->sc = sc_alloc(dd, SC_ACK, rcd->rcvhdrqentsize, dd->node); + if (!rcd->sc) { + dd_dev_err(dd, + "Unable to allocate kernel send context, failing\n"); + dd->rcd[rcd->ctxt] = NULL; + hfi1_free_ctxtdata(dd, rcd); + goto nomem; + } + + ret = hfi1_init_ctxt(rcd->sc); + if (ret < 0) { + dd_dev_err(dd, + "Failed to setup kernel receive context, failing\n"); + sc_free(rcd->sc); + dd->rcd[rcd->ctxt] = NULL; + hfi1_free_ctxtdata(dd, rcd); + ret = -EFAULT; + goto bail; + } + } + + return 0; +nomem: + ret = -ENOMEM; +bail: + kfree(dd->rcd); + dd->rcd = NULL; + return ret; +} + +/* + * Common code for user and kernel context setup. + */ +struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt) +{ + struct hfi1_devdata *dd = ppd->dd; + struct hfi1_ctxtdata *rcd; + unsigned kctxt_ngroups = 0; + u32 base; + + if (dd->rcv_entries.nctxt_extra > + dd->num_rcv_contexts - dd->first_user_ctxt) + kctxt_ngroups = (dd->rcv_entries.nctxt_extra - + (dd->num_rcv_contexts - dd->first_user_ctxt)); + rcd = kzalloc(sizeof(*rcd), GFP_KERNEL); + if (rcd) { + u32 rcvtids, max_entries; + + dd_dev_info(dd, "%s: setting up context %u\n", __func__, ctxt); + + INIT_LIST_HEAD(&rcd->qp_wait_list); + rcd->ppd = ppd; + rcd->dd = dd; + rcd->cnt = 1; + rcd->ctxt = ctxt; + dd->rcd[ctxt] = rcd; + rcd->numa_id = numa_node_id(); + rcd->rcv_array_groups = dd->rcv_entries.ngroups; + + spin_lock_init(&rcd->exp_lock); + + /* + * Calculate the context's RcvArray entry starting point. + * We do this here because we have to take into account all + * the RcvArray entries that previous context would have + * taken and we have to account for any extra groups + * assigned to the kernel or user contexts. + */ + if (ctxt < dd->first_user_ctxt) { + if (ctxt < kctxt_ngroups) { + base = ctxt * (dd->rcv_entries.ngroups + 1); + rcd->rcv_array_groups++; + } else + base = kctxt_ngroups + + (ctxt * dd->rcv_entries.ngroups); + } else { + u16 ct = ctxt - dd->first_user_ctxt; + + base = ((dd->n_krcv_queues * dd->rcv_entries.ngroups) + + kctxt_ngroups); + if (ct < dd->rcv_entries.nctxt_extra) { + base += ct * (dd->rcv_entries.ngroups + 1); + rcd->rcv_array_groups++; + } else + base += dd->rcv_entries.nctxt_extra + + (ct * dd->rcv_entries.ngroups); + } + rcd->eager_base = base * dd->rcv_entries.group_size; + + /* Validate and initialize Rcv Hdr Q variables */ + if (rcvhdrcnt % HDRQ_INCREMENT) { + dd_dev_err(dd, + "ctxt%u: header queue count %d must be divisible by %d\n", + rcd->ctxt, rcvhdrcnt, HDRQ_INCREMENT); + goto bail; + } + rcd->rcvhdrq_cnt = rcvhdrcnt; + rcd->rcvhdrqentsize = hfi1_hdrq_entsize; + /* + * Simple Eager buffer allocation: we have already pre-allocated + * the number of RcvArray entry groups. Each ctxtdata structure + * holds the number of groups for that context. + * + * To follow CSR requirements and maintain cacheline alignment, + * make sure all sizes and bases are multiples of group_size. + * + * The expected entry count is what is left after assigning + * eager. + */ + max_entries = rcd->rcv_array_groups * + dd->rcv_entries.group_size; + rcvtids = ((max_entries * hfi1_rcvarr_split) / 100); + rcd->egrbufs.count = round_down(rcvtids, + dd->rcv_entries.group_size); + if (rcd->egrbufs.count > MAX_EAGER_ENTRIES) { + dd_dev_err(dd, "ctxt%u: requested too many RcvArray entries.\n", + rcd->ctxt); + rcd->egrbufs.count = MAX_EAGER_ENTRIES; + } + dd_dev_info(dd, "ctxt%u: max Eager buffer RcvArray entries: %u\n", + rcd->ctxt, rcd->egrbufs.count); + + /* + * Allocate array that will hold the eager buffer accounting + * data. + * This will allocate the maximum possible buffer count based + * on the value of the RcvArray split parameter. + * The resulting value will be rounded down to the closest + * multiple of dd->rcv_entries.group_size. + */ + rcd->egrbufs.buffers = kzalloc(sizeof(*rcd->egrbufs.buffers) * + rcd->egrbufs.count, GFP_KERNEL); + if (!rcd->egrbufs.buffers) + goto bail; + rcd->egrbufs.rcvtids = kzalloc(sizeof(*rcd->egrbufs.rcvtids) * + rcd->egrbufs.count, GFP_KERNEL); + if (!rcd->egrbufs.rcvtids) + goto bail; + rcd->egrbufs.size = eager_buffer_size; + /* + * The size of the buffers programmed into the RcvArray + * entries needs to be big enough to handle the highest + * MTU supported. + */ + if (rcd->egrbufs.size < hfi1_max_mtu) { + rcd->egrbufs.size = __roundup_pow_of_two(hfi1_max_mtu); + dd_dev_info(dd, + "ctxt%u: eager bufs size too small. Adjusting to %zu\n", + rcd->ctxt, rcd->egrbufs.size); + } + rcd->egrbufs.rcvtid_size = HFI1_MAX_EAGER_BUFFER_SIZE; + + if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */ + rcd->opstats = kzalloc(sizeof(*rcd->opstats), + GFP_KERNEL); + if (!rcd->opstats) { + dd_dev_err(dd, + "ctxt%u: Unable to allocate per ctxt stats buffer\n", + rcd->ctxt); + goto bail; + } + } + } + return rcd; +bail: + kfree(rcd->opstats); + kfree(rcd->egrbufs.rcvtids); + kfree(rcd->egrbufs.buffers); + kfree(rcd); + return NULL; +} + +/* + * Convert a receive header entry size that to the encoding used in the CSR. + * + * Return a zero if the given size is invalid. + */ +static inline u64 encode_rcv_header_entry_size(u16 size) +{ + /* there are only 3 valid receive header entry sizes */ + if (size == 2) + return 1; + if (size == 16) + return 2; + else if (size == 32) + return 4; + return 0; /* invalid */ +} + +/* + * Select the largest ccti value over all SLs to determine the intra- + * packet gap for the link. + * + * called with cca_timer_lock held (to protect access to cca_timer + * array), and rcu_read_lock() (to protect access to cc_state). + */ +void set_link_ipg(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + struct cc_state *cc_state; + int i; + u16 cce, ccti_limit, max_ccti = 0; + u16 shift, mult; + u64 src; + u32 current_egress_rate; /* Mbits /sec */ + u32 max_pkt_time; + /* + * max_pkt_time is the maximum packet egress time in units + * of the fabric clock period 1/(805 MHz). + */ + + cc_state = get_cc_state(ppd); + + if (cc_state == NULL) + /* + * This should _never_ happen - rcu_read_lock() is held, + * and set_link_ipg() should not be called if cc_state + * is NULL. + */ + return; + + for (i = 0; i < OPA_MAX_SLS; i++) { + u16 ccti = ppd->cca_timer[i].ccti; + + if (ccti > max_ccti) + max_ccti = ccti; + } + + ccti_limit = cc_state->cct.ccti_limit; + if (max_ccti > ccti_limit) + max_ccti = ccti_limit; + + cce = cc_state->cct.entries[max_ccti].entry; + shift = (cce & 0xc000) >> 14; + mult = (cce & 0x3fff); + + current_egress_rate = active_egress_rate(ppd); + + max_pkt_time = egress_cycles(ppd->ibmaxlen, current_egress_rate); + + src = (max_pkt_time >> shift) * mult; + + src &= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SMASK; + src <<= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SHIFT; + + write_csr(dd, SEND_STATIC_RATE_CONTROL, src); +} + +static enum hrtimer_restart cca_timer_fn(struct hrtimer *t) +{ + struct cca_timer *cca_timer; + struct hfi1_pportdata *ppd; + int sl; + u16 ccti, ccti_timer, ccti_min; + struct cc_state *cc_state; + + cca_timer = container_of(t, struct cca_timer, hrtimer); + ppd = cca_timer->ppd; + sl = cca_timer->sl; + + rcu_read_lock(); + + cc_state = get_cc_state(ppd); + + if (cc_state == NULL) { + rcu_read_unlock(); + return HRTIMER_NORESTART; + } + + /* + * 1) decrement ccti for SL + * 2) calculate IPG for link (set_link_ipg()) + * 3) restart timer, unless ccti is at min value + */ + + ccti_min = cc_state->cong_setting.entries[sl].ccti_min; + ccti_timer = cc_state->cong_setting.entries[sl].ccti_timer; + + spin_lock(&ppd->cca_timer_lock); + + ccti = cca_timer->ccti; + + if (ccti > ccti_min) { + cca_timer->ccti--; + set_link_ipg(ppd); + } + + spin_unlock(&ppd->cca_timer_lock); + + rcu_read_unlock(); + + if (ccti > ccti_min) { + unsigned long nsec = 1024 * ccti_timer; + /* ccti_timer is in units of 1.024 usec */ + hrtimer_forward_now(t, ns_to_ktime(nsec)); + return HRTIMER_RESTART; + } + return HRTIMER_NORESTART; +} + +/* + * Common code for initializing the physical port structure. + */ +void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd, + struct hfi1_devdata *dd, u8 hw_pidx, u8 port) +{ + int i, size; + uint default_pkey_idx; + + ppd->dd = dd; + ppd->hw_pidx = hw_pidx; + ppd->port = port; /* IB port number, not index */ + + default_pkey_idx = 1; + + ppd->pkeys[default_pkey_idx] = DEFAULT_P_KEY; + if (loopback) { + hfi1_early_err(&pdev->dev, + "Faking data partition 0x8001 in idx %u\n", + !default_pkey_idx); + ppd->pkeys[!default_pkey_idx] = 0x8001; + } + + INIT_WORK(&ppd->link_vc_work, handle_verify_cap); + INIT_WORK(&ppd->link_up_work, handle_link_up); + INIT_WORK(&ppd->link_down_work, handle_link_down); + INIT_WORK(&ppd->freeze_work, handle_freeze); + INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade); + INIT_WORK(&ppd->sma_message_work, handle_sma_message); + INIT_WORK(&ppd->link_bounce_work, handle_link_bounce); + mutex_init(&ppd->hls_lock); + spin_lock_init(&ppd->sdma_alllock); + spin_lock_init(&ppd->qsfp_info.qsfp_lock); + + ppd->sm_trap_qp = 0x0; + ppd->sa_qp = 0x1; + + ppd->hfi1_wq = NULL; + + spin_lock_init(&ppd->cca_timer_lock); + + for (i = 0; i < OPA_MAX_SLS; i++) { + hrtimer_init(&ppd->cca_timer[i].hrtimer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + ppd->cca_timer[i].ppd = ppd; + ppd->cca_timer[i].sl = i; + ppd->cca_timer[i].ccti = 0; + ppd->cca_timer[i].hrtimer.function = cca_timer_fn; + } + + ppd->cc_max_table_entries = IB_CC_TABLE_CAP_DEFAULT; + + spin_lock_init(&ppd->cc_state_lock); + spin_lock_init(&ppd->cc_log_lock); + size = sizeof(struct cc_state); + RCU_INIT_POINTER(ppd->cc_state, kzalloc(size, GFP_KERNEL)); + if (!rcu_dereference(ppd->cc_state)) + goto bail; + return; + +bail: + + hfi1_early_err(&pdev->dev, + "Congestion Control Agent disabled for port %d\n", port); +} + +/* + * Do initialization for device that is only needed on + * first detect, not on resets. + */ +static int loadtime_init(struct hfi1_devdata *dd) +{ + return 0; +} + +/** + * init_after_reset - re-initialize after a reset + * @dd: the hfi1_ib device + * + * sanity check at least some of the values after reset, and + * ensure no receive or transmit (explicitly, in case reset + * failed + */ +static int init_after_reset(struct hfi1_devdata *dd) +{ + int i; + + /* + * Ensure chip does no sends or receives, tail updates, or + * pioavail updates while we re-initialize. This is mostly + * for the driver data structures, not chip registers. + */ + for (i = 0; i < dd->num_rcv_contexts; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS | + HFI1_RCVCTRL_INTRAVAIL_DIS | + HFI1_RCVCTRL_TAILUPD_DIS, i); + pio_send_control(dd, PSC_GLOBAL_DISABLE); + for (i = 0; i < dd->num_send_contexts; i++) + sc_disable(dd->send_contexts[i].sc); + + return 0; +} + +static void enable_chip(struct hfi1_devdata *dd) +{ + u32 rcvmask; + u32 i; + + /* enable PIO send */ + pio_send_control(dd, PSC_GLOBAL_ENABLE); + + /* + * Enable kernel ctxts' receive and receive interrupt. + * Other ctxts done as user opens and initializes them. + */ + rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB; + for (i = 0; i < dd->first_user_ctxt; ++i) { + rcvmask |= HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, DMA_RTAIL) ? + HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS; + if (!HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, MULTI_PKT_EGR)) + rcvmask |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB; + if (HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, NODROP_RHQ_FULL)) + rcvmask |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB; + if (HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, NODROP_EGR_FULL)) + rcvmask |= HFI1_RCVCTRL_NO_EGR_DROP_ENB; + hfi1_rcvctrl(dd, rcvmask, i); + sc_enable(dd->rcd[i]->sc); + } +} + +/** + * create_workqueues - create per port workqueues + * @dd: the hfi1_ib device + */ +static int create_workqueues(struct hfi1_devdata *dd) +{ + int pidx; + struct hfi1_pportdata *ppd; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (!ppd->hfi1_wq) { + char wq_name[8]; /* 3 + 2 + 1 + 1 + 1 */ + + snprintf(wq_name, sizeof(wq_name), "hfi%d_%d", + dd->unit, pidx); + ppd->hfi1_wq = + create_singlethread_workqueue(wq_name); + if (!ppd->hfi1_wq) + goto wq_error; + } + } + return 0; +wq_error: + pr_err("create_singlethread_workqueue failed for port %d\n", + pidx + 1); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->hfi1_wq) { + destroy_workqueue(ppd->hfi1_wq); + ppd->hfi1_wq = NULL; + } + } + return -ENOMEM; +} + +/** + * hfi1_init - do the actual initialization sequence on the chip + * @dd: the hfi1_ib device + * @reinit: re-initializing, so don't allocate new memory + * + * Do the actual initialization sequence on the chip. This is done + * both from the init routine called from the PCI infrastructure, and + * when we reset the chip, or detect that it was reset internally, + * or it's administratively re-enabled. + * + * Memory allocation here and in called routines is only done in + * the first case (reinit == 0). We have to be careful, because even + * without memory allocation, we need to re-write all the chip registers + * TIDs, etc. after the reset or enable has completed. + */ +int hfi1_init(struct hfi1_devdata *dd, int reinit) +{ + int ret = 0, pidx, lastfail = 0; + unsigned i, len; + struct hfi1_ctxtdata *rcd; + struct hfi1_pportdata *ppd; + + /* Set up recv low level handlers */ + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_EXPECTED] = + kdeth_process_expected; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_EAGER] = + kdeth_process_eager; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_IB] = process_receive_ib; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_ERROR] = + process_receive_error; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_BYPASS] = + process_receive_bypass; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID5] = + process_receive_invalid; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID6] = + process_receive_invalid; + dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID7] = + process_receive_invalid; + dd->rhf_rcv_function_map = dd->normal_rhf_rcv_functions; + + /* Set up send low level handlers */ + dd->process_pio_send = hfi1_verbs_send_pio; + dd->process_dma_send = hfi1_verbs_send_dma; + dd->pio_inline_send = pio_copy; + + if (is_a0(dd)) { + atomic_set(&dd->drop_packet, DROP_PACKET_ON); + dd->do_drop = 1; + } else { + atomic_set(&dd->drop_packet, DROP_PACKET_OFF); + dd->do_drop = 0; + } + + /* make sure the link is not "up" */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + ppd->linkup = 0; + } + + if (reinit) + ret = init_after_reset(dd); + else + ret = loadtime_init(dd); + if (ret) + goto done; + + /* dd->rcd can be NULL if early initialization failed */ + for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { + /* + * Set up the (kernel) rcvhdr queue and egr TIDs. If doing + * re-init, the simplest way to handle this is to free + * existing, and re-allocate. + * Need to re-create rest of ctxt 0 ctxtdata as well. + */ + rcd = dd->rcd[i]; + if (!rcd) + continue; + + rcd->do_interrupt = &handle_receive_interrupt; + + lastfail = hfi1_create_rcvhdrq(dd, rcd); + if (!lastfail) + lastfail = hfi1_setup_eagerbufs(rcd); + if (lastfail) + dd_dev_err(dd, + "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n"); + } + if (lastfail) + ret = lastfail; + + /* Allocate enough memory for user event notification. */ + len = ALIGN(dd->chip_rcv_contexts * HFI1_MAX_SHARED_CTXTS * + sizeof(*dd->events), PAGE_SIZE); + dd->events = vmalloc_user(len); + if (!dd->events) + dd_dev_err(dd, "Failed to allocate user events page\n"); + /* + * Allocate a page for device and port status. + * Page will be shared amongst all user processes. + */ + dd->status = vmalloc_user(PAGE_SIZE); + if (!dd->status) + dd_dev_err(dd, "Failed to allocate dev status page\n"); + else + dd->freezelen = PAGE_SIZE - (sizeof(*dd->status) - + sizeof(dd->status->freezemsg)); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (dd->status) + /* Currently, we only have one port */ + ppd->statusp = &dd->status->port; + + set_mtu(ppd); + } + + /* enable chip even if we have an error, so we can debug cause */ + enable_chip(dd); + + ret = hfi1_cq_init(dd); +done: + /* + * Set status even if port serdes is not initialized + * so that diags will work. + */ + if (dd->status) + dd->status->dev |= HFI1_STATUS_CHIP_PRESENT | + HFI1_STATUS_INITTED; + if (!ret) { + /* enable all interrupts from the chip */ + set_intr_state(dd, 1); + + /* chip is OK for user apps; mark it as initialized */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + /* initialize the qsfp if it exists + * Requires interrupts to be enabled so we are notified + * when the QSFP completes reset, and has + * to be done before bringing up the SERDES + */ + init_qsfp(ppd); + + /* start the serdes - must be after interrupts are + enabled so we are notified when the link goes up */ + lastfail = bringup_serdes(ppd); + if (lastfail) + dd_dev_info(dd, + "Failed to bring up port %u\n", + ppd->port); + + /* + * Set status even if port serdes is not initialized + * so that diags will work. + */ + if (ppd->statusp) + *ppd->statusp |= HFI1_STATUS_CHIP_PRESENT | + HFI1_STATUS_INITTED; + if (!ppd->link_speed_enabled) + continue; + } + } + + /* if ret is non-zero, we probably should do some cleanup here... */ + return ret; +} + +static inline struct hfi1_devdata *__hfi1_lookup(int unit) +{ + return idr_find(&hfi1_unit_table, unit); +} + +struct hfi1_devdata *hfi1_lookup(int unit) +{ + struct hfi1_devdata *dd; + unsigned long flags; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + dd = __hfi1_lookup(unit); + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + + return dd; +} + +/* + * Stop the timers during unit shutdown, or after an error late + * in initialization. + */ +static void stop_timers(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int pidx; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->led_override_timer.data) { + del_timer_sync(&ppd->led_override_timer); + atomic_set(&ppd->led_override_timer_active, 0); + } + } +} + +/** + * shutdown_device - shut down a device + * @dd: the hfi1_ib device + * + * This is called to make the device quiet when we are about to + * unload the driver, and also when the device is administratively + * disabled. It does not free any data structures. + * Everything it does has to be setup again by hfi1_init(dd, 1) + */ +static void shutdown_device(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + unsigned pidx; + int i; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + ppd->linkup = 0; + if (ppd->statusp) + *ppd->statusp &= ~(HFI1_STATUS_IB_CONF | + HFI1_STATUS_IB_READY); + } + dd->flags &= ~HFI1_INITTED; + + /* mask interrupts, but not errors */ + set_intr_state(dd, 0); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + for (i = 0; i < dd->num_rcv_contexts; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_TAILUPD_DIS | + HFI1_RCVCTRL_CTXT_DIS | + HFI1_RCVCTRL_INTRAVAIL_DIS | + HFI1_RCVCTRL_PKEY_DIS | + HFI1_RCVCTRL_ONE_PKT_EGR_DIS, i); + /* + * Gracefully stop all sends allowing any in progress to + * trickle out first. + */ + for (i = 0; i < dd->num_send_contexts; i++) + sc_flush(dd->send_contexts[i].sc); + } + + /* + * Enough for anything that's going to trickle out to have actually + * done so. + */ + udelay(20); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + /* disable all contexts */ + for (i = 0; i < dd->num_send_contexts; i++) + sc_disable(dd->send_contexts[i].sc); + /* disable the send device */ + pio_send_control(dd, PSC_GLOBAL_DISABLE); + + /* + * Clear SerdesEnable. + * We can't count on interrupts since we are stopping. + */ + hfi1_quiet_serdes(ppd); + + if (ppd->hfi1_wq) { + destroy_workqueue(ppd->hfi1_wq); + ppd->hfi1_wq = NULL; + } + } + sdma_exit(dd); +} + +/** + * hfi1_free_ctxtdata - free a context's allocated data + * @dd: the hfi1_ib device + * @rcd: the ctxtdata structure + * + * free up any allocated data for a context + * This should not touch anything that would affect a simultaneous + * re-allocation of context data, because it is called after hfi1_mutex + * is released (and can be called from reinit as well). + * It should never change any chip state, or global driver state. + */ +void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) +{ + unsigned e; + + if (!rcd) + return; + + if (rcd->rcvhdrq) { + dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size, + rcd->rcvhdrq, rcd->rcvhdrq_phys); + rcd->rcvhdrq = NULL; + if (rcd->rcvhdrtail_kvaddr) { + dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, + (void *)rcd->rcvhdrtail_kvaddr, + rcd->rcvhdrqtailaddr_phys); + rcd->rcvhdrtail_kvaddr = NULL; + } + } + + /* all the RcvArray entries should have been cleared by now */ + kfree(rcd->egrbufs.rcvtids); + + for (e = 0; e < rcd->egrbufs.alloced; e++) { + if (rcd->egrbufs.buffers[e].phys) + dma_free_coherent(&dd->pcidev->dev, + rcd->egrbufs.buffers[e].len, + rcd->egrbufs.buffers[e].addr, + rcd->egrbufs.buffers[e].phys); + } + kfree(rcd->egrbufs.buffers); + + sc_free(rcd->sc); + vfree(rcd->physshadow); + vfree(rcd->tid_pg_list); + vfree(rcd->user_event_mask); + vfree(rcd->subctxt_uregbase); + vfree(rcd->subctxt_rcvegrbuf); + vfree(rcd->subctxt_rcvhdr_base); + kfree(rcd->tidusemap); + kfree(rcd->opstats); + kfree(rcd); +} + +void hfi1_free_devdata(struct hfi1_devdata *dd) +{ + unsigned long flags; + + spin_lock_irqsave(&hfi1_devs_lock, flags); + idr_remove(&hfi1_unit_table, dd->unit); + list_del(&dd->list); + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + hfi1_dbg_ibdev_exit(&dd->verbs_dev); + rcu_barrier(); /* wait for rcu callbacks to complete */ + free_percpu(dd->int_counter); + free_percpu(dd->rcv_limit); + ib_dealloc_device(&dd->verbs_dev.ibdev); +} + +/* + * Allocate our primary per-unit data structure. Must be done via verbs + * allocator, because the verbs cleanup process both does cleanup and + * free of the data structure. + * "extra" is for chip-specific data. + * + * Use the idr mechanism to get a unit number for this unit. + */ +struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra) +{ + unsigned long flags; + struct hfi1_devdata *dd; + int ret; + + dd = (struct hfi1_devdata *)ib_alloc_device(sizeof(*dd) + extra); + if (!dd) + return ERR_PTR(-ENOMEM); + /* extra is * number of ports */ + dd->num_pports = extra / sizeof(struct hfi1_pportdata); + dd->pport = (struct hfi1_pportdata *)(dd + 1); + + INIT_LIST_HEAD(&dd->list); + dd->node = dev_to_node(&pdev->dev); + if (dd->node < 0) + dd->node = 0; + idr_preload(GFP_KERNEL); + spin_lock_irqsave(&hfi1_devs_lock, flags); + + ret = idr_alloc(&hfi1_unit_table, dd, 0, 0, GFP_NOWAIT); + if (ret >= 0) { + dd->unit = ret; + list_add(&dd->list, &hfi1_dev_list); + } + + spin_unlock_irqrestore(&hfi1_devs_lock, flags); + idr_preload_end(); + + if (ret < 0) { + hfi1_early_err(&pdev->dev, + "Could not allocate unit ID: error %d\n", -ret); + goto bail; + } + /* + * Initialize all locks for the device. This needs to be as early as + * possible so locks are usable. + */ + spin_lock_init(&dd->sc_lock); + spin_lock_init(&dd->sendctrl_lock); + spin_lock_init(&dd->rcvctrl_lock); + spin_lock_init(&dd->uctxt_lock); + spin_lock_init(&dd->hfi1_diag_trans_lock); + spin_lock_init(&dd->sc_init_lock); + spin_lock_init(&dd->dc8051_lock); + spin_lock_init(&dd->dc8051_memlock); + mutex_init(&dd->qsfp_i2c_mutex); + seqlock_init(&dd->sc2vl_lock); + spin_lock_init(&dd->sde_map_lock); + init_waitqueue_head(&dd->event_queue); + + dd->int_counter = alloc_percpu(u64); + if (!dd->int_counter) { + ret = -ENOMEM; + hfi1_early_err(&pdev->dev, + "Could not allocate per-cpu int_counter\n"); + goto bail; + } + + dd->rcv_limit = alloc_percpu(u64); + if (!dd->rcv_limit) { + ret = -ENOMEM; + hfi1_early_err(&pdev->dev, + "Could not allocate per-cpu rcv_limit\n"); + goto bail; + } + + if (!hfi1_cpulist_count) { + u32 count = num_online_cpus(); + + hfi1_cpulist = kzalloc(BITS_TO_LONGS(count) * + sizeof(long), GFP_KERNEL); + if (hfi1_cpulist) + hfi1_cpulist_count = count; + else + hfi1_early_err( + &pdev->dev, + "Could not alloc cpulist info, cpu affinity might be wrong\n"); + } + hfi1_dbg_ibdev_init(&dd->verbs_dev); + return dd; + +bail: + if (!list_empty(&dd->list)) + list_del_init(&dd->list); + ib_dealloc_device(&dd->verbs_dev.ibdev); + return ERR_PTR(ret); +} + +/* + * Called from freeze mode handlers, and from PCI error + * reporting code. Should be paranoid about state of + * system and data structures. + */ +void hfi1_disable_after_error(struct hfi1_devdata *dd) +{ + if (dd->flags & HFI1_INITTED) { + u32 pidx; + + dd->flags &= ~HFI1_INITTED; + if (dd->pport) + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + struct hfi1_pportdata *ppd; + + ppd = dd->pport + pidx; + if (dd->flags & HFI1_PRESENT) + set_link_state(ppd, HLS_DN_DISABLE); + + if (ppd->statusp) + *ppd->statusp &= ~HFI1_STATUS_IB_READY; + } + } + + /* + * Mark as having had an error for driver, and also + * for /sys and status word mapped to user programs. + * This marks unit as not usable, until reset. + */ + if (dd->status) + dd->status->dev |= HFI1_STATUS_HWERROR; +} + +static void remove_one(struct pci_dev *); +static int init_one(struct pci_dev *, const struct pci_device_id *); + +#define DRIVER_LOAD_MSG "Intel " DRIVER_NAME " loaded: " +#define PFX DRIVER_NAME ": " + +static const struct pci_device_id hfi1_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL1) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, hfi1_pci_tbl); + +static struct pci_driver hfi1_pci_driver = { + .name = DRIVER_NAME, + .probe = init_one, + .remove = remove_one, + .id_table = hfi1_pci_tbl, + .err_handler = &hfi1_pci_err_handler, +}; + +static void __init compute_krcvqs(void) +{ + int i; + + for (i = 0; i < krcvqsset; i++) + n_krcvqs += krcvqs[i]; +} + +/* + * Do all the generic driver unit- and chip-independent memory + * allocation and initialization. + */ +static int __init hfi1_mod_init(void) +{ + int ret; + + ret = dev_init(); + if (ret) + goto bail; + + /* validate max MTU before any devices start */ + if (!valid_opa_max_mtu(hfi1_max_mtu)) { + pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n", + hfi1_max_mtu, HFI1_DEFAULT_MAX_MTU); + hfi1_max_mtu = HFI1_DEFAULT_MAX_MTU; + } + /* valid CUs run from 1-128 in powers of 2 */ + if (hfi1_cu > 128 || !is_power_of_2(hfi1_cu)) + hfi1_cu = 1; + /* valid credit return threshold is 0-100, variable is unsigned */ + if (user_credit_return_threshold > 100) + user_credit_return_threshold = 100; + + compute_krcvqs(); + /* sanitize receive interrupt count, time must wait until after + the hardware type is known */ + if (rcv_intr_count > RCV_HDR_HEAD_COUNTER_MASK) + rcv_intr_count = RCV_HDR_HEAD_COUNTER_MASK; + /* reject invalid combinations */ + if (rcv_intr_count == 0 && rcv_intr_timeout == 0) { + pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n"); + rcv_intr_count = 1; + } + if (rcv_intr_count > 1 && rcv_intr_timeout == 0) { + /* + * Avoid indefinite packet delivery by requiring a timeout + * if count is > 1. + */ + pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n"); + rcv_intr_timeout = 1; + } + if (rcv_intr_dynamic && !(rcv_intr_count > 1 && rcv_intr_timeout > 0)) { + /* + * The dynamic algorithm expects a non-zero timeout + * and a count > 1. + */ + pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n"); + rcv_intr_dynamic = 0; + } + + /* sanitize link CRC options */ + link_crc_mask &= SUPPORTED_CRCS; + + /* + * These must be called before the driver is registered with + * the PCI subsystem. + */ + idr_init(&hfi1_unit_table); + + hfi1_dbg_init(); + ret = pci_register_driver(&hfi1_pci_driver); + if (ret < 0) { + pr_err("Unable to register driver: error %d\n", -ret); + goto bail_dev; + } + goto bail; /* all OK */ + +bail_dev: + hfi1_dbg_exit(); + idr_destroy(&hfi1_unit_table); + dev_cleanup(); +bail: + return ret; +} + +module_init(hfi1_mod_init); + +/* + * Do the non-unit driver cleanup, memory free, etc. at unload. + */ +static void __exit hfi1_mod_cleanup(void) +{ + pci_unregister_driver(&hfi1_pci_driver); + hfi1_dbg_exit(); + hfi1_cpulist_count = 0; + kfree(hfi1_cpulist); + + idr_destroy(&hfi1_unit_table); + dispose_firmware(); /* asymmetric with obtain_firmware() */ + dev_cleanup(); +} + +module_exit(hfi1_mod_cleanup); + +/* this can only be called after a successful initialization */ +static void cleanup_device_data(struct hfi1_devdata *dd) +{ + int ctxt; + int pidx; + struct hfi1_ctxtdata **tmp; + unsigned long flags; + + /* users can't do anything more with chip */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + struct hfi1_pportdata *ppd = &dd->pport[pidx]; + struct cc_state *cc_state; + int i; + + if (ppd->statusp) + *ppd->statusp &= ~HFI1_STATUS_CHIP_PRESENT; + + for (i = 0; i < OPA_MAX_SLS; i++) + hrtimer_cancel(&ppd->cca_timer[i].hrtimer); + + spin_lock(&ppd->cc_state_lock); + cc_state = get_cc_state(ppd); + rcu_assign_pointer(ppd->cc_state, NULL); + spin_unlock(&ppd->cc_state_lock); + + if (cc_state) + call_rcu(&cc_state->rcu, cc_state_reclaim); + } + + free_credit_return(dd); + + /* + * Free any resources still in use (usually just kernel contexts) + * at unload; we do for ctxtcnt, because that's what we allocate. + * We acquire lock to be really paranoid that rcd isn't being + * accessed from some interrupt-related code (that should not happen, + * but best to be sure). + */ + spin_lock_irqsave(&dd->uctxt_lock, flags); + tmp = dd->rcd; + dd->rcd = NULL; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + for (ctxt = 0; tmp && ctxt < dd->num_rcv_contexts; ctxt++) { + struct hfi1_ctxtdata *rcd = tmp[ctxt]; + + tmp[ctxt] = NULL; /* debugging paranoia */ + if (rcd) { + hfi1_clear_tids(rcd); + hfi1_free_ctxtdata(dd, rcd); + } + } + kfree(tmp); + /* must follow rcv context free - need to remove rcv's hooks */ + for (ctxt = 0; ctxt < dd->num_send_contexts; ctxt++) + sc_free(dd->send_contexts[ctxt].sc); + dd->num_send_contexts = 0; + kfree(dd->send_contexts); + dd->send_contexts = NULL; + kfree(dd->boardname); + vfree(dd->events); + vfree(dd->status); + hfi1_cq_exit(dd); +} + +/* + * Clean up on unit shutdown, or error during unit load after + * successful initialization. + */ +static void postinit_cleanup(struct hfi1_devdata *dd) +{ + hfi1_start_cleanup(dd); + + hfi1_pcie_ddcleanup(dd); + hfi1_pcie_cleanup(dd->pcidev); + + cleanup_device_data(dd); + + hfi1_free_devdata(dd); +} + +static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret = 0, j, pidx, initfail; + struct hfi1_devdata *dd = NULL; + + /* First, lock the non-writable module parameters */ + HFI1_CAP_LOCK(); + + /* Validate some global module parameters */ + if (rcvhdrcnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) { + hfi1_early_err(&pdev->dev, "Header queue count too small\n"); + ret = -EINVAL; + goto bail; + } + /* use the encoding function as a sanitization check */ + if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) { + hfi1_early_err(&pdev->dev, "Invalid HdrQ Entry size %u\n", + hfi1_hdrq_entsize); + goto bail; + } + + /* The receive eager buffer size must be set before the receive + * contexts are created. + * + * Set the eager buffer size. Validate that it falls in a range + * allowed by the hardware - all powers of 2 between the min and + * max. The maximum valid MTU is within the eager buffer range + * so we do not need to cap the max_mtu by an eager buffer size + * setting. + */ + if (eager_buffer_size) { + if (!is_power_of_2(eager_buffer_size)) + eager_buffer_size = + roundup_pow_of_two(eager_buffer_size); + eager_buffer_size = + clamp_val(eager_buffer_size, + MIN_EAGER_BUFFER * 8, + MAX_EAGER_BUFFER_TOTAL); + hfi1_early_info(&pdev->dev, "Eager buffer size %u\n", + eager_buffer_size); + } else { + hfi1_early_err(&pdev->dev, "Invalid Eager buffer size of 0\n"); + ret = -EINVAL; + goto bail; + } + + /* restrict value of hfi1_rcvarr_split */ + hfi1_rcvarr_split = clamp_val(hfi1_rcvarr_split, 0, 100); + + ret = hfi1_pcie_init(pdev, ent); + if (ret) + goto bail; + + /* + * Do device-specific initialization, function table setup, dd + * allocation, etc. + */ + switch (ent->device) { + case PCI_DEVICE_ID_INTEL0: + case PCI_DEVICE_ID_INTEL1: + dd = hfi1_init_dd(pdev, ent); + break; + default: + hfi1_early_err(&pdev->dev, + "Failing on unknown Intel deviceid 0x%x\n", + ent->device); + ret = -ENODEV; + } + + if (IS_ERR(dd)) + ret = PTR_ERR(dd); + if (ret) + goto clean_bail; /* error already printed */ + + ret = create_workqueues(dd); + if (ret) + goto clean_bail; + + /* do the generic initialization */ + initfail = hfi1_init(dd, 0); + + ret = hfi1_register_ib_device(dd); + + /* + * Now ready for use. this should be cleared whenever we + * detect a reset, or initiate one. If earlier failure, + * we still create devices, so diags, etc. can be used + * to determine cause of problem. + */ + if (!initfail && !ret) + dd->flags |= HFI1_INITTED; + + j = hfi1_device_create(dd); + if (j) + dd_dev_err(dd, "Failed to create /dev devices: %d\n", -j); + + if (initfail || ret) { + stop_timers(dd); + flush_workqueue(ib_wq); + for (pidx = 0; pidx < dd->num_pports; ++pidx) + hfi1_quiet_serdes(dd->pport + pidx); + if (!j) + hfi1_device_remove(dd); + if (!ret) + hfi1_unregister_ib_device(dd); + postinit_cleanup(dd); + if (initfail) + ret = initfail; + goto bail; /* everything already cleaned */ + } + + sdma_start(dd); + + return 0; + +clean_bail: + hfi1_pcie_cleanup(pdev); +bail: + return ret; +} + +static void remove_one(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + /* unregister from IB core */ + hfi1_unregister_ib_device(dd); + + /* + * Disable the IB link, disable interrupts on the device, + * clear dma engines, etc. + */ + shutdown_device(dd); + + stop_timers(dd); + + /* wait until all of our (qsfp) queue_work() calls complete */ + flush_workqueue(ib_wq); + + hfi1_device_remove(dd); + + postinit_cleanup(dd); +} + +/** + * hfi1_create_rcvhdrq - create a receive header queue + * @dd: the hfi1_ib device + * @rcd: the context data + * + * This must be contiguous memory (from an i/o perspective), and must be + * DMA'able (which means for some systems, it will go through an IOMMU, + * or be forced into a low address range). + */ +int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) +{ + unsigned amt; + u64 reg; + + if (!rcd->rcvhdrq) { + dma_addr_t phys_hdrqtail; + gfp_t gfp_flags; + + /* + * rcvhdrqentsize is in DWs, so we have to convert to bytes + * (* sizeof(u32)). + */ + amt = ALIGN(rcd->rcvhdrq_cnt * rcd->rcvhdrqentsize * + sizeof(u32), PAGE_SIZE); + + gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ? + GFP_USER : GFP_KERNEL; + rcd->rcvhdrq = dma_zalloc_coherent( + &dd->pcidev->dev, amt, &rcd->rcvhdrq_phys, + gfp_flags | __GFP_COMP); + + if (!rcd->rcvhdrq) { + dd_dev_err(dd, + "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n", + amt, rcd->ctxt); + goto bail; + } + + /* Event mask is per device now and is in hfi1_devdata */ + /*if (rcd->ctxt >= dd->first_user_ctxt) { + rcd->user_event_mask = vmalloc_user(PAGE_SIZE); + if (!rcd->user_event_mask) + goto bail_free_hdrq; + }*/ + + if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) { + rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent( + &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, + gfp_flags); + if (!rcd->rcvhdrtail_kvaddr) + goto bail_free; + rcd->rcvhdrqtailaddr_phys = phys_hdrqtail; + } + + rcd->rcvhdrq_size = amt; + } + /* + * These values are per-context: + * RcvHdrCnt + * RcvHdrEntSize + * RcvHdrSize + */ + reg = ((u64)(rcd->rcvhdrq_cnt >> HDRQ_SIZE_SHIFT) + & RCV_HDR_CNT_CNT_MASK) + << RCV_HDR_CNT_CNT_SHIFT; + write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_CNT, reg); + reg = (encode_rcv_header_entry_size(rcd->rcvhdrqentsize) + & RCV_HDR_ENT_SIZE_ENT_SIZE_MASK) + << RCV_HDR_ENT_SIZE_ENT_SIZE_SHIFT; + write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_ENT_SIZE, reg); + reg = (dd->rcvhdrsize & RCV_HDR_SIZE_HDR_SIZE_MASK) + << RCV_HDR_SIZE_HDR_SIZE_SHIFT; + write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_SIZE, reg); + return 0; + +bail_free: + dd_dev_err(dd, + "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n", + rcd->ctxt); + vfree(rcd->user_event_mask); + rcd->user_event_mask = NULL; + dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq, + rcd->rcvhdrq_phys); + rcd->rcvhdrq = NULL; +bail: + return -ENOMEM; +} + +/** + * allocate eager buffers, both kernel and user contexts. + * @rcd: the context we are setting up. + * + * Allocate the eager TID buffers and program them into hip. + * They are no longer completely contiguous, we do multiple allocation + * calls. Otherwise we get the OOM code involved, by asking for too + * much per call, with disastrous results on some kernels. + */ +int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd) +{ + struct hfi1_devdata *dd = rcd->dd; + u32 max_entries, egrtop, alloced_bytes = 0, idx = 0; + gfp_t gfp_flags; + u16 order; + int ret = 0; + u16 round_mtu = roundup_pow_of_two(hfi1_max_mtu); + + /* + * GFP_USER, but without GFP_FS, so buffer cache can be + * coalesced (we hope); otherwise, even at order 4, + * heavy filesystem activity makes these fail, and we can + * use compound pages. + */ + gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP; + + /* + * The minimum size of the eager buffers is a groups of MTU-sized + * buffers. + * The global eager_buffer_size parameter is checked against the + * theoretical lower limit of the value. Here, we check against the + * MTU. + */ + if (rcd->egrbufs.size < (round_mtu * dd->rcv_entries.group_size)) + rcd->egrbufs.size = round_mtu * dd->rcv_entries.group_size; + /* + * If using one-pkt-per-egr-buffer, lower the eager buffer + * size to the max MTU (page-aligned). + */ + if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) + rcd->egrbufs.rcvtid_size = round_mtu; + + /* + * Eager buffers sizes of 1MB or less require smaller TID sizes + * to satisfy the "multiple of 8 RcvArray entries" requirement. + */ + if (rcd->egrbufs.size <= (1 << 20)) + rcd->egrbufs.rcvtid_size = max((unsigned long)round_mtu, + rounddown_pow_of_two(rcd->egrbufs.size / 8)); + + while (alloced_bytes < rcd->egrbufs.size && + rcd->egrbufs.alloced < rcd->egrbufs.count) { + rcd->egrbufs.buffers[idx].addr = + dma_zalloc_coherent(&dd->pcidev->dev, + rcd->egrbufs.rcvtid_size, + &rcd->egrbufs.buffers[idx].phys, + gfp_flags); + if (rcd->egrbufs.buffers[idx].addr) { + rcd->egrbufs.buffers[idx].len = + rcd->egrbufs.rcvtid_size; + rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].addr = + rcd->egrbufs.buffers[idx].addr; + rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].phys = + rcd->egrbufs.buffers[idx].phys; + rcd->egrbufs.alloced++; + alloced_bytes += rcd->egrbufs.rcvtid_size; + idx++; + } else { + u32 new_size, i, j; + u64 offset = 0; + + /* + * Fail the eager buffer allocation if: + * - we are already using the lowest acceptable size + * - we are using one-pkt-per-egr-buffer (this implies + * that we are accepting only one size) + */ + if (rcd->egrbufs.rcvtid_size == round_mtu || + !HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) { + dd_dev_err(dd, "ctxt%u: Failed to allocate eager buffers\n", + rcd->ctxt); + goto bail_rcvegrbuf_phys; + } + + new_size = rcd->egrbufs.rcvtid_size / 2; + + /* + * If the first attempt to allocate memory failed, don't + * fail everything but continue with the next lower + * size. + */ + if (idx == 0) { + rcd->egrbufs.rcvtid_size = new_size; + continue; + } + + /* + * Re-partition already allocated buffers to a smaller + * size. + */ + rcd->egrbufs.alloced = 0; + for (i = 0, j = 0, offset = 0; j < idx; i++) { + if (i >= rcd->egrbufs.count) + break; + rcd->egrbufs.rcvtids[i].phys = + rcd->egrbufs.buffers[j].phys + offset; + rcd->egrbufs.rcvtids[i].addr = + rcd->egrbufs.buffers[j].addr + offset; + rcd->egrbufs.alloced++; + if ((rcd->egrbufs.buffers[j].phys + offset + + new_size) == + (rcd->egrbufs.buffers[j].phys + + rcd->egrbufs.buffers[j].len)) { + j++; + offset = 0; + } else + offset += new_size; + } + rcd->egrbufs.rcvtid_size = new_size; + } + } + rcd->egrbufs.numbufs = idx; + rcd->egrbufs.size = alloced_bytes; + + dd_dev_info(dd, "ctxt%u: Alloced %u rcv tid entries @ %uKB, total %zuKB\n", + rcd->ctxt, rcd->egrbufs.alloced, rcd->egrbufs.rcvtid_size, + rcd->egrbufs.size); + + /* + * Set the contexts rcv array head update threshold to the closest + * power of 2 (so we can use a mask instead of modulo) below half + * the allocated entries. + */ + rcd->egrbufs.threshold = + rounddown_pow_of_two(rcd->egrbufs.alloced / 2); + /* + * Compute the expected RcvArray entry base. This is done after + * allocating the eager buffers in order to maximize the + * expected RcvArray entries for the context. + */ + max_entries = rcd->rcv_array_groups * dd->rcv_entries.group_size; + egrtop = roundup(rcd->egrbufs.alloced, dd->rcv_entries.group_size); + rcd->expected_count = max_entries - egrtop; + if (rcd->expected_count > MAX_TID_PAIR_ENTRIES * 2) + rcd->expected_count = MAX_TID_PAIR_ENTRIES * 2; + + rcd->expected_base = rcd->eager_base + egrtop; + dd_dev_info(dd, "ctxt%u: eager:%u, exp:%u, egrbase:%u, expbase:%u\n", + rcd->ctxt, rcd->egrbufs.alloced, rcd->expected_count, + rcd->eager_base, rcd->expected_base); + + if (!hfi1_rcvbuf_validate(rcd->egrbufs.rcvtid_size, PT_EAGER, &order)) { + dd_dev_err(dd, "ctxt%u: current Eager buffer size is invalid %u\n", + rcd->ctxt, rcd->egrbufs.rcvtid_size); + ret = -EINVAL; + goto bail; + } + + for (idx = 0; idx < rcd->egrbufs.alloced; idx++) { + hfi1_put_tid(dd, rcd->eager_base + idx, PT_EAGER, + rcd->egrbufs.rcvtids[idx].phys, order); + cond_resched(); + } + goto bail; + +bail_rcvegrbuf_phys: + for (idx = 0; idx < rcd->egrbufs.alloced && + rcd->egrbufs.buffers[idx].addr; + idx++) { + dma_free_coherent(&dd->pcidev->dev, + rcd->egrbufs.buffers[idx].len, + rcd->egrbufs.buffers[idx].addr, + rcd->egrbufs.buffers[idx].phys); + rcd->egrbufs.buffers[idx].addr = NULL; + rcd->egrbufs.buffers[idx].phys = 0; + rcd->egrbufs.buffers[idx].len = 0; + } +bail: + return ret; +} diff --git a/drivers/staging/rdma/hfi1/intr.c b/drivers/staging/rdma/hfi1/intr.c new file mode 100644 index 000000000000..426582b9ab65 --- /dev/null +++ b/drivers/staging/rdma/hfi1/intr.c @@ -0,0 +1,207 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/pci.h> +#include <linux/delay.h> + +#include "hfi.h" +#include "common.h" +#include "sdma.h" + +/** + * format_hwmsg - format a single hwerror message + * @msg message buffer + * @msgl length of message buffer + * @hwmsg message to add to message buffer + */ +static void format_hwmsg(char *msg, size_t msgl, const char *hwmsg) +{ + strlcat(msg, "[", msgl); + strlcat(msg, hwmsg, msgl); + strlcat(msg, "]", msgl); +} + +/** + * hfi1_format_hwerrors - format hardware error messages for display + * @hwerrs hardware errors bit vector + * @hwerrmsgs hardware error descriptions + * @nhwerrmsgs number of hwerrmsgs + * @msg message buffer + * @msgl message buffer length + */ +void hfi1_format_hwerrors(u64 hwerrs, const struct hfi1_hwerror_msgs *hwerrmsgs, + size_t nhwerrmsgs, char *msg, size_t msgl) +{ + int i; + + for (i = 0; i < nhwerrmsgs; i++) + if (hwerrs & hwerrmsgs[i].mask) + format_hwmsg(msg, msgl, hwerrmsgs[i].msg); +} + +static void signal_ib_event(struct hfi1_pportdata *ppd, enum ib_event_type ev) +{ + struct ib_event event; + struct hfi1_devdata *dd = ppd->dd; + + /* + * Only call ib_dispatch_event() if the IB device has been + * registered. HFI1_INITED is set iff the driver has successfully + * registered with the IB core. + */ + if (!(dd->flags & HFI1_INITTED)) + return; + event.device = &dd->verbs_dev.ibdev; + event.element.port_num = ppd->port; + event.event = ev; + ib_dispatch_event(&event); +} + +/* + * Handle a linkup or link down notification. + * This is called outside an interrupt. + */ +void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup) +{ + struct hfi1_pportdata *ppd = &dd->pport[0]; + enum ib_event_type ev; + + if (!(ppd->linkup ^ !!linkup)) + return; /* no change, nothing to do */ + + if (linkup) { + /* + * Quick linkup and all link up on the simulator does not + * trigger or implement: + * - VerifyCap interrupt + * - VerifyCap frames + * But rather moves directly to LinkUp. + * + * Do the work of the VerifyCap interrupt handler, + * handle_verify_cap(), but do not try moving the state to + * LinkUp as we are already there. + * + * NOTE: This uses this device's vAU, vCU, and vl15_init for + * the remote values. Both sides must be using the values. + */ + if (quick_linkup + || dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + set_up_vl15(dd, dd->vau, dd->vl15_init); + assign_remote_cm_au_table(dd, dd->vcu); + ppd->neighbor_guid = + read_csr(dd, + DC_DC8051_STS_REMOTE_GUID); + ppd->neighbor_type = + read_csr(dd, DC_DC8051_STS_REMOTE_NODE_TYPE) & + DC_DC8051_STS_REMOTE_NODE_TYPE_VAL_MASK; + ppd->neighbor_port_number = + read_csr(dd, DC_DC8051_STS_REMOTE_PORT_NO) & + DC_DC8051_STS_REMOTE_PORT_NO_VAL_SMASK; + dd_dev_info(dd, + "Neighbor GUID: %llx Neighbor type %d\n", + ppd->neighbor_guid, + ppd->neighbor_type); + } + + /* physical link went up */ + ppd->linkup = 1; + ppd->offline_disabled_reason = OPA_LINKDOWN_REASON_NONE; + + /* link widths are not available until the link is fully up */ + get_linkup_link_widths(ppd); + + } else { + /* physical link went down */ + ppd->linkup = 0; + + /* clear HW details of the previous connection */ + reset_link_credits(dd); + + /* freeze after a link down to guarantee a clean egress */ + start_freeze_handling(ppd, FREEZE_SELF|FREEZE_LINK_DOWN); + + ev = IB_EVENT_PORT_ERR; + + hfi1_set_uevent_bits(ppd, _HFI1_EVENT_LINKDOWN_BIT); + + /* if we are down, the neighbor is down */ + ppd->neighbor_normal = 0; + + /* notify IB of the link change */ + signal_ib_event(ppd, ev); + } + + +} + +/* + * Handle receive or urgent interrupts for user contexts. This means a user + * process was waiting for a packet to arrive, and didn't want to poll. + */ +void handle_user_interrupt(struct hfi1_ctxtdata *rcd) +{ + struct hfi1_devdata *dd = rcd->dd; + unsigned long flags; + + spin_lock_irqsave(&dd->uctxt_lock, flags); + if (!rcd->cnt) + goto done; + + if (test_and_clear_bit(HFI1_CTXT_WAITING_RCV, &rcd->event_flags)) { + wake_up_interruptible(&rcd->wait); + hfi1_rcvctrl(dd, HFI1_RCVCTRL_INTRAVAIL_DIS, rcd->ctxt); + } else if (test_and_clear_bit(HFI1_CTXT_WAITING_URG, + &rcd->event_flags)) { + rcd->urgent++; + wake_up_interruptible(&rcd->wait); + } +done: + spin_unlock_irqrestore(&dd->uctxt_lock, flags); +} diff --git a/drivers/staging/rdma/hfi1/iowait.h b/drivers/staging/rdma/hfi1/iowait.h new file mode 100644 index 000000000000..fa361b405851 --- /dev/null +++ b/drivers/staging/rdma/hfi1/iowait.h @@ -0,0 +1,186 @@ +#ifndef _HFI1_IOWAIT_H +#define _HFI1_IOWAIT_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/list.h> +#include <linux/workqueue.h> +#include <linux/sched.h> + +/* + * typedef (*restart_t)() - restart callback + * @work: pointer to work structure + */ +typedef void (*restart_t)(struct work_struct *work); + +struct sdma_txreq; +struct sdma_engine; +/** + * struct iowait - linkage for delayed progress/waiting + * @list: used to add/insert into QP/PQ wait lists + * @tx_head: overflow list of sdma_txreq's + * @sleep: no space callback + * @wakeup: space callback + * @iowork: workqueue overhead + * @wait_dma: wait for sdma_busy == 0 + * @sdma_busy: # of packets in flight + * @count: total number of descriptors in tx_head'ed list + * @tx_limit: limit for overflow queuing + * @tx_count: number of tx entry's in tx_head'ed list + * + * This is to be embedded in user's state structure + * (QP or PQ). + * + * The sleep and wakeup members are a + * bit misnamed. They do not strictly + * speaking sleep or wake up, but they + * are callbacks for the ULP to implement + * what ever queuing/dequeuing of + * the embedded iowait and its containing struct + * when a resource shortage like SDMA ring space is seen. + * + * Both potentially have locks help + * so sleeping is not allowed. + * + * The wait_dma member along with the iow + */ + +struct iowait { + struct list_head list; + struct list_head tx_head; + int (*sleep)( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *tx, + unsigned seq); + void (*wakeup)(struct iowait *wait, int reason); + struct work_struct iowork; + wait_queue_head_t wait_dma; + atomic_t sdma_busy; + u32 count; + u32 tx_limit; + u32 tx_count; +}; + +#define SDMA_AVAIL_REASON 0 + +/** + * iowait_init() - initialize wait structure + * @wait: wait struct to initialize + * @tx_limit: limit for overflow queuing + * @func: restart function for workqueue + * @sleep: sleep function for no space + * @wakeup: wakeup function for no space + * + * This function initializes the iowait + * structure embedded in the QP or PQ. + * + */ + +static inline void iowait_init( + struct iowait *wait, + u32 tx_limit, + void (*func)(struct work_struct *work), + int (*sleep)( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *tx, + unsigned seq), + void (*wakeup)(struct iowait *wait, int reason)) +{ + wait->count = 0; + INIT_LIST_HEAD(&wait->list); + INIT_LIST_HEAD(&wait->tx_head); + INIT_WORK(&wait->iowork, func); + init_waitqueue_head(&wait->wait_dma); + atomic_set(&wait->sdma_busy, 0); + wait->tx_limit = tx_limit; + wait->sleep = sleep; + wait->wakeup = wakeup; +} + +/** + * iowait_schedule() - initialize wait structure + * @wait: wait struct to schedule + * @wq: workqueue for schedule + */ +static inline void iowait_schedule( + struct iowait *wait, + struct workqueue_struct *wq) +{ + queue_work(wq, &wait->iowork); +} + +/** + * iowait_sdma_drain() - wait for DMAs to drain + * + * @wait: iowait structure + * + * This will delay until the iowait sdmas have + * completed. + */ +static inline void iowait_sdma_drain(struct iowait *wait) +{ + wait_event(wait->wait_dma, !atomic_read(&wait->sdma_busy)); +} + +/** + * iowait_drain_wakeup() - trigger iowait_drain() waiter + * + * @wait: iowait structure + * + * This will trigger any waiters. + */ +static inline void iowait_drain_wakeup(struct iowait *wait) +{ + wake_up(&wait->wait_dma); +} + +#endif diff --git a/drivers/staging/rdma/hfi1/keys.c b/drivers/staging/rdma/hfi1/keys.c new file mode 100644 index 000000000000..f6eff177ace1 --- /dev/null +++ b/drivers/staging/rdma/hfi1/keys.c @@ -0,0 +1,411 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "hfi.h" + +/** + * hfi1_alloc_lkey - allocate an lkey + * @mr: memory region that this lkey protects + * @dma_region: 0->normal key, 1->restricted DMA key + * + * Returns 0 if successful, otherwise returns -errno. + * + * Increments mr reference count as required. + * + * Sets the lkey field mr for non-dma regions. + * + */ + +int hfi1_alloc_lkey(struct hfi1_mregion *mr, int dma_region) +{ + unsigned long flags; + u32 r; + u32 n; + int ret = 0; + struct hfi1_ibdev *dev = to_idev(mr->pd->device); + struct hfi1_lkey_table *rkt = &dev->lk_table; + + hfi1_get_mr(mr); + spin_lock_irqsave(&rkt->lock, flags); + + /* special case for dma_mr lkey == 0 */ + if (dma_region) { + struct hfi1_mregion *tmr; + + tmr = rcu_access_pointer(dev->dma_mr); + if (!tmr) { + rcu_assign_pointer(dev->dma_mr, mr); + mr->lkey_published = 1; + } else { + hfi1_put_mr(mr); + } + goto success; + } + + /* Find the next available LKEY */ + r = rkt->next; + n = r; + for (;;) { + if (!rcu_access_pointer(rkt->table[r])) + break; + r = (r + 1) & (rkt->max - 1); + if (r == n) + goto bail; + } + rkt->next = (r + 1) & (rkt->max - 1); + /* + * Make sure lkey is never zero which is reserved to indicate an + * unrestricted LKEY. + */ + rkt->gen++; + /* + * bits are capped in verbs.c to ensure enough bits for + * generation number + */ + mr->lkey = (r << (32 - hfi1_lkey_table_size)) | + ((((1 << (24 - hfi1_lkey_table_size)) - 1) & rkt->gen) + << 8); + if (mr->lkey == 0) { + mr->lkey |= 1 << 8; + rkt->gen++; + } + rcu_assign_pointer(rkt->table[r], mr); + mr->lkey_published = 1; +success: + spin_unlock_irqrestore(&rkt->lock, flags); +out: + return ret; +bail: + hfi1_put_mr(mr); + spin_unlock_irqrestore(&rkt->lock, flags); + ret = -ENOMEM; + goto out; +} + +/** + * hfi1_free_lkey - free an lkey + * @mr: mr to free from tables + */ +void hfi1_free_lkey(struct hfi1_mregion *mr) +{ + unsigned long flags; + u32 lkey = mr->lkey; + u32 r; + struct hfi1_ibdev *dev = to_idev(mr->pd->device); + struct hfi1_lkey_table *rkt = &dev->lk_table; + int freed = 0; + + spin_lock_irqsave(&rkt->lock, flags); + if (!mr->lkey_published) + goto out; + if (lkey == 0) + RCU_INIT_POINTER(dev->dma_mr, NULL); + else { + r = lkey >> (32 - hfi1_lkey_table_size); + RCU_INIT_POINTER(rkt->table[r], NULL); + } + mr->lkey_published = 0; + freed++; +out: + spin_unlock_irqrestore(&rkt->lock, flags); + if (freed) { + synchronize_rcu(); + hfi1_put_mr(mr); + } +} + +/** + * hfi1_lkey_ok - check IB SGE for validity and initialize + * @rkt: table containing lkey to check SGE against + * @pd: protection domain + * @isge: outgoing internal SGE + * @sge: SGE to check + * @acc: access flags + * + * Return 1 if valid and successful, otherwise returns 0. + * + * increments the reference count upon success + * + * Check the IB SGE for validity and initialize our internal version + * of it. + */ +int hfi1_lkey_ok(struct hfi1_lkey_table *rkt, struct hfi1_pd *pd, + struct hfi1_sge *isge, struct ib_sge *sge, int acc) +{ + struct hfi1_mregion *mr; + unsigned n, m; + size_t off; + + /* + * We use LKEY == zero for kernel virtual addresses + * (see hfi1_get_dma_mr and dma.c). + */ + rcu_read_lock(); + if (sge->lkey == 0) { + struct hfi1_ibdev *dev = to_idev(pd->ibpd.device); + + if (pd->user) + goto bail; + mr = rcu_dereference(dev->dma_mr); + if (!mr) + goto bail; + atomic_inc(&mr->refcount); + rcu_read_unlock(); + + isge->mr = mr; + isge->vaddr = (void *) sge->addr; + isge->length = sge->length; + isge->sge_length = sge->length; + isge->m = 0; + isge->n = 0; + goto ok; + } + mr = rcu_dereference( + rkt->table[(sge->lkey >> (32 - hfi1_lkey_table_size))]); + if (unlikely(!mr || mr->lkey != sge->lkey || mr->pd != &pd->ibpd)) + goto bail; + + off = sge->addr - mr->user_base; + if (unlikely(sge->addr < mr->user_base || + off + sge->length > mr->length || + (mr->access_flags & acc) != acc)) + goto bail; + atomic_inc(&mr->refcount); + rcu_read_unlock(); + + off += mr->offset; + if (mr->page_shift) { + /* + page sizes are uniform power of 2 so no loop is necessary + entries_spanned_by_off is the number of times the loop below + would have executed. + */ + size_t entries_spanned_by_off; + + entries_spanned_by_off = off >> mr->page_shift; + off -= (entries_spanned_by_off << mr->page_shift); + m = entries_spanned_by_off / HFI1_SEGSZ; + n = entries_spanned_by_off % HFI1_SEGSZ; + } else { + m = 0; + n = 0; + while (off >= mr->map[m]->segs[n].length) { + off -= mr->map[m]->segs[n].length; + n++; + if (n >= HFI1_SEGSZ) { + m++; + n = 0; + } + } + } + isge->mr = mr; + isge->vaddr = mr->map[m]->segs[n].vaddr + off; + isge->length = mr->map[m]->segs[n].length - off; + isge->sge_length = sge->length; + isge->m = m; + isge->n = n; +ok: + return 1; +bail: + rcu_read_unlock(); + return 0; +} + +/** + * hfi1_rkey_ok - check the IB virtual address, length, and RKEY + * @qp: qp for validation + * @sge: SGE state + * @len: length of data + * @vaddr: virtual address to place data + * @rkey: rkey to check + * @acc: access flags + * + * Return 1 if successful, otherwise 0. + * + * increments the reference count upon success + */ +int hfi1_rkey_ok(struct hfi1_qp *qp, struct hfi1_sge *sge, + u32 len, u64 vaddr, u32 rkey, int acc) +{ + struct hfi1_lkey_table *rkt = &to_idev(qp->ibqp.device)->lk_table; + struct hfi1_mregion *mr; + unsigned n, m; + size_t off; + + /* + * We use RKEY == zero for kernel virtual addresses + * (see hfi1_get_dma_mr and dma.c). + */ + rcu_read_lock(); + if (rkey == 0) { + struct hfi1_pd *pd = to_ipd(qp->ibqp.pd); + struct hfi1_ibdev *dev = to_idev(pd->ibpd.device); + + if (pd->user) + goto bail; + mr = rcu_dereference(dev->dma_mr); + if (!mr) + goto bail; + atomic_inc(&mr->refcount); + rcu_read_unlock(); + + sge->mr = mr; + sge->vaddr = (void *) vaddr; + sge->length = len; + sge->sge_length = len; + sge->m = 0; + sge->n = 0; + goto ok; + } + + mr = rcu_dereference( + rkt->table[(rkey >> (32 - hfi1_lkey_table_size))]); + if (unlikely(!mr || mr->lkey != rkey || qp->ibqp.pd != mr->pd)) + goto bail; + + off = vaddr - mr->iova; + if (unlikely(vaddr < mr->iova || off + len > mr->length || + (mr->access_flags & acc) == 0)) + goto bail; + atomic_inc(&mr->refcount); + rcu_read_unlock(); + + off += mr->offset; + if (mr->page_shift) { + /* + page sizes are uniform power of 2 so no loop is necessary + entries_spanned_by_off is the number of times the loop below + would have executed. + */ + size_t entries_spanned_by_off; + + entries_spanned_by_off = off >> mr->page_shift; + off -= (entries_spanned_by_off << mr->page_shift); + m = entries_spanned_by_off / HFI1_SEGSZ; + n = entries_spanned_by_off % HFI1_SEGSZ; + } else { + m = 0; + n = 0; + while (off >= mr->map[m]->segs[n].length) { + off -= mr->map[m]->segs[n].length; + n++; + if (n >= HFI1_SEGSZ) { + m++; + n = 0; + } + } + } + sge->mr = mr; + sge->vaddr = mr->map[m]->segs[n].vaddr + off; + sge->length = mr->map[m]->segs[n].length - off; + sge->sge_length = len; + sge->m = m; + sge->n = n; +ok: + return 1; +bail: + rcu_read_unlock(); + return 0; +} + +/* + * Initialize the memory region specified by the work request. + */ +int hfi1_fast_reg_mr(struct hfi1_qp *qp, struct ib_send_wr *wr) +{ + struct hfi1_lkey_table *rkt = &to_idev(qp->ibqp.device)->lk_table; + struct hfi1_pd *pd = to_ipd(qp->ibqp.pd); + struct hfi1_mregion *mr; + u32 rkey = wr->wr.fast_reg.rkey; + unsigned i, n, m; + int ret = -EINVAL; + unsigned long flags; + u64 *page_list; + size_t ps; + + spin_lock_irqsave(&rkt->lock, flags); + if (pd->user || rkey == 0) + goto bail; + + mr = rcu_dereference_protected( + rkt->table[(rkey >> (32 - hfi1_lkey_table_size))], + lockdep_is_held(&rkt->lock)); + if (unlikely(mr == NULL || qp->ibqp.pd != mr->pd)) + goto bail; + + if (wr->wr.fast_reg.page_list_len > mr->max_segs) + goto bail; + + ps = 1UL << wr->wr.fast_reg.page_shift; + if (wr->wr.fast_reg.length > ps * wr->wr.fast_reg.page_list_len) + goto bail; + + mr->user_base = wr->wr.fast_reg.iova_start; + mr->iova = wr->wr.fast_reg.iova_start; + mr->lkey = rkey; + mr->length = wr->wr.fast_reg.length; + mr->access_flags = wr->wr.fast_reg.access_flags; + page_list = wr->wr.fast_reg.page_list->page_list; + m = 0; + n = 0; + for (i = 0; i < wr->wr.fast_reg.page_list_len; i++) { + mr->map[m]->segs[n].vaddr = (void *) page_list[i]; + mr->map[m]->segs[n].length = ps; + if (++n == HFI1_SEGSZ) { + m++; + n = 0; + } + } + + ret = 0; +bail: + spin_unlock_irqrestore(&rkt->lock, flags); + return ret; +} diff --git a/drivers/staging/rdma/hfi1/mad.c b/drivers/staging/rdma/hfi1/mad.c new file mode 100644 index 000000000000..0a18fee46432 --- /dev/null +++ b/drivers/staging/rdma/hfi1/mad.c @@ -0,0 +1,4257 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/net.h> +#define OPA_NUM_PKEY_BLOCKS_PER_SMP (OPA_SMP_DR_DATA_SIZE \ + / (OPA_PARTITION_TABLE_BLK_SIZE * sizeof(u16))) + +#include "hfi.h" +#include "mad.h" +#include "trace.h" + +/* the reset value from the FM is supposed to be 0xffff, handle both */ +#define OPA_LINK_WIDTH_RESET_OLD 0x0fff +#define OPA_LINK_WIDTH_RESET 0xffff + +static int reply(struct ib_mad_hdr *smp) +{ + /* + * The verbs framework will handle the directed/LID route + * packet changes. + */ + smp->method = IB_MGMT_METHOD_GET_RESP; + if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + smp->status |= IB_SMP_DIRECTION; + return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY; +} + +static inline void clear_opa_smp_data(struct opa_smp *smp) +{ + void *data = opa_get_smp_data(smp); + size_t size = opa_get_smp_data_size(smp); + + memset(data, 0, size); +} + +static void send_trap(struct hfi1_ibport *ibp, void *data, unsigned len) +{ + struct ib_mad_send_buf *send_buf; + struct ib_mad_agent *agent; + struct ib_smp *smp; + int ret; + unsigned long flags; + unsigned long timeout; + int pkey_idx; + u32 qpn = ppd_from_ibp(ibp)->sm_trap_qp; + + agent = ibp->send_agent; + if (!agent) + return; + + /* o14-3.2.1 */ + if (ppd_from_ibp(ibp)->lstate != IB_PORT_ACTIVE) + return; + + /* o14-2 */ + if (ibp->trap_timeout && time_before(jiffies, ibp->trap_timeout)) + return; + + pkey_idx = hfi1_lookup_pkey_idx(ibp, LIM_MGMT_P_KEY); + if (pkey_idx < 0) { + pr_warn("%s: failed to find limited mgmt pkey, defaulting 0x%x\n", + __func__, hfi1_get_pkey(ibp, 1)); + pkey_idx = 1; + } + + send_buf = ib_create_send_mad(agent, qpn, pkey_idx, 0, + IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, + GFP_ATOMIC, IB_MGMT_BASE_VERSION); + if (IS_ERR(send_buf)) + return; + + smp = send_buf->mad; + smp->base_version = IB_MGMT_BASE_VERSION; + smp->mgmt_class = IB_MGMT_CLASS_SUBN_LID_ROUTED; + smp->class_version = 1; + smp->method = IB_MGMT_METHOD_TRAP; + ibp->tid++; + smp->tid = cpu_to_be64(ibp->tid); + smp->attr_id = IB_SMP_ATTR_NOTICE; + /* o14-1: smp->mkey = 0; */ + memcpy(smp->data, data, len); + + spin_lock_irqsave(&ibp->lock, flags); + if (!ibp->sm_ah) { + if (ibp->sm_lid != be16_to_cpu(IB_LID_PERMISSIVE)) { + struct ib_ah *ah; + + ah = hfi1_create_qp0_ah(ibp, ibp->sm_lid); + if (IS_ERR(ah)) + ret = PTR_ERR(ah); + else { + send_buf->ah = ah; + ibp->sm_ah = to_iah(ah); + ret = 0; + } + } else + ret = -EINVAL; + } else { + send_buf->ah = &ibp->sm_ah->ibah; + ret = 0; + } + spin_unlock_irqrestore(&ibp->lock, flags); + + if (!ret) + ret = ib_post_send_mad(send_buf, NULL); + if (!ret) { + /* 4.096 usec. */ + timeout = (4096 * (1UL << ibp->subnet_timeout)) / 1000; + ibp->trap_timeout = jiffies + usecs_to_jiffies(timeout); + } else { + ib_free_send_mad(send_buf); + ibp->trap_timeout = 0; + } +} + +/* + * Send a bad [PQ]_Key trap (ch. 14.3.8). + */ +void hfi1_bad_pqkey(struct hfi1_ibport *ibp, __be16 trap_num, u32 key, u32 sl, + u32 qp1, u32 qp2, __be16 lid1, __be16 lid2) +{ + struct ib_mad_notice_attr data; + + if (trap_num == IB_NOTICE_TRAP_BAD_PKEY) + ibp->pkey_violations++; + else + ibp->qkey_violations++; + ibp->n_pkt_drops++; + + /* Send violation trap */ + data.generic_type = IB_NOTICE_TYPE_SECURITY; + data.prod_type_msb = 0; + data.prod_type_lsb = IB_NOTICE_PROD_CA; + data.trap_num = trap_num; + data.issuer_lid = cpu_to_be16(ppd_from_ibp(ibp)->lid); + data.toggle_count = 0; + memset(&data.details, 0, sizeof(data.details)); + data.details.ntc_257_258.lid1 = lid1; + data.details.ntc_257_258.lid2 = lid2; + data.details.ntc_257_258.key = cpu_to_be32(key); + data.details.ntc_257_258.sl_qp1 = cpu_to_be32((sl << 28) | qp1); + data.details.ntc_257_258.qp2 = cpu_to_be32(qp2); + + send_trap(ibp, &data, sizeof(data)); +} + +/* + * Send a bad M_Key trap (ch. 14.3.9). + */ +static void bad_mkey(struct hfi1_ibport *ibp, struct ib_mad_hdr *mad, + __be64 mkey, __be32 dr_slid, u8 return_path[], u8 hop_cnt) +{ + struct ib_mad_notice_attr data; + + /* Send violation trap */ + data.generic_type = IB_NOTICE_TYPE_SECURITY; + data.prod_type_msb = 0; + data.prod_type_lsb = IB_NOTICE_PROD_CA; + data.trap_num = IB_NOTICE_TRAP_BAD_MKEY; + data.issuer_lid = cpu_to_be16(ppd_from_ibp(ibp)->lid); + data.toggle_count = 0; + memset(&data.details, 0, sizeof(data.details)); + data.details.ntc_256.lid = data.issuer_lid; + data.details.ntc_256.method = mad->method; + data.details.ntc_256.attr_id = mad->attr_id; + data.details.ntc_256.attr_mod = mad->attr_mod; + data.details.ntc_256.mkey = mkey; + if (mad->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { + + data.details.ntc_256.dr_slid = (__force __be16)dr_slid; + data.details.ntc_256.dr_trunc_hop = IB_NOTICE_TRAP_DR_NOTICE; + if (hop_cnt > ARRAY_SIZE(data.details.ntc_256.dr_rtn_path)) { + data.details.ntc_256.dr_trunc_hop |= + IB_NOTICE_TRAP_DR_TRUNC; + hop_cnt = ARRAY_SIZE(data.details.ntc_256.dr_rtn_path); + } + data.details.ntc_256.dr_trunc_hop |= hop_cnt; + memcpy(data.details.ntc_256.dr_rtn_path, return_path, + hop_cnt); + } + + send_trap(ibp, &data, sizeof(data)); +} + +/* + * Send a Port Capability Mask Changed trap (ch. 14.3.11). + */ +void hfi1_cap_mask_chg(struct hfi1_ibport *ibp) +{ + struct ib_mad_notice_attr data; + + data.generic_type = IB_NOTICE_TYPE_INFO; + data.prod_type_msb = 0; + data.prod_type_lsb = IB_NOTICE_PROD_CA; + data.trap_num = IB_NOTICE_TRAP_CAP_MASK_CHG; + data.issuer_lid = cpu_to_be16(ppd_from_ibp(ibp)->lid); + data.toggle_count = 0; + memset(&data.details, 0, sizeof(data.details)); + data.details.ntc_144.lid = data.issuer_lid; + data.details.ntc_144.new_cap_mask = cpu_to_be32(ibp->port_cap_flags); + + send_trap(ibp, &data, sizeof(data)); +} + +/* + * Send a System Image GUID Changed trap (ch. 14.3.12). + */ +void hfi1_sys_guid_chg(struct hfi1_ibport *ibp) +{ + struct ib_mad_notice_attr data; + + data.generic_type = IB_NOTICE_TYPE_INFO; + data.prod_type_msb = 0; + data.prod_type_lsb = IB_NOTICE_PROD_CA; + data.trap_num = IB_NOTICE_TRAP_SYS_GUID_CHG; + data.issuer_lid = cpu_to_be16(ppd_from_ibp(ibp)->lid); + data.toggle_count = 0; + memset(&data.details, 0, sizeof(data.details)); + data.details.ntc_145.lid = data.issuer_lid; + data.details.ntc_145.new_sys_guid = ib_hfi1_sys_image_guid; + + send_trap(ibp, &data, sizeof(data)); +} + +/* + * Send a Node Description Changed trap (ch. 14.3.13). + */ +void hfi1_node_desc_chg(struct hfi1_ibport *ibp) +{ + struct ib_mad_notice_attr data; + + data.generic_type = IB_NOTICE_TYPE_INFO; + data.prod_type_msb = 0; + data.prod_type_lsb = IB_NOTICE_PROD_CA; + data.trap_num = IB_NOTICE_TRAP_CAP_MASK_CHG; + data.issuer_lid = cpu_to_be16(ppd_from_ibp(ibp)->lid); + data.toggle_count = 0; + memset(&data.details, 0, sizeof(data.details)); + data.details.ntc_144.lid = data.issuer_lid; + data.details.ntc_144.local_changes = 1; + data.details.ntc_144.change_flags = IB_NOTICE_TRAP_NODE_DESC_CHG; + + send_trap(ibp, &data, sizeof(data)); +} + +static int __subn_get_opa_nodedesc(struct opa_smp *smp, u32 am, + u8 *data, struct ib_device *ibdev, + u8 port, u32 *resp_len) +{ + struct opa_node_description *nd; + + if (am) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + nd = (struct opa_node_description *)data; + + memcpy(nd->data, ibdev->node_desc, sizeof(nd->data)); + + if (resp_len) + *resp_len += sizeof(*nd); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_get_opa_nodeinfo(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct opa_node_info *ni; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + unsigned pidx = port - 1; /* IB number port from 1, hw from 0 */ + + ni = (struct opa_node_info *)data; + + /* GUID 0 is illegal */ + if (am || pidx >= dd->num_pports || dd->pport[pidx].guid == 0) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ni->port_guid = cpu_to_be64(dd->pport[pidx].guid); + ni->base_version = OPA_MGMT_BASE_VERSION; + ni->class_version = OPA_SMI_CLASS_VERSION; + ni->node_type = 1; /* channel adapter */ + ni->num_ports = ibdev->phys_port_cnt; + /* This is already in network order */ + ni->system_image_guid = ib_hfi1_sys_image_guid; + /* Use first-port GUID as node */ + ni->node_guid = cpu_to_be64(dd->pport->guid); + ni->partition_cap = cpu_to_be16(hfi1_get_npkeys(dd)); + ni->device_id = cpu_to_be16(dd->pcidev->device); + ni->revision = cpu_to_be32(dd->minrev); + ni->local_port_num = port; + ni->vendor_id[0] = dd->oui1; + ni->vendor_id[1] = dd->oui2; + ni->vendor_id[2] = dd->oui3; + + if (resp_len) + *resp_len += sizeof(*ni); + + return reply((struct ib_mad_hdr *)smp); +} + +static int subn_get_nodeinfo(struct ib_smp *smp, struct ib_device *ibdev, + u8 port) +{ + struct ib_node_info *nip = (struct ib_node_info *)&smp->data; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + unsigned pidx = port - 1; /* IB number port from 1, hw from 0 */ + + /* GUID 0 is illegal */ + if (smp->attr_mod || pidx >= dd->num_pports || + dd->pport[pidx].guid == 0) + smp->status |= IB_SMP_INVALID_FIELD; + else + nip->port_guid = cpu_to_be64(dd->pport[pidx].guid); + + nip->base_version = OPA_MGMT_BASE_VERSION; + nip->class_version = OPA_SMI_CLASS_VERSION; + nip->node_type = 1; /* channel adapter */ + nip->num_ports = ibdev->phys_port_cnt; + /* This is already in network order */ + nip->sys_guid = ib_hfi1_sys_image_guid; + /* Use first-port GUID as node */ + nip->node_guid = cpu_to_be64(dd->pport->guid); + nip->partition_cap = cpu_to_be16(hfi1_get_npkeys(dd)); + nip->device_id = cpu_to_be16(dd->pcidev->device); + nip->revision = cpu_to_be32(dd->minrev); + nip->local_port_num = port; + nip->vendor_id[0] = dd->oui1; + nip->vendor_id[1] = dd->oui2; + nip->vendor_id[2] = dd->oui3; + + return reply((struct ib_mad_hdr *)smp); +} + +static void set_link_width_enabled(struct hfi1_pportdata *ppd, u32 w) +{ + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_LWID_ENB, w); +} + +static void set_link_width_downgrade_enabled(struct hfi1_pportdata *ppd, u32 w) +{ + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_LWID_DG_ENB, w); +} + +static void set_link_speed_enabled(struct hfi1_pportdata *ppd, u32 s) +{ + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_SPD_ENB, s); +} + +static int check_mkey(struct hfi1_ibport *ibp, struct ib_mad_hdr *mad, + int mad_flags, __be64 mkey, __be32 dr_slid, + u8 return_path[], u8 hop_cnt) +{ + int valid_mkey = 0; + int ret = 0; + + /* Is the mkey in the process of expiring? */ + if (ibp->mkey_lease_timeout && + time_after_eq(jiffies, ibp->mkey_lease_timeout)) { + /* Clear timeout and mkey protection field. */ + ibp->mkey_lease_timeout = 0; + ibp->mkeyprot = 0; + } + + if ((mad_flags & IB_MAD_IGNORE_MKEY) || ibp->mkey == 0 || + ibp->mkey == mkey) + valid_mkey = 1; + + /* Unset lease timeout on any valid Get/Set/TrapRepress */ + if (valid_mkey && ibp->mkey_lease_timeout && + (mad->method == IB_MGMT_METHOD_GET || + mad->method == IB_MGMT_METHOD_SET || + mad->method == IB_MGMT_METHOD_TRAP_REPRESS)) + ibp->mkey_lease_timeout = 0; + + if (!valid_mkey) { + switch (mad->method) { + case IB_MGMT_METHOD_GET: + /* Bad mkey not a violation below level 2 */ + if (ibp->mkeyprot < 2) + break; + case IB_MGMT_METHOD_SET: + case IB_MGMT_METHOD_TRAP_REPRESS: + if (ibp->mkey_violations != 0xFFFF) + ++ibp->mkey_violations; + if (!ibp->mkey_lease_timeout && ibp->mkey_lease_period) + ibp->mkey_lease_timeout = jiffies + + ibp->mkey_lease_period * HZ; + /* Generate a trap notice. */ + bad_mkey(ibp, mad, mkey, dr_slid, return_path, + hop_cnt); + ret = 1; + } + } + + return ret; +} + +/* + * The SMA caches reads from LCB registers in case the LCB is unavailable. + * (The LCB is unavailable in certain link states, for example.) + */ +struct lcb_datum { + u32 off; + u64 val; +}; + +static struct lcb_datum lcb_cache[] = { + { DC_LCB_STS_ROUND_TRIP_LTP_CNT, 0 }, +}; + +static int write_lcb_cache(u32 off, u64 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lcb_cache); i++) { + if (lcb_cache[i].off == off) { + lcb_cache[i].val = val; + return 0; + } + } + + pr_warn("%s bad offset 0x%x\n", __func__, off); + return -1; +} + +static int read_lcb_cache(u32 off, u64 *val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lcb_cache); i++) { + if (lcb_cache[i].off == off) { + *val = lcb_cache[i].val; + return 0; + } + } + + pr_warn("%s bad offset 0x%x\n", __func__, off); + return -1; +} + +void read_ltp_rtt(struct hfi1_devdata *dd) +{ + u64 reg; + + if (read_lcb_csr(dd, DC_LCB_STS_ROUND_TRIP_LTP_CNT, ®)) + dd_dev_err(dd, "%s: unable to read LTP RTT\n", __func__); + else + write_lcb_cache(DC_LCB_STS_ROUND_TRIP_LTP_CNT, reg); +} + +static u8 __opa_porttype(struct hfi1_pportdata *ppd) +{ + if (qsfp_mod_present(ppd)) { + if (ppd->qsfp_info.cache_valid) + return OPA_PORT_TYPE_STANDARD; + return OPA_PORT_TYPE_DISCONNECTED; + } + return OPA_PORT_TYPE_UNKNOWN; +} + +static int __subn_get_opa_portinfo(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + int i; + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + struct hfi1_ibport *ibp; + struct opa_port_info *pi = (struct opa_port_info *)data; + u8 mtu; + u8 credit_rate; + u32 state; + u32 num_ports = OPA_AM_NPORT(am); + u32 start_of_sm_config = OPA_AM_START_SM_CFG(am); + u32 buffer_units; + u64 tmp = 0; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + dd = dd_from_ibdev(ibdev); + /* IB numbers ports from 1, hw from 0 */ + ppd = dd->pport + (port - 1); + ibp = &ppd->ibport_data; + + if (ppd->vls_supported/2 > ARRAY_SIZE(pi->neigh_mtu.pvlx_to_mtu) || + ppd->vls_supported > ARRAY_SIZE(dd->vld)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + pi->lid = cpu_to_be32(ppd->lid); + + /* Only return the mkey if the protection field allows it. */ + if (!(smp->method == IB_MGMT_METHOD_GET && + ibp->mkey != smp->mkey && + ibp->mkeyprot == 1)) + pi->mkey = ibp->mkey; + + pi->subnet_prefix = ibp->gid_prefix; + pi->sm_lid = cpu_to_be32(ibp->sm_lid); + pi->ib_cap_mask = cpu_to_be32(ibp->port_cap_flags); + pi->mkey_lease_period = cpu_to_be16(ibp->mkey_lease_period); + pi->sm_trap_qp = cpu_to_be32(ppd->sm_trap_qp); + pi->sa_qp = cpu_to_be32(ppd->sa_qp); + + pi->link_width.enabled = cpu_to_be16(ppd->link_width_enabled); + pi->link_width.supported = cpu_to_be16(ppd->link_width_supported); + pi->link_width.active = cpu_to_be16(ppd->link_width_active); + + pi->link_width_downgrade.supported = + cpu_to_be16(ppd->link_width_downgrade_supported); + pi->link_width_downgrade.enabled = + cpu_to_be16(ppd->link_width_downgrade_enabled); + pi->link_width_downgrade.tx_active = + cpu_to_be16(ppd->link_width_downgrade_tx_active); + pi->link_width_downgrade.rx_active = + cpu_to_be16(ppd->link_width_downgrade_rx_active); + + pi->link_speed.supported = cpu_to_be16(ppd->link_speed_supported); + pi->link_speed.active = cpu_to_be16(ppd->link_speed_active); + pi->link_speed.enabled = cpu_to_be16(ppd->link_speed_enabled); + + state = driver_lstate(ppd); + + if (start_of_sm_config && (state == IB_PORT_INIT)) + ppd->is_sm_config_started = 1; + + pi->port_phys_conf = __opa_porttype(ppd) & 0xf; + +#if PI_LED_ENABLE_SUP + pi->port_states.ledenable_offlinereason = ppd->neighbor_normal << 4; + pi->port_states.ledenable_offlinereason |= + ppd->is_sm_config_started << 5; + pi->port_states.ledenable_offlinereason |= + ppd->offline_disabled_reason & OPA_PI_MASK_OFFLINE_REASON; +#else + pi->port_states.offline_reason = ppd->neighbor_normal << 4; + pi->port_states.offline_reason |= ppd->is_sm_config_started << 5; + pi->port_states.offline_reason |= ppd->offline_disabled_reason & + OPA_PI_MASK_OFFLINE_REASON; +#endif /* PI_LED_ENABLE_SUP */ + + pi->port_states.portphysstate_portstate = + (hfi1_ibphys_portstate(ppd) << 4) | state; + + pi->mkeyprotect_lmc = (ibp->mkeyprot << 6) | ppd->lmc; + + memset(pi->neigh_mtu.pvlx_to_mtu, 0, sizeof(pi->neigh_mtu.pvlx_to_mtu)); + for (i = 0; i < ppd->vls_supported; i++) { + mtu = mtu_to_enum(dd->vld[i].mtu, HFI1_DEFAULT_ACTIVE_MTU); + if ((i % 2) == 0) + pi->neigh_mtu.pvlx_to_mtu[i/2] |= (mtu << 4); + else + pi->neigh_mtu.pvlx_to_mtu[i/2] |= mtu; + } + /* don't forget VL 15 */ + mtu = mtu_to_enum(dd->vld[15].mtu, 2048); + pi->neigh_mtu.pvlx_to_mtu[15/2] |= mtu; + pi->smsl = ibp->sm_sl & OPA_PI_MASK_SMSL; + pi->operational_vls = hfi1_get_ib_cfg(ppd, HFI1_IB_CFG_OP_VLS); + pi->partenforce_filterraw |= + (ppd->linkinit_reason & OPA_PI_MASK_LINKINIT_REASON); + if (ppd->part_enforce & HFI1_PART_ENFORCE_IN) + pi->partenforce_filterraw |= OPA_PI_MASK_PARTITION_ENFORCE_IN; + if (ppd->part_enforce & HFI1_PART_ENFORCE_OUT) + pi->partenforce_filterraw |= OPA_PI_MASK_PARTITION_ENFORCE_OUT; + pi->mkey_violations = cpu_to_be16(ibp->mkey_violations); + /* P_KeyViolations are counted by hardware. */ + pi->pkey_violations = cpu_to_be16(ibp->pkey_violations); + pi->qkey_violations = cpu_to_be16(ibp->qkey_violations); + + pi->vl.cap = ppd->vls_supported; + pi->vl.high_limit = cpu_to_be16(ibp->vl_high_limit); + pi->vl.arb_high_cap = (u8)hfi1_get_ib_cfg(ppd, HFI1_IB_CFG_VL_HIGH_CAP); + pi->vl.arb_low_cap = (u8)hfi1_get_ib_cfg(ppd, HFI1_IB_CFG_VL_LOW_CAP); + + pi->clientrereg_subnettimeout = ibp->subnet_timeout; + + pi->port_link_mode = cpu_to_be16(OPA_PORT_LINK_MODE_OPA << 10 | + OPA_PORT_LINK_MODE_OPA << 5 | + OPA_PORT_LINK_MODE_OPA); + + pi->port_ltp_crc_mode = cpu_to_be16(ppd->port_ltp_crc_mode); + + pi->port_mode = cpu_to_be16( + ppd->is_active_optimize_enabled ? + OPA_PI_MASK_PORT_ACTIVE_OPTOMIZE : 0); + + pi->port_packet_format.supported = + cpu_to_be16(OPA_PORT_PACKET_FORMAT_9B); + pi->port_packet_format.enabled = + cpu_to_be16(OPA_PORT_PACKET_FORMAT_9B); + + /* flit_control.interleave is (OPA V1, version .76): + * bits use + * ---- --- + * 2 res + * 2 DistanceSupported + * 2 DistanceEnabled + * 5 MaxNextLevelTxEnabled + * 5 MaxNestLevelRxSupported + * + * HFI supports only "distance mode 1" (see OPA V1, version .76, + * section 9.6.2), so set DistanceSupported, DistanceEnabled + * to 0x1. + */ + pi->flit_control.interleave = cpu_to_be16(0x1400); + + pi->link_down_reason = ppd->local_link_down_reason.sma; + pi->neigh_link_down_reason = ppd->neigh_link_down_reason.sma; + pi->port_error_action = cpu_to_be32(ppd->port_error_action); + pi->mtucap = mtu_to_enum(hfi1_max_mtu, IB_MTU_4096); + + /* 32.768 usec. response time (guessing) */ + pi->resptimevalue = 3; + + pi->local_port_num = port; + + /* buffer info for FM */ + pi->overall_buffer_space = cpu_to_be16(dd->link_credits); + + pi->neigh_node_guid = cpu_to_be64(ppd->neighbor_guid); + pi->neigh_port_num = ppd->neighbor_port_number; + pi->port_neigh_mode = + (ppd->neighbor_type & OPA_PI_MASK_NEIGH_NODE_TYPE) | + (ppd->mgmt_allowed ? OPA_PI_MASK_NEIGH_MGMT_ALLOWED : 0) | + (ppd->neighbor_fm_security ? + OPA_PI_MASK_NEIGH_FW_AUTH_BYPASS : 0); + + /* HFIs shall always return VL15 credits to their + * neighbor in a timely manner, without any credit return pacing. + */ + credit_rate = 0; + buffer_units = (dd->vau) & OPA_PI_MASK_BUF_UNIT_BUF_ALLOC; + buffer_units |= (dd->vcu << 3) & OPA_PI_MASK_BUF_UNIT_CREDIT_ACK; + buffer_units |= (credit_rate << 6) & + OPA_PI_MASK_BUF_UNIT_VL15_CREDIT_RATE; + buffer_units |= (dd->vl15_init << 11) & OPA_PI_MASK_BUF_UNIT_VL15_INIT; + pi->buffer_units = cpu_to_be32(buffer_units); + + pi->opa_cap_mask = cpu_to_be16(OPA_CAP_MASK3_IsSharedSpaceSupported); + + /* HFI supports a replay buffer 128 LTPs in size */ + pi->replay_depth.buffer = 0x80; + /* read the cached value of DC_LCB_STS_ROUND_TRIP_LTP_CNT */ + read_lcb_cache(DC_LCB_STS_ROUND_TRIP_LTP_CNT, &tmp); + + /* this counter is 16 bits wide, but the replay_depth.wire + * variable is only 8 bits */ + if (tmp > 0xff) + tmp = 0xff; + pi->replay_depth.wire = tmp; + + if (resp_len) + *resp_len += sizeof(struct opa_port_info); + + return reply((struct ib_mad_hdr *)smp); +} + +/** + * get_pkeys - return the PKEY table + * @dd: the hfi1_ib device + * @port: the IB port number + * @pkeys: the pkey table is placed here + */ +static int get_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys) +{ + struct hfi1_pportdata *ppd = dd->pport + port - 1; + + memcpy(pkeys, ppd->pkeys, sizeof(ppd->pkeys)); + + return 0; +} + +static int __subn_get_opa_pkeytable(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u32 n_blocks_req = OPA_AM_NBLK(am); + u32 start_block = am & 0x7ff; + __be16 *p; + u16 *q; + int i; + u16 n_blocks_avail; + unsigned npkeys = hfi1_get_npkeys(dd); + size_t size; + + if (n_blocks_req == 0) { + pr_warn("OPA Get PKey AM Invalid : P = %d; B = 0x%x; N = 0x%x\n", + port, start_block, n_blocks_req); + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + n_blocks_avail = (u16) (npkeys/OPA_PARTITION_TABLE_BLK_SIZE) + 1; + + size = (n_blocks_req * OPA_PARTITION_TABLE_BLK_SIZE) * sizeof(u16); + + if (start_block + n_blocks_req > n_blocks_avail || + n_blocks_req > OPA_NUM_PKEY_BLOCKS_PER_SMP) { + pr_warn("OPA Get PKey AM Invalid : s 0x%x; req 0x%x; " + "avail 0x%x; blk/smp 0x%lx\n", + start_block, n_blocks_req, n_blocks_avail, + OPA_NUM_PKEY_BLOCKS_PER_SMP); + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + p = (__be16 *) data; + q = (u16 *)data; + /* get the real pkeys if we are requesting the first block */ + if (start_block == 0) { + get_pkeys(dd, port, q); + for (i = 0; i < npkeys; i++) + p[i] = cpu_to_be16(q[i]); + if (resp_len) + *resp_len += size; + } else + smp->status |= IB_SMP_INVALID_FIELD; + + return reply((struct ib_mad_hdr *)smp); +} + +enum { + HFI_TRANSITION_DISALLOWED, + HFI_TRANSITION_IGNORED, + HFI_TRANSITION_ALLOWED, + HFI_TRANSITION_UNDEFINED, +}; + +/* + * Use shortened names to improve readability of + * {logical,physical}_state_transitions + */ +enum { + __D = HFI_TRANSITION_DISALLOWED, + __I = HFI_TRANSITION_IGNORED, + __A = HFI_TRANSITION_ALLOWED, + __U = HFI_TRANSITION_UNDEFINED, +}; + +/* + * IB_PORTPHYSSTATE_POLLING (2) through OPA_PORTPHYSSTATE_MAX (11) are + * represented in physical_state_transitions. + */ +#define __N_PHYSTATES (OPA_PORTPHYSSTATE_MAX - IB_PORTPHYSSTATE_POLLING + 1) + +/* + * Within physical_state_transitions, rows represent "old" states, + * columns "new" states, and physical_state_transitions.allowed[old][new] + * indicates if the transition from old state to new state is legal (see + * OPAg1v1, Table 6-4). + */ +static const struct { + u8 allowed[__N_PHYSTATES][__N_PHYSTATES]; +} physical_state_transitions = { + { + /* 2 3 4 5 6 7 8 9 10 11 */ + /* 2 */ { __A, __A, __D, __D, __D, __D, __D, __D, __D, __D }, + /* 3 */ { __A, __I, __D, __D, __D, __D, __D, __D, __D, __A }, + /* 4 */ { __U, __U, __U, __U, __U, __U, __U, __U, __U, __U }, + /* 5 */ { __A, __A, __D, __I, __D, __D, __D, __D, __D, __D }, + /* 6 */ { __U, __U, __U, __U, __U, __U, __U, __U, __U, __U }, + /* 7 */ { __D, __A, __D, __D, __D, __I, __D, __D, __D, __D }, + /* 8 */ { __U, __U, __U, __U, __U, __U, __U, __U, __U, __U }, + /* 9 */ { __I, __A, __D, __D, __D, __D, __D, __I, __D, __D }, + /*10 */ { __U, __U, __U, __U, __U, __U, __U, __U, __U, __U }, + /*11 */ { __D, __A, __D, __D, __D, __D, __D, __D, __D, __I }, + } +}; + +/* + * IB_PORT_DOWN (1) through IB_PORT_ACTIVE_DEFER (5) are represented + * logical_state_transitions + */ + +#define __N_LOGICAL_STATES (IB_PORT_ACTIVE_DEFER - IB_PORT_DOWN + 1) + +/* + * Within logical_state_transitions rows represent "old" states, + * columns "new" states, and logical_state_transitions.allowed[old][new] + * indicates if the transition from old state to new state is legal (see + * OPAg1v1, Table 9-12). + */ +static const struct { + u8 allowed[__N_LOGICAL_STATES][__N_LOGICAL_STATES]; +} logical_state_transitions = { + { + /* 1 2 3 4 5 */ + /* 1 */ { __I, __D, __D, __D, __U}, + /* 2 */ { __D, __I, __A, __D, __U}, + /* 3 */ { __D, __D, __I, __A, __U}, + /* 4 */ { __D, __D, __I, __I, __U}, + /* 5 */ { __U, __U, __U, __U, __U}, + } +}; + +static int logical_transition_allowed(int old, int new) +{ + if (old < IB_PORT_NOP || old > IB_PORT_ACTIVE_DEFER || + new < IB_PORT_NOP || new > IB_PORT_ACTIVE_DEFER) { + pr_warn("invalid logical state(s) (old %d new %d)\n", + old, new); + return HFI_TRANSITION_UNDEFINED; + } + + if (new == IB_PORT_NOP) + return HFI_TRANSITION_ALLOWED; /* always allowed */ + + /* adjust states for indexing into logical_state_transitions */ + old -= IB_PORT_DOWN; + new -= IB_PORT_DOWN; + + if (old < 0 || new < 0) + return HFI_TRANSITION_UNDEFINED; + return logical_state_transitions.allowed[old][new]; +} + +static int physical_transition_allowed(int old, int new) +{ + if (old < IB_PORTPHYSSTATE_NOP || old > OPA_PORTPHYSSTATE_MAX || + new < IB_PORTPHYSSTATE_NOP || new > OPA_PORTPHYSSTATE_MAX) { + pr_warn("invalid physical state(s) (old %d new %d)\n", + old, new); + return HFI_TRANSITION_UNDEFINED; + } + + if (new == IB_PORTPHYSSTATE_NOP) + return HFI_TRANSITION_ALLOWED; /* always allowed */ + + /* adjust states for indexing into physical_state_transitions */ + old -= IB_PORTPHYSSTATE_POLLING; + new -= IB_PORTPHYSSTATE_POLLING; + + if (old < 0 || new < 0) + return HFI_TRANSITION_UNDEFINED; + return physical_state_transitions.allowed[old][new]; +} + +static int port_states_transition_allowed(struct hfi1_pportdata *ppd, + u32 logical_new, u32 physical_new) +{ + u32 physical_old = driver_physical_state(ppd); + u32 logical_old = driver_logical_state(ppd); + int ret, logical_allowed, physical_allowed; + + logical_allowed = ret = + logical_transition_allowed(logical_old, logical_new); + + if (ret == HFI_TRANSITION_DISALLOWED || + ret == HFI_TRANSITION_UNDEFINED) { + pr_warn("invalid logical state transition %s -> %s\n", + opa_lstate_name(logical_old), + opa_lstate_name(logical_new)); + return ret; + } + + physical_allowed = ret = + physical_transition_allowed(physical_old, physical_new); + + if (ret == HFI_TRANSITION_DISALLOWED || + ret == HFI_TRANSITION_UNDEFINED) { + pr_warn("invalid physical state transition %s -> %s\n", + opa_pstate_name(physical_old), + opa_pstate_name(physical_new)); + return ret; + } + + if (logical_allowed == HFI_TRANSITION_IGNORED && + physical_allowed == HFI_TRANSITION_IGNORED) + return HFI_TRANSITION_IGNORED; + + /* + * Either physical_allowed or logical_allowed is + * HFI_TRANSITION_ALLOWED. + */ + return HFI_TRANSITION_ALLOWED; +} + +static int set_port_states(struct hfi1_pportdata *ppd, struct opa_smp *smp, + u32 logical_state, u32 phys_state, + int suppress_idle_sma) +{ + struct hfi1_devdata *dd = ppd->dd; + u32 link_state; + int ret; + + ret = port_states_transition_allowed(ppd, logical_state, phys_state); + if (ret == HFI_TRANSITION_DISALLOWED || + ret == HFI_TRANSITION_UNDEFINED) { + /* error message emitted above */ + smp->status |= IB_SMP_INVALID_FIELD; + return 0; + } + + if (ret == HFI_TRANSITION_IGNORED) + return 0; + + if ((phys_state != IB_PORTPHYSSTATE_NOP) && + !(logical_state == IB_PORT_DOWN || + logical_state == IB_PORT_NOP)){ + pr_warn("SubnSet(OPA_PortInfo) port state invalid: logical_state 0x%x physical_state 0x%x\n", + logical_state, phys_state); + smp->status |= IB_SMP_INVALID_FIELD; + } + + /* + * Logical state changes are summarized in OPAv1g1 spec., + * Table 9-12; physical state changes are summarized in + * OPAv1g1 spec., Table 6.4. + */ + switch (logical_state) { + case IB_PORT_NOP: + if (phys_state == IB_PORTPHYSSTATE_NOP) + break; + /* FALLTHROUGH */ + case IB_PORT_DOWN: + if (phys_state == IB_PORTPHYSSTATE_NOP) + link_state = HLS_DN_DOWNDEF; + else if (phys_state == IB_PORTPHYSSTATE_POLLING) { + link_state = HLS_DN_POLL; + set_link_down_reason(ppd, + OPA_LINKDOWN_REASON_FM_BOUNCE, 0, + OPA_LINKDOWN_REASON_FM_BOUNCE); + } else if (phys_state == IB_PORTPHYSSTATE_DISABLED) + link_state = HLS_DN_DISABLE; + else { + pr_warn("SubnSet(OPA_PortInfo) invalid physical state 0x%x\n", + phys_state); + smp->status |= IB_SMP_INVALID_FIELD; + break; + } + + set_link_state(ppd, link_state); + if (link_state == HLS_DN_DISABLE && + (ppd->offline_disabled_reason > + OPA_LINKDOWN_REASON_SMA_DISABLED || + ppd->offline_disabled_reason == + OPA_LINKDOWN_REASON_NONE)) + ppd->offline_disabled_reason = + OPA_LINKDOWN_REASON_SMA_DISABLED; + /* + * Don't send a reply if the response would be sent + * through the disabled port. + */ + if (link_state == HLS_DN_DISABLE && smp->hop_cnt) + return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED; + break; + case IB_PORT_ARMED: + ret = set_link_state(ppd, HLS_UP_ARMED); + if ((ret == 0) && (suppress_idle_sma == 0)) + send_idle_sma(dd, SMA_IDLE_ARM); + break; + case IB_PORT_ACTIVE: + if (ppd->neighbor_normal) { + ret = set_link_state(ppd, HLS_UP_ACTIVE); + if (ret == 0) + send_idle_sma(dd, SMA_IDLE_ACTIVE); + } else { + pr_warn("SubnSet(OPA_PortInfo) Cannot move to Active with NeighborNormal 0\n"); + smp->status |= IB_SMP_INVALID_FIELD; + } + break; + default: + pr_warn("SubnSet(OPA_PortInfo) invalid logical state 0x%x\n", + logical_state); + smp->status |= IB_SMP_INVALID_FIELD; + } + + return 0; +} + +/** + * subn_set_opa_portinfo - set port information + * @smp: the incoming SM packet + * @ibdev: the infiniband device + * @port: the port on the device + * + */ +static int __subn_set_opa_portinfo(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct opa_port_info *pi = (struct opa_port_info *)data; + struct ib_event event; + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + struct hfi1_ibport *ibp; + u8 clientrereg; + unsigned long flags; + u32 smlid, opa_lid; /* tmp vars to hold LID values */ + u16 lid; + u8 ls_old, ls_new, ps_new; + u8 vls; + u8 msl; + u8 crc_enabled; + u16 lse, lwe, mtu; + u32 num_ports = OPA_AM_NPORT(am); + u32 start_of_sm_config = OPA_AM_START_SM_CFG(am); + int ret, i, invalid = 0, call_set_mtu = 0; + int call_link_downgrade_policy = 0; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + opa_lid = be32_to_cpu(pi->lid); + if (opa_lid & 0xFFFF0000) { + pr_warn("OPA_PortInfo lid out of range: %X\n", opa_lid); + smp->status |= IB_SMP_INVALID_FIELD; + goto get_only; + } + + lid = (u16)(opa_lid & 0x0000FFFF); + + smlid = be32_to_cpu(pi->sm_lid); + if (smlid & 0xFFFF0000) { + pr_warn("OPA_PortInfo SM lid out of range: %X\n", smlid); + smp->status |= IB_SMP_INVALID_FIELD; + goto get_only; + } + smlid &= 0x0000FFFF; + + clientrereg = (pi->clientrereg_subnettimeout & + OPA_PI_MASK_CLIENT_REREGISTER); + + dd = dd_from_ibdev(ibdev); + /* IB numbers ports from 1, hw from 0 */ + ppd = dd->pport + (port - 1); + ibp = &ppd->ibport_data; + event.device = ibdev; + event.element.port_num = port; + + ls_old = driver_lstate(ppd); + + ibp->mkey = pi->mkey; + ibp->gid_prefix = pi->subnet_prefix; + ibp->mkey_lease_period = be16_to_cpu(pi->mkey_lease_period); + + /* Must be a valid unicast LID address. */ + if ((lid == 0 && ls_old > IB_PORT_INIT) || + lid >= HFI1_MULTICAST_LID_BASE) { + smp->status |= IB_SMP_INVALID_FIELD; + pr_warn("SubnSet(OPA_PortInfo) lid invalid 0x%x\n", + lid); + } else if (ppd->lid != lid || + ppd->lmc != (pi->mkeyprotect_lmc & OPA_PI_MASK_LMC)) { + if (ppd->lid != lid) + hfi1_set_uevent_bits(ppd, _HFI1_EVENT_LID_CHANGE_BIT); + if (ppd->lmc != (pi->mkeyprotect_lmc & OPA_PI_MASK_LMC)) + hfi1_set_uevent_bits(ppd, _HFI1_EVENT_LMC_CHANGE_BIT); + hfi1_set_lid(ppd, lid, pi->mkeyprotect_lmc & OPA_PI_MASK_LMC); + event.event = IB_EVENT_LID_CHANGE; + ib_dispatch_event(&event); + } + + msl = pi->smsl & OPA_PI_MASK_SMSL; + if (pi->partenforce_filterraw & OPA_PI_MASK_LINKINIT_REASON) + ppd->linkinit_reason = + (pi->partenforce_filterraw & + OPA_PI_MASK_LINKINIT_REASON); + /* enable/disable SW pkey checking as per FM control */ + if (pi->partenforce_filterraw & OPA_PI_MASK_PARTITION_ENFORCE_IN) + ppd->part_enforce |= HFI1_PART_ENFORCE_IN; + else + ppd->part_enforce &= ~HFI1_PART_ENFORCE_IN; + + if (pi->partenforce_filterraw & OPA_PI_MASK_PARTITION_ENFORCE_OUT) + ppd->part_enforce |= HFI1_PART_ENFORCE_OUT; + else + ppd->part_enforce &= ~HFI1_PART_ENFORCE_OUT; + + /* Must be a valid unicast LID address. */ + if ((smlid == 0 && ls_old > IB_PORT_INIT) || + smlid >= HFI1_MULTICAST_LID_BASE) { + smp->status |= IB_SMP_INVALID_FIELD; + pr_warn("SubnSet(OPA_PortInfo) smlid invalid 0x%x\n", smlid); + } else if (smlid != ibp->sm_lid || msl != ibp->sm_sl) { + pr_warn("SubnSet(OPA_PortInfo) smlid 0x%x\n", smlid); + spin_lock_irqsave(&ibp->lock, flags); + if (ibp->sm_ah) { + if (smlid != ibp->sm_lid) + ibp->sm_ah->attr.dlid = smlid; + if (msl != ibp->sm_sl) + ibp->sm_ah->attr.sl = msl; + } + spin_unlock_irqrestore(&ibp->lock, flags); + if (smlid != ibp->sm_lid) + ibp->sm_lid = smlid; + if (msl != ibp->sm_sl) + ibp->sm_sl = msl; + event.event = IB_EVENT_SM_CHANGE; + ib_dispatch_event(&event); + } + + if (pi->link_down_reason == 0) { + ppd->local_link_down_reason.sma = 0; + ppd->local_link_down_reason.latest = 0; + } + + if (pi->neigh_link_down_reason == 0) { + ppd->neigh_link_down_reason.sma = 0; + ppd->neigh_link_down_reason.latest = 0; + } + + ppd->sm_trap_qp = be32_to_cpu(pi->sm_trap_qp); + ppd->sa_qp = be32_to_cpu(pi->sa_qp); + + ppd->port_error_action = be32_to_cpu(pi->port_error_action); + lwe = be16_to_cpu(pi->link_width.enabled); + if (lwe) { + if (lwe == OPA_LINK_WIDTH_RESET + || lwe == OPA_LINK_WIDTH_RESET_OLD) + set_link_width_enabled(ppd, ppd->link_width_supported); + else if ((lwe & ~ppd->link_width_supported) == 0) + set_link_width_enabled(ppd, lwe); + else + smp->status |= IB_SMP_INVALID_FIELD; + } + lwe = be16_to_cpu(pi->link_width_downgrade.enabled); + /* LWD.E is always applied - 0 means "disabled" */ + if (lwe == OPA_LINK_WIDTH_RESET + || lwe == OPA_LINK_WIDTH_RESET_OLD) { + set_link_width_downgrade_enabled(ppd, + ppd->link_width_downgrade_supported); + } else if ((lwe & ~ppd->link_width_downgrade_supported) == 0) { + /* only set and apply if something changed */ + if (lwe != ppd->link_width_downgrade_enabled) { + set_link_width_downgrade_enabled(ppd, lwe); + call_link_downgrade_policy = 1; + } + } else + smp->status |= IB_SMP_INVALID_FIELD; + + lse = be16_to_cpu(pi->link_speed.enabled); + if (lse) { + if (lse & be16_to_cpu(pi->link_speed.supported)) + set_link_speed_enabled(ppd, lse); + else + smp->status |= IB_SMP_INVALID_FIELD; + } + + ibp->mkeyprot = (pi->mkeyprotect_lmc & OPA_PI_MASK_MKEY_PROT_BIT) >> 6; + ibp->vl_high_limit = be16_to_cpu(pi->vl.high_limit) & 0xFF; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_VL_HIGH_LIMIT, + ibp->vl_high_limit); + + if (ppd->vls_supported/2 > ARRAY_SIZE(pi->neigh_mtu.pvlx_to_mtu) || + ppd->vls_supported > ARRAY_SIZE(dd->vld)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + for (i = 0; i < ppd->vls_supported; i++) { + if ((i % 2) == 0) + mtu = enum_to_mtu((pi->neigh_mtu.pvlx_to_mtu[i/2] >> 4) + & 0xF); + else + mtu = enum_to_mtu(pi->neigh_mtu.pvlx_to_mtu[i/2] & 0xF); + if (mtu == 0xffff) { + pr_warn("SubnSet(OPA_PortInfo) mtu invalid %d (0x%x)\n", + mtu, + (pi->neigh_mtu.pvlx_to_mtu[0] >> 4) & 0xF); + smp->status |= IB_SMP_INVALID_FIELD; + mtu = hfi1_max_mtu; /* use a valid MTU */ + } + if (dd->vld[i].mtu != mtu) { + dd_dev_info(dd, + "MTU change on vl %d from %d to %d\n", + i, dd->vld[i].mtu, mtu); + dd->vld[i].mtu = mtu; + call_set_mtu++; + } + } + /* As per OPAV1 spec: VL15 must support and be configured + * for operation with a 2048 or larger MTU. + */ + mtu = enum_to_mtu(pi->neigh_mtu.pvlx_to_mtu[15/2] & 0xF); + if (mtu < 2048 || mtu == 0xffff) + mtu = 2048; + if (dd->vld[15].mtu != mtu) { + dd_dev_info(dd, + "MTU change on vl 15 from %d to %d\n", + dd->vld[15].mtu, mtu); + dd->vld[15].mtu = mtu; + call_set_mtu++; + } + if (call_set_mtu) + set_mtu(ppd); + + /* Set operational VLs */ + vls = pi->operational_vls & OPA_PI_MASK_OPERATIONAL_VL; + if (vls) { + if (vls > ppd->vls_supported) { + pr_warn("SubnSet(OPA_PortInfo) VL's supported invalid %d\n", + pi->operational_vls); + smp->status |= IB_SMP_INVALID_FIELD; + } else { + if (hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_OP_VLS, + vls) == -EINVAL) + smp->status |= IB_SMP_INVALID_FIELD; + } + } + + if (pi->mkey_violations == 0) + ibp->mkey_violations = 0; + + if (pi->pkey_violations == 0) + ibp->pkey_violations = 0; + + if (pi->qkey_violations == 0) + ibp->qkey_violations = 0; + + ibp->subnet_timeout = + pi->clientrereg_subnettimeout & OPA_PI_MASK_SUBNET_TIMEOUT; + + crc_enabled = be16_to_cpu(pi->port_ltp_crc_mode); + crc_enabled >>= 4; + crc_enabled &= 0xf; + + if (crc_enabled != 0) + ppd->port_crc_mode_enabled = port_ltp_to_cap(crc_enabled); + + ppd->is_active_optimize_enabled = + !!(be16_to_cpu(pi->port_mode) + & OPA_PI_MASK_PORT_ACTIVE_OPTOMIZE); + + ls_new = pi->port_states.portphysstate_portstate & + OPA_PI_MASK_PORT_STATE; + ps_new = (pi->port_states.portphysstate_portstate & + OPA_PI_MASK_PORT_PHYSICAL_STATE) >> 4; + + if (ls_old == IB_PORT_INIT) { + if (start_of_sm_config) { + if (ls_new == ls_old || (ls_new == IB_PORT_ARMED)) + ppd->is_sm_config_started = 1; + } else if (ls_new == IB_PORT_ARMED) { + if (ppd->is_sm_config_started == 0) + invalid = 1; + } + } + + /* Handle CLIENT_REREGISTER event b/c SM asked us for it */ + if (clientrereg) { + event.event = IB_EVENT_CLIENT_REREGISTER; + ib_dispatch_event(&event); + } + + /* + * Do the port state change now that the other link parameters + * have been set. + * Changing the port physical state only makes sense if the link + * is down or is being set to down. + */ + + ret = set_port_states(ppd, smp, ls_new, ps_new, invalid); + if (ret) + return ret; + + ret = __subn_get_opa_portinfo(smp, am, data, ibdev, port, resp_len); + + /* restore re-reg bit per o14-12.2.1 */ + pi->clientrereg_subnettimeout |= clientrereg; + + /* + * Apply the new link downgrade policy. This may result in a link + * bounce. Do this after everything else so things are settled. + * Possible problem: if setting the port state above fails, then + * the policy change is not applied. + */ + if (call_link_downgrade_policy) + apply_link_downgrade_policy(ppd, 0); + + return ret; + +get_only: + return __subn_get_opa_portinfo(smp, am, data, ibdev, port, resp_len); +} + +/** + * set_pkeys - set the PKEY table for ctxt 0 + * @dd: the hfi1_ib device + * @port: the IB port number + * @pkeys: the PKEY table + */ +static int set_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys) +{ + struct hfi1_pportdata *ppd; + int i; + int changed = 0; + int update_includes_mgmt_partition = 0; + + /* + * IB port one/two always maps to context zero/one, + * always a kernel context, no locking needed + * If we get here with ppd setup, no need to check + * that rcd is valid. + */ + ppd = dd->pport + (port - 1); + /* + * If the update does not include the management pkey, don't do it. + */ + for (i = 0; i < ARRAY_SIZE(ppd->pkeys); i++) { + if (pkeys[i] == LIM_MGMT_P_KEY) { + update_includes_mgmt_partition = 1; + break; + } + } + + if (!update_includes_mgmt_partition) + return 1; + + for (i = 0; i < ARRAY_SIZE(ppd->pkeys); i++) { + u16 key = pkeys[i]; + u16 okey = ppd->pkeys[i]; + + if (key == okey) + continue; + /* + * The SM gives us the complete PKey table. We have + * to ensure that we put the PKeys in the matching + * slots. + */ + ppd->pkeys[i] = key; + changed = 1; + } + + if (changed) { + struct ib_event event; + + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + + event.event = IB_EVENT_PKEY_CHANGE; + event.device = &dd->verbs_dev.ibdev; + event.element.port_num = port; + ib_dispatch_event(&event); + } + return 0; +} + +static int __subn_set_opa_pkeytable(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u32 n_blocks_sent = OPA_AM_NBLK(am); + u32 start_block = am & 0x7ff; + u16 *p = (u16 *) data; + __be16 *q = (__be16 *)data; + int i; + u16 n_blocks_avail; + unsigned npkeys = hfi1_get_npkeys(dd); + + if (n_blocks_sent == 0) { + pr_warn("OPA Get PKey AM Invalid : P = %d; B = 0x%x; N = 0x%x\n", + port, start_block, n_blocks_sent); + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + n_blocks_avail = (u16)(npkeys/OPA_PARTITION_TABLE_BLK_SIZE) + 1; + + if (start_block + n_blocks_sent > n_blocks_avail || + n_blocks_sent > OPA_NUM_PKEY_BLOCKS_PER_SMP) { + pr_warn("OPA Set PKey AM Invalid : s 0x%x; req 0x%x; avail 0x%x; blk/smp 0x%lx\n", + start_block, n_blocks_sent, n_blocks_avail, + OPA_NUM_PKEY_BLOCKS_PER_SMP); + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < n_blocks_sent * OPA_PARTITION_TABLE_BLK_SIZE; i++) + p[i] = be16_to_cpu(q[i]); + + if (start_block == 0 && set_pkeys(dd, port, p) != 0) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + return __subn_get_opa_pkeytable(smp, am, data, ibdev, port, resp_len); +} + +static int get_sc2vlt_tables(struct hfi1_devdata *dd, void *data) +{ + u64 *val = (u64 *)data; + + *val++ = read_csr(dd, SEND_SC2VLT0); + *val++ = read_csr(dd, SEND_SC2VLT1); + *val++ = read_csr(dd, SEND_SC2VLT2); + *val++ = read_csr(dd, SEND_SC2VLT3); + return 0; +} + +#define ILLEGAL_VL 12 +/* + * filter_sc2vlt changes mappings to VL15 to ILLEGAL_VL (except + * for SC15, which must map to VL15). If we don't remap things this + * way it is possible for VL15 counters to increment when we try to + * send on a SC which is mapped to an invalid VL. + */ +static void filter_sc2vlt(void *data) +{ + int i; + u8 *pd = (u8 *)data; + + for (i = 0; i < OPA_MAX_SCS; i++) { + if (i == 15) + continue; + if ((pd[i] & 0x1f) == 0xf) + pd[i] = ILLEGAL_VL; + } +} + +static int set_sc2vlt_tables(struct hfi1_devdata *dd, void *data) +{ + u64 *val = (u64 *)data; + + filter_sc2vlt(data); + + write_csr(dd, SEND_SC2VLT0, *val++); + write_csr(dd, SEND_SC2VLT1, *val++); + write_csr(dd, SEND_SC2VLT2, *val++); + write_csr(dd, SEND_SC2VLT3, *val++); + write_seqlock_irq(&dd->sc2vl_lock); + memcpy(dd->sc2vl, (u64 *)data, sizeof(dd->sc2vl)); + write_sequnlock_irq(&dd->sc2vl_lock); + return 0; +} + +static int __subn_get_opa_sl_to_sc(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + u8 *p = (u8 *)data; + size_t size = ARRAY_SIZE(ibp->sl_to_sc); /* == 32 */ + unsigned i; + + if (am) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < ARRAY_SIZE(ibp->sl_to_sc); i++) + *p++ = ibp->sl_to_sc[i]; + + if (resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_sl_to_sc(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + u8 *p = (u8 *)data; + int i; + + if (am) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < ARRAY_SIZE(ibp->sl_to_sc); i++) + ibp->sl_to_sc[i] = *p++; + + return __subn_get_opa_sl_to_sc(smp, am, data, ibdev, port, resp_len); +} + +static int __subn_get_opa_sc_to_sl(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + u8 *p = (u8 *)data; + size_t size = ARRAY_SIZE(ibp->sc_to_sl); /* == 32 */ + unsigned i; + + if (am) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < ARRAY_SIZE(ibp->sc_to_sl); i++) + *p++ = ibp->sc_to_sl[i]; + + if (resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_sc_to_sl(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + u8 *p = (u8 *)data; + int i; + + if (am) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < ARRAY_SIZE(ibp->sc_to_sl); i++) + ibp->sc_to_sl[i] = *p++; + + return __subn_get_opa_sc_to_sl(smp, am, data, ibdev, port, resp_len); +} + +static int __subn_get_opa_sc_to_vlt(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 n_blocks = OPA_AM_NBLK(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + void *vp = (void *) data; + size_t size = 4 * sizeof(u64); + + if (n_blocks != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + get_sc2vlt_tables(dd, vp); + + if (resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_sc_to_vlt(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 n_blocks = OPA_AM_NBLK(am); + int async_update = OPA_AM_ASYNC(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + void *vp = (void *) data; + struct hfi1_pportdata *ppd; + int lstate; + + if (n_blocks != 1 || async_update) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + /* IB numbers ports from 1, hw from 0 */ + ppd = dd->pport + (port - 1); + lstate = driver_lstate(ppd); + /* it's known that async_update is 0 by this point, but include + * the explicit check for clarity */ + if (!async_update && + (lstate == IB_PORT_ARMED || lstate == IB_PORT_ACTIVE)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + set_sc2vlt_tables(dd, vp); + + return __subn_get_opa_sc_to_vlt(smp, am, data, ibdev, port, resp_len); +} + +static int __subn_get_opa_sc_to_vlnt(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 n_blocks = OPA_AM_NPORT(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_pportdata *ppd; + void *vp = (void *) data; + int size; + + if (n_blocks != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ppd = dd->pport + (port - 1); + + size = fm_get_table(ppd, FM_TBL_SC2VLNT, vp); + + if (resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_sc_to_vlnt(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 n_blocks = OPA_AM_NPORT(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_pportdata *ppd; + void *vp = (void *) data; + int lstate; + + if (n_blocks != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + /* IB numbers ports from 1, hw from 0 */ + ppd = dd->pport + (port - 1); + lstate = driver_lstate(ppd); + if (lstate == IB_PORT_ARMED || lstate == IB_PORT_ACTIVE) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ppd = dd->pport + (port - 1); + + fm_set_table(ppd, FM_TBL_SC2VLNT, vp); + + return __subn_get_opa_sc_to_vlnt(smp, am, data, ibdev, port, + resp_len); +} + +static int __subn_get_opa_psi(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 nports = OPA_AM_NPORT(am); + u32 start_of_sm_config = OPA_AM_START_SM_CFG(am); + u32 lstate; + struct hfi1_ibport *ibp; + struct hfi1_pportdata *ppd; + struct opa_port_state_info *psi = (struct opa_port_state_info *) data; + + if (nports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ibp = to_iport(ibdev, port); + ppd = ppd_from_ibp(ibp); + + lstate = driver_lstate(ppd); + + if (start_of_sm_config && (lstate == IB_PORT_INIT)) + ppd->is_sm_config_started = 1; + +#if PI_LED_ENABLE_SUP + psi->port_states.ledenable_offlinereason = ppd->neighbor_normal << 4; + psi->port_states.ledenable_offlinereason |= + ppd->is_sm_config_started << 5; + psi->port_states.ledenable_offlinereason |= + ppd->offline_disabled_reason & OPA_PI_MASK_OFFLINE_REASON; +#else + psi->port_states.offline_reason = ppd->neighbor_normal << 4; + psi->port_states.offline_reason |= ppd->is_sm_config_started << 5; + psi->port_states.offline_reason |= ppd->offline_disabled_reason & + OPA_PI_MASK_OFFLINE_REASON; +#endif /* PI_LED_ENABLE_SUP */ + + psi->port_states.portphysstate_portstate = + (hfi1_ibphys_portstate(ppd) << 4) | (lstate & 0xf); + psi->link_width_downgrade_tx_active = + ppd->link_width_downgrade_tx_active; + psi->link_width_downgrade_rx_active = + ppd->link_width_downgrade_rx_active; + if (resp_len) + *resp_len += sizeof(struct opa_port_state_info); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_psi(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + u32 nports = OPA_AM_NPORT(am); + u32 start_of_sm_config = OPA_AM_START_SM_CFG(am); + u32 ls_old; + u8 ls_new, ps_new; + struct hfi1_ibport *ibp; + struct hfi1_pportdata *ppd; + struct opa_port_state_info *psi = (struct opa_port_state_info *) data; + int ret, invalid = 0; + + if (nports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ibp = to_iport(ibdev, port); + ppd = ppd_from_ibp(ibp); + + ls_old = driver_lstate(ppd); + + ls_new = port_states_to_logical_state(&psi->port_states); + ps_new = port_states_to_phys_state(&psi->port_states); + + if (ls_old == IB_PORT_INIT) { + if (start_of_sm_config) { + if (ls_new == ls_old || (ls_new == IB_PORT_ARMED)) + ppd->is_sm_config_started = 1; + } else if (ls_new == IB_PORT_ARMED) { + if (ppd->is_sm_config_started == 0) + invalid = 1; + } + } + + ret = set_port_states(ppd, smp, ls_new, ps_new, invalid); + if (ret) + return ret; + + if (invalid) + smp->status |= IB_SMP_INVALID_FIELD; + + return __subn_get_opa_psi(smp, am, data, ibdev, port, resp_len); +} + +static int __subn_get_opa_cable_info(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u32 addr = OPA_AM_CI_ADDR(am); + u32 len = OPA_AM_CI_LEN(am) + 1; + int ret; + +#define __CI_PAGE_SIZE (1 << 7) /* 128 bytes */ +#define __CI_PAGE_MASK ~(__CI_PAGE_SIZE - 1) +#define __CI_PAGE_NUM(a) ((a) & __CI_PAGE_MASK) + + /* check that addr is within spec, and + * addr and (addr + len - 1) are on the same "page" */ + if (addr >= 4096 || + (__CI_PAGE_NUM(addr) != __CI_PAGE_NUM(addr + len - 1))) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ret = get_cable_info(dd, port, addr, len, data); + + if (ret == -ENODEV) { + smp->status |= IB_SMP_UNSUP_METH_ATTR; + return reply((struct ib_mad_hdr *)smp); + } + + /* The address range for the CableInfo SMA query is wider than the + * memory available on the QSFP cable. We want to return a valid + * response, albeit zeroed out, for address ranges beyond available + * memory but that are within the CableInfo query spec + */ + if (ret < 0 && ret != -ERANGE) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + if (resp_len) + *resp_len += len; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_get_opa_bct(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + u32 num_ports = OPA_AM_NPORT(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_pportdata *ppd; + struct buffer_control *p = (struct buffer_control *) data; + int size; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + ppd = dd->pport + (port - 1); + size = fm_get_table(ppd, FM_TBL_BUFFER_CONTROL, p); + trace_bct_get(dd, p); + if (resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_bct(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + u32 num_ports = OPA_AM_NPORT(am); + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_pportdata *ppd; + struct buffer_control *p = (struct buffer_control *) data; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + ppd = dd->pport + (port - 1); + trace_bct_set(dd, p); + if (fm_set_table(ppd, FM_TBL_BUFFER_CONTROL, p) < 0) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + return __subn_get_opa_bct(smp, am, data, ibdev, port, resp_len); +} + +static int __subn_get_opa_vl_arb(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(to_iport(ibdev, port)); + u32 num_ports = OPA_AM_NPORT(am); + u8 section = (am & 0x00ff0000) >> 16; + u8 *p = data; + int size = 0; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + switch (section) { + case OPA_VLARB_LOW_ELEMENTS: + size = fm_get_table(ppd, FM_TBL_VL_LOW_ARB, p); + break; + case OPA_VLARB_HIGH_ELEMENTS: + size = fm_get_table(ppd, FM_TBL_VL_HIGH_ARB, p); + break; + case OPA_VLARB_PREEMPT_ELEMENTS: + size = fm_get_table(ppd, FM_TBL_VL_PREEMPT_ELEMS, p); + break; + case OPA_VLARB_PREEMPT_MATRIX: + size = fm_get_table(ppd, FM_TBL_VL_PREEMPT_MATRIX, p); + break; + default: + pr_warn("OPA SubnGet(VL Arb) AM Invalid : 0x%x\n", + be32_to_cpu(smp->attr_mod)); + smp->status |= IB_SMP_INVALID_FIELD; + break; + } + + if (size > 0 && resp_len) + *resp_len += size; + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_vl_arb(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(to_iport(ibdev, port)); + u32 num_ports = OPA_AM_NPORT(am); + u8 section = (am & 0x00ff0000) >> 16; + u8 *p = data; + + if (num_ports != 1) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + switch (section) { + case OPA_VLARB_LOW_ELEMENTS: + (void) fm_set_table(ppd, FM_TBL_VL_LOW_ARB, p); + break; + case OPA_VLARB_HIGH_ELEMENTS: + (void) fm_set_table(ppd, FM_TBL_VL_HIGH_ARB, p); + break; + /* neither OPA_VLARB_PREEMPT_ELEMENTS, or OPA_VLARB_PREEMPT_MATRIX + * can be changed from the default values */ + case OPA_VLARB_PREEMPT_ELEMENTS: + /* FALLTHROUGH */ + case OPA_VLARB_PREEMPT_MATRIX: + smp->status |= IB_SMP_UNSUP_METH_ATTR; + break; + default: + pr_warn("OPA SubnSet(VL Arb) AM Invalid : 0x%x\n", + be32_to_cpu(smp->attr_mod)); + smp->status |= IB_SMP_INVALID_FIELD; + break; + } + + return __subn_get_opa_vl_arb(smp, am, data, ibdev, port, resp_len); +} + +struct opa_pma_mad { + struct ib_mad_hdr mad_hdr; + u8 data[2024]; +} __packed; + +struct opa_class_port_info { + u8 base_version; + u8 class_version; + __be16 cap_mask; + __be32 cap_mask2_resp_time; + + u8 redirect_gid[16]; + __be32 redirect_tc_fl; + __be32 redirect_lid; + __be32 redirect_sl_qp; + __be32 redirect_qkey; + + u8 trap_gid[16]; + __be32 trap_tc_fl; + __be32 trap_lid; + __be32 trap_hl_qp; + __be32 trap_qkey; + + __be16 trap_pkey; + __be16 redirect_pkey; + + u8 trap_sl_rsvd; + u8 reserved[3]; +} __packed; + +struct opa_port_status_req { + __u8 port_num; + __u8 reserved[3]; + __be32 vl_select_mask; +}; + +#define VL_MASK_ALL 0x000080ff + +struct opa_port_status_rsp { + __u8 port_num; + __u8 reserved[3]; + __be32 vl_select_mask; + + /* Data counters */ + __be64 port_xmit_data; + __be64 port_rcv_data; + __be64 port_xmit_pkts; + __be64 port_rcv_pkts; + __be64 port_multicast_xmit_pkts; + __be64 port_multicast_rcv_pkts; + __be64 port_xmit_wait; + __be64 sw_port_congestion; + __be64 port_rcv_fecn; + __be64 port_rcv_becn; + __be64 port_xmit_time_cong; + __be64 port_xmit_wasted_bw; + __be64 port_xmit_wait_data; + __be64 port_rcv_bubble; + __be64 port_mark_fecn; + /* Error counters */ + __be64 port_rcv_constraint_errors; + __be64 port_rcv_switch_relay_errors; + __be64 port_xmit_discards; + __be64 port_xmit_constraint_errors; + __be64 port_rcv_remote_physical_errors; + __be64 local_link_integrity_errors; + __be64 port_rcv_errors; + __be64 excessive_buffer_overruns; + __be64 fm_config_errors; + __be32 link_error_recovery; + __be32 link_downed; + u8 uncorrectable_errors; + + u8 link_quality_indicator; /* 5res, 3bit */ + u8 res2[6]; + struct _vls_pctrs { + /* per-VL Data counters */ + __be64 port_vl_xmit_data; + __be64 port_vl_rcv_data; + __be64 port_vl_xmit_pkts; + __be64 port_vl_rcv_pkts; + __be64 port_vl_xmit_wait; + __be64 sw_port_vl_congestion; + __be64 port_vl_rcv_fecn; + __be64 port_vl_rcv_becn; + __be64 port_xmit_time_cong; + __be64 port_vl_xmit_wasted_bw; + __be64 port_vl_xmit_wait_data; + __be64 port_vl_rcv_bubble; + __be64 port_vl_mark_fecn; + __be64 port_vl_xmit_discards; + } vls[0]; /* real array size defined by # bits set in vl_select_mask */ +}; + +enum counter_selects { + CS_PORT_XMIT_DATA = (1 << 31), + CS_PORT_RCV_DATA = (1 << 30), + CS_PORT_XMIT_PKTS = (1 << 29), + CS_PORT_RCV_PKTS = (1 << 28), + CS_PORT_MCAST_XMIT_PKTS = (1 << 27), + CS_PORT_MCAST_RCV_PKTS = (1 << 26), + CS_PORT_XMIT_WAIT = (1 << 25), + CS_SW_PORT_CONGESTION = (1 << 24), + CS_PORT_RCV_FECN = (1 << 23), + CS_PORT_RCV_BECN = (1 << 22), + CS_PORT_XMIT_TIME_CONG = (1 << 21), + CS_PORT_XMIT_WASTED_BW = (1 << 20), + CS_PORT_XMIT_WAIT_DATA = (1 << 19), + CS_PORT_RCV_BUBBLE = (1 << 18), + CS_PORT_MARK_FECN = (1 << 17), + CS_PORT_RCV_CONSTRAINT_ERRORS = (1 << 16), + CS_PORT_RCV_SWITCH_RELAY_ERRORS = (1 << 15), + CS_PORT_XMIT_DISCARDS = (1 << 14), + CS_PORT_XMIT_CONSTRAINT_ERRORS = (1 << 13), + CS_PORT_RCV_REMOTE_PHYSICAL_ERRORS = (1 << 12), + CS_LOCAL_LINK_INTEGRITY_ERRORS = (1 << 11), + CS_PORT_RCV_ERRORS = (1 << 10), + CS_EXCESSIVE_BUFFER_OVERRUNS = (1 << 9), + CS_FM_CONFIG_ERRORS = (1 << 8), + CS_LINK_ERROR_RECOVERY = (1 << 7), + CS_LINK_DOWNED = (1 << 6), + CS_UNCORRECTABLE_ERRORS = (1 << 5), +}; + +struct opa_clear_port_status { + __be64 port_select_mask[4]; + __be32 counter_select_mask; +}; + +struct opa_aggregate { + __be16 attr_id; + __be16 err_reqlength; /* 1 bit, 8 res, 7 bit */ + __be32 attr_mod; + u8 data[0]; +}; + +/* Request contains first two fields, response contains those plus the rest */ +struct opa_port_data_counters_msg { + __be64 port_select_mask[4]; + __be32 vl_select_mask; + + /* Response fields follow */ + __be32 reserved1; + struct _port_dctrs { + u8 port_number; + u8 reserved2[3]; + __be32 link_quality_indicator; /* 29res, 3bit */ + + /* Data counters */ + __be64 port_xmit_data; + __be64 port_rcv_data; + __be64 port_xmit_pkts; + __be64 port_rcv_pkts; + __be64 port_multicast_xmit_pkts; + __be64 port_multicast_rcv_pkts; + __be64 port_xmit_wait; + __be64 sw_port_congestion; + __be64 port_rcv_fecn; + __be64 port_rcv_becn; + __be64 port_xmit_time_cong; + __be64 port_xmit_wasted_bw; + __be64 port_xmit_wait_data; + __be64 port_rcv_bubble; + __be64 port_mark_fecn; + + __be64 port_error_counter_summary; + /* Sum of error counts/port */ + + struct _vls_dctrs { + /* per-VL Data counters */ + __be64 port_vl_xmit_data; + __be64 port_vl_rcv_data; + __be64 port_vl_xmit_pkts; + __be64 port_vl_rcv_pkts; + __be64 port_vl_xmit_wait; + __be64 sw_port_vl_congestion; + __be64 port_vl_rcv_fecn; + __be64 port_vl_rcv_becn; + __be64 port_xmit_time_cong; + __be64 port_vl_xmit_wasted_bw; + __be64 port_vl_xmit_wait_data; + __be64 port_vl_rcv_bubble; + __be64 port_vl_mark_fecn; + } vls[0]; + /* array size defined by #bits set in vl_select_mask*/ + } port[1]; /* array size defined by #ports in attribute modifier */ +}; + +struct opa_port_error_counters64_msg { + /* Request contains first two fields, response contains the + * whole magilla */ + __be64 port_select_mask[4]; + __be32 vl_select_mask; + + /* Response-only fields follow */ + __be32 reserved1; + struct _port_ectrs { + u8 port_number; + u8 reserved2[7]; + __be64 port_rcv_constraint_errors; + __be64 port_rcv_switch_relay_errors; + __be64 port_xmit_discards; + __be64 port_xmit_constraint_errors; + __be64 port_rcv_remote_physical_errors; + __be64 local_link_integrity_errors; + __be64 port_rcv_errors; + __be64 excessive_buffer_overruns; + __be64 fm_config_errors; + __be32 link_error_recovery; + __be32 link_downed; + u8 uncorrectable_errors; + u8 reserved3[7]; + struct _vls_ectrs { + __be64 port_vl_xmit_discards; + } vls[0]; + /* array size defined by #bits set in vl_select_mask */ + } port[1]; /* array size defined by #ports in attribute modifier */ +}; + +struct opa_port_error_info_msg { + __be64 port_select_mask[4]; + __be32 error_info_select_mask; + __be32 reserved1; + struct _port_ei { + + u8 port_number; + u8 reserved2[7]; + + /* PortRcvErrorInfo */ + struct { + u8 status_and_code; + union { + u8 raw[17]; + struct { + /* EI1to12 format */ + u8 packet_flit1[8]; + u8 packet_flit2[8]; + u8 remaining_flit_bits12; + } ei1to12; + struct { + u8 packet_bytes[8]; + u8 remaining_flit_bits; + } ei13; + } ei; + u8 reserved3[6]; + } __packed port_rcv_ei; + + /* ExcessiveBufferOverrunInfo */ + struct { + u8 status_and_sc; + u8 reserved4[7]; + } __packed excessive_buffer_overrun_ei; + + /* PortXmitConstraintErrorInfo */ + struct { + u8 status; + u8 reserved5; + __be16 pkey; + __be32 slid; + } __packed port_xmit_constraint_ei; + + /* PortRcvConstraintErrorInfo */ + struct { + u8 status; + u8 reserved6; + __be16 pkey; + __be32 slid; + } __packed port_rcv_constraint_ei; + + /* PortRcvSwitchRelayErrorInfo */ + struct { + u8 status_and_code; + u8 reserved7[3]; + __u32 error_info; + } __packed port_rcv_switch_relay_ei; + + /* UncorrectableErrorInfo */ + struct { + u8 status_and_code; + u8 reserved8; + } __packed uncorrectable_ei; + + /* FMConfigErrorInfo */ + struct { + u8 status_and_code; + u8 error_info; + } __packed fm_config_ei; + __u32 reserved9; + } port[1]; /* actual array size defined by #ports in attr modifier */ +}; + +/* opa_port_error_info_msg error_info_select_mask bit definitions */ +enum error_info_selects { + ES_PORT_RCV_ERROR_INFO = (1 << 31), + ES_EXCESSIVE_BUFFER_OVERRUN_INFO = (1 << 30), + ES_PORT_XMIT_CONSTRAINT_ERROR_INFO = (1 << 29), + ES_PORT_RCV_CONSTRAINT_ERROR_INFO = (1 << 28), + ES_PORT_RCV_SWITCH_RELAY_ERROR_INFO = (1 << 27), + ES_UNCORRECTABLE_ERROR_INFO = (1 << 26), + ES_FM_CONFIG_ERROR_INFO = (1 << 25) +}; + +static int pma_get_opa_classportinfo(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u32 *resp_len) +{ + struct opa_class_port_info *p = + (struct opa_class_port_info *)pmp->data; + + memset(pmp->data, 0, sizeof(pmp->data)); + + if (pmp->mad_hdr.attr_mod != 0) + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + + p->base_version = OPA_MGMT_BASE_VERSION; + p->class_version = OPA_SMI_CLASS_VERSION; + /* + * Expected response time is 4.096 usec. * 2^18 == 1.073741824 sec. + */ + p->cap_mask2_resp_time = cpu_to_be32(18); + + if (resp_len) + *resp_len += sizeof(*p); + + return reply((struct ib_mad_hdr *)pmp); +} + +static void a0_portstatus(struct hfi1_pportdata *ppd, + struct opa_port_status_rsp *rsp, u32 vl_select_mask) +{ + if (!is_bx(ppd->dd)) { + unsigned long vl; + int vfi = 0; + u64 max_vl_xmit_wait = 0, tmp; + u32 vl_all_mask = VL_MASK_ALL; + u64 rcv_data, rcv_bubble; + + rcv_data = be64_to_cpu(rsp->port_rcv_data); + rcv_bubble = be64_to_cpu(rsp->port_rcv_bubble); + /* In the measured time period, calculate the total number + * of flits that were received. Subtract out one false + * rcv_bubble increment for every 32 received flits but + * don't let the number go negative. + */ + if (rcv_bubble >= (rcv_data>>5)) { + rcv_bubble -= (rcv_data>>5); + rsp->port_rcv_bubble = cpu_to_be64(rcv_bubble); + } + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(vl_select_mask)) { + rcv_data = be64_to_cpu(rsp->vls[vfi].port_vl_rcv_data); + rcv_bubble = + be64_to_cpu(rsp->vls[vfi].port_vl_rcv_bubble); + if (rcv_bubble >= (rcv_data>>5)) { + rcv_bubble -= (rcv_data>>5); + rsp->vls[vfi].port_vl_rcv_bubble = + cpu_to_be64(rcv_bubble); + } + vfi++; + } + + for_each_set_bit(vl, (unsigned long *)&(vl_all_mask), + 8 * sizeof(vl_all_mask)) { + tmp = read_port_cntr(ppd, C_TX_WAIT_VL, + idx_from_vl(vl)); + if (tmp > max_vl_xmit_wait) + max_vl_xmit_wait = tmp; + } + rsp->port_xmit_wait = cpu_to_be64(max_vl_xmit_wait); + } +} + + +static int pma_get_opa_portstatus(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + struct opa_port_status_req *req = + (struct opa_port_status_req *)pmp->data; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct opa_port_status_rsp *rsp; + u32 vl_select_mask = be32_to_cpu(req->vl_select_mask); + unsigned long vl; + size_t response_data_size; + u32 nports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24; + u8 port_num = req->port_num; + u8 num_vls = hweight32(vl_select_mask); + struct _vls_pctrs *vlinfo; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + int vfi; + u64 tmp, tmp2; + + response_data_size = sizeof(struct opa_port_status_rsp) + + num_vls * sizeof(struct _vls_pctrs); + if (response_data_size > sizeof(pmp->data)) { + pmp->mad_hdr.status |= OPA_PM_STATUS_REQUEST_TOO_LARGE; + return reply((struct ib_mad_hdr *)pmp); + } + + if (nports != 1 || (port_num && port_num != port) + || num_vls > OPA_MAX_VLS || (vl_select_mask & ~VL_MASK_ALL)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + memset(pmp->data, 0, sizeof(pmp->data)); + + rsp = (struct opa_port_status_rsp *)pmp->data; + if (port_num) + rsp->port_num = port_num; + else + rsp->port_num = port; + + rsp->port_rcv_constraint_errors = + cpu_to_be64(read_port_cntr(ppd, C_SW_RCV_CSTR_ERR, + CNTR_INVALID_VL)); + + hfi1_read_link_quality(dd, &rsp->link_quality_indicator); + + rsp->vl_select_mask = cpu_to_be32(vl_select_mask); + rsp->port_xmit_data = cpu_to_be64(read_dev_cntr(dd, C_DC_XMIT_FLITS, + CNTR_INVALID_VL)); + rsp->port_rcv_data = cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FLITS, + CNTR_INVALID_VL)); + rsp->port_rcv_bubble = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BBL, CNTR_INVALID_VL)); + rsp->port_xmit_pkts = cpu_to_be64(read_dev_cntr(dd, C_DC_XMIT_PKTS, + CNTR_INVALID_VL)); + rsp->port_rcv_pkts = cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_PKTS, + CNTR_INVALID_VL)); + rsp->port_multicast_xmit_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_MC_XMIT_PKTS, + CNTR_INVALID_VL)); + rsp->port_multicast_rcv_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_MC_RCV_PKTS, + CNTR_INVALID_VL)); + rsp->port_xmit_wait = + cpu_to_be64(read_port_cntr(ppd, C_TX_WAIT, CNTR_INVALID_VL)); + rsp->port_rcv_fecn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FCN, CNTR_INVALID_VL)); + rsp->port_rcv_becn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BCN, CNTR_INVALID_VL)); + rsp->port_xmit_discards = + cpu_to_be64(read_port_cntr(ppd, C_SW_XMIT_DSCD, + CNTR_INVALID_VL)); + rsp->port_xmit_constraint_errors = + cpu_to_be64(read_port_cntr(ppd, C_SW_XMIT_CSTR_ERR, + CNTR_INVALID_VL)); + rsp->port_rcv_remote_physical_errors = + cpu_to_be64(read_dev_cntr(dd, C_DC_RMT_PHY_ERR, + CNTR_INVALID_VL)); + tmp = read_dev_cntr(dd, C_DC_RX_REPLAY, CNTR_INVALID_VL); + tmp2 = tmp + read_dev_cntr(dd, C_DC_TX_REPLAY, CNTR_INVALID_VL); + if (tmp2 < tmp) { + /* overflow/wrapped */ + rsp->local_link_integrity_errors = cpu_to_be64(~0); + } else { + rsp->local_link_integrity_errors = cpu_to_be64(tmp2); + } + tmp = read_dev_cntr(dd, C_DC_SEQ_CRC_CNT, CNTR_INVALID_VL); + tmp2 = tmp + read_dev_cntr(dd, C_DC_REINIT_FROM_PEER_CNT, + CNTR_INVALID_VL); + if (tmp2 > (u32)UINT_MAX || tmp2 < tmp) { + /* overflow/wrapped */ + rsp->link_error_recovery = cpu_to_be32(~0); + } else { + rsp->link_error_recovery = cpu_to_be32(tmp2); + } + rsp->port_rcv_errors = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_ERR, CNTR_INVALID_VL)); + rsp->excessive_buffer_overruns = + cpu_to_be64(read_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL)); + rsp->fm_config_errors = + cpu_to_be64(read_dev_cntr(dd, C_DC_FM_CFG_ERR, + CNTR_INVALID_VL)); + rsp->link_downed = cpu_to_be32(read_port_cntr(ppd, C_SW_LINK_DOWN, + CNTR_INVALID_VL)); + + /* rsp->uncorrectable_errors is 8 bits wide, and it pegs at 0xff */ + tmp = read_dev_cntr(dd, C_DC_UNC_ERR, CNTR_INVALID_VL); + rsp->uncorrectable_errors = tmp < 0x100 ? (tmp & 0xff) : 0xff; + + vlinfo = &(rsp->vls[0]); + vfi = 0; + /* The vl_select_mask has been checked above, and we know + * that it contains only entries which represent valid VLs. + * So in the for_each_set_bit() loop below, we don't need + * any additional checks for vl. + */ + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(vl_select_mask)) { + memset(vlinfo, 0, sizeof(*vlinfo)); + + tmp = read_dev_cntr(dd, C_DC_RX_FLIT_VL, idx_from_vl(vl)); + rsp->vls[vfi].port_vl_rcv_data = cpu_to_be64(tmp); + rsp->vls[vfi].port_vl_rcv_bubble = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BBL_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_RX_PKT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_xmit_data = + cpu_to_be64(read_port_cntr(ppd, C_TX_FLIT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_xmit_pkts = + cpu_to_be64(read_port_cntr(ppd, C_TX_PKT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_xmit_wait = + cpu_to_be64(read_port_cntr(ppd, C_TX_WAIT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_fecn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FCN_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_becn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BCN_VL, + idx_from_vl(vl))); + + vlinfo++; + vfi++; + } + + a0_portstatus(ppd, rsp, vl_select_mask); + + if (resp_len) + *resp_len += response_data_size; + + return reply((struct ib_mad_hdr *)pmp); +} + +static u64 get_error_counter_summary(struct ib_device *ibdev, u8 port) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u64 error_counter_summary = 0, tmp; + + error_counter_summary += read_port_cntr(ppd, C_SW_RCV_CSTR_ERR, + CNTR_INVALID_VL); + /* port_rcv_switch_relay_errors is 0 for HFIs */ + error_counter_summary += read_port_cntr(ppd, C_SW_XMIT_DSCD, + CNTR_INVALID_VL); + error_counter_summary += read_port_cntr(ppd, C_SW_XMIT_CSTR_ERR, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_RMT_PHY_ERR, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_TX_REPLAY, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_RX_REPLAY, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_SEQ_CRC_CNT, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_REINIT_FROM_PEER_CNT, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_RCV_ERR, + CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL); + error_counter_summary += read_dev_cntr(dd, C_DC_FM_CFG_ERR, + CNTR_INVALID_VL); + /* ppd->link_downed is a 32-bit value */ + error_counter_summary += read_port_cntr(ppd, C_SW_LINK_DOWN, + CNTR_INVALID_VL); + tmp = read_dev_cntr(dd, C_DC_UNC_ERR, CNTR_INVALID_VL); + /* this is an 8-bit quantity */ + error_counter_summary += tmp < 0x100 ? (tmp & 0xff) : 0xff; + + return error_counter_summary; +} + +static void a0_datacounters(struct hfi1_devdata *dd, struct _port_dctrs *rsp, + u32 vl_select_mask) +{ + if (!is_bx(dd)) { + unsigned long vl; + int vfi = 0; + u64 rcv_data, rcv_bubble, sum_vl_xmit_wait = 0; + + rcv_data = be64_to_cpu(rsp->port_rcv_data); + rcv_bubble = be64_to_cpu(rsp->port_rcv_bubble); + /* In the measured time period, calculate the total number + * of flits that were received. Subtract out one false + * rcv_bubble increment for every 32 received flits but + * don't let the number go negative. + */ + if (rcv_bubble >= (rcv_data>>5)) { + rcv_bubble -= (rcv_data>>5); + rsp->port_rcv_bubble = cpu_to_be64(rcv_bubble); + } + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(vl_select_mask)) { + rcv_data = be64_to_cpu(rsp->vls[vfi].port_vl_rcv_data); + rcv_bubble = + be64_to_cpu(rsp->vls[vfi].port_vl_rcv_bubble); + if (rcv_bubble >= (rcv_data>>5)) { + rcv_bubble -= (rcv_data>>5); + rsp->vls[vfi].port_vl_rcv_bubble = + cpu_to_be64(rcv_bubble); + } + vfi++; + } + vfi = 0; + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(vl_select_mask)) { + u64 tmp = sum_vl_xmit_wait + + be64_to_cpu(rsp->vls[vfi++].port_vl_xmit_wait); + if (tmp < sum_vl_xmit_wait) { + /* we wrapped */ + sum_vl_xmit_wait = (u64) ~0; + break; + } + sum_vl_xmit_wait = tmp; + } + if (be64_to_cpu(rsp->port_xmit_wait) > sum_vl_xmit_wait) + rsp->port_xmit_wait = cpu_to_be64(sum_vl_xmit_wait); + } +} + +static int pma_get_opa_datacounters(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + struct opa_port_data_counters_msg *req = + (struct opa_port_data_counters_msg *)pmp->data; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct _port_dctrs *rsp; + struct _vls_dctrs *vlinfo; + size_t response_data_size; + u32 num_ports; + u8 num_pslm; + u8 lq, num_vls; + u64 port_mask; + unsigned long port_num; + unsigned long vl; + u32 vl_select_mask; + int vfi; + + num_ports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24; + num_pslm = hweight64(be64_to_cpu(req->port_select_mask[3])); + num_vls = hweight32(be32_to_cpu(req->vl_select_mask)); + vl_select_mask = be32_to_cpu(req->vl_select_mask); + + if (num_ports != 1 || (vl_select_mask & ~VL_MASK_ALL)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* Sanity check */ + response_data_size = sizeof(struct opa_port_data_counters_msg) + + num_vls * sizeof(struct _vls_dctrs); + + if (response_data_size > sizeof(pmp->data)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* + * The bit set in the mask needs to be consistent with the + * port the request came in on. + */ + port_mask = be64_to_cpu(req->port_select_mask[3]); + port_num = find_first_bit((unsigned long *)&port_mask, + sizeof(port_mask)); + + if ((u8)port_num != port) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + rsp = (struct _port_dctrs *)&(req->port[0]); + memset(rsp, 0, sizeof(*rsp)); + + rsp->port_number = port; + /* + * Note that link_quality_indicator is a 32 bit quantity in + * 'datacounters' queries (as opposed to 'portinfo' queries, + * where it's a byte). + */ + hfi1_read_link_quality(dd, &lq); + rsp->link_quality_indicator = cpu_to_be32((u32)lq); + + /* rsp->sw_port_congestion is 0 for HFIs */ + /* rsp->port_xmit_time_cong is 0 for HFIs */ + /* rsp->port_xmit_wasted_bw ??? */ + /* rsp->port_xmit_wait_data ??? */ + /* rsp->port_mark_fecn is 0 for HFIs */ + + rsp->port_xmit_data = cpu_to_be64(read_dev_cntr(dd, C_DC_XMIT_FLITS, + CNTR_INVALID_VL)); + rsp->port_rcv_data = cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FLITS, + CNTR_INVALID_VL)); + rsp->port_rcv_bubble = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BBL, CNTR_INVALID_VL)); + rsp->port_xmit_pkts = cpu_to_be64(read_dev_cntr(dd, C_DC_XMIT_PKTS, + CNTR_INVALID_VL)); + rsp->port_rcv_pkts = cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_PKTS, + CNTR_INVALID_VL)); + rsp->port_multicast_xmit_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_MC_XMIT_PKTS, + CNTR_INVALID_VL)); + rsp->port_multicast_rcv_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_MC_RCV_PKTS, + CNTR_INVALID_VL)); + rsp->port_xmit_wait = + cpu_to_be64(read_port_cntr(ppd, C_TX_WAIT, CNTR_INVALID_VL)); + rsp->port_rcv_fecn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FCN, CNTR_INVALID_VL)); + rsp->port_rcv_becn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BCN, CNTR_INVALID_VL)); + + rsp->port_error_counter_summary = + cpu_to_be64(get_error_counter_summary(ibdev, port)); + + vlinfo = &(rsp->vls[0]); + vfi = 0; + /* The vl_select_mask has been checked above, and we know + * that it contains only entries which represent valid VLs. + * So in the for_each_set_bit() loop below, we don't need + * any additional checks for vl. + */ + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(req->vl_select_mask)) { + memset(vlinfo, 0, sizeof(*vlinfo)); + + rsp->vls[vfi].port_vl_xmit_data = + cpu_to_be64(read_port_cntr(ppd, C_TX_FLIT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_data = + cpu_to_be64(read_dev_cntr(dd, C_DC_RX_FLIT_VL, + idx_from_vl(vl))); + rsp->vls[vfi].port_vl_rcv_bubble = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BBL_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_xmit_pkts = + cpu_to_be64(read_port_cntr(ppd, C_TX_PKT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_pkts = + cpu_to_be64(read_dev_cntr(dd, C_DC_RX_PKT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_xmit_wait = + cpu_to_be64(read_port_cntr(ppd, C_TX_WAIT_VL, + idx_from_vl(vl))); + + rsp->vls[vfi].port_vl_rcv_fecn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FCN_VL, + idx_from_vl(vl))); + rsp->vls[vfi].port_vl_rcv_becn = + cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_BCN_VL, + idx_from_vl(vl))); + + /* rsp->port_vl_xmit_time_cong is 0 for HFIs */ + /* rsp->port_vl_xmit_wasted_bw ??? */ + /* port_vl_xmit_wait_data - TXE (table 13-9 HFI spec) ??? + * does this differ from rsp->vls[vfi].port_vl_xmit_wait */ + /*rsp->vls[vfi].port_vl_mark_fecn = + cpu_to_be64(read_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT + + offset)); + */ + vlinfo++; + vfi++; + } + + a0_datacounters(dd, rsp, vl_select_mask); + + if (resp_len) + *resp_len += response_data_size; + + return reply((struct ib_mad_hdr *)pmp); +} + +static int pma_get_opa_porterrors(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + size_t response_data_size; + struct _port_ectrs *rsp; + unsigned long port_num; + struct opa_port_error_counters64_msg *req; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u32 num_ports; + u8 num_pslm; + u8 num_vls; + struct hfi1_ibport *ibp; + struct hfi1_pportdata *ppd; + struct _vls_ectrs *vlinfo; + unsigned long vl; + u64 port_mask, tmp, tmp2; + u32 vl_select_mask; + int vfi; + + req = (struct opa_port_error_counters64_msg *)pmp->data; + + num_ports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24; + + num_pslm = hweight64(be64_to_cpu(req->port_select_mask[3])); + num_vls = hweight32(be32_to_cpu(req->vl_select_mask)); + + if (num_ports != 1 || num_ports != num_pslm) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + response_data_size = sizeof(struct opa_port_error_counters64_msg) + + num_vls * sizeof(struct _vls_ectrs); + + if (response_data_size > sizeof(pmp->data)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + /* + * The bit set in the mask needs to be consistent with the + * port the request came in on. + */ + port_mask = be64_to_cpu(req->port_select_mask[3]); + port_num = find_first_bit((unsigned long *)&port_mask, + sizeof(port_mask)); + + if ((u8)port_num != port) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + rsp = (struct _port_ectrs *)&(req->port[0]); + + ibp = to_iport(ibdev, port_num); + ppd = ppd_from_ibp(ibp); + + memset(rsp, 0, sizeof(*rsp)); + rsp->port_number = (u8)port_num; + + rsp->port_rcv_constraint_errors = + cpu_to_be64(read_port_cntr(ppd, C_SW_RCV_CSTR_ERR, + CNTR_INVALID_VL)); + /* port_rcv_switch_relay_errors is 0 for HFIs */ + rsp->port_xmit_discards = + cpu_to_be64(read_port_cntr(ppd, C_SW_XMIT_DSCD, + CNTR_INVALID_VL)); + rsp->port_rcv_remote_physical_errors = + cpu_to_be64(read_dev_cntr(dd, C_DC_RMT_PHY_ERR, + CNTR_INVALID_VL)); + tmp = read_dev_cntr(dd, C_DC_RX_REPLAY, CNTR_INVALID_VL); + tmp2 = tmp + read_dev_cntr(dd, C_DC_TX_REPLAY, CNTR_INVALID_VL); + if (tmp2 < tmp) { + /* overflow/wrapped */ + rsp->local_link_integrity_errors = cpu_to_be64(~0); + } else { + rsp->local_link_integrity_errors = cpu_to_be64(tmp2); + } + tmp = read_dev_cntr(dd, C_DC_SEQ_CRC_CNT, CNTR_INVALID_VL); + tmp2 = tmp + read_dev_cntr(dd, C_DC_REINIT_FROM_PEER_CNT, + CNTR_INVALID_VL); + if (tmp2 > (u32)UINT_MAX || tmp2 < tmp) { + /* overflow/wrapped */ + rsp->link_error_recovery = cpu_to_be32(~0); + } else { + rsp->link_error_recovery = cpu_to_be32(tmp2); + } + rsp->port_xmit_constraint_errors = + cpu_to_be64(read_port_cntr(ppd, C_SW_XMIT_CSTR_ERR, + CNTR_INVALID_VL)); + rsp->excessive_buffer_overruns = + cpu_to_be64(read_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL)); + rsp->fm_config_errors = + cpu_to_be64(read_dev_cntr(dd, C_DC_FM_CFG_ERR, + CNTR_INVALID_VL)); + rsp->link_downed = cpu_to_be32(read_port_cntr(ppd, C_SW_LINK_DOWN, + CNTR_INVALID_VL)); + tmp = read_dev_cntr(dd, C_DC_UNC_ERR, CNTR_INVALID_VL); + rsp->uncorrectable_errors = tmp < 0x100 ? (tmp & 0xff) : 0xff; + + vlinfo = (struct _vls_ectrs *)&(rsp->vls[0]); + vfi = 0; + vl_select_mask = be32_to_cpu(req->vl_select_mask); + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(req->vl_select_mask)) { + memset(vlinfo, 0, sizeof(*vlinfo)); + /* vlinfo->vls[vfi].port_vl_xmit_discards ??? */ + vlinfo += 1; + vfi++; + } + + if (resp_len) + *resp_len += response_data_size; + + return reply((struct ib_mad_hdr *)pmp); +} + +static int pma_get_opa_errorinfo(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + size_t response_data_size; + struct _port_ei *rsp; + struct opa_port_error_info_msg *req; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u64 port_mask; + u32 num_ports; + unsigned long port_num; + u8 num_pslm; + u64 reg; + + req = (struct opa_port_error_info_msg *)pmp->data; + rsp = (struct _port_ei *)&(req->port[0]); + + num_ports = OPA_AM_NPORT(be32_to_cpu(pmp->mad_hdr.attr_mod)); + num_pslm = hweight64(be64_to_cpu(req->port_select_mask[3])); + + memset(rsp, 0, sizeof(*rsp)); + + if (num_ports != 1 || num_ports != num_pslm) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* Sanity check */ + response_data_size = sizeof(struct opa_port_error_info_msg); + + if (response_data_size > sizeof(pmp->data)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* + * The bit set in the mask needs to be consistent with the port + * the request came in on. + */ + port_mask = be64_to_cpu(req->port_select_mask[3]); + port_num = find_first_bit((unsigned long *)&port_mask, + sizeof(port_mask)); + + if ((u8)port_num != port) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* PortRcvErrorInfo */ + rsp->port_rcv_ei.status_and_code = + dd->err_info_rcvport.status_and_code; + memcpy(&rsp->port_rcv_ei.ei.ei1to12.packet_flit1, + &dd->err_info_rcvport.packet_flit1, sizeof(u64)); + memcpy(&rsp->port_rcv_ei.ei.ei1to12.packet_flit2, + &dd->err_info_rcvport.packet_flit2, sizeof(u64)); + + /* ExcessiverBufferOverrunInfo */ + reg = read_csr(dd, RCV_ERR_INFO); + if (reg & RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK) { + /* if the RcvExcessBufferOverrun bit is set, save SC of + * first pkt that encountered an excess buffer overrun */ + u8 tmp = (u8)reg; + + tmp &= RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SC_SMASK; + tmp <<= 2; + rsp->excessive_buffer_overrun_ei.status_and_sc = tmp; + /* set the status bit */ + rsp->excessive_buffer_overrun_ei.status_and_sc |= 0x80; + } + + rsp->port_xmit_constraint_ei.status = + dd->err_info_xmit_constraint.status; + rsp->port_xmit_constraint_ei.pkey = + cpu_to_be16(dd->err_info_xmit_constraint.pkey); + rsp->port_xmit_constraint_ei.slid = + cpu_to_be32(dd->err_info_xmit_constraint.slid); + + rsp->port_rcv_constraint_ei.status = + dd->err_info_rcv_constraint.status; + rsp->port_rcv_constraint_ei.pkey = + cpu_to_be16(dd->err_info_rcv_constraint.pkey); + rsp->port_rcv_constraint_ei.slid = + cpu_to_be32(dd->err_info_rcv_constraint.slid); + + /* UncorrectableErrorInfo */ + rsp->uncorrectable_ei.status_and_code = dd->err_info_uncorrectable; + + /* FMConfigErrorInfo */ + rsp->fm_config_ei.status_and_code = dd->err_info_fmconfig; + + if (resp_len) + *resp_len += response_data_size; + + return reply((struct ib_mad_hdr *)pmp); +} + +static int pma_set_opa_portstatus(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + struct opa_clear_port_status *req = + (struct opa_clear_port_status *)pmp->data; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 nports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24; + u64 portn = be64_to_cpu(req->port_select_mask[3]); + u32 counter_select = be32_to_cpu(req->counter_select_mask); + u32 vl_select_mask = VL_MASK_ALL; /* clear all per-vl cnts */ + unsigned long vl; + + if ((nports != 1) || (portn != 1 << port)) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + /* + * only counters returned by pma_get_opa_portstatus() are + * handled, so when pma_get_opa_portstatus() gets a fix, + * the corresponding change should be made here as well. + */ + + if (counter_select & CS_PORT_XMIT_DATA) + write_dev_cntr(dd, C_DC_XMIT_FLITS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_RCV_DATA) + write_dev_cntr(dd, C_DC_RCV_FLITS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_XMIT_PKTS) + write_dev_cntr(dd, C_DC_XMIT_PKTS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_RCV_PKTS) + write_dev_cntr(dd, C_DC_RCV_PKTS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_MCAST_XMIT_PKTS) + write_dev_cntr(dd, C_DC_MC_XMIT_PKTS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_MCAST_RCV_PKTS) + write_dev_cntr(dd, C_DC_MC_RCV_PKTS, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_XMIT_WAIT) + write_port_cntr(ppd, C_TX_WAIT, CNTR_INVALID_VL, 0); + + /* ignore cs_sw_portCongestion for HFIs */ + + if (counter_select & CS_PORT_RCV_FECN) + write_dev_cntr(dd, C_DC_RCV_FCN, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_RCV_BECN) + write_dev_cntr(dd, C_DC_RCV_BCN, CNTR_INVALID_VL, 0); + + /* ignore cs_port_xmit_time_cong for HFIs */ + /* ignore cs_port_xmit_wasted_bw for now */ + /* ignore cs_port_xmit_wait_data for now */ + if (counter_select & CS_PORT_RCV_BUBBLE) + write_dev_cntr(dd, C_DC_RCV_BBL, CNTR_INVALID_VL, 0); + + /* Only applicable for switch */ + /*if (counter_select & CS_PORT_MARK_FECN) + write_csr(dd, DCC_PRF_PORT_MARK_FECN_CNT, 0);*/ + + if (counter_select & CS_PORT_RCV_CONSTRAINT_ERRORS) + write_port_cntr(ppd, C_SW_RCV_CSTR_ERR, CNTR_INVALID_VL, 0); + + /* ignore cs_port_rcv_switch_relay_errors for HFIs */ + if (counter_select & CS_PORT_XMIT_DISCARDS) + write_port_cntr(ppd, C_SW_XMIT_DSCD, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_XMIT_CONSTRAINT_ERRORS) + write_port_cntr(ppd, C_SW_XMIT_CSTR_ERR, CNTR_INVALID_VL, 0); + + if (counter_select & CS_PORT_RCV_REMOTE_PHYSICAL_ERRORS) + write_dev_cntr(dd, C_DC_RMT_PHY_ERR, CNTR_INVALID_VL, 0); + + if (counter_select & CS_LOCAL_LINK_INTEGRITY_ERRORS) { + write_dev_cntr(dd, C_DC_TX_REPLAY, CNTR_INVALID_VL, 0); + write_dev_cntr(dd, C_DC_RX_REPLAY, CNTR_INVALID_VL, 0); + } + + if (counter_select & CS_LINK_ERROR_RECOVERY) { + write_dev_cntr(dd, C_DC_SEQ_CRC_CNT, CNTR_INVALID_VL, 0); + write_dev_cntr(dd, C_DC_REINIT_FROM_PEER_CNT, + CNTR_INVALID_VL, 0); + } + + if (counter_select & CS_PORT_RCV_ERRORS) + write_dev_cntr(dd, C_DC_RCV_ERR, CNTR_INVALID_VL, 0); + + if (counter_select & CS_EXCESSIVE_BUFFER_OVERRUNS) { + write_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL, 0); + dd->rcv_ovfl_cnt = 0; + } + + if (counter_select & CS_FM_CONFIG_ERRORS) + write_dev_cntr(dd, C_DC_FM_CFG_ERR, CNTR_INVALID_VL, 0); + + if (counter_select & CS_LINK_DOWNED) + write_port_cntr(ppd, C_SW_LINK_DOWN, CNTR_INVALID_VL, 0); + + if (counter_select & CS_UNCORRECTABLE_ERRORS) + write_dev_cntr(dd, C_DC_UNC_ERR, CNTR_INVALID_VL, 0); + + for_each_set_bit(vl, (unsigned long *)&(vl_select_mask), + 8 * sizeof(vl_select_mask)) { + + if (counter_select & CS_PORT_XMIT_DATA) + write_port_cntr(ppd, C_TX_FLIT_VL, idx_from_vl(vl), 0); + + if (counter_select & CS_PORT_RCV_DATA) + write_dev_cntr(dd, C_DC_RX_FLIT_VL, idx_from_vl(vl), 0); + + if (counter_select & CS_PORT_XMIT_PKTS) + write_port_cntr(ppd, C_TX_PKT_VL, idx_from_vl(vl), 0); + + if (counter_select & CS_PORT_RCV_PKTS) + write_dev_cntr(dd, C_DC_RX_PKT_VL, idx_from_vl(vl), 0); + + if (counter_select & CS_PORT_XMIT_WAIT) + write_port_cntr(ppd, C_TX_WAIT_VL, idx_from_vl(vl), 0); + + /* sw_port_vl_congestion is 0 for HFIs */ + if (counter_select & CS_PORT_RCV_FECN) + write_dev_cntr(dd, C_DC_RCV_FCN_VL, idx_from_vl(vl), 0); + + if (counter_select & CS_PORT_RCV_BECN) + write_dev_cntr(dd, C_DC_RCV_BCN_VL, idx_from_vl(vl), 0); + + /* port_vl_xmit_time_cong is 0 for HFIs */ + /* port_vl_xmit_wasted_bw ??? */ + /* port_vl_xmit_wait_data - TXE (table 13-9 HFI spec) ??? */ + if (counter_select & CS_PORT_RCV_BUBBLE) + write_dev_cntr(dd, C_DC_RCV_BBL_VL, idx_from_vl(vl), 0); + + /*if (counter_select & CS_PORT_MARK_FECN) + write_csr(dd, DCC_PRF_PORT_VL_MARK_FECN_CNT + offset, 0); + */ + /* port_vl_xmit_discards ??? */ + } + + if (resp_len) + *resp_len += sizeof(*req); + + return reply((struct ib_mad_hdr *)pmp); +} + +static int pma_set_opa_errorinfo(struct opa_pma_mad *pmp, + struct ib_device *ibdev, u8 port, u32 *resp_len) +{ + struct _port_ei *rsp; + struct opa_port_error_info_msg *req; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + u64 port_mask; + u32 num_ports; + unsigned long port_num; + u8 num_pslm; + u32 error_info_select; + + req = (struct opa_port_error_info_msg *)pmp->data; + rsp = (struct _port_ei *)&(req->port[0]); + + num_ports = OPA_AM_NPORT(be32_to_cpu(pmp->mad_hdr.attr_mod)); + num_pslm = hweight64(be64_to_cpu(req->port_select_mask[3])); + + memset(rsp, 0, sizeof(*rsp)); + + if (num_ports != 1 || num_ports != num_pslm) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + /* + * The bit set in the mask needs to be consistent with the port + * the request came in on. + */ + port_mask = be64_to_cpu(req->port_select_mask[3]); + port_num = find_first_bit((unsigned long *)&port_mask, + sizeof(port_mask)); + + if ((u8)port_num != port) { + pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)pmp); + } + + error_info_select = be32_to_cpu(req->error_info_select_mask); + + /* PortRcvErrorInfo */ + if (error_info_select & ES_PORT_RCV_ERROR_INFO) + /* turn off status bit */ + dd->err_info_rcvport.status_and_code &= ~OPA_EI_STATUS_SMASK; + + /* ExcessiverBufferOverrunInfo */ + if (error_info_select & ES_EXCESSIVE_BUFFER_OVERRUN_INFO) + /* status bit is essentially kept in the h/w - bit 5 of + * RCV_ERR_INFO */ + write_csr(dd, RCV_ERR_INFO, + RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK); + + if (error_info_select & ES_PORT_XMIT_CONSTRAINT_ERROR_INFO) + dd->err_info_xmit_constraint.status &= ~OPA_EI_STATUS_SMASK; + + if (error_info_select & ES_PORT_RCV_CONSTRAINT_ERROR_INFO) + dd->err_info_rcv_constraint.status &= ~OPA_EI_STATUS_SMASK; + + /* UncorrectableErrorInfo */ + if (error_info_select & ES_UNCORRECTABLE_ERROR_INFO) + /* turn off status bit */ + dd->err_info_uncorrectable &= ~OPA_EI_STATUS_SMASK; + + /* FMConfigErrorInfo */ + if (error_info_select & ES_FM_CONFIG_ERROR_INFO) + /* turn off status bit */ + dd->err_info_fmconfig &= ~OPA_EI_STATUS_SMASK; + + if (resp_len) + *resp_len += sizeof(*req); + + return reply((struct ib_mad_hdr *)pmp); +} + +struct opa_congestion_info_attr { + __be16 congestion_info; + u8 control_table_cap; /* Multiple of 64 entry unit CCTs */ + u8 congestion_log_length; +} __packed; + +static int __subn_get_opa_cong_info(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct opa_congestion_info_attr *p = + (struct opa_congestion_info_attr *)data; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + p->congestion_info = 0; + p->control_table_cap = ppd->cc_max_table_entries; + p->congestion_log_length = OPA_CONG_LOG_ELEMS; + + if (resp_len) + *resp_len += sizeof(*p); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_get_opa_cong_setting(struct opa_smp *smp, u32 am, + u8 *data, + struct ib_device *ibdev, + u8 port, u32 *resp_len) +{ + int i; + struct opa_congestion_setting_attr *p = + (struct opa_congestion_setting_attr *) data; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct opa_congestion_setting_entry_shadow *entries; + struct cc_state *cc_state; + + rcu_read_lock(); + + cc_state = get_cc_state(ppd); + + if (cc_state == NULL) { + rcu_read_unlock(); + return reply((struct ib_mad_hdr *)smp); + } + + entries = cc_state->cong_setting.entries; + p->port_control = cpu_to_be16(cc_state->cong_setting.port_control); + p->control_map = cpu_to_be32(cc_state->cong_setting.control_map); + for (i = 0; i < OPA_MAX_SLS; i++) { + p->entries[i].ccti_increase = entries[i].ccti_increase; + p->entries[i].ccti_timer = cpu_to_be16(entries[i].ccti_timer); + p->entries[i].trigger_threshold = + entries[i].trigger_threshold; + p->entries[i].ccti_min = entries[i].ccti_min; + } + + rcu_read_unlock(); + + if (resp_len) + *resp_len += sizeof(*p); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_cong_setting(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct opa_congestion_setting_attr *p = + (struct opa_congestion_setting_attr *) data; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct opa_congestion_setting_entry_shadow *entries; + int i; + + ppd->cc_sl_control_map = be32_to_cpu(p->control_map); + + entries = ppd->congestion_entries; + for (i = 0; i < OPA_MAX_SLS; i++) { + entries[i].ccti_increase = p->entries[i].ccti_increase; + entries[i].ccti_timer = be16_to_cpu(p->entries[i].ccti_timer); + entries[i].trigger_threshold = + p->entries[i].trigger_threshold; + entries[i].ccti_min = p->entries[i].ccti_min; + } + + return __subn_get_opa_cong_setting(smp, am, data, ibdev, port, + resp_len); +} + +static int __subn_get_opa_hfi1_cong_log(struct opa_smp *smp, u32 am, + u8 *data, struct ib_device *ibdev, + u8 port, u32 *resp_len) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct opa_hfi1_cong_log *cong_log = (struct opa_hfi1_cong_log *)data; + s64 ts; + int i; + + if (am != 0) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + spin_lock(&ppd->cc_log_lock); + + cong_log->log_type = OPA_CC_LOG_TYPE_HFI; + cong_log->congestion_flags = 0; + cong_log->threshold_event_counter = + cpu_to_be16(ppd->threshold_event_counter); + memcpy(cong_log->threshold_cong_event_map, + ppd->threshold_cong_event_map, + sizeof(cong_log->threshold_cong_event_map)); + /* keep timestamp in units of 1.024 usec */ + ts = ktime_to_ns(ktime_get()) / 1024; + cong_log->current_time_stamp = cpu_to_be32(ts); + for (i = 0; i < OPA_CONG_LOG_ELEMS; i++) { + struct opa_hfi1_cong_log_event_internal *cce = + &ppd->cc_events[ppd->cc_mad_idx++]; + if (ppd->cc_mad_idx == OPA_CONG_LOG_ELEMS) + ppd->cc_mad_idx = 0; + /* + * Entries which are older than twice the time + * required to wrap the counter are supposed to + * be zeroed (CA10-49 IBTA, release 1.2.1, V1). + */ + if ((u64)(ts - cce->timestamp) > (2 * UINT_MAX)) + continue; + memcpy(cong_log->events[i].local_qp_cn_entry, &cce->lqpn, 3); + memcpy(cong_log->events[i].remote_qp_number_cn_entry, + &cce->rqpn, 3); + cong_log->events[i].sl_svc_type_cn_entry = + ((cce->sl & 0x1f) << 3) | (cce->svc_type & 0x7); + cong_log->events[i].remote_lid_cn_entry = + cpu_to_be32(cce->rlid); + cong_log->events[i].timestamp_cn_entry = + cpu_to_be32(cce->timestamp); + } + + /* + * Reset threshold_cong_event_map, and threshold_event_counter + * to 0 when log is read. + */ + memset(ppd->threshold_cong_event_map, 0x0, + sizeof(ppd->threshold_cong_event_map)); + ppd->threshold_event_counter = 0; + + spin_unlock(&ppd->cc_log_lock); + + if (resp_len) + *resp_len += sizeof(struct opa_hfi1_cong_log); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_get_opa_cc_table(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct ib_cc_table_attr *cc_table_attr = + (struct ib_cc_table_attr *) data; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 start_block = OPA_AM_START_BLK(am); + u32 n_blocks = OPA_AM_NBLK(am); + struct ib_cc_table_entry_shadow *entries; + int i, j; + u32 sentry, eentry; + struct cc_state *cc_state; + + /* sanity check n_blocks, start_block */ + if (n_blocks == 0 || + start_block + n_blocks > ppd->cc_max_table_entries) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + rcu_read_lock(); + + cc_state = get_cc_state(ppd); + + if (cc_state == NULL) { + rcu_read_unlock(); + return reply((struct ib_mad_hdr *)smp); + } + + sentry = start_block * IB_CCT_ENTRIES; + eentry = sentry + (IB_CCT_ENTRIES * n_blocks); + + cc_table_attr->ccti_limit = cpu_to_be16(cc_state->cct.ccti_limit); + + entries = cc_state->cct.entries; + + /* return n_blocks, though the last block may not be full */ + for (j = 0, i = sentry; i < eentry; j++, i++) + cc_table_attr->ccti_entries[j].entry = + cpu_to_be16(entries[i].entry); + + rcu_read_unlock(); + + if (resp_len) + *resp_len += sizeof(u16)*(IB_CCT_ENTRIES * n_blocks + 1); + + return reply((struct ib_mad_hdr *)smp); +} + +void cc_state_reclaim(struct rcu_head *rcu) +{ + struct cc_state *cc_state = container_of(rcu, struct cc_state, rcu); + + kfree(cc_state); +} + +static int __subn_set_opa_cc_table(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct ib_cc_table_attr *p = (struct ib_cc_table_attr *) data; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 start_block = OPA_AM_START_BLK(am); + u32 n_blocks = OPA_AM_NBLK(am); + struct ib_cc_table_entry_shadow *entries; + int i, j; + u32 sentry, eentry; + u16 ccti_limit; + struct cc_state *old_cc_state, *new_cc_state; + + /* sanity check n_blocks, start_block */ + if (n_blocks == 0 || + start_block + n_blocks > ppd->cc_max_table_entries) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + sentry = start_block * IB_CCT_ENTRIES; + eentry = sentry + ((n_blocks - 1) * IB_CCT_ENTRIES) + + (be16_to_cpu(p->ccti_limit)) % IB_CCT_ENTRIES + 1; + + /* sanity check ccti_limit */ + ccti_limit = be16_to_cpu(p->ccti_limit); + if (ccti_limit + 1 > eentry) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + new_cc_state = kzalloc(sizeof(*new_cc_state), GFP_KERNEL); + if (new_cc_state == NULL) + goto getit; + + spin_lock(&ppd->cc_state_lock); + + old_cc_state = get_cc_state(ppd); + + if (old_cc_state == NULL) { + spin_unlock(&ppd->cc_state_lock); + kfree(new_cc_state); + return reply((struct ib_mad_hdr *)smp); + } + + *new_cc_state = *old_cc_state; + + new_cc_state->cct.ccti_limit = ccti_limit; + + entries = ppd->ccti_entries; + ppd->total_cct_entry = ccti_limit + 1; + + for (j = 0, i = sentry; i < eentry; j++, i++) + entries[i].entry = be16_to_cpu(p->ccti_entries[j].entry); + + memcpy(new_cc_state->cct.entries, entries, + eentry * sizeof(struct ib_cc_table_entry)); + + new_cc_state->cong_setting.port_control = IB_CC_CCS_PC_SL_BASED; + new_cc_state->cong_setting.control_map = ppd->cc_sl_control_map; + memcpy(new_cc_state->cong_setting.entries, ppd->congestion_entries, + OPA_MAX_SLS * sizeof(struct opa_congestion_setting_entry)); + + rcu_assign_pointer(ppd->cc_state, new_cc_state); + + spin_unlock(&ppd->cc_state_lock); + + call_rcu(&old_cc_state->rcu, cc_state_reclaim); + +getit: + return __subn_get_opa_cc_table(smp, am, data, ibdev, port, resp_len); +} + +struct opa_led_info { + __be32 rsvd_led_mask; + __be32 rsvd; +}; + +#define OPA_LED_SHIFT 31 +#define OPA_LED_MASK (1 << OPA_LED_SHIFT) + +static int __subn_get_opa_led_info(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct opa_led_info *p = (struct opa_led_info *) data; + u32 nport = OPA_AM_NPORT(am); + u64 reg; + + if (nport != 1 || OPA_AM_PORTNUM(am)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + reg = read_csr(dd, DCC_CFG_LED_CNTRL); + if ((reg & DCC_CFG_LED_CNTRL_LED_CNTRL_SMASK) && + ((reg & DCC_CFG_LED_CNTRL_LED_SW_BLINK_RATE_SMASK) == 0xf)) + p->rsvd_led_mask = cpu_to_be32(OPA_LED_MASK); + + if (resp_len) + *resp_len += sizeof(struct opa_led_info); + + return reply((struct ib_mad_hdr *)smp); +} + +static int __subn_set_opa_led_info(struct opa_smp *smp, u32 am, u8 *data, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct opa_led_info *p = (struct opa_led_info *) data; + u32 nport = OPA_AM_NPORT(am); + int on = !!(be32_to_cpu(p->rsvd_led_mask) & OPA_LED_MASK); + + if (nport != 1 || OPA_AM_PORTNUM(am)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + setextled(dd, on); + + return __subn_get_opa_led_info(smp, am, data, ibdev, port, resp_len); +} + +static int subn_get_opa_sma(__be16 attr_id, struct opa_smp *smp, u32 am, + u8 *data, struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + int ret; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + + switch (attr_id) { + case IB_SMP_ATTR_NODE_DESC: + ret = __subn_get_opa_nodedesc(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_NODE_INFO: + ret = __subn_get_opa_nodeinfo(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_PORT_INFO: + ret = __subn_get_opa_portinfo(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_PKEY_TABLE: + ret = __subn_get_opa_pkeytable(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SL_TO_SC_MAP: + ret = __subn_get_opa_sl_to_sc(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_SL_MAP: + ret = __subn_get_opa_sc_to_sl(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_VLT_MAP: + ret = __subn_get_opa_sc_to_vlt(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_VLNT_MAP: + ret = __subn_get_opa_sc_to_vlnt(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_PORT_STATE_INFO: + ret = __subn_get_opa_psi(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_BUFFER_CONTROL_TABLE: + ret = __subn_get_opa_bct(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_CABLE_INFO: + ret = __subn_get_opa_cable_info(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_VL_ARB_TABLE: + ret = __subn_get_opa_vl_arb(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_CONGESTION_INFO: + ret = __subn_get_opa_cong_info(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_HFI_CONGESTION_SETTING: + ret = __subn_get_opa_cong_setting(smp, am, data, ibdev, + port, resp_len); + break; + case OPA_ATTRIB_ID_HFI_CONGESTION_LOG: + ret = __subn_get_opa_hfi1_cong_log(smp, am, data, ibdev, + port, resp_len); + break; + case OPA_ATTRIB_ID_CONGESTION_CONTROL_TABLE: + ret = __subn_get_opa_cc_table(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_LED_INFO: + ret = __subn_get_opa_led_info(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_SM_INFO: + if (ibp->port_cap_flags & IB_PORT_SM_DISABLED) + return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED; + if (ibp->port_cap_flags & IB_PORT_SM) + return IB_MAD_RESULT_SUCCESS; + /* FALLTHROUGH */ + default: + smp->status |= IB_SMP_UNSUP_METH_ATTR; + ret = reply((struct ib_mad_hdr *)smp); + break; + } + return ret; +} + +static int subn_set_opa_sma(__be16 attr_id, struct opa_smp *smp, u32 am, + u8 *data, struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + int ret; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + + switch (attr_id) { + case IB_SMP_ATTR_PORT_INFO: + ret = __subn_set_opa_portinfo(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_PKEY_TABLE: + ret = __subn_set_opa_pkeytable(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SL_TO_SC_MAP: + ret = __subn_set_opa_sl_to_sc(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_SL_MAP: + ret = __subn_set_opa_sc_to_sl(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_VLT_MAP: + ret = __subn_set_opa_sc_to_vlt(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_SC_TO_VLNT_MAP: + ret = __subn_set_opa_sc_to_vlnt(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_PORT_STATE_INFO: + ret = __subn_set_opa_psi(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_BUFFER_CONTROL_TABLE: + ret = __subn_set_opa_bct(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_VL_ARB_TABLE: + ret = __subn_set_opa_vl_arb(smp, am, data, ibdev, port, + resp_len); + break; + case OPA_ATTRIB_ID_HFI_CONGESTION_SETTING: + ret = __subn_set_opa_cong_setting(smp, am, data, ibdev, + port, resp_len); + break; + case OPA_ATTRIB_ID_CONGESTION_CONTROL_TABLE: + ret = __subn_set_opa_cc_table(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_LED_INFO: + ret = __subn_set_opa_led_info(smp, am, data, ibdev, port, + resp_len); + break; + case IB_SMP_ATTR_SM_INFO: + if (ibp->port_cap_flags & IB_PORT_SM_DISABLED) + return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED; + if (ibp->port_cap_flags & IB_PORT_SM) + return IB_MAD_RESULT_SUCCESS; + /* FALLTHROUGH */ + default: + smp->status |= IB_SMP_UNSUP_METH_ATTR; + ret = reply((struct ib_mad_hdr *)smp); + break; + } + return ret; +} + +static inline void set_aggr_error(struct opa_aggregate *ag) +{ + ag->err_reqlength |= cpu_to_be16(0x8000); +} + +static int subn_get_opa_aggregate(struct opa_smp *smp, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + int i; + u32 num_attr = be32_to_cpu(smp->attr_mod) & 0x000000ff; + u8 *next_smp = opa_get_smp_data(smp); + + if (num_attr < 1 || num_attr > 117) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < num_attr; i++) { + struct opa_aggregate *agg; + size_t agg_data_len; + size_t agg_size; + u32 am; + + agg = (struct opa_aggregate *)next_smp; + agg_data_len = (be16_to_cpu(agg->err_reqlength) & 0x007f) * 8; + agg_size = sizeof(*agg) + agg_data_len; + am = be32_to_cpu(agg->attr_mod); + + *resp_len += agg_size; + + if (next_smp + agg_size > ((u8 *)smp) + sizeof(*smp)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + /* zero the payload for this segment */ + memset(next_smp + sizeof(*agg), 0, agg_data_len); + + (void) subn_get_opa_sma(agg->attr_id, smp, am, agg->data, + ibdev, port, NULL); + if (smp->status & ~IB_SMP_DIRECTION) { + set_aggr_error(agg); + return reply((struct ib_mad_hdr *)smp); + } + next_smp += agg_size; + + } + + return reply((struct ib_mad_hdr *)smp); +} + +static int subn_set_opa_aggregate(struct opa_smp *smp, + struct ib_device *ibdev, u8 port, + u32 *resp_len) +{ + int i; + u32 num_attr = be32_to_cpu(smp->attr_mod) & 0x000000ff; + u8 *next_smp = opa_get_smp_data(smp); + + if (num_attr < 1 || num_attr > 117) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + for (i = 0; i < num_attr; i++) { + struct opa_aggregate *agg; + size_t agg_data_len; + size_t agg_size; + u32 am; + + agg = (struct opa_aggregate *)next_smp; + agg_data_len = (be16_to_cpu(agg->err_reqlength) & 0x007f) * 8; + agg_size = sizeof(*agg) + agg_data_len; + am = be32_to_cpu(agg->attr_mod); + + *resp_len += agg_size; + + if (next_smp + agg_size > ((u8 *)smp) + sizeof(*smp)) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + + (void) subn_set_opa_sma(agg->attr_id, smp, am, agg->data, + ibdev, port, NULL); + if (smp->status & ~IB_SMP_DIRECTION) { + set_aggr_error(agg); + return reply((struct ib_mad_hdr *)smp); + } + next_smp += agg_size; + + } + + return reply((struct ib_mad_hdr *)smp); +} + +/* + * OPAv1 specifies that, on the transition to link up, these counters + * are cleared: + * PortRcvErrors [*] + * LinkErrorRecovery + * LocalLinkIntegrityErrors + * ExcessiveBufferOverruns [*] + * + * [*] Error info associated with these counters is retained, but the + * error info status is reset to 0. + */ +void clear_linkup_counters(struct hfi1_devdata *dd) +{ + /* PortRcvErrors */ + write_dev_cntr(dd, C_DC_RCV_ERR, CNTR_INVALID_VL, 0); + dd->err_info_rcvport.status_and_code &= ~OPA_EI_STATUS_SMASK; + /* LinkErrorRecovery */ + write_dev_cntr(dd, C_DC_SEQ_CRC_CNT, CNTR_INVALID_VL, 0); + write_dev_cntr(dd, C_DC_REINIT_FROM_PEER_CNT, CNTR_INVALID_VL, 0); + /* LocalLinkIntegrityErrors */ + write_dev_cntr(dd, C_DC_TX_REPLAY, CNTR_INVALID_VL, 0); + write_dev_cntr(dd, C_DC_RX_REPLAY, CNTR_INVALID_VL, 0); + /* ExcessiveBufferOverruns */ + write_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL, 0); + dd->rcv_ovfl_cnt = 0; + dd->err_info_xmit_constraint.status &= ~OPA_EI_STATUS_SMASK; +} + +/* + * is_local_mad() returns 1 if 'mad' is sent from, and destined to the + * local node, 0 otherwise. + */ +static int is_local_mad(struct hfi1_ibport *ibp, const struct opa_mad *mad, + const struct ib_wc *in_wc) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + const struct opa_smp *smp = (const struct opa_smp *)mad; + + if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { + return (smp->hop_cnt == 0 && + smp->route.dr.dr_slid == OPA_LID_PERMISSIVE && + smp->route.dr.dr_dlid == OPA_LID_PERMISSIVE); + } + + return (in_wc->slid == ppd->lid); +} + +/* + * opa_local_smp_check() should only be called on MADs for which + * is_local_mad() returns true. It applies the SMP checks that are + * specific to SMPs which are sent from, and destined to this node. + * opa_local_smp_check() returns 0 if the SMP passes its checks, 1 + * otherwise. + * + * SMPs which arrive from other nodes are instead checked by + * opa_smp_check(). + */ +static int opa_local_smp_check(struct hfi1_ibport *ibp, + const struct ib_wc *in_wc) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u16 slid = in_wc->slid; + u16 pkey; + + if (in_wc->pkey_index >= ARRAY_SIZE(ppd->pkeys)) + return 1; + + pkey = ppd->pkeys[in_wc->pkey_index]; + /* + * We need to do the "node-local" checks specified in OPAv1, + * rev 0.90, section 9.10.26, which are: + * - pkey is 0x7fff, or 0xffff + * - Source QPN == 0 || Destination QPN == 0 + * - the MAD header's management class is either + * IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE or + * IB_MGMT_CLASS_SUBN_LID_ROUTED + * - SLID != 0 + * + * However, we know (and so don't need to check again) that, + * for local SMPs, the MAD stack passes MADs with: + * - Source QPN of 0 + * - MAD mgmt_class is IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE + * - SLID is either: OPA_LID_PERMISSIVE (0xFFFFFFFF), or + * our own port's lid + * + */ + if (pkey == LIM_MGMT_P_KEY || pkey == FULL_MGMT_P_KEY) + return 0; + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; +} + +static int process_subn_opa(struct ib_device *ibdev, int mad_flags, + u8 port, const struct opa_mad *in_mad, + struct opa_mad *out_mad, + u32 *resp_len) +{ + struct opa_smp *smp = (struct opa_smp *)out_mad; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + u8 *data; + u32 am; + __be16 attr_id; + int ret; + + *out_mad = *in_mad; + data = opa_get_smp_data(smp); + + am = be32_to_cpu(smp->attr_mod); + attr_id = smp->attr_id; + if (smp->class_version != OPA_SMI_CLASS_VERSION) { + smp->status |= IB_SMP_UNSUP_VERSION; + ret = reply((struct ib_mad_hdr *)smp); + goto bail; + } + ret = check_mkey(ibp, (struct ib_mad_hdr *)smp, mad_flags, smp->mkey, + smp->route.dr.dr_slid, smp->route.dr.return_path, + smp->hop_cnt); + if (ret) { + u32 port_num = be32_to_cpu(smp->attr_mod); + + /* + * If this is a get/set portinfo, we already check the + * M_Key if the MAD is for another port and the M_Key + * is OK on the receiving port. This check is needed + * to increment the error counters when the M_Key + * fails to match on *both* ports. + */ + if (attr_id == IB_SMP_ATTR_PORT_INFO && + (smp->method == IB_MGMT_METHOD_GET || + smp->method == IB_MGMT_METHOD_SET) && + port_num && port_num <= ibdev->phys_port_cnt && + port != port_num) + (void) check_mkey(to_iport(ibdev, port_num), + (struct ib_mad_hdr *)smp, 0, + smp->mkey, smp->route.dr.dr_slid, + smp->route.dr.return_path, + smp->hop_cnt); + ret = IB_MAD_RESULT_FAILURE; + goto bail; + } + + *resp_len = opa_get_smp_header_size(smp); + + switch (smp->method) { + case IB_MGMT_METHOD_GET: + switch (attr_id) { + default: + clear_opa_smp_data(smp); + ret = subn_get_opa_sma(attr_id, smp, am, data, + ibdev, port, resp_len); + goto bail; + case OPA_ATTRIB_ID_AGGREGATE: + ret = subn_get_opa_aggregate(smp, ibdev, port, + resp_len); + goto bail; + } + case IB_MGMT_METHOD_SET: + switch (attr_id) { + default: + ret = subn_set_opa_sma(attr_id, smp, am, data, + ibdev, port, resp_len); + goto bail; + case OPA_ATTRIB_ID_AGGREGATE: + ret = subn_set_opa_aggregate(smp, ibdev, port, + resp_len); + goto bail; + } + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_REPORT: + case IB_MGMT_METHOD_REPORT_RESP: + case IB_MGMT_METHOD_GET_RESP: + /* + * The ib_mad module will call us to process responses + * before checking for other consumers. + * Just tell the caller to process it normally. + */ + ret = IB_MAD_RESULT_SUCCESS; + goto bail; + default: + smp->status |= IB_SMP_UNSUP_METHOD; + ret = reply((struct ib_mad_hdr *)smp); + } + +bail: + return ret; +} + +static int process_subn(struct ib_device *ibdev, int mad_flags, + u8 port, const struct ib_mad *in_mad, + struct ib_mad *out_mad) +{ + struct ib_smp *smp = (struct ib_smp *)out_mad; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + int ret; + + *out_mad = *in_mad; + if (smp->class_version != 1) { + smp->status |= IB_SMP_UNSUP_VERSION; + ret = reply((struct ib_mad_hdr *)smp); + goto bail; + } + + ret = check_mkey(ibp, (struct ib_mad_hdr *)smp, mad_flags, + smp->mkey, (__force __be32)smp->dr_slid, + smp->return_path, smp->hop_cnt); + if (ret) { + u32 port_num = be32_to_cpu(smp->attr_mod); + + /* + * If this is a get/set portinfo, we already check the + * M_Key if the MAD is for another port and the M_Key + * is OK on the receiving port. This check is needed + * to increment the error counters when the M_Key + * fails to match on *both* ports. + */ + if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_PORT_INFO && + (smp->method == IB_MGMT_METHOD_GET || + smp->method == IB_MGMT_METHOD_SET) && + port_num && port_num <= ibdev->phys_port_cnt && + port != port_num) + (void) check_mkey(to_iport(ibdev, port_num), + (struct ib_mad_hdr *)smp, 0, + smp->mkey, + (__force __be32)smp->dr_slid, + smp->return_path, smp->hop_cnt); + ret = IB_MAD_RESULT_FAILURE; + goto bail; + } + + switch (smp->method) { + case IB_MGMT_METHOD_GET: + switch (smp->attr_id) { + case IB_SMP_ATTR_NODE_INFO: + ret = subn_get_nodeinfo(smp, ibdev, port); + goto bail; + default: + smp->status |= IB_SMP_UNSUP_METH_ATTR; + ret = reply((struct ib_mad_hdr *)smp); + goto bail; + } + } + +bail: + return ret; +} + +static int process_perf_opa(struct ib_device *ibdev, u8 port, + const struct opa_mad *in_mad, + struct opa_mad *out_mad, u32 *resp_len) +{ + struct opa_pma_mad *pmp = (struct opa_pma_mad *)out_mad; + int ret; + + *out_mad = *in_mad; + + if (pmp->mad_hdr.class_version != OPA_SMI_CLASS_VERSION) { + pmp->mad_hdr.status |= IB_SMP_UNSUP_VERSION; + return reply((struct ib_mad_hdr *)pmp); + } + + *resp_len = sizeof(pmp->mad_hdr); + + switch (pmp->mad_hdr.method) { + case IB_MGMT_METHOD_GET: + switch (pmp->mad_hdr.attr_id) { + case IB_PMA_CLASS_PORT_INFO: + ret = pma_get_opa_classportinfo(pmp, ibdev, resp_len); + goto bail; + case OPA_PM_ATTRIB_ID_PORT_STATUS: + ret = pma_get_opa_portstatus(pmp, ibdev, port, + resp_len); + goto bail; + case OPA_PM_ATTRIB_ID_DATA_PORT_COUNTERS: + ret = pma_get_opa_datacounters(pmp, ibdev, port, + resp_len); + goto bail; + case OPA_PM_ATTRIB_ID_ERROR_PORT_COUNTERS: + ret = pma_get_opa_porterrors(pmp, ibdev, port, + resp_len); + goto bail; + case OPA_PM_ATTRIB_ID_ERROR_INFO: + ret = pma_get_opa_errorinfo(pmp, ibdev, port, + resp_len); + goto bail; + default: + pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR; + ret = reply((struct ib_mad_hdr *)pmp); + goto bail; + } + + case IB_MGMT_METHOD_SET: + switch (pmp->mad_hdr.attr_id) { + case OPA_PM_ATTRIB_ID_CLEAR_PORT_STATUS: + ret = pma_set_opa_portstatus(pmp, ibdev, port, + resp_len); + goto bail; + case OPA_PM_ATTRIB_ID_ERROR_INFO: + ret = pma_set_opa_errorinfo(pmp, ibdev, port, + resp_len); + goto bail; + default: + pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR; + ret = reply((struct ib_mad_hdr *)pmp); + goto bail; + } + + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_GET_RESP: + /* + * The ib_mad module will call us to process responses + * before checking for other consumers. + * Just tell the caller to process it normally. + */ + ret = IB_MAD_RESULT_SUCCESS; + goto bail; + + default: + pmp->mad_hdr.status |= IB_SMP_UNSUP_METHOD; + ret = reply((struct ib_mad_hdr *)pmp); + } + +bail: + return ret; +} + +static int hfi1_process_opa_mad(struct ib_device *ibdev, int mad_flags, + u8 port, const struct ib_wc *in_wc, + const struct ib_grh *in_grh, + const struct opa_mad *in_mad, + struct opa_mad *out_mad, size_t *out_mad_size, + u16 *out_mad_pkey_index) +{ + int ret; + int pkey_idx; + u32 resp_len = 0; + struct hfi1_ibport *ibp = to_iport(ibdev, port); + + pkey_idx = hfi1_lookup_pkey_idx(ibp, LIM_MGMT_P_KEY); + if (pkey_idx < 0) { + pr_warn("failed to find limited mgmt pkey, defaulting 0x%x\n", + hfi1_get_pkey(ibp, 1)); + pkey_idx = 1; + } + *out_mad_pkey_index = (u16)pkey_idx; + + switch (in_mad->mad_hdr.mgmt_class) { + case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE: + case IB_MGMT_CLASS_SUBN_LID_ROUTED: + if (is_local_mad(ibp, in_mad, in_wc)) { + ret = opa_local_smp_check(ibp, in_wc); + if (ret) + return IB_MAD_RESULT_FAILURE; + } + ret = process_subn_opa(ibdev, mad_flags, port, in_mad, + out_mad, &resp_len); + goto bail; + case IB_MGMT_CLASS_PERF_MGMT: + ret = process_perf_opa(ibdev, port, in_mad, out_mad, + &resp_len); + goto bail; + + default: + ret = IB_MAD_RESULT_SUCCESS; + } + +bail: + if (ret & IB_MAD_RESULT_REPLY) + *out_mad_size = round_up(resp_len, 8); + else if (ret & IB_MAD_RESULT_SUCCESS) + *out_mad_size = in_wc->byte_len - sizeof(struct ib_grh); + + return ret; +} + +static int hfi1_process_ib_mad(struct ib_device *ibdev, int mad_flags, u8 port, + const struct ib_wc *in_wc, + const struct ib_grh *in_grh, + const struct ib_mad *in_mad, + struct ib_mad *out_mad) +{ + int ret; + + switch (in_mad->mad_hdr.mgmt_class) { + case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE: + case IB_MGMT_CLASS_SUBN_LID_ROUTED: + ret = process_subn(ibdev, mad_flags, port, in_mad, out_mad); + goto bail; + default: + ret = IB_MAD_RESULT_SUCCESS; + } + +bail: + return ret; +} + +/** + * hfi1_process_mad - process an incoming MAD packet + * @ibdev: the infiniband device this packet came in on + * @mad_flags: MAD flags + * @port: the port number this packet came in on + * @in_wc: the work completion entry for this packet + * @in_grh: the global route header for this packet + * @in_mad: the incoming MAD + * @out_mad: any outgoing MAD reply + * + * Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not + * interested in processing. + * + * Note that the verbs framework has already done the MAD sanity checks, + * and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE + * MADs. + * + * This is called by the ib_mad module. + */ +int hfi1_process_mad(struct ib_device *ibdev, int mad_flags, u8 port, + const struct ib_wc *in_wc, const struct ib_grh *in_grh, + const struct ib_mad_hdr *in_mad, size_t in_mad_size, + struct ib_mad_hdr *out_mad, size_t *out_mad_size, + u16 *out_mad_pkey_index) +{ + switch (in_mad->base_version) { + case OPA_MGMT_BASE_VERSION: + if (unlikely(in_mad_size != sizeof(struct opa_mad))) { + dev_err(ibdev->dma_device, "invalid in_mad_size\n"); + return IB_MAD_RESULT_FAILURE; + } + return hfi1_process_opa_mad(ibdev, mad_flags, port, + in_wc, in_grh, + (struct opa_mad *)in_mad, + (struct opa_mad *)out_mad, + out_mad_size, + out_mad_pkey_index); + case IB_MGMT_BASE_VERSION: + return hfi1_process_ib_mad(ibdev, mad_flags, port, + in_wc, in_grh, + (const struct ib_mad *)in_mad, + (struct ib_mad *)out_mad); + default: + break; + } + + return IB_MAD_RESULT_FAILURE; +} + +static void send_handler(struct ib_mad_agent *agent, + struct ib_mad_send_wc *mad_send_wc) +{ + ib_free_send_mad(mad_send_wc->send_buf); +} + +int hfi1_create_agents(struct hfi1_ibdev *dev) +{ + struct hfi1_devdata *dd = dd_from_dev(dev); + struct ib_mad_agent *agent; + struct hfi1_ibport *ibp; + int p; + int ret; + + for (p = 0; p < dd->num_pports; p++) { + ibp = &dd->pport[p].ibport_data; + agent = ib_register_mad_agent(&dev->ibdev, p + 1, IB_QPT_SMI, + NULL, 0, send_handler, + NULL, NULL, 0); + if (IS_ERR(agent)) { + ret = PTR_ERR(agent); + goto err; + } + + ibp->send_agent = agent; + } + + return 0; + +err: + for (p = 0; p < dd->num_pports; p++) { + ibp = &dd->pport[p].ibport_data; + if (ibp->send_agent) { + agent = ibp->send_agent; + ibp->send_agent = NULL; + ib_unregister_mad_agent(agent); + } + } + + return ret; +} + +void hfi1_free_agents(struct hfi1_ibdev *dev) +{ + struct hfi1_devdata *dd = dd_from_dev(dev); + struct ib_mad_agent *agent; + struct hfi1_ibport *ibp; + int p; + + for (p = 0; p < dd->num_pports; p++) { + ibp = &dd->pport[p].ibport_data; + if (ibp->send_agent) { + agent = ibp->send_agent; + ibp->send_agent = NULL; + ib_unregister_mad_agent(agent); + } + if (ibp->sm_ah) { + ib_destroy_ah(&ibp->sm_ah->ibah); + ibp->sm_ah = NULL; + } + } +} diff --git a/drivers/staging/rdma/hfi1/mad.h b/drivers/staging/rdma/hfi1/mad.h new file mode 100644 index 000000000000..47457501c044 --- /dev/null +++ b/drivers/staging/rdma/hfi1/mad.h @@ -0,0 +1,325 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef _HFI1_MAD_H +#define _HFI1_MAD_H + +#include <rdma/ib_pma.h> +#define USE_PI_LED_ENABLE 1 /* use led enabled bit in struct + * opa_port_states, if available */ +#include <rdma/opa_smi.h> +#include <rdma/opa_port_info.h> +#ifndef PI_LED_ENABLE_SUP +#define PI_LED_ENABLE_SUP 0 +#endif +#include "opa_compat.h" + + + +#define IB_VLARB_LOWPRI_0_31 1 +#define IB_VLARB_LOWPRI_32_63 2 +#define IB_VLARB_HIGHPRI_0_31 3 +#define IB_VLARB_HIGHPRI_32_63 4 + +#define OPA_MAX_PREEMPT_CAP 32 +#define OPA_VLARB_LOW_ELEMENTS 0 +#define OPA_VLARB_HIGH_ELEMENTS 1 +#define OPA_VLARB_PREEMPT_ELEMENTS 2 +#define OPA_VLARB_PREEMPT_MATRIX 3 + +#define IB_PMA_PORT_COUNTERS_CONG cpu_to_be16(0xFF00) + +struct ib_pma_portcounters_cong { + u8 reserved; + u8 reserved1; + __be16 port_check_rate; + __be16 symbol_error_counter; + u8 link_error_recovery_counter; + u8 link_downed_counter; + __be16 port_rcv_errors; + __be16 port_rcv_remphys_errors; + __be16 port_rcv_switch_relay_errors; + __be16 port_xmit_discards; + u8 port_xmit_constraint_errors; + u8 port_rcv_constraint_errors; + u8 reserved2; + u8 link_overrun_errors; /* LocalLink: 7:4, BufferOverrun: 3:0 */ + __be16 reserved3; + __be16 vl15_dropped; + __be64 port_xmit_data; + __be64 port_rcv_data; + __be64 port_xmit_packets; + __be64 port_rcv_packets; + __be64 port_xmit_wait; + __be64 port_adr_events; +} __packed; + +#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004) +#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008) +#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C) +#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C) + +#define OPA_MAX_PREEMPT_CAP 32 +#define OPA_VLARB_LOW_ELEMENTS 0 +#define OPA_VLARB_HIGH_ELEMENTS 1 +#define OPA_VLARB_PREEMPT_ELEMENTS 2 +#define OPA_VLARB_PREEMPT_MATRIX 3 + +#define HFI1_XMIT_RATE_UNSUPPORTED 0x0 +#define HFI1_XMIT_RATE_PICO 0x7 +/* number of 4nsec cycles equaling 2secs */ +#define HFI1_CONG_TIMER_PSINTERVAL 0x1DCD64EC + +#define IB_CC_SVCTYPE_RC 0x0 +#define IB_CC_SVCTYPE_UC 0x1 +#define IB_CC_SVCTYPE_RD 0x2 +#define IB_CC_SVCTYPE_UD 0x3 + + +/* + * There should be an equivalent IB #define for the following, but + * I cannot find it. + */ +#define OPA_CC_LOG_TYPE_HFI 2 + +struct opa_hfi1_cong_log_event_internal { + u32 lqpn; + u32 rqpn; + u8 sl; + u8 svc_type; + u32 rlid; + s64 timestamp; /* wider than 32 bits to detect 32 bit rollover */ +}; + +struct opa_hfi1_cong_log_event { + u8 local_qp_cn_entry[3]; + u8 remote_qp_number_cn_entry[3]; + u8 sl_svc_type_cn_entry; /* 5 bits SL, 3 bits svc type */ + u8 reserved; + __be32 remote_lid_cn_entry; + __be32 timestamp_cn_entry; +} __packed; + +#define OPA_CONG_LOG_ELEMS 96 + +struct opa_hfi1_cong_log { + u8 log_type; + u8 congestion_flags; + __be16 threshold_event_counter; + __be32 current_time_stamp; + u8 threshold_cong_event_map[OPA_MAX_SLS/8]; + struct opa_hfi1_cong_log_event events[OPA_CONG_LOG_ELEMS]; +} __packed; + +#define IB_CC_TABLE_CAP_DEFAULT 31 + +/* Port control flags */ +#define IB_CC_CCS_PC_SL_BASED 0x01 + +struct opa_congestion_setting_entry { + u8 ccti_increase; + u8 reserved; + __be16 ccti_timer; + u8 trigger_threshold; + u8 ccti_min; /* min CCTI for cc table */ +} __packed; + +struct opa_congestion_setting_entry_shadow { + u8 ccti_increase; + u8 reserved; + u16 ccti_timer; + u8 trigger_threshold; + u8 ccti_min; /* min CCTI for cc table */ +} __packed; + +struct opa_congestion_setting_attr { + __be32 control_map; + __be16 port_control; + struct opa_congestion_setting_entry entries[OPA_MAX_SLS]; +} __packed; + +struct opa_congestion_setting_attr_shadow { + u32 control_map; + u16 port_control; + struct opa_congestion_setting_entry_shadow entries[OPA_MAX_SLS]; +} __packed; + +#define IB_CC_TABLE_ENTRY_INCREASE_DEFAULT 1 +#define IB_CC_TABLE_ENTRY_TIMER_DEFAULT 1 + +/* 64 Congestion Control table entries in a single MAD */ +#define IB_CCT_ENTRIES 64 +#define IB_CCT_MIN_ENTRIES (IB_CCT_ENTRIES * 2) + +struct ib_cc_table_entry { + __be16 entry; /* shift:2, multiplier:14 */ +}; + +struct ib_cc_table_entry_shadow { + u16 entry; /* shift:2, multiplier:14 */ +}; + +struct ib_cc_table_attr { + __be16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry ccti_entries[IB_CCT_ENTRIES]; +} __packed; + +struct ib_cc_table_attr_shadow { + u16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry_shadow ccti_entries[IB_CCT_ENTRIES]; +} __packed; + +#define CC_TABLE_SHADOW_MAX \ + (IB_CC_TABLE_CAP_DEFAULT * IB_CCT_ENTRIES) + +struct cc_table_shadow { + u16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry_shadow entries[CC_TABLE_SHADOW_MAX]; +} __packed; + +/* + * struct cc_state combines the (active) per-port congestion control + * table, and the (active) per-SL congestion settings. cc_state data + * may need to be read in code paths that we want to be fast, so it + * is an RCU protected structure. + */ +struct cc_state { + struct rcu_head rcu; + struct cc_table_shadow cct; + struct opa_congestion_setting_attr_shadow cong_setting; +}; + +/* + * OPA BufferControl MAD + */ + +/* attribute modifier macros */ +#define OPA_AM_NPORT_SHIFT 24 +#define OPA_AM_NPORT_MASK 0xff +#define OPA_AM_NPORT_SMASK (OPA_AM_NPORT_MASK << OPA_AM_NPORT_SHIFT) +#define OPA_AM_NPORT(am) (((am) >> OPA_AM_NPORT_SHIFT) & \ + OPA_AM_NPORT_MASK) + +#define OPA_AM_NBLK_SHIFT 24 +#define OPA_AM_NBLK_MASK 0xff +#define OPA_AM_NBLK_SMASK (OPA_AM_NBLK_MASK << OPA_AM_NBLK_SHIFT) +#define OPA_AM_NBLK(am) (((am) >> OPA_AM_NBLK_SHIFT) & \ + OPA_AM_NBLK_MASK) + +#define OPA_AM_START_BLK_SHIFT 0 +#define OPA_AM_START_BLK_MASK 0xff +#define OPA_AM_START_BLK_SMASK (OPA_AM_START_BLK_MASK << \ + OPA_AM_START_BLK_SHIFT) +#define OPA_AM_START_BLK(am) (((am) >> OPA_AM_START_BLK_SHIFT) & \ + OPA_AM_START_BLK_MASK) + +#define OPA_AM_PORTNUM_SHIFT 0 +#define OPA_AM_PORTNUM_MASK 0xff +#define OPA_AM_PORTNUM_SMASK (OPA_AM_PORTNUM_MASK << OPA_AM_PORTNUM_SHIFT) +#define OPA_AM_PORTNUM(am) (((am) >> OPA_AM_PORTNUM_SHIFT) & \ + OPA_AM_PORTNUM_MASK) + +#define OPA_AM_ASYNC_SHIFT 12 +#define OPA_AM_ASYNC_MASK 0x1 +#define OPA_AM_ASYNC_SMASK (OPA_AM_ASYNC_MASK << OPA_AM_ASYNC_SHIFT) +#define OPA_AM_ASYNC(am) (((am) >> OPA_AM_ASYNC_SHIFT) & \ + OPA_AM_ASYNC_MASK) + +#define OPA_AM_START_SM_CFG_SHIFT 9 +#define OPA_AM_START_SM_CFG_MASK 0x1 +#define OPA_AM_START_SM_CFG_SMASK (OPA_AM_START_SM_CFG_MASK << \ + OPA_AM_START_SM_CFG_SHIFT) +#define OPA_AM_START_SM_CFG(am) (((am) >> OPA_AM_START_SM_CFG_SHIFT) \ + & OPA_AM_START_SM_CFG_MASK) + +#define OPA_AM_CI_ADDR_SHIFT 19 +#define OPA_AM_CI_ADDR_MASK 0xfff +#define OPA_AM_CI_ADDR_SMASK (OPA_AM_CI_ADDR_MASK << OPA_CI_ADDR_SHIFT) +#define OPA_AM_CI_ADDR(am) (((am) >> OPA_AM_CI_ADDR_SHIFT) & \ + OPA_AM_CI_ADDR_MASK) + +#define OPA_AM_CI_LEN_SHIFT 13 +#define OPA_AM_CI_LEN_MASK 0x3f +#define OPA_AM_CI_LEN_SMASK (OPA_AM_CI_LEN_MASK << OPA_CI_LEN_SHIFT) +#define OPA_AM_CI_LEN(am) (((am) >> OPA_AM_CI_LEN_SHIFT) & \ + OPA_AM_CI_LEN_MASK) + +/* error info macros */ +#define OPA_EI_STATUS_SMASK 0x80 +#define OPA_EI_CODE_SMASK 0x0f + +struct vl_limit { + __be16 dedicated; + __be16 shared; +}; + +struct buffer_control { + __be16 reserved; + __be16 overall_shared_limit; + struct vl_limit vl[OPA_MAX_VLS]; +}; + +struct sc2vlnt { + u8 vlnt[32]; /* 5 bit VL, 3 bits reserved */ +}; + +/* + * The PortSamplesControl.CounterMasks field is an array of 3 bit fields + * which specify the N'th counter's capabilities. See ch. 16.1.3.2. + * We support 5 counters which only count the mandatory quantities. + */ +#define COUNTER_MASK(q, n) (q << ((9 - n) * 3)) +#define COUNTER_MASK0_9 \ + cpu_to_be32(COUNTER_MASK(1, 0) | \ + COUNTER_MASK(1, 1) | \ + COUNTER_MASK(1, 2) | \ + COUNTER_MASK(1, 3) | \ + COUNTER_MASK(1, 4)) + +#endif /* _HFI1_MAD_H */ diff --git a/drivers/staging/rdma/hfi1/mmap.c b/drivers/staging/rdma/hfi1/mmap.c new file mode 100644 index 000000000000..5173b1c60b3d --- /dev/null +++ b/drivers/staging/rdma/hfi1/mmap.c @@ -0,0 +1,192 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <asm/pgtable.h> + +#include "verbs.h" + +/** + * hfi1_release_mmap_info - free mmap info structure + * @ref: a pointer to the kref within struct hfi1_mmap_info + */ +void hfi1_release_mmap_info(struct kref *ref) +{ + struct hfi1_mmap_info *ip = + container_of(ref, struct hfi1_mmap_info, ref); + struct hfi1_ibdev *dev = to_idev(ip->context->device); + + spin_lock_irq(&dev->pending_lock); + list_del(&ip->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + + vfree(ip->obj); + kfree(ip); +} + +/* + * open and close keep track of how many times the CQ is mapped, + * to avoid releasing it. + */ +static void hfi1_vma_open(struct vm_area_struct *vma) +{ + struct hfi1_mmap_info *ip = vma->vm_private_data; + + kref_get(&ip->ref); +} + +static void hfi1_vma_close(struct vm_area_struct *vma) +{ + struct hfi1_mmap_info *ip = vma->vm_private_data; + + kref_put(&ip->ref, hfi1_release_mmap_info); +} + +static struct vm_operations_struct hfi1_vm_ops = { + .open = hfi1_vma_open, + .close = hfi1_vma_close, +}; + +/** + * hfi1_mmap - create a new mmap region + * @context: the IB user context of the process making the mmap() call + * @vma: the VMA to be initialized + * Return zero if the mmap is OK. Otherwise, return an errno. + */ +int hfi1_mmap(struct ib_ucontext *context, struct vm_area_struct *vma) +{ + struct hfi1_ibdev *dev = to_idev(context->device); + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long size = vma->vm_end - vma->vm_start; + struct hfi1_mmap_info *ip, *pp; + int ret = -EINVAL; + + /* + * Search the device's list of objects waiting for a mmap call. + * Normally, this list is very short since a call to create a + * CQ, QP, or SRQ is soon followed by a call to mmap(). + */ + spin_lock_irq(&dev->pending_lock); + list_for_each_entry_safe(ip, pp, &dev->pending_mmaps, + pending_mmaps) { + /* Only the creator is allowed to mmap the object */ + if (context != ip->context || (__u64) offset != ip->offset) + continue; + /* Don't allow a mmap larger than the object. */ + if (size > ip->size) + break; + + list_del_init(&ip->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + + ret = remap_vmalloc_range(vma, ip->obj, 0); + if (ret) + goto done; + vma->vm_ops = &hfi1_vm_ops; + vma->vm_private_data = ip; + hfi1_vma_open(vma); + goto done; + } + spin_unlock_irq(&dev->pending_lock); +done: + return ret; +} + +/* + * Allocate information for hfi1_mmap + */ +struct hfi1_mmap_info *hfi1_create_mmap_info(struct hfi1_ibdev *dev, + u32 size, + struct ib_ucontext *context, + void *obj) { + struct hfi1_mmap_info *ip; + + ip = kmalloc(sizeof(*ip), GFP_KERNEL); + if (!ip) + goto bail; + + size = PAGE_ALIGN(size); + + spin_lock_irq(&dev->mmap_offset_lock); + if (dev->mmap_offset == 0) + dev->mmap_offset = PAGE_SIZE; + ip->offset = dev->mmap_offset; + dev->mmap_offset += size; + spin_unlock_irq(&dev->mmap_offset_lock); + + INIT_LIST_HEAD(&ip->pending_mmaps); + ip->size = size; + ip->context = context; + ip->obj = obj; + kref_init(&ip->ref); + +bail: + return ip; +} + +void hfi1_update_mmap_info(struct hfi1_ibdev *dev, struct hfi1_mmap_info *ip, + u32 size, void *obj) +{ + size = PAGE_ALIGN(size); + + spin_lock_irq(&dev->mmap_offset_lock); + if (dev->mmap_offset == 0) + dev->mmap_offset = PAGE_SIZE; + ip->offset = dev->mmap_offset; + dev->mmap_offset += size; + spin_unlock_irq(&dev->mmap_offset_lock); + + ip->size = size; + ip->obj = obj; +} diff --git a/drivers/staging/rdma/hfi1/mr.c b/drivers/staging/rdma/hfi1/mr.c new file mode 100644 index 000000000000..23567f83c872 --- /dev/null +++ b/drivers/staging/rdma/hfi1/mr.c @@ -0,0 +1,546 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <rdma/ib_umem.h> +#include <rdma/ib_smi.h> + +#include "hfi.h" + +/* Fast memory region */ +struct hfi1_fmr { + struct ib_fmr ibfmr; + struct hfi1_mregion mr; /* must be last */ +}; + +static inline struct hfi1_fmr *to_ifmr(struct ib_fmr *ibfmr) +{ + return container_of(ibfmr, struct hfi1_fmr, ibfmr); +} + +static int init_mregion(struct hfi1_mregion *mr, struct ib_pd *pd, + int count) +{ + int m, i = 0; + int rval = 0; + + m = (count + HFI1_SEGSZ - 1) / HFI1_SEGSZ; + for (; i < m; i++) { + mr->map[i] = kzalloc(sizeof(*mr->map[0]), GFP_KERNEL); + if (!mr->map[i]) + goto bail; + } + mr->mapsz = m; + init_completion(&mr->comp); + /* count returning the ptr to user */ + atomic_set(&mr->refcount, 1); + mr->pd = pd; + mr->max_segs = count; +out: + return rval; +bail: + while (i) + kfree(mr->map[--i]); + rval = -ENOMEM; + goto out; +} + +static void deinit_mregion(struct hfi1_mregion *mr) +{ + int i = mr->mapsz; + + mr->mapsz = 0; + while (i) + kfree(mr->map[--i]); +} + + +/** + * hfi1_get_dma_mr - get a DMA memory region + * @pd: protection domain for this memory region + * @acc: access flags + * + * Returns the memory region on success, otherwise returns an errno. + * Note that all DMA addresses should be created via the + * struct ib_dma_mapping_ops functions (see dma.c). + */ +struct ib_mr *hfi1_get_dma_mr(struct ib_pd *pd, int acc) +{ + struct hfi1_mr *mr = NULL; + struct ib_mr *ret; + int rval; + + if (to_ipd(pd)->user) { + ret = ERR_PTR(-EPERM); + goto bail; + } + + mr = kzalloc(sizeof(*mr), GFP_KERNEL); + if (!mr) { + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + rval = init_mregion(&mr->mr, pd, 0); + if (rval) { + ret = ERR_PTR(rval); + goto bail; + } + + + rval = hfi1_alloc_lkey(&mr->mr, 1); + if (rval) { + ret = ERR_PTR(rval); + goto bail_mregion; + } + + mr->mr.access_flags = acc; + ret = &mr->ibmr; +done: + return ret; + +bail_mregion: + deinit_mregion(&mr->mr); +bail: + kfree(mr); + goto done; +} + +static struct hfi1_mr *alloc_mr(int count, struct ib_pd *pd) +{ + struct hfi1_mr *mr; + int rval = -ENOMEM; + int m; + + /* Allocate struct plus pointers to first level page tables. */ + m = (count + HFI1_SEGSZ - 1) / HFI1_SEGSZ; + mr = kzalloc(sizeof(*mr) + m * sizeof(mr->mr.map[0]), GFP_KERNEL); + if (!mr) + goto bail; + + rval = init_mregion(&mr->mr, pd, count); + if (rval) + goto bail; + /* + * ib_reg_phys_mr() will initialize mr->ibmr except for + * lkey and rkey. + */ + rval = hfi1_alloc_lkey(&mr->mr, 0); + if (rval) + goto bail_mregion; + mr->ibmr.lkey = mr->mr.lkey; + mr->ibmr.rkey = mr->mr.lkey; +done: + return mr; + +bail_mregion: + deinit_mregion(&mr->mr); +bail: + kfree(mr); + mr = ERR_PTR(rval); + goto done; +} + +/** + * hfi1_reg_phys_mr - register a physical memory region + * @pd: protection domain for this memory region + * @buffer_list: pointer to the list of physical buffers to register + * @num_phys_buf: the number of physical buffers to register + * @iova_start: the starting address passed over IB which maps to this MR + * + * Returns the memory region on success, otherwise returns an errno. + */ +struct ib_mr *hfi1_reg_phys_mr(struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, int acc, u64 *iova_start) +{ + struct hfi1_mr *mr; + int n, m, i; + struct ib_mr *ret; + + mr = alloc_mr(num_phys_buf, pd); + if (IS_ERR(mr)) { + ret = (struct ib_mr *)mr; + goto bail; + } + + mr->mr.user_base = *iova_start; + mr->mr.iova = *iova_start; + mr->mr.access_flags = acc; + + m = 0; + n = 0; + for (i = 0; i < num_phys_buf; i++) { + mr->mr.map[m]->segs[n].vaddr = (void *) buffer_list[i].addr; + mr->mr.map[m]->segs[n].length = buffer_list[i].size; + mr->mr.length += buffer_list[i].size; + n++; + if (n == HFI1_SEGSZ) { + m++; + n = 0; + } + } + + ret = &mr->ibmr; + +bail: + return ret; +} + +/** + * hfi1_reg_user_mr - register a userspace memory region + * @pd: protection domain for this memory region + * @start: starting userspace address + * @length: length of region to register + * @mr_access_flags: access flags for this memory region + * @udata: unused by the driver + * + * Returns the memory region on success, otherwise returns an errno. + */ +struct ib_mr *hfi1_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, + u64 virt_addr, int mr_access_flags, + struct ib_udata *udata) +{ + struct hfi1_mr *mr; + struct ib_umem *umem; + struct scatterlist *sg; + int n, m, entry; + struct ib_mr *ret; + + if (length == 0) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + + umem = ib_umem_get(pd->uobject->context, start, length, + mr_access_flags, 0); + if (IS_ERR(umem)) + return (void *) umem; + + n = umem->nmap; + + mr = alloc_mr(n, pd); + if (IS_ERR(mr)) { + ret = (struct ib_mr *)mr; + ib_umem_release(umem); + goto bail; + } + + mr->mr.user_base = start; + mr->mr.iova = virt_addr; + mr->mr.length = length; + mr->mr.offset = ib_umem_offset(umem); + mr->mr.access_flags = mr_access_flags; + mr->umem = umem; + + if (is_power_of_2(umem->page_size)) + mr->mr.page_shift = ilog2(umem->page_size); + m = 0; + n = 0; + for_each_sg(umem->sg_head.sgl, sg, umem->nmap, entry) { + void *vaddr; + + vaddr = page_address(sg_page(sg)); + if (!vaddr) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + mr->mr.map[m]->segs[n].vaddr = vaddr; + mr->mr.map[m]->segs[n].length = umem->page_size; + n++; + if (n == HFI1_SEGSZ) { + m++; + n = 0; + } + } + ret = &mr->ibmr; + +bail: + return ret; +} + +/** + * hfi1_dereg_mr - unregister and free a memory region + * @ibmr: the memory region to free + * + * Returns 0 on success. + * + * Note that this is called to free MRs created by hfi1_get_dma_mr() + * or hfi1_reg_user_mr(). + */ +int hfi1_dereg_mr(struct ib_mr *ibmr) +{ + struct hfi1_mr *mr = to_imr(ibmr); + int ret = 0; + unsigned long timeout; + + hfi1_free_lkey(&mr->mr); + + hfi1_put_mr(&mr->mr); /* will set completion if last */ + timeout = wait_for_completion_timeout(&mr->mr.comp, + 5 * HZ); + if (!timeout) { + dd_dev_err( + dd_from_ibdev(mr->mr.pd->device), + "hfi1_dereg_mr timeout mr %p pd %p refcount %u\n", + mr, mr->mr.pd, atomic_read(&mr->mr.refcount)); + hfi1_get_mr(&mr->mr); + ret = -EBUSY; + goto out; + } + deinit_mregion(&mr->mr); + if (mr->umem) + ib_umem_release(mr->umem); + kfree(mr); +out: + return ret; +} + +/* + * Allocate a memory region usable with the + * IB_WR_FAST_REG_MR send work request. + * + * Return the memory region on success, otherwise return an errno. + */ +struct ib_mr *hfi1_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len) +{ + struct hfi1_mr *mr; + + mr = alloc_mr(max_page_list_len, pd); + if (IS_ERR(mr)) + return (struct ib_mr *)mr; + + return &mr->ibmr; +} + +struct ib_fast_reg_page_list * +hfi1_alloc_fast_reg_page_list(struct ib_device *ibdev, int page_list_len) +{ + unsigned size = page_list_len * sizeof(u64); + struct ib_fast_reg_page_list *pl; + + if (size > PAGE_SIZE) + return ERR_PTR(-EINVAL); + + pl = kzalloc(sizeof(*pl), GFP_KERNEL); + if (!pl) + return ERR_PTR(-ENOMEM); + + pl->page_list = kzalloc(size, GFP_KERNEL); + if (!pl->page_list) + goto err_free; + + return pl; + +err_free: + kfree(pl); + return ERR_PTR(-ENOMEM); +} + +void hfi1_free_fast_reg_page_list(struct ib_fast_reg_page_list *pl) +{ + kfree(pl->page_list); + kfree(pl); +} + +/** + * hfi1_alloc_fmr - allocate a fast memory region + * @pd: the protection domain for this memory region + * @mr_access_flags: access flags for this memory region + * @fmr_attr: fast memory region attributes + * + * Returns the memory region on success, otherwise returns an errno. + */ +struct ib_fmr *hfi1_alloc_fmr(struct ib_pd *pd, int mr_access_flags, + struct ib_fmr_attr *fmr_attr) +{ + struct hfi1_fmr *fmr; + int m; + struct ib_fmr *ret; + int rval = -ENOMEM; + + /* Allocate struct plus pointers to first level page tables. */ + m = (fmr_attr->max_pages + HFI1_SEGSZ - 1) / HFI1_SEGSZ; + fmr = kzalloc(sizeof(*fmr) + m * sizeof(fmr->mr.map[0]), GFP_KERNEL); + if (!fmr) + goto bail; + + rval = init_mregion(&fmr->mr, pd, fmr_attr->max_pages); + if (rval) + goto bail; + + /* + * ib_alloc_fmr() will initialize fmr->ibfmr except for lkey & + * rkey. + */ + rval = hfi1_alloc_lkey(&fmr->mr, 0); + if (rval) + goto bail_mregion; + fmr->ibfmr.rkey = fmr->mr.lkey; + fmr->ibfmr.lkey = fmr->mr.lkey; + /* + * Resources are allocated but no valid mapping (RKEY can't be + * used). + */ + fmr->mr.access_flags = mr_access_flags; + fmr->mr.max_segs = fmr_attr->max_pages; + fmr->mr.page_shift = fmr_attr->page_shift; + + ret = &fmr->ibfmr; +done: + return ret; + +bail_mregion: + deinit_mregion(&fmr->mr); +bail: + kfree(fmr); + ret = ERR_PTR(rval); + goto done; +} + +/** + * hfi1_map_phys_fmr - set up a fast memory region + * @ibmfr: the fast memory region to set up + * @page_list: the list of pages to associate with the fast memory region + * @list_len: the number of pages to associate with the fast memory region + * @iova: the virtual address of the start of the fast memory region + * + * This may be called from interrupt context. + */ + +int hfi1_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list, + int list_len, u64 iova) +{ + struct hfi1_fmr *fmr = to_ifmr(ibfmr); + struct hfi1_lkey_table *rkt; + unsigned long flags; + int m, n, i; + u32 ps; + int ret; + + i = atomic_read(&fmr->mr.refcount); + if (i > 2) + return -EBUSY; + + if (list_len > fmr->mr.max_segs) { + ret = -EINVAL; + goto bail; + } + rkt = &to_idev(ibfmr->device)->lk_table; + spin_lock_irqsave(&rkt->lock, flags); + fmr->mr.user_base = iova; + fmr->mr.iova = iova; + ps = 1 << fmr->mr.page_shift; + fmr->mr.length = list_len * ps; + m = 0; + n = 0; + for (i = 0; i < list_len; i++) { + fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i]; + fmr->mr.map[m]->segs[n].length = ps; + if (++n == HFI1_SEGSZ) { + m++; + n = 0; + } + } + spin_unlock_irqrestore(&rkt->lock, flags); + ret = 0; + +bail: + return ret; +} + +/** + * hfi1_unmap_fmr - unmap fast memory regions + * @fmr_list: the list of fast memory regions to unmap + * + * Returns 0 on success. + */ +int hfi1_unmap_fmr(struct list_head *fmr_list) +{ + struct hfi1_fmr *fmr; + struct hfi1_lkey_table *rkt; + unsigned long flags; + + list_for_each_entry(fmr, fmr_list, ibfmr.list) { + rkt = &to_idev(fmr->ibfmr.device)->lk_table; + spin_lock_irqsave(&rkt->lock, flags); + fmr->mr.user_base = 0; + fmr->mr.iova = 0; + fmr->mr.length = 0; + spin_unlock_irqrestore(&rkt->lock, flags); + } + return 0; +} + +/** + * hfi1_dealloc_fmr - deallocate a fast memory region + * @ibfmr: the fast memory region to deallocate + * + * Returns 0 on success. + */ +int hfi1_dealloc_fmr(struct ib_fmr *ibfmr) +{ + struct hfi1_fmr *fmr = to_ifmr(ibfmr); + int ret = 0; + unsigned long timeout; + + hfi1_free_lkey(&fmr->mr); + hfi1_put_mr(&fmr->mr); /* will set completion if last */ + timeout = wait_for_completion_timeout(&fmr->mr.comp, + 5 * HZ); + if (!timeout) { + hfi1_get_mr(&fmr->mr); + ret = -EBUSY; + goto out; + } + deinit_mregion(&fmr->mr); + kfree(fmr); +out: + return ret; +} diff --git a/drivers/staging/rdma/hfi1/opa_compat.h b/drivers/staging/rdma/hfi1/opa_compat.h new file mode 100644 index 000000000000..f64eec1c2951 --- /dev/null +++ b/drivers/staging/rdma/hfi1/opa_compat.h @@ -0,0 +1,129 @@ +#ifndef _LINUX_H +#define _LINUX_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * This header file is for OPA-specific definitions which are + * required by the HFI driver, and which aren't yet in the Linux + * IB core. We'll collect these all here, then merge them into + * the kernel when that's convenient. + */ + +/* OPA SMA attribute IDs */ +#define OPA_ATTRIB_ID_CONGESTION_INFO cpu_to_be16(0x008b) +#define OPA_ATTRIB_ID_HFI_CONGESTION_LOG cpu_to_be16(0x008f) +#define OPA_ATTRIB_ID_HFI_CONGESTION_SETTING cpu_to_be16(0x0090) +#define OPA_ATTRIB_ID_CONGESTION_CONTROL_TABLE cpu_to_be16(0x0091) + +/* OPA PMA attribute IDs */ +#define OPA_PM_ATTRIB_ID_PORT_STATUS cpu_to_be16(0x0040) +#define OPA_PM_ATTRIB_ID_CLEAR_PORT_STATUS cpu_to_be16(0x0041) +#define OPA_PM_ATTRIB_ID_DATA_PORT_COUNTERS cpu_to_be16(0x0042) +#define OPA_PM_ATTRIB_ID_ERROR_PORT_COUNTERS cpu_to_be16(0x0043) +#define OPA_PM_ATTRIB_ID_ERROR_INFO cpu_to_be16(0x0044) + +/* OPA status codes */ +#define OPA_PM_STATUS_REQUEST_TOO_LARGE cpu_to_be16(0x100) + +static inline u8 port_states_to_logical_state(struct opa_port_states *ps) +{ + return ps->portphysstate_portstate & OPA_PI_MASK_PORT_STATE; +} + +static inline u8 port_states_to_phys_state(struct opa_port_states *ps) +{ + return ((ps->portphysstate_portstate & + OPA_PI_MASK_PORT_PHYSICAL_STATE) >> 4) & 0xf; +} + +/* + * OPA port physical states + * IB Volume 1, Table 146 PortInfo/IB Volume 2 Section 5.4.2(1) PortPhysState + * values. + * + * When writing, only values 0-3 are valid, other values are ignored. + * When reading, 0 is reserved. + * + * Returned by the ibphys_portstate() routine. + */ +enum opa_port_phys_state { + IB_PORTPHYSSTATE_NOP = 0, + /* 1 is reserved */ + IB_PORTPHYSSTATE_POLLING = 2, + IB_PORTPHYSSTATE_DISABLED = 3, + IB_PORTPHYSSTATE_TRAINING = 4, + IB_PORTPHYSSTATE_LINKUP = 5, + IB_PORTPHYSSTATE_LINK_ERROR_RECOVERY = 6, + IB_PORTPHYSSTATE_PHY_TEST = 7, + /* 8 is reserved */ + OPA_PORTPHYSSTATE_OFFLINE = 9, + OPA_PORTPHYSSTATE_GANGED = 10, + OPA_PORTPHYSSTATE_TEST = 11, + OPA_PORTPHYSSTATE_MAX = 11, + /* values 12-15 are reserved/ignored */ +}; + +/* OPA_PORT_TYPE_* definitions - these belong in opa_port_info.h */ +#define OPA_PORT_TYPE_UNKNOWN 0 +#define OPA_PORT_TYPE_DISCONNECTED 1 +/* port is not currently usable, CableInfo not available */ +#define OPA_PORT_TYPE_FIXED 2 +/* A fixed backplane port in a director class switch. All OPA ASICS */ +#define OPA_PORT_TYPE_VARIABLE 3 +/* A backplane port in a blade system, possibly mixed configuration */ +#define OPA_PORT_TYPE_STANDARD 4 +/* implies a SFF-8636 defined format for CableInfo (QSFP) */ +#define OPA_PORT_TYPE_SI_PHOTONICS 5 +/* A silicon photonics module implies TBD defined format for CableInfo + * as defined by Intel SFO group */ +/* 6 - 15 are reserved */ + +#endif /* _LINUX_H */ diff --git a/drivers/staging/rdma/hfi1/pcie.c b/drivers/staging/rdma/hfi1/pcie.c new file mode 100644 index 000000000000..ac5653c0f65e --- /dev/null +++ b/drivers/staging/rdma/hfi1/pcie.c @@ -0,0 +1,1253 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/vmalloc.h> +#include <linux/aer.h> +#include <linux/module.h> + +#include "hfi.h" +#include "chip_registers.h" + +/* link speed vector for Gen3 speed - not in Linux headers */ +#define GEN1_SPEED_VECTOR 0x1 +#define GEN2_SPEED_VECTOR 0x2 +#define GEN3_SPEED_VECTOR 0x3 + +/* + * This file contains PCIe utility routines. + */ + +/* + * Code to adjust PCIe capabilities. + */ +static void tune_pcie_caps(struct hfi1_devdata *); + +/* + * Do all the common PCIe setup and initialization. + * devdata is not yet allocated, and is not allocated until after this + * routine returns success. Therefore dd_dev_err() can't be used for error + * printing. + */ +int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + + ret = pci_enable_device(pdev); + if (ret) { + /* + * This can happen (in theory) iff: + * We did a chip reset, and then failed to reprogram the + * BAR, or the chip reset due to an internal error. We then + * unloaded the driver and reloaded it. + * + * Both reset cases set the BAR back to initial state. For + * the latter case, the AER sticky error bit at offset 0x718 + * should be set, but the Linux kernel doesn't yet know + * about that, it appears. If the original BAR was retained + * in the kernel data structures, this may be OK. + */ + hfi1_early_err(&pdev->dev, "pci enable failed: error %d\n", + -ret); + goto done; + } + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret) { + hfi1_early_err(&pdev->dev, + "pci_request_regions fails: err %d\n", -ret); + goto bail; + } + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) { + /* + * If the 64 bit setup fails, try 32 bit. Some systems + * do not setup 64 bit maps on systems with 2GB or less + * memory installed. + */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to set DMA mask: %d\n", ret); + goto bail; + } + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + } else + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to set DMA consistent mask: %d\n", ret); + goto bail; + } + + pci_set_master(pdev); + ret = pci_enable_pcie_error_reporting(pdev); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to enable pcie error reporting: %d\n", + ret); + ret = 0; + } + goto done; + +bail: + hfi1_pcie_cleanup(pdev); +done: + return ret; +} + +/* + * Clean what was done in hfi1_pcie_init() + */ +void hfi1_pcie_cleanup(struct pci_dev *pdev) +{ + pci_disable_device(pdev); + /* + * Release regions should be called after the disable. OK to + * call if request regions has not been called or failed. + */ + pci_release_regions(pdev); +} + +/* + * Do remaining PCIe setup, once dd is allocated, and save away + * fields required to re-initialize after a chip reset, or for + * various other purposes + */ +int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned long len; + resource_size_t addr; + + dd->pcidev = pdev; + pci_set_drvdata(pdev, dd); + + addr = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + + /* + * The TXE PIO buffers are at the tail end of the chip space. + * Cut them off and map them separately. + */ + + /* sanity check vs expectations */ + if (len != TXE_PIO_SEND + TXE_PIO_SIZE) { + dd_dev_err(dd, "chip PIO range does not match\n"); + return -EINVAL; + } + + dd->kregbase = ioremap_nocache(addr, TXE_PIO_SEND); + if (!dd->kregbase) + return -ENOMEM; + + dd->piobase = ioremap_wc(addr + TXE_PIO_SEND, TXE_PIO_SIZE); + if (!dd->piobase) { + iounmap(dd->kregbase); + return -ENOMEM; + } + + dd->flags |= HFI1_PRESENT; /* now register routines work */ + + dd->kregend = dd->kregbase + TXE_PIO_SEND; + dd->physaddr = addr; /* used for io_remap, etc. */ + + /* + * Re-map the chip's RcvArray as write-combining to allow us + * to write an entire cacheline worth of entries in one shot. + * If this re-map fails, just continue - the RcvArray programming + * function will handle both cases. + */ + dd->chip_rcv_array_count = read_csr(dd, RCV_ARRAY_CNT); + dd->rcvarray_wc = ioremap_wc(addr + RCV_ARRAY, + dd->chip_rcv_array_count * 8); + dd_dev_info(dd, "WC Remapped RcvArray: %p\n", dd->rcvarray_wc); + /* + * Save BARs and command to rewrite after device reset. + */ + dd->pcibar0 = addr; + dd->pcibar1 = addr >> 32; + pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom); + pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command); + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &dd->pcie_devctl); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL, &dd->pcie_lnkctl); + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2, + &dd->pcie_devctl2); + pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0); + pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, + &dd->pci_lnkctl3); + pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2); + + return 0; +} + +/* + * Do PCIe cleanup related to dd, after chip-specific cleanup, etc. Just prior + * to releasing the dd memory. + * Void because all of the core pcie cleanup functions are void. + */ +void hfi1_pcie_ddcleanup(struct hfi1_devdata *dd) +{ + u64 __iomem *base = (void __iomem *) dd->kregbase; + + dd->flags &= ~HFI1_PRESENT; + dd->kregbase = NULL; + iounmap(base); + if (dd->rcvarray_wc) + iounmap(dd->rcvarray_wc); + if (dd->piobase) + iounmap(dd->piobase); + + pci_set_drvdata(dd->pcidev, NULL); +} + +/* + * Do a Function Level Reset (FLR) on the device. + * Based on static function drivers/pci/pci.c:pcie_flr(). + */ +void hfi1_pcie_flr(struct hfi1_devdata *dd) +{ + int i; + u16 status; + + /* no need to check for the capability - we know the device has it */ + + /* wait for Transaction Pending bit to clear, at most a few ms */ + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto clear; + } + + dd_dev_err(dd, "Transaction Pending bit is not clearing, proceeding with reset anyway\n"); + +clear: + pcie_capability_set_word(dd->pcidev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + /* PCIe spec requires the function to be back within 100ms */ + msleep(100); +} + +static void msix_setup(struct hfi1_devdata *dd, int pos, u32 *msixcnt, + struct hfi1_msix_entry *hfi1_msix_entry) +{ + int ret; + int nvec = *msixcnt; + struct msix_entry *msix_entry; + int i; + + /* We can't pass hfi1_msix_entry array to msix_setup + * so use a dummy msix_entry array and copy the allocated + * irq back to the hfi1_msix_entry array. */ + msix_entry = kmalloc_array(nvec, sizeof(*msix_entry), GFP_KERNEL); + if (!msix_entry) { + ret = -ENOMEM; + goto do_intx; + } + + for (i = 0; i < nvec; i++) + msix_entry[i] = hfi1_msix_entry[i].msix; + + ret = pci_enable_msix_range(dd->pcidev, msix_entry, 1, nvec); + if (ret < 0) + goto free_msix_entry; + nvec = ret; + + for (i = 0; i < nvec; i++) + hfi1_msix_entry[i].msix = msix_entry[i]; + + kfree(msix_entry); + *msixcnt = nvec; + return; + +free_msix_entry: + kfree(msix_entry); + +do_intx: + dd_dev_err(dd, "pci_enable_msix_range %d vectors failed: %d, falling back to INTx\n", + nvec, ret); + *msixcnt = 0; + hfi1_enable_intx(dd->pcidev); + +} + +/* return the PCIe link speed from the given link status */ +static u32 extract_speed(u16 linkstat) +{ + u32 speed; + + switch (linkstat & PCI_EXP_LNKSTA_CLS) { + default: /* not defined, assume Gen1 */ + case PCI_EXP_LNKSTA_CLS_2_5GB: + speed = 2500; /* Gen 1, 2.5GHz */ + break; + case PCI_EXP_LNKSTA_CLS_5_0GB: + speed = 5000; /* Gen 2, 5GHz */ + break; + case GEN3_SPEED_VECTOR: + speed = 8000; /* Gen 3, 8GHz */ + break; + } + return speed; +} + +/* return the PCIe link speed from the given link status */ +static u32 extract_width(u16 linkstat) +{ + return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; +} + +/* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */ +static void update_lbus_info(struct hfi1_devdata *dd) +{ + u16 linkstat; + + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat); + dd->lbus_width = extract_width(linkstat); + dd->lbus_speed = extract_speed(linkstat); + snprintf(dd->lbus_info, sizeof(dd->lbus_info), + "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width); +} + +/* + * Read in the current PCIe link width and speed. Find if the link is + * Gen3 capable. + */ +int pcie_speeds(struct hfi1_devdata *dd) +{ + u32 linkcap; + + if (!pci_is_pcie(dd->pcidev)) { + dd_dev_err(dd, "Can't find PCI Express capability!\n"); + return -EINVAL; + } + + /* find if our max speed is Gen3 and parent supports Gen3 speeds */ + dd->link_gen3_capable = 1; + + pcie_capability_read_dword(dd->pcidev, PCI_EXP_LNKCAP, &linkcap); + if ((linkcap & PCI_EXP_LNKCAP_SLS) != GEN3_SPEED_VECTOR) { + dd_dev_info(dd, + "This HFI is not Gen3 capable, max speed 0x%x, need 0x3\n", + linkcap & PCI_EXP_LNKCAP_SLS); + dd->link_gen3_capable = 0; + } + + /* + * bus->max_bus_speed is set from the bridge's linkcap Max Link Speed + */ + if (dd->pcidev->bus->max_bus_speed != PCIE_SPEED_8_0GT) { + dd_dev_info(dd, "Parent PCIe bridge does not support Gen3\n"); + dd->link_gen3_capable = 0; + } + + /* obtain the link width and current speed */ + update_lbus_info(dd); + + /* check against expected pcie width and complain if "wrong" */ + if (dd->lbus_width < 16) + dd_dev_err(dd, "PCIe width %u (x16 HFI)\n", dd->lbus_width); + + return 0; +} + +/* + * Returns in *nent: + * - actual number of interrupts allocated + * - 0 if fell back to INTx. + */ +void request_msix(struct hfi1_devdata *dd, u32 *nent, + struct hfi1_msix_entry *entry) +{ + int pos; + + pos = dd->pcidev->msix_cap; + if (*nent && pos) { + msix_setup(dd, pos, nent, entry); + /* did it, either MSI-X or INTx */ + } else { + *nent = 0; + hfi1_enable_intx(dd->pcidev); + } + + tune_pcie_caps(dd); +} + +/* + * Disable MSI-X. + */ +void hfi1_nomsix(struct hfi1_devdata *dd) +{ + pci_disable_msix(dd->pcidev); +} + +void hfi1_enable_intx(struct pci_dev *pdev) +{ + /* first, turn on INTx */ + pci_intx(pdev, 1); + /* then turn off MSI-X */ + pci_disable_msix(pdev); +} + +/* restore command and BARs after a reset has wiped them out */ +void restore_pci_variables(struct hfi1_devdata *dd) +{ + pci_write_config_word(dd->pcidev, PCI_COMMAND, dd->pci_command); + pci_write_config_dword(dd->pcidev, + PCI_BASE_ADDRESS_0, dd->pcibar0); + pci_write_config_dword(dd->pcidev, + PCI_BASE_ADDRESS_1, dd->pcibar1); + pci_write_config_dword(dd->pcidev, + PCI_ROM_ADDRESS, dd->pci_rom); + pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL, dd->pcie_devctl); + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL, dd->pcie_lnkctl); + pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL2, + dd->pcie_devctl2); + pci_write_config_dword(dd->pcidev, PCI_CFG_MSIX0, dd->pci_msix0); + pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, + dd->pci_lnkctl3); + pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2); +} + + +/* + * BIOS may not set PCIe bus-utilization parameters for best performance. + * Check and optionally adjust them to maximize our throughput. + */ +static int hfi1_pcie_caps; +module_param_named(pcie_caps, hfi1_pcie_caps, int, S_IRUGO); +MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)"); + +static void tune_pcie_caps(struct hfi1_devdata *dd) +{ + struct pci_dev *parent; + u16 rc_mpss, rc_mps, ep_mpss, ep_mps; + u16 rc_mrrs, ep_mrrs, max_mrrs; + + /* Find out supported and configured values for parent (root) */ + parent = dd->pcidev->bus->self; + if (!pci_is_root_bus(parent->bus)) { + dd_dev_info(dd, "Parent not root\n"); + return; + } + + if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev)) + return; + rc_mpss = parent->pcie_mpss; + rc_mps = ffs(pcie_get_mps(parent)) - 8; + /* Find out supported and configured values for endpoint (us) */ + ep_mpss = dd->pcidev->pcie_mpss; + ep_mps = ffs(pcie_get_mps(dd->pcidev)) - 8; + + /* Find max payload supported by root, endpoint */ + if (rc_mpss > ep_mpss) + rc_mpss = ep_mpss; + + /* If Supported greater than limit in module param, limit it */ + if (rc_mpss > (hfi1_pcie_caps & 7)) + rc_mpss = hfi1_pcie_caps & 7; + /* If less than (allowed, supported), bump root payload */ + if (rc_mpss > rc_mps) { + rc_mps = rc_mpss; + pcie_set_mps(parent, 128 << rc_mps); + } + /* If less than (allowed, supported), bump endpoint payload */ + if (rc_mpss > ep_mps) { + ep_mps = rc_mpss; + pcie_set_mps(dd->pcidev, 128 << ep_mps); + } + + /* + * Now the Read Request size. + * No field for max supported, but PCIe spec limits it to 4096, + * which is code '5' (log2(4096) - 7) + */ + max_mrrs = 5; + if (max_mrrs > ((hfi1_pcie_caps >> 4) & 7)) + max_mrrs = (hfi1_pcie_caps >> 4) & 7; + + max_mrrs = 128 << max_mrrs; + rc_mrrs = pcie_get_readrq(parent); + ep_mrrs = pcie_get_readrq(dd->pcidev); + + if (max_mrrs > rc_mrrs) { + rc_mrrs = max_mrrs; + pcie_set_readrq(parent, rc_mrrs); + } + if (max_mrrs > ep_mrrs) { + ep_mrrs = max_mrrs; + pcie_set_readrq(dd->pcidev, ep_mrrs); + } +} +/* End of PCIe capability tuning */ + +/* + * From here through hfi1_pci_err_handler definition is invoked via + * PCI error infrastructure, registered via pci + */ +static pci_ers_result_t +pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED; + + switch (state) { + case pci_channel_io_normal: + dd_dev_info(dd, "State Normal, ignoring\n"); + break; + + case pci_channel_io_frozen: + dd_dev_info(dd, "State Frozen, requesting reset\n"); + pci_disable_device(pdev); + ret = PCI_ERS_RESULT_NEED_RESET; + break; + + case pci_channel_io_perm_failure: + if (dd) { + dd_dev_info(dd, "State Permanent Failure, disabling\n"); + /* no more register accesses! */ + dd->flags &= ~HFI1_PRESENT; + hfi1_disable_after_error(dd); + } + /* else early, or other problem */ + ret = PCI_ERS_RESULT_DISCONNECT; + break; + + default: /* shouldn't happen */ + dd_dev_info(dd, "HFI1 PCI errors detected (state %d)\n", + state); + break; + } + return ret; +} + +static pci_ers_result_t +pci_mmio_enabled(struct pci_dev *pdev) +{ + u64 words = 0U; + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED; + + if (dd && dd->pport) { + words = read_port_cntr(dd->pport, C_RX_WORDS, CNTR_INVALID_VL); + if (words == ~0ULL) + ret = PCI_ERS_RESULT_NEED_RESET; + dd_dev_info(dd, + "HFI1 mmio_enabled function called, read wordscntr %Lx, returning %d\n", + words, ret); + } + return ret; +} + +static pci_ers_result_t +pci_slot_reset(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 slot_reset function called, ignored\n"); + return PCI_ERS_RESULT_CAN_RECOVER; +} + +static pci_ers_result_t +pci_link_reset(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 link_reset function called, ignored\n"); + return PCI_ERS_RESULT_CAN_RECOVER; +} + +static void +pci_resume(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 resume function called\n"); + pci_cleanup_aer_uncorrect_error_status(pdev); + /* + * Running jobs will fail, since it's asynchronous + * unlike sysfs-requested reset. Better than + * doing nothing. + */ + hfi1_init(dd, 1); /* same as re-init after reset */ +} + +const struct pci_error_handlers hfi1_pci_err_handler = { + .error_detected = pci_error_detected, + .mmio_enabled = pci_mmio_enabled, + .link_reset = pci_link_reset, + .slot_reset = pci_slot_reset, + .resume = pci_resume, +}; + +/*============================================================================*/ +/* PCIe Gen3 support */ + +/* + * This code is separated out because it is expected to be removed in the + * final shipping product. If not, then it will be revisited and items + * will be moved to more standard locations. + */ + +/* ASIC_PCI_SD_HOST_STATUS.FW_DNLD_STS field values */ +#define DL_STATUS_HFI0 0x1 /* hfi0 firmware download complete */ +#define DL_STATUS_HFI1 0x2 /* hfi1 firmware download complete */ +#define DL_STATUS_BOTH 0x3 /* hfi0 and hfi1 firmware download complete */ + +/* ASIC_PCI_SD_HOST_STATUS.FW_DNLD_ERR field values */ +#define DL_ERR_NONE 0x0 /* no error */ +#define DL_ERR_SWAP_PARITY 0x1 /* parity error in SerDes interrupt */ + /* or response data */ +#define DL_ERR_DISABLED 0x2 /* hfi disabled */ +#define DL_ERR_SECURITY 0x3 /* security check failed */ +#define DL_ERR_SBUS 0x4 /* SBus status error */ +#define DL_ERR_XFR_PARITY 0x5 /* parity error during ROM transfer*/ + +/* gasket block secondary bus reset delay */ +#define SBR_DELAY_US 200000 /* 200ms */ + +/* mask for PCIe capability register lnkctl2 target link speed */ +#define LNKCTL2_TARGET_LINK_SPEED_MASK 0xf + +static uint pcie_target = 3; +module_param(pcie_target, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_target, "PCIe target speed (0 skip, 1-3 Gen1-3)"); + +static uint pcie_force; +module_param(pcie_force, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_force, "Force driver to do a PCIe firmware download even if already at target speed"); + +static uint pcie_retry = 5; +module_param(pcie_retry, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_retry, "Driver will try this many times to reach requested speed"); + +#define UNSET_PSET 255 +#define DEFAULT_DISCRETE_PSET 2 /* discrete HFI */ +#define DEFAULT_MCP_PSET 4 /* MCP HFI */ +static uint pcie_pset = UNSET_PSET; +module_param(pcie_pset, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_pset, "PCIe Eq Pset value to use, range is 0-10"); + +/* equalization columns */ +#define PREC 0 +#define ATTN 1 +#define POST 2 + +/* discrete silicon preliminary equalization values */ +static const u8 discrete_preliminary_eq[11][3] = { + /* prec attn post */ + { 0x00, 0x00, 0x12 }, /* p0 */ + { 0x00, 0x00, 0x0c }, /* p1 */ + { 0x00, 0x00, 0x0f }, /* p2 */ + { 0x00, 0x00, 0x09 }, /* p3 */ + { 0x00, 0x00, 0x00 }, /* p4 */ + { 0x06, 0x00, 0x00 }, /* p5 */ + { 0x09, 0x00, 0x00 }, /* p6 */ + { 0x06, 0x00, 0x0f }, /* p7 */ + { 0x09, 0x00, 0x09 }, /* p8 */ + { 0x0c, 0x00, 0x00 }, /* p9 */ + { 0x00, 0x00, 0x18 }, /* p10 */ +}; + +/* integrated silicon preliminary equalization values */ +static const u8 integrated_preliminary_eq[11][3] = { + /* prec attn post */ + { 0x00, 0x1e, 0x07 }, /* p0 */ + { 0x00, 0x1e, 0x05 }, /* p1 */ + { 0x00, 0x1e, 0x06 }, /* p2 */ + { 0x00, 0x1e, 0x04 }, /* p3 */ + { 0x00, 0x1e, 0x00 }, /* p4 */ + { 0x03, 0x1e, 0x00 }, /* p5 */ + { 0x04, 0x1e, 0x00 }, /* p6 */ + { 0x03, 0x1e, 0x06 }, /* p7 */ + { 0x03, 0x1e, 0x04 }, /* p8 */ + { 0x05, 0x1e, 0x00 }, /* p9 */ + { 0x00, 0x1e, 0x0a }, /* p10 */ +}; + +/* helper to format the value to write to hardware */ +#define eq_value(pre, curr, post) \ + ((((u32)(pre)) << \ + PCIE_CFG_REG_PL102_GEN3_EQ_PRE_CURSOR_PSET_SHIFT) \ + | (((u32)(curr)) << PCIE_CFG_REG_PL102_GEN3_EQ_CURSOR_PSET_SHIFT) \ + | (((u32)(post)) << \ + PCIE_CFG_REG_PL102_GEN3_EQ_POST_CURSOR_PSET_SHIFT)) + +/* + * Load the given EQ preset table into the PCIe hardware. + */ +static int load_eq_table(struct hfi1_devdata *dd, const u8 eq[11][3], u8 fs, + u8 div) +{ + struct pci_dev *pdev = dd->pcidev; + u32 hit_error = 0; + u32 violation; + u32 i; + u8 c_minus1, c0, c_plus1; + + for (i = 0; i < 11; i++) { + /* set index */ + pci_write_config_dword(pdev, PCIE_CFG_REG_PL103, i); + /* write the value */ + c_minus1 = eq[i][PREC] / div; + c0 = fs - (eq[i][PREC] / div) - (eq[i][POST] / div); + c_plus1 = eq[i][POST] / div; + pci_write_config_dword(pdev, PCIE_CFG_REG_PL102, + eq_value(c_minus1, c0, c_plus1)); + /* check if these coefficients violate EQ rules */ + pci_read_config_dword(dd->pcidev, PCIE_CFG_REG_PL105, + &violation); + if (violation + & PCIE_CFG_REG_PL105_GEN3_EQ_VIOLATE_COEF_RULES_SMASK){ + if (hit_error == 0) { + dd_dev_err(dd, + "Gen3 EQ Table Coefficient rule violations\n"); + dd_dev_err(dd, " prec attn post\n"); + } + dd_dev_err(dd, " p%02d: %02x %02x %02x\n", + i, (u32)eq[i][0], (u32)eq[i][1], (u32)eq[i][2]); + dd_dev_err(dd, " %02x %02x %02x\n", + (u32)c_minus1, (u32)c0, (u32)c_plus1); + hit_error = 1; + } + } + if (hit_error) + return -EINVAL; + return 0; +} + +/* + * Steps to be done after the PCIe firmware is downloaded and + * before the SBR for the Pcie Gen3. + * The hardware mutex is already being held. + */ +static void pcie_post_steps(struct hfi1_devdata *dd) +{ + int i; + + set_sbus_fast_mode(dd); + /* + * Write to the PCIe PCSes to set the G3_LOCKED_NEXT bits to 1. + * This avoids a spurious framing error that can otherwise be + * generated by the MAC layer. + * + * Use individual addresses since no broadcast is set up. + */ + for (i = 0; i < NUM_PCIE_SERDES; i++) { + sbus_request(dd, pcie_pcs_addrs[dd->hfi1_id][i], + 0x03, WRITE_SBUS_RECEIVER, 0x00022132); + } + + clear_sbus_fast_mode(dd); +} + +/* + * Trigger a secondary bus reset (SBR) on ourselves using our parent. + * + * Based on pci_parent_bus_reset() which is not exported by the + * kernel core. + */ +static int trigger_sbr(struct hfi1_devdata *dd) +{ + struct pci_dev *dev = dd->pcidev; + struct pci_dev *pdev; + + /* need a parent */ + if (!dev->bus->self) { + dd_dev_err(dd, "%s: no parent device\n", __func__); + return -ENOTTY; + } + + /* should not be anyone else on the bus */ + list_for_each_entry(pdev, &dev->bus->devices, bus_list) + if (pdev != dev) { + dd_dev_err(dd, + "%s: another device is on the same bus\n", + __func__); + return -ENOTTY; + } + + /* + * A secondary bus reset (SBR) issues a hot reset to our device. + * The following routine does a 1s wait after the reset is dropped + * per PCI Trhfa (recovery time). PCIe 3.0 section 6.6.1 - + * Conventional Reset, paragraph 3, line 35 also says that a 1s + * delay after a reset is required. Per spec requirements, + * the link is either working or not after that point. + */ + pci_reset_bridge_secondary_bus(dev->bus->self); + + return 0; +} + +/* + * Write the given gasket interrupt register. + */ +static void write_gasket_interrupt(struct hfi1_devdata *dd, int index, + u16 code, u16 data) +{ + write_csr(dd, ASIC_PCIE_SD_INTRPT_LIST + (index * 8), + (((u64)code << ASIC_PCIE_SD_INTRPT_LIST_INTRPT_CODE_SHIFT) + |((u64)data << ASIC_PCIE_SD_INTRPT_LIST_INTRPT_DATA_SHIFT))); +} + +/* + * Tell the gasket logic how to react to the reset. + */ +static void arm_gasket_logic(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = (((u64)1 << dd->hfi1_id) + << ASIC_PCIE_SD_HOST_CMD_INTRPT_CMD_SHIFT) + | ((u64)pcie_serdes_broadcast[dd->hfi1_id] + << ASIC_PCIE_SD_HOST_CMD_SBUS_RCVR_ADDR_SHIFT + | ASIC_PCIE_SD_HOST_CMD_SBR_MODE_SMASK + | ((u64)SBR_DELAY_US & ASIC_PCIE_SD_HOST_CMD_TIMER_MASK) + << ASIC_PCIE_SD_HOST_CMD_TIMER_SHIFT + ); + write_csr(dd, ASIC_PCIE_SD_HOST_CMD, reg); + /* read back to push the write */ + read_csr(dd, ASIC_PCIE_SD_HOST_CMD); +} + +/* + * Do all the steps needed to transition the PCIe link to Gen3 speed. + */ +int do_pcie_gen3_transition(struct hfi1_devdata *dd) +{ + struct pci_dev *parent; + u64 fw_ctrl; + u64 reg, therm; + u32 reg32, fs, lf; + u32 status, err; + int ret; + int do_retry, retry_count = 0; + uint default_pset; + u16 target_vector, target_speed; + u16 lnkctl, lnkctl2, vendor; + u8 nsbr = 1; + u8 div; + const u8 (*eq)[3]; + int return_error = 0; + + /* PCIe Gen3 is for the ASIC only */ + if (dd->icode != ICODE_RTL_SILICON) + return 0; + + if (pcie_target == 1) { /* target Gen1 */ + target_vector = GEN1_SPEED_VECTOR; + target_speed = 2500; + } else if (pcie_target == 2) { /* target Gen2 */ + target_vector = GEN2_SPEED_VECTOR; + target_speed = 5000; + } else if (pcie_target == 3) { /* target Gen3 */ + target_vector = GEN3_SPEED_VECTOR; + target_speed = 8000; + } else { + /* off or invalid target - skip */ + dd_dev_info(dd, "%s: Skipping PCIe transition\n", __func__); + return 0; + } + + /* if already at target speed, done (unless forced) */ + if (dd->lbus_speed == target_speed) { + dd_dev_info(dd, "%s: PCIe already at gen%d, %s\n", __func__, + pcie_target, + pcie_force ? "re-doing anyway" : "skipping"); + if (!pcie_force) + return 0; + } + + /* + * A0 needs an additional SBR + */ + if (is_a0(dd)) + nsbr++; + + /* + * Do the Gen3 transition. Steps are those of the PCIe Gen3 + * recipe. + */ + + /* step 1: pcie link working in gen1/gen2 */ + + /* step 2: if either side is not capable of Gen3, done */ + if (pcie_target == 3 && !dd->link_gen3_capable) { + dd_dev_err(dd, "The PCIe link is not Gen3 capable\n"); + ret = -ENOSYS; + goto done_no_mutex; + } + + /* hold the HW mutex across the firmware download and SBR */ + ret = acquire_hw_mutex(dd); + if (ret) + return ret; + + /* make sure thermal polling is not causing interrupts */ + therm = read_csr(dd, ASIC_CFG_THERM_POLL_EN); + if (therm) { + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x0); + msleep(100); + dd_dev_info(dd, "%s: Disabled therm polling\n", + __func__); + } + + /* step 3: download SBus Master firmware */ + /* step 4: download PCIe Gen3 SerDes firmware */ +retry: + dd_dev_info(dd, "%s: downloading firmware\n", __func__); + ret = load_pcie_firmware(dd); + if (ret) + goto done; + + /* step 5: set up device parameter settings */ + dd_dev_info(dd, "%s: setting PCIe registers\n", __func__); + + /* + * PcieCfgSpcie1 - Link Control 3 + * Leave at reset value. No need to set PerfEq - link equalization + * will be performed automatically after the SBR when the target + * speed is 8GT/s. + */ + + /* clear all 16 per-lane error bits (PCIe: Lane Error Status) */ + pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, 0xffff); + + /* step 5a: Set Synopsys Port Logic registers */ + + /* + * PcieCfgRegPl2 - Port Force Link + * + * Set the low power field to 0x10 to avoid unnecessary power + * management messages. All other fields are zero. + */ + reg32 = 0x10ul << PCIE_CFG_REG_PL2_LOW_PWR_ENT_CNT_SHIFT; + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL2, reg32); + + /* + * PcieCfgRegPl100 - Gen3 Control + * + * turn off PcieCfgRegPl100.Gen3ZRxDcNonCompl + * turn on PcieCfgRegPl100.EqEieosCnt (erratum) + * Everything else zero. + */ + reg32 = PCIE_CFG_REG_PL100_EQ_EIEOS_CNT_SMASK; + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL100, reg32); + + /* + * PcieCfgRegPl101 - Gen3 EQ FS and LF + * PcieCfgRegPl102 - Gen3 EQ Presets to Coefficients Mapping + * PcieCfgRegPl103 - Gen3 EQ Preset Index + * PcieCfgRegPl105 - Gen3 EQ Status + * + * Give initial EQ settings. + */ + if (dd->pcidev->device == PCI_DEVICE_ID_INTEL0) { /* discrete */ + /* 1000mV, FS=24, LF = 8 */ + fs = 24; + lf = 8; + div = 3; + eq = discrete_preliminary_eq; + default_pset = DEFAULT_DISCRETE_PSET; + } else { + /* 400mV, FS=29, LF = 9 */ + fs = 29; + lf = 9; + div = 1; + eq = integrated_preliminary_eq; + default_pset = DEFAULT_MCP_PSET; + } + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL101, + (fs << PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_FS_SHIFT) + | (lf << PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_LF_SHIFT)); + ret = load_eq_table(dd, eq, fs, div); + if (ret) + goto done; + + /* + * PcieCfgRegPl106 - Gen3 EQ Control + * + * Set Gen3EqPsetReqVec, leave other fields 0. + */ + if (pcie_pset == UNSET_PSET) + pcie_pset = default_pset; + if (pcie_pset > 10) { /* valid range is 0-10, inclusive */ + dd_dev_err(dd, "%s: Invalid Eq Pset %u, setting to %d\n", + __func__, pcie_pset, default_pset); + pcie_pset = default_pset; + } + dd_dev_info(dd, "%s: using EQ Pset %u\n", __func__, pcie_pset); + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL106, + ((1 << pcie_pset) + << PCIE_CFG_REG_PL106_GEN3_EQ_PSET_REQ_VEC_SHIFT) + | PCIE_CFG_REG_PL106_GEN3_EQ_EVAL2MS_DISABLE_SMASK + | PCIE_CFG_REG_PL106_GEN3_EQ_PHASE23_EXIT_MODE_SMASK); + + /* + * step 5b: Do post firmware download steps via SBus + */ + dd_dev_info(dd, "%s: doing pcie post steps\n", __func__); + pcie_post_steps(dd); + + /* + * step 5c: Program gasket interrupts + */ + /* set the Rx Bit Rate to REFCLK ratio */ + write_gasket_interrupt(dd, 0, 0x0006, 0x0050); + /* disable pCal for PCIe Gen3 RX equalization */ + write_gasket_interrupt(dd, 1, 0x0026, 0x5b01); + /* + * Enable iCal for PCIe Gen3 RX equalization, and set which + * evaluation of RX_EQ_EVAL will launch the iCal procedure. + */ + write_gasket_interrupt(dd, 2, 0x0026, 0x5202); + /* terminate list */ + write_gasket_interrupt(dd, 3, 0x0000, 0x0000); + + /* + * step 5d: program XMT margin + * Right now, leave the default alone. To change, do a + * read-modify-write of: + * CcePcieCtrl.XmtMargin + * CcePcieCtrl.XmitMarginOverwriteEnable + */ + + /* step 5e: disable active state power management (ASPM) */ + dd_dev_info(dd, "%s: clearing ASPM\n", __func__); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL, &lnkctl); + lnkctl &= ~PCI_EXP_LNKCTL_ASPMC; + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL, lnkctl); + + /* + * step 5f: clear DirectSpeedChange + * PcieCfgRegPl67.DirectSpeedChange must be zero to prevent the + * change in the speed target from starting before we are ready. + * This field defaults to 0 and we are not changing it, so nothing + * needs to be done. + */ + + /* step 5g: Set target link speed */ + /* + * Set target link speed to be target on both device and parent. + * On setting the parent: Some system BIOSs "helpfully" set the + * parent target speed to Gen2 to match the ASIC's initial speed. + * We can set the target Gen3 because we have already checked + * that it is Gen3 capable earlier. + */ + dd_dev_info(dd, "%s: setting parent target link speed\n", __func__); + parent = dd->pcidev->bus->self; + pcie_capability_read_word(parent, PCI_EXP_LNKCTL2, &lnkctl2); + dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, + (u32)lnkctl2); + /* only write to parent if target is not as high as ours */ + if ((lnkctl2 & LNKCTL2_TARGET_LINK_SPEED_MASK) < target_vector) { + lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; + lnkctl2 |= target_vector; + dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, + (u32)lnkctl2); + pcie_capability_write_word(parent, PCI_EXP_LNKCTL2, lnkctl2); + } else { + dd_dev_info(dd, "%s: ..target speed is OK\n", __func__); + } + + dd_dev_info(dd, "%s: setting target link speed\n", __func__); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2); + dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, + (u32)lnkctl2); + lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; + lnkctl2 |= target_vector; + dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, + (u32)lnkctl2); + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2); + + /* step 5h: arm gasket logic */ + /* hold DC in reset across the SBR */ + write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_DC_RESET_SMASK); + (void) read_csr(dd, CCE_DC_CTRL); /* DC reset hold */ + /* save firmware control across the SBR */ + fw_ctrl = read_csr(dd, MISC_CFG_FW_CTRL); + + dd_dev_info(dd, "%s: arming gasket logic\n", __func__); + arm_gasket_logic(dd); + + /* + * step 6: quiesce PCIe link + * The chip has already been reset, so there will be no traffic + * from the chip. Linux has no easy way to enforce that it will + * not try to access the device, so we just need to hope it doesn't + * do it while we are doing the reset. + */ + + /* + * step 7: initiate the secondary bus reset (SBR) + * step 8: hardware brings the links back up + * step 9: wait for link speed transition to be complete + */ + dd_dev_info(dd, "%s: calling trigger_sbr\n", __func__); + ret = trigger_sbr(dd); + if (ret) + goto done; + + /* step 10: decide what to do next */ + + /* check if we can read PCI space */ + ret = pci_read_config_word(dd->pcidev, PCI_VENDOR_ID, &vendor); + if (ret) { + dd_dev_info(dd, + "%s: read of VendorID failed after SBR, err %d\n", + __func__, ret); + return_error = 1; + goto done; + } + if (vendor == 0xffff) { + dd_dev_info(dd, "%s: VendorID is all 1s after SBR\n", __func__); + return_error = 1; + ret = -EIO; + goto done; + } + + /* restore PCI space registers we know were reset */ + dd_dev_info(dd, "%s: calling restore_pci_variables\n", __func__); + restore_pci_variables(dd); + /* restore firmware control */ + write_csr(dd, MISC_CFG_FW_CTRL, fw_ctrl); + + /* + * Check the gasket block status. + * + * This is the first CSR read after the SBR. If the read returns + * all 1s (fails), the link did not make it back. + * + * Once we're sure we can read and write, clear the DC reset after + * the SBR. Then check for any per-lane errors. Then look over + * the status. + */ + reg = read_csr(dd, ASIC_PCIE_SD_HOST_STATUS); + dd_dev_info(dd, "%s: gasket block status: 0x%llx\n", __func__, reg); + if (reg == ~0ull) { /* PCIe read failed/timeout */ + dd_dev_err(dd, "SBR failed - unable to read from device\n"); + return_error = 1; + ret = -ENOSYS; + goto done; + } + + /* clear the DC reset */ + write_csr(dd, CCE_DC_CTRL, 0); + /* Set the LED off */ + if (is_a0(dd)) + setextled(dd, 0); + + /* check for any per-lane errors */ + pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, ®32); + dd_dev_info(dd, "%s: per-lane errors: 0x%x\n", __func__, reg32); + + /* extract status, look for our HFI */ + status = (reg >> ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_SHIFT) + & ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_MASK; + if ((status & (1 << dd->hfi1_id)) == 0) { + dd_dev_err(dd, + "%s: gasket status 0x%x, expecting 0x%x\n", + __func__, status, 1 << dd->hfi1_id); + ret = -EIO; + goto done; + } + + /* extract error */ + err = (reg >> ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_SHIFT) + & ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_MASK; + if (err) { + dd_dev_err(dd, "%s: gasket error %d\n", __func__, err); + ret = -EIO; + goto done; + } + + /* update our link information cache */ + update_lbus_info(dd); + dd_dev_info(dd, "%s: new speed and width: %s\n", __func__, + dd->lbus_info); + + if (dd->lbus_speed != target_speed) { /* not target */ + /* maybe retry */ + do_retry = retry_count < pcie_retry; + dd_dev_err(dd, "PCIe link speed did not switch to Gen%d%s\n", + pcie_target, do_retry ? ", retrying" : ""); + retry_count++; + if (do_retry) { + msleep(100); /* allow time to settle */ + goto retry; + } + ret = -EIO; + } + +done: + if (therm) { + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x1); + msleep(100); + dd_dev_info(dd, "%s: Re-enable therm polling\n", + __func__); + } + release_hw_mutex(dd); +done_no_mutex: + /* return no error if it is OK to be at current speed */ + if (ret && !return_error) { + dd_dev_err(dd, "Proceeding at current speed PCIe speed\n"); + ret = 0; + } + + dd_dev_info(dd, "%s: done\n", __func__); + return ret; +} diff --git a/drivers/staging/rdma/hfi1/pio.c b/drivers/staging/rdma/hfi1/pio.c new file mode 100644 index 000000000000..9991814a8f05 --- /dev/null +++ b/drivers/staging/rdma/hfi1/pio.c @@ -0,0 +1,1771 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/delay.h> +#include "hfi.h" +#include "qp.h" +#include "trace.h" + +#define SC_CTXT_PACKET_EGRESS_TIMEOUT 350 /* in chip cycles */ + +#define SC(name) SEND_CTXT_##name +/* + * Send Context functions + */ +static void sc_wait_for_packet_egress(struct send_context *sc, int pause); + +/* + * Set the CM reset bit and wait for it to clear. Use the provided + * sendctrl register. This routine has no locking. + */ +void __cm_reset(struct hfi1_devdata *dd, u64 sendctrl) +{ + write_csr(dd, SEND_CTRL, sendctrl | SEND_CTRL_CM_RESET_SMASK); + while (1) { + udelay(1); + sendctrl = read_csr(dd, SEND_CTRL); + if ((sendctrl & SEND_CTRL_CM_RESET_SMASK) == 0) + break; + } +} + +/* defined in header release 48 and higher */ +#ifndef SEND_CTRL_UNSUPPORTED_VL_SHIFT +#define SEND_CTRL_UNSUPPORTED_VL_SHIFT 3 +#define SEND_CTRL_UNSUPPORTED_VL_MASK 0xffull +#define SEND_CTRL_UNSUPPORTED_VL_SMASK (SEND_CTRL_UNSUPPORTED_VL_MASK \ + << SEND_CTRL_UNSUPPORTED_VL_SHIFT) +#endif + +/* global control of PIO send */ +void pio_send_control(struct hfi1_devdata *dd, int op) +{ + u64 reg, mask; + unsigned long flags; + int write = 1; /* write sendctrl back */ + int flush = 0; /* re-read sendctrl to make sure it is flushed */ + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + + reg = read_csr(dd, SEND_CTRL); + switch (op) { + case PSC_GLOBAL_ENABLE: + reg |= SEND_CTRL_SEND_ENABLE_SMASK; + /* Fall through */ + case PSC_DATA_VL_ENABLE: + /* Disallow sending on VLs not enabled */ + mask = (((~0ull)<<num_vls) & SEND_CTRL_UNSUPPORTED_VL_MASK)<< + SEND_CTRL_UNSUPPORTED_VL_SHIFT; + reg = (reg & ~SEND_CTRL_UNSUPPORTED_VL_SMASK) | mask; + break; + case PSC_GLOBAL_DISABLE: + reg &= ~SEND_CTRL_SEND_ENABLE_SMASK; + break; + case PSC_GLOBAL_VLARB_ENABLE: + reg |= SEND_CTRL_VL_ARBITER_ENABLE_SMASK; + break; + case PSC_GLOBAL_VLARB_DISABLE: + reg &= ~SEND_CTRL_VL_ARBITER_ENABLE_SMASK; + break; + case PSC_CM_RESET: + __cm_reset(dd, reg); + write = 0; /* CSR already written (and flushed) */ + break; + case PSC_DATA_VL_DISABLE: + reg |= SEND_CTRL_UNSUPPORTED_VL_SMASK; + flush = 1; + break; + default: + dd_dev_err(dd, "%s: invalid control %d\n", __func__, op); + break; + } + + if (write) { + write_csr(dd, SEND_CTRL, reg); + if (flush) + (void) read_csr(dd, SEND_CTRL); /* flush write */ + } + + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); +} + +/* number of send context memory pools */ +#define NUM_SC_POOLS 2 + +/* Send Context Size (SCS) wildcards */ +#define SCS_POOL_0 -1 +#define SCS_POOL_1 -2 +/* Send Context Count (SCC) wildcards */ +#define SCC_PER_VL -1 +#define SCC_PER_CPU -2 + +#define SCC_PER_KRCVQ -3 +#define SCC_ACK_CREDITS 32 + +#define PIO_WAIT_BATCH_SIZE 5 + +/* default send context sizes */ +static struct sc_config_sizes sc_config_sizes[SC_MAX] = { + [SC_KERNEL] = { .size = SCS_POOL_0, /* even divide, pool 0 */ + .count = SCC_PER_VL },/* one per NUMA */ + [SC_ACK] = { .size = SCC_ACK_CREDITS, + .count = SCC_PER_KRCVQ }, + [SC_USER] = { .size = SCS_POOL_0, /* even divide, pool 0 */ + .count = SCC_PER_CPU }, /* one per CPU */ + +}; + +/* send context memory pool configuration */ +struct mem_pool_config { + int centipercent; /* % of memory, in 100ths of 1% */ + int absolute_blocks; /* absolute block count */ +}; + +/* default memory pool configuration: 100% in pool 0 */ +static struct mem_pool_config sc_mem_pool_config[NUM_SC_POOLS] = { + /* centi%, abs blocks */ + { 10000, -1 }, /* pool 0 */ + { 0, -1 }, /* pool 1 */ +}; + +/* memory pool information, used when calculating final sizes */ +struct mem_pool_info { + int centipercent; /* 100th of 1% of memory to use, -1 if blocks + already set */ + int count; /* count of contexts in the pool */ + int blocks; /* block size of the pool */ + int size; /* context size, in blocks */ +}; + +/* + * Convert a pool wildcard to a valid pool index. The wildcards + * start at -1 and increase negatively. Map them as: + * -1 => 0 + * -2 => 1 + * etc. + * + * Return -1 on non-wildcard input, otherwise convert to a pool number. + */ +static int wildcard_to_pool(int wc) +{ + if (wc >= 0) + return -1; /* non-wildcard */ + return -wc - 1; +} + +static const char *sc_type_names[SC_MAX] = { + "kernel", + "ack", + "user" +}; + +static const char *sc_type_name(int index) +{ + if (index < 0 || index >= SC_MAX) + return "unknown"; + return sc_type_names[index]; +} + +/* + * Read the send context memory pool configuration and send context + * size configuration. Replace any wildcards and come up with final + * counts and sizes for the send context types. + */ +int init_sc_pools_and_sizes(struct hfi1_devdata *dd) +{ + struct mem_pool_info mem_pool_info[NUM_SC_POOLS] = { { 0 } }; + int total_blocks = (dd->chip_pio_mem_size / PIO_BLOCK_SIZE) - 1; + int total_contexts = 0; + int fixed_blocks; + int pool_blocks; + int used_blocks; + int cp_total; /* centipercent total */ + int ab_total; /* absolute block total */ + int extra; + int i; + + /* + * Step 0: + * - copy the centipercents/absolute sizes from the pool config + * - sanity check these values + * - add up centipercents, then later check for full value + * - add up absolute blocks, then later check for over-commit + */ + cp_total = 0; + ab_total = 0; + for (i = 0; i < NUM_SC_POOLS; i++) { + int cp = sc_mem_pool_config[i].centipercent; + int ab = sc_mem_pool_config[i].absolute_blocks; + + /* + * A negative value is "unused" or "invalid". Both *can* + * be valid, but centipercent wins, so check that first + */ + if (cp >= 0) { /* centipercent valid */ + cp_total += cp; + } else if (ab >= 0) { /* absolute blocks valid */ + ab_total += ab; + } else { /* neither valid */ + dd_dev_err( + dd, + "Send context memory pool %d: both the block count and centipercent are invalid\n", + i); + return -EINVAL; + } + + mem_pool_info[i].centipercent = cp; + mem_pool_info[i].blocks = ab; + } + + /* do not use both % and absolute blocks for different pools */ + if (cp_total != 0 && ab_total != 0) { + dd_dev_err( + dd, + "All send context memory pools must be described as either centipercent or blocks, no mixing between pools\n"); + return -EINVAL; + } + + /* if any percentages are present, they must add up to 100% x 100 */ + if (cp_total != 0 && cp_total != 10000) { + dd_dev_err( + dd, + "Send context memory pool centipercent is %d, expecting 10000\n", + cp_total); + return -EINVAL; + } + + /* the absolute pool total cannot be more than the mem total */ + if (ab_total > total_blocks) { + dd_dev_err( + dd, + "Send context memory pool absolute block count %d is larger than the memory size %d\n", + ab_total, total_blocks); + return -EINVAL; + } + + /* + * Step 2: + * - copy from the context size config + * - replace context type wildcard counts with real values + * - add up non-memory pool block sizes + * - add up memory pool user counts + */ + fixed_blocks = 0; + for (i = 0; i < SC_MAX; i++) { + int count = sc_config_sizes[i].count; + int size = sc_config_sizes[i].size; + int pool; + + /* + * Sanity check count: Either a positive value or + * one of the expected wildcards is valid. The positive + * value is checked later when we compare against total + * memory available. + */ + if (i == SC_ACK) { + count = dd->n_krcv_queues; + } else if (i == SC_KERNEL) { + count = num_vls + 1 /* VL15 */; + } else if (count == SCC_PER_CPU) { + count = dd->num_rcv_contexts - dd->n_krcv_queues; + } else if (count < 0) { + dd_dev_err( + dd, + "%s send context invalid count wildcard %d\n", + sc_type_name(i), count); + return -EINVAL; + } + if (total_contexts + count > dd->chip_send_contexts) + count = dd->chip_send_contexts - total_contexts; + + total_contexts += count; + + /* + * Sanity check pool: The conversion will return a pool + * number or -1 if a fixed (non-negative) value. The fixed + * value is checked later when we compare against + * total memory available. + */ + pool = wildcard_to_pool(size); + if (pool == -1) { /* non-wildcard */ + fixed_blocks += size * count; + } else if (pool < NUM_SC_POOLS) { /* valid wildcard */ + mem_pool_info[pool].count += count; + } else { /* invalid wildcard */ + dd_dev_err( + dd, + "%s send context invalid pool wildcard %d\n", + sc_type_name(i), size); + return -EINVAL; + } + + dd->sc_sizes[i].count = count; + dd->sc_sizes[i].size = size; + } + if (fixed_blocks > total_blocks) { + dd_dev_err( + dd, + "Send context fixed block count, %u, larger than total block count %u\n", + fixed_blocks, total_blocks); + return -EINVAL; + } + + /* step 3: calculate the blocks in the pools, and pool context sizes */ + pool_blocks = total_blocks - fixed_blocks; + if (ab_total > pool_blocks) { + dd_dev_err( + dd, + "Send context fixed pool sizes, %u, larger than pool block count %u\n", + ab_total, pool_blocks); + return -EINVAL; + } + /* subtract off the fixed pool blocks */ + pool_blocks -= ab_total; + + for (i = 0; i < NUM_SC_POOLS; i++) { + struct mem_pool_info *pi = &mem_pool_info[i]; + + /* % beats absolute blocks */ + if (pi->centipercent >= 0) + pi->blocks = (pool_blocks * pi->centipercent) / 10000; + + if (pi->blocks == 0 && pi->count != 0) { + dd_dev_err( + dd, + "Send context memory pool %d has %u contexts, but no blocks\n", + i, pi->count); + return -EINVAL; + } + if (pi->count == 0) { + /* warn about wasted blocks */ + if (pi->blocks != 0) + dd_dev_err( + dd, + "Send context memory pool %d has %u blocks, but zero contexts\n", + i, pi->blocks); + pi->size = 0; + } else { + pi->size = pi->blocks / pi->count; + } + } + + /* step 4: fill in the context type sizes from the pool sizes */ + used_blocks = 0; + for (i = 0; i < SC_MAX; i++) { + if (dd->sc_sizes[i].size < 0) { + unsigned pool = wildcard_to_pool(dd->sc_sizes[i].size); + + WARN_ON_ONCE(pool >= NUM_SC_POOLS); + dd->sc_sizes[i].size = mem_pool_info[pool].size; + } + /* make sure we are not larger than what is allowed by the HW */ +#define PIO_MAX_BLOCKS 1024 + if (dd->sc_sizes[i].size > PIO_MAX_BLOCKS) + dd->sc_sizes[i].size = PIO_MAX_BLOCKS; + + /* calculate our total usage */ + used_blocks += dd->sc_sizes[i].size * dd->sc_sizes[i].count; + } + extra = total_blocks - used_blocks; + if (extra != 0) + dd_dev_info(dd, "unused send context blocks: %d\n", extra); + + return total_contexts; +} + +int init_send_contexts(struct hfi1_devdata *dd) +{ + u16 base; + int ret, i, j, context; + + ret = init_credit_return(dd); + if (ret) + return ret; + + dd->hw_to_sw = kmalloc_array(TXE_NUM_CONTEXTS, sizeof(u8), + GFP_KERNEL); + dd->send_contexts = kcalloc(dd->num_send_contexts, + sizeof(struct send_context_info), + GFP_KERNEL); + if (!dd->send_contexts || !dd->hw_to_sw) { + dd_dev_err(dd, "Unable to allocate send context arrays\n"); + kfree(dd->hw_to_sw); + kfree(dd->send_contexts); + free_credit_return(dd); + return -ENOMEM; + } + + /* hardware context map starts with invalid send context indices */ + for (i = 0; i < TXE_NUM_CONTEXTS; i++) + dd->hw_to_sw[i] = INVALID_SCI; + + /* + * All send contexts have their credit sizes. Allocate credits + * for each context one after another from the global space. + */ + context = 0; + base = 1; + for (i = 0; i < SC_MAX; i++) { + struct sc_config_sizes *scs = &dd->sc_sizes[i]; + + for (j = 0; j < scs->count; j++) { + struct send_context_info *sci = + &dd->send_contexts[context]; + sci->type = i; + sci->base = base; + sci->credits = scs->size; + + context++; + base += scs->size; + } + } + + return 0; +} + +/* + * Allocate a software index and hardware context of the given type. + * + * Must be called with dd->sc_lock held. + */ +static int sc_hw_alloc(struct hfi1_devdata *dd, int type, u32 *sw_index, + u32 *hw_context) +{ + struct send_context_info *sci; + u32 index; + u32 context; + + for (index = 0, sci = &dd->send_contexts[0]; + index < dd->num_send_contexts; index++, sci++) { + if (sci->type == type && sci->allocated == 0) { + sci->allocated = 1; + /* use a 1:1 mapping, but make them non-equal */ + context = dd->chip_send_contexts - index - 1; + dd->hw_to_sw[context] = index; + *sw_index = index; + *hw_context = context; + return 0; /* success */ + } + } + dd_dev_err(dd, "Unable to locate a free type %d send context\n", type); + return -ENOSPC; +} + +/* + * Free the send context given by its software index. + * + * Must be called with dd->sc_lock held. + */ +static void sc_hw_free(struct hfi1_devdata *dd, u32 sw_index, u32 hw_context) +{ + struct send_context_info *sci; + + sci = &dd->send_contexts[sw_index]; + if (!sci->allocated) { + dd_dev_err(dd, "%s: sw_index %u not allocated? hw_context %u\n", + __func__, sw_index, hw_context); + } + sci->allocated = 0; + dd->hw_to_sw[hw_context] = INVALID_SCI; +} + +/* return the base context of a context in a group */ +static inline u32 group_context(u32 context, u32 group) +{ + return (context >> group) << group; +} + +/* return the size of a group */ +static inline u32 group_size(u32 group) +{ + return 1 << group; +} + +/* + * Obtain the credit return addresses, kernel virtual and physical, for the + * given sc. + * + * To understand this routine: + * o va and pa are arrays of struct credit_return. One for each physical + * send context, per NUMA. + * o Each send context always looks in its relative location in a struct + * credit_return for its credit return. + * o Each send context in a group must have its return address CSR programmed + * with the same value. Use the address of the first send context in the + * group. + */ +static void cr_group_addresses(struct send_context *sc, dma_addr_t *pa) +{ + u32 gc = group_context(sc->hw_context, sc->group); + u32 index = sc->hw_context & 0x7; + + sc->hw_free = &sc->dd->cr_base[sc->node].va[gc].cr[index]; + *pa = (unsigned long) + &((struct credit_return *)sc->dd->cr_base[sc->node].pa)[gc]; +} + +/* + * Work queue function triggered in error interrupt routine for + * kernel contexts. + */ +static void sc_halted(struct work_struct *work) +{ + struct send_context *sc; + + sc = container_of(work, struct send_context, halt_work); + sc_restart(sc); +} + +/* + * Calculate PIO block threshold for this send context using the given MTU. + * Trigger a return when one MTU plus optional header of credits remain. + * + * Parameter mtu is in bytes. + * Parameter hdrqentsize is in DWORDs. + * + * Return value is what to write into the CSR: trigger return when + * unreturned credits pass this count. + */ +u32 sc_mtu_to_threshold(struct send_context *sc, u32 mtu, u32 hdrqentsize) +{ + u32 release_credits; + u32 threshold; + + /* add in the header size, then divide by the PIO block size */ + mtu += hdrqentsize << 2; + release_credits = DIV_ROUND_UP(mtu, PIO_BLOCK_SIZE); + + /* check against this context's credits */ + if (sc->credits <= release_credits) + threshold = 1; + else + threshold = sc->credits - release_credits; + + return threshold; +} + +/* + * Calculate credit threshold in terms of percent of the allocated credits. + * Trigger when unreturned credits equal or exceed the percentage of the whole. + * + * Return value is what to write into the CSR: trigger return when + * unreturned credits pass this count. + */ +static u32 sc_percent_to_threshold(struct send_context *sc, u32 percent) +{ + return (sc->credits * percent) / 100; +} + +/* + * Set the credit return threshold. + */ +void sc_set_cr_threshold(struct send_context *sc, u32 new_threshold) +{ + unsigned long flags; + u32 old_threshold; + int force_return = 0; + + spin_lock_irqsave(&sc->credit_ctrl_lock, flags); + + old_threshold = (sc->credit_ctrl >> + SC(CREDIT_CTRL_THRESHOLD_SHIFT)) + & SC(CREDIT_CTRL_THRESHOLD_MASK); + + if (new_threshold != old_threshold) { + sc->credit_ctrl = + (sc->credit_ctrl + & ~SC(CREDIT_CTRL_THRESHOLD_SMASK)) + | ((new_threshold + & SC(CREDIT_CTRL_THRESHOLD_MASK)) + << SC(CREDIT_CTRL_THRESHOLD_SHIFT)); + write_kctxt_csr(sc->dd, sc->hw_context, + SC(CREDIT_CTRL), sc->credit_ctrl); + + /* force a credit return on change to avoid a possible stall */ + force_return = 1; + } + + spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags); + + if (force_return) + sc_return_credits(sc); +} + +/* + * set_pio_integrity + * + * Set the CHECK_ENABLE register for the send context 'sc'. + */ +void set_pio_integrity(struct send_context *sc) +{ + struct hfi1_devdata *dd = sc->dd; + u64 reg = 0; + u32 hw_context = sc->hw_context; + int type = sc->type; + + /* + * No integrity checks if HFI1_CAP_NO_INTEGRITY is set, or if + * we're snooping. + */ + if (likely(!HFI1_CAP_IS_KSET(NO_INTEGRITY)) && + dd->hfi1_snoop.mode_flag != HFI1_PORT_SNOOP_MODE) + reg = hfi1_pkt_default_send_ctxt_mask(dd, type); + + write_kctxt_csr(dd, hw_context, SC(CHECK_ENABLE), reg); +} + +/* + * Allocate a NUMA relative send context structure of the given type along + * with a HW context. + */ +struct send_context *sc_alloc(struct hfi1_devdata *dd, int type, + uint hdrqentsize, int numa) +{ + struct send_context_info *sci; + struct send_context *sc; + dma_addr_t pa; + unsigned long flags; + u64 reg; + u32 thresh; + u32 sw_index; + u32 hw_context; + int ret; + u8 opval, opmask; + + /* do not allocate while frozen */ + if (dd->flags & HFI1_FROZEN) + return NULL; + + sc = kzalloc_node(sizeof(struct send_context), GFP_KERNEL, numa); + if (!sc) { + dd_dev_err(dd, "Cannot allocate send context structure\n"); + return NULL; + } + + spin_lock_irqsave(&dd->sc_lock, flags); + ret = sc_hw_alloc(dd, type, &sw_index, &hw_context); + if (ret) { + spin_unlock_irqrestore(&dd->sc_lock, flags); + kfree(sc); + return NULL; + } + + sci = &dd->send_contexts[sw_index]; + sci->sc = sc; + + sc->dd = dd; + sc->node = numa; + sc->type = type; + spin_lock_init(&sc->alloc_lock); + spin_lock_init(&sc->release_lock); + spin_lock_init(&sc->credit_ctrl_lock); + INIT_LIST_HEAD(&sc->piowait); + INIT_WORK(&sc->halt_work, sc_halted); + atomic_set(&sc->buffers_allocated, 0); + init_waitqueue_head(&sc->halt_wait); + + /* grouping is always single context for now */ + sc->group = 0; + + sc->sw_index = sw_index; + sc->hw_context = hw_context; + cr_group_addresses(sc, &pa); + sc->credits = sci->credits; + +/* PIO Send Memory Address details */ +#define PIO_ADDR_CONTEXT_MASK 0xfful +#define PIO_ADDR_CONTEXT_SHIFT 16 + sc->base_addr = dd->piobase + ((hw_context & PIO_ADDR_CONTEXT_MASK) + << PIO_ADDR_CONTEXT_SHIFT); + + /* set base and credits */ + reg = ((sci->credits & SC(CTRL_CTXT_DEPTH_MASK)) + << SC(CTRL_CTXT_DEPTH_SHIFT)) + | ((sci->base & SC(CTRL_CTXT_BASE_MASK)) + << SC(CTRL_CTXT_BASE_SHIFT)); + write_kctxt_csr(dd, hw_context, SC(CTRL), reg); + + set_pio_integrity(sc); + + /* unmask all errors */ + write_kctxt_csr(dd, hw_context, SC(ERR_MASK), (u64)-1); + + /* set the default partition key */ + write_kctxt_csr(dd, hw_context, SC(CHECK_PARTITION_KEY), + (DEFAULT_PKEY & + SC(CHECK_PARTITION_KEY_VALUE_MASK)) + << SC(CHECK_PARTITION_KEY_VALUE_SHIFT)); + + /* per context type checks */ + if (type == SC_USER) { + opval = USER_OPCODE_CHECK_VAL; + opmask = USER_OPCODE_CHECK_MASK; + } else { + opval = OPCODE_CHECK_VAL_DISABLED; + opmask = OPCODE_CHECK_MASK_DISABLED; + } + + /* set the send context check opcode mask and value */ + write_kctxt_csr(dd, hw_context, SC(CHECK_OPCODE), + ((u64)opmask << SC(CHECK_OPCODE_MASK_SHIFT)) | + ((u64)opval << SC(CHECK_OPCODE_VALUE_SHIFT))); + + /* set up credit return */ + reg = pa & SC(CREDIT_RETURN_ADDR_ADDRESS_SMASK); + write_kctxt_csr(dd, hw_context, SC(CREDIT_RETURN_ADDR), reg); + + /* + * Calculate the initial credit return threshold. + * + * For Ack contexts, set a threshold for half the credits. + * For User contexts use the given percentage. This has been + * sanitized on driver start-up. + * For Kernel contexts, use the default MTU plus a header. + */ + if (type == SC_ACK) { + thresh = sc_percent_to_threshold(sc, 50); + } else if (type == SC_USER) { + thresh = sc_percent_to_threshold(sc, + user_credit_return_threshold); + } else { /* kernel */ + thresh = sc_mtu_to_threshold(sc, hfi1_max_mtu, hdrqentsize); + } + reg = thresh << SC(CREDIT_CTRL_THRESHOLD_SHIFT); + /* add in early return */ + if (type == SC_USER && HFI1_CAP_IS_USET(EARLY_CREDIT_RETURN)) + reg |= SC(CREDIT_CTRL_EARLY_RETURN_SMASK); + else if (HFI1_CAP_IS_KSET(EARLY_CREDIT_RETURN)) /* kernel, ack */ + reg |= SC(CREDIT_CTRL_EARLY_RETURN_SMASK); + + /* set up write-through credit_ctrl */ + sc->credit_ctrl = reg; + write_kctxt_csr(dd, hw_context, SC(CREDIT_CTRL), reg); + + /* User send contexts should not allow sending on VL15 */ + if (type == SC_USER) { + reg = 1ULL << 15; + write_kctxt_csr(dd, hw_context, SC(CHECK_VL), reg); + } + + spin_unlock_irqrestore(&dd->sc_lock, flags); + + /* + * Allocate shadow ring to track outstanding PIO buffers _after_ + * unlocking. We don't know the size until the lock is held and + * we can't allocate while the lock is held. No one is using + * the context yet, so allocate it now. + * + * User contexts do not get a shadow ring. + */ + if (type != SC_USER) { + /* + * Size the shadow ring 1 larger than the number of credits + * so head == tail can mean empty. + */ + sc->sr_size = sci->credits + 1; + sc->sr = kzalloc_node(sizeof(union pio_shadow_ring) * + sc->sr_size, GFP_KERNEL, numa); + if (!sc->sr) { + dd_dev_err(dd, + "Cannot allocate send context shadow ring structure\n"); + sc_free(sc); + return NULL; + } + } + + dd_dev_info(dd, + "Send context %u(%u) %s group %u credits %u credit_ctrl 0x%llx threshold %u\n", + sw_index, + hw_context, + sc_type_name(type), + sc->group, + sc->credits, + sc->credit_ctrl, + thresh); + + return sc; +} + +/* free a per-NUMA send context structure */ +void sc_free(struct send_context *sc) +{ + struct hfi1_devdata *dd; + unsigned long flags; + u32 sw_index; + u32 hw_context; + + if (!sc) + return; + + sc->flags |= SCF_IN_FREE; /* ensure no restarts */ + dd = sc->dd; + if (!list_empty(&sc->piowait)) + dd_dev_err(dd, "piowait list not empty!\n"); + sw_index = sc->sw_index; + hw_context = sc->hw_context; + sc_disable(sc); /* make sure the HW is disabled */ + flush_work(&sc->halt_work); + + spin_lock_irqsave(&dd->sc_lock, flags); + dd->send_contexts[sw_index].sc = NULL; + + /* clear/disable all registers set in sc_alloc */ + write_kctxt_csr(dd, hw_context, SC(CTRL), 0); + write_kctxt_csr(dd, hw_context, SC(CHECK_ENABLE), 0); + write_kctxt_csr(dd, hw_context, SC(ERR_MASK), 0); + write_kctxt_csr(dd, hw_context, SC(CHECK_PARTITION_KEY), 0); + write_kctxt_csr(dd, hw_context, SC(CHECK_OPCODE), 0); + write_kctxt_csr(dd, hw_context, SC(CREDIT_RETURN_ADDR), 0); + write_kctxt_csr(dd, hw_context, SC(CREDIT_CTRL), 0); + + /* release the index and context for re-use */ + sc_hw_free(dd, sw_index, hw_context); + spin_unlock_irqrestore(&dd->sc_lock, flags); + + kfree(sc->sr); + kfree(sc); +} + +/* disable the context */ +void sc_disable(struct send_context *sc) +{ + u64 reg; + unsigned long flags; + struct pio_buf *pbuf; + + if (!sc) + return; + + /* do all steps, even if already disabled */ + spin_lock_irqsave(&sc->alloc_lock, flags); + reg = read_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL)); + reg &= ~SC(CTRL_CTXT_ENABLE_SMASK); + sc->flags &= ~SCF_ENABLED; + sc_wait_for_packet_egress(sc, 1); + write_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL), reg); + spin_unlock_irqrestore(&sc->alloc_lock, flags); + + /* + * Flush any waiters. Once the context is disabled, + * credit return interrupts are stopped (although there + * could be one in-process when the context is disabled). + * Wait one microsecond for any lingering interrupts, then + * proceed with the flush. + */ + udelay(1); + spin_lock_irqsave(&sc->release_lock, flags); + if (sc->sr) { /* this context has a shadow ring */ + while (sc->sr_tail != sc->sr_head) { + pbuf = &sc->sr[sc->sr_tail].pbuf; + if (pbuf->cb) + (*pbuf->cb)(pbuf->arg, PRC_SC_DISABLE); + sc->sr_tail++; + if (sc->sr_tail >= sc->sr_size) + sc->sr_tail = 0; + } + } + spin_unlock_irqrestore(&sc->release_lock, flags); +} + +/* return SendEgressCtxtStatus.PacketOccupancy */ +#define packet_occupancy(r) \ + (((r) & SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SMASK)\ + >> SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SHIFT) + +/* is egress halted on the context? */ +#define egress_halted(r) \ + ((r) & SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_HALT_STATUS_SMASK) + +/* wait for packet egress, optionally pause for credit return */ +static void sc_wait_for_packet_egress(struct send_context *sc, int pause) +{ + struct hfi1_devdata *dd = sc->dd; + u64 reg; + u32 loop = 0; + + while (1) { + reg = read_csr(dd, sc->hw_context * 8 + + SEND_EGRESS_CTXT_STATUS); + /* done if egress is stopped */ + if (egress_halted(reg)) + break; + reg = packet_occupancy(reg); + if (reg == 0) + break; + if (loop > 100) { + dd_dev_err(dd, + "%s: context %u(%u) timeout waiting for packets to egress, remaining count %u\n", + __func__, sc->sw_index, + sc->hw_context, (u32)reg); + break; + } + loop++; + udelay(1); + } + + if (pause) + /* Add additional delay to ensure chip returns all credits */ + pause_for_credit_return(dd); +} + +void sc_wait(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < dd->num_send_contexts; i++) { + struct send_context *sc = dd->send_contexts[i].sc; + + if (!sc) + continue; + sc_wait_for_packet_egress(sc, 0); + } +} + +/* + * Restart a context after it has been halted due to error. + * + * If the first step fails - wait for the halt to be asserted, return early. + * Otherwise complain about timeouts but keep going. + * + * It is expected that allocations (enabled flag bit) have been shut off + * already (only applies to kernel contexts). + */ +int sc_restart(struct send_context *sc) +{ + struct hfi1_devdata *dd = sc->dd; + u64 reg; + u32 loop; + int count; + + /* bounce off if not halted, or being free'd */ + if (!(sc->flags & SCF_HALTED) || (sc->flags & SCF_IN_FREE)) + return -EINVAL; + + dd_dev_info(dd, "restarting send context %u(%u)\n", sc->sw_index, + sc->hw_context); + + /* + * Step 1: Wait for the context to actually halt. + * + * The error interrupt is asynchronous to actually setting halt + * on the context. + */ + loop = 0; + while (1) { + reg = read_kctxt_csr(dd, sc->hw_context, SC(STATUS)); + if (reg & SC(STATUS_CTXT_HALTED_SMASK)) + break; + if (loop > 100) { + dd_dev_err(dd, "%s: context %u(%u) not halting, skipping\n", + __func__, sc->sw_index, sc->hw_context); + return -ETIME; + } + loop++; + udelay(1); + } + + /* + * Step 2: Ensure no users are still trying to write to PIO. + * + * For kernel contexts, we have already turned off buffer allocation. + * Now wait for the buffer count to go to zero. + * + * For user contexts, the user handling code has cut off write access + * to the context's PIO pages before calling this routine and will + * restore write access after this routine returns. + */ + if (sc->type != SC_USER) { + /* kernel context */ + loop = 0; + while (1) { + count = atomic_read(&sc->buffers_allocated); + if (count == 0) + break; + if (loop > 100) { + dd_dev_err(dd, + "%s: context %u(%u) timeout waiting for PIO buffers to zero, remaining %d\n", + __func__, sc->sw_index, + sc->hw_context, count); + } + loop++; + udelay(1); + } + } + + /* + * Step 3: Wait for all packets to egress. + * This is done while disabling the send context + * + * Step 4: Disable the context + * + * This is a superset of the halt. After the disable, the + * errors can be cleared. + */ + sc_disable(sc); + + /* + * Step 5: Enable the context + * + * This enable will clear the halted flag and per-send context + * error flags. + */ + return sc_enable(sc); +} + +/* + * PIO freeze processing. To be called after the TXE block is fully frozen. + * Go through all frozen send contexts and disable them. The contexts are + * already stopped by the freeze. + */ +void pio_freeze(struct hfi1_devdata *dd) +{ + struct send_context *sc; + int i; + + for (i = 0; i < dd->num_send_contexts; i++) { + sc = dd->send_contexts[i].sc; + /* + * Don't disable unallocated, unfrozen, or user send contexts. + * User send contexts will be disabled when the process + * calls into the driver to reset its context. + */ + if (!sc || !(sc->flags & SCF_FROZEN) || sc->type == SC_USER) + continue; + + /* only need to disable, the context is already stopped */ + sc_disable(sc); + } +} + +/* + * Unfreeze PIO for kernel send contexts. The precondition for calling this + * is that all PIO send contexts have been disabled and the SPC freeze has + * been cleared. Now perform the last step and re-enable each kernel context. + * User (PSM) processing will occur when PSM calls into the kernel to + * acknowledge the freeze. + */ +void pio_kernel_unfreeze(struct hfi1_devdata *dd) +{ + struct send_context *sc; + int i; + + for (i = 0; i < dd->num_send_contexts; i++) { + sc = dd->send_contexts[i].sc; + if (!sc || !(sc->flags & SCF_FROZEN) || sc->type == SC_USER) + continue; + + sc_enable(sc); /* will clear the sc frozen flag */ + } +} + +/* + * Wait for the SendPioInitCtxt.PioInitInProgress bit to clear. + * Returns: + * -ETIMEDOUT - if we wait too long + * -EIO - if there was an error + */ +static int pio_init_wait_progress(struct hfi1_devdata *dd) +{ + u64 reg; + int max, count = 0; + + /* max is the longest possible HW init time / delay */ + max = (dd->icode == ICODE_FPGA_EMULATION) ? 120 : 5; + while (1) { + reg = read_csr(dd, SEND_PIO_INIT_CTXT); + if (!(reg & SEND_PIO_INIT_CTXT_PIO_INIT_IN_PROGRESS_SMASK)) + break; + if (count >= max) + return -ETIMEDOUT; + udelay(5); + count++; + } + + return reg & SEND_PIO_INIT_CTXT_PIO_INIT_ERR_SMASK ? -EIO : 0; +} + +/* + * Reset all of the send contexts to their power-on state. Used + * only during manual init - no lock against sc_enable needed. + */ +void pio_reset_all(struct hfi1_devdata *dd) +{ + int ret; + + /* make sure the init engine is not busy */ + ret = pio_init_wait_progress(dd); + /* ignore any timeout */ + if (ret == -EIO) { + /* clear the error */ + write_csr(dd, SEND_PIO_ERR_CLEAR, + SEND_PIO_ERR_CLEAR_PIO_INIT_SM_IN_ERR_SMASK); + } + + /* reset init all */ + write_csr(dd, SEND_PIO_INIT_CTXT, + SEND_PIO_INIT_CTXT_PIO_ALL_CTXT_INIT_SMASK); + udelay(2); + ret = pio_init_wait_progress(dd); + if (ret < 0) { + dd_dev_err(dd, + "PIO send context init %s while initializing all PIO blocks\n", + ret == -ETIMEDOUT ? "is stuck" : "had an error"); + } +} + +/* enable the context */ +int sc_enable(struct send_context *sc) +{ + u64 sc_ctrl, reg, pio; + struct hfi1_devdata *dd; + unsigned long flags; + int ret = 0; + + if (!sc) + return -EINVAL; + dd = sc->dd; + + /* + * Obtain the allocator lock to guard against any allocation + * attempts (which should not happen prior to context being + * enabled). On the release/disable side we don't need to + * worry about locking since the releaser will not do anything + * if the context accounting values have not changed. + */ + spin_lock_irqsave(&sc->alloc_lock, flags); + sc_ctrl = read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); + if ((sc_ctrl & SC(CTRL_CTXT_ENABLE_SMASK))) + goto unlock; /* already enabled */ + + /* IMPORTANT: only clear free and fill if transitioning 0 -> 1 */ + + *sc->hw_free = 0; + sc->free = 0; + sc->alloc_free = 0; + sc->fill = 0; + sc->sr_head = 0; + sc->sr_tail = 0; + sc->flags = 0; + atomic_set(&sc->buffers_allocated, 0); + + /* + * Clear all per-context errors. Some of these will be set when + * we are re-enabling after a context halt. Now that the context + * is disabled, the halt will not clear until after the PIO init + * engine runs below. + */ + reg = read_kctxt_csr(dd, sc->hw_context, SC(ERR_STATUS)); + if (reg) + write_kctxt_csr(dd, sc->hw_context, SC(ERR_CLEAR), + reg); + + /* + * The HW PIO initialization engine can handle only one init + * request at a time. Serialize access to each device's engine. + */ + spin_lock(&dd->sc_init_lock); + /* + * Since access to this code block is serialized and + * each access waits for the initialization to complete + * before releasing the lock, the PIO initialization engine + * should not be in use, so we don't have to wait for the + * InProgress bit to go down. + */ + pio = ((sc->hw_context & SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_MASK) << + SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_SHIFT) | + SEND_PIO_INIT_CTXT_PIO_SINGLE_CTXT_INIT_SMASK; + write_csr(dd, SEND_PIO_INIT_CTXT, pio); + /* + * Wait until the engine is done. Give the chip the required time + * so, hopefully, we read the register just once. + */ + udelay(2); + ret = pio_init_wait_progress(dd); + spin_unlock(&dd->sc_init_lock); + if (ret) { + dd_dev_err(dd, + "sctxt%u(%u): Context not enabled due to init failure %d\n", + sc->sw_index, sc->hw_context, ret); + goto unlock; + } + + /* + * All is well. Enable the context. + */ + sc_ctrl |= SC(CTRL_CTXT_ENABLE_SMASK); + write_kctxt_csr(dd, sc->hw_context, SC(CTRL), sc_ctrl); + /* + * Read SendCtxtCtrl to force the write out and prevent a timing + * hazard where a PIO write may reach the context before the enable. + */ + read_kctxt_csr(dd, sc->hw_context, SC(CTRL)); + sc->flags |= SCF_ENABLED; + +unlock: + spin_unlock_irqrestore(&sc->alloc_lock, flags); + + return ret; +} + +/* force a credit return on the context */ +void sc_return_credits(struct send_context *sc) +{ + if (!sc) + return; + + /* a 0->1 transition schedules a credit return */ + write_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE), + SC(CREDIT_FORCE_FORCE_RETURN_SMASK)); + /* + * Ensure that the write is flushed and the credit return is + * scheduled. We care more about the 0 -> 1 transition. + */ + read_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE)); + /* set back to 0 for next time */ + write_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE), 0); +} + +/* allow all in-flight packets to drain on the context */ +void sc_flush(struct send_context *sc) +{ + if (!sc) + return; + + sc_wait_for_packet_egress(sc, 1); +} + +/* drop all packets on the context, no waiting until they are sent */ +void sc_drop(struct send_context *sc) +{ + if (!sc) + return; + + dd_dev_info(sc->dd, "%s: context %u(%u) - not implemented\n", + __func__, sc->sw_index, sc->hw_context); +} + +/* + * Start the software reaction to a context halt or SPC freeze: + * - mark the context as halted or frozen + * - stop buffer allocations + * + * Called from the error interrupt. Other work is deferred until + * out of the interrupt. + */ +void sc_stop(struct send_context *sc, int flag) +{ + unsigned long flags; + + /* mark the context */ + sc->flags |= flag; + + /* stop buffer allocations */ + spin_lock_irqsave(&sc->alloc_lock, flags); + sc->flags &= ~SCF_ENABLED; + spin_unlock_irqrestore(&sc->alloc_lock, flags); + wake_up(&sc->halt_wait); +} + +#define BLOCK_DWORDS (PIO_BLOCK_SIZE/sizeof(u32)) +#define dwords_to_blocks(x) DIV_ROUND_UP(x, BLOCK_DWORDS) + +/* + * The send context buffer "allocator". + * + * @sc: the PIO send context we are allocating from + * @len: length of whole packet - including PBC - in dwords + * @cb: optional callback to call when the buffer is finished sending + * @arg: argument for cb + * + * Return a pointer to a PIO buffer if successful, NULL if not enough room. + */ +struct pio_buf *sc_buffer_alloc(struct send_context *sc, u32 dw_len, + pio_release_cb cb, void *arg) +{ + struct pio_buf *pbuf = NULL; + unsigned long flags; + unsigned long avail; + unsigned long blocks = dwords_to_blocks(dw_len); + unsigned long start_fill; + int trycount = 0; + u32 head, next; + + spin_lock_irqsave(&sc->alloc_lock, flags); + if (!(sc->flags & SCF_ENABLED)) { + spin_unlock_irqrestore(&sc->alloc_lock, flags); + goto done; + } + +retry: + avail = (unsigned long)sc->credits - (sc->fill - sc->alloc_free); + if (blocks > avail) { + /* not enough room */ + if (unlikely(trycount)) { /* already tried to get more room */ + spin_unlock_irqrestore(&sc->alloc_lock, flags); + goto done; + } + /* copy from receiver cache line and recalculate */ + sc->alloc_free = ACCESS_ONCE(sc->free); + avail = + (unsigned long)sc->credits - + (sc->fill - sc->alloc_free); + if (blocks > avail) { + /* still no room, actively update */ + spin_unlock_irqrestore(&sc->alloc_lock, flags); + sc_release_update(sc); + spin_lock_irqsave(&sc->alloc_lock, flags); + sc->alloc_free = ACCESS_ONCE(sc->free); + trycount++; + goto retry; + } + } + + /* there is enough room */ + + atomic_inc(&sc->buffers_allocated); + + /* read this once */ + head = sc->sr_head; + + /* "allocate" the buffer */ + start_fill = sc->fill; + sc->fill += blocks; + + /* + * Fill the parts that the releaser looks at before moving the head. + * The only necessary piece is the sent_at field. The credits + * we have just allocated cannot have been returned yet, so the + * cb and arg will not be looked at for a "while". Put them + * on this side of the memory barrier anyway. + */ + pbuf = &sc->sr[head].pbuf; + pbuf->sent_at = sc->fill; + pbuf->cb = cb; + pbuf->arg = arg; + pbuf->sc = sc; /* could be filled in at sc->sr init time */ + /* make sure this is in memory before updating the head */ + + /* calculate next head index, do not store */ + next = head + 1; + if (next >= sc->sr_size) + next = 0; + /* update the head - must be last! - the releaser can look at fields + in pbuf once we move the head */ + smp_wmb(); + sc->sr_head = next; + spin_unlock_irqrestore(&sc->alloc_lock, flags); + + /* finish filling in the buffer outside the lock */ + pbuf->start = sc->base_addr + ((start_fill % sc->credits) + * PIO_BLOCK_SIZE); + pbuf->size = sc->credits * PIO_BLOCK_SIZE; + pbuf->end = sc->base_addr + pbuf->size; + pbuf->block_count = blocks; + pbuf->qw_written = 0; + pbuf->carry_bytes = 0; + pbuf->carry.val64 = 0; +done: + return pbuf; +} + +/* + * There are at least two entities that can turn on credit return + * interrupts and they can overlap. Avoid problems by implementing + * a count scheme that is enforced by a lock. The lock is needed because + * the count and CSR write must be paired. + */ + +/* + * Start credit return interrupts. This is managed by a count. If already + * on, just increment the count. + */ +void sc_add_credit_return_intr(struct send_context *sc) +{ + unsigned long flags; + + /* lock must surround both the count change and the CSR update */ + spin_lock_irqsave(&sc->credit_ctrl_lock, flags); + if (sc->credit_intr_count == 0) { + sc->credit_ctrl |= SC(CREDIT_CTRL_CREDIT_INTR_SMASK); + write_kctxt_csr(sc->dd, sc->hw_context, + SC(CREDIT_CTRL), sc->credit_ctrl); + } + sc->credit_intr_count++; + spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags); +} + +/* + * Stop credit return interrupts. This is managed by a count. Decrement the + * count, if the last user, then turn the credit interrupts off. + */ +void sc_del_credit_return_intr(struct send_context *sc) +{ + unsigned long flags; + + WARN_ON(sc->credit_intr_count == 0); + + /* lock must surround both the count change and the CSR update */ + spin_lock_irqsave(&sc->credit_ctrl_lock, flags); + sc->credit_intr_count--; + if (sc->credit_intr_count == 0) { + sc->credit_ctrl &= ~SC(CREDIT_CTRL_CREDIT_INTR_SMASK); + write_kctxt_csr(sc->dd, sc->hw_context, + SC(CREDIT_CTRL), sc->credit_ctrl); + } + spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags); +} + +/* + * The caller must be careful when calling this. All needint calls + * must be paired with !needint. + */ +void hfi1_sc_wantpiobuf_intr(struct send_context *sc, u32 needint) +{ + if (needint) + sc_add_credit_return_intr(sc); + else + sc_del_credit_return_intr(sc); + trace_hfi1_wantpiointr(sc, needint, sc->credit_ctrl); + if (needint) { + mmiowb(); + sc_return_credits(sc); + } +} + +/** + * sc_piobufavail - callback when a PIO buffer is available + * @sc: the send context + * + * This is called from the interrupt handler when a PIO buffer is + * available after hfi1_verbs_send() returned an error that no buffers were + * available. Disable the interrupt if there are no more QPs waiting. + */ +static void sc_piobufavail(struct send_context *sc) +{ + struct hfi1_devdata *dd = sc->dd; + struct hfi1_ibdev *dev = &dd->verbs_dev; + struct list_head *list; + struct hfi1_qp *qps[PIO_WAIT_BATCH_SIZE]; + struct hfi1_qp *qp; + unsigned long flags; + unsigned i, n = 0; + + if (dd->send_contexts[sc->sw_index].type != SC_KERNEL) + return; + list = &sc->piowait; + /* + * Note: checking that the piowait list is empty and clearing + * the buffer available interrupt needs to be atomic or we + * could end up with QPs on the wait list with the interrupt + * disabled. + */ + write_seqlock_irqsave(&dev->iowait_lock, flags); + while (!list_empty(list)) { + struct iowait *wait; + + if (n == ARRAY_SIZE(qps)) + goto full; + wait = list_first_entry(list, struct iowait, list); + qp = container_of(wait, struct hfi1_qp, s_iowait); + list_del_init(&qp->s_iowait.list); + /* refcount held until actual wake up */ + qps[n++] = qp; + } + /* + * Counting: only call wantpiobuf_intr() if there were waiters and they + * are now all gone. + */ + if (n) + hfi1_sc_wantpiobuf_intr(sc, 0); +full: + write_sequnlock_irqrestore(&dev->iowait_lock, flags); + + for (i = 0; i < n; i++) + hfi1_qp_wakeup(qps[i], HFI1_S_WAIT_PIO); +} + +/* translate a send credit update to a bit code of reasons */ +static inline int fill_code(u64 hw_free) +{ + int code = 0; + + if (hw_free & CR_STATUS_SMASK) + code |= PRC_STATUS_ERR; + if (hw_free & CR_CREDIT_RETURN_DUE_TO_PBC_SMASK) + code |= PRC_PBC; + if (hw_free & CR_CREDIT_RETURN_DUE_TO_THRESHOLD_SMASK) + code |= PRC_THRESHOLD; + if (hw_free & CR_CREDIT_RETURN_DUE_TO_ERR_SMASK) + code |= PRC_FILL_ERR; + if (hw_free & CR_CREDIT_RETURN_DUE_TO_FORCE_SMASK) + code |= PRC_SC_DISABLE; + return code; +} + +/* use the jiffies compare to get the wrap right */ +#define sent_before(a, b) time_before(a, b) /* a < b */ + +/* + * The send context buffer "releaser". + */ +void sc_release_update(struct send_context *sc) +{ + struct pio_buf *pbuf; + u64 hw_free; + u32 head, tail; + unsigned long old_free; + unsigned long extra; + unsigned long flags; + int code; + + if (!sc) + return; + + spin_lock_irqsave(&sc->release_lock, flags); + /* update free */ + hw_free = le64_to_cpu(*sc->hw_free); /* volatile read */ + old_free = sc->free; + extra = (((hw_free & CR_COUNTER_SMASK) >> CR_COUNTER_SHIFT) + - (old_free & CR_COUNTER_MASK)) + & CR_COUNTER_MASK; + sc->free = old_free + extra; + trace_hfi1_piofree(sc, extra); + + /* call sent buffer callbacks */ + code = -1; /* code not yet set */ + head = ACCESS_ONCE(sc->sr_head); /* snapshot the head */ + tail = sc->sr_tail; + while (head != tail) { + pbuf = &sc->sr[tail].pbuf; + + if (sent_before(sc->free, pbuf->sent_at)) { + /* not sent yet */ + break; + } + if (pbuf->cb) { + if (code < 0) /* fill in code on first user */ + code = fill_code(hw_free); + (*pbuf->cb)(pbuf->arg, code); + } + + tail++; + if (tail >= sc->sr_size) + tail = 0; + } + /* update tail, in case we moved it */ + sc->sr_tail = tail; + spin_unlock_irqrestore(&sc->release_lock, flags); + sc_piobufavail(sc); +} + +/* + * Send context group releaser. Argument is the send context that caused + * the interrupt. Called from the send context interrupt handler. + * + * Call release on all contexts in the group. + * + * This routine takes the sc_lock without an irqsave because it is only + * called from an interrupt handler. Adjust if that changes. + */ +void sc_group_release_update(struct hfi1_devdata *dd, u32 hw_context) +{ + struct send_context *sc; + u32 sw_index; + u32 gc, gc_end; + + spin_lock(&dd->sc_lock); + sw_index = dd->hw_to_sw[hw_context]; + if (unlikely(sw_index >= dd->num_send_contexts)) { + dd_dev_err(dd, "%s: invalid hw (%u) to sw (%u) mapping\n", + __func__, hw_context, sw_index); + goto done; + } + sc = dd->send_contexts[sw_index].sc; + if (unlikely(!sc)) + goto done; + + gc = group_context(hw_context, sc->group); + gc_end = gc + group_size(sc->group); + for (; gc < gc_end; gc++) { + sw_index = dd->hw_to_sw[gc]; + if (unlikely(sw_index >= dd->num_send_contexts)) { + dd_dev_err(dd, + "%s: invalid hw (%u) to sw (%u) mapping\n", + __func__, hw_context, sw_index); + continue; + } + sc_release_update(dd->send_contexts[sw_index].sc); + } +done: + spin_unlock(&dd->sc_lock); +} + +int init_pervl_scs(struct hfi1_devdata *dd) +{ + int i; + u64 mask, all_vl_mask = (u64) 0x80ff; /* VLs 0-7, 15 */ + u32 ctxt; + + dd->vld[15].sc = sc_alloc(dd, SC_KERNEL, + dd->rcd[0]->rcvhdrqentsize, dd->node); + if (!dd->vld[15].sc) + goto nomem; + hfi1_init_ctxt(dd->vld[15].sc); + dd->vld[15].mtu = enum_to_mtu(OPA_MTU_2048); + for (i = 0; i < num_vls; i++) { + /* + * Since this function does not deal with a specific + * receive context but we need the RcvHdrQ entry size, + * use the size from rcd[0]. It is guaranteed to be + * valid at this point and will remain the same for all + * receive contexts. + */ + dd->vld[i].sc = sc_alloc(dd, SC_KERNEL, + dd->rcd[0]->rcvhdrqentsize, dd->node); + if (!dd->vld[i].sc) + goto nomem; + + hfi1_init_ctxt(dd->vld[i].sc); + + /* non VL15 start with the max MTU */ + dd->vld[i].mtu = hfi1_max_mtu; + } + sc_enable(dd->vld[15].sc); + ctxt = dd->vld[15].sc->hw_context; + mask = all_vl_mask & ~(1LL << 15); + write_kctxt_csr(dd, ctxt, SC(CHECK_VL), mask); + dd_dev_info(dd, + "Using send context %u(%u) for VL15\n", + dd->vld[15].sc->sw_index, ctxt); + for (i = 0; i < num_vls; i++) { + sc_enable(dd->vld[i].sc); + ctxt = dd->vld[i].sc->hw_context; + mask = all_vl_mask & ~(1LL << i); + write_kctxt_csr(dd, ctxt, SC(CHECK_VL), mask); + } + return 0; +nomem: + sc_free(dd->vld[15].sc); + for (i = 0; i < num_vls; i++) + sc_free(dd->vld[i].sc); + return -ENOMEM; +} + +int init_credit_return(struct hfi1_devdata *dd) +{ + int ret; + int num_numa; + int i; + + num_numa = num_online_nodes(); + /* enforce the expectation that the numas are compact */ + for (i = 0; i < num_numa; i++) { + if (!node_online(i)) { + dd_dev_err(dd, "NUMA nodes are not compact\n"); + ret = -EINVAL; + goto done; + } + } + + dd->cr_base = kcalloc( + num_numa, + sizeof(struct credit_return_base), + GFP_KERNEL); + if (!dd->cr_base) { + dd_dev_err(dd, "Unable to allocate credit return base\n"); + ret = -ENOMEM; + goto done; + } + for (i = 0; i < num_numa; i++) { + int bytes = TXE_NUM_CONTEXTS * sizeof(struct credit_return); + + set_dev_node(&dd->pcidev->dev, i); + dd->cr_base[i].va = dma_zalloc_coherent( + &dd->pcidev->dev, + bytes, + &dd->cr_base[i].pa, + GFP_KERNEL); + if (dd->cr_base[i].va == NULL) { + set_dev_node(&dd->pcidev->dev, dd->node); + dd_dev_err(dd, + "Unable to allocate credit return DMA range for NUMA %d\n", + i); + ret = -ENOMEM; + goto done; + } + } + set_dev_node(&dd->pcidev->dev, dd->node); + + ret = 0; +done: + return ret; +} + +void free_credit_return(struct hfi1_devdata *dd) +{ + int num_numa; + int i; + + if (!dd->cr_base) + return; + + num_numa = num_online_nodes(); + for (i = 0; i < num_numa; i++) { + if (dd->cr_base[i].va) { + dma_free_coherent(&dd->pcidev->dev, + TXE_NUM_CONTEXTS + * sizeof(struct credit_return), + dd->cr_base[i].va, + dd->cr_base[i].pa); + } + } + kfree(dd->cr_base); + dd->cr_base = NULL; +} diff --git a/drivers/staging/rdma/hfi1/pio.h b/drivers/staging/rdma/hfi1/pio.h new file mode 100644 index 000000000000..0bb885ca3cfb --- /dev/null +++ b/drivers/staging/rdma/hfi1/pio.h @@ -0,0 +1,224 @@ +#ifndef _PIO_H +#define _PIO_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +/* send context types */ +#define SC_KERNEL 0 +#define SC_ACK 1 +#define SC_USER 2 +#define SC_MAX 3 + +/* invalid send context index */ +#define INVALID_SCI 0xff + +/* PIO buffer release callback function */ +typedef void (*pio_release_cb)(void *arg, int code); + +/* PIO release codes - in bits, as there could more than one that apply */ +#define PRC_OK 0 /* no known error */ +#define PRC_STATUS_ERR 0x01 /* credit return due to status error */ +#define PRC_PBC 0x02 /* credit return due to PBC */ +#define PRC_THRESHOLD 0x04 /* credit return due to threshold */ +#define PRC_FILL_ERR 0x08 /* credit return due fill error */ +#define PRC_FORCE 0x10 /* credit return due credit force */ +#define PRC_SC_DISABLE 0x20 /* clean-up after a context disable */ + +/* byte helper */ +union mix { + u64 val64; + u32 val32[2]; + u8 val8[8]; +}; + +/* an allocated PIO buffer */ +struct pio_buf { + struct send_context *sc;/* back pointer to owning send context */ + pio_release_cb cb; /* called when the buffer is released */ + void *arg; /* argument for cb */ + void __iomem *start; /* buffer start address */ + void __iomem *end; /* context end address */ + unsigned long size; /* context size, in bytes */ + unsigned long sent_at; /* buffer is sent when <= free */ + u32 block_count; /* size of buffer, in blocks */ + u32 qw_written; /* QW written so far */ + u32 carry_bytes; /* number of valid bytes in carry */ + union mix carry; /* pending unwritten bytes */ +}; + +/* cache line aligned pio buffer array */ +union pio_shadow_ring { + struct pio_buf pbuf; + u64 unused[16]; /* cache line spacer */ +} ____cacheline_aligned; + +/* per-NUMA send context */ +struct send_context { + /* read-only after init */ + struct hfi1_devdata *dd; /* device */ + void __iomem *base_addr; /* start of PIO memory */ + union pio_shadow_ring *sr; /* shadow ring */ + volatile __le64 *hw_free; /* HW free counter */ + struct work_struct halt_work; /* halted context work queue entry */ + unsigned long flags; /* flags */ + int node; /* context home node */ + int type; /* context type */ + u32 sw_index; /* software index number */ + u32 hw_context; /* hardware context number */ + u32 credits; /* number of blocks in context */ + u32 sr_size; /* size of the shadow ring */ + u32 group; /* credit return group */ + /* allocator fields */ + spinlock_t alloc_lock ____cacheline_aligned_in_smp; + unsigned long fill; /* official alloc count */ + unsigned long alloc_free; /* copy of free (less cache thrash) */ + u32 sr_head; /* shadow ring head */ + /* releaser fields */ + spinlock_t release_lock ____cacheline_aligned_in_smp; + unsigned long free; /* official free count */ + u32 sr_tail; /* shadow ring tail */ + /* list for PIO waiters */ + struct list_head piowait ____cacheline_aligned_in_smp; + spinlock_t credit_ctrl_lock ____cacheline_aligned_in_smp; + u64 credit_ctrl; /* cache for credit control */ + u32 credit_intr_count; /* count of credit intr users */ + atomic_t buffers_allocated; /* count of buffers allocated */ + wait_queue_head_t halt_wait; /* wait until kernel sees interrupt */ +}; + +/* send context flags */ +#define SCF_ENABLED 0x01 +#define SCF_IN_FREE 0x02 +#define SCF_HALTED 0x04 +#define SCF_FROZEN 0x08 + +struct send_context_info { + struct send_context *sc; /* allocated working context */ + u16 allocated; /* has this been allocated? */ + u16 type; /* context type */ + u16 base; /* base in PIO array */ + u16 credits; /* size in PIO array */ +}; + +/* DMA credit return, index is always (context & 0x7) */ +struct credit_return { + volatile __le64 cr[8]; +}; + +/* NUMA indexed credit return array */ +struct credit_return_base { + struct credit_return *va; + dma_addr_t pa; +}; + +/* send context configuration sizes (one per type) */ +struct sc_config_sizes { + short int size; + short int count; +}; + +/* send context functions */ +int init_credit_return(struct hfi1_devdata *dd); +void free_credit_return(struct hfi1_devdata *dd); +int init_sc_pools_and_sizes(struct hfi1_devdata *dd); +int init_send_contexts(struct hfi1_devdata *dd); +int init_credit_return(struct hfi1_devdata *dd); +int init_pervl_scs(struct hfi1_devdata *dd); +struct send_context *sc_alloc(struct hfi1_devdata *dd, int type, + uint hdrqentsize, int numa); +void sc_free(struct send_context *sc); +int sc_enable(struct send_context *sc); +void sc_disable(struct send_context *sc); +int sc_restart(struct send_context *sc); +void sc_return_credits(struct send_context *sc); +void sc_flush(struct send_context *sc); +void sc_drop(struct send_context *sc); +void sc_stop(struct send_context *sc, int bit); +struct pio_buf *sc_buffer_alloc(struct send_context *sc, u32 dw_len, + pio_release_cb cb, void *arg); +void sc_release_update(struct send_context *sc); +void sc_return_credits(struct send_context *sc); +void sc_group_release_update(struct hfi1_devdata *dd, u32 hw_context); +void sc_add_credit_return_intr(struct send_context *sc); +void sc_del_credit_return_intr(struct send_context *sc); +void sc_set_cr_threshold(struct send_context *sc, u32 new_threshold); +u32 sc_mtu_to_threshold(struct send_context *sc, u32 mtu, u32 hdrqentsize); +void hfi1_sc_wantpiobuf_intr(struct send_context *sc, u32 needint); +void sc_wait(struct hfi1_devdata *dd); +void set_pio_integrity(struct send_context *sc); + +/* support functions */ +void pio_reset_all(struct hfi1_devdata *dd); +void pio_freeze(struct hfi1_devdata *dd); +void pio_kernel_unfreeze(struct hfi1_devdata *dd); + +/* global PIO send control operations */ +#define PSC_GLOBAL_ENABLE 0 +#define PSC_GLOBAL_DISABLE 1 +#define PSC_GLOBAL_VLARB_ENABLE 2 +#define PSC_GLOBAL_VLARB_DISABLE 3 +#define PSC_CM_RESET 4 +#define PSC_DATA_VL_ENABLE 5 +#define PSC_DATA_VL_DISABLE 6 + +void __cm_reset(struct hfi1_devdata *dd, u64 sendctrl); +void pio_send_control(struct hfi1_devdata *dd, int op); + + +/* PIO copy routines */ +void pio_copy(struct hfi1_devdata *dd, struct pio_buf *pbuf, u64 pbc, + const void *from, size_t count); +void seg_pio_copy_start(struct pio_buf *pbuf, u64 pbc, + const void *from, size_t nbytes); +void seg_pio_copy_mid(struct pio_buf *pbuf, const void *from, size_t nbytes); +void seg_pio_copy_end(struct pio_buf *pbuf); + +#endif /* _PIO_H */ diff --git a/drivers/staging/rdma/hfi1/pio_copy.c b/drivers/staging/rdma/hfi1/pio_copy.c new file mode 100644 index 000000000000..8972bbc02038 --- /dev/null +++ b/drivers/staging/rdma/hfi1/pio_copy.c @@ -0,0 +1,858 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "hfi.h" + +/* additive distance between non-SOP and SOP space */ +#define SOP_DISTANCE (TXE_PIO_SIZE / 2) +#define PIO_BLOCK_MASK (PIO_BLOCK_SIZE-1) +/* number of QUADWORDs in a block */ +#define PIO_BLOCK_QWS (PIO_BLOCK_SIZE/sizeof(u64)) + +/** + * pio_copy - copy data block to MMIO space + * @pbuf: a number of blocks allocated within a PIO send context + * @pbc: PBC to send + * @from: source, must be 8 byte aligned + * @count: number of DWORD (32-bit) quantities to copy from source + * + * Copy data from source to PIO Send Buffer memory, 8 bytes at a time. + * Must always write full BLOCK_SIZE bytes blocks. The first block must + * be written to the corresponding SOP=1 address. + * + * Known: + * o pbuf->start always starts on a block boundary + * o pbuf can wrap only at a block boundary + */ +void pio_copy(struct hfi1_devdata *dd, struct pio_buf *pbuf, u64 pbc, + const void *from, size_t count) +{ + void __iomem *dest = pbuf->start + SOP_DISTANCE; + void __iomem *send = dest + PIO_BLOCK_SIZE; + void __iomem *dend; /* 8-byte data end */ + + /* write the PBC */ + writeq(pbc, dest); + dest += sizeof(u64); + + /* calculate where the QWORD data ends - in SOP=1 space */ + dend = dest + ((count>>1) * sizeof(u64)); + + if (dend < send) { + /* all QWORD data is within the SOP block, does *not* + reach the end of the SOP block */ + + while (dest < dend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + /* + * No boundary checks are needed here: + * 0. We're not on the SOP block boundary + * 1. The possible DWORD dangle will still be within + * the SOP block + * 2. We cannot wrap except on a block boundary. + */ + } else { + /* QWORD data extends _to_ or beyond the SOP block */ + + /* write 8-byte SOP chunk data */ + while (dest < send) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + /* drop out of the SOP range */ + dest -= SOP_DISTANCE; + dend -= SOP_DISTANCE; + + /* + * If the wrap comes before or matches the data end, + * copy until until the wrap, then wrap. + * + * If the data ends at the end of the SOP above and + * the buffer wraps, then pbuf->end == dend == dest + * and nothing will get written, but we will wrap in + * case there is a dangling DWORD. + */ + if (pbuf->end <= dend) { + while (dest < pbuf->end) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + + dest -= pbuf->size; + dend -= pbuf->size; + } + + /* write 8-byte non-SOP, non-wrap chunk data */ + while (dest < dend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + } + /* at this point we have wrapped if we are going to wrap */ + + /* write dangling u32, if any */ + if (count & 1) { + union mix val; + + val.val64 = 0; + val.val32[0] = *(u32 *)from; + writeq(val.val64, dest); + dest += sizeof(u64); + } + /* fill in rest of block, no need to check pbuf->end + as we only wrap on a block boundary */ + while (((unsigned long)dest & PIO_BLOCK_MASK) != 0) { + writeq(0, dest); + dest += sizeof(u64); + } + + /* finished with this buffer */ + atomic_dec(&pbuf->sc->buffers_allocated); +} + +/* USE_SHIFTS is faster in user-space tests on a Xeon X5570 @ 2.93GHz */ +#define USE_SHIFTS 1 +#ifdef USE_SHIFTS +/* + * Handle carry bytes using shifts and masks. + * + * NOTE: the value the unused portion of carry is expected to always be zero. + */ + +/* + * "zero" shift - bit shift used to zero out upper bytes. Input is + * the count of LSB bytes to preserve. + */ +#define zshift(x) (8 * (8-(x))) + +/* + * "merge" shift - bit shift used to merge with carry bytes. Input is + * the LSB byte count to move beyond. + */ +#define mshift(x) (8 * (x)) + +/* + * Read nbytes bytes from "from" and return them in the LSB bytes + * of pbuf->carry. Other bytes are zeroed. Any previous value + * pbuf->carry is lost. + * + * NOTES: + * o do not read from from if nbytes is zero + * o from may _not_ be u64 aligned + * o nbytes must not span a QW boundary + */ +static inline void read_low_bytes(struct pio_buf *pbuf, const void *from, + unsigned int nbytes) +{ + unsigned long off; + + if (nbytes == 0) { + pbuf->carry.val64 = 0; + } else { + /* align our pointer */ + off = (unsigned long)from & 0x7; + from = (void *)((unsigned long)from & ~0x7l); + pbuf->carry.val64 = ((*(u64 *)from) + << zshift(nbytes + off))/* zero upper bytes */ + >> zshift(nbytes); /* place at bottom */ + } + pbuf->carry_bytes = nbytes; +} + +/* + * Read nbytes bytes from "from" and put them at the next significant bytes + * of pbuf->carry. Unused bytes are zeroed. It is expected that the extra + * read does not overfill carry. + * + * NOTES: + * o from may _not_ be u64 aligned + * o nbytes may span a QW boundary + */ +static inline void read_extra_bytes(struct pio_buf *pbuf, + const void *from, unsigned int nbytes) +{ + unsigned long off = (unsigned long)from & 0x7; + unsigned int room, xbytes; + + /* align our pointer */ + from = (void *)((unsigned long)from & ~0x7l); + + /* check count first - don't read anything if count is zero */ + while (nbytes) { + /* find the number of bytes in this u64 */ + room = 8 - off; /* this u64 has room for this many bytes */ + xbytes = nbytes > room ? room : nbytes; + + /* + * shift down to zero lower bytes, shift up to zero upper + * bytes, shift back down to move into place + */ + pbuf->carry.val64 |= (((*(u64 *)from) + >> mshift(off)) + << zshift(xbytes)) + >> zshift(xbytes+pbuf->carry_bytes); + off = 0; + pbuf->carry_bytes += xbytes; + nbytes -= xbytes; + from += sizeof(u64); + } +} + +/* + * Zero extra bytes from the end of pbuf->carry. + * + * NOTES: + * o zbytes <= old_bytes + */ +static inline void zero_extra_bytes(struct pio_buf *pbuf, unsigned int zbytes) +{ + unsigned int remaining; + + if (zbytes == 0) /* nothing to do */ + return; + + remaining = pbuf->carry_bytes - zbytes; /* remaining bytes */ + + /* NOTE: zshift only guaranteed to work if remaining != 0 */ + if (remaining) + pbuf->carry.val64 = (pbuf->carry.val64 << zshift(remaining)) + >> zshift(remaining); + else + pbuf->carry.val64 = 0; + pbuf->carry_bytes = remaining; +} + +/* + * Write a quad word using parts of pbuf->carry and the next 8 bytes of src. + * Put the unused part of the next 8 bytes of src into the LSB bytes of + * pbuf->carry with the upper bytes zeroed.. + * + * NOTES: + * o result must keep unused bytes zeroed + * o src must be u64 aligned + */ +static inline void merge_write8( + struct pio_buf *pbuf, + void __iomem *dest, + const void *src) +{ + u64 new, temp; + + new = *(u64 *)src; + temp = pbuf->carry.val64 | (new << mshift(pbuf->carry_bytes)); + writeq(temp, dest); + pbuf->carry.val64 = new >> zshift(pbuf->carry_bytes); +} + +/* + * Write a quad word using all bytes of carry. + */ +static inline void carry8_write8(union mix carry, void __iomem *dest) +{ + writeq(carry.val64, dest); +} + +/* + * Write a quad word using all the valid bytes of carry. If carry + * has zero valid bytes, nothing is written. + * Returns 0 on nothing written, non-zero on quad word written. + */ +static inline int carry_write8(struct pio_buf *pbuf, void __iomem *dest) +{ + if (pbuf->carry_bytes) { + /* unused bytes are always kept zeroed, so just write */ + writeq(pbuf->carry.val64, dest); + return 1; + } + + return 0; +} + +#else /* USE_SHIFTS */ +/* + * Handle carry bytes using byte copies. + * + * NOTE: the value the unused portion of carry is left uninitialized. + */ + +/* + * Jump copy - no-loop copy for < 8 bytes. + */ +static inline void jcopy(u8 *dest, const u8 *src, u32 n) +{ + switch (n) { + case 7: + *dest++ = *src++; + case 6: + *dest++ = *src++; + case 5: + *dest++ = *src++; + case 4: + *dest++ = *src++; + case 3: + *dest++ = *src++; + case 2: + *dest++ = *src++; + case 1: + *dest++ = *src++; + } +} + +/* + * Read nbytes from "from" and and place them in the low bytes + * of pbuf->carry. Other bytes are left as-is. Any previous + * value in pbuf->carry is lost. + * + * NOTES: + * o do not read from from if nbytes is zero + * o from may _not_ be u64 aligned. + */ +static inline void read_low_bytes(struct pio_buf *pbuf, const void *from, + unsigned int nbytes) +{ + jcopy(&pbuf->carry.val8[0], from, nbytes); + pbuf->carry_bytes = nbytes; +} + +/* + * Read nbytes bytes from "from" and put them at the end of pbuf->carry. + * It is expected that the extra read does not overfill carry. + * + * NOTES: + * o from may _not_ be u64 aligned + * o nbytes may span a QW boundary + */ +static inline void read_extra_bytes(struct pio_buf *pbuf, + const void *from, unsigned int nbytes) +{ + jcopy(&pbuf->carry.val8[pbuf->carry_bytes], from, nbytes); + pbuf->carry_bytes += nbytes; +} + +/* + * Zero extra bytes from the end of pbuf->carry. + * + * We do not care about the value of unused bytes in carry, so just + * reduce the byte count. + * + * NOTES: + * o zbytes <= old_bytes + */ +static inline void zero_extra_bytes(struct pio_buf *pbuf, unsigned int zbytes) +{ + pbuf->carry_bytes -= zbytes; +} + +/* + * Write a quad word using parts of pbuf->carry and the next 8 bytes of src. + * Put the unused part of the next 8 bytes of src into the low bytes of + * pbuf->carry. + */ +static inline void merge_write8( + struct pio_buf *pbuf, + void *dest, + const void *src) +{ + u32 remainder = 8 - pbuf->carry_bytes; + + jcopy(&pbuf->carry.val8[pbuf->carry_bytes], src, remainder); + writeq(pbuf->carry.val64, dest); + jcopy(&pbuf->carry.val8[0], src+remainder, pbuf->carry_bytes); +} + +/* + * Write a quad word using all bytes of carry. + */ +static inline void carry8_write8(union mix carry, void *dest) +{ + writeq(carry.val64, dest); +} + +/* + * Write a quad word using all the valid bytes of carry. If carry + * has zero valid bytes, nothing is written. + * Returns 0 on nothing written, non-zero on quad word written. + */ +static inline int carry_write8(struct pio_buf *pbuf, void *dest) +{ + if (pbuf->carry_bytes) { + u64 zero = 0; + + jcopy(&pbuf->carry.val8[pbuf->carry_bytes], (u8 *)&zero, + 8 - pbuf->carry_bytes); + writeq(pbuf->carry.val64, dest); + return 1; + } + + return 0; +} +#endif /* USE_SHIFTS */ + +/* + * Segmented PIO Copy - start + * + * Start a PIO copy. + * + * @pbuf: destination buffer + * @pbc: the PBC for the PIO buffer + * @from: data source, QWORD aligned + * @nbytes: bytes to copy + */ +void seg_pio_copy_start(struct pio_buf *pbuf, u64 pbc, + const void *from, size_t nbytes) +{ + void __iomem *dest = pbuf->start + SOP_DISTANCE; + void __iomem *send = dest + PIO_BLOCK_SIZE; + void __iomem *dend; /* 8-byte data end */ + + writeq(pbc, dest); + dest += sizeof(u64); + + /* calculate where the QWORD data ends - in SOP=1 space */ + dend = dest + ((nbytes>>3) * sizeof(u64)); + + if (dend < send) { + /* all QWORD data is within the SOP block, does *not* + reach the end of the SOP block */ + + while (dest < dend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + /* + * No boundary checks are needed here: + * 0. We're not on the SOP block boundary + * 1. The possible DWORD dangle will still be within + * the SOP block + * 2. We cannot wrap except on a block boundary. + */ + } else { + /* QWORD data extends _to_ or beyond the SOP block */ + + /* write 8-byte SOP chunk data */ + while (dest < send) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + /* drop out of the SOP range */ + dest -= SOP_DISTANCE; + dend -= SOP_DISTANCE; + + /* + * If the wrap comes before or matches the data end, + * copy until until the wrap, then wrap. + * + * If the data ends at the end of the SOP above and + * the buffer wraps, then pbuf->end == dend == dest + * and nothing will get written, but we will wrap in + * case there is a dangling DWORD. + */ + if (pbuf->end <= dend) { + while (dest < pbuf->end) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + + dest -= pbuf->size; + dend -= pbuf->size; + } + + /* write 8-byte non-SOP, non-wrap chunk data */ + while (dest < dend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + } + /* at this point we have wrapped if we are going to wrap */ + + /* ...but it doesn't matter as we're done writing */ + + /* save dangling bytes, if any */ + read_low_bytes(pbuf, from, nbytes & 0x7); + + pbuf->qw_written = 1 /*PBC*/ + (nbytes >> 3); +} + +/* + * Mid copy helper, "mixed case" - source is 64-bit aligned but carry + * bytes are non-zero. + * + * Whole u64s must be written to the chip, so bytes must be manually merged. + * + * @pbuf: destination buffer + * @from: data source, is QWORD aligned. + * @nbytes: bytes to copy + * + * Must handle nbytes < 8. + */ +static void mid_copy_mix(struct pio_buf *pbuf, const void *from, size_t nbytes) +{ + void __iomem *dest = pbuf->start + (pbuf->qw_written * sizeof(u64)); + void __iomem *dend; /* 8-byte data end */ + unsigned long qw_to_write = (pbuf->carry_bytes + nbytes) >> 3; + unsigned long bytes_left = (pbuf->carry_bytes + nbytes) & 0x7; + + /* calculate 8-byte data end */ + dend = dest + (qw_to_write * sizeof(u64)); + + if (pbuf->qw_written < PIO_BLOCK_QWS) { + /* + * Still within SOP block. We don't need to check for + * wrap because we are still in the first block and + * can only wrap on block boundaries. + */ + void __iomem *send; /* SOP end */ + void __iomem *xend; + + /* calculate the end of data or end of block, whichever + comes first */ + send = pbuf->start + PIO_BLOCK_SIZE; + xend = send < dend ? send : dend; + + /* shift up to SOP=1 space */ + dest += SOP_DISTANCE; + xend += SOP_DISTANCE; + + /* write 8-byte chunk data */ + while (dest < xend) { + merge_write8(pbuf, dest, from); + from += sizeof(u64); + dest += sizeof(u64); + } + + /* shift down to SOP=0 space */ + dest -= SOP_DISTANCE; + } + /* + * At this point dest could be (either, both, or neither): + * - at dend + * - at the wrap + */ + + /* + * If the wrap comes before or matches the data end, + * copy until until the wrap, then wrap. + * + * If dest is at the wrap, we will fall into the if, + * not do the loop, when wrap. + * + * If the data ends at the end of the SOP above and + * the buffer wraps, then pbuf->end == dend == dest + * and nothing will get written. + */ + if (pbuf->end <= dend) { + while (dest < pbuf->end) { + merge_write8(pbuf, dest, from); + from += sizeof(u64); + dest += sizeof(u64); + } + + dest -= pbuf->size; + dend -= pbuf->size; + } + + /* write 8-byte non-SOP, non-wrap chunk data */ + while (dest < dend) { + merge_write8(pbuf, dest, from); + from += sizeof(u64); + dest += sizeof(u64); + } + + /* adjust carry */ + if (pbuf->carry_bytes < bytes_left) { + /* need to read more */ + read_extra_bytes(pbuf, from, bytes_left - pbuf->carry_bytes); + } else { + /* remove invalid bytes */ + zero_extra_bytes(pbuf, pbuf->carry_bytes - bytes_left); + } + + pbuf->qw_written += qw_to_write; +} + +/* + * Mid copy helper, "straight case" - source pointer is 64-bit aligned + * with no carry bytes. + * + * @pbuf: destination buffer + * @from: data source, is QWORD aligned + * @nbytes: bytes to copy + * + * Must handle nbytes < 8. + */ +static void mid_copy_straight(struct pio_buf *pbuf, + const void *from, size_t nbytes) +{ + void __iomem *dest = pbuf->start + (pbuf->qw_written * sizeof(u64)); + void __iomem *dend; /* 8-byte data end */ + + /* calculate 8-byte data end */ + dend = dest + ((nbytes>>3) * sizeof(u64)); + + if (pbuf->qw_written < PIO_BLOCK_QWS) { + /* + * Still within SOP block. We don't need to check for + * wrap because we are still in the first block and + * can only wrap on block boundaries. + */ + void __iomem *send; /* SOP end */ + void __iomem *xend; + + /* calculate the end of data or end of block, whichever + comes first */ + send = pbuf->start + PIO_BLOCK_SIZE; + xend = send < dend ? send : dend; + + /* shift up to SOP=1 space */ + dest += SOP_DISTANCE; + xend += SOP_DISTANCE; + + /* write 8-byte chunk data */ + while (dest < xend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + + /* shift down to SOP=0 space */ + dest -= SOP_DISTANCE; + } + /* + * At this point dest could be (either, both, or neither): + * - at dend + * - at the wrap + */ + + /* + * If the wrap comes before or matches the data end, + * copy until until the wrap, then wrap. + * + * If dest is at the wrap, we will fall into the if, + * not do the loop, when wrap. + * + * If the data ends at the end of the SOP above and + * the buffer wraps, then pbuf->end == dend == dest + * and nothing will get written. + */ + if (pbuf->end <= dend) { + while (dest < pbuf->end) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + + dest -= pbuf->size; + dend -= pbuf->size; + } + + /* write 8-byte non-SOP, non-wrap chunk data */ + while (dest < dend) { + writeq(*(u64 *)from, dest); + from += sizeof(u64); + dest += sizeof(u64); + } + + /* we know carry_bytes was zero on entry to this routine */ + read_low_bytes(pbuf, from, nbytes & 0x7); + + pbuf->qw_written += nbytes>>3; +} + +/* + * Segmented PIO Copy - middle + * + * Must handle any aligned tail and any aligned source with any byte count. + * + * @pbuf: a number of blocks allocated within a PIO send context + * @from: data source + * @nbytes: number of bytes to copy + */ +void seg_pio_copy_mid(struct pio_buf *pbuf, const void *from, size_t nbytes) +{ + unsigned long from_align = (unsigned long)from & 0x7; + + if (pbuf->carry_bytes + nbytes < 8) { + /* not enough bytes to fill a QW */ + read_extra_bytes(pbuf, from, nbytes); + return; + } + + if (from_align) { + /* misaligned source pointer - align it */ + unsigned long to_align; + + /* bytes to read to align "from" */ + to_align = 8 - from_align; + + /* + * In the advance-to-alignment logic below, we do not need + * to check if we are using more than nbytes. This is because + * if we are here, we already know that carry+nbytes will + * fill at least one QW. + */ + if (pbuf->carry_bytes + to_align < 8) { + /* not enough align bytes to fill a QW */ + read_extra_bytes(pbuf, from, to_align); + from += to_align; + nbytes -= to_align; + } else { + /* bytes to fill carry */ + unsigned long to_fill = 8 - pbuf->carry_bytes; + /* bytes left over to be read */ + unsigned long extra = to_align - to_fill; + void __iomem *dest; + + /* fill carry... */ + read_extra_bytes(pbuf, from, to_fill); + from += to_fill; + nbytes -= to_fill; + + /* ...now write carry */ + dest = pbuf->start + (pbuf->qw_written * sizeof(u64)); + + /* + * The two checks immediately below cannot both be + * true, hence the else. If we have wrapped, we + * cannot still be within the first block. + * Conversely, if we are still in the first block, we + * cannot have wrapped. We do the wrap check first + * as that is more likely. + */ + /* adjust if we've wrapped */ + if (dest >= pbuf->end) + dest -= pbuf->size; + /* jump to SOP range if within the first block */ + else if (pbuf->qw_written < PIO_BLOCK_QWS) + dest += SOP_DISTANCE; + + carry8_write8(pbuf->carry, dest); + pbuf->qw_written++; + + /* read any extra bytes to do final alignment */ + /* this will overwrite anything in pbuf->carry */ + read_low_bytes(pbuf, from, extra); + from += extra; + nbytes -= extra; + } + + /* at this point, from is QW aligned */ + } + + if (pbuf->carry_bytes) + mid_copy_mix(pbuf, from, nbytes); + else + mid_copy_straight(pbuf, from, nbytes); +} + +/* + * Segmented PIO Copy - end + * + * Write any remainder (in pbuf->carry) and finish writing the whole block. + * + * @pbuf: a number of blocks allocated within a PIO send context + */ +void seg_pio_copy_end(struct pio_buf *pbuf) +{ + void __iomem *dest = pbuf->start + (pbuf->qw_written * sizeof(u64)); + + /* + * The two checks immediately below cannot both be true, hence the + * else. If we have wrapped, we cannot still be within the first + * block. Conversely, if we are still in the first block, we + * cannot have wrapped. We do the wrap check first as that is + * more likely. + */ + /* adjust if we have wrapped */ + if (dest >= pbuf->end) + dest -= pbuf->size; + /* jump to the SOP range if within the first block */ + else if (pbuf->qw_written < PIO_BLOCK_QWS) + dest += SOP_DISTANCE; + + /* write final bytes, if any */ + if (carry_write8(pbuf, dest)) { + dest += sizeof(u64); + /* + * NOTE: We do not need to recalculate whether dest needs + * SOP_DISTANCE or not. + * + * If we are in the first block and the dangle write + * keeps us in the same block, dest will need + * to retain SOP_DISTANCE in the loop below. + * + * If we are in the first block and the dangle write pushes + * us to the next block, then loop below will not run + * and dest is not used. Hence we do not need to update + * it. + * + * If we are past the first block, then SOP_DISTANCE + * was never added, so there is nothing to do. + */ + } + + /* fill in rest of block */ + while (((unsigned long)dest & PIO_BLOCK_MASK) != 0) { + writeq(0, dest); + dest += sizeof(u64); + } + + /* finished with this buffer */ + atomic_dec(&pbuf->sc->buffers_allocated); +} diff --git a/drivers/staging/rdma/hfi1/platform_config.h b/drivers/staging/rdma/hfi1/platform_config.h new file mode 100644 index 000000000000..8a94a8342052 --- /dev/null +++ b/drivers/staging/rdma/hfi1/platform_config.h @@ -0,0 +1,286 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef __PLATFORM_CONFIG_H +#define __PLATFORM_CONFIG_H + +#define METADATA_TABLE_FIELD_START_SHIFT 0 +#define METADATA_TABLE_FIELD_START_LEN_BITS 15 +#define METADATA_TABLE_FIELD_LEN_SHIFT 16 +#define METADATA_TABLE_FIELD_LEN_LEN_BITS 16 + +/* Header structure */ +#define PLATFORM_CONFIG_HEADER_RECORD_IDX_SHIFT 0 +#define PLATFORM_CONFIG_HEADER_RECORD_IDX_LEN_BITS 6 +#define PLATFORM_CONFIG_HEADER_TABLE_LENGTH_SHIFT 16 +#define PLATFORM_CONFIG_HEADER_TABLE_LENGTH_LEN_BITS 12 +#define PLATFORM_CONFIG_HEADER_TABLE_TYPE_SHIFT 28 +#define PLATFORM_CONFIG_HEADER_TABLE_TYPE_LEN_BITS 4 + +enum platform_config_table_type_encoding { + PLATFORM_CONFIG_TABLE_RESERVED, + PLATFORM_CONFIG_SYSTEM_TABLE, + PLATFORM_CONFIG_PORT_TABLE, + PLATFORM_CONFIG_RX_PRESET_TABLE, + PLATFORM_CONFIG_TX_PRESET_TABLE, + PLATFORM_CONFIG_QSFP_ATTEN_TABLE, + PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE, + PLATFORM_CONFIG_TABLE_MAX +}; + +enum platform_config_system_table_fields { + SYSTEM_TABLE_RESERVED, + SYSTEM_TABLE_NODE_STRING, + SYSTEM_TABLE_SYSTEM_IMAGE_GUID, + SYSTEM_TABLE_NODE_GUID, + SYSTEM_TABLE_REVISION, + SYSTEM_TABLE_VENDOR_OUI, + SYSTEM_TABLE_META_VERSION, + SYSTEM_TABLE_DEVICE_ID, + SYSTEM_TABLE_PARTITION_ENFORCEMENT_CAP, + SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, + SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_12G, + SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G, + SYSTEM_TABLE_VARIABLE_TABLE_ENTRIES_PER_PORT, + SYSTEM_TABLE_MAX +}; + +enum platform_config_port_table_fields { + PORT_TABLE_RESERVED, + PORT_TABLE_PORT_TYPE, + PORT_TABLE_ATTENUATION_12G, + PORT_TABLE_ATTENUATION_25G, + PORT_TABLE_LINK_SPEED_SUPPORTED, + PORT_TABLE_LINK_WIDTH_SUPPORTED, + PORT_TABLE_VL_CAP, + PORT_TABLE_MTU_CAP, + PORT_TABLE_TX_LANE_ENABLE_MASK, + PORT_TABLE_LOCAL_MAX_TIMEOUT, + PORT_TABLE_AUTO_LANE_SHEDDING_ENABLED, + PORT_TABLE_EXTERNAL_LOOPBACK_ALLOWED, + PORT_TABLE_TX_PRESET_IDX_PASSIVE_CU, + PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ, + PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ, + PORT_TABLE_RX_PRESET_IDX, + PORT_TABLE_CABLE_REACH_CLASS, + PORT_TABLE_MAX +}; + +enum platform_config_rx_preset_table_fields { + RX_PRESET_TABLE_RESERVED, + RX_PRESET_TABLE_QSFP_RX_CDR_APPLY, + RX_PRESET_TABLE_QSFP_RX_EQ_APPLY, + RX_PRESET_TABLE_QSFP_RX_AMP_APPLY, + RX_PRESET_TABLE_QSFP_RX_CDR, + RX_PRESET_TABLE_QSFP_RX_EQ, + RX_PRESET_TABLE_QSFP_RX_AMP, + RX_PRESET_TABLE_MAX +}; + +enum platform_config_tx_preset_table_fields { + TX_PRESET_TABLE_RESERVED, + TX_PRESET_TABLE_PRECUR, + TX_PRESET_TABLE_ATTN, + TX_PRESET_TABLE_POSTCUR, + TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, + TX_PRESET_TABLE_QSFP_TX_EQ_APPLY, + TX_PRESET_TABLE_QSFP_TX_CDR, + TX_PRESET_TABLE_QSFP_TX_EQ, + TX_PRESET_TABLE_MAX +}; + +enum platform_config_qsfp_attn_table_fields { + QSFP_ATTEN_TABLE_RESERVED, + QSFP_ATTEN_TABLE_TX_PRESET_IDX, + QSFP_ATTEN_TABLE_RX_PRESET_IDX, + QSFP_ATTEN_TABLE_MAX +}; + +enum platform_config_variable_settings_table_fields { + VARIABLE_SETTINGS_TABLE_RESERVED, + VARIABLE_SETTINGS_TABLE_TX_PRESET_IDX, + VARIABLE_SETTINGS_TABLE_RX_PRESET_IDX, + VARIABLE_SETTINGS_TABLE_MAX +}; + +struct platform_config_data { + u32 *table; + u32 *table_metadata; + u32 num_table; +}; + +/* + * This struct acts as a quick reference into the platform_data binary image + * and is populated by parse_platform_config(...) depending on the specific + * META_VERSION + */ +struct platform_config_cache { + u8 cache_valid; + struct platform_config_data config_tables[PLATFORM_CONFIG_TABLE_MAX]; +}; + +static const u32 platform_config_table_limits[PLATFORM_CONFIG_TABLE_MAX] = { + 0, + SYSTEM_TABLE_MAX, + PORT_TABLE_MAX, + RX_PRESET_TABLE_MAX, + TX_PRESET_TABLE_MAX, + QSFP_ATTEN_TABLE_MAX, + VARIABLE_SETTINGS_TABLE_MAX +}; + +/* This section defines default values and encodings for the + * fields defined for each table above + */ + +/*===================================================== + * System table encodings + *====================================================*/ +#define PLATFORM_CONFIG_MAGIC_NUM 0x3d4f5041 +#define PLATFORM_CONFIG_MAGIC_NUMBER_LEN 4 + +/* + * These power classes are the same as defined in SFF 8636 spec rev 2.4 + * describing byte 129 in table 6-16, except enumerated in a different order + */ +enum platform_config_qsfp_power_class_encoding { + QSFP_POWER_CLASS_1 = 1, + QSFP_POWER_CLASS_2, + QSFP_POWER_CLASS_3, + QSFP_POWER_CLASS_4, + QSFP_POWER_CLASS_5, + QSFP_POWER_CLASS_6, + QSFP_POWER_CLASS_7 +}; + + +/*===================================================== + * Port table encodings + *==================================================== */ +enum platform_config_port_type_encoding { + PORT_TYPE_RESERVED, + PORT_TYPE_DISCONNECTED, + PORT_TYPE_FIXED, + PORT_TYPE_VARIABLE, + PORT_TYPE_QSFP, + PORT_TYPE_MAX +}; + +enum platform_config_link_speed_supported_encoding { + LINK_SPEED_SUPP_12G = 1, + LINK_SPEED_SUPP_25G, + LINK_SPEED_SUPP_12G_25G, + LINK_SPEED_SUPP_MAX +}; + +/* + * This is a subset (not strict) of the link downgrades + * supported. The link downgrades supported are expected + * to be supplied to the driver by another entity such as + * the fabric manager + */ +enum platform_config_link_width_supported_encoding { + LINK_WIDTH_SUPP_1X = 1, + LINK_WIDTH_SUPP_2X, + LINK_WIDTH_SUPP_2X_1X, + LINK_WIDTH_SUPP_3X, + LINK_WIDTH_SUPP_3X_1X, + LINK_WIDTH_SUPP_3X_2X, + LINK_WIDTH_SUPP_3X_2X_1X, + LINK_WIDTH_SUPP_4X, + LINK_WIDTH_SUPP_4X_1X, + LINK_WIDTH_SUPP_4X_2X, + LINK_WIDTH_SUPP_4X_2X_1X, + LINK_WIDTH_SUPP_4X_3X, + LINK_WIDTH_SUPP_4X_3X_1X, + LINK_WIDTH_SUPP_4X_3X_2X, + LINK_WIDTH_SUPP_4X_3X_2X_1X, + LINK_WIDTH_SUPP_MAX +}; + +enum platform_config_virtual_lane_capability_encoding { + VL_CAP_VL0 = 1, + VL_CAP_VL0_1, + VL_CAP_VL0_2, + VL_CAP_VL0_3, + VL_CAP_VL0_4, + VL_CAP_VL0_5, + VL_CAP_VL0_6, + VL_CAP_VL0_7, + VL_CAP_VL0_8, + VL_CAP_VL0_9, + VL_CAP_VL0_10, + VL_CAP_VL0_11, + VL_CAP_VL0_12, + VL_CAP_VL0_13, + VL_CAP_VL0_14, + VL_CAP_MAX +}; + +/* Max MTU */ +enum platform_config_mtu_capability_encoding { + MTU_CAP_256 = 1, + MTU_CAP_512 = 2, + MTU_CAP_1024 = 3, + MTU_CAP_2048 = 4, + MTU_CAP_4096 = 5, + MTU_CAP_8192 = 6, + MTU_CAP_10240 = 7 +}; + +enum platform_config_local_max_timeout_encoding { + LOCAL_MAX_TIMEOUT_10_MS = 1, + LOCAL_MAX_TIMEOUT_100_MS, + LOCAL_MAX_TIMEOUT_1_S, + LOCAL_MAX_TIMEOUT_10_S, + LOCAL_MAX_TIMEOUT_100_S, + LOCAL_MAX_TIMEOUT_1000_S +}; + +#endif /*__PLATFORM_CONFIG_H*/ diff --git a/drivers/staging/rdma/hfi1/qp.c b/drivers/staging/rdma/hfi1/qp.c new file mode 100644 index 000000000000..df1fa56eaf85 --- /dev/null +++ b/drivers/staging/rdma/hfi1/qp.c @@ -0,0 +1,1687 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/err.h> +#include <linux/vmalloc.h> +#include <linux/hash.h> +#include <linux/module.h> +#include <linux/random.h> +#include <linux/seq_file.h> + +#include "hfi.h" +#include "qp.h" +#include "trace.h" +#include "sdma.h" + +#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE) +#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1) + +static unsigned int hfi1_qp_table_size = 256; +module_param_named(qp_table_size, hfi1_qp_table_size, uint, S_IRUGO); +MODULE_PARM_DESC(qp_table_size, "QP table size"); + +static void flush_tx_list(struct hfi1_qp *qp); +static int iowait_sleep( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *stx, + unsigned seq); +static void iowait_wakeup(struct iowait *wait, int reason); + +static inline unsigned mk_qpn(struct hfi1_qpn_table *qpt, + struct qpn_map *map, unsigned off) +{ + return (map - qpt->map) * BITS_PER_PAGE + off; +} + +/* + * Convert the AETH credit code into the number of credits. + */ +static const u16 credit_table[31] = { + 0, /* 0 */ + 1, /* 1 */ + 2, /* 2 */ + 3, /* 3 */ + 4, /* 4 */ + 6, /* 5 */ + 8, /* 6 */ + 12, /* 7 */ + 16, /* 8 */ + 24, /* 9 */ + 32, /* A */ + 48, /* B */ + 64, /* C */ + 96, /* D */ + 128, /* E */ + 192, /* F */ + 256, /* 10 */ + 384, /* 11 */ + 512, /* 12 */ + 768, /* 13 */ + 1024, /* 14 */ + 1536, /* 15 */ + 2048, /* 16 */ + 3072, /* 17 */ + 4096, /* 18 */ + 6144, /* 19 */ + 8192, /* 1A */ + 12288, /* 1B */ + 16384, /* 1C */ + 24576, /* 1D */ + 32768 /* 1E */ +}; + +static void get_map_page(struct hfi1_qpn_table *qpt, struct qpn_map *map) +{ + unsigned long page = get_zeroed_page(GFP_KERNEL); + + /* + * Free the page if someone raced with us installing it. + */ + + spin_lock(&qpt->lock); + if (map->page) + free_page(page); + else + map->page = (void *)page; + spin_unlock(&qpt->lock); +} + +/* + * Allocate the next available QPN or + * zero/one for QP type IB_QPT_SMI/IB_QPT_GSI. + */ +static int alloc_qpn(struct hfi1_devdata *dd, struct hfi1_qpn_table *qpt, + enum ib_qp_type type, u8 port) +{ + u32 i, offset, max_scan, qpn; + struct qpn_map *map; + u32 ret; + + if (type == IB_QPT_SMI || type == IB_QPT_GSI) { + unsigned n; + + ret = type == IB_QPT_GSI; + n = 1 << (ret + 2 * (port - 1)); + spin_lock(&qpt->lock); + if (qpt->flags & n) + ret = -EINVAL; + else + qpt->flags |= n; + spin_unlock(&qpt->lock); + goto bail; + } + + qpn = qpt->last + qpt->incr; + if (qpn >= QPN_MAX) + qpn = qpt->incr | ((qpt->last & 1) ^ 1); + /* offset carries bit 0 */ + offset = qpn & BITS_PER_PAGE_MASK; + map = &qpt->map[qpn / BITS_PER_PAGE]; + max_scan = qpt->nmaps - !offset; + for (i = 0;;) { + if (unlikely(!map->page)) { + get_map_page(qpt, map); + if (unlikely(!map->page)) + break; + } + do { + if (!test_and_set_bit(offset, map->page)) { + qpt->last = qpn; + ret = qpn; + goto bail; + } + offset += qpt->incr; + /* + * This qpn might be bogus if offset >= BITS_PER_PAGE. + * That is OK. It gets re-assigned below + */ + qpn = mk_qpn(qpt, map, offset); + } while (offset < BITS_PER_PAGE && qpn < QPN_MAX); + /* + * In order to keep the number of pages allocated to a + * minimum, we scan the all existing pages before increasing + * the size of the bitmap table. + */ + if (++i > max_scan) { + if (qpt->nmaps == QPNMAP_ENTRIES) + break; + map = &qpt->map[qpt->nmaps++]; + /* start at incr with current bit 0 */ + offset = qpt->incr | (offset & 1); + } else if (map < &qpt->map[qpt->nmaps]) { + ++map; + /* start at incr with current bit 0 */ + offset = qpt->incr | (offset & 1); + } else { + map = &qpt->map[0]; + /* wrap to first map page, invert bit 0 */ + offset = qpt->incr | ((offset & 1) ^ 1); + } + /* there can be no bits at shift and below */ + WARN_ON(offset & (dd->qos_shift - 1)); + qpn = mk_qpn(qpt, map, offset); + } + + ret = -ENOMEM; + +bail: + return ret; +} + +static void free_qpn(struct hfi1_qpn_table *qpt, u32 qpn) +{ + struct qpn_map *map; + + map = qpt->map + qpn / BITS_PER_PAGE; + if (map->page) + clear_bit(qpn & BITS_PER_PAGE_MASK, map->page); +} + +/* + * Put the QP into the hash table. + * The hash table holds a reference to the QP. + */ +static void insert_qp(struct hfi1_ibdev *dev, struct hfi1_qp *qp) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + unsigned long flags; + + atomic_inc(&qp->refcount); + spin_lock_irqsave(&dev->qp_dev->qpt_lock, flags); + + if (qp->ibqp.qp_num <= 1) { + rcu_assign_pointer(ibp->qp[qp->ibqp.qp_num], qp); + } else { + u32 n = qpn_hash(dev->qp_dev, qp->ibqp.qp_num); + + qp->next = dev->qp_dev->qp_table[n]; + rcu_assign_pointer(dev->qp_dev->qp_table[n], qp); + trace_hfi1_qpinsert(qp, n); + } + + spin_unlock_irqrestore(&dev->qp_dev->qpt_lock, flags); +} + +/* + * Remove the QP from the table so it can't be found asynchronously by + * the receive interrupt routine. + */ +static void remove_qp(struct hfi1_ibdev *dev, struct hfi1_qp *qp) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + u32 n = qpn_hash(dev->qp_dev, qp->ibqp.qp_num); + unsigned long flags; + int removed = 1; + + spin_lock_irqsave(&dev->qp_dev->qpt_lock, flags); + + if (rcu_dereference_protected(ibp->qp[0], + lockdep_is_held(&dev->qp_dev->qpt_lock)) == qp) { + RCU_INIT_POINTER(ibp->qp[0], NULL); + } else if (rcu_dereference_protected(ibp->qp[1], + lockdep_is_held(&dev->qp_dev->qpt_lock)) == qp) { + RCU_INIT_POINTER(ibp->qp[1], NULL); + } else { + struct hfi1_qp *q; + struct hfi1_qp __rcu **qpp; + + removed = 0; + qpp = &dev->qp_dev->qp_table[n]; + for (; (q = rcu_dereference_protected(*qpp, + lockdep_is_held(&dev->qp_dev->qpt_lock))) + != NULL; + qpp = &q->next) + if (q == qp) { + RCU_INIT_POINTER(*qpp, + rcu_dereference_protected(qp->next, + lockdep_is_held(&dev->qp_dev->qpt_lock))); + removed = 1; + trace_hfi1_qpremove(qp, n); + break; + } + } + + spin_unlock_irqrestore(&dev->qp_dev->qpt_lock, flags); + if (removed) { + synchronize_rcu(); + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); + } +} + +/** + * free_all_qps - check for QPs still in use + * @qpt: the QP table to empty + * + * There should not be any QPs still in use. + * Free memory for table. + */ +static unsigned free_all_qps(struct hfi1_devdata *dd) +{ + struct hfi1_ibdev *dev = &dd->verbs_dev; + unsigned long flags; + struct hfi1_qp *qp; + unsigned n, qp_inuse = 0; + + for (n = 0; n < dd->num_pports; n++) { + struct hfi1_ibport *ibp = &dd->pport[n].ibport_data; + + if (!hfi1_mcast_tree_empty(ibp)) + qp_inuse++; + rcu_read_lock(); + if (rcu_dereference(ibp->qp[0])) + qp_inuse++; + if (rcu_dereference(ibp->qp[1])) + qp_inuse++; + rcu_read_unlock(); + } + + if (!dev->qp_dev) + goto bail; + spin_lock_irqsave(&dev->qp_dev->qpt_lock, flags); + for (n = 0; n < dev->qp_dev->qp_table_size; n++) { + qp = rcu_dereference_protected(dev->qp_dev->qp_table[n], + lockdep_is_held(&dev->qp_dev->qpt_lock)); + RCU_INIT_POINTER(dev->qp_dev->qp_table[n], NULL); + + for (; qp; qp = rcu_dereference_protected(qp->next, + lockdep_is_held(&dev->qp_dev->qpt_lock))) + qp_inuse++; + } + spin_unlock_irqrestore(&dev->qp_dev->qpt_lock, flags); + synchronize_rcu(); +bail: + return qp_inuse; +} + +/** + * reset_qp - initialize the QP state to the reset state + * @qp: the QP to reset + * @type: the QP type + */ +static void reset_qp(struct hfi1_qp *qp, enum ib_qp_type type) +{ + qp->remote_qpn = 0; + qp->qkey = 0; + qp->qp_access_flags = 0; + iowait_init( + &qp->s_iowait, + 1, + hfi1_do_send, + iowait_sleep, + iowait_wakeup); + qp->s_flags &= HFI1_S_SIGNAL_REQ_WR; + qp->s_hdrwords = 0; + qp->s_wqe = NULL; + qp->s_draining = 0; + qp->s_next_psn = 0; + qp->s_last_psn = 0; + qp->s_sending_psn = 0; + qp->s_sending_hpsn = 0; + qp->s_psn = 0; + qp->r_psn = 0; + qp->r_msn = 0; + if (type == IB_QPT_RC) { + qp->s_state = IB_OPCODE_RC_SEND_LAST; + qp->r_state = IB_OPCODE_RC_SEND_LAST; + } else { + qp->s_state = IB_OPCODE_UC_SEND_LAST; + qp->r_state = IB_OPCODE_UC_SEND_LAST; + } + qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE; + qp->r_nak_state = 0; + qp->r_aflags = 0; + qp->r_flags = 0; + qp->s_head = 0; + qp->s_tail = 0; + qp->s_cur = 0; + qp->s_acked = 0; + qp->s_last = 0; + qp->s_ssn = 1; + qp->s_lsn = 0; + clear_ahg(qp); + qp->s_mig_state = IB_MIG_MIGRATED; + memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue)); + qp->r_head_ack_queue = 0; + qp->s_tail_ack_queue = 0; + qp->s_num_rd_atomic = 0; + if (qp->r_rq.wq) { + qp->r_rq.wq->head = 0; + qp->r_rq.wq->tail = 0; + } + qp->r_sge.num_sge = 0; +} + +static void clear_mr_refs(struct hfi1_qp *qp, int clr_sends) +{ + unsigned n; + + if (test_and_clear_bit(HFI1_R_REWIND_SGE, &qp->r_aflags)) + hfi1_put_ss(&qp->s_rdma_read_sge); + + hfi1_put_ss(&qp->r_sge); + + if (clr_sends) { + while (qp->s_last != qp->s_head) { + struct hfi1_swqe *wqe = get_swqe_ptr(qp, qp->s_last); + unsigned i; + + for (i = 0; i < wqe->wr.num_sge; i++) { + struct hfi1_sge *sge = &wqe->sg_list[i]; + + hfi1_put_mr(sge->mr); + } + if (qp->ibqp.qp_type == IB_QPT_UD || + qp->ibqp.qp_type == IB_QPT_SMI || + qp->ibqp.qp_type == IB_QPT_GSI) + atomic_dec(&to_iah(wqe->wr.wr.ud.ah)->refcount); + if (++qp->s_last >= qp->s_size) + qp->s_last = 0; + } + if (qp->s_rdma_mr) { + hfi1_put_mr(qp->s_rdma_mr); + qp->s_rdma_mr = NULL; + } + } + + if (qp->ibqp.qp_type != IB_QPT_RC) + return; + + for (n = 0; n < ARRAY_SIZE(qp->s_ack_queue); n++) { + struct hfi1_ack_entry *e = &qp->s_ack_queue[n]; + + if (e->opcode == IB_OPCODE_RC_RDMA_READ_REQUEST && + e->rdma_sge.mr) { + hfi1_put_mr(e->rdma_sge.mr); + e->rdma_sge.mr = NULL; + } + } +} + +/** + * hfi1_error_qp - put a QP into the error state + * @qp: the QP to put into the error state + * @err: the receive completion error to signal if a RWQE is active + * + * Flushes both send and receive work queues. + * Returns true if last WQE event should be generated. + * The QP r_lock and s_lock should be held and interrupts disabled. + * If we are already in error state, just return. + */ +int hfi1_error_qp(struct hfi1_qp *qp, enum ib_wc_status err) +{ + struct hfi1_ibdev *dev = to_idev(qp->ibqp.device); + struct ib_wc wc; + int ret = 0; + + if (qp->state == IB_QPS_ERR || qp->state == IB_QPS_RESET) + goto bail; + + qp->state = IB_QPS_ERR; + + if (qp->s_flags & (HFI1_S_TIMER | HFI1_S_WAIT_RNR)) { + qp->s_flags &= ~(HFI1_S_TIMER | HFI1_S_WAIT_RNR); + del_timer(&qp->s_timer); + } + + if (qp->s_flags & HFI1_S_ANY_WAIT_SEND) + qp->s_flags &= ~HFI1_S_ANY_WAIT_SEND; + + write_seqlock(&dev->iowait_lock); + if (!list_empty(&qp->s_iowait.list) && !(qp->s_flags & HFI1_S_BUSY)) { + qp->s_flags &= ~HFI1_S_ANY_WAIT_IO; + list_del_init(&qp->s_iowait.list); + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); + } + write_sequnlock(&dev->iowait_lock); + + if (!(qp->s_flags & HFI1_S_BUSY)) { + qp->s_hdrwords = 0; + if (qp->s_rdma_mr) { + hfi1_put_mr(qp->s_rdma_mr); + qp->s_rdma_mr = NULL; + } + flush_tx_list(qp); + } + + /* Schedule the sending tasklet to drain the send work queue. */ + if (qp->s_last != qp->s_head) + hfi1_schedule_send(qp); + + clear_mr_refs(qp, 0); + + memset(&wc, 0, sizeof(wc)); + wc.qp = &qp->ibqp; + wc.opcode = IB_WC_RECV; + + if (test_and_clear_bit(HFI1_R_WRID_VALID, &qp->r_aflags)) { + wc.wr_id = qp->r_wr_id; + wc.status = err; + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1); + } + wc.status = IB_WC_WR_FLUSH_ERR; + + if (qp->r_rq.wq) { + struct hfi1_rwq *wq; + u32 head; + u32 tail; + + spin_lock(&qp->r_rq.lock); + + /* sanity check pointers before trusting them */ + wq = qp->r_rq.wq; + head = wq->head; + if (head >= qp->r_rq.size) + head = 0; + tail = wq->tail; + if (tail >= qp->r_rq.size) + tail = 0; + while (tail != head) { + wc.wr_id = get_rwqe_ptr(&qp->r_rq, tail)->wr_id; + if (++tail >= qp->r_rq.size) + tail = 0; + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1); + } + wq->tail = tail; + + spin_unlock(&qp->r_rq.lock); + } else if (qp->ibqp.event_handler) + ret = 1; + +bail: + return ret; +} + +static void flush_tx_list(struct hfi1_qp *qp) +{ + while (!list_empty(&qp->s_iowait.tx_head)) { + struct sdma_txreq *tx; + + tx = list_first_entry( + &qp->s_iowait.tx_head, + struct sdma_txreq, + list); + list_del_init(&tx->list); + hfi1_put_txreq( + container_of(tx, struct verbs_txreq, txreq)); + } +} + +static void flush_iowait(struct hfi1_qp *qp) +{ + struct hfi1_ibdev *dev = to_idev(qp->ibqp.device); + unsigned long flags; + + write_seqlock_irqsave(&dev->iowait_lock, flags); + if (!list_empty(&qp->s_iowait.list)) { + list_del_init(&qp->s_iowait.list); + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); + } + write_sequnlock_irqrestore(&dev->iowait_lock, flags); +} + +static inline int opa_mtu_enum_to_int(int mtu) +{ + switch (mtu) { + case OPA_MTU_8192: return 8192; + case OPA_MTU_10240: return 10240; + default: return -1; + } +} + +/** + * This function is what we would push to the core layer if we wanted to be a + * "first class citizen". Instead we hide this here and rely on Verbs ULPs + * to blindly pass the MTU enum value from the PathRecord to us. + * + * The actual flag used to determine "8k MTU" will change and is currently + * unknown. + */ +static inline int verbs_mtu_enum_to_int(struct ib_device *dev, enum ib_mtu mtu) +{ + int val = opa_mtu_enum_to_int((int)mtu); + + if (val > 0) + return val; + return ib_mtu_enum_to_int(mtu); +} + + +/** + * hfi1_modify_qp - modify the attributes of a queue pair + * @ibqp: the queue pair who's attributes we're modifying + * @attr: the new attributes + * @attr_mask: the mask of attributes to modify + * @udata: user data for libibverbs.so + * + * Returns 0 on success, otherwise returns an errno. + */ +int hfi1_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_udata *udata) +{ + struct hfi1_ibdev *dev = to_idev(ibqp->device); + struct hfi1_qp *qp = to_iqp(ibqp); + enum ib_qp_state cur_state, new_state; + struct ib_event ev; + int lastwqe = 0; + int mig = 0; + int ret; + u32 pmtu = 0; /* for gcc warning only */ + struct hfi1_devdata *dd; + + spin_lock_irq(&qp->r_lock); + spin_lock(&qp->s_lock); + + cur_state = attr_mask & IB_QP_CUR_STATE ? + attr->cur_qp_state : qp->state; + new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state; + + if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, + attr_mask, IB_LINK_LAYER_UNSPECIFIED)) + goto inval; + + if (attr_mask & IB_QP_AV) { + if (attr->ah_attr.dlid >= HFI1_MULTICAST_LID_BASE) + goto inval; + if (hfi1_check_ah(qp->ibqp.device, &attr->ah_attr)) + goto inval; + } + + if (attr_mask & IB_QP_ALT_PATH) { + if (attr->alt_ah_attr.dlid >= HFI1_MULTICAST_LID_BASE) + goto inval; + if (hfi1_check_ah(qp->ibqp.device, &attr->alt_ah_attr)) + goto inval; + if (attr->alt_pkey_index >= hfi1_get_npkeys(dd_from_dev(dev))) + goto inval; + } + + if (attr_mask & IB_QP_PKEY_INDEX) + if (attr->pkey_index >= hfi1_get_npkeys(dd_from_dev(dev))) + goto inval; + + if (attr_mask & IB_QP_MIN_RNR_TIMER) + if (attr->min_rnr_timer > 31) + goto inval; + + if (attr_mask & IB_QP_PORT) + if (qp->ibqp.qp_type == IB_QPT_SMI || + qp->ibqp.qp_type == IB_QPT_GSI || + attr->port_num == 0 || + attr->port_num > ibqp->device->phys_port_cnt) + goto inval; + + if (attr_mask & IB_QP_DEST_QPN) + if (attr->dest_qp_num > HFI1_QPN_MASK) + goto inval; + + if (attr_mask & IB_QP_RETRY_CNT) + if (attr->retry_cnt > 7) + goto inval; + + if (attr_mask & IB_QP_RNR_RETRY) + if (attr->rnr_retry > 7) + goto inval; + + /* + * Don't allow invalid path_mtu values. OK to set greater + * than the active mtu (or even the max_cap, if we have tuned + * that to a small mtu. We'll set qp->path_mtu + * to the lesser of requested attribute mtu and active, + * for packetizing messages. + * Note that the QP port has to be set in INIT and MTU in RTR. + */ + if (attr_mask & IB_QP_PATH_MTU) { + int mtu, pidx = qp->port_num - 1; + + dd = dd_from_dev(dev); + mtu = verbs_mtu_enum_to_int(ibqp->device, attr->path_mtu); + if (mtu == -1) + goto inval; + + if (mtu > dd->pport[pidx].ibmtu) + pmtu = mtu_to_enum(dd->pport[pidx].ibmtu, IB_MTU_2048); + else + pmtu = attr->path_mtu; + } + + if (attr_mask & IB_QP_PATH_MIG_STATE) { + if (attr->path_mig_state == IB_MIG_REARM) { + if (qp->s_mig_state == IB_MIG_ARMED) + goto inval; + if (new_state != IB_QPS_RTS) + goto inval; + } else if (attr->path_mig_state == IB_MIG_MIGRATED) { + if (qp->s_mig_state == IB_MIG_REARM) + goto inval; + if (new_state != IB_QPS_RTS && new_state != IB_QPS_SQD) + goto inval; + if (qp->s_mig_state == IB_MIG_ARMED) + mig = 1; + } else + goto inval; + } + + if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) + if (attr->max_dest_rd_atomic > HFI1_MAX_RDMA_ATOMIC) + goto inval; + + switch (new_state) { + case IB_QPS_RESET: + if (qp->state != IB_QPS_RESET) { + qp->state = IB_QPS_RESET; + flush_iowait(qp); + qp->s_flags &= ~(HFI1_S_TIMER | HFI1_S_ANY_WAIT); + spin_unlock(&qp->s_lock); + spin_unlock_irq(&qp->r_lock); + /* Stop the sending work queue and retry timer */ + cancel_work_sync(&qp->s_iowait.iowork); + del_timer_sync(&qp->s_timer); + iowait_sdma_drain(&qp->s_iowait); + flush_tx_list(qp); + remove_qp(dev, qp); + wait_event(qp->wait, !atomic_read(&qp->refcount)); + spin_lock_irq(&qp->r_lock); + spin_lock(&qp->s_lock); + clear_mr_refs(qp, 1); + clear_ahg(qp); + reset_qp(qp, ibqp->qp_type); + } + break; + + case IB_QPS_RTR: + /* Allow event to re-trigger if QP set to RTR more than once */ + qp->r_flags &= ~HFI1_R_COMM_EST; + qp->state = new_state; + break; + + case IB_QPS_SQD: + qp->s_draining = qp->s_last != qp->s_cur; + qp->state = new_state; + break; + + case IB_QPS_SQE: + if (qp->ibqp.qp_type == IB_QPT_RC) + goto inval; + qp->state = new_state; + break; + + case IB_QPS_ERR: + lastwqe = hfi1_error_qp(qp, IB_WC_WR_FLUSH_ERR); + break; + + default: + qp->state = new_state; + break; + } + + if (attr_mask & IB_QP_PKEY_INDEX) + qp->s_pkey_index = attr->pkey_index; + + if (attr_mask & IB_QP_PORT) + qp->port_num = attr->port_num; + + if (attr_mask & IB_QP_DEST_QPN) + qp->remote_qpn = attr->dest_qp_num; + + if (attr_mask & IB_QP_SQ_PSN) { + qp->s_next_psn = attr->sq_psn & PSN_MODIFY_MASK; + qp->s_psn = qp->s_next_psn; + qp->s_sending_psn = qp->s_next_psn; + qp->s_last_psn = qp->s_next_psn - 1; + qp->s_sending_hpsn = qp->s_last_psn; + } + + if (attr_mask & IB_QP_RQ_PSN) + qp->r_psn = attr->rq_psn & PSN_MODIFY_MASK; + + if (attr_mask & IB_QP_ACCESS_FLAGS) + qp->qp_access_flags = attr->qp_access_flags; + + if (attr_mask & IB_QP_AV) { + qp->remote_ah_attr = attr->ah_attr; + qp->s_srate = attr->ah_attr.static_rate; + qp->srate_mbps = ib_rate_to_mbps(qp->s_srate); + } + + if (attr_mask & IB_QP_ALT_PATH) { + qp->alt_ah_attr = attr->alt_ah_attr; + qp->s_alt_pkey_index = attr->alt_pkey_index; + } + + if (attr_mask & IB_QP_PATH_MIG_STATE) { + qp->s_mig_state = attr->path_mig_state; + if (mig) { + qp->remote_ah_attr = qp->alt_ah_attr; + qp->port_num = qp->alt_ah_attr.port_num; + qp->s_pkey_index = qp->s_alt_pkey_index; + qp->s_flags |= HFI1_S_AHG_CLEAR; + } + } + + if (attr_mask & IB_QP_PATH_MTU) { + struct hfi1_ibport *ibp; + u8 sc, vl; + u32 mtu; + + dd = dd_from_dev(dev); + ibp = &dd->pport[qp->port_num - 1].ibport_data; + + sc = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + vl = sc_to_vlt(dd, sc); + + mtu = verbs_mtu_enum_to_int(ibqp->device, pmtu); + if (vl < PER_VL_SEND_CONTEXTS) + mtu = min_t(u32, mtu, dd->vld[vl].mtu); + pmtu = mtu_to_enum(mtu, OPA_MTU_8192); + + qp->path_mtu = pmtu; + qp->pmtu = mtu; + } + + if (attr_mask & IB_QP_RETRY_CNT) { + qp->s_retry_cnt = attr->retry_cnt; + qp->s_retry = attr->retry_cnt; + } + + if (attr_mask & IB_QP_RNR_RETRY) { + qp->s_rnr_retry_cnt = attr->rnr_retry; + qp->s_rnr_retry = attr->rnr_retry; + } + + if (attr_mask & IB_QP_MIN_RNR_TIMER) + qp->r_min_rnr_timer = attr->min_rnr_timer; + + if (attr_mask & IB_QP_TIMEOUT) { + qp->timeout = attr->timeout; + qp->timeout_jiffies = + usecs_to_jiffies((4096UL * (1UL << qp->timeout)) / + 1000UL); + } + + if (attr_mask & IB_QP_QKEY) + qp->qkey = attr->qkey; + + if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) + qp->r_max_rd_atomic = attr->max_dest_rd_atomic; + + if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC) + qp->s_max_rd_atomic = attr->max_rd_atomic; + + spin_unlock(&qp->s_lock); + spin_unlock_irq(&qp->r_lock); + + if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) + insert_qp(dev, qp); + + if (lastwqe) { + ev.device = qp->ibqp.device; + ev.element.qp = &qp->ibqp; + ev.event = IB_EVENT_QP_LAST_WQE_REACHED; + qp->ibqp.event_handler(&ev, qp->ibqp.qp_context); + } + if (mig) { + ev.device = qp->ibqp.device; + ev.element.qp = &qp->ibqp; + ev.event = IB_EVENT_PATH_MIG; + qp->ibqp.event_handler(&ev, qp->ibqp.qp_context); + } + ret = 0; + goto bail; + +inval: + spin_unlock(&qp->s_lock); + spin_unlock_irq(&qp->r_lock); + ret = -EINVAL; + +bail: + return ret; +} + +int hfi1_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_qp_init_attr *init_attr) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + + attr->qp_state = qp->state; + attr->cur_qp_state = attr->qp_state; + attr->path_mtu = qp->path_mtu; + attr->path_mig_state = qp->s_mig_state; + attr->qkey = qp->qkey; + attr->rq_psn = mask_psn(qp->r_psn); + attr->sq_psn = mask_psn(qp->s_next_psn); + attr->dest_qp_num = qp->remote_qpn; + attr->qp_access_flags = qp->qp_access_flags; + attr->cap.max_send_wr = qp->s_size - 1; + attr->cap.max_recv_wr = qp->ibqp.srq ? 0 : qp->r_rq.size - 1; + attr->cap.max_send_sge = qp->s_max_sge; + attr->cap.max_recv_sge = qp->r_rq.max_sge; + attr->cap.max_inline_data = 0; + attr->ah_attr = qp->remote_ah_attr; + attr->alt_ah_attr = qp->alt_ah_attr; + attr->pkey_index = qp->s_pkey_index; + attr->alt_pkey_index = qp->s_alt_pkey_index; + attr->en_sqd_async_notify = 0; + attr->sq_draining = qp->s_draining; + attr->max_rd_atomic = qp->s_max_rd_atomic; + attr->max_dest_rd_atomic = qp->r_max_rd_atomic; + attr->min_rnr_timer = qp->r_min_rnr_timer; + attr->port_num = qp->port_num; + attr->timeout = qp->timeout; + attr->retry_cnt = qp->s_retry_cnt; + attr->rnr_retry = qp->s_rnr_retry_cnt; + attr->alt_port_num = qp->alt_ah_attr.port_num; + attr->alt_timeout = qp->alt_timeout; + + init_attr->event_handler = qp->ibqp.event_handler; + init_attr->qp_context = qp->ibqp.qp_context; + init_attr->send_cq = qp->ibqp.send_cq; + init_attr->recv_cq = qp->ibqp.recv_cq; + init_attr->srq = qp->ibqp.srq; + init_attr->cap = attr->cap; + if (qp->s_flags & HFI1_S_SIGNAL_REQ_WR) + init_attr->sq_sig_type = IB_SIGNAL_REQ_WR; + else + init_attr->sq_sig_type = IB_SIGNAL_ALL_WR; + init_attr->qp_type = qp->ibqp.qp_type; + init_attr->port_num = qp->port_num; + return 0; +} + +/** + * hfi1_compute_aeth - compute the AETH (syndrome + MSN) + * @qp: the queue pair to compute the AETH for + * + * Returns the AETH. + */ +__be32 hfi1_compute_aeth(struct hfi1_qp *qp) +{ + u32 aeth = qp->r_msn & HFI1_MSN_MASK; + + if (qp->ibqp.srq) { + /* + * Shared receive queues don't generate credits. + * Set the credit field to the invalid value. + */ + aeth |= HFI1_AETH_CREDIT_INVAL << HFI1_AETH_CREDIT_SHIFT; + } else { + u32 min, max, x; + u32 credits; + struct hfi1_rwq *wq = qp->r_rq.wq; + u32 head; + u32 tail; + + /* sanity check pointers before trusting them */ + head = wq->head; + if (head >= qp->r_rq.size) + head = 0; + tail = wq->tail; + if (tail >= qp->r_rq.size) + tail = 0; + /* + * Compute the number of credits available (RWQEs). + * There is a small chance that the pair of reads are + * not atomic, which is OK, since the fuzziness is + * resolved as further ACKs go out. + */ + credits = head - tail; + if ((int)credits < 0) + credits += qp->r_rq.size; + /* + * Binary search the credit table to find the code to + * use. + */ + min = 0; + max = 31; + for (;;) { + x = (min + max) / 2; + if (credit_table[x] == credits) + break; + if (credit_table[x] > credits) + max = x; + else if (min == x) + break; + else + min = x; + } + aeth |= x << HFI1_AETH_CREDIT_SHIFT; + } + return cpu_to_be32(aeth); +} + +/** + * hfi1_create_qp - create a queue pair for a device + * @ibpd: the protection domain who's device we create the queue pair for + * @init_attr: the attributes of the queue pair + * @udata: user data for libibverbs.so + * + * Returns the queue pair on success, otherwise returns an errno. + * + * Called by the ib_create_qp() core verbs function. + */ +struct ib_qp *hfi1_create_qp(struct ib_pd *ibpd, + struct ib_qp_init_attr *init_attr, + struct ib_udata *udata) +{ + struct hfi1_qp *qp; + int err; + struct hfi1_swqe *swq = NULL; + struct hfi1_ibdev *dev; + struct hfi1_devdata *dd; + size_t sz; + size_t sg_list_sz; + struct ib_qp *ret; + + if (init_attr->cap.max_send_sge > hfi1_max_sges || + init_attr->cap.max_send_wr > hfi1_max_qp_wrs || + init_attr->create_flags) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + + /* Check receive queue parameters if no SRQ is specified. */ + if (!init_attr->srq) { + if (init_attr->cap.max_recv_sge > hfi1_max_sges || + init_attr->cap.max_recv_wr > hfi1_max_qp_wrs) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + if (init_attr->cap.max_send_sge + + init_attr->cap.max_send_wr + + init_attr->cap.max_recv_sge + + init_attr->cap.max_recv_wr == 0) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + } + + switch (init_attr->qp_type) { + case IB_QPT_SMI: + case IB_QPT_GSI: + if (init_attr->port_num == 0 || + init_attr->port_num > ibpd->device->phys_port_cnt) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + case IB_QPT_UC: + case IB_QPT_RC: + case IB_QPT_UD: + sz = sizeof(struct hfi1_sge) * + init_attr->cap.max_send_sge + + sizeof(struct hfi1_swqe); + swq = vmalloc((init_attr->cap.max_send_wr + 1) * sz); + if (swq == NULL) { + ret = ERR_PTR(-ENOMEM); + goto bail; + } + sz = sizeof(*qp); + sg_list_sz = 0; + if (init_attr->srq) { + struct hfi1_srq *srq = to_isrq(init_attr->srq); + + if (srq->rq.max_sge > 1) + sg_list_sz = sizeof(*qp->r_sg_list) * + (srq->rq.max_sge - 1); + } else if (init_attr->cap.max_recv_sge > 1) + sg_list_sz = sizeof(*qp->r_sg_list) * + (init_attr->cap.max_recv_sge - 1); + qp = kzalloc(sz + sg_list_sz, GFP_KERNEL); + if (!qp) { + ret = ERR_PTR(-ENOMEM); + goto bail_swq; + } + RCU_INIT_POINTER(qp->next, NULL); + qp->s_hdr = kzalloc(sizeof(*qp->s_hdr), GFP_KERNEL); + if (!qp->s_hdr) { + ret = ERR_PTR(-ENOMEM); + goto bail_qp; + } + qp->timeout_jiffies = + usecs_to_jiffies((4096UL * (1UL << qp->timeout)) / + 1000UL); + if (init_attr->srq) + sz = 0; + else { + qp->r_rq.size = init_attr->cap.max_recv_wr + 1; + qp->r_rq.max_sge = init_attr->cap.max_recv_sge; + sz = (sizeof(struct ib_sge) * qp->r_rq.max_sge) + + sizeof(struct hfi1_rwqe); + qp->r_rq.wq = vmalloc_user(sizeof(struct hfi1_rwq) + + qp->r_rq.size * sz); + if (!qp->r_rq.wq) { + ret = ERR_PTR(-ENOMEM); + goto bail_qp; + } + } + + /* + * ib_create_qp() will initialize qp->ibqp + * except for qp->ibqp.qp_num. + */ + spin_lock_init(&qp->r_lock); + spin_lock_init(&qp->s_lock); + spin_lock_init(&qp->r_rq.lock); + atomic_set(&qp->refcount, 0); + init_waitqueue_head(&qp->wait); + init_timer(&qp->s_timer); + qp->s_timer.data = (unsigned long)qp; + INIT_LIST_HEAD(&qp->rspwait); + qp->state = IB_QPS_RESET; + qp->s_wq = swq; + qp->s_size = init_attr->cap.max_send_wr + 1; + qp->s_max_sge = init_attr->cap.max_send_sge; + if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR) + qp->s_flags = HFI1_S_SIGNAL_REQ_WR; + dev = to_idev(ibpd->device); + dd = dd_from_dev(dev); + err = alloc_qpn(dd, &dev->qp_dev->qpn_table, init_attr->qp_type, + init_attr->port_num); + if (err < 0) { + ret = ERR_PTR(err); + vfree(qp->r_rq.wq); + goto bail_qp; + } + qp->ibqp.qp_num = err; + qp->port_num = init_attr->port_num; + reset_qp(qp, init_attr->qp_type); + + break; + + default: + /* Don't support raw QPs */ + ret = ERR_PTR(-ENOSYS); + goto bail; + } + + init_attr->cap.max_inline_data = 0; + + /* + * Return the address of the RWQ as the offset to mmap. + * See hfi1_mmap() for details. + */ + if (udata && udata->outlen >= sizeof(__u64)) { + if (!qp->r_rq.wq) { + __u64 offset = 0; + + err = ib_copy_to_udata(udata, &offset, + sizeof(offset)); + if (err) { + ret = ERR_PTR(err); + goto bail_ip; + } + } else { + u32 s = sizeof(struct hfi1_rwq) + qp->r_rq.size * sz; + + qp->ip = hfi1_create_mmap_info(dev, s, + ibpd->uobject->context, + qp->r_rq.wq); + if (!qp->ip) { + ret = ERR_PTR(-ENOMEM); + goto bail_ip; + } + + err = ib_copy_to_udata(udata, &(qp->ip->offset), + sizeof(qp->ip->offset)); + if (err) { + ret = ERR_PTR(err); + goto bail_ip; + } + } + } + + spin_lock(&dev->n_qps_lock); + if (dev->n_qps_allocated == hfi1_max_qps) { + spin_unlock(&dev->n_qps_lock); + ret = ERR_PTR(-ENOMEM); + goto bail_ip; + } + + dev->n_qps_allocated++; + spin_unlock(&dev->n_qps_lock); + + if (qp->ip) { + spin_lock_irq(&dev->pending_lock); + list_add(&qp->ip->pending_mmaps, &dev->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + } + + ret = &qp->ibqp; + + /* + * We have our QP and its good, now keep track of what types of opcodes + * can be processed on this QP. We do this by keeping track of what the + * 3 high order bits of the opcode are. + */ + switch (init_attr->qp_type) { + case IB_QPT_SMI: + case IB_QPT_GSI: + case IB_QPT_UD: + qp->allowed_ops = IB_OPCODE_UD_SEND_ONLY & OPCODE_QP_MASK; + break; + case IB_QPT_RC: + qp->allowed_ops = IB_OPCODE_RC_SEND_ONLY & OPCODE_QP_MASK; + break; + case IB_QPT_UC: + qp->allowed_ops = IB_OPCODE_UC_SEND_ONLY & OPCODE_QP_MASK; + break; + default: + ret = ERR_PTR(-EINVAL); + goto bail_ip; + } + + goto bail; + +bail_ip: + if (qp->ip) + kref_put(&qp->ip->ref, hfi1_release_mmap_info); + else + vfree(qp->r_rq.wq); + free_qpn(&dev->qp_dev->qpn_table, qp->ibqp.qp_num); +bail_qp: + kfree(qp->s_hdr); + kfree(qp); +bail_swq: + vfree(swq); +bail: + return ret; +} + +/** + * hfi1_destroy_qp - destroy a queue pair + * @ibqp: the queue pair to destroy + * + * Returns 0 on success. + * + * Note that this can be called while the QP is actively sending or + * receiving! + */ +int hfi1_destroy_qp(struct ib_qp *ibqp) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + struct hfi1_ibdev *dev = to_idev(ibqp->device); + + /* Make sure HW and driver activity is stopped. */ + spin_lock_irq(&qp->r_lock); + spin_lock(&qp->s_lock); + if (qp->state != IB_QPS_RESET) { + qp->state = IB_QPS_RESET; + flush_iowait(qp); + qp->s_flags &= ~(HFI1_S_TIMER | HFI1_S_ANY_WAIT); + spin_unlock(&qp->s_lock); + spin_unlock_irq(&qp->r_lock); + cancel_work_sync(&qp->s_iowait.iowork); + del_timer_sync(&qp->s_timer); + iowait_sdma_drain(&qp->s_iowait); + flush_tx_list(qp); + remove_qp(dev, qp); + wait_event(qp->wait, !atomic_read(&qp->refcount)); + spin_lock_irq(&qp->r_lock); + spin_lock(&qp->s_lock); + clear_mr_refs(qp, 1); + clear_ahg(qp); + } + spin_unlock(&qp->s_lock); + spin_unlock_irq(&qp->r_lock); + + /* all user's cleaned up, mark it available */ + free_qpn(&dev->qp_dev->qpn_table, qp->ibqp.qp_num); + spin_lock(&dev->n_qps_lock); + dev->n_qps_allocated--; + spin_unlock(&dev->n_qps_lock); + + if (qp->ip) + kref_put(&qp->ip->ref, hfi1_release_mmap_info); + else + vfree(qp->r_rq.wq); + vfree(qp->s_wq); + kfree(qp->s_hdr); + kfree(qp); + return 0; +} + +/** + * init_qpn_table - initialize the QP number table for a device + * @qpt: the QPN table + */ +static int init_qpn_table(struct hfi1_devdata *dd, struct hfi1_qpn_table *qpt) +{ + u32 offset, qpn, i; + struct qpn_map *map; + int ret = 0; + + spin_lock_init(&qpt->lock); + + qpt->last = 0; + qpt->incr = 1 << dd->qos_shift; + + /* insure we don't assign QPs from KDETH 64K window */ + qpn = kdeth_qp << 16; + qpt->nmaps = qpn / BITS_PER_PAGE; + /* This should always be zero */ + offset = qpn & BITS_PER_PAGE_MASK; + map = &qpt->map[qpt->nmaps]; + dd_dev_info(dd, "Reserving QPNs for KDETH window from 0x%x to 0x%x\n", + qpn, qpn + 65535); + for (i = 0; i < 65536; i++) { + if (!map->page) { + get_map_page(qpt, map); + if (!map->page) { + ret = -ENOMEM; + break; + } + } + set_bit(offset, map->page); + offset++; + if (offset == BITS_PER_PAGE) { + /* next page */ + qpt->nmaps++; + map++; + offset = 0; + } + } + return ret; +} + +/** + * free_qpn_table - free the QP number table for a device + * @qpt: the QPN table + */ +static void free_qpn_table(struct hfi1_qpn_table *qpt) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(qpt->map); i++) + free_page((unsigned long) qpt->map[i].page); +} + +/** + * hfi1_get_credit - flush the send work queue of a QP + * @qp: the qp who's send work queue to flush + * @aeth: the Acknowledge Extended Transport Header + * + * The QP s_lock should be held. + */ +void hfi1_get_credit(struct hfi1_qp *qp, u32 aeth) +{ + u32 credit = (aeth >> HFI1_AETH_CREDIT_SHIFT) & HFI1_AETH_CREDIT_MASK; + + /* + * If the credit is invalid, we can send + * as many packets as we like. Otherwise, we have to + * honor the credit field. + */ + if (credit == HFI1_AETH_CREDIT_INVAL) { + if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT)) { + qp->s_flags |= HFI1_S_UNLIMITED_CREDIT; + if (qp->s_flags & HFI1_S_WAIT_SSN_CREDIT) { + qp->s_flags &= ~HFI1_S_WAIT_SSN_CREDIT; + hfi1_schedule_send(qp); + } + } + } else if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT)) { + /* Compute new LSN (i.e., MSN + credit) */ + credit = (aeth + credit_table[credit]) & HFI1_MSN_MASK; + if (cmp_msn(credit, qp->s_lsn) > 0) { + qp->s_lsn = credit; + if (qp->s_flags & HFI1_S_WAIT_SSN_CREDIT) { + qp->s_flags &= ~HFI1_S_WAIT_SSN_CREDIT; + hfi1_schedule_send(qp); + } + } + } +} + +void hfi1_qp_wakeup(struct hfi1_qp *qp, u32 flag) +{ + unsigned long flags; + + spin_lock_irqsave(&qp->s_lock, flags); + if (qp->s_flags & flag) { + qp->s_flags &= ~flag; + trace_hfi1_qpwakeup(qp, flag); + hfi1_schedule_send(qp); + } + spin_unlock_irqrestore(&qp->s_lock, flags); + /* Notify hfi1_destroy_qp() if it is waiting. */ + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); +} + +static int iowait_sleep( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *stx, + unsigned seq) +{ + struct verbs_txreq *tx = container_of(stx, struct verbs_txreq, txreq); + struct hfi1_qp *qp; + unsigned long flags; + int ret = 0; + struct hfi1_ibdev *dev; + + qp = tx->qp; + + spin_lock_irqsave(&qp->s_lock, flags); + if (ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK) { + + /* + * If we couldn't queue the DMA request, save the info + * and try again later rather than destroying the + * buffer and undoing the side effects of the copy. + */ + /* Make a common routine? */ + dev = &sde->dd->verbs_dev; + list_add_tail(&stx->list, &wait->tx_head); + write_seqlock(&dev->iowait_lock); + if (sdma_progress(sde, seq, stx)) + goto eagain; + if (list_empty(&qp->s_iowait.list)) { + struct hfi1_ibport *ibp = + to_iport(qp->ibqp.device, qp->port_num); + + ibp->n_dmawait++; + qp->s_flags |= HFI1_S_WAIT_DMA_DESC; + list_add_tail(&qp->s_iowait.list, &sde->dmawait); + trace_hfi1_qpsleep(qp, HFI1_S_WAIT_DMA_DESC); + atomic_inc(&qp->refcount); + } + write_sequnlock(&dev->iowait_lock); + qp->s_flags &= ~HFI1_S_BUSY; + spin_unlock_irqrestore(&qp->s_lock, flags); + ret = -EBUSY; + } else { + spin_unlock_irqrestore(&qp->s_lock, flags); + hfi1_put_txreq(tx); + } + return ret; +eagain: + write_sequnlock(&dev->iowait_lock); + spin_unlock_irqrestore(&qp->s_lock, flags); + list_del_init(&stx->list); + return -EAGAIN; +} + +static void iowait_wakeup(struct iowait *wait, int reason) +{ + struct hfi1_qp *qp = container_of(wait, struct hfi1_qp, s_iowait); + + WARN_ON(reason != SDMA_AVAIL_REASON); + hfi1_qp_wakeup(qp, HFI1_S_WAIT_DMA_DESC); +} + +int hfi1_qp_init(struct hfi1_ibdev *dev) +{ + struct hfi1_devdata *dd = dd_from_dev(dev); + int i; + int ret = -ENOMEM; + + /* allocate parent object */ + dev->qp_dev = kzalloc(sizeof(*dev->qp_dev), GFP_KERNEL); + if (!dev->qp_dev) + goto nomem; + /* allocate hash table */ + dev->qp_dev->qp_table_size = hfi1_qp_table_size; + dev->qp_dev->qp_table_bits = ilog2(hfi1_qp_table_size); + dev->qp_dev->qp_table = + kmalloc(dev->qp_dev->qp_table_size * + sizeof(*dev->qp_dev->qp_table), + GFP_KERNEL); + if (!dev->qp_dev->qp_table) + goto nomem; + for (i = 0; i < dev->qp_dev->qp_table_size; i++) + RCU_INIT_POINTER(dev->qp_dev->qp_table[i], NULL); + spin_lock_init(&dev->qp_dev->qpt_lock); + /* initialize qpn map */ + ret = init_qpn_table(dd, &dev->qp_dev->qpn_table); + if (ret) + goto nomem; + return ret; +nomem: + if (dev->qp_dev) { + kfree(dev->qp_dev->qp_table); + free_qpn_table(&dev->qp_dev->qpn_table); + kfree(dev->qp_dev); + } + return ret; +} + +void hfi1_qp_exit(struct hfi1_ibdev *dev) +{ + struct hfi1_devdata *dd = dd_from_dev(dev); + u32 qps_inuse; + + qps_inuse = free_all_qps(dd); + if (qps_inuse) + dd_dev_err(dd, "QP memory leak! %u still in use\n", + qps_inuse); + if (dev->qp_dev) { + kfree(dev->qp_dev->qp_table); + free_qpn_table(&dev->qp_dev->qpn_table); + kfree(dev->qp_dev); + } +} + +/** + * + * qp_to_sdma_engine - map a qp to a send engine + * @qp: the QP + * @sc5: the 5 bit sc + * + * Return: + * A send engine for the qp or NULL for SMI type qp. + */ +struct sdma_engine *qp_to_sdma_engine(struct hfi1_qp *qp, u8 sc5) +{ + struct hfi1_devdata *dd = dd_from_ibdev(qp->ibqp.device); + struct sdma_engine *sde; + + if (!(dd->flags & HFI1_HAS_SEND_DMA)) + return NULL; + switch (qp->ibqp.qp_type) { + case IB_QPT_UC: + case IB_QPT_RC: + break; + case IB_QPT_SMI: + return NULL; + default: + break; + } + sde = sdma_select_engine_sc(dd, qp->ibqp.qp_num >> dd->qos_shift, sc5); + return sde; +} + +struct qp_iter { + struct hfi1_ibdev *dev; + struct hfi1_qp *qp; + int specials; + int n; +}; + +struct qp_iter *qp_iter_init(struct hfi1_ibdev *dev) +{ + struct qp_iter *iter; + + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (!iter) + return NULL; + + iter->dev = dev; + iter->specials = dev->ibdev.phys_port_cnt * 2; + if (qp_iter_next(iter)) { + kfree(iter); + return NULL; + } + + return iter; +} + +int qp_iter_next(struct qp_iter *iter) +{ + struct hfi1_ibdev *dev = iter->dev; + int n = iter->n; + int ret = 1; + struct hfi1_qp *pqp = iter->qp; + struct hfi1_qp *qp; + + /* + * The approach is to consider the special qps + * as an additional table entries before the + * real hash table. Since the qp code sets + * the qp->next hash link to NULL, this works just fine. + * + * iter->specials is 2 * # ports + * + * n = 0..iter->specials is the special qp indices + * + * n = iter->specials..dev->qp_dev->qp_table_size+iter->specials are + * the potential hash bucket entries + * + */ + for (; n < dev->qp_dev->qp_table_size + iter->specials; n++) { + if (pqp) { + qp = rcu_dereference(pqp->next); + } else { + if (n < iter->specials) { + struct hfi1_pportdata *ppd; + struct hfi1_ibport *ibp; + int pidx; + + pidx = n % dev->ibdev.phys_port_cnt; + ppd = &dd_from_dev(dev)->pport[pidx]; + ibp = &ppd->ibport_data; + + if (!(n & 1)) + qp = rcu_dereference(ibp->qp[0]); + else + qp = rcu_dereference(ibp->qp[1]); + } else { + qp = rcu_dereference( + dev->qp_dev->qp_table[ + (n - iter->specials)]); + } + } + pqp = qp; + if (qp) { + iter->qp = qp; + iter->n = n; + return 0; + } + } + return ret; +} + +static const char * const qp_type_str[] = { + "SMI", "GSI", "RC", "UC", "UD", +}; + +static int qp_idle(struct hfi1_qp *qp) +{ + return + qp->s_last == qp->s_acked && + qp->s_acked == qp->s_cur && + qp->s_cur == qp->s_tail && + qp->s_tail == qp->s_head; +} + +void qp_iter_print(struct seq_file *s, struct qp_iter *iter) +{ + struct hfi1_swqe *wqe; + struct hfi1_qp *qp = iter->qp; + struct sdma_engine *sde; + + sde = qp_to_sdma_engine(qp, qp->s_sc); + wqe = get_swqe_ptr(qp, qp->s_last); + seq_printf(s, + "N %d %s QP%u R %u %s %u %u %u f=%x %u %u %u %u %u PSN %x %x %x %x %x (%u %u %u %u %u %u) QP%u LID %x SL %u MTU %d %u %u %u SDE %p,%u\n", + iter->n, + qp_idle(qp) ? "I" : "B", + qp->ibqp.qp_num, + atomic_read(&qp->refcount), + qp_type_str[qp->ibqp.qp_type], + qp->state, + wqe ? wqe->wr.opcode : 0, + qp->s_hdrwords, + qp->s_flags, + atomic_read(&qp->s_iowait.sdma_busy), + !list_empty(&qp->s_iowait.list), + qp->timeout, + wqe ? wqe->ssn : 0, + qp->s_lsn, + qp->s_last_psn, + qp->s_psn, qp->s_next_psn, + qp->s_sending_psn, qp->s_sending_hpsn, + qp->s_last, qp->s_acked, qp->s_cur, + qp->s_tail, qp->s_head, qp->s_size, + qp->remote_qpn, + qp->remote_ah_attr.dlid, + qp->remote_ah_attr.sl, + qp->pmtu, + qp->s_retry_cnt, + qp->timeout, + qp->s_rnr_retry_cnt, + sde, + sde ? sde->this_idx : 0); +} + +void qp_comm_est(struct hfi1_qp *qp) +{ + qp->r_flags |= HFI1_R_COMM_EST; + if (qp->ibqp.event_handler) { + struct ib_event ev; + + ev.device = qp->ibqp.device; + ev.element.qp = &qp->ibqp; + ev.event = IB_EVENT_COMM_EST; + qp->ibqp.event_handler(&ev, qp->ibqp.qp_context); + } +} diff --git a/drivers/staging/rdma/hfi1/qp.h b/drivers/staging/rdma/hfi1/qp.h new file mode 100644 index 000000000000..6b505859b59c --- /dev/null +++ b/drivers/staging/rdma/hfi1/qp.h @@ -0,0 +1,235 @@ +#ifndef _QP_H +#define _QP_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/hash.h> +#include "verbs.h" + +#define QPN_MAX (1 << 24) +#define QPNMAP_ENTRIES (QPN_MAX / PAGE_SIZE / BITS_PER_BYTE) + +/* + * QPN-map pages start out as NULL, they get allocated upon + * first use and are never deallocated. This way, + * large bitmaps are not allocated unless large numbers of QPs are used. + */ +struct qpn_map { + void *page; +}; + +struct hfi1_qpn_table { + spinlock_t lock; /* protect changes in this struct */ + unsigned flags; /* flags for QP0/1 allocated for each port */ + u32 last; /* last QP number allocated */ + u32 nmaps; /* size of the map table */ + u16 limit; + u8 incr; + /* bit map of free QP numbers other than 0/1 */ + struct qpn_map map[QPNMAP_ENTRIES]; +}; + +struct hfi1_qp_ibdev { + u32 qp_table_size; + u32 qp_table_bits; + struct hfi1_qp __rcu **qp_table; + spinlock_t qpt_lock; + struct hfi1_qpn_table qpn_table; +}; + +static inline u32 qpn_hash(struct hfi1_qp_ibdev *dev, u32 qpn) +{ + return hash_32(qpn, dev->qp_table_bits); +} + +/** + * hfi1_lookup_qpn - return the QP with the given QPN + * @ibp: the ibport + * @qpn: the QP number to look up + * + * The caller must hold the rcu_read_lock(), and keep the lock until + * the returned qp is no longer in use. + */ +static inline struct hfi1_qp *hfi1_lookup_qpn(struct hfi1_ibport *ibp, + u32 qpn) __must_hold(RCU) +{ + struct hfi1_qp *qp = NULL; + + if (unlikely(qpn <= 1)) { + qp = rcu_dereference(ibp->qp[qpn]); + } else { + struct hfi1_ibdev *dev = &ppd_from_ibp(ibp)->dd->verbs_dev; + u32 n = qpn_hash(dev->qp_dev, qpn); + + for (qp = rcu_dereference(dev->qp_dev->qp_table[n]); qp; + qp = rcu_dereference(qp->next)) + if (qp->ibqp.qp_num == qpn) + break; + } + return qp; +} + +/** + * hfi1_error_qp - put a QP into the error state + * @qp: the QP to put into the error state + * @err: the receive completion error to signal if a RWQE is active + * + * Flushes both send and receive work queues. + * Returns true if last WQE event should be generated. + * The QP r_lock and s_lock should be held and interrupts disabled. + * If we are already in error state, just return. + */ +int hfi1_error_qp(struct hfi1_qp *qp, enum ib_wc_status err); + +/** + * hfi1_modify_qp - modify the attributes of a queue pair + * @ibqp: the queue pair who's attributes we're modifying + * @attr: the new attributes + * @attr_mask: the mask of attributes to modify + * @udata: user data for libibverbs.so + * + * Returns 0 on success, otherwise returns an errno. + */ +int hfi1_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_udata *udata); + +int hfi1_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_qp_init_attr *init_attr); + +/** + * hfi1_compute_aeth - compute the AETH (syndrome + MSN) + * @qp: the queue pair to compute the AETH for + * + * Returns the AETH. + */ +__be32 hfi1_compute_aeth(struct hfi1_qp *qp); + +/** + * hfi1_create_qp - create a queue pair for a device + * @ibpd: the protection domain who's device we create the queue pair for + * @init_attr: the attributes of the queue pair + * @udata: user data for libibverbs.so + * + * Returns the queue pair on success, otherwise returns an errno. + * + * Called by the ib_create_qp() core verbs function. + */ +struct ib_qp *hfi1_create_qp(struct ib_pd *ibpd, + struct ib_qp_init_attr *init_attr, + struct ib_udata *udata); +/** + * hfi1_destroy_qp - destroy a queue pair + * @ibqp: the queue pair to destroy + * + * Returns 0 on success. + * + * Note that this can be called while the QP is actively sending or + * receiving! + */ +int hfi1_destroy_qp(struct ib_qp *ibqp); + +/** + * hfi1_get_credit - flush the send work queue of a QP + * @qp: the qp who's send work queue to flush + * @aeth: the Acknowledge Extended Transport Header + * + * The QP s_lock should be held. + */ +void hfi1_get_credit(struct hfi1_qp *qp, u32 aeth); + +/** + * hfi1_qp_init - allocate QP tables + * @dev: a pointer to the hfi1_ibdev + */ +int hfi1_qp_init(struct hfi1_ibdev *dev); + +/** + * hfi1_qp_exit - free the QP related structures + * @dev: a pointer to the hfi1_ibdev + */ +void hfi1_qp_exit(struct hfi1_ibdev *dev); + +/** + * hfi1_qp_waitup - wake up on the indicated event + * @qp: the QP + * @flag: flag the qp on which the qp is stalled + */ +void hfi1_qp_wakeup(struct hfi1_qp *qp, u32 flag); + +struct sdma_engine *qp_to_sdma_engine(struct hfi1_qp *qp, u8 sc5); + +struct qp_iter; + +/** + * qp_iter_init - wake up on the indicated event + * @dev: the hfi1_ibdev + */ +struct qp_iter *qp_iter_init(struct hfi1_ibdev *dev); + +/** + * qp_iter_next - wakeup on the indicated event + * @iter: the iterator for the qp hash list + */ +int qp_iter_next(struct qp_iter *iter); + +/** + * qp_iter_next - wake up on the indicated event + * @s: the seq_file to emit the qp information on + * @iter: the iterator for the qp hash list + */ +void qp_iter_print(struct seq_file *s, struct qp_iter *iter); + +/** + * qp_comm_est - handle trap with QP established + * @qp: the QP + */ +void qp_comm_est(struct hfi1_qp *qp); + +#endif /* _QP_H */ diff --git a/drivers/staging/rdma/hfi1/qsfp.c b/drivers/staging/rdma/hfi1/qsfp.c new file mode 100644 index 000000000000..3138936157db --- /dev/null +++ b/drivers/staging/rdma/hfi1/qsfp.c @@ -0,0 +1,546 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/vmalloc.h> + +#include "hfi.h" +#include "twsi.h" + +/* + * QSFP support for hfi driver, using "Two Wire Serial Interface" driver + * in twsi.c + */ +#define I2C_MAX_RETRY 4 + +/* + * Unlocked i2c write. Must hold dd->qsfp_i2c_mutex. + */ +static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + int ret, cnt; + u8 *buff = bp; + + /* Make sure TWSI bus is in sane state. */ + ret = hfi1_twsi_reset(dd, target); + if (ret) { + hfi1_dev_porterr(dd, ppd->port, + "I2C interface Reset for write failed\n"); + return -EIO; + } + + cnt = 0; + while (cnt < len) { + int wlen = len - cnt; + + ret = hfi1_twsi_blk_wr(dd, target, i2c_addr, offset, + buff + cnt, wlen); + if (ret) { + /* hfi1_twsi_blk_wr() 1 for error, else 0 */ + return -EIO; + } + offset += wlen; + cnt += wlen; + } + + /* Must wait min 20us between qsfp i2c transactions */ + udelay(20); + + return cnt; +} + +int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, + void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + int ret; + + ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex); + if (!ret) { + ret = __i2c_write(ppd, target, i2c_addr, offset, bp, len); + mutex_unlock(&dd->qsfp_i2c_mutex); + } + + return ret; +} + +/* + * Unlocked i2c read. Must hold dd->qsfp_i2c_mutex. + */ +static int __i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + int ret, cnt, pass = 0; + int stuck = 0; + u8 *buff = bp; + + /* Make sure TWSI bus is in sane state. */ + ret = hfi1_twsi_reset(dd, target); + if (ret) { + hfi1_dev_porterr(dd, ppd->port, + "I2C interface Reset for read failed\n"); + ret = -EIO; + stuck = 1; + goto exit; + } + + cnt = 0; + while (cnt < len) { + int rlen = len - cnt; + + ret = hfi1_twsi_blk_rd(dd, target, i2c_addr, offset, + buff + cnt, rlen); + /* Some QSFP's fail first try. Retry as experiment */ + if (ret && cnt == 0 && ++pass < I2C_MAX_RETRY) + continue; + if (ret) { + /* hfi1_twsi_blk_rd() 1 for error, else 0 */ + ret = -EIO; + goto exit; + } + offset += rlen; + cnt += rlen; + } + + ret = cnt; + +exit: + if (stuck) + dd_dev_err(dd, "I2C interface bus stuck non-idle\n"); + + if (pass >= I2C_MAX_RETRY && ret) + hfi1_dev_porterr(dd, ppd->port, + "I2C failed even retrying\n"); + else if (pass) + hfi1_dev_porterr(dd, ppd->port, "I2C retries: %d\n", pass); + + /* Must wait min 20us between qsfp i2c transactions */ + udelay(20); + + return ret; +} + +int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, + void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + int ret; + + ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex); + if (!ret) { + ret = __i2c_read(ppd, target, i2c_addr, offset, bp, len); + mutex_unlock(&dd->qsfp_i2c_mutex); + } + + return ret; +} + +int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + int count = 0; + int offset; + int nwrite; + int ret; + u8 page; + + ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex); + if (ret) + return ret; + + while (count < len) { + /* + * Set the qsfp page based on a zero-based addresss + * and a page size of QSFP_PAGESIZE bytes. + */ + page = (u8)(addr / QSFP_PAGESIZE); + + ret = __i2c_write(ppd, target, QSFP_DEV, + QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); + if (ret != 1) { + hfi1_dev_porterr( + ppd->dd, + ppd->port, + "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret); + ret = -EIO; + break; + } + + /* truncate write to end of page if crossing page boundary */ + offset = addr % QSFP_PAGESIZE; + nwrite = len - count; + if ((offset + nwrite) > QSFP_PAGESIZE) + nwrite = QSFP_PAGESIZE - offset; + + ret = __i2c_write(ppd, target, QSFP_DEV, offset, bp + count, + nwrite); + if (ret <= 0) /* stop on error or nothing read */ + break; + + count += ret; + addr += ret; + } + + mutex_unlock(&ppd->dd->qsfp_i2c_mutex); + + if (ret < 0) + return ret; + return count; +} + +int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + int count = 0; + int offset; + int nread; + int ret; + u8 page; + + ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex); + if (ret) + return ret; + + while (count < len) { + /* + * Set the qsfp page based on a zero-based address + * and a page size of QSFP_PAGESIZE bytes. + */ + page = (u8)(addr / QSFP_PAGESIZE); + ret = __i2c_write(ppd, target, QSFP_DEV, + QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); + if (ret != 1) { + hfi1_dev_porterr( + ppd->dd, + ppd->port, + "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret); + ret = -EIO; + break; + } + + /* truncate read to end of page if crossing page boundary */ + offset = addr % QSFP_PAGESIZE; + nread = len - count; + if ((offset + nread) > QSFP_PAGESIZE) + nread = QSFP_PAGESIZE - offset; + + ret = __i2c_read(ppd, target, QSFP_DEV, offset, bp + count, + nread); + if (ret <= 0) /* stop on error or nothing read */ + break; + + count += ret; + addr += ret; + } + + mutex_unlock(&ppd->dd->qsfp_i2c_mutex); + + if (ret < 0) + return ret; + return count; +} + +/* + * This function caches the QSFP memory range in 128 byte chunks. + * As an example, the next byte after address 255 is byte 128 from + * upper page 01H (if existing) rather than byte 0 from lower page 00H. + */ +int refresh_qsfp_cache(struct hfi1_pportdata *ppd, struct qsfp_data *cp) +{ + u32 target = ppd->dd->hfi1_id; + int ret; + unsigned long flags; + u8 *cache = &cp->cache[0]; + + /* ensure sane contents on invalid reads, for cable swaps */ + memset(cache, 0, (QSFP_MAX_NUM_PAGES*128)); + dd_dev_info(ppd->dd, "%s: called\n", __func__); + if (!qsfp_mod_present(ppd)) { + ret = -ENODEV; + goto bail; + } + + ret = qsfp_read(ppd, target, 0, cache, 256); + if (ret != 256) { + dd_dev_info(ppd->dd, + "%s: Read of pages 00H failed, expected 256, got %d\n", + __func__, ret); + goto bail; + } + + if (cache[0] != 0x0C && cache[0] != 0x0D) + goto bail; + + /* Is paging enabled? */ + if (!(cache[2] & 4)) { + + /* Paging enabled, page 03 required */ + if ((cache[195] & 0xC0) == 0xC0) { + /* all */ + ret = qsfp_read(ppd, target, 384, cache + 256, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 640, cache + 384, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + } else if ((cache[195] & 0x80) == 0x80) { + /* only page 2 and 3 */ + ret = qsfp_read(ppd, target, 640, cache + 384, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + } else if ((cache[195] & 0x40) == 0x40) { + /* only page 1 and 3 */ + ret = qsfp_read(ppd, target, 384, cache + 256, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + } else { + /* only page 3 */ + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s: failed\n", __func__); + goto bail; + } + } + } + + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.cache_valid = 1; + ppd->qsfp_info.cache_refresh_required = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); + + return 0; + +bail: + memset(cache, 0, (QSFP_MAX_NUM_PAGES*128)); + return ret; +} + +const char * const hfi1_qsfp_devtech[16] = { + "850nm VCSEL", "1310nm VCSEL", "1550nm VCSEL", "1310nm FP", + "1310nm DFB", "1550nm DFB", "1310nm EML", "1550nm EML", + "Cu Misc", "1490nm DFB", "Cu NoEq", "Cu Eq", + "Undef", "Cu Active BothEq", "Cu FarEq", "Cu NearEq" +}; + +#define QSFP_DUMP_CHUNK 16 /* Holds longest string */ +#define QSFP_DEFAULT_HDR_CNT 224 + +static const char *pwr_codes = "1.5W2.0W2.5W3.5W"; + +int qsfp_mod_present(struct hfi1_pportdata *ppd) +{ + if (HFI1_CAP_IS_KSET(QSFP_ENABLED)) { + struct hfi1_devdata *dd = ppd->dd; + u64 reg; + + reg = read_csr(dd, + dd->hfi1_id ? ASIC_QSFP2_IN : ASIC_QSFP1_IN); + return !(reg & QSFP_HFI0_MODPRST_N); + } + /* always return cable present */ + return 1; +} + +/* + * This function maps QSFP memory addresses in 128 byte chunks in the following + * fashion per the CableInfo SMA query definition in the IBA 1.3 spec/OPA Gen 1 + * spec + * For addr 000-127, lower page 00h + * For addr 128-255, upper page 00h + * For addr 256-383, upper page 01h + * For addr 384-511, upper page 02h + * For addr 512-639, upper page 03h + * + * For addresses beyond this range, it returns the invalid range of data buffer + * set to 0. + * For upper pages that are optional, if they are not valid, returns the + * particular range of bytes in the data buffer set to 0. + */ +int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len, + u8 *data) +{ + struct hfi1_pportdata *ppd; + u32 excess_len = 0; + int ret = 0; + + if (port_num > dd->num_pports || port_num < 1) { + dd_dev_info(dd, "%s: Invalid port number %d\n", + __func__, port_num); + ret = -EINVAL; + goto set_zeroes; + } + + ppd = dd->pport + (port_num - 1); + if (!qsfp_mod_present(ppd)) { + ret = -ENODEV; + goto set_zeroes; + } + + if (!ppd->qsfp_info.cache_valid) { + ret = -EINVAL; + goto set_zeroes; + } + + if (addr >= (QSFP_MAX_NUM_PAGES * 128)) { + ret = -ERANGE; + goto set_zeroes; + } + + if ((addr + len) > (QSFP_MAX_NUM_PAGES * 128)) { + excess_len = (addr + len) - (QSFP_MAX_NUM_PAGES * 128); + memcpy(data, &ppd->qsfp_info.cache[addr], (len - excess_len)); + data += (len - excess_len); + goto set_zeroes; + } + + memcpy(data, &ppd->qsfp_info.cache[addr], len); + return 0; + +set_zeroes: + memset(data, 0, excess_len); + return ret; +} + +int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len) +{ + u8 *cache = &ppd->qsfp_info.cache[0]; + u8 bin_buff[QSFP_DUMP_CHUNK]; + char lenstr[6]; + int sofar, ret; + int bidx = 0; + u8 *atten = &cache[QSFP_ATTEN_OFFS]; + u8 *vendor_oui = &cache[QSFP_VOUI_OFFS]; + + sofar = 0; + lenstr[0] = ' '; + lenstr[1] = '\0'; + + if (ppd->qsfp_info.cache_valid) { + + if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) + sprintf(lenstr, "%dM ", cache[QSFP_MOD_LEN_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", + pwr_codes + + (QSFP_PWR(cache[QSFP_MOD_PWR_OFFS]) * 4)); + + sofar += scnprintf(buf + sofar, len - sofar, "TECH:%s%s\n", + lenstr, + hfi1_qsfp_devtech[(cache[QSFP_MOD_TECH_OFFS]) >> 4]); + + sofar += scnprintf(buf + sofar, len - sofar, "Vendor:%.*s\n", + QSFP_VEND_LEN, &cache[QSFP_VEND_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "OUI:%06X\n", + QSFP_OUI(vendor_oui)); + + sofar += scnprintf(buf + sofar, len - sofar, "Part#:%.*s\n", + QSFP_PN_LEN, &cache[QSFP_PN_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Rev:%.*s\n", + QSFP_REV_LEN, &cache[QSFP_REV_OFFS]); + + if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) + sofar += scnprintf(buf + sofar, len - sofar, + "Atten:%d, %d\n", + QSFP_ATTEN_SDR(atten), + QSFP_ATTEN_DDR(atten)); + + sofar += scnprintf(buf + sofar, len - sofar, "Serial:%.*s\n", + QSFP_SN_LEN, &cache[QSFP_SN_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Date:%.*s\n", + QSFP_DATE_LEN, &cache[QSFP_DATE_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Lot:%.*s\n", + QSFP_LOT_LEN, &cache[QSFP_LOT_OFFS]); + + while (bidx < QSFP_DEFAULT_HDR_CNT) { + int iidx; + + memcpy(bin_buff, &cache[bidx], QSFP_DUMP_CHUNK); + for (iidx = 0; iidx < QSFP_DUMP_CHUNK; ++iidx) { + sofar += scnprintf(buf + sofar, len-sofar, + " %02X", bin_buff[iidx]); + } + sofar += scnprintf(buf + sofar, len - sofar, "\n"); + bidx += QSFP_DUMP_CHUNK; + } + } + ret = sofar; + return ret; +} diff --git a/drivers/staging/rdma/hfi1/qsfp.h b/drivers/staging/rdma/hfi1/qsfp.h new file mode 100644 index 000000000000..d30c2a6baa0b --- /dev/null +++ b/drivers/staging/rdma/hfi1/qsfp.h @@ -0,0 +1,222 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/* QSFP support common definitions, for hfi driver */ + +#define QSFP_DEV 0xA0 +#define QSFP_PWR_LAG_MSEC 2000 +#define QSFP_MODPRS_LAG_MSEC 20 +/* 128 byte pages, per SFF 8636 rev 2.4 */ +#define QSFP_MAX_NUM_PAGES 5 + +/* + * Below are masks for QSFP pins. Pins are the same for HFI0 and HFI1. + * _N means asserted low + */ +#define QSFP_HFI0_I2CCLK (1 << 0) +#define QSFP_HFI0_I2CDAT (1 << 1) +#define QSFP_HFI0_RESET_N (1 << 2) +#define QSFP_HFI0_INT_N (1 << 3) +#define QSFP_HFI0_MODPRST_N (1 << 4) + +/* QSFP is paged at 256 bytes */ +#define QSFP_PAGESIZE 256 + +/* Defined fields that Intel requires of qualified cables */ +/* Byte 0 is Identifier, not checked */ +/* Byte 1 is reserved "status MSB" */ +/* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */ +/* + * Rest of first 128 not used, although 127 is reserved for page select + * if module is not "Flat memory". + */ +#define QSFP_PAGE_SELECT_BYTE_OFFS 127 +/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */ +#define QSFP_MOD_ID_OFFS 128 +/* + * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class + * 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W + */ +#define QSFP_MOD_PWR_OFFS 129 +/* Byte 130 is Connector type. Not Intel req'd */ +/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */ +/* Byte 139 is encoding. code 0x01 is 8b10b. Not Intel req'd */ +/* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not Intel req'd */ +/* Byte 141 is Extended Rate Select. Not Intel req'd */ +/* Bytes 142..145 are lengths for various fiber types. Not Intel req'd */ +/* Byte 146 is length for Copper. Units of 1 meter */ +#define QSFP_MOD_LEN_OFFS 146 +/* + * Byte 147 is Device technology. D0..3 not Intel req'd + * D4..7 select from 15 choices, translated by table: + */ +#define QSFP_MOD_TECH_OFFS 147 +extern const char *const hfi1_qsfp_devtech[16]; +/* Active Equalization includes fiber, copper full EQ, and copper near Eq */ +#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1) +/* Active Equalization includes fiber, copper full EQ, and copper far Eq */ +#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1) +/* Attenuation should be valid for copper other than full/near Eq */ +#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1) +/* Length is only valid if technology is "copper" */ +#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1) +#define QSFP_TECH_1490 9 + +#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \ + oui[2]) +#define QSFP_OUI_AMPHENOL 0x415048 +#define QSFP_OUI_FINISAR 0x009065 +#define QSFP_OUI_GORE 0x002177 + +/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */ +#define QSFP_VEND_OFFS 148 +#define QSFP_VEND_LEN 16 +/* Byte 164 is IB Extended transceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */ +#define QSFP_IBXCV_OFFS 164 +/* Bytes 165..167 are Vendor OUI number */ +#define QSFP_VOUI_OFFS 165 +#define QSFP_VOUI_LEN 3 +/* Bytes 168..183 are Vendor Part Number, string */ +#define QSFP_PN_OFFS 168 +#define QSFP_PN_LEN 16 +/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */ +#define QSFP_REV_OFFS 184 +#define QSFP_REV_LEN 2 +/* + * Bytes 186,187 are Wavelength, if Optical. Not Intel req'd + * If copper, they are attenuation in dB: + * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR) + */ +#define QSFP_ATTEN_OFFS 186 +#define QSFP_ATTEN_LEN 2 +/* Bytes 188,189 are Wavelength tolerance, not Intel req'd */ +/* Byte 190 is Max Case Temp. Not Intel req'd */ +/* Byte 191 is LSB of sum of bytes 128..190. Not Intel req'd */ +#define QSFP_CC_OFFS 191 +/* Bytes 192..195 are Options implemented in qsfp. Not Intel req'd */ +/* Bytes 196..211 are Serial Number, String */ +#define QSFP_SN_OFFS 196 +#define QSFP_SN_LEN 16 +/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */ +#define QSFP_DATE_OFFS 212 +#define QSFP_DATE_LEN 6 +/* Bytes 218,219 are optional lot-code, string */ +#define QSFP_LOT_OFFS 218 +#define QSFP_LOT_LEN 2 +/* Bytes 220, 221 indicate monitoring options, Not Intel req'd */ +/* Byte 223 is LSB of sum of bytes 192..222 */ +#define QSFP_CC_EXT_OFFS 223 + +/* + * Interrupt flag masks + */ +#define QSFP_DATA_NOT_READY 0x01 + +#define QSFP_HIGH_TEMP_ALARM 0x80 +#define QSFP_LOW_TEMP_ALARM 0x40 +#define QSFP_HIGH_TEMP_WARNING 0x20 +#define QSFP_LOW_TEMP_WARNING 0x10 + +#define QSFP_HIGH_VCC_ALARM 0x80 +#define QSFP_LOW_VCC_ALARM 0x40 +#define QSFP_HIGH_VCC_WARNING 0x20 +#define QSFP_LOW_VCC_WARNING 0x10 + +#define QSFP_HIGH_POWER_ALARM 0x88 +#define QSFP_LOW_POWER_ALARM 0x44 +#define QSFP_HIGH_POWER_WARNING 0x22 +#define QSFP_LOW_POWER_WARNING 0x11 + +#define QSFP_HIGH_BIAS_ALARM 0x88 +#define QSFP_LOW_BIAS_ALARM 0x44 +#define QSFP_HIGH_BIAS_WARNING 0x22 +#define QSFP_LOW_BIAS_WARNING 0x11 + +/* + * struct qsfp_data encapsulates state of QSFP device for one port. + * it will be part of port-specific data if a board supports QSFP. + * + * Since multiple board-types use QSFP, and their pport_data structs + * differ (in the chip-specific section), we need a pointer to its head. + * + * Avoiding premature optimization, we will have one work_struct per port, + * and let the qsfp_lock arbitrate access to common resources. + * + */ + +#define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3) +#define QSFP_ATTEN_SDR(attenarray) (attenarray[0]) +#define QSFP_ATTEN_DDR(attenarray) (attenarray[1]) + +struct qsfp_data { + /* Helps to find our way */ + struct hfi1_pportdata *ppd; + struct work_struct qsfp_work; + u8 cache[QSFP_MAX_NUM_PAGES*128]; + spinlock_t qsfp_lock; + u8 check_interrupt_flags; + u8 qsfp_interrupt_functional; + u8 cache_valid; + u8 cache_refresh_required; +}; + +int refresh_qsfp_cache(struct hfi1_pportdata *ppd, + struct qsfp_data *cp); +int qsfp_mod_present(struct hfi1_pportdata *ppd); +int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, + u32 len, u8 *data); + +int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len); +int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len); +int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len); +int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len); diff --git a/drivers/staging/rdma/hfi1/rc.c b/drivers/staging/rdma/hfi1/rc.c new file mode 100644 index 000000000000..632dd5ba7dfd --- /dev/null +++ b/drivers/staging/rdma/hfi1/rc.c @@ -0,0 +1,2426 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/io.h> + +#include "hfi.h" +#include "qp.h" +#include "sdma.h" +#include "trace.h" + +/* cut down ridiculously long IB macro names */ +#define OP(x) IB_OPCODE_RC_##x + +static void rc_timeout(unsigned long arg); + +static u32 restart_sge(struct hfi1_sge_state *ss, struct hfi1_swqe *wqe, + u32 psn, u32 pmtu) +{ + u32 len; + + len = delta_psn(psn, wqe->psn) * pmtu; + ss->sge = wqe->sg_list[0]; + ss->sg_list = wqe->sg_list + 1; + ss->num_sge = wqe->wr.num_sge; + ss->total_len = wqe->length; + hfi1_skip_sge(ss, len, 0); + return wqe->length - len; +} + +static void start_timer(struct hfi1_qp *qp) +{ + qp->s_flags |= HFI1_S_TIMER; + qp->s_timer.function = rc_timeout; + /* 4.096 usec. * (1 << qp->timeout) */ + qp->s_timer.expires = jiffies + qp->timeout_jiffies; + add_timer(&qp->s_timer); +} + +/** + * make_rc_ack - construct a response packet (ACK, NAK, or RDMA read) + * @dev: the device for this QP + * @qp: a pointer to the QP + * @ohdr: a pointer to the IB header being constructed + * @pmtu: the path MTU + * + * Return 1 if constructed; otherwise, return 0. + * Note that we are in the responder's side of the QP context. + * Note the QP s_lock must be held. + */ +static int make_rc_ack(struct hfi1_ibdev *dev, struct hfi1_qp *qp, + struct hfi1_other_headers *ohdr, u32 pmtu) +{ + struct hfi1_ack_entry *e; + u32 hwords; + u32 len; + u32 bth0; + u32 bth2; + int middle = 0; + + /* Don't send an ACK if we aren't supposed to. */ + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK)) + goto bail; + + /* header size in 32-bit words LRH+BTH = (8+12)/4. */ + hwords = 5; + + switch (qp->s_ack_state) { + case OP(RDMA_READ_RESPONSE_LAST): + case OP(RDMA_READ_RESPONSE_ONLY): + e = &qp->s_ack_queue[qp->s_tail_ack_queue]; + if (e->rdma_sge.mr) { + hfi1_put_mr(e->rdma_sge.mr); + e->rdma_sge.mr = NULL; + } + /* FALLTHROUGH */ + case OP(ATOMIC_ACKNOWLEDGE): + /* + * We can increment the tail pointer now that the last + * response has been sent instead of only being + * constructed. + */ + if (++qp->s_tail_ack_queue > HFI1_MAX_RDMA_ATOMIC) + qp->s_tail_ack_queue = 0; + /* FALLTHROUGH */ + case OP(SEND_ONLY): + case OP(ACKNOWLEDGE): + /* Check for no next entry in the queue. */ + if (qp->r_head_ack_queue == qp->s_tail_ack_queue) { + if (qp->s_flags & HFI1_S_ACK_PENDING) + goto normal; + goto bail; + } + + e = &qp->s_ack_queue[qp->s_tail_ack_queue]; + if (e->opcode == OP(RDMA_READ_REQUEST)) { + /* + * If a RDMA read response is being resent and + * we haven't seen the duplicate request yet, + * then stop sending the remaining responses the + * responder has seen until the requester re-sends it. + */ + len = e->rdma_sge.sge_length; + if (len && !e->rdma_sge.mr) { + qp->s_tail_ack_queue = qp->r_head_ack_queue; + goto bail; + } + /* Copy SGE state in case we need to resend */ + qp->s_rdma_mr = e->rdma_sge.mr; + if (qp->s_rdma_mr) + hfi1_get_mr(qp->s_rdma_mr); + qp->s_ack_rdma_sge.sge = e->rdma_sge; + qp->s_ack_rdma_sge.num_sge = 1; + qp->s_cur_sge = &qp->s_ack_rdma_sge; + if (len > pmtu) { + len = pmtu; + qp->s_ack_state = OP(RDMA_READ_RESPONSE_FIRST); + } else { + qp->s_ack_state = OP(RDMA_READ_RESPONSE_ONLY); + e->sent = 1; + } + ohdr->u.aeth = hfi1_compute_aeth(qp); + hwords++; + qp->s_ack_rdma_psn = e->psn; + bth2 = mask_psn(qp->s_ack_rdma_psn++); + } else { + /* COMPARE_SWAP or FETCH_ADD */ + qp->s_cur_sge = NULL; + len = 0; + qp->s_ack_state = OP(ATOMIC_ACKNOWLEDGE); + ohdr->u.at.aeth = hfi1_compute_aeth(qp); + ohdr->u.at.atomic_ack_eth[0] = + cpu_to_be32(e->atomic_data >> 32); + ohdr->u.at.atomic_ack_eth[1] = + cpu_to_be32(e->atomic_data); + hwords += sizeof(ohdr->u.at) / sizeof(u32); + bth2 = mask_psn(e->psn); + e->sent = 1; + } + bth0 = qp->s_ack_state << 24; + break; + + case OP(RDMA_READ_RESPONSE_FIRST): + qp->s_ack_state = OP(RDMA_READ_RESPONSE_MIDDLE); + /* FALLTHROUGH */ + case OP(RDMA_READ_RESPONSE_MIDDLE): + qp->s_cur_sge = &qp->s_ack_rdma_sge; + qp->s_rdma_mr = qp->s_ack_rdma_sge.sge.mr; + if (qp->s_rdma_mr) + hfi1_get_mr(qp->s_rdma_mr); + len = qp->s_ack_rdma_sge.sge.sge_length; + if (len > pmtu) { + len = pmtu; + middle = HFI1_CAP_IS_KSET(SDMA_AHG); + } else { + ohdr->u.aeth = hfi1_compute_aeth(qp); + hwords++; + qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST); + e = &qp->s_ack_queue[qp->s_tail_ack_queue]; + e->sent = 1; + } + bth0 = qp->s_ack_state << 24; + bth2 = mask_psn(qp->s_ack_rdma_psn++); + break; + + default: +normal: + /* + * Send a regular ACK. + * Set the s_ack_state so we wait until after sending + * the ACK before setting s_ack_state to ACKNOWLEDGE + * (see above). + */ + qp->s_ack_state = OP(SEND_ONLY); + qp->s_flags &= ~HFI1_S_ACK_PENDING; + qp->s_cur_sge = NULL; + if (qp->s_nak_state) + ohdr->u.aeth = + cpu_to_be32((qp->r_msn & HFI1_MSN_MASK) | + (qp->s_nak_state << + HFI1_AETH_CREDIT_SHIFT)); + else + ohdr->u.aeth = hfi1_compute_aeth(qp); + hwords++; + len = 0; + bth0 = OP(ACKNOWLEDGE) << 24; + bth2 = mask_psn(qp->s_ack_psn); + } + qp->s_rdma_ack_cnt++; + qp->s_hdrwords = hwords; + qp->s_cur_size = len; + hfi1_make_ruc_header(qp, ohdr, bth0, bth2, middle); + return 1; + +bail: + qp->s_ack_state = OP(ACKNOWLEDGE); + /* + * Ensure s_rdma_ack_cnt changes are committed prior to resetting + * HFI1_S_RESP_PENDING + */ + smp_wmb(); + qp->s_flags &= ~(HFI1_S_RESP_PENDING + | HFI1_S_ACK_PENDING + | HFI1_S_AHG_VALID); + return 0; +} + +/** + * hfi1_make_rc_req - construct a request packet (SEND, RDMA r/w, ATOMIC) + * @qp: a pointer to the QP + * + * Return 1 if constructed; otherwise, return 0. + */ +int hfi1_make_rc_req(struct hfi1_qp *qp) +{ + struct hfi1_ibdev *dev = to_idev(qp->ibqp.device); + struct hfi1_other_headers *ohdr; + struct hfi1_sge_state *ss; + struct hfi1_swqe *wqe; + /* header size in 32-bit words LRH+BTH = (8+12)/4. */ + u32 hwords = 5; + u32 len; + u32 bth0 = 0; + u32 bth2; + u32 pmtu = qp->pmtu; + char newreq; + unsigned long flags; + int ret = 0; + int middle = 0; + int delta; + + ohdr = &qp->s_hdr->ibh.u.oth; + if (qp->remote_ah_attr.ah_flags & IB_AH_GRH) + ohdr = &qp->s_hdr->ibh.u.l.oth; + + /* + * The lock is needed to synchronize between the sending tasklet, + * the receive interrupt handler, and timeout re-sends. + */ + spin_lock_irqsave(&qp->s_lock, flags); + + /* Sending responses has higher priority over sending requests. */ + if ((qp->s_flags & HFI1_S_RESP_PENDING) && + make_rc_ack(dev, qp, ohdr, pmtu)) + goto done; + + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_SEND_OK)) { + if (!(ib_hfi1_state_ops[qp->state] & HFI1_FLUSH_SEND)) + goto bail; + /* We are in the error state, flush the work request. */ + if (qp->s_last == qp->s_head) + goto bail; + /* If DMAs are in progress, we can't flush immediately. */ + if (atomic_read(&qp->s_iowait.sdma_busy)) { + qp->s_flags |= HFI1_S_WAIT_DMA; + goto bail; + } + clear_ahg(qp); + wqe = get_swqe_ptr(qp, qp->s_last); + hfi1_send_complete(qp, wqe, qp->s_last != qp->s_acked ? + IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR); + /* will get called again */ + goto done; + } + + if (qp->s_flags & (HFI1_S_WAIT_RNR | HFI1_S_WAIT_ACK)) + goto bail; + + if (cmp_psn(qp->s_psn, qp->s_sending_hpsn) <= 0) { + if (cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) <= 0) { + qp->s_flags |= HFI1_S_WAIT_PSN; + goto bail; + } + qp->s_sending_psn = qp->s_psn; + qp->s_sending_hpsn = qp->s_psn - 1; + } + + /* Send a request. */ + wqe = get_swqe_ptr(qp, qp->s_cur); + switch (qp->s_state) { + default: + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_NEXT_SEND_OK)) + goto bail; + /* + * Resend an old request or start a new one. + * + * We keep track of the current SWQE so that + * we don't reset the "furthest progress" state + * if we need to back up. + */ + newreq = 0; + if (qp->s_cur == qp->s_tail) { + /* Check if send work queue is empty. */ + if (qp->s_tail == qp->s_head) { + clear_ahg(qp); + goto bail; + } + /* + * If a fence is requested, wait for previous + * RDMA read and atomic operations to finish. + */ + if ((wqe->wr.send_flags & IB_SEND_FENCE) && + qp->s_num_rd_atomic) { + qp->s_flags |= HFI1_S_WAIT_FENCE; + goto bail; + } + wqe->psn = qp->s_next_psn; + newreq = 1; + } + /* + * Note that we have to be careful not to modify the + * original work request since we may need to resend + * it. + */ + len = wqe->length; + ss = &qp->s_sge; + bth2 = mask_psn(qp->s_psn); + switch (wqe->wr.opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + /* If no credit, return. */ + if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT) && + cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) { + qp->s_flags |= HFI1_S_WAIT_SSN_CREDIT; + goto bail; + } + wqe->lpsn = wqe->psn; + if (len > pmtu) { + wqe->lpsn += (len - 1) / pmtu; + qp->s_state = OP(SEND_FIRST); + len = pmtu; + break; + } + if (wqe->wr.opcode == IB_WR_SEND) + qp->s_state = OP(SEND_ONLY); + else { + qp->s_state = OP(SEND_ONLY_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + } + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + bth2 |= IB_BTH_REQ_ACK; + if (++qp->s_cur == qp->s_size) + qp->s_cur = 0; + break; + + case IB_WR_RDMA_WRITE: + if (newreq && !(qp->s_flags & HFI1_S_UNLIMITED_CREDIT)) + qp->s_lsn++; + /* FALLTHROUGH */ + case IB_WR_RDMA_WRITE_WITH_IMM: + /* If no credit, return. */ + if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT) && + cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) { + qp->s_flags |= HFI1_S_WAIT_SSN_CREDIT; + goto bail; + } + ohdr->u.rc.reth.vaddr = + cpu_to_be64(wqe->wr.wr.rdma.remote_addr); + ohdr->u.rc.reth.rkey = + cpu_to_be32(wqe->wr.wr.rdma.rkey); + ohdr->u.rc.reth.length = cpu_to_be32(len); + hwords += sizeof(struct ib_reth) / sizeof(u32); + wqe->lpsn = wqe->psn; + if (len > pmtu) { + wqe->lpsn += (len - 1) / pmtu; + qp->s_state = OP(RDMA_WRITE_FIRST); + len = pmtu; + break; + } + if (wqe->wr.opcode == IB_WR_RDMA_WRITE) + qp->s_state = OP(RDMA_WRITE_ONLY); + else { + qp->s_state = + OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE); + /* Immediate data comes after RETH */ + ohdr->u.rc.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + } + bth2 |= IB_BTH_REQ_ACK; + if (++qp->s_cur == qp->s_size) + qp->s_cur = 0; + break; + + case IB_WR_RDMA_READ: + /* + * Don't allow more operations to be started + * than the QP limits allow. + */ + if (newreq) { + if (qp->s_num_rd_atomic >= + qp->s_max_rd_atomic) { + qp->s_flags |= HFI1_S_WAIT_RDMAR; + goto bail; + } + qp->s_num_rd_atomic++; + if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT)) + qp->s_lsn++; + /* + * Adjust s_next_psn to count the + * expected number of responses. + */ + if (len > pmtu) + qp->s_next_psn += (len - 1) / pmtu; + wqe->lpsn = qp->s_next_psn++; + } + ohdr->u.rc.reth.vaddr = + cpu_to_be64(wqe->wr.wr.rdma.remote_addr); + ohdr->u.rc.reth.rkey = + cpu_to_be32(wqe->wr.wr.rdma.rkey); + ohdr->u.rc.reth.length = cpu_to_be32(len); + qp->s_state = OP(RDMA_READ_REQUEST); + hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32); + ss = NULL; + len = 0; + bth2 |= IB_BTH_REQ_ACK; + if (++qp->s_cur == qp->s_size) + qp->s_cur = 0; + break; + + case IB_WR_ATOMIC_CMP_AND_SWP: + case IB_WR_ATOMIC_FETCH_AND_ADD: + /* + * Don't allow more operations to be started + * than the QP limits allow. + */ + if (newreq) { + if (qp->s_num_rd_atomic >= + qp->s_max_rd_atomic) { + qp->s_flags |= HFI1_S_WAIT_RDMAR; + goto bail; + } + qp->s_num_rd_atomic++; + if (!(qp->s_flags & HFI1_S_UNLIMITED_CREDIT)) + qp->s_lsn++; + wqe->lpsn = wqe->psn; + } + if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP) { + qp->s_state = OP(COMPARE_SWAP); + ohdr->u.atomic_eth.swap_data = cpu_to_be64( + wqe->wr.wr.atomic.swap); + ohdr->u.atomic_eth.compare_data = cpu_to_be64( + wqe->wr.wr.atomic.compare_add); + } else { + qp->s_state = OP(FETCH_ADD); + ohdr->u.atomic_eth.swap_data = cpu_to_be64( + wqe->wr.wr.atomic.compare_add); + ohdr->u.atomic_eth.compare_data = 0; + } + ohdr->u.atomic_eth.vaddr[0] = cpu_to_be32( + wqe->wr.wr.atomic.remote_addr >> 32); + ohdr->u.atomic_eth.vaddr[1] = cpu_to_be32( + wqe->wr.wr.atomic.remote_addr); + ohdr->u.atomic_eth.rkey = cpu_to_be32( + wqe->wr.wr.atomic.rkey); + hwords += sizeof(struct ib_atomic_eth) / sizeof(u32); + ss = NULL; + len = 0; + bth2 |= IB_BTH_REQ_ACK; + if (++qp->s_cur == qp->s_size) + qp->s_cur = 0; + break; + + default: + goto bail; + } + qp->s_sge.sge = wqe->sg_list[0]; + qp->s_sge.sg_list = wqe->sg_list + 1; + qp->s_sge.num_sge = wqe->wr.num_sge; + qp->s_sge.total_len = wqe->length; + qp->s_len = wqe->length; + if (newreq) { + qp->s_tail++; + if (qp->s_tail >= qp->s_size) + qp->s_tail = 0; + } + if (wqe->wr.opcode == IB_WR_RDMA_READ) + qp->s_psn = wqe->lpsn + 1; + else { + qp->s_psn++; + if (cmp_psn(qp->s_psn, qp->s_next_psn) > 0) + qp->s_next_psn = qp->s_psn; + } + break; + + case OP(RDMA_READ_RESPONSE_FIRST): + /* + * qp->s_state is normally set to the opcode of the + * last packet constructed for new requests and therefore + * is never set to RDMA read response. + * RDMA_READ_RESPONSE_FIRST is used by the ACK processing + * thread to indicate a SEND needs to be restarted from an + * earlier PSN without interfering with the sending thread. + * See restart_rc(). + */ + qp->s_len = restart_sge(&qp->s_sge, wqe, qp->s_psn, pmtu); + /* FALLTHROUGH */ + case OP(SEND_FIRST): + qp->s_state = OP(SEND_MIDDLE); + /* FALLTHROUGH */ + case OP(SEND_MIDDLE): + bth2 = mask_psn(qp->s_psn++); + if (cmp_psn(qp->s_psn, qp->s_next_psn) > 0) + qp->s_next_psn = qp->s_psn; + ss = &qp->s_sge; + len = qp->s_len; + if (len > pmtu) { + len = pmtu; + middle = HFI1_CAP_IS_KSET(SDMA_AHG); + break; + } + if (wqe->wr.opcode == IB_WR_SEND) + qp->s_state = OP(SEND_LAST); + else { + qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + } + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + bth2 |= IB_BTH_REQ_ACK; + qp->s_cur++; + if (qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + + case OP(RDMA_READ_RESPONSE_LAST): + /* + * qp->s_state is normally set to the opcode of the + * last packet constructed for new requests and therefore + * is never set to RDMA read response. + * RDMA_READ_RESPONSE_LAST is used by the ACK processing + * thread to indicate a RDMA write needs to be restarted from + * an earlier PSN without interfering with the sending thread. + * See restart_rc(). + */ + qp->s_len = restart_sge(&qp->s_sge, wqe, qp->s_psn, pmtu); + /* FALLTHROUGH */ + case OP(RDMA_WRITE_FIRST): + qp->s_state = OP(RDMA_WRITE_MIDDLE); + /* FALLTHROUGH */ + case OP(RDMA_WRITE_MIDDLE): + bth2 = mask_psn(qp->s_psn++); + if (cmp_psn(qp->s_psn, qp->s_next_psn) > 0) + qp->s_next_psn = qp->s_psn; + ss = &qp->s_sge; + len = qp->s_len; + if (len > pmtu) { + len = pmtu; + middle = HFI1_CAP_IS_KSET(SDMA_AHG); + break; + } + if (wqe->wr.opcode == IB_WR_RDMA_WRITE) + qp->s_state = OP(RDMA_WRITE_LAST); + else { + qp->s_state = OP(RDMA_WRITE_LAST_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + } + bth2 |= IB_BTH_REQ_ACK; + qp->s_cur++; + if (qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + + case OP(RDMA_READ_RESPONSE_MIDDLE): + /* + * qp->s_state is normally set to the opcode of the + * last packet constructed for new requests and therefore + * is never set to RDMA read response. + * RDMA_READ_RESPONSE_MIDDLE is used by the ACK processing + * thread to indicate a RDMA read needs to be restarted from + * an earlier PSN without interfering with the sending thread. + * See restart_rc(). + */ + len = (delta_psn(qp->s_psn, wqe->psn)) * pmtu; + ohdr->u.rc.reth.vaddr = + cpu_to_be64(wqe->wr.wr.rdma.remote_addr + len); + ohdr->u.rc.reth.rkey = + cpu_to_be32(wqe->wr.wr.rdma.rkey); + ohdr->u.rc.reth.length = cpu_to_be32(wqe->length - len); + qp->s_state = OP(RDMA_READ_REQUEST); + hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32); + bth2 = mask_psn(qp->s_psn) | IB_BTH_REQ_ACK; + qp->s_psn = wqe->lpsn + 1; + ss = NULL; + len = 0; + qp->s_cur++; + if (qp->s_cur == qp->s_size) + qp->s_cur = 0; + break; + } + qp->s_sending_hpsn = bth2; + delta = delta_psn(bth2, wqe->psn); + if (delta && delta % HFI1_PSN_CREDIT == 0) + bth2 |= IB_BTH_REQ_ACK; + if (qp->s_flags & HFI1_S_SEND_ONE) { + qp->s_flags &= ~HFI1_S_SEND_ONE; + qp->s_flags |= HFI1_S_WAIT_ACK; + bth2 |= IB_BTH_REQ_ACK; + } + qp->s_len -= len; + qp->s_hdrwords = hwords; + qp->s_cur_sge = ss; + qp->s_cur_size = len; + hfi1_make_ruc_header( + qp, + ohdr, + bth0 | (qp->s_state << 24), + bth2, + middle); +done: + ret = 1; + goto unlock; + +bail: + qp->s_flags &= ~HFI1_S_BUSY; +unlock: + spin_unlock_irqrestore(&qp->s_lock, flags); + return ret; +} + +/** + * hfi1_send_rc_ack - Construct an ACK packet and send it + * @qp: a pointer to the QP + * + * This is called from hfi1_rc_rcv() and handle_receive_interrupt(). + * Note that RDMA reads and atomics are handled in the + * send side QP state and tasklet. + */ +void hfi1_send_rc_ack(struct hfi1_ctxtdata *rcd, struct hfi1_qp *qp, + int is_fecn) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u64 pbc, pbc_flags = 0; + u16 lrh0; + u16 sc5; + u32 bth0; + u32 hwords; + u32 vl, plen; + struct send_context *sc; + struct pio_buf *pbuf; + struct hfi1_ib_header hdr; + struct hfi1_other_headers *ohdr; + + /* Don't send ACK or NAK if a RDMA read or atomic is pending. */ + if (qp->s_flags & HFI1_S_RESP_PENDING) + goto queue_ack; + + /* Ensure s_rdma_ack_cnt changes are committed */ + smp_read_barrier_depends(); + if (qp->s_rdma_ack_cnt) + goto queue_ack; + + /* Construct the header */ + /* header size in 32-bit words LRH+BTH+AETH = (8+12+4)/4 */ + hwords = 6; + if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) { + hwords += hfi1_make_grh(ibp, &hdr.u.l.grh, + &qp->remote_ah_attr.grh, hwords, 0); + ohdr = &hdr.u.l.oth; + lrh0 = HFI1_LRH_GRH; + } else { + ohdr = &hdr.u.oth; + lrh0 = HFI1_LRH_BTH; + } + /* read pkey_index w/o lock (its atomic) */ + bth0 = hfi1_get_pkey(ibp, qp->s_pkey_index) | (OP(ACKNOWLEDGE) << 24); + if (qp->s_mig_state == IB_MIG_MIGRATED) + bth0 |= IB_BTH_MIG_REQ; + if (qp->r_nak_state) + ohdr->u.aeth = cpu_to_be32((qp->r_msn & HFI1_MSN_MASK) | + (qp->r_nak_state << + HFI1_AETH_CREDIT_SHIFT)); + else + ohdr->u.aeth = hfi1_compute_aeth(qp); + sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + /* set PBC_DC_INFO bit (aka SC[4]) in pbc_flags */ + pbc_flags |= ((!!(sc5 & 0x10)) << PBC_DC_INFO_SHIFT); + lrh0 |= (sc5 & 0xf) << 12 | (qp->remote_ah_attr.sl & 0xf) << 4; + hdr.lrh[0] = cpu_to_be16(lrh0); + hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid); + hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC); + hdr.lrh[3] = cpu_to_be16(ppd->lid | qp->remote_ah_attr.src_path_bits); + ohdr->bth[0] = cpu_to_be32(bth0); + ohdr->bth[1] = cpu_to_be32(qp->remote_qpn); + ohdr->bth[1] |= cpu_to_be32((!!is_fecn) << HFI1_BECN_SHIFT); + ohdr->bth[2] = cpu_to_be32(mask_psn(qp->r_ack_psn)); + + /* Don't try to send ACKs if the link isn't ACTIVE */ + if (driver_lstate(ppd) != IB_PORT_ACTIVE) + return; + + sc = rcd->sc; + plen = 2 /* PBC */ + hwords; + vl = sc_to_vlt(ppd->dd, sc5); + pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); + + pbuf = sc_buffer_alloc(sc, plen, NULL, NULL); + if (!pbuf) { + /* + * We have no room to send at the moment. Pass + * responsibility for sending the ACK to the send tasklet + * so that when enough buffer space becomes available, + * the ACK is sent ahead of other outgoing packets. + */ + goto queue_ack; + } + + trace_output_ibhdr(dd_from_ibdev(qp->ibqp.device), &hdr); + + /* write the pbc and data */ + ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, &hdr, hwords); + + return; + +queue_ack: + this_cpu_inc(*ibp->rc_qacks); + spin_lock(&qp->s_lock); + qp->s_flags |= HFI1_S_ACK_PENDING | HFI1_S_RESP_PENDING; + qp->s_nak_state = qp->r_nak_state; + qp->s_ack_psn = qp->r_ack_psn; + if (is_fecn) + qp->s_flags |= HFI1_S_ECN; + + /* Schedule the send tasklet. */ + hfi1_schedule_send(qp); + spin_unlock(&qp->s_lock); +} + +/** + * reset_psn - reset the QP state to send starting from PSN + * @qp: the QP + * @psn: the packet sequence number to restart at + * + * This is called from hfi1_rc_rcv() to process an incoming RC ACK + * for the given QP. + * Called at interrupt level with the QP s_lock held. + */ +static void reset_psn(struct hfi1_qp *qp, u32 psn) +{ + u32 n = qp->s_acked; + struct hfi1_swqe *wqe = get_swqe_ptr(qp, n); + u32 opcode; + + qp->s_cur = n; + + /* + * If we are starting the request from the beginning, + * let the normal send code handle initialization. + */ + if (cmp_psn(psn, wqe->psn) <= 0) { + qp->s_state = OP(SEND_LAST); + goto done; + } + + /* Find the work request opcode corresponding to the given PSN. */ + opcode = wqe->wr.opcode; + for (;;) { + int diff; + + if (++n == qp->s_size) + n = 0; + if (n == qp->s_tail) + break; + wqe = get_swqe_ptr(qp, n); + diff = cmp_psn(psn, wqe->psn); + if (diff < 0) + break; + qp->s_cur = n; + /* + * If we are starting the request from the beginning, + * let the normal send code handle initialization. + */ + if (diff == 0) { + qp->s_state = OP(SEND_LAST); + goto done; + } + opcode = wqe->wr.opcode; + } + + /* + * Set the state to restart in the middle of a request. + * Don't change the s_sge, s_cur_sge, or s_cur_size. + * See hfi1_make_rc_req(). + */ + switch (opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + qp->s_state = OP(RDMA_READ_RESPONSE_FIRST); + break; + + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + qp->s_state = OP(RDMA_READ_RESPONSE_LAST); + break; + + case IB_WR_RDMA_READ: + qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE); + break; + + default: + /* + * This case shouldn't happen since its only + * one PSN per req. + */ + qp->s_state = OP(SEND_LAST); + } +done: + qp->s_psn = psn; + /* + * Set HFI1_S_WAIT_PSN as rc_complete() may start the timer + * asynchronously before the send tasklet can get scheduled. + * Doing it in hfi1_make_rc_req() is too late. + */ + if ((cmp_psn(qp->s_psn, qp->s_sending_hpsn) <= 0) && + (cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) <= 0)) + qp->s_flags |= HFI1_S_WAIT_PSN; + qp->s_flags &= ~HFI1_S_AHG_VALID; +} + +/* + * Back up requester to resend the last un-ACKed request. + * The QP r_lock and s_lock should be held and interrupts disabled. + */ +static void restart_rc(struct hfi1_qp *qp, u32 psn, int wait) +{ + struct hfi1_swqe *wqe = get_swqe_ptr(qp, qp->s_acked); + struct hfi1_ibport *ibp; + + if (qp->s_retry == 0) { + if (qp->s_mig_state == IB_MIG_ARMED) { + hfi1_migrate_qp(qp); + qp->s_retry = qp->s_retry_cnt; + } else if (qp->s_last == qp->s_acked) { + hfi1_send_complete(qp, wqe, IB_WC_RETRY_EXC_ERR); + hfi1_error_qp(qp, IB_WC_WR_FLUSH_ERR); + return; + } else /* need to handle delayed completion */ + return; + } else + qp->s_retry--; + + ibp = to_iport(qp->ibqp.device, qp->port_num); + if (wqe->wr.opcode == IB_WR_RDMA_READ) + ibp->n_rc_resends++; + else + ibp->n_rc_resends += delta_psn(qp->s_psn, psn); + + qp->s_flags &= ~(HFI1_S_WAIT_FENCE | HFI1_S_WAIT_RDMAR | + HFI1_S_WAIT_SSN_CREDIT | HFI1_S_WAIT_PSN | + HFI1_S_WAIT_ACK); + if (wait) + qp->s_flags |= HFI1_S_SEND_ONE; + reset_psn(qp, psn); +} + +/* + * This is called from s_timer for missing responses. + */ +static void rc_timeout(unsigned long arg) +{ + struct hfi1_qp *qp = (struct hfi1_qp *)arg; + struct hfi1_ibport *ibp; + unsigned long flags; + + spin_lock_irqsave(&qp->r_lock, flags); + spin_lock(&qp->s_lock); + if (qp->s_flags & HFI1_S_TIMER) { + ibp = to_iport(qp->ibqp.device, qp->port_num); + ibp->n_rc_timeouts++; + qp->s_flags &= ~HFI1_S_TIMER; + del_timer(&qp->s_timer); + restart_rc(qp, qp->s_last_psn + 1, 1); + hfi1_schedule_send(qp); + } + spin_unlock(&qp->s_lock); + spin_unlock_irqrestore(&qp->r_lock, flags); +} + +/* + * This is called from s_timer for RNR timeouts. + */ +void hfi1_rc_rnr_retry(unsigned long arg) +{ + struct hfi1_qp *qp = (struct hfi1_qp *)arg; + unsigned long flags; + + spin_lock_irqsave(&qp->s_lock, flags); + if (qp->s_flags & HFI1_S_WAIT_RNR) { + qp->s_flags &= ~HFI1_S_WAIT_RNR; + del_timer(&qp->s_timer); + hfi1_schedule_send(qp); + } + spin_unlock_irqrestore(&qp->s_lock, flags); +} + +/* + * Set qp->s_sending_psn to the next PSN after the given one. + * This would be psn+1 except when RDMA reads are present. + */ +static void reset_sending_psn(struct hfi1_qp *qp, u32 psn) +{ + struct hfi1_swqe *wqe; + u32 n = qp->s_last; + + /* Find the work request corresponding to the given PSN. */ + for (;;) { + wqe = get_swqe_ptr(qp, n); + if (cmp_psn(psn, wqe->lpsn) <= 0) { + if (wqe->wr.opcode == IB_WR_RDMA_READ) + qp->s_sending_psn = wqe->lpsn + 1; + else + qp->s_sending_psn = psn + 1; + break; + } + if (++n == qp->s_size) + n = 0; + if (n == qp->s_tail) + break; + } +} + +/* + * This should be called with the QP s_lock held and interrupts disabled. + */ +void hfi1_rc_send_complete(struct hfi1_qp *qp, struct hfi1_ib_header *hdr) +{ + struct hfi1_other_headers *ohdr; + struct hfi1_swqe *wqe; + struct ib_wc wc; + unsigned i; + u32 opcode; + u32 psn; + + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_OR_FLUSH_SEND)) + return; + + /* Find out where the BTH is */ + if ((be16_to_cpu(hdr->lrh[0]) & 3) == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else + ohdr = &hdr->u.l.oth; + + opcode = be32_to_cpu(ohdr->bth[0]) >> 24; + if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) && + opcode <= OP(ATOMIC_ACKNOWLEDGE)) { + WARN_ON(!qp->s_rdma_ack_cnt); + qp->s_rdma_ack_cnt--; + return; + } + + psn = be32_to_cpu(ohdr->bth[2]); + reset_sending_psn(qp, psn); + + /* + * Start timer after a packet requesting an ACK has been sent and + * there are still requests that haven't been acked. + */ + if ((psn & IB_BTH_REQ_ACK) && qp->s_acked != qp->s_tail && + !(qp->s_flags & + (HFI1_S_TIMER | HFI1_S_WAIT_RNR | HFI1_S_WAIT_PSN)) && + (ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK)) + start_timer(qp); + + while (qp->s_last != qp->s_acked) { + wqe = get_swqe_ptr(qp, qp->s_last); + if (cmp_psn(wqe->lpsn, qp->s_sending_psn) >= 0 && + cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) <= 0) + break; + for (i = 0; i < wqe->wr.num_sge; i++) { + struct hfi1_sge *sge = &wqe->sg_list[i]; + + hfi1_put_mr(sge->mr); + } + /* Post a send completion queue entry if requested. */ + if (!(qp->s_flags & HFI1_S_SIGNAL_REQ_WR) || + (wqe->wr.send_flags & IB_SEND_SIGNALED)) { + memset(&wc, 0, sizeof(wc)); + wc.wr_id = wqe->wr.wr_id; + wc.status = IB_WC_SUCCESS; + wc.opcode = ib_hfi1_wc_opcode[wqe->wr.opcode]; + wc.byte_len = wqe->length; + wc.qp = &qp->ibqp; + hfi1_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0); + } + if (++qp->s_last >= qp->s_size) + qp->s_last = 0; + } + /* + * If we were waiting for sends to complete before re-sending, + * and they are now complete, restart sending. + */ + trace_hfi1_rc_sendcomplete(qp, psn); + if (qp->s_flags & HFI1_S_WAIT_PSN && + cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) > 0) { + qp->s_flags &= ~HFI1_S_WAIT_PSN; + qp->s_sending_psn = qp->s_psn; + qp->s_sending_hpsn = qp->s_psn - 1; + hfi1_schedule_send(qp); + } +} + +static inline void update_last_psn(struct hfi1_qp *qp, u32 psn) +{ + qp->s_last_psn = psn; +} + +/* + * Generate a SWQE completion. + * This is similar to hfi1_send_complete but has to check to be sure + * that the SGEs are not being referenced if the SWQE is being resent. + */ +static struct hfi1_swqe *do_rc_completion(struct hfi1_qp *qp, + struct hfi1_swqe *wqe, + struct hfi1_ibport *ibp) +{ + struct ib_wc wc; + unsigned i; + + /* + * Don't decrement refcount and don't generate a + * completion if the SWQE is being resent until the send + * is finished. + */ + if (cmp_psn(wqe->lpsn, qp->s_sending_psn) < 0 || + cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) > 0) { + for (i = 0; i < wqe->wr.num_sge; i++) { + struct hfi1_sge *sge = &wqe->sg_list[i]; + + hfi1_put_mr(sge->mr); + } + /* Post a send completion queue entry if requested. */ + if (!(qp->s_flags & HFI1_S_SIGNAL_REQ_WR) || + (wqe->wr.send_flags & IB_SEND_SIGNALED)) { + memset(&wc, 0, sizeof(wc)); + wc.wr_id = wqe->wr.wr_id; + wc.status = IB_WC_SUCCESS; + wc.opcode = ib_hfi1_wc_opcode[wqe->wr.opcode]; + wc.byte_len = wqe->length; + wc.qp = &qp->ibqp; + hfi1_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0); + } + if (++qp->s_last >= qp->s_size) + qp->s_last = 0; + } else { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + this_cpu_inc(*ibp->rc_delayed_comp); + /* + * If send progress not running attempt to progress + * SDMA queue. + */ + if (ppd->dd->flags & HFI1_HAS_SEND_DMA) { + struct sdma_engine *engine; + u8 sc5; + + /* For now use sc to find engine */ + sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + engine = qp_to_sdma_engine(qp, sc5); + sdma_engine_progress_schedule(engine); + } + } + + qp->s_retry = qp->s_retry_cnt; + update_last_psn(qp, wqe->lpsn); + + /* + * If we are completing a request which is in the process of + * being resent, we can stop re-sending it since we know the + * responder has already seen it. + */ + if (qp->s_acked == qp->s_cur) { + if (++qp->s_cur >= qp->s_size) + qp->s_cur = 0; + qp->s_acked = qp->s_cur; + wqe = get_swqe_ptr(qp, qp->s_cur); + if (qp->s_acked != qp->s_tail) { + qp->s_state = OP(SEND_LAST); + qp->s_psn = wqe->psn; + } + } else { + if (++qp->s_acked >= qp->s_size) + qp->s_acked = 0; + if (qp->state == IB_QPS_SQD && qp->s_acked == qp->s_cur) + qp->s_draining = 0; + wqe = get_swqe_ptr(qp, qp->s_acked); + } + return wqe; +} + +/** + * do_rc_ack - process an incoming RC ACK + * @qp: the QP the ACK came in on + * @psn: the packet sequence number of the ACK + * @opcode: the opcode of the request that resulted in the ACK + * + * This is called from rc_rcv_resp() to process an incoming RC ACK + * for the given QP. + * Called at interrupt level with the QP s_lock held. + * Returns 1 if OK, 0 if current operation should be aborted (NAK). + */ +static int do_rc_ack(struct hfi1_qp *qp, u32 aeth, u32 psn, int opcode, + u64 val, struct hfi1_ctxtdata *rcd) +{ + struct hfi1_ibport *ibp; + enum ib_wc_status status; + struct hfi1_swqe *wqe; + int ret = 0; + u32 ack_psn; + int diff; + + /* Remove QP from retry timer */ + if (qp->s_flags & (HFI1_S_TIMER | HFI1_S_WAIT_RNR)) { + qp->s_flags &= ~(HFI1_S_TIMER | HFI1_S_WAIT_RNR); + del_timer(&qp->s_timer); + } + + /* + * Note that NAKs implicitly ACK outstanding SEND and RDMA write + * requests and implicitly NAK RDMA read and atomic requests issued + * before the NAK'ed request. The MSN won't include the NAK'ed + * request but will include an ACK'ed request(s). + */ + ack_psn = psn; + if (aeth >> 29) + ack_psn--; + wqe = get_swqe_ptr(qp, qp->s_acked); + ibp = to_iport(qp->ibqp.device, qp->port_num); + + /* + * The MSN might be for a later WQE than the PSN indicates so + * only complete WQEs that the PSN finishes. + */ + while ((diff = delta_psn(ack_psn, wqe->lpsn)) >= 0) { + /* + * RDMA_READ_RESPONSE_ONLY is a special case since + * we want to generate completion events for everything + * before the RDMA read, copy the data, then generate + * the completion for the read. + */ + if (wqe->wr.opcode == IB_WR_RDMA_READ && + opcode == OP(RDMA_READ_RESPONSE_ONLY) && + diff == 0) { + ret = 1; + goto bail; + } + /* + * If this request is a RDMA read or atomic, and the ACK is + * for a later operation, this ACK NAKs the RDMA read or + * atomic. In other words, only a RDMA_READ_LAST or ONLY + * can ACK a RDMA read and likewise for atomic ops. Note + * that the NAK case can only happen if relaxed ordering is + * used and requests are sent after an RDMA read or atomic + * is sent but before the response is received. + */ + if ((wqe->wr.opcode == IB_WR_RDMA_READ && + (opcode != OP(RDMA_READ_RESPONSE_LAST) || diff != 0)) || + ((wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP || + wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) && + (opcode != OP(ATOMIC_ACKNOWLEDGE) || diff != 0))) { + /* Retry this request. */ + if (!(qp->r_flags & HFI1_R_RDMAR_SEQ)) { + qp->r_flags |= HFI1_R_RDMAR_SEQ; + restart_rc(qp, qp->s_last_psn + 1, 0); + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_SEND; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, + &rcd->qp_wait_list); + } + } + /* + * No need to process the ACK/NAK since we are + * restarting an earlier request. + */ + goto bail; + } + if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP || + wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) { + u64 *vaddr = wqe->sg_list[0].vaddr; + *vaddr = val; + } + if (qp->s_num_rd_atomic && + (wqe->wr.opcode == IB_WR_RDMA_READ || + wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP || + wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)) { + qp->s_num_rd_atomic--; + /* Restart sending task if fence is complete */ + if ((qp->s_flags & HFI1_S_WAIT_FENCE) && + !qp->s_num_rd_atomic) { + qp->s_flags &= ~(HFI1_S_WAIT_FENCE | + HFI1_S_WAIT_ACK); + hfi1_schedule_send(qp); + } else if (qp->s_flags & HFI1_S_WAIT_RDMAR) { + qp->s_flags &= ~(HFI1_S_WAIT_RDMAR | + HFI1_S_WAIT_ACK); + hfi1_schedule_send(qp); + } + } + wqe = do_rc_completion(qp, wqe, ibp); + if (qp->s_acked == qp->s_tail) + break; + } + + switch (aeth >> 29) { + case 0: /* ACK */ + this_cpu_inc(*ibp->rc_acks); + if (qp->s_acked != qp->s_tail) { + /* + * We are expecting more ACKs so + * reset the re-transmit timer. + */ + start_timer(qp); + /* + * We can stop re-sending the earlier packets and + * continue with the next packet the receiver wants. + */ + if (cmp_psn(qp->s_psn, psn) <= 0) + reset_psn(qp, psn + 1); + } else if (cmp_psn(qp->s_psn, psn) <= 0) { + qp->s_state = OP(SEND_LAST); + qp->s_psn = psn + 1; + } + if (qp->s_flags & HFI1_S_WAIT_ACK) { + qp->s_flags &= ~HFI1_S_WAIT_ACK; + hfi1_schedule_send(qp); + } + hfi1_get_credit(qp, aeth); + qp->s_rnr_retry = qp->s_rnr_retry_cnt; + qp->s_retry = qp->s_retry_cnt; + update_last_psn(qp, psn); + ret = 1; + goto bail; + + case 1: /* RNR NAK */ + ibp->n_rnr_naks++; + if (qp->s_acked == qp->s_tail) + goto bail; + if (qp->s_flags & HFI1_S_WAIT_RNR) + goto bail; + if (qp->s_rnr_retry == 0) { + status = IB_WC_RNR_RETRY_EXC_ERR; + goto class_b; + } + if (qp->s_rnr_retry_cnt < 7) + qp->s_rnr_retry--; + + /* The last valid PSN is the previous PSN. */ + update_last_psn(qp, psn - 1); + + ibp->n_rc_resends += delta_psn(qp->s_psn, psn); + + reset_psn(qp, psn); + + qp->s_flags &= ~(HFI1_S_WAIT_SSN_CREDIT | HFI1_S_WAIT_ACK); + qp->s_flags |= HFI1_S_WAIT_RNR; + qp->s_timer.function = hfi1_rc_rnr_retry; + qp->s_timer.expires = jiffies + usecs_to_jiffies( + ib_hfi1_rnr_table[(aeth >> HFI1_AETH_CREDIT_SHIFT) & + HFI1_AETH_CREDIT_MASK]); + add_timer(&qp->s_timer); + goto bail; + + case 3: /* NAK */ + if (qp->s_acked == qp->s_tail) + goto bail; + /* The last valid PSN is the previous PSN. */ + update_last_psn(qp, psn - 1); + switch ((aeth >> HFI1_AETH_CREDIT_SHIFT) & + HFI1_AETH_CREDIT_MASK) { + case 0: /* PSN sequence error */ + ibp->n_seq_naks++; + /* + * Back up to the responder's expected PSN. + * Note that we might get a NAK in the middle of an + * RDMA READ response which terminates the RDMA + * READ. + */ + restart_rc(qp, psn, 0); + hfi1_schedule_send(qp); + break; + + case 1: /* Invalid Request */ + status = IB_WC_REM_INV_REQ_ERR; + ibp->n_other_naks++; + goto class_b; + + case 2: /* Remote Access Error */ + status = IB_WC_REM_ACCESS_ERR; + ibp->n_other_naks++; + goto class_b; + + case 3: /* Remote Operation Error */ + status = IB_WC_REM_OP_ERR; + ibp->n_other_naks++; +class_b: + if (qp->s_last == qp->s_acked) { + hfi1_send_complete(qp, wqe, status); + hfi1_error_qp(qp, IB_WC_WR_FLUSH_ERR); + } + break; + + default: + /* Ignore other reserved NAK error codes */ + goto reserved; + } + qp->s_retry = qp->s_retry_cnt; + qp->s_rnr_retry = qp->s_rnr_retry_cnt; + goto bail; + + default: /* 2: reserved */ +reserved: + /* Ignore reserved NAK codes. */ + goto bail; + } + +bail: + return ret; +} + +/* + * We have seen an out of sequence RDMA read middle or last packet. + * This ACKs SENDs and RDMA writes up to the first RDMA read or atomic SWQE. + */ +static void rdma_seq_err(struct hfi1_qp *qp, struct hfi1_ibport *ibp, u32 psn, + struct hfi1_ctxtdata *rcd) +{ + struct hfi1_swqe *wqe; + + /* Remove QP from retry timer */ + if (qp->s_flags & (HFI1_S_TIMER | HFI1_S_WAIT_RNR)) { + qp->s_flags &= ~(HFI1_S_TIMER | HFI1_S_WAIT_RNR); + del_timer(&qp->s_timer); + } + + wqe = get_swqe_ptr(qp, qp->s_acked); + + while (cmp_psn(psn, wqe->lpsn) > 0) { + if (wqe->wr.opcode == IB_WR_RDMA_READ || + wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP || + wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) + break; + wqe = do_rc_completion(qp, wqe, ibp); + } + + ibp->n_rdma_seq++; + qp->r_flags |= HFI1_R_RDMAR_SEQ; + restart_rc(qp, qp->s_last_psn + 1, 0); + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_SEND; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, &rcd->qp_wait_list); + } +} + +/** + * rc_rcv_resp - process an incoming RC response packet + * @ibp: the port this packet came in on + * @ohdr: the other headers for this packet + * @data: the packet data + * @tlen: the packet length + * @qp: the QP for this packet + * @opcode: the opcode for this packet + * @psn: the packet sequence number for this packet + * @hdrsize: the header length + * @pmtu: the path MTU + * + * This is called from hfi1_rc_rcv() to process an incoming RC response + * packet for the given QP. + * Called at interrupt level. + */ +static void rc_rcv_resp(struct hfi1_ibport *ibp, + struct hfi1_other_headers *ohdr, + void *data, u32 tlen, struct hfi1_qp *qp, + u32 opcode, u32 psn, u32 hdrsize, u32 pmtu, + struct hfi1_ctxtdata *rcd) +{ + struct hfi1_swqe *wqe; + enum ib_wc_status status; + unsigned long flags; + int diff; + u32 pad; + u32 aeth; + u64 val; + + spin_lock_irqsave(&qp->s_lock, flags); + + /* Ignore invalid responses. */ + if (cmp_psn(psn, qp->s_next_psn) >= 0) + goto ack_done; + + /* Ignore duplicate responses. */ + diff = cmp_psn(psn, qp->s_last_psn); + if (unlikely(diff <= 0)) { + /* Update credits for "ghost" ACKs */ + if (diff == 0 && opcode == OP(ACKNOWLEDGE)) { + aeth = be32_to_cpu(ohdr->u.aeth); + if ((aeth >> 29) == 0) + hfi1_get_credit(qp, aeth); + } + goto ack_done; + } + + /* + * Skip everything other than the PSN we expect, if we are waiting + * for a reply to a restarted RDMA read or atomic op. + */ + if (qp->r_flags & HFI1_R_RDMAR_SEQ) { + if (cmp_psn(psn, qp->s_last_psn + 1) != 0) + goto ack_done; + qp->r_flags &= ~HFI1_R_RDMAR_SEQ; + } + + if (unlikely(qp->s_acked == qp->s_tail)) + goto ack_done; + wqe = get_swqe_ptr(qp, qp->s_acked); + status = IB_WC_SUCCESS; + + switch (opcode) { + case OP(ACKNOWLEDGE): + case OP(ATOMIC_ACKNOWLEDGE): + case OP(RDMA_READ_RESPONSE_FIRST): + aeth = be32_to_cpu(ohdr->u.aeth); + if (opcode == OP(ATOMIC_ACKNOWLEDGE)) { + __be32 *p = ohdr->u.at.atomic_ack_eth; + + val = ((u64) be32_to_cpu(p[0]) << 32) | + be32_to_cpu(p[1]); + } else + val = 0; + if (!do_rc_ack(qp, aeth, psn, opcode, val, rcd) || + opcode != OP(RDMA_READ_RESPONSE_FIRST)) + goto ack_done; + wqe = get_swqe_ptr(qp, qp->s_acked); + if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ)) + goto ack_op_err; + /* + * If this is a response to a resent RDMA read, we + * have to be careful to copy the data to the right + * location. + */ + qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge, + wqe, psn, pmtu); + goto read_middle; + + case OP(RDMA_READ_RESPONSE_MIDDLE): + /* no AETH, no ACK */ + if (unlikely(cmp_psn(psn, qp->s_last_psn + 1))) + goto ack_seq_err; + if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ)) + goto ack_op_err; +read_middle: + if (unlikely(tlen != (hdrsize + pmtu + 4))) + goto ack_len_err; + if (unlikely(pmtu >= qp->s_rdma_read_len)) + goto ack_len_err; + + /* + * We got a response so update the timeout. + * 4.096 usec. * (1 << qp->timeout) + */ + qp->s_flags |= HFI1_S_TIMER; + mod_timer(&qp->s_timer, jiffies + qp->timeout_jiffies); + if (qp->s_flags & HFI1_S_WAIT_ACK) { + qp->s_flags &= ~HFI1_S_WAIT_ACK; + hfi1_schedule_send(qp); + } + + if (opcode == OP(RDMA_READ_RESPONSE_MIDDLE)) + qp->s_retry = qp->s_retry_cnt; + + /* + * Update the RDMA receive state but do the copy w/o + * holding the locks and blocking interrupts. + */ + qp->s_rdma_read_len -= pmtu; + update_last_psn(qp, psn); + spin_unlock_irqrestore(&qp->s_lock, flags); + hfi1_copy_sge(&qp->s_rdma_read_sge, data, pmtu, 0); + goto bail; + + case OP(RDMA_READ_RESPONSE_ONLY): + aeth = be32_to_cpu(ohdr->u.aeth); + if (!do_rc_ack(qp, aeth, psn, opcode, 0, rcd)) + goto ack_done; + /* Get the number of bytes the message was padded by. */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + /* + * Check that the data size is >= 0 && <= pmtu. + * Remember to account for ICRC (4). + */ + if (unlikely(tlen < (hdrsize + pad + 4))) + goto ack_len_err; + /* + * If this is a response to a resent RDMA read, we + * have to be careful to copy the data to the right + * location. + */ + wqe = get_swqe_ptr(qp, qp->s_acked); + qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge, + wqe, psn, pmtu); + goto read_last; + + case OP(RDMA_READ_RESPONSE_LAST): + /* ACKs READ req. */ + if (unlikely(cmp_psn(psn, qp->s_last_psn + 1))) + goto ack_seq_err; + if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ)) + goto ack_op_err; + /* Get the number of bytes the message was padded by. */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + /* + * Check that the data size is >= 1 && <= pmtu. + * Remember to account for ICRC (4). + */ + if (unlikely(tlen <= (hdrsize + pad + 4))) + goto ack_len_err; +read_last: + tlen -= hdrsize + pad + 4; + if (unlikely(tlen != qp->s_rdma_read_len)) + goto ack_len_err; + aeth = be32_to_cpu(ohdr->u.aeth); + hfi1_copy_sge(&qp->s_rdma_read_sge, data, tlen, 0); + WARN_ON(qp->s_rdma_read_sge.num_sge); + (void) do_rc_ack(qp, aeth, psn, + OP(RDMA_READ_RESPONSE_LAST), 0, rcd); + goto ack_done; + } + +ack_op_err: + status = IB_WC_LOC_QP_OP_ERR; + goto ack_err; + +ack_seq_err: + rdma_seq_err(qp, ibp, psn, rcd); + goto ack_done; + +ack_len_err: + status = IB_WC_LOC_LEN_ERR; +ack_err: + if (qp->s_last == qp->s_acked) { + hfi1_send_complete(qp, wqe, status); + hfi1_error_qp(qp, IB_WC_WR_FLUSH_ERR); + } +ack_done: + spin_unlock_irqrestore(&qp->s_lock, flags); +bail: + return; +} + +/** + * rc_rcv_error - process an incoming duplicate or error RC packet + * @ohdr: the other headers for this packet + * @data: the packet data + * @qp: the QP for this packet + * @opcode: the opcode for this packet + * @psn: the packet sequence number for this packet + * @diff: the difference between the PSN and the expected PSN + * + * This is called from hfi1_rc_rcv() to process an unexpected + * incoming RC packet for the given QP. + * Called at interrupt level. + * Return 1 if no more processing is needed; otherwise return 0 to + * schedule a response to be sent. + */ +static noinline int rc_rcv_error(struct hfi1_other_headers *ohdr, void *data, + struct hfi1_qp *qp, u32 opcode, u32 psn, int diff, + struct hfi1_ctxtdata *rcd) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_ack_entry *e; + unsigned long flags; + u8 i, prev; + int old_req; + + if (diff > 0) { + /* + * Packet sequence error. + * A NAK will ACK earlier sends and RDMA writes. + * Don't queue the NAK if we already sent one. + */ + if (!qp->r_nak_state) { + ibp->n_rc_seqnak++; + qp->r_nak_state = IB_NAK_PSN_ERROR; + /* Use the expected PSN. */ + qp->r_ack_psn = qp->r_psn; + /* + * Wait to send the sequence NAK until all packets + * in the receive queue have been processed. + * Otherwise, we end up propagating congestion. + */ + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_NAK; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, &rcd->qp_wait_list); + } + } + goto done; + } + + /* + * Handle a duplicate request. Don't re-execute SEND, RDMA + * write or atomic op. Don't NAK errors, just silently drop + * the duplicate request. Note that r_sge, r_len, and + * r_rcv_len may be in use so don't modify them. + * + * We are supposed to ACK the earliest duplicate PSN but we + * can coalesce an outstanding duplicate ACK. We have to + * send the earliest so that RDMA reads can be restarted at + * the requester's expected PSN. + * + * First, find where this duplicate PSN falls within the + * ACKs previously sent. + * old_req is true if there is an older response that is scheduled + * to be sent before sending this one. + */ + e = NULL; + old_req = 1; + ibp->n_rc_dupreq++; + + spin_lock_irqsave(&qp->s_lock, flags); + + for (i = qp->r_head_ack_queue; ; i = prev) { + if (i == qp->s_tail_ack_queue) + old_req = 0; + if (i) + prev = i - 1; + else + prev = HFI1_MAX_RDMA_ATOMIC; + if (prev == qp->r_head_ack_queue) { + e = NULL; + break; + } + e = &qp->s_ack_queue[prev]; + if (!e->opcode) { + e = NULL; + break; + } + if (cmp_psn(psn, e->psn) >= 0) { + if (prev == qp->s_tail_ack_queue && + cmp_psn(psn, e->lpsn) <= 0) + old_req = 0; + break; + } + } + switch (opcode) { + case OP(RDMA_READ_REQUEST): { + struct ib_reth *reth; + u32 offset; + u32 len; + + /* + * If we didn't find the RDMA read request in the ack queue, + * we can ignore this request. + */ + if (!e || e->opcode != OP(RDMA_READ_REQUEST)) + goto unlock_done; + /* RETH comes after BTH */ + reth = &ohdr->u.rc.reth; + /* + * Address range must be a subset of the original + * request and start on pmtu boundaries. + * We reuse the old ack_queue slot since the requester + * should not back up and request an earlier PSN for the + * same request. + */ + offset = delta_psn(psn, e->psn) * qp->pmtu; + len = be32_to_cpu(reth->length); + if (unlikely(offset + len != e->rdma_sge.sge_length)) + goto unlock_done; + if (e->rdma_sge.mr) { + hfi1_put_mr(e->rdma_sge.mr); + e->rdma_sge.mr = NULL; + } + if (len != 0) { + u32 rkey = be32_to_cpu(reth->rkey); + u64 vaddr = be64_to_cpu(reth->vaddr); + int ok; + + ok = hfi1_rkey_ok(qp, &e->rdma_sge, len, vaddr, rkey, + IB_ACCESS_REMOTE_READ); + if (unlikely(!ok)) + goto unlock_done; + } else { + e->rdma_sge.vaddr = NULL; + e->rdma_sge.length = 0; + e->rdma_sge.sge_length = 0; + } + e->psn = psn; + if (old_req) + goto unlock_done; + qp->s_tail_ack_queue = prev; + break; + } + + case OP(COMPARE_SWAP): + case OP(FETCH_ADD): { + /* + * If we didn't find the atomic request in the ack queue + * or the send tasklet is already backed up to send an + * earlier entry, we can ignore this request. + */ + if (!e || e->opcode != (u8) opcode || old_req) + goto unlock_done; + qp->s_tail_ack_queue = prev; + break; + } + + default: + /* + * Ignore this operation if it doesn't request an ACK + * or an earlier RDMA read or atomic is going to be resent. + */ + if (!(psn & IB_BTH_REQ_ACK) || old_req) + goto unlock_done; + /* + * Resend the most recent ACK if this request is + * after all the previous RDMA reads and atomics. + */ + if (i == qp->r_head_ack_queue) { + spin_unlock_irqrestore(&qp->s_lock, flags); + qp->r_nak_state = 0; + qp->r_ack_psn = qp->r_psn - 1; + goto send_ack; + } + + /* + * Resend the RDMA read or atomic op which + * ACKs this duplicate request. + */ + qp->s_tail_ack_queue = i; + break; + } + qp->s_ack_state = OP(ACKNOWLEDGE); + qp->s_flags |= HFI1_S_RESP_PENDING; + qp->r_nak_state = 0; + hfi1_schedule_send(qp); + +unlock_done: + spin_unlock_irqrestore(&qp->s_lock, flags); +done: + return 1; + +send_ack: + return 0; +} + +void hfi1_rc_error(struct hfi1_qp *qp, enum ib_wc_status err) +{ + unsigned long flags; + int lastwqe; + + spin_lock_irqsave(&qp->s_lock, flags); + lastwqe = hfi1_error_qp(qp, err); + spin_unlock_irqrestore(&qp->s_lock, flags); + + if (lastwqe) { + struct ib_event ev; + + ev.device = qp->ibqp.device; + ev.element.qp = &qp->ibqp; + ev.event = IB_EVENT_QP_LAST_WQE_REACHED; + qp->ibqp.event_handler(&ev, qp->ibqp.qp_context); + } +} + +static inline void update_ack_queue(struct hfi1_qp *qp, unsigned n) +{ + unsigned next; + + next = n + 1; + if (next > HFI1_MAX_RDMA_ATOMIC) + next = 0; + qp->s_tail_ack_queue = next; + qp->s_ack_state = OP(ACKNOWLEDGE); +} + +static void log_cca_event(struct hfi1_pportdata *ppd, u8 sl, u32 rlid, + u32 lqpn, u32 rqpn, u8 svc_type) +{ + struct opa_hfi1_cong_log_event_internal *cc_event; + + if (sl >= OPA_MAX_SLS) + return; + + spin_lock(&ppd->cc_log_lock); + + ppd->threshold_cong_event_map[sl/8] |= 1 << (sl % 8); + ppd->threshold_event_counter++; + + cc_event = &ppd->cc_events[ppd->cc_log_idx++]; + if (ppd->cc_log_idx == OPA_CONG_LOG_ELEMS) + ppd->cc_log_idx = 0; + cc_event->lqpn = lqpn & HFI1_QPN_MASK; + cc_event->rqpn = rqpn & HFI1_QPN_MASK; + cc_event->sl = sl; + cc_event->svc_type = svc_type; + cc_event->rlid = rlid; + /* keep timestamp in units of 1.024 usec */ + cc_event->timestamp = ktime_to_ns(ktime_get()) / 1024; + + spin_unlock(&ppd->cc_log_lock); +} + +void process_becn(struct hfi1_pportdata *ppd, u8 sl, u16 rlid, u32 lqpn, + u32 rqpn, u8 svc_type) +{ + struct cca_timer *cca_timer; + u16 ccti, ccti_incr, ccti_timer, ccti_limit; + u8 trigger_threshold; + struct cc_state *cc_state; + + if (sl >= OPA_MAX_SLS) + return; + + cca_timer = &ppd->cca_timer[sl]; + + cc_state = get_cc_state(ppd); + + if (cc_state == NULL) + return; + + /* + * 1) increase CCTI (for this SL) + * 2) select IPG (i.e., call set_link_ipg()) + * 3) start timer + */ + ccti_limit = cc_state->cct.ccti_limit; + ccti_incr = cc_state->cong_setting.entries[sl].ccti_increase; + ccti_timer = cc_state->cong_setting.entries[sl].ccti_timer; + trigger_threshold = + cc_state->cong_setting.entries[sl].trigger_threshold; + + spin_lock(&ppd->cca_timer_lock); + + if (cca_timer->ccti < ccti_limit) { + if (cca_timer->ccti + ccti_incr <= ccti_limit) + cca_timer->ccti += ccti_incr; + else + cca_timer->ccti = ccti_limit; + set_link_ipg(ppd); + } + + spin_unlock(&ppd->cca_timer_lock); + + ccti = cca_timer->ccti; + + if (!hrtimer_active(&cca_timer->hrtimer)) { + /* ccti_timer is in units of 1.024 usec */ + unsigned long nsec = 1024 * ccti_timer; + + hrtimer_start(&cca_timer->hrtimer, ns_to_ktime(nsec), + HRTIMER_MODE_REL); + } + + if ((trigger_threshold != 0) && (ccti >= trigger_threshold)) + log_cca_event(ppd, sl, rlid, lqpn, rqpn, svc_type); +} + +/** + * hfi1_rc_rcv - process an incoming RC packet + * @rcd: the context pointer + * @hdr: the header of this packet + * @rcv_flags: flags relevant to rcv processing + * @data: the packet data + * @tlen: the packet length + * @qp: the QP for this packet + * + * This is called from qp_rcv() to process an incoming RC packet + * for the given QP. + * Called at interrupt level. + */ +void hfi1_rc_rcv(struct hfi1_packet *packet) +{ + struct hfi1_ctxtdata *rcd = packet->rcd; + struct hfi1_ib_header *hdr = packet->hdr; + u32 rcv_flags = packet->rcv_flags; + void *data = packet->ebuf; + u32 tlen = packet->tlen; + struct hfi1_qp *qp = packet->qp; + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct hfi1_other_headers *ohdr = packet->ohdr; + u32 bth0, opcode; + u32 hdrsize = packet->hlen; + u32 psn; + u32 pad; + struct ib_wc wc; + u32 pmtu = qp->pmtu; + int diff; + struct ib_reth *reth; + unsigned long flags; + u32 bth1; + int ret, is_fecn = 0; + + bth0 = be32_to_cpu(ohdr->bth[0]); + if (hfi1_ruc_check_hdr(ibp, hdr, rcv_flags & HFI1_HAS_GRH, qp, bth0)) + return; + + bth1 = be32_to_cpu(ohdr->bth[1]); + if (unlikely(bth1 & (HFI1_BECN_SMASK | HFI1_FECN_SMASK))) { + if (bth1 & HFI1_BECN_SMASK) { + u16 rlid = qp->remote_ah_attr.dlid; + u32 lqpn, rqpn; + + lqpn = qp->ibqp.qp_num; + rqpn = qp->remote_qpn; + process_becn( + ppd, + qp->remote_ah_attr.sl, + rlid, lqpn, rqpn, + IB_CC_SVCTYPE_RC); + } + is_fecn = bth1 & HFI1_FECN_SMASK; + } + + psn = be32_to_cpu(ohdr->bth[2]); + opcode = bth0 >> 24; + + /* + * Process responses (ACKs) before anything else. Note that the + * packet sequence number will be for something in the send work + * queue rather than the expected receive packet sequence number. + * In other words, this QP is the requester. + */ + if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) && + opcode <= OP(ATOMIC_ACKNOWLEDGE)) { + rc_rcv_resp(ibp, ohdr, data, tlen, qp, opcode, psn, + hdrsize, pmtu, rcd); + if (is_fecn) + goto send_ack; + return; + } + + /* Compute 24 bits worth of difference. */ + diff = delta_psn(psn, qp->r_psn); + if (unlikely(diff)) { + if (rc_rcv_error(ohdr, data, qp, opcode, psn, diff, rcd)) + return; + goto send_ack; + } + + /* Check for opcode sequence errors. */ + switch (qp->r_state) { + case OP(SEND_FIRST): + case OP(SEND_MIDDLE): + if (opcode == OP(SEND_MIDDLE) || + opcode == OP(SEND_LAST) || + opcode == OP(SEND_LAST_WITH_IMMEDIATE)) + break; + goto nack_inv; + + case OP(RDMA_WRITE_FIRST): + case OP(RDMA_WRITE_MIDDLE): + if (opcode == OP(RDMA_WRITE_MIDDLE) || + opcode == OP(RDMA_WRITE_LAST) || + opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE)) + break; + goto nack_inv; + + default: + if (opcode == OP(SEND_MIDDLE) || + opcode == OP(SEND_LAST) || + opcode == OP(SEND_LAST_WITH_IMMEDIATE) || + opcode == OP(RDMA_WRITE_MIDDLE) || + opcode == OP(RDMA_WRITE_LAST) || + opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE)) + goto nack_inv; + /* + * Note that it is up to the requester to not send a new + * RDMA read or atomic operation before receiving an ACK + * for the previous operation. + */ + break; + } + + if (qp->state == IB_QPS_RTR && !(qp->r_flags & HFI1_R_COMM_EST)) + qp_comm_est(qp); + + /* OK, process the packet. */ + switch (opcode) { + case OP(SEND_FIRST): + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) + goto nack_op_err; + if (!ret) + goto rnr_nak; + qp->r_rcv_len = 0; + /* FALLTHROUGH */ + case OP(SEND_MIDDLE): + case OP(RDMA_WRITE_MIDDLE): +send_middle: + /* Check for invalid length PMTU or posted rwqe len. */ + if (unlikely(tlen != (hdrsize + pmtu + 4))) + goto nack_inv; + qp->r_rcv_len += pmtu; + if (unlikely(qp->r_rcv_len > qp->r_len)) + goto nack_inv; + hfi1_copy_sge(&qp->r_sge, data, pmtu, 1); + break; + + case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE): + /* consume RWQE */ + ret = hfi1_get_rwqe(qp, 1); + if (ret < 0) + goto nack_op_err; + if (!ret) + goto rnr_nak; + goto send_last_imm; + + case OP(SEND_ONLY): + case OP(SEND_ONLY_WITH_IMMEDIATE): + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) + goto nack_op_err; + if (!ret) + goto rnr_nak; + qp->r_rcv_len = 0; + if (opcode == OP(SEND_ONLY)) + goto no_immediate_data; + /* FALLTHROUGH for SEND_ONLY_WITH_IMMEDIATE */ + case OP(SEND_LAST_WITH_IMMEDIATE): +send_last_imm: + wc.ex.imm_data = ohdr->u.imm_data; + wc.wc_flags = IB_WC_WITH_IMM; + goto send_last; + case OP(SEND_LAST): + case OP(RDMA_WRITE_LAST): +no_immediate_data: + wc.wc_flags = 0; + wc.ex.imm_data = 0; +send_last: + /* Get the number of bytes the message was padded by. */ + pad = (bth0 >> 20) & 3; + /* Check for invalid length. */ + /* LAST len should be >= 1 */ + if (unlikely(tlen < (hdrsize + pad + 4))) + goto nack_inv; + /* Don't count the CRC. */ + tlen -= (hdrsize + pad + 4); + wc.byte_len = tlen + qp->r_rcv_len; + if (unlikely(wc.byte_len > qp->r_len)) + goto nack_inv; + hfi1_copy_sge(&qp->r_sge, data, tlen, 1); + hfi1_put_ss(&qp->r_sge); + qp->r_msn++; + if (!test_and_clear_bit(HFI1_R_WRID_VALID, &qp->r_aflags)) + break; + wc.wr_id = qp->r_wr_id; + wc.status = IB_WC_SUCCESS; + if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) || + opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE)) + wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; + else + wc.opcode = IB_WC_RECV; + wc.qp = &qp->ibqp; + wc.src_qp = qp->remote_qpn; + wc.slid = qp->remote_ah_attr.dlid; + /* + * It seems that IB mandates the presence of an SL in a + * work completion only for the UD transport (see section + * 11.4.2 of IBTA Vol. 1). + * + * However, the way the SL is chosen below is consistent + * with the way that IB/qib works and is trying avoid + * introducing incompatibilities. + * + * See also OPA Vol. 1, section 9.7.6, and table 9-17. + */ + wc.sl = qp->remote_ah_attr.sl; + /* zero fields that are N/A */ + wc.vendor_err = 0; + wc.pkey_index = 0; + wc.dlid_path_bits = 0; + wc.port_num = 0; + /* Signal completion event if the solicited bit is set. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, + (bth0 & IB_BTH_SOLICITED) != 0); + break; + + case OP(RDMA_WRITE_FIRST): + case OP(RDMA_WRITE_ONLY): + case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE))) + goto nack_inv; + /* consume RWQE */ + reth = &ohdr->u.rc.reth; + qp->r_len = be32_to_cpu(reth->length); + qp->r_rcv_len = 0; + qp->r_sge.sg_list = NULL; + if (qp->r_len != 0) { + u32 rkey = be32_to_cpu(reth->rkey); + u64 vaddr = be64_to_cpu(reth->vaddr); + int ok; + + /* Check rkey & NAK */ + ok = hfi1_rkey_ok(qp, &qp->r_sge.sge, qp->r_len, vaddr, + rkey, IB_ACCESS_REMOTE_WRITE); + if (unlikely(!ok)) + goto nack_acc; + qp->r_sge.num_sge = 1; + } else { + qp->r_sge.num_sge = 0; + qp->r_sge.sge.mr = NULL; + qp->r_sge.sge.vaddr = NULL; + qp->r_sge.sge.length = 0; + qp->r_sge.sge.sge_length = 0; + } + if (opcode == OP(RDMA_WRITE_FIRST)) + goto send_middle; + else if (opcode == OP(RDMA_WRITE_ONLY)) + goto no_immediate_data; + ret = hfi1_get_rwqe(qp, 1); + if (ret < 0) + goto nack_op_err; + if (!ret) + goto rnr_nak; + wc.ex.imm_data = ohdr->u.rc.imm_data; + wc.wc_flags = IB_WC_WITH_IMM; + goto send_last; + + case OP(RDMA_READ_REQUEST): { + struct hfi1_ack_entry *e; + u32 len; + u8 next; + + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ))) + goto nack_inv; + next = qp->r_head_ack_queue + 1; + /* s_ack_queue is size HFI1_MAX_RDMA_ATOMIC+1 so use > not >= */ + if (next > HFI1_MAX_RDMA_ATOMIC) + next = 0; + spin_lock_irqsave(&qp->s_lock, flags); + if (unlikely(next == qp->s_tail_ack_queue)) { + if (!qp->s_ack_queue[next].sent) + goto nack_inv_unlck; + update_ack_queue(qp, next); + } + e = &qp->s_ack_queue[qp->r_head_ack_queue]; + if (e->opcode == OP(RDMA_READ_REQUEST) && e->rdma_sge.mr) { + hfi1_put_mr(e->rdma_sge.mr); + e->rdma_sge.mr = NULL; + } + reth = &ohdr->u.rc.reth; + len = be32_to_cpu(reth->length); + if (len) { + u32 rkey = be32_to_cpu(reth->rkey); + u64 vaddr = be64_to_cpu(reth->vaddr); + int ok; + + /* Check rkey & NAK */ + ok = hfi1_rkey_ok(qp, &e->rdma_sge, len, vaddr, + rkey, IB_ACCESS_REMOTE_READ); + if (unlikely(!ok)) + goto nack_acc_unlck; + /* + * Update the next expected PSN. We add 1 later + * below, so only add the remainder here. + */ + if (len > pmtu) + qp->r_psn += (len - 1) / pmtu; + } else { + e->rdma_sge.mr = NULL; + e->rdma_sge.vaddr = NULL; + e->rdma_sge.length = 0; + e->rdma_sge.sge_length = 0; + } + e->opcode = opcode; + e->sent = 0; + e->psn = psn; + e->lpsn = qp->r_psn; + /* + * We need to increment the MSN here instead of when we + * finish sending the result since a duplicate request would + * increment it more than once. + */ + qp->r_msn++; + qp->r_psn++; + qp->r_state = opcode; + qp->r_nak_state = 0; + qp->r_head_ack_queue = next; + + /* Schedule the send tasklet. */ + qp->s_flags |= HFI1_S_RESP_PENDING; + hfi1_schedule_send(qp); + + spin_unlock_irqrestore(&qp->s_lock, flags); + if (is_fecn) + goto send_ack; + return; + } + + case OP(COMPARE_SWAP): + case OP(FETCH_ADD): { + struct ib_atomic_eth *ateth; + struct hfi1_ack_entry *e; + u64 vaddr; + atomic64_t *maddr; + u64 sdata; + u32 rkey; + u8 next; + + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC))) + goto nack_inv; + next = qp->r_head_ack_queue + 1; + if (next > HFI1_MAX_RDMA_ATOMIC) + next = 0; + spin_lock_irqsave(&qp->s_lock, flags); + if (unlikely(next == qp->s_tail_ack_queue)) { + if (!qp->s_ack_queue[next].sent) + goto nack_inv_unlck; + update_ack_queue(qp, next); + } + e = &qp->s_ack_queue[qp->r_head_ack_queue]; + if (e->opcode == OP(RDMA_READ_REQUEST) && e->rdma_sge.mr) { + hfi1_put_mr(e->rdma_sge.mr); + e->rdma_sge.mr = NULL; + } + ateth = &ohdr->u.atomic_eth; + vaddr = ((u64) be32_to_cpu(ateth->vaddr[0]) << 32) | + be32_to_cpu(ateth->vaddr[1]); + if (unlikely(vaddr & (sizeof(u64) - 1))) + goto nack_inv_unlck; + rkey = be32_to_cpu(ateth->rkey); + /* Check rkey & NAK */ + if (unlikely(!hfi1_rkey_ok(qp, &qp->r_sge.sge, sizeof(u64), + vaddr, rkey, + IB_ACCESS_REMOTE_ATOMIC))) + goto nack_acc_unlck; + /* Perform atomic OP and save result. */ + maddr = (atomic64_t *) qp->r_sge.sge.vaddr; + sdata = be64_to_cpu(ateth->swap_data); + e->atomic_data = (opcode == OP(FETCH_ADD)) ? + (u64) atomic64_add_return(sdata, maddr) - sdata : + (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr, + be64_to_cpu(ateth->compare_data), + sdata); + hfi1_put_mr(qp->r_sge.sge.mr); + qp->r_sge.num_sge = 0; + e->opcode = opcode; + e->sent = 0; + e->psn = psn; + e->lpsn = psn; + qp->r_msn++; + qp->r_psn++; + qp->r_state = opcode; + qp->r_nak_state = 0; + qp->r_head_ack_queue = next; + + /* Schedule the send tasklet. */ + qp->s_flags |= HFI1_S_RESP_PENDING; + hfi1_schedule_send(qp); + + spin_unlock_irqrestore(&qp->s_lock, flags); + if (is_fecn) + goto send_ack; + return; + } + + default: + /* NAK unknown opcodes. */ + goto nack_inv; + } + qp->r_psn++; + qp->r_state = opcode; + qp->r_ack_psn = psn; + qp->r_nak_state = 0; + /* Send an ACK if requested or required. */ + if (psn & (1 << 31)) + goto send_ack; + return; + +rnr_nak: + qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer; + qp->r_ack_psn = qp->r_psn; + /* Queue RNR NAK for later */ + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_NAK; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, &rcd->qp_wait_list); + } + return; + +nack_op_err: + hfi1_rc_error(qp, IB_WC_LOC_QP_OP_ERR); + qp->r_nak_state = IB_NAK_REMOTE_OPERATIONAL_ERROR; + qp->r_ack_psn = qp->r_psn; + /* Queue NAK for later */ + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_NAK; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, &rcd->qp_wait_list); + } + return; + +nack_inv_unlck: + spin_unlock_irqrestore(&qp->s_lock, flags); +nack_inv: + hfi1_rc_error(qp, IB_WC_LOC_QP_OP_ERR); + qp->r_nak_state = IB_NAK_INVALID_REQUEST; + qp->r_ack_psn = qp->r_psn; + /* Queue NAK for later */ + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_NAK; + atomic_inc(&qp->refcount); + list_add_tail(&qp->rspwait, &rcd->qp_wait_list); + } + return; + +nack_acc_unlck: + spin_unlock_irqrestore(&qp->s_lock, flags); +nack_acc: + hfi1_rc_error(qp, IB_WC_LOC_PROT_ERR); + qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR; + qp->r_ack_psn = qp->r_psn; +send_ack: + hfi1_send_rc_ack(rcd, qp, is_fecn); +} + +void hfi1_rc_hdrerr( + struct hfi1_ctxtdata *rcd, + struct hfi1_ib_header *hdr, + u32 rcv_flags, + struct hfi1_qp *qp) +{ + int has_grh = rcv_flags & HFI1_HAS_GRH; + struct hfi1_other_headers *ohdr; + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + int diff; + u8 opcode; + u32 psn; + + /* Check for GRH */ + ohdr = &hdr->u.oth; + if (has_grh) + ohdr = &hdr->u.l.oth; + + opcode = be32_to_cpu(ohdr->bth[0]); + if (hfi1_ruc_check_hdr(ibp, hdr, has_grh, qp, opcode)) + return; + + psn = be32_to_cpu(ohdr->bth[2]); + opcode >>= 24; + + /* Only deal with RDMA Writes for now */ + if (opcode < IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST) { + diff = delta_psn(psn, qp->r_psn); + if (!qp->r_nak_state && diff >= 0) { + ibp->n_rc_seqnak++; + qp->r_nak_state = IB_NAK_PSN_ERROR; + /* Use the expected PSN. */ + qp->r_ack_psn = qp->r_psn; + /* + * Wait to send the sequence + * NAK until all packets + * in the receive queue have + * been processed. + * Otherwise, we end up + * propagating congestion. + */ + if (list_empty(&qp->rspwait)) { + qp->r_flags |= HFI1_R_RSP_NAK; + atomic_inc(&qp->refcount); + list_add_tail( + &qp->rspwait, + &rcd->qp_wait_list); + } + } /* Out of sequence NAK */ + } /* QP Request NAKs */ +} diff --git a/drivers/staging/rdma/hfi1/ruc.c b/drivers/staging/rdma/hfi1/ruc.c new file mode 100644 index 000000000000..a4115288db66 --- /dev/null +++ b/drivers/staging/rdma/hfi1/ruc.c @@ -0,0 +1,948 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/spinlock.h> + +#include "hfi.h" +#include "mad.h" +#include "qp.h" +#include "sdma.h" + +/* + * Convert the AETH RNR timeout code into the number of microseconds. + */ +const u32 ib_hfi1_rnr_table[32] = { + 655360, /* 00: 655.36 */ + 10, /* 01: .01 */ + 20, /* 02 .02 */ + 30, /* 03: .03 */ + 40, /* 04: .04 */ + 60, /* 05: .06 */ + 80, /* 06: .08 */ + 120, /* 07: .12 */ + 160, /* 08: .16 */ + 240, /* 09: .24 */ + 320, /* 0A: .32 */ + 480, /* 0B: .48 */ + 640, /* 0C: .64 */ + 960, /* 0D: .96 */ + 1280, /* 0E: 1.28 */ + 1920, /* 0F: 1.92 */ + 2560, /* 10: 2.56 */ + 3840, /* 11: 3.84 */ + 5120, /* 12: 5.12 */ + 7680, /* 13: 7.68 */ + 10240, /* 14: 10.24 */ + 15360, /* 15: 15.36 */ + 20480, /* 16: 20.48 */ + 30720, /* 17: 30.72 */ + 40960, /* 18: 40.96 */ + 61440, /* 19: 61.44 */ + 81920, /* 1A: 81.92 */ + 122880, /* 1B: 122.88 */ + 163840, /* 1C: 163.84 */ + 245760, /* 1D: 245.76 */ + 327680, /* 1E: 327.68 */ + 491520 /* 1F: 491.52 */ +}; + +/* + * Validate a RWQE and fill in the SGE state. + * Return 1 if OK. + */ +static int init_sge(struct hfi1_qp *qp, struct hfi1_rwqe *wqe) +{ + int i, j, ret; + struct ib_wc wc; + struct hfi1_lkey_table *rkt; + struct hfi1_pd *pd; + struct hfi1_sge_state *ss; + + rkt = &to_idev(qp->ibqp.device)->lk_table; + pd = to_ipd(qp->ibqp.srq ? qp->ibqp.srq->pd : qp->ibqp.pd); + ss = &qp->r_sge; + ss->sg_list = qp->r_sg_list; + qp->r_len = 0; + for (i = j = 0; i < wqe->num_sge; i++) { + if (wqe->sg_list[i].length == 0) + continue; + /* Check LKEY */ + if (!hfi1_lkey_ok(rkt, pd, j ? &ss->sg_list[j - 1] : &ss->sge, + &wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE)) + goto bad_lkey; + qp->r_len += wqe->sg_list[i].length; + j++; + } + ss->num_sge = j; + ss->total_len = qp->r_len; + ret = 1; + goto bail; + +bad_lkey: + while (j) { + struct hfi1_sge *sge = --j ? &ss->sg_list[j - 1] : &ss->sge; + + hfi1_put_mr(sge->mr); + } + ss->num_sge = 0; + memset(&wc, 0, sizeof(wc)); + wc.wr_id = wqe->wr_id; + wc.status = IB_WC_LOC_PROT_ERR; + wc.opcode = IB_WC_RECV; + wc.qp = &qp->ibqp; + /* Signal solicited completion event. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1); + ret = 0; +bail: + return ret; +} + +/** + * hfi1_get_rwqe - copy the next RWQE into the QP's RWQE + * @qp: the QP + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge + * + * Return -1 if there is a local error, 0 if no RWQE is available, + * otherwise return 1. + * + * Can be called from interrupt level. + */ +int hfi1_get_rwqe(struct hfi1_qp *qp, int wr_id_only) +{ + unsigned long flags; + struct hfi1_rq *rq; + struct hfi1_rwq *wq; + struct hfi1_srq *srq; + struct hfi1_rwqe *wqe; + void (*handler)(struct ib_event *, void *); + u32 tail; + int ret; + + if (qp->ibqp.srq) { + srq = to_isrq(qp->ibqp.srq); + handler = srq->ibsrq.event_handler; + rq = &srq->rq; + } else { + srq = NULL; + handler = NULL; + rq = &qp->r_rq; + } + + spin_lock_irqsave(&rq->lock, flags); + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK)) { + ret = 0; + goto unlock; + } + + wq = rq->wq; + tail = wq->tail; + /* Validate tail before using it since it is user writable. */ + if (tail >= rq->size) + tail = 0; + if (unlikely(tail == wq->head)) { + ret = 0; + goto unlock; + } + /* Make sure entry is read after head index is read. */ + smp_rmb(); + wqe = get_rwqe_ptr(rq, tail); + /* + * Even though we update the tail index in memory, the verbs + * consumer is not supposed to post more entries until a + * completion is generated. + */ + if (++tail >= rq->size) + tail = 0; + wq->tail = tail; + if (!wr_id_only && !init_sge(qp, wqe)) { + ret = -1; + goto unlock; + } + qp->r_wr_id = wqe->wr_id; + + ret = 1; + set_bit(HFI1_R_WRID_VALID, &qp->r_aflags); + if (handler) { + u32 n; + + /* + * Validate head pointer value and compute + * the number of remaining WQEs. + */ + n = wq->head; + if (n >= rq->size) + n = 0; + if (n < tail) + n += rq->size - tail; + else + n -= tail; + if (n < srq->limit) { + struct ib_event ev; + + srq->limit = 0; + spin_unlock_irqrestore(&rq->lock, flags); + ev.device = qp->ibqp.device; + ev.element.srq = qp->ibqp.srq; + ev.event = IB_EVENT_SRQ_LIMIT_REACHED; + handler(&ev, srq->ibsrq.srq_context); + goto bail; + } + } +unlock: + spin_unlock_irqrestore(&rq->lock, flags); +bail: + return ret; +} + +/* + * Switch to alternate path. + * The QP s_lock should be held and interrupts disabled. + */ +void hfi1_migrate_qp(struct hfi1_qp *qp) +{ + struct ib_event ev; + + qp->s_mig_state = IB_MIG_MIGRATED; + qp->remote_ah_attr = qp->alt_ah_attr; + qp->port_num = qp->alt_ah_attr.port_num; + qp->s_pkey_index = qp->s_alt_pkey_index; + qp->s_flags |= HFI1_S_AHG_CLEAR; + + ev.device = qp->ibqp.device; + ev.element.qp = &qp->ibqp; + ev.event = IB_EVENT_PATH_MIG; + qp->ibqp.event_handler(&ev, qp->ibqp.qp_context); +} + +static __be64 get_sguid(struct hfi1_ibport *ibp, unsigned index) +{ + if (!index) { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + return cpu_to_be64(ppd->guid); + } + return ibp->guids[index - 1]; +} + +static int gid_ok(union ib_gid *gid, __be64 gid_prefix, __be64 id) +{ + return (gid->global.interface_id == id && + (gid->global.subnet_prefix == gid_prefix || + gid->global.subnet_prefix == IB_DEFAULT_GID_PREFIX)); +} + +/* + * + * This should be called with the QP r_lock held. + * + * The s_lock will be acquired around the hfi1_migrate_qp() call. + */ +int hfi1_ruc_check_hdr(struct hfi1_ibport *ibp, struct hfi1_ib_header *hdr, + int has_grh, struct hfi1_qp *qp, u32 bth0) +{ + __be64 guid; + unsigned long flags; + u8 sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + + if (qp->s_mig_state == IB_MIG_ARMED && (bth0 & IB_BTH_MIG_REQ)) { + if (!has_grh) { + if (qp->alt_ah_attr.ah_flags & IB_AH_GRH) + goto err; + } else { + if (!(qp->alt_ah_attr.ah_flags & IB_AH_GRH)) + goto err; + guid = get_sguid(ibp, qp->alt_ah_attr.grh.sgid_index); + if (!gid_ok(&hdr->u.l.grh.dgid, ibp->gid_prefix, guid)) + goto err; + if (!gid_ok(&hdr->u.l.grh.sgid, + qp->alt_ah_attr.grh.dgid.global.subnet_prefix, + qp->alt_ah_attr.grh.dgid.global.interface_id)) + goto err; + } + if (unlikely(rcv_pkey_check(ppd_from_ibp(ibp), (u16)bth0, + sc5, be16_to_cpu(hdr->lrh[3])))) { + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_PKEY, + (u16)bth0, + (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF, + 0, qp->ibqp.qp_num, + hdr->lrh[3], hdr->lrh[1]); + goto err; + } + /* Validate the SLID. See Ch. 9.6.1.5 and 17.2.8 */ + if (be16_to_cpu(hdr->lrh[3]) != qp->alt_ah_attr.dlid || + ppd_from_ibp(ibp)->port != qp->alt_ah_attr.port_num) + goto err; + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_migrate_qp(qp); + spin_unlock_irqrestore(&qp->s_lock, flags); + } else { + if (!has_grh) { + if (qp->remote_ah_attr.ah_flags & IB_AH_GRH) + goto err; + } else { + if (!(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) + goto err; + guid = get_sguid(ibp, + qp->remote_ah_attr.grh.sgid_index); + if (!gid_ok(&hdr->u.l.grh.dgid, ibp->gid_prefix, guid)) + goto err; + if (!gid_ok(&hdr->u.l.grh.sgid, + qp->remote_ah_attr.grh.dgid.global.subnet_prefix, + qp->remote_ah_attr.grh.dgid.global.interface_id)) + goto err; + } + if (unlikely(rcv_pkey_check(ppd_from_ibp(ibp), (u16)bth0, + sc5, be16_to_cpu(hdr->lrh[3])))) { + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_PKEY, + (u16)bth0, + (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF, + 0, qp->ibqp.qp_num, + hdr->lrh[3], hdr->lrh[1]); + goto err; + } + /* Validate the SLID. See Ch. 9.6.1.5 */ + if (be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid || + ppd_from_ibp(ibp)->port != qp->port_num) + goto err; + if (qp->s_mig_state == IB_MIG_REARM && + !(bth0 & IB_BTH_MIG_REQ)) + qp->s_mig_state = IB_MIG_ARMED; + } + + return 0; + +err: + return 1; +} + +/** + * ruc_loopback - handle UC and RC loopback requests + * @sqp: the sending QP + * + * This is called from hfi1_do_send() to + * forward a WQE addressed to the same HFI. + * Note that although we are single threaded due to the tasklet, we still + * have to protect against post_send(). We don't have to worry about + * receive interrupts since this is a connected protocol and all packets + * will pass through here. + */ +static void ruc_loopback(struct hfi1_qp *sqp) +{ + struct hfi1_ibport *ibp = to_iport(sqp->ibqp.device, sqp->port_num); + struct hfi1_qp *qp; + struct hfi1_swqe *wqe; + struct hfi1_sge *sge; + unsigned long flags; + struct ib_wc wc; + u64 sdata; + atomic64_t *maddr; + enum ib_wc_status send_status; + int release; + int ret; + + rcu_read_lock(); + + /* + * Note that we check the responder QP state after + * checking the requester's state. + */ + qp = hfi1_lookup_qpn(ibp, sqp->remote_qpn); + + spin_lock_irqsave(&sqp->s_lock, flags); + + /* Return if we are already busy processing a work request. */ + if ((sqp->s_flags & (HFI1_S_BUSY | HFI1_S_ANY_WAIT)) || + !(ib_hfi1_state_ops[sqp->state] & HFI1_PROCESS_OR_FLUSH_SEND)) + goto unlock; + + sqp->s_flags |= HFI1_S_BUSY; + +again: + if (sqp->s_last == sqp->s_head) + goto clr_busy; + wqe = get_swqe_ptr(sqp, sqp->s_last); + + /* Return if it is not OK to start a new work request. */ + if (!(ib_hfi1_state_ops[sqp->state] & HFI1_PROCESS_NEXT_SEND_OK)) { + if (!(ib_hfi1_state_ops[sqp->state] & HFI1_FLUSH_SEND)) + goto clr_busy; + /* We are in the error state, flush the work request. */ + send_status = IB_WC_WR_FLUSH_ERR; + goto flush_send; + } + + /* + * We can rely on the entry not changing without the s_lock + * being held until we update s_last. + * We increment s_cur to indicate s_last is in progress. + */ + if (sqp->s_last == sqp->s_cur) { + if (++sqp->s_cur >= sqp->s_size) + sqp->s_cur = 0; + } + spin_unlock_irqrestore(&sqp->s_lock, flags); + + if (!qp || !(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK) || + qp->ibqp.qp_type != sqp->ibqp.qp_type) { + ibp->n_pkt_drops++; + /* + * For RC, the requester would timeout and retry so + * shortcut the timeouts and just signal too many retries. + */ + if (sqp->ibqp.qp_type == IB_QPT_RC) + send_status = IB_WC_RETRY_EXC_ERR; + else + send_status = IB_WC_SUCCESS; + goto serr; + } + + memset(&wc, 0, sizeof(wc)); + send_status = IB_WC_SUCCESS; + + release = 1; + sqp->s_sge.sge = wqe->sg_list[0]; + sqp->s_sge.sg_list = wqe->sg_list + 1; + sqp->s_sge.num_sge = wqe->wr.num_sge; + sqp->s_len = wqe->length; + switch (wqe->wr.opcode) { + case IB_WR_SEND_WITH_IMM: + wc.wc_flags = IB_WC_WITH_IMM; + wc.ex.imm_data = wqe->wr.ex.imm_data; + /* FALLTHROUGH */ + case IB_WR_SEND: + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) + goto op_err; + if (!ret) + goto rnr_nak; + break; + + case IB_WR_RDMA_WRITE_WITH_IMM: + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE))) + goto inv_err; + wc.wc_flags = IB_WC_WITH_IMM; + wc.ex.imm_data = wqe->wr.ex.imm_data; + ret = hfi1_get_rwqe(qp, 1); + if (ret < 0) + goto op_err; + if (!ret) + goto rnr_nak; + /* FALLTHROUGH */ + case IB_WR_RDMA_WRITE: + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE))) + goto inv_err; + if (wqe->length == 0) + break; + if (unlikely(!hfi1_rkey_ok(qp, &qp->r_sge.sge, wqe->length, + wqe->wr.wr.rdma.remote_addr, + wqe->wr.wr.rdma.rkey, + IB_ACCESS_REMOTE_WRITE))) + goto acc_err; + qp->r_sge.sg_list = NULL; + qp->r_sge.num_sge = 1; + qp->r_sge.total_len = wqe->length; + break; + + case IB_WR_RDMA_READ: + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ))) + goto inv_err; + if (unlikely(!hfi1_rkey_ok(qp, &sqp->s_sge.sge, wqe->length, + wqe->wr.wr.rdma.remote_addr, + wqe->wr.wr.rdma.rkey, + IB_ACCESS_REMOTE_READ))) + goto acc_err; + release = 0; + sqp->s_sge.sg_list = NULL; + sqp->s_sge.num_sge = 1; + qp->r_sge.sge = wqe->sg_list[0]; + qp->r_sge.sg_list = wqe->sg_list + 1; + qp->r_sge.num_sge = wqe->wr.num_sge; + qp->r_sge.total_len = wqe->length; + break; + + case IB_WR_ATOMIC_CMP_AND_SWP: + case IB_WR_ATOMIC_FETCH_AND_ADD: + if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC))) + goto inv_err; + if (unlikely(!hfi1_rkey_ok(qp, &qp->r_sge.sge, sizeof(u64), + wqe->wr.wr.atomic.remote_addr, + wqe->wr.wr.atomic.rkey, + IB_ACCESS_REMOTE_ATOMIC))) + goto acc_err; + /* Perform atomic OP and save result. */ + maddr = (atomic64_t *) qp->r_sge.sge.vaddr; + sdata = wqe->wr.wr.atomic.compare_add; + *(u64 *) sqp->s_sge.sge.vaddr = + (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ? + (u64) atomic64_add_return(sdata, maddr) - sdata : + (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr, + sdata, wqe->wr.wr.atomic.swap); + hfi1_put_mr(qp->r_sge.sge.mr); + qp->r_sge.num_sge = 0; + goto send_comp; + + default: + send_status = IB_WC_LOC_QP_OP_ERR; + goto serr; + } + + sge = &sqp->s_sge.sge; + while (sqp->s_len) { + u32 len = sqp->s_len; + + if (len > sge->length) + len = sge->length; + if (len > sge->sge_length) + len = sge->sge_length; + WARN_ON_ONCE(len == 0); + hfi1_copy_sge(&qp->r_sge, sge->vaddr, len, release); + sge->vaddr += len; + sge->length -= len; + sge->sge_length -= len; + if (sge->sge_length == 0) { + if (!release) + hfi1_put_mr(sge->mr); + if (--sqp->s_sge.num_sge) + *sge = *sqp->s_sge.sg_list++; + } else if (sge->length == 0 && sge->mr->lkey) { + if (++sge->n >= HFI1_SEGSZ) { + if (++sge->m >= sge->mr->mapsz) + break; + sge->n = 0; + } + sge->vaddr = + sge->mr->map[sge->m]->segs[sge->n].vaddr; + sge->length = + sge->mr->map[sge->m]->segs[sge->n].length; + } + sqp->s_len -= len; + } + if (release) + hfi1_put_ss(&qp->r_sge); + + if (!test_and_clear_bit(HFI1_R_WRID_VALID, &qp->r_aflags)) + goto send_comp; + + if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM) + wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; + else + wc.opcode = IB_WC_RECV; + wc.wr_id = qp->r_wr_id; + wc.status = IB_WC_SUCCESS; + wc.byte_len = wqe->length; + wc.qp = &qp->ibqp; + wc.src_qp = qp->remote_qpn; + wc.slid = qp->remote_ah_attr.dlid; + wc.sl = qp->remote_ah_attr.sl; + wc.port_num = 1; + /* Signal completion event if the solicited bit is set. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, + wqe->wr.send_flags & IB_SEND_SOLICITED); + +send_comp: + spin_lock_irqsave(&sqp->s_lock, flags); + ibp->n_loop_pkts++; +flush_send: + sqp->s_rnr_retry = sqp->s_rnr_retry_cnt; + hfi1_send_complete(sqp, wqe, send_status); + goto again; + +rnr_nak: + /* Handle RNR NAK */ + if (qp->ibqp.qp_type == IB_QPT_UC) + goto send_comp; + ibp->n_rnr_naks++; + /* + * Note: we don't need the s_lock held since the BUSY flag + * makes this single threaded. + */ + if (sqp->s_rnr_retry == 0) { + send_status = IB_WC_RNR_RETRY_EXC_ERR; + goto serr; + } + if (sqp->s_rnr_retry_cnt < 7) + sqp->s_rnr_retry--; + spin_lock_irqsave(&sqp->s_lock, flags); + if (!(ib_hfi1_state_ops[sqp->state] & HFI1_PROCESS_RECV_OK)) + goto clr_busy; + sqp->s_flags |= HFI1_S_WAIT_RNR; + sqp->s_timer.function = hfi1_rc_rnr_retry; + sqp->s_timer.expires = jiffies + + usecs_to_jiffies(ib_hfi1_rnr_table[qp->r_min_rnr_timer]); + add_timer(&sqp->s_timer); + goto clr_busy; + +op_err: + send_status = IB_WC_REM_OP_ERR; + wc.status = IB_WC_LOC_QP_OP_ERR; + goto err; + +inv_err: + send_status = IB_WC_REM_INV_REQ_ERR; + wc.status = IB_WC_LOC_QP_OP_ERR; + goto err; + +acc_err: + send_status = IB_WC_REM_ACCESS_ERR; + wc.status = IB_WC_LOC_PROT_ERR; +err: + /* responder goes to error state */ + hfi1_rc_error(qp, wc.status); + +serr: + spin_lock_irqsave(&sqp->s_lock, flags); + hfi1_send_complete(sqp, wqe, send_status); + if (sqp->ibqp.qp_type == IB_QPT_RC) { + int lastwqe = hfi1_error_qp(sqp, IB_WC_WR_FLUSH_ERR); + + sqp->s_flags &= ~HFI1_S_BUSY; + spin_unlock_irqrestore(&sqp->s_lock, flags); + if (lastwqe) { + struct ib_event ev; + + ev.device = sqp->ibqp.device; + ev.element.qp = &sqp->ibqp; + ev.event = IB_EVENT_QP_LAST_WQE_REACHED; + sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context); + } + goto done; + } +clr_busy: + sqp->s_flags &= ~HFI1_S_BUSY; +unlock: + spin_unlock_irqrestore(&sqp->s_lock, flags); +done: + rcu_read_unlock(); +} + +/** + * hfi1_make_grh - construct a GRH header + * @ibp: a pointer to the IB port + * @hdr: a pointer to the GRH header being constructed + * @grh: the global route address to send to + * @hwords: the number of 32 bit words of header being sent + * @nwords: the number of 32 bit words of data being sent + * + * Return the size of the header in 32 bit words. + */ +u32 hfi1_make_grh(struct hfi1_ibport *ibp, struct ib_grh *hdr, + struct ib_global_route *grh, u32 hwords, u32 nwords) +{ + hdr->version_tclass_flow = + cpu_to_be32((IB_GRH_VERSION << IB_GRH_VERSION_SHIFT) | + (grh->traffic_class << IB_GRH_TCLASS_SHIFT) | + (grh->flow_label << IB_GRH_FLOW_SHIFT)); + hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2); + /* next_hdr is defined by C8-7 in ch. 8.4.1 */ + hdr->next_hdr = IB_GRH_NEXT_HDR; + hdr->hop_limit = grh->hop_limit; + /* The SGID is 32-bit aligned. */ + hdr->sgid.global.subnet_prefix = ibp->gid_prefix; + hdr->sgid.global.interface_id = + grh->sgid_index && grh->sgid_index < ARRAY_SIZE(ibp->guids) ? + ibp->guids[grh->sgid_index - 1] : + cpu_to_be64(ppd_from_ibp(ibp)->guid); + hdr->dgid = grh->dgid; + + /* GRH header size in 32-bit words. */ + return sizeof(struct ib_grh) / sizeof(u32); +} + +/* + * free_ahg - clear ahg from QP + */ +void clear_ahg(struct hfi1_qp *qp) +{ + qp->s_hdr->ahgcount = 0; + qp->s_flags &= ~(HFI1_S_AHG_VALID | HFI1_S_AHG_CLEAR); + if (qp->s_sde) + sdma_ahg_free(qp->s_sde, qp->s_ahgidx); + qp->s_ahgidx = -1; + qp->s_sde = NULL; +} + +#define BTH2_OFFSET (offsetof(struct hfi1_pio_header, hdr.u.oth.bth[2]) / 4) + +/** + * build_ahg - create ahg in s_hdr + * @qp: a pointer to QP + * @npsn: the next PSN for the request/response + * + * This routine handles the AHG by allocating an ahg entry and causing the + * copy of the first middle. + * + * Subsequent middles use the copied entry, editing the + * PSN with 1 or 2 edits. + */ +static inline void build_ahg(struct hfi1_qp *qp, u32 npsn) +{ + if (unlikely(qp->s_flags & HFI1_S_AHG_CLEAR)) + clear_ahg(qp); + if (!(qp->s_flags & HFI1_S_AHG_VALID)) { + /* first middle that needs copy */ + if (qp->s_ahgidx < 0) { + if (!qp->s_sde) + qp->s_sde = qp_to_sdma_engine(qp, qp->s_sc); + qp->s_ahgidx = sdma_ahg_alloc(qp->s_sde); + } + if (qp->s_ahgidx >= 0) { + qp->s_ahgpsn = npsn; + qp->s_hdr->tx_flags |= SDMA_TXREQ_F_AHG_COPY; + /* save to protect a change in another thread */ + qp->s_hdr->sde = qp->s_sde; + qp->s_hdr->ahgidx = qp->s_ahgidx; + qp->s_flags |= HFI1_S_AHG_VALID; + } + } else { + /* subsequent middle after valid */ + if (qp->s_ahgidx >= 0) { + qp->s_hdr->tx_flags |= SDMA_TXREQ_F_USE_AHG; + qp->s_hdr->ahgidx = qp->s_ahgidx; + qp->s_hdr->ahgcount++; + qp->s_hdr->ahgdesc[0] = + sdma_build_ahg_descriptor( + (__force u16)cpu_to_be16((u16)npsn), + BTH2_OFFSET, + 16, + 16); + if ((npsn & 0xffff0000) != + (qp->s_ahgpsn & 0xffff0000)) { + qp->s_hdr->ahgcount++; + qp->s_hdr->ahgdesc[1] = + sdma_build_ahg_descriptor( + (__force u16)cpu_to_be16( + (u16)(npsn >> 16)), + BTH2_OFFSET, + 0, + 16); + } + } + } +} + +void hfi1_make_ruc_header(struct hfi1_qp *qp, struct hfi1_other_headers *ohdr, + u32 bth0, u32 bth2, int middle) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + u16 lrh0; + u32 nwords; + u32 extra_bytes; + u8 sc5; + u32 bth1; + + /* Construct the header. */ + extra_bytes = -qp->s_cur_size & 3; + nwords = (qp->s_cur_size + extra_bytes) >> 2; + lrh0 = HFI1_LRH_BTH; + if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) { + qp->s_hdrwords += hfi1_make_grh(ibp, &qp->s_hdr->ibh.u.l.grh, + &qp->remote_ah_attr.grh, + qp->s_hdrwords, nwords); + lrh0 = HFI1_LRH_GRH; + middle = 0; + } + sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + lrh0 |= (sc5 & 0xf) << 12 | (qp->remote_ah_attr.sl & 0xf) << 4; + qp->s_sc = sc5; + /* + * reset s_hdr/AHG fields + * + * This insures that the ahgentry/ahgcount + * are at a non-AHG default to protect + * build_verbs_tx_desc() from using + * an include ahgidx. + * + * build_ahg() will modify as appropriate + * to use the AHG feature. + */ + qp->s_hdr->tx_flags = 0; + qp->s_hdr->ahgcount = 0; + qp->s_hdr->ahgidx = 0; + qp->s_hdr->sde = NULL; + if (qp->s_mig_state == IB_MIG_MIGRATED) + bth0 |= IB_BTH_MIG_REQ; + else + middle = 0; + if (middle) + build_ahg(qp, bth2); + else + qp->s_flags &= ~HFI1_S_AHG_VALID; + qp->s_hdr->ibh.lrh[0] = cpu_to_be16(lrh0); + qp->s_hdr->ibh.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid); + qp->s_hdr->ibh.lrh[2] = + cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC); + qp->s_hdr->ibh.lrh[3] = cpu_to_be16(ppd_from_ibp(ibp)->lid | + qp->remote_ah_attr.src_path_bits); + bth0 |= hfi1_get_pkey(ibp, qp->s_pkey_index); + bth0 |= extra_bytes << 20; + ohdr->bth[0] = cpu_to_be32(bth0); + bth1 = qp->remote_qpn; + if (qp->s_flags & HFI1_S_ECN) { + qp->s_flags &= ~HFI1_S_ECN; + /* we recently received a FECN, so return a BECN */ + bth1 |= (HFI1_BECN_MASK << HFI1_BECN_SHIFT); + } + ohdr->bth[1] = cpu_to_be32(bth1); + ohdr->bth[2] = cpu_to_be32(bth2); +} + +/** + * hfi1_do_send - perform a send on a QP + * @work: contains a pointer to the QP + * + * Process entries in the send work queue until credit or queue is + * exhausted. Only allow one CPU to send a packet per QP (tasklet). + * Otherwise, two threads could send packets out of order. + */ +void hfi1_do_send(struct work_struct *work) +{ + struct iowait *wait = container_of(work, struct iowait, iowork); + struct hfi1_qp *qp = container_of(wait, struct hfi1_qp, s_iowait); + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + int (*make_req)(struct hfi1_qp *qp); + unsigned long flags; + + if ((qp->ibqp.qp_type == IB_QPT_RC || + qp->ibqp.qp_type == IB_QPT_UC) && + !loopback && + (qp->remote_ah_attr.dlid & ~((1 << ppd->lmc) - 1)) == ppd->lid) { + ruc_loopback(qp); + return; + } + + if (qp->ibqp.qp_type == IB_QPT_RC) + make_req = hfi1_make_rc_req; + else if (qp->ibqp.qp_type == IB_QPT_UC) + make_req = hfi1_make_uc_req; + else + make_req = hfi1_make_ud_req; + + spin_lock_irqsave(&qp->s_lock, flags); + + /* Return if we are already busy processing a work request. */ + if (!hfi1_send_ok(qp)) { + spin_unlock_irqrestore(&qp->s_lock, flags); + return; + } + + qp->s_flags |= HFI1_S_BUSY; + + spin_unlock_irqrestore(&qp->s_lock, flags); + + do { + /* Check for a constructed packet to be sent. */ + if (qp->s_hdrwords != 0) { + /* + * If the packet cannot be sent now, return and + * the send tasklet will be woken up later. + */ + if (hfi1_verbs_send(qp, qp->s_hdr, qp->s_hdrwords, + qp->s_cur_sge, qp->s_cur_size)) + break; + /* Record that s_hdr is empty. */ + qp->s_hdrwords = 0; + } + } while (make_req(qp)); +} + +/* + * This should be called with s_lock held. + */ +void hfi1_send_complete(struct hfi1_qp *qp, struct hfi1_swqe *wqe, + enum ib_wc_status status) +{ + u32 old_last, last; + unsigned i; + + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_OR_FLUSH_SEND)) + return; + + for (i = 0; i < wqe->wr.num_sge; i++) { + struct hfi1_sge *sge = &wqe->sg_list[i]; + + hfi1_put_mr(sge->mr); + } + if (qp->ibqp.qp_type == IB_QPT_UD || + qp->ibqp.qp_type == IB_QPT_SMI || + qp->ibqp.qp_type == IB_QPT_GSI) + atomic_dec(&to_iah(wqe->wr.wr.ud.ah)->refcount); + + /* See ch. 11.2.4.1 and 10.7.3.1 */ + if (!(qp->s_flags & HFI1_S_SIGNAL_REQ_WR) || + (wqe->wr.send_flags & IB_SEND_SIGNALED) || + status != IB_WC_SUCCESS) { + struct ib_wc wc; + + memset(&wc, 0, sizeof(wc)); + wc.wr_id = wqe->wr.wr_id; + wc.status = status; + wc.opcode = ib_hfi1_wc_opcode[wqe->wr.opcode]; + wc.qp = &qp->ibqp; + if (status == IB_WC_SUCCESS) + wc.byte_len = wqe->length; + hfi1_cq_enter(to_icq(qp->ibqp.send_cq), &wc, + status != IB_WC_SUCCESS); + } + + last = qp->s_last; + old_last = last; + if (++last >= qp->s_size) + last = 0; + qp->s_last = last; + if (qp->s_acked == old_last) + qp->s_acked = last; + if (qp->s_cur == old_last) + qp->s_cur = last; + if (qp->s_tail == old_last) + qp->s_tail = last; + if (qp->state == IB_QPS_SQD && last == qp->s_cur) + qp->s_draining = 0; +} diff --git a/drivers/staging/rdma/hfi1/sdma.c b/drivers/staging/rdma/hfi1/sdma.c new file mode 100644 index 000000000000..37bd767d6bc0 --- /dev/null +++ b/drivers/staging/rdma/hfi1/sdma.c @@ -0,0 +1,2962 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/spinlock.h> +#include <linux/seqlock.h> +#include <linux/netdevice.h> +#include <linux/moduleparam.h> +#include <linux/bitops.h> +#include <linux/timer.h> +#include <linux/vmalloc.h> + +#include "hfi.h" +#include "common.h" +#include "qp.h" +#include "sdma.h" +#include "iowait.h" +#include "trace.h" + +/* must be a power of 2 >= 64 <= 32768 */ +#define SDMA_DESCQ_CNT 1024 +#define INVALID_TAIL 0xffff + +static uint sdma_descq_cnt = SDMA_DESCQ_CNT; +module_param(sdma_descq_cnt, uint, S_IRUGO); +MODULE_PARM_DESC(sdma_descq_cnt, "Number of SDMA descq entries"); + +static uint sdma_idle_cnt = 250; +module_param(sdma_idle_cnt, uint, S_IRUGO); +MODULE_PARM_DESC(sdma_idle_cnt, "sdma interrupt idle delay (ns,default 250)"); + +uint mod_num_sdma; +module_param_named(num_sdma, mod_num_sdma, uint, S_IRUGO); +MODULE_PARM_DESC(num_sdma, "Set max number SDMA engines to use"); + +#define SDMA_WAIT_BATCH_SIZE 20 +/* max wait time for a SDMA engine to indicate it has halted */ +#define SDMA_ERR_HALT_TIMEOUT 10 /* ms */ +/* all SDMA engine errors that cause a halt */ + +#define SD(name) SEND_DMA_##name +#define ALL_SDMA_ENG_HALT_ERRS \ + (SD(ENG_ERR_STATUS_SDMA_WRONG_DW_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_GEN_MISMATCH_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_TOO_LONG_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_TAIL_OUT_OF_BOUNDS_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_FIRST_DESC_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_MEM_READ_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_LENGTH_MISMATCH_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_PACKET_DESC_OVERFLOW_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HEADER_SELECT_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HEADER_ADDRESS_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HEADER_LENGTH_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_TIMEOUT_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_DESC_TABLE_UNC_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_ASSEMBLY_UNC_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_PACKET_TRACKING_UNC_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HEADER_STORAGE_UNC_ERR_SMASK) \ + | SD(ENG_ERR_STATUS_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SMASK)) + +/* sdma_sendctrl operations */ +#define SDMA_SENDCTRL_OP_ENABLE (1U << 0) +#define SDMA_SENDCTRL_OP_INTENABLE (1U << 1) +#define SDMA_SENDCTRL_OP_HALT (1U << 2) +#define SDMA_SENDCTRL_OP_CLEANUP (1U << 3) + +/* handle long defines */ +#define SDMA_EGRESS_PACKET_OCCUPANCY_SMASK \ +SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SMASK +#define SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT \ +SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT + +static const char * const sdma_state_names[] = { + [sdma_state_s00_hw_down] = "s00_HwDown", + [sdma_state_s10_hw_start_up_halt_wait] = "s10_HwStartUpHaltWait", + [sdma_state_s15_hw_start_up_clean_wait] = "s15_HwStartUpCleanWait", + [sdma_state_s20_idle] = "s20_Idle", + [sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait", + [sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait", + [sdma_state_s50_hw_halt_wait] = "s50_HwHaltWait", + [sdma_state_s60_idle_halt_wait] = "s60_IdleHaltWait", + [sdma_state_s80_hw_freeze] = "s80_HwFreeze", + [sdma_state_s82_freeze_sw_clean] = "s82_FreezeSwClean", + [sdma_state_s99_running] = "s99_Running", +}; + +static const char * const sdma_event_names[] = { + [sdma_event_e00_go_hw_down] = "e00_GoHwDown", + [sdma_event_e10_go_hw_start] = "e10_GoHwStart", + [sdma_event_e15_hw_halt_done] = "e15_HwHaltDone", + [sdma_event_e25_hw_clean_up_done] = "e25_HwCleanUpDone", + [sdma_event_e30_go_running] = "e30_GoRunning", + [sdma_event_e40_sw_cleaned] = "e40_SwCleaned", + [sdma_event_e50_hw_cleaned] = "e50_HwCleaned", + [sdma_event_e60_hw_halted] = "e60_HwHalted", + [sdma_event_e70_go_idle] = "e70_GoIdle", + [sdma_event_e80_hw_freeze] = "e80_HwFreeze", + [sdma_event_e81_hw_frozen] = "e81_HwFrozen", + [sdma_event_e82_hw_unfreeze] = "e82_HwUnfreeze", + [sdma_event_e85_link_down] = "e85_LinkDown", + [sdma_event_e90_sw_halted] = "e90_SwHalted", +}; + +static const struct sdma_set_state_action sdma_action_table[] = { + [sdma_state_s00_hw_down] = { + .go_s99_running_tofalse = 1, + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s10_hw_start_up_halt_wait] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 1, + .op_cleanup = 0, + }, + [sdma_state_s15_hw_start_up_clean_wait] = { + .op_enable = 0, + .op_intenable = 1, + .op_halt = 0, + .op_cleanup = 1, + }, + [sdma_state_s20_idle] = { + .op_enable = 0, + .op_intenable = 1, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s30_sw_clean_up_wait] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s40_hw_clean_up_wait] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 1, + }, + [sdma_state_s50_hw_halt_wait] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s60_idle_halt_wait] = { + .go_s99_running_tofalse = 1, + .op_enable = 0, + .op_intenable = 0, + .op_halt = 1, + .op_cleanup = 0, + }, + [sdma_state_s80_hw_freeze] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s82_freeze_sw_clean] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_cleanup = 0, + }, + [sdma_state_s99_running] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 0, + .op_cleanup = 0, + .go_s99_running_totrue = 1, + }, +}; + +#define SDMA_TAIL_UPDATE_THRESH 0x1F + +/* declare all statics here rather than keep sorting */ +static void sdma_complete(struct kref *); +static void sdma_finalput(struct sdma_state *); +static void sdma_get(struct sdma_state *); +static void sdma_hw_clean_up_task(unsigned long); +static void sdma_put(struct sdma_state *); +static void sdma_set_state(struct sdma_engine *, enum sdma_states); +static void sdma_start_hw_clean_up(struct sdma_engine *); +static void sdma_start_sw_clean_up(struct sdma_engine *); +static void sdma_sw_clean_up_task(unsigned long); +static void sdma_sendctrl(struct sdma_engine *, unsigned); +static void init_sdma_regs(struct sdma_engine *, u32, uint); +static void sdma_process_event( + struct sdma_engine *sde, + enum sdma_events event); +static void __sdma_process_event( + struct sdma_engine *sde, + enum sdma_events event); +static void dump_sdma_state(struct sdma_engine *sde); +static void sdma_make_progress(struct sdma_engine *sde, u64 status); +static void sdma_desc_avail(struct sdma_engine *sde, unsigned avail); +static void sdma_flush_descq(struct sdma_engine *sde); + +/** + * sdma_state_name() - return state string from enum + * @state: state + */ +static const char *sdma_state_name(enum sdma_states state) +{ + return sdma_state_names[state]; +} + +static void sdma_get(struct sdma_state *ss) +{ + kref_get(&ss->kref); +} + +static void sdma_complete(struct kref *kref) +{ + struct sdma_state *ss = + container_of(kref, struct sdma_state, kref); + + complete(&ss->comp); +} + +static void sdma_put(struct sdma_state *ss) +{ + kref_put(&ss->kref, sdma_complete); +} + +static void sdma_finalput(struct sdma_state *ss) +{ + sdma_put(ss); + wait_for_completion(&ss->comp); +} + +static inline void write_sde_csr( + struct sdma_engine *sde, + u32 offset0, + u64 value) +{ + write_kctxt_csr(sde->dd, sde->this_idx, offset0, value); +} + +static inline u64 read_sde_csr( + struct sdma_engine *sde, + u32 offset0) +{ + return read_kctxt_csr(sde->dd, sde->this_idx, offset0); +} + +/* + * sdma_wait_for_packet_egress() - wait for the VL FIFO occupancy for + * sdma engine 'sde' to drop to 0. + */ +static void sdma_wait_for_packet_egress(struct sdma_engine *sde, + int pause) +{ + u64 off = 8 * sde->this_idx; + struct hfi1_devdata *dd = sde->dd; + int lcnt = 0; + + while (1) { + u64 reg = read_csr(dd, off + SEND_EGRESS_SEND_DMA_STATUS); + + reg &= SDMA_EGRESS_PACKET_OCCUPANCY_SMASK; + reg >>= SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT; + if (reg == 0) + break; + if (lcnt++ > 100) { + dd_dev_err(dd, "%s: engine %u timeout waiting for packets to egress, remaining count %u\n", + __func__, sde->this_idx, (u32)reg); + break; + } + udelay(1); + } +} + +/* + * sdma_wait() - wait for packet egress to complete for all SDMA engines, + * and pause for credit return. + */ +void sdma_wait(struct hfi1_devdata *dd) +{ + int i; + + for (i = 0; i < dd->num_sdma; i++) { + struct sdma_engine *sde = &dd->per_sdma[i]; + + sdma_wait_for_packet_egress(sde, 0); + } +} + +static inline void sdma_set_desc_cnt(struct sdma_engine *sde, unsigned cnt) +{ + u64 reg; + + if (!(sde->dd->flags & HFI1_HAS_SDMA_TIMEOUT)) + return; + reg = cnt; + reg &= SD(DESC_CNT_CNT_MASK); + reg <<= SD(DESC_CNT_CNT_SHIFT); + write_sde_csr(sde, SD(DESC_CNT), reg); +} + +/* + * Complete all the sdma requests with a SDMA_TXREQ_S_ABORTED status + * + * Depending on timing there can be txreqs in two places: + * - in the descq ring + * - in the flush list + * + * To avoid ordering issues the descq ring needs to be flushed + * first followed by the flush list. + * + * This routine is called from two places + * - From a work queue item + * - Directly from the state machine just before setting the + * state to running + * + * Must be called with head_lock held + * + */ +static void sdma_flush(struct sdma_engine *sde) +{ + struct sdma_txreq *txp, *txp_next; + LIST_HEAD(flushlist); + + /* flush from head to tail */ + sdma_flush_descq(sde); + spin_lock(&sde->flushlist_lock); + /* copy flush list */ + list_for_each_entry_safe(txp, txp_next, &sde->flushlist, list) { + list_del_init(&txp->list); + list_add_tail(&txp->list, &flushlist); + } + spin_unlock(&sde->flushlist_lock); + /* flush from flush list */ + list_for_each_entry_safe(txp, txp_next, &flushlist, list) { + int drained = 0; + /* protect against complete modifying */ + struct iowait *wait = txp->wait; + + list_del_init(&txp->list); +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + trace_hfi1_sdma_out_sn(sde, txp->sn); + if (WARN_ON_ONCE(sde->head_sn != txp->sn)) + dd_dev_err(sde->dd, "expected %llu got %llu\n", + sde->head_sn, txp->sn); + sde->head_sn++; +#endif + sdma_txclean(sde->dd, txp); + if (wait) + drained = atomic_dec_and_test(&wait->sdma_busy); + if (txp->complete) + (*txp->complete)(txp, SDMA_TXREQ_S_ABORTED, drained); + if (wait && drained) + iowait_drain_wakeup(wait); + } +} + +/* + * Fields a work request for flushing the descq ring + * and the flush list + * + * If the engine has been brought to running during + * the scheduling delay, the flush is ignored, assuming + * that the process of bringing the engine to running + * would have done this flush prior to going to running. + * + */ +static void sdma_field_flush(struct work_struct *work) +{ + unsigned long flags; + struct sdma_engine *sde = + container_of(work, struct sdma_engine, flush_worker); + + write_seqlock_irqsave(&sde->head_lock, flags); + if (!__sdma_running(sde)) + sdma_flush(sde); + write_sequnlock_irqrestore(&sde->head_lock, flags); +} + +static void sdma_err_halt_wait(struct work_struct *work) +{ + struct sdma_engine *sde = container_of(work, struct sdma_engine, + err_halt_worker); + u64 statuscsr; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(SDMA_ERR_HALT_TIMEOUT); + while (1) { + statuscsr = read_sde_csr(sde, SD(STATUS)); + statuscsr &= SD(STATUS_ENG_HALTED_SMASK); + if (statuscsr) + break; + if (time_after(jiffies, timeout)) { + dd_dev_err(sde->dd, + "SDMA engine %d - timeout waiting for engine to halt\n", + sde->this_idx); + /* + * Continue anyway. This could happen if there was + * an uncorrectable error in the wrong spot. + */ + break; + } + usleep_range(80, 120); + } + + sdma_process_event(sde, sdma_event_e15_hw_halt_done); +} + +static void sdma_start_err_halt_wait(struct sdma_engine *sde) +{ + schedule_work(&sde->err_halt_worker); +} + + +static void sdma_err_progress_check_schedule(struct sdma_engine *sde) +{ + if (!is_bx(sde->dd) && HFI1_CAP_IS_KSET(SDMA_AHG)) { + + unsigned index; + struct hfi1_devdata *dd = sde->dd; + + for (index = 0; index < dd->num_sdma; index++) { + struct sdma_engine *curr_sdma = &dd->per_sdma[index]; + + if (curr_sdma != sde) + curr_sdma->progress_check_head = + curr_sdma->descq_head; + } + dd_dev_err(sde->dd, + "SDMA engine %d - check scheduled\n", + sde->this_idx); + mod_timer(&sde->err_progress_check_timer, jiffies + 10); + } +} + +static void sdma_err_progress_check(unsigned long data) +{ + unsigned index; + struct sdma_engine *sde = (struct sdma_engine *)data; + + dd_dev_err(sde->dd, "SDE progress check event\n"); + for (index = 0; index < sde->dd->num_sdma; index++) { + struct sdma_engine *curr_sde = &sde->dd->per_sdma[index]; + unsigned long flags; + + /* check progress on each engine except the current one */ + if (curr_sde == sde) + continue; + /* + * We must lock interrupts when acquiring sde->lock, + * to avoid a deadlock if interrupt triggers and spins on + * the same lock on same CPU + */ + spin_lock_irqsave(&curr_sde->tail_lock, flags); + write_seqlock(&curr_sde->head_lock); + + /* skip non-running queues */ + if (curr_sde->state.current_state != sdma_state_s99_running) { + write_sequnlock(&curr_sde->head_lock); + spin_unlock_irqrestore(&curr_sde->tail_lock, flags); + continue; + } + + if ((curr_sde->descq_head != curr_sde->descq_tail) && + (curr_sde->descq_head == + curr_sde->progress_check_head)) + __sdma_process_event(curr_sde, + sdma_event_e90_sw_halted); + write_sequnlock(&curr_sde->head_lock); + spin_unlock_irqrestore(&curr_sde->tail_lock, flags); + } + schedule_work(&sde->err_halt_worker); +} + +static void sdma_hw_clean_up_task(unsigned long opaque) +{ + struct sdma_engine *sde = (struct sdma_engine *) opaque; + u64 statuscsr; + + while (1) { +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", + sde->this_idx, slashstrip(__FILE__), __LINE__, + __func__); +#endif + statuscsr = read_sde_csr(sde, SD(STATUS)); + statuscsr &= SD(STATUS_ENG_CLEANED_UP_SMASK); + if (statuscsr) + break; + udelay(10); + } + + sdma_process_event(sde, sdma_event_e25_hw_clean_up_done); +} + +static inline struct sdma_txreq *get_txhead(struct sdma_engine *sde) +{ + smp_read_barrier_depends(); /* see sdma_update_tail() */ + return sde->tx_ring[sde->tx_head & sde->sdma_mask]; +} + +/* + * flush ring for recovery + */ +static void sdma_flush_descq(struct sdma_engine *sde) +{ + u16 head, tail; + int progress = 0; + struct sdma_txreq *txp = get_txhead(sde); + + /* The reason for some of the complexity of this code is that + * not all descriptors have corresponding txps. So, we have to + * be able to skip over descs until we wander into the range of + * the next txp on the list. + */ + head = sde->descq_head & sde->sdma_mask; + tail = sde->descq_tail & sde->sdma_mask; + while (head != tail) { + /* advance head, wrap if needed */ + head = ++sde->descq_head & sde->sdma_mask; + /* if now past this txp's descs, do the callback */ + if (txp && txp->next_descq_idx == head) { + int drained = 0; + /* protect against complete modifying */ + struct iowait *wait = txp->wait; + + /* remove from list */ + sde->tx_ring[sde->tx_head++ & sde->sdma_mask] = NULL; + if (wait) + drained = atomic_dec_and_test(&wait->sdma_busy); +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + trace_hfi1_sdma_out_sn(sde, txp->sn); + if (WARN_ON_ONCE(sde->head_sn != txp->sn)) + dd_dev_err(sde->dd, "expected %llu got %llu\n", + sde->head_sn, txp->sn); + sde->head_sn++; +#endif + sdma_txclean(sde->dd, txp); + trace_hfi1_sdma_progress(sde, head, tail, txp); + if (txp->complete) + (*txp->complete)( + txp, + SDMA_TXREQ_S_ABORTED, + drained); + if (wait && drained) + iowait_drain_wakeup(wait); + /* see if there is another txp */ + txp = get_txhead(sde); + } + progress++; + } + if (progress) + sdma_desc_avail(sde, sdma_descq_freecnt(sde)); +} + +static void sdma_sw_clean_up_task(unsigned long opaque) +{ + struct sdma_engine *sde = (struct sdma_engine *) opaque; + unsigned long flags; + + spin_lock_irqsave(&sde->tail_lock, flags); + write_seqlock(&sde->head_lock); + + /* + * At this point, the following should always be true: + * - We are halted, so no more descriptors are getting retired. + * - We are not running, so no one is submitting new work. + * - Only we can send the e40_sw_cleaned, so we can't start + * running again until we say so. So, the active list and + * descq are ours to play with. + */ + + + /* + * In the error clean up sequence, software clean must be called + * before the hardware clean so we can use the hardware head in + * the progress routine. A hardware clean or SPC unfreeze will + * reset the hardware head. + * + * Process all retired requests. The progress routine will use the + * latest physical hardware head - we are not running so speed does + * not matter. + */ + sdma_make_progress(sde, 0); + + sdma_flush(sde); + + /* + * Reset our notion of head and tail. + * Note that the HW registers have been reset via an earlier + * clean up. + */ + sde->descq_tail = 0; + sde->descq_head = 0; + sde->desc_avail = sdma_descq_freecnt(sde); + *sde->head_dma = 0; + + __sdma_process_event(sde, sdma_event_e40_sw_cleaned); + + write_sequnlock(&sde->head_lock); + spin_unlock_irqrestore(&sde->tail_lock, flags); +} + +static void sdma_sw_tear_down(struct sdma_engine *sde) +{ + struct sdma_state *ss = &sde->state; + + /* Releasing this reference means the state machine has stopped. */ + sdma_put(ss); + + /* stop waiting for all unfreeze events to complete */ + atomic_set(&sde->dd->sdma_unfreeze_count, -1); + wake_up_interruptible(&sde->dd->sdma_unfreeze_wq); +} + +static void sdma_start_hw_clean_up(struct sdma_engine *sde) +{ + tasklet_hi_schedule(&sde->sdma_hw_clean_up_task); +} + +static void sdma_start_sw_clean_up(struct sdma_engine *sde) +{ + tasklet_hi_schedule(&sde->sdma_sw_clean_up_task); +} + +static void sdma_set_state(struct sdma_engine *sde, + enum sdma_states next_state) +{ + struct sdma_state *ss = &sde->state; + const struct sdma_set_state_action *action = sdma_action_table; + unsigned op = 0; + + trace_hfi1_sdma_state( + sde, + sdma_state_names[ss->current_state], + sdma_state_names[next_state]); + + /* debugging bookkeeping */ + ss->previous_state = ss->current_state; + ss->previous_op = ss->current_op; + ss->current_state = next_state; + + if (ss->previous_state != sdma_state_s99_running + && next_state == sdma_state_s99_running) + sdma_flush(sde); + + if (action[next_state].op_enable) + op |= SDMA_SENDCTRL_OP_ENABLE; + + if (action[next_state].op_intenable) + op |= SDMA_SENDCTRL_OP_INTENABLE; + + if (action[next_state].op_halt) + op |= SDMA_SENDCTRL_OP_HALT; + + if (action[next_state].op_cleanup) + op |= SDMA_SENDCTRL_OP_CLEANUP; + + if (action[next_state].go_s99_running_tofalse) + ss->go_s99_running = 0; + + if (action[next_state].go_s99_running_totrue) + ss->go_s99_running = 1; + + ss->current_op = op; + sdma_sendctrl(sde, ss->current_op); +} + +/** + * sdma_get_descq_cnt() - called when device probed + * + * Return a validated descq count. + * + * This is currently only used in the verbs initialization to build the tx + * list. + * + * This will probably be deleted in favor of a more scalable approach to + * alloc tx's. + * + */ +u16 sdma_get_descq_cnt(void) +{ + u16 count = sdma_descq_cnt; + + if (!count) + return SDMA_DESCQ_CNT; + /* count must be a power of 2 greater than 64 and less than + * 32768. Otherwise return default. + */ + if (!is_power_of_2(count)) + return SDMA_DESCQ_CNT; + if (count < 64 && count > 32768) + return SDMA_DESCQ_CNT; + return count; +} +/** + * sdma_select_engine_vl() - select sdma engine + * @dd: devdata + * @selector: a spreading factor + * @vl: this vl + * + * + * This function returns an engine based on the selector and a vl. The + * mapping fields are protected by RCU. + */ +struct sdma_engine *sdma_select_engine_vl( + struct hfi1_devdata *dd, + u32 selector, + u8 vl) +{ + struct sdma_vl_map *m; + struct sdma_map_elem *e; + struct sdma_engine *rval; + + if (WARN_ON(vl > 8)) + return NULL; + + rcu_read_lock(); + m = rcu_dereference(dd->sdma_map); + if (unlikely(!m)) { + rcu_read_unlock(); + return NULL; + } + e = m->map[vl & m->mask]; + rval = e->sde[selector & e->mask]; + rcu_read_unlock(); + + trace_hfi1_sdma_engine_select(dd, selector, vl, rval->this_idx); + return rval; +} + +/** + * sdma_select_engine_sc() - select sdma engine + * @dd: devdata + * @selector: a spreading factor + * @sc5: the 5 bit sc + * + * + * This function returns an engine based on the selector and an sc. + */ +struct sdma_engine *sdma_select_engine_sc( + struct hfi1_devdata *dd, + u32 selector, + u8 sc5) +{ + u8 vl = sc_to_vlt(dd, sc5); + + return sdma_select_engine_vl(dd, selector, vl); +} + +/* + * Free the indicated map struct + */ +static void sdma_map_free(struct sdma_vl_map *m) +{ + int i; + + for (i = 0; m && i < m->actual_vls; i++) + kfree(m->map[i]); + kfree(m); +} + +/* + * Handle RCU callback + */ +static void sdma_map_rcu_callback(struct rcu_head *list) +{ + struct sdma_vl_map *m = container_of(list, struct sdma_vl_map, list); + + sdma_map_free(m); +} + +/** + * sdma_map_init - called when # vls change + * @dd: hfi1_devdata + * @port: port number + * @num_vls: number of vls + * @vl_engines: per vl engine mapping (optional) + * + * This routine changes the mapping based on the number of vls. + * + * vl_engines is used to specify a non-uniform vl/engine loading. NULL + * implies auto computing the loading and giving each VLs a uniform + * distribution of engines per VL. + * + * The auto algorithm computes the sde_per_vl and the number of extra + * engines. Any extra engines are added from the last VL on down. + * + * rcu locking is used here to control access to the mapping fields. + * + * If either the num_vls or num_sdma are non-power of 2, the array sizes + * in the struct sdma_vl_map and the struct sdma_map_elem are rounded + * up to the next highest power of 2 and the first entry is reused + * in a round robin fashion. + * + * If an error occurs the map change is not done and the mapping is + * not changed. + * + */ +int sdma_map_init(struct hfi1_devdata *dd, u8 port, u8 num_vls, u8 *vl_engines) +{ + int i, j; + int extra, sde_per_vl; + int engine = 0; + u8 lvl_engines[OPA_MAX_VLS]; + struct sdma_vl_map *oldmap, *newmap; + + if (!(dd->flags & HFI1_HAS_SEND_DMA)) + return 0; + + if (!vl_engines) { + /* truncate divide */ + sde_per_vl = dd->num_sdma / num_vls; + /* extras */ + extra = dd->num_sdma % num_vls; + vl_engines = lvl_engines; + /* add extras from last vl down */ + for (i = num_vls - 1; i >= 0; i--, extra--) + vl_engines[i] = sde_per_vl + (extra > 0 ? 1 : 0); + } + /* build new map */ + newmap = kzalloc( + sizeof(struct sdma_vl_map) + + roundup_pow_of_two(num_vls) * + sizeof(struct sdma_map_elem *), + GFP_KERNEL); + if (!newmap) + goto bail; + newmap->actual_vls = num_vls; + newmap->vls = roundup_pow_of_two(num_vls); + newmap->mask = (1 << ilog2(newmap->vls)) - 1; + for (i = 0; i < newmap->vls; i++) { + /* save for wrap around */ + int first_engine = engine; + + if (i < newmap->actual_vls) { + int sz = roundup_pow_of_two(vl_engines[i]); + + /* only allocate once */ + newmap->map[i] = kzalloc( + sizeof(struct sdma_map_elem) + + sz * sizeof(struct sdma_engine *), + GFP_KERNEL); + if (!newmap->map[i]) + goto bail; + newmap->map[i]->mask = (1 << ilog2(sz)) - 1; + /* assign engines */ + for (j = 0; j < sz; j++) { + newmap->map[i]->sde[j] = + &dd->per_sdma[engine]; + if (++engine >= first_engine + vl_engines[i]) + /* wrap back to first engine */ + engine = first_engine; + } + } else { + /* just re-use entry without allocating */ + newmap->map[i] = newmap->map[i % num_vls]; + } + engine = first_engine + vl_engines[i]; + } + /* newmap in hand, save old map */ + spin_lock_irq(&dd->sde_map_lock); + oldmap = rcu_dereference_protected(dd->sdma_map, + lockdep_is_held(&dd->sde_map_lock)); + + /* publish newmap */ + rcu_assign_pointer(dd->sdma_map, newmap); + + spin_unlock_irq(&dd->sde_map_lock); + /* success, free any old map after grace period */ + if (oldmap) + call_rcu(&oldmap->list, sdma_map_rcu_callback); + return 0; +bail: + /* free any partial allocation */ + sdma_map_free(newmap); + return -ENOMEM; +} + +/* + * Clean up allocated memory. + * + * This routine is can be called regardless of the success of sdma_init() + * + */ +static void sdma_clean(struct hfi1_devdata *dd, size_t num_engines) +{ + size_t i; + struct sdma_engine *sde; + + if (dd->sdma_pad_dma) { + dma_free_coherent(&dd->pcidev->dev, 4, + (void *)dd->sdma_pad_dma, + dd->sdma_pad_phys); + dd->sdma_pad_dma = NULL; + dd->sdma_pad_phys = 0; + } + if (dd->sdma_heads_dma) { + dma_free_coherent(&dd->pcidev->dev, dd->sdma_heads_size, + (void *)dd->sdma_heads_dma, + dd->sdma_heads_phys); + dd->sdma_heads_dma = NULL; + dd->sdma_heads_phys = 0; + } + for (i = 0; dd->per_sdma && i < num_engines; ++i) { + sde = &dd->per_sdma[i]; + + sde->head_dma = NULL; + sde->head_phys = 0; + + if (sde->descq) { + dma_free_coherent( + &dd->pcidev->dev, + sde->descq_cnt * sizeof(u64[2]), + sde->descq, + sde->descq_phys + ); + sde->descq = NULL; + sde->descq_phys = 0; + } + if (is_vmalloc_addr(sde->tx_ring)) + vfree(sde->tx_ring); + else + kfree(sde->tx_ring); + sde->tx_ring = NULL; + } + spin_lock_irq(&dd->sde_map_lock); + kfree(rcu_access_pointer(dd->sdma_map)); + RCU_INIT_POINTER(dd->sdma_map, NULL); + spin_unlock_irq(&dd->sde_map_lock); + synchronize_rcu(); + kfree(dd->per_sdma); + dd->per_sdma = NULL; +} + +/** + * sdma_init() - called when device probed + * @dd: hfi1_devdata + * @port: port number (currently only zero) + * + * sdma_init initializes the specified number of engines. + * + * The code initializes each sde, its csrs. Interrupts + * are not required to be enabled. + * + * Returns: + * 0 - success, -errno on failure + */ +int sdma_init(struct hfi1_devdata *dd, u8 port) +{ + unsigned this_idx; + struct sdma_engine *sde; + u16 descq_cnt; + void *curr_head; + struct hfi1_pportdata *ppd = dd->pport + port; + u32 per_sdma_credits; + uint idle_cnt = sdma_idle_cnt; + size_t num_engines = dd->chip_sdma_engines; + + if (!HFI1_CAP_IS_KSET(SDMA)) { + HFI1_CAP_CLEAR(SDMA_AHG); + return 0; + } + if (mod_num_sdma && + /* can't exceed chip support */ + mod_num_sdma <= dd->chip_sdma_engines && + /* count must be >= vls */ + mod_num_sdma >= num_vls) + num_engines = mod_num_sdma; + + dd_dev_info(dd, "SDMA mod_num_sdma: %u\n", mod_num_sdma); + dd_dev_info(dd, "SDMA chip_sdma_engines: %u\n", dd->chip_sdma_engines); + dd_dev_info(dd, "SDMA chip_sdma_mem_size: %u\n", + dd->chip_sdma_mem_size); + + per_sdma_credits = + dd->chip_sdma_mem_size/(num_engines * SDMA_BLOCK_SIZE); + + /* set up freeze waitqueue */ + init_waitqueue_head(&dd->sdma_unfreeze_wq); + atomic_set(&dd->sdma_unfreeze_count, 0); + + descq_cnt = sdma_get_descq_cnt(); + dd_dev_info(dd, "SDMA engines %zu descq_cnt %u\n", + num_engines, descq_cnt); + + /* alloc memory for array of send engines */ + dd->per_sdma = kcalloc(num_engines, sizeof(*dd->per_sdma), GFP_KERNEL); + if (!dd->per_sdma) + return -ENOMEM; + + idle_cnt = ns_to_cclock(dd, idle_cnt); + /* Allocate memory for SendDMA descriptor FIFOs */ + for (this_idx = 0; this_idx < num_engines; ++this_idx) { + sde = &dd->per_sdma[this_idx]; + sde->dd = dd; + sde->ppd = ppd; + sde->this_idx = this_idx; + sde->descq_cnt = descq_cnt; + sde->desc_avail = sdma_descq_freecnt(sde); + sde->sdma_shift = ilog2(descq_cnt); + sde->sdma_mask = (1 << sde->sdma_shift) - 1; + sde->descq_full_count = 0; + + /* Create a mask for all 3 chip interrupt sources */ + sde->imask = (u64)1 << (0*TXE_NUM_SDMA_ENGINES + this_idx) + | (u64)1 << (1*TXE_NUM_SDMA_ENGINES + this_idx) + | (u64)1 << (2*TXE_NUM_SDMA_ENGINES + this_idx); + /* Create a mask specifically for sdma_idle */ + sde->idle_mask = + (u64)1 << (2*TXE_NUM_SDMA_ENGINES + this_idx); + /* Create a mask specifically for sdma_progress */ + sde->progress_mask = + (u64)1 << (TXE_NUM_SDMA_ENGINES + this_idx); + spin_lock_init(&sde->tail_lock); + seqlock_init(&sde->head_lock); + spin_lock_init(&sde->senddmactrl_lock); + spin_lock_init(&sde->flushlist_lock); + /* insure there is always a zero bit */ + sde->ahg_bits = 0xfffffffe00000000ULL; + + sdma_set_state(sde, sdma_state_s00_hw_down); + + /* set up reference counting */ + kref_init(&sde->state.kref); + init_completion(&sde->state.comp); + + INIT_LIST_HEAD(&sde->flushlist); + INIT_LIST_HEAD(&sde->dmawait); + + sde->tail_csr = + get_kctxt_csr_addr(dd, this_idx, SD(TAIL)); + + if (idle_cnt) + dd->default_desc1 = + SDMA_DESC1_HEAD_TO_HOST_FLAG; + else + dd->default_desc1 = + SDMA_DESC1_INT_REQ_FLAG; + + tasklet_init(&sde->sdma_hw_clean_up_task, sdma_hw_clean_up_task, + (unsigned long)sde); + + tasklet_init(&sde->sdma_sw_clean_up_task, sdma_sw_clean_up_task, + (unsigned long)sde); + INIT_WORK(&sde->err_halt_worker, sdma_err_halt_wait); + INIT_WORK(&sde->flush_worker, sdma_field_flush); + + sde->progress_check_head = 0; + + init_timer(&sde->err_progress_check_timer); + sde->err_progress_check_timer.function = + sdma_err_progress_check; + sde->err_progress_check_timer.data = (unsigned long)sde; + + sde->descq = dma_zalloc_coherent( + &dd->pcidev->dev, + descq_cnt * sizeof(u64[2]), + &sde->descq_phys, + GFP_KERNEL + ); + if (!sde->descq) + goto bail; + sde->tx_ring = + kcalloc(descq_cnt, sizeof(struct sdma_txreq *), + GFP_KERNEL); + if (!sde->tx_ring) + sde->tx_ring = + vzalloc( + sizeof(struct sdma_txreq *) * + descq_cnt); + if (!sde->tx_ring) + goto bail; + } + + dd->sdma_heads_size = L1_CACHE_BYTES * num_engines; + /* Allocate memory for DMA of head registers to memory */ + dd->sdma_heads_dma = dma_zalloc_coherent( + &dd->pcidev->dev, + dd->sdma_heads_size, + &dd->sdma_heads_phys, + GFP_KERNEL + ); + if (!dd->sdma_heads_dma) { + dd_dev_err(dd, "failed to allocate SendDMA head memory\n"); + goto bail; + } + + /* Allocate memory for pad */ + dd->sdma_pad_dma = dma_zalloc_coherent( + &dd->pcidev->dev, + sizeof(u32), + &dd->sdma_pad_phys, + GFP_KERNEL + ); + if (!dd->sdma_pad_dma) { + dd_dev_err(dd, "failed to allocate SendDMA pad memory\n"); + goto bail; + } + + /* assign each engine to different cacheline and init registers */ + curr_head = (void *)dd->sdma_heads_dma; + for (this_idx = 0; this_idx < num_engines; ++this_idx) { + unsigned long phys_offset; + + sde = &dd->per_sdma[this_idx]; + + sde->head_dma = curr_head; + curr_head += L1_CACHE_BYTES; + phys_offset = (unsigned long)sde->head_dma - + (unsigned long)dd->sdma_heads_dma; + sde->head_phys = dd->sdma_heads_phys + phys_offset; + init_sdma_regs(sde, per_sdma_credits, idle_cnt); + } + dd->flags |= HFI1_HAS_SEND_DMA; + dd->flags |= idle_cnt ? HFI1_HAS_SDMA_TIMEOUT : 0; + dd->num_sdma = num_engines; + if (sdma_map_init(dd, port, ppd->vls_operational, NULL)) + goto bail; + dd_dev_info(dd, "SDMA num_sdma: %u\n", dd->num_sdma); + return 0; + +bail: + sdma_clean(dd, num_engines); + return -ENOMEM; +} + +/** + * sdma_all_running() - called when the link goes up + * @dd: hfi1_devdata + * + * This routine moves all engines to the running state. + */ +void sdma_all_running(struct hfi1_devdata *dd) +{ + struct sdma_engine *sde; + unsigned int i; + + /* move all engines to running */ + for (i = 0; i < dd->num_sdma; ++i) { + sde = &dd->per_sdma[i]; + sdma_process_event(sde, sdma_event_e30_go_running); + } +} + +/** + * sdma_all_idle() - called when the link goes down + * @dd: hfi1_devdata + * + * This routine moves all engines to the idle state. + */ +void sdma_all_idle(struct hfi1_devdata *dd) +{ + struct sdma_engine *sde; + unsigned int i; + + /* idle all engines */ + for (i = 0; i < dd->num_sdma; ++i) { + sde = &dd->per_sdma[i]; + sdma_process_event(sde, sdma_event_e70_go_idle); + } +} + +/** + * sdma_start() - called to kick off state processing for all engines + * @dd: hfi1_devdata + * + * This routine is for kicking off the state processing for all required + * sdma engines. Interrupts need to be working at this point. + * + */ +void sdma_start(struct hfi1_devdata *dd) +{ + unsigned i; + struct sdma_engine *sde; + + /* kick off the engines state processing */ + for (i = 0; i < dd->num_sdma; ++i) { + sde = &dd->per_sdma[i]; + sdma_process_event(sde, sdma_event_e10_go_hw_start); + } +} + +/** + * sdma_exit() - used when module is removed + * @dd: hfi1_devdata + */ +void sdma_exit(struct hfi1_devdata *dd) +{ + unsigned this_idx; + struct sdma_engine *sde; + + for (this_idx = 0; dd->per_sdma && this_idx < dd->num_sdma; + ++this_idx) { + + sde = &dd->per_sdma[this_idx]; + if (!list_empty(&sde->dmawait)) + dd_dev_err(dd, "sde %u: dmawait list not empty!\n", + sde->this_idx); + sdma_process_event(sde, sdma_event_e00_go_hw_down); + + del_timer_sync(&sde->err_progress_check_timer); + + /* + * This waits for the state machine to exit so it is not + * necessary to kill the sdma_sw_clean_up_task to make sure + * it is not running. + */ + sdma_finalput(&sde->state); + } + sdma_clean(dd, dd->num_sdma); +} + +/* + * unmap the indicated descriptor + */ +static inline void sdma_unmap_desc( + struct hfi1_devdata *dd, + struct sdma_desc *descp) +{ + switch (sdma_mapping_type(descp)) { + case SDMA_MAP_SINGLE: + dma_unmap_single( + &dd->pcidev->dev, + sdma_mapping_addr(descp), + sdma_mapping_len(descp), + DMA_TO_DEVICE); + break; + case SDMA_MAP_PAGE: + dma_unmap_page( + &dd->pcidev->dev, + sdma_mapping_addr(descp), + sdma_mapping_len(descp), + DMA_TO_DEVICE); + break; + } +} + +/* + * return the mode as indicated by the first + * descriptor in the tx. + */ +static inline u8 ahg_mode(struct sdma_txreq *tx) +{ + return (tx->descp[0].qw[1] & SDMA_DESC1_HEADER_MODE_SMASK) + >> SDMA_DESC1_HEADER_MODE_SHIFT; +} + +/** + * sdma_txclean() - clean tx of mappings, descp *kmalloc's + * @dd: hfi1_devdata for unmapping + * @tx: tx request to clean + * + * This is used in the progress routine to clean the tx or + * by the ULP to toss an in-process tx build. + * + * The code can be called multiple times without issue. + * + */ +void sdma_txclean( + struct hfi1_devdata *dd, + struct sdma_txreq *tx) +{ + u16 i; + + if (tx->num_desc) { + u8 skip = 0, mode = ahg_mode(tx); + + /* unmap first */ + sdma_unmap_desc(dd, &tx->descp[0]); + /* determine number of AHG descriptors to skip */ + if (mode > SDMA_AHG_APPLY_UPDATE1) + skip = mode >> 1; + for (i = 1 + skip; i < tx->num_desc; i++) + sdma_unmap_desc(dd, &tx->descp[i]); + tx->num_desc = 0; + } + kfree(tx->coalesce_buf); + tx->coalesce_buf = NULL; + /* kmalloc'ed descp */ + if (unlikely(tx->desc_limit > ARRAY_SIZE(tx->descs))) { + tx->desc_limit = ARRAY_SIZE(tx->descs); + kfree(tx->descp); + } +} + +static inline u16 sdma_gethead(struct sdma_engine *sde) +{ + struct hfi1_devdata *dd = sde->dd; + int use_dmahead; + u16 hwhead; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", + sde->this_idx, slashstrip(__FILE__), __LINE__, __func__); +#endif + +retry: + use_dmahead = HFI1_CAP_IS_KSET(USE_SDMA_HEAD) && __sdma_running(sde) && + (dd->flags & HFI1_HAS_SDMA_TIMEOUT); + hwhead = use_dmahead ? + (u16) le64_to_cpu(*sde->head_dma) : + (u16) read_sde_csr(sde, SD(HEAD)); + + if (unlikely(HFI1_CAP_IS_KSET(SDMA_HEAD_CHECK))) { + u16 cnt; + u16 swtail; + u16 swhead; + int sane; + + swhead = sde->descq_head & sde->sdma_mask; + /* this code is really bad for cache line trading */ + swtail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask; + cnt = sde->descq_cnt; + + if (swhead < swtail) + /* not wrapped */ + sane = (hwhead >= swhead) & (hwhead <= swtail); + else if (swhead > swtail) + /* wrapped around */ + sane = ((hwhead >= swhead) && (hwhead < cnt)) || + (hwhead <= swtail); + else + /* empty */ + sane = (hwhead == swhead); + + if (unlikely(!sane)) { + dd_dev_err(dd, "SDMA(%u) bad head (%s) hwhd=%hu swhd=%hu swtl=%hu cnt=%hu\n", + sde->this_idx, + use_dmahead ? "dma" : "kreg", + hwhead, swhead, swtail, cnt); + if (use_dmahead) { + /* try one more time, using csr */ + use_dmahead = 0; + goto retry; + } + /* proceed as if no progress */ + hwhead = swhead; + } + } + return hwhead; +} + +/* + * This is called when there are send DMA descriptors that might be + * available. + * + * This is called with head_lock held. + */ +static void sdma_desc_avail(struct sdma_engine *sde, unsigned avail) +{ + struct iowait *wait, *nw; + struct iowait *waits[SDMA_WAIT_BATCH_SIZE]; + unsigned i, n = 0, seq; + struct sdma_txreq *stx; + struct hfi1_ibdev *dev = &sde->dd->verbs_dev; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(sde->dd, "avail: %u\n", avail); +#endif + + do { + seq = read_seqbegin(&dev->iowait_lock); + if (!list_empty(&sde->dmawait)) { + /* at least one item */ + write_seqlock(&dev->iowait_lock); + /* Harvest waiters wanting DMA descriptors */ + list_for_each_entry_safe( + wait, + nw, + &sde->dmawait, + list) { + u16 num_desc = 0; + + if (!wait->wakeup) + continue; + if (n == ARRAY_SIZE(waits)) + break; + if (!list_empty(&wait->tx_head)) { + stx = list_first_entry( + &wait->tx_head, + struct sdma_txreq, + list); + num_desc = stx->num_desc; + } + if (num_desc > avail) + break; + avail -= num_desc; + list_del_init(&wait->list); + waits[n++] = wait; + } + write_sequnlock(&dev->iowait_lock); + break; + } + } while (read_seqretry(&dev->iowait_lock, seq)); + + for (i = 0; i < n; i++) + waits[i]->wakeup(waits[i], SDMA_AVAIL_REASON); +} + +/* head_lock must be held */ +static void sdma_make_progress(struct sdma_engine *sde, u64 status) +{ + struct sdma_txreq *txp = NULL; + int progress = 0; + u16 hwhead, swhead, swtail; + int idle_check_done = 0; + + hwhead = sdma_gethead(sde); + + /* The reason for some of the complexity of this code is that + * not all descriptors have corresponding txps. So, we have to + * be able to skip over descs until we wander into the range of + * the next txp on the list. + */ + +retry: + txp = get_txhead(sde); + swhead = sde->descq_head & sde->sdma_mask; + trace_hfi1_sdma_progress(sde, hwhead, swhead, txp); + while (swhead != hwhead) { + /* advance head, wrap if needed */ + swhead = ++sde->descq_head & sde->sdma_mask; + + /* if now past this txp's descs, do the callback */ + if (txp && txp->next_descq_idx == swhead) { + int drained = 0; + /* protect against complete modifying */ + struct iowait *wait = txp->wait; + + /* remove from list */ + sde->tx_ring[sde->tx_head++ & sde->sdma_mask] = NULL; + if (wait) + drained = atomic_dec_and_test(&wait->sdma_busy); +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + trace_hfi1_sdma_out_sn(sde, txp->sn); + if (WARN_ON_ONCE(sde->head_sn != txp->sn)) + dd_dev_err(sde->dd, "expected %llu got %llu\n", + sde->head_sn, txp->sn); + sde->head_sn++; +#endif + sdma_txclean(sde->dd, txp); + if (txp->complete) + (*txp->complete)( + txp, + SDMA_TXREQ_S_OK, + drained); + if (wait && drained) + iowait_drain_wakeup(wait); + /* see if there is another txp */ + txp = get_txhead(sde); + } + trace_hfi1_sdma_progress(sde, hwhead, swhead, txp); + progress++; + } + + /* + * The SDMA idle interrupt is not guaranteed to be ordered with respect + * to updates to the the dma_head location in host memory. The head + * value read might not be fully up to date. If there are pending + * descriptors and the SDMA idle interrupt fired then read from the + * CSR SDMA head instead to get the latest value from the hardware. + * The hardware SDMA head should be read at most once in this invocation + * of sdma_make_progress(..) which is ensured by idle_check_done flag + */ + if ((status & sde->idle_mask) && !idle_check_done) { + swtail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask; + if (swtail != hwhead) { + hwhead = (u16)read_sde_csr(sde, SD(HEAD)); + idle_check_done = 1; + goto retry; + } + } + + sde->last_status = status; + if (progress) + sdma_desc_avail(sde, sdma_descq_freecnt(sde)); +} + +/* + * sdma_engine_interrupt() - interrupt handler for engine + * @sde: sdma engine + * @status: sdma interrupt reason + * + * Status is a mask of the 3 possible interrupts for this engine. It will + * contain bits _only_ for this SDMA engine. It will contain at least one + * bit, it may contain more. + */ +void sdma_engine_interrupt(struct sdma_engine *sde, u64 status) +{ + trace_hfi1_sdma_engine_interrupt(sde, status); + write_seqlock(&sde->head_lock); + sdma_set_desc_cnt(sde, sde->descq_cnt / 2); + sdma_make_progress(sde, status); + write_sequnlock(&sde->head_lock); +} + +/** + * sdma_engine_error() - error handler for engine + * @sde: sdma engine + * @status: sdma interrupt reason + */ +void sdma_engine_error(struct sdma_engine *sde, u64 status) +{ + unsigned long flags; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) error status 0x%llx state %s\n", + sde->this_idx, + (unsigned long long)status, + sdma_state_names[sde->state.current_state]); +#endif + spin_lock_irqsave(&sde->tail_lock, flags); + write_seqlock(&sde->head_lock); + if (status & ALL_SDMA_ENG_HALT_ERRS) + __sdma_process_event(sde, sdma_event_e60_hw_halted); + if (status & ~SD(ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK)) { + dd_dev_err(sde->dd, + "SDMA (%u) engine error: 0x%llx state %s\n", + sde->this_idx, + (unsigned long long)status, + sdma_state_names[sde->state.current_state]); + dump_sdma_state(sde); + } + write_sequnlock(&sde->head_lock); + spin_unlock_irqrestore(&sde->tail_lock, flags); +} + +static void sdma_sendctrl(struct sdma_engine *sde, unsigned op) +{ + u64 set_senddmactrl = 0; + u64 clr_senddmactrl = 0; + unsigned long flags; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) senddmactrl E=%d I=%d H=%d C=%d\n", + sde->this_idx, + (op & SDMA_SENDCTRL_OP_ENABLE) ? 1 : 0, + (op & SDMA_SENDCTRL_OP_INTENABLE) ? 1 : 0, + (op & SDMA_SENDCTRL_OP_HALT) ? 1 : 0, + (op & SDMA_SENDCTRL_OP_CLEANUP) ? 1 : 0); +#endif + + if (op & SDMA_SENDCTRL_OP_ENABLE) + set_senddmactrl |= SD(CTRL_SDMA_ENABLE_SMASK); + else + clr_senddmactrl |= SD(CTRL_SDMA_ENABLE_SMASK); + + if (op & SDMA_SENDCTRL_OP_INTENABLE) + set_senddmactrl |= SD(CTRL_SDMA_INT_ENABLE_SMASK); + else + clr_senddmactrl |= SD(CTRL_SDMA_INT_ENABLE_SMASK); + + if (op & SDMA_SENDCTRL_OP_HALT) + set_senddmactrl |= SD(CTRL_SDMA_HALT_SMASK); + else + clr_senddmactrl |= SD(CTRL_SDMA_HALT_SMASK); + + spin_lock_irqsave(&sde->senddmactrl_lock, flags); + + sde->p_senddmactrl |= set_senddmactrl; + sde->p_senddmactrl &= ~clr_senddmactrl; + + if (op & SDMA_SENDCTRL_OP_CLEANUP) + write_sde_csr(sde, SD(CTRL), + sde->p_senddmactrl | + SD(CTRL_SDMA_CLEANUP_SMASK)); + else + write_sde_csr(sde, SD(CTRL), sde->p_senddmactrl); + + spin_unlock_irqrestore(&sde->senddmactrl_lock, flags); + +#ifdef CONFIG_SDMA_VERBOSITY + sdma_dumpstate(sde); +#endif +} + +static void sdma_setlengen(struct sdma_engine *sde) +{ +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", + sde->this_idx, slashstrip(__FILE__), __LINE__, __func__); +#endif + + /* + * Set SendDmaLenGen and clear-then-set the MSB of the generation + * count to enable generation checking and load the internal + * generation counter. + */ + write_sde_csr(sde, SD(LEN_GEN), + (sde->descq_cnt/64) << SD(LEN_GEN_LENGTH_SHIFT) + ); + write_sde_csr(sde, SD(LEN_GEN), + ((sde->descq_cnt/64) << SD(LEN_GEN_LENGTH_SHIFT)) + | (4ULL << SD(LEN_GEN_GENERATION_SHIFT)) + ); +} + +static inline void sdma_update_tail(struct sdma_engine *sde, u16 tail) +{ + /* Commit writes to memory and advance the tail on the chip */ + smp_wmb(); /* see get_txhead() */ + writeq(tail, sde->tail_csr); +} + +/* + * This is called when changing to state s10_hw_start_up_halt_wait as + * a result of send buffer errors or send DMA descriptor errors. + */ +static void sdma_hw_start_up(struct sdma_engine *sde) +{ + u64 reg; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", + sde->this_idx, slashstrip(__FILE__), __LINE__, __func__); +#endif + + sdma_setlengen(sde); + sdma_update_tail(sde, 0); /* Set SendDmaTail */ + *sde->head_dma = 0; + + reg = SD(ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_MASK) << + SD(ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SHIFT); + write_sde_csr(sde, SD(ENG_ERR_CLEAR), reg); +} + +#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \ +(r &= ~SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) + +#define SET_STATIC_RATE_CONTROL_SMASK(r) \ +(r |= SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) +/* + * set_sdma_integrity + * + * Set the SEND_DMA_CHECK_ENABLE register for send DMA engine 'sde'. + */ +static void set_sdma_integrity(struct sdma_engine *sde) +{ + struct hfi1_devdata *dd = sde->dd; + u64 reg; + + if (unlikely(HFI1_CAP_IS_KSET(NO_INTEGRITY))) + return; + + reg = hfi1_pkt_base_sdma_integrity(dd); + + if (HFI1_CAP_IS_KSET(STATIC_RATE_CTRL)) + CLEAR_STATIC_RATE_CONTROL_SMASK(reg); + else + SET_STATIC_RATE_CONTROL_SMASK(reg); + + write_sde_csr(sde, SD(CHECK_ENABLE), reg); +} + + +static void init_sdma_regs( + struct sdma_engine *sde, + u32 credits, + uint idle_cnt) +{ + u8 opval, opmask; +#ifdef CONFIG_SDMA_VERBOSITY + struct hfi1_devdata *dd = sde->dd; + + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", + sde->this_idx, slashstrip(__FILE__), __LINE__, __func__); +#endif + + write_sde_csr(sde, SD(BASE_ADDR), sde->descq_phys); + sdma_setlengen(sde); + sdma_update_tail(sde, 0); /* Set SendDmaTail */ + write_sde_csr(sde, SD(RELOAD_CNT), idle_cnt); + write_sde_csr(sde, SD(DESC_CNT), 0); + write_sde_csr(sde, SD(HEAD_ADDR), sde->head_phys); + write_sde_csr(sde, SD(MEMORY), + ((u64)credits << + SD(MEMORY_SDMA_MEMORY_CNT_SHIFT)) | + ((u64)(credits * sde->this_idx) << + SD(MEMORY_SDMA_MEMORY_INDEX_SHIFT))); + write_sde_csr(sde, SD(ENG_ERR_MASK), ~0ull); + set_sdma_integrity(sde); + opmask = OPCODE_CHECK_MASK_DISABLED; + opval = OPCODE_CHECK_VAL_DISABLED; + write_sde_csr(sde, SD(CHECK_OPCODE), + (opmask << SEND_CTXT_CHECK_OPCODE_MASK_SHIFT) | + (opval << SEND_CTXT_CHECK_OPCODE_VALUE_SHIFT)); +} + +#ifdef CONFIG_SDMA_VERBOSITY + +#define sdma_dumpstate_helper0(reg) do { \ + csr = read_csr(sde->dd, reg); \ + dd_dev_err(sde->dd, "%36s 0x%016llx\n", #reg, csr); \ + } while (0) + +#define sdma_dumpstate_helper(reg) do { \ + csr = read_sde_csr(sde, reg); \ + dd_dev_err(sde->dd, "%36s[%02u] 0x%016llx\n", \ + #reg, sde->this_idx, csr); \ + } while (0) + +#define sdma_dumpstate_helper2(reg) do { \ + csr = read_csr(sde->dd, reg + (8 * i)); \ + dd_dev_err(sde->dd, "%33s_%02u 0x%016llx\n", \ + #reg, i, csr); \ + } while (0) + +void sdma_dumpstate(struct sdma_engine *sde) +{ + u64 csr; + unsigned i; + + sdma_dumpstate_helper(SD(CTRL)); + sdma_dumpstate_helper(SD(STATUS)); + sdma_dumpstate_helper0(SD(ERR_STATUS)); + sdma_dumpstate_helper0(SD(ERR_MASK)); + sdma_dumpstate_helper(SD(ENG_ERR_STATUS)); + sdma_dumpstate_helper(SD(ENG_ERR_MASK)); + + for (i = 0; i < CCE_NUM_INT_CSRS; ++i) { + sdma_dumpstate_helper2(CCE_INT_STATUS)); + sdma_dumpstate_helper2(CCE_INT_MASK); + sdma_dumpstate_helper2(CCE_INT_BLOCKED); + } + + sdma_dumpstate_helper(SD(TAIL)); + sdma_dumpstate_helper(SD(HEAD)); + sdma_dumpstate_helper(SD(PRIORITY_THLD)); + sdma_dumpstate_helper(SD(IDLE_CNT); + sdma_dumpstate_helper(SD(RELOAD_CNT)); + sdma_dumpstate_helper(SD(DESC_CNT)); + sdma_dumpstate_helper(SD(DESC_FETCHED_CNT)); + sdma_dumpstate_helper(SD(MEMORY)); + sdma_dumpstate_helper0(SD(ENGINES)); + sdma_dumpstate_helper0(SD(MEM_SIZE)); + /* sdma_dumpstate_helper(SEND_EGRESS_SEND_DMA_STATUS); */ + sdma_dumpstate_helper(SD(BASE_ADDR)); + sdma_dumpstate_helper(SD(LEN_GEN)); + sdma_dumpstate_helper(SD(HEAD_ADDR)); + sdma_dumpstate_helper(SD(CHECK_ENABLE)); + sdma_dumpstate_helper(SD(CHECK_VL)); + sdma_dumpstate_helper(SD(CHECK_JOB_KEY)); + sdma_dumpstate_helper(SD(CHECK_PARTITION_KEY)); + sdma_dumpstate_helper(SD(CHECK_SLID)); + sdma_dumpstate_helper(SD(CHECK_OPCODE)); +} +#endif + +static void dump_sdma_state(struct sdma_engine *sde) +{ + struct hw_sdma_desc *descq; + struct hw_sdma_desc *descqp; + u64 desc[2]; + u64 addr; + u8 gen; + u16 len; + u16 head, tail, cnt; + + head = sde->descq_head & sde->sdma_mask; + tail = sde->descq_tail & sde->sdma_mask; + cnt = sdma_descq_freecnt(sde); + descq = sde->descq; + + dd_dev_err(sde->dd, + "SDMA (%u) descq_head: %u descq_tail: %u freecnt: %u FLE %d\n", + sde->this_idx, + head, + tail, + cnt, + !list_empty(&sde->flushlist)); + + /* print info for each entry in the descriptor queue */ + while (head != tail) { + char flags[6] = { 'x', 'x', 'x', 'x', 0 }; + + descqp = &sde->descq[head]; + desc[0] = le64_to_cpu(descqp->qw[0]); + desc[1] = le64_to_cpu(descqp->qw[1]); + flags[0] = (desc[1] & SDMA_DESC1_INT_REQ_FLAG) ? 'I' : '-'; + flags[1] = (desc[1] & SDMA_DESC1_HEAD_TO_HOST_FLAG) ? + 'H' : '-'; + flags[2] = (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) ? 'F' : '-'; + flags[3] = (desc[0] & SDMA_DESC0_LAST_DESC_FLAG) ? 'L' : '-'; + addr = (desc[0] >> SDMA_DESC0_PHY_ADDR_SHIFT) + & SDMA_DESC0_PHY_ADDR_MASK; + gen = (desc[1] >> SDMA_DESC1_GENERATION_SHIFT) + & SDMA_DESC1_GENERATION_MASK; + len = (desc[0] >> SDMA_DESC0_BYTE_COUNT_SHIFT) + & SDMA_DESC0_BYTE_COUNT_MASK; + dd_dev_err(sde->dd, + "SDMA sdmadesc[%u]: flags:%s addr:0x%016llx gen:%u len:%u bytes\n", + head, flags, addr, gen, len); + dd_dev_err(sde->dd, + "\tdesc0:0x%016llx desc1 0x%016llx\n", + desc[0], desc[1]); + if (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) + dd_dev_err(sde->dd, + "\taidx: %u amode: %u alen: %u\n", + (u8)((desc[1] & SDMA_DESC1_HEADER_INDEX_SMASK) + >> SDMA_DESC1_HEADER_INDEX_MASK), + (u8)((desc[1] & SDMA_DESC1_HEADER_MODE_SMASK) + >> SDMA_DESC1_HEADER_MODE_SHIFT), + (u8)((desc[1] & SDMA_DESC1_HEADER_DWS_SMASK) + >> SDMA_DESC1_HEADER_DWS_SHIFT)); + head++; + head &= sde->sdma_mask; + } +} + +#define SDE_FMT \ + "SDE %u STE %s C 0x%llx S 0x%016llx E 0x%llx T(HW) 0x%llx T(SW) 0x%x H(HW) 0x%llx H(SW) 0x%x H(D) 0x%llx DM 0x%llx GL 0x%llx R 0x%llx LIS 0x%llx AHGI 0x%llx TXT %u TXH %u DT %u DH %u FLNE %d DQF %u SLC 0x%llx\n" +/** + * sdma_seqfile_dump_sde() - debugfs dump of sde + * @s: seq file + * @sde: send dma engine to dump + * + * This routine dumps the sde to the indicated seq file. + */ +void sdma_seqfile_dump_sde(struct seq_file *s, struct sdma_engine *sde) +{ + u16 head, tail; + struct hw_sdma_desc *descqp; + u64 desc[2]; + u64 addr; + u8 gen; + u16 len; + + head = sde->descq_head & sde->sdma_mask; + tail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask; + seq_printf(s, SDE_FMT, sde->this_idx, + sdma_state_name(sde->state.current_state), + (unsigned long long)read_sde_csr(sde, SD(CTRL)), + (unsigned long long)read_sde_csr(sde, SD(STATUS)), + (unsigned long long)read_sde_csr(sde, + SD(ENG_ERR_STATUS)), + (unsigned long long)read_sde_csr(sde, SD(TAIL)), + tail, + (unsigned long long)read_sde_csr(sde, SD(HEAD)), + head, + (unsigned long long)le64_to_cpu(*sde->head_dma), + (unsigned long long)read_sde_csr(sde, SD(MEMORY)), + (unsigned long long)read_sde_csr(sde, SD(LEN_GEN)), + (unsigned long long)read_sde_csr(sde, SD(RELOAD_CNT)), + (unsigned long long)sde->last_status, + (unsigned long long)sde->ahg_bits, + sde->tx_tail, + sde->tx_head, + sde->descq_tail, + sde->descq_head, + !list_empty(&sde->flushlist), + sde->descq_full_count, + (unsigned long long)read_sde_csr(sde, SEND_DMA_CHECK_SLID)); + + /* print info for each entry in the descriptor queue */ + while (head != tail) { + char flags[6] = { 'x', 'x', 'x', 'x', 0 }; + + descqp = &sde->descq[head]; + desc[0] = le64_to_cpu(descqp->qw[0]); + desc[1] = le64_to_cpu(descqp->qw[1]); + flags[0] = (desc[1] & SDMA_DESC1_INT_REQ_FLAG) ? 'I' : '-'; + flags[1] = (desc[1] & SDMA_DESC1_HEAD_TO_HOST_FLAG) ? + 'H' : '-'; + flags[2] = (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) ? 'F' : '-'; + flags[3] = (desc[0] & SDMA_DESC0_LAST_DESC_FLAG) ? 'L' : '-'; + addr = (desc[0] >> SDMA_DESC0_PHY_ADDR_SHIFT) + & SDMA_DESC0_PHY_ADDR_MASK; + gen = (desc[1] >> SDMA_DESC1_GENERATION_SHIFT) + & SDMA_DESC1_GENERATION_MASK; + len = (desc[0] >> SDMA_DESC0_BYTE_COUNT_SHIFT) + & SDMA_DESC0_BYTE_COUNT_MASK; + seq_printf(s, + "\tdesc[%u]: flags:%s addr:0x%016llx gen:%u len:%u bytes\n", + head, flags, addr, gen, len); + if (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) + seq_printf(s, "\t\tahgidx: %u ahgmode: %u\n", + (u8)((desc[1] & SDMA_DESC1_HEADER_INDEX_SMASK) + >> SDMA_DESC1_HEADER_INDEX_MASK), + (u8)((desc[1] & SDMA_DESC1_HEADER_MODE_SMASK) + >> SDMA_DESC1_HEADER_MODE_SHIFT)); + head = (head + 1) & sde->sdma_mask; + } +} + +/* + * add the generation number into + * the qw1 and return + */ +static inline u64 add_gen(struct sdma_engine *sde, u64 qw1) +{ + u8 generation = (sde->descq_tail >> sde->sdma_shift) & 3; + + qw1 &= ~SDMA_DESC1_GENERATION_SMASK; + qw1 |= ((u64)generation & SDMA_DESC1_GENERATION_MASK) + << SDMA_DESC1_GENERATION_SHIFT; + return qw1; +} + +/* + * This routine submits the indicated tx + * + * Space has already been guaranteed and + * tail side of ring is locked. + * + * The hardware tail update is done + * in the caller and that is facilitated + * by returning the new tail. + * + * There is special case logic for ahg + * to not add the generation number for + * up to 2 descriptors that follow the + * first descriptor. + * + */ +static inline u16 submit_tx(struct sdma_engine *sde, struct sdma_txreq *tx) +{ + int i; + u16 tail; + struct sdma_desc *descp = tx->descp; + u8 skip = 0, mode = ahg_mode(tx); + + tail = sde->descq_tail & sde->sdma_mask; + sde->descq[tail].qw[0] = cpu_to_le64(descp->qw[0]); + sde->descq[tail].qw[1] = cpu_to_le64(add_gen(sde, descp->qw[1])); + trace_hfi1_sdma_descriptor(sde, descp->qw[0], descp->qw[1], + tail, &sde->descq[tail]); + tail = ++sde->descq_tail & sde->sdma_mask; + descp++; + if (mode > SDMA_AHG_APPLY_UPDATE1) + skip = mode >> 1; + for (i = 1; i < tx->num_desc; i++, descp++) { + u64 qw1; + + sde->descq[tail].qw[0] = cpu_to_le64(descp->qw[0]); + if (skip) { + /* edits don't have generation */ + qw1 = descp->qw[1]; + skip--; + } else { + /* replace generation with real one for non-edits */ + qw1 = add_gen(sde, descp->qw[1]); + } + sde->descq[tail].qw[1] = cpu_to_le64(qw1); + trace_hfi1_sdma_descriptor(sde, descp->qw[0], qw1, + tail, &sde->descq[tail]); + tail = ++sde->descq_tail & sde->sdma_mask; + } + tx->next_descq_idx = tail; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + tx->sn = sde->tail_sn++; + trace_hfi1_sdma_in_sn(sde, tx->sn); + WARN_ON_ONCE(sde->tx_ring[sde->tx_tail & sde->sdma_mask]); +#endif + sde->tx_ring[sde->tx_tail++ & sde->sdma_mask] = tx; + sde->desc_avail -= tx->num_desc; + return tail; +} + +/* + * Check for progress + */ +static int sdma_check_progress( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *tx) +{ + int ret; + + sde->desc_avail = sdma_descq_freecnt(sde); + if (tx->num_desc <= sde->desc_avail) + return -EAGAIN; + /* pulse the head_lock */ + if (wait && wait->sleep) { + unsigned seq; + + seq = raw_seqcount_begin( + (const seqcount_t *)&sde->head_lock.seqcount); + ret = wait->sleep(sde, wait, tx, seq); + if (ret == -EAGAIN) + sde->desc_avail = sdma_descq_freecnt(sde); + } else + ret = -EBUSY; + return ret; +} + +/** + * sdma_send_txreq() - submit a tx req to ring + * @sde: sdma engine to use + * @wait: wait structure to use when full (may be NULL) + * @tx: sdma_txreq to submit + * + * The call submits the tx into the ring. If a iowait structure is non-NULL + * the packet will be queued to the list in wait. + * + * Return: + * 0 - Success, -EINVAL - sdma_txreq incomplete, -EBUSY - no space in + * ring (wait == NULL) + * -EIOCBQUEUED - tx queued to iowait, -ECOMM bad sdma state + */ +int sdma_send_txreq(struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *tx) +{ + int ret = 0; + u16 tail; + unsigned long flags; + + /* user should have supplied entire packet */ + if (unlikely(tx->tlen)) + return -EINVAL; + tx->wait = wait; + spin_lock_irqsave(&sde->tail_lock, flags); +retry: + if (unlikely(!__sdma_running(sde))) + goto unlock_noconn; + if (unlikely(tx->num_desc > sde->desc_avail)) + goto nodesc; + tail = submit_tx(sde, tx); + if (wait) + atomic_inc(&wait->sdma_busy); + sdma_update_tail(sde, tail); +unlock: + spin_unlock_irqrestore(&sde->tail_lock, flags); + return ret; +unlock_noconn: + if (wait) + atomic_inc(&wait->sdma_busy); + tx->next_descq_idx = 0; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + tx->sn = sde->tail_sn++; + trace_hfi1_sdma_in_sn(sde, tx->sn); +#endif + spin_lock(&sde->flushlist_lock); + list_add_tail(&tx->list, &sde->flushlist); + spin_unlock(&sde->flushlist_lock); + if (wait) { + wait->tx_count++; + wait->count += tx->num_desc; + } + schedule_work(&sde->flush_worker); + ret = -ECOMM; + goto unlock; +nodesc: + ret = sdma_check_progress(sde, wait, tx); + if (ret == -EAGAIN) { + ret = 0; + goto retry; + } + sde->descq_full_count++; + goto unlock; +} + +/** + * sdma_send_txlist() - submit a list of tx req to ring + * @sde: sdma engine to use + * @wait: wait structure to use when full (may be NULL) + * @tx_list: list of sdma_txreqs to submit + * + * The call submits the list into the ring. + * + * If the iowait structure is non-NULL and not equal to the iowait list + * the unprocessed part of the list will be appended to the list in wait. + * + * In all cases, the tx_list will be updated so the head of the tx_list is + * the list of descriptors that have yet to be transmitted. + * + * The intent of this call is to provide a more efficient + * way of submitting multiple packets to SDMA while holding the tail + * side locking. + * + * Return: + * 0 - Success, -EINVAL - sdma_txreq incomplete, -EBUSY - no space in ring + * (wait == NULL) + * -EIOCBQUEUED - tx queued to iowait, -ECOMM bad sdma state + */ +int sdma_send_txlist(struct sdma_engine *sde, + struct iowait *wait, + struct list_head *tx_list) +{ + struct sdma_txreq *tx, *tx_next; + int ret = 0; + unsigned long flags; + u16 tail = INVALID_TAIL; + int count = 0; + + spin_lock_irqsave(&sde->tail_lock, flags); +retry: + list_for_each_entry_safe(tx, tx_next, tx_list, list) { + tx->wait = wait; + if (unlikely(!__sdma_running(sde))) + goto unlock_noconn; + if (unlikely(tx->num_desc > sde->desc_avail)) + goto nodesc; + if (unlikely(tx->tlen)) { + ret = -EINVAL; + goto update_tail; + } + list_del_init(&tx->list); + tail = submit_tx(sde, tx); + count++; + if (tail != INVALID_TAIL && + (count & SDMA_TAIL_UPDATE_THRESH) == 0) { + sdma_update_tail(sde, tail); + tail = INVALID_TAIL; + } + } +update_tail: + if (wait) + atomic_add(count, &wait->sdma_busy); + if (tail != INVALID_TAIL) + sdma_update_tail(sde, tail); + spin_unlock_irqrestore(&sde->tail_lock, flags); + return ret; +unlock_noconn: + spin_lock(&sde->flushlist_lock); + list_for_each_entry_safe(tx, tx_next, tx_list, list) { + tx->wait = wait; + list_del_init(&tx->list); + if (wait) + atomic_inc(&wait->sdma_busy); + tx->next_descq_idx = 0; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + tx->sn = sde->tail_sn++; + trace_hfi1_sdma_in_sn(sde, tx->sn); +#endif + list_add_tail(&tx->list, &sde->flushlist); + if (wait) { + wait->tx_count++; + wait->count += tx->num_desc; + } + } + spin_unlock(&sde->flushlist_lock); + schedule_work(&sde->flush_worker); + ret = -ECOMM; + goto update_tail; +nodesc: + ret = sdma_check_progress(sde, wait, tx); + if (ret == -EAGAIN) { + ret = 0; + goto retry; + } + sde->descq_full_count++; + goto update_tail; +} + +static void sdma_process_event(struct sdma_engine *sde, + enum sdma_events event) +{ + unsigned long flags; + + spin_lock_irqsave(&sde->tail_lock, flags); + write_seqlock(&sde->head_lock); + + __sdma_process_event(sde, event); + + if (sde->state.current_state == sdma_state_s99_running) + sdma_desc_avail(sde, sdma_descq_freecnt(sde)); + + write_sequnlock(&sde->head_lock); + spin_unlock_irqrestore(&sde->tail_lock, flags); +} + +static void __sdma_process_event(struct sdma_engine *sde, + enum sdma_events event) +{ + struct sdma_state *ss = &sde->state; + int need_progress = 0; + + /* CONFIG SDMA temporary */ +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) [%s] %s\n", sde->this_idx, + sdma_state_names[ss->current_state], + sdma_event_names[event]); +#endif + + switch (ss->current_state) { + case sdma_state_s00_hw_down: + switch (event) { + case sdma_event_e00_go_hw_down: + break; + case sdma_event_e30_go_running: + /* + * If down, but running requested (usually result + * of link up, then we need to start up. + * This can happen when hw down is requested while + * bringing the link up with traffic active on + * 7220, e.g. */ + ss->go_s99_running = 1; + /* fall through and start dma engine */ + case sdma_event_e10_go_hw_start: + /* This reference means the state machine is started */ + sdma_get(&sde->state); + sdma_set_state(sde, + sdma_state_s10_hw_start_up_halt_wait); + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e40_sw_cleaned: + sdma_sw_tear_down(sde); + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s10_hw_start_up_halt_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_sw_tear_down(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + sdma_set_state(sde, + sdma_state_s15_hw_start_up_clean_wait); + sdma_start_hw_clean_up(sde); + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + sdma_start_err_halt_wait(sde); + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s15_hw_start_up_clean_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_sw_tear_down(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + sdma_hw_start_up(sde); + sdma_set_state(sde, ss->go_s99_running ? + sdma_state_s99_running : + sdma_state_s20_idle); + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s20_idle: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_sw_tear_down(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + sdma_set_state(sde, sdma_state_s99_running); + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + sdma_set_state(sde, sdma_state_s50_hw_halt_wait); + sdma_start_err_halt_wait(sde); + break; + case sdma_event_e70_go_idle: + break; + case sdma_event_e85_link_down: + /* fall through */ + case sdma_event_e80_hw_freeze: + sdma_set_state(sde, sdma_state_s80_hw_freeze); + atomic_dec(&sde->dd->sdma_unfreeze_count); + wake_up_interruptible(&sde->dd->sdma_unfreeze_wq); + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s30_sw_clean_up_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + sdma_set_state(sde, sdma_state_s40_hw_clean_up_wait); + sdma_start_hw_clean_up(sde); + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + ss->go_s99_running = 0; + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s40_hw_clean_up_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + sdma_hw_start_up(sde); + sdma_set_state(sde, ss->go_s99_running ? + sdma_state_s99_running : + sdma_state_s20_idle); + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + ss->go_s99_running = 0; + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s50_hw_halt_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + sdma_set_state(sde, sdma_state_s30_sw_clean_up_wait); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + sdma_start_err_halt_wait(sde); + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + ss->go_s99_running = 0; + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s60_idle_halt_wait: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + sdma_set_state(sde, sdma_state_s30_sw_clean_up_wait); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + sdma_start_err_halt_wait(sde); + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s80_hw_freeze: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + sdma_set_state(sde, sdma_state_s82_freeze_sw_clean); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e82_hw_unfreeze: + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s82_freeze_sw_clean: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + ss->go_s99_running = 1; + break; + case sdma_event_e40_sw_cleaned: + /* notify caller this engine is done cleaning */ + atomic_dec(&sde->dd->sdma_unfreeze_count); + wake_up_interruptible(&sde->dd->sdma_unfreeze_wq); + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + break; + case sdma_event_e70_go_idle: + ss->go_s99_running = 0; + break; + case sdma_event_e80_hw_freeze: + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + sdma_hw_start_up(sde); + sdma_set_state(sde, ss->go_s99_running ? + sdma_state_s99_running : + sdma_state_s20_idle); + break; + case sdma_event_e85_link_down: + break; + case sdma_event_e90_sw_halted: + break; + } + break; + + case sdma_state_s99_running: + switch (event) { + case sdma_event_e00_go_hw_down: + sdma_set_state(sde, sdma_state_s00_hw_down); + sdma_start_sw_clean_up(sde); + break; + case sdma_event_e10_go_hw_start: + break; + case sdma_event_e15_hw_halt_done: + break; + case sdma_event_e25_hw_clean_up_done: + break; + case sdma_event_e30_go_running: + break; + case sdma_event_e40_sw_cleaned: + break; + case sdma_event_e50_hw_cleaned: + break; + case sdma_event_e60_hw_halted: + need_progress = 1; + sdma_err_progress_check_schedule(sde); + case sdma_event_e90_sw_halted: + /* + * SW initiated halt does not perform engines + * progress check + */ + sdma_set_state(sde, sdma_state_s50_hw_halt_wait); + sdma_start_err_halt_wait(sde); + break; + case sdma_event_e70_go_idle: + sdma_set_state(sde, sdma_state_s60_idle_halt_wait); + break; + case sdma_event_e85_link_down: + ss->go_s99_running = 0; + /* fall through */ + case sdma_event_e80_hw_freeze: + sdma_set_state(sde, sdma_state_s80_hw_freeze); + atomic_dec(&sde->dd->sdma_unfreeze_count); + wake_up_interruptible(&sde->dd->sdma_unfreeze_wq); + break; + case sdma_event_e81_hw_frozen: + break; + case sdma_event_e82_hw_unfreeze: + break; + } + break; + } + + ss->last_event = event; + if (need_progress) + sdma_make_progress(sde, 0); +} + +/* + * _extend_sdma_tx_descs() - helper to extend txreq + * + * This is called once the initial nominal allocation + * of descriptors in the sdma_txreq is exhausted. + * + * The code will bump the allocation up to the max + * of MAX_DESC (64) descriptors. There doesn't seem + * much point in an interim step. + * + */ +int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx) +{ + int i; + + tx->descp = kmalloc_array( + MAX_DESC, + sizeof(struct sdma_desc), + GFP_ATOMIC); + if (!tx->descp) + return -ENOMEM; + tx->desc_limit = MAX_DESC; + /* copy ones already built */ + for (i = 0; i < tx->num_desc; i++) + tx->descp[i] = tx->descs[i]; + return 0; +} + +/* Update sdes when the lmc changes */ +void sdma_update_lmc(struct hfi1_devdata *dd, u64 mask, u32 lid) +{ + struct sdma_engine *sde; + int i; + u64 sreg; + + sreg = ((mask & SD(CHECK_SLID_MASK_MASK)) << + SD(CHECK_SLID_MASK_SHIFT)) | + (((lid & mask) & SD(CHECK_SLID_VALUE_MASK)) << + SD(CHECK_SLID_VALUE_SHIFT)); + + for (i = 0; i < dd->num_sdma; i++) { + hfi1_cdbg(LINKVERB, "SendDmaEngine[%d].SLID_CHECK = 0x%x", + i, (u32)sreg); + sde = &dd->per_sdma[i]; + write_sde_csr(sde, SD(CHECK_SLID), sreg); + } +} + +/* tx not dword sized - pad */ +int _pad_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx) +{ + int rval = 0; + + if ((unlikely(tx->num_desc == tx->desc_limit))) { + rval = _extend_sdma_tx_descs(dd, tx); + if (rval) + return rval; + } + /* finish the one just added */ + tx->num_desc++; + make_tx_sdma_desc( + tx, + SDMA_MAP_NONE, + dd->sdma_pad_phys, + sizeof(u32) - (tx->packet_len & (sizeof(u32) - 1))); + _sdma_close_tx(dd, tx); + return rval; +} + +/* + * Add ahg to the sdma_txreq + * + * The logic will consume up to 3 + * descriptors at the beginning of + * sdma_txreq. + */ +void _sdma_txreq_ahgadd( + struct sdma_txreq *tx, + u8 num_ahg, + u8 ahg_entry, + u32 *ahg, + u8 ahg_hlen) +{ + u32 i, shift = 0, desc = 0; + u8 mode; + + WARN_ON_ONCE(num_ahg > 9 || (ahg_hlen & 3) || ahg_hlen == 4); + /* compute mode */ + if (num_ahg == 1) + mode = SDMA_AHG_APPLY_UPDATE1; + else if (num_ahg <= 5) + mode = SDMA_AHG_APPLY_UPDATE2; + else + mode = SDMA_AHG_APPLY_UPDATE3; + tx->num_desc++; + /* initialize to consumed descriptors to zero */ + switch (mode) { + case SDMA_AHG_APPLY_UPDATE3: + tx->num_desc++; + tx->descs[2].qw[0] = 0; + tx->descs[2].qw[1] = 0; + /* FALLTHROUGH */ + case SDMA_AHG_APPLY_UPDATE2: + tx->num_desc++; + tx->descs[1].qw[0] = 0; + tx->descs[1].qw[1] = 0; + break; + } + ahg_hlen >>= 2; + tx->descs[0].qw[1] |= + (((u64)ahg_entry & SDMA_DESC1_HEADER_INDEX_MASK) + << SDMA_DESC1_HEADER_INDEX_SHIFT) | + (((u64)ahg_hlen & SDMA_DESC1_HEADER_DWS_MASK) + << SDMA_DESC1_HEADER_DWS_SHIFT) | + (((u64)mode & SDMA_DESC1_HEADER_MODE_MASK) + << SDMA_DESC1_HEADER_MODE_SHIFT) | + (((u64)ahg[0] & SDMA_DESC1_HEADER_UPDATE1_MASK) + << SDMA_DESC1_HEADER_UPDATE1_SHIFT); + for (i = 0; i < (num_ahg - 1); i++) { + if (!shift && !(i & 2)) + desc++; + tx->descs[desc].qw[!!(i & 2)] |= + (((u64)ahg[i + 1]) + << shift); + shift = (shift + 32) & 63; + } +} + +/** + * sdma_ahg_alloc - allocate an AHG entry + * @sde: engine to allocate from + * + * Return: + * 0-31 when successful, -EOPNOTSUPP if AHG is not enabled, + * -ENOSPC if an entry is not available + */ +int sdma_ahg_alloc(struct sdma_engine *sde) +{ + int nr; + int oldbit; + + if (!sde) { + trace_hfi1_ahg_allocate(sde, -EINVAL); + return -EINVAL; + } + while (1) { + nr = ffz(ACCESS_ONCE(sde->ahg_bits)); + if (nr > 31) { + trace_hfi1_ahg_allocate(sde, -ENOSPC); + return -ENOSPC; + } + oldbit = test_and_set_bit(nr, &sde->ahg_bits); + if (!oldbit) + break; + cpu_relax(); + } + trace_hfi1_ahg_allocate(sde, nr); + return nr; +} + +/** + * sdma_ahg_free - free an AHG entry + * @sde: engine to return AHG entry + * @ahg_index: index to free + * + * This routine frees the indicate AHG entry. + */ +void sdma_ahg_free(struct sdma_engine *sde, int ahg_index) +{ + if (!sde) + return; + trace_hfi1_ahg_deallocate(sde, ahg_index); + if (ahg_index < 0 || ahg_index > 31) + return; + clear_bit(ahg_index, &sde->ahg_bits); +} + +/* + * SPC freeze handling for SDMA engines. Called when the driver knows + * the SPC is going into a freeze but before the freeze is fully + * settled. Generally an error interrupt. + * + * This event will pull the engine out of running so no more entries can be + * added to the engine's queue. + */ +void sdma_freeze_notify(struct hfi1_devdata *dd, int link_down) +{ + int i; + enum sdma_events event = link_down ? sdma_event_e85_link_down : + sdma_event_e80_hw_freeze; + + /* set up the wait but do not wait here */ + atomic_set(&dd->sdma_unfreeze_count, dd->num_sdma); + + /* tell all engines to stop running and wait */ + for (i = 0; i < dd->num_sdma; i++) + sdma_process_event(&dd->per_sdma[i], event); + + /* sdma_freeze() will wait for all engines to have stopped */ +} + +/* + * SPC freeze handling for SDMA engines. Called when the driver knows + * the SPC is fully frozen. + */ +void sdma_freeze(struct hfi1_devdata *dd) +{ + int i; + int ret; + + /* + * Make sure all engines have moved out of the running state before + * continuing. + */ + ret = wait_event_interruptible(dd->sdma_unfreeze_wq, + atomic_read(&dd->sdma_unfreeze_count) <= 0); + /* interrupted or count is negative, then unloading - just exit */ + if (ret || atomic_read(&dd->sdma_unfreeze_count) < 0) + return; + + /* set up the count for the next wait */ + atomic_set(&dd->sdma_unfreeze_count, dd->num_sdma); + + /* tell all engines that the SPC is frozen, they can start cleaning */ + for (i = 0; i < dd->num_sdma; i++) + sdma_process_event(&dd->per_sdma[i], sdma_event_e81_hw_frozen); + + /* + * Wait for everyone to finish software clean before exiting. The + * software clean will read engine CSRs, so must be completed before + * the next step, which will clear the engine CSRs. + */ + (void) wait_event_interruptible(dd->sdma_unfreeze_wq, + atomic_read(&dd->sdma_unfreeze_count) <= 0); + /* no need to check results - done no matter what */ +} + +/* + * SPC freeze handling for the SDMA engines. Called after the SPC is unfrozen. + * + * The SPC freeze acts like a SDMA halt and a hardware clean combined. All + * that is left is a software clean. We could do it after the SPC is fully + * frozen, but then we'd have to add another state to wait for the unfreeze. + * Instead, just defer the software clean until the unfreeze step. + */ +void sdma_unfreeze(struct hfi1_devdata *dd) +{ + int i; + + /* tell all engines start freeze clean up */ + for (i = 0; i < dd->num_sdma; i++) + sdma_process_event(&dd->per_sdma[i], + sdma_event_e82_hw_unfreeze); +} + +/** + * _sdma_engine_progress_schedule() - schedule progress on engine + * @sde: sdma_engine to schedule progress + * + */ +void _sdma_engine_progress_schedule( + struct sdma_engine *sde) +{ + trace_hfi1_sdma_engine_progress(sde, sde->progress_mask); + /* assume we have selected a good cpu */ + write_csr(sde->dd, + CCE_INT_FORCE + (8*(IS_SDMA_START/64)), sde->progress_mask); +} diff --git a/drivers/staging/rdma/hfi1/sdma.h b/drivers/staging/rdma/hfi1/sdma.h new file mode 100644 index 000000000000..1e613fcd8f4c --- /dev/null +++ b/drivers/staging/rdma/hfi1/sdma.h @@ -0,0 +1,1123 @@ +#ifndef _HFI1_SDMA_H +#define _HFI1_SDMA_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/types.h> +#include <linux/list.h> +#include <asm/byteorder.h> +#include <linux/workqueue.h> +#include <linux/rculist.h> + +#include "hfi.h" +#include "verbs.h" + +/* increased for AHG */ +#define NUM_DESC 6 +/* Hardware limit */ +#define MAX_DESC 64 +/* Hardware limit for SDMA packet size */ +#define MAX_SDMA_PKT_SIZE ((16 * 1024) - 1) + + +#define SDMA_TXREQ_S_OK 0 +#define SDMA_TXREQ_S_SENDERROR 1 +#define SDMA_TXREQ_S_ABORTED 2 +#define SDMA_TXREQ_S_SHUTDOWN 3 + +/* flags bits */ +#define SDMA_TXREQ_F_URGENT 0x0001 +#define SDMA_TXREQ_F_AHG_COPY 0x0002 +#define SDMA_TXREQ_F_USE_AHG 0x0004 + +#define SDMA_MAP_NONE 0 +#define SDMA_MAP_SINGLE 1 +#define SDMA_MAP_PAGE 2 + +#define SDMA_AHG_VALUE_MASK 0xffff +#define SDMA_AHG_VALUE_SHIFT 0 +#define SDMA_AHG_INDEX_MASK 0xf +#define SDMA_AHG_INDEX_SHIFT 16 +#define SDMA_AHG_FIELD_LEN_MASK 0xf +#define SDMA_AHG_FIELD_LEN_SHIFT 20 +#define SDMA_AHG_FIELD_START_MASK 0x1f +#define SDMA_AHG_FIELD_START_SHIFT 24 +#define SDMA_AHG_UPDATE_ENABLE_MASK 0x1 +#define SDMA_AHG_UPDATE_ENABLE_SHIFT 31 + +/* AHG modes */ + +/* + * Be aware the ordering and values + * for SDMA_AHG_APPLY_UPDATE[123] + * are assumed in generating a skip + * count in submit_tx() in sdma.c + */ +#define SDMA_AHG_NO_AHG 0 +#define SDMA_AHG_COPY 1 +#define SDMA_AHG_APPLY_UPDATE1 2 +#define SDMA_AHG_APPLY_UPDATE2 3 +#define SDMA_AHG_APPLY_UPDATE3 4 + +/* + * Bits defined in the send DMA descriptor. + */ +#define SDMA_DESC0_FIRST_DESC_FLAG (1ULL<<63) +#define SDMA_DESC0_LAST_DESC_FLAG (1ULL<<62) +#define SDMA_DESC0_BYTE_COUNT_SHIFT 48 +#define SDMA_DESC0_BYTE_COUNT_WIDTH 14 +#define SDMA_DESC0_BYTE_COUNT_MASK \ + ((1ULL<<SDMA_DESC0_BYTE_COUNT_WIDTH)-1ULL) +#define SDMA_DESC0_BYTE_COUNT_SMASK \ + (SDMA_DESC0_BYTE_COUNT_MASK<<SDMA_DESC0_BYTE_COUNT_SHIFT) +#define SDMA_DESC0_PHY_ADDR_SHIFT 0 +#define SDMA_DESC0_PHY_ADDR_WIDTH 48 +#define SDMA_DESC0_PHY_ADDR_MASK \ + ((1ULL<<SDMA_DESC0_PHY_ADDR_WIDTH)-1ULL) +#define SDMA_DESC0_PHY_ADDR_SMASK \ + (SDMA_DESC0_PHY_ADDR_MASK<<SDMA_DESC0_PHY_ADDR_SHIFT) + +#define SDMA_DESC1_HEADER_UPDATE1_SHIFT 32 +#define SDMA_DESC1_HEADER_UPDATE1_WIDTH 32 +#define SDMA_DESC1_HEADER_UPDATE1_MASK \ + ((1ULL<<SDMA_DESC1_HEADER_UPDATE1_WIDTH)-1ULL) +#define SDMA_DESC1_HEADER_UPDATE1_SMASK \ + (SDMA_DESC1_HEADER_UPDATE1_MASK<<SDMA_DESC1_HEADER_UPDATE1_SHIFT) +#define SDMA_DESC1_HEADER_MODE_SHIFT 13 +#define SDMA_DESC1_HEADER_MODE_WIDTH 3 +#define SDMA_DESC1_HEADER_MODE_MASK \ + ((1ULL<<SDMA_DESC1_HEADER_MODE_WIDTH)-1ULL) +#define SDMA_DESC1_HEADER_MODE_SMASK \ + (SDMA_DESC1_HEADER_MODE_MASK<<SDMA_DESC1_HEADER_MODE_SHIFT) +#define SDMA_DESC1_HEADER_INDEX_SHIFT 8 +#define SDMA_DESC1_HEADER_INDEX_WIDTH 5 +#define SDMA_DESC1_HEADER_INDEX_MASK \ + ((1ULL<<SDMA_DESC1_HEADER_INDEX_WIDTH)-1ULL) +#define SDMA_DESC1_HEADER_INDEX_SMASK \ + (SDMA_DESC1_HEADER_INDEX_MASK<<SDMA_DESC1_HEADER_INDEX_SHIFT) +#define SDMA_DESC1_HEADER_DWS_SHIFT 4 +#define SDMA_DESC1_HEADER_DWS_WIDTH 4 +#define SDMA_DESC1_HEADER_DWS_MASK \ + ((1ULL<<SDMA_DESC1_HEADER_DWS_WIDTH)-1ULL) +#define SDMA_DESC1_HEADER_DWS_SMASK \ + (SDMA_DESC1_HEADER_DWS_MASK<<SDMA_DESC1_HEADER_DWS_SHIFT) +#define SDMA_DESC1_GENERATION_SHIFT 2 +#define SDMA_DESC1_GENERATION_WIDTH 2 +#define SDMA_DESC1_GENERATION_MASK \ + ((1ULL<<SDMA_DESC1_GENERATION_WIDTH)-1ULL) +#define SDMA_DESC1_GENERATION_SMASK \ + (SDMA_DESC1_GENERATION_MASK<<SDMA_DESC1_GENERATION_SHIFT) +#define SDMA_DESC1_INT_REQ_FLAG (1ULL<<1) +#define SDMA_DESC1_HEAD_TO_HOST_FLAG (1ULL<<0) + +enum sdma_states { + sdma_state_s00_hw_down, + sdma_state_s10_hw_start_up_halt_wait, + sdma_state_s15_hw_start_up_clean_wait, + sdma_state_s20_idle, + sdma_state_s30_sw_clean_up_wait, + sdma_state_s40_hw_clean_up_wait, + sdma_state_s50_hw_halt_wait, + sdma_state_s60_idle_halt_wait, + sdma_state_s80_hw_freeze, + sdma_state_s82_freeze_sw_clean, + sdma_state_s99_running, +}; + +enum sdma_events { + sdma_event_e00_go_hw_down, + sdma_event_e10_go_hw_start, + sdma_event_e15_hw_halt_done, + sdma_event_e25_hw_clean_up_done, + sdma_event_e30_go_running, + sdma_event_e40_sw_cleaned, + sdma_event_e50_hw_cleaned, + sdma_event_e60_hw_halted, + sdma_event_e70_go_idle, + sdma_event_e80_hw_freeze, + sdma_event_e81_hw_frozen, + sdma_event_e82_hw_unfreeze, + sdma_event_e85_link_down, + sdma_event_e90_sw_halted, +}; + +struct sdma_set_state_action { + unsigned op_enable:1; + unsigned op_intenable:1; + unsigned op_halt:1; + unsigned op_cleanup:1; + unsigned go_s99_running_tofalse:1; + unsigned go_s99_running_totrue:1; +}; + +struct sdma_state { + struct kref kref; + struct completion comp; + enum sdma_states current_state; + unsigned current_op; + unsigned go_s99_running; + /* debugging/development */ + enum sdma_states previous_state; + unsigned previous_op; + enum sdma_events last_event; +}; + +/** + * DOC: sdma exported routines + * + * These sdma routines fit into three categories: + * - The SDMA API for building and submitting packets + * to the ring + * + * - Initialization and tear down routines to buildup + * and tear down SDMA + * + * - ISR entrances to handle interrupts, state changes + * and errors + */ + +/** + * DOC: sdma PSM/verbs API + * + * The sdma API is designed to be used by both PSM + * and verbs to supply packets to the SDMA ring. + * + * The usage of the API is as follows: + * + * Embed a struct iowait in the QP or + * PQ. The iowait should be initialized with a + * call to iowait_init(). + * + * The user of the API should create an allocation method + * for their version of the txreq. slabs, pre-allocated lists, + * and dma pools can be used. Once the user's overload of + * the sdma_txreq has been allocated, the sdma_txreq member + * must be initialized with sdma_txinit() or sdma_txinit_ahg(). + * + * The txreq must be declared with the sdma_txreq first. + * + * The tx request, once initialized, is manipulated with calls to + * sdma_txadd_daddr(), sdma_txadd_page(), or sdma_txadd_kvaddr() + * for each disjoint memory location. It is the user's responsibility + * to understand the packet boundaries and page boundaries to do the + * appropriate number of sdma_txadd_* calls.. The user + * must be prepared to deal with failures from these routines due to + * either memory allocation or dma_mapping failures. + * + * The mapping specifics for each memory location are recorded + * in the tx. Memory locations added with sdma_txadd_page() + * and sdma_txadd_kvaddr() are automatically mapped when added + * to the tx and nmapped as part of the progress processing in the + * SDMA interrupt handling. + * + * sdma_txadd_daddr() is used to add an dma_addr_t memory to the + * tx. An example of a use case would be a pre-allocated + * set of headers allocated via dma_pool_alloc() or + * dma_alloc_coherent(). For these memory locations, it + * is the responsibility of the user to handle that unmapping. + * (This would usually be at an unload or job termination.) + * + * The routine sdma_send_txreq() is used to submit + * a tx to the ring after the appropriate number of + * sdma_txadd_* have been done. + * + * If it is desired to send a burst of sdma_txreqs, sdma_send_txlist() + * can be used to submit a list of packets. + * + * The user is free to use the link overhead in the struct sdma_txreq as + * long as the tx isn't in flight. + * + * The extreme degenerate case of the number of descriptors + * exceeding the ring size is automatically handled as + * memory locations are added. An overflow of the descriptor + * array that is part of the sdma_txreq is also automatically + * handled. + * + */ + +/** + * DOC: Infrastructure calls + * + * sdma_init() is used to initialize data structures and + * CSRs for the desired number of SDMA engines. + * + * sdma_start() is used to kick the SDMA engines initialized + * with sdma_init(). Interrupts must be enabled at this + * point since aspects of the state machine are interrupt + * driven. + * + * sdma_engine_error() and sdma_engine_interrupt() are + * entrances for interrupts. + * + * sdma_map_init() is for the management of the mapping + * table when the number of vls is changed. + * + */ + +/* + * struct hw_sdma_desc - raw 128 bit SDMA descriptor + * + * This is the raw descriptor in the SDMA ring + */ +struct hw_sdma_desc { + /* private: don't use directly */ + __le64 qw[2]; +}; + +/* + * struct sdma_desc - canonical fragment descriptor + * + * This is the descriptor carried in the tx request + * corresponding to each fragment. + * + */ +struct sdma_desc { + /* private: don't use directly */ + u64 qw[2]; +}; + +struct sdma_txreq; +typedef void (*callback_t)(struct sdma_txreq *, int, int); + +/** + * struct sdma_txreq - the sdma_txreq structure (one per packet) + * @list: for use by user and by queuing for wait + * + * This is the representation of a packet which consists of some + * number of fragments. Storage is provided to within the structure. + * for all fragments. + * + * The storage for the descriptors are automatically extended as needed + * when the currently allocation is exceeded. + * + * The user (Verbs or PSM) may overload this structure with fields + * specific to their use by putting this struct first in their struct. + * The method of allocation of the overloaded structure is user dependent + * + * The list is the only public field in the structure. + * + */ + +struct sdma_txreq { + struct list_head list; + /* private: */ + struct sdma_desc *descp; + /* private: */ + void *coalesce_buf; + /* private: */ + struct iowait *wait; + /* private: */ + callback_t complete; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + u64 sn; +#endif + /* private: - used in coalesce/pad processing */ + u16 packet_len; + /* private: - down-counted to trigger last */ + u16 tlen; + /* private: flags */ + u16 flags; + /* private: */ + u16 num_desc; + /* private: */ + u16 desc_limit; + /* private: */ + u16 next_descq_idx; + /* private: */ + struct sdma_desc descs[NUM_DESC]; +}; + +struct verbs_txreq { + struct hfi1_pio_header phdr; + struct sdma_txreq txreq; + struct hfi1_qp *qp; + struct hfi1_swqe *wqe; + struct hfi1_mregion *mr; + struct hfi1_sge_state *ss; + struct sdma_engine *sde; + u16 hdr_dwords; + u16 hdr_inx; +}; + +/** + * struct sdma_engine - Data pertaining to each SDMA engine. + * @dd: a back-pointer to the device data + * @ppd: per port back-pointer + * @imask: mask for irq manipulation + * @idle_mask: mask for determining if an interrupt is due to sdma_idle + * + * This structure has the state for each sdma_engine. + * + * Accessing to non public fields are not supported + * since the private members are subject to change. + */ +struct sdma_engine { + /* read mostly */ + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + /* private: */ + void __iomem *tail_csr; + u64 imask; /* clear interrupt mask */ + u64 idle_mask; + u64 progress_mask; + /* private: */ + struct workqueue_struct *wq; + /* private: */ + volatile __le64 *head_dma; /* DMA'ed by chip */ + /* private: */ + dma_addr_t head_phys; + /* private: */ + struct hw_sdma_desc *descq; + /* private: */ + unsigned descq_full_count; + struct sdma_txreq **tx_ring; + /* private: */ + dma_addr_t descq_phys; + /* private */ + u32 sdma_mask; + /* private */ + struct sdma_state state; + /* private: */ + u8 sdma_shift; + /* private: */ + u8 this_idx; /* zero relative engine */ + /* protect changes to senddmactrl shadow */ + spinlock_t senddmactrl_lock; + /* private: */ + u64 p_senddmactrl; /* shadow per-engine SendDmaCtrl */ + + /* read/write using tail_lock */ + spinlock_t tail_lock ____cacheline_aligned_in_smp; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + /* private: */ + u64 tail_sn; +#endif + /* private: */ + u32 descq_tail; + /* private: */ + unsigned long ahg_bits; + /* private: */ + u16 desc_avail; + /* private: */ + u16 tx_tail; + /* private: */ + u16 descq_cnt; + + /* read/write using head_lock */ + /* private: */ + seqlock_t head_lock ____cacheline_aligned_in_smp; +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER + /* private: */ + u64 head_sn; +#endif + /* private: */ + u32 descq_head; + /* private: */ + u16 tx_head; + /* private: */ + u64 last_status; + + /* private: */ + struct list_head dmawait; + + /* CONFIG SDMA for now, just blindly duplicate */ + /* private: */ + struct tasklet_struct sdma_hw_clean_up_task + ____cacheline_aligned_in_smp; + + /* private: */ + struct tasklet_struct sdma_sw_clean_up_task + ____cacheline_aligned_in_smp; + /* private: */ + struct work_struct err_halt_worker; + /* private */ + struct timer_list err_progress_check_timer; + u32 progress_check_head; + /* private: */ + struct work_struct flush_worker; + spinlock_t flushlist_lock; + /* private: */ + struct list_head flushlist; +}; + + +int sdma_init(struct hfi1_devdata *dd, u8 port); +void sdma_start(struct hfi1_devdata *dd); +void sdma_exit(struct hfi1_devdata *dd); +void sdma_all_running(struct hfi1_devdata *dd); +void sdma_all_idle(struct hfi1_devdata *dd); +void sdma_freeze_notify(struct hfi1_devdata *dd, int go_idle); +void sdma_freeze(struct hfi1_devdata *dd); +void sdma_unfreeze(struct hfi1_devdata *dd); +void sdma_wait(struct hfi1_devdata *dd); + +/** + * sdma_empty() - idle engine test + * @engine: sdma engine + * + * Currently used by verbs as a latency optimization. + * + * Return: + * 1 - empty, 0 - non-empty + */ +static inline int sdma_empty(struct sdma_engine *sde) +{ + return sde->descq_tail == sde->descq_head; +} + +static inline u16 sdma_descq_freecnt(struct sdma_engine *sde) +{ + return sde->descq_cnt - + (sde->descq_tail - + ACCESS_ONCE(sde->descq_head)) - 1; +} + +static inline u16 sdma_descq_inprocess(struct sdma_engine *sde) +{ + return sde->descq_cnt - sdma_descq_freecnt(sde); +} + +/* + * Either head_lock or tail lock required to see + * a steady state. + */ +static inline int __sdma_running(struct sdma_engine *engine) +{ + return engine->state.current_state == sdma_state_s99_running; +} + + +/** + * sdma_running() - state suitability test + * @engine: sdma engine + * + * sdma_running probes the internal state to determine if it is suitable + * for submitting packets. + * + * Return: + * 1 - ok to submit, 0 - not ok to submit + * + */ +static inline int sdma_running(struct sdma_engine *engine) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&engine->tail_lock, flags); + ret = __sdma_running(engine); + spin_unlock_irqrestore(&engine->tail_lock, flags); + return ret; +} + +void _sdma_txreq_ahgadd( + struct sdma_txreq *tx, + u8 num_ahg, + u8 ahg_entry, + u32 *ahg, + u8 ahg_hlen); + + +/** + * sdma_txinit_ahg() - initialize an sdma_txreq struct with AHG + * @tx: tx request to initialize + * @flags: flags to key last descriptor additions + * @tlen: total packet length (pbc + headers + data) + * @ahg_entry: ahg entry to use (0 - 31) + * @num_ahg: ahg descriptor for first descriptor (0 - 9) + * @ahg: array of AHG descriptors (up to 9 entries) + * @ahg_hlen: number of bytes from ASIC entry to use + * @cb: callback + * + * The allocation of the sdma_txreq and it enclosing structure is user + * dependent. This routine must be called to initialize the user independent + * fields. + * + * The currently supported flags are SDMA_TXREQ_F_URGENT, + * SDMA_TXREQ_F_AHG_COPY, and SDMA_TXREQ_F_USE_AHG. + * + * SDMA_TXREQ_F_URGENT is used for latency sensitive situations where the + * completion is desired as soon as possible. + * + * SDMA_TXREQ_F_AHG_COPY causes the header in the first descriptor to be + * copied to chip entry. SDMA_TXREQ_F_USE_AHG causes the code to add in + * the AHG descriptors into the first 1 to 3 descriptors. + * + * Completions of submitted requests can be gotten on selected + * txreqs by giving a completion routine callback to sdma_txinit() or + * sdma_txinit_ahg(). The environment in which the callback runs + * can be from an ISR, a tasklet, or a thread, so no sleeping + * kernel routines can be used. Aspects of the sdma ring may + * be locked so care should be taken with locking. + * + * The callback pointer can be NULL to avoid any callback for the packet + * being submitted. The callback will be provided this tx, a status, and a flag. + * + * The status will be one of SDMA_TXREQ_S_OK, SDMA_TXREQ_S_SENDERROR, + * SDMA_TXREQ_S_ABORTED, or SDMA_TXREQ_S_SHUTDOWN. + * + * The flag, if the is the iowait had been used, indicates the iowait + * sdma_busy count has reached zero. + * + * user data portion of tlen should be precise. The sdma_txadd_* entrances + * will pad with a descriptor references 1 - 3 bytes when the number of bytes + * specified in tlen have been supplied to the sdma_txreq. + * + * ahg_hlen is used to determine the number of on-chip entry bytes to + * use as the header. This is for cases where the stored header is + * larger than the header to be used in a packet. This is typical + * for verbs where an RDMA_WRITE_FIRST is larger than the packet in + * and RDMA_WRITE_MIDDLE. + * + */ +static inline int sdma_txinit_ahg( + struct sdma_txreq *tx, + u16 flags, + u16 tlen, + u8 ahg_entry, + u8 num_ahg, + u32 *ahg, + u8 ahg_hlen, + void (*cb)(struct sdma_txreq *, int, int)) +{ + if (tlen == 0) + return -ENODATA; + if (tlen > MAX_SDMA_PKT_SIZE) + return -EMSGSIZE; + tx->desc_limit = ARRAY_SIZE(tx->descs); + tx->descp = &tx->descs[0]; + INIT_LIST_HEAD(&tx->list); + tx->num_desc = 0; + tx->flags = flags; + tx->complete = cb; + tx->coalesce_buf = NULL; + tx->wait = NULL; + tx->tlen = tx->packet_len = tlen; + tx->descs[0].qw[0] = SDMA_DESC0_FIRST_DESC_FLAG; + tx->descs[0].qw[1] = 0; + if (flags & SDMA_TXREQ_F_AHG_COPY) + tx->descs[0].qw[1] |= + (((u64)ahg_entry & SDMA_DESC1_HEADER_INDEX_MASK) + << SDMA_DESC1_HEADER_INDEX_SHIFT) | + (((u64)SDMA_AHG_COPY & SDMA_DESC1_HEADER_MODE_MASK) + << SDMA_DESC1_HEADER_MODE_SHIFT); + else if (flags & SDMA_TXREQ_F_USE_AHG && num_ahg) + _sdma_txreq_ahgadd(tx, num_ahg, ahg_entry, ahg, ahg_hlen); + return 0; +} + +/** + * sdma_txinit() - initialize an sdma_txreq struct (no AHG) + * @tx: tx request to initialize + * @flags: flags to key last descriptor additions + * @tlen: total packet length (pbc + headers + data) + * @cb: callback pointer + * + * The allocation of the sdma_txreq and it enclosing structure is user + * dependent. This routine must be called to initialize the user + * independent fields. + * + * The currently supported flags is SDMA_TXREQ_F_URGENT. + * + * SDMA_TXREQ_F_URGENT is used for latency sensitive situations where the + * completion is desired as soon as possible. + * + * Completions of submitted requests can be gotten on selected + * txreqs by giving a completion routine callback to sdma_txinit() or + * sdma_txinit_ahg(). The environment in which the callback runs + * can be from an ISR, a tasklet, or a thread, so no sleeping + * kernel routines can be used. The head size of the sdma ring may + * be locked so care should be taken with locking. + * + * The callback pointer can be NULL to avoid any callback for the packet + * being submitted. + * + * The callback, if non-NULL, will be provided this tx and a status. The + * status will be one of SDMA_TXREQ_S_OK, SDMA_TXREQ_S_SENDERROR, + * SDMA_TXREQ_S_ABORTED, or SDMA_TXREQ_S_SHUTDOWN. + * + */ +static inline int sdma_txinit( + struct sdma_txreq *tx, + u16 flags, + u16 tlen, + void (*cb)(struct sdma_txreq *, int, int)) +{ + return sdma_txinit_ahg(tx, flags, tlen, 0, 0, NULL, 0, cb); +} + +/* helpers - don't use */ +static inline int sdma_mapping_type(struct sdma_desc *d) +{ + return (d->qw[1] & SDMA_DESC1_GENERATION_SMASK) + >> SDMA_DESC1_GENERATION_SHIFT; +} + +static inline size_t sdma_mapping_len(struct sdma_desc *d) +{ + return (d->qw[0] & SDMA_DESC0_BYTE_COUNT_SMASK) + >> SDMA_DESC0_BYTE_COUNT_SHIFT; +} + +static inline dma_addr_t sdma_mapping_addr(struct sdma_desc *d) +{ + return (d->qw[0] & SDMA_DESC0_PHY_ADDR_SMASK) + >> SDMA_DESC0_PHY_ADDR_SHIFT; +} + +static inline void make_tx_sdma_desc( + struct sdma_txreq *tx, + int type, + dma_addr_t addr, + size_t len) +{ + struct sdma_desc *desc = &tx->descp[tx->num_desc]; + + if (!tx->num_desc) { + /* qw[0] zero; qw[1] first, ahg mode already in from init */ + desc->qw[1] |= ((u64)type & SDMA_DESC1_GENERATION_MASK) + << SDMA_DESC1_GENERATION_SHIFT; + } else { + desc->qw[0] = 0; + desc->qw[1] = ((u64)type & SDMA_DESC1_GENERATION_MASK) + << SDMA_DESC1_GENERATION_SHIFT; + } + desc->qw[0] |= (((u64)addr & SDMA_DESC0_PHY_ADDR_MASK) + << SDMA_DESC0_PHY_ADDR_SHIFT) | + (((u64)len & SDMA_DESC0_BYTE_COUNT_MASK) + << SDMA_DESC0_BYTE_COUNT_SHIFT); +} + +/* helper to extend txreq */ +int _extend_sdma_tx_descs(struct hfi1_devdata *, struct sdma_txreq *); +int _pad_sdma_tx_descs(struct hfi1_devdata *, struct sdma_txreq *); +void sdma_txclean(struct hfi1_devdata *, struct sdma_txreq *); + +/* helpers used by public routines */ +static inline void _sdma_close_tx(struct hfi1_devdata *dd, + struct sdma_txreq *tx) +{ + tx->descp[tx->num_desc].qw[0] |= + SDMA_DESC0_LAST_DESC_FLAG; + tx->descp[tx->num_desc].qw[1] |= + dd->default_desc1; + if (tx->flags & SDMA_TXREQ_F_URGENT) + tx->descp[tx->num_desc].qw[1] |= + (SDMA_DESC1_HEAD_TO_HOST_FLAG| + SDMA_DESC1_INT_REQ_FLAG); +} + +static inline int _sdma_txadd_daddr( + struct hfi1_devdata *dd, + int type, + struct sdma_txreq *tx, + dma_addr_t addr, + u16 len) +{ + int rval = 0; + + if ((unlikely(tx->num_desc == tx->desc_limit))) { + rval = _extend_sdma_tx_descs(dd, tx); + if (rval) + return rval; + } + make_tx_sdma_desc( + tx, + type, + addr, len); + WARN_ON(len > tx->tlen); + tx->tlen -= len; + /* special cases for last */ + if (!tx->tlen) { + if (tx->packet_len & (sizeof(u32) - 1)) + rval = _pad_sdma_tx_descs(dd, tx); + else + _sdma_close_tx(dd, tx); + } + tx->num_desc++; + return rval; +} + +/** + * sdma_txadd_page() - add a page to the sdma_txreq + * @dd: the device to use for mapping + * @tx: tx request to which the page is added + * @page: page to map + * @offset: offset within the page + * @len: length in bytes + * + * This is used to add a page/offset/length descriptor. + * + * The mapping/unmapping of the page/offset/len is automatically handled. + * + * Return: + * 0 - success, -ENOSPC - mapping fail, -ENOMEM - couldn't + * extend descriptor array or couldn't allocate coalesce + * buffer. + * + */ +static inline int sdma_txadd_page( + struct hfi1_devdata *dd, + struct sdma_txreq *tx, + struct page *page, + unsigned long offset, + u16 len) +{ + dma_addr_t addr = + dma_map_page( + &dd->pcidev->dev, + page, + offset, + len, + DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&dd->pcidev->dev, addr))) { + sdma_txclean(dd, tx); + return -ENOSPC; + } + return _sdma_txadd_daddr( + dd, SDMA_MAP_PAGE, tx, addr, len); +} + +/** + * sdma_txadd_daddr() - add a dma address to the sdma_txreq + * @dd: the device to use for mapping + * @tx: sdma_txreq to which the page is added + * @addr: dma address mapped by caller + * @len: length in bytes + * + * This is used to add a descriptor for memory that is already dma mapped. + * + * In this case, there is no unmapping as part of the progress processing for + * this memory location. + * + * Return: + * 0 - success, -ENOMEM - couldn't extend descriptor array + */ + +static inline int sdma_txadd_daddr( + struct hfi1_devdata *dd, + struct sdma_txreq *tx, + dma_addr_t addr, + u16 len) +{ + return _sdma_txadd_daddr(dd, SDMA_MAP_NONE, tx, addr, len); +} + +/** + * sdma_txadd_kvaddr() - add a kernel virtual address to sdma_txreq + * @dd: the device to use for mapping + * @tx: sdma_txreq to which the page is added + * @kvaddr: the kernel virtual address + * @len: length in bytes + * + * This is used to add a descriptor referenced by the indicated kvaddr and + * len. + * + * The mapping/unmapping of the kvaddr and len is automatically handled. + * + * Return: + * 0 - success, -ENOSPC - mapping fail, -ENOMEM - couldn't extend + * descriptor array + */ +static inline int sdma_txadd_kvaddr( + struct hfi1_devdata *dd, + struct sdma_txreq *tx, + void *kvaddr, + u16 len) +{ + dma_addr_t addr = + dma_map_single( + &dd->pcidev->dev, + kvaddr, + len, + DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&dd->pcidev->dev, addr))) { + sdma_txclean(dd, tx); + return -ENOSPC; + } + return _sdma_txadd_daddr( + dd, SDMA_MAP_SINGLE, tx, addr, len); +} + +struct iowait; + +int sdma_send_txreq(struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *tx); +int sdma_send_txlist(struct sdma_engine *sde, + struct iowait *wait, + struct list_head *tx_list); + +int sdma_ahg_alloc(struct sdma_engine *sde); +void sdma_ahg_free(struct sdma_engine *sde, int ahg_index); + +/** + * sdma_build_ahg - build ahg descriptor + * @data + * @dwindex + * @startbit + * @bits + * + * Build and return a 32 bit descriptor. + */ +static inline u32 sdma_build_ahg_descriptor( + u16 data, + u8 dwindex, + u8 startbit, + u8 bits) +{ + return (u32)(1UL << SDMA_AHG_UPDATE_ENABLE_SHIFT | + ((startbit & SDMA_AHG_FIELD_START_MASK) << + SDMA_AHG_FIELD_START_SHIFT) | + ((bits & SDMA_AHG_FIELD_LEN_MASK) << + SDMA_AHG_FIELD_LEN_SHIFT) | + ((dwindex & SDMA_AHG_INDEX_MASK) << + SDMA_AHG_INDEX_SHIFT) | + ((data & SDMA_AHG_VALUE_MASK) << + SDMA_AHG_VALUE_SHIFT)); +} + +/** + * sdma_progress - use seq number of detect head progress + * @sde: sdma_engine to check + * @seq: base seq count + * @tx: txreq for which we need to check descriptor availability + * + * This is used in the appropriate spot in the sleep routine + * to check for potential ring progress. This routine gets the + * seqcount before queuing the iowait structure for progress. + * + * If the seqcount indicates that progress needs to be checked, + * re-submission is detected by checking whether the descriptor + * queue has enough descriptor for the txreq. + */ +static inline unsigned sdma_progress(struct sdma_engine *sde, unsigned seq, + struct sdma_txreq *tx) +{ + if (read_seqretry(&sde->head_lock, seq)) { + sde->desc_avail = sdma_descq_freecnt(sde); + if (tx->num_desc > sde->desc_avail) + return 0; + return 1; + } + return 0; +} + +/** + * sdma_iowait_schedule() - initialize wait structure + * @sde: sdma_engine to schedule + * @wait: wait struct to schedule + * + * This function initializes the iowait + * structure embedded in the QP or PQ. + * + */ +static inline void sdma_iowait_schedule( + struct sdma_engine *sde, + struct iowait *wait) +{ + iowait_schedule(wait, sde->wq); +} + +/* for use by interrupt handling */ +void sdma_engine_error(struct sdma_engine *sde, u64 status); +void sdma_engine_interrupt(struct sdma_engine *sde, u64 status); + +/* + * + * The diagram below details the relationship of the mapping structures + * + * Since the mapping now allows for non-uniform engines per vl, the + * number of engines for a vl is either the vl_engines[vl] or + * a computation based on num_sdma/num_vls: + * + * For example: + * nactual = vl_engines ? vl_engines[vl] : num_sdma/num_vls + * + * n = roundup to next highest power of 2 using nactual + * + * In the case where there are num_sdma/num_vls doesn't divide + * evenly, the extras are added from the last vl downward. + * + * For the case where n > nactual, the engines are assigned + * in a round robin fashion wrapping back to the first engine + * for a particular vl. + * + * dd->sdma_map + * | sdma_map_elem[0] + * | +--------------------+ + * v | mask | + * sdma_vl_map |--------------------| + * +--------------------------+ | sde[0] -> eng 1 | + * | list (RCU) | |--------------------| + * |--------------------------| ->| sde[1] -> eng 2 | + * | mask | --/ |--------------------| + * |--------------------------| -/ | * | + * | actual_vls (max 8) | -/ |--------------------| + * |--------------------------| --/ | sde[n] -> eng n | + * | vls (max 8) | -/ +--------------------+ + * |--------------------------| --/ + * | map[0] |-/ + * |--------------------------| +--------------------+ + * | map[1] |--- | mask | + * |--------------------------| \---- |--------------------| + * | * | \-- | sde[0] -> eng 1+n | + * | * | \---- |--------------------| + * | * | \->| sde[1] -> eng 2+n | + * |--------------------------| |--------------------| + * | map[vls - 1] |- | * | + * +--------------------------+ \- |--------------------| + * \- | sde[m] -> eng m+n | + * \ +--------------------+ + * \- + * \ + * \- +--------------------+ + * \- | mask | + * \ |--------------------| + * \- | sde[0] -> eng 1+m+n| + * \- |--------------------| + * >| sde[1] -> eng 2+m+n| + * |--------------------| + * | * | + * |--------------------| + * | sde[o] -> eng o+m+n| + * +--------------------+ + * + */ + +/** + * struct sdma_map_elem - mapping for a vl + * @mask - selector mask + * @sde - array of engines for this vl + * + * The mask is used to "mod" the selector + * to produce index into the trailing + * array of sdes. + */ +struct sdma_map_elem { + u32 mask; + struct sdma_engine *sde[0]; +}; + +/** + * struct sdma_map_el - mapping for a vl + * @list - rcu head for free callback + * @mask - vl mask to "mod" the vl to produce an index to map array + * @actual_vls - number of vls + * @vls - number of vls rounded to next power of 2 + * @map - array of sdma_map_elem entries + * + * This is the parent mapping structure. The trailing + * members of the struct point to sdma_map_elem entries, which + * in turn point to an array of sde's for that vl. + */ +struct sdma_vl_map { + struct rcu_head list; + u32 mask; + u8 actual_vls; + u8 vls; + struct sdma_map_elem *map[0]; +}; + +int sdma_map_init( + struct hfi1_devdata *dd, + u8 port, + u8 num_vls, + u8 *vl_engines); + +/* slow path */ +void _sdma_engine_progress_schedule(struct sdma_engine *sde); + +/** + * sdma_engine_progress_schedule() - schedule progress on engine + * @sde: sdma_engine to schedule progress + * + * This is the fast path. + * + */ +static inline void sdma_engine_progress_schedule( + struct sdma_engine *sde) +{ + if (!sde || sdma_descq_inprocess(sde) < (sde->descq_cnt / 8)) + return; + _sdma_engine_progress_schedule(sde); +} + +struct sdma_engine *sdma_select_engine_sc( + struct hfi1_devdata *dd, + u32 selector, + u8 sc5); + +struct sdma_engine *sdma_select_engine_vl( + struct hfi1_devdata *dd, + u32 selector, + u8 vl); + +void sdma_seqfile_dump_sde(struct seq_file *s, struct sdma_engine *); + +#ifdef CONFIG_SDMA_VERBOSITY +void sdma_dumpstate(struct sdma_engine *); +#endif +static inline char *slashstrip(char *s) +{ + char *r = s; + + while (*s) + if (*s++ == '/') + r = s; + return r; +} + +u16 sdma_get_descq_cnt(void); + +extern uint mod_num_sdma; + +void sdma_update_lmc(struct hfi1_devdata *dd, u64 mask, u32 lid); + +#endif diff --git a/drivers/staging/rdma/hfi1/srq.c b/drivers/staging/rdma/hfi1/srq.c new file mode 100644 index 000000000000..67786d417493 --- /dev/null +++ b/drivers/staging/rdma/hfi1/srq.c @@ -0,0 +1,397 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include "verbs.h" + +/** + * hfi1_post_srq_receive - post a receive on a shared receive queue + * @ibsrq: the SRQ to post the receive on + * @wr: the list of work requests to post + * @bad_wr: A pointer to the first WR to cause a problem is put here + * + * This may be called from interrupt context. + */ +int hfi1_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + struct hfi1_srq *srq = to_isrq(ibsrq); + struct hfi1_rwq *wq; + unsigned long flags; + int ret; + + for (; wr; wr = wr->next) { + struct hfi1_rwqe *wqe; + u32 next; + int i; + + if ((unsigned) wr->num_sge > srq->rq.max_sge) { + *bad_wr = wr; + ret = -EINVAL; + goto bail; + } + + spin_lock_irqsave(&srq->rq.lock, flags); + wq = srq->rq.wq; + next = wq->head + 1; + if (next >= srq->rq.size) + next = 0; + if (next == wq->tail) { + spin_unlock_irqrestore(&srq->rq.lock, flags); + *bad_wr = wr; + ret = -ENOMEM; + goto bail; + } + + wqe = get_rwqe_ptr(&srq->rq, wq->head); + wqe->wr_id = wr->wr_id; + wqe->num_sge = wr->num_sge; + for (i = 0; i < wr->num_sge; i++) + wqe->sg_list[i] = wr->sg_list[i]; + /* Make sure queue entry is written before the head index. */ + smp_wmb(); + wq->head = next; + spin_unlock_irqrestore(&srq->rq.lock, flags); + } + ret = 0; + +bail: + return ret; +} + +/** + * hfi1_create_srq - create a shared receive queue + * @ibpd: the protection domain of the SRQ to create + * @srq_init_attr: the attributes of the SRQ + * @udata: data from libibverbs when creating a user SRQ + */ +struct ib_srq *hfi1_create_srq(struct ib_pd *ibpd, + struct ib_srq_init_attr *srq_init_attr, + struct ib_udata *udata) +{ + struct hfi1_ibdev *dev = to_idev(ibpd->device); + struct hfi1_srq *srq; + u32 sz; + struct ib_srq *ret; + + if (srq_init_attr->srq_type != IB_SRQT_BASIC) { + ret = ERR_PTR(-ENOSYS); + goto done; + } + + if (srq_init_attr->attr.max_sge == 0 || + srq_init_attr->attr.max_sge > hfi1_max_srq_sges || + srq_init_attr->attr.max_wr == 0 || + srq_init_attr->attr.max_wr > hfi1_max_srq_wrs) { + ret = ERR_PTR(-EINVAL); + goto done; + } + + srq = kmalloc(sizeof(*srq), GFP_KERNEL); + if (!srq) { + ret = ERR_PTR(-ENOMEM); + goto done; + } + + /* + * Need to use vmalloc() if we want to support large #s of entries. + */ + srq->rq.size = srq_init_attr->attr.max_wr + 1; + srq->rq.max_sge = srq_init_attr->attr.max_sge; + sz = sizeof(struct ib_sge) * srq->rq.max_sge + + sizeof(struct hfi1_rwqe); + srq->rq.wq = vmalloc_user(sizeof(struct hfi1_rwq) + srq->rq.size * sz); + if (!srq->rq.wq) { + ret = ERR_PTR(-ENOMEM); + goto bail_srq; + } + + /* + * Return the address of the RWQ as the offset to mmap. + * See hfi1_mmap() for details. + */ + if (udata && udata->outlen >= sizeof(__u64)) { + int err; + u32 s = sizeof(struct hfi1_rwq) + srq->rq.size * sz; + + srq->ip = + hfi1_create_mmap_info(dev, s, ibpd->uobject->context, + srq->rq.wq); + if (!srq->ip) { + ret = ERR_PTR(-ENOMEM); + goto bail_wq; + } + + err = ib_copy_to_udata(udata, &srq->ip->offset, + sizeof(srq->ip->offset)); + if (err) { + ret = ERR_PTR(err); + goto bail_ip; + } + } else + srq->ip = NULL; + + /* + * ib_create_srq() will initialize srq->ibsrq. + */ + spin_lock_init(&srq->rq.lock); + srq->rq.wq->head = 0; + srq->rq.wq->tail = 0; + srq->limit = srq_init_attr->attr.srq_limit; + + spin_lock(&dev->n_srqs_lock); + if (dev->n_srqs_allocated == hfi1_max_srqs) { + spin_unlock(&dev->n_srqs_lock); + ret = ERR_PTR(-ENOMEM); + goto bail_ip; + } + + dev->n_srqs_allocated++; + spin_unlock(&dev->n_srqs_lock); + + if (srq->ip) { + spin_lock_irq(&dev->pending_lock); + list_add(&srq->ip->pending_mmaps, &dev->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + } + + ret = &srq->ibsrq; + goto done; + +bail_ip: + kfree(srq->ip); +bail_wq: + vfree(srq->rq.wq); +bail_srq: + kfree(srq); +done: + return ret; +} + +/** + * hfi1_modify_srq - modify a shared receive queue + * @ibsrq: the SRQ to modify + * @attr: the new attributes of the SRQ + * @attr_mask: indicates which attributes to modify + * @udata: user data for libibverbs.so + */ +int hfi1_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask, + struct ib_udata *udata) +{ + struct hfi1_srq *srq = to_isrq(ibsrq); + struct hfi1_rwq *wq; + int ret = 0; + + if (attr_mask & IB_SRQ_MAX_WR) { + struct hfi1_rwq *owq; + struct hfi1_rwqe *p; + u32 sz, size, n, head, tail; + + /* Check that the requested sizes are below the limits. */ + if ((attr->max_wr > hfi1_max_srq_wrs) || + ((attr_mask & IB_SRQ_LIMIT) ? + attr->srq_limit : srq->limit) > attr->max_wr) { + ret = -EINVAL; + goto bail; + } + + sz = sizeof(struct hfi1_rwqe) + + srq->rq.max_sge * sizeof(struct ib_sge); + size = attr->max_wr + 1; + wq = vmalloc_user(sizeof(struct hfi1_rwq) + size * sz); + if (!wq) { + ret = -ENOMEM; + goto bail; + } + + /* Check that we can write the offset to mmap. */ + if (udata && udata->inlen >= sizeof(__u64)) { + __u64 offset_addr; + __u64 offset = 0; + + ret = ib_copy_from_udata(&offset_addr, udata, + sizeof(offset_addr)); + if (ret) + goto bail_free; + udata->outbuf = + (void __user *) (unsigned long) offset_addr; + ret = ib_copy_to_udata(udata, &offset, + sizeof(offset)); + if (ret) + goto bail_free; + } + + spin_lock_irq(&srq->rq.lock); + /* + * validate head and tail pointer values and compute + * the number of remaining WQEs. + */ + owq = srq->rq.wq; + head = owq->head; + tail = owq->tail; + if (head >= srq->rq.size || tail >= srq->rq.size) { + ret = -EINVAL; + goto bail_unlock; + } + n = head; + if (n < tail) + n += srq->rq.size - tail; + else + n -= tail; + if (size <= n) { + ret = -EINVAL; + goto bail_unlock; + } + n = 0; + p = wq->wq; + while (tail != head) { + struct hfi1_rwqe *wqe; + int i; + + wqe = get_rwqe_ptr(&srq->rq, tail); + p->wr_id = wqe->wr_id; + p->num_sge = wqe->num_sge; + for (i = 0; i < wqe->num_sge; i++) + p->sg_list[i] = wqe->sg_list[i]; + n++; + p = (struct hfi1_rwqe *)((char *)p + sz); + if (++tail >= srq->rq.size) + tail = 0; + } + srq->rq.wq = wq; + srq->rq.size = size; + wq->head = n; + wq->tail = 0; + if (attr_mask & IB_SRQ_LIMIT) + srq->limit = attr->srq_limit; + spin_unlock_irq(&srq->rq.lock); + + vfree(owq); + + if (srq->ip) { + struct hfi1_mmap_info *ip = srq->ip; + struct hfi1_ibdev *dev = to_idev(srq->ibsrq.device); + u32 s = sizeof(struct hfi1_rwq) + size * sz; + + hfi1_update_mmap_info(dev, ip, s, wq); + + /* + * Return the offset to mmap. + * See hfi1_mmap() for details. + */ + if (udata && udata->inlen >= sizeof(__u64)) { + ret = ib_copy_to_udata(udata, &ip->offset, + sizeof(ip->offset)); + if (ret) + goto bail; + } + + /* + * Put user mapping info onto the pending list + * unless it already is on the list. + */ + spin_lock_irq(&dev->pending_lock); + if (list_empty(&ip->pending_mmaps)) + list_add(&ip->pending_mmaps, + &dev->pending_mmaps); + spin_unlock_irq(&dev->pending_lock); + } + } else if (attr_mask & IB_SRQ_LIMIT) { + spin_lock_irq(&srq->rq.lock); + if (attr->srq_limit >= srq->rq.size) + ret = -EINVAL; + else + srq->limit = attr->srq_limit; + spin_unlock_irq(&srq->rq.lock); + } + goto bail; + +bail_unlock: + spin_unlock_irq(&srq->rq.lock); +bail_free: + vfree(wq); +bail: + return ret; +} + +int hfi1_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr) +{ + struct hfi1_srq *srq = to_isrq(ibsrq); + + attr->max_wr = srq->rq.size - 1; + attr->max_sge = srq->rq.max_sge; + attr->srq_limit = srq->limit; + return 0; +} + +/** + * hfi1_destroy_srq - destroy a shared receive queue + * @ibsrq: the SRQ to destroy + */ +int hfi1_destroy_srq(struct ib_srq *ibsrq) +{ + struct hfi1_srq *srq = to_isrq(ibsrq); + struct hfi1_ibdev *dev = to_idev(ibsrq->device); + + spin_lock(&dev->n_srqs_lock); + dev->n_srqs_allocated--; + spin_unlock(&dev->n_srqs_lock); + if (srq->ip) + kref_put(&srq->ip->ref, hfi1_release_mmap_info); + else + vfree(srq->rq.wq); + kfree(srq); + + return 0; +} diff --git a/drivers/staging/rdma/hfi1/sysfs.c b/drivers/staging/rdma/hfi1/sysfs.c new file mode 100644 index 000000000000..b78c72861ef9 --- /dev/null +++ b/drivers/staging/rdma/hfi1/sysfs.c @@ -0,0 +1,739 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/ctype.h> + +#include "hfi.h" +#include "mad.h" +#include "trace.h" + + +/* + * Start of per-port congestion control structures and support code + */ + +/* + * Congestion control table size followed by table entries + */ +static ssize_t read_cc_table_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t count) +{ + int ret; + struct hfi1_pportdata *ppd = + container_of(kobj, struct hfi1_pportdata, pport_cc_kobj); + struct cc_state *cc_state; + + ret = ppd->total_cct_entry * sizeof(struct ib_cc_table_entry_shadow) + + sizeof(__be16); + + if (pos > ret) + return -EINVAL; + + if (count > ret - pos) + count = ret - pos; + + if (!count) + return count; + + rcu_read_lock(); + cc_state = get_cc_state(ppd); + if (cc_state == NULL) { + rcu_read_unlock(); + return -EINVAL; + } + memcpy(buf, &cc_state->cct, count); + rcu_read_unlock(); + + return count; +} + +static void port_release(struct kobject *kobj) +{ + /* nothing to do since memory is freed by hfi1_free_devdata() */ +} + +static struct kobj_type port_cc_ktype = { + .release = port_release, +}; + +static struct bin_attribute cc_table_bin_attr = { + .attr = {.name = "cc_table_bin", .mode = 0444}, + .read = read_cc_table_bin, + .size = PAGE_SIZE, +}; + +/* + * Congestion settings: port control, control map and an array of 16 + * entries for the congestion entries - increase, timer, event log + * trigger threshold and the minimum injection rate delay. + */ +static ssize_t read_cc_setting_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t count) +{ + int ret; + struct hfi1_pportdata *ppd = + container_of(kobj, struct hfi1_pportdata, pport_cc_kobj); + struct cc_state *cc_state; + + ret = sizeof(struct opa_congestion_setting_attr_shadow); + + if (pos > ret) + return -EINVAL; + if (count > ret - pos) + count = ret - pos; + + if (!count) + return count; + + rcu_read_lock(); + cc_state = get_cc_state(ppd); + if (cc_state == NULL) { + rcu_read_unlock(); + return -EINVAL; + } + memcpy(buf, &cc_state->cong_setting, count); + rcu_read_unlock(); + + return count; +} + +static struct bin_attribute cc_setting_bin_attr = { + .attr = {.name = "cc_settings_bin", .mode = 0444}, + .read = read_cc_setting_bin, + .size = PAGE_SIZE, +}; + +/* Start sc2vl */ +#define HFI1_SC2VL_ATTR(N) \ + static struct hfi1_sc2vl_attr hfi1_sc2vl_attr_##N = { \ + .attr = { .name = __stringify(N), .mode = 0444 }, \ + .sc = N \ + } + +struct hfi1_sc2vl_attr { + struct attribute attr; + int sc; +}; + +HFI1_SC2VL_ATTR(0); +HFI1_SC2VL_ATTR(1); +HFI1_SC2VL_ATTR(2); +HFI1_SC2VL_ATTR(3); +HFI1_SC2VL_ATTR(4); +HFI1_SC2VL_ATTR(5); +HFI1_SC2VL_ATTR(6); +HFI1_SC2VL_ATTR(7); +HFI1_SC2VL_ATTR(8); +HFI1_SC2VL_ATTR(9); +HFI1_SC2VL_ATTR(10); +HFI1_SC2VL_ATTR(11); +HFI1_SC2VL_ATTR(12); +HFI1_SC2VL_ATTR(13); +HFI1_SC2VL_ATTR(14); +HFI1_SC2VL_ATTR(15); +HFI1_SC2VL_ATTR(16); +HFI1_SC2VL_ATTR(17); +HFI1_SC2VL_ATTR(18); +HFI1_SC2VL_ATTR(19); +HFI1_SC2VL_ATTR(20); +HFI1_SC2VL_ATTR(21); +HFI1_SC2VL_ATTR(22); +HFI1_SC2VL_ATTR(23); +HFI1_SC2VL_ATTR(24); +HFI1_SC2VL_ATTR(25); +HFI1_SC2VL_ATTR(26); +HFI1_SC2VL_ATTR(27); +HFI1_SC2VL_ATTR(28); +HFI1_SC2VL_ATTR(29); +HFI1_SC2VL_ATTR(30); +HFI1_SC2VL_ATTR(31); + + +static struct attribute *sc2vl_default_attributes[] = { + &hfi1_sc2vl_attr_0.attr, + &hfi1_sc2vl_attr_1.attr, + &hfi1_sc2vl_attr_2.attr, + &hfi1_sc2vl_attr_3.attr, + &hfi1_sc2vl_attr_4.attr, + &hfi1_sc2vl_attr_5.attr, + &hfi1_sc2vl_attr_6.attr, + &hfi1_sc2vl_attr_7.attr, + &hfi1_sc2vl_attr_8.attr, + &hfi1_sc2vl_attr_9.attr, + &hfi1_sc2vl_attr_10.attr, + &hfi1_sc2vl_attr_11.attr, + &hfi1_sc2vl_attr_12.attr, + &hfi1_sc2vl_attr_13.attr, + &hfi1_sc2vl_attr_14.attr, + &hfi1_sc2vl_attr_15.attr, + &hfi1_sc2vl_attr_16.attr, + &hfi1_sc2vl_attr_17.attr, + &hfi1_sc2vl_attr_18.attr, + &hfi1_sc2vl_attr_19.attr, + &hfi1_sc2vl_attr_20.attr, + &hfi1_sc2vl_attr_21.attr, + &hfi1_sc2vl_attr_22.attr, + &hfi1_sc2vl_attr_23.attr, + &hfi1_sc2vl_attr_24.attr, + &hfi1_sc2vl_attr_25.attr, + &hfi1_sc2vl_attr_26.attr, + &hfi1_sc2vl_attr_27.attr, + &hfi1_sc2vl_attr_28.attr, + &hfi1_sc2vl_attr_29.attr, + &hfi1_sc2vl_attr_30.attr, + &hfi1_sc2vl_attr_31.attr, + NULL +}; + +static ssize_t sc2vl_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct hfi1_sc2vl_attr *sattr = + container_of(attr, struct hfi1_sc2vl_attr, attr); + struct hfi1_pportdata *ppd = + container_of(kobj, struct hfi1_pportdata, sc2vl_kobj); + struct hfi1_devdata *dd = ppd->dd; + + return sprintf(buf, "%u\n", *((u8 *)dd->sc2vl + sattr->sc)); +} + +static const struct sysfs_ops hfi1_sc2vl_ops = { + .show = sc2vl_attr_show, +}; + +static struct kobj_type hfi1_sc2vl_ktype = { + .release = port_release, + .sysfs_ops = &hfi1_sc2vl_ops, + .default_attrs = sc2vl_default_attributes +}; + +/* End sc2vl */ + +/* Start sl2sc */ +#define HFI1_SL2SC_ATTR(N) \ + static struct hfi1_sl2sc_attr hfi1_sl2sc_attr_##N = { \ + .attr = { .name = __stringify(N), .mode = 0444 }, \ + .sl = N \ + } + +struct hfi1_sl2sc_attr { + struct attribute attr; + int sl; +}; + +HFI1_SL2SC_ATTR(0); +HFI1_SL2SC_ATTR(1); +HFI1_SL2SC_ATTR(2); +HFI1_SL2SC_ATTR(3); +HFI1_SL2SC_ATTR(4); +HFI1_SL2SC_ATTR(5); +HFI1_SL2SC_ATTR(6); +HFI1_SL2SC_ATTR(7); +HFI1_SL2SC_ATTR(8); +HFI1_SL2SC_ATTR(9); +HFI1_SL2SC_ATTR(10); +HFI1_SL2SC_ATTR(11); +HFI1_SL2SC_ATTR(12); +HFI1_SL2SC_ATTR(13); +HFI1_SL2SC_ATTR(14); +HFI1_SL2SC_ATTR(15); +HFI1_SL2SC_ATTR(16); +HFI1_SL2SC_ATTR(17); +HFI1_SL2SC_ATTR(18); +HFI1_SL2SC_ATTR(19); +HFI1_SL2SC_ATTR(20); +HFI1_SL2SC_ATTR(21); +HFI1_SL2SC_ATTR(22); +HFI1_SL2SC_ATTR(23); +HFI1_SL2SC_ATTR(24); +HFI1_SL2SC_ATTR(25); +HFI1_SL2SC_ATTR(26); +HFI1_SL2SC_ATTR(27); +HFI1_SL2SC_ATTR(28); +HFI1_SL2SC_ATTR(29); +HFI1_SL2SC_ATTR(30); +HFI1_SL2SC_ATTR(31); + + +static struct attribute *sl2sc_default_attributes[] = { + &hfi1_sl2sc_attr_0.attr, + &hfi1_sl2sc_attr_1.attr, + &hfi1_sl2sc_attr_2.attr, + &hfi1_sl2sc_attr_3.attr, + &hfi1_sl2sc_attr_4.attr, + &hfi1_sl2sc_attr_5.attr, + &hfi1_sl2sc_attr_6.attr, + &hfi1_sl2sc_attr_7.attr, + &hfi1_sl2sc_attr_8.attr, + &hfi1_sl2sc_attr_9.attr, + &hfi1_sl2sc_attr_10.attr, + &hfi1_sl2sc_attr_11.attr, + &hfi1_sl2sc_attr_12.attr, + &hfi1_sl2sc_attr_13.attr, + &hfi1_sl2sc_attr_14.attr, + &hfi1_sl2sc_attr_15.attr, + &hfi1_sl2sc_attr_16.attr, + &hfi1_sl2sc_attr_17.attr, + &hfi1_sl2sc_attr_18.attr, + &hfi1_sl2sc_attr_19.attr, + &hfi1_sl2sc_attr_20.attr, + &hfi1_sl2sc_attr_21.attr, + &hfi1_sl2sc_attr_22.attr, + &hfi1_sl2sc_attr_23.attr, + &hfi1_sl2sc_attr_24.attr, + &hfi1_sl2sc_attr_25.attr, + &hfi1_sl2sc_attr_26.attr, + &hfi1_sl2sc_attr_27.attr, + &hfi1_sl2sc_attr_28.attr, + &hfi1_sl2sc_attr_29.attr, + &hfi1_sl2sc_attr_30.attr, + &hfi1_sl2sc_attr_31.attr, + NULL +}; + +static ssize_t sl2sc_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct hfi1_sl2sc_attr *sattr = + container_of(attr, struct hfi1_sl2sc_attr, attr); + struct hfi1_pportdata *ppd = + container_of(kobj, struct hfi1_pportdata, sl2sc_kobj); + struct hfi1_ibport *ibp = &ppd->ibport_data; + + return sprintf(buf, "%u\n", ibp->sl_to_sc[sattr->sl]); +} + +static const struct sysfs_ops hfi1_sl2sc_ops = { + .show = sl2sc_attr_show, +}; + +static struct kobj_type hfi1_sl2sc_ktype = { + .release = port_release, + .sysfs_ops = &hfi1_sl2sc_ops, + .default_attrs = sl2sc_default_attributes +}; + +/* End sl2sc */ + +/* Start vl2mtu */ + +#define HFI1_VL2MTU_ATTR(N) \ + static struct hfi1_vl2mtu_attr hfi1_vl2mtu_attr_##N = { \ + .attr = { .name = __stringify(N), .mode = 0444 }, \ + .vl = N \ + } + +struct hfi1_vl2mtu_attr { + struct attribute attr; + int vl; +}; + +HFI1_VL2MTU_ATTR(0); +HFI1_VL2MTU_ATTR(1); +HFI1_VL2MTU_ATTR(2); +HFI1_VL2MTU_ATTR(3); +HFI1_VL2MTU_ATTR(4); +HFI1_VL2MTU_ATTR(5); +HFI1_VL2MTU_ATTR(6); +HFI1_VL2MTU_ATTR(7); +HFI1_VL2MTU_ATTR(8); +HFI1_VL2MTU_ATTR(9); +HFI1_VL2MTU_ATTR(10); +HFI1_VL2MTU_ATTR(11); +HFI1_VL2MTU_ATTR(12); +HFI1_VL2MTU_ATTR(13); +HFI1_VL2MTU_ATTR(14); +HFI1_VL2MTU_ATTR(15); + +static struct attribute *vl2mtu_default_attributes[] = { + &hfi1_vl2mtu_attr_0.attr, + &hfi1_vl2mtu_attr_1.attr, + &hfi1_vl2mtu_attr_2.attr, + &hfi1_vl2mtu_attr_3.attr, + &hfi1_vl2mtu_attr_4.attr, + &hfi1_vl2mtu_attr_5.attr, + &hfi1_vl2mtu_attr_6.attr, + &hfi1_vl2mtu_attr_7.attr, + &hfi1_vl2mtu_attr_8.attr, + &hfi1_vl2mtu_attr_9.attr, + &hfi1_vl2mtu_attr_10.attr, + &hfi1_vl2mtu_attr_11.attr, + &hfi1_vl2mtu_attr_12.attr, + &hfi1_vl2mtu_attr_13.attr, + &hfi1_vl2mtu_attr_14.attr, + &hfi1_vl2mtu_attr_15.attr, + NULL +}; + +static ssize_t vl2mtu_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct hfi1_vl2mtu_attr *vlattr = + container_of(attr, struct hfi1_vl2mtu_attr, attr); + struct hfi1_pportdata *ppd = + container_of(kobj, struct hfi1_pportdata, vl2mtu_kobj); + struct hfi1_devdata *dd = ppd->dd; + + return sprintf(buf, "%u\n", dd->vld[vlattr->vl].mtu); +} + +static const struct sysfs_ops hfi1_vl2mtu_ops = { + .show = vl2mtu_attr_show, +}; + +static struct kobj_type hfi1_vl2mtu_ktype = { + .release = port_release, + .sysfs_ops = &hfi1_vl2mtu_ops, + .default_attrs = vl2mtu_default_attributes +}; + + +/* end of per-port file structures and support code */ + +/* + * Start of per-unit (or driver, in some cases, but replicated + * per unit) functions (these get a device *) + */ +static ssize_t show_rev(struct device *device, struct device_attribute *attr, + char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + + return sprintf(buf, "%x\n", dd_from_dev(dev)->minrev); +} + +static ssize_t show_hfi(struct device *device, struct device_attribute *attr, + char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + int ret; + + if (!dd->boardname) + ret = -EINVAL; + else + ret = scnprintf(buf, PAGE_SIZE, "%s\n", dd->boardname); + return ret; +} + +static ssize_t show_boardversion(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + + /* The string printed here is already newline-terminated. */ + return scnprintf(buf, PAGE_SIZE, "%s", dd->boardversion); +} + + +static ssize_t show_nctxts(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + + /* + * Return the smaller of send and receive contexts. + * Normally, user level applications would require both a send + * and a receive context, so returning the smaller of the two counts + * give a more accurate picture of total contexts available. + */ + return scnprintf(buf, PAGE_SIZE, "%u\n", + min(dd->num_rcv_contexts - dd->first_user_ctxt, + (u32)dd->sc_sizes[SC_USER].count)); +} + +static ssize_t show_nfreectxts(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + + /* Return the number of free user ports (contexts) available. */ + return scnprintf(buf, PAGE_SIZE, "%u\n", dd->freectxts); +} + +static ssize_t show_serial(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + + return scnprintf(buf, PAGE_SIZE, "%s", dd->serial); + +} + +static ssize_t store_chip_reset(struct device *device, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + int ret; + + if (count < 5 || memcmp(buf, "reset", 5) || !dd->diag_client) { + ret = -EINVAL; + goto bail; + } + + ret = hfi1_reset_device(dd->unit); +bail: + return ret < 0 ? ret : count; +} + +/* + * Convert the reported temperature from an integer (reported in + * units of 0.25C) to a floating point number. + */ +#define temp2str(temp, buf, size, idx) \ + scnprintf((buf) + (idx), (size) - (idx), "%u.%02u ", \ + ((temp) >> 2), ((temp) & 0x3) * 25) + +/* + * Dump tempsense values, in decimal, to ease shell-scripts. + */ +static ssize_t show_tempsense(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct hfi1_ibdev *dev = + container_of(device, struct hfi1_ibdev, ibdev.dev); + struct hfi1_devdata *dd = dd_from_dev(dev); + struct hfi1_temp temp; + int ret = -ENXIO; + + ret = hfi1_tempsense_rd(dd, &temp); + if (!ret) { + int idx = 0; + + idx += temp2str(temp.curr, buf, PAGE_SIZE, idx); + idx += temp2str(temp.lo_lim, buf, PAGE_SIZE, idx); + idx += temp2str(temp.hi_lim, buf, PAGE_SIZE, idx); + idx += temp2str(temp.crit_lim, buf, PAGE_SIZE, idx); + idx += scnprintf(buf + idx, PAGE_SIZE - idx, + "%u %u %u\n", temp.triggers & 0x1, + temp.triggers & 0x2, temp.triggers & 0x4); + ret = idx; + } + return ret; +} + +/* + * end of per-unit (or driver, in some cases, but replicated + * per unit) functions + */ + +/* start of per-unit file structures and support code */ +static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); +static DEVICE_ATTR(board_id, S_IRUGO, show_hfi, NULL); +static DEVICE_ATTR(nctxts, S_IRUGO, show_nctxts, NULL); +static DEVICE_ATTR(nfreectxts, S_IRUGO, show_nfreectxts, NULL); +static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL); +static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL); +static DEVICE_ATTR(tempsense, S_IRUGO, show_tempsense, NULL); +static DEVICE_ATTR(chip_reset, S_IWUSR, NULL, store_chip_reset); + +static struct device_attribute *hfi1_attributes[] = { + &dev_attr_hw_rev, + &dev_attr_board_id, + &dev_attr_nctxts, + &dev_attr_nfreectxts, + &dev_attr_serial, + &dev_attr_boardversion, + &dev_attr_tempsense, + &dev_attr_chip_reset, +}; + +int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num, + struct kobject *kobj) +{ + struct hfi1_pportdata *ppd; + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + int ret; + + if (!port_num || port_num > dd->num_pports) { + dd_dev_err(dd, + "Skipping infiniband class with invalid port %u\n", + port_num); + return -ENODEV; + } + ppd = &dd->pport[port_num - 1]; + + ret = kobject_init_and_add(&ppd->sc2vl_kobj, &hfi1_sc2vl_ktype, kobj, + "sc2vl"); + if (ret) { + dd_dev_err(dd, + "Skipping sc2vl sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail; + } + kobject_uevent(&ppd->sc2vl_kobj, KOBJ_ADD); + + ret = kobject_init_and_add(&ppd->sl2sc_kobj, &hfi1_sl2sc_ktype, kobj, + "sl2sc"); + if (ret) { + dd_dev_err(dd, + "Skipping sl2sc sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail_sc2vl; + } + kobject_uevent(&ppd->sl2sc_kobj, KOBJ_ADD); + + ret = kobject_init_and_add(&ppd->vl2mtu_kobj, &hfi1_vl2mtu_ktype, kobj, + "vl2mtu"); + if (ret) { + dd_dev_err(dd, + "Skipping vl2mtu sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail_sl2sc; + } + kobject_uevent(&ppd->vl2mtu_kobj, KOBJ_ADD); + + + ret = kobject_init_and_add(&ppd->pport_cc_kobj, &port_cc_ktype, + kobj, "CCMgtA"); + if (ret) { + dd_dev_err(dd, + "Skipping Congestion Control sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail_vl2mtu; + } + + kobject_uevent(&ppd->pport_cc_kobj, KOBJ_ADD); + + ret = sysfs_create_bin_file(&ppd->pport_cc_kobj, + &cc_setting_bin_attr); + if (ret) { + dd_dev_err(dd, + "Skipping Congestion Control setting sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail_cc; + } + + ret = sysfs_create_bin_file(&ppd->pport_cc_kobj, + &cc_table_bin_attr); + if (ret) { + dd_dev_err(dd, + "Skipping Congestion Control table sysfs info, (err %d) port %u\n", + ret, port_num); + goto bail_cc_entry_bin; + } + + dd_dev_info(dd, + "IB%u: Congestion Control Agent enabled for port %d\n", + dd->unit, port_num); + + return 0; + +bail_cc_entry_bin: + sysfs_remove_bin_file(&ppd->pport_cc_kobj, + &cc_setting_bin_attr); +bail_cc: + kobject_put(&ppd->pport_cc_kobj); +bail_vl2mtu: + kobject_put(&ppd->vl2mtu_kobj); +bail_sl2sc: + kobject_put(&ppd->sl2sc_kobj); +bail_sc2vl: + kobject_put(&ppd->sc2vl_kobj); +bail: + return ret; +} + +/* + * Register and create our files in /sys/class/infiniband. + */ +int hfi1_verbs_register_sysfs(struct hfi1_devdata *dd) +{ + struct ib_device *dev = &dd->verbs_dev.ibdev; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(hfi1_attributes); ++i) { + ret = device_create_file(&dev->dev, hfi1_attributes[i]); + if (ret) + goto bail; + } + + return 0; +bail: + for (i = 0; i < ARRAY_SIZE(hfi1_attributes); ++i) + device_remove_file(&dev->dev, hfi1_attributes[i]); + return ret; +} + +/* + * Unregister and remove our files in /sys/class/infiniband. + */ +void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int i; + + for (i = 0; i < dd->num_pports; i++) { + ppd = &dd->pport[i]; + + sysfs_remove_bin_file(&ppd->pport_cc_kobj, + &cc_setting_bin_attr); + sysfs_remove_bin_file(&ppd->pport_cc_kobj, + &cc_table_bin_attr); + kobject_put(&ppd->pport_cc_kobj); + kobject_put(&ppd->vl2mtu_kobj); + kobject_put(&ppd->sl2sc_kobj); + kobject_put(&ppd->sc2vl_kobj); + } +} diff --git a/drivers/staging/rdma/hfi1/trace.c b/drivers/staging/rdma/hfi1/trace.c new file mode 100644 index 000000000000..70ad7b9fc1ce --- /dev/null +++ b/drivers/staging/rdma/hfi1/trace.c @@ -0,0 +1,221 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#define CREATE_TRACE_POINTS +#include "trace.h" + +u8 ibhdr_exhdr_len(struct hfi1_ib_header *hdr) +{ + struct hfi1_other_headers *ohdr; + u8 opcode; + u8 lnh = (u8)(be16_to_cpu(hdr->lrh[0]) & 3); + + if (lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else + ohdr = &hdr->u.l.oth; + opcode = be32_to_cpu(ohdr->bth[0]) >> 24; + return hdr_len_by_opcode[opcode] == 0 ? + 0 : hdr_len_by_opcode[opcode] - (12 + 8); +} + +#define IMM_PRN "imm %d" +#define RETH_PRN "reth vaddr 0x%.16llx rkey 0x%.8x dlen 0x%.8x" +#define AETH_PRN "aeth syn 0x%.2x msn 0x%.8x" +#define DETH_PRN "deth qkey 0x%.8x sqpn 0x%.6x" +#define ATOMICACKETH_PRN "origdata %lld" +#define ATOMICETH_PRN "vaddr 0x%llx rkey 0x%.8x sdata %lld cdata %lld" + +#define OP(transport, op) IB_OPCODE_## transport ## _ ## op + +static u64 ib_u64_get(__be32 *p) +{ + return ((u64)be32_to_cpu(p[0]) << 32) | be32_to_cpu(p[1]); +} + +const char *parse_everbs_hdrs( + struct trace_seq *p, + u8 opcode, + void *ehdrs) +{ + union ib_ehdrs *eh = ehdrs; + const char *ret = trace_seq_buffer_ptr(p); + + switch (opcode) { + /* imm */ + case OP(RC, SEND_LAST_WITH_IMMEDIATE): + case OP(UC, SEND_LAST_WITH_IMMEDIATE): + case OP(RC, SEND_ONLY_WITH_IMMEDIATE): + case OP(UC, SEND_ONLY_WITH_IMMEDIATE): + case OP(RC, RDMA_WRITE_LAST_WITH_IMMEDIATE): + case OP(UC, RDMA_WRITE_LAST_WITH_IMMEDIATE): + trace_seq_printf(p, IMM_PRN, + be32_to_cpu(eh->imm_data)); + break; + /* reth + imm */ + case OP(RC, RDMA_WRITE_ONLY_WITH_IMMEDIATE): + case OP(UC, RDMA_WRITE_ONLY_WITH_IMMEDIATE): + trace_seq_printf(p, RETH_PRN " " IMM_PRN, + (unsigned long long)ib_u64_get( + (__be32 *)&eh->rc.reth.vaddr), + be32_to_cpu(eh->rc.reth.rkey), + be32_to_cpu(eh->rc.reth.length), + be32_to_cpu(eh->rc.imm_data)); + break; + /* reth */ + case OP(RC, RDMA_READ_REQUEST): + case OP(RC, RDMA_WRITE_FIRST): + case OP(UC, RDMA_WRITE_FIRST): + case OP(RC, RDMA_WRITE_ONLY): + case OP(UC, RDMA_WRITE_ONLY): + trace_seq_printf(p, RETH_PRN, + (unsigned long long)ib_u64_get( + (__be32 *)&eh->rc.reth.vaddr), + be32_to_cpu(eh->rc.reth.rkey), + be32_to_cpu(eh->rc.reth.length)); + break; + case OP(RC, RDMA_READ_RESPONSE_FIRST): + case OP(RC, RDMA_READ_RESPONSE_LAST): + case OP(RC, RDMA_READ_RESPONSE_ONLY): + case OP(RC, ACKNOWLEDGE): + trace_seq_printf(p, AETH_PRN, + be32_to_cpu(eh->aeth) >> 24, + be32_to_cpu(eh->aeth) & HFI1_QPN_MASK); + break; + /* aeth + atomicacketh */ + case OP(RC, ATOMIC_ACKNOWLEDGE): + trace_seq_printf(p, AETH_PRN " " ATOMICACKETH_PRN, + (be32_to_cpu(eh->at.aeth) >> 24) & 0xff, + be32_to_cpu(eh->at.aeth) & HFI1_QPN_MASK, + (unsigned long long)ib_u64_get(eh->at.atomic_ack_eth)); + break; + /* atomiceth */ + case OP(RC, COMPARE_SWAP): + case OP(RC, FETCH_ADD): + trace_seq_printf(p, ATOMICETH_PRN, + (unsigned long long)ib_u64_get(eh->atomic_eth.vaddr), + eh->atomic_eth.rkey, + (unsigned long long)ib_u64_get( + (__be32 *)&eh->atomic_eth.swap_data), + (unsigned long long) ib_u64_get( + (__be32 *)&eh->atomic_eth.compare_data)); + break; + /* deth */ + case OP(UD, SEND_ONLY): + case OP(UD, SEND_ONLY_WITH_IMMEDIATE): + trace_seq_printf(p, DETH_PRN, + be32_to_cpu(eh->ud.deth[0]), + be32_to_cpu(eh->ud.deth[1]) & HFI1_QPN_MASK); + break; + } + trace_seq_putc(p, 0); + return ret; +} + +const char *parse_sdma_flags( + struct trace_seq *p, + u64 desc0, u64 desc1) +{ + const char *ret = trace_seq_buffer_ptr(p); + char flags[5] = { 'x', 'x', 'x', 'x', 0 }; + + flags[0] = (desc1 & SDMA_DESC1_INT_REQ_FLAG) ? 'I' : '-'; + flags[1] = (desc1 & SDMA_DESC1_HEAD_TO_HOST_FLAG) ? 'H' : '-'; + flags[2] = (desc0 & SDMA_DESC0_FIRST_DESC_FLAG) ? 'F' : '-'; + flags[3] = (desc0 & SDMA_DESC0_LAST_DESC_FLAG) ? 'L' : '-'; + trace_seq_printf(p, "%s", flags); + if (desc0 & SDMA_DESC0_FIRST_DESC_FLAG) + trace_seq_printf(p, " amode:%u aidx:%u alen:%u", + (u8)((desc1 >> SDMA_DESC1_HEADER_MODE_SHIFT) + & SDMA_DESC1_HEADER_MODE_MASK), + (u8)((desc1 >> SDMA_DESC1_HEADER_INDEX_SHIFT) + & SDMA_DESC1_HEADER_INDEX_MASK), + (u8)((desc1 >> SDMA_DESC1_HEADER_DWS_SHIFT) + & SDMA_DESC1_HEADER_DWS_MASK)); + return ret; +} + +const char *print_u32_array( + struct trace_seq *p, + u32 *arr, int len) +{ + int i; + const char *ret = trace_seq_buffer_ptr(p); + + for (i = 0; i < len ; i++) + trace_seq_printf(p, "%s%#x", i == 0 ? "" : " ", arr[i]); + trace_seq_putc(p, 0); + return ret; +} + +const char *print_u64_array( + struct trace_seq *p, + u64 *arr, int len) +{ + int i; + const char *ret = trace_seq_buffer_ptr(p); + + for (i = 0; i < len; i++) + trace_seq_printf(p, "%s0x%016llx", i == 0 ? "" : " ", arr[i]); + trace_seq_putc(p, 0); + return ret; +} + +__hfi1_trace_fn(PKT); +__hfi1_trace_fn(PROC); +__hfi1_trace_fn(SDMA); +__hfi1_trace_fn(LINKVERB); +__hfi1_trace_fn(DEBUG); +__hfi1_trace_fn(SNOOP); +__hfi1_trace_fn(CNTR); +__hfi1_trace_fn(PIO); +__hfi1_trace_fn(DC8051); +__hfi1_trace_fn(FIRMWARE); +__hfi1_trace_fn(RCVCTRL); +__hfi1_trace_fn(TID); diff --git a/drivers/staging/rdma/hfi1/trace.h b/drivers/staging/rdma/hfi1/trace.h new file mode 100644 index 000000000000..d7851c0a0171 --- /dev/null +++ b/drivers/staging/rdma/hfi1/trace.h @@ -0,0 +1,1409 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#undef TRACE_SYSTEM_VAR +#define TRACE_SYSTEM_VAR hfi1 + +#if !defined(__HFI1_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __HFI1_TRACE_H + +#include <linux/tracepoint.h> +#include <linux/trace_seq.h> + +#include "hfi.h" +#include "mad.h" +#include "sdma.h" + +#define DD_DEV_ENTRY(dd) __string(dev, dev_name(&(dd)->pcidev->dev)) +#define DD_DEV_ASSIGN(dd) __assign_str(dev, dev_name(&(dd)->pcidev->dev)) + +#define packettype_name(etype) { RHF_RCV_TYPE_##etype, #etype } +#define show_packettype(etype) \ +__print_symbolic(etype, \ + packettype_name(EXPECTED), \ + packettype_name(EAGER), \ + packettype_name(IB), \ + packettype_name(ERROR), \ + packettype_name(BYPASS)) + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_rx + +TRACE_EVENT(hfi1_rcvhdr, + TP_PROTO(struct hfi1_devdata *dd, + u64 eflags, + u32 ctxt, + u32 etype, + u32 hlen, + u32 tlen, + u32 updegr, + u32 etail), + TP_ARGS(dd, ctxt, eflags, etype, hlen, tlen, updegr, etail), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u64, eflags) + __field(u32, ctxt) + __field(u32, etype) + __field(u32, hlen) + __field(u32, tlen) + __field(u32, updegr) + __field(u32, etail) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->eflags = eflags; + __entry->ctxt = ctxt; + __entry->etype = etype; + __entry->hlen = hlen; + __entry->tlen = tlen; + __entry->updegr = updegr; + __entry->etail = etail; + ), + TP_printk( +"[%s] ctxt %d eflags 0x%llx etype %d,%s hlen %d tlen %d updegr %d etail %d", + __get_str(dev), + __entry->ctxt, + __entry->eflags, + __entry->etype, show_packettype(__entry->etype), + __entry->hlen, + __entry->tlen, + __entry->updegr, + __entry->etail + ) +); + +TRACE_EVENT(hfi1_receive_interrupt, + TP_PROTO(struct hfi1_devdata *dd, u32 ctxt), + TP_ARGS(dd, ctxt), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u32, ctxt) + __field(u8, slow_path) + __field(u8, dma_rtail) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + if (dd->rcd[ctxt]->do_interrupt == + &handle_receive_interrupt) { + __entry->slow_path = 1; + __entry->dma_rtail = 0xFF; + } else if (dd->rcd[ctxt]->do_interrupt == + &handle_receive_interrupt_dma_rtail){ + __entry->dma_rtail = 1; + __entry->slow_path = 0; + } else if (dd->rcd[ctxt]->do_interrupt == + &handle_receive_interrupt_nodma_rtail) { + __entry->dma_rtail = 0; + __entry->slow_path = 0; + } + ), + TP_printk( + "[%s] ctxt %d SlowPath: %d DmaRtail: %d", + __get_str(dev), + __entry->ctxt, + __entry->slow_path, + __entry->dma_rtail + ) +); + +const char *print_u64_array(struct trace_seq *, u64 *, int); + +TRACE_EVENT(hfi1_exp_tid_map, + TP_PROTO(unsigned ctxt, u16 subctxt, int dir, + unsigned long *maps, u16 count), + TP_ARGS(ctxt, subctxt, dir, maps, count), + TP_STRUCT__entry( + __field(unsigned, ctxt) + __field(u16, subctxt) + __field(int, dir) + __field(u16, count) + __dynamic_array(unsigned long, maps, sizeof(*maps) * count) + ), + TP_fast_assign( + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->dir = dir; + __entry->count = count; + memcpy(__get_dynamic_array(maps), maps, + sizeof(*maps) * count); + ), + TP_printk("[%3u:%02u] %s tidmaps %s", + __entry->ctxt, + __entry->subctxt, + (__entry->dir ? ">" : "<"), + print_u64_array(p, __get_dynamic_array(maps), + __entry->count) + ) + ); + +TRACE_EVENT(hfi1_exp_rcv_set, + TP_PROTO(unsigned ctxt, u16 subctxt, u32 tid, + unsigned long vaddr, u64 phys_addr, void *page), + TP_ARGS(ctxt, subctxt, tid, vaddr, phys_addr, page), + TP_STRUCT__entry( + __field(unsigned, ctxt) + __field(u16, subctxt) + __field(u32, tid) + __field(unsigned long, vaddr) + __field(u64, phys_addr) + __field(void *, page) + ), + TP_fast_assign( + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->tid = tid; + __entry->vaddr = vaddr; + __entry->phys_addr = phys_addr; + __entry->page = page; + ), + TP_printk("[%u:%u] TID %u, vaddrs 0x%lx, physaddr 0x%llx, pgp %p", + __entry->ctxt, + __entry->subctxt, + __entry->tid, + __entry->vaddr, + __entry->phys_addr, + __entry->page + ) + ); + +TRACE_EVENT(hfi1_exp_rcv_free, + TP_PROTO(unsigned ctxt, u16 subctxt, u32 tid, + unsigned long phys, void *page), + TP_ARGS(ctxt, subctxt, tid, phys, page), + TP_STRUCT__entry( + __field(unsigned, ctxt) + __field(u16, subctxt) + __field(u32, tid) + __field(unsigned long, phys) + __field(void *, page) + ), + TP_fast_assign( + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->tid = tid; + __entry->phys = phys; + __entry->page = page; + ), + TP_printk("[%u:%u] freeing TID %u, 0x%lx, pgp %p", + __entry->ctxt, + __entry->subctxt, + __entry->tid, + __entry->phys, + __entry->page + ) + ); +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_tx + +TRACE_EVENT(hfi1_piofree, + TP_PROTO(struct send_context *sc, int extra), + TP_ARGS(sc, extra), + TP_STRUCT__entry( + DD_DEV_ENTRY(sc->dd) + __field(u32, sw_index) + __field(u32, hw_context) + __field(int, extra) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sc->dd); + __entry->sw_index = sc->sw_index; + __entry->hw_context = sc->hw_context; + __entry->extra = extra; + ), + TP_printk( + "[%s] ctxt %u(%u) extra %d", + __get_str(dev), + __entry->sw_index, + __entry->hw_context, + __entry->extra + ) +); + +TRACE_EVENT(hfi1_wantpiointr, + TP_PROTO(struct send_context *sc, u32 needint, u64 credit_ctrl), + TP_ARGS(sc, needint, credit_ctrl), + TP_STRUCT__entry( + DD_DEV_ENTRY(sc->dd) + __field(u32, sw_index) + __field(u32, hw_context) + __field(u32, needint) + __field(u64, credit_ctrl) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sc->dd); + __entry->sw_index = sc->sw_index; + __entry->hw_context = sc->hw_context; + __entry->needint = needint; + __entry->credit_ctrl = credit_ctrl; + ), + TP_printk( + "[%s] ctxt %u(%u) on %d credit_ctrl 0x%llx", + __get_str(dev), + __entry->sw_index, + __entry->hw_context, + __entry->needint, + (unsigned long long)__entry->credit_ctrl + ) +); + +DECLARE_EVENT_CLASS(hfi1_qpsleepwakeup_template, + TP_PROTO(struct hfi1_qp *qp, u32 flags), + TP_ARGS(qp, flags), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd_from_ibdev(qp->ibqp.device)) + __field(u32, qpn) + __field(u32, flags) + __field(u32, s_flags) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd_from_ibdev(qp->ibqp.device)) + __entry->flags = flags; + __entry->qpn = qp->ibqp.qp_num; + __entry->s_flags = qp->s_flags; + ), + TP_printk( + "[%s] qpn 0x%x flags 0x%x s_flags 0x%x", + __get_str(dev), + __entry->qpn, + __entry->flags, + __entry->s_flags + ) +); + +DEFINE_EVENT(hfi1_qpsleepwakeup_template, hfi1_qpwakeup, + TP_PROTO(struct hfi1_qp *qp, u32 flags), + TP_ARGS(qp, flags)); + +DEFINE_EVENT(hfi1_qpsleepwakeup_template, hfi1_qpsleep, + TP_PROTO(struct hfi1_qp *qp, u32 flags), + TP_ARGS(qp, flags)); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_qphash +DECLARE_EVENT_CLASS(hfi1_qphash_template, + TP_PROTO(struct hfi1_qp *qp, u32 bucket), + TP_ARGS(qp, bucket), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd_from_ibdev(qp->ibqp.device)) + __field(u32, qpn) + __field(u32, bucket) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd_from_ibdev(qp->ibqp.device)) + __entry->qpn = qp->ibqp.qp_num; + __entry->bucket = bucket; + ), + TP_printk( + "[%s] qpn 0x%x bucket %u", + __get_str(dev), + __entry->qpn, + __entry->bucket + ) +); + +DEFINE_EVENT(hfi1_qphash_template, hfi1_qpinsert, + TP_PROTO(struct hfi1_qp *qp, u32 bucket), + TP_ARGS(qp, bucket)); + +DEFINE_EVENT(hfi1_qphash_template, hfi1_qpremove, + TP_PROTO(struct hfi1_qp *qp, u32 bucket), + TP_ARGS(qp, bucket)); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_ibhdrs + +u8 ibhdr_exhdr_len(struct hfi1_ib_header *hdr); +const char *parse_everbs_hdrs( + struct trace_seq *p, + u8 opcode, + void *ehdrs); + +#define __parse_ib_ehdrs(op, ehdrs) parse_everbs_hdrs(p, op, ehdrs) + +const char *parse_sdma_flags( + struct trace_seq *p, + u64 desc0, u64 desc1); + +#define __parse_sdma_flags(desc0, desc1) parse_sdma_flags(p, desc0, desc1) + + +#define lrh_name(lrh) { HFI1_##lrh, #lrh } +#define show_lnh(lrh) \ +__print_symbolic(lrh, \ + lrh_name(LRH_BTH), \ + lrh_name(LRH_GRH)) + +#define ib_opcode_name(opcode) { IB_OPCODE_##opcode, #opcode } +#define show_ib_opcode(opcode) \ +__print_symbolic(opcode, \ + ib_opcode_name(RC_SEND_FIRST), \ + ib_opcode_name(RC_SEND_MIDDLE), \ + ib_opcode_name(RC_SEND_LAST), \ + ib_opcode_name(RC_SEND_LAST_WITH_IMMEDIATE), \ + ib_opcode_name(RC_SEND_ONLY), \ + ib_opcode_name(RC_SEND_ONLY_WITH_IMMEDIATE), \ + ib_opcode_name(RC_RDMA_WRITE_FIRST), \ + ib_opcode_name(RC_RDMA_WRITE_MIDDLE), \ + ib_opcode_name(RC_RDMA_WRITE_LAST), \ + ib_opcode_name(RC_RDMA_WRITE_LAST_WITH_IMMEDIATE), \ + ib_opcode_name(RC_RDMA_WRITE_ONLY), \ + ib_opcode_name(RC_RDMA_WRITE_ONLY_WITH_IMMEDIATE), \ + ib_opcode_name(RC_RDMA_READ_REQUEST), \ + ib_opcode_name(RC_RDMA_READ_RESPONSE_FIRST), \ + ib_opcode_name(RC_RDMA_READ_RESPONSE_MIDDLE), \ + ib_opcode_name(RC_RDMA_READ_RESPONSE_LAST), \ + ib_opcode_name(RC_RDMA_READ_RESPONSE_ONLY), \ + ib_opcode_name(RC_ACKNOWLEDGE), \ + ib_opcode_name(RC_ATOMIC_ACKNOWLEDGE), \ + ib_opcode_name(RC_COMPARE_SWAP), \ + ib_opcode_name(RC_FETCH_ADD), \ + ib_opcode_name(UC_SEND_FIRST), \ + ib_opcode_name(UC_SEND_MIDDLE), \ + ib_opcode_name(UC_SEND_LAST), \ + ib_opcode_name(UC_SEND_LAST_WITH_IMMEDIATE), \ + ib_opcode_name(UC_SEND_ONLY), \ + ib_opcode_name(UC_SEND_ONLY_WITH_IMMEDIATE), \ + ib_opcode_name(UC_RDMA_WRITE_FIRST), \ + ib_opcode_name(UC_RDMA_WRITE_MIDDLE), \ + ib_opcode_name(UC_RDMA_WRITE_LAST), \ + ib_opcode_name(UC_RDMA_WRITE_LAST_WITH_IMMEDIATE), \ + ib_opcode_name(UC_RDMA_WRITE_ONLY), \ + ib_opcode_name(UC_RDMA_WRITE_ONLY_WITH_IMMEDIATE), \ + ib_opcode_name(UD_SEND_ONLY), \ + ib_opcode_name(UD_SEND_ONLY_WITH_IMMEDIATE)) + + +#define LRH_PRN "vl %d lver %d sl %d lnh %d,%s dlid %.4x len %d slid %.4x" +#define BTH_PRN \ + "op 0x%.2x,%s se %d m %d pad %d tver %d pkey 0x%.4x " \ + "f %d b %d qpn 0x%.6x a %d psn 0x%.8x" +#define EHDR_PRN "%s" + +DECLARE_EVENT_CLASS(hfi1_ibhdr_template, + TP_PROTO(struct hfi1_devdata *dd, + struct hfi1_ib_header *hdr), + TP_ARGS(dd, hdr), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + /* LRH */ + __field(u8, vl) + __field(u8, lver) + __field(u8, sl) + __field(u8, lnh) + __field(u16, dlid) + __field(u16, len) + __field(u16, slid) + /* BTH */ + __field(u8, opcode) + __field(u8, se) + __field(u8, m) + __field(u8, pad) + __field(u8, tver) + __field(u16, pkey) + __field(u8, f) + __field(u8, b) + __field(u32, qpn) + __field(u8, a) + __field(u32, psn) + /* extended headers */ + __dynamic_array(u8, ehdrs, ibhdr_exhdr_len(hdr)) + ), + TP_fast_assign( + struct hfi1_other_headers *ohdr; + + DD_DEV_ASSIGN(dd); + /* LRH */ + __entry->vl = + (u8)(be16_to_cpu(hdr->lrh[0]) >> 12); + __entry->lver = + (u8)(be16_to_cpu(hdr->lrh[0]) >> 8) & 0xf; + __entry->sl = + (u8)(be16_to_cpu(hdr->lrh[0]) >> 4) & 0xf; + __entry->lnh = + (u8)(be16_to_cpu(hdr->lrh[0]) & 3); + __entry->dlid = + be16_to_cpu(hdr->lrh[1]); + /* allow for larger len */ + __entry->len = + be16_to_cpu(hdr->lrh[2]); + __entry->slid = + be16_to_cpu(hdr->lrh[3]); + /* BTH */ + if (__entry->lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else + ohdr = &hdr->u.l.oth; + __entry->opcode = + (be32_to_cpu(ohdr->bth[0]) >> 24) & 0xff; + __entry->se = + (be32_to_cpu(ohdr->bth[0]) >> 23) & 1; + __entry->m = + (be32_to_cpu(ohdr->bth[0]) >> 22) & 1; + __entry->pad = + (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + __entry->tver = + (be32_to_cpu(ohdr->bth[0]) >> 16) & 0xf; + __entry->pkey = + be32_to_cpu(ohdr->bth[0]) & 0xffff; + __entry->f = + (be32_to_cpu(ohdr->bth[1]) >> HFI1_FECN_SHIFT) + & HFI1_FECN_MASK; + __entry->b = + (be32_to_cpu(ohdr->bth[1]) >> HFI1_BECN_SHIFT) + & HFI1_BECN_MASK; + __entry->qpn = + be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + __entry->a = + (be32_to_cpu(ohdr->bth[2]) >> 31) & 1; + /* allow for larger PSN */ + __entry->psn = + be32_to_cpu(ohdr->bth[2]) & 0x7fffffff; + /* extended headers */ + memcpy( + __get_dynamic_array(ehdrs), + &ohdr->u, + ibhdr_exhdr_len(hdr)); + ), + TP_printk("[%s] " LRH_PRN " " BTH_PRN " " EHDR_PRN, + __get_str(dev), + /* LRH */ + __entry->vl, + __entry->lver, + __entry->sl, + __entry->lnh, show_lnh(__entry->lnh), + __entry->dlid, + __entry->len, + __entry->slid, + /* BTH */ + __entry->opcode, show_ib_opcode(__entry->opcode), + __entry->se, + __entry->m, + __entry->pad, + __entry->tver, + __entry->pkey, + __entry->f, + __entry->b, + __entry->qpn, + __entry->a, + __entry->psn, + /* extended headers */ + __parse_ib_ehdrs( + __entry->opcode, + (void *)__get_dynamic_array(ehdrs)) + ) +); + +DEFINE_EVENT(hfi1_ibhdr_template, input_ibhdr, + TP_PROTO(struct hfi1_devdata *dd, struct hfi1_ib_header *hdr), + TP_ARGS(dd, hdr)); + +DEFINE_EVENT(hfi1_ibhdr_template, output_ibhdr, + TP_PROTO(struct hfi1_devdata *dd, struct hfi1_ib_header *hdr), + TP_ARGS(dd, hdr)); + +#define SNOOP_PRN \ + "slid %.4x dlid %.4x qpn 0x%.6x opcode 0x%.2x,%s " \ + "svc lvl %d pkey 0x%.4x [header = %d bytes] [data = %d bytes]" + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_snoop + + +TRACE_EVENT(snoop_capture, + TP_PROTO(struct hfi1_devdata *dd, + int hdr_len, + struct hfi1_ib_header *hdr, + int data_len, + void *data), + TP_ARGS(dd, hdr_len, hdr, data_len, data), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u16, slid) + __field(u16, dlid) + __field(u32, qpn) + __field(u8, opcode) + __field(u8, sl) + __field(u16, pkey) + __field(u32, hdr_len) + __field(u32, data_len) + __field(u8, lnh) + __dynamic_array(u8, raw_hdr, hdr_len) + __dynamic_array(u8, raw_pkt, data_len) + ), + TP_fast_assign( + struct hfi1_other_headers *ohdr; + + __entry->lnh = (u8)(be16_to_cpu(hdr->lrh[0]) & 3); + if (__entry->lnh == HFI1_LRH_BTH) + ohdr = &hdr->u.oth; + else + ohdr = &hdr->u.l.oth; + DD_DEV_ASSIGN(dd); + __entry->slid = be16_to_cpu(hdr->lrh[3]); + __entry->dlid = be16_to_cpu(hdr->lrh[1]); + __entry->qpn = be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + __entry->opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0xff; + __entry->sl = (u8)(be16_to_cpu(hdr->lrh[0]) >> 4) & 0xf; + __entry->pkey = be32_to_cpu(ohdr->bth[0]) & 0xffff; + __entry->hdr_len = hdr_len; + __entry->data_len = data_len; + memcpy(__get_dynamic_array(raw_hdr), hdr, hdr_len); + memcpy(__get_dynamic_array(raw_pkt), data, data_len); + ), + TP_printk("[%s] " SNOOP_PRN, + __get_str(dev), + __entry->slid, + __entry->dlid, + __entry->qpn, + __entry->opcode, + show_ib_opcode(__entry->opcode), + __entry->sl, + __entry->pkey, + __entry->hdr_len, + __entry->data_len + ) +); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_ctxts + +#define UCTXT_FMT \ + "cred:%u, credaddr:0x%llx, piobase:0x%llx, rcvhdr_cnt:%u, " \ + "rcvbase:0x%llx, rcvegrc:%u, rcvegrb:0x%llx" +TRACE_EVENT(hfi1_uctxtdata, + TP_PROTO(struct hfi1_devdata *dd, struct hfi1_ctxtdata *uctxt), + TP_ARGS(dd, uctxt), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(unsigned, ctxt) + __field(u32, credits) + __field(u64, hw_free) + __field(u64, piobase) + __field(u16, rcvhdrq_cnt) + __field(u64, rcvhdrq_phys) + __field(u32, eager_cnt) + __field(u64, rcvegr_phys) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = uctxt->ctxt; + __entry->credits = uctxt->sc->credits; + __entry->hw_free = (u64)uctxt->sc->hw_free; + __entry->piobase = (u64)uctxt->sc->base_addr; + __entry->rcvhdrq_cnt = uctxt->rcvhdrq_cnt; + __entry->rcvhdrq_phys = uctxt->rcvhdrq_phys; + __entry->eager_cnt = uctxt->egrbufs.alloced; + __entry->rcvegr_phys = uctxt->egrbufs.rcvtids[0].phys; + ), + TP_printk( + "[%s] ctxt %u " UCTXT_FMT, + __get_str(dev), + __entry->ctxt, + __entry->credits, + __entry->hw_free, + __entry->piobase, + __entry->rcvhdrq_cnt, + __entry->rcvhdrq_phys, + __entry->eager_cnt, + __entry->rcvegr_phys + ) + ); + +#define CINFO_FMT \ + "egrtids:%u, egr_size:%u, hdrq_cnt:%u, hdrq_size:%u, sdma_ring_size:%u" +TRACE_EVENT(hfi1_ctxt_info, + TP_PROTO(struct hfi1_devdata *dd, unsigned ctxt, unsigned subctxt, + struct hfi1_ctxt_info cinfo), + TP_ARGS(dd, ctxt, subctxt, cinfo), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(unsigned, ctxt) + __field(unsigned, subctxt) + __field(u16, egrtids) + __field(u16, rcvhdrq_cnt) + __field(u16, rcvhdrq_size) + __field(u16, sdma_ring_size) + __field(u32, rcvegr_size) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->egrtids = cinfo.egrtids; + __entry->rcvhdrq_cnt = cinfo.rcvhdrq_cnt; + __entry->rcvhdrq_size = cinfo.rcvhdrq_entsize; + __entry->sdma_ring_size = cinfo.sdma_ring_size; + __entry->rcvegr_size = cinfo.rcvegr_size; + ), + TP_printk( + "[%s] ctxt %u:%u " CINFO_FMT, + __get_str(dev), + __entry->ctxt, + __entry->subctxt, + __entry->egrtids, + __entry->rcvegr_size, + __entry->rcvhdrq_cnt, + __entry->rcvhdrq_size, + __entry->sdma_ring_size + ) + ); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_sma + +#define BCT_FORMAT \ + "shared_limit %x vls 0-7 [%x,%x][%x,%x][%x,%x][%x,%x][%x,%x][%x,%x][%x,%x][%x,%x] 15 [%x,%x]" + +#define BCT(field) \ + be16_to_cpu( \ + ((struct buffer_control *)__get_dynamic_array(bct))->field \ + ) + +DECLARE_EVENT_CLASS(hfi1_bct_template, + TP_PROTO(struct hfi1_devdata *dd, struct buffer_control *bc), + TP_ARGS(dd, bc), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __dynamic_array(u8, bct, sizeof(*bc)) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + memcpy( + __get_dynamic_array(bct), + bc, + sizeof(*bc)); + ), + TP_printk(BCT_FORMAT, + BCT(overall_shared_limit), + + BCT(vl[0].dedicated), + BCT(vl[0].shared), + + BCT(vl[1].dedicated), + BCT(vl[1].shared), + + BCT(vl[2].dedicated), + BCT(vl[2].shared), + + BCT(vl[3].dedicated), + BCT(vl[3].shared), + + BCT(vl[4].dedicated), + BCT(vl[4].shared), + + BCT(vl[5].dedicated), + BCT(vl[5].shared), + + BCT(vl[6].dedicated), + BCT(vl[6].shared), + + BCT(vl[7].dedicated), + BCT(vl[7].shared), + + BCT(vl[15].dedicated), + BCT(vl[15].shared) + ) +); + + +DEFINE_EVENT(hfi1_bct_template, bct_set, + TP_PROTO(struct hfi1_devdata *dd, struct buffer_control *bc), + TP_ARGS(dd, bc)); + +DEFINE_EVENT(hfi1_bct_template, bct_get, + TP_PROTO(struct hfi1_devdata *dd, struct buffer_control *bc), + TP_ARGS(dd, bc)); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_sdma + +TRACE_EVENT(hfi1_sdma_descriptor, + TP_PROTO( + struct sdma_engine *sde, + u64 desc0, + u64 desc1, + u16 e, + void *descp), + TP_ARGS(sde, desc0, desc1, e, descp), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(void *, descp) + __field(u64, desc0) + __field(u64, desc1) + __field(u16, e) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->desc0 = desc0; + __entry->desc1 = desc1; + __entry->idx = sde->this_idx; + __entry->descp = descp; + __entry->e = e; + ), + TP_printk( + "[%s] SDE(%u) flags:%s addr:0x%016llx gen:%u len:%u d0:%016llx d1:%016llx to %p,%u", + __get_str(dev), + __entry->idx, + __parse_sdma_flags(__entry->desc0, __entry->desc1), + (__entry->desc0 >> SDMA_DESC0_PHY_ADDR_SHIFT) + & SDMA_DESC0_PHY_ADDR_MASK, + (u8)((__entry->desc1 >> SDMA_DESC1_GENERATION_SHIFT) + & SDMA_DESC1_GENERATION_MASK), + (u16)((__entry->desc0 >> SDMA_DESC0_BYTE_COUNT_SHIFT) + & SDMA_DESC0_BYTE_COUNT_MASK), + __entry->desc0, + __entry->desc1, + __entry->descp, + __entry->e + ) +); + +TRACE_EVENT(hfi1_sdma_engine_select, + TP_PROTO(struct hfi1_devdata *dd, u32 sel, u8 vl, u8 idx), + TP_ARGS(dd, sel, vl, idx), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u32, sel) + __field(u8, vl) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->sel = sel; + __entry->vl = vl; + __entry->idx = idx; + ), + TP_printk( + "[%s] selecting SDE %u sel 0x%x vl %u", + __get_str(dev), + __entry->idx, + __entry->sel, + __entry->vl + ) +); + +DECLARE_EVENT_CLASS(hfi1_sdma_engine_class, + TP_PROTO( + struct sdma_engine *sde, + u64 status + ), + TP_ARGS(sde, status), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(u64, status) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->status = status; + __entry->idx = sde->this_idx; + ), + TP_printk( + "[%s] SDE(%u) status %llx", + __get_str(dev), + __entry->idx, + (unsigned long long)__entry->status + ) +); + +DEFINE_EVENT(hfi1_sdma_engine_class, hfi1_sdma_engine_interrupt, + TP_PROTO( + struct sdma_engine *sde, + u64 status + ), + TP_ARGS(sde, status) +); + +DEFINE_EVENT(hfi1_sdma_engine_class, hfi1_sdma_engine_progress, + TP_PROTO( + struct sdma_engine *sde, + u64 status + ), + TP_ARGS(sde, status) +); + +DECLARE_EVENT_CLASS(hfi1_sdma_ahg_ad, + TP_PROTO( + struct sdma_engine *sde, + int aidx + ), + TP_ARGS(sde, aidx), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(int, aidx) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->idx = sde->this_idx; + __entry->aidx = aidx; + ), + TP_printk( + "[%s] SDE(%u) aidx %d", + __get_str(dev), + __entry->idx, + __entry->aidx + ) +); + +DEFINE_EVENT(hfi1_sdma_ahg_ad, hfi1_ahg_allocate, + TP_PROTO( + struct sdma_engine *sde, + int aidx + ), + TP_ARGS(sde, aidx)); + +DEFINE_EVENT(hfi1_sdma_ahg_ad, hfi1_ahg_deallocate, + TP_PROTO( + struct sdma_engine *sde, + int aidx + ), + TP_ARGS(sde, aidx)); + +#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER +TRACE_EVENT(hfi1_sdma_progress, + TP_PROTO( + struct sdma_engine *sde, + u16 hwhead, + u16 swhead, + struct sdma_txreq *txp + ), + TP_ARGS(sde, hwhead, swhead, txp), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(u64, sn) + __field(u16, hwhead) + __field(u16, swhead) + __field(u16, txnext) + __field(u16, tx_tail) + __field(u16, tx_head) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->hwhead = hwhead; + __entry->swhead = swhead; + __entry->tx_tail = sde->tx_tail; + __entry->tx_head = sde->tx_head; + __entry->txnext = txp ? txp->next_descq_idx : ~0; + __entry->idx = sde->this_idx; + __entry->sn = txp ? txp->sn : ~0; + ), + TP_printk( + "[%s] SDE(%u) sn %llu hwhead %u swhead %u next_descq_idx %u tx_head %u tx_tail %u", + __get_str(dev), + __entry->idx, + __entry->sn, + __entry->hwhead, + __entry->swhead, + __entry->txnext, + __entry->tx_head, + __entry->tx_tail + ) +); +#else +TRACE_EVENT(hfi1_sdma_progress, + TP_PROTO( + struct sdma_engine *sde, + u16 hwhead, + u16 swhead, + struct sdma_txreq *txp + ), + TP_ARGS(sde, hwhead, swhead, txp), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(u16, hwhead) + __field(u16, swhead) + __field(u16, txnext) + __field(u16, tx_tail) + __field(u16, tx_head) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->hwhead = hwhead; + __entry->swhead = swhead; + __entry->tx_tail = sde->tx_tail; + __entry->tx_head = sde->tx_head; + __entry->txnext = txp ? txp->next_descq_idx : ~0; + __entry->idx = sde->this_idx; + ), + TP_printk( + "[%s] SDE(%u) hwhead %u swhead %u next_descq_idx %u tx_head %u tx_tail %u", + __get_str(dev), + __entry->idx, + __entry->hwhead, + __entry->swhead, + __entry->txnext, + __entry->tx_head, + __entry->tx_tail + ) +); +#endif + +DECLARE_EVENT_CLASS(hfi1_sdma_sn, + TP_PROTO( + struct sdma_engine *sde, + u64 sn + ), + TP_ARGS(sde, sn), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __field(u64, sn) + __field(u8, idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __entry->sn = sn; + __entry->idx = sde->this_idx; + ), + TP_printk( + "[%s] SDE(%u) sn %llu", + __get_str(dev), + __entry->idx, + __entry->sn + ) +); + +DEFINE_EVENT(hfi1_sdma_sn, hfi1_sdma_out_sn, + TP_PROTO( + struct sdma_engine *sde, + u64 sn + ), + TP_ARGS(sde, sn) +); + +DEFINE_EVENT(hfi1_sdma_sn, hfi1_sdma_in_sn, + TP_PROTO( + struct sdma_engine *sde, + u64 sn + ), + TP_ARGS(sde, sn) +); + +#define USDMA_HDR_FORMAT \ + "[%s:%u:%u:%u] PBC=(0x%x 0x%x) LRH=(0x%x 0x%x) BTH=(0x%x 0x%x 0x%x) KDETH=(0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x) TIDVal=0x%x" + +TRACE_EVENT(hfi1_sdma_user_header, + TP_PROTO(struct hfi1_devdata *dd, u16 ctxt, u8 subctxt, u16 req, + struct hfi1_pkt_header *hdr, u32 tidval), + TP_ARGS(dd, ctxt, subctxt, req, hdr, tidval), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u16, ctxt) + __field(u8, subctxt) + __field(u16, req) + __field(__le32, pbc0) + __field(__le32, pbc1) + __field(__be32, lrh0) + __field(__be32, lrh1) + __field(__be32, bth0) + __field(__be32, bth1) + __field(__be32, bth2) + __field(__le32, kdeth0) + __field(__le32, kdeth1) + __field(__le32, kdeth2) + __field(__le32, kdeth3) + __field(__le32, kdeth4) + __field(__le32, kdeth5) + __field(__le32, kdeth6) + __field(__le32, kdeth7) + __field(__le32, kdeth8) + __field(u32, tidval) + ), + TP_fast_assign( + __le32 *pbc = (__le32 *)hdr->pbc; + __be32 *lrh = (__be32 *)hdr->lrh; + __be32 *bth = (__be32 *)hdr->bth; + __le32 *kdeth = (__le32 *)&hdr->kdeth; + + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->req = req; + __entry->pbc0 = pbc[0]; + __entry->pbc1 = pbc[1]; + __entry->lrh0 = be32_to_cpu(lrh[0]); + __entry->lrh1 = be32_to_cpu(lrh[1]); + __entry->bth0 = be32_to_cpu(bth[0]); + __entry->bth1 = be32_to_cpu(bth[1]); + __entry->bth2 = be32_to_cpu(bth[2]); + __entry->kdeth0 = kdeth[0]; + __entry->kdeth1 = kdeth[1]; + __entry->kdeth2 = kdeth[2]; + __entry->kdeth3 = kdeth[3]; + __entry->kdeth4 = kdeth[4]; + __entry->kdeth5 = kdeth[5]; + __entry->kdeth6 = kdeth[6]; + __entry->kdeth7 = kdeth[7]; + __entry->kdeth8 = kdeth[8]; + __entry->tidval = tidval; + ), + TP_printk(USDMA_HDR_FORMAT, + __get_str(dev), + __entry->ctxt, + __entry->subctxt, + __entry->req, + __entry->pbc1, + __entry->pbc0, + __entry->lrh0, + __entry->lrh1, + __entry->bth0, + __entry->bth1, + __entry->bth2, + __entry->kdeth0, + __entry->kdeth1, + __entry->kdeth2, + __entry->kdeth3, + __entry->kdeth4, + __entry->kdeth5, + __entry->kdeth6, + __entry->kdeth7, + __entry->kdeth8, + __entry->tidval + ) + ); + +#define SDMA_UREQ_FMT \ + "[%s:%u:%u] ver/op=0x%x, iovcnt=%u, npkts=%u, frag=%u, idx=%u" +TRACE_EVENT(hfi1_sdma_user_reqinfo, + TP_PROTO(struct hfi1_devdata *dd, u16 ctxt, u8 subctxt, u16 *i), + TP_ARGS(dd, ctxt, subctxt, i), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd); + __field(u16, ctxt) + __field(u8, subctxt) + __field(u8, ver_opcode) + __field(u8, iovcnt) + __field(u16, npkts) + __field(u16, fragsize) + __field(u16, comp_idx) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->ver_opcode = i[0] & 0xff; + __entry->iovcnt = (i[0] >> 8) & 0xff; + __entry->npkts = i[1]; + __entry->fragsize = i[2]; + __entry->comp_idx = i[3]; + ), + TP_printk(SDMA_UREQ_FMT, + __get_str(dev), + __entry->ctxt, + __entry->subctxt, + __entry->ver_opcode, + __entry->iovcnt, + __entry->npkts, + __entry->fragsize, + __entry->comp_idx + ) + ); + +#define usdma_complete_name(st) { st, #st } +#define show_usdma_complete_state(st) \ + __print_symbolic(st, \ + usdma_complete_name(FREE), \ + usdma_complete_name(QUEUED), \ + usdma_complete_name(COMPLETE), \ + usdma_complete_name(ERROR)) + +TRACE_EVENT(hfi1_sdma_user_completion, + TP_PROTO(struct hfi1_devdata *dd, u16 ctxt, u8 subctxt, u16 idx, + u8 state, int code), + TP_ARGS(dd, ctxt, subctxt, idx, state, code), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u16, ctxt) + __field(u8, subctxt) + __field(u16, idx) + __field(u8, state) + __field(int, code) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->idx = idx; + __entry->state = state; + __entry->code = code; + ), + TP_printk("[%s:%u:%u:%u] SDMA completion state %s (%d)", + __get_str(dev), __entry->ctxt, __entry->subctxt, + __entry->idx, show_usdma_complete_state(__entry->state), + __entry->code) + ); + +const char *print_u32_array(struct trace_seq *, u32 *, int); +#define __print_u32_hex(arr, len) print_u32_array(p, arr, len) + +TRACE_EVENT(hfi1_sdma_user_header_ahg, + TP_PROTO(struct hfi1_devdata *dd, u16 ctxt, u8 subctxt, u16 req, + u8 sde, u8 ahgidx, u32 *ahg, int len, u32 tidval), + TP_ARGS(dd, ctxt, subctxt, req, sde, ahgidx, ahg, len, tidval), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __field(u16, ctxt) + __field(u8, subctxt) + __field(u16, req) + __field(u8, sde) + __field(u8, idx) + __field(int, len) + __field(u32, tidval) + __array(u32, ahg, 10) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd); + __entry->ctxt = ctxt; + __entry->subctxt = subctxt; + __entry->req = req; + __entry->sde = sde; + __entry->idx = ahgidx; + __entry->len = len; + __entry->tidval = tidval; + memcpy(__entry->ahg, ahg, len * sizeof(u32)); + ), + TP_printk("[%s:%u:%u:%u] (SDE%u/AHG%u) ahg[0-%d]=(%s) TIDVal=0x%x", + __get_str(dev), + __entry->ctxt, + __entry->subctxt, + __entry->req, + __entry->sde, + __entry->idx, + __entry->len - 1, + __print_u32_hex(__entry->ahg, __entry->len), + __entry->tidval + ) + ); + +TRACE_EVENT(hfi1_sdma_state, + TP_PROTO( + struct sdma_engine *sde, + const char *cstate, + const char *nstate + ), + TP_ARGS(sde, cstate, nstate), + TP_STRUCT__entry( + DD_DEV_ENTRY(sde->dd) + __string(curstate, cstate) + __string(newstate, nstate) + ), + TP_fast_assign( + DD_DEV_ASSIGN(sde->dd); + __assign_str(curstate, cstate); + __assign_str(newstate, nstate); + ), + TP_printk("[%s] current state %s new state %s", + __get_str(dev), + __get_str(curstate), + __get_str(newstate) + ) +); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_rc + +DECLARE_EVENT_CLASS(hfi1_sdma_rc, + TP_PROTO(struct hfi1_qp *qp, u32 psn), + TP_ARGS(qp, psn), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd_from_ibdev(qp->ibqp.device)) + __field(u32, qpn) + __field(u32, flags) + __field(u32, psn) + __field(u32, sending_psn) + __field(u32, sending_hpsn) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd_from_ibdev(qp->ibqp.device)) + __entry->qpn = qp->ibqp.qp_num; + __entry->flags = qp->s_flags; + __entry->psn = psn; + __entry->sending_psn = qp->s_sending_psn; + __entry->sending_hpsn = qp->s_sending_hpsn; + ), + TP_printk( + "[%s] qpn 0x%x flags 0x%x psn 0x%x sending_psn 0x%x sending_hpsn 0x%x", + __get_str(dev), + __entry->qpn, + __entry->flags, + __entry->psn, + __entry->sending_psn, + __entry->sending_psn + ) +); + +DEFINE_EVENT(hfi1_sdma_rc, hfi1_rc_sendcomplete, + TP_PROTO(struct hfi1_qp *qp, u32 psn), + TP_ARGS(qp, psn) +); + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_misc + +TRACE_EVENT(hfi1_interrupt, + TP_PROTO(struct hfi1_devdata *dd, const struct is_table *is_entry, + int src), + TP_ARGS(dd, is_entry, src), + TP_STRUCT__entry( + DD_DEV_ENTRY(dd) + __array(char, buf, 64) + __field(int, src) + ), + TP_fast_assign( + DD_DEV_ASSIGN(dd) + is_entry->is_name(__entry->buf, 64, src - is_entry->start); + __entry->src = src; + ), + TP_printk("[%s] source: %s [%d]", __get_str(dev), __entry->buf, + __entry->src) +); + +/* + * Note: + * This produces a REALLY ugly trace in the console output when the string is + * too long. + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM hfi1_trace + +#define MAX_MSG_LEN 512 + +DECLARE_EVENT_CLASS(hfi1_trace_template, + TP_PROTO(const char *function, struct va_format *vaf), + TP_ARGS(function, vaf), + TP_STRUCT__entry( + __string(function, function) + __dynamic_array(char, msg, MAX_MSG_LEN) + ), + TP_fast_assign( + __assign_str(function, function); + WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg), + MAX_MSG_LEN, vaf->fmt, + *vaf->va) >= MAX_MSG_LEN); + ), + TP_printk("(%s) %s", + __get_str(function), + __get_str(msg)) +); + +/* + * It may be nice to macroize the __hfi1_trace but the va_* stuff requires an + * actual function to work and can not be in a macro. + */ +#define __hfi1_trace_def(lvl) \ +void __hfi1_trace_##lvl(const char *funct, char *fmt, ...); \ + \ +DEFINE_EVENT(hfi1_trace_template, hfi1_ ##lvl, \ + TP_PROTO(const char *function, struct va_format *vaf), \ + TP_ARGS(function, vaf)) + +#define __hfi1_trace_fn(lvl) \ +void __hfi1_trace_##lvl(const char *func, char *fmt, ...) \ +{ \ + struct va_format vaf = { \ + .fmt = fmt, \ + }; \ + va_list args; \ + \ + va_start(args, fmt); \ + vaf.va = &args; \ + trace_hfi1_ ##lvl(func, &vaf); \ + va_end(args); \ + return; \ +} + +/* + * To create a new trace level simply define it below and as a __hfi1_trace_fn + * in trace.c. This will create all the hooks for calling + * hfi1_cdbg(LVL, fmt, ...); as well as take care of all + * the debugfs stuff. + */ +__hfi1_trace_def(PKT); +__hfi1_trace_def(PROC); +__hfi1_trace_def(SDMA); +__hfi1_trace_def(LINKVERB); +__hfi1_trace_def(DEBUG); +__hfi1_trace_def(SNOOP); +__hfi1_trace_def(CNTR); +__hfi1_trace_def(PIO); +__hfi1_trace_def(DC8051); +__hfi1_trace_def(FIRMWARE); +__hfi1_trace_def(RCVCTRL); +__hfi1_trace_def(TID); + +#define hfi1_cdbg(which, fmt, ...) \ + __hfi1_trace_##which(__func__, fmt, ##__VA_ARGS__) + +#define hfi1_dbg(fmt, ...) \ + hfi1_cdbg(DEBUG, fmt, ##__VA_ARGS__) + +/* + * Define HFI1_EARLY_DBG at compile time or here to enable early trace + * messages. Do not check in an enablement for this. + */ + +#ifdef HFI1_EARLY_DBG +#define hfi1_dbg_early(fmt, ...) \ + trace_printk(fmt, ##__VA_ARGS__) +#else +#define hfi1_dbg_early(fmt, ...) +#endif + +#endif /* __HFI1_TRACE_H */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace +#include <trace/define_trace.h> diff --git a/drivers/staging/rdma/hfi1/twsi.c b/drivers/staging/rdma/hfi1/twsi.c new file mode 100644 index 000000000000..ea54fd2700ad --- /dev/null +++ b/drivers/staging/rdma/hfi1/twsi.c @@ -0,0 +1,518 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/vmalloc.h> + +#include "hfi.h" +#include "twsi.h" + +/* + * "Two Wire Serial Interface" support. + * + * Originally written for a not-quite-i2c serial eeprom, which is + * still used on some supported boards. Later boards have added a + * variety of other uses, most board-specific, so the bit-boffing + * part has been split off to this file, while the other parts + * have been moved to chip-specific files. + * + * We have also dropped all pretense of fully generic (e.g. pretend + * we don't know whether '1' is the higher voltage) interface, as + * the restrictions of the generic i2c interface (e.g. no access from + * driver itself) make it unsuitable for this use. + */ + +#define READ_CMD 1 +#define WRITE_CMD 0 + +/** + * i2c_wait_for_writes - wait for a write + * @dd: the hfi1_ib device + * + * We use this instead of udelay directly, so we can make sure + * that previous register writes have been flushed all the way + * to the chip. Since we are delaying anyway, the cost doesn't + * hurt, and makes the bit twiddling more regular + */ +static void i2c_wait_for_writes(struct hfi1_devdata *dd, u32 target) +{ + /* + * implicit read of EXTStatus is as good as explicit + * read of scratch, if all we want to do is flush + * writes. + */ + hfi1_gpio_mod(dd, target, 0, 0, 0); + rmb(); /* inlined, so prevent compiler reordering */ +} + +/* + * QSFP modules are allowed to hold SCL low for 500uSec. Allow twice that + * for "almost compliant" modules + */ +#define SCL_WAIT_USEC 1000 + +/* BUF_WAIT is time bus must be free between STOP or ACK and to next START. + * Should be 20, but some chips need more. + */ +#define TWSI_BUF_WAIT_USEC 60 + +static void scl_out(struct hfi1_devdata *dd, u32 target, u8 bit) +{ + u32 mask; + + udelay(1); + + mask = QSFP_HFI0_I2CCLK; + + /* SCL is meant to be bare-drain, so never set "OUT", just DIR */ + hfi1_gpio_mod(dd, target, 0, bit ? 0 : mask, mask); + + /* + * Allow for slow slaves by simple + * delay for falling edge, sampling on rise. + */ + if (!bit) + udelay(2); + else { + int rise_usec; + + for (rise_usec = SCL_WAIT_USEC; rise_usec > 0; rise_usec -= 2) { + if (mask & hfi1_gpio_mod(dd, target, 0, 0, 0)) + break; + udelay(2); + } + if (rise_usec <= 0) + dd_dev_err(dd, "SCL interface stuck low > %d uSec\n", + SCL_WAIT_USEC); + } + i2c_wait_for_writes(dd, target); +} + +static void sda_out(struct hfi1_devdata *dd, u32 target, u8 bit) +{ + u32 mask; + + mask = QSFP_HFI0_I2CDAT; + + /* SDA is meant to be bare-drain, so never set "OUT", just DIR */ + hfi1_gpio_mod(dd, target, 0, bit ? 0 : mask, mask); + + i2c_wait_for_writes(dd, target); + udelay(2); +} + +static u8 sda_in(struct hfi1_devdata *dd, u32 target, int wait) +{ + u32 read_val, mask; + + mask = QSFP_HFI0_I2CDAT; + /* SDA is meant to be bare-drain, so never set "OUT", just DIR */ + hfi1_gpio_mod(dd, target, 0, 0, mask); + read_val = hfi1_gpio_mod(dd, target, 0, 0, 0); + if (wait) + i2c_wait_for_writes(dd, target); + return (read_val & mask) >> GPIO_SDA_NUM; +} + +/** + * i2c_ackrcv - see if ack following write is true + * @dd: the hfi1_ib device + */ +static int i2c_ackrcv(struct hfi1_devdata *dd, u32 target) +{ + u8 ack_received; + + /* AT ENTRY SCL = LOW */ + /* change direction, ignore data */ + ack_received = sda_in(dd, target, 1); + scl_out(dd, target, 1); + ack_received = sda_in(dd, target, 1) == 0; + scl_out(dd, target, 0); + return ack_received; +} + +static void stop_cmd(struct hfi1_devdata *dd, u32 target); + +/** + * rd_byte - read a byte, sending STOP on last, else ACK + * @dd: the hfi1_ib device + * + * Returns byte shifted out of device + */ +static int rd_byte(struct hfi1_devdata *dd, u32 target, int last) +{ + int bit_cntr, data; + + data = 0; + + for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) { + data <<= 1; + scl_out(dd, target, 1); + data |= sda_in(dd, target, 0); + scl_out(dd, target, 0); + } + if (last) { + scl_out(dd, target, 1); + stop_cmd(dd, target); + } else { + sda_out(dd, target, 0); + scl_out(dd, target, 1); + scl_out(dd, target, 0); + sda_out(dd, target, 1); + } + return data; +} + +/** + * wr_byte - write a byte, one bit at a time + * @dd: the hfi1_ib device + * @data: the byte to write + * + * Returns 0 if we got the following ack, otherwise 1 + */ +static int wr_byte(struct hfi1_devdata *dd, u32 target, u8 data) +{ + int bit_cntr; + u8 bit; + + for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) { + bit = (data >> bit_cntr) & 1; + sda_out(dd, target, bit); + scl_out(dd, target, 1); + scl_out(dd, target, 0); + } + return (!i2c_ackrcv(dd, target)) ? 1 : 0; +} + +/* + * issue TWSI start sequence: + * (both clock/data high, clock high, data low while clock is high) + */ +static void start_seq(struct hfi1_devdata *dd, u32 target) +{ + sda_out(dd, target, 1); + scl_out(dd, target, 1); + sda_out(dd, target, 0); + udelay(1); + scl_out(dd, target, 0); +} + +/** + * stop_seq - transmit the stop sequence + * @dd: the hfi1_ib device + * + * (both clock/data low, clock high, data high while clock is high) + */ +static void stop_seq(struct hfi1_devdata *dd, u32 target) +{ + scl_out(dd, target, 0); + sda_out(dd, target, 0); + scl_out(dd, target, 1); + sda_out(dd, target, 1); +} + +/** + * stop_cmd - transmit the stop condition + * @dd: the hfi1_ib device + * + * (both clock/data low, clock high, data high while clock is high) + */ +static void stop_cmd(struct hfi1_devdata *dd, u32 target) +{ + stop_seq(dd, target); + udelay(TWSI_BUF_WAIT_USEC); +} + +/** + * hfi1_twsi_reset - reset I2C communication + * @dd: the hfi1_ib device + */ + +int hfi1_twsi_reset(struct hfi1_devdata *dd, u32 target) +{ + int clock_cycles_left = 9; + int was_high = 0; + u32 pins, mask; + + /* Both SCL and SDA should be high. If not, there + * is something wrong. + */ + mask = QSFP_HFI0_I2CCLK | QSFP_HFI0_I2CDAT; + + /* + * Force pins to desired innocuous state. + * This is the default power-on state with out=0 and dir=0, + * So tri-stated and should be floating high (barring HW problems) + */ + hfi1_gpio_mod(dd, target, 0, 0, mask); + + /* + * Clock nine times to get all listeners into a sane state. + * If SDA does not go high at any point, we are wedged. + * One vendor recommends then issuing START followed by STOP. + * we cannot use our "normal" functions to do that, because + * if SCL drops between them, another vendor's part will + * wedge, dropping SDA and keeping it low forever, at the end of + * the next transaction (even if it was not the device addressed). + * So our START and STOP take place with SCL held high. + */ + while (clock_cycles_left--) { + scl_out(dd, target, 0); + scl_out(dd, target, 1); + /* Note if SDA is high, but keep clocking to sync slave */ + was_high |= sda_in(dd, target, 0); + } + + if (was_high) { + /* + * We saw a high, which we hope means the slave is sync'd. + * Issue START, STOP, pause for T_BUF. + */ + + pins = hfi1_gpio_mod(dd, target, 0, 0, 0); + if ((pins & mask) != mask) + dd_dev_err(dd, "GPIO pins not at rest: %d\n", + pins & mask); + /* Drop SDA to issue START */ + udelay(1); /* Guarantee .6 uSec setup */ + sda_out(dd, target, 0); + udelay(1); /* Guarantee .6 uSec hold */ + /* At this point, SCL is high, SDA low. Raise SDA for STOP */ + sda_out(dd, target, 1); + udelay(TWSI_BUF_WAIT_USEC); + } + + return !was_high; +} + +#define HFI1_TWSI_START 0x100 +#define HFI1_TWSI_STOP 0x200 + +/* Write byte to TWSI, optionally prefixed with START or suffixed with + * STOP. + * returns 0 if OK (ACK received), else != 0 + */ +static int twsi_wr(struct hfi1_devdata *dd, u32 target, int data, int flags) +{ + int ret = 1; + + if (flags & HFI1_TWSI_START) + start_seq(dd, target); + + /* Leaves SCL low (from i2c_ackrcv()) */ + ret = wr_byte(dd, target, data); + + if (flags & HFI1_TWSI_STOP) + stop_cmd(dd, target); + return ret; +} + +/* Added functionality for IBA7220-based cards */ +#define HFI1_TEMP_DEV 0x98 + +/* + * hfi1_twsi_blk_rd + * General interface for data transfer from twsi devices. + * One vestige of its former role is that it recognizes a device + * HFI1_TWSI_NO_DEV and does the correct operation for the legacy part, + * which responded to all TWSI device codes, interpreting them as + * address within device. On all other devices found on board handled by + * this driver, the device is followed by a one-byte "address" which selects + * the "register" or "offset" within the device from which data should + * be read. + */ +int hfi1_twsi_blk_rd(struct hfi1_devdata *dd, u32 target, int dev, int addr, + void *buffer, int len) +{ + int ret; + u8 *bp = buffer; + + ret = 1; + + if (dev == HFI1_TWSI_NO_DEV) { + /* legacy not-really-I2C */ + addr = (addr << 1) | READ_CMD; + ret = twsi_wr(dd, target, addr, HFI1_TWSI_START); + } else { + /* Actual I2C */ + ret = twsi_wr(dd, target, dev | WRITE_CMD, HFI1_TWSI_START); + if (ret) { + stop_cmd(dd, target); + ret = 1; + goto bail; + } + /* + * SFF spec claims we do _not_ stop after the addr + * but simply issue a start with the "read" dev-addr. + * Since we are implicitly waiting for ACK here, + * we need t_buf (nominally 20uSec) before that start, + * and cannot rely on the delay built in to the STOP + */ + ret = twsi_wr(dd, target, addr, 0); + udelay(TWSI_BUF_WAIT_USEC); + + if (ret) { + dd_dev_err(dd, + "Failed to write interface read addr %02X\n", + addr); + ret = 1; + goto bail; + } + ret = twsi_wr(dd, target, dev | READ_CMD, HFI1_TWSI_START); + } + if (ret) { + stop_cmd(dd, target); + ret = 1; + goto bail; + } + + /* + * block devices keeps clocking data out as long as we ack, + * automatically incrementing the address. Some have "pages" + * whose boundaries will not be crossed, but the handling + * of these is left to the caller, who is in a better + * position to know. + */ + while (len-- > 0) { + /* + * Get and store data, sending ACK if length remaining, + * else STOP + */ + *bp++ = rd_byte(dd, target, !len); + } + + ret = 0; + +bail: + return ret; +} + +/* + * hfi1_twsi_blk_wr + * General interface for data transfer to twsi devices. + * One vestige of its former role is that it recognizes a device + * HFI1_TWSI_NO_DEV and does the correct operation for the legacy part, + * which responded to all TWSI device codes, interpreting them as + * address within device. On all other devices found on board handled by + * this driver, the device is followed by a one-byte "address" which selects + * the "register" or "offset" within the device to which data should + * be written. + */ +int hfi1_twsi_blk_wr(struct hfi1_devdata *dd, u32 target, int dev, int addr, + const void *buffer, int len) +{ + int sub_len; + const u8 *bp = buffer; + int max_wait_time, i; + int ret = 1; + + while (len > 0) { + if (dev == HFI1_TWSI_NO_DEV) { + if (twsi_wr(dd, target, (addr << 1) | WRITE_CMD, + HFI1_TWSI_START)) { + goto failed_write; + } + } else { + /* Real I2C */ + if (twsi_wr(dd, target, + dev | WRITE_CMD, HFI1_TWSI_START)) + goto failed_write; + ret = twsi_wr(dd, target, addr, 0); + if (ret) { + dd_dev_err(dd, + "Failed to write interface write addr %02X\n", + addr); + goto failed_write; + } + } + + sub_len = min(len, 4); + addr += sub_len; + len -= sub_len; + + for (i = 0; i < sub_len; i++) + if (twsi_wr(dd, target, *bp++, 0)) + goto failed_write; + + stop_cmd(dd, target); + + /* + * Wait for write complete by waiting for a successful + * read (the chip replies with a zero after the write + * cmd completes, and before it writes to the eeprom. + * The startcmd for the read will fail the ack until + * the writes have completed. We do this inline to avoid + * the debug prints that are in the real read routine + * if the startcmd fails. + * We also use the proper device address, so it doesn't matter + * whether we have real eeprom_dev. Legacy likes any address. + */ + max_wait_time = 100; + while (twsi_wr(dd, target, + dev | READ_CMD, HFI1_TWSI_START)) { + stop_cmd(dd, target); + if (!--max_wait_time) + goto failed_write; + } + /* now read (and ignore) the resulting byte */ + rd_byte(dd, target, 1); + } + + ret = 0; + goto bail; + +failed_write: + stop_cmd(dd, target); + ret = 1; + +bail: + return ret; +} diff --git a/drivers/staging/rdma/hfi1/twsi.h b/drivers/staging/rdma/hfi1/twsi.h new file mode 100644 index 000000000000..5907e029613d --- /dev/null +++ b/drivers/staging/rdma/hfi1/twsi.h @@ -0,0 +1,68 @@ +#ifndef _TWSI_H +#define _TWSI_H +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#define HFI1_TWSI_NO_DEV 0xFF + +struct hfi1_devdata; + +/* Bit position of SDA pin in ASIC_QSFP* registers */ +#define GPIO_SDA_NUM 1 + +/* these functions must be called with qsfp_lock held */ +int hfi1_twsi_reset(struct hfi1_devdata *dd, u32 target); +int hfi1_twsi_blk_rd(struct hfi1_devdata *dd, u32 target, int dev, int addr, + void *buffer, int len); +int hfi1_twsi_blk_wr(struct hfi1_devdata *dd, u32 target, int dev, int addr, + const void *buffer, int len); + + +#endif /* _TWSI_H */ diff --git a/drivers/staging/rdma/hfi1/uc.c b/drivers/staging/rdma/hfi1/uc.c new file mode 100644 index 000000000000..b536f397737c --- /dev/null +++ b/drivers/staging/rdma/hfi1/uc.c @@ -0,0 +1,585 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "hfi.h" +#include "sdma.h" +#include "qp.h" + +/* cut down ridiculously long IB macro names */ +#define OP(x) IB_OPCODE_UC_##x + +/** + * hfi1_make_uc_req - construct a request packet (SEND, RDMA write) + * @qp: a pointer to the QP + * + * Return 1 if constructed; otherwise, return 0. + */ +int hfi1_make_uc_req(struct hfi1_qp *qp) +{ + struct hfi1_other_headers *ohdr; + struct hfi1_swqe *wqe; + unsigned long flags; + u32 hwords = 5; + u32 bth0 = 0; + u32 len; + u32 pmtu = qp->pmtu; + int ret = 0; + int middle = 0; + + spin_lock_irqsave(&qp->s_lock, flags); + + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_SEND_OK)) { + if (!(ib_hfi1_state_ops[qp->state] & HFI1_FLUSH_SEND)) + goto bail; + /* We are in the error state, flush the work request. */ + if (qp->s_last == qp->s_head) + goto bail; + /* If DMAs are in progress, we can't flush immediately. */ + if (atomic_read(&qp->s_iowait.sdma_busy)) { + qp->s_flags |= HFI1_S_WAIT_DMA; + goto bail; + } + clear_ahg(qp); + wqe = get_swqe_ptr(qp, qp->s_last); + hfi1_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR); + goto done; + } + + ohdr = &qp->s_hdr->ibh.u.oth; + if (qp->remote_ah_attr.ah_flags & IB_AH_GRH) + ohdr = &qp->s_hdr->ibh.u.l.oth; + + /* Get the next send request. */ + wqe = get_swqe_ptr(qp, qp->s_cur); + qp->s_wqe = NULL; + switch (qp->s_state) { + default: + if (!(ib_hfi1_state_ops[qp->state] & + HFI1_PROCESS_NEXT_SEND_OK)) + goto bail; + /* Check if send work queue is empty. */ + if (qp->s_cur == qp->s_head) { + clear_ahg(qp); + goto bail; + } + /* + * Start a new request. + */ + wqe->psn = qp->s_next_psn; + qp->s_psn = qp->s_next_psn; + qp->s_sge.sge = wqe->sg_list[0]; + qp->s_sge.sg_list = wqe->sg_list + 1; + qp->s_sge.num_sge = wqe->wr.num_sge; + qp->s_sge.total_len = wqe->length; + len = wqe->length; + qp->s_len = len; + switch (wqe->wr.opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + if (len > pmtu) { + qp->s_state = OP(SEND_FIRST); + len = pmtu; + break; + } + if (wqe->wr.opcode == IB_WR_SEND) + qp->s_state = OP(SEND_ONLY); + else { + qp->s_state = + OP(SEND_ONLY_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + } + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + qp->s_wqe = wqe; + if (++qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + ohdr->u.rc.reth.vaddr = + cpu_to_be64(wqe->wr.wr.rdma.remote_addr); + ohdr->u.rc.reth.rkey = + cpu_to_be32(wqe->wr.wr.rdma.rkey); + ohdr->u.rc.reth.length = cpu_to_be32(len); + hwords += sizeof(struct ib_reth) / 4; + if (len > pmtu) { + qp->s_state = OP(RDMA_WRITE_FIRST); + len = pmtu; + break; + } + if (wqe->wr.opcode == IB_WR_RDMA_WRITE) + qp->s_state = OP(RDMA_WRITE_ONLY); + else { + qp->s_state = + OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE); + /* Immediate data comes after the RETH */ + ohdr->u.rc.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + } + qp->s_wqe = wqe; + if (++qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + + default: + goto bail; + } + break; + + case OP(SEND_FIRST): + qp->s_state = OP(SEND_MIDDLE); + /* FALLTHROUGH */ + case OP(SEND_MIDDLE): + len = qp->s_len; + if (len > pmtu) { + len = pmtu; + middle = HFI1_CAP_IS_KSET(SDMA_AHG); + break; + } + if (wqe->wr.opcode == IB_WR_SEND) + qp->s_state = OP(SEND_LAST); + else { + qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + } + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + qp->s_wqe = wqe; + if (++qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + + case OP(RDMA_WRITE_FIRST): + qp->s_state = OP(RDMA_WRITE_MIDDLE); + /* FALLTHROUGH */ + case OP(RDMA_WRITE_MIDDLE): + len = qp->s_len; + if (len > pmtu) { + len = pmtu; + middle = HFI1_CAP_IS_KSET(SDMA_AHG); + break; + } + if (wqe->wr.opcode == IB_WR_RDMA_WRITE) + qp->s_state = OP(RDMA_WRITE_LAST); + else { + qp->s_state = + OP(RDMA_WRITE_LAST_WITH_IMMEDIATE); + /* Immediate data comes after the BTH */ + ohdr->u.imm_data = wqe->wr.ex.imm_data; + hwords += 1; + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + } + qp->s_wqe = wqe; + if (++qp->s_cur >= qp->s_size) + qp->s_cur = 0; + break; + } + qp->s_len -= len; + qp->s_hdrwords = hwords; + qp->s_cur_sge = &qp->s_sge; + qp->s_cur_size = len; + hfi1_make_ruc_header(qp, ohdr, bth0 | (qp->s_state << 24), + mask_psn(qp->s_next_psn++), middle); +done: + ret = 1; + goto unlock; + +bail: + qp->s_flags &= ~HFI1_S_BUSY; +unlock: + spin_unlock_irqrestore(&qp->s_lock, flags); + return ret; +} + +/** + * hfi1_uc_rcv - handle an incoming UC packet + * @ibp: the port the packet came in on + * @hdr: the header of the packet + * @rcv_flags: flags relevant to rcv processing + * @data: the packet data + * @tlen: the length of the packet + * @qp: the QP for this packet. + * + * This is called from qp_rcv() to process an incoming UC packet + * for the given QP. + * Called at interrupt level. + */ +void hfi1_uc_rcv(struct hfi1_packet *packet) +{ + struct hfi1_ibport *ibp = &packet->rcd->ppd->ibport_data; + struct hfi1_ib_header *hdr = packet->hdr; + u32 rcv_flags = packet->rcv_flags; + void *data = packet->ebuf; + u32 tlen = packet->tlen; + struct hfi1_qp *qp = packet->qp; + struct hfi1_other_headers *ohdr = packet->ohdr; + u32 opcode; + u32 hdrsize = packet->hlen; + u32 psn; + u32 pad; + struct ib_wc wc; + u32 pmtu = qp->pmtu; + struct ib_reth *reth; + int has_grh = rcv_flags & HFI1_HAS_GRH; + int ret; + u32 bth1; + struct ib_grh *grh = NULL; + + opcode = be32_to_cpu(ohdr->bth[0]); + if (hfi1_ruc_check_hdr(ibp, hdr, has_grh, qp, opcode)) + return; + + bth1 = be32_to_cpu(ohdr->bth[1]); + if (unlikely(bth1 & (HFI1_BECN_SMASK | HFI1_FECN_SMASK))) { + if (bth1 & HFI1_BECN_SMASK) { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 rqpn, lqpn; + u16 rlid = be16_to_cpu(hdr->lrh[3]); + u8 sl, sc5; + + lqpn = bth1 & HFI1_QPN_MASK; + rqpn = qp->remote_qpn; + + sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + sl = ibp->sc_to_sl[sc5]; + + process_becn(ppd, sl, rlid, lqpn, rqpn, + IB_CC_SVCTYPE_UC); + } + + if (bth1 & HFI1_FECN_SMASK) { + u16 pkey = (u16)be32_to_cpu(ohdr->bth[0]); + u16 slid = be16_to_cpu(hdr->lrh[3]); + u16 dlid = be16_to_cpu(hdr->lrh[1]); + u32 src_qp = qp->remote_qpn; + u8 sc5; + + sc5 = ibp->sl_to_sc[qp->remote_ah_attr.sl]; + + return_cnp(ibp, qp, src_qp, pkey, dlid, slid, sc5, grh); + } + } + + psn = be32_to_cpu(ohdr->bth[2]); + opcode >>= 24; + + /* Compare the PSN verses the expected PSN. */ + if (unlikely(cmp_psn(psn, qp->r_psn) != 0)) { + /* + * Handle a sequence error. + * Silently drop any current message. + */ + qp->r_psn = psn; +inv: + if (qp->r_state == OP(SEND_FIRST) || + qp->r_state == OP(SEND_MIDDLE)) { + set_bit(HFI1_R_REWIND_SGE, &qp->r_aflags); + qp->r_sge.num_sge = 0; + } else + hfi1_put_ss(&qp->r_sge); + qp->r_state = OP(SEND_LAST); + switch (opcode) { + case OP(SEND_FIRST): + case OP(SEND_ONLY): + case OP(SEND_ONLY_WITH_IMMEDIATE): + goto send_first; + + case OP(RDMA_WRITE_FIRST): + case OP(RDMA_WRITE_ONLY): + case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): + goto rdma_first; + + default: + goto drop; + } + } + + /* Check for opcode sequence errors. */ + switch (qp->r_state) { + case OP(SEND_FIRST): + case OP(SEND_MIDDLE): + if (opcode == OP(SEND_MIDDLE) || + opcode == OP(SEND_LAST) || + opcode == OP(SEND_LAST_WITH_IMMEDIATE)) + break; + goto inv; + + case OP(RDMA_WRITE_FIRST): + case OP(RDMA_WRITE_MIDDLE): + if (opcode == OP(RDMA_WRITE_MIDDLE) || + opcode == OP(RDMA_WRITE_LAST) || + opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE)) + break; + goto inv; + + default: + if (opcode == OP(SEND_FIRST) || + opcode == OP(SEND_ONLY) || + opcode == OP(SEND_ONLY_WITH_IMMEDIATE) || + opcode == OP(RDMA_WRITE_FIRST) || + opcode == OP(RDMA_WRITE_ONLY) || + opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE)) + break; + goto inv; + } + + if (qp->state == IB_QPS_RTR && !(qp->r_flags & HFI1_R_COMM_EST)) + qp_comm_est(qp); + + /* OK, process the packet. */ + switch (opcode) { + case OP(SEND_FIRST): + case OP(SEND_ONLY): + case OP(SEND_ONLY_WITH_IMMEDIATE): +send_first: + if (test_and_clear_bit(HFI1_R_REWIND_SGE, &qp->r_aflags)) + qp->r_sge = qp->s_rdma_read_sge; + else { + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) + goto op_err; + if (!ret) + goto drop; + /* + * qp->s_rdma_read_sge will be the owner + * of the mr references. + */ + qp->s_rdma_read_sge = qp->r_sge; + } + qp->r_rcv_len = 0; + if (opcode == OP(SEND_ONLY)) + goto no_immediate_data; + else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE)) + goto send_last_imm; + /* FALLTHROUGH */ + case OP(SEND_MIDDLE): + /* Check for invalid length PMTU or posted rwqe len. */ + if (unlikely(tlen != (hdrsize + pmtu + 4))) + goto rewind; + qp->r_rcv_len += pmtu; + if (unlikely(qp->r_rcv_len > qp->r_len)) + goto rewind; + hfi1_copy_sge(&qp->r_sge, data, pmtu, 0); + break; + + case OP(SEND_LAST_WITH_IMMEDIATE): +send_last_imm: + wc.ex.imm_data = ohdr->u.imm_data; + wc.wc_flags = IB_WC_WITH_IMM; + goto send_last; + case OP(SEND_LAST): +no_immediate_data: + wc.ex.imm_data = 0; + wc.wc_flags = 0; +send_last: + /* Get the number of bytes the message was padded by. */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + /* Check for invalid length. */ + /* LAST len should be >= 1 */ + if (unlikely(tlen < (hdrsize + pad + 4))) + goto rewind; + /* Don't count the CRC. */ + tlen -= (hdrsize + pad + 4); + wc.byte_len = tlen + qp->r_rcv_len; + if (unlikely(wc.byte_len > qp->r_len)) + goto rewind; + wc.opcode = IB_WC_RECV; + hfi1_copy_sge(&qp->r_sge, data, tlen, 0); + hfi1_put_ss(&qp->s_rdma_read_sge); +last_imm: + wc.wr_id = qp->r_wr_id; + wc.status = IB_WC_SUCCESS; + wc.qp = &qp->ibqp; + wc.src_qp = qp->remote_qpn; + wc.slid = qp->remote_ah_attr.dlid; + /* + * It seems that IB mandates the presence of an SL in a + * work completion only for the UD transport (see section + * 11.4.2 of IBTA Vol. 1). + * + * However, the way the SL is chosen below is consistent + * with the way that IB/qib works and is trying avoid + * introducing incompatibilities. + * + * See also OPA Vol. 1, section 9.7.6, and table 9-17. + */ + wc.sl = qp->remote_ah_attr.sl; + /* zero fields that are N/A */ + wc.vendor_err = 0; + wc.pkey_index = 0; + wc.dlid_path_bits = 0; + wc.port_num = 0; + /* Signal completion event if the solicited bit is set. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, + (ohdr->bth[0] & + cpu_to_be32(IB_BTH_SOLICITED)) != 0); + break; + + case OP(RDMA_WRITE_FIRST): + case OP(RDMA_WRITE_ONLY): + case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): /* consume RWQE */ +rdma_first: + if (unlikely(!(qp->qp_access_flags & + IB_ACCESS_REMOTE_WRITE))) { + goto drop; + } + reth = &ohdr->u.rc.reth; + qp->r_len = be32_to_cpu(reth->length); + qp->r_rcv_len = 0; + qp->r_sge.sg_list = NULL; + if (qp->r_len != 0) { + u32 rkey = be32_to_cpu(reth->rkey); + u64 vaddr = be64_to_cpu(reth->vaddr); + int ok; + + /* Check rkey */ + ok = hfi1_rkey_ok(qp, &qp->r_sge.sge, qp->r_len, + vaddr, rkey, IB_ACCESS_REMOTE_WRITE); + if (unlikely(!ok)) + goto drop; + qp->r_sge.num_sge = 1; + } else { + qp->r_sge.num_sge = 0; + qp->r_sge.sge.mr = NULL; + qp->r_sge.sge.vaddr = NULL; + qp->r_sge.sge.length = 0; + qp->r_sge.sge.sge_length = 0; + } + if (opcode == OP(RDMA_WRITE_ONLY)) + goto rdma_last; + else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE)) { + wc.ex.imm_data = ohdr->u.rc.imm_data; + goto rdma_last_imm; + } + /* FALLTHROUGH */ + case OP(RDMA_WRITE_MIDDLE): + /* Check for invalid length PMTU or posted rwqe len. */ + if (unlikely(tlen != (hdrsize + pmtu + 4))) + goto drop; + qp->r_rcv_len += pmtu; + if (unlikely(qp->r_rcv_len > qp->r_len)) + goto drop; + hfi1_copy_sge(&qp->r_sge, data, pmtu, 1); + break; + + case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE): + wc.ex.imm_data = ohdr->u.imm_data; +rdma_last_imm: + wc.wc_flags = IB_WC_WITH_IMM; + + /* Get the number of bytes the message was padded by. */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + /* Check for invalid length. */ + /* LAST len should be >= 1 */ + if (unlikely(tlen < (hdrsize + pad + 4))) + goto drop; + /* Don't count the CRC. */ + tlen -= (hdrsize + pad + 4); + if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) + goto drop; + if (test_and_clear_bit(HFI1_R_REWIND_SGE, &qp->r_aflags)) + hfi1_put_ss(&qp->s_rdma_read_sge); + else { + ret = hfi1_get_rwqe(qp, 1); + if (ret < 0) + goto op_err; + if (!ret) + goto drop; + } + wc.byte_len = qp->r_len; + wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; + hfi1_copy_sge(&qp->r_sge, data, tlen, 1); + hfi1_put_ss(&qp->r_sge); + goto last_imm; + + case OP(RDMA_WRITE_LAST): +rdma_last: + /* Get the number of bytes the message was padded by. */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + /* Check for invalid length. */ + /* LAST len should be >= 1 */ + if (unlikely(tlen < (hdrsize + pad + 4))) + goto drop; + /* Don't count the CRC. */ + tlen -= (hdrsize + pad + 4); + if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) + goto drop; + hfi1_copy_sge(&qp->r_sge, data, tlen, 1); + hfi1_put_ss(&qp->r_sge); + break; + + default: + /* Drop packet for unknown opcodes. */ + goto drop; + } + qp->r_psn++; + qp->r_state = opcode; + return; + +rewind: + set_bit(HFI1_R_REWIND_SGE, &qp->r_aflags); + qp->r_sge.num_sge = 0; +drop: + ibp->n_pkt_drops++; + return; + +op_err: + hfi1_rc_error(qp, IB_WC_LOC_QP_OP_ERR); + return; + +} diff --git a/drivers/staging/rdma/hfi1/ud.c b/drivers/staging/rdma/hfi1/ud.c new file mode 100644 index 000000000000..d40d1a1e10aa --- /dev/null +++ b/drivers/staging/rdma/hfi1/ud.c @@ -0,0 +1,885 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/net.h> +#include <rdma/ib_smi.h> + +#include "hfi.h" +#include "mad.h" +#include "qp.h" + +/** + * ud_loopback - handle send on loopback QPs + * @sqp: the sending QP + * @swqe: the send work request + * + * This is called from hfi1_make_ud_req() to forward a WQE addressed + * to the same HFI. + * Note that the receive interrupt handler may be calling hfi1_ud_rcv() + * while this is being called. + */ +static void ud_loopback(struct hfi1_qp *sqp, struct hfi1_swqe *swqe) +{ + struct hfi1_ibport *ibp = to_iport(sqp->ibqp.device, sqp->port_num); + struct hfi1_pportdata *ppd; + struct hfi1_qp *qp; + struct ib_ah_attr *ah_attr; + unsigned long flags; + struct hfi1_sge_state ssge; + struct hfi1_sge *sge; + struct ib_wc wc; + u32 length; + enum ib_qp_type sqptype, dqptype; + + rcu_read_lock(); + + qp = hfi1_lookup_qpn(ibp, swqe->wr.wr.ud.remote_qpn); + if (!qp) { + ibp->n_pkt_drops++; + rcu_read_unlock(); + return; + } + + sqptype = sqp->ibqp.qp_type == IB_QPT_GSI ? + IB_QPT_UD : sqp->ibqp.qp_type; + dqptype = qp->ibqp.qp_type == IB_QPT_GSI ? + IB_QPT_UD : qp->ibqp.qp_type; + + if (dqptype != sqptype || + !(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK)) { + ibp->n_pkt_drops++; + goto drop; + } + + ah_attr = &to_iah(swqe->wr.wr.ud.ah)->attr; + ppd = ppd_from_ibp(ibp); + + if (qp->ibqp.qp_num > 1) { + u16 pkey; + u16 slid; + u8 sc5 = ibp->sl_to_sc[ah_attr->sl]; + + pkey = hfi1_get_pkey(ibp, sqp->s_pkey_index); + slid = ppd->lid | (ah_attr->src_path_bits & + ((1 << ppd->lmc) - 1)); + if (unlikely(ingress_pkey_check(ppd, pkey, sc5, + qp->s_pkey_index, slid))) { + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_PKEY, pkey, + ah_attr->sl, + sqp->ibqp.qp_num, qp->ibqp.qp_num, + cpu_to_be16(slid), + cpu_to_be16(ah_attr->dlid)); + goto drop; + } + } + + /* + * Check that the qkey matches (except for QP0, see 9.6.1.4.1). + * Qkeys with the high order bit set mean use the + * qkey from the QP context instead of the WR (see 10.2.5). + */ + if (qp->ibqp.qp_num) { + u32 qkey; + + qkey = (int)swqe->wr.wr.ud.remote_qkey < 0 ? + sqp->qkey : swqe->wr.wr.ud.remote_qkey; + if (unlikely(qkey != qp->qkey)) { + u16 lid; + + lid = ppd->lid | (ah_attr->src_path_bits & + ((1 << ppd->lmc) - 1)); + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_QKEY, qkey, + ah_attr->sl, + sqp->ibqp.qp_num, qp->ibqp.qp_num, + cpu_to_be16(lid), + cpu_to_be16(ah_attr->dlid)); + goto drop; + } + } + + /* + * A GRH is expected to precede the data even if not + * present on the wire. + */ + length = swqe->length; + memset(&wc, 0, sizeof(wc)); + wc.byte_len = length + sizeof(struct ib_grh); + + if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) { + wc.wc_flags = IB_WC_WITH_IMM; + wc.ex.imm_data = swqe->wr.ex.imm_data; + } + + spin_lock_irqsave(&qp->r_lock, flags); + + /* + * Get the next work request entry to find where to put the data. + */ + if (qp->r_flags & HFI1_R_REUSE_SGE) + qp->r_flags &= ~HFI1_R_REUSE_SGE; + else { + int ret; + + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) { + hfi1_rc_error(qp, IB_WC_LOC_QP_OP_ERR); + goto bail_unlock; + } + if (!ret) { + if (qp->ibqp.qp_num == 0) + ibp->n_vl15_dropped++; + goto bail_unlock; + } + } + /* Silently drop packets which are too big. */ + if (unlikely(wc.byte_len > qp->r_len)) { + qp->r_flags |= HFI1_R_REUSE_SGE; + ibp->n_pkt_drops++; + goto bail_unlock; + } + + if (ah_attr->ah_flags & IB_AH_GRH) { + hfi1_copy_sge(&qp->r_sge, &ah_attr->grh, + sizeof(struct ib_grh), 1); + wc.wc_flags |= IB_WC_GRH; + } else + hfi1_skip_sge(&qp->r_sge, sizeof(struct ib_grh), 1); + ssge.sg_list = swqe->sg_list + 1; + ssge.sge = *swqe->sg_list; + ssge.num_sge = swqe->wr.num_sge; + sge = &ssge.sge; + while (length) { + u32 len = sge->length; + + if (len > length) + len = length; + if (len > sge->sge_length) + len = sge->sge_length; + WARN_ON_ONCE(len == 0); + hfi1_copy_sge(&qp->r_sge, sge->vaddr, len, 1); + sge->vaddr += len; + sge->length -= len; + sge->sge_length -= len; + if (sge->sge_length == 0) { + if (--ssge.num_sge) + *sge = *ssge.sg_list++; + } else if (sge->length == 0 && sge->mr->lkey) { + if (++sge->n >= HFI1_SEGSZ) { + if (++sge->m >= sge->mr->mapsz) + break; + sge->n = 0; + } + sge->vaddr = + sge->mr->map[sge->m]->segs[sge->n].vaddr; + sge->length = + sge->mr->map[sge->m]->segs[sge->n].length; + } + length -= len; + } + hfi1_put_ss(&qp->r_sge); + if (!test_and_clear_bit(HFI1_R_WRID_VALID, &qp->r_aflags)) + goto bail_unlock; + wc.wr_id = qp->r_wr_id; + wc.status = IB_WC_SUCCESS; + wc.opcode = IB_WC_RECV; + wc.qp = &qp->ibqp; + wc.src_qp = sqp->ibqp.qp_num; + if (qp->ibqp.qp_type == IB_QPT_GSI || qp->ibqp.qp_type == IB_QPT_SMI) { + if (sqp->ibqp.qp_type == IB_QPT_GSI || + sqp->ibqp.qp_type == IB_QPT_SMI) + wc.pkey_index = swqe->wr.wr.ud.pkey_index; + else + wc.pkey_index = sqp->s_pkey_index; + } else { + wc.pkey_index = 0; + } + wc.slid = ppd->lid | (ah_attr->src_path_bits & ((1 << ppd->lmc) - 1)); + /* Check for loopback when the port lid is not set */ + if (wc.slid == 0 && sqp->ibqp.qp_type == IB_QPT_GSI) + wc.slid = HFI1_PERMISSIVE_LID; + wc.sl = ah_attr->sl; + wc.dlid_path_bits = ah_attr->dlid & ((1 << ppd->lmc) - 1); + wc.port_num = qp->port_num; + /* Signal completion event if the solicited bit is set. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, + swqe->wr.send_flags & IB_SEND_SOLICITED); + ibp->n_loop_pkts++; +bail_unlock: + spin_unlock_irqrestore(&qp->r_lock, flags); +drop: + rcu_read_unlock(); +} + +/** + * hfi1_make_ud_req - construct a UD request packet + * @qp: the QP + * + * Return 1 if constructed; otherwise, return 0. + */ +int hfi1_make_ud_req(struct hfi1_qp *qp) +{ + struct hfi1_other_headers *ohdr; + struct ib_ah_attr *ah_attr; + struct hfi1_pportdata *ppd; + struct hfi1_ibport *ibp; + struct hfi1_swqe *wqe; + unsigned long flags; + u32 nwords; + u32 extra_bytes; + u32 bth0; + u16 lrh0; + u16 lid; + int ret = 0; + int next_cur; + u8 sc5; + + spin_lock_irqsave(&qp->s_lock, flags); + + if (!(ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_NEXT_SEND_OK)) { + if (!(ib_hfi1_state_ops[qp->state] & HFI1_FLUSH_SEND)) + goto bail; + /* We are in the error state, flush the work request. */ + if (qp->s_last == qp->s_head) + goto bail; + /* If DMAs are in progress, we can't flush immediately. */ + if (atomic_read(&qp->s_iowait.sdma_busy)) { + qp->s_flags |= HFI1_S_WAIT_DMA; + goto bail; + } + wqe = get_swqe_ptr(qp, qp->s_last); + hfi1_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR); + goto done; + } + + if (qp->s_cur == qp->s_head) + goto bail; + + wqe = get_swqe_ptr(qp, qp->s_cur); + next_cur = qp->s_cur + 1; + if (next_cur >= qp->s_size) + next_cur = 0; + + /* Construct the header. */ + ibp = to_iport(qp->ibqp.device, qp->port_num); + ppd = ppd_from_ibp(ibp); + ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr; + if (ah_attr->dlid < HFI1_MULTICAST_LID_BASE || + ah_attr->dlid == HFI1_PERMISSIVE_LID) { + lid = ah_attr->dlid & ~((1 << ppd->lmc) - 1); + if (unlikely(!loopback && (lid == ppd->lid || + (lid == HFI1_PERMISSIVE_LID && + qp->ibqp.qp_type == IB_QPT_GSI)))) { + /* + * If DMAs are in progress, we can't generate + * a completion for the loopback packet since + * it would be out of order. + * Instead of waiting, we could queue a + * zero length descriptor so we get a callback. + */ + if (atomic_read(&qp->s_iowait.sdma_busy)) { + qp->s_flags |= HFI1_S_WAIT_DMA; + goto bail; + } + qp->s_cur = next_cur; + spin_unlock_irqrestore(&qp->s_lock, flags); + ud_loopback(qp, wqe); + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_send_complete(qp, wqe, IB_WC_SUCCESS); + goto done; + } + } + + qp->s_cur = next_cur; + extra_bytes = -wqe->length & 3; + nwords = (wqe->length + extra_bytes) >> 2; + + /* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */ + qp->s_hdrwords = 7; + qp->s_cur_size = wqe->length; + qp->s_cur_sge = &qp->s_sge; + qp->s_srate = ah_attr->static_rate; + qp->srate_mbps = ib_rate_to_mbps(qp->s_srate); + qp->s_wqe = wqe; + qp->s_sge.sge = wqe->sg_list[0]; + qp->s_sge.sg_list = wqe->sg_list + 1; + qp->s_sge.num_sge = wqe->wr.num_sge; + qp->s_sge.total_len = wqe->length; + + if (ah_attr->ah_flags & IB_AH_GRH) { + /* Header size in 32-bit words. */ + qp->s_hdrwords += hfi1_make_grh(ibp, &qp->s_hdr->ibh.u.l.grh, + &ah_attr->grh, + qp->s_hdrwords, nwords); + lrh0 = HFI1_LRH_GRH; + ohdr = &qp->s_hdr->ibh.u.l.oth; + /* + * Don't worry about sending to locally attached multicast + * QPs. It is unspecified by the spec. what happens. + */ + } else { + /* Header size in 32-bit words. */ + lrh0 = HFI1_LRH_BTH; + ohdr = &qp->s_hdr->ibh.u.oth; + } + if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) { + qp->s_hdrwords++; + ohdr->u.ud.imm_data = wqe->wr.ex.imm_data; + bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24; + } else + bth0 = IB_OPCODE_UD_SEND_ONLY << 24; + sc5 = ibp->sl_to_sc[ah_attr->sl]; + lrh0 |= (ah_attr->sl & 0xf) << 4; + if (qp->ibqp.qp_type == IB_QPT_SMI) { + lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */ + qp->s_sc = 0xf; + } else { + lrh0 |= (sc5 & 0xf) << 12; + qp->s_sc = sc5; + } + qp->s_hdr->ibh.lrh[0] = cpu_to_be16(lrh0); + qp->s_hdr->ibh.lrh[1] = cpu_to_be16(ah_attr->dlid); /* DEST LID */ + qp->s_hdr->ibh.lrh[2] = + cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC); + if (ah_attr->dlid == be16_to_cpu(IB_LID_PERMISSIVE)) + qp->s_hdr->ibh.lrh[3] = IB_LID_PERMISSIVE; + else { + lid = ppd->lid; + if (lid) { + lid |= ah_attr->src_path_bits & ((1 << ppd->lmc) - 1); + qp->s_hdr->ibh.lrh[3] = cpu_to_be16(lid); + } else + qp->s_hdr->ibh.lrh[3] = IB_LID_PERMISSIVE; + } + if (wqe->wr.send_flags & IB_SEND_SOLICITED) + bth0 |= IB_BTH_SOLICITED; + bth0 |= extra_bytes << 20; + if (qp->ibqp.qp_type == IB_QPT_GSI || qp->ibqp.qp_type == IB_QPT_SMI) + bth0 |= hfi1_get_pkey(ibp, wqe->wr.wr.ud.pkey_index); + else + bth0 |= hfi1_get_pkey(ibp, qp->s_pkey_index); + ohdr->bth[0] = cpu_to_be32(bth0); + ohdr->bth[1] = cpu_to_be32(wqe->wr.wr.ud.remote_qpn); + ohdr->bth[2] = cpu_to_be32(mask_psn(qp->s_next_psn++)); + /* + * Qkeys with the high order bit set mean use the + * qkey from the QP context instead of the WR (see 10.2.5). + */ + ohdr->u.ud.deth[0] = cpu_to_be32((int)wqe->wr.wr.ud.remote_qkey < 0 ? + qp->qkey : wqe->wr.wr.ud.remote_qkey); + ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num); + /* disarm any ahg */ + qp->s_hdr->ahgcount = 0; + qp->s_hdr->ahgidx = 0; + qp->s_hdr->tx_flags = 0; + qp->s_hdr->sde = NULL; + +done: + ret = 1; + goto unlock; + +bail: + qp->s_flags &= ~HFI1_S_BUSY; +unlock: + spin_unlock_irqrestore(&qp->s_lock, flags); + return ret; +} + +/* + * Hardware can't check this so we do it here. + * + * This is a slightly different algorithm than the standard pkey check. It + * special cases the management keys and allows for 0x7fff and 0xffff to be in + * the table at the same time. + * + * @returns the index found or -1 if not found + */ +int hfi1_lookup_pkey_idx(struct hfi1_ibport *ibp, u16 pkey) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + unsigned i; + + if (pkey == FULL_MGMT_P_KEY || pkey == LIM_MGMT_P_KEY) { + unsigned lim_idx = -1; + + for (i = 0; i < ARRAY_SIZE(ppd->pkeys); ++i) { + /* here we look for an exact match */ + if (ppd->pkeys[i] == pkey) + return i; + if (ppd->pkeys[i] == LIM_MGMT_P_KEY) + lim_idx = i; + } + + /* did not find 0xffff return 0x7fff idx if found */ + if (pkey == FULL_MGMT_P_KEY) + return lim_idx; + + /* no match... */ + return -1; + } + + pkey &= 0x7fff; /* remove limited/full membership bit */ + + for (i = 0; i < ARRAY_SIZE(ppd->pkeys); ++i) + if ((ppd->pkeys[i] & 0x7fff) == pkey) + return i; + + /* + * Should not get here, this means hardware failed to validate pkeys. + */ + return -1; +} + +void return_cnp(struct hfi1_ibport *ibp, struct hfi1_qp *qp, u32 remote_qpn, + u32 pkey, u32 slid, u32 dlid, u8 sc5, + const struct ib_grh *old_grh) +{ + u64 pbc, pbc_flags = 0; + u32 bth0, plen, vl, hwords = 5; + u16 lrh0; + u8 sl = ibp->sc_to_sl[sc5]; + struct hfi1_ib_header hdr; + struct hfi1_other_headers *ohdr; + struct pio_buf *pbuf; + struct send_context *ctxt = qp_to_send_context(qp, sc5); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + if (old_grh) { + struct ib_grh *grh = &hdr.u.l.grh; + + grh->version_tclass_flow = old_grh->version_tclass_flow; + grh->paylen = cpu_to_be16((hwords - 2 + SIZE_OF_CRC) << 2); + grh->hop_limit = 0xff; + grh->sgid = old_grh->dgid; + grh->dgid = old_grh->sgid; + ohdr = &hdr.u.l.oth; + lrh0 = HFI1_LRH_GRH; + hwords += sizeof(struct ib_grh) / sizeof(u32); + } else { + ohdr = &hdr.u.oth; + lrh0 = HFI1_LRH_BTH; + } + + lrh0 |= (sc5 & 0xf) << 12 | sl << 4; + + bth0 = pkey | (IB_OPCODE_CNP << 24); + ohdr->bth[0] = cpu_to_be32(bth0); + + ohdr->bth[1] = cpu_to_be32(remote_qpn | (1 << HFI1_BECN_SHIFT)); + ohdr->bth[2] = 0; /* PSN 0 */ + + hdr.lrh[0] = cpu_to_be16(lrh0); + hdr.lrh[1] = cpu_to_be16(dlid); + hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC); + hdr.lrh[3] = cpu_to_be16(slid); + + plen = 2 /* PBC */ + hwords; + pbc_flags |= (!!(sc5 & 0x10)) << PBC_DC_INFO_SHIFT; + vl = sc_to_vlt(ppd->dd, sc5); + pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); + if (ctxt) { + pbuf = sc_buffer_alloc(ctxt, plen, NULL, NULL); + if (pbuf) + ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, + &hdr, hwords); + } +} + +/* + * opa_smp_check() - Do the regular pkey checking, and the additional + * checks for SMPs specified in OPAv1 rev 0.90, section 9.10.26 + * ("SMA Packet Checks"). + * + * Note that: + * - Checks are done using the pkey directly from the packet's BTH, + * and specifically _not_ the pkey that we attach to the completion, + * which may be different. + * - These checks are specifically for "non-local" SMPs (i.e., SMPs + * which originated on another node). SMPs which are sent from, and + * destined to this node are checked in opa_local_smp_check(). + * + * At the point where opa_smp_check() is called, we know: + * - destination QP is QP0 + * + * opa_smp_check() returns 0 if all checks succeed, 1 otherwise. + */ +static int opa_smp_check(struct hfi1_ibport *ibp, u16 pkey, u8 sc5, + struct hfi1_qp *qp, u16 slid, struct opa_smp *smp) +{ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + /* + * I don't think it's possible for us to get here with sc != 0xf, + * but check it to be certain. + */ + if (sc5 != 0xf) + return 1; + + if (rcv_pkey_check(ppd, pkey, sc5, slid)) + return 1; + + /* + * At this point we know (and so don't need to check again) that + * the pkey is either LIM_MGMT_P_KEY, or FULL_MGMT_P_KEY + * (see ingress_pkey_check). + */ + if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE && + smp->mgmt_class != IB_MGMT_CLASS_SUBN_LID_ROUTED) { + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; + } + + /* + * SMPs fall into one of four (disjoint) categories: + * SMA request, SMA response, trap, or trap repress. + * Our response depends, in part, on which type of + * SMP we're processing. + * + * If this is not an SMA request, or trap repress: + * - accept MAD if the port is running an SM + * - pkey == FULL_MGMT_P_KEY => + * reply with unsupported method (i.e., just mark + * the smp's status field here, and let it be + * processed normally) + * - pkey != LIM_MGMT_P_KEY => + * increment port recv constraint errors, drop MAD + * If this is an SMA request or trap repress: + * - pkey != FULL_MGMT_P_KEY => + * increment port recv constraint errors, drop MAD + */ + switch (smp->method) { + case IB_MGMT_METHOD_GET: + case IB_MGMT_METHOD_SET: + case IB_MGMT_METHOD_REPORT: + case IB_MGMT_METHOD_TRAP_REPRESS: + if (pkey != FULL_MGMT_P_KEY) { + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; + } + break; + case IB_MGMT_METHOD_SEND: + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_GET_RESP: + case IB_MGMT_METHOD_REPORT_RESP: + if (ibp->port_cap_flags & IB_PORT_SM) + return 0; + if (pkey == FULL_MGMT_P_KEY) { + smp->status |= IB_SMP_UNSUP_METHOD; + return 0; + } + if (pkey != LIM_MGMT_P_KEY) { + ingress_pkey_table_fail(ppd, pkey, slid); + return 1; + } + break; + default: + break; + } + return 0; +} + + +/** + * hfi1_ud_rcv - receive an incoming UD packet + * @ibp: the port the packet came in on + * @hdr: the packet header + * @rcv_flags: flags relevant to rcv processing + * @data: the packet data + * @tlen: the packet length + * @qp: the QP the packet came on + * + * This is called from qp_rcv() to process an incoming UD packet + * for the given QP. + * Called at interrupt level. + */ +void hfi1_ud_rcv(struct hfi1_packet *packet) +{ + struct hfi1_other_headers *ohdr = packet->ohdr; + int opcode; + u32 hdrsize = packet->hlen; + u32 pad; + struct ib_wc wc; + u32 qkey; + u32 src_qp; + u16 dlid, pkey; + int mgmt_pkey_idx = -1; + struct hfi1_ibport *ibp = &packet->rcd->ppd->ibport_data; + struct hfi1_ib_header *hdr = packet->hdr; + u32 rcv_flags = packet->rcv_flags; + void *data = packet->ebuf; + u32 tlen = packet->tlen; + struct hfi1_qp *qp = packet->qp; + bool has_grh = rcv_flags & HFI1_HAS_GRH; + bool sc4_bit = has_sc4_bit(packet); + u8 sc; + u32 bth1; + int is_mcast; + struct ib_grh *grh = NULL; + + qkey = be32_to_cpu(ohdr->u.ud.deth[0]); + src_qp = be32_to_cpu(ohdr->u.ud.deth[1]) & HFI1_QPN_MASK; + dlid = be16_to_cpu(hdr->lrh[1]); + is_mcast = (dlid > HFI1_MULTICAST_LID_BASE) && + (dlid != HFI1_PERMISSIVE_LID); + bth1 = be32_to_cpu(ohdr->bth[1]); + if (unlikely(bth1 & HFI1_BECN_SMASK)) { + /* + * In pre-B0 h/w the CNP_OPCODE is handled via an + * error path (errata 291394). + */ + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 lqpn = be32_to_cpu(ohdr->bth[1]) & HFI1_QPN_MASK; + u8 sl, sc5; + + sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + sc5 |= sc4_bit; + sl = ibp->sc_to_sl[sc5]; + + process_becn(ppd, sl, 0, lqpn, 0, IB_CC_SVCTYPE_UD); + } + + /* + * The opcode is in the low byte when its in network order + * (top byte when in host order). + */ + opcode = be32_to_cpu(ohdr->bth[0]) >> 24; + opcode &= 0xff; + + pkey = (u16)be32_to_cpu(ohdr->bth[0]); + + if (!is_mcast && (opcode != IB_OPCODE_CNP) && bth1 & HFI1_FECN_SMASK) { + u16 slid = be16_to_cpu(hdr->lrh[3]); + u8 sc5; + + sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + sc5 |= sc4_bit; + + return_cnp(ibp, qp, src_qp, pkey, dlid, slid, sc5, grh); + } + /* + * Get the number of bytes the message was padded by + * and drop incomplete packets. + */ + pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3; + if (unlikely(tlen < (hdrsize + pad + 4))) + goto drop; + + tlen -= hdrsize + pad + 4; + + /* + * Check that the permissive LID is only used on QP0 + * and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1). + */ + if (qp->ibqp.qp_num) { + if (unlikely(hdr->lrh[1] == IB_LID_PERMISSIVE || + hdr->lrh[3] == IB_LID_PERMISSIVE)) + goto drop; + if (qp->ibqp.qp_num > 1) { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u16 slid; + u8 sc5; + + sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + sc5 |= sc4_bit; + + slid = be16_to_cpu(hdr->lrh[3]); + if (unlikely(rcv_pkey_check(ppd, pkey, sc5, slid))) { + /* + * Traps will not be sent for packets dropped + * by the HW. This is fine, as sending trap + * for invalid pkeys is optional according to + * IB spec (release 1.3, section 10.9.4) + */ + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_PKEY, + pkey, + (be16_to_cpu(hdr->lrh[0]) >> 4) & + 0xF, + src_qp, qp->ibqp.qp_num, + hdr->lrh[3], hdr->lrh[1]); + return; + } + } else { + /* GSI packet */ + mgmt_pkey_idx = hfi1_lookup_pkey_idx(ibp, pkey); + if (mgmt_pkey_idx < 0) + goto drop; + + } + if (unlikely(qkey != qp->qkey)) { + hfi1_bad_pqkey(ibp, IB_NOTICE_TRAP_BAD_QKEY, qkey, + (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF, + src_qp, qp->ibqp.qp_num, + hdr->lrh[3], hdr->lrh[1]); + return; + } + /* Drop invalid MAD packets (see 13.5.3.1). */ + if (unlikely(qp->ibqp.qp_num == 1 && + (tlen > 2048 || + (be16_to_cpu(hdr->lrh[0]) >> 12) == 15))) + goto drop; + } else { + /* Received on QP0, and so by definition, this is an SMP */ + struct opa_smp *smp = (struct opa_smp *)data; + u16 slid = be16_to_cpu(hdr->lrh[3]); + u8 sc5; + + sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + sc5 |= sc4_bit; + + if (opa_smp_check(ibp, pkey, sc5, qp, slid, smp)) + goto drop; + + if (tlen > 2048) + goto drop; + if ((hdr->lrh[1] == IB_LID_PERMISSIVE || + hdr->lrh[3] == IB_LID_PERMISSIVE) && + smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + goto drop; + + /* look up SMI pkey */ + mgmt_pkey_idx = hfi1_lookup_pkey_idx(ibp, pkey); + if (mgmt_pkey_idx < 0) + goto drop; + + } + + if (qp->ibqp.qp_num > 1 && + opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { + wc.ex.imm_data = ohdr->u.ud.imm_data; + wc.wc_flags = IB_WC_WITH_IMM; + tlen -= sizeof(u32); + } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { + wc.ex.imm_data = 0; + wc.wc_flags = 0; + } else + goto drop; + + /* + * A GRH is expected to precede the data even if not + * present on the wire. + */ + wc.byte_len = tlen + sizeof(struct ib_grh); + + /* + * Get the next work request entry to find where to put the data. + */ + if (qp->r_flags & HFI1_R_REUSE_SGE) + qp->r_flags &= ~HFI1_R_REUSE_SGE; + else { + int ret; + + ret = hfi1_get_rwqe(qp, 0); + if (ret < 0) { + hfi1_rc_error(qp, IB_WC_LOC_QP_OP_ERR); + return; + } + if (!ret) { + if (qp->ibqp.qp_num == 0) + ibp->n_vl15_dropped++; + return; + } + } + /* Silently drop packets which are too big. */ + if (unlikely(wc.byte_len > qp->r_len)) { + qp->r_flags |= HFI1_R_REUSE_SGE; + goto drop; + } + if (has_grh) { + hfi1_copy_sge(&qp->r_sge, &hdr->u.l.grh, + sizeof(struct ib_grh), 1); + wc.wc_flags |= IB_WC_GRH; + } else + hfi1_skip_sge(&qp->r_sge, sizeof(struct ib_grh), 1); + hfi1_copy_sge(&qp->r_sge, data, wc.byte_len - sizeof(struct ib_grh), 1); + hfi1_put_ss(&qp->r_sge); + if (!test_and_clear_bit(HFI1_R_WRID_VALID, &qp->r_aflags)) + return; + wc.wr_id = qp->r_wr_id; + wc.status = IB_WC_SUCCESS; + wc.opcode = IB_WC_RECV; + wc.vendor_err = 0; + wc.qp = &qp->ibqp; + wc.src_qp = src_qp; + + if (qp->ibqp.qp_type == IB_QPT_GSI || + qp->ibqp.qp_type == IB_QPT_SMI) { + if (mgmt_pkey_idx < 0) { + if (net_ratelimit()) { + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct hfi1_devdata *dd = ppd->dd; + + dd_dev_err(dd, "QP type %d mgmt_pkey_idx < 0 and packet not dropped???\n", + qp->ibqp.qp_type); + mgmt_pkey_idx = 0; + } + } + wc.pkey_index = (unsigned)mgmt_pkey_idx; + } else + wc.pkey_index = 0; + + wc.slid = be16_to_cpu(hdr->lrh[3]); + sc = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; + sc |= sc4_bit; + wc.sl = ibp->sc_to_sl[sc]; + + /* + * Save the LMC lower bits if the destination LID is a unicast LID. + */ + wc.dlid_path_bits = dlid >= HFI1_MULTICAST_LID_BASE ? 0 : + dlid & ((1 << ppd_from_ibp(ibp)->lmc) - 1); + wc.port_num = qp->port_num; + /* Signal completion event if the solicited bit is set. */ + hfi1_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, + (ohdr->bth[0] & + cpu_to_be32(IB_BTH_SOLICITED)) != 0); + return; + +drop: + ibp->n_pkt_drops++; +} diff --git a/drivers/staging/rdma/hfi1/user_pages.c b/drivers/staging/rdma/hfi1/user_pages.c new file mode 100644 index 000000000000..9071afbd7bf4 --- /dev/null +++ b/drivers/staging/rdma/hfi1/user_pages.c @@ -0,0 +1,156 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/mm.h> +#include <linux/device.h> + +#include "hfi.h" + +static void __hfi1_release_user_pages(struct page **p, size_t num_pages, + int dirty) +{ + size_t i; + + for (i = 0; i < num_pages; i++) { + if (dirty) + set_page_dirty_lock(p[i]); + put_page(p[i]); + } +} + +/* + * Call with current->mm->mmap_sem held. + */ +static int __hfi1_get_user_pages(unsigned long start_page, size_t num_pages, + struct page **p) +{ + unsigned long lock_limit; + size_t got; + int ret; + + lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; + + if (num_pages > lock_limit && !capable(CAP_IPC_LOCK)) { + ret = -ENOMEM; + goto bail; + } + + for (got = 0; got < num_pages; got += ret) { + ret = get_user_pages(current, current->mm, + start_page + got * PAGE_SIZE, + num_pages - got, 1, 1, + p + got, NULL); + if (ret < 0) + goto bail_release; + } + + current->mm->pinned_vm += num_pages; + + ret = 0; + goto bail; + +bail_release: + __hfi1_release_user_pages(p, got, 0); +bail: + return ret; +} + +/** + * hfi1_map_page - a safety wrapper around pci_map_page() + * + */ +dma_addr_t hfi1_map_page(struct pci_dev *hwdev, struct page *page, + unsigned long offset, size_t size, int direction) +{ + dma_addr_t phys; + + phys = pci_map_page(hwdev, page, offset, size, direction); + + return phys; +} + +/** + * hfi1_get_user_pages - lock user pages into memory + * @start_page: the start page + * @num_pages: the number of pages + * @p: the output page structures + * + * This function takes a given start page (page aligned user virtual + * address) and pins it and the following specified number of pages. For + * now, num_pages is always 1, but that will probably change at some point + * (because caller is doing expected sends on a single virtually contiguous + * buffer, so we can do all pages at once). + */ +int hfi1_get_user_pages(unsigned long start_page, size_t num_pages, + struct page **p) +{ + int ret; + + down_write(¤t->mm->mmap_sem); + + ret = __hfi1_get_user_pages(start_page, num_pages, p); + + up_write(¤t->mm->mmap_sem); + + return ret; +} + +void hfi1_release_user_pages(struct page **p, size_t num_pages) +{ + if (current->mm) /* during close after signal, mm can be NULL */ + down_write(¤t->mm->mmap_sem); + + __hfi1_release_user_pages(p, num_pages, 1); + + if (current->mm) { + current->mm->pinned_vm -= num_pages; + up_write(¤t->mm->mmap_sem); + } +} diff --git a/drivers/staging/rdma/hfi1/user_sdma.c b/drivers/staging/rdma/hfi1/user_sdma.c new file mode 100644 index 000000000000..55526613a522 --- /dev/null +++ b/drivers/staging/rdma/hfi1/user_sdma.c @@ -0,0 +1,1444 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/highmem.h> +#include <linux/io.h> +#include <linux/uio.h> +#include <linux/rbtree.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/mmu_context.h> +#include <linux/module.h> +#include <linux/vmalloc.h> + +#include "hfi.h" +#include "sdma.h" +#include "user_sdma.h" +#include "sdma.h" +#include "verbs.h" /* for the headers */ +#include "common.h" /* for struct hfi1_tid_info */ +#include "trace.h" + +static uint hfi1_sdma_comp_ring_size = 128; +module_param_named(sdma_comp_size, hfi1_sdma_comp_ring_size, uint, S_IRUGO); +MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 128"); + +/* The maximum number of Data io vectors per message/request */ +#define MAX_VECTORS_PER_REQ 8 +/* + * Maximum number of packet to send from each message/request + * before moving to the next one. + */ +#define MAX_PKTS_PER_QUEUE 16 + +#define num_pages(x) (1 + ((((x) - 1) & PAGE_MASK) >> PAGE_SHIFT)) + +#define req_opcode(x) \ + (((x) >> HFI1_SDMA_REQ_OPCODE_SHIFT) & HFI1_SDMA_REQ_OPCODE_MASK) +#define req_version(x) \ + (((x) >> HFI1_SDMA_REQ_VERSION_SHIFT) & HFI1_SDMA_REQ_OPCODE_MASK) +#define req_iovcnt(x) \ + (((x) >> HFI1_SDMA_REQ_IOVCNT_SHIFT) & HFI1_SDMA_REQ_IOVCNT_MASK) + +/* Number of BTH.PSN bits used for sequence number in expected rcvs */ +#define BTH_SEQ_MASK 0x7ffull + +/* + * Define fields in the KDETH header so we can update the header + * template. + */ +#define KDETH_OFFSET_SHIFT 0 +#define KDETH_OFFSET_MASK 0x7fff +#define KDETH_OM_SHIFT 15 +#define KDETH_OM_MASK 0x1 +#define KDETH_TID_SHIFT 16 +#define KDETH_TID_MASK 0x3ff +#define KDETH_TIDCTRL_SHIFT 26 +#define KDETH_TIDCTRL_MASK 0x3 +#define KDETH_INTR_SHIFT 28 +#define KDETH_INTR_MASK 0x1 +#define KDETH_SH_SHIFT 29 +#define KDETH_SH_MASK 0x1 +#define KDETH_HCRC_UPPER_SHIFT 16 +#define KDETH_HCRC_UPPER_MASK 0xff +#define KDETH_HCRC_LOWER_SHIFT 24 +#define KDETH_HCRC_LOWER_MASK 0xff + +#define PBC2LRH(x) ((((x) & 0xfff) << 2) - 4) +#define LRH2PBC(x) ((((x) >> 2) + 1) & 0xfff) + +#define KDETH_GET(val, field) \ + (((le32_to_cpu((val))) >> KDETH_##field##_SHIFT) & KDETH_##field##_MASK) +#define KDETH_SET(dw, field, val) do { \ + u32 dwval = le32_to_cpu(dw); \ + dwval &= ~(KDETH_##field##_MASK << KDETH_##field##_SHIFT); \ + dwval |= (((val) & KDETH_##field##_MASK) << \ + KDETH_##field##_SHIFT); \ + dw = cpu_to_le32(dwval); \ + } while (0) + +#define AHG_HEADER_SET(arr, idx, dw, bit, width, value) \ + do { \ + if ((idx) < ARRAY_SIZE((arr))) \ + (arr)[(idx++)] = sdma_build_ahg_descriptor( \ + (__force u16)(value), (dw), (bit), \ + (width)); \ + else \ + return -ERANGE; \ + } while (0) + +/* KDETH OM multipliers and switch over point */ +#define KDETH_OM_SMALL 4 +#define KDETH_OM_LARGE 64 +#define KDETH_OM_MAX_SIZE (1 << ((KDETH_OM_LARGE / KDETH_OM_SMALL) + 1)) + +/* Last packet in the request */ +#define USER_SDMA_TXREQ_FLAGS_LAST_PKT (1 << 0) + +#define SDMA_REQ_IN_USE 0 +#define SDMA_REQ_FOR_THREAD 1 +#define SDMA_REQ_SEND_DONE 2 +#define SDMA_REQ_HAVE_AHG 3 +#define SDMA_REQ_HAS_ERROR 4 +#define SDMA_REQ_DONE_ERROR 5 + +#define SDMA_PKT_Q_INACTIVE (1 << 0) +#define SDMA_PKT_Q_ACTIVE (1 << 1) +#define SDMA_PKT_Q_DEFERRED (1 << 2) + +/* + * Maximum retry attempts to submit a TX request + * before putting the process to sleep. + */ +#define MAX_DEFER_RETRY_COUNT 1 + +static unsigned initial_pkt_count = 8; + +#define SDMA_IOWAIT_TIMEOUT 1000 /* in milliseconds */ + +struct user_sdma_iovec { + struct iovec iov; + /* number of pages in this vector */ + unsigned npages; + /* array of pinned pages for this vector */ + struct page **pages; + /* offset into the virtual address space of the vector at + * which we last left off. */ + u64 offset; +}; + +struct user_sdma_request { + struct sdma_req_info info; + struct hfi1_user_sdma_pkt_q *pq; + struct hfi1_user_sdma_comp_q *cq; + /* This is the original header from user space */ + struct hfi1_pkt_header hdr; + /* + * Pointer to the SDMA engine for this request. + * Since different request could be on different VLs, + * each request will need it's own engine pointer. + */ + struct sdma_engine *sde; + u8 ahg_idx; + u32 ahg[9]; + /* + * KDETH.Offset (Eager) field + * We need to remember the initial value so the headers + * can be updated properly. + */ + u32 koffset; + /* + * KDETH.OFFSET (TID) field + * The offset can cover multiple packets, depending on the + * size of the TID entry. + */ + u32 tidoffset; + /* + * KDETH.OM + * Remember this because the header template always sets it + * to 0. + */ + u8 omfactor; + /* + * pointer to the user's task_struct. We are going to + * get a reference to it so we can process io vectors + * at a later time. + */ + struct task_struct *user_proc; + /* + * pointer to the user's mm_struct. We are going to + * get a reference to it so it doesn't get freed + * since we might not be in process context when we + * are processing the iov's. + * Using this mm_struct, we can get vma based on the + * iov's address (find_vma()). + */ + struct mm_struct *user_mm; + /* + * We copy the iovs for this request (based on + * info.iovcnt). These are only the data vectors + */ + unsigned data_iovs; + /* total length of the data in the request */ + u32 data_len; + /* progress index moving along the iovs array */ + unsigned iov_idx; + struct user_sdma_iovec iovs[MAX_VECTORS_PER_REQ]; + /* number of elements copied to the tids array */ + u16 n_tids; + /* TID array values copied from the tid_iov vector */ + u32 *tids; + u16 tididx; + u32 sent; + u64 seqnum; + spinlock_t list_lock; + struct list_head txps; + unsigned long flags; +}; + +struct user_sdma_txreq { + /* Packet header for the txreq */ + struct hfi1_pkt_header hdr; + struct sdma_txreq txreq; + struct user_sdma_request *req; + struct user_sdma_iovec *iovec1; + struct user_sdma_iovec *iovec2; + u16 flags; + unsigned busycount; + u64 seqnum; +}; + +#define SDMA_DBG(req, fmt, ...) \ + hfi1_cdbg(SDMA, "[%u:%u:%u:%u] " fmt, (req)->pq->dd->unit, \ + (req)->pq->ctxt, (req)->pq->subctxt, (req)->info.comp_idx, \ + ##__VA_ARGS__) +#define SDMA_Q_DBG(pq, fmt, ...) \ + hfi1_cdbg(SDMA, "[%u:%u:%u] " fmt, (pq)->dd->unit, (pq)->ctxt, \ + (pq)->subctxt, ##__VA_ARGS__) + +static int user_sdma_send_pkts(struct user_sdma_request *, unsigned); +static int num_user_pages(const struct iovec *); +static void user_sdma_txreq_cb(struct sdma_txreq *, int, int); +static void user_sdma_free_request(struct user_sdma_request *); +static int pin_vector_pages(struct user_sdma_request *, + struct user_sdma_iovec *); +static void unpin_vector_pages(struct user_sdma_iovec *); +static int check_header_template(struct user_sdma_request *, + struct hfi1_pkt_header *, u32, u32); +static int set_txreq_header(struct user_sdma_request *, + struct user_sdma_txreq *, u32); +static int set_txreq_header_ahg(struct user_sdma_request *, + struct user_sdma_txreq *, u32); +static inline void set_comp_state(struct user_sdma_request *, + enum hfi1_sdma_comp_state, int); +static inline u32 set_pkt_bth_psn(__be32, u8, u32); +static inline u32 get_lrh_len(struct hfi1_pkt_header, u32 len); + +static int defer_packet_queue( + struct sdma_engine *, + struct iowait *, + struct sdma_txreq *, + unsigned seq); +static void activate_packet_queue(struct iowait *, int); + +static inline int iovec_may_free(struct user_sdma_iovec *iovec, + void (*free)(struct user_sdma_iovec *)) +{ + if (ACCESS_ONCE(iovec->offset) == iovec->iov.iov_len) { + free(iovec); + return 1; + } + return 0; +} + +static inline void iovec_set_complete(struct user_sdma_iovec *iovec) +{ + iovec->offset = iovec->iov.iov_len; +} + +static int defer_packet_queue( + struct sdma_engine *sde, + struct iowait *wait, + struct sdma_txreq *txreq, + unsigned seq) +{ + struct hfi1_user_sdma_pkt_q *pq = + container_of(wait, struct hfi1_user_sdma_pkt_q, busy); + struct hfi1_ibdev *dev = &pq->dd->verbs_dev; + struct user_sdma_txreq *tx = + container_of(txreq, struct user_sdma_txreq, txreq); + + if (sdma_progress(sde, seq, txreq)) { + if (tx->busycount++ < MAX_DEFER_RETRY_COUNT) + goto eagain; + } + /* + * We are assuming that if the list is enqueued somewhere, it + * is to the dmawait list since that is the only place where + * it is supposed to be enqueued. + */ + xchg(&pq->state, SDMA_PKT_Q_DEFERRED); + write_seqlock(&dev->iowait_lock); + if (list_empty(&pq->busy.list)) + list_add_tail(&pq->busy.list, &sde->dmawait); + write_sequnlock(&dev->iowait_lock); + return -EBUSY; +eagain: + return -EAGAIN; +} + +static void activate_packet_queue(struct iowait *wait, int reason) +{ + struct hfi1_user_sdma_pkt_q *pq = + container_of(wait, struct hfi1_user_sdma_pkt_q, busy); + xchg(&pq->state, SDMA_PKT_Q_ACTIVE); + wake_up(&wait->wait_dma); +}; + +static void sdma_kmem_cache_ctor(void *obj) +{ + struct user_sdma_txreq *tx = (struct user_sdma_txreq *)obj; + + memset(tx, 0, sizeof(*tx)); +} + +int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp) +{ + int ret = 0; + unsigned memsize; + char buf[64]; + struct hfi1_devdata *dd; + struct hfi1_user_sdma_comp_q *cq; + struct hfi1_user_sdma_pkt_q *pq; + unsigned long flags; + + if (!uctxt || !fp) { + ret = -EBADF; + goto done; + } + + if (!hfi1_sdma_comp_ring_size) { + ret = -EINVAL; + goto done; + } + + dd = uctxt->dd; + + pq = kzalloc(sizeof(*pq), GFP_KERNEL); + if (!pq) { + dd_dev_err(dd, + "[%u:%u] Failed to allocate SDMA request struct\n", + uctxt->ctxt, subctxt_fp(fp)); + goto pq_nomem; + } + memsize = sizeof(*pq->reqs) * hfi1_sdma_comp_ring_size; + pq->reqs = kmalloc(memsize, GFP_KERNEL); + if (!pq->reqs) { + dd_dev_err(dd, + "[%u:%u] Failed to allocate SDMA request queue (%u)\n", + uctxt->ctxt, subctxt_fp(fp), memsize); + goto pq_reqs_nomem; + } + INIT_LIST_HEAD(&pq->list); + pq->dd = dd; + pq->ctxt = uctxt->ctxt; + pq->subctxt = subctxt_fp(fp); + pq->n_max_reqs = hfi1_sdma_comp_ring_size; + pq->state = SDMA_PKT_Q_INACTIVE; + atomic_set(&pq->n_reqs, 0); + + iowait_init(&pq->busy, 0, NULL, defer_packet_queue, + activate_packet_queue); + pq->reqidx = 0; + snprintf(buf, 64, "txreq-kmem-cache-%u-%u-%u", dd->unit, uctxt->ctxt, + subctxt_fp(fp)); + pq->txreq_cache = kmem_cache_create(buf, + sizeof(struct user_sdma_txreq), + L1_CACHE_BYTES, + SLAB_HWCACHE_ALIGN, + sdma_kmem_cache_ctor); + if (!pq->txreq_cache) { + dd_dev_err(dd, "[%u] Failed to allocate TxReq cache\n", + uctxt->ctxt); + goto pq_txreq_nomem; + } + user_sdma_pkt_fp(fp) = pq; + cq = kzalloc(sizeof(*cq), GFP_KERNEL); + if (!cq) { + dd_dev_err(dd, + "[%u:%u] Failed to allocate SDMA completion queue\n", + uctxt->ctxt, subctxt_fp(fp)); + goto cq_nomem; + } + + memsize = ALIGN(sizeof(*cq->comps) * hfi1_sdma_comp_ring_size, + PAGE_SIZE); + cq->comps = vmalloc_user(memsize); + if (!cq->comps) { + dd_dev_err(dd, + "[%u:%u] Failed to allocate SDMA completion queue entries\n", + uctxt->ctxt, subctxt_fp(fp)); + goto cq_comps_nomem; + } + cq->nentries = hfi1_sdma_comp_ring_size; + user_sdma_comp_fp(fp) = cq; + + spin_lock_irqsave(&uctxt->sdma_qlock, flags); + list_add(&pq->list, &uctxt->sdma_queues); + spin_unlock_irqrestore(&uctxt->sdma_qlock, flags); + goto done; + +cq_comps_nomem: + kfree(cq); +cq_nomem: + kmem_cache_destroy(pq->txreq_cache); +pq_txreq_nomem: + kfree(pq->reqs); +pq_reqs_nomem: + kfree(pq); + user_sdma_pkt_fp(fp) = NULL; +pq_nomem: + ret = -ENOMEM; +done: + return ret; +} + +int hfi1_user_sdma_free_queues(struct hfi1_filedata *fd) +{ + struct hfi1_ctxtdata *uctxt = fd->uctxt; + struct hfi1_user_sdma_pkt_q *pq; + unsigned long flags; + + hfi1_cdbg(SDMA, "[%u:%u:%u] Freeing user SDMA queues", uctxt->dd->unit, + uctxt->ctxt, fd->subctxt); + pq = fd->pq; + if (pq) { + u16 i, j; + + spin_lock_irqsave(&uctxt->sdma_qlock, flags); + if (!list_empty(&pq->list)) + list_del_init(&pq->list); + spin_unlock_irqrestore(&uctxt->sdma_qlock, flags); + iowait_sdma_drain(&pq->busy); + if (pq->reqs) { + for (i = 0, j = 0; i < atomic_read(&pq->n_reqs) && + j < pq->n_max_reqs; j++) { + struct user_sdma_request *req = &pq->reqs[j]; + + if (test_bit(SDMA_REQ_IN_USE, &req->flags)) { + set_comp_state(req, ERROR, -ECOMM); + user_sdma_free_request(req); + i++; + } + } + kfree(pq->reqs); + } + if (pq->txreq_cache) + kmem_cache_destroy(pq->txreq_cache); + kfree(pq); + fd->pq = NULL; + } + if (fd->cq) { + if (fd->cq->comps) + vfree(fd->cq->comps); + kfree(fd->cq); + fd->cq = NULL; + } + return 0; +} + +int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec, + unsigned long dim, unsigned long *count) +{ + int ret = 0, i = 0, sent; + struct hfi1_ctxtdata *uctxt = ctxt_fp(fp); + struct hfi1_user_sdma_pkt_q *pq = user_sdma_pkt_fp(fp); + struct hfi1_user_sdma_comp_q *cq = user_sdma_comp_fp(fp); + struct hfi1_devdata *dd = pq->dd; + unsigned long idx = 0; + u8 pcount = initial_pkt_count; + struct sdma_req_info info; + struct user_sdma_request *req; + u8 opcode, sc, vl; + + if (iovec[idx].iov_len < sizeof(info) + sizeof(req->hdr)) { + hfi1_cdbg( + SDMA, + "[%u:%u:%u] First vector not big enough for header %lu/%lu", + dd->unit, uctxt->ctxt, subctxt_fp(fp), + iovec[idx].iov_len, sizeof(info) + sizeof(req->hdr)); + ret = -EINVAL; + goto done; + } + ret = copy_from_user(&info, iovec[idx].iov_base, sizeof(info)); + if (ret) { + hfi1_cdbg(SDMA, "[%u:%u:%u] Failed to copy info QW (%d)", + dd->unit, uctxt->ctxt, subctxt_fp(fp), ret); + ret = -EFAULT; + goto done; + } + trace_hfi1_sdma_user_reqinfo(dd, uctxt->ctxt, subctxt_fp(fp), + (u16 *)&info); + if (cq->comps[info.comp_idx].status == QUEUED) { + hfi1_cdbg(SDMA, "[%u:%u:%u] Entry %u is in QUEUED state", + dd->unit, uctxt->ctxt, subctxt_fp(fp), + info.comp_idx); + ret = -EBADSLT; + goto done; + } + if (!info.fragsize) { + hfi1_cdbg(SDMA, + "[%u:%u:%u:%u] Request does not specify fragsize", + dd->unit, uctxt->ctxt, subctxt_fp(fp), info.comp_idx); + ret = -EINVAL; + goto done; + } + /* + * We've done all the safety checks that we can up to this point, + * "allocate" the request entry. + */ + hfi1_cdbg(SDMA, "[%u:%u:%u] Using req/comp entry %u\n", dd->unit, + uctxt->ctxt, subctxt_fp(fp), info.comp_idx); + req = pq->reqs + info.comp_idx; + memset(req, 0, sizeof(*req)); + /* Mark the request as IN_USE before we start filling it in. */ + set_bit(SDMA_REQ_IN_USE, &req->flags); + req->data_iovs = req_iovcnt(info.ctrl) - 1; + req->pq = pq; + req->cq = cq; + INIT_LIST_HEAD(&req->txps); + spin_lock_init(&req->list_lock); + memcpy(&req->info, &info, sizeof(info)); + + if (req_opcode(info.ctrl) == EXPECTED) + req->data_iovs--; + + if (!info.npkts || req->data_iovs > MAX_VECTORS_PER_REQ) { + SDMA_DBG(req, "Too many vectors (%u/%u)", req->data_iovs, + MAX_VECTORS_PER_REQ); + ret = -EINVAL; + goto done; + } + /* Copy the header from the user buffer */ + ret = copy_from_user(&req->hdr, iovec[idx].iov_base + sizeof(info), + sizeof(req->hdr)); + if (ret) { + SDMA_DBG(req, "Failed to copy header template (%d)", ret); + ret = -EFAULT; + goto free_req; + } + + /* If Static rate control is not enabled, sanitize the header. */ + if (!HFI1_CAP_IS_USET(STATIC_RATE_CTRL)) + req->hdr.pbc[2] = 0; + + /* Validate the opcode. Do not trust packets from user space blindly. */ + opcode = (be32_to_cpu(req->hdr.bth[0]) >> 24) & 0xff; + if ((opcode & USER_OPCODE_CHECK_MASK) != + USER_OPCODE_CHECK_VAL) { + SDMA_DBG(req, "Invalid opcode (%d)", opcode); + ret = -EINVAL; + goto free_req; + } + /* + * Validate the vl. Do not trust packets from user space blindly. + * VL comes from PBC, SC comes from LRH, and the VL needs to + * match the SC look up. + */ + vl = (le16_to_cpu(req->hdr.pbc[0]) >> 12) & 0xF; + sc = (((be16_to_cpu(req->hdr.lrh[0]) >> 12) & 0xF) | + (((le16_to_cpu(req->hdr.pbc[1]) >> 14) & 0x1) << 4)); + if (vl >= dd->pport->vls_operational || + vl != sc_to_vlt(dd, sc)) { + SDMA_DBG(req, "Invalid SC(%u)/VL(%u)", sc, vl); + ret = -EINVAL; + goto free_req; + } + + /* + * Also should check the BTH.lnh. If it says the next header is GRH then + * the RXE parsing will be off and will land in the middle of the KDETH + * or miss it entirely. + */ + if ((be16_to_cpu(req->hdr.lrh[0]) & 0x3) == HFI1_LRH_GRH) { + SDMA_DBG(req, "User tried to pass in a GRH"); + ret = -EINVAL; + goto free_req; + } + + req->koffset = le32_to_cpu(req->hdr.kdeth.swdata[6]); + /* Calculate the initial TID offset based on the values of + KDETH.OFFSET and KDETH.OM that are passed in. */ + req->tidoffset = KDETH_GET(req->hdr.kdeth.ver_tid_offset, OFFSET) * + (KDETH_GET(req->hdr.kdeth.ver_tid_offset, OM) ? + KDETH_OM_LARGE : KDETH_OM_SMALL); + SDMA_DBG(req, "Initial TID offset %u", req->tidoffset); + idx++; + + /* Save all the IO vector structures */ + while (i < req->data_iovs) { + memcpy(&req->iovs[i].iov, iovec + idx++, sizeof(struct iovec)); + req->iovs[i].offset = 0; + req->data_len += req->iovs[i++].iov.iov_len; + } + SDMA_DBG(req, "total data length %u", req->data_len); + + if (pcount > req->info.npkts) + pcount = req->info.npkts; + /* + * Copy any TID info + * User space will provide the TID info only when the + * request type is EXPECTED. This is true even if there is + * only one packet in the request and the header is already + * setup. The reason for the singular TID case is that the + * driver needs to perform safety checks. + */ + if (req_opcode(req->info.ctrl) == EXPECTED) { + u16 ntids = iovec[idx].iov_len / sizeof(*req->tids); + + if (!ntids || ntids > MAX_TID_PAIR_ENTRIES) { + ret = -EINVAL; + goto free_req; + } + req->tids = kcalloc(ntids, sizeof(*req->tids), GFP_KERNEL); + if (!req->tids) { + ret = -ENOMEM; + goto free_req; + } + /* + * We have to copy all of the tids because they may vary + * in size and, therefore, the TID count might not be + * equal to the pkt count. However, there is no way to + * tell at this point. + */ + ret = copy_from_user(req->tids, iovec[idx].iov_base, + ntids * sizeof(*req->tids)); + if (ret) { + SDMA_DBG(req, "Failed to copy %d TIDs (%d)", + ntids, ret); + ret = -EFAULT; + goto free_req; + } + req->n_tids = ntids; + idx++; + } + + /* Have to select the engine */ + req->sde = sdma_select_engine_vl(dd, + (u32)(uctxt->ctxt + subctxt_fp(fp)), + vl); + if (!req->sde || !sdma_running(req->sde)) { + ret = -ECOMM; + goto free_req; + } + + /* We don't need an AHG entry if the request contains only one packet */ + if (req->info.npkts > 1 && HFI1_CAP_IS_USET(SDMA_AHG)) { + int ahg = sdma_ahg_alloc(req->sde); + + if (likely(ahg >= 0)) { + req->ahg_idx = (u8)ahg; + set_bit(SDMA_REQ_HAVE_AHG, &req->flags); + } + } + + set_comp_state(req, QUEUED, 0); + /* Send the first N packets in the request to buy us some time */ + sent = user_sdma_send_pkts(req, pcount); + if (unlikely(sent < 0)) { + if (sent != -EBUSY) { + ret = sent; + goto send_err; + } else + sent = 0; + } + atomic_inc(&pq->n_reqs); + + if (sent < req->info.npkts) { + /* Take the references to the user's task and mm_struct */ + get_task_struct(current); + req->user_proc = current; + + /* + * This is a somewhat blocking send implementation. + * The driver will block the caller until all packets of the + * request have been submitted to the SDMA engine. However, it + * will not wait for send completions. + */ + while (!test_bit(SDMA_REQ_SEND_DONE, &req->flags)) { + ret = user_sdma_send_pkts(req, pcount); + if (ret < 0) { + if (ret != -EBUSY) + goto send_err; + wait_event_interruptible_timeout( + pq->busy.wait_dma, + (pq->state == SDMA_PKT_Q_ACTIVE), + msecs_to_jiffies( + SDMA_IOWAIT_TIMEOUT)); + } + } + + } + ret = 0; + *count += idx; + goto done; +send_err: + set_comp_state(req, ERROR, ret); +free_req: + user_sdma_free_request(req); +done: + return ret; +} + +static inline u32 compute_data_length(struct user_sdma_request *req, + struct user_sdma_txreq *tx) +{ + /* + * Determine the proper size of the packet data. + * The size of the data of the first packet is in the header + * template. However, it includes the header and ICRC, which need + * to be subtracted. + * The size of the remaining packets is the minimum of the frag + * size (MTU) or remaining data in the request. + */ + u32 len; + + if (!req->seqnum) { + len = ((be16_to_cpu(req->hdr.lrh[2]) << 2) - + (sizeof(tx->hdr) - 4)); + } else if (req_opcode(req->info.ctrl) == EXPECTED) { + u32 tidlen = EXP_TID_GET(req->tids[req->tididx], LEN) * + PAGE_SIZE; + /* Get the data length based on the remaining space in the + * TID pair. */ + len = min(tidlen - req->tidoffset, (u32)req->info.fragsize); + /* If we've filled up the TID pair, move to the next one. */ + if (unlikely(!len) && ++req->tididx < req->n_tids && + req->tids[req->tididx]) { + tidlen = EXP_TID_GET(req->tids[req->tididx], + LEN) * PAGE_SIZE; + req->tidoffset = 0; + len = min_t(u32, tidlen, req->info.fragsize); + } + /* Since the TID pairs map entire pages, make sure that we + * are not going to try to send more data that we have + * remaining. */ + len = min(len, req->data_len - req->sent); + } else + len = min(req->data_len - req->sent, (u32)req->info.fragsize); + SDMA_DBG(req, "Data Length = %u", len); + return len; +} + +static inline u32 get_lrh_len(struct hfi1_pkt_header hdr, u32 len) +{ + /* (Size of complete header - size of PBC) + 4B ICRC + data length */ + return ((sizeof(hdr) - sizeof(hdr.pbc)) + 4 + len); +} + +static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts) +{ + int ret = 0; + unsigned npkts = 0; + struct user_sdma_txreq *tx = NULL; + struct hfi1_user_sdma_pkt_q *pq = NULL; + struct user_sdma_iovec *iovec = NULL; + + if (!req->pq) { + ret = -EINVAL; + goto done; + } + + pq = req->pq; + + /* + * Check if we might have sent the entire request already + */ + if (unlikely(req->seqnum == req->info.npkts)) { + if (!list_empty(&req->txps)) + goto dosend; + goto done; + } + + if (!maxpkts || maxpkts > req->info.npkts - req->seqnum) + maxpkts = req->info.npkts - req->seqnum; + + while (npkts < maxpkts) { + u32 datalen = 0, queued = 0, data_sent = 0; + u64 iov_offset = 0; + + /* + * Check whether any of the completions have come back + * with errors. If so, we are not going to process any + * more packets from this request. + */ + if (test_bit(SDMA_REQ_HAS_ERROR, &req->flags)) { + set_bit(SDMA_REQ_DONE_ERROR, &req->flags); + ret = -EFAULT; + goto done; + } + + tx = kmem_cache_alloc(pq->txreq_cache, GFP_KERNEL); + if (!tx) { + ret = -ENOMEM; + goto done; + } + tx->flags = 0; + tx->req = req; + tx->busycount = 0; + tx->iovec1 = NULL; + tx->iovec2 = NULL; + + if (req->seqnum == req->info.npkts - 1) + tx->flags |= USER_SDMA_TXREQ_FLAGS_LAST_PKT; + + /* + * Calculate the payload size - this is min of the fragment + * (MTU) size or the remaining bytes in the request but only + * if we have payload data. + */ + if (req->data_len) { + iovec = &req->iovs[req->iov_idx]; + if (ACCESS_ONCE(iovec->offset) == iovec->iov.iov_len) { + if (++req->iov_idx == req->data_iovs) { + ret = -EFAULT; + goto free_txreq; + } + iovec = &req->iovs[req->iov_idx]; + WARN_ON(iovec->offset); + } + + /* + * This request might include only a header and no user + * data, so pin pages only if there is data and it the + * pages have not been pinned already. + */ + if (unlikely(!iovec->pages && iovec->iov.iov_len)) { + ret = pin_vector_pages(req, iovec); + if (ret) + goto free_tx; + } + + tx->iovec1 = iovec; + datalen = compute_data_length(req, tx); + if (!datalen) { + SDMA_DBG(req, + "Request has data but pkt len is 0"); + ret = -EFAULT; + goto free_tx; + } + } + + if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags)) { + if (!req->seqnum) { + u16 pbclen = le16_to_cpu(req->hdr.pbc[0]); + u32 lrhlen = get_lrh_len(req->hdr, datalen); + /* + * Copy the request header into the tx header + * because the HW needs a cacheline-aligned + * address. + * This copy can be optimized out if the hdr + * member of user_sdma_request were also + * cacheline aligned. + */ + memcpy(&tx->hdr, &req->hdr, sizeof(tx->hdr)); + if (PBC2LRH(pbclen) != lrhlen) { + pbclen = (pbclen & 0xf000) | + LRH2PBC(lrhlen); + tx->hdr.pbc[0] = cpu_to_le16(pbclen); + } + ret = sdma_txinit_ahg(&tx->txreq, + SDMA_TXREQ_F_AHG_COPY, + sizeof(tx->hdr) + datalen, + req->ahg_idx, 0, NULL, 0, + user_sdma_txreq_cb); + if (ret) + goto free_tx; + ret = sdma_txadd_kvaddr(pq->dd, &tx->txreq, + &tx->hdr, + sizeof(tx->hdr)); + if (ret) + goto free_txreq; + } else { + int changes; + + changes = set_txreq_header_ahg(req, tx, + datalen); + if (changes < 0) + goto free_tx; + sdma_txinit_ahg(&tx->txreq, + SDMA_TXREQ_F_USE_AHG, + datalen, req->ahg_idx, changes, + req->ahg, sizeof(req->hdr), + user_sdma_txreq_cb); + } + } else { + ret = sdma_txinit(&tx->txreq, 0, sizeof(req->hdr) + + datalen, user_sdma_txreq_cb); + if (ret) + goto free_tx; + /* + * Modify the header for this packet. This only needs + * to be done if we are not going to use AHG. Otherwise, + * the HW will do it based on the changes we gave it + * during sdma_txinit_ahg(). + */ + ret = set_txreq_header(req, tx, datalen); + if (ret) + goto free_txreq; + } + + /* + * If the request contains any data vectors, add up to + * fragsize bytes to the descriptor. + */ + while (queued < datalen && + (req->sent + data_sent) < req->data_len) { + unsigned long base, offset; + unsigned pageidx, len; + + base = (unsigned long)iovec->iov.iov_base; + offset = ((base + iovec->offset + iov_offset) & + ~PAGE_MASK); + pageidx = (((iovec->offset + iov_offset + + base) - (base & PAGE_MASK)) >> PAGE_SHIFT); + len = offset + req->info.fragsize > PAGE_SIZE ? + PAGE_SIZE - offset : req->info.fragsize; + len = min((datalen - queued), len); + ret = sdma_txadd_page(pq->dd, &tx->txreq, + iovec->pages[pageidx], + offset, len); + if (ret) { + dd_dev_err(pq->dd, + "SDMA txreq add page failed %d\n", + ret); + iovec_set_complete(iovec); + goto free_txreq; + } + iov_offset += len; + queued += len; + data_sent += len; + if (unlikely(queued < datalen && + pageidx == iovec->npages && + req->iov_idx < req->data_iovs - 1)) { + iovec->offset += iov_offset; + iovec = &req->iovs[++req->iov_idx]; + if (!iovec->pages) { + ret = pin_vector_pages(req, iovec); + if (ret) + goto free_txreq; + } + iov_offset = 0; + tx->iovec2 = iovec; + + } + } + /* + * The txreq was submitted successfully so we can update + * the counters. + */ + req->koffset += datalen; + if (req_opcode(req->info.ctrl) == EXPECTED) + req->tidoffset += datalen; + req->sent += data_sent; + if (req->data_len) { + if (tx->iovec1 && !tx->iovec2) + tx->iovec1->offset += iov_offset; + else if (tx->iovec2) + tx->iovec2->offset += iov_offset; + } + /* + * It is important to increment this here as it is used to + * generate the BTH.PSN and, therefore, can't be bulk-updated + * outside of the loop. + */ + tx->seqnum = req->seqnum++; + list_add_tail(&tx->txreq.list, &req->txps); + npkts++; + } +dosend: + ret = sdma_send_txlist(req->sde, &pq->busy, &req->txps); + if (list_empty(&req->txps)) + if (req->seqnum == req->info.npkts) { + set_bit(SDMA_REQ_SEND_DONE, &req->flags); + /* + * The txreq has already been submitted to the HW queue + * so we can free the AHG entry now. Corruption will not + * happen due to the sequential manner in which + * descriptors are processed. + */ + if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags)) + sdma_ahg_free(req->sde, req->ahg_idx); + } + goto done; +free_txreq: + sdma_txclean(pq->dd, &tx->txreq); +free_tx: + kmem_cache_free(pq->txreq_cache, tx); +done: + return ret; +} + +/* + * How many pages in this iovec element? + */ +static inline int num_user_pages(const struct iovec *iov) +{ + const unsigned long addr = (unsigned long) iov->iov_base; + const unsigned long len = iov->iov_len; + const unsigned long spage = addr & PAGE_MASK; + const unsigned long epage = (addr + len - 1) & PAGE_MASK; + + return 1 + ((epage - spage) >> PAGE_SHIFT); +} + +static int pin_vector_pages(struct user_sdma_request *req, + struct user_sdma_iovec *iovec) { + int ret = 0; + unsigned pinned; + + iovec->npages = num_user_pages(&iovec->iov); + iovec->pages = kzalloc(sizeof(*iovec->pages) * + iovec->npages, GFP_KERNEL); + if (!iovec->pages) { + SDMA_DBG(req, "Failed page array alloc"); + ret = -ENOMEM; + goto done; + } + /* If called by the kernel thread, use the user's mm */ + if (current->flags & PF_KTHREAD) + use_mm(req->user_proc->mm); + pinned = get_user_pages_fast( + (unsigned long)iovec->iov.iov_base, + iovec->npages, 0, iovec->pages); + /* If called by the kernel thread, unuse the user's mm */ + if (current->flags & PF_KTHREAD) + unuse_mm(req->user_proc->mm); + if (pinned != iovec->npages) { + SDMA_DBG(req, "Failed to pin pages (%u/%u)", pinned, + iovec->npages); + ret = -EFAULT; + goto pfree; + } + goto done; +pfree: + unpin_vector_pages(iovec); +done: + return ret; +} + +static void unpin_vector_pages(struct user_sdma_iovec *iovec) +{ + unsigned i; + + if (ACCESS_ONCE(iovec->offset) != iovec->iov.iov_len) { + hfi1_cdbg(SDMA, + "the complete vector has not been sent yet %llu %zu", + iovec->offset, iovec->iov.iov_len); + return; + } + for (i = 0; i < iovec->npages; i++) + if (iovec->pages[i]) + put_page(iovec->pages[i]); + kfree(iovec->pages); + iovec->pages = NULL; + iovec->npages = 0; + iovec->offset = 0; +} + +static int check_header_template(struct user_sdma_request *req, + struct hfi1_pkt_header *hdr, u32 lrhlen, + u32 datalen) +{ + /* + * Perform safety checks for any type of packet: + * - transfer size is multiple of 64bytes + * - packet length is multiple of 4bytes + * - entire request length is multiple of 4bytes + * - packet length is not larger than MTU size + * + * These checks are only done for the first packet of the + * transfer since the header is "given" to us by user space. + * For the remainder of the packets we compute the values. + */ + if (req->info.fragsize % PIO_BLOCK_SIZE || + lrhlen & 0x3 || req->data_len & 0x3 || + lrhlen > get_lrh_len(*hdr, req->info.fragsize)) + return -EINVAL; + + if (req_opcode(req->info.ctrl) == EXPECTED) { + /* + * The header is checked only on the first packet. Furthermore, + * we ensure that at least one TID entry is copied when the + * request is submitted. Therefore, we don't have to verify that + * tididx points to something sane. + */ + u32 tidval = req->tids[req->tididx], + tidlen = EXP_TID_GET(tidval, LEN) * PAGE_SIZE, + tididx = EXP_TID_GET(tidval, IDX), + tidctrl = EXP_TID_GET(tidval, CTRL), + tidoff; + __le32 kval = hdr->kdeth.ver_tid_offset; + + tidoff = KDETH_GET(kval, OFFSET) * + (KDETH_GET(req->hdr.kdeth.ver_tid_offset, OM) ? + KDETH_OM_LARGE : KDETH_OM_SMALL); + /* + * Expected receive packets have the following + * additional checks: + * - offset is not larger than the TID size + * - TIDCtrl values match between header and TID array + * - TID indexes match between header and TID array + */ + if ((tidoff + datalen > tidlen) || + KDETH_GET(kval, TIDCTRL) != tidctrl || + KDETH_GET(kval, TID) != tididx) + return -EINVAL; + } + return 0; +} + +/* + * Correctly set the BTH.PSN field based on type of + * transfer - eager packets can just increment the PSN but + * expected packets encode generation and sequence in the + * BTH.PSN field so just incrementing will result in errors. + */ +static inline u32 set_pkt_bth_psn(__be32 bthpsn, u8 expct, u32 frags) +{ + u32 val = be32_to_cpu(bthpsn), + mask = (HFI1_CAP_IS_KSET(EXTENDED_PSN) ? 0x7fffffffull : + 0xffffffull), + psn = val & mask; + if (expct) + psn = (psn & ~BTH_SEQ_MASK) | ((psn + frags) & BTH_SEQ_MASK); + else + psn = psn + frags; + return psn & mask; +} + +static int set_txreq_header(struct user_sdma_request *req, + struct user_sdma_txreq *tx, u32 datalen) +{ + struct hfi1_user_sdma_pkt_q *pq = req->pq; + struct hfi1_pkt_header *hdr = &tx->hdr; + u16 pbclen; + int ret; + u32 tidval = 0, lrhlen = get_lrh_len(*hdr, datalen); + + /* Copy the header template to the request before modification */ + memcpy(hdr, &req->hdr, sizeof(*hdr)); + + /* + * Check if the PBC and LRH length are mismatched. If so + * adjust both in the header. + */ + pbclen = le16_to_cpu(hdr->pbc[0]); + if (PBC2LRH(pbclen) != lrhlen) { + pbclen = (pbclen & 0xf000) | LRH2PBC(lrhlen); + hdr->pbc[0] = cpu_to_le16(pbclen); + hdr->lrh[2] = cpu_to_be16(lrhlen >> 2); + /* + * Third packet + * This is the first packet in the sequence that has + * a "static" size that can be used for the rest of + * the packets (besides the last one). + */ + if (unlikely(req->seqnum == 2)) { + /* + * From this point on the lengths in both the + * PBC and LRH are the same until the last + * packet. + * Adjust the template so we don't have to update + * every packet + */ + req->hdr.pbc[0] = hdr->pbc[0]; + req->hdr.lrh[2] = hdr->lrh[2]; + } + } + /* + * We only have to modify the header if this is not the + * first packet in the request. Otherwise, we use the + * header given to us. + */ + if (unlikely(!req->seqnum)) { + ret = check_header_template(req, hdr, lrhlen, datalen); + if (ret) + return ret; + goto done; + + } + + hdr->bth[2] = cpu_to_be32( + set_pkt_bth_psn(hdr->bth[2], + (req_opcode(req->info.ctrl) == EXPECTED), + req->seqnum)); + + /* Set ACK request on last packet */ + if (unlikely(tx->flags & USER_SDMA_TXREQ_FLAGS_LAST_PKT)) + hdr->bth[2] |= cpu_to_be32(1UL<<31); + + /* Set the new offset */ + hdr->kdeth.swdata[6] = cpu_to_le32(req->koffset); + /* Expected packets have to fill in the new TID information */ + if (req_opcode(req->info.ctrl) == EXPECTED) { + tidval = req->tids[req->tididx]; + /* + * If the offset puts us at the end of the current TID, + * advance everything. + */ + if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) * + PAGE_SIZE)) { + req->tidoffset = 0; + /* Since we don't copy all the TIDs, all at once, + * we have to check again. */ + if (++req->tididx > req->n_tids - 1 || + !req->tids[req->tididx]) { + return -EINVAL; + } + tidval = req->tids[req->tididx]; + } + req->omfactor = EXP_TID_GET(tidval, LEN) * PAGE_SIZE >= + KDETH_OM_MAX_SIZE ? KDETH_OM_LARGE : KDETH_OM_SMALL; + /* Set KDETH.TIDCtrl based on value for this TID. */ + KDETH_SET(hdr->kdeth.ver_tid_offset, TIDCTRL, + EXP_TID_GET(tidval, CTRL)); + /* Set KDETH.TID based on value for this TID */ + KDETH_SET(hdr->kdeth.ver_tid_offset, TID, + EXP_TID_GET(tidval, IDX)); + /* Clear KDETH.SH only on the last packet */ + if (unlikely(tx->flags & USER_SDMA_TXREQ_FLAGS_LAST_PKT)) + KDETH_SET(hdr->kdeth.ver_tid_offset, SH, 0); + /* + * Set the KDETH.OFFSET and KDETH.OM based on size of + * transfer. + */ + SDMA_DBG(req, "TID offset %ubytes %uunits om%u", + req->tidoffset, req->tidoffset / req->omfactor, + !!(req->omfactor - KDETH_OM_SMALL)); + KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET, + req->tidoffset / req->omfactor); + KDETH_SET(hdr->kdeth.ver_tid_offset, OM, + !!(req->omfactor - KDETH_OM_SMALL)); + } +done: + trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt, + req->info.comp_idx, hdr, tidval); + return sdma_txadd_kvaddr(pq->dd, &tx->txreq, hdr, sizeof(*hdr)); +} + +static int set_txreq_header_ahg(struct user_sdma_request *req, + struct user_sdma_txreq *tx, u32 len) +{ + int diff = 0; + struct hfi1_user_sdma_pkt_q *pq = req->pq; + struct hfi1_pkt_header *hdr = &req->hdr; + u16 pbclen = le16_to_cpu(hdr->pbc[0]); + u32 val32, tidval = 0, lrhlen = get_lrh_len(*hdr, len); + + if (PBC2LRH(pbclen) != lrhlen) { + /* PBC.PbcLengthDWs */ + AHG_HEADER_SET(req->ahg, diff, 0, 0, 12, + cpu_to_le16(LRH2PBC(lrhlen))); + /* LRH.PktLen (we need the full 16 bits due to byte swap) */ + AHG_HEADER_SET(req->ahg, diff, 3, 0, 16, + cpu_to_be16(lrhlen >> 2)); + } + + /* + * Do the common updates + */ + /* BTH.PSN and BTH.A */ + val32 = (be32_to_cpu(hdr->bth[2]) + req->seqnum) & + (HFI1_CAP_IS_KSET(EXTENDED_PSN) ? 0x7fffffff : 0xffffff); + if (unlikely(tx->flags & USER_SDMA_TXREQ_FLAGS_LAST_PKT)) + val32 |= 1UL << 31; + AHG_HEADER_SET(req->ahg, diff, 6, 0, 16, cpu_to_be16(val32 >> 16)); + AHG_HEADER_SET(req->ahg, diff, 6, 16, 16, cpu_to_be16(val32 & 0xffff)); + /* KDETH.Offset */ + AHG_HEADER_SET(req->ahg, diff, 15, 0, 16, + cpu_to_le16(req->koffset & 0xffff)); + AHG_HEADER_SET(req->ahg, diff, 15, 16, 16, + cpu_to_le16(req->koffset >> 16)); + if (req_opcode(req->info.ctrl) == EXPECTED) { + __le16 val; + + tidval = req->tids[req->tididx]; + + /* + * If the offset puts us at the end of the current TID, + * advance everything. + */ + if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) * + PAGE_SIZE)) { + req->tidoffset = 0; + /* Since we don't copy all the TIDs, all at once, + * we have to check again. */ + if (++req->tididx > req->n_tids - 1 || + !req->tids[req->tididx]) { + return -EINVAL; + } + tidval = req->tids[req->tididx]; + } + req->omfactor = ((EXP_TID_GET(tidval, LEN) * + PAGE_SIZE) >= + KDETH_OM_MAX_SIZE) ? KDETH_OM_LARGE : + KDETH_OM_SMALL; + /* KDETH.OM and KDETH.OFFSET (TID) */ + AHG_HEADER_SET(req->ahg, diff, 7, 0, 16, + ((!!(req->omfactor - KDETH_OM_SMALL)) << 15 | + ((req->tidoffset / req->omfactor) & 0x7fff))); + /* KDETH.TIDCtrl, KDETH.TID */ + val = cpu_to_le16(((EXP_TID_GET(tidval, CTRL) & 0x3) << 10) | + (EXP_TID_GET(tidval, IDX) & 0x3ff)); + /* Clear KDETH.SH on last packet */ + if (unlikely(tx->flags & USER_SDMA_TXREQ_FLAGS_LAST_PKT)) { + val |= cpu_to_le16(KDETH_GET(hdr->kdeth.ver_tid_offset, + INTR) >> 16); + val &= cpu_to_le16(~(1U << 13)); + AHG_HEADER_SET(req->ahg, diff, 7, 16, 14, val); + } else + AHG_HEADER_SET(req->ahg, diff, 7, 16, 12, val); + } + + trace_hfi1_sdma_user_header_ahg(pq->dd, pq->ctxt, pq->subctxt, + req->info.comp_idx, req->sde->this_idx, + req->ahg_idx, req->ahg, diff, tidval); + return diff; +} + +static void user_sdma_txreq_cb(struct sdma_txreq *txreq, int status, + int drain) +{ + struct user_sdma_txreq *tx = + container_of(txreq, struct user_sdma_txreq, txreq); + struct user_sdma_request *req = tx->req; + struct hfi1_user_sdma_pkt_q *pq = req ? req->pq : NULL; + u64 tx_seqnum; + + if (unlikely(!req || !pq)) + return; + + if (tx->iovec1) + iovec_may_free(tx->iovec1, unpin_vector_pages); + if (tx->iovec2) + iovec_may_free(tx->iovec2, unpin_vector_pages); + + tx_seqnum = tx->seqnum; + kmem_cache_free(pq->txreq_cache, tx); + + if (status != SDMA_TXREQ_S_OK) { + dd_dev_err(pq->dd, "SDMA completion with error %d", status); + set_comp_state(req, ERROR, status); + set_bit(SDMA_REQ_HAS_ERROR, &req->flags); + /* Do not free the request until the sender loop has ack'ed + * the error and we've seen all txreqs. */ + if (tx_seqnum == ACCESS_ONCE(req->seqnum) && + test_bit(SDMA_REQ_DONE_ERROR, &req->flags)) { + atomic_dec(&pq->n_reqs); + user_sdma_free_request(req); + } + } else { + if (tx_seqnum == req->info.npkts - 1) { + /* We've sent and completed all packets in this + * request. Signal completion to the user */ + atomic_dec(&pq->n_reqs); + set_comp_state(req, COMPLETE, 0); + user_sdma_free_request(req); + } + } + if (!atomic_read(&pq->n_reqs)) + xchg(&pq->state, SDMA_PKT_Q_INACTIVE); +} + +static void user_sdma_free_request(struct user_sdma_request *req) +{ + if (!list_empty(&req->txps)) { + struct sdma_txreq *t, *p; + + list_for_each_entry_safe(t, p, &req->txps, list) { + struct user_sdma_txreq *tx = + container_of(t, struct user_sdma_txreq, txreq); + list_del_init(&t->list); + sdma_txclean(req->pq->dd, t); + kmem_cache_free(req->pq->txreq_cache, tx); + } + } + if (req->data_iovs) { + int i; + + for (i = 0; i < req->data_iovs; i++) + if (req->iovs[i].npages && req->iovs[i].pages) + unpin_vector_pages(&req->iovs[i]); + } + if (req->user_proc) + put_task_struct(req->user_proc); + kfree(req->tids); + clear_bit(SDMA_REQ_IN_USE, &req->flags); +} + +static inline void set_comp_state(struct user_sdma_request *req, + enum hfi1_sdma_comp_state state, + int ret) +{ + SDMA_DBG(req, "Setting completion status %u %d", state, ret); + req->cq->comps[req->info.comp_idx].status = state; + if (state == ERROR) + req->cq->comps[req->info.comp_idx].errcode = -ret; + trace_hfi1_sdma_user_completion(req->pq->dd, req->pq->ctxt, + req->pq->subctxt, req->info.comp_idx, + state, ret); +} diff --git a/drivers/staging/rdma/hfi1/user_sdma.h b/drivers/staging/rdma/hfi1/user_sdma.h new file mode 100644 index 000000000000..fa4422553e23 --- /dev/null +++ b/drivers/staging/rdma/hfi1/user_sdma.h @@ -0,0 +1,89 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/device.h> +#include <linux/wait.h> + +#include "common.h" +#include "iowait.h" + +#define EXP_TID_TIDLEN_MASK 0x7FFULL +#define EXP_TID_TIDLEN_SHIFT 0 +#define EXP_TID_TIDCTRL_MASK 0x3ULL +#define EXP_TID_TIDCTRL_SHIFT 20 +#define EXP_TID_TIDIDX_MASK 0x7FFULL +#define EXP_TID_TIDIDX_SHIFT 22 +#define EXP_TID_GET(tid, field) \ + (((tid) >> EXP_TID_TID##field##_SHIFT) & EXP_TID_TID##field##_MASK) + +extern uint extended_psn; + +struct hfi1_user_sdma_pkt_q { + struct list_head list; + unsigned ctxt; + unsigned subctxt; + u16 n_max_reqs; + atomic_t n_reqs; + u16 reqidx; + struct hfi1_devdata *dd; + struct kmem_cache *txreq_cache; + struct user_sdma_request *reqs; + struct iowait busy; + unsigned state; +}; + +struct hfi1_user_sdma_comp_q { + u16 nentries; + struct hfi1_sdma_comp_entry *comps; +}; + +int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *, struct file *); +int hfi1_user_sdma_free_queues(struct hfi1_filedata *); +int hfi1_user_sdma_process_request(struct file *, struct iovec *, unsigned long, + unsigned long *); diff --git a/drivers/staging/rdma/hfi1/verbs.c b/drivers/staging/rdma/hfi1/verbs.c new file mode 100644 index 000000000000..5f4b6617677a --- /dev/null +++ b/drivers/staging/rdma/hfi1/verbs.c @@ -0,0 +1,2142 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <rdma/ib_mad.h> +#include <rdma/ib_user_verbs.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/utsname.h> +#include <linux/rculist.h> +#include <linux/mm.h> +#include <linux/random.h> +#include <linux/vmalloc.h> + +#include "hfi.h" +#include "common.h" +#include "device.h" +#include "trace.h" +#include "qp.h" +#include "sdma.h" + +unsigned int hfi1_lkey_table_size = 16; +module_param_named(lkey_table_size, hfi1_lkey_table_size, uint, + S_IRUGO); +MODULE_PARM_DESC(lkey_table_size, + "LKEY table size in bits (2^n, 1 <= n <= 23)"); + +static unsigned int hfi1_max_pds = 0xFFFF; +module_param_named(max_pds, hfi1_max_pds, uint, S_IRUGO); +MODULE_PARM_DESC(max_pds, + "Maximum number of protection domains to support"); + +static unsigned int hfi1_max_ahs = 0xFFFF; +module_param_named(max_ahs, hfi1_max_ahs, uint, S_IRUGO); +MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support"); + +unsigned int hfi1_max_cqes = 0x2FFFF; +module_param_named(max_cqes, hfi1_max_cqes, uint, S_IRUGO); +MODULE_PARM_DESC(max_cqes, + "Maximum number of completion queue entries to support"); + +unsigned int hfi1_max_cqs = 0x1FFFF; +module_param_named(max_cqs, hfi1_max_cqs, uint, S_IRUGO); +MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support"); + +unsigned int hfi1_max_qp_wrs = 0x3FFF; +module_param_named(max_qp_wrs, hfi1_max_qp_wrs, uint, S_IRUGO); +MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support"); + +unsigned int hfi1_max_qps = 16384; +module_param_named(max_qps, hfi1_max_qps, uint, S_IRUGO); +MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support"); + +unsigned int hfi1_max_sges = 0x60; +module_param_named(max_sges, hfi1_max_sges, uint, S_IRUGO); +MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support"); + +unsigned int hfi1_max_mcast_grps = 16384; +module_param_named(max_mcast_grps, hfi1_max_mcast_grps, uint, S_IRUGO); +MODULE_PARM_DESC(max_mcast_grps, + "Maximum number of multicast groups to support"); + +unsigned int hfi1_max_mcast_qp_attached = 16; +module_param_named(max_mcast_qp_attached, hfi1_max_mcast_qp_attached, + uint, S_IRUGO); +MODULE_PARM_DESC(max_mcast_qp_attached, + "Maximum number of attached QPs to support"); + +unsigned int hfi1_max_srqs = 1024; +module_param_named(max_srqs, hfi1_max_srqs, uint, S_IRUGO); +MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support"); + +unsigned int hfi1_max_srq_sges = 128; +module_param_named(max_srq_sges, hfi1_max_srq_sges, uint, S_IRUGO); +MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support"); + +unsigned int hfi1_max_srq_wrs = 0x1FFFF; +module_param_named(max_srq_wrs, hfi1_max_srq_wrs, uint, S_IRUGO); +MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support"); + +static void verbs_sdma_complete( + struct sdma_txreq *cookie, + int status, + int drained); + +/* + * Note that it is OK to post send work requests in the SQE and ERR + * states; hfi1_do_send() will process them and generate error + * completions as per IB 1.2 C10-96. + */ +const int ib_hfi1_state_ops[IB_QPS_ERR + 1] = { + [IB_QPS_RESET] = 0, + [IB_QPS_INIT] = HFI1_POST_RECV_OK, + [IB_QPS_RTR] = HFI1_POST_RECV_OK | HFI1_PROCESS_RECV_OK, + [IB_QPS_RTS] = HFI1_POST_RECV_OK | HFI1_PROCESS_RECV_OK | + HFI1_POST_SEND_OK | HFI1_PROCESS_SEND_OK | + HFI1_PROCESS_NEXT_SEND_OK, + [IB_QPS_SQD] = HFI1_POST_RECV_OK | HFI1_PROCESS_RECV_OK | + HFI1_POST_SEND_OK | HFI1_PROCESS_SEND_OK, + [IB_QPS_SQE] = HFI1_POST_RECV_OK | HFI1_PROCESS_RECV_OK | + HFI1_POST_SEND_OK | HFI1_FLUSH_SEND, + [IB_QPS_ERR] = HFI1_POST_RECV_OK | HFI1_FLUSH_RECV | + HFI1_POST_SEND_OK | HFI1_FLUSH_SEND, +}; + +struct hfi1_ucontext { + struct ib_ucontext ibucontext; +}; + +static inline struct hfi1_ucontext *to_iucontext(struct ib_ucontext + *ibucontext) +{ + return container_of(ibucontext, struct hfi1_ucontext, ibucontext); +} + +/* + * Translate ib_wr_opcode into ib_wc_opcode. + */ +const enum ib_wc_opcode ib_hfi1_wc_opcode[] = { + [IB_WR_RDMA_WRITE] = IB_WC_RDMA_WRITE, + [IB_WR_RDMA_WRITE_WITH_IMM] = IB_WC_RDMA_WRITE, + [IB_WR_SEND] = IB_WC_SEND, + [IB_WR_SEND_WITH_IMM] = IB_WC_SEND, + [IB_WR_RDMA_READ] = IB_WC_RDMA_READ, + [IB_WR_ATOMIC_CMP_AND_SWP] = IB_WC_COMP_SWAP, + [IB_WR_ATOMIC_FETCH_AND_ADD] = IB_WC_FETCH_ADD +}; + +/* + * Length of header by opcode, 0 --> not supported + */ +const u8 hdr_len_by_opcode[256] = { + /* RC */ + [IB_OPCODE_RC_SEND_FIRST] = 12 + 8, + [IB_OPCODE_RC_SEND_MIDDLE] = 12 + 8, + [IB_OPCODE_RC_SEND_LAST] = 12 + 8, + [IB_OPCODE_RC_SEND_LAST_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_RC_SEND_ONLY] = 12 + 8, + [IB_OPCODE_RC_SEND_ONLY_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_RC_RDMA_WRITE_FIRST] = 12 + 8 + 16, + [IB_OPCODE_RC_RDMA_WRITE_MIDDLE] = 12 + 8, + [IB_OPCODE_RC_RDMA_WRITE_LAST] = 12 + 8, + [IB_OPCODE_RC_RDMA_WRITE_LAST_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_RC_RDMA_WRITE_ONLY] = 12 + 8 + 16, + [IB_OPCODE_RC_RDMA_WRITE_ONLY_WITH_IMMEDIATE] = 12 + 8 + 20, + [IB_OPCODE_RC_RDMA_READ_REQUEST] = 12 + 8 + 16, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST] = 12 + 8 + 4, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE] = 12 + 8, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_LAST] = 12 + 8 + 4, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_ONLY] = 12 + 8 + 4, + [IB_OPCODE_RC_ACKNOWLEDGE] = 12 + 8 + 4, + [IB_OPCODE_RC_ATOMIC_ACKNOWLEDGE] = 12 + 8 + 4, + [IB_OPCODE_RC_COMPARE_SWAP] = 12 + 8 + 28, + [IB_OPCODE_RC_FETCH_ADD] = 12 + 8 + 28, + /* UC */ + [IB_OPCODE_UC_SEND_FIRST] = 12 + 8, + [IB_OPCODE_UC_SEND_MIDDLE] = 12 + 8, + [IB_OPCODE_UC_SEND_LAST] = 12 + 8, + [IB_OPCODE_UC_SEND_LAST_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_UC_SEND_ONLY] = 12 + 8, + [IB_OPCODE_UC_SEND_ONLY_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_UC_RDMA_WRITE_FIRST] = 12 + 8 + 16, + [IB_OPCODE_UC_RDMA_WRITE_MIDDLE] = 12 + 8, + [IB_OPCODE_UC_RDMA_WRITE_LAST] = 12 + 8, + [IB_OPCODE_UC_RDMA_WRITE_LAST_WITH_IMMEDIATE] = 12 + 8 + 4, + [IB_OPCODE_UC_RDMA_WRITE_ONLY] = 12 + 8 + 16, + [IB_OPCODE_UC_RDMA_WRITE_ONLY_WITH_IMMEDIATE] = 12 + 8 + 20, + /* UD */ + [IB_OPCODE_UD_SEND_ONLY] = 12 + 8 + 8, + [IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE] = 12 + 8 + 12 +}; + +static const opcode_handler opcode_handler_tbl[256] = { + /* RC */ + [IB_OPCODE_RC_SEND_FIRST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_SEND_MIDDLE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_SEND_LAST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_SEND_LAST_WITH_IMMEDIATE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_SEND_ONLY] = &hfi1_rc_rcv, + [IB_OPCODE_RC_SEND_ONLY_WITH_IMMEDIATE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_FIRST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_MIDDLE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_LAST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_LAST_WITH_IMMEDIATE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_ONLY] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_WRITE_ONLY_WITH_IMMEDIATE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_READ_REQUEST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_LAST] = &hfi1_rc_rcv, + [IB_OPCODE_RC_RDMA_READ_RESPONSE_ONLY] = &hfi1_rc_rcv, + [IB_OPCODE_RC_ACKNOWLEDGE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_ATOMIC_ACKNOWLEDGE] = &hfi1_rc_rcv, + [IB_OPCODE_RC_COMPARE_SWAP] = &hfi1_rc_rcv, + [IB_OPCODE_RC_FETCH_ADD] = &hfi1_rc_rcv, + /* UC */ + [IB_OPCODE_UC_SEND_FIRST] = &hfi1_uc_rcv, + [IB_OPCODE_UC_SEND_MIDDLE] = &hfi1_uc_rcv, + [IB_OPCODE_UC_SEND_LAST] = &hfi1_uc_rcv, + [IB_OPCODE_UC_SEND_LAST_WITH_IMMEDIATE] = &hfi1_uc_rcv, + [IB_OPCODE_UC_SEND_ONLY] = &hfi1_uc_rcv, + [IB_OPCODE_UC_SEND_ONLY_WITH_IMMEDIATE] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_FIRST] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_MIDDLE] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_LAST] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_LAST_WITH_IMMEDIATE] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_ONLY] = &hfi1_uc_rcv, + [IB_OPCODE_UC_RDMA_WRITE_ONLY_WITH_IMMEDIATE] = &hfi1_uc_rcv, + /* UD */ + [IB_OPCODE_UD_SEND_ONLY] = &hfi1_ud_rcv, + [IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE] = &hfi1_ud_rcv, + /* CNP */ + [IB_OPCODE_CNP] = &hfi1_cnp_rcv +}; + +/* + * System image GUID. + */ +__be64 ib_hfi1_sys_image_guid; + +/** + * hfi1_copy_sge - copy data to SGE memory + * @ss: the SGE state + * @data: the data to copy + * @length: the length of the data + */ +void hfi1_copy_sge( + struct hfi1_sge_state *ss, + void *data, u32 length, + int release) +{ + struct hfi1_sge *sge = &ss->sge; + + while (length) { + u32 len = sge->length; + + if (len > length) + len = length; + if (len > sge->sge_length) + len = sge->sge_length; + WARN_ON_ONCE(len == 0); + memcpy(sge->vaddr, data, len); + sge->vaddr += len; + sge->length -= len; + sge->sge_length -= len; + if (sge->sge_length == 0) { + if (release) + hfi1_put_mr(sge->mr); + if (--ss->num_sge) + *sge = *ss->sg_list++; + } else if (sge->length == 0 && sge->mr->lkey) { + if (++sge->n >= HFI1_SEGSZ) { + if (++sge->m >= sge->mr->mapsz) + break; + sge->n = 0; + } + sge->vaddr = + sge->mr->map[sge->m]->segs[sge->n].vaddr; + sge->length = + sge->mr->map[sge->m]->segs[sge->n].length; + } + data += len; + length -= len; + } +} + +/** + * hfi1_skip_sge - skip over SGE memory + * @ss: the SGE state + * @length: the number of bytes to skip + */ +void hfi1_skip_sge(struct hfi1_sge_state *ss, u32 length, int release) +{ + struct hfi1_sge *sge = &ss->sge; + + while (length) { + u32 len = sge->length; + + if (len > length) + len = length; + if (len > sge->sge_length) + len = sge->sge_length; + WARN_ON_ONCE(len == 0); + sge->vaddr += len; + sge->length -= len; + sge->sge_length -= len; + if (sge->sge_length == 0) { + if (release) + hfi1_put_mr(sge->mr); + if (--ss->num_sge) + *sge = *ss->sg_list++; + } else if (sge->length == 0 && sge->mr->lkey) { + if (++sge->n >= HFI1_SEGSZ) { + if (++sge->m >= sge->mr->mapsz) + break; + sge->n = 0; + } + sge->vaddr = + sge->mr->map[sge->m]->segs[sge->n].vaddr; + sge->length = + sge->mr->map[sge->m]->segs[sge->n].length; + } + length -= len; + } +} + +/** + * post_one_send - post one RC, UC, or UD send work request + * @qp: the QP to post on + * @wr: the work request to send + */ +static int post_one_send(struct hfi1_qp *qp, struct ib_send_wr *wr) +{ + struct hfi1_swqe *wqe; + u32 next; + int i; + int j; + int acc; + struct hfi1_lkey_table *rkt; + struct hfi1_pd *pd; + struct hfi1_devdata *dd = dd_from_ibdev(qp->ibqp.device); + struct hfi1_pportdata *ppd; + struct hfi1_ibport *ibp; + + /* IB spec says that num_sge == 0 is OK. */ + if (unlikely(wr->num_sge > qp->s_max_sge)) + return -EINVAL; + + ppd = &dd->pport[qp->port_num - 1]; + ibp = &ppd->ibport_data; + + /* + * Don't allow RDMA reads or atomic operations on UC or + * undefined operations. + * Make sure buffer is large enough to hold the result for atomics. + */ + if (wr->opcode == IB_WR_FAST_REG_MR) { + return -EINVAL; + } else if (qp->ibqp.qp_type == IB_QPT_UC) { + if ((unsigned) wr->opcode >= IB_WR_RDMA_READ) + return -EINVAL; + } else if (qp->ibqp.qp_type != IB_QPT_RC) { + /* Check IB_QPT_SMI, IB_QPT_GSI, IB_QPT_UD opcode */ + if (wr->opcode != IB_WR_SEND && + wr->opcode != IB_WR_SEND_WITH_IMM) + return -EINVAL; + /* Check UD destination address PD */ + if (qp->ibqp.pd != wr->wr.ud.ah->pd) + return -EINVAL; + } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) + return -EINVAL; + else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP && + (wr->num_sge == 0 || + wr->sg_list[0].length < sizeof(u64) || + wr->sg_list[0].addr & (sizeof(u64) - 1))) + return -EINVAL; + else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic) + return -EINVAL; + + next = qp->s_head + 1; + if (next >= qp->s_size) + next = 0; + if (next == qp->s_last) + return -ENOMEM; + + rkt = &to_idev(qp->ibqp.device)->lk_table; + pd = to_ipd(qp->ibqp.pd); + wqe = get_swqe_ptr(qp, qp->s_head); + wqe->wr = *wr; + wqe->length = 0; + j = 0; + if (wr->num_sge) { + acc = wr->opcode >= IB_WR_RDMA_READ ? + IB_ACCESS_LOCAL_WRITE : 0; + for (i = 0; i < wr->num_sge; i++) { + u32 length = wr->sg_list[i].length; + int ok; + + if (length == 0) + continue; + ok = hfi1_lkey_ok(rkt, pd, &wqe->sg_list[j], + &wr->sg_list[i], acc); + if (!ok) + goto bail_inval_free; + wqe->length += length; + j++; + } + wqe->wr.num_sge = j; + } + if (qp->ibqp.qp_type == IB_QPT_UC || + qp->ibqp.qp_type == IB_QPT_RC) { + if (wqe->length > 0x80000000U) + goto bail_inval_free; + } else { + struct hfi1_ah *ah = to_iah(wr->wr.ud.ah); + + atomic_inc(&ah->refcount); + } + wqe->ssn = qp->s_ssn++; + qp->s_head = next; + + return 0; + +bail_inval_free: + /* release mr holds */ + while (j) { + struct hfi1_sge *sge = &wqe->sg_list[--j]; + + hfi1_put_mr(sge->mr); + } + return -EINVAL; +} + +/** + * post_send - post a send on a QP + * @ibqp: the QP to post the send on + * @wr: the list of work requests to post + * @bad_wr: the first bad WR is put here + * + * This may be called from interrupt context. + */ +static int post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + int err = 0; + int call_send; + unsigned long flags; + unsigned nreq = 0; + + spin_lock_irqsave(&qp->s_lock, flags); + + /* Check that state is OK to post send. */ + if (unlikely(!(ib_hfi1_state_ops[qp->state] & HFI1_POST_SEND_OK))) { + spin_unlock_irqrestore(&qp->s_lock, flags); + return -EINVAL; + } + + /* sq empty and not list -> call send */ + call_send = qp->s_head == qp->s_last && !wr->next; + + for (; wr; wr = wr->next) { + err = post_one_send(qp, wr); + if (unlikely(err)) { + *bad_wr = wr; + goto bail; + } + nreq++; + } +bail: + if (nreq && !call_send) + hfi1_schedule_send(qp); + spin_unlock_irqrestore(&qp->s_lock, flags); + if (nreq && call_send) + hfi1_do_send(&qp->s_iowait.iowork); + return err; +} + +/** + * post_receive - post a receive on a QP + * @ibqp: the QP to post the receive on + * @wr: the WR to post + * @bad_wr: the first bad WR is put here + * + * This may be called from interrupt context. + */ +static int post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + struct hfi1_rwq *wq = qp->r_rq.wq; + unsigned long flags; + int ret; + + /* Check that state is OK to post receive. */ + if (!(ib_hfi1_state_ops[qp->state] & HFI1_POST_RECV_OK) || !wq) { + *bad_wr = wr; + ret = -EINVAL; + goto bail; + } + + for (; wr; wr = wr->next) { + struct hfi1_rwqe *wqe; + u32 next; + int i; + + if ((unsigned) wr->num_sge > qp->r_rq.max_sge) { + *bad_wr = wr; + ret = -EINVAL; + goto bail; + } + + spin_lock_irqsave(&qp->r_rq.lock, flags); + next = wq->head + 1; + if (next >= qp->r_rq.size) + next = 0; + if (next == wq->tail) { + spin_unlock_irqrestore(&qp->r_rq.lock, flags); + *bad_wr = wr; + ret = -ENOMEM; + goto bail; + } + + wqe = get_rwqe_ptr(&qp->r_rq, wq->head); + wqe->wr_id = wr->wr_id; + wqe->num_sge = wr->num_sge; + for (i = 0; i < wr->num_sge; i++) + wqe->sg_list[i] = wr->sg_list[i]; + /* Make sure queue entry is written before the head index. */ + smp_wmb(); + wq->head = next; + spin_unlock_irqrestore(&qp->r_rq.lock, flags); + } + ret = 0; + +bail: + return ret; +} + +/* + * Make sure the QP is ready and able to accept the given opcode. + */ +static inline int qp_ok(int opcode, struct hfi1_packet *packet) +{ + struct hfi1_ibport *ibp; + + if (!(ib_hfi1_state_ops[packet->qp->state] & HFI1_PROCESS_RECV_OK)) + goto dropit; + if (((opcode & OPCODE_QP_MASK) == packet->qp->allowed_ops) || + (opcode == IB_OPCODE_CNP)) + return 1; +dropit: + ibp = &packet->rcd->ppd->ibport_data; + ibp->n_pkt_drops++; + return 0; +} + + +/** + * hfi1_ib_rcv - process an incoming packet + * @packet: data packet information + * + * This is called to process an incoming packet at interrupt level. + * + * Tlen is the length of the header + data + CRC in bytes. + */ +void hfi1_ib_rcv(struct hfi1_packet *packet) +{ + struct hfi1_ctxtdata *rcd = packet->rcd; + struct hfi1_ib_header *hdr = packet->hdr; + u32 tlen = packet->tlen; + struct hfi1_pportdata *ppd = rcd->ppd; + struct hfi1_ibport *ibp = &ppd->ibport_data; + u32 qp_num; + int lnh; + u8 opcode; + u16 lid; + + /* Check for GRH */ + lnh = be16_to_cpu(hdr->lrh[0]) & 3; + if (lnh == HFI1_LRH_BTH) + packet->ohdr = &hdr->u.oth; + else if (lnh == HFI1_LRH_GRH) { + u32 vtf; + + packet->ohdr = &hdr->u.l.oth; + if (hdr->u.l.grh.next_hdr != IB_GRH_NEXT_HDR) + goto drop; + vtf = be32_to_cpu(hdr->u.l.grh.version_tclass_flow); + if ((vtf >> IB_GRH_VERSION_SHIFT) != IB_GRH_VERSION) + goto drop; + packet->rcv_flags |= HFI1_HAS_GRH; + } else + goto drop; + + trace_input_ibhdr(rcd->dd, hdr); + + opcode = (be32_to_cpu(packet->ohdr->bth[0]) >> 24); + inc_opstats(tlen, &rcd->opstats->stats[opcode]); + + /* Get the destination QP number. */ + qp_num = be32_to_cpu(packet->ohdr->bth[1]) & HFI1_QPN_MASK; + lid = be16_to_cpu(hdr->lrh[1]); + if (unlikely((lid >= HFI1_MULTICAST_LID_BASE) && + (lid != HFI1_PERMISSIVE_LID))) { + struct hfi1_mcast *mcast; + struct hfi1_mcast_qp *p; + + if (lnh != HFI1_LRH_GRH) + goto drop; + mcast = hfi1_mcast_find(ibp, &hdr->u.l.grh.dgid); + if (mcast == NULL) + goto drop; + list_for_each_entry_rcu(p, &mcast->qp_list, list) { + packet->qp = p->qp; + spin_lock(&packet->qp->r_lock); + if (likely((qp_ok(opcode, packet)))) + opcode_handler_tbl[opcode](packet); + spin_unlock(&packet->qp->r_lock); + } + /* + * Notify hfi1_multicast_detach() if it is waiting for us + * to finish. + */ + if (atomic_dec_return(&mcast->refcount) <= 1) + wake_up(&mcast->wait); + } else { + rcu_read_lock(); + packet->qp = hfi1_lookup_qpn(ibp, qp_num); + if (!packet->qp) { + rcu_read_unlock(); + goto drop; + } + spin_lock(&packet->qp->r_lock); + if (likely((qp_ok(opcode, packet)))) + opcode_handler_tbl[opcode](packet); + spin_unlock(&packet->qp->r_lock); + rcu_read_unlock(); + } + return; + +drop: + ibp->n_pkt_drops++; +} + +/* + * This is called from a timer to check for QPs + * which need kernel memory in order to send a packet. + */ +static void mem_timer(unsigned long data) +{ + struct hfi1_ibdev *dev = (struct hfi1_ibdev *)data; + struct list_head *list = &dev->memwait; + struct hfi1_qp *qp = NULL; + struct iowait *wait; + unsigned long flags; + + write_seqlock_irqsave(&dev->iowait_lock, flags); + if (!list_empty(list)) { + wait = list_first_entry(list, struct iowait, list); + qp = container_of(wait, struct hfi1_qp, s_iowait); + list_del_init(&qp->s_iowait.list); + /* refcount held until actual wake up */ + if (!list_empty(list)) + mod_timer(&dev->mem_timer, jiffies + 1); + } + write_sequnlock_irqrestore(&dev->iowait_lock, flags); + + if (qp) + hfi1_qp_wakeup(qp, HFI1_S_WAIT_KMEM); +} + +void update_sge(struct hfi1_sge_state *ss, u32 length) +{ + struct hfi1_sge *sge = &ss->sge; + + sge->vaddr += length; + sge->length -= length; + sge->sge_length -= length; + if (sge->sge_length == 0) { + if (--ss->num_sge) + *sge = *ss->sg_list++; + } else if (sge->length == 0 && sge->mr->lkey) { + if (++sge->n >= HFI1_SEGSZ) { + if (++sge->m >= sge->mr->mapsz) + return; + sge->n = 0; + } + sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr; + sge->length = sge->mr->map[sge->m]->segs[sge->n].length; + } +} + +static noinline struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, + struct hfi1_qp *qp) +{ + struct verbs_txreq *tx; + unsigned long flags; + + tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC); + if (!tx) { + spin_lock_irqsave(&qp->s_lock, flags); + write_seqlock(&dev->iowait_lock); + if (ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK && + list_empty(&qp->s_iowait.list)) { + dev->n_txwait++; + qp->s_flags |= HFI1_S_WAIT_TX; + list_add_tail(&qp->s_iowait.list, &dev->txwait); + trace_hfi1_qpsleep(qp, HFI1_S_WAIT_TX); + atomic_inc(&qp->refcount); + } + qp->s_flags &= ~HFI1_S_BUSY; + write_sequnlock(&dev->iowait_lock); + spin_unlock_irqrestore(&qp->s_lock, flags); + tx = ERR_PTR(-EBUSY); + } + return tx; +} + +static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev, + struct hfi1_qp *qp) +{ + struct verbs_txreq *tx; + + tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC); + if (!tx) + /* call slow path to get the lock */ + tx = __get_txreq(dev, qp); + if (tx) + tx->qp = qp; + return tx; +} + +void hfi1_put_txreq(struct verbs_txreq *tx) +{ + struct hfi1_ibdev *dev; + struct hfi1_qp *qp; + unsigned long flags; + unsigned int seq; + + qp = tx->qp; + dev = to_idev(qp->ibqp.device); + + if (tx->mr) { + hfi1_put_mr(tx->mr); + tx->mr = NULL; + } + sdma_txclean(dd_from_dev(dev), &tx->txreq); + + /* Free verbs_txreq and return to slab cache */ + kmem_cache_free(dev->verbs_txreq_cache, tx); + + do { + seq = read_seqbegin(&dev->iowait_lock); + if (!list_empty(&dev->txwait)) { + struct iowait *wait; + + write_seqlock_irqsave(&dev->iowait_lock, flags); + /* Wake up first QP wanting a free struct */ + wait = list_first_entry(&dev->txwait, struct iowait, + list); + qp = container_of(wait, struct hfi1_qp, s_iowait); + list_del_init(&qp->s_iowait.list); + /* refcount held until actual wake up */ + write_sequnlock_irqrestore(&dev->iowait_lock, flags); + hfi1_qp_wakeup(qp, HFI1_S_WAIT_TX); + break; + } + } while (read_seqretry(&dev->iowait_lock, seq)); +} + +/* + * This is called with progress side lock held. + */ +/* New API */ +static void verbs_sdma_complete( + struct sdma_txreq *cookie, + int status, + int drained) +{ + struct verbs_txreq *tx = + container_of(cookie, struct verbs_txreq, txreq); + struct hfi1_qp *qp = tx->qp; + + spin_lock(&qp->s_lock); + if (tx->wqe) + hfi1_send_complete(qp, tx->wqe, IB_WC_SUCCESS); + else if (qp->ibqp.qp_type == IB_QPT_RC) { + struct hfi1_ib_header *hdr; + + hdr = &tx->phdr.hdr; + hfi1_rc_send_complete(qp, hdr); + } + if (drained) { + /* + * This happens when the send engine notes + * a QP in the error state and cannot + * do the flush work until that QP's + * sdma work has finished. + */ + if (qp->s_flags & HFI1_S_WAIT_DMA) { + qp->s_flags &= ~HFI1_S_WAIT_DMA; + hfi1_schedule_send(qp); + } + } + spin_unlock(&qp->s_lock); + + hfi1_put_txreq(tx); +} + +static int wait_kmem(struct hfi1_ibdev *dev, struct hfi1_qp *qp) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&qp->s_lock, flags); + if (ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK) { + write_seqlock(&dev->iowait_lock); + if (list_empty(&qp->s_iowait.list)) { + if (list_empty(&dev->memwait)) + mod_timer(&dev->mem_timer, jiffies + 1); + qp->s_flags |= HFI1_S_WAIT_KMEM; + list_add_tail(&qp->s_iowait.list, &dev->memwait); + trace_hfi1_qpsleep(qp, HFI1_S_WAIT_KMEM); + atomic_inc(&qp->refcount); + } + write_sequnlock(&dev->iowait_lock); + qp->s_flags &= ~HFI1_S_BUSY; + ret = -EBUSY; + } + spin_unlock_irqrestore(&qp->s_lock, flags); + + return ret; +} + +/* + * This routine calls txadds for each sg entry. + * + * Add failures will revert the sge cursor + */ +static int build_verbs_ulp_payload( + struct sdma_engine *sde, + struct hfi1_sge_state *ss, + u32 length, + struct verbs_txreq *tx) +{ + struct hfi1_sge *sg_list = ss->sg_list; + struct hfi1_sge sge = ss->sge; + u8 num_sge = ss->num_sge; + u32 len; + int ret = 0; + + while (length) { + len = ss->sge.length; + if (len > length) + len = length; + if (len > ss->sge.sge_length) + len = ss->sge.sge_length; + WARN_ON_ONCE(len == 0); + ret = sdma_txadd_kvaddr( + sde->dd, + &tx->txreq, + ss->sge.vaddr, + len); + if (ret) + goto bail_txadd; + update_sge(ss, len); + length -= len; + } + return ret; +bail_txadd: + /* unwind cursor */ + ss->sge = sge; + ss->num_sge = num_sge; + ss->sg_list = sg_list; + return ret; +} + +/* + * Build the number of DMA descriptors needed to send length bytes of data. + * + * NOTE: DMA mapping is held in the tx until completed in the ring or + * the tx desc is freed without having been submitted to the ring + * + * This routine insures the following all the helper routine + * calls succeed. + */ +/* New API */ +static int build_verbs_tx_desc( + struct sdma_engine *sde, + struct hfi1_sge_state *ss, + u32 length, + struct verbs_txreq *tx, + struct ahg_ib_header *ahdr, + u64 pbc) +{ + int ret = 0; + struct hfi1_pio_header *phdr; + u16 hdrbytes = tx->hdr_dwords << 2; + + phdr = &tx->phdr; + if (!ahdr->ahgcount) { + ret = sdma_txinit_ahg( + &tx->txreq, + ahdr->tx_flags, + hdrbytes + length, + ahdr->ahgidx, + 0, + NULL, + 0, + verbs_sdma_complete); + if (ret) + goto bail_txadd; + phdr->pbc = cpu_to_le64(pbc); + memcpy(&phdr->hdr, &ahdr->ibh, hdrbytes - sizeof(phdr->pbc)); + /* add the header */ + ret = sdma_txadd_kvaddr( + sde->dd, + &tx->txreq, + &tx->phdr, + tx->hdr_dwords << 2); + if (ret) + goto bail_txadd; + } else { + struct hfi1_other_headers *sohdr = &ahdr->ibh.u.oth; + struct hfi1_other_headers *dohdr = &phdr->hdr.u.oth; + + /* needed in rc_send_complete() */ + phdr->hdr.lrh[0] = ahdr->ibh.lrh[0]; + if ((be16_to_cpu(phdr->hdr.lrh[0]) & 3) == HFI1_LRH_GRH) { + sohdr = &ahdr->ibh.u.l.oth; + dohdr = &phdr->hdr.u.l.oth; + } + /* opcode */ + dohdr->bth[0] = sohdr->bth[0]; + /* PSN/ACK */ + dohdr->bth[2] = sohdr->bth[2]; + ret = sdma_txinit_ahg( + &tx->txreq, + ahdr->tx_flags, + length, + ahdr->ahgidx, + ahdr->ahgcount, + ahdr->ahgdesc, + hdrbytes, + verbs_sdma_complete); + if (ret) + goto bail_txadd; + } + + /* add the ulp payload - if any. ss can be NULL for acks */ + if (ss) + ret = build_verbs_ulp_payload(sde, ss, length, tx); +bail_txadd: + return ret; +} + +int hfi1_verbs_send_dma(struct hfi1_qp *qp, struct ahg_ib_header *ahdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc) +{ + struct hfi1_ibdev *dev = to_idev(qp->ibqp.device); + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + struct verbs_txreq *tx; + struct sdma_txreq *stx; + u64 pbc_flags = 0; + struct sdma_engine *sde; + u8 sc5 = qp->s_sc; + int ret; + + if (!list_empty(&qp->s_iowait.tx_head)) { + stx = list_first_entry( + &qp->s_iowait.tx_head, + struct sdma_txreq, + list); + list_del_init(&stx->list); + tx = container_of(stx, struct verbs_txreq, txreq); + ret = sdma_send_txreq(tx->sde, &qp->s_iowait, stx); + if (unlikely(ret == -ECOMM)) + goto bail_ecomm; + return ret; + } + + tx = get_txreq(dev, qp); + if (IS_ERR(tx)) + goto bail_tx; + + if (!qp->s_hdr->sde) { + tx->sde = sde = qp_to_sdma_engine(qp, sc5); + if (!sde) + goto bail_no_sde; + } else + tx->sde = sde = qp->s_hdr->sde; + + if (likely(pbc == 0)) { + u32 vl = sc_to_vlt(dd_from_ibdev(qp->ibqp.device), sc5); + /* No vl15 here */ + /* set PBC_DC_INFO bit (aka SC[4]) in pbc_flags */ + pbc_flags |= (!!(sc5 & 0x10)) << PBC_DC_INFO_SHIFT; + + pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); + } + tx->wqe = qp->s_wqe; + tx->mr = qp->s_rdma_mr; + if (qp->s_rdma_mr) + qp->s_rdma_mr = NULL; + tx->hdr_dwords = hdrwords + 2; + ret = build_verbs_tx_desc(sde, ss, len, tx, ahdr, pbc); + if (unlikely(ret)) + goto bail_build; + trace_output_ibhdr(dd_from_ibdev(qp->ibqp.device), &ahdr->ibh); + ret = sdma_send_txreq(sde, &qp->s_iowait, &tx->txreq); + if (unlikely(ret == -ECOMM)) + goto bail_ecomm; + return ret; + +bail_no_sde: + hfi1_put_txreq(tx); +bail_ecomm: + /* The current one got "sent" */ + return 0; +bail_build: + /* kmalloc or mapping fail */ + hfi1_put_txreq(tx); + return wait_kmem(dev, qp); +bail_tx: + return PTR_ERR(tx); +} + +/* + * If we are now in the error state, return zero to flush the + * send work request. + */ +static int no_bufs_available(struct hfi1_qp *qp, struct send_context *sc) +{ + struct hfi1_devdata *dd = sc->dd; + struct hfi1_ibdev *dev = &dd->verbs_dev; + unsigned long flags; + int ret = 0; + + /* + * Note that as soon as want_buffer() is called and + * possibly before it returns, sc_piobufavail() + * could be called. Therefore, put QP on the I/O wait list before + * enabling the PIO avail interrupt. + */ + spin_lock_irqsave(&qp->s_lock, flags); + if (ib_hfi1_state_ops[qp->state] & HFI1_PROCESS_RECV_OK) { + write_seqlock(&dev->iowait_lock); + if (list_empty(&qp->s_iowait.list)) { + struct hfi1_ibdev *dev = &dd->verbs_dev; + int was_empty; + + dev->n_piowait++; + qp->s_flags |= HFI1_S_WAIT_PIO; + was_empty = list_empty(&sc->piowait); + list_add_tail(&qp->s_iowait.list, &sc->piowait); + trace_hfi1_qpsleep(qp, HFI1_S_WAIT_PIO); + atomic_inc(&qp->refcount); + /* counting: only call wantpiobuf_intr if first user */ + if (was_empty) + hfi1_sc_wantpiobuf_intr(sc, 1); + } + write_sequnlock(&dev->iowait_lock); + qp->s_flags &= ~HFI1_S_BUSY; + ret = -EBUSY; + } + spin_unlock_irqrestore(&qp->s_lock, flags); + return ret; +} + +struct send_context *qp_to_send_context(struct hfi1_qp *qp, u8 sc5) +{ + struct hfi1_devdata *dd = dd_from_ibdev(qp->ibqp.device); + struct hfi1_pportdata *ppd = dd->pport + (qp->port_num - 1); + u8 vl; + + vl = sc_to_vlt(dd, sc5); + if (vl >= ppd->vls_supported && vl != 15) + return NULL; + return dd->vld[vl].sc; +} + +int hfi1_verbs_send_pio(struct hfi1_qp *qp, struct ahg_ib_header *ahdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc) +{ + struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u32 *hdr = (u32 *)&ahdr->ibh; + u64 pbc_flags = 0; + u32 sc5; + unsigned long flags = 0; + struct send_context *sc; + struct pio_buf *pbuf; + int wc_status = IB_WC_SUCCESS; + + /* vl15 special case taken care of in ud.c */ + sc5 = qp->s_sc; + sc = qp_to_send_context(qp, sc5); + + if (!sc) + return -EINVAL; + if (likely(pbc == 0)) { + u32 vl = sc_to_vlt(dd_from_ibdev(qp->ibqp.device), sc5); + /* set PBC_DC_INFO bit (aka SC[4]) in pbc_flags */ + pbc_flags |= (!!(sc5 & 0x10)) << PBC_DC_INFO_SHIFT; + pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); + } + pbuf = sc_buffer_alloc(sc, plen, NULL, NULL); + if (unlikely(pbuf == NULL)) { + if (ppd->host_link_state != HLS_UP_ACTIVE) { + /* + * If we have filled the PIO buffers to capacity and are + * not in an active state this request is not going to + * go out to so just complete it with an error or else a + * ULP or the core may be stuck waiting. + */ + hfi1_cdbg( + PIO, + "alloc failed. state not active, completing"); + wc_status = IB_WC_GENERAL_ERR; + goto pio_bail; + } else { + /* + * This is a normal occurrence. The PIO buffs are full + * up but we are still happily sending, well we could be + * so lets continue to queue the request. + */ + hfi1_cdbg(PIO, "alloc failed. state active, queuing"); + return no_bufs_available(qp, sc); + } + } + + if (len == 0) { + pio_copy(ppd->dd, pbuf, pbc, hdr, hdrwords); + } else { + if (ss) { + seg_pio_copy_start(pbuf, pbc, hdr, hdrwords*4); + while (len) { + void *addr = ss->sge.vaddr; + u32 slen = ss->sge.length; + + if (slen > len) + slen = len; + update_sge(ss, slen); + seg_pio_copy_mid(pbuf, addr, slen); + len -= slen; + } + seg_pio_copy_end(pbuf); + } + } + + trace_output_ibhdr(dd_from_ibdev(qp->ibqp.device), &ahdr->ibh); + + if (qp->s_rdma_mr) { + hfi1_put_mr(qp->s_rdma_mr); + qp->s_rdma_mr = NULL; + } + +pio_bail: + if (qp->s_wqe) { + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_send_complete(qp, qp->s_wqe, wc_status); + spin_unlock_irqrestore(&qp->s_lock, flags); + } else if (qp->ibqp.qp_type == IB_QPT_RC) { + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_rc_send_complete(qp, &ahdr->ibh); + spin_unlock_irqrestore(&qp->s_lock, flags); + } + return 0; +} +/* + * egress_pkey_matches_entry - return 1 if the pkey matches ent (ent + * being an entry from the ingress partition key table), return 0 + * otherwise. Use the matching criteria for egress partition keys + * specified in the OPAv1 spec., section 9.1l.7. + */ +static inline int egress_pkey_matches_entry(u16 pkey, u16 ent) +{ + u16 mkey = pkey & PKEY_LOW_15_MASK; + u16 ment = ent & PKEY_LOW_15_MASK; + + if (mkey == ment) { + /* + * If pkey[15] is set (full partition member), + * is bit 15 in the corresponding table element + * clear (limited member)? + */ + if (pkey & PKEY_MEMBER_MASK) + return !!(ent & PKEY_MEMBER_MASK); + return 1; + } + return 0; +} + +/* + * egress_pkey_check - return 0 if hdr's pkey matches according to the + * criteria in the OPAv1 spec., section 9.11.7. + */ +static inline int egress_pkey_check(struct hfi1_pportdata *ppd, + struct hfi1_ib_header *hdr, + struct hfi1_qp *qp) +{ + struct hfi1_other_headers *ohdr; + struct hfi1_devdata *dd; + int i = 0; + u16 pkey; + u8 lnh, sc5 = qp->s_sc; + + if (!(ppd->part_enforce & HFI1_PART_ENFORCE_OUT)) + return 0; + + /* locate the pkey within the headers */ + lnh = be16_to_cpu(hdr->lrh[0]) & 3; + if (lnh == HFI1_LRH_GRH) + ohdr = &hdr->u.l.oth; + else + ohdr = &hdr->u.oth; + + pkey = (u16)be32_to_cpu(ohdr->bth[0]); + + /* If SC15, pkey[0:14] must be 0x7fff */ + if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK)) + goto bad; + + + /* Is the pkey = 0x0, or 0x8000? */ + if ((pkey & PKEY_LOW_15_MASK) == 0) + goto bad; + + /* The most likely matching pkey has index qp->s_pkey_index */ + if (unlikely(!egress_pkey_matches_entry(pkey, + ppd->pkeys[qp->s_pkey_index]))) { + /* no match - try the entire table */ + for (; i < MAX_PKEY_VALUES; i++) { + if (egress_pkey_matches_entry(pkey, ppd->pkeys[i])) + break; + } + } + + if (i < MAX_PKEY_VALUES) + return 0; +bad: + incr_cntr64(&ppd->port_xmit_constraint_errors); + dd = ppd->dd; + if (!(dd->err_info_xmit_constraint.status & OPA_EI_STATUS_SMASK)) { + u16 slid = be16_to_cpu(hdr->lrh[3]); + + dd->err_info_xmit_constraint.status |= OPA_EI_STATUS_SMASK; + dd->err_info_xmit_constraint.slid = slid; + dd->err_info_xmit_constraint.pkey = pkey; + } + return 1; +} + +/** + * hfi1_verbs_send - send a packet + * @qp: the QP to send on + * @ahdr: the packet header + * @hdrwords: the number of 32-bit words in the header + * @ss: the SGE to send + * @len: the length of the packet in bytes + * + * Return zero if packet is sent or queued OK. + * Return non-zero and clear qp->s_flags HFI1_S_BUSY otherwise. + */ +int hfi1_verbs_send(struct hfi1_qp *qp, struct ahg_ib_header *ahdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len) +{ + struct hfi1_devdata *dd = dd_from_ibdev(qp->ibqp.device); + u32 plen; + int ret; + int pio = 0; + unsigned long flags = 0; + u32 dwords = (len + 3) >> 2; + + /* + * VL15 packets (IB_QPT_SMI) will always use PIO, so we + * can defer SDMA restart until link goes ACTIVE without + * worrying about just how we got there. + */ + if ((qp->ibqp.qp_type == IB_QPT_SMI) || + !(dd->flags & HFI1_HAS_SEND_DMA)) + pio = 1; + + ret = egress_pkey_check(dd->pport, &ahdr->ibh, qp); + if (unlikely(ret)) { + /* + * The value we are returning here does not get propagated to + * the verbs caller. Thus we need to complete the request with + * error otherwise the caller could be sitting waiting on the + * completion event. Only do this for PIO. SDMA has its own + * mechanism for handling the errors. So for SDMA we can just + * return. + */ + if (pio) { + hfi1_cdbg(PIO, "%s() Failed. Completing with err", + __func__); + spin_lock_irqsave(&qp->s_lock, flags); + hfi1_send_complete(qp, qp->s_wqe, IB_WC_GENERAL_ERR); + spin_unlock_irqrestore(&qp->s_lock, flags); + } + return -EINVAL; + } + + /* + * Calculate the send buffer trigger address. + * The +2 counts for the pbc control qword + */ + plen = hdrwords + dwords + 2; + + if (pio) { + ret = dd->process_pio_send( + qp, ahdr, hdrwords, ss, len, plen, dwords, 0); + } else { +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(dd, "CONFIG SDMA %s:%d %s()\n", + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(dd, "SDMA hdrwords = %u, len = %u\n", hdrwords, len); +#endif + ret = dd->process_dma_send( + qp, ahdr, hdrwords, ss, len, plen, dwords, 0); + } + + return ret; +} + +static int query_device(struct ib_device *ibdev, + struct ib_device_attr *props, + struct ib_udata *uhw) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_ibdev *dev = to_idev(ibdev); + + if (uhw->inlen || uhw->outlen) + return -EINVAL; + memset(props, 0, sizeof(*props)); + + props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR | + IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT | + IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | + IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; + + props->page_size_cap = PAGE_SIZE; + props->vendor_id = + dd->oui1 << 16 | dd->oui2 << 8 | dd->oui3; + props->vendor_part_id = dd->pcidev->device; + props->hw_ver = dd->minrev; + props->sys_image_guid = ib_hfi1_sys_image_guid; + props->max_mr_size = ~0ULL; + props->max_qp = hfi1_max_qps; + props->max_qp_wr = hfi1_max_qp_wrs; + props->max_sge = hfi1_max_sges; + props->max_sge_rd = hfi1_max_sges; + props->max_cq = hfi1_max_cqs; + props->max_ah = hfi1_max_ahs; + props->max_cqe = hfi1_max_cqes; + props->max_mr = dev->lk_table.max; + props->max_fmr = dev->lk_table.max; + props->max_map_per_fmr = 32767; + props->max_pd = hfi1_max_pds; + props->max_qp_rd_atom = HFI1_MAX_RDMA_ATOMIC; + props->max_qp_init_rd_atom = 255; + /* props->max_res_rd_atom */ + props->max_srq = hfi1_max_srqs; + props->max_srq_wr = hfi1_max_srq_wrs; + props->max_srq_sge = hfi1_max_srq_sges; + /* props->local_ca_ack_delay */ + props->atomic_cap = IB_ATOMIC_GLOB; + props->max_pkeys = hfi1_get_npkeys(dd); + props->max_mcast_grp = hfi1_max_mcast_grps; + props->max_mcast_qp_attach = hfi1_max_mcast_qp_attached; + props->max_total_mcast_qp_attach = props->max_mcast_qp_attach * + props->max_mcast_grp; + + return 0; +} + +static inline u16 opa_speed_to_ib(u16 in) +{ + u16 out = 0; + + if (in & OPA_LINK_SPEED_25G) + out |= IB_SPEED_EDR; + if (in & OPA_LINK_SPEED_12_5G) + out |= IB_SPEED_FDR; + + return out; +} + +/* + * Convert a single OPA link width (no multiple flags) to an IB value. + * A zero OPA link width means link down, which means the IB width value + * is a don't care. + */ +static inline u16 opa_width_to_ib(u16 in) +{ + switch (in) { + case OPA_LINK_WIDTH_1X: + /* map 2x and 3x to 1x as they don't exist in IB */ + case OPA_LINK_WIDTH_2X: + case OPA_LINK_WIDTH_3X: + return IB_WIDTH_1X; + default: /* link down or unknown, return our largest width */ + case OPA_LINK_WIDTH_4X: + return IB_WIDTH_4X; + } +} + +static int query_port(struct ib_device *ibdev, u8 port, + struct ib_port_attr *props) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + u16 lid = ppd->lid; + + memset(props, 0, sizeof(*props)); + props->lid = lid ? lid : 0; + props->lmc = ppd->lmc; + props->sm_lid = ibp->sm_lid; + props->sm_sl = ibp->sm_sl; + /* OPA logical states match IB logical states */ + props->state = driver_lstate(ppd); + props->phys_state = hfi1_ibphys_portstate(ppd); + props->port_cap_flags = ibp->port_cap_flags; + props->gid_tbl_len = HFI1_GUIDS_PER_PORT; + props->max_msg_sz = 0x80000000; + props->pkey_tbl_len = hfi1_get_npkeys(dd); + props->bad_pkey_cntr = ibp->pkey_violations; + props->qkey_viol_cntr = ibp->qkey_violations; + props->active_width = (u8)opa_width_to_ib(ppd->link_width_active); + /* see rate_show() in ib core/sysfs.c */ + props->active_speed = (u8)opa_speed_to_ib(ppd->link_speed_active); + props->max_vl_num = ppd->vls_supported; + props->init_type_reply = 0; + + /* Once we are a "first class" citizen and have added the OPA MTUs to + * the core we can advertise the larger MTU enum to the ULPs, for now + * advertise only 4K. + * + * Those applications which are either OPA aware or pass the MTU enum + * from the Path Records to us will get the new 8k MTU. Those that + * attempt to process the MTU enum may fail in various ways. + */ + props->max_mtu = mtu_to_enum((!valid_ib_mtu(hfi1_max_mtu) ? + 4096 : hfi1_max_mtu), IB_MTU_4096); + props->active_mtu = !valid_ib_mtu(ppd->ibmtu) ? props->max_mtu : + mtu_to_enum(ppd->ibmtu, IB_MTU_2048); + props->subnet_timeout = ibp->subnet_timeout; + + return 0; +} + +static int port_immutable(struct ib_device *ibdev, u8 port_num, + struct ib_port_immutable *immutable) +{ + struct ib_port_attr attr; + int err; + + err = query_port(ibdev, port_num, &attr); + if (err) + return err; + + memset(immutable, 0, sizeof(*immutable)); + + immutable->pkey_tbl_len = attr.pkey_tbl_len; + immutable->gid_tbl_len = attr.gid_tbl_len; + immutable->core_cap_flags = RDMA_CORE_PORT_INTEL_OPA; + immutable->max_mad_size = OPA_MGMT_MAD_SIZE; + + return 0; +} + +static int modify_device(struct ib_device *device, + int device_modify_mask, + struct ib_device_modify *device_modify) +{ + struct hfi1_devdata *dd = dd_from_ibdev(device); + unsigned i; + int ret; + + if (device_modify_mask & ~(IB_DEVICE_MODIFY_SYS_IMAGE_GUID | + IB_DEVICE_MODIFY_NODE_DESC)) { + ret = -EOPNOTSUPP; + goto bail; + } + + if (device_modify_mask & IB_DEVICE_MODIFY_NODE_DESC) { + memcpy(device->node_desc, device_modify->node_desc, 64); + for (i = 0; i < dd->num_pports; i++) { + struct hfi1_ibport *ibp = &dd->pport[i].ibport_data; + + hfi1_node_desc_chg(ibp); + } + } + + if (device_modify_mask & IB_DEVICE_MODIFY_SYS_IMAGE_GUID) { + ib_hfi1_sys_image_guid = + cpu_to_be64(device_modify->sys_image_guid); + for (i = 0; i < dd->num_pports; i++) { + struct hfi1_ibport *ibp = &dd->pport[i].ibport_data; + + hfi1_sys_guid_chg(ibp); + } + } + + ret = 0; + +bail: + return ret; +} + +static int modify_port(struct ib_device *ibdev, u8 port, + int port_modify_mask, struct ib_port_modify *props) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + int ret = 0; + + ibp->port_cap_flags |= props->set_port_cap_mask; + ibp->port_cap_flags &= ~props->clr_port_cap_mask; + if (props->set_port_cap_mask || props->clr_port_cap_mask) + hfi1_cap_mask_chg(ibp); + if (port_modify_mask & IB_PORT_SHUTDOWN) { + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_UNKNOWN, 0, + OPA_LINKDOWN_REASON_UNKNOWN); + ret = set_link_state(ppd, HLS_DN_DOWNDEF); + } + if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR) + ibp->qkey_violations = 0; + return ret; +} + +static int query_gid(struct ib_device *ibdev, u8 port, + int index, union ib_gid *gid) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + int ret = 0; + + if (!port || port > dd->num_pports) + ret = -EINVAL; + else { + struct hfi1_ibport *ibp = to_iport(ibdev, port); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + gid->global.subnet_prefix = ibp->gid_prefix; + if (index == 0) + gid->global.interface_id = cpu_to_be64(ppd->guid); + else if (index < HFI1_GUIDS_PER_PORT) + gid->global.interface_id = ibp->guids[index - 1]; + else + ret = -EINVAL; + } + + return ret; +} + +static struct ib_pd *alloc_pd(struct ib_device *ibdev, + struct ib_ucontext *context, + struct ib_udata *udata) +{ + struct hfi1_ibdev *dev = to_idev(ibdev); + struct hfi1_pd *pd; + struct ib_pd *ret; + + /* + * This is actually totally arbitrary. Some correctness tests + * assume there's a maximum number of PDs that can be allocated. + * We don't actually have this limit, but we fail the test if + * we allow allocations of more than we report for this value. + */ + + pd = kmalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) { + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + spin_lock(&dev->n_pds_lock); + if (dev->n_pds_allocated == hfi1_max_pds) { + spin_unlock(&dev->n_pds_lock); + kfree(pd); + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + dev->n_pds_allocated++; + spin_unlock(&dev->n_pds_lock); + + /* ib_alloc_pd() will initialize pd->ibpd. */ + pd->user = udata != NULL; + + ret = &pd->ibpd; + +bail: + return ret; +} + +static int dealloc_pd(struct ib_pd *ibpd) +{ + struct hfi1_pd *pd = to_ipd(ibpd); + struct hfi1_ibdev *dev = to_idev(ibpd->device); + + spin_lock(&dev->n_pds_lock); + dev->n_pds_allocated--; + spin_unlock(&dev->n_pds_lock); + + kfree(pd); + + return 0; +} + +/* + * convert ah port,sl to sc + */ +u8 ah_to_sc(struct ib_device *ibdev, struct ib_ah_attr *ah) +{ + struct hfi1_ibport *ibp = to_iport(ibdev, ah->port_num); + + return ibp->sl_to_sc[ah->sl]; +} + +int hfi1_check_ah(struct ib_device *ibdev, struct ib_ah_attr *ah_attr) +{ + struct hfi1_ibport *ibp; + struct hfi1_pportdata *ppd; + struct hfi1_devdata *dd; + u8 sc5; + + /* A multicast address requires a GRH (see ch. 8.4.1). */ + if (ah_attr->dlid >= HFI1_MULTICAST_LID_BASE && + ah_attr->dlid != HFI1_PERMISSIVE_LID && + !(ah_attr->ah_flags & IB_AH_GRH)) + goto bail; + if ((ah_attr->ah_flags & IB_AH_GRH) && + ah_attr->grh.sgid_index >= HFI1_GUIDS_PER_PORT) + goto bail; + if (ah_attr->dlid == 0) + goto bail; + if (ah_attr->port_num < 1 || + ah_attr->port_num > ibdev->phys_port_cnt) + goto bail; + if (ah_attr->static_rate != IB_RATE_PORT_CURRENT && + ib_rate_to_mbps(ah_attr->static_rate) < 0) + goto bail; + if (ah_attr->sl >= OPA_MAX_SLS) + goto bail; + /* test the mapping for validity */ + ibp = to_iport(ibdev, ah_attr->port_num); + ppd = ppd_from_ibp(ibp); + sc5 = ibp->sl_to_sc[ah_attr->sl]; + dd = dd_from_ppd(ppd); + if (sc_to_vlt(dd, sc5) > num_vls && sc_to_vlt(dd, sc5) != 0xf) + goto bail; + return 0; +bail: + return -EINVAL; +} + +/** + * create_ah - create an address handle + * @pd: the protection domain + * @ah_attr: the attributes of the AH + * + * This may be called from interrupt context. + */ +static struct ib_ah *create_ah(struct ib_pd *pd, + struct ib_ah_attr *ah_attr) +{ + struct hfi1_ah *ah; + struct ib_ah *ret; + struct hfi1_ibdev *dev = to_idev(pd->device); + unsigned long flags; + + if (hfi1_check_ah(pd->device, ah_attr)) { + ret = ERR_PTR(-EINVAL); + goto bail; + } + + ah = kmalloc(sizeof(*ah), GFP_ATOMIC); + if (!ah) { + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + spin_lock_irqsave(&dev->n_ahs_lock, flags); + if (dev->n_ahs_allocated == hfi1_max_ahs) { + spin_unlock_irqrestore(&dev->n_ahs_lock, flags); + kfree(ah); + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + dev->n_ahs_allocated++; + spin_unlock_irqrestore(&dev->n_ahs_lock, flags); + + /* ib_create_ah() will initialize ah->ibah. */ + ah->attr = *ah_attr; + atomic_set(&ah->refcount, 0); + + ret = &ah->ibah; + +bail: + return ret; +} + +struct ib_ah *hfi1_create_qp0_ah(struct hfi1_ibport *ibp, u16 dlid) +{ + struct ib_ah_attr attr; + struct ib_ah *ah = ERR_PTR(-EINVAL); + struct hfi1_qp *qp0; + + memset(&attr, 0, sizeof(attr)); + attr.dlid = dlid; + attr.port_num = ppd_from_ibp(ibp)->port; + rcu_read_lock(); + qp0 = rcu_dereference(ibp->qp[0]); + if (qp0) + ah = ib_create_ah(qp0->ibqp.pd, &attr); + rcu_read_unlock(); + return ah; +} + +/** + * destroy_ah - destroy an address handle + * @ibah: the AH to destroy + * + * This may be called from interrupt context. + */ +static int destroy_ah(struct ib_ah *ibah) +{ + struct hfi1_ibdev *dev = to_idev(ibah->device); + struct hfi1_ah *ah = to_iah(ibah); + unsigned long flags; + + if (atomic_read(&ah->refcount) != 0) + return -EBUSY; + + spin_lock_irqsave(&dev->n_ahs_lock, flags); + dev->n_ahs_allocated--; + spin_unlock_irqrestore(&dev->n_ahs_lock, flags); + + kfree(ah); + + return 0; +} + +static int modify_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr) +{ + struct hfi1_ah *ah = to_iah(ibah); + + if (hfi1_check_ah(ibah->device, ah_attr)) + return -EINVAL; + + ah->attr = *ah_attr; + + return 0; +} + +static int query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr) +{ + struct hfi1_ah *ah = to_iah(ibah); + + *ah_attr = ah->attr; + + return 0; +} + +/** + * hfi1_get_npkeys - return the size of the PKEY table for context 0 + * @dd: the hfi1_ib device + */ +unsigned hfi1_get_npkeys(struct hfi1_devdata *dd) +{ + return ARRAY_SIZE(dd->pport[0].pkeys); +} + +static int query_pkey(struct ib_device *ibdev, u8 port, u16 index, + u16 *pkey) +{ + struct hfi1_devdata *dd = dd_from_ibdev(ibdev); + int ret; + + if (index >= hfi1_get_npkeys(dd)) { + ret = -EINVAL; + goto bail; + } + + *pkey = hfi1_get_pkey(to_iport(ibdev, port), index); + ret = 0; + +bail: + return ret; +} + +/** + * alloc_ucontext - allocate a ucontest + * @ibdev: the infiniband device + * @udata: not used by the driver + */ + +static struct ib_ucontext *alloc_ucontext(struct ib_device *ibdev, + struct ib_udata *udata) +{ + struct hfi1_ucontext *context; + struct ib_ucontext *ret; + + context = kmalloc(sizeof(*context), GFP_KERNEL); + if (!context) { + ret = ERR_PTR(-ENOMEM); + goto bail; + } + + ret = &context->ibucontext; + +bail: + return ret; +} + +static int dealloc_ucontext(struct ib_ucontext *context) +{ + kfree(to_iucontext(context)); + return 0; +} + +static void init_ibport(struct hfi1_pportdata *ppd) +{ + struct hfi1_ibport *ibp = &ppd->ibport_data; + size_t sz = ARRAY_SIZE(ibp->sl_to_sc); + int i; + + for (i = 0; i < sz; i++) { + ibp->sl_to_sc[i] = i; + ibp->sc_to_sl[i] = i; + } + + spin_lock_init(&ibp->lock); + /* Set the prefix to the default value (see ch. 4.1.1) */ + ibp->gid_prefix = IB_DEFAULT_GID_PREFIX; + ibp->sm_lid = 0; + /* Below should only set bits defined in OPA PortInfo.CapabilityMask */ + ibp->port_cap_flags = IB_PORT_AUTO_MIGR_SUP | + IB_PORT_CAP_MASK_NOTICE_SUP; + ibp->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA; + ibp->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA; + ibp->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS; + ibp->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS; + ibp->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT; + + RCU_INIT_POINTER(ibp->qp[0], NULL); + RCU_INIT_POINTER(ibp->qp[1], NULL); +} + +static void verbs_txreq_kmem_cache_ctor(void *obj) +{ + struct verbs_txreq *tx = (struct verbs_txreq *)obj; + + memset(tx, 0, sizeof(*tx)); +} + +/** + * hfi1_register_ib_device - register our device with the infiniband core + * @dd: the device data structure + * Return 0 if successful, errno if unsuccessful. + */ +int hfi1_register_ib_device(struct hfi1_devdata *dd) +{ + struct hfi1_ibdev *dev = &dd->verbs_dev; + struct ib_device *ibdev = &dev->ibdev; + struct hfi1_pportdata *ppd = dd->pport; + unsigned i, lk_tab_size; + int ret; + size_t lcpysz = IB_DEVICE_NAME_MAX; + u16 descq_cnt; + + ret = hfi1_qp_init(dev); + if (ret) + goto err_qp_init; + + + for (i = 0; i < dd->num_pports; i++) + init_ibport(ppd + i); + + /* Only need to initialize non-zero fields. */ + spin_lock_init(&dev->n_pds_lock); + spin_lock_init(&dev->n_ahs_lock); + spin_lock_init(&dev->n_cqs_lock); + spin_lock_init(&dev->n_qps_lock); + spin_lock_init(&dev->n_srqs_lock); + spin_lock_init(&dev->n_mcast_grps_lock); + init_timer(&dev->mem_timer); + dev->mem_timer.function = mem_timer; + dev->mem_timer.data = (unsigned long) dev; + + /* + * The top hfi1_lkey_table_size bits are used to index the + * table. The lower 8 bits can be owned by the user (copied from + * the LKEY). The remaining bits act as a generation number or tag. + */ + spin_lock_init(&dev->lk_table.lock); + dev->lk_table.max = 1 << hfi1_lkey_table_size; + /* ensure generation is at least 4 bits (keys.c) */ + if (hfi1_lkey_table_size > MAX_LKEY_TABLE_BITS) { + dd_dev_warn(dd, "lkey bits %u too large, reduced to %u\n", + hfi1_lkey_table_size, MAX_LKEY_TABLE_BITS); + hfi1_lkey_table_size = MAX_LKEY_TABLE_BITS; + } + lk_tab_size = dev->lk_table.max * sizeof(*dev->lk_table.table); + dev->lk_table.table = (struct hfi1_mregion __rcu **) + vmalloc(lk_tab_size); + if (dev->lk_table.table == NULL) { + ret = -ENOMEM; + goto err_lk; + } + RCU_INIT_POINTER(dev->dma_mr, NULL); + for (i = 0; i < dev->lk_table.max; i++) + RCU_INIT_POINTER(dev->lk_table.table[i], NULL); + INIT_LIST_HEAD(&dev->pending_mmaps); + spin_lock_init(&dev->pending_lock); + seqlock_init(&dev->iowait_lock); + dev->mmap_offset = PAGE_SIZE; + spin_lock_init(&dev->mmap_offset_lock); + INIT_LIST_HEAD(&dev->txwait); + INIT_LIST_HEAD(&dev->memwait); + + descq_cnt = sdma_get_descq_cnt(); + + /* SLAB_HWCACHE_ALIGN for AHG */ + dev->verbs_txreq_cache = kmem_cache_create("hfi1_vtxreq_cache", + sizeof(struct verbs_txreq), + 0, SLAB_HWCACHE_ALIGN, + verbs_txreq_kmem_cache_ctor); + if (!dev->verbs_txreq_cache) { + ret = -ENOMEM; + goto err_verbs_txreq; + } + + /* + * The system image GUID is supposed to be the same for all + * HFIs in a single system but since there can be other + * device types in the system, we can't be sure this is unique. + */ + if (!ib_hfi1_sys_image_guid) + ib_hfi1_sys_image_guid = cpu_to_be64(ppd->guid); + lcpysz = strlcpy(ibdev->name, class_name(), lcpysz); + strlcpy(ibdev->name + lcpysz, "_%d", IB_DEVICE_NAME_MAX - lcpysz); + ibdev->owner = THIS_MODULE; + ibdev->node_guid = cpu_to_be64(ppd->guid); + ibdev->uverbs_abi_ver = HFI1_UVERBS_ABI_VERSION; + ibdev->uverbs_cmd_mask = + (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | + (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | + (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | + (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_CREATE_AH) | + (1ull << IB_USER_VERBS_CMD_MODIFY_AH) | + (1ull << IB_USER_VERBS_CMD_QUERY_AH) | + (1ull << IB_USER_VERBS_CMD_DESTROY_AH) | + (1ull << IB_USER_VERBS_CMD_REG_MR) | + (1ull << IB_USER_VERBS_CMD_DEREG_MR) | + (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | + (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | + (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | + (1ull << IB_USER_VERBS_CMD_POLL_CQ) | + (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) | + (1ull << IB_USER_VERBS_CMD_CREATE_QP) | + (1ull << IB_USER_VERBS_CMD_QUERY_QP) | + (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | + (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | + (1ull << IB_USER_VERBS_CMD_POST_SEND) | + (1ull << IB_USER_VERBS_CMD_POST_RECV) | + (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | + (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | + (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) | + (1ull << IB_USER_VERBS_CMD_POST_SRQ_RECV); + ibdev->node_type = RDMA_NODE_IB_CA; + ibdev->phys_port_cnt = dd->num_pports; + ibdev->num_comp_vectors = 1; + ibdev->dma_device = &dd->pcidev->dev; + ibdev->query_device = query_device; + ibdev->modify_device = modify_device; + ibdev->query_port = query_port; + ibdev->modify_port = modify_port; + ibdev->query_pkey = query_pkey; + ibdev->query_gid = query_gid; + ibdev->alloc_ucontext = alloc_ucontext; + ibdev->dealloc_ucontext = dealloc_ucontext; + ibdev->alloc_pd = alloc_pd; + ibdev->dealloc_pd = dealloc_pd; + ibdev->create_ah = create_ah; + ibdev->destroy_ah = destroy_ah; + ibdev->modify_ah = modify_ah; + ibdev->query_ah = query_ah; + ibdev->create_srq = hfi1_create_srq; + ibdev->modify_srq = hfi1_modify_srq; + ibdev->query_srq = hfi1_query_srq; + ibdev->destroy_srq = hfi1_destroy_srq; + ibdev->create_qp = hfi1_create_qp; + ibdev->modify_qp = hfi1_modify_qp; + ibdev->query_qp = hfi1_query_qp; + ibdev->destroy_qp = hfi1_destroy_qp; + ibdev->post_send = post_send; + ibdev->post_recv = post_receive; + ibdev->post_srq_recv = hfi1_post_srq_receive; + ibdev->create_cq = hfi1_create_cq; + ibdev->destroy_cq = hfi1_destroy_cq; + ibdev->resize_cq = hfi1_resize_cq; + ibdev->poll_cq = hfi1_poll_cq; + ibdev->req_notify_cq = hfi1_req_notify_cq; + ibdev->get_dma_mr = hfi1_get_dma_mr; + ibdev->reg_phys_mr = hfi1_reg_phys_mr; + ibdev->reg_user_mr = hfi1_reg_user_mr; + ibdev->dereg_mr = hfi1_dereg_mr; + ibdev->alloc_fast_reg_page_list = hfi1_alloc_fast_reg_page_list; + ibdev->free_fast_reg_page_list = hfi1_free_fast_reg_page_list; + ibdev->alloc_fmr = hfi1_alloc_fmr; + ibdev->map_phys_fmr = hfi1_map_phys_fmr; + ibdev->unmap_fmr = hfi1_unmap_fmr; + ibdev->dealloc_fmr = hfi1_dealloc_fmr; + ibdev->attach_mcast = hfi1_multicast_attach; + ibdev->detach_mcast = hfi1_multicast_detach; + ibdev->process_mad = hfi1_process_mad; + ibdev->mmap = hfi1_mmap; + ibdev->dma_ops = &hfi1_dma_mapping_ops; + ibdev->get_port_immutable = port_immutable; + + strncpy(ibdev->node_desc, init_utsname()->nodename, + sizeof(ibdev->node_desc)); + + ret = ib_register_device(ibdev, hfi1_create_port_files); + if (ret) + goto err_reg; + + ret = hfi1_create_agents(dev); + if (ret) + goto err_agents; + + ret = hfi1_verbs_register_sysfs(dd); + if (ret) + goto err_class; + + goto bail; + +err_class: + hfi1_free_agents(dev); +err_agents: + ib_unregister_device(ibdev); +err_reg: +err_verbs_txreq: + kmem_cache_destroy(dev->verbs_txreq_cache); + vfree(dev->lk_table.table); +err_lk: + hfi1_qp_exit(dev); +err_qp_init: + dd_dev_err(dd, "cannot register verbs: %d!\n", -ret); +bail: + return ret; +} + +void hfi1_unregister_ib_device(struct hfi1_devdata *dd) +{ + struct hfi1_ibdev *dev = &dd->verbs_dev; + struct ib_device *ibdev = &dev->ibdev; + + hfi1_verbs_unregister_sysfs(dd); + + hfi1_free_agents(dev); + + ib_unregister_device(ibdev); + + if (!list_empty(&dev->txwait)) + dd_dev_err(dd, "txwait list not empty!\n"); + if (!list_empty(&dev->memwait)) + dd_dev_err(dd, "memwait list not empty!\n"); + if (dev->dma_mr) + dd_dev_err(dd, "DMA MR not NULL!\n"); + + hfi1_qp_exit(dev); + del_timer_sync(&dev->mem_timer); + kmem_cache_destroy(dev->verbs_txreq_cache); + vfree(dev->lk_table.table); +} + +/* + * This must be called with s_lock held. + */ +void hfi1_schedule_send(struct hfi1_qp *qp) +{ + if (hfi1_send_ok(qp)) { + struct hfi1_ibport *ibp = + to_iport(qp->ibqp.device, qp->port_num); + struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); + + iowait_schedule(&qp->s_iowait, ppd->hfi1_wq); + } +} + +void hfi1_cnp_rcv(struct hfi1_packet *packet) +{ + struct hfi1_ibport *ibp = &packet->rcd->ppd->ibport_data; + + if (packet->qp->ibqp.qp_type == IB_QPT_UC) + hfi1_uc_rcv(packet); + else if (packet->qp->ibqp.qp_type == IB_QPT_UD) + hfi1_ud_rcv(packet); + else + ibp->n_pkt_drops++; +} diff --git a/drivers/staging/rdma/hfi1/verbs.h b/drivers/staging/rdma/hfi1/verbs.h new file mode 100644 index 000000000000..812536194190 --- /dev/null +++ b/drivers/staging/rdma/hfi1/verbs.h @@ -0,0 +1,1149 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef HFI1_VERBS_H +#define HFI1_VERBS_H + +#include <linux/types.h> +#include <linux/seqlock.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/kref.h> +#include <linux/workqueue.h> +#include <linux/kthread.h> +#include <linux/completion.h> +#include <rdma/ib_pack.h> +#include <rdma/ib_user_verbs.h> +#include <rdma/ib_mad.h> + +struct hfi1_ctxtdata; +struct hfi1_pportdata; +struct hfi1_devdata; +struct hfi1_packet; + +#include "iowait.h" + +#define HFI1_MAX_RDMA_ATOMIC 16 +#define HFI1_GUIDS_PER_PORT 5 + +/* + * Increment this value if any changes that break userspace ABI + * compatibility are made. + */ +#define HFI1_UVERBS_ABI_VERSION 2 + +/* + * Define an ib_cq_notify value that is not valid so we know when CQ + * notifications are armed. + */ +#define IB_CQ_NONE (IB_CQ_NEXT_COMP + 1) + +#define IB_SEQ_NAK (3 << 29) + +/* AETH NAK opcode values */ +#define IB_RNR_NAK 0x20 +#define IB_NAK_PSN_ERROR 0x60 +#define IB_NAK_INVALID_REQUEST 0x61 +#define IB_NAK_REMOTE_ACCESS_ERROR 0x62 +#define IB_NAK_REMOTE_OPERATIONAL_ERROR 0x63 +#define IB_NAK_INVALID_RD_REQUEST 0x64 + +/* Flags for checking QP state (see ib_hfi1_state_ops[]) */ +#define HFI1_POST_SEND_OK 0x01 +#define HFI1_POST_RECV_OK 0x02 +#define HFI1_PROCESS_RECV_OK 0x04 +#define HFI1_PROCESS_SEND_OK 0x08 +#define HFI1_PROCESS_NEXT_SEND_OK 0x10 +#define HFI1_FLUSH_SEND 0x20 +#define HFI1_FLUSH_RECV 0x40 +#define HFI1_PROCESS_OR_FLUSH_SEND \ + (HFI1_PROCESS_SEND_OK | HFI1_FLUSH_SEND) + +/* IB Performance Manager status values */ +#define IB_PMA_SAMPLE_STATUS_DONE 0x00 +#define IB_PMA_SAMPLE_STATUS_STARTED 0x01 +#define IB_PMA_SAMPLE_STATUS_RUNNING 0x02 + +/* Mandatory IB performance counter select values. */ +#define IB_PMA_PORT_XMIT_DATA cpu_to_be16(0x0001) +#define IB_PMA_PORT_RCV_DATA cpu_to_be16(0x0002) +#define IB_PMA_PORT_XMIT_PKTS cpu_to_be16(0x0003) +#define IB_PMA_PORT_RCV_PKTS cpu_to_be16(0x0004) +#define IB_PMA_PORT_XMIT_WAIT cpu_to_be16(0x0005) + +#define HFI1_VENDOR_IPG cpu_to_be16(0xFFA0) + +#define IB_BTH_REQ_ACK (1 << 31) +#define IB_BTH_SOLICITED (1 << 23) +#define IB_BTH_MIG_REQ (1 << 22) + +#define IB_GRH_VERSION 6 +#define IB_GRH_VERSION_MASK 0xF +#define IB_GRH_VERSION_SHIFT 28 +#define IB_GRH_TCLASS_MASK 0xFF +#define IB_GRH_TCLASS_SHIFT 20 +#define IB_GRH_FLOW_MASK 0xFFFFF +#define IB_GRH_FLOW_SHIFT 0 +#define IB_GRH_NEXT_HDR 0x1B + +#define IB_DEFAULT_GID_PREFIX cpu_to_be64(0xfe80000000000000ULL) + +/* flags passed by hfi1_ib_rcv() */ +enum { + HFI1_HAS_GRH = (1 << 0), +}; + +struct ib_reth { + __be64 vaddr; + __be32 rkey; + __be32 length; +} __packed; + +struct ib_atomic_eth { + __be32 vaddr[2]; /* unaligned so access as 2 32-bit words */ + __be32 rkey; + __be64 swap_data; + __be64 compare_data; +} __packed; + +union ib_ehdrs { + struct { + __be32 deth[2]; + __be32 imm_data; + } ud; + struct { + struct ib_reth reth; + __be32 imm_data; + } rc; + struct { + __be32 aeth; + __be32 atomic_ack_eth[2]; + } at; + __be32 imm_data; + __be32 aeth; + struct ib_atomic_eth atomic_eth; +} __packed; + +struct hfi1_other_headers { + __be32 bth[3]; + union ib_ehdrs u; +} __packed; + +/* + * Note that UD packets with a GRH header are 8+40+12+8 = 68 bytes + * long (72 w/ imm_data). Only the first 56 bytes of the IB header + * will be in the eager header buffer. The remaining 12 or 16 bytes + * are in the data buffer. + */ +struct hfi1_ib_header { + __be16 lrh[4]; + union { + struct { + struct ib_grh grh; + struct hfi1_other_headers oth; + } l; + struct hfi1_other_headers oth; + } u; +} __packed; + +struct ahg_ib_header { + struct sdma_engine *sde; + u32 ahgdesc[2]; + u16 tx_flags; + u8 ahgcount; + u8 ahgidx; + struct hfi1_ib_header ibh; +}; + +struct hfi1_pio_header { + __le64 pbc; + struct hfi1_ib_header hdr; +} __packed; + +/* + * used for force cacheline alignment for AHG + */ +struct tx_pio_header { + struct hfi1_pio_header phdr; +} ____cacheline_aligned; + +/* + * There is one struct hfi1_mcast for each multicast GID. + * All attached QPs are then stored as a list of + * struct hfi1_mcast_qp. + */ +struct hfi1_mcast_qp { + struct list_head list; + struct hfi1_qp *qp; +}; + +struct hfi1_mcast { + struct rb_node rb_node; + union ib_gid mgid; + struct list_head qp_list; + wait_queue_head_t wait; + atomic_t refcount; + int n_attached; +}; + +/* Protection domain */ +struct hfi1_pd { + struct ib_pd ibpd; + int user; /* non-zero if created from user space */ +}; + +/* Address Handle */ +struct hfi1_ah { + struct ib_ah ibah; + struct ib_ah_attr attr; + atomic_t refcount; +}; + +/* + * This structure is used by hfi1_mmap() to validate an offset + * when an mmap() request is made. The vm_area_struct then uses + * this as its vm_private_data. + */ +struct hfi1_mmap_info { + struct list_head pending_mmaps; + struct ib_ucontext *context; + void *obj; + __u64 offset; + struct kref ref; + unsigned size; +}; + +/* + * This structure is used to contain the head pointer, tail pointer, + * and completion queue entries as a single memory allocation so + * it can be mmap'ed into user space. + */ +struct hfi1_cq_wc { + u32 head; /* index of next entry to fill */ + u32 tail; /* index of next ib_poll_cq() entry */ + union { + /* these are actually size ibcq.cqe + 1 */ + struct ib_uverbs_wc uqueue[0]; + struct ib_wc kqueue[0]; + }; +}; + +/* + * The completion queue structure. + */ +struct hfi1_cq { + struct ib_cq ibcq; + struct kthread_work comptask; + struct hfi1_devdata *dd; + spinlock_t lock; /* protect changes in this struct */ + u8 notify; + u8 triggered; + struct hfi1_cq_wc *queue; + struct hfi1_mmap_info *ip; +}; + +/* + * A segment is a linear region of low physical memory. + * Used by the verbs layer. + */ +struct hfi1_seg { + void *vaddr; + size_t length; +}; + +/* The number of hfi1_segs that fit in a page. */ +#define HFI1_SEGSZ (PAGE_SIZE / sizeof(struct hfi1_seg)) + +struct hfi1_segarray { + struct hfi1_seg segs[HFI1_SEGSZ]; +}; + +struct hfi1_mregion { + struct ib_pd *pd; /* shares refcnt of ibmr.pd */ + u64 user_base; /* User's address for this region */ + u64 iova; /* IB start address of this region */ + size_t length; + u32 lkey; + u32 offset; /* offset (bytes) to start of region */ + int access_flags; + u32 max_segs; /* number of hfi1_segs in all the arrays */ + u32 mapsz; /* size of the map array */ + u8 page_shift; /* 0 - non unform/non powerof2 sizes */ + u8 lkey_published; /* in global table */ + struct completion comp; /* complete when refcount goes to zero */ + atomic_t refcount; + struct hfi1_segarray *map[0]; /* the segments */ +}; + +/* + * These keep track of the copy progress within a memory region. + * Used by the verbs layer. + */ +struct hfi1_sge { + struct hfi1_mregion *mr; + void *vaddr; /* kernel virtual address of segment */ + u32 sge_length; /* length of the SGE */ + u32 length; /* remaining length of the segment */ + u16 m; /* current index: mr->map[m] */ + u16 n; /* current index: mr->map[m]->segs[n] */ +}; + +/* Memory region */ +struct hfi1_mr { + struct ib_mr ibmr; + struct ib_umem *umem; + struct hfi1_mregion mr; /* must be last */ +}; + +/* + * Send work request queue entry. + * The size of the sg_list is determined when the QP is created and stored + * in qp->s_max_sge. + */ +struct hfi1_swqe { + struct ib_send_wr wr; /* don't use wr.sg_list */ + u32 psn; /* first packet sequence number */ + u32 lpsn; /* last packet sequence number */ + u32 ssn; /* send sequence number */ + u32 length; /* total length of data in sg_list */ + struct hfi1_sge sg_list[0]; +}; + +/* + * Receive work request queue entry. + * The size of the sg_list is determined when the QP (or SRQ) is created + * and stored in qp->r_rq.max_sge (or srq->rq.max_sge). + */ +struct hfi1_rwqe { + u64 wr_id; + u8 num_sge; + struct ib_sge sg_list[0]; +}; + +/* + * This structure is used to contain the head pointer, tail pointer, + * and receive work queue entries as a single memory allocation so + * it can be mmap'ed into user space. + * Note that the wq array elements are variable size so you can't + * just index into the array to get the N'th element; + * use get_rwqe_ptr() instead. + */ +struct hfi1_rwq { + u32 head; /* new work requests posted to the head */ + u32 tail; /* receives pull requests from here. */ + struct hfi1_rwqe wq[0]; +}; + +struct hfi1_rq { + struct hfi1_rwq *wq; + u32 size; /* size of RWQE array */ + u8 max_sge; + /* protect changes in this struct */ + spinlock_t lock ____cacheline_aligned_in_smp; +}; + +struct hfi1_srq { + struct ib_srq ibsrq; + struct hfi1_rq rq; + struct hfi1_mmap_info *ip; + /* send signal when number of RWQEs < limit */ + u32 limit; +}; + +struct hfi1_sge_state { + struct hfi1_sge *sg_list; /* next SGE to be used if any */ + struct hfi1_sge sge; /* progress state for the current SGE */ + u32 total_len; + u8 num_sge; +}; + +/* + * This structure holds the information that the send tasklet needs + * to send a RDMA read response or atomic operation. + */ +struct hfi1_ack_entry { + u8 opcode; + u8 sent; + u32 psn; + u32 lpsn; + union { + struct hfi1_sge rdma_sge; + u64 atomic_data; + }; +}; + +/* + * Variables prefixed with s_ are for the requester (sender). + * Variables prefixed with r_ are for the responder (receiver). + * Variables prefixed with ack_ are for responder replies. + * + * Common variables are protected by both r_rq.lock and s_lock in that order + * which only happens in modify_qp() or changing the QP 'state'. + */ +struct hfi1_qp { + struct ib_qp ibqp; + /* read mostly fields above and below */ + struct ib_ah_attr remote_ah_attr; + struct ib_ah_attr alt_ah_attr; + struct hfi1_qp __rcu *next; /* link list for QPN hash table */ + struct hfi1_swqe *s_wq; /* send work queue */ + struct hfi1_mmap_info *ip; + struct ahg_ib_header *s_hdr; /* next packet header to send */ + u8 s_sc; /* SC[0..4] for next packet */ + unsigned long timeout_jiffies; /* computed from timeout */ + + enum ib_mtu path_mtu; + int srate_mbps; /* s_srate (below) converted to Mbit/s */ + u32 remote_qpn; + u32 pmtu; /* decoded from path_mtu */ + u32 qkey; /* QKEY for this QP (for UD or RD) */ + u32 s_size; /* send work queue size */ + u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */ + u32 s_ahgpsn; /* set to the psn in the copy of the header */ + + u8 state; /* QP state */ + u8 allowed_ops; /* high order bits of allowed opcodes */ + u8 qp_access_flags; + u8 alt_timeout; /* Alternate path timeout for this QP */ + u8 timeout; /* Timeout for this QP */ + u8 s_srate; + u8 s_mig_state; + u8 port_num; + u8 s_pkey_index; /* PKEY index to use */ + u8 s_alt_pkey_index; /* Alternate path PKEY index to use */ + u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */ + u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */ + u8 s_retry_cnt; /* number of times to retry */ + u8 s_rnr_retry_cnt; + u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */ + u8 s_max_sge; /* size of s_wq->sg_list */ + u8 s_draining; + + /* start of read/write fields */ + atomic_t refcount ____cacheline_aligned_in_smp; + wait_queue_head_t wait; + + + struct hfi1_ack_entry s_ack_queue[HFI1_MAX_RDMA_ATOMIC + 1] + ____cacheline_aligned_in_smp; + struct hfi1_sge_state s_rdma_read_sge; + + spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */ + unsigned long r_aflags; + u64 r_wr_id; /* ID for current receive WQE */ + u32 r_ack_psn; /* PSN for next ACK or atomic ACK */ + u32 r_len; /* total length of r_sge */ + u32 r_rcv_len; /* receive data len processed */ + u32 r_psn; /* expected rcv packet sequence number */ + u32 r_msn; /* message sequence number */ + + u8 r_state; /* opcode of last packet received */ + u8 r_flags; + u8 r_head_ack_queue; /* index into s_ack_queue[] */ + + struct list_head rspwait; /* link for waiting to respond */ + + struct hfi1_sge_state r_sge; /* current receive data */ + struct hfi1_rq r_rq; /* receive work queue */ + + spinlock_t s_lock ____cacheline_aligned_in_smp; + struct hfi1_sge_state *s_cur_sge; + u32 s_flags; + struct hfi1_swqe *s_wqe; + struct hfi1_sge_state s_sge; /* current send request data */ + struct hfi1_mregion *s_rdma_mr; + struct sdma_engine *s_sde; /* current sde */ + u32 s_cur_size; /* size of send packet in bytes */ + u32 s_len; /* total length of s_sge */ + u32 s_rdma_read_len; /* total length of s_rdma_read_sge */ + u32 s_next_psn; /* PSN for next request */ + u32 s_last_psn; /* last response PSN processed */ + u32 s_sending_psn; /* lowest PSN that is being sent */ + u32 s_sending_hpsn; /* highest PSN that is being sent */ + u32 s_psn; /* current packet sequence number */ + u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */ + u32 s_ack_psn; /* PSN for acking sends and RDMA writes */ + u32 s_head; /* new entries added here */ + u32 s_tail; /* next entry to process */ + u32 s_cur; /* current work queue entry */ + u32 s_acked; /* last un-ACK'ed entry */ + u32 s_last; /* last completed entry */ + u32 s_ssn; /* SSN of tail entry */ + u32 s_lsn; /* limit sequence number (credit) */ + u16 s_hdrwords; /* size of s_hdr in 32 bit words */ + u16 s_rdma_ack_cnt; + s8 s_ahgidx; + u8 s_state; /* opcode of last packet sent */ + u8 s_ack_state; /* opcode of packet to ACK */ + u8 s_nak_state; /* non-zero if NAK is pending */ + u8 r_nak_state; /* non-zero if NAK is pending */ + u8 s_retry; /* requester retry counter */ + u8 s_rnr_retry; /* requester RNR retry counter */ + u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */ + u8 s_tail_ack_queue; /* index into s_ack_queue[] */ + + struct hfi1_sge_state s_ack_rdma_sge; + struct timer_list s_timer; + + struct iowait s_iowait; + + struct hfi1_sge r_sg_list[0] /* verified SGEs */ + ____cacheline_aligned_in_smp; +}; + +/* + * Atomic bit definitions for r_aflags. + */ +#define HFI1_R_WRID_VALID 0 +#define HFI1_R_REWIND_SGE 1 + +/* + * Bit definitions for r_flags. + */ +#define HFI1_R_REUSE_SGE 0x01 +#define HFI1_R_RDMAR_SEQ 0x02 +#define HFI1_R_RSP_NAK 0x04 +#define HFI1_R_RSP_SEND 0x08 +#define HFI1_R_COMM_EST 0x10 + +/* + * Bit definitions for s_flags. + * + * HFI1_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled + * HFI1_S_BUSY - send tasklet is processing the QP + * HFI1_S_TIMER - the RC retry timer is active + * HFI1_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics + * HFI1_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs + * before processing the next SWQE + * HFI1_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete + * before processing the next SWQE + * HFI1_S_WAIT_RNR - waiting for RNR timeout + * HFI1_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE + * HFI1_S_WAIT_DMA - waiting for send DMA queue to drain before generating + * next send completion entry not via send DMA + * HFI1_S_WAIT_PIO - waiting for a send buffer to be available + * HFI1_S_WAIT_TX - waiting for a struct verbs_txreq to be available + * HFI1_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available + * HFI1_S_WAIT_KMEM - waiting for kernel memory to be available + * HFI1_S_WAIT_PSN - waiting for a packet to exit the send DMA queue + * HFI1_S_WAIT_ACK - waiting for an ACK packet before sending more requests + * HFI1_S_SEND_ONE - send one packet, request ACK, then wait for ACK + * HFI1_S_ECN - a BECN was queued to the send engine + */ +#define HFI1_S_SIGNAL_REQ_WR 0x0001 +#define HFI1_S_BUSY 0x0002 +#define HFI1_S_TIMER 0x0004 +#define HFI1_S_RESP_PENDING 0x0008 +#define HFI1_S_ACK_PENDING 0x0010 +#define HFI1_S_WAIT_FENCE 0x0020 +#define HFI1_S_WAIT_RDMAR 0x0040 +#define HFI1_S_WAIT_RNR 0x0080 +#define HFI1_S_WAIT_SSN_CREDIT 0x0100 +#define HFI1_S_WAIT_DMA 0x0200 +#define HFI1_S_WAIT_PIO 0x0400 +#define HFI1_S_WAIT_TX 0x0800 +#define HFI1_S_WAIT_DMA_DESC 0x1000 +#define HFI1_S_WAIT_KMEM 0x2000 +#define HFI1_S_WAIT_PSN 0x4000 +#define HFI1_S_WAIT_ACK 0x8000 +#define HFI1_S_SEND_ONE 0x10000 +#define HFI1_S_UNLIMITED_CREDIT 0x20000 +#define HFI1_S_AHG_VALID 0x40000 +#define HFI1_S_AHG_CLEAR 0x80000 +#define HFI1_S_ECN 0x100000 + +/* + * Wait flags that would prevent any packet type from being sent. + */ +#define HFI1_S_ANY_WAIT_IO (HFI1_S_WAIT_PIO | HFI1_S_WAIT_TX | \ + HFI1_S_WAIT_DMA_DESC | HFI1_S_WAIT_KMEM) + +/* + * Wait flags that would prevent send work requests from making progress. + */ +#define HFI1_S_ANY_WAIT_SEND (HFI1_S_WAIT_FENCE | HFI1_S_WAIT_RDMAR | \ + HFI1_S_WAIT_RNR | HFI1_S_WAIT_SSN_CREDIT | HFI1_S_WAIT_DMA | \ + HFI1_S_WAIT_PSN | HFI1_S_WAIT_ACK) + +#define HFI1_S_ANY_WAIT (HFI1_S_ANY_WAIT_IO | HFI1_S_ANY_WAIT_SEND) + +#define HFI1_PSN_CREDIT 16 + +/* + * Since struct hfi1_swqe is not a fixed size, we can't simply index into + * struct hfi1_qp.s_wq. This function does the array index computation. + */ +static inline struct hfi1_swqe *get_swqe_ptr(struct hfi1_qp *qp, + unsigned n) +{ + return (struct hfi1_swqe *)((char *)qp->s_wq + + (sizeof(struct hfi1_swqe) + + qp->s_max_sge * + sizeof(struct hfi1_sge)) * n); +} + +/* + * Since struct hfi1_rwqe is not a fixed size, we can't simply index into + * struct hfi1_rwq.wq. This function does the array index computation. + */ +static inline struct hfi1_rwqe *get_rwqe_ptr(struct hfi1_rq *rq, unsigned n) +{ + return (struct hfi1_rwqe *) + ((char *) rq->wq->wq + + (sizeof(struct hfi1_rwqe) + + rq->max_sge * sizeof(struct ib_sge)) * n); +} + +#define MAX_LKEY_TABLE_BITS 23 + +struct hfi1_lkey_table { + spinlock_t lock; /* protect changes in this struct */ + u32 next; /* next unused index (speeds search) */ + u32 gen; /* generation count */ + u32 max; /* size of the table */ + struct hfi1_mregion __rcu **table; +}; + +struct hfi1_opcode_stats { + u64 n_packets; /* number of packets */ + u64 n_bytes; /* total number of bytes */ +}; + +struct hfi1_opcode_stats_perctx { + struct hfi1_opcode_stats stats[256]; +}; + +static inline void inc_opstats( + u32 tlen, + struct hfi1_opcode_stats *stats) +{ +#ifdef CONFIG_DEBUG_FS + stats->n_bytes += tlen; + stats->n_packets++; +#endif +} + +struct hfi1_ibport { + struct hfi1_qp __rcu *qp[2]; + struct ib_mad_agent *send_agent; /* agent for SMI (traps) */ + struct hfi1_ah *sm_ah; + struct hfi1_ah *smi_ah; + struct rb_root mcast_tree; + spinlock_t lock; /* protect changes in this struct */ + + /* non-zero when timer is set */ + unsigned long mkey_lease_timeout; + unsigned long trap_timeout; + __be64 gid_prefix; /* in network order */ + __be64 mkey; + __be64 guids[HFI1_GUIDS_PER_PORT - 1]; /* writable GUIDs */ + u64 tid; /* TID for traps */ + u64 n_rc_resends; + u64 n_seq_naks; + u64 n_rdma_seq; + u64 n_rnr_naks; + u64 n_other_naks; + u64 n_loop_pkts; + u64 n_pkt_drops; + u64 n_vl15_dropped; + u64 n_rc_timeouts; + u64 n_dmawait; + u64 n_unaligned; + u64 n_rc_dupreq; + u64 n_rc_seqnak; + + /* Hot-path per CPU counters to avoid cacheline trading to update */ + u64 z_rc_acks; + u64 z_rc_qacks; + u64 z_rc_delayed_comp; + u64 __percpu *rc_acks; + u64 __percpu *rc_qacks; + u64 __percpu *rc_delayed_comp; + + u32 port_cap_flags; + u32 pma_sample_start; + u32 pma_sample_interval; + __be16 pma_counter_select[5]; + u16 pma_tag; + u16 pkey_violations; + u16 qkey_violations; + u16 mkey_violations; + u16 mkey_lease_period; + u16 sm_lid; + u16 repress_traps; + u8 sm_sl; + u8 mkeyprot; + u8 subnet_timeout; + u8 vl_high_limit; + /* the first 16 entries are sl_to_vl for !OPA */ + u8 sl_to_sc[32]; + u8 sc_to_sl[32]; +}; + + +struct hfi1_qp_ibdev; +struct hfi1_ibdev { + struct ib_device ibdev; + struct list_head pending_mmaps; + spinlock_t mmap_offset_lock; /* protect mmap_offset */ + u32 mmap_offset; + struct hfi1_mregion __rcu *dma_mr; + + struct hfi1_qp_ibdev *qp_dev; + + /* QP numbers are shared by all IB ports */ + struct hfi1_lkey_table lk_table; + /* protect wait lists */ + seqlock_t iowait_lock; + struct list_head txwait; /* list for wait verbs_txreq */ + struct list_head memwait; /* list for wait kernel memory */ + struct list_head txreq_free; + struct kmem_cache *verbs_txreq_cache; + struct timer_list mem_timer; + + /* other waiters */ + spinlock_t pending_lock; + + u64 n_piowait; + u64 n_txwait; + u64 n_kmem_wait; + + u32 n_pds_allocated; /* number of PDs allocated for device */ + spinlock_t n_pds_lock; + u32 n_ahs_allocated; /* number of AHs allocated for device */ + spinlock_t n_ahs_lock; + u32 n_cqs_allocated; /* number of CQs allocated for device */ + spinlock_t n_cqs_lock; + u32 n_qps_allocated; /* number of QPs allocated for device */ + spinlock_t n_qps_lock; + u32 n_srqs_allocated; /* number of SRQs allocated for device */ + spinlock_t n_srqs_lock; + u32 n_mcast_grps_allocated; /* number of mcast groups allocated */ + spinlock_t n_mcast_grps_lock; +#ifdef CONFIG_DEBUG_FS + /* per HFI debugfs */ + struct dentry *hfi1_ibdev_dbg; + /* per HFI symlinks to above */ + struct dentry *hfi1_ibdev_link; +#endif +}; + +struct hfi1_verbs_counters { + u64 symbol_error_counter; + u64 link_error_recovery_counter; + u64 link_downed_counter; + u64 port_rcv_errors; + u64 port_rcv_remphys_errors; + u64 port_xmit_discards; + u64 port_xmit_data; + u64 port_rcv_data; + u64 port_xmit_packets; + u64 port_rcv_packets; + u32 local_link_integrity_errors; + u32 excessive_buffer_overrun_errors; + u32 vl15_dropped; +}; + +static inline struct hfi1_mr *to_imr(struct ib_mr *ibmr) +{ + return container_of(ibmr, struct hfi1_mr, ibmr); +} + +static inline struct hfi1_pd *to_ipd(struct ib_pd *ibpd) +{ + return container_of(ibpd, struct hfi1_pd, ibpd); +} + +static inline struct hfi1_ah *to_iah(struct ib_ah *ibah) +{ + return container_of(ibah, struct hfi1_ah, ibah); +} + +static inline struct hfi1_cq *to_icq(struct ib_cq *ibcq) +{ + return container_of(ibcq, struct hfi1_cq, ibcq); +} + +static inline struct hfi1_srq *to_isrq(struct ib_srq *ibsrq) +{ + return container_of(ibsrq, struct hfi1_srq, ibsrq); +} + +static inline struct hfi1_qp *to_iqp(struct ib_qp *ibqp) +{ + return container_of(ibqp, struct hfi1_qp, ibqp); +} + +static inline struct hfi1_ibdev *to_idev(struct ib_device *ibdev) +{ + return container_of(ibdev, struct hfi1_ibdev, ibdev); +} + +/* + * Send if not busy or waiting for I/O and either + * a RC response is pending or we can process send work requests. + */ +static inline int hfi1_send_ok(struct hfi1_qp *qp) +{ + return !(qp->s_flags & (HFI1_S_BUSY | HFI1_S_ANY_WAIT_IO)) && + (qp->s_hdrwords || (qp->s_flags & HFI1_S_RESP_PENDING) || + !(qp->s_flags & HFI1_S_ANY_WAIT_SEND)); +} + +/* + * This must be called with s_lock held. + */ +void hfi1_schedule_send(struct hfi1_qp *qp); +void hfi1_bad_pqkey(struct hfi1_ibport *ibp, __be16 trap_num, u32 key, u32 sl, + u32 qp1, u32 qp2, __be16 lid1, __be16 lid2); +void hfi1_cap_mask_chg(struct hfi1_ibport *ibp); +void hfi1_sys_guid_chg(struct hfi1_ibport *ibp); +void hfi1_node_desc_chg(struct hfi1_ibport *ibp); +int hfi1_process_mad(struct ib_device *ibdev, int mad_flags, u8 port, + const struct ib_wc *in_wc, const struct ib_grh *in_grh, + const struct ib_mad_hdr *in_mad, size_t in_mad_size, + struct ib_mad_hdr *out_mad, size_t *out_mad_size, + u16 *out_mad_pkey_index); +int hfi1_create_agents(struct hfi1_ibdev *dev); +void hfi1_free_agents(struct hfi1_ibdev *dev); + +/* + * The PSN_MASK and PSN_SHIFT allow for + * 1) comparing two PSNs + * 2) returning the PSN with any upper bits masked + * 3) returning the difference between to PSNs + * + * The number of significant bits in the PSN must + * necessarily be at least one bit less than + * the container holding the PSN. + */ +#ifndef CONFIG_HFI1_VERBS_31BIT_PSN +#define PSN_MASK 0xFFFFFF +#define PSN_SHIFT 8 +#else +#define PSN_MASK 0x7FFFFFFF +#define PSN_SHIFT 1 +#endif +#define PSN_MODIFY_MASK 0xFFFFFF + +/* Number of bits to pay attention to in the opcode for checking qp type */ +#define OPCODE_QP_MASK 0xE0 + +/* + * Compare the lower 24 bits of the msn values. + * Returns an integer <, ==, or > than zero. + */ +static inline int cmp_msn(u32 a, u32 b) +{ + return (((int) a) - ((int) b)) << 8; +} + +/* + * Compare two PSNs + * Returns an integer <, ==, or > than zero. + */ +static inline int cmp_psn(u32 a, u32 b) +{ + return (((int) a) - ((int) b)) << PSN_SHIFT; +} + +/* + * Return masked PSN + */ +static inline u32 mask_psn(u32 a) +{ + return a & PSN_MASK; +} + +/* + * Return delta between two PSNs + */ +static inline u32 delta_psn(u32 a, u32 b) +{ + return (((int)a - (int)b) << PSN_SHIFT) >> PSN_SHIFT; +} + +struct hfi1_mcast *hfi1_mcast_find(struct hfi1_ibport *ibp, union ib_gid *mgid); + +int hfi1_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid); + +int hfi1_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid); + +int hfi1_mcast_tree_empty(struct hfi1_ibport *ibp); + +struct verbs_txreq; +void hfi1_put_txreq(struct verbs_txreq *tx); + +int hfi1_verbs_send(struct hfi1_qp *qp, struct ahg_ib_header *ahdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len); + +void hfi1_copy_sge(struct hfi1_sge_state *ss, void *data, u32 length, + int release); + +void hfi1_skip_sge(struct hfi1_sge_state *ss, u32 length, int release); + +void hfi1_cnp_rcv(struct hfi1_packet *packet); + +void hfi1_uc_rcv(struct hfi1_packet *packet); + +void hfi1_rc_rcv(struct hfi1_packet *packet); + +void hfi1_rc_hdrerr( + struct hfi1_ctxtdata *rcd, + struct hfi1_ib_header *hdr, + u32 rcv_flags, + struct hfi1_qp *qp); + +u8 ah_to_sc(struct ib_device *ibdev, struct ib_ah_attr *ah_attr); + +int hfi1_check_ah(struct ib_device *ibdev, struct ib_ah_attr *ah_attr); + +struct ib_ah *hfi1_create_qp0_ah(struct hfi1_ibport *ibp, u16 dlid); + +void hfi1_rc_rnr_retry(unsigned long arg); + +void hfi1_rc_send_complete(struct hfi1_qp *qp, struct hfi1_ib_header *hdr); + +void hfi1_rc_error(struct hfi1_qp *qp, enum ib_wc_status err); + +void hfi1_ud_rcv(struct hfi1_packet *packet); + +int hfi1_lookup_pkey_idx(struct hfi1_ibport *ibp, u16 pkey); + +int hfi1_alloc_lkey(struct hfi1_mregion *mr, int dma_region); + +void hfi1_free_lkey(struct hfi1_mregion *mr); + +int hfi1_lkey_ok(struct hfi1_lkey_table *rkt, struct hfi1_pd *pd, + struct hfi1_sge *isge, struct ib_sge *sge, int acc); + +int hfi1_rkey_ok(struct hfi1_qp *qp, struct hfi1_sge *sge, + u32 len, u64 vaddr, u32 rkey, int acc); + +int hfi1_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr); + +struct ib_srq *hfi1_create_srq(struct ib_pd *ibpd, + struct ib_srq_init_attr *srq_init_attr, + struct ib_udata *udata); + +int hfi1_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask, + struct ib_udata *udata); + +int hfi1_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr); + +int hfi1_destroy_srq(struct ib_srq *ibsrq); + +int hfi1_cq_init(struct hfi1_devdata *dd); + +void hfi1_cq_exit(struct hfi1_devdata *dd); + +void hfi1_cq_enter(struct hfi1_cq *cq, struct ib_wc *entry, int sig); + +int hfi1_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry); + +struct ib_cq *hfi1_create_cq( + struct ib_device *ibdev, + const struct ib_cq_init_attr *attr, + struct ib_ucontext *context, + struct ib_udata *udata); + +int hfi1_destroy_cq(struct ib_cq *ibcq); + +int hfi1_req_notify_cq( + struct ib_cq *ibcq, + enum ib_cq_notify_flags notify_flags); + +int hfi1_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata); + +struct ib_mr *hfi1_get_dma_mr(struct ib_pd *pd, int acc); + +struct ib_mr *hfi1_reg_phys_mr(struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, int acc, u64 *iova_start); + +struct ib_mr *hfi1_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, + u64 virt_addr, int mr_access_flags, + struct ib_udata *udata); + +int hfi1_dereg_mr(struct ib_mr *ibmr); + +struct ib_mr *hfi1_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len); + +struct ib_fast_reg_page_list *hfi1_alloc_fast_reg_page_list( + struct ib_device *ibdev, int page_list_len); + +void hfi1_free_fast_reg_page_list(struct ib_fast_reg_page_list *pl); + +int hfi1_fast_reg_mr(struct hfi1_qp *qp, struct ib_send_wr *wr); + +struct ib_fmr *hfi1_alloc_fmr(struct ib_pd *pd, int mr_access_flags, + struct ib_fmr_attr *fmr_attr); + +int hfi1_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list, + int list_len, u64 iova); + +int hfi1_unmap_fmr(struct list_head *fmr_list); + +int hfi1_dealloc_fmr(struct ib_fmr *ibfmr); + +static inline void hfi1_get_mr(struct hfi1_mregion *mr) +{ + atomic_inc(&mr->refcount); +} + +static inline void hfi1_put_mr(struct hfi1_mregion *mr) +{ + if (unlikely(atomic_dec_and_test(&mr->refcount))) + complete(&mr->comp); +} + +static inline void hfi1_put_ss(struct hfi1_sge_state *ss) +{ + while (ss->num_sge) { + hfi1_put_mr(ss->sge.mr); + if (--ss->num_sge) + ss->sge = *ss->sg_list++; + } +} + +void hfi1_release_mmap_info(struct kref *ref); + +struct hfi1_mmap_info *hfi1_create_mmap_info(struct hfi1_ibdev *dev, u32 size, + struct ib_ucontext *context, + void *obj); + +void hfi1_update_mmap_info(struct hfi1_ibdev *dev, struct hfi1_mmap_info *ip, + u32 size, void *obj); + +int hfi1_mmap(struct ib_ucontext *context, struct vm_area_struct *vma); + +int hfi1_get_rwqe(struct hfi1_qp *qp, int wr_id_only); + +void hfi1_migrate_qp(struct hfi1_qp *qp); + +int hfi1_ruc_check_hdr(struct hfi1_ibport *ibp, struct hfi1_ib_header *hdr, + int has_grh, struct hfi1_qp *qp, u32 bth0); + +u32 hfi1_make_grh(struct hfi1_ibport *ibp, struct ib_grh *hdr, + struct ib_global_route *grh, u32 hwords, u32 nwords); + +void clear_ahg(struct hfi1_qp *qp); + +void hfi1_make_ruc_header(struct hfi1_qp *qp, struct hfi1_other_headers *ohdr, + u32 bth0, u32 bth2, int middle); + +void hfi1_do_send(struct work_struct *work); + +void hfi1_send_complete(struct hfi1_qp *qp, struct hfi1_swqe *wqe, + enum ib_wc_status status); + +void hfi1_send_rc_ack(struct hfi1_ctxtdata *, struct hfi1_qp *qp, int is_fecn); + +int hfi1_make_rc_req(struct hfi1_qp *qp); + +int hfi1_make_uc_req(struct hfi1_qp *qp); + +int hfi1_make_ud_req(struct hfi1_qp *qp); + +int hfi1_register_ib_device(struct hfi1_devdata *); + +void hfi1_unregister_ib_device(struct hfi1_devdata *); + +void hfi1_ib_rcv(struct hfi1_packet *packet); + +unsigned hfi1_get_npkeys(struct hfi1_devdata *); + +int hfi1_verbs_send_dma(struct hfi1_qp *qp, struct ahg_ib_header *hdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); + +int hfi1_verbs_send_pio(struct hfi1_qp *qp, struct ahg_ib_header *hdr, + u32 hdrwords, struct hfi1_sge_state *ss, u32 len, + u32 plen, u32 dwords, u64 pbc); + +struct send_context *qp_to_send_context(struct hfi1_qp *qp, u8 sc5); + +extern const enum ib_wc_opcode ib_hfi1_wc_opcode[]; + +extern const u8 hdr_len_by_opcode[]; + +extern const int ib_hfi1_state_ops[]; + +extern __be64 ib_hfi1_sys_image_guid; /* in network order */ + +extern unsigned int hfi1_lkey_table_size; + +extern unsigned int hfi1_max_cqes; + +extern unsigned int hfi1_max_cqs; + +extern unsigned int hfi1_max_qp_wrs; + +extern unsigned int hfi1_max_qps; + +extern unsigned int hfi1_max_sges; + +extern unsigned int hfi1_max_mcast_grps; + +extern unsigned int hfi1_max_mcast_qp_attached; + +extern unsigned int hfi1_max_srqs; + +extern unsigned int hfi1_max_srq_sges; + +extern unsigned int hfi1_max_srq_wrs; + +extern const u32 ib_hfi1_rnr_table[]; + +extern struct ib_dma_mapping_ops hfi1_dma_mapping_ops; + +#endif /* HFI1_VERBS_H */ diff --git a/drivers/staging/rdma/hfi1/verbs_mcast.c b/drivers/staging/rdma/hfi1/verbs_mcast.c new file mode 100644 index 000000000000..afc6b4c61a1d --- /dev/null +++ b/drivers/staging/rdma/hfi1/verbs_mcast.c @@ -0,0 +1,385 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/rculist.h> + +#include "hfi.h" + +/** + * mcast_qp_alloc - alloc a struct to link a QP to mcast GID struct + * @qp: the QP to link + */ +static struct hfi1_mcast_qp *mcast_qp_alloc(struct hfi1_qp *qp) +{ + struct hfi1_mcast_qp *mqp; + + mqp = kmalloc(sizeof(*mqp), GFP_KERNEL); + if (!mqp) + goto bail; + + mqp->qp = qp; + atomic_inc(&qp->refcount); + +bail: + return mqp; +} + +static void mcast_qp_free(struct hfi1_mcast_qp *mqp) +{ + struct hfi1_qp *qp = mqp->qp; + + /* Notify hfi1_destroy_qp() if it is waiting. */ + if (atomic_dec_and_test(&qp->refcount)) + wake_up(&qp->wait); + + kfree(mqp); +} + +/** + * mcast_alloc - allocate the multicast GID structure + * @mgid: the multicast GID + * + * A list of QPs will be attached to this structure. + */ +static struct hfi1_mcast *mcast_alloc(union ib_gid *mgid) +{ + struct hfi1_mcast *mcast; + + mcast = kmalloc(sizeof(*mcast), GFP_KERNEL); + if (!mcast) + goto bail; + + mcast->mgid = *mgid; + INIT_LIST_HEAD(&mcast->qp_list); + init_waitqueue_head(&mcast->wait); + atomic_set(&mcast->refcount, 0); + mcast->n_attached = 0; + +bail: + return mcast; +} + +static void mcast_free(struct hfi1_mcast *mcast) +{ + struct hfi1_mcast_qp *p, *tmp; + + list_for_each_entry_safe(p, tmp, &mcast->qp_list, list) + mcast_qp_free(p); + + kfree(mcast); +} + +/** + * hfi1_mcast_find - search the global table for the given multicast GID + * @ibp: the IB port structure + * @mgid: the multicast GID to search for + * + * Returns NULL if not found. + * + * The caller is responsible for decrementing the reference count if found. + */ +struct hfi1_mcast *hfi1_mcast_find(struct hfi1_ibport *ibp, union ib_gid *mgid) +{ + struct rb_node *n; + unsigned long flags; + struct hfi1_mcast *mcast; + + spin_lock_irqsave(&ibp->lock, flags); + n = ibp->mcast_tree.rb_node; + while (n) { + int ret; + + mcast = rb_entry(n, struct hfi1_mcast, rb_node); + + ret = memcmp(mgid->raw, mcast->mgid.raw, + sizeof(union ib_gid)); + if (ret < 0) + n = n->rb_left; + else if (ret > 0) + n = n->rb_right; + else { + atomic_inc(&mcast->refcount); + spin_unlock_irqrestore(&ibp->lock, flags); + goto bail; + } + } + spin_unlock_irqrestore(&ibp->lock, flags); + + mcast = NULL; + +bail: + return mcast; +} + +/** + * mcast_add - insert mcast GID into table and attach QP struct + * @mcast: the mcast GID table + * @mqp: the QP to attach + * + * Return zero if both were added. Return EEXIST if the GID was already in + * the table but the QP was added. Return ESRCH if the QP was already + * attached and neither structure was added. + */ +static int mcast_add(struct hfi1_ibdev *dev, struct hfi1_ibport *ibp, + struct hfi1_mcast *mcast, struct hfi1_mcast_qp *mqp) +{ + struct rb_node **n = &ibp->mcast_tree.rb_node; + struct rb_node *pn = NULL; + int ret; + + spin_lock_irq(&ibp->lock); + + while (*n) { + struct hfi1_mcast *tmcast; + struct hfi1_mcast_qp *p; + + pn = *n; + tmcast = rb_entry(pn, struct hfi1_mcast, rb_node); + + ret = memcmp(mcast->mgid.raw, tmcast->mgid.raw, + sizeof(union ib_gid)); + if (ret < 0) { + n = &pn->rb_left; + continue; + } + if (ret > 0) { + n = &pn->rb_right; + continue; + } + + /* Search the QP list to see if this is already there. */ + list_for_each_entry_rcu(p, &tmcast->qp_list, list) { + if (p->qp == mqp->qp) { + ret = ESRCH; + goto bail; + } + } + if (tmcast->n_attached == hfi1_max_mcast_qp_attached) { + ret = ENOMEM; + goto bail; + } + + tmcast->n_attached++; + + list_add_tail_rcu(&mqp->list, &tmcast->qp_list); + ret = EEXIST; + goto bail; + } + + spin_lock(&dev->n_mcast_grps_lock); + if (dev->n_mcast_grps_allocated == hfi1_max_mcast_grps) { + spin_unlock(&dev->n_mcast_grps_lock); + ret = ENOMEM; + goto bail; + } + + dev->n_mcast_grps_allocated++; + spin_unlock(&dev->n_mcast_grps_lock); + + mcast->n_attached++; + + list_add_tail_rcu(&mqp->list, &mcast->qp_list); + + atomic_inc(&mcast->refcount); + rb_link_node(&mcast->rb_node, pn, n); + rb_insert_color(&mcast->rb_node, &ibp->mcast_tree); + + ret = 0; + +bail: + spin_unlock_irq(&ibp->lock); + + return ret; +} + +int hfi1_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + struct hfi1_ibdev *dev = to_idev(ibqp->device); + struct hfi1_ibport *ibp; + struct hfi1_mcast *mcast; + struct hfi1_mcast_qp *mqp; + int ret; + + if (ibqp->qp_num <= 1 || qp->state == IB_QPS_RESET) { + ret = -EINVAL; + goto bail; + } + + /* + * Allocate data structures since its better to do this outside of + * spin locks and it will most likely be needed. + */ + mcast = mcast_alloc(gid); + if (mcast == NULL) { + ret = -ENOMEM; + goto bail; + } + mqp = mcast_qp_alloc(qp); + if (mqp == NULL) { + mcast_free(mcast); + ret = -ENOMEM; + goto bail; + } + ibp = to_iport(ibqp->device, qp->port_num); + switch (mcast_add(dev, ibp, mcast, mqp)) { + case ESRCH: + /* Neither was used: OK to attach the same QP twice. */ + mcast_qp_free(mqp); + mcast_free(mcast); + break; + + case EEXIST: /* The mcast wasn't used */ + mcast_free(mcast); + break; + + case ENOMEM: + /* Exceeded the maximum number of mcast groups. */ + mcast_qp_free(mqp); + mcast_free(mcast); + ret = -ENOMEM; + goto bail; + + default: + break; + } + + ret = 0; + +bail: + return ret; +} + +int hfi1_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + struct hfi1_qp *qp = to_iqp(ibqp); + struct hfi1_ibdev *dev = to_idev(ibqp->device); + struct hfi1_ibport *ibp = to_iport(ibqp->device, qp->port_num); + struct hfi1_mcast *mcast = NULL; + struct hfi1_mcast_qp *p, *tmp; + struct rb_node *n; + int last = 0; + int ret; + + if (ibqp->qp_num <= 1 || qp->state == IB_QPS_RESET) { + ret = -EINVAL; + goto bail; + } + + spin_lock_irq(&ibp->lock); + + /* Find the GID in the mcast table. */ + n = ibp->mcast_tree.rb_node; + while (1) { + if (n == NULL) { + spin_unlock_irq(&ibp->lock); + ret = -EINVAL; + goto bail; + } + + mcast = rb_entry(n, struct hfi1_mcast, rb_node); + ret = memcmp(gid->raw, mcast->mgid.raw, + sizeof(union ib_gid)); + if (ret < 0) + n = n->rb_left; + else if (ret > 0) + n = n->rb_right; + else + break; + } + + /* Search the QP list. */ + list_for_each_entry_safe(p, tmp, &mcast->qp_list, list) { + if (p->qp != qp) + continue; + /* + * We found it, so remove it, but don't poison the forward + * link until we are sure there are no list walkers. + */ + list_del_rcu(&p->list); + mcast->n_attached--; + + /* If this was the last attached QP, remove the GID too. */ + if (list_empty(&mcast->qp_list)) { + rb_erase(&mcast->rb_node, &ibp->mcast_tree); + last = 1; + } + break; + } + + spin_unlock_irq(&ibp->lock); + + if (p) { + /* + * Wait for any list walkers to finish before freeing the + * list element. + */ + wait_event(mcast->wait, atomic_read(&mcast->refcount) <= 1); + mcast_qp_free(p); + } + if (last) { + atomic_dec(&mcast->refcount); + wait_event(mcast->wait, !atomic_read(&mcast->refcount)); + mcast_free(mcast); + spin_lock_irq(&dev->n_mcast_grps_lock); + dev->n_mcast_grps_allocated--; + spin_unlock_irq(&dev->n_mcast_grps_lock); + } + + ret = 0; + +bail: + return ret; +} + +int hfi1_mcast_tree_empty(struct hfi1_ibport *ibp) +{ + return ibp->mcast_tree.rb_node == NULL; +} |