Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans

Immutable branch between MFD, EDAC, I2C, LEDs, PinCtrl, Platform and Watchdog due for the v5.20 merge window

19 files changed, 464 insertions, 243 deletions

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index d3e2477948c8..17562cf1fe97 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -263,6 +263,7 @@ config EDAC_I10NM
 config EDAC_PND2
 	tristate "Intel Pondicherry2"
 	depends on PCI && X86_64 && X86_MCE_INTEL
+	select P2SB if X86
 	help
 	  Support for error detection and correction on the Intel
 	  Pondicherry2 Integrated Memory Controller. This SoC IP is
diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index c94ca1f790c4..a20b299f1202 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -28,6 +28,8 @@
 #include <linux/bitmap.h>
 #include <linux/math64.h>
 #include <linux/mod_devicetable.h>
+#include <linux/platform_data/x86/p2sb.h>
+
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/processor.h>
@@ -232,42 +234,14 @@ static u64 get_mem_ctrl_hub_base_addr(void)
 	return U64_LSHIFT(hi.base, 32) | U64_LSHIFT(lo.base, 15);
 }
 
-static u64 get_sideband_reg_base_addr(void)
-{
-	struct pci_dev *pdev;
-	u32 hi, lo;
-	u8 hidden;
-
-	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x19dd, NULL);
-	if (pdev) {
-		/* Unhide the P2SB device, if it's hidden */
-		pci_read_config_byte(pdev, 0xe1, &hidden);
-		if (hidden)
-			pci_write_config_byte(pdev, 0xe1, 0);
-
-		pci_read_config_dword(pdev, 0x10, &lo);
-		pci_read_config_dword(pdev, 0x14, &hi);
-		lo &= 0xfffffff0;
-
-		/* Hide the P2SB device, if it was hidden before */
-		if (hidden)
-			pci_write_config_byte(pdev, 0xe1, hidden);
-
-		pci_dev_put(pdev);
-		return (U64_LSHIFT(hi, 32) | U64_LSHIFT(lo, 0));
-	} else {
-		return 0xfd000000;
-	}
-}
-
 #define DNV_MCHBAR_SIZE  0x8000
 #define DNV_SB_PORT_SIZE 0x10000
 static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
 {
 	struct pci_dev *pdev;
-	char *base;
-	u64 addr;
-	unsigned long size;
+	void __iomem *base;
+	struct resource r;
+	int ret;
 
 	if (op == 4) {
 		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
@@ -279,26 +253,30 @@ static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *na
 	} else {
 		/* MMIO via memory controller hub base address */
 		if (op == 0 && port == 0x4c) {
-			addr = get_mem_ctrl_hub_base_addr();
-			if (!addr)
+			memset(&r, 0, sizeof(r));
+
+			r.start = get_mem_ctrl_hub_base_addr();
+			if (!r.start)
 				return -ENODEV;
-			size = DNV_MCHBAR_SIZE;
+			r.end = r.start + DNV_MCHBAR_SIZE - 1;
 		} else {
 			/* MMIO via sideband register base address */
-			addr = get_sideband_reg_base_addr();
-			if (!addr)
-				return -ENODEV;
-			addr += (port << 16);
-			size = DNV_SB_PORT_SIZE;
+			ret = p2sb_bar(NULL, 0, &r);
+			if (ret)
+				return ret;
+
+			r.start += (port << 16);
+			r.end = r.start + DNV_SB_PORT_SIZE - 1;
 		}
 
-		base = ioremap((resource_size_t)addr, size);
+		base = ioremap(r.start, resource_size(&r));
 		if (!base)
 			return -ENODEV;
 
 		if (sz == 8)
-			*(u32 *)(data + 4) = *(u32 *)(base + off + 4);
-		*(u32 *)data = *(u32 *)(base + off);
+			*(u64 *)data = readq(base + off);
+		else
+			*(u32 *)data = readl(base + off);
 
 		iounmap(base);
 	}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a1bae59208e3..4d0a195ca3ef 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_HIX5HD2
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
+	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
 	help
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ff706349bdfb..f7a0bb372e8e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -111,6 +111,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 
@@ -140,7 +141,6 @@
 #define TCOBASE		0x050
 #define TCOCTL		0x054
 
-#define SBREG_BAR		0x10
 #define SBREG_SMBCTRL		0xc6000c
 #define SBREG_SMBCTRL_DNV	0xcf000c
 
@@ -1482,45 +1482,24 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 		.version = 4,
 	};
 	struct resource *res;
-	unsigned int devfn;
-	u64 base64_addr;
-	u32 base_addr;
-	u8 hidden;
+	int ret;
 
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
-	 * bridge (P2SB). The BIOS prevents the P2SB device from being
-	 * enumerated by the PCI subsystem, so we need to unhide/hide it
-	 * to lookup the P2SB BAR.
+	 * (P2SB) bridge.
 	 */
-	pci_lock_rescan_remove();
-
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
-
-	/* Unhide the P2SB device, if it is hidden */
-	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
-	base64_addr = base_addr & 0xfffffff0;
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
-	base64_addr |= (u64)base_addr << 32;
-
-	/* Hide the P2SB device, if it was hidden before */
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
-	pci_unlock_rescan_remove();
 
 	res = &tco_res[1];
+	ret = p2sb_bar(pci_dev->bus, 0, res);
+	if (ret)
+		return ERR_PTR(ret);
+
 	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+		res->start += SBREG_SMBCTRL_DNV;
 	else
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+		res->start += SBREG_SMBCTRL;
 
 	res->end = res->start + 3;
-	res->flags = IORESOURCE_MEM;
 
 	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
 					tco_res, 2, &pldata, sizeof(pldata));
diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
index 9f6a68336659..fd2b8225d926 100644
--- a/drivers/leds/simple/Kconfig
+++ b/drivers/leds/simple/Kconfig
@@ -1,11 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config LEDS_SIEMENS_SIMATIC_IPC
 	tristate "LED driver for Siemens Simatic IPCs"
-	depends on LEDS_CLASS
+	depends on LEDS_GPIO
 	depends on SIEMENS_SIMATIC_IPC
 	help
 	  This option enables support for the LEDs of several Industrial PCs
 	  from Siemens.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called simatic-ipc-leds.
+	  To compile this driver as a module, choose M here: the modules
+	  will be called simatic-ipc-leds and simatic-ipc-leds-gpio.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
index 8481f1e9e360..1c7ef5e1324b 100644
--- a/drivers/leds/simple/Makefile
+++ b/drivers/leds/simple/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds.o
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds-gpio.o
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
new file mode 100644
index 000000000000..4c9e663a90ba
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for GPIO based LEDs
+ *
+ * Copyright (c) Siemens AG, 2022
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ */
+
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 52, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 53, NULL, 2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 57, NULL, 3, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 5, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
+	},
+};
+
+static const struct gpio_led simatic_ipc_gpio_leds[] = {
+	{ .name = "green:" LED_FUNCTION_STATUS "-3" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-3" },
+};
+
+static const struct gpio_led_platform_data simatic_ipc_gpio_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(simatic_ipc_gpio_leds),
+	.leds		= simatic_ipc_gpio_leds,
+};
+
+static struct platform_device *simatic_leds_pdev;
+
+static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
+{
+	gpiod_remove_lookup_table(&simatic_ipc_led_gpio_table);
+	platform_device_unregister(simatic_leds_pdev);
+
+	return 0;
+}
+
+static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_desc *gpiod;
+	int err;
+
+	gpiod_add_lookup_table(&simatic_ipc_led_gpio_table);
+	simatic_leds_pdev = platform_device_register_resndata(NULL,
+		"leds-gpio", PLATFORM_DEVID_NONE, NULL, 0,
+		&simatic_ipc_gpio_leds_pdata,
+		sizeof(simatic_ipc_gpio_leds_pdata));
+	if (IS_ERR(simatic_leds_pdev)) {
+		err = PTR_ERR(simatic_leds_pdev);
+		goto out;
+	}
+
+	/* PM_BIOS_BOOT_N */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 6, GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_put(gpiod);
+
+	/* PM_WDT_OUT */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 7, GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_put(gpiod);
+
+	return 0;
+out:
+	simatic_ipc_leds_gpio_remove(pdev);
+
+	return err;
+}
+
+static struct platform_driver simatic_ipc_led_gpio_driver = {
+	.probe = simatic_ipc_leds_gpio_probe,
+	.remove = simatic_ipc_leds_gpio_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+	}
+};
+module_platform_driver(simatic_ipc_led_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_SOFTDEP("pre: platform:leds-gpio");
+MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>");
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
index 078d43f5ba38..4894c228c165 100644
--- a/drivers/leds/simple/simatic-ipc-leds.c
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -23,7 +23,7 @@
 #define SIMATIC_IPC_LED_PORT_BASE	0x404E
 
 struct simatic_ipc_led {
-	unsigned int value; /* mask for io and offset for mem */
+	unsigned int value; /* mask for io */
 	char *name;
 	struct led_classdev cdev;
 };
@@ -38,21 +38,6 @@ static struct simatic_ipc_led simatic_ipc_leds_io[] = {
 	{ }
 };
 
-/* the actual start will be discovered with PCI, 0 is a placeholder */
-static struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);
-
-static void __iomem *simatic_ipc_led_memory;
-
-static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
-	{0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
-	{0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
-	{ }
-};
-
 static struct resource simatic_ipc_led_io_res =
 	DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME);
 
@@ -88,28 +73,6 @@ static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
 	return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness;
 }
 
-static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
-				    enum led_brightness brightness)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-	void __iomem *reg = simatic_ipc_led_memory + led->value;
-	u32 val;
-
-	val = readl(reg);
-	val = (val & ~1) | (brightness == LED_OFF);
-	writel(val, reg);
-}
-
-static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-	void __iomem *reg = simatic_ipc_led_memory + led->value;
-	u32 val;
-
-	val = readl(reg);
-	return (val & 1) ? LED_OFF : led_cd->max_brightness;
-}
-
 static int simatic_ipc_leds_probe(struct platform_device *pdev)
 {
 	const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
@@ -117,9 +80,7 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 	struct simatic_ipc_led *ipcled;
 	struct led_classdev *cdev;
 	struct resource *res;
-	void __iomem *reg;
-	int err, type;
-	u32 val;
+	int err;
 
 	switch (plat->devmode) {
 	case SIMATIC_IPC_DEVICE_227D:
@@ -134,52 +95,19 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 			}
 			ipcled = simatic_ipc_leds_io;
 		}
-		type = IORESOURCE_IO;
 		if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) {
 			dev_err(dev, "Unable to register IO resource at %pR\n", res);
 			return -EBUSY;
 		}
 		break;
-	case SIMATIC_IPC_DEVICE_127E:
-		res = &simatic_ipc_led_mem_res;
-		ipcled = simatic_ipc_leds_mem;
-		type = IORESOURCE_MEM;
-
-		/* get GPIO base from PCI */
-		res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
-		if (res->start == 0)
-			return -ENODEV;
-
-		/* do the final address calculation */
-		res->start = res->start + (0xC5 << 16);
-		res->end += res->start;
-
-		simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
-		if (IS_ERR(simatic_ipc_led_memory))
-			return PTR_ERR(simatic_ipc_led_memory);
-
-		/* initialize power/watchdog LED */
-		reg = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
-		val = readl(reg);
-		writel(val & ~1, reg);
-
-		reg = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
-		val = readl(reg);
-		writel(val | 1, reg);
-		break;
 	default:
 		return -ENODEV;
 	}
 
 	while (ipcled->value) {
 		cdev = &ipcled->cdev;
-		if (type == IORESOURCE_MEM) {
-			cdev->brightness_set = simatic_ipc_led_set_mem;
-			cdev->brightness_get = simatic_ipc_led_get_mem;
-		} else {
-			cdev->brightness_set = simatic_ipc_led_set_io;
-			cdev->brightness_get = simatic_ipc_led_get_io;
-		}
+		cdev->brightness_set = simatic_ipc_led_set_io;
+		cdev->brightness_get = simatic_ipc_led_get_io;
 		cdev->max_brightness = LED_ON;
 		cdev->name = ipcled->name;
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3b59456f5545..9566341de470 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -572,6 +572,7 @@ config LPC_ICH
 	tristate "Intel ICH LPC"
 	depends on PCI
 	select MFD_CORE
+	select P2SB if X86
 	help
 	  The LPC bridge function of the Intel ICH provides support for
 	  many functional units. This driver provides needed support for
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 9ffab9aafd81..650951f89f1c 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -8,7 +8,8 @@
  *  Configuration Registers.
  *
  *  This driver is derived from lpc_sch.
-
+ *
+ *  Copyright (c) 2017, 2021-2022 Intel Corporation
  *  Copyright (c) 2011 Extreme Engineering Solution, Inc.
  *  Author: Aaron Sierra <asierra@xes-inc.com>
  *
@@ -42,9 +43,11 @@
 #include <linux/errno.h>
 #include <linux/acpi.h>
 #include <linux/pci.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/lpc_ich.h>
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
 
 #define ACPIBASE		0x40
 #define ACPIBASE_GPE_OFF	0x28
@@ -71,8 +74,6 @@
 #define BCR			0xdc
 #define BCR_WPD			BIT(0)
 
-#define SPIBASE_APL_SZ		4096
-
 #define GPIOBASE_ICH0		0x58
 #define GPIOCTRL_ICH0		0x5C
 #define GPIOBASE_ICH6		0x48
@@ -143,6 +144,73 @@ static struct mfd_cell lpc_ich_gpio_cell = {
 	.ignore_resource_conflicts = true,
 };
 
+#define APL_GPIO_NORTH		0
+#define APL_GPIO_NORTHWEST	1
+#define APL_GPIO_WEST		2
+#define APL_GPIO_SOUTHWEST	3
+#define APL_GPIO_NR_DEVICES	4
+
+/* Offset data for Apollo Lake GPIO controllers */
+static resource_size_t apl_gpio_offsets[APL_GPIO_NR_DEVICES] = {
+	[APL_GPIO_NORTH]	= 0xc50000,
+	[APL_GPIO_NORTHWEST]	= 0xc40000,
+	[APL_GPIO_WEST]		= 0xc70000,
+	[APL_GPIO_SOUTHWEST]	= 0xc00000,
+};
+
+#define APL_GPIO_RESOURCE_SIZE		0x1000
+
+#define APL_GPIO_IRQ			14
+
+static struct resource apl_gpio_resources[APL_GPIO_NR_DEVICES][2] = {
+	[APL_GPIO_NORTH] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_NORTHWEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_WEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_SOUTHWEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+};
+
+static const struct mfd_cell apl_gpio_devices[APL_GPIO_NR_DEVICES] = {
+	[APL_GPIO_NORTH] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_NORTH,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTH]),
+		.resources = apl_gpio_resources[APL_GPIO_NORTH],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_NORTHWEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_NORTHWEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTHWEST]),
+		.resources = apl_gpio_resources[APL_GPIO_NORTHWEST],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_WEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_WEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_WEST]),
+		.resources = apl_gpio_resources[APL_GPIO_WEST],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_SOUTHWEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_SOUTHWEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_SOUTHWEST]),
+		.resources = apl_gpio_resources[APL_GPIO_SOUTHWEST],
+		.ignore_resource_conflicts = true,
+	},
+};
 
 static struct mfd_cell lpc_ich_spi_cell = {
 	.name = "intel-spi",
@@ -1086,6 +1154,34 @@ wdt_done:
 	return ret;
 }
 
+static int lpc_ich_init_pinctrl(struct pci_dev *dev)
+{
+	struct resource base;
+	unsigned int i;
+	int ret;
+
+	/* Check, if GPIO has been exported as an ACPI device */
+	if (acpi_dev_present("INT3452", NULL, -1))
+		return -EEXIST;
+
+	ret = p2sb_bar(dev->bus, 0, &base);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(apl_gpio_devices); i++) {
+		struct resource *mem = &apl_gpio_resources[i][0];
+		resource_size_t offset = apl_gpio_offsets[i];
+
+		/* Fill MEM resource */
+		mem->start = base.start + offset;
+		mem->end = base.start + offset + APL_GPIO_RESOURCE_SIZE - 1;
+		mem->flags = base.flags;
+	}
+
+	return mfd_add_devices(&dev->dev, 0, apl_gpio_devices,
+			       ARRAY_SIZE(apl_gpio_devices), NULL, 0, NULL);
+}
+
 static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
 {
 	u32 val;
@@ -1100,35 +1196,32 @@ static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
 	return val & BYT_BCR_WPD;
 }
 
-static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
+static bool lpc_ich_set_writeable(struct pci_bus *bus, unsigned int devfn)
 {
-	struct pci_dev *pdev = data;
 	u32 bcr;
 
-	pci_read_config_dword(pdev, BCR, &bcr);
+	pci_bus_read_config_dword(bus, devfn, BCR, &bcr);
 	if (!(bcr & BCR_WPD)) {
 		bcr |= BCR_WPD;
-		pci_write_config_dword(pdev, BCR, bcr);
-		pci_read_config_dword(pdev, BCR, &bcr);
+		pci_bus_write_config_dword(bus, devfn, BCR, bcr);
+		pci_bus_read_config_dword(bus, devfn, BCR, &bcr);
 	}
 
 	return bcr & BCR_WPD;
 }
 
-static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
 {
-	unsigned int spi = PCI_DEVFN(13, 2);
-	struct pci_bus *bus = data;
-	u32 bcr;
+	struct pci_dev *pdev = data;
 
-	pci_bus_read_config_dword(bus, spi, BCR, &bcr);
-	if (!(bcr & BCR_WPD)) {
-		bcr |= BCR_WPD;
-		pci_bus_write_config_dword(bus, spi, BCR, bcr);
-		pci_bus_read_config_dword(bus, spi, BCR, &bcr);
-	}
+	return lpc_ich_set_writeable(pdev->bus, pdev->devfn);
+}
 
-	return bcr & BCR_WPD;
+static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+{
+	struct pci_dev *pdev = data;
+
+	return lpc_ich_set_writeable(pdev->bus, PCI_DEVFN(13, 2));
 }
 
 static int lpc_ich_init_spi(struct pci_dev *dev)
@@ -1137,6 +1230,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 	struct resource *res = &intel_spi_res[0];
 	struct intel_spi_boardinfo *info;
 	u32 spi_base, rcba;
+	int ret;
 
 	info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -1167,30 +1261,19 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 		}
 		break;
 
-	case INTEL_SPI_BXT: {
-		unsigned int p2sb = PCI_DEVFN(13, 0);
-		unsigned int spi = PCI_DEVFN(13, 2);
-		struct pci_bus *bus = dev->bus;
-
+	case INTEL_SPI_BXT:
 		/*
 		 * The P2SB is hidden by BIOS and we need to unhide it in
 		 * order to read BAR of the SPI flash device. Once that is
 		 * done we hide it again.
 		 */
-		pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0);
-		pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0,
-					  &spi_base);
-		if (spi_base != ~0) {
-			res->start = spi_base & 0xfffffff0;
-			res->end = res->start + SPIBASE_APL_SZ - 1;
-
-			info->set_writeable = lpc_ich_bxt_set_writeable;
-			info->data = bus;
-		}
+		ret = p2sb_bar(dev->bus, PCI_DEVFN(13, 2), res);
+		if (ret)
+			return ret;
 
-		pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);
+		info->set_writeable = lpc_ich_bxt_set_writeable;
+		info->data = dev;
 		break;
-	}
 
 	default:
 		return -EINVAL;
@@ -1249,6 +1332,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
 			cell_added = true;
 	}
 
+	if (priv->chipset == LPC_APL) {
+		ret = lpc_ich_init_pinctrl(dev);
+		if (!ret)
+			cell_added = true;
+	}
+
 	if (lpc_chipset_info[priv->chipset].spi_type) {
 		ret = lpc_ich_init_spi(dev);
 		if (!ret)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index ffc045f7bf00..fd093e36c3a8 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1641,16 +1641,14 @@ EXPORT_SYMBOL_GPL(intel_pinctrl_probe_by_uid);
 
 const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_device *pdev)
 {
+	const struct intel_pinctrl_soc_data * const *table;
 	const struct intel_pinctrl_soc_data *data = NULL;
-	const struct intel_pinctrl_soc_data **table;
-	struct acpi_device *adev;
-	unsigned int i;
 
-	adev = ACPI_COMPANION(&pdev->dev);
-	if (adev) {
-		const void *match = device_get_match_data(&pdev->dev);
+	table = device_get_match_data(&pdev->dev);
+	if (table) {
+		struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+		unsigned int i;
 
-		table = (const struct intel_pinctrl_soc_data **)match;
 		for (i = 0; table[i]; i++) {
 			if (!strcmp(adev->pnp.unique_id, table[i]->uid)) {
 				data = table[i];
@@ -1664,7 +1662,7 @@ const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_
 		if (!id)
 			return ERR_PTR(-ENODEV);
 
-		table = (const struct intel_pinctrl_soc_data **)id->driver_data;
+		table = (const struct intel_pinctrl_soc_data * const *)id->driver_data;
 		data = table[pdev->id];
 	}
 
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 794968bda115..c9cfbaae436b 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -70,6 +70,18 @@ config INTEL_OAKTRAIL
 	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
 	  here; it will only load on supported platforms.
 
+config P2SB
+	bool "Primary to Sideband (P2SB) bridge access support"
+	depends on PCI
+	help
+	  The Primary to Sideband (P2SB) bridge is an interface to some
+	  PCI devices connected through it. In particular, SPI NOR controller
+	  in Intel Apollo Lake SoC is one of such devices.
+
+	  The main purpose of this library is to unhide P2SB device in case
+	  firmware kept it hidden on some platforms in order to access devices
+	  behind it.
+
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel Broxton Whiskey Cove TMU Driver"
 	depends on INTEL_SOC_PMIC_BXTWC
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 717933dd0cfd..741a9404db98 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -28,6 +28,8 @@ intel_int0002_vgpio-y			:= int0002_vgpio.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 intel_oaktrail-y			:= oaktrail.o
 obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
+intel_p2sb-y				:= p2sb.o
+obj-$(CONFIG_P2SB)			+= intel_p2sb.o
 intel_sdsi-y				:= sdsi.o
 obj-$(CONFIG_INTEL_SDSI)		+= intel_sdsi.o
 intel_vsec-y				:= vsec.o
diff --git a/drivers/platform/x86/intel/p2sb.c b/drivers/platform/x86/intel/p2sb.c
new file mode 100644
index 000000000000..fb2e141f3eb8
--- /dev/null
+++ b/drivers/platform/x86/intel/p2sb.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Primary to Sideband (P2SB) bridge access support
+ *
+ * Copyright (c) 2017, 2021-2022 Intel Corporation.
+ *
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *	    Jonathan Yong <jonathan.yong@intel.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/platform_data/x86/p2sb.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#define P2SBC			0xe0
+#define P2SBC_HIDE		BIT(8)
+
+static const struct x86_cpu_id p2sb_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	PCI_DEVFN(13, 0)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		PCI_DEVFN(31, 1)),
+	{}
+};
+
+static int p2sb_get_devfn(unsigned int *devfn)
+{
+	const struct x86_cpu_id *id;
+
+	id = x86_match_cpu(p2sb_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	*devfn = (unsigned int)id->driver_data;
+	return 0;
+}
+
+static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
+{
+	/* Copy resource from the first BAR of the device in question */
+	*mem = pdev->resource[0];
+	return 0;
+}
+
+static int p2sb_scan_and_read(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+	struct pci_dev *pdev;
+	int ret;
+
+	pdev = pci_scan_single_device(bus, devfn);
+	if (!pdev)
+		return -ENODEV;
+
+	ret = p2sb_read_bar0(pdev, mem);
+
+	pci_stop_and_remove_bus_device(pdev);
+	return ret;
+}
+
+/**
+ * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
+ * @bus: PCI bus to communicate with
+ * @devfn: PCI slot and function to communicate with
+ * @mem: memory resource to be filled in
+ *
+ * The BIOS prevents the P2SB device from being enumerated by the PCI
+ * subsystem, so we need to unhide and hide it back to lookup the BAR.
+ *
+ * if @bus is NULL, the bus 0 in domain 0 will be used.
+ * If @devfn is 0, it will be replaced by devfn of the P2SB device.
+ *
+ * Caller must provide a valid pointer to @mem.
+ *
+ * Locking is handled by pci_rescan_remove_lock mutex.
+ *
+ * Return:
+ * 0 on success or appropriate errno value on error.
+ */
+int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+	struct pci_dev *pdev_p2sb;
+	unsigned int devfn_p2sb;
+	u32 value = P2SBC_HIDE;
+	int ret;
+
+	/* Get devfn for P2SB device itself */
+	ret = p2sb_get_devfn(&devfn_p2sb);
+	if (ret)
+		return ret;
+
+	/* if @bus is NULL, use bus 0 in domain 0 */
+	bus = bus ?: pci_find_bus(0, 0);
+
+	/*
+	 * Prevent concurrent PCI bus scan from seeing the P2SB device and
+	 * removing via sysfs while it is temporarily exposed.
+	 */
+	pci_lock_rescan_remove();
+
+	/* Unhide the P2SB device, if needed */
+	pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value);
+	if (value & P2SBC_HIDE)
+		pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
+
+	pdev_p2sb = pci_scan_single_device(bus, devfn_p2sb);
+	if (devfn)
+		ret = p2sb_scan_and_read(bus, devfn, mem);
+	else
+		ret = p2sb_read_bar0(pdev_p2sb, mem);
+	pci_stop_and_remove_bus_device(pdev_p2sb);
+
+	/* Hide the P2SB device, if it was hidden */
+	if (value & P2SBC_HIDE)
+		pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, P2SBC_HIDE);
+
+	pci_unlock_rescan_remove();
+
+	if (ret)
+		return ret;
+
+	if (mem->flags == 0)
+		return -ENODEV;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(p2sb_bar);
diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index b599cda5ba3c..ca3647b751d5 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -51,6 +51,7 @@ static int register_platform_devices(u32 station_id)
 {
 	u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
 	u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
+	char *pdevname = KBUILD_MODNAME "_leds";
 	int i;
 
 	platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
@@ -64,10 +65,12 @@ static int register_platform_devices(u32 station_id)
 	}
 
 	if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
+		if (ledmode == SIMATIC_IPC_DEVICE_127E)
+			pdevname = KBUILD_MODNAME "_leds_gpio";
 		platform_data.devmode = ledmode;
 		ipc_led_platform_device =
 			platform_device_register_data(NULL,
-				KBUILD_MODNAME "_leds", PLATFORM_DEVID_NONE,
+				pdevname, PLATFORM_DEVID_NONE,
 				&platform_data,
 				sizeof(struct simatic_ipc_platform));
 		if (IS_ERR(ipc_led_platform_device))
@@ -101,44 +104,6 @@ static int register_platform_devices(u32 station_id)
 	return 0;
 }
 
-/* FIXME: this should eventually be done with generic P2SB discovery code
- * the individual drivers for watchdogs and LEDs access memory that implements
- * GPIO, but pinctrl will not come up because of missing ACPI entries
- *
- * While there is no conflict a cleaner solution would be to somehow bring up
- * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl.
- * After which the following function could be dropped, together with the code
- * poking the memory.
- */
-/*
- * Get membase address from PCI, used in leds and wdt module. Here we read
- * the bar0. The final address calculation is done in the appropriate modules
- */
-u32 simatic_ipc_get_membase0(unsigned int p2sb)
-{
-	struct pci_bus *bus;
-	u32 bar0 = 0;
-	/*
-	 * The GPIO memory is in bar0 of the hidden P2SB device.
-	 * Unhide the device to have a quick look at it, before we hide it
-	 * again.
-	 * Also grab the pci rescan lock so that device does not get discovered
-	 * and remapped while it is visible.
-	 * This code is inspired by drivers/mfd/lpc_ich.c
-	 */
-	bus = pci_find_bus(0, 0);
-	pci_lock_rescan_remove();
-	pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
-	pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0);
-
-	bar0 &= ~0xf;
-	pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
-	pci_unlock_rescan_remove();
-
-	return bar0;
-}
-EXPORT_SYMBOL(simatic_ipc_get_membase0);
-
 static int __init simatic_ipc_init_module(void)
 {
 	const struct dmi_system_id *match;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..0796f6a9e8ff 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1647,6 +1647,7 @@ config SIEMENS_SIMATIC_IPC_WDT
 	tristate "Siemens Simatic IPC Watchdog"
 	depends on SIEMENS_SIMATIC_IPC
 	select WATCHDOG_CORE
+	select P2SB
 	help
 	  This driver adds support for several watchdogs found in Industrial
 	  PCs from Siemens.
diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c
index 8bac793c63fb..6599695dc672 100644
--- a/drivers/watchdog/simatic-ipc-wdt.c
+++ b/drivers/watchdog/simatic-ipc-wdt.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/platform_data/x86/simatic-ipc-base.h>
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
@@ -54,9 +55,9 @@ static struct resource io_resource_trigger =
 	DEFINE_RES_IO_NAMED(WD_TRIGGER_IOADR, SZ_1,
 			    KBUILD_MODNAME " WD_TRIGGER_IOADR");
 
-/* the actual start will be discovered with pci, 0 is a placeholder */
+/* the actual start will be discovered with p2sb, 0 is a placeholder */
 static struct resource mem_resource =
-	DEFINE_RES_MEM_NAMED(0, SZ_4, "WD_RESET_BASE_ADR");
+	DEFINE_RES_MEM_NAMED(0, 0, "WD_RESET_BASE_ADR");
 
 static u32 wd_timeout_table[] = {2, 4, 6, 8, 16, 32, 48, 64 };
 static void __iomem *wd_reset_base_addr;
@@ -150,6 +151,7 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
 	struct simatic_ipc_platform *plat = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
 	struct resource *res;
+	int ret;
 
 	switch (plat->devmode) {
 	case SIMATIC_IPC_DEVICE_227E:
@@ -190,15 +192,14 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
 	if (plat->devmode == SIMATIC_IPC_DEVICE_427E) {
 		res = &mem_resource;
 
-		/* get GPIO base from PCI */
-		res->start = simatic_ipc_get_membase0(PCI_DEVFN(0x1f, 1));
-		if (res->start == 0)
-			return -ENODEV;
+		ret = p2sb_bar(NULL, 0, res);
+		if (ret)
+			return ret;
 
 		/* do the final address calculation */
 		res->start = res->start + (GPIO_COMMUNITY0_PORT_ID << 16) +
 			     PAD_CFG_DW0_GPP_A_23;
-		res->end += res->start;
+		res->end = res->start + SZ_4 - 1;
 
 		wd_reset_base_addr = devm_ioremap_resource(dev, res);
 		if (IS_ERR(wd_reset_base_addr))
diff --git a/include/linux/platform_data/x86/p2sb.h b/include/linux/platform_data/x86/p2sb.h
new file mode 100644
index 000000000000..a1d5fddc8f13
--- /dev/null
+++ b/include/linux/platform_data/x86/p2sb.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Primary to Sideband (P2SB) bridge access support
+ */
+
+#ifndef _PLATFORM_DATA_X86_P2SB_H
+#define _PLATFORM_DATA_X86_P2SB_H
+
+#include <linux/errno.h>
+#include <linux/kconfig.h>
+
+struct pci_bus;
+struct resource;
+
+#if IS_BUILTIN(CONFIG_P2SB)
+
+int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem);
+
+#else /* CONFIG_P2SB */
+
+static inline int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_P2SB is not set */
+
+#endif /* _PLATFORM_DATA_X86_P2SB_H */
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
index 62d2bc774067..39fefd48cf4d 100644
--- a/include/linux/platform_data/x86/simatic-ipc-base.h
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -24,6 +24,4 @@ struct simatic_ipc_platform {
 	u8	devmode;
 };
 
-u32 simatic_ipc_get_membase0(unsigned int p2sb);
-
 #endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */