diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-16 16:27:35 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-16 16:27:35 -0800 |
| commit | 9805529ec544ea7a82d891d5239a8ebd3dbb2a3e (patch) | |
| tree | d6b662fbd24e0be9623dab6a34e9f269462ab36b | |
| parent | Merge tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
| parent | Merge branch 'sparx5-next' of https://github.com/microchip-ung/linux-upstream into arm/dt (diff) | |
| download | linux-dev-9805529ec544ea7a82d891d5239a8ebd3dbb2a3e.tar.xz linux-dev-9805529ec544ea7a82d891d5239a8ebd3dbb2a3e.zip | |
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
589 files changed, 36063 insertions, 2955 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml new file mode 100644 index 000000000000..5fec063d9a13 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 device tree bindings + +description: + Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs. + +maintainers: + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4906 based boards + items: + - const: brcm,bcm4906 + - const: brcm,bcm4908 + + - description: BCM4908 based boards + items: + - enum: + - asus,gt-ac5300 + - const: brcm,bcm4908 + + - description: BCM49408 based boards + items: + - const: brcm,bcm49408 + - const: brcm,bcm4908 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 6064d98b1031..395359dc94fd 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -89,7 +89,10 @@ Required properties: "fsl,imx8qm-clock" "fsl,imx8qxp-clock" followed by "fsl,scu-clk" -- #clock-cells: Should be 1. Contains the Clock ID value. +- #clock-cells: Should be either + 2: Contains the Resource and Clock ID value. + or + 1: Contains the Clock ID value. (DEPRECATED) - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" @@ -208,7 +211,7 @@ firmware { clk: clk { compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; - #clock-cells = <1>; + #clock-cells = <2>; }; iomuxc { @@ -263,8 +266,7 @@ serial@5a060000 { ... pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; - clocks = <&clk IMX8QXP_UART0_CLK>, - <&clk IMX8QXP_UART0_IPG_CLK>; - clock-names = "per", "ipg"; + clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; + clock-names = "ipg"; power-domains = <&pd IMX_SC_R_UART_0>; }; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 934289446abb..34000f7fbe02 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -33,16 +33,57 @@ properties: items: - enum: - fsl,imx25-pdk + - karo,imx25-tx25 - const: fsl,imx25 - - description: i.MX27 Product Development Kit + - description: i.MX25 Eukrea CPUIMX25 Boards + items: + - enum: + - eukrea,mbimxsd25-baseboard # Eukrea MBIMXSD25 + - const: eukrea,cpuimx25 + - const: fsl,imx25 + + - description: i.MX25 Eukrea MBIMXSD25 Boards + items: + - enum: + - eukrea,mbimxsd25-baseboard-cmo-qvga + - eukrea,mbimxsd25-baseboard-dvi-svga + - eukrea,mbimxsd25-baseboard-dvi-vga + - const: eukrea,mbimxsd25-baseboard + - const: eukrea,cpuimx25 + - const: fsl,imx25 + + - description: i.MX27 based Boards items: - enum: - armadeus,imx27-apf27 # APF27 SoM - - armadeus,imx27-apf27dev # APF27 SoM on APF27Dev board - fsl,imx27-pdk - const: fsl,imx27 + - description: i.MX27 APF27 SoM Board + items: + - const: armadeus,imx27-apf27dev + - const: armadeus,imx27-apf27 + - const: fsl,imx27 + + - description: i.MX27 Eukrea CPUIMX27 SoM Board + items: + - const: eukrea,mbimxsd27-baseboard + - const: eukrea,cpuimx27 + - const: fsl,imx27 + + - description: i.MX27 Phytec pca100 Board + items: + - const: phytec,imx27-pca100-rdk + - const: phytec,imx27-pca100 + - const: fsl,imx27 + + - description: i.MX27 Phytec pcm970 Board + items: + - const: phytec,imx27-pcm970 + - const: phytec,imx27-pcm038 + - const: fsl,imx27 + - description: i.MX28 based Boards items: - enum: @@ -88,13 +129,33 @@ properties: - kobo,aura - const: fsl,imx50 - - description: i.MX51 Babbage Board + - description: i.MX51 based Boards items: - enum: - - armadeus,imx51-apf51 # APF51 SoM - - armadeus,imx51-apf51dev # APF51 SoM on APF51Dev board + - armadeus,imx51-apf51 # Armadeus Systems APF51 module - fsl,imx51-babbage - technologic,imx51-ts4800 + - zii,imx51-scu3-esb + - zii,imx51-scu2-mezz + - zii,imx51-rdu1 + - const: fsl,imx51 + + - description: i.MX51 based Armadeus Systems APF51Dev Board + items: + - const: armadeus,imx51-apf51dev + - const: armadeus,imx51-apf51 + - const: fsl,imx51 + + - description: i.MX51 based Digi ConnectCore CC(W)-MX51 JSK Board + items: + - const: digi,connectcore-ccxmx51-jsk + - const: digi,connectcore-ccxmx51-som + - const: fsl,imx51 + + - description: i.MX51 based Eukrea CPUIMX51 Board + items: + - const: eukrea,mbimxsd51 + - const: eukrea,cpuimx51 - const: fsl,imx51 - description: i.MX53 based Boards @@ -104,36 +165,111 @@ properties: - fsl,imx53-ard - fsl,imx53-evk - fsl,imx53-qsb + - fsl,imx53-qsrb # Freescale i.MX53 Quick Start-R Board - fsl,imx53-smd + - ge,imx53-cpuvo # General Electric CS ONE + - inversepath,imx53-usbarmory # Inverse Path USB armory + - karo,tx53 # Ka-Ro electronics TX53 module + - kiebackpeter,imx53-ddc # K+P imx53 DDC + - kiebackpeter,imx53-hsc # K+P imx53 HSC - menlo,m53menlo + - voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668 + - const: fsl,imx53 + + - description: i.MX53 based Aries/DENX M53EVK Board + items: + - const: aries,imx53-m53evk + - const: denx,imx53-m53evk + - const: fsl,imx53 + + - description: i.MX53 based TQ MBa53 Board + items: + - const: tq,mba53 + - const: tq,tqma53 - const: fsl,imx53 - description: i.MX6Q based Boards items: - enum: - - armadeus,imx6q-apf6 # APF6 (Quad/Dual) SoM - - armadeus,imx6q-apf6dev # APF6 (Quad/Dual) SoM on APF6Dev board + - auvidea,h100 # Auvidea H100 + - boundary,imx6q-nitrogen6_max + - boundary,imx6q-nitrogen6_som2 + - boundary,imx6q-nitrogen6x + - compulab,cm-fx6 # CompuLab CM-FX6 + - dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board + - embest,imx6q-marsboard # Embest MarS Board i.MX6Dual - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base + - engicam,imx6-icore # Engicam i.CoreM6 Starter Kit + - engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit - fsl,imx6q-arm2 - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - karo,imx6q-tx6q # Ka-Ro electronics TX6Q Modules + - kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board - kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module + - kosagi,imx6q-novena # Kosagi Novena Dual/Quad - logicpd,imx6q-logicpd + - lwn,display5 # Liebherr Display5 i.MX6 Quad Board + - lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board + - nutsboard,imx6q-pistachio # NutsBoard i.MX6 Quad Pistachio + - microsys,sbc6x # MicroSys sbc6x board + - poslab,imx6q-savageboard # Poslab SavageBoard Quad - prt,prti6q # Protonic PRTI6Q board - prt,prtwd2 # Protonic WD2 board + - rex,imx6q-rex-pro # Rex Pro i.MX6 Quad Board + - solidrun,cubox-i/q # SolidRun Cubox-i Dual/Quad + - solidrun,hummingboard/q + - solidrun,hummingboard2/q + - tbs,imx6q-tbs2910 # TBS2910 Matrix ARM mini PC - technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf - technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit - technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - - toradex,apalis_imx6q # Apalis iMX6 Module - - toradex,apalis_imx6q-eval # Apalis iMX6 Module on Apalis Evaluation Board - - toradex,apalis_imx6q-ixora # Apalis iMX6 Module on Ixora - - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6 Module on Ixora V1.1 + - toradex,apalis_imx6q # Apalis iMX6 Module + - udoo,imx6q-udoo # Udoo i.MX6 Quad Board + - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard + - wand,imx6q-wandboard # Wandboard i.MX6 Quad Board + - zealz,imx6q-gk802 # Zealz GK802 + - zii,imx6q-zii-rdu2 # ZII RDU2 Board + - const: fsl,imx6q + + - description: i.MX6Q Advantech DMS-BA16 Boards + items: + - enum: + - advantech,imx6q-dms-ba16 # Advantech DMS-BA16 + - ge,imx6q-b450v3 # General Electric B450v3 + - ge,imx6q-b650v3 # General Electric B650v3 + - ge,imx6q-b850v3 # General Electric B850v3 + - const: advantech,imx6q-ba16 + - const: fsl,imx6q + + - description: i.MX6Q Armadeus APF6 Boards + items: + - const: armadeus,imx6q-apf6dev + - const: armadeus,imx6q-apf6 + - const: fsl,imx6q + + - description: i.MX6Q CompuLab Utilite Pro Board + items: + - const: compulab,utilite-pro + - const: compulab,cm-fx6 + - const: fsl,imx6q + + - description: i.MX6Q DFI FS700-M60-6QD Board + items: + - const: dfi,fs700-m60-6qd + - const: dfi,fs700e-m60 + - const: fsl,imx6q + + - description: i.MX6Q DHCOM Premium Developer Kit Board + items: + - const: dh,imx6q-dhcom-pdk2 + - const: dh,imx6q-dhcom-som - const: fsl,imx6q - description: i.MX6Q Gateworks Ventana Boards @@ -172,11 +308,32 @@ properties: - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6q + - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module + items: + - enum: + - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board + - const: toradex,apalis_imx6q + - const: fsl,imx6q + + - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1 + items: + - const: toradex,apalis_imx6q-ixora-v1.1 + - const: toradex,apalis_imx6q-ixora + - const: toradex,apalis_imx6q + - const: fsl,imx6q + - description: i.MX6QP based Boards items: - enum: + - boundary,imx6qp-nitrogen6_max + - boundary,imx6qp-nitrogen6_som2 - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board + - karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module + - prt,prtwd3 # Protonic WD3 board + - wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board + - zii,imx6qp-zii-rdu2 # ZII RDU2+ Board - const: fsl,imx6qp - description: i.MX6QP PHYTEC phyBOARD-Mira @@ -189,32 +346,59 @@ properties: - description: i.MX6DL based Boards items: - enum: - - armadeus,imx6dl-apf6 # APF6 (Solo) SoM - - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board + - abb,aristainetos-imx6dl-4 # aristainetos i.MX6 Dual Lite Board 4 + - abb,aristainetos-imx6dl-7 # aristainetos i.MX6 Dual Lite Board 7 + - abb,aristainetos2-imx6dl-4 # aristainetos2 i.MX6 Dual Lite Board 4 + - abb,aristainetos2-imx6dl-7 # aristainetos2 i.MX6 Dual Lite Board 7 + - alt,alti6p # Altesco I6P Board + - boundary,imx6dl-nit6xlite # Boundary Devices Nitrogen6 Lite + - boundary,imx6dl-nitrogen6x # Boundary Devices Nitrogen6x + - bticino,imx6dl-mamoj # BTicino i.MX6DL Mamoj - eckelmann,imx6dl-ci4x10 - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base + - engicam,imx6-icore # Engicam i.CoreM6 Starter Kit + - engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board + - fsl,imx6dl-sabrelite # i.MX6 DualLite SABRE Lite Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules - kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module + - poslab,imx6dl-savageboard # Poslab SavageBoard Dual - prt,prtrvt # Protonic RVT board - prt,prtvt7 # Protonic VT7 board + - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board + - riot,imx6s-riotboard # RIoTboard i.MX6S + - solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite + - solidrun,hummingboard/dl + - solidrun,hummingboard2/dl # SolidRun HummingBoard2 Solo/DualLite - technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf - technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit - technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - - toradex,colibri_imx6dl # Colibri iMX6 Module - - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3 - - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3 + - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board + - vdl,lanmcu # Van der Laan LANMCU board + - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board - ysoft,imx6dl-yapp4-orion # i.MX6 DualLite Y Soft IOTA Orion board - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board - const: fsl,imx6dl + - description: i.MX6DL based Armadeus AFP6 Board + items: + - const: armadeus,imx6dl-apf6dev + - const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM + - const: fsl,imx6dl + + - description: i.MX6DL based DFI FS700-M60-6DL Board + items: + - const: dfi,fs700-m60-6dl + - const: dfi,fs700e-m60 + - const: fsl,imx6dl + - description: i.MX6DL Gateworks Ventana Boards items: - enum: @@ -250,12 +434,29 @@ properties: - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6dl + - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri + Evaluation Board V3 + items: + - const: toradex,colibri_imx6dl-eval-v3 + - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - const: fsl,imx6dl + + - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri + Evaluation Board V3 + items: + - const: toradex,colibri_imx6dl-v1_1-eval-v3 + - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 + - const: toradex,colibri_imx6dl-eval-v3 + - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - const: fsl,imx6dl + - description: i.MX6SL based Boards items: - enum: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board - kobo,tolino-shine2hd - kobo,tolino-shine3 + - revotics,imx6sl-warp # Revotics WaRP Board - const: fsl,imx6sl - description: i.MX6SLL based Boards @@ -268,17 +469,23 @@ properties: - description: i.MX6SX based Boards items: - enum: + - boundary,imx6sx-nitrogen6sx - fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board - fsl,imx6sx-sdb # i.MX6 SoloX SDB Board - fsl,imx6sx-sdb-reva # i.MX6 SoloX SDB Rev-A Board + - samtec,imx6sx-vining-2000 # Softing VIN|ING 2000 Board + - udoo,neobasic # UDOO Neo Basic Board + - udoo,neoextended # UDOO Neo Extended + - udoo,neofull # UDOO Neo Full - const: fsl,imx6sx - description: i.MX6UL based Boards items: - enum: - - armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM - - armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board + - engicam,imx6ul-geam # Engicam GEAM6UL Starter Kit + - engicam,imx6ul-isiot # Engicam Is.IoT MX6UL eMMC/NAND Starter kit - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf @@ -286,6 +493,26 @@ properties: - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi - const: fsl,imx6ul + - description: i.MX6UL Armadeus Systems OPOS6UL SoM Board + items: + - const: armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board + - const: armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM + - const: fsl,imx6ul + + - description: i.MX6UL Digi International ConnectCore 6UL Boards + items: + - enum: + - digi,ccimx6ulsbcexpress # Digi International ConnectCore 6UL SBC Express + - digi,ccimx6ulsbcpro # Digi International ConnectCore 6UL SBC Pro + - const: digi,ccimx6ulsom + - const: fsl,imx6ul + + - description: i.MX6UL Grinn liteBoard + items: + - const: grinn,imx6ul-liteboard + - const: grinn,imx6ul-litesom + - const: fsl,imx6ul + - description: i.MX6UL PHYTEC phyBOARD-Segin items: - enum: @@ -317,8 +544,6 @@ properties: - description: i.MX6ULL based Boards items: - enum: - - armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM - - armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board @@ -326,6 +551,12 @@ properties: - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board - const: fsl,imx6ull + - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board + items: + - const: armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board + - const: armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -351,17 +582,32 @@ properties: - description: i.MX7S based Boards items: - enum: - - toradex,colibri-imx7s # Colibri iMX7 Solo Module - - toradex,colibri-imx7s-aster # Colibri iMX7 Solo Module on Aster Carrier Board - - toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3 - - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM + - element14,imx7s-warp # Element14 Warp i.MX7 Board + - const: fsl,imx7s + + - description: i.MX7S Boards with Toradex Colibri iMX7S Module + items: + - enum: + - toradex,colibri-imx7s-aster # Module on Aster Carrier Board + - toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7s + - const: fsl,imx7s + + - description: TQ-Systems TQMa7S SoM on MBa7x board + items: + - const: tq,imx7s-mba7 + - const: tq,imx7s-tqma7 - const: fsl,imx7s - description: i.MX7D based Boards items: - enum: + - boundary,imx7d-nitrogen7 + - compulab,cl-som-imx7 # CompuLab CL-SOM-iMX7 - fsl,imx7d-sdb # i.MX7 SabreSD Board - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board + - kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator + - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit @@ -376,11 +622,16 @@ properties: # Colibri Evaluation Board V3 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on # Colibri Evaluation Board V3 - - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d + - description: TQ-Systems TQMa7D SoM on MBa7x board + items: + - const: tq,imx7d-mba7 + - const: tq,imx7d-tqma7 + - const: fsl,imx7d + - description: Compulab SBC-iMX7 is a single board computer based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with @@ -392,6 +643,22 @@ properties: - const: compulab,cl-som-imx7 - const: fsl,imx7d + - description: i.MX7D Boards with Toradex Colibri i.MX7D Module + items: + - enum: + - toradex,colibri-imx7d-aster # Module on Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7d + - const: fsl,imx7d + + - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module + items: + - enum: + - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board + - toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7d-emmc + - const: fsl,imx7d + - description: i.MX7ULP based Boards items: - enum: @@ -405,9 +672,16 @@ properties: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm + - description: Kontron BL i.MX8MM (N801X S) Board + items: + - const: kontron,imx8mm-n801x-s + - const: kontron,imx8mm-n801x-som + - const: fsl,imx8mm + - description: Variscite VAR-SOM-MX8MM based boards items: - const: variscite,var-som-mx8mm-symphony @@ -491,10 +765,26 @@ properties: - fsl,vf600 - fsl,vf610 - fsl,vf610m4 - - toradex,vf500-colibri_vf50 # Colibri VF50 Module - - toradex,vf500-colibri_vf50-on-eval # Colibri VF50 Module on Colibri Evaluation Board - - toradex,vf610-colibri_vf61 # Colibri VF61 Module - - toradex,vf610-colibri_vf61-on-eval # Colibri VF61 Module on Colibri Evaluation Board + + - description: Toradex Colibri VF50 Module on Colibri Evaluation Board + items: + - const: toradex,vf500-colibri_vf50-on-eval + - const: toradex,vf500-colibri_vf50 + - const: fsl,vf500 + + - description: VF610 based Boards + items: + - enum: + - lwn,bk4 # Liebherr BK4 controller + - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board + - fsl,vf610-twr # VF610 Tower Board + - const: fsl,vf610 + + - description: Toradex Colibri VF61 Module on Colibri Evaluation Board + items: + - const: toradex,vf610-colibri_vf61-on-eval + - const: toradex,vf610-colibri_vf61 + - const: fsl,vf610 - description: ZII's VF610 based Boards items: @@ -515,6 +805,7 @@ properties: - ebs-systart,oxalis - fsl,ls1012a-rdb - fsl,ls1012a-frdm + - fsl,ls1012a-frwy - fsl,ls1012a-qds - const: fsl,ls1012a @@ -613,6 +904,15 @@ properties: - enum: - fsl,lx2160a-qds - fsl,lx2160a-rdb + - fsl,lx2162a-qds + - const: fsl,lx2160a + + - description: SolidRun LX2160A based Boards + items: + - enum: + - solidrun,clearfog-cx + - solidrun,honeycomb + - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a - description: S32V234 based Boards diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index f736e8c859fa..53f0d4e3ea98 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,10 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - items: + - enum: + - mediatek,mt8167-pumpkin + - const: mediatek,mt8167 - description: Google Elm (Acer Chromebook R13) items: - const: google,elm-rev8 diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml new file mode 100644 index 000000000000..599c65980f5d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 thingy.jp. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MStar/SigmaStar Armv7 SoC SMP control registers + +maintainers: + - Daniel Palmer <daniel@thingy.jp> + +description: | + MStar/SigmaStar's Armv7 SoCs that have more than one processor + have a region of registers that allow setting the boot address + and a magic number that allows secondary processors to leave + the loop they are parked in by the boot ROM. + +properties: + compatible: + items: + - enum: + - sstar,ssd201-smpctrl # SSD201/SSD202D + - const: mstar,smpctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smpctrl@204000 { + compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl"; + reg = <0x204000 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml index 7c787405bb2f..61d08c473eb8 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml @@ -20,6 +20,12 @@ properties: - thingyjp,breadbee-crust # thingy.jp BreadBee Crust - const: mstar,infinity + - description: infinity2m boards + items: + - enum: + - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit + - const: mstar,infinity2m + - description: infinity3 boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index ff94c45eefb0..fe11be65039a 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -245,6 +245,7 @@ properties: - enum: - renesas,r8a7795 - renesas,r8a7796 + - renesas,r8a77961 - renesas,r8a77965 - description: R-Car M3-N (R8A77965) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index b621752aaa65..ef4544ad6f82 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -70,6 +70,24 @@ properties: - const: elgin,rv1108-r1 - const: rockchip,rv1108 + - description: Engicam PX30.Core C.TOUCH 2.0 + items: + - const: engicam,px30-core-ctouch2 + - const: engicam,px30-core + - const: rockchip,px30 + + - description: Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame + items: + - const: engicam,px30-core-ctouch2-of10 + - const: engicam,px30-core + - const: rockchip,px30 + + - description: Engicam PX30.Core EDIMM2.2 Starter Kit + items: + - const: engicam,px30-core-edimm2.2 + - const: engicam,px30-core + - const: rockchip,px30 + - description: Firefly Firefly-RK3288 items: - enum: @@ -381,6 +399,11 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Kobol Helios64 + items: + - const: kobol,helios64 + - const: rockchip,rk3399 + - description: Mecer Xtreme Mini S6 items: - const: mecer,xms6 diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 272508010b02..0796f0c87727 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -14,6 +14,19 @@ properties: const: '/' compatible: oneOf: + - description: S3C2416 based boards + items: + - enum: + - samsung,smdk2416 # Samsung SMDK2416 + - const: samsung,s3c2416 + + - description: S3C6410 based boards + items: + - enum: + - friendlyarm,mini6410 # FriendlyARM Mini6410 + - samsung,smdk6410 # Samsung SMDK6410 + - const: samsung,s3c6410 + - description: S5PV210 based boards items: - enum: @@ -83,6 +96,14 @@ properties: - const: samsung,exynos4412 - const: samsung,exynos4 + - description: Samsung p4note family boards + items: + - enum: + - samsung,n8010 # Samsung GT-N8010/GT-N8013 + - const: samsung,p4note + - const: samsung,exynos4412 + - const: samsung,exynos4 + - description: Exynos5250 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index 6634b3e0853e..149afb5df5af 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -21,6 +21,10 @@ properties: - st,stm32-power-config - st,stm32-tamp - const: syscon + - items: + - const: st,stm32-tamp + - const: syscon + - const: simple-mfd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 009b424e456e..e7525a3395e5 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -14,6 +14,20 @@ properties: const: "/" compatible: oneOf: + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - dh,stm32mp153c-dhcom-drc02 + - dh,stm32mp157c-dhcom-pdk2 + - dh,stm32mp157c-dhcom-picoitx + - enum: + - dh,stm32mp153c-dhcom-som + - dh,stm32mp157a-dhcor-som + - dh,stm32mp157c-dhcom-som + - enum: + - st,stm32mp153 + - st,stm32mp157 - items: - enum: - st,stm32f429i-disco @@ -39,8 +53,6 @@ properties: - const: st,stm32h743 - items: - enum: - - arrow,stm32mp157a-avenger96 # Avenger96 - - lxa,stm32mp157c-mc1 - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 @@ -52,6 +64,13 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: Octavo OSD32MP15x System-in-Package based boards + items: + - enum: + - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - const: oct,stm32mp15xx-osd32 + - enum: + - st,stm32mp157 - description: Odyssey STM32MP1 SoM based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index cab8e1b6417b..6db32fbf813f 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -201,6 +201,19 @@ properties: - const: dserve,dsrv9703c - const: allwinner,sun4i-a10 + - description: Elimo Engineering Impetus SoM + items: + - const: elimo,impetus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + + - description: Elimo Engineering Initium + items: + - const: elimo,initium + - const: elimo,impetus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + - description: Empire Electronix D709 Tablet items: - const: empire-electronix,d709 @@ -251,6 +264,16 @@ properties: - const: friendlyarm,nanopi-neo-plus2 - const: allwinner,sun50i-h5 + - description: FriendlyARM NanoPi R1 + items: + - const: friendlyarm,nanopi-r1 + - const: allwinner,sun8i-h3 + + - description: FriendlyARM ZeroPi + items: + - const: friendlyarm,zeropi + - const: allwinner,sun8i-h3 + - description: Gemei G9 Tablet items: - const: gemei,g9 diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 767e86354c8e..c5fbf869aa93 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -72,6 +72,9 @@ properties: - const: asus,grouper - const: nvidia,tegra30 - items: + - const: ouya,ouya + - const: nvidia,tegra30 + - items: - enum: - nvidia,dalmore - nvidia,roth diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt deleted file mode 100644 index 3108d03802ee..000000000000 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt +++ /dev/null @@ -1,44 +0,0 @@ -NVIDIA Tegra ACONNECT Bus - -The Tegra ACONNECT bus is an AXI switch which is used to connnect various -components inside the Audio Processing Engine (APE). All CPU accesses to -the APE subsystem go through the ACONNECT via an APB to AXI wrapper. - -Required properties: -- compatible: Must be "nvidia,tegra210-aconnect". -- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE), - and APE interface clock (TEGRA210_CLK_APB2APE). -- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding - 'clocks' entries. -- power-domains: Must contain a phandle that points to the audio powergate - (namely 'aud') for Tegra210. -- #address-cells: The number of cells used to represent physical base addresses - in the aconnect address space. Should be 1. -- #size-cells: The number of cells used to represent the size of an address - range in the aconnect address space. Should be 1. -- ranges: Mapping of the aconnect address space to the CPU address space. - -All devices accessed via the ACONNNECT are described by child-nodes. - -Example: - - aconnect@702c0000 { - compatible = "nvidia,tegra210-aconnect"; - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - clock-names = "ape", "apb2ape"; - power-domains = <&pd_audio>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; - - - child1 { - ... - }; - - child2 { - ... - }; - }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml new file mode 100644 index 000000000000..7b1a08c62aef --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra ACONNECT Bus + +description: | + The Tegra ACONNECT bus is an AXI switch which is used to connnect various + components inside the Audio Processing Engine (APE). All CPU accesses to + the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All + devices accessed via the ACONNNECT are described by child-nodes. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-aconnect + - items: + - enum: + - nvidia,tegra186-aconnect + - nvidia,tegra194-aconnect + - const: nvidia,tegra210-aconnect + + clocks: + items: + - description: Must contain the entry for APE clock + - description: Must contain the entry for APE interface clock + + clock-names: + items: + - const: ape + - const: apb2ape + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "@[0-9a-f]+$": + type: object + +required: + - compatible + - clocks + - clock-names + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include<dt-bindings/clock/tegra210-car.h> + + aconnect@702c0000 { + compatible = "nvidia,tegra210-aconnect"; + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&pd_audio>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702c0000 0x702c0000 0x00040000>; + + // Child device nodes follow ... + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 33f3010f48c3..e709e530e17a 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -21,27 +21,58 @@ description: | The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See the full list of clock IDs from: - include/dt-bindings/clock/imx8-clock.h + include/dt-bindings/clock/imx8-lpcg.h properties: compatible: - enum: - - fsl,imx8qxp-lpcg-adma - - fsl,imx8qxp-lpcg-conn - - fsl,imx8qxp-lpcg-dc - - fsl,imx8qxp-lpcg-dsp - - fsl,imx8qxp-lpcg-gpu - - fsl,imx8qxp-lpcg-hsio - - fsl,imx8qxp-lpcg-img - - fsl,imx8qxp-lpcg-lsio - - fsl,imx8qxp-lpcg-vpu - + oneOf: + - const: fsl,imx8qxp-lpcg + - items: + - enum: + - fsl,imx8qm-lpcg + - const: fsl,imx8qxp-lpcg + - enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + deprecated: true reg: maxItems: 1 '#clock-cells': const: 1 + clocks: + description: | + Input parent clocks phandle array for each clock + minItems: 1 + maxItems: 8 + + clock-indices: + description: | + An integer array indicating the bit offset for each clock. + Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the + supported LPCG clock indices. + minItems: 1 + maxItems: 8 + + clock-output-names: + description: | + Shall be the corresponding names of the outputs. + NOTE this property must be specified in the same order + as the clock-indices property. + minItems: 1 + maxItems: 8 + + power-domains: + maxItems: 1 + required: - compatible - reg @@ -51,23 +82,33 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; #clock-cells = <1>; + clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, + <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; }; mmc@5b010000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>; clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 62781518aefc..a84464b3e1f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -93,6 +93,24 @@ properties: - device - dual + typec-power-opmode: + description: Determines the power operation mode that the Type C connector + will support and will advertise through CC pins when it has no power + delivery support. + - "default" corresponds to default USB voltage and current defined by the + USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and + 5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane + operation respectively. + - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB + Type-C Cable and Connector specification, when Power Delivery is not + supported. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - default + - 1.5A + - 3.0A + # The following are optional properties for "usb-c-connector" with power # delivery support. source-pdos: @@ -192,6 +210,12 @@ allOf: type: const: micro +anyOf: + - not: + required: + - typec-power-opmode + - new-source-frs-typec-current + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt deleted file mode 100644 index 245d3063715c..000000000000 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt +++ /dev/null @@ -1,56 +0,0 @@ -* NVIDIA Tegra Audio DMA (ADMA) controller - -The Tegra Audio DMA controller that is used for transferring data -between system memory and the Audio Processing Engine (APE). - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra210-adma": for Tegra210 - - "nvidia,tegra186-adma": for Tegra186 and Tegra194 -- reg: Should contain DMA registers location and length. This should be - a single entry that includes all of the per-channel registers in one - contiguous bank. -- interrupts: Should contain all of the per-channel DMA interrupts in - ascending order with respect to the DMA channel index. -- clocks: Must contain one entry for the ADMA module clock - (TEGRA210_CLK_D_AUDIO). -- clock-names: Must contain the name "d_audio" for the corresponding - 'clocks' entry. -- #dma-cells : Must be 1. The first cell denotes the receive/transmit - request number and should be between 1 and the maximum number of - requests supported. This value corresponds to the RX/TX_REQUEST_SELECT - fields in the ADMA_CHn_CTRL register. - - -Example: - -adma: dma@702e2000 { - compatible = "nvidia,tegra210-adma"; - reg = <0x0 0x702e2000 0x0 0x2000>; - interrupt-parent = <&tegra_agic>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; - clock-names = "d_audio"; - #dma-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml new file mode 100644 index 000000000000..5c2e2f156e31 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Audio DMA (ADMA) controller + +description: | + The Tegra Audio DMA controller is used for transferring data + between system memory and the Audio Processing Engine (APE). + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra210-adma + - nvidia,tegra186-adma + - items: + - const: nvidia,tegra194-adma + - const: nvidia,tegra186-adma + + reg: + maxItems: 1 + + interrupts: + description: | + Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. + minItems: 1 + maxItems: 32 + + clocks: + description: Must contain one entry for the ADMA module clock + maxItems: 1 + + clock-names: + const: d_audio + + "#dma-cells": + description: | + The first cell denotes the receive/transmit request number and + should be between 1 and the maximum number of requests supported. + This value corresponds to the RX/TX_REQUEST_SELECT fields in the + ADMA_CHn_CTRL register. + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include<dt-bindings/clock/tegra210-car.h> + + dma-controller@702e2000 { + compatible = "nvidia,tegra210-adma"; + reg = <0x702e2000 0x2000>; + interrupt-parent = <&tegra_agic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "d_audio"; + #dma-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 06889963dfb7..ba282f4c9fd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -35,7 +35,6 @@ properties: - arm,gic-400 - arm,pl390 - arm,tc11mp-gic - - nvidia,tegra210-agic - qcom,msm-8660-qgic - qcom,msm-qgic2 @@ -53,6 +52,14 @@ properties: - const: brcm,brahma-b15-gic - const: arm,cortex-a15-gic + - oneOf: + - const: nvidia,tegra210-agic + - items: + - enum: + - nvidia,tegra186-agic + - nvidia,tegra194-agic + - const: nvidia,tegra210-agic + interrupt-controller: true "#address-cells": diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt deleted file mode 100644 index f1487a751b1a..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ /dev/null @@ -1,149 +0,0 @@ -Broadcom BCM53xx Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of: "brcm,bcm5325" - "brcm,bcm53115" - "brcm,bcm53125" - "brcm,bcm53128" - "brcm,bcm5365" - "brcm,bcm5395" - "brcm,bcm5389" - "brcm,bcm5397" - "brcm,bcm5398" - - For the BCM11360 SoC, must be: - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string - - For the BCM5310x SoCs with an integrated switch, must be one of: - "brcm,bcm53010-srab" - "brcm,bcm53011-srab" - "brcm,bcm53012-srab" - "brcm,bcm53018-srab" - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string - - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of: - "brcm,bcm11404-srab" - "brcm,bcm11407-srab" - "brcm,bcm11409-srab" - "brcm,bcm58310-srab" - "brcm,bcm58311-srab" - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string - - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of: - "brcm,bcm58522-srab" - "brcm,bcm58523-srab" - "brcm,bcm58525-srab" - "brcm,bcm58622-srab" - "brcm,bcm58623-srab" - "brcm,bcm58625-srab" - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string - - For the BCM63xx/33xx SoCs with an integrated switch, must be one of: - "brcm,bcm3384-switch" - "brcm,bcm6328-switch" - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" - -Required properties for BCM585xx/586xx/88312 SoCs: - - - reg: a total of 3 register base addresses, the first one must be the - Switch Register Access block base, the second is the port 5/4 mux - configuration register and the third one is the SGMII configuration - and status register base address. - - - interrupts: a total of 13 interrupts must be specified, in the following - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, - then the timestamping interrupt and the sleep timer interrupts for ports - 5,7,8. - -Optional properties for BCM585xx/586xx/88312 SoCs: - - - reg-names: a total of 3 names matching the 3 base register address, must - be in the following order: - "srab" - "mux_config" - "sgmii_config" - - - interrupt-names: a total of 13 names matching the 13 interrupts specified - must be in the following order: - "link_state_p0" - "link_state_p1" - "link_state_p2" - "link_state_p3" - "link_state_p4" - "link_state_p5" - "link_state_p7" - "link_state_p8" - "phy" - "ts" - "imp_sleep_timer_p5" - "imp_sleep_timer_p7" - "imp_sleep_timer_p8" - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via MDIO to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - compatible = "brcm,unimac"; - reg = <0x10001000 0x1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio0: mdio@10000000 { - compatible = "brcm,unimac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - switch0: ethernet-switch@1e { - compatible = "brcm,bcm53125"; - reg = <30>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - reg = <0>; - label = "lan1"; - }; - - port1@1 { - reg = <1>; - label = "lan2"; - }; - - port5@5 { - reg = <5>; - label = "cable-modem"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - }; - - port8@8 { - reg = <8>; - label = "cpu"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - ethernet = <ð0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml new file mode 100644 index 000000000000..c3c938893ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53xx Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + Broadcom BCM53xx Ethernet switches + +properties: + compatible: + oneOf: + - const: brcm,bcm5325 + - const: brcm,bcm53115 + - const: brcm,bcm53125 + - const: brcm,bcm53128 + - const: brcm,bcm5365 + - const: brcm,bcm5395 + - const: brcm,bcm5389 + - const: brcm,bcm5397 + - const: brcm,bcm5398 + - items: + - const: brcm,bcm11360-srab + - const: brcm,cygnus-srab + - items: + - enum: + - brcm,bcm53010-srab + - brcm,bcm53011-srab + - brcm,bcm53012-srab + - brcm,bcm53018-srab + - brcm,bcm53019-srab + - const: brcm,bcm5301x-srab + - items: + - enum: + - brcm,bcm11404-srab + - brcm,bcm11407-srab + - brcm,bcm11409-srab + - brcm,bcm58310-srab + - brcm,bcm58311-srab + - brcm,bcm58313-srab + - const: brcm,omega-srab + - items: + - enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + - const: brcm,nsp-srab + - items: + - enum: + - brcm,bcm3384-switch + - brcm,bcm6328-switch + - brcm,bcm6368-switch + - const: brcm,bcm63xx-switch + +required: + - compatible + - reg + +# BCM585xx/586xx/88312 SoCs +if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab +then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts +else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "cable-modem"; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + label = "cpu"; + phy-mode = "rgmii-txid"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + axi { + #address-cells = <1>; + #size-cells = <1>; + + switch@36000 { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index a765ceba28c6..8e044631bcf7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -20,7 +20,7 @@ select: false properties: $nodename: - pattern: "^switch(@.*)?$" + pattern: "^(ethernet-)?switch(@.*)?$" dsa,member: minItems: 2 @@ -78,6 +78,10 @@ patternProperties: mac-address: true + sfp: true + + managed: true + required: - reg diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index fdf709817218..cc93063a8f39 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -95,6 +95,7 @@ properties: # 10GBASE-KR, XFI, SFI - 10gbase-kr - usxgmii + - 10gbase-r phy-mode: $ref: "#/properties/phy-connection-type" diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml new file mode 100644 index 000000000000..2159b7d1f537 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPAA2 MAC bindings + +maintainers: + - Ioana Ciornei <ioana.ciornei@nxp.com> + +description: + This binding represents the DPAA2 MAC objects found on the fsl-mc bus and + located under the 'dpmacs' node for the fsl-mc bus DTS node. + +allOf: + - $ref: "ethernet-controller.yaml#" + +properties: + compatible: + const: fsl,qoriq-mc-dpmac + + reg: + maxItems: 1 + description: The DPMAC number + + phy-handle: true + + phy-connection-type: true + + phy-mode: true + + pcs-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + A reference to a node representing a PCS PHY device found on + the internal MDIO bus. + + managed: true + +required: + - reg + +additionalProperties: false + +examples: + - | + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt index 8763f448c376..90d38f710635 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt @@ -99,7 +99,7 @@ Example: nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,lpdr = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml new file mode 100644 index 000000000000..fd12bafe3548 --- /dev/null +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Power Domains Controller + +maintainers: + - Weiyi Lu <weiyi.lu@mediatek.com> + - Matthias Brugger <mbrugger@suse.com> + +description: | + Mediatek processors include support for multiple power domains which can be + powered up/down by software based on different application scenes to save power. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle for SCPSYS node representing the domain. + +properties: + $nodename: + const: power-controller + + compatible: + enum: + - mediatek,mt8173-power-controller + - mediatek,mt8183-power-controller + - mediatek,mt8192-power-controller + + '#power-domain-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents the power domains within the power controller node as documented + in Documentation/devicetree/bindings/power/power-domain.yaml. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + description: | + Power domain index. Valid values are defined in: + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain. + "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain. + "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain. + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents a power domain child within a power domain parent node. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents a power domain child within a power domain parent node. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + required: + - reg + + additionalProperties: false + + required: + - reg + + additionalProperties: false + + required: + - reg + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + spm: power-controller { + compatible = "mediatek,mt8173-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8173_POWER_DOMAIN_VDEC { + reg = <MT8173_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC { + reg = <MT8173_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_ISP { + reg = <MT8173_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MM { + reg = <MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC_LT { + reg = <MT8173_POWER_DOMAIN_VENC_LT>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mm", "venclt"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_AUDIO { + reg = <MT8173_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_USB { + reg = <MT8173_POWER_DOMAIN_USB>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG_2D { + reg = <MT8173_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG { + reg = <MT8173_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml new file mode 100644 index 000000000000..9a51efa9d101 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STUSB160x Type-C controller bindings + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + enum: + - st,stusb1600 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: main power supply (4.1V-22V) + + vsys-supply: + description: low power supply (3.0V-5.5V) + + vconn-supply: + description: power supply (2.7V-5.5V) used to supply VConn on CC pin in + source or dual power role + + connector: + type: object + + allOf: + - $ref: ../connector/usb-connector.yaml + + properties: + compatible: + const: usb-c-connector + + power-role: true + + typec-power-opmode: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + vdd-supply = <&vbus_drd>; + vsys-supply = <&vdd_usb>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + typec-power-opmode = "default"; + + port { + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 57f5f312e949..49e888a1467e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -25,6 +25,8 @@ patternProperties: # Keep list in alphabetical order. "^70mai,.*": description: 70mai Co., Ltd. + "^abb,.*": + description: ABB "^abilis,.*": description: Abilis Systems "^abracon,.*": @@ -67,6 +69,8 @@ patternProperties: description: AlphaScale Integrated Circuits Systems, Inc. "^alps,.*": description: Alps Electric Co., Ltd. + "^alt,.*": + description: Altus-Escon-Company BV "^altr,.*": description: Altera Corp. "^amarula,.*": @@ -319,10 +323,14 @@ patternProperties: description: Einfochips "^elan,.*": description: Elan Microelectronic Corp. + "^element14,.*": + description: Element14 (A Premier Farnell Company) "^elgin,.*": description: Elgin S/A. "^elida,.*": description: Shenzhen Elida Technology Co., Ltd. + "^elimo,.*": + description: Elimo Engineering Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. "^emlid,.*": @@ -459,6 +467,8 @@ patternProperties: description: Holt Integrated Circuits, Inc. "^honeywell,.*": description: Honeywell + "^honestar,.*": + description: Honestar Technologies Co., Ltd. "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -561,6 +571,8 @@ patternProperties: description: Kionix, Inc. "^kobo,.*": description: Rakuten Kobo Inc. + "^kobol,.*": + description: Kobol Innovations Pte. Ltd. "^koe,.*": description: Kaohsiung Opto-Electronics Inc. "^kontron,.*": @@ -679,6 +691,8 @@ patternProperties: description: Micron Technology Inc. "^microsoft,.*": description: Microsoft Corporation + "^microsys,.*": + description: MicroSys Electronics GmbH "^mikroe,.*": description: MikroElektronika d.o.o. "^mikrotik,.*": @@ -772,6 +786,8 @@ patternProperties: description: NXP Semiconductors "^oceanic,.*": description: Oceanic Systems (UK) Ltd. + "^oct,.*": + description: Octavo Systems LLC "^okaya,.*": description: Okaya Electric America, Inc. "^oki,.*": @@ -804,6 +820,8 @@ patternProperties: description: Ortus Technology Co., Ltd. "^osddisplays,.*": description: OSD Displays + "^ouya,.*": + description: Ouya Inc. "^overkiz,.*": description: Overkiz SAS "^ovti,.*": @@ -906,6 +924,8 @@ patternProperties: description: iMX6 Rex Project "^rervision,.*": description: Shenzhen Rervision Technology Co., Ltd. + "^revotics,.*": + description: Revolution Robotics, Inc. (Revotics) "^richtek,.*": description: Richtek Technology Corporation "^ricoh,.*": @@ -1154,12 +1174,16 @@ patternProperties: description: Vamrs Ltd. "^variscite,.*": description: Variscite Ltd. + "^vdl,.*": + description: Van der Laan b.v. "^via,.*": description: VIA Technologies, Inc. "^videostrong,.*": description: Videostrong Technology Co., Ltd. "^virtio,.*": description: Virtual I/O Device Specification, developed by the OASIS consortium + "^virtual,.*": + description: Used for virtual device without specific vendor. "^vishay,.*": description: Vishay Intertechnology, Inc "^vitesse,.*": diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index 991b4e33486e..fb7695515be1 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -18,10 +18,26 @@ properties: - const: fsl,imx21-wdt - items: - enum: + - fsl,imx25-wdt + - fsl,imx27-wdt + - fsl,imx31-wdt + - fsl,imx35-wdt + - fsl,imx50-wdt + - fsl,imx51-wdt + - fsl,imx53-wdt + - fsl,imx6q-wdt + - fsl,imx6sl-wdt + - fsl,imx6sll-wdt + - fsl,imx6sx-wdt + - fsl,imx6ul-wdt + - fsl,imx7d-wdt - fsl,imx8mm-wdt - fsl,imx8mn-wdt - fsl,imx8mp-wdt - fsl,imx8mq-wdt + - fsl,ls1012a-wdt + - fsl,ls1043a-wdt + - fsl,vf610-wdt - const: fsl,imx21-wdt reg: diff --git a/MAINTAINERS b/MAINTAINERS index 00e85fa45afc..4ae724ec404a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2148,6 +2148,7 @@ W: http://linux-chenxing.org/ F: Documentation/devicetree/bindings/arm/mstar/* F: arch/arm/boot/dts/mstar-* F: arch/arm/mach-mstar/ +F: include/dt-bindings/gpio/msc313-gpio.h ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT M: Michael Petchkovsky <mkpetch@internode.on.net> @@ -3394,7 +3395,7 @@ M: Florian Fainelli <f.fainelli@gmail.com> L: netdev@vger.kernel.org L: openwrt-devel@lists.openwrt.org (subscribers-only) S: Supported -F: Documentation/devicetree/bindings/net/dsa/b53.txt +F: Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml F: drivers/net/dsa/b53/* F: include/linux/platform_data/b53.h diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ce66ffd5a1bb..3d1ea0b25168 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -197,6 +197,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ exynos4412-origen.dtb \ + exynos4412-p4note-n8010.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ exynos4412-trats2.dtb @@ -339,7 +340,10 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \ lpc3250-ea3250.dtb \ lpc3250-phy3250.dtb dtb-$(CONFIG_ARCH_NPCM7XX) += \ - nuvoton-npcm750-evb.dtb + nuvoton-npcm730-gsj.dtb \ + nuvoton-npcm730-kudo.dtb \ + nuvoton-npcm750-evb.dtb \ + nuvoton-npcm750-runbmc-olympus.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ @@ -414,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-usbarmory.dtb \ imx53-voipac-bsb.dtb dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-alti6p.dtb \ imx6dl-apf6dev.dtb \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ @@ -450,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ @@ -581,6 +587,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ imx6qp-phytec-mira-rdk-nand.dtb \ + imx6qp-prtwd3.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ @@ -622,6 +629,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ + imx6ul-phytec-segin-ff-rdk-emmc.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ @@ -641,6 +649,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-aster.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-flex-concentrator.dtb \ + imx7d-flex-concentrator-mfg.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ @@ -1066,6 +1076,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157a-iot-box.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ + stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ @@ -1192,6 +1203,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb \ + sun8i-h3-nanopi-r1.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ @@ -1201,12 +1213,14 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-h3-rervision-dvk.dtb \ + sun8i-h3-zeropi.dtb \ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ @@ -1241,7 +1255,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra30-colibri-eval-v3.dtb + tegra30-colibri-eval-v3.dtb \ + tegra30-ouya.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ @@ -1302,6 +1317,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ zynq-zturn.dtb \ + zynq-zturn-v5.dtb \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -1319,6 +1335,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-382-rd-ac3x-48g4x2xl.dtb \ armada-385-clearfog-gtr-s4.dtb \ armada-385-clearfog-gtr-l8.dtb \ armada-385-db-88f6820-amc.dtb \ @@ -1340,6 +1357,12 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \ armada-398-db.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ + armada-xp-crs305-1g-4s.dtb \ + armada-xp-crs305-1g-4s-bit.dtb \ + armada-xp-crs326-24g-2s.dtb \ + armada-xp-crs326-24g-2s-bit.dtb \ + armada-xp-crs328-4c-20s-4s.dtb \ + armada-xp-crs328-4c-20s-4s-bit.dtb \ armada-xp-db.dtb \ armada-xp-db-dxbc2.dtb \ armada-xp-db-xc3-24g4xg.dtb \ @@ -1372,6 +1395,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-infinity-msc313-breadbee_crust.dtb \ + mstar-infinity2m-ssd202d-ssd201htv2.dtb \ mstar-infinity3-msc313e-breadbee.dtb \ mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb @@ -1381,7 +1405,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-facebook-cmm.dtb \ + aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ @@ -1390,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ + aspeed-bmc-ibm-rainier-4u.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index b7f64c7ba83d..3ea286180382 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -168,7 +168,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index c696d57cf364..69acaf4ea0f3 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -241,6 +241,30 @@ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; + + /* E1 */ + eqep0_pins: pinmux_eqep0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */ + >; + }; + + /* E2 */ + eqep1_pins: pinmux_eqep1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */ + >; + }; + + /* E3 */ + eqep2_pins: pinmux_eqep2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */ + >; + }; }; &uart0 { @@ -419,3 +443,33 @@ line-name = "LS_BUF_EN"; }; }; + +&epwmss0 { + status = "okay"; +}; + +&eqep0 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep0_pins>; + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&eqep1 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep1_pins>; + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&eqep2 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep2_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index c6fe9db660e2..36d963db4026 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -122,7 +122,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - /* gpmc_wpn.gpio0_30 */ + /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 12dffccd1ffd..7c6f2c11f0e1 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -229,7 +229,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index c9f354fc984a..7ec23d47a429 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -70,7 +70,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index ea20e4bdf040..cb164dfec56d 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1923,6 +1923,15 @@ status = "disabled"; }; + eqep0: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -1975,6 +1984,15 @@ status = "disabled"; }; + eqep1: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -2027,6 +2045,15 @@ status = "disabled"; }; + eqep2: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 243e35f7a56c..8ec3295d5223 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -2388,7 +2388,7 @@ ranges = <0 0 0x20000>; usb1: usb@10000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, @@ -2468,7 +2468,7 @@ ranges = <0 0 0x20000>; usb2: usb@10000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 9805e507c695..7f2f24a29e6c 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -426,7 +426,7 @@ status = "disabled"; }; - usb2: usb3@58000 { + usb2: usb@58000 { compatible = "marvell,armada-375-xhci"; reg = <0x58000 0x20000>,<0x5b880 0x80>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts new file mode 100644 index 000000000000..584f0d0398a5 --- /dev/null +++ b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 382 reference board + * (RD-AC3X-48G4X2XL) + * + * Copyright (C) 2020 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 382 RD-AC3X"; + compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x", + "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@53{ + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + /* CPLD device present at 0x3c. Function unknown */ +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +ð1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x00500000>; + label = "u-boot"; + }; + partition@500000{ + reg = <0x00500000 0x00400000>; + label = "u-boot env"; + }; + partition@900000{ + reg = <0x00900000 0x3F700000>; + label = "user"; + }; + }; + }; +}; + +&refclk { + clock-frequency = <200000000>; +}; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 768b6c5d2129..646a06420c77 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "armada-385.dtsi" / { @@ -82,6 +83,32 @@ }; }; }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c>; + tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <3000>; + + /* + * For now this has to be enabled at boot time by U-Boot when + * a SFP module is present. Read more in the comment in the + * eth2 node below. + */ + status = "disabled"; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; }; /* Connected to 88E6176 switch, port 6 */ @@ -90,6 +117,9 @@ pinctrl-0 = <&ge0_rgmii_pins>; status = "okay"; phy-mode = "rgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; fixed-link { speed = <1000>; @@ -103,6 +133,9 @@ pinctrl-0 = <&ge1_rgmii_pins>; status = "okay"; phy-mode = "rgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; fixed-link { speed = <1000>; @@ -112,9 +145,23 @@ /* WAN port */ ð2 { + /* + * eth2 is connected via a multiplexor to both the SFP cage and to + * ethernet-phy@1. The multiplexor switches the signal to SFP cage when + * a SFP module is present, as determined by the mode-def0 GPIO. + * + * Until kernel supports this configuration properly, in case SFP module + * is present, U-Boot has to enable the sfp node above, remove phy + * handle and add managed = "in-band-status" property. + */ status = "okay"; phy-mode = "sgmii"; - phy = <&phy1>; + phy-handle = <&phy1>; + phys = <&comphy5 2>; + sfp = <&sfp>; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; &i2c0 { @@ -127,7 +174,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; - status = "okay"; i2c@0 { #address-cells = <1>; @@ -135,7 +181,115 @@ reg = <0>; /* STM32F0 command interface at address 0x2a */ - /* leds device (in STM32F0) at address 0x2b */ + + led-controller@2b { + compatible = "cznic,turris-omnia-leds"; + reg = <0x2b>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * LEDs are controlled by MCU (STM32F0) at + * address 0x2b. + * + * The driver does not support HW control mode + * for the LEDs yet. Disable the LEDs for now. + * + * Also LED functions are not stable yet: + * - there are 3 LEDs connected via MCU to PCIe + * ports. One of these ports supports mSATA. + * There is no mSATA nor PCIe function. + * For now we use LED_FUNCTION_WLAN, since + * in most cases users have wifi cards in + * these slots + * - there are 2 LEDs dedicated for user: A and + * B. Again there is no such function defined. + * For now we use LED_FUNCTION_INDICATOR + */ + status = "disabled"; + + multi-led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + multi-led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + multi-led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <3>; + }; + + multi-led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <2>; + }; + + multi-led@4 { + reg = <0x4>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <1>; + }; + + multi-led@5 { + reg = <0x5>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WAN; + }; + + multi-led@6 { + reg = <0x6>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + }; + + multi-led@7 { + reg = <0x7>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + }; + + multi-led@8 { + reg = <0x8>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + }; + + multi-led@9 { + reg = <0x9>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + }; + + multi-led@a { + reg = <0xa>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + }; + + multi-led@b { + reg = <0xb>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_POWER; + }; + }; eeprom@54 { compatible = "atmel,24c64"; @@ -177,7 +331,7 @@ /* routed to PCIe2 connector (CN62A) */ }; - i2c@4 { + sfp_i2c: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -232,9 +386,8 @@ pinctrl-0 = <&mdio_pins>; status = "okay"; - phy1: phy@1 { - status = "okay"; - compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; /* irq is connected to &pcawan pin 7 */ @@ -242,13 +395,18 @@ /* Switch MV88E6176 at address 0x10 */ switch@10 { + pinctrl-names = "default"; + pinctrl-0 = <&swint_pins>; compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; - dsa,member = <0 0>; + dsa,member = <0 0>; reg = <0x10>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -301,6 +459,11 @@ marvell,function = "gpio"; }; + swint_pins: swint-pins { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + spi0cs0_pins: spi0cs0-pins { marvell,pins = "mpp25"; marvell,function = "spi0"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 20f8d4667753..4140a5303b48 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -73,13 +73,13 @@ * 14-SFP_TX_DISABLE * 15-SFP_MOD_DEF0 */ - pcie2_0_clkreq { + pcie2-0-clkreq-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_LOW>; input; line-name = "pcie2.0-clkreq"; }; - pcie2_0_w_disable { + pcie2-0-w-disable-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index a0aa1d188f0c..f8a06ae4a3c9 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -141,31 +141,31 @@ #gpio-cells = <2>; reg = <0x20>; - pcie1_0_clkreq { + pcie1-0-clkreq-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "pcie1.0-clkreq"; }; - pcie1_0_w_disable { + pcie1-0-w-disable-hog { gpio-hog; gpios = <3 GPIO_ACTIVE_LOW>; output-low; line-name = "pcie1.0-w-disable"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; input; line-name = "usb3-current-limit"; }; - usb3_power { + usb3-power-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb3-power"; }; - m2_devslp { + m2-devslp-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index fb49df2a3bce..b3728de3bd3f 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -166,19 +166,19 @@ interrupt-controller; #interrupt-cells = <2>; - board_rev_bit_0 { + board-rev-bit-0-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-0"; }; - board_rev_bit_1 { + board-rev-bit-1-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-1"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 654648b05c7c..38a052a0312d 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -264,11 +264,8 @@ &i2c0 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; -}; - -&i2c1 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; }; &mpic { @@ -324,6 +321,11 @@ "mpp2", "mpp3"; marvell,function = "spi0"; }; + + i2c0_pins: i2c-pins-0 { + marvell,pins = "mpp14", "mpp15"; + marvell,function = "i2c0"; + }; }; &spi0 { diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts new file mode 100644 index 000000000000..a022c68dc943 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS305-1G-4S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs305-1g-4s.dtsi" + +/ { + model = "MikroTik CRS305-1G-4S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts new file mode 100644 index 000000000000..010b83b54212 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS305-1G-4S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs305-1g-4s.dtsi" + +/ { + model = "MikroTik CRS305-1G-4S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi new file mode 100644 index 000000000000..32fb21b2bf6a --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS305-1G-4S board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS305-1G-4S+"; + compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts new file mode 100644 index 000000000000..21f442afab1f --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS326-24G-2S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs326-24g-2s.dtsi" + +/ { + model = "MikroTik CRS326-24G-2S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts new file mode 100644 index 000000000000..83aef43f66d5 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS326-24G-2S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs326-24g-2s.dtsi" + +/ { + model = "MikroTik CRS326-24G-2S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi new file mode 100644 index 000000000000..f3e1a25ca5f2 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS326-24G-2S board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS326-24G-2S+"; + compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts new file mode 100644 index 000000000000..e05aee6cdc04 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs328-4c-20s-4s.dtsi" + +/ { + model = "MikroTik CRS328-4C-20S-4S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts new file mode 100644 index 000000000000..665757f6e18e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS328-4C-20S-4S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs328-4c-20s-4s.dtsi" + +/ { + model = "MikroTik CRS328-4C-20S-4S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi new file mode 100644 index 000000000000..c8b1355ce15e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS328-4C-20S-4S+ board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS328-4C-20S-4S+"; + compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 8d0f4656aa05..89be13197780 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -23,6 +23,15 @@ }; }; +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mdio1 { status = "okay"; @@ -50,6 +59,17 @@ }; }; +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + + &mac1 { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 60ba86f3e5bc..96ff0aea64e5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -13,6 +13,21 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + aliases { serial0 = &uart1; serial4 = &uart5; @@ -82,6 +97,50 @@ &pinctrl_adc4_default>; }; +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","", + /*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S", + "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD", + /*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN", + "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET", + /*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP", + "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","", + /*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0", + "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","", + /*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3", + "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN", + "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT", + "ASSERT_CLR_CMOS","ASSERT_BMC_READY", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT", + "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT", + "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT", + "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","SENSOR THERM","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + //APML for P0 &i2c0 { status = "okay"; @@ -139,17 +198,22 @@ &kcs1 { status = "okay"; - kcs_addr = <0x60>; + aspeed,lpc-io-reg = <0x60>; }; &kcs2 { status = "okay"; - kcs_addr = <0x62>; + aspeed,lpc-io-reg = <0x62>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xCA2>; }; &kcs4 { status = "okay"; - kcs_addr = <0x97DE>; + aspeed,lpc-io-reg = <0x97DE>; }; &lpc_snoop { @@ -215,5 +279,12 @@ }; }; +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts new file mode 100644 index 000000000000..2feb25b0e43b --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -0,0 +1,924 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2020 Bytedance. +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Bytedance G220A BMC"; + compatible = "bytedance,g220a-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + i2c14 = &channel_3_0; + i2c15 = &channel_3_1; + i2c16 = &channel_3_2; + i2c17 = &channel_3_3; + i2c18 = &channel_6_0; + i2c19 = &channel_6_1; + i2c20 = &channel_6_2; + i2c21 = &channel_6_3; + i2c22 = &channel_6_4; + i2c23 = &channel_6_5; + i2c24 = &channel_6_6; + i2c25 = &channel_6_7; + i2c26 = &channel_6_8; + i2c27 = &channel_6_9; + i2c28 = &channel_6_10; + i2c29 = &channel_6_11; + i2c30 = &channel_6_12; + i2c31 = &channel_6_13; + i2c32 = &channel_6_14; + i2c33 = &channel_6_15; + i2c34 = &channel_6_16; + i2c35 = &channel_6_17; + i2c36 = &channel_6_18; + i2c37 = &channel_6_19; + i2c38 = &channel_6_20; + i2c39 = &channel_6_21; + i2c40 = &channel_6_22; + i2c41 = &channel_6_23; + i2c42 = &channel_6_24; + i2c43 = &channel_6_25; + i2c44 = &channel_10_0; + i2c45 = &channel_10_1; + i2c46 = &channel_10_2; + i2c47 = &channel_10_3; + i2c48 = &channel_10_4; + i2c49 = &channel_10_5; + i2c50 = &channel_10_6; + i2c51 = &channel_10_7; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bc000000 { + no-map; + reg = <0xbc000000 0x04000000>; /* 64M */ + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + led-pattern = <1000 1000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + burn-in-signal { + label = "burn-in"; + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + rear-riser1-presence { + label = "rear-riser1-presence"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + alrt-pvddq-cpu0 { + label = "alrt-pvddq-cpu0"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + rear-riser0-presence { + label = "rear-riser0-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fault-pvddq-cpu0 { + label = "fault-pvddq-cpu0"; + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + alrt-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fault-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fault-pvccin-cpu1 { + label = "fault-pvccin-cpuq"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + bmc-rom0-wp { + label = "bmc-rom0-wp"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + bmc-rom1-wp { + label = "bmc-rom1-wp"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <15>; + }; + + front-bp1-presence { + label = "front-bp1-presence"; + gpios = <&pca1 8 GPIO_ACTIVE_LOW>; + linux,code = <16>; + }; + + rear-bp-presence { + label = "rear-bp-presence"; + gpios = <&pca1 9 GPIO_ACTIVE_LOW>; + linux,code = <17>; + }; + + fault-pvccin-cpu0 { + label = "fault-pvccin-cpu0"; + gpios = <&pca1 10 GPIO_ACTIVE_LOW>; + linux,code = <18>; + }; + + alrt-p1v05-pvcc { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 11 GPIO_ACTIVE_LOW>; + linux,code = <19>; + }; + + fault-p1v05-pvccio { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 12 GPIO_ACTIVE_LOW>; + linux,code = <20>; + }; + + alrt-p1v8-pvccio { + label = "alrt-p1v8-pvccio"; + gpios = <&pca1 13 GPIO_ACTIVE_LOW>; + linux,code = <21>; + }; + + fault-p1v8-pvccio { + label = "fault-p1v8-pvccio"; + gpios = <&pca1 14 GPIO_ACTIVE_LOW>; + linux,code = <22>; + }; + + front-bp0-presence { + label = "front-bp0-presence"; + gpios = <&pca1 15 GPIO_ACTIVE_LOW>; + linux,code = <23>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <100000000>; + }; +}; + +&adc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0", + "","","","", + /*B0-B7*/ "BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N", + "","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3", + "FM_PROJECT_ID4","FM_PROJECT_ID5","","", + /*F0-F7*/ "PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N", + "BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY", + "PCH_GLB_RST_N", + /*G0-G7*/ "P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N", + "P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT", + "NMI_BUTTON", + /*H0-H7*/ "BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK", + "BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0", + "PCA9546_U70_RST_N","IRQ_SML0_ALERT_N", + /*I0-I7*/ "FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N", + "","","","","", + /*J0-J7*/ "FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N", + "","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N", + "","IRQ_SML1_PMBUS_ALERT_N","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION", + /*R0-R7*/ "","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N", + "ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","", + /*S0-S7*/ "BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N", + "FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N", + "","","","", + /*Z0-Z7*/ "XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL", + "PCH_BMC_SMI_ACTIVE_R_N","","","","", + /*AA0-AA7*/ "PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R", + "FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT", + /*AB0-AB7*/ "","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","", + /*AC0-AC7*/ "","","","","","","","CPLD_PLTRST_B_N"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xCA2>; + status = "okay"; +}; + +&kcs4 { + aspeed,lpc-io-reg = <0xCA4>; + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_3_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_3_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_3_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c4 { + status = "okay"; + +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + i2c-switch@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + channel_6_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + channel_6_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + channel_6_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + channel_6_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_12: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_13: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_14: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_15: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + pca0:pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca1:pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; +}; + +&gpio { + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + output-low; + line-name = "NCSI_BMC_R_SEL"; + }; + + pin_gpio_b6 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + output-low; + line-name = "EN_NCSI_SWITCH_N"; + }; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts new file mode 100644 index 000000000000..dcf213472749 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. +/dts-v1/; + +#include "ast2400-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Galaxy 100 BMC"; + compatible = "facebook,galaxy100-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>; + }; +}; + +&wdt2 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&fmc { + flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + + +&i2c9 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index c34741dbd268..9eb23e874f19 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -70,6 +70,162 @@ i2c45 = &imux45; i2c46 = &imux46; i2c47 = &imux47; + + /* + * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for + * connecting to left PDB (Power Distribution Board). + */ + i2c48 = &imux48; + i2c49 = &imux49; + i2c50 = &imux50; + i2c51 = &imux51; + i2c52 = &imux52; + i2c53 = &imux53; + i2c54 = &imux54; + i2c55 = &imux55; + + /* + * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for + * connecting to right PDB (Power Distribution Board). + */ + i2c56 = &imux56; + i2c57 = &imux57; + i2c58 = &imux58; + i2c59 = &imux59; + i2c60 = &imux60; + i2c61 = &imux61; + i2c62 = &imux62; + i2c63 = &imux63; + + /* + * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for + * connecting to top FCM (Fan Control Module). + */ + i2c64 = &imux64; + i2c65 = &imux65; + i2c66 = &imux66; + i2c67 = &imux67; + i2c68 = &imux68; + i2c69 = &imux69; + i2c70 = &imux70; + i2c71 = &imux71; + + /* + * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for + * connecting to bottom FCM (Fan Control Module). + */ + i2c72 = &imux72; + i2c73 = &imux73; + i2c74 = &imux74; + i2c75 = &imux75; + i2c76 = &imux76; + i2c77 = &imux77; + i2c78 = &imux78; + i2c79 = &imux79; + + /* + * I2C Switch 40-0073 (channel #0 of 11-0070): connecting + * to PIM (Port Interface Module) #1 (1-based). + */ + i2c80 = &imux80; + i2c81 = &imux81; + i2c82 = &imux82; + i2c83 = &imux83; + i2c84 = &imux84; + i2c85 = &imux85; + i2c86 = &imux86; + i2c87 = &imux87; + + /* + * I2C Switch 41-0073 (channel #1 of 11-0070): connecting + * to PIM (Port Interface Module) #2 (1-based). + */ + i2c88 = &imux88; + i2c89 = &imux89; + i2c90 = &imux90; + i2c91 = &imux91; + i2c92 = &imux92; + i2c93 = &imux93; + i2c94 = &imux94; + i2c95 = &imux95; + + /* + * I2C Switch 42-0073 (channel #2 of 11-0070): connecting + * to PIM (Port Interface Module) #3 (1-based). + */ + i2c96 = &imux96; + i2c97 = &imux97; + i2c98 = &imux98; + i2c99 = &imux99; + i2c100 = &imux100; + i2c101 = &imux101; + i2c102 = &imux102; + i2c103 = &imux103; + + /* + * I2C Switch 43-0073 (channel #3 of 11-0070): connecting + * to PIM (Port Interface Module) #4 (1-based). + */ + i2c104 = &imux104; + i2c105 = &imux105; + i2c106 = &imux106; + i2c107 = &imux107; + i2c108 = &imux108; + i2c109 = &imux109; + i2c110 = &imux110; + i2c111 = &imux111; + + /* + * I2C Switch 44-0073 (channel #4 of 11-0070): connecting + * to PIM (Port Interface Module) #5 (1-based). + */ + i2c112 = &imux112; + i2c113 = &imux113; + i2c114 = &imux114; + i2c115 = &imux115; + i2c116 = &imux116; + i2c117 = &imux117; + i2c118 = &imux118; + i2c119 = &imux119; + + /* + * I2C Switch 45-0073 (channel #5 of 11-0070): connecting + * to PIM (Port Interface Module) #6 (1-based). + */ + i2c120 = &imux120; + i2c121 = &imux121; + i2c122 = &imux122; + i2c123 = &imux123; + i2c124 = &imux124; + i2c125 = &imux125; + i2c126 = &imux126; + i2c127 = &imux127; + + /* + * I2C Switch 46-0073 (channel #6 of 11-0070): connecting + * to PIM (Port Interface Module) #7 (1-based). + */ + i2c128 = &imux128; + i2c129 = &imux129; + i2c130 = &imux130; + i2c131 = &imux131; + i2c132 = &imux132; + i2c133 = &imux133; + i2c134 = &imux134; + i2c135 = &imux135; + + /* + * I2C Switch 47-0073 (channel #7 of 11-0070): connecting + * to PIM (Port Interface Module) #8 (1-based). + */ + i2c136 = &imux136; + i2c137 = &imux137; + i2c138 = &imux138; + i2c139 = &imux139; + i2c140 = &imux140; + i2c141 = &imux141; + i2c142 = &imux142; + i2c143 = &imux143; }; chosen { @@ -184,11 +340,16 @@ &i2c2 { status = "okay"; + /* + * I2C Switch 2-0070 is connecting to SCM (System Controller + * Module). + */ i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; imux16: i2c@0 { #address-cells = <1>; @@ -269,29 +430,270 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; + /* + * I2C Switch 8-0070 channel #0: connecting to left PDB + * (Power Distribution Board). + */ imux24: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + imux48: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux49: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux50: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux51: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux52: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux53: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux54: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux55: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #1: connecting to right PDB + * (Power Distribution Board). + */ imux25: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + imux56: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux57: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux58: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux59: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux60: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux61: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux62: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux63: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #2: connecting to top FCM + * (Fan Control Module). + */ imux26: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux64: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux65: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux66: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux67: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux68: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux69: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux70: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux71: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #3: connecting to bottom + * FCM (Fan Control Module). + */ imux27: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux72: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux73: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux74: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux75: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux76: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux77: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux78: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux79: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; imux28: i2c@4 { @@ -323,11 +725,16 @@ &i2c9 { status = "okay"; + /* + * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB + * (Switch Main Board). + */ i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; imux32: i2c@0 { #address-cells = <1>; @@ -391,53 +798,534 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; + /* + * I2C Switch 11-0070 channel #0: connecting to PIM + * (Port Interface Module) #1 (1-based). + */ imux40: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux80: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux81: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux82: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux83: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux84: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux85: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux86: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux87: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #1: connecting to PIM + * (Port Interface Module) #2 (1-based). + */ imux41: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux88: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux89: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux90: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux91: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux92: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux93: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux94: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux95: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #2: connecting to PIM + * (Port Interface Module) #3 (1-based). + */ imux42: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux96: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux97: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux98: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux99: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux100: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux101: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux102: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux103: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #3: connecting to PIM + * (Port Interface Module) #4 (1-based). + */ imux43: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux104: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux105: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux106: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux107: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux108: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux109: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux110: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux111: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #4: connecting to PIM + * (Port Interface Module) #5 (1-based). + */ imux44: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux112: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux113: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux114: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux115: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux116: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux117: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux118: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux119: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #5: connecting to PIM + * (Port Interface Module) #6 (1-based). + */ imux45: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux120: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux121: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux122: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux123: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux124: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux125: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux126: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux127: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #6: connecting to PIM + * (Port Interface Module) #7 (1-based). + */ imux46: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux129: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux132: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux133: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux134: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux135: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #7: connecting to PIM + * (Port Interface Module) #8 (1-based). + */ imux47: i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux136: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux137: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux138: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux139: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux140: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux141: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux142: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux143: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 2d44d9ad4e40..cd18641d5c23 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -82,11 +82,6 @@ status = "okay"; }; -&vuart { - // VUART Host Console - status = "okay"; -}; - &uart1 { // Host Console status = "okay"; @@ -196,6 +191,14 @@ use-ncsi; }; +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + &adc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts index 322587b7b67d..39c6be91d53f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts @@ -2,36 +2,16 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g4.dtsi" +#include "ast2400-facebook-netbmc-common.dtsi" / { model = "Facebook Wedge 100 BMC"; compatible = "facebook,wedge100-bmc", "aspeed,ast2400"; - aliases { - /* - * Override the default uart aliases to avoid breaking - * the legacy applications. - */ - serial0 = &uart5; - serial1 = &uart1; - serial2 = &uart3; - serial3 = &uart4; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; }; - - memory@40000000 { - reg = <0x40000000 0x20000000>; - }; -}; - -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; }; &wdt2 { @@ -40,108 +20,38 @@ }; &fmc { - status = "okay"; - flash@0 { + flash@1 { status = "okay"; m25p,fast-read; - label = "fmc0"; -#include "facebook-bmc-flash-layout.dtsi" + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; }; }; -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; -}; - -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default>; -}; - -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - &i2c7 { - status = "okay"; - i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; }; }; -&i2c8 { - status = "okay"; -}; - &i2c9 { status = "okay"; }; -&i2c10 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&i2c13 { - status = "okay"; -}; &vhub { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 8c426ba2f8ab..2dcfeae3c92a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -2,137 +2,27 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g4.dtsi" +#include "ast2400-facebook-netbmc-common.dtsi" / { model = "Facebook Wedge 40 BMC"; compatible = "facebook,wedge40-bmc", "aspeed,ast2400"; - aliases { - /* - * Override the default uart aliases to avoid breaking - * the legacy applications. - */ - serial0 = &uart5; - serial1 = &uart1; - serial2 = &uart3; - serial3 = &uart4; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; }; - memory@40000000 { - reg = <0x40000000 0x20000000>; - }; - ast-adc-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>; }; }; -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - &wdt2 { status = "disabled"; }; -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "spi0.0"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; -}; - -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default - &pinctrl_ndts4_default>; -}; - -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&vhub { - status = "okay"; -}; - &adc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts index ad1fcad3676c..63a3dd548f30 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts @@ -124,8 +124,8 @@ * "data0" partition (4MB) is reserved for persistent * data store. */ - data0@3800000 { - reg = <0x7c00000 0x800000>; + data0@7c00000 { + reg = <0x7c00000 0x400000>; label = "data0"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts new file mode 100644 index 000000000000..291f7d6c9979 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 IBM Corp. +/dts-v1/; + +#include "aspeed-bmc-ibm-rainier.dts" + +/ { + model = "Rainier 4U"; +}; + +&i2c3 { + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; + +&fan0 { + tach-pulses = <4>; +}; + +&fan1 { + tach-pulses = <4>; +}; + +&fan2 { + tach-pulses = <4>; +}; + +&fan3 { + tach-pulses = <4>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 21ae880c7530..a4b77aec5424 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -8,7 +8,7 @@ #include <dt-bindings/leds/leds-pca955x.h> / { - model = "Rainier"; + model = "Rainier 2U"; compatible = "ibm,rainier-bmc", "aspeed,ast2600"; aliases { @@ -47,9 +47,18 @@ #size-cells = <1>; ranges; - flash_memory: region@B8000000 { + flash_memory: region@b8000000 { no-map; - reg = <0xB8000000 0x04000000>; /* 64M */ + reg = <0xb8000000 0x04000000>; /* 64M */ + }; + + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ }; vga_memory: region@bf000000 { @@ -258,6 +267,7 @@ cfam0_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -274,6 +284,7 @@ cfam0_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -370,6 +381,7 @@ cfam1_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -386,6 +398,7 @@ cfam1_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -480,6 +493,7 @@ cfam2_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -496,6 +510,7 @@ cfam2_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -594,16 +609,6 @@ compatible = "ibm,cffps"; reg = <0x69>; }; - - power-supply@6a { - compatible = "ibm,cffps"; - reg = <0x6a>; - }; - - power-supply@6b { - compatible = "ibm,cffps"; - reg = <0x6b>; - }; }; &i2c4 { @@ -723,25 +728,25 @@ #address-cells = <1>; #size-cells = <0>; - fan@0 { + fan0: fan@0 { compatible = "pmbus-fan"; reg = <0>; tach-pulses = <2>; }; - fan@1 { + fan1: fan@1 { compatible = "pmbus-fan"; reg = <1>; tach-pulses = <2>; }; - fan@2 { + fan2: fan@2 { compatible = "pmbus-fan"; reg = <2>; tach-pulses = <2>; }; - fan@3 { + fan3: fan@3 { compatible = "pmbus-fan"; reg = <3>; tach-pulses = <2>; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 1deb30ec912c..6e9baf3bba53 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -22,9 +22,9 @@ #size-cells = <1>; ranges; - vga_memory: framebuffer@7f000000 { + vga_memory: framebuffer@9f000000 { no-map; - reg = <0x7f000000 0x01000000>; + reg = <0x9f000000 0x01000000>; /* 16M */ }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 4d070d6ba09f..c1478d2db602 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -26,11 +26,20 @@ #size-cells = <1>; ranges; - flash_memory: region@ba000000 { + flash_memory: region@b8000000 { no-map; reg = <0xb8000000 0x4000000>; /* 64M */ }; + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + vga_memory: region@bf000000 { no-map; compatible = "shared-dma-pool"; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 74367ee96f20..b87b034ff39e 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -363,7 +363,7 @@ #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2600-gpio"; - reg = <0x1e780000 0x800>; + reg = <0x1e780000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 208>; ngpios = <208>; diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi new file mode 100644 index 000000000000..73a5503be78c --- /dev/null +++ b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. +/dts-v1/; + +#include "aspeed-g4.dtsi" + +/ { + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; +}; + +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default + &pinctrl_ndts4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 7add151f6250..3b8812fcd854 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -48,48 +48,37 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - network_green { + led-1 { label = "pwm:green:network"; - pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - network_red { + led-2 { label = "pwm:red:network"; - pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_green { + led-3 { label = "pwm:green:user"; - pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_red { + led-4 { label = "pwm:red:user"; - pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; }; - - tcb_pwm: pwm { - compatible = "atmel,tcb-pwm"; - #pwm-cells = <3>; - tc-block = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa0 - &pinctrl_tcb1_tioa1 - &pinctrl_tcb1_tioa2 - &pinctrl_tcb1_tiob0>; - }; }; &tcb0 { @@ -104,6 +93,32 @@ }; }; +&tcb1 { + tcb1_pwm0: pwm@0 { + compatible = "atmel,tcb-pwm"; + reg = <0>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>; + }; + + tcb1_pwm1: pwm@1 { + compatible = "atmel,tcb-pwm"; + reg = <1>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa1>; + }; + + tcb1_pwm2: pwm@2 { + compatible = "atmel,tcb-pwm"; + reg = <2>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa2>; + }; +}; + &ebi { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi index 25f761065106..c08834ddf07b 100644 --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -58,24 +58,24 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - blue { + led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; linux,default-trigger = "none"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led-3 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 0da1f0557eaf..2799b2a1f4d2 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -15,40 +15,40 @@ model = "Overkiz KIZBOX3-HS"; compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; - pwm_leds { + led-controller-1 { status = "okay"; - red { + led-1 { status = "okay"; }; - green { + led-2 { status = "okay"; }; - blue { + led-3 { status = "okay"; }; - white { + led-4 { status = "okay"; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_red &pinctrl_led_white>; status = "okay"; - red { + led-5 { label = "pio:red:user"; gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - white { + led-6 { label = "pio:white:user"; gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 7c3076e245ef..9ce513dd514b 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -62,7 +62,7 @@ regulator-always-on; }; - pwm_leds { + led-controller-1 { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_pwm_h0 @@ -71,7 +71,7 @@ &pinctrl_pwm0_pwm_h3>; status = "disabled"; - red { + led-1 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; @@ -79,7 +79,7 @@ status = "disabled"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; @@ -87,14 +87,14 @@ status = "disabled"; }; - blue { + led-3 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; status = "disabled"; }; - white { + led-4 { label = "pwm:white:user"; pwms = <&pwm0 3 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi index d37724c10695..9c622892c692 100644 --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -54,10 +54,10 @@ }; }; - leds: pwm_leds { + leds: led-controller-1 { compatible = "pwm-leds"; - led_blue: pwm_blue { + led_blue: led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; @@ -65,14 +65,14 @@ status = "disabled"; }; - led_green: pwm_green { + led_green: led-2 { label = "pwm:green:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - led_red: pwm_red { + led_red: led-3 { label = "pwm:red:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index eae28b82c7fd..73b6b1f89de9 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -569,11 +569,14 @@ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; }; -}; /* pinctrl */ -&pmc { - atmel,osc-bypass; -}; + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; /* pinctrl */ &pwm0 { pinctrl-names = "default"; @@ -684,6 +687,8 @@ atmel,vbus-gpio = <0 &pioD 15 GPIO_ACTIVE_HIGH &pioD 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index b1f994c0ae79..1b1163858b1d 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -100,7 +100,7 @@ status = "okay"; at24@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index cf13632edd44..5179258f9247 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -242,6 +242,11 @@ atmel,pins = <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; }; @@ -259,6 +264,8 @@ &pioE 3 GPIO_ACTIVE_LOW &pioE 4 GPIO_ACTIVE_LOW >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index e5974a17374c..0b3ad1b580b8 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -134,6 +134,11 @@ atmel,pins = <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_key_gpio: key_gpio_0 { atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; @@ -159,6 +164,8 @@ &pioE 11 GPIO_ACTIVE_HIGH &pioE 14 GPIO_ACTIVE_HIGH >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts index 106f23ba4a3b..b76a6b5ac464 100644 --- a/arch/arm/boot/dts/at91-smartkiz.dts +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -84,10 +84,8 @@ status = "okay"; }; -&leds { - blue { - status = "okay"; - }; +&led_blue { + status = "okay"; }; &adc0 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 82c5d7fd9811..019f1c3d4d30 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -697,8 +697,6 @@ }; adc0: adc@fffe0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; @@ -708,29 +706,6 @@ atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <15>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "timer-counter-0"; - trigger-value = <0x1>; - }; - trigger1 { - trigger-name = "timer-counter-1"; - trigger-value = <0x3>; - }; - - trigger2 { - trigger-name = "timer-counter-2"; - trigger-value = <0x5>; - }; - - trigger3 { - trigger-name = "external"; - trigger-value = <0xd>; - trigger-external; - }; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 19fc748a87c5..2ab730fd6472 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -812,8 +812,6 @@ }; adc0: adc@fffb0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; @@ -822,31 +820,6 @@ atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; isi@fffb4000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9734667abbfc..b6256a20fbc7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -315,27 +315,27 @@ }; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - d8 { + led-1 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - d6 { + led-2 { label = "d6"; pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; - d7 { + led-3 { label = "d7"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 5653e70c84b4..730d1182c73e 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -266,8 +266,6 @@ }; adc0: adc@fffd0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9rl-adc"; reg = <0xfffd0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; @@ -277,29 +275,6 @@ atmel,adc-channels-used = <0x3f>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "timer-counter-0"; - trigger-value = <0x1>; - }; - trigger1 { - trigger-name = "timer-counter-1"; - trigger-value = <0x3>; - }; - - trigger2 { - trigger-name = "timer-counter-2"; - trigger-value = <0x5>; - }; - - trigger3 { - trigger-name = "external"; - trigger-value = <0x13>; - trigger-external; - }; }; usb0: gadget@fffd4000 { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 1590862f16f2..62981b39c815 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -218,26 +218,26 @@ }; }; - pwmleds { + led-controller-1 { compatible = "pwm-leds"; - ds1 { + led-1 { label = "ds1"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; - ds2 { + led-2 { label = "ds2"; pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; - ds3 { + led-3 { label = "ds3"; gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4cdb05079cc7..395e883644cd 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -795,8 +795,6 @@ }; adc0: adc@f804c000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; @@ -808,32 +806,6 @@ atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; spi0: spi@f0000000 { diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index dacaef2c14ca..0025c88f660c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -591,7 +591,6 @@ adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; - io-channel-ranges; adc-syscon = <&ts_adc_syscon>; clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index e895f7cb8c9f..b4d2cc70afb1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -385,12 +385,12 @@ clock-names = "apb_pclk"; }; - srab: srab@36000 { + srab: ethernet-switch@36000 { compatible = "brcm,nsp-srab"; reg = <0x36000 0x1000>, <0x3f308 0x8>, <0x3f410 0xc>; - reg-names = "srab", "mux_config", "sgmii"; + reg-names = "srab", "mux_config", "sgmii_config"; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, @@ -420,6 +420,10 @@ status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; i2c0: i2c@38000 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 09a1182c2936..403bacf986eb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -181,12 +181,14 @@ &hdmi0 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; &hdmi1 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index e2fd9610e125..20322de2f8bf 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 0ff0e9e25327..1409d1b559c1 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 810fc32f1895..5b4a481be4f4 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 7604b4480bb1..8636600385fd 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,17 +64,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index abd35a518046..51c64f0b2560 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -122,9 +122,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 4dcec6865469..2f2d2b0a6893 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,7 +117,3 @@ }; }; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 1ec655809e57..68aaf0af3945 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 04bfd58127fc..432254383769 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,17 +105,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 01c390ed48ea..12e34a0439b4 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -126,7 +126,3 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index e1bb8661955f..cba3d910bed8 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -9,3 +9,7 @@ clock-frequency = <125000000>; status = "okay"; }; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 0faae8950375..3725f2b0d60b 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -123,33 +123,13 @@ }; }; - mdio-bus-mux { - #address-cells = <1>; - #size-cells = <0>; + mdio-bus-mux@18003000 { /* BIT(9) = 1 => external mdio */ - mdio_ext: mdio@200 { + mdio@200 { reg = <0x200>; #address-cells = <1>; #size-cells = <0>; - }; - }; - - mdio-mii-mux { - compatible = "mdio-mux-mmioreg"; - mdio-parent-bus = <&mdio_ext>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1800c1c0 0x4>; - - /* BIT(6) = mdc, BIT(7) = mdio */ - mux-mask = <0xc0>; - - mdio-mii@0 { - /* Enable MII function */ - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; switch@0 { compatible = "brcm,bcm53125"; @@ -159,6 +139,8 @@ reset-names = "robo_reset"; reg = <0>; dsa,member = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_mdio>; ports { #address-cells = <1>; @@ -219,9 +201,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; label = "lan7"; @@ -242,6 +221,30 @@ label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@8 { reg = <8>; ethernet = <&gmac2>; @@ -268,3 +271,44 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x080000 0x0100000>; + }; + + partition@180000{ + label = "devinfo"; + reg = <0x0180000 0x080000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x0200000 0x01D00000>; + compatible = "brcm,trx"; + }; + + partition@1F00000 { + label = "failsafe"; + reg = <0x01F00000 0x01D00000>; + read-only; + }; + + partition@5200000 { + label = "system"; + reg = <0x05200000 0x02E00000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 068e384b8ab7..6fa101f0a90d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -59,9 +59,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 9ae815ddbb4b..4f8d777ae18d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -57,9 +57,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index a21b2d185596..e17e9a17fb00 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -108,9 +108,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 4d5c5aa7dc42..60cc87ecc7ec 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -71,6 +71,10 @@ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; +&usb3_phy { + status = "okay"; +}; + &spi_nor { status = "okay"; }; @@ -79,9 +83,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index cdc5ff593adb..2a8f7312d1be 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -8,6 +8,15 @@ / { }; +&pinctrl { + compatible = "brcm,bcm4709-pinmux"; + + pinmux_mdio: mdio { + groups = "mdio_grp"; + function = "mdio"; + }; +}; + &usb3_phy { compatible = "brcm,ns-bx-usb3-phy"; }; @@ -16,3 +25,7 @@ clock-frequency = <125000000>; status = "okay"; }; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ac3a99cf2079..7db72a2f1020 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -265,7 +265,7 @@ interrupt-parent = <&gic>; - ehci: ehci@21000 { + ehci: usb@21000 { #usb-cells = <0>; compatible = "generic-ehci"; @@ -287,7 +287,7 @@ }; }; - ohci: ohci@22000 { + ohci: usb@22000 { #usb-cells = <0>; compatible = "generic-ohci"; @@ -318,7 +318,7 @@ interrupt-parent = <&gic>; - xhci: xhci@23000 { + xhci: usb@23000 { #usb-cells = <0>; compatible = "generic-xhci"; @@ -428,7 +428,27 @@ #address-cells = <1>; #size-cells = <1>; - pin-controller@1c0 { + lcpll0: lcpll0@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", + "sdio", "ddr_phy"; + }; + + genpll: genpll@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", + "ethernetclk", + "usbclk", "iprocfast", + "sata1", "sata2"; + }; + + pinctrl: pin-controller@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; @@ -454,41 +474,26 @@ function = "uart1"; }; }; - }; - }; - - lcpll0: lcpll0@1800c100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; - reg = <0x1800c100 0x14>; - clocks = <&osc>; - clock-output-names = "lcpll0", "pcie_phy", "sdio", - "ddr_phy"; - }; - genpll: genpll@1800c140 { - #clock-cells = <1>; - compatible = "brcm,nsp-genpll"; - reg = <0x1800c140 0x24>; - clocks = <&osc>; - clock-output-names = "genpll", "phy", "ethernetclk", - "usbclk", "iprocfast", "sata1", - "sata2"; - }; - - thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; + thermal: thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; }; - srab: srab@18007000 { - compatible = "brcm,bcm5301x-srab"; + srab: ethernet-switch@18007000 { + compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; rng: rng@18004000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 4af8e3293cff..51546fccc616 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <1>; - ehci: ehci@4000 { + ehci: usb@4000 { compatible = "generic-ehci"; reg = <0x4000 0x1000>; interrupt-parent = <&gic>; @@ -155,7 +155,7 @@ }; }; - ohci: ohci@d000 { + ohci: usb@d000 { #usb-cells = <0>; compatible = "generic-ohci"; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 957468224622..52feca0fb906 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -69,9 +69,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "port0"; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 7be4c4e628e0..5443fc079e6e 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -178,3 +178,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58522-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index e58ed7e95346..e1e3c26cef19 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -190,3 +190,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 21f922dc6019..f161ba2e7e5e 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -210,3 +210,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index a49c2fd21f4a..83cb877d63db 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -176,9 +176,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index dd6dff6452b8..4e106ce1384a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -180,9 +180,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a71371b4065e..cda6cc281e18 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -195,9 +195,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7782b61c51a1..ffbff0014c65 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -216,9 +216,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index edd0f630e025..3fd39c479a3c 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -184,9 +184,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts index 2bb85a9b7614..df021f9b0117 100644 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -143,6 +143,7 @@ gpio_ext: gpio@20 { compatible = "nxp,pca9555"; reg = <0x20>; + gpio-controller; #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 4e1bbc0198eb..6ba6a1b50e00 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -932,7 +932,7 @@ }; }; - sham_target: target-module@4b101000 { + sham1_target: target-module@4b101000 { compatible = "ti,sysc-omap3-sham", "ti,sysc"; reg = <0x4b101100 0x4>, <0x4b101110 0x4>, @@ -951,7 +951,7 @@ #size-cells = <1>; ranges = <0x0 0x4b101000 0x1000>; - sham: sham@0 { + sham1: sham@0 { compatible = "ti,omap5-sham"; reg = <0 0x300>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -962,6 +962,36 @@ }; }; + sham2_target: target-module@42701000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x42701100 0x4>, + <0x42701110 0x4>, + <0x42701114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42701000 0x1000>; + + sham2: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 165 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + opp_supply_mpu: opp-supply@4a003b20 { compatible = "ti,omap5-opp-supply"; reg = <0x4a003b20 0xc>; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index 1dbf3bbff8d3..597ade3e252f 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -11,14 +11,14 @@ #size-cells = <1>; ranges; - mfc_left: region_mfc_left { + mfc_left: region-mfc-left { compatible = "shared-dma-pool"; no-map; size = <0x2400000>; alignment = <0x100000>; }; - mfc_right: region_mfc_right { + mfc_right: region-mfc-right { compatible = "shared-dma-pool"; no-map; size = <0x800000>; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index 20446a846a98..a1e22f630638 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -37,3 +37,29 @@ &serial_2 { status = "okay"; }; + +&spi_0 { + status = "okay"; + cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>; + + assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>, + <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>; + assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */ + <&cmu CLK_MOUT_SPI0>, /* for: CLK_DIV_SPI0 */ + <&cmu CLK_DIV_SPI0>, /* for: CLK_DIV_SPI0_PRE */ + <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */ + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 12887b3924af..04290ec4583a 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -76,7 +76,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index c1a68e612037..69451566945d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -34,10 +34,10 @@ reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -197,7 +197,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index b55afaaa691e..a26e3e582a7e 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -38,10 +38,10 @@ reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -267,7 +267,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index a1e93fb7f694..77ab7193b903 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -439,7 +439,6 @@ clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; @@ -691,25 +690,25 @@ status = "disabled"; }; - ppmu_dmc0: ppmu_dmc0@106a0000 { + ppmu_dmc0: ppmu@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; status = "disabled"; }; - ppmu_dmc1: ppmu_dmc1@106b0000 { + ppmu_dmc1: ppmu@106b0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106b0000 0x2000>; status = "disabled"; }; - ppmu_cpu: ppmu_cpu@106c0000 { + ppmu_cpu: ppmu@106c0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106c0000 0x2000>; status = "disabled"; }; - ppmu_rightbus: ppmu_rightbus@112a0000 { + ppmu_rightbus: ppmu@112a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x112a0000 0x2000>; clocks = <&cmu CLK_PPMURIGHT>; @@ -717,7 +716,7 @@ status = "disabled"; }; - ppmu_leftbus: ppmu_leftbus0@116a0000 { + ppmu_leftbus: ppmu@116a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x116a0000 0x2000>; clocks = <&cmu CLK_PPMULEFT>; @@ -725,7 +724,7 @@ status = "disabled"; }; - ppmu_camif: ppmu_camif@11ac0000 { + ppmu_camif: ppmu@11ac0000 { compatible = "samsung,exynos-ppmu"; reg = <0x11ac0000 0x2000>; clocks = <&cmu CLK_PPMUCAMIF>; @@ -733,7 +732,7 @@ status = "disabled"; }; - ppmu_lcd0: ppmu_lcd0@11e40000 { + ppmu_lcd0: ppmu@11e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x11e40000 0x2000>; clocks = <&cmu CLK_PPMULCD0>; @@ -741,7 +740,7 @@ status = "disabled"; }; - ppmu_fsys: ppmu_fsys@12630000 { + ppmu_fsys: ppmu@12630000 { compatible = "samsung,exynos-ppmu"; reg = <0x12630000 0x2000>; clocks = <&cmu CLK_PPMUFILE>; @@ -749,7 +748,7 @@ status = "disabled"; }; - ppmu_g3d: ppmu_g3d@13220000 { + ppmu_g3d: ppmu@13220000 { compatible = "samsung,exynos-ppmu"; reg = <0x13220000 0x2000>; clocks = <&cmu CLK_PPMUG3D>; @@ -757,7 +756,7 @@ status = "disabled"; }; - ppmu_mfc: ppmu_mfc@13660000 { + ppmu_mfc: ppmu@13660000 { compatible = "samsung,exynos-ppmu"; reg = <0x13660000 0x2000>; clocks = <&cmu CLK_PPMUMFC_L>; @@ -765,7 +764,7 @@ status = "disabled"; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&cmu_dmc CLK_DIV_DMC>; clock-names = "bus"; @@ -773,9 +772,8 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -799,7 +797,7 @@ }; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDL>; clock-names = "bus"; @@ -807,7 +805,7 @@ status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDR>; clock-names = "bus"; @@ -815,7 +813,7 @@ status = "disabled"; }; - bus_lcd0: bus_lcd0 { + bus_lcd0: bus-lcd0 { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_160>; clock-names = "bus"; @@ -823,7 +821,7 @@ status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_200>; clock-names = "bus"; @@ -831,7 +829,7 @@ status = "disabled"; }; - bus_mcuisp: bus_mcuisp { + bus_mcuisp: bus-mcuisp { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; clock-names = "bus"; @@ -839,7 +837,7 @@ status = "disabled"; }; - bus_isp: bus_isp { + bus_isp: bus-isp { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_266>; clock-names = "bus"; @@ -847,7 +845,7 @@ status = "disabled"; }; - bus_peril: bus_peril { + bus_peril: bus-peril { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_100>; clock-names = "bus"; @@ -855,7 +853,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_SCLK_MFC>; clock-names = "bus"; @@ -863,9 +861,8 @@ status = "disabled"; }; - bus_leftbus_opp_table: opp_table2 { + bus_leftbus_opp_table: opp-table2 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -889,9 +886,8 @@ }; }; - bus_mcuisp_opp_table: opp_table3 { + bus_mcuisp_opp_table: opp-table3 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -910,9 +906,8 @@ }; }; - bus_isp_opp_table: opp_table4 { + bus_isp_opp_table: opp-table4 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -931,9 +926,8 @@ }; }; - bus_peril_opp_table: opp_table5 { + bus_peril_opp_table: opp-table5 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a1e54449f33f..eab77a66ae8f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -782,7 +782,7 @@ status = "disabled"; }; - ppmu_dmc0: ppmu_dmc0@106a0000 { + ppmu_dmc0: ppmu@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; clocks = <&clock CLK_PPMUDMC0>; @@ -790,7 +790,7 @@ status = "disabled"; }; - ppmu_dmc1: ppmu_dmc1@106b0000 { + ppmu_dmc1: ppmu@106b0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106b0000 0x2000>; clocks = <&clock CLK_PPMUDMC1>; @@ -798,7 +798,7 @@ status = "disabled"; }; - ppmu_cpu: ppmu_cpu@106c0000 { + ppmu_cpu: ppmu@106c0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106c0000 0x2000>; clocks = <&clock CLK_PPMUCPU>; @@ -806,7 +806,7 @@ status = "disabled"; }; - ppmu_rightbus: ppmu_rightbus@112a0000 { + ppmu_rightbus: ppmu@112a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x112a0000 0x2000>; clocks = <&clock CLK_PPMURIGHT>; @@ -814,7 +814,7 @@ status = "disabled"; }; - ppmu_leftbus: ppmu_leftbus0@116a0000 { + ppmu_leftbus: ppmu@116a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x116a0000 0x2000>; clocks = <&clock CLK_PPMULEFT>; @@ -822,7 +822,7 @@ status = "disabled"; }; - ppmu_camif: ppmu_camif@11ac0000 { + ppmu_camif: ppmu@11ac0000 { compatible = "samsung,exynos-ppmu"; reg = <0x11ac0000 0x2000>; clocks = <&clock CLK_PPMUCAMIF>; @@ -830,7 +830,7 @@ status = "disabled"; }; - ppmu_lcd0: ppmu_lcd0@11e40000 { + ppmu_lcd0: ppmu@11e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x11e40000 0x2000>; clocks = <&clock CLK_PPMULCD0>; @@ -838,13 +838,13 @@ status = "disabled"; }; - ppmu_fsys: ppmu_g3d@12630000 { + ppmu_fsys: ppmu@12630000 { compatible = "samsung,exynos-ppmu"; reg = <0x12630000 0x2000>; status = "disabled"; }; - ppmu_image: ppmu_image@12aa0000 { + ppmu_image: ppmu@12aa0000 { compatible = "samsung,exynos-ppmu"; reg = <0x12aa0000 0x2000>; clocks = <&clock CLK_PPMUIMAGE>; @@ -852,7 +852,7 @@ status = "disabled"; }; - ppmu_tv: ppmu_tv@12e40000 { + ppmu_tv: ppmu@12e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x12e40000 0x2000>; clocks = <&clock CLK_PPMUTV>; @@ -860,7 +860,7 @@ status = "disabled"; }; - ppmu_g3d: ppmu_g3d@13220000 { + ppmu_g3d: ppmu@13220000 { compatible = "samsung,exynos-ppmu"; reg = <0x13220000 0x2000>; clocks = <&clock CLK_PPMUG3D>; @@ -868,7 +868,7 @@ status = "disabled"; }; - ppmu_mfc_left: ppmu_mfc_left@13660000 { + ppmu_mfc_left: ppmu@13660000 { compatible = "samsung,exynos-ppmu"; reg = <0x13660000 0x2000>; clocks = <&clock CLK_PPMUMFC_L>; @@ -876,7 +876,7 @@ status = "disabled"; }; - ppmu_mfc_right: ppmu_mfc_right@13670000 { + ppmu_mfc_right: ppmu@13670000 { compatible = "samsung,exynos-ppmu"; reg = <0x13670000 0x2000>; clocks = <&clock CLK_PPMUMFC_R>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 5370ee477186..a0c3bab382ae 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -329,7 +329,7 @@ pinctrl-0 = <&i2c3_bus>; pinctrl-names = "default"; - mxt224-touchscreen@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; @@ -348,7 +348,7 @@ pinctrl-0 = <&i2c5_bus>; pinctrl-names = "default"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; @@ -597,7 +597,7 @@ pinctrl-0 = <&i2c7_bus>; pinctrl-names = "default"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 7d2cfbafefb2..1c5394152561 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -43,7 +43,7 @@ enable-active-high; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; up { @@ -171,7 +171,7 @@ pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index c5609afa6101..d5797a67bf48 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -90,61 +90,61 @@ pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <3>; linux,code = <2>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <4>; linux,code = <3>; }; - key_3 { + key-3 { keypad,row = <0>; keypad,column = <5>; linux,code = <4>; }; - key_4 { + key-4 { keypad,row = <0>; keypad,column = <6>; linux,code = <5>; }; - key_5 { + key-5 { keypad,row = <0>; keypad,column = <7>; linux,code = <6>; }; - key_a { + key-a { keypad,row = <1>; keypad,column = <3>; linux,code = <30>; }; - key_b { + key-b { keypad,row = <1>; keypad,column = <4>; linux,code = <48>; }; - key_c { + key-c { keypad,row = <1>; keypad,column = <5>; linux,code = <46>; }; - key_d { + key-d { keypad,row = <1>; keypad,column = <6>; linux,code = <32>; }; - key_e { + key-e { keypad,row = <1>; keypad,column = <7>; linux,code = <18>; @@ -200,7 +200,7 @@ cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>; status = "okay"; - w25x80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25x80"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a226bec56a45..d2406c9146b8 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -263,7 +263,7 @@ pinctrl-names = "default"; status = "okay"; - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpx0>; @@ -283,7 +283,7 @@ pinctrl-names = "default"; status = "okay"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; @@ -462,6 +462,26 @@ }; }; +&pinctrl_1 { + bt_shutdown: bt-shutdown { + samsung,pins = "gpl1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; @@ -512,6 +532,17 @@ &serial_0 { status = "okay"; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 08284e8f3624..dd44ad2c6ad6 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -532,6 +532,24 @@ }; &pinctrl_1 { + bt_shutdown: bt-shutdown { + samsung,pins = "gpe1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + lp3974_irq: lp3974-irq { samsung,pins = "gpx0-7", "gpx2-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -608,6 +626,17 @@ status = "okay"; /delete-property/dmas; /delete-property/dma-names; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index fddc661ded28..70baad9b11f0 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -168,13 +168,13 @@ iommus = <&sysmmu_g2d>; }; - ppmu_acp: ppmu_acp@10ae0000 { + ppmu_acp: ppmu@10ae0000 { compatible = "samsung,exynos-ppmu"; reg = <0x10ae0000 0x2000>; status = "disabled"; }; - ppmu_lcd1: ppmu_lcd1@12240000 { + ppmu_lcd1: ppmu@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; clocks = <&clock CLK_PPMULCD1>; @@ -204,7 +204,7 @@ #iommu-cells = <0>; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_DMC>; clock-names = "bus"; @@ -212,7 +212,7 @@ status = "disabled"; }; - bus_acp: bus_acp { + bus_acp: bus-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_ACP>; clock-names = "bus"; @@ -220,7 +220,7 @@ status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK100>; clock-names = "bus"; @@ -228,7 +228,7 @@ status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK133>; clock-names = "bus"; @@ -236,7 +236,7 @@ status = "disabled"; }; - bus_display: bus_display { + bus_display: bus-display { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK160>; clock-names = "bus"; @@ -244,7 +244,7 @@ status = "disabled"; }; - bus_lcd0: bus_lcd0 { + bus_lcd0: bus-lcd0 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK200>; clock-names = "bus"; @@ -252,7 +252,7 @@ status = "disabled"; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDL>; clock-names = "bus"; @@ -260,7 +260,7 @@ status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDR>; clock-names = "bus"; @@ -268,7 +268,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_SCLK_MFC>; clock-names = "bus"; @@ -276,7 +276,7 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -295,7 +295,7 @@ }; }; - bus_acp_opp_table: opp_table2 { + bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; opp-shared; @@ -310,7 +310,7 @@ }; }; - bus_peri_opp_table: opp_table3 { + bus_peri_opp_table: opp-table3 { compatible = "operating-points-v2"; opp-shared; @@ -322,7 +322,7 @@ }; }; - bus_fsys_opp_table: opp_table4 { + bus_fsys_opp_table: opp-table4 { compatible = "operating-points-v2"; opp-shared; @@ -334,7 +334,7 @@ }; }; - bus_display_opp_table: opp_table5 { + bus_display_opp_table: opp-table5 { compatible = "operating-points-v2"; opp-shared; @@ -349,7 +349,7 @@ }; }; - bus_leftbus_opp_table: opp_table6 { + bus_leftbus_opp_table: opp-table6 { compatible = "operating-points-v2"; opp-shared; @@ -463,7 +463,7 @@ "ppmmu3"; operating-points-v2 = <&gpu_opp_table>; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 89ed81fb348d..c14e37dc3a9b 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,7 +15,7 @@ i2c10 = &i2c_cm36651; }; - aat1290 { + led-controller { compatible = "skyworks,aat1290"; flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; @@ -58,9 +58,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -75,7 +74,7 @@ #address-cells = <1>; #size-cells = <0>; - cm36651@18 { + light-sensor@18 { compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; @@ -133,7 +132,7 @@ }; &i2c_3 { - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index f6d0a5f5d339..47431307cb3c 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -175,7 +175,7 @@ pinctrl-names = "default"; status = "okay"; - codec: wm8960@1a { + codec: audio-codec@1a { compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index dfceb155b3a7..4583d342af39 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -134,7 +134,7 @@ pinctrl-names = "default"; status = "okay"; - s5m8767: s5m8767-pmic@66 { + s5m8767: pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 7e7c243ff196..111c32bae02c 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -169,9 +169,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693@66 { + pmic@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; @@ -193,7 +192,7 @@ }; }; - max77693_haptic { + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; @@ -218,9 +217,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693-fuel-gauge@36 { + fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; @@ -262,7 +260,6 @@ pinctrl-0 = <&i2c_mhl_bus>; pinctrl-names = "default"; - status = "okay"; sii9234: hdmi-bridge@39 { compatible = "sil,sii9234"; @@ -550,7 +547,7 @@ pinctrl-names = "default"; status = "okay"; - s5c73m3: s5c73m3@3c { + s5c73m3: image-sensor@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ @@ -577,7 +574,7 @@ pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; - s5k6a3@10 { + image-sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; @@ -616,7 +613,7 @@ pinctrl-names = "default"; status = "okay"; - wm1811: wm1811@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&pmu_system_controller 0>, @@ -665,7 +662,7 @@ pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -1109,6 +1106,21 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; + bt_shutdown: bt-shutdown { + samsung,pins = "gpl0-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + max77686_irq: max77686-irq { samsung,pins = "gpx0-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -1386,7 +1398,20 @@ }; &serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + max-speed = <3000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + }; }; &serial_1 { @@ -1407,7 +1432,7 @@ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3@0 { + s5c73m3_spi: image-sensor@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index a47b7f35fc80..c49dbb7847b8 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -45,7 +45,7 @@ pinctrl-names = "default"; status = "okay"; - mms152-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms152"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 2983e91bc7dd..2b20d9095d9f 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -22,12 +22,12 @@ reg = <0x0204F000 0x1000>; }; - gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_power_key>; - power_key { + power-key { gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -171,7 +171,7 @@ }; &pinctrl_1 { - gpio_power_key: power_key { + gpio_power_key: power-key { samsung,pins = "gpx1-3"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; @@ -255,7 +255,6 @@ }; &hsotg { - dr_mode = "peripheral"; status = "okay"; vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -266,7 +265,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb3503@8 { + usb3503: usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -492,7 +491,7 @@ &i2c_1 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index b8549d846f86..efaf7533e84f 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -16,11 +16,24 @@ model = "Hardkernel ODROID-U3 board based on Exynos4412"; compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x7FF00000>; }; + vbus_otg_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_VDD_5.0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; led1 { @@ -101,8 +114,21 @@ }; &ehci { + #address-cells = <1>; + #size-cells = <0>; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; + + ethernet: usbether@2 { + compatible = "usb0424,9730"; + reg = <2>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; +}; + +&hsotg { + dr_mode = "otg"; + vbus-supply = <&vbus_otg_reg>; }; &sound { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 3ea2a0101e80..0e9d626e740a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -15,6 +15,10 @@ model = "Hardkernel ODROID-X board based on Exynos4412"; compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x3FF00000>; @@ -36,19 +40,7 @@ }; }; - gpio_keys { - pinctrl-0 = <&gpio_power_key &gpio_home_key>; - - home_key { - gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_HOME>; - label = "home key"; - debounce-interval = <10>; - wakeup-source; - }; - }; - - regulator_p3v3 { + regulator-1 { compatible = "regulator-fixed"; regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; @@ -72,8 +64,46 @@ }; &ehci { + #address-cells = <1>; + #size-cells = <0>; phys = <&exynos_usbphy 2>; phy-names = "hsic0"; + + hub@2 { + compatible = "usb0424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; + }; +}; + +&gpio_keys { + pinctrl-0 = <&gpio_power_key &gpio_home_key>; + + home-key { + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_HOME>; + label = "home key"; + debounce-interval = <10>; + wakeup-source; + }; +}; + +&hsotg { + dr_mode = "peripheral"; }; &mshc_0 { @@ -81,7 +111,7 @@ }; &pinctrl_1 { - gpio_home_key: home_key { + gpio_home_key: home-key { samsung,pins = "gpx2-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index c2e793b69e7d..e1f6de53e20e 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -116,7 +116,7 @@ pinctrl-names = "default"; status = "okay"; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; @@ -453,37 +453,37 @@ pinctrl-names = "default"; status = "okay"; - key_home { + key-home { keypad,row = <0>; keypad,column = <0>; linux,code = <KEY_HOME>; }; - key_down { + key-down { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_DOWN>; }; - key_up { + key-up { keypad,row = <1>; keypad,column = <0>; linux,code = <KEY_UP>; }; - key_menu { + key-menu { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_MENU>; }; - key_back { + key-back { keypad,row = <2>; keypad,column = <0>; linux,code = <KEY_BACK>; }; - key_enter { + key-enter { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_ENTER>; diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts new file mode 100644 index 000000000000..9f559425bd2c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Galaxy Note 10.1 - N801x (wifi only version) + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412-p4note.dtsi" + +/ { + model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412"; + compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + + /* this is the base variant without any kind of modem */ +}; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi new file mode 100644 index 000000000000..b2f9d5448a18 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -0,0 +1,1132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based p4note device family base DT. + * Based on exynos4412-midas.dtsi. + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/samsung.h> + +/ { + compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + chosen { + stdout-path = &serial_2; + }; + + firmware@204f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-down { + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + }; + + voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO1"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_1>; + gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO2"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_2>; + gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO3"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_3>; + gpios = <&gpb 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + regulator-always-on; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&wifi_reset>; + pinctrl-names = "default"; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + pinctrl-0 = <&ak8975_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpm4>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + pinctrl-0 = <&fuel_alert_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4300>; + }; + }; + + i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + adc@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + pinctrl-0 = <&stmpe_adc_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpx0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + irq-trigger = <0x1>; + st,adc-freq = <3>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <3>; + + stmpe_adc { + compatible = "st,stmpe-adc"; + #io-channel-cells = <1>; + st,norequest-mask = <0x2F>; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + /* not verified */ + status = "okay"; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_display { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + timing0 { + clock-frequency = <66666666>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <18>; + hback-porch = <36>; + hsync-len = <16>; + vback-porch = <16>; + vfront-porch = <4>; + vsync-len = <3>; + hsync-active = <1>; + }; + }; +}; + +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-0 = <&tsp_rst &tsp_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_NONE>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-always-on; + }; + + /* WM8994 audio */ + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-always-on; + }; + + /* CSI IP block */ + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* IR LED on/off */ + ldo9_reg: LDO9 { + regulator-name = "VLED_IC_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* CSI IP block */ + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VABB1_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* USB OTG */ + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* not connected */ + ldo13_reg: LDO13 { + regulator-name = "ldo13"; + }; + + ldo14_reg: LDO14 { + regulator-name = "VABB2_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "ldo15"; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "ldo16"; + regulator-always-on; + }; + + /* not connected */ + ldo17_reg: LDO17 { + regulator-name = "ldo17"; + }; + + /* Camera ISX012 */ + ldo18_reg: LDO18 { + regulator-name = "CAM_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera S5K6A3 */ + ldo19_reg: LDO19 { + regulator-name = "VT_CORE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* not connected */ + ldo20_reg: LDO20 { + regulator-name = "ldo20"; + }; + + /* MMC2 */ + ldo21_reg: LDO21 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + /* not connected */ + ldo22_reg: LDO22 { + regulator-name = "ldo22"; + }; + + /* ADC */ + ldo23_reg: LDO23 { + regulator-name = "VDD_ADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera S5K6A3 */ + ldo24_reg: LDO24 { + regulator-name = "CAM_A2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo25_reg: LDO25 { + regulator-name = "VLED_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera ISX012 */ + ldo26_reg: LDO26 { + regulator-name = "3MP_AF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_INT"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_G3D"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1075000>; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-always-on; + }; + + /* not connected */ + buck8_reg: BUCK8 { + regulator-name = "buck8"; + }; + + buck9_reg: BUCK9 { + regulator-name = "3MP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&mshc_0 { + broken-cd; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + status = "okay"; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + tsp_reg_gpio_2: tsp-reg-gpio-2 { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_reg_gpio_3: tsp-reg-gpio-3 { + samsung,pins = "gpb-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, DOWN); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, UP); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, UP); + PIN_SLP(gpc1-3, INPUT, UP); + PIN_SLP(gpc1-4, INPUT, UP); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, OUT0, NONE); + PIN_SLP(gpf3-5, OUT0, NONE); + + PIN_SLP(gpj0-0, INPUT, DOWN); + PIN_SLP(gpj0-1, INPUT, DOWN); + PIN_SLP(gpj0-2, INPUT, DOWN); + PIN_SLP(gpj0-3, PREV, NONE); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, OUT0, NONE); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, OUT0, NONE); + + PIN_SLP(gpj1-0, OUT0, NONE); + PIN_SLP(gpj1-1, INPUT, DOWN); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, OUT0, NONE); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sd3_wifi: sd3-wifi { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_shutdown: bt-shutdown { + samsung,pins = "gpl0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart_sel: uart-sel { + samsung,pins = "gpl2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-val = <1>; + /* 0 = CP, 1 = AP (serial output) */ + }; + + tsp_rst: tsp-rst { + samsung,pins = "gpm0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_irq: tsp-irq { + samsung,pins = "gpm2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + wifi_reset: wifi-reset { + samsung,pins = "gpm3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_reg_gpio_1: tsp-reg-gpio-1 { + samsung,pins = "gpm4-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + ak8975_irq: ak8975-irq { + samsung,pins = "gpm4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + stmpe_adc_irq: stmpe-adc-irq { + samsung,pins = "gpx0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + gpio_keys: gpio-keys { + samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + fuel_alert_irq: fuel-alert-irq { + samsung,pins = "gpx2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gpx2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sdhci2_cd: sdhci2-cd { + samsung,pins = "gpx3-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, PREV, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, OUT0, NONE); + PIN_SLP(gpl0-1, INPUT, NONE); + PIN_SLP(gpl0-2, INPUT, NONE); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, OUT0, NONE); + PIN_SLP(gpl1-1, OUT0, NONE); + + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, OUT0, NONE); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, PREV, NONE); + + PIN_SLP(gpm0-0, PREV, NONE); + PIN_SLP(gpm0-1, OUT0, NONE); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, NONE); + PIN_SLP(gpm0-4, OUT0, NONE); + PIN_SLP(gpm0-5, OUT0, NONE); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, OUT0, NONE); + + PIN_SLP(gpm1-0, INPUT, NONE); + PIN_SLP(gpm1-1, INPUT, NONE); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, OUT0, NONE); + PIN_SLP(gpm2-3, OUT0, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, OUT0, DOWN); + PIN_SLP(gpm3-5, PREV, NONE); + PIN_SLP(gpm3-6, PREV, NONE); + PIN_SLP(gpm3-7, OUT0, NONE); + + PIN_SLP(gpm4-0, INPUT, NONE); + PIN_SLP(gpm4-1, INPUT, NONE); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, PREV, NONE); + PIN_SLP(gpm4-5, OUT0, NONE); + PIN_SLP(gpm4-6, OUT0, NONE); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, NONE); + PIN_SLP(gpy0-3, INPUT, NONE); + PIN_SLP(gpy0-4, INPUT, NONE); + PIN_SLP(gpy0-5, INPUT, NONE); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + PIN_SLP(gpv4-1, INPUT, DOWN); + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&rtc { + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + + max-speed = <2000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "lpo"; + }; +}; + +&serial_2 { + pinctrl-0 = <&uart_sel>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 49971203a8aa..cc99b955af0c 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -71,61 +71,61 @@ pinctrl-names = "default"; status = "okay"; - key_1 { + key-1 { keypad,row = <1>; keypad,column = <3>; linux,code = <2>; }; - key_2 { + key-2 { keypad,row = <1>; keypad,column = <4>; linux,code = <3>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <5>; linux,code = <4>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <6>; linux,code = <5>; }; - key_5 { + key-5 { keypad,row = <1>; keypad,column = <7>; linux,code = <6>; }; - key_A { + key-A { keypad,row = <2>; keypad,column = <6>; linux,code = <30>; }; - key_B { + key-B { keypad,row = <2>; keypad,column = <7>; linux,code = <48>; }; - key_C { + key-C { keypad,row = <0>; keypad,column = <5>; linux,code = <46>; }; - key_D { + key-D { keypad,row = <2>; keypad,column = <5>; linux,code = <32>; }; - key_E { + key-E { keypad,row = <0>; keypad,column = <7>; linux,code = <18>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e76881dc0014..a142fe84010b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -274,7 +274,6 @@ clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; @@ -378,15 +377,17 @@ #iommu-cells = <0>; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_DMC>; clock-names = "bus"; operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_acp: bus_acp { + bus_acp: bus-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_ACP>; clock-names = "bus"; @@ -394,7 +395,7 @@ status = "disabled"; }; - bus_c2c: bus_c2c { + bus_c2c: bus-c2c { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_C2C>; clock-names = "bus"; @@ -404,7 +405,6 @@ bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -431,7 +431,6 @@ bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -447,15 +446,17 @@ }; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDL>; clock-names = "bus"; operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&bus_dmc>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDR>; clock-names = "bus"; @@ -463,15 +464,17 @@ status = "disabled"; }; - bus_display: bus_display { + bus_display: bus-display { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK160>; clock-names = "bus"; operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&bus_leftbus &bus_dmc>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK133>; clock-names = "bus"; @@ -479,7 +482,7 @@ status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK100>; clock-names = "bus"; @@ -487,7 +490,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_SCLK_MFC>; clock-names = "bus"; @@ -497,7 +500,6 @@ bus_leftbus_opp_table: opp-table3 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -520,7 +522,6 @@ bus_display_opp_table: opp-table4 { compatible = "operating-points-v2"; - opp-shared; opp-160000000 { opp-hz = /bits/ 64 <160000000>; @@ -532,7 +533,6 @@ bus_fsys_opp_table: opp-table5 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -544,7 +544,6 @@ bus_peri_opp_table: opp-table6 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -773,6 +772,7 @@ clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + interconnects = <&bus_display &bus_dmc>; }; &pmu { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 79546f11af26..a161f6237c7f 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -27,7 +27,7 @@ stdout-path = "serial2:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; menu { @@ -211,7 +211,7 @@ samsung,i2c-max-bus-freq = <20000>; samsung,i2c-slave-addr = <0x66>; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; @@ -511,7 +511,7 @@ &i2c_3 { status = "okay"; - wm1811: codec@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&i2s0 CLK_I2S_CDCLK>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 186790f39e4d..8b5a79a8720c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -290,7 +290,7 @@ reg = <0x51>; }; - wm8994: wm8994@1a { + wm8994: audio-codec@1a { compatible = "wlf,wm8994"; reg = <0x1a>; @@ -385,7 +385,7 @@ status = "okay"; cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; - w25q80bw@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25x80"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index c952a615148e..6635f6184051 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -217,7 +217,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: mmc3-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ @@ -289,7 +289,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686: max77686@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts index 7cbfc6f1f4b8..0822b778c035 100644 --- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -32,7 +32,7 @@ }; &i2c_7 { - max98090: codec@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupts = <4 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 75fdc5e6d423..9946dce54d74 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -30,7 +30,7 @@ }; &i2c_7 { - max98095: codec@11 { + max98095: audio-codec@11 { compatible = "maxim,max98095"; reg = <0x11>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index a92ade33779c..9d2baea62d0d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -105,7 +105,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - s5m8767-pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index bd2d8835dd36..2ea2caaca4e2 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -70,7 +70,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -635,8 +635,8 @@ #size-cells = <1>; ranges; - usbdrd_dwc3: dwc3@12000000 { - compatible = "synopsys,dwc3"; + usbdrd_dwc3: usb@12000000 { + compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; @@ -844,7 +844,6 @@ clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 75b4150c26d7..949c0721cdb4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -19,6 +19,10 @@ model = "Hardkernel Odroid XU"; compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x7ea00000>; @@ -327,6 +331,8 @@ regulator-name = "vddq_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* Supplies also GPK and GPJ */ + regulator-always-on; }; ldo8_reg: LDO8 { @@ -498,7 +504,7 @@ &i2c_1 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpj3>; @@ -636,12 +642,22 @@ vtmu-supply = <&ldo10_reg>; }; +&usb3_0_oc { + /* External pull up */ + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; +}; + +&usb3_1_oc { + /* External pull up */ + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; +}; + &usbdrd_dwc3_0 { - dr_mode = "host"; + dr_mode = "peripheral"; }; &usbdrd_dwc3_1 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &usbdrd3_0 { @@ -653,3 +669,14 @@ vdd33-supply = <&ldo12_reg>; vdd10-supply = <&ldo15_reg>; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@2 { + compatible = "usb0424,9730"; + reg = <2>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; +}; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index e5d0a2a4f648..d0aa18443a69 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -560,6 +560,34 @@ interrupt-controller; #interrupt-cells = <2>; }; + + usb3_1_oc: usb3-1-oc { + samsung,pins = "gpk2-4", "gpk2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_1_vbusctrl: usb3-1-vbusctrl { + samsung,pins = "gpk2-6", "gpk2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_oc: usb3-0-oc { + samsung,pins = "gpk3-0", "gpk3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_vbusctrl: usb3-0-vbusctrl { + samsung,pins = "gpk3-2", "gpk3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; }; &pinctrl_2 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 60a87684b1af..584ce62361b1 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -390,6 +390,8 @@ &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>; }; &usbdrd_phy0 { @@ -401,6 +403,8 @@ &usbdrd3_1 { clocks = <&clock CLK_USBD301>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>; }; &usbdrd_dwc3_1 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index dd7f8385d81e..bf457d0c02eb 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -39,7 +39,7 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; wakeup { @@ -344,7 +344,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 2bcbdf8a39bf..315b3dc9c017 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -138,7 +138,7 @@ }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>; @@ -205,7 +205,7 @@ status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -615,7 +615,7 @@ status = "okay"; clock-frequency = <400000>; - max98090: codec@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4e49d8095b29..d506da9fa661 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -129,7 +129,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 83580f076a58..e23e8ffb093f 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -42,7 +42,7 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - cluster_a15_opp_table: opp_table0 { + cluster_a15_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -108,7 +108,7 @@ }; }; - cluster_a7_opp_table: opp_table1 { + cluster_a7_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -240,9 +240,6 @@ dmc: memory-controller@10c20000 { compatible = "samsung,exynos5422-dmc"; reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>, <16 1>; - interrupt-names = "drex_0", "drex_1"; clocks = <&clock CLK_FOUT_SPLL>, <&clock CLK_MOUT_SCLK_SPLL>, <&clock CLK_FF_DOUT_SPLL2>, @@ -1080,112 +1077,112 @@ #iommu-cells = <0>; }; - bus_wcore: bus_wcore { + bus_wcore: bus-wcore { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_WCORE>; clock-names = "bus"; status = "disabled"; }; - bus_noc: bus_noc { + bus_noc: bus-noc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK100_NOC>; clock-names = "bus"; status = "disabled"; }; - bus_fsys_apb: bus_fsys_apb { + bus_fsys_apb: bus-fsys-apb { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_PCLK200_FSYS>; clock-names = "bus"; status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS>; clock-names = "bus"; status = "disabled"; }; - bus_fsys2: bus_fsys2 { + bus_fsys2: bus-fsys2 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; clock-names = "bus"; status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333>; clock-names = "bus"; status = "disabled"; }; - bus_gen: bus_gen { + bus_gen: bus-gen { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266>; clock-names = "bus"; status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK66>; clock-names = "bus"; status = "disabled"; }; - bus_g2d: bus_g2d { + bus_g2d: bus-g2d { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333_G2D>; clock-names = "bus"; status = "disabled"; }; - bus_g2d_acp: bus_g2d_acp { + bus_g2d_acp: bus-g2d-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266_G2D>; clock-names = "bus"; status = "disabled"; }; - bus_jpeg: bus_jpeg { + bus_jpeg: bus-jpeg { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_JPEG>; clock-names = "bus"; status = "disabled"; }; - bus_jpeg_apb: bus_jpeg_apb { + bus_jpeg_apb: bus-jpeg-apb { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK166>; clock-names = "bus"; status = "disabled"; }; - bus_disp1_fimd: bus_disp1_fimd { + bus_disp1_fimd: bus-disp1-fimd { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_DISP1>; clock-names = "bus"; status = "disabled"; }; - bus_disp1: bus_disp1 { + bus_disp1: bus-disp1 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_DISP1>; clock-names = "bus"; status = "disabled"; }; - bus_gscl_scaler: bus_gscl_scaler { + bus_gscl_scaler: bus-gscl-scaler { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_GSCL>; clock-names = "bus"; status = "disabled"; }; - bus_mscl: bus_mscl { + bus_mscl: bus-mscl { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_MSCL>; clock-names = "bus"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index b1cf9414ce17..d0df560eb0db 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -35,7 +35,7 @@ }; }; - bus_wcore_opp_table: opp_table2 { + bus_wcore_opp_table: opp-table2 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -61,7 +61,7 @@ }; }; - bus_noc_opp_table: opp_table3 { + bus_noc_opp_table: opp-table3 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -79,7 +79,7 @@ }; }; - bus_fsys_apb_opp_table: opp_table4 { + bus_fsys_apb_opp_table: opp-table4 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -91,7 +91,7 @@ }; }; - bus_fsys2_opp_table: opp_table5 { + bus_fsys2_opp_table: opp-table5 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -106,7 +106,7 @@ }; }; - bus_mfc_opp_table: opp_table6 { + bus_mfc_opp_table: opp-table6 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -127,7 +127,7 @@ }; }; - bus_gen_opp_table: opp_table7 { + bus_gen_opp_table: opp-table7 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -145,7 +145,7 @@ }; }; - bus_peri_opp_table: opp_table8 { + bus_peri_opp_table: opp-table8 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -154,7 +154,7 @@ }; }; - bus_g2d_opp_table: opp_table9 { + bus_g2d_opp_table: opp-table9 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -175,7 +175,7 @@ }; }; - bus_g2d_acp_opp_table: opp_table10 { + bus_g2d_acp_opp_table: opp-table10 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -193,7 +193,7 @@ }; }; - bus_jpeg_opp_table: opp_table11 { + bus_jpeg_opp_table: opp-table11 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -211,7 +211,7 @@ }; }; - bus_jpeg_apb_opp_table: opp_table12 { + bus_jpeg_apb_opp_table: opp-table12 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -229,7 +229,7 @@ }; }; - bus_disp1_fimd_opp_table: opp_table13 { + bus_disp1_fimd_opp_table: opp-table13 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -241,7 +241,7 @@ }; }; - bus_disp1_opp_table: opp_table14 { + bus_disp1_opp_table: opp-table14 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -256,7 +256,7 @@ }; }; - bus_gscl_opp_table: opp_table15 { + bus_gscl_opp_table: opp-table15 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -271,7 +271,7 @@ }; }; - bus_mscl_opp_table: opp_table16 { + bus_mscl_opp_table: opp-table16 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -292,7 +292,7 @@ }; }; - dmc_opp_table: opp_table17 { + dmc_opp_table: opp-table17 { compatible = "operating-points-v2"; opp00 { @@ -503,7 +503,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; samsung,s2mps11-acokb-ground; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index 812659260278..20c222b33f98 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -15,10 +15,10 @@ compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \ "samsung,exynos5"; - pwmleds { + led-controller { compatible = "pwm-leds"; - blueled { + led-1 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index b5ec4f47eb3a..86b96f9706db 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -40,7 +40,7 @@ &hsi2c_5 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx3>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 5da2d81e3be2..e35af40a55cb 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,12 +13,12 @@ #include "exynos5422-odroid-core.dtsi" / { - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&power_key>; - power_key { + power-key { /* * The power button (SW2) is connected to the PWRON * pin (active high) of the S2MPS11 PMIC, which acts diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 98feecad5489..62c5928aa994 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -16,6 +16,10 @@ / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + aliases { + ethernet = ðernet; + }; }; &arm_a7_pmu { @@ -103,3 +107,21 @@ &usbdrd_dwc3_1 { dr_mode = "peripheral"; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index db0bc17a667b..cecaeb69e623 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -15,34 +15,38 @@ / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + aliases { + ethernet = ðernet; + }; }; &i2c_0 { status = "okay"; /* A15 cluster: VDD_ARM */ - ina231@40 { + power-sensor@40 { compatible = "ti,ina231"; reg = <0x40>; shunt-resistor = <10000>; }; /* memory: VDD_MEM */ - ina231@41 { + power-sensor@41 { compatible = "ti,ina231"; reg = <0x41>; shunt-resistor = <10000>; }; /* GPU: VDD_G3D */ - ina231@44 { + power-sensor@44 { compatible = "ti,ina231"; reg = <0x44>; shunt-resistor = <10000>; }; /* A7 cluster: VDD_KFC */ - ina231@45 { + power-sensor@45 { compatible = "ti,ina231"; reg = <0x45>; shunt-resistor = <10000>; @@ -70,3 +74,21 @@ &usbdrd_dwc3_1 { dr_mode = "peripheral"; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index ddd55d3bcadd..ede782257643 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -17,10 +17,10 @@ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ "samsung,exynos5"; - pwmleds { + led-controller { compatible = "pwm-leds"; - blueled { + led-1 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi index 56acd832f0b3..2fc3e86dc5f7 100644 --- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -11,10 +11,10 @@ #include <dt-bindings/gpio/gpio.h> / { - pwmleds { + led-controller-1 { compatible = "pwm-leds"; - greenled { + led-1 { label = "green:mmc0"; pwms = <&pwm 1 2000000 0>; pwm-names = "pwm1"; @@ -26,7 +26,7 @@ linux,default-trigger = "mmc0"; }; - blueled { + led-2 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; @@ -35,9 +35,10 @@ }; }; - gpioleds { + led-controller-2 { compatible = "gpio-leds"; - redled { + + led-3 { label = "red:microSD"; gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 8aa5117e58ce..fe9d34c23374 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -101,7 +101,6 @@ reg = <0x12d10000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; @@ -148,7 +147,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_0: dwc3@12000000 { + usbdrd_dwc3_0: usb@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -170,7 +169,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_1: dwc3@12400000 { + usbdrd_dwc3_1: usb@12400000 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 60ab0effe474..0ce3443d39a8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -138,7 +138,7 @@ }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>; @@ -214,7 +214,7 @@ status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts index 64f8ed126931..f473fa22e9ce 100644 --- a/arch/arm/boot/dts/hi3519-demb.dts +++ b/arch/arm/boot/dts/hi3519-demb.dts @@ -14,7 +14,7 @@ serial0 = &uart0; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi index 410409a0ed66..c524c854d319 100644 --- a/arch/arm/boot/dts/hi3519.dtsi +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -52,8 +52,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12100000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -61,8 +61,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12101000 0x1000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART1_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -70,8 +70,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12102000 0x1000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -79,8 +79,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12103000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART3_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -88,8 +88,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12104000 0x1000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART4_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -127,8 +127,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12120000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -139,8 +139,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12121000 0x1000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI1_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -151,8 +151,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12122000 0x1000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index 8c703c3f2fe0..ce356c469e1e 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -17,46 +17,46 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - amba { + amba-bus { dual_timer0: dual_timer@800000 { status = "ok"; }; - uart0: uart@b00000 { /* console */ - pinctrl-names = "default", "idle"; + uart0: serial@b00000 { /* console */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; status = "ok"; }; - uart1: uart@b01000 { /* modem */ - pinctrl-names = "default", "idle"; + uart1: serial@b01000 { /* modem */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; status = "ok"; }; - uart2: uart@b02000 { /* audience */ - pinctrl-names = "default", "idle"; + uart2: serial@b02000 { /* audience */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; status = "ok"; }; - uart3: uart@b03000 { - pinctrl-names = "default", "idle"; + uart3: serial@b03000 { + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; status = "ok"; }; - uart4: uart@b04000 { - pinctrl-names = "default", "idle"; + uart4: serial@b04000 { + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; status = "ok"; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f683440ee569..905900bf3e82 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -63,7 +63,7 @@ }; }; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; @@ -172,48 +172,48 @@ interrupts = <1 13 0xf01>; }; - uart0: uart@b00000 { + uart0: serial@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; interrupts = <0 20 4>; - clocks = <&clock HI3620_UARTCLK0>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart1: uart@b01000 { + uart1: serial@b01000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb01000 0x1000>; interrupts = <0 21 4>; - clocks = <&clock HI3620_UARTCLK1>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart2: uart@b02000 { + uart2: serial@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb02000 0x1000>; interrupts = <0 22 4>; - clocks = <&clock HI3620_UARTCLK2>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart3: uart@b03000 { + uart3: serial@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb03000 0x1000>; interrupts = <0 23 4>; - clocks = <&clock HI3620_UARTCLK3>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart4: uart@b04000 { + uart4: serial@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 24 4>; - clocks = <&clock HI3620_UARTCLK4>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts index f05e74eacfe0..031476304d94 100644 --- a/arch/arm/boot/dts/hip01-ca9x2.dts +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -37,7 +37,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 975d39828405..2a7963605390 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -35,47 +35,47 @@ interrupt-parent = <&gic>; ranges = <0 0x10000000 0x20000000>; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges; - uart0: uart@10001000 { + uart0: serial@10001000 { compatible = "snps,dw-apb-uart"; reg = <0x10001000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 32 4>; status = "disabled"; }; - uart1: uart@10002000 { + uart1: serial@10002000 { compatible = "snps,dw-apb-uart"; reg = <0x10002000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 33 4>; status = "disabled"; }; - uart2: uart@10003000 { + uart2: serial@10003000 { compatible = "snps,dw-apb-uart"; reg = <0x10003000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 34 4>; status = "disabled"; }; - uart3: uart@10006000 { + uart3: serial@10006000 { compatible = "snps,dw-apb-uart"; reg = <0x10006000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 4 4>; status = "disabled"; diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index 9019e0d2ef60..f5691dbc26d2 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -22,7 +22,7 @@ }; soc { - uart0: uart@4007000 { + uart0: serial@4007000 { status = "ok"; }; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 555bc6b6720f..bccf5ba3d855 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -250,12 +250,12 @@ <0 79 4>; }; - uart0: uart@4007000 { + uart0: serial@4007000 { compatible = "snps,dw-apb-uart"; reg = <0x4007000 0x1000>; interrupts = <0 381 4>; - clocks = <&clk_168m>; - clock-names = "uartclk"; + clocks = <&clk_168m>, <&clk_168m>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index d55e9cd3b12b..22b122d3f514 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -35,7 +35,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index e2dbf1d8a67b..97211385dc89 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -30,7 +30,7 @@ interrupt-parent = <&gic>; ranges = <0 0xf8000000 0x8000000>; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -86,48 +86,48 @@ status = "disabled"; }; - uart0: uart@b00000 { + uart0: serial@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b00000 0x1000>; interrupts = <0 49 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart1: uart@6000 { + uart1: serial@6000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00006000 0x1000>; interrupts = <0 50 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart2: uart@b02000 { + uart2: serial@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b02000 0x1000>; interrupts = <0 51 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart3: uart@b03000 { + uart3: serial@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b03000 0x1000>; interrupts = <0 52 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart4: uart@b04000 { + uart4: serial@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 53 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -423,7 +423,7 @@ interrupts = <0 35 4>; clocks = <&clock HIX5HD2_MMC_CIU_RST>, <&clock HIX5HD2_MMC_BIU_CLK>; - clock-names = "ciu", "biu"; + clock-names = "biu", "ciu"; }; sd: mmc@1820000 { @@ -432,7 +432,7 @@ interrupts = <0 34 4>; clocks = <&clock HIX5HD2_SD_CIU_RST>, <&clock HIX5HD2_SD_BIU_CLK>; - clock-names = "ciu","biu"; + clock-names = "biu", "ciu"; }; gmac0: ethernet@1840000 { @@ -453,14 +453,14 @@ status = "disabled"; }; - usb0: ehci@1890000 { + usb0: usb@1890000 { compatible = "generic-ehci"; reg = <0x1890000 0x1000>; interrupts = <0 66 4>; clocks = <&clock HIX5HD2_USB_CLK>; }; - usb1: ohci@1880000 { + usb1: usb@1880000 { compatible = "generic-ohci"; reg = <0x1880000 0x1000>; interrupts = <0 67 4>; @@ -468,7 +468,7 @@ }; peripheral_ctrl: syscon@a20000 { - compatible = "syscon"; + compatible = "hisilicon,peri-subctrl", "syscon"; reg = <0xa20000 0x1000>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 1ab19f1268f8..fdcca82c9986 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -525,7 +525,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; }; - wdog@53fdc000 { + watchdog@53fdc000 { compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 126>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 7bc132737a37..fd525c3b16fa 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -99,7 +99,7 @@ #dma-channels = <16>; }; - wdog: wdog@10002000 { + wdog: watchdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 94dfbf5b3f34..bbe52150b165 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1317,7 +1317,7 @@ status = "disabled"; }; - etn_switch: switch@800f8000 { + eth_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 45333f7e10ea..948d2a543f8d 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -315,10 +315,11 @@ clock-names = "ref", "ipg"; }; - wdog: wdog@53fdc000 { + wdog: watchdog@53fdc000 { compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 41>; + interrupts = <55>; }; pwm: pwm@53fe0000 { diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index aba16252faab..98ccc81ca6d9 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -294,7 +294,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin"; }; - wdog: wdog@53fdc000 { + wdog: watchdog@53fdc000 { compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 74>; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index a0eaf869b913..97cfd970fe74 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx50.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kobo Aura (N514)"; @@ -119,7 +120,14 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - /* TODO: ektf2132 touch controller at 0x15 */ + touchscreen@15 { + reg = <0x15>; + compatible = "elan,ektf2132"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>; + }; }; &i2c2 { @@ -139,7 +147,7 @@ }; &iomuxc { - pinctrl_gpiokeys: gpiokeys { + pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < MX50_PAD_CSPI_MISO__GPIO4_10 0x0 MX50_PAD_SD2_D7__GPIO5_15 0x0 @@ -147,34 +155,34 @@ >; }; - pinctrl_i2c1: i2c1 { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX50_PAD_I2C1_SCL__I2C1_SCL 0x400001fd MX50_PAD_I2C1_SDA__I2C1_SDA 0x400001fd >; }; - pinctrl_i2c2: i2c2 { + pinctrl_i2c2: i2c2grp { fsl,pins = < MX50_PAD_I2C2_SCL__I2C2_SCL 0x400001fd MX50_PAD_I2C2_SDA__I2C2_SDA 0x400001fd >; }; - pinctrl_i2c3: i2c3 { + pinctrl_i2c3: i2c3grp { fsl,pins = < MX50_PAD_I2C3_SCL__I2C3_SCL 0x400001fd MX50_PAD_I2C3_SDA__I2C3_SDA 0x400001fd >; }; - pinctrl_leds: leds { + pinctrl_leds: ledsgrp { fsl,pins = < MX50_PAD_PWM1__GPIO6_24 0x0 >; }; - pinctrl_sd1: sd1 { + pinctrl_sd1: sd1grp { fsl,pins = < MX50_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 MX50_PAD_SD1_CLK__ESDHC1_CLK 0xd4 @@ -187,7 +195,7 @@ >; }; - pinctrl_sd2: sd2 { + pinctrl_sd2: sd2grp { fsl,pins = < MX50_PAD_SD2_CMD__ESDHC2_CMD 0x1e4 MX50_PAD_SD2_CLK__ESDHC2_CLK 0xd4 @@ -198,19 +206,19 @@ >; }; - pinctrl_sd2_reset: sd2-reset { + pinctrl_sd2_reset: sd2-resetgrp { fsl,pins = < MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0 >; }; - pinctrl_sd2_vmmc: sd2-vmmc { + pinctrl_sd2_vmmc: sd2-vmmcgrp { fsl,pins = < MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0 >; }; - pinctrl_sd3: sd3 { + pinctrl_sd3: sd3grp { fsl,pins = < MX50_PAD_SD3_CMD__ESDHC3_CMD 0x1e4 MX50_PAD_SD3_CLK__ESDHC3_CLK 0xd4 @@ -225,14 +233,21 @@ >; }; - pinctrl_uart2: uart2 { + pinctrl_ts: tsgrp { + fsl,pins = < + MX50_PAD_CSPI_MOSI__GPIO4_9 0x0 + MX50_PAD_SD2_D5__GPIO5_13 0x0 + >; + }; + + pinctrl_uart2: uart2grp { fsl,pins = < MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4 MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x1e4 >; }; - pinctrl_usbphy: usbphy { + pinctrl_usbphy: usbphygrp { fsl,pins = < MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0 >; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index b6b2e6af9b96..a969f335b240 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -267,7 +267,7 @@ <&iomuxc 20 140 11>; }; - wdog1: wdog@53f98000 { + wdog1: watchdog@53f98000 { compatible = "fsl,imx50-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index e559ab0c3645..ec8ca3ac2c1c 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -451,7 +451,7 @@ "", "", "", "", "", "", "", ""; - unused-sd3-wp-gpio { + unused-sd3-wp-hog { /* * See pinctrl_esdhc1 below for more details on this */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 985e1be03ad6..7ebb46ce9e36 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -370,14 +370,14 @@ status = "disabled"; }; - wdog1: wdog@73f98000 { + wdog1: watchdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; clocks = <&clks IMX5_CLK_DUMMY>; }; - wdog2: wdog@73f9c000 { + wdog2: watchdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 8f4a63ea912e..be040b6a02fa 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -176,36 +176,37 @@ power-supply = <®_3v3_lcd>; }; - leds-brightness { + led-controller-1 { compatible = "pwm-leds"; - alarm-brightness { + led-1 { + label = "alarm-brightness"; pwms = <&pwm1 0 100000>; max-brightness = <255>; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_alarmled_pins>; - alarm1 { + led-2 { label = "alarm:red"; gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; }; - alarm2 { + led-3 { label = "alarm:yellow"; gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; }; - alarm3 { + led-4 { label = "alarm:blue"; gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; }; - alarm4 { + led-5 { label = "alarm:silenced"; gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 500eeaa3a27c..000050aeeabe 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -427,14 +427,14 @@ status = "disabled"; }; - wdog1: wdog@53f98000 { + wdog1: watchdog@53f98000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; clocks = <&clks IMX5_CLK_DUMMY>; }; - wdog2: wdog@53f9c000 { + wdog2: watchdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts new file mode 100644 index 000000000000..4329b372d8cb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -0,0 +1,564 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Altesco I6P Board"; + compatible = "alt,alti6p", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + i2c2-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c2>; + mux-controls = <&i2c_mux>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c4-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c4>; + mux-controls = <&i2c_mux>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-debug1 { + function = LED_FUNCTION_SD; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + i2c_mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2cmux>; + + mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>, + <&gpio5 11 GPIO_ACTIVE_HIGH>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clock_ksz8081>; + clock-names = "ipg", "ahb", "ptp"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "USB_H1_OC", "", "", "", "", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "I2C_EN13", "I2C_EN24", "", "", "", "", + "", "", "", "", "", "AUDIO_RESET", "", "", + "", "", "", "", "", "", "", ""; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +/* DDC */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c2 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* external interface, device are configured from user space */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&i2c4 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + /* NOTE: DDC is done via I2C2, so DON'T configure DDC + * pins for HDMI! + */ + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x4001f8b1 + MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2cmux: i2cmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1B058 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1B058 + + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index b16603f27dce..dfa6f64d43cc 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -46,7 +46,7 @@ / { model = "aristainetos2 i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index abb2a1b9ce08..5e15212eaf3a 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -46,7 +46,7 @@ / { model = "aristainetos2 i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 5c7e85300695..cc861a43eb58 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -10,7 +10,7 @@ / { model = "aristainetos i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl"; backlight { compatible = "pwm-backlight"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 4d58cb4436d9..b6cb78870cd5 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -10,7 +10,7 @@ / { model = "aristainetos i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts new file mode 100644 index 000000000000..6b6e6fcdea9c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -0,0 +1,470 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2019 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Van der Laan LANMCU"; + compatible = "vdl,lanmcu", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 1000>; + num-interpolated-steps = <20>; + default-brightness-level = <19>; + }; + + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel { + compatible = "edt,etm0700g0bdh6"; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; + +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clock_ksz8081>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "BL_PWM", "", "", "", "", "", "", + "", "", "", "", "", "", "", "ENET_LED_GREEN", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "", + "", "", "", "", "UART2_CTS", "", "UART3_CTS", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "ENET_RST", "ENET_INT", + "", "", "I2C1_SDA", "I2C1_SCL", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "WLAN_REG_ON", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "EMMC_RST", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts_edt>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; + + touchscreen-fuzz-x = <0>; + touchscreen-fuzz-y = <0>; + + /* Touch screen calibration */ + threshold = <50>; + gain = <5>; + offset = <10>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_ts_edt: ts1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x130b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x130b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifigrp { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts index 659a8e8714ea..d85b15a8c127 100644 --- a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-dwarf", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts index d7403c5c4337..08fedcbcc91b 100644 --- a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-hobbit", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts index b282dbf953aa..32ccfc5d41ce 100644 --- a/arch/arm/boot/dts/imx6dl-pico-nymph.dts +++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-nymph", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts index b7b1c07f96f3..4590e8ad9a91 100644 --- a/arch/arm/boot/dts/imx6dl-pico-pi.dts +++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-pi", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts index 81cc346dd149..02aca1e28ce3 100644 --- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts @@ -12,6 +12,17 @@ / { model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &ldb { @@ -22,18 +33,11 @@ fsl,data-width = <24>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <10>; - vfront-porch = <3>; - hsync-len = <80>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts index 618d2743e1e9..479a63ed42af 100644 --- a/arch/arm/boot/dts/imx6q-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-dwarf", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts index 7a666507b456..b767131068f5 100644 --- a/arch/arm/boot/dts/imx6q-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-hobbit", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts index fe5a7becc9e5..e8ad4c12b263 100644 --- a/arch/arm/boot/dts/imx6q-pico-nymph.dts +++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-nymph", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts index 9413f0a68f54..cc2394ddad6c 100644 --- a/arch/arm/boot/dts/imx6q-pico-pi.dts +++ b/arch/arm/boot/dts/imx6q-pico-pi.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and PI baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-pi", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 67042793b0ca..1e530d892b76 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,12 +55,12 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_pwm1>; - front { + led-1 { active-low; label = "imx6:red:front"; max-brightness = <248>; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 24f793ca2886..d6df598bd1c2 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -390,21 +390,21 @@ /* I2C_GP */ &i2c1 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; }; /* HDMI_CTRL */ &i2c2 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; }; /* I2C_PM */ &i2c3 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e361df26a168..7a1e53195785 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -116,7 +116,8 @@ status = "okay"; som_eeprom: eeprom@50 { - compatible = "atmel,24c32"; + compatible = "catalyst,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 41ebe4599e43..a80aa08a37cb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -84,7 +84,8 @@ status = "okay"; eeprom@50 { - compatible = "atmel,24c32"; + compatible = "st,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 66b15748e287..c0a76202e16b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -330,28 +330,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - usb-emulation { + usb-emulation-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-low; line-name = "usb-emulation"; }; - usb-mode1 { + usb-mode1-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-mode1"; }; - usb-pwr { + usb-pwr-hog { gpio-hog; gpios = <22 GPIO_ACTIVE_LOW>; output-high; line-name = "usb-pwr-ctrl-en-n"; }; - usb-mode2 { + usb-mode2-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7a8837cbe21b..6f59a99cbe82 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -45,6 +45,10 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg; + usb1 = &usbh1; + usb2 = &usbh2; + usb3 = &usbh3; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -542,25 +546,25 @@ status = "disabled"; }; - can1: flexcan@2090000 { + can1: can@2090000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 28 0x10 17>; + fsl,stop-mode = <&gpr 0x34 28>; status = "disabled"; }; - can2: flexcan@2094000 { + can2: can@2094000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 29 0x10 18>; + fsl,stop-mode = <&gpr 0x34 29>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts new file mode 100644 index 000000000000..c42723989bc0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2018 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx6qp.dtsi" + +/ { + model = "Protonic WD3 board"; + compatible = "prt,prtwd3", "fsl,imx6qp"; + + chosen { + stdout-path = &uart4; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_mcp251xfd: clock-mcp251xfd { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio>; + + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH>; + + /* Microchip KSZ8081 */ + usbeth_phy: ethernet-phy@3 { + reg = <0x3>; + + interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <500>; + reset-deassert-us = <1000>; + clocks = <&clock_ksz8081>; + clock-names = "rmii-ref"; + micrel,led-mode = <0>; + }; + + tja1102_phy0: ethernet-phy@4 { + reg = <0x4>; + + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <2000>; + #address-cells = <1>; + #size-cells = <0>; + + tja1102_phy1: ethernet-phy@5 { + reg = <0x5>; + + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "usb"; + phy-handle = <&usbeth_phy>; + phy-mode = "rmii"; + }; + + port@1 { + reg = <1>; + label = "t1slave"; + phy-handle = <&tja1102_phy1>; + phy-mode = "rmii"; + }; + + port@2 { + reg = <2>; + label = "t1master"; + phy-handle = <&tja1102_phy0>; + phy-mode = "rmii"; + + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp251xfd"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + reg = <0>; + clocks = <&clock_mcp251xfd>; + spi-max-frequency = <10000000>; + interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + status = "okay"; + + phy-mode = "rgmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031 */ + rgmii_phy: ethernet-phy@2 { + reg = <2>; + + interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "PHY3_RESET", "", "", "PHY3_INT", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "", + "", "", "ECSPI2_SS0", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "", "", + "", "", "", "", "", "", "", "", + "ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "SW_RESET", "", "", + "PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET", + "PHY0_INT", "", "", "", + "", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD", + "", "", + "", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ", + "DISP0_EN", "CAM_GPIO0"; +}; + +&gpio6 { + gpio-line-names = + "LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD", + "CAM_LOCK", "", "POWER_TG", + "POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "", + "USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1", + "USB_ETH_CHG_ID2", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* VIN */ + channel@4 { + reg = <4>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* VBUS */ + channel@5 { + reg = <5>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* ICHG */ + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <1>; + ti,datarate = <3>; + }; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + /* CAN2_nINT */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + + /* Configure clock provider for RGMII ref clock */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + /* Configure clock consumer for RGMII ref clock */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + + /* SJA1105Q switch reset */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x10030 + + /* phy3/rgmii_phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x10030 + /* phy3/rgmii_phy int */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x40010000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_mdio: mdiogrp { + fsl,pins = < + /* phy0/usbeth_phy reset */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x10030 + /* phy0/usbeth_phy int */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + + /* phy12/tja1102_phy0 reset */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x10030 + /* phy12/tja1102_phy0 int */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x100b1 + /* phy12/tja1102_phy0 enable. Set 100K pull-up */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1f030 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 408da704c459..9d7c8884892a 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -51,8 +51,8 @@ #include "imx6sl.dtsi" / { - model = "WaRP Board"; - compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + model = "Revotics WaRP Board"; + compatible = "revotics,imx6sl-warp", "fsl,imx6sl"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 91a8c54d5e11..997b96c1c47b 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -39,6 +39,9 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 0b622201a1f3..04f8d637a501 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -36,6 +36,8 @@ spi1 = &ecspi2; spi3 = &ecspi3; spi4 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 5547916870c7..b9a1401e6c6d 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -40,22 +40,22 @@ regulator-max-microvolt = <3300000>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - red { + led-1 { label = "red"; max-brightness = <255>; pwms = <&pwm6 0 50000>; }; - green { + led-2 { label = "green"; max-brightness = <255>; pwms = <&pwm2 0 50000>; }; - blue { + led-3 { label = "blue"; max-brightness = <255>; pwms = <&pwm1 0 50000>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index dfdca1804f9f..8516730778df 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -49,6 +49,9 @@ spi2 = &ecspi3; spi3 = &ecspi4; spi4 = &ecspi5; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -463,7 +466,7 @@ clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -474,7 +477,7 @@ clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index a0bbec57ddc7..3ec042bfccba 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -110,7 +110,7 @@ }; &gpio5 { - emmc-usd-mux { + emmc-usd-mux-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; output-high; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 88f631c8fabb..19a062635ff6 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -75,6 +75,7 @@ eeprom@52 { compatible = "catalyst,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x52>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts new file mode 100644 index 000000000000..cfc744f8fcad --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <y.bas@phytec.de> + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-phytec-phycore-som.dtsi" +#include "imx6ul-phytec-segin.dtsi" +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" +#include "imx6ul-phytec-segin-peb-av-02.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC"; + compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10", + "phytec,imx6ul-pcl063","fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts index 699dfcbf9a60..bff98e676980 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -9,6 +9,7 @@ #include "imx6ul-phytec-phycore-som.dtsi" #include "imx6ul-phytec-segin.dtsi" #include "imx6ul-phytec-segin-peb-eval-01.dtsi" +#include "imx6ul-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi new file mode 100644 index 000000000000..7cda6944501d --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2016, 2020 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/ { + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + power-supply = <®_backlight_en>; + pwms = <&pwm3 0 5000000>; + status = "disabled"; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&backlight_lcd>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_parallel_out>; + }; + }; + }; + + reg_backlight_en: regulator-backlight-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_en>; + regulator-name = "backlight-lcd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&i2c1 { + edt_ft5406: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5406>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + wakeup-source; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat>; + status = "disabled"; + + port { + lcdif_parallel_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_edt_ft5406: edtft5406grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_backlight_en: bachlightengrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59 + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index f1513e676c2f..95e4080dd0a6 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -130,31 +130,6 @@ status = "disabled"; }; - stmpe: touchscreen@44 { - compatible = "st,stmpe811"; - reg = <0x44>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_stmpe>; - status = "disabled"; - - touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <1>; - touchscreen-inverted-x = <1>; - touchscreen-inverted-y = <1>; - }; - }; - i2c_rtc: rtc@68 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc_int>; @@ -176,12 +151,6 @@ }; }; -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "disabled"; -}; - &sai2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; @@ -267,12 +236,6 @@ >; }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 - >; - }; - pinctrl_rtc_int: rtcintgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 @@ -289,12 +252,6 @@ >; }; - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 - >; - }; - pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d7d9f3e46b92..9d3411cc597b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -423,25 +425,25 @@ status = "disabled"; }; - can1: flexcan@2090000 { + can1: can@2090000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; - can2: flexcan@2094000 { + can2: can@2094000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts index 9648d4ecaf58..8e2a4c5d7765 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts @@ -9,6 +9,7 @@ #include "imx6ull-phytec-phycore-som.dtsi" #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" +#include "imx6ull-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts index 656baf846453..c8d3eff9ed4b 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts @@ -9,6 +9,7 @@ #include "imx6ull-phytec-phycore-som.dtsi" #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" +#include "imx6ull-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi new file mode 100644 index 000000000000..06bb7f327780 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin-peb-av-02.dtsi" + +&iomuxc { + /delete-node/ edtft5406grp; + /delete-node/ stmpegrp; +}; + +&iomuxc_snvs { + pinctrl_edt_ft5406: edtft5406grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi index c1595fc785f7..e287a0453b5f 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi @@ -14,7 +14,6 @@ &iomuxc { /delete-node/ flexcan1engrp; /delete-node/ rtcintgrp; - /delete-node/ stmpegrp; }; &iomuxc_snvs { @@ -29,10 +28,4 @@ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 >; }; - - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 - >; - }; }; diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index 50abf18ad30b..c6d1c63f7905 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -14,6 +14,12 @@ #include <dt-bindings/net/ti-dp83867.h> / { + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc1; + /delete-property/ mmc2; + }; + beeper { compatible = "gpio-beeper"; gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; @@ -164,6 +170,20 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; }; &adc1 { @@ -179,7 +199,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - num-chipselects = <3>; cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, <&gpio4 2 GPIO_ACTIVE_LOW>; status = "okay"; @@ -188,7 +207,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; status = "okay"; }; @@ -214,10 +232,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: Error */ - ti,led-function = <0x0db0>; - /* Active low, LED1 and LED2 driven by phy */ - ti,led-ctrl = <0x1001>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; }; }; }; @@ -362,13 +377,25 @@ >; }; - pinctrl_pca9555: pca95550grp { fsl,pins = < MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11 + MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c + MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c + MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c + + MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c + MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14 + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e @@ -472,6 +499,12 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 >; }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 + >; + }; }; &pwm1 { @@ -480,6 +513,16 @@ status = "okay"; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -518,6 +561,9 @@ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; status = "okay"; }; @@ -532,7 +578,8 @@ srp-disable; hnp-disable; adp-disable; - dr_mode = "host"; + over-current-active-low; + dr_mode = "otg"; status = "okay"; }; @@ -548,3 +595,9 @@ no-1-8-v; status = "okay"; }; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts new file mode 100644 index 000000000000..a6d68165fb1e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator in + * manufacturing/debugging mode. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-flex-concentrator.dts" + +/ { + model = "Kamstrup OMNIA Flex Concentrator - Manufacturing"; + compatible = "kam,imx7d-flex-concentrator-mfg", "fsl,imx7d"; + + chosen { + stdout-path = &uart4; + }; +}; + +&uart4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts new file mode 100644 index 000000000000..84b095279e65 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" + +/* One I2C device on TQMa7 SoM is not mounted */ +/delete-node/ &ds1339; + +/ { + model = "Kamstrup OMNIA Flex Concentrator"; + compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d"; + + memory@80000000 { + device_type = "memory"; + /* 1024 MB - TQMa7D board configuration */ + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + /* + * Human Machine Interface consists of 4 dual red/green LEDs. + * hmi-a:green is controlled directly by the switch-mode power supply. + * hmi-a:red is not used. + */ + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "hmi-b:red:heartbeat-degraded"; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "hmi-b:green:heartbeat-running"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "hmi-c:red:mesh-error"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "hmi-c:green:mesh-activity"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "hmi-d:red:omnia-error"; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "hmi-d:green:omnia-activity"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * Errata e10574 board restart workaround. + */ + gpio-restart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restart>; + compatible = "gpio-restart"; + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* + * Analog signals + * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806) + */ +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + status = "okay"; + + pcf2127: rtc@0 { + compatible = "nxp,pcf2127"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-chipselects = <1>; + cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* + * ST chip maximum SPI clock frequency is 33 MHz. + * + * TCG specification - Section 6.4.1 Clocking: + * TPM shall support a SPI clock frequency range of 10-24 MHz. + */ + st33htph: tpm-tis@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + /* + * MDIO bus reset is used to generate PHY device reset before + * Ethernet PHY type ID auto-detection. Otherwise this communication + * fails as device does not answer when recommended reset circuit + * is used. + */ + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-delay-us = <100000>; + reset-post-delay-us = <500000>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + + /* Microchip/Micrel KSZ8081RNB */ + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + }; + }; +}; + +/* + * Detection signals for internal USB modules. + * Used for robust USB plug and play handling such as USB downstream port + * power-cycle and USB hub reset in case of misbehaving or crashed modules. + * + * SMPS - AC input monitor based on zero crossing. + * Used for last gasp notification. + */ +&gpio3 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "", + "", "", "", "", "", "", "", "", + "", "module-b-detection", "", "module-a-detection", "", "", "", ""; +}; + +/* + * Tamper IRQ trigger timestamp reading. + * Used for sealed cover opened/closed notification. + */ +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rtc-tamper-irq", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_misc>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */ + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */ + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */ + /* RTC - Tamper IRQ */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */ + MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */ + MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */ + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */ + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */ + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */ + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */ + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */ + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */ + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */ + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */ + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */ + /* PHY reset: SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */ + /* Clock from PHY to MAC: 100kPU */ + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */ + /* PHY interrupt: 100kPU, HYS */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */ + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */ + >; + }; + + pinctrl_misc: miscgrp { + fsl,pins = < + /* Module A detection (low = present) */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */ + /* Module B detection (low = present) */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */ + /* SMPS - AC input monitor (high = failure) */ + MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */ + /* USB - Hub reset */ + MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */ + >; + }; + + pinctrl_restart: restartgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */ + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */ + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */ + >; + }; + +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + dr_mode = "host"; + status = "okay"; +}; + +/* + * External watchdog feature provided by pcf2127. + */ +&wdog1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 221274c73dbd..5ef86de53013 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -14,7 +14,7 @@ / { model = "TQ Systems TQMa7D board on MBa7 carrier board"; - compatible = "tq,imx7d-mba7", "fsl,imx7d"; + compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d"; }; &fec2 { @@ -39,10 +39,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: error */ - ti,led-function = <0x0db0>; - /* active low, LED1/2 driven by phy */ - ti,led-ctrl = <0x1001>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index cff875b80b60..b0bcfa9094a3 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -7,6 +7,12 @@ #include <dt-bindings/reset/imx7-reset.h> / { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + cpus { cpu0: cpu@0 { clock-frequency = <996000000>; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts index a143d566a38b..d7d3f530f843 100644 --- a/arch/arm/boot/dts/imx7s-mba7.dts +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -14,5 +14,5 @@ / { model = "TQ Systems TQMa7S board on MBa7 carrier board"; - compatible = "tq,imx7s-mba7", "fsl,imx7s"; + compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s"; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index d6b4888fa686..569bbd84e371 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -10,8 +10,8 @@ #include "imx7s.dtsi" / { - model = "Warp i.MX7 Board"; - compatible = "warp,imx7s-warp", "fsl,imx7s"; + model = "Element14 Warp i.MX7 Board"; + compatible = "element14,imx7s-warp", "fsl,imx7s"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 84d9cc13afb9..251007a7b836 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; }; cpus { @@ -971,7 +973,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -982,7 +984,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 8b3d64c913d8..14e26a4fd62a 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -46,6 +46,14 @@ regulator-always-on; }; + vcc1v8_ldo2_reg: fixedregulator-vcc1v8-ldo2 { + compatible = "regulator-fixed"; + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + hdmi: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -58,6 +66,57 @@ }; }; }; + + aud_mclk: aud_mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "K2G-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + bitclock-master = <&sound0_0_master>; + frame-master = <&sound0_0_master>; + sound0_0_master: cpu { + sound-dai = <&mcasp2>; + clocks = <&k2g_clks 0x6 1>; + system-clock-direction-out; + }; + + codec { + sound-dai = <&tlv320aic3106>; + clocks = <&aud_mclk>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + bitclock-master = <&sound0_1_master>; + frame-master = <&sound0_1_master>; + sound0_1_master: cpu { + sound-dai = <&mcasp2>; + clocks = <&k2g_clks 0x6 1>; + system-clock-direction-out; + }; + + codec { + sound-dai = <&sii9022>; + clocks = <&aud_mclk>; + }; + }; + }; }; &k2g_pinctrl { @@ -214,6 +273,15 @@ K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */ >; }; + + mcasp2_pins: pinmux_mcasp2_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */ + K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */ + K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo10.mcasp2_afsx */ + K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo12.mcasp2_aclkx */ + >; + }; }; &uart0 { @@ -423,6 +491,10 @@ compatible = "sil,sii9022"; reg = <0x3b>; + sil,i2s-data-lanes = < 0 >; + clocks = <&aud_mclk>; + clock-names = "mclk"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -444,6 +516,19 @@ }; }; }; + + tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vcc3v3_dcin_reg>; + IOVDD-supply = <&vcc3v3_dcin_reg>; + DRVDD-supply = <&vcc3v3_dcin_reg>; + DVDD-supply = <&vcc1v8_ldo2_reg>; + }; }; &dss { @@ -458,3 +543,30 @@ }; }; }; + +&k2g_clks { + /* on the board 22.5792MHz is connected to AUDOSC_IN */ + assigned-clocks = <&k2g_clks 0x4c 2>; + assigned-clock-rates = <22579200>; +}; + +&mcasp2 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcasp2_pins>; + + assigned-clocks = <&k2g_clks 0x6 1>; + assigned-clock-parents = <&k2g_clks 0x6 2>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 6 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 0 0 // AXR2: TX, AXR3: rx + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 6a3f1bf6d9f1..264938dfa4d9 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -34,7 +34,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 7f326e267494..328516351e84 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -34,7 +34,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; spi@10600 { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 02d87e0a1061..d4cb3cd3e2a2 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -66,7 +66,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index ff1260ee3fe8..dfb41393941d 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -38,7 +38,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 4a512d80912c..95af7aa1fdcb 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -72,7 +72,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 62272d58664f..2338f495d517 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -112,7 +112,7 @@ }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 2c4037b07282..8f73197f251a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -45,7 +45,7 @@ }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 6c8d94beae78..fca31a5d5ac7 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -369,7 +369,7 @@ clocks = <&gate_clk 14>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; sata_phy1: sata-phy@84000 { @@ -378,7 +378,7 @@ clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@a0000 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 827373ef1a54..007dd2bd0595 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -173,7 +173,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1021a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -288,46 +288,43 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; - fsl,tmu-calibration = <0x00000000 0x0000000f - 0x00000001 0x00000017 - 0x00000002 0x0000001e - 0x00000003 0x00000026 - 0x00000004 0x0000002e - 0x00000005 0x00000035 - 0x00000006 0x0000003d - 0x00000007 0x00000044 - 0x00000008 0x0000004c - 0x00000009 0x00000053 - 0x0000000a 0x0000005b - 0x0000000b 0x00000064 - - 0x00010000 0x00000011 - 0x00010001 0x0000001c - 0x00010002 0x00000024 - 0x00010003 0x0000002b - 0x00010004 0x00000034 - 0x00010005 0x00000039 - 0x00010006 0x00000042 - 0x00010007 0x0000004c - 0x00010008 0x00000051 - 0x00010009 0x0000005a - 0x0001000a 0x00000063 - - 0x00020000 0x00000013 - 0x00020001 0x00000019 - 0x00020002 0x00000024 - 0x00020003 0x0000002c - 0x00020004 0x00000035 - 0x00020005 0x0000003d - 0x00020006 0x00000046 - 0x00020007 0x00000050 - 0x00020008 0x00000059 - - 0x00030000 0x00000002 - 0x00030001 0x0000000d - 0x00030002 0x00000019 - 0x00030003 0x00000024>; + fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; + fsl,tmu-calibration = <0x00000000 0x00000020 + 0x00000001 0x00000024 + 0x00000002 0x0000002a + 0x00000003 0x00000032 + 0x00000004 0x00000038 + 0x00000005 0x0000003e + 0x00000006 0x00000043 + 0x00000007 0x0000004a + 0x00000008 0x00000050 + 0x00000009 0x00000059 + 0x0000000a 0x0000005f + 0x0000000b 0x00000066 + + 0x00010000 0x00000023 + 0x00010001 0x0000002b + 0x00010002 0x00000033 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000054 + 0x00010007 0x0000005c + 0x00010008 0x00000065 + 0x00010009 0x0000006f + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000048 + 0x00020004 0x00000054 + 0x00020005 0x00000060 + 0x00020006 0x0000006c + + 0x00030000 0x00000025 + 0x00030001 0x00000033 + 0x00030002 0x00000043 + 0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; @@ -1013,7 +1010,7 @@ compatible = "fsl,ls1021a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; reg-names = "ftm"; - fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; big-endian; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 0c26467de4d0..5963566dbcc9 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -224,7 +224,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index cc498191ddd1..8f4eb1ed4581 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -81,7 +81,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 5f8f77cfbe59..f75806d0cd47 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -113,32 +113,9 @@ enable-active-high; }; - gpio_keys { - compatible = "gpio-keys"; - - volume_down { - label = "Volume Down"; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ - linux,code = <KEY_VOLUMEDOWN>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - - slider { - label = "Keypad Slide"; - gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - }; - soundcard { compatible = "audio-graph-card"; - label = "Droid 4 Audio"; + label = "Mapphone Audio"; widgets = "Speaker", "Earpiece", @@ -282,80 +259,6 @@ }; }; -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = < - - /* Row 1 */ - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 6, KEY_2) - MATRIX_KEY(2, 3, KEY_3) - MATRIX_KEY(0, 7, KEY_4) - MATRIX_KEY(0, 4, KEY_5) - MATRIX_KEY(5, 5, KEY_6) - MATRIX_KEY(0, 1, KEY_7) - MATRIX_KEY(0, 5, KEY_8) - MATRIX_KEY(0, 0, KEY_9) - MATRIX_KEY(1, 6, KEY_0) - - /* Row 2 */ - MATRIX_KEY(3, 4, KEY_APOSTROPHE) - MATRIX_KEY(7, 6, KEY_Q) - MATRIX_KEY(7, 7, KEY_W) - MATRIX_KEY(7, 2, KEY_E) - MATRIX_KEY(1, 0, KEY_R) - MATRIX_KEY(4, 4, KEY_T) - MATRIX_KEY(1, 2, KEY_Y) - MATRIX_KEY(6, 7, KEY_U) - MATRIX_KEY(2, 2, KEY_I) - MATRIX_KEY(5, 6, KEY_O) - MATRIX_KEY(3, 7, KEY_P) - MATRIX_KEY(6, 5, KEY_BACKSPACE) - - /* Row 3 */ - MATRIX_KEY(5, 4, KEY_TAB) - MATRIX_KEY(5, 7, KEY_A) - MATRIX_KEY(2, 7, KEY_S) - MATRIX_KEY(7, 0, KEY_D) - MATRIX_KEY(2, 6, KEY_F) - MATRIX_KEY(6, 2, KEY_G) - MATRIX_KEY(6, 6, KEY_H) - MATRIX_KEY(1, 4, KEY_J) - MATRIX_KEY(3, 1, KEY_K) - MATRIX_KEY(2, 1, KEY_L) - MATRIX_KEY(4, 6, KEY_ENTER) - - /* Row 4 */ - MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ - MATRIX_KEY(6, 1, KEY_Z) - MATRIX_KEY(7, 4, KEY_X) - MATRIX_KEY(5, 1, KEY_C) - MATRIX_KEY(1, 7, KEY_V) - MATRIX_KEY(2, 4, KEY_B) - MATRIX_KEY(4, 1, KEY_N) - MATRIX_KEY(1, 1, KEY_M) - MATRIX_KEY(3, 5, KEY_COMMA) - MATRIX_KEY(5, 2, KEY_DOT) - MATRIX_KEY(6, 3, KEY_UP) - MATRIX_KEY(7, 3, KEY_OK) - - /* Row 5 */ - MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ - MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ - MATRIX_KEY(6, 0, KEY_MINUS) - MATRIX_KEY(4, 7, KEY_EQUAL) - MATRIX_KEY(1, 5, KEY_SPACE) - MATRIX_KEY(3, 2, KEY_SLASH) - MATRIX_KEY(4, 3, KEY_LEFT) - MATRIX_KEY(5, 3, KEY_DOWN) - MATRIX_KEY(3, 3, KEY_RIGHT) - - /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ - MATRIX_KEY(5, 0, KEY_VOLUMEUP) - >; -}; - &mmc1 { vmmc-supply = <&vwlan2>; bus-width = <4>; @@ -395,34 +298,6 @@ }; }; -&i2c1 { - led-controller@38 { - compatible = "ti,lm3532"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x38>; - - enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - - ramp-up-us = <1024>; - ramp-down-us = <8193>; - - backlight_led: led@0 { - reg = <0>; - led-sources = <2>; - ti,led-mode = <0>; - label = ":backlight"; - }; - - led@1 { - reg = <1>; - led-sources = <1>; - ti,led-mode = <0>; - label = ":kbd_backlight"; - }; - }; -}; - &i2c2 { touchscreen@4a { compatible = "atmel,maxtouch"; @@ -796,20 +671,6 @@ "0", "0", "-1"; }; - - lis3dh: accelerometer@18 { - compatible = "st,lis3dh-accel"; - reg = <0x18>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ - - rotation-matrix = "0", "-1", "0", - "1", "0", "0", - "0", "0", "1"; - }; }; &mcbsp2 { diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi index cd911adef014..0bee517797f4 100644 --- a/arch/arm/boot/dts/mstar-infinity.dtsi +++ b/arch/arm/boot/dts/mstar-infinity.dtsi @@ -6,6 +6,13 @@ #include "mstar-v7.dtsi" +#include <dt-bindings/gpio/msc313-gpio.h> + &imi { reg = <0xa0000000 0x16000>; }; + +&gpio { + compatible = "mstar,msc313-gpio"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts new file mode 100644 index 000000000000..5d81641414a2 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +/dts-v1/; +#include "mstar-infinity2m-ssd202d.dtsi" + +/ { + model = "SSD201_HT_V2"; + compatible = "honestar,ssd201htv2", "mstar,infinity2m"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi new file mode 100644 index 000000000000..176e10a29896 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity2m-ssd20xd.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x20000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi new file mode 100644 index 000000000000..7a5e28b33f96 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity2m.dtsi" + +&smpctrl { + compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi new file mode 100644 index 000000000000..6d4d1d224e96 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity.dtsi" + +&cpus { + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; +}; + +&riu { + smpctrl: smpctrl@204000 { + reg = <0x204000 0x200>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index f07880561e11..b0a21b0b731f 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -12,7 +12,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; @@ -109,6 +109,16 @@ reg = <0x204400 0x200>; }; + gpio: gpio@207800 { + #gpio-cells = <2>; + reg = <0x207800 0x200>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&intc_fiq>; + status = "disabled"; + }; + pm_uart: uart@221000 { compatible = "ns16550a"; reg = <0x221000 0x100>; diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi index d2d0761295a4..3696980a3da1 100644 --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi @@ -3,6 +3,8 @@ // Copyright 2018 Google, Inc. #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> +#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> / { #address-cells = <1>; @@ -63,12 +65,6 @@ interrupt-parent = <&gic>; ranges = <0x0 0xf0000000 0x00900000>; - gcr: gcr@800000 { - compatible = "nuvoton,npcm750-gcr", "syscon", - "simple-mfd"; - reg = <0x800000 0x1000>; - }; - scu: scu@3fe000 { compatible = "arm,cortex-a9-scu"; reg = <0x3fe000 0x1000>; @@ -80,7 +76,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; - clocks = <&clk 10>; + clocks = <&clk NPCM7XX_CLK_AXI>; arm,shared-override; }; @@ -91,6 +87,16 @@ reg = <0x3ff000 0x1000>, <0x3fe100 0x100>; }; + + gcr: gcr@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd"; + reg = <0x800000 0x1000>; + }; + + rst: rst@801000 { + compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd"; + reg = <0x801000 0x6C>; + }; }; ahb { @@ -100,6 +106,12 @@ interrupt-parent = <&gic>; ranges; + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + }; + clk: clock-controller@f0801000 { compatible = "nuvoton,npcm750-clk", "syscon"; #clock-cells = <1>; @@ -109,6 +121,63 @@ clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; }; + gmac0: eth@f0802000 { + device_type = "network"; + compatible = "snps,dwmac"; + reg = <0xf0802000 0x2000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + ethernet = <0>; + clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; + clock-names = "stmmaceth", "clk_gmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rg1_pins + &rg1mdio_pins>; + status = "disabled"; + }; + + ehci1: usb@f0806000 { + compatible = "nuvoton,npcm750-ehci"; + reg = <0xf0806000 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + fiu0: spi@fb000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPI0>; + clock-names = "clk_spi0"; + status = "disabled"; + }; + + fiu3: spi@c0000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0000000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPI3>; + clock-names = "clk_spi3"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "disabled"; + }; + + fiux: spi@fb001000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb001000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPIX>; + clock-names = "clk_spix"; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -116,11 +185,73 @@ interrupt-parent = <&gic>; ranges = <0x0 0xf0000000 0x00300000>; + lpc_kcs: lpc_kcs@7000 { + compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon"; + reg = <0x7000 0x40>; + reg-io-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x40>; + + kcs1: kcs1@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + + kcs2: kcs2@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + + kcs3: kcs3@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + spi0: spi@200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0x200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + status = "disabled"; + }; + + spi1: spi@201000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0x201000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi2_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>; + status = "disabled"; + }; + timer0: timer@8000 { compatible = "nuvoton,npcm750-timer"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x8000 0x50>; - clocks = <&clk 5>; + reg = <0x8000 0x1C>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog0: watchdog@801C { @@ -128,7 +259,7 @@ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; reg = <0x801C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog1: watchdog@901C { @@ -136,7 +267,7 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; reg = <0x901C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog2: watchdog@a01C { @@ -144,13 +275,13 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; reg = <0xa01C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; serial0: serial@1000 { compatible = "nuvoton,npcm750-uart"; reg = <0x1000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -159,7 +290,7 @@ serial1: serial@2000 { compatible = "nuvoton,npcm750-uart"; reg = <0x2000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -168,7 +299,7 @@ serial2: serial@3000 { compatible = "nuvoton,npcm750-uart"; reg = <0x3000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -177,11 +308,815 @@ serial3: serial@4000 { compatible = "nuvoton,npcm750-uart"; reg = <0x4000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; }; + + rng: rng@b000 { + compatible = "nuvoton,npcm750-rng"; + reg = <0xb000 0x8>; + status = "disabled"; + }; + + adc: adc@c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xc000 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; + status = "disabled"; + }; + + pwm_fan: pwm-fan-controller@103000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nuvoton,npcm750-pwm-fan"; + reg = <0x103000 0x2000>, <0x180000 0x8000>; + reg-names = "pwm", "fan"; + clocks = <&clk NPCM7XX_CLK_APB3>, + <&clk NPCM7XX_CLK_APB4>; + clock-names = "pwm","fan"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins + &pwm2_pins &pwm3_pins + &pwm4_pins &pwm5_pins + &pwm6_pins &pwm7_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins + &fanin6_pins &fanin7_pins + &fanin8_pins &fanin9_pins + &fanin10_pins &fanin11_pins + &fanin12_pins &fanin13_pins + &fanin14_pins &fanin15_pins>; + status = "disabled"; + }; + + i2c0: i2c@80000 { + reg = <0x80000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb0_pins>; + status = "disabled"; + }; + + i2c1: i2c@81000 { + reg = <0x81000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb1_pins>; + status = "disabled"; + }; + + i2c2: i2c@82000 { + reg = <0x82000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb2_pins>; + status = "disabled"; + }; + + i2c3: i2c@83000 { + reg = <0x83000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb3_pins>; + status = "disabled"; + }; + + i2c4: i2c@84000 { + reg = <0x84000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb4_pins>; + status = "disabled"; + }; + + i2c5: i2c@85000 { + reg = <0x85000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb5_pins>; + status = "disabled"; + }; + + i2c6: i2c@86000 { + reg = <0x86000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb6_pins>; + status = "disabled"; + }; + + i2c7: i2c@87000 { + reg = <0x87000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb7_pins>; + status = "disabled"; + }; + + i2c8: i2c@88000 { + reg = <0x88000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb8_pins>; + status = "disabled"; + }; + + i2c9: i2c@89000 { + reg = <0x89000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb9_pins>; + status = "disabled"; + }; + + i2c10: i2c@8a000 { + reg = <0x8a000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb10_pins>; + status = "disabled"; + }; + + i2c11: i2c@8b000 { + reg = <0x8b000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb11_pins>; + status = "disabled"; + }; + + i2c12: i2c@8c000 { + reg = <0x8c000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb12_pins>; + status = "disabled"; + }; + + i2c13: i2c@8d000 { + reg = <0x8d000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb13_pins>; + status = "disabled"; + }; + + i2c14: i2c@8e000 { + reg = <0x8e000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb14_pins>; + status = "disabled"; + }; + + i2c15: i2c@8f000 { + reg = <0x8f000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb15_pins>; + status = "disabled"; + }; + }; + }; + + pinctrl: pinctrl@f0800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nuvoton,npcm750-pinctrl", "syscon", "simple-mfd"; + ranges = <0 0xf0010000 0x8000>; + gpio0: gpio@f0010000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + gpio1: gpio@f0011000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x80>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 32 32>; + }; + gpio2: gpio@f0012000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x80>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 64 32>; + }; + gpio3: gpio@f0013000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x3000 0x80>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 96 32>; + }; + gpio4: gpio@f0014000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x4000 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 128 32>; + }; + gpio5: gpio@f0015000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x5000 0x80>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 160 32>; + }; + gpio6: gpio@f0016000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x6000 0x80>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 192 32>; + }; + gpio7: gpio@f0017000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x7000 0x80>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 224 32>; + }; + + iox1_pins: iox1-pins { + groups = "iox1"; + function = "iox1"; + }; + iox2_pins: iox2-pins { + groups = "iox2"; + function = "iox2"; + }; + smb1d_pins: smb1d-pins { + groups = "smb1d"; + function = "smb1d"; + }; + smb2d_pins: smb2d-pins { + groups = "smb2d"; + function = "smb2d"; + }; + lkgpo1_pins: lkgpo1-pins { + groups = "lkgpo1"; + function = "lkgpo1"; + }; + lkgpo2_pins: lkgpo2-pins { + groups = "lkgpo2"; + function = "lkgpo2"; + }; + ioxh_pins: ioxh-pins { + groups = "ioxh"; + function = "ioxh"; + }; + gspi_pins: gspi-pins { + groups = "gspi"; + function = "gspi"; + }; + smb5b_pins: smb5b-pins { + groups = "smb5b"; + function = "smb5b"; + }; + smb5c_pins: smb5c-pins { + groups = "smb5c"; + function = "smb5c"; + }; + lkgpo0_pins: lkgpo0-pins { + groups = "lkgpo0"; + function = "lkgpo0"; + }; + pspi2_pins: pspi2-pins { + groups = "pspi2"; + function = "pspi2"; + }; + smb4den_pins: smb4den-pins { + groups = "smb4den"; + function = "smb4den"; + }; + smb4b_pins: smb4b-pins { + groups = "smb4b"; + function = "smb4b"; + }; + smb4c_pins: smb4c-pins { + groups = "smb4c"; + function = "smb4c"; + }; + smb15_pins: smb15-pins { + groups = "smb15"; + function = "smb15"; + }; + smb4d_pins: smb4d-pins { + groups = "smb4d"; + function = "smb4d"; + }; + smb14_pins: smb14-pins { + groups = "smb14"; + function = "smb14"; + }; + smb5_pins: smb5-pins { + groups = "smb5"; + function = "smb5"; + }; + smb4_pins: smb4-pins { + groups = "smb4"; + function = "smb4"; + }; + smb3_pins: smb3-pins { + groups = "smb3"; + function = "smb3"; + }; + spi0cs1_pins: spi0cs1-pins { + groups = "spi0cs1"; + function = "spi0cs1"; + }; + spi0cs2_pins: spi0cs2-pins { + groups = "spi0cs2"; + function = "spi0cs2"; + }; + spi0cs3_pins: spi0cs3-pins { + groups = "spi0cs3"; + function = "spi0cs3"; + }; + smb3c_pins: smb3c-pins { + groups = "smb3c"; + function = "smb3c"; + }; + smb3b_pins: smb3b-pins { + groups = "smb3b"; + function = "smb3b"; + }; + bmcuart0a_pins: bmcuart0a-pins { + groups = "bmcuart0a"; + function = "bmcuart0a"; + }; + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart1"; + }; + jtag2_pins: jtag2-pins { + groups = "jtag2"; + function = "jtag2"; + }; + bmcuart1_pins: bmcuart1-pins { + groups = "bmcuart1"; + function = "bmcuart1"; + }; + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart2"; + }; + bmcuart0b_pins: bmcuart0b-pins { + groups = "bmcuart0b"; + function = "bmcuart0b"; + }; + r1err_pins: r1err-pins { + groups = "r1err"; + function = "r1err"; + }; + r1md_pins: r1md-pins { + groups = "r1md"; + function = "r1md"; + }; + smb3d_pins: smb3d-pins { + groups = "smb3d"; + function = "smb3d"; + }; + fanin0_pins: fanin0-pins { + groups = "fanin0"; + function = "fanin0"; + }; + fanin1_pins: fanin1-pins { + groups = "fanin1"; + function = "fanin1"; + }; + fanin2_pins: fanin2-pins { + groups = "fanin2"; + function = "fanin2"; + }; + fanin3_pins: fanin3-pins { + groups = "fanin3"; + function = "fanin3"; + }; + fanin4_pins: fanin4-pins { + groups = "fanin4"; + function = "fanin4"; + }; + fanin5_pins: fanin5-pins { + groups = "fanin5"; + function = "fanin5"; + }; + fanin6_pins: fanin6-pins { + groups = "fanin6"; + function = "fanin6"; + }; + fanin7_pins: fanin7-pins { + groups = "fanin7"; + function = "fanin7"; + }; + fanin8_pins: fanin8-pins { + groups = "fanin8"; + function = "fanin8"; + }; + fanin9_pins: fanin9-pins { + groups = "fanin9"; + function = "fanin9"; + }; + fanin10_pins: fanin10-pins { + groups = "fanin10"; + function = "fanin10"; + }; + fanin11_pins: fanin11-pins { + groups = "fanin11"; + function = "fanin11"; + }; + fanin12_pins: fanin12-pins { + groups = "fanin12"; + function = "fanin12"; + }; + fanin13_pins: fanin13-pins { + groups = "fanin13"; + function = "fanin13"; + }; + fanin14_pins: fanin14-pins { + groups = "fanin14"; + function = "fanin14"; + }; + fanin15_pins: fanin15-pins { + groups = "fanin15"; + function = "fanin15"; + }; + pwm0_pins: pwm0-pins { + groups = "pwm0"; + function = "pwm0"; + }; + pwm1_pins: pwm1-pins { + groups = "pwm1"; + function = "pwm1"; + }; + pwm2_pins: pwm2-pins { + groups = "pwm2"; + function = "pwm2"; + }; + pwm3_pins: pwm3-pins { + groups = "pwm3"; + function = "pwm3"; + }; + r2_pins: r2-pins { + groups = "r2"; + function = "r2"; + }; + r2err_pins: r2err-pins { + groups = "r2err"; + function = "r2err"; + }; + r2md_pins: r2md-pins { + groups = "r2md"; + function = "r2md"; + }; + ga20kbc_pins: ga20kbc-pins { + groups = "ga20kbc"; + function = "ga20kbc"; + }; + smb5d_pins: smb5d-pins { + groups = "smb5d"; + function = "smb5d"; + }; + lpc_pins: lpc-pins { + groups = "lpc"; + function = "lpc"; + }; + espi_pins: espi-pins { + groups = "espi"; + function = "espi"; + }; + rg1_pins: rg1-pins { + groups = "rg1"; + function = "rg1"; + }; + rg1mdio_pins: rg1mdio-pins { + groups = "rg1mdio"; + function = "rg1mdio"; + }; + rg2_pins: rg2-pins { + groups = "rg2"; + function = "rg2"; + }; + ddr_pins: ddr-pins { + groups = "ddr"; + function = "ddr"; + }; + smb0_pins: smb0-pins { + groups = "smb0"; + function = "smb0"; + }; + smb1_pins: smb1-pins { + groups = "smb1"; + function = "smb1"; + }; + smb2_pins: smb2-pins { + groups = "smb2"; + function = "smb2"; + }; + smb2c_pins: smb2c-pins { + groups = "smb2c"; + function = "smb2c"; + }; + smb2b_pins: smb2b-pins { + groups = "smb2b"; + function = "smb2b"; + }; + smb1c_pins: smb1c-pins { + groups = "smb1c"; + function = "smb1c"; + }; + smb1b_pins: smb1b-pins { + groups = "smb1b"; + function = "smb1b"; + }; + smb8_pins: smb8-pins { + groups = "smb8"; + function = "smb8"; + }; + smb9_pins: smb9-pins { + groups = "smb9"; + function = "smb9"; + }; + smb10_pins: smb10-pins { + groups = "smb10"; + function = "smb10"; + }; + smb11_pins: smb11-pins { + groups = "smb11"; + function = "smb11"; + }; + sd1_pins: sd1-pins { + groups = "sd1"; + function = "sd1"; + }; + sd1pwr_pins: sd1pwr-pins { + groups = "sd1pwr"; + function = "sd1pwr"; + }; + pwm4_pins: pwm4-pins { + groups = "pwm4"; + function = "pwm4"; + }; + pwm5_pins: pwm5-pins { + groups = "pwm5"; + function = "pwm5"; + }; + pwm6_pins: pwm6-pins { + groups = "pwm6"; + function = "pwm6"; + }; + pwm7_pins: pwm7-pins { + groups = "pwm7"; + function = "pwm7"; + }; + mmc8_pins: mmc8-pins { + groups = "mmc8"; + function = "mmc8"; + }; + mmc_pins: mmc-pins { + groups = "mmc"; + function = "mmc"; + }; + mmcwp_pins: mmcwp-pins { + groups = "mmcwp"; + function = "mmcwp"; + }; + mmccd_pins: mmccd-pins { + groups = "mmccd"; + function = "mmccd"; + }; + mmcrst_pins: mmcrst-pins { + groups = "mmcrst"; + function = "mmcrst"; + }; + clkout_pins: clkout-pins { + groups = "clkout"; + function = "clkout"; + }; + serirq_pins: serirq-pins { + groups = "serirq"; + function = "serirq"; + }; + lpcclk_pins: lpcclk-pins { + groups = "lpcclk"; + function = "lpcclk"; + }; + scipme_pins: scipme-pins { + groups = "scipme"; + function = "scipme"; + }; + sci_pins: sci-pins { + groups = "sci"; + function = "sci"; + }; + smb6_pins: smb6-pins { + groups = "smb6"; + function = "smb6"; + }; + smb7_pins: smb7-pins { + groups = "smb7"; + function = "smb7"; + }; + pspi1_pins: pspi1-pins { + groups = "pspi1"; + function = "pspi1"; + }; + faninx_pins: faninx-pins { + groups = "faninx"; + function = "faninx"; + }; + r1_pins: r1-pins { + groups = "r1"; + function = "r1"; + }; + spi3_pins: spi3-pins { + groups = "spi3"; + function = "spi3"; + }; + spi3cs1_pins: spi3cs1-pins { + groups = "spi3cs1"; + function = "spi3cs1"; + }; + spi3quad_pins: spi3quad-pins { + groups = "spi3quad"; + function = "spi3quad"; + }; + spi3cs2_pins: spi3cs2-pins { + groups = "spi3cs2"; + function = "spi3cs2"; + }; + spi3cs3_pins: spi3cs3-pins { + groups = "spi3cs3"; + function = "spi3cs3"; + }; + nprd_smi_pins: nprd-smi-pins { + groups = "nprd_smi"; + function = "nprd_smi"; + }; + smb0b_pins: smb0b-pins { + groups = "smb0b"; + function = "smb0b"; + }; + smb0c_pins: smb0c-pins { + groups = "smb0c"; + function = "smb0c"; + }; + smb0den_pins: smb0den-pins { + groups = "smb0den"; + function = "smb0den"; + }; + smb0d_pins: smb0d-pins { + groups = "smb0d"; + function = "smb0d"; + }; + ddc_pins: ddc-pins { + groups = "ddc"; + function = "ddc"; + }; + rg2mdio_pins: rg2mdio-pins { + groups = "rg2mdio"; + function = "rg2mdio"; + }; + wdog1_pins: wdog1-pins { + groups = "wdog1"; + function = "wdog1"; + }; + wdog2_pins: wdog2-pins { + groups = "wdog2"; + function = "wdog2"; + }; + smb12_pins: smb12-pins { + groups = "smb12"; + function = "smb12"; + }; + smb13_pins: smb13-pins { + groups = "smb13"; + function = "smb13"; + }; + spix_pins: spix-pins { + groups = "spix"; + function = "spix"; + }; + spixcs1_pins: spixcs1-pins { + groups = "spixcs1"; + function = "spixcs1"; + }; + clkreq_pins: clkreq-pins { + groups = "clkreq"; + function = "clkreq"; + }; + hgpio0_pins: hgpio0-pins { + groups = "hgpio0"; + function = "hgpio0"; + }; + hgpio1_pins: hgpio1-pins { + groups = "hgpio1"; + function = "hgpio1"; + }; + hgpio2_pins: hgpio2-pins { + groups = "hgpio2"; + function = "hgpio2"; + }; + hgpio3_pins: hgpio3-pins { + groups = "hgpio3"; + function = "hgpio3"; + }; + hgpio4_pins: hgpio4-pins { + groups = "hgpio4"; + function = "hgpio4"; + }; + hgpio5_pins: hgpio5-pins { + groups = "hgpio5"; + function = "hgpio5"; + }; + hgpio6_pins: hgpio6-pins { + groups = "hgpio6"; + function = "hgpio6"; + }; + hgpio7_pins: hgpio7-pins { + groups = "hgpio7"; + function = "hgpio7"; }; }; }; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi new file mode 100644 index 000000000000..53cfd15fa03f --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com + +/ { + pinctrl: pinctrl@f0800000 { + gpio0pp_pins: gpio0pp-pins { + pins = "GPIO0/IOX1DI"; + bias-disable; + drive-push-pull; + }; + gpio1pp_pins: gpio1pp-pins { + pins = "GPIO1/IOX1LD"; + bias-disable; + drive-push-pull; + }; + gpio2pp_pins: gpio2pp-pins { + pins = "GPIO2/IOX1CK"; + bias-disable; + drive-push-pull; + }; + gpio3pp_pins: gpio3pp-pins { + pins = "GPIO3/IOX1D0"; + bias-disable; + drive-push-pull; + }; + gpio4pp_pins: gpio4pp-pins { + pins = "GPIO4/IOX2DI/SMB1DSDA"; + bias-disable; + drive-push-pull; + }; + gpio5pp_pins: gpio5pp-pins { + pins = "GPIO5/IOX2LD/SMB1DSCL"; + bias-disable; + drive-push-pull; + }; + gpio6pp_pins: gpio6pp-pins { + pins = "GPIO6/IOX2CK/SMB2DSDA"; + bias-disable; + drive-push-pull; + }; + gpio7pp_pins: gpio7pp-pins { + pins = "GPIO7/IOX2D0/SMB2DSCL"; + bias-disable; + drive-push-pull; + }; + gpio8_pins: gpio8-pins { + pins = "GPIO8/LKGPO1"; + bias-disable; + input-enable; + }; + gpio9_pins: gpio9-pins { + pins = "GPIO9/LKGPO2"; + bias-disable; + input-enable; + }; + gpio10pp_pins: gpio10pp-pins { + pins = "GPIO10/IOXHLD"; + bias-disable; + drive-push-pull; + }; + gpio11pp_pins: gpio11pp-pins { + pins = "GPIO11/IOXHCK"; + bias-disable; + drive-push-pull; + }; + gpio12_pins: gpio12-pins { + pins = "GPIO12/GSPICK/SMB5BSCL"; + bias-disable; + input-enable; + }; + gpio13_pins: gpio13-pins { + pins = "GPIO13/GSPIDO/SMB5BSDA"; + bias-disable; + input-enable; + }; + gpio14_pins: gpio14-pins { + pins = "GPIO14/GSPIDI/SMB5CSCL"; + bias-disable; + input-enable; + }; + gpio15od_pins: gpio15od-pins { + pins = "GPIO15/GSPICS/SMB5CSDA"; + bias-disable; + drive-open-drain; + }; + gpio17pp_pins: gpio17pp-pins { + pins = "GPIO17/PSPI2DI/SMB4DEN"; + bias-disable; + drive-push-pull; + }; + gpio18pp_pins: gpio18pp-pins { + pins = "GPIO18/PSPI2D0/SMB4BSDA"; + bias-disable; + drive-push-pull; + }; + gpio19pp_pins: gpio19pp-pins { + pins = "GPIO19/PSPI2CK/SMB4BSCL"; + bias-disable; + drive-push-pull; + }; + gpio24pp_pins: gpio24pp-pins { + pins = "GPIO24/IOXHDO"; + bias-disable; + drive-push-pull; + }; + gpio25pp_pins: gpio25pp-pins { + pins = "GPIO25/IOXHDI"; + bias-disable; + drive-push-pull; + }; + gpio37od_pins: gpio37od-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + drive-open-drain; + }; + gpio59pp_pins: gpio59pp-pins { + pins = "GPIO59/SMB3DSDA"; + bias-disable; + drive-push-pull; + }; + gpio60_pins: gpio60-pins { + pins = "GPIO60/SMB3DSCL"; + bias-disable; + input-enable; + }; + gpio72od_pins: gpio72od-pins { + pins = "GPIO72/FANIN8"; + bias-disable; + drive-open-drain; + }; + gpio73od_pins: gpio73od-pins { + pins = "GPIO73/FANIN9"; + bias-disable; + drive-open-drain; + }; + gpio74od_pins: gpio74od-pins { + pins = "GPIO74/FANIN10"; + bias-disable; + drive-open-drain; + }; + gpio75od_pins: gpio75od-pins { + pins = "GPIO75/FANIN11"; + bias-disable; + drive-open-drain; + }; + gpio76od_pins: gpio76od-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + drive-open-drain; + }; + gpio77od_pins: gpio77od-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + drive-open-drain; + }; + gpio78od_pins: gpio78od-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + drive-open-drain; + }; + gpio79od_pins: gpio79od-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + drive-open-drain; + }; + gpio83_pins: gpio83-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio84pp_pins: gpio84pp-pins { + pins = "GPIO84/R2TXD0"; + bias-disable; + drive-push-pull; + }; + gpio85pp_pins: gpio85pp-pins { + pins = "GPIO85/R2TXD1"; + bias-disable; + drive-push-pull; + }; + gpio86pp_pins: gpio86pp-pins { + pins = "GPIO86/R2TXEN"; + bias-disable; + drive-push-pull; + }; + gpio87pp_pins: gpio87pp-pins { + pins = "GPIO87/R2RXD0"; + bias-disable; + drive-push-pull; + }; + gpio88pp_pins: gpio88pp-pins { + pins = "GPIO88/R2RXD1"; + bias-disable; + drive-push-pull; + }; + gpio89pp_pins: gpio89pp-pins { + pins = "GPIO89/R2CRSDV"; + bias-disable; + drive-push-pull; + }; + gpio90pp_pins: gpio90pp-pins { + pins = "GPIO90/R2RXERR"; + bias-disable; + drive-push-pull; + }; + gpio91_pins: gpio91-pins { + pins = "GPIO91/R2MDC"; + bias-disable; + input-enable; + }; + gpio92_pins: gpio92-pins { + pins = "GPIO92/R2MDIO"; + bias-disable; + input-enable; + }; + gpio93pp_pins: gpio93pp-pins { + pins = "GPIO93/GA20/SMB5DSCL"; + bias-disable; + drive-push-pull; + }; + gpio94pp_pins: gpio94pp-pins { + pins = "GPIO94/nKBRST/SMB5DSDA"; + bias-disable; + drive-push-pull; + }; + gpio95_pins: gpio95-pins { + pins = "GPIO95/nLRESET/nESPIRST"; + bias-disable; + input-enable; + }; + gpio125pp_pins: gpio125pp-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + drive-push-pull; + }; + gpio126od_pins: gpio126od-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + drive-open-drain; + }; + gpio127od_pins: gpio127od-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + drive-open-drain; + }; + gpio136_pins: gpio136-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137_pins: gpio137-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + input-enable; + }; + gpio141_pins: gpio141-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio142od_pins: gpio142od-pins { + pins = "GPIO142/SD1CMD"; + bias-disable; + drive-open-drain; + }; + gpio143ol_pins: gpio143ol-pins { + pins = "GPIO143/SD1CD/SD1PWR"; + bias-disable; + output-low; + }; + gpio144_pins: gpio144-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145_pins: gpio145-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146_pins: gpio146-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147_pins: gpio147-pins { + pins = "GPIO147/PWM7"; + bias-disable; + input-enable; + }; + gpio148_pins: gpio148-pins { + pins = "GPIO148/MMCDT4"; + bias-disable; + input-enable; + }; + gpio149_pins: gpio149-pins { + pins = "GPIO149/MMCDT5"; + bias-disable; + input-enable; + }; + gpio150_pins: gpio150-pins { + pins = "GPIO150/MMCDT6"; + bias-disable; + input-enable; + }; + gpio151_pins: gpio151-pins { + pins = "GPIO151/MMCDT7"; + bias-disable; + input-enable; + }; + gpio152_pins: gpio152-pins { + pins = "GPIO152/MMCCLK"; + bias-disable; + input-enable; + }; + gpio153_pins: gpio153-pins { + pins = "GPIO153/MMCWP"; + bias-disable; + input-enable; + }; + gpio154_pins: gpio154-pins { + pins = "GPIO154/MMCCMD"; + bias-disable; + input-enable; + }; + gpio155_pins: gpio155-pins { + pins = "GPIO155/nMMCCD/nMMCRST"; + bias-disable; + input-enable; + }; + gpio156_pins: gpio156-pins { + pins = "GPIO156/MMCDT0"; + bias-disable; + input-enable; + }; + gpio157_pins: gpio157-pins { + pins = "GPIO157/MMCDT1"; + bias-disable; + input-enable; + }; + gpio158_pins: gpio158-pins { + pins = "GPIO158/MMCDT2"; + bias-disable; + input-enable; + }; + gpio159_pins: gpio159-pins { + pins = "GPIO159/MMCDT3"; + bias-disable; + input-enable; + }; + gpio161_pins: gpio161-pins { + pins = "GPIO161/nLFRAME/nESPICS"; + bias-disable; + input-enable; + }; + gpio162_pins: gpio162-pins { + pins = "GPIO162/SERIRQ"; + bias-disable; + input-enable; + }; + gpio163_pins: gpio163-pins { + pins = "GPIO163/LCLK/ESPICLK"; + bias-disable; + input-enable; + }; + gpio164_pins: gpio164-pins { + pins = "GPIO164/LAD0/ESPI_IO0"; + bias-disable; + input-enable; + }; + gpio165_pins: gpio165-pins { + pins = "GPIO165/LAD1/ESPI_IO1"; + bias-disable; + input-enable; + }; + gpio166_pins: gpio166-pins { + pins = "GPIO166/LAD2/ESPI_IO2"; + bias-disable; + input-enable; + }; + gpio167_pins: gpio167-pins { + pins = "GPIO167/LAD3/ESPI_IO3"; + bias-disable; + input-enable; + }; + gpio168_pins: gpio168-pins { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + input-enable; + }; + gpio169_pins: gpio169-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + input-enable; + }; + gpio170_pins: gpio170-pins { + pins = "GPIO170/nSMI"; + bias-disable; + input-enable; + }; + gpio175od_pins: gpio175od-pins { + pins = "GPIO175/PSPI1CK/FANIN19"; + bias-disable; + drive-open-drain; + }; + gpio176od_pins: gpio176od-pins { + pins = "GPIO176/PSPI1DO/FANIN18"; + bias-disable; + drive-open-drain; + }; + gpio177_pins: gpio177-pins { + pins = "GPIO177/PSPI1DI/FANIN17"; + bias-disable; + input-enable; + }; + gpio190od_pins: gpio190od-pins { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + drive-open-drain; + }; + gpio191_pins: gpio191-pins { + pins = "GPIO191"; + bias-disable; + input-enable; + }; + gpio192_pins: gpio192-pins { + pins = "GPIO192"; + bias-disable; + input-enable; + }; + gpio194pp_pins: gpio194pp-pins { + pins = "GPIO194/SMB0BSCL"; + bias-disable; + drive-push-pull; + }; + gpio195od_pins: gpio195od-pins { + pins = "GPIO195/SMB0BSDA"; + bias-disable; + drive-open-drain; + }; + gpio196od_pins: gpio196od-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + drive-open-drain; + }; + gpio197od_pins: gpio197od-pins { + pins = "GPIO197/SMB0DEN"; + bias-disable; + drive-open-drain; + }; + gpio198od_pins: gpio198od-pins { + pins = "GPIO198/SMB0DSDA"; + bias-disable; + drive-open-drain; + }; + gpio199od_pins: gpio199od-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + drive-open-drain; + }; + gpio200pp_pins: gpio200pp-pins { + pins = "GPIO200/R2CK"; + bias-disable; + drive-push-pull; + }; + gpio202od_pins: gpio202od-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + drive-open-drain; + }; + gpio203_pins: gpio203-pins { + pins = "GPIO203/FANIN16"; + bias-disable; + input-enable; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts new file mode 100644 index 000000000000..d4ff49939a3d --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Quanta Computer lnc. Fran.Hsu@quantatw.com + +/dts-v1/; +#include "nuvoton-npcm730.dtsi" +#include "nuvoton-npcm730-gsj-gpio.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Quanta GSJ Board (Device Tree v12)"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet1 = &gmac0; + serial3 = &serial3; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c15 = &i2c15; + fiu0 = &fiu0; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-bmc-live { + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + LED_U2_0_LOCATE { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_1_LOCATE { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_2_LOCATE { + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_3_LOCATE { + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_4_LOCATE { + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_5_LOCATE { + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_BMC_TRAY_PWRGD { + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_7_FAULT { + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_6_LOCATE { + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_7_LOCATE { + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_0_FAULT { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_1_FAULT { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_2_FAULT { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_3_FAULT { + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_4_FAULT { + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_5_FAULT { + gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_6_FAULT { + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x2000000>; + }; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0x80000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x1400000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + reserved@1f00000 { + label = "reserved"; + reg = <0x1f00000 0x100000>; + }; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + status = "okay"; + }; +}; + +&i2c2 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + status = "okay"; + }; +}; + +&i2c3 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + }; +}; + +&i2c4 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; +}; + +&i2c11 { + status = "okay"; + + /* P12V Quarter Brick DC/DC Power Module Q54SH12050 @60 */ + power-brick@36 { + compatible = "delta,dps800"; + reg = <0x36>; + }; + + hotswap@15 { + compatible = "ti,lm5066i"; + reg = <0x15>; + }; +}; + +&i2c12 { + status = "okay"; + + ucd90160@6b { + compatible = "ti,ucd90160"; + reg = <0x6b>; + }; +}; + +&i2c15 { + status = "okay"; + + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + i2c_u20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_u21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_u22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_u23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_u24: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_u25: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_u26: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c_u27: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&pwm_fan { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins>; + status = "okay"; + + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /* GPI pins*/ + &gpio8_pins + &gpio9_pins + &gpio12_pins + &gpio13_pins + &gpio14_pins + &gpio60_pins + &gpio83_pins + &gpio91_pins + &gpio92_pins + &gpio95_pins + &gpio136_pins + &gpio137_pins + &gpio141_pins + &gpio144_pins + &gpio145_pins + &gpio146_pins + &gpio147_pins + &gpio148_pins + &gpio149_pins + &gpio150_pins + &gpio151_pins + &gpio152_pins + &gpio153_pins + &gpio154_pins + &gpio155_pins + &gpio156_pins + &gpio157_pins + &gpio158_pins + &gpio159_pins + &gpio161_pins + &gpio162_pins + &gpio163_pins + &gpio164_pins + &gpio165_pins + &gpio166_pins + &gpio167_pins + &gpio168_pins + &gpio169_pins + &gpio170_pins + &gpio177_pins + &gpio191_pins + &gpio192_pins + &gpio203_pins + /* GPO pins*/ + &gpio0pp_pins + &gpio1pp_pins + &gpio2pp_pins + &gpio3pp_pins + &gpio4pp_pins + &gpio5pp_pins + &gpio6pp_pins + &gpio7pp_pins + &gpio10pp_pins + &gpio11pp_pins + &gpio15od_pins + &gpio17pp_pins + &gpio18pp_pins + &gpio19pp_pins + &gpio24pp_pins + &gpio25pp_pins + &gpio37od_pins + &gpio59pp_pins + &gpio72od_pins + &gpio73od_pins + &gpio74od_pins + &gpio75od_pins + &gpio76od_pins + &gpio77od_pins + &gpio78od_pins + &gpio79od_pins + &gpio84pp_pins + &gpio85pp_pins + &gpio86pp_pins + &gpio87pp_pins + &gpio88pp_pins + &gpio89pp_pins + &gpio90pp_pins + &gpio93pp_pins + &gpio94pp_pins + &gpio125pp_pins + &gpio126od_pins + &gpio127od_pins + &gpio142od_pins + &gpio143ol_pins + &gpio175od_pins + &gpio176od_pins + &gpio190od_pins + &gpio194pp_pins + &gpio195od_pins + &gpio196od_pins + &gpio197od_pins + &gpio198od_pins + &gpio199od_pins + &gpio200pp_pins + &gpio202od_pins + >; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts new file mode 100644 index 000000000000..82a104b2a65f --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -0,0 +1,826 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Fii USA Inc. + +/dts-v1/; +#include "nuvoton-npcm730.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Fii Kudo Board"; + compatible = "fii,kudo", "nuvoton,npcm730"; + + aliases { + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + + jtag_master { + compatible = "nuvoton,npcm750-jtag-master"; + #address-cells = <1>; + #size-cells = <1>; + + // dev/jtag0 + dev-num = <0>; + // pspi or gpio + mode = "pspi"; + + // pspi2 + pspi-controller = <2>; + reg = <0xf0201000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + + // TCK, TDI, TDO, TMS + jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>, + <&gpio0 18 GPIO_ACTIVE_HIGH>, + <&gpio0 17 GPIO_ACTIVE_HIGH>, + <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "heartbeat"; + gpios = <&gpio0 14 1>; + }; + }; + + pinctrl: pinctrl@f0800000 { + gpio61oh_pins: gpio61oh-pins { + pins = "GPO61/nDTR1_BOUT1/STRAP6"; + bias-disable; + output-high; + }; + gpio62oh_pins: gpio62oh-pins { + pins = "GPO62/nRTST1/STRAP5"; + bias-disable; + output-high; + }; + gpio161ol_pins: gpio161ol-pins { + pins = "GPIO161/nLFRAME/nESPICS"; + bias-disable; + output-low; + }; + gpio163i_pins: gpio163i-pins { + pins = "GPIO163/LCLK/ESPICLK"; + bias-disable; + input-enable; + }; + gpio167ol_pins: gpio167ol-pins { + pins = "GPIO167/LAD3/ESPI_IO3"; + bias-disable; + output-low; + }; + gpio95i_pins: gpio95i-pins { + pins = "GPIO95/nLRESET/nESPIRST"; + bias-disable; + input-enable; + }; + gpio65ol_pins: gpio65ol-pins { + pins = "GPIO65/FANIN1"; + bias-disable; + output-low; + }; + gpio66oh_pins: gpio66oh-pins { + pins = "GPIO66/FANIN2"; + bias-disable; + output-high; + }; + gpio67oh_pins: gpio67oh-pins { + pins = "GPIO67/FANIN3"; + bias-disable; + output-high; + }; + gpio68ol_pins: gpio68ol-pins { + pins = "GPIO68/FANIN4"; + bias-disable; + output-low; + }; + gpio69i_pins: gpio69i-pins { + pins = "GPIO69/FANIN5"; + bias-disable; + input-enable; + }; + gpio70ol_pins: gpio70ol-pins { + pins = "GPIO70/FANIN6"; + bias-disable; + output-low; + }; + gpio71i_pins: gpio71i-pins { + pins = "GPIO71/FANIN7"; + bias-disable; + input-enable; + }; + gpio72i_pins: gpio72i-pins { + pins = "GPIO72/FANIN8"; + bias-disable; + input-enable; + }; + gpio73i_pins: gpio73i-pins { + pins = "GPIO73/FANIN9"; + bias-disable; + input-enable; + }; + gpio74i_pins: gpio74i-pins { + pins = "GPIO74/FANIN10"; + bias-disable; + input-enable; + }; + gpio75i_pins: gpio75i-pins { + pins = "GPIO75/FANIN11"; + bias-disable; + input-enable; + }; + gpio76i_pins: gpio76i-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + input-enable; + }; + gpio77i_pins: gpio77i-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + input-enable; + }; + gpio78i_pins: gpio78i-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + input-enable; + }; + gpio79ol_pins: gpio79ol-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + output-low; + }; + gpio80oh_pins: gpio80oh-pins { + pins = "GPIO80/PWM0"; + bias-disable; + output-high; + }; + gpio81i_pins: gpio81i-pins { + pins = "GPIO81/PWM1"; + bias-disable; + input-enable; + }; + gpio82i_pins: gpio82i-pins { + pins = "GPIO82/PWM2"; + bias-disable; + input-enable; + }; + gpio83i_pins: gpio83i-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio144i_pins: gpio144i-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145i_pins: gpio145i-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146i_pins: gpio146i-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147oh_pins: gpio147oh-pins { + pins = "GPIO147/PWM7"; + bias-disable; + output-high; + }; + gpio168ol_pins: gpio168ol-pins { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + output-low; + }; + gpio169oh_pins: gpio169oh-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + output-high; + }; + gpio170ol_pins: gpio170ol-pins { + pins = "GPIO170/nSMI"; + bias-disable; + output-low; + }; + gpio218oh_pins: gpio218oh-pins { + pins = "GPIO218/nWDO1"; + bias-disable; + output-high; + }; + gpio37i_pins: gpio37i-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + input-enable; + }; + gpio38i_pins: gpio38i-pins { + pins = "GPIO38/SMB3CSCL"; + bias-disable; + input-enable; + }; + gpio39i_pins: gpio39i-pins { + pins = "GPIO39/SMB3BSDA"; + bias-disable; + input-enable; + }; + gpio40i_pins: gpio40i-pins { + pins = "GPIO40/SMB3BSCL"; + bias-disable; + input-enable; + }; + gpio121i_pins: gpio121i-pins { + pins = "GPIO121/SMB2CSCL"; + bias-disable; + input-enable; + }; + gpio122i_pins: gpio122i-pins { + pins = "GPIO122/SMB2BSDA"; + bias-disable; + input-enable; + }; + gpio123i_pins: gpio123i-pins { + pins = "GPIO123/SMB2BSCL"; + bias-disable; + input-enable; + }; + gpio124i_pins: gpio124i-pins { + pins = "GPIO124/SMB1CSDA"; + bias-disable; + input-enable; + }; + gpio125i_pins: gpio125i-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + input-enable; + }; + gpio126i_pins: gpio126i-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + input-enable; + }; + gpio127i_pins: gpio127i-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + input-enable; + }; + gpio136i_pins: gpio136i-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137oh_pins: gpio137oh-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + output-high; + }; + gpio138i_pins: gpio138i-pins { + pins = "GPIO138/SD1DT2"; + bias-disable; + input-enable; + }; + gpio139i_pins: gpio139i-pins { + pins = "GPIO139/SD1DT3"; + bias-disable; + input-enable; + }; + gpio140i_pins: gpio140i-pins { + pins = "GPIO140/SD1CLK"; + bias-disable; + input-enable; + }; + gpio141i_pins: gpio141i-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio190oh_pins: gpio190oh-pins { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + output-high; + }; + gpio191oh_pins: gpio191oh-pins { + pins = "GPIO191"; + bias-disable; + output-high; + }; + gpio195ol_pins: gpio195ol-pins { + pins = "GPIO195/SMB0BSDA"; + bias-disable; + output-low; + }; + gpio196ol_pins: gpio196ol-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + output-low; + }; + gpio199i_pins: gpio199i-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + input-enable; + }; + gpio202ol_pins: gpio202ol-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + output-low; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + label = "bmc"; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0xC0000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x3500000>; + }; + rwfs@3d00000 { + label = "rwfs"; + reg = <0x3d00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "bios"; + reg = <0x0 0x0>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + #io-channel-cells = <1>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // Rear-Fan + max31790@58 { + compatible = "maxim,max31790"; + reg = <0x58>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + // Mid-Fan + max31790@58 { + compatible = "maxim,max31790"; + reg = <0x58>; + }; + }; + + i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + // INLET1_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + // OUTLET1_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + // OUTLET2_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + // OUTLET3_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + }; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // STB-T + pmbus@74 { + compatible = "pmbus"; + reg = <0x74>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + + smpro@4e { + compatible = "ampere,smpro"; + reg = <0x4e>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // ADC sensors + adm1266@40 { + compatible = "adi,adm1266"; + reg = <0x40>; + }; + }; + + i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // ADC sensors + adm1266@41 { + compatible = "adi,adm1266"; + reg = <0x41>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c13 { + status = "okay"; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + // M2_ZONE_T + lm75@28 { + compatible = "ti,lm75"; + reg = <0x28>; + }; + }; + + i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + // BATT_ZONE_T + lm75@29 { + compatible = "ti,lm75"; + reg = <0x29>; + }; + }; + + i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + // NBM1_ZONE_T + lm75@28 { + compatible = "ti,lm75"; + reg = <0x28>; + }; + }; + i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + // NBM2_ZONE_T + lm75@29 { + compatible = "ti,lm75"; + reg = <0x29>; + }; + }; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + &gpio61oh_pins + &gpio62oh_pins + &gpio161ol_pins + &gpio163i_pins + &gpio167ol_pins + &gpio95i_pins + &gpio65ol_pins + &gpio66oh_pins + &gpio67oh_pins + &gpio68ol_pins + &gpio69i_pins + &gpio70ol_pins + &gpio71i_pins + &gpio72i_pins + &gpio73i_pins + &gpio74i_pins + &gpio75i_pins + &gpio76i_pins + &gpio77i_pins + &gpio78i_pins + &gpio79ol_pins + &gpio80oh_pins + &gpio81i_pins + &gpio82i_pins + &gpio83i_pins + &gpio144i_pins + &gpio145i_pins + &gpio146i_pins + &gpio147oh_pins + &gpio168ol_pins + &gpio169oh_pins + &gpio170ol_pins + &gpio218oh_pins + &gpio37i_pins + &gpio38i_pins + &gpio39i_pins + &gpio40i_pins + &gpio121i_pins + &gpio122i_pins + &gpio123i_pins + &gpio124i_pins + &gpio125i_pins + &gpio126i_pins + &gpio127i_pins + &gpio136i_pins + &gpio137oh_pins + &gpio138i_pins + &gpio139i_pins + &gpio140i_pins + &gpio141i_pins + &gpio190oh_pins + &gpio191oh_pins + &gpio195ol_pins + &gpio196ol_pins + &gpio199i_pins + &gpio202ol_pins + >; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton-npcm730.dtsi new file mode 100644 index 000000000000..86ec12ec2b50 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Nuvoton Technology + +#include "nuvoton-common-npcm7xx.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "nuvoton,npcm750-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + soc { + timer@3fe600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x3fe600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&clk NPCM7XX_CLK_AHB>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 15f744f1beea..9f13d08f5804 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -4,24 +4,161 @@ /dts-v1/; #include "nuvoton-npcm750.dtsi" +#include "dt-bindings/gpio/gpio.h" +#include "nuvoton-npcm750-pincfg-evb.dtsi" / { model = "Nuvoton npcm750 Development Board (Device Tree)"; compatible = "nuvoton,npcm750"; + aliases { + ethernet2 = &gmac0; + ethernet3 = &gmac1; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + fiu2 = &fiux; + }; + chosen { stdout-path = &serial3; }; memory { - reg = <0 0x40000000>; + device_type = "memory"; + reg = <0x0 0x20000000>; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fiu0 { + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <2>; + reg = <0>; + spi-max-frequency = <5000000>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bbuboot1@0 { + label = "bb-uboot-1"; + reg = <0x0000000 0x80000>; + read-only; + }; + bbuboot2@80000 { + label = "bb-uboot-2"; + reg = <0x0080000 0x80000>; + read-only; + }; + envparam@100000 { + label = "env-param"; + reg = <0x0100000 0x40000>; + read-only; + }; + spare@140000 { + label = "spare"; + reg = <0x0140000 0xC0000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x400000>; + }; + rootfs@600000 { + label = "rootfs"; + reg = <0x0600000 0x700000>; + }; + spare1@D00000 { + label = "spare1"; + reg = <0x0D00000 0x200000>; + }; + spare2@0F00000 { + label = "spare2"; + reg = <0x0F00000 0x200000>; + }; + spare3@1100000 { + label = "spare3"; + reg = <0x1100000 0x200000>; + }; + spare4@1300000 { + label = "spare4"; + reg = <0x1300000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <2>; + reg = <0>; + spi-max-frequency = <5000000>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x0>; + }; + }; }; }; +&fiux { + spix-mode; +}; + &watchdog1 { status = "okay"; }; +&rng { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -37,3 +174,231 @@ &serial3 { status = "okay"; }; + +&adc { + status = "okay"; +}; + +&lpc_kcs { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; +}; + +/* lm75 on SVB */ +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + lm75@48 { + compatible = "lm75"; + reg = <0x48>; + status = "okay"; + }; +}; + +/* lm75 on EB */ +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + lm75@48 { + compatible = "lm75"; + reg = <0x48>; + status = "okay"; + }; +}; + +/* tmp100 on EB */ +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + tmp100@48 { + compatible = "tmp100"; + reg = <0x48>; + status = "okay"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + status = "okay"; +}; + +/* tmp100 on SVB */ +&i2c6 { + clock-frequency = <100000>; + status = "okay"; + tmp100@48 { + compatible = "tmp100"; + reg = <0x48>; + status = "okay"; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c8 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c10 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c11 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <100000>; + status = "okay"; +}; + +&pwm_fan { + status = "okay"; + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@3 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x06 0x07>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@4 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x08 0x09>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@5 { + reg = <0x05>; + fan-tach-ch = /bits/ 8 <0x0A 0x0B>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@6 { + reg = <0x06>; + fan-tach-ch = /bits/ 8 <0x0C 0x0D>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@7 { + reg = <0x07>; + fan-tach-ch = /bits/ 8 <0x0E 0x0F>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + Flash@0 { + compatible = "winbond,w25q128", + "jedec,spi-nor"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <5000000>; + partition@0 { + label = "spi0_spare1"; + reg = <0x0000000 0x800000>; + }; + partition@1 { + label = "spi0_spare2"; + reg = <0x800000 0x0>; + }; + }; +}; + +&spi1 { + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + status = "okay"; + Flash@0 { + compatible = "winbond,w25q128fw", + "jedec,spi-nor"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <5000000>; + partition@0 { + label = "spi1_spare1"; + reg = <0x0000000 0x800000>; + }; + partition@1 { + label = "spi1_spare2"; + reg = <0x800000 0x0>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < &iox1_pins + &pin8_input + &pin9_output_high + &pin10_input + &pin11_output_high + &pin16_input + &pin24_output_high + &pin25_output_low + &pin32_output_high + &jtag2_pins + &pin61_output_high + &pin62_output_high + &pin63_output_high + &lpc_pins + &pin160_input + &pin162_input + &pin168_input + &pin169_input + &pin170_input + &pin187_output_high + &pin190_input + &pin191_output_high + &pin192_output_high + &pin197_output_low + &ddc_pins + &pin218_input + &pin219_output_low + &pin220_output_low + &pin221_output_high + &pin222_input + &pin223_output_low + &spix_pins + &pin228_output_low + &pin231_output_high + &pin255_input>; +}; + diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi new file mode 100644 index 000000000000..3b3806274adf --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology + +/ { + pinctrl: pinctrl@f0800000 { + pin8_input: pin8-input { + pins = "GPIO8/LKGPO1"; + bias-disable; + input-enable; + }; + pin9_output_high: pin9-output-high { + pins = "GPIO9/LKGPO2"; + bias-disable; + output-high; + }; + pin10_input: pin10-input { + pins = "GPIO10/IOXHLD"; + bias-disable; + input-enable; + }; + pin11_output_high: pin11-output-high { + pins = "GPIO11/IOXHCK"; + bias-disable; + output-high; + }; + pin16_input: pin16-input { + pins = "GPIO16/LKGPO0"; + bias-disable; + input-enable; + }; + pin24_output_high: pin24-output-high { + pins = "GPIO24/IOXHDO"; + bias-disable; + output-high; + }; + pin25_output_low: pin25-output-low { + pins = "GPIO25/IOXHDI"; + bias-disable; + output-low; + }; + pin32_output_high: pin32-output-high { + pins = "GPIO32/nSPI0CS1"; + bias-disable; + output-high; + }; + pin61_output_high: pin61-output-high { + pins = "GPO61/nDTR1_BOUT1/STRAP6"; + bias-disable; + output-high; + }; + pin62_output_high: pin62-output-high { + pins = "GPO62/nRTST1/STRAP5"; + bias-disable; + output-high; + }; + pin63_output_high: pin63-output-high { + pins = "GPO63/TXD1/STRAP4"; + bias-disable; + output-high; + }; + pin160_input: pin160-input { + pins = "GPIO160/CLKOUT/RNGOSCOUT"; + bias-disable; + input-enable; + }; + pin162_input: pin162-input { + pins = "GPIO162/SERIRQ"; + bias-disable; + input-enable; + }; + pin168_input: pin168-input { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + input-enable; + }; + pin169_input: pin169-input { + pins = "GPIO169/nSCIPME"; + bias-disable; + input-enable; + }; + pin170_input: pin170-input { + pins = "GPIO170/nSMI"; + bias-disable; + input-enable; + }; + pin187_output_high: pin187-output-high { + pins = "GPIO187/nSPI3CS1"; + bias-disable; + output-high; + }; + pin190_input: pin190-input { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + input-enable; + }; + pin191_output_high: pin191-output-high { + pins = "GPIO191"; + bias-disable; + output-high; + }; + pin192_output_high: pin192-output-high { + pins = "GPIO192"; + bias-disable; + output-high; + }; + pin197_output_low: pin197-output-low { + pins = "GPIO197/SMB0DEN"; + bias-disable; + output-low; + }; + pin218_input: pin218-input { + pins = "GPIO218/nWDO1"; + bias-disable; + input-enable; + }; + pin219_output_low: pin219-output-low { + pins = "GPIO219/nWDO2"; + bias-disable; + output-low; + }; + pin220_output_low: pin220-output-low { + pins = "GPIO220/SMB12SCL"; + bias-disable; + output-low; + }; + pin221_output_high: pin221-output-high { + pins = "GPIO221/SMB12SDA"; + bias-disable; + output-high; + }; + pin222_input: pin222-input { + pins = "GPIO222/SMB13SCL"; + bias-disable; + input-enable; + }; + pin223_output_low: pin223-output-low { + pins = "GPIO223/SMB13SDA"; + bias-disable; + output-low; + }; + pin228_output_low: pin228-output-low { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + output-low; + }; + pin231_output_high: pin231-output-high { + pins = "GPIO230/SPIXD3"; + bias-disable; + output-high; + }; + pin255_input: pin255-input { + pins = "GPI255/DACOSEL"; + bias-disable; + input-enable; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi new file mode 100644 index 000000000000..230cb344b2e1 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi @@ -0,0 +1,517 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Quanta Computer Inc. Samuel.Jiang@quantatw.com + +/ { + pinctrl: pinctrl@f0800000 { + gpio0ol_pins: gpio0ol-pins { + pins = "GPIO0/IOX1DI"; + bias-disable; + output-low; + }; + gpio1ol_pins: gpio1ol-pins { + pins = "GPIO1/IOX1LD"; + bias-disable; + output-low; + }; + gpio2ol_pins: gpio2ol-pins { + pins = "GPIO2/IOX1CK"; + bias-disable; + output-low; + }; + gpio3ol_pins: gpio3ol-pins { + pins = "GPIO3/IOX1D0"; + bias-disable; + output-low; + }; + gpio5_pins: gpio5-pins { + pins = "GPIO5/IOX2LD/SMB1DSCL"; + bias-disable; + input-enable; + }; + gpio6_pins: gpio6-pins { + pins = "GPIO6/IOX2CK/SMB2DSDA"; + bias-disable; + input-enable; + }; + gpio7_pins: gpio7-pins { + pins = "GPIO7/IOX2D0/SMB2DSCL"; + bias-disable; + input-enable; + }; + gpio8o_pins: gpio8o-pins { + pins = "GPIO8/LKGPO1"; + bias-disable; + output-high; + }; + gpio9ol_pins: gpio9ol-pins { + pins = "GPIO9/LKGPO2"; + bias-disable; + output-low; + }; + gpio10_pins: gpio10-pins { + pins = "GPIO10/IOXHLD"; + bias-disable; + input-enable; + }; + gpio11_pins: gpio11-pins { + pins = "GPIO11/IOXHCK"; + bias-disable; + input-enable; + }; + gpio12ol_pins: gpio12ol-pins { + pins = "GPIO12/GSPICK/SMB5BSCL"; + bias-disable; + output-low; + }; + gpio13ol_pins: gpio13ol-pins { + pins = "GPIO13/GSPIDO/SMB5BSDA"; + bias-disable; + output-low; + }; + gpio14ol_pins: gpio14ol-pins { + pins = "GPIO14/GSPIDI/SMB5CSCL"; + bias-disable; + output-low; + }; + gpio15ol_pins: gpio15ol-pins { + pins = "GPIO15/GSPICS/SMB5CSDA"; + bias-disable; + output-low; + }; + gpio20_pins: gpio20-pins { + pins = "GPIO20/SMB4CSDA/SMB15SDA"; + bias-disable; + input-enable; + }; + gpio21_pins: gpio21-pins { + pins = "GPIO21/SMB4CSCL/SMB15SCL"; + bias-disable; + input-enable; + }; + gpio22o_pins: gpio22o-pins { + pins = "GPIO22/SMB4DSDA/SMB14SDA"; + bias-disable; + output-high; + }; + gpio23_pins: gpio23-pins { + pins = "GPIO23/SMB4DSCL/SMB14SCL"; + bias-disable; + input-enable; + }; + gpio24_pins: gpio24-pins { + pins = "GPIO24/IOXHDO"; + bias-disable; + input-enable; + }; + gpio25_pins: gpio25-pins { + pins = "GPIO25/IOXHDI"; + bias-disable; + input-enable; + }; + gpio30_pins: gpio30-pins { + pins = "GPIO30/SMB3SDA"; + bias-disable; + input-enable; + }; + gpio31_pins: gpio31-pins { + pins = "GPIO31/SMB3SCL"; + bias-disable; + input-enable; + }; + gpio37o_pins: gpio37o-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + output-high; + }; + gpio38_pins: gpio38-pins { + pins = "GPIO38/SMB3CSCL"; + bias-disable; + input-enable; + }; + gpio39_pins: gpio39-pins { + pins = "GPIO39/SMB3BSDA"; + bias-disable; + input-enable; + }; + gpio40o_pins: gpio40o-pins { + pins = "GPIO40/SMB3BSCL"; + bias-disable; + output-high; + }; + gpio59_pins: gpio59-pins { + pins = "GPIO59/SMB3DSDA"; + bias-disable; + input-enable; + }; + gpio76_pins: gpio76-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + input-enable; + }; + gpio77_pins: gpio77-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + input-enable; + }; + gpio78o_pins: gpio78o-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + output-high; + }; + gpio79_pins: gpio79-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + input-enable; + }; + gpio82_pins: gpio82-pins { + pins = "GPIO82/PWM2"; + bias-disable; + input-enable; + }; + gpio83_pins: gpio83-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio84_pins: gpio84-pins { + pins = "GPIO84/R2TXD0"; + bias-disable; + input-enable; + }; + gpio85o_pins: gpio85o-pins { + pins = "GPIO85/R2TXD1"; + bias-disable; + output-high; + }; + gpio86ol_pins: gpio86ol-pins { + pins = "GPIO86/R2TXEN"; + bias-disable; + output-low; + }; + gpio87_pins: gpio87-pins { + pins = "GPIO87/R2RXD0"; + bias-disable; + input-enable; + }; + gpio88_pins: gpio88-pins { + pins = "GPIO88/R2RXD1"; + bias-disable; + input-enable; + }; + gpio89_pins: gpio89-pins { + pins = "GPIO89/R2CRSDV"; + bias-disable; + input-enable; + }; + gpio90_pins: gpio90-pins { + pins = "GPIO90/R2RXERR"; + bias-disable; + input-enable; + }; + gpio93_pins: gpio93-pins { + pins = "GPIO93/GA20/SMB5DSCL"; + bias-disable; + input-enable; + }; + gpio94ol_pins: gpio94ol-pins { + pins = "GPIO94/nKBRST/SMB5DSDA"; + bias-disable; + output-low; + }; + gpio108ol_pins: gpio108ol-pins { + pins = "GPIO108/RG1MDC"; + bias-disable; + output-low; + }; + gpio109ol_pins: gpio109ol-pins { + pins = "GPIO109/RG1MDIO"; + bias-disable; + output-low; + }; + gpio110ol_pins: gpio110ol-pins { + pins = "GPIO110/RG2TXD0/DDRV0"; + bias-disable; + output-low; + }; + gpio111ol_pins: gpio111ol-pins { + pins = "GPIO111/RG2TXD1/DDRV1"; + bias-disable; + output-low; + }; + gpio112ol_pins: gpio112ol-pins { + pins = "GPIO112/RG2TXD2/DDRV2"; + bias-disable; + output-low; + }; + gpio113ol_pins: gpio113ol-pins { + pins = "GPIO113/RG2TXD3/DDRV3"; + bias-disable; + output-low; + }; + gpio114o_pins: gpio114o-pins { + pins = "GPIO114/SMB0SCL"; + bias-disable; + output-high; + }; + gpio115_pins: gpio115-pins { + pins = "GPIO115/SMB0SDA"; + bias-disable; + input-enable; + }; + gpio120_pins: gpio120-pins { + pins = "GPIO120/SMB2CSDA"; + bias-disable; + input-enable; + }; + gpio121_pins: gpio121-pins { + pins = "GPIO121/SMB2CSCL"; + bias-disable; + input-enable; + }; + gpio122_pins: gpio122-pins { + pins = "GPIO122/SMB2BSDA"; + bias-disable; + input-enable; + }; + gpio123_pins: gpio123-pins { + pins = "GPIO123/SMB2BSCL"; + bias-disable; + input-enable; + }; + gpio124_pins: gpio124-pins { + pins = "GPIO124/SMB1CSDA"; + bias-disable; + input-enable; + }; + gpio125_pins: gpio125-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + input-enable; + }; + gpio126_pins: gpio126-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + input-enable; + }; + gpio127o_pins: gpio127o-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + output-high; + }; + gpio136_pins: gpio136-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137_pins: gpio137-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + input-enable; + }; + gpio138_pins: gpio138-pins { + pins = "GPIO138/SD1DT2"; + bias-disable; + input-enable; + }; + gpio139_pins: gpio139-pins { + pins = "GPIO139/SD1DT3"; + bias-disable; + input-enable; + }; + gpio140_pins: gpio140-pins { + pins = "GPIO140/SD1CLK"; + bias-disable; + input-enable; + }; + gpio141_pins: gpio141-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio142_pins: gpio142-pins { + pins = "GPIO142/SD1CMD"; + bias-disable; + input-enable; + }; + gpio143_pins: gpio143-pins { + pins = "GPIO143/SD1CD/SD1PWR"; + bias-disable; + input-enable; + }; + gpio144_pins: gpio144-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145_pins: gpio145-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146_pins: gpio146-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147_pins: gpio147-pins { + pins = "GPIO147/PWM7"; + bias-disable; + input-enable; + }; + gpio153o_pins: gpio153o-pins { + pins = "GPIO153/MMCWP"; + bias-disable; + output-high; + }; + gpio155_pins: gpio155-pins { + pins = "GPIO155/nMMCCD/nMMCRST"; + bias-disable; + input-enable; + }; + gpio160o_pins: gpio160o-pins { + pins = "GPIO160/CLKOUT/RNGOSCOUT"; + bias-disable; + output-high; + }; + gpio169o_pins: gpio169o-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + output-high; + }; + gpio188o_pins: gpio188o-pins { + pins = "GPIO188/SPI3D2/nSPI3CS2"; + bias-disable; + output-high; + }; + gpio189_pins: gpio189-pins { + pins = "GPIO189/SPI3D3/nSPI3CS3"; + bias-disable; + input-enable; + }; + gpio196_pins: gpio196-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + input-enable; + }; + gpio197_pins: gpio197-pins { + pins = "GPIO197/SMB0DEN"; + bias-disable; + input-enable; + }; + gpio198o_pins: gpio198o-pins { + pins = "GPIO198/SMB0DSDA"; + bias-disable; + output-high; + }; + gpio199o_pins: gpio199o-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + output-high; + }; + gpio200_pins: gpio200-pins { + pins = "GPIO200/R2CK"; + input-enable; + bias-disable; + }; + gpio202_pins: gpio202-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + input-enable; + }; + gpio203o_pins: gpio203o-pins { + pins = "GPIO203/FANIN16"; + bias-disable; + output-high; + }; + gpio208_pins: gpio208-pins { + pins = "GPIO208/RG2TXC/DVCK"; + bias-disable; + input-enable; + }; + gpio209ol_pins: gpio209ol-pins { + pins = "GPIO209/RG2TXCTL/DDRV4"; + bias-disable; + output-low; + }; + gpio210ol_pins: gpio210ol-pins { + pins = "GPIO210/RG2RXD0/DDRV5"; + bias-disable; + output-low; + }; + gpio211ol_pins: gpio211ol-pins { + pins = "GPIO211/RG2RXD1/DDRV6"; + bias-disable; + output-low; + }; + gpio212ol_pins: gpio212ol-pins { + pins = "GPIO212/RG2RXD2/DDRV7"; + bias-disable; + output-low; + }; + gpio213ol_pins: gpio213ol-pins { + pins = "GPIO213/RG2RXD3/DDRV8"; + bias-disable; + output-low; + }; + gpio214ol_pins: gpio214ol-pins { + pins = "GPIO214/RG2RXC/DDRV9"; + bias-disable; + output-low; + }; + gpio215ol_pins: gpio215ol-pins { + pins = "GPIO215/RG2RXCTL/DDRV10"; + bias-disable; + output-low; + }; + gpio216ol_pins: gpio216ol-pins { + pins = "GPIO216/RG2MDC/DDRV11"; + bias-disable; + output-low; + }; + gpio217ol_pins: gpio217ol-pins { + pins = "GPIO217/RG2MDIO/DVHSYNC"; + bias-disable; + output-low; + }; + gpio224_pins: gpio224-pins { + pins = "GPIO224/SPIXCK"; + bias-disable; + input-enable; + }; + gpio225ol_pins: gpio225ol-pins { + pins = "GPO225/SPIXD0/STRAP12"; + bias-disable; + output-low; + }; + gpio226ol_pins: gpio226ol-pins { + pins = "GPO226/SPIXD1/STRAP13"; + bias-disable; + output-low; + }; + gpio227ol_pins: gpio227ol-pins { + pins = "GPIO227/nSPIXCS0"; + bias-disable; + output-low; + }; + gpio228o_pins: gpio228ol-pins { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + output-high; + }; + gpio229o_pins: gpio229o-pins { + pins = "GPO229/SPIXD2/STRAP3"; + bias-disable; + output-high; + }; + gpio230_pins: gpio230-pins { + pins = "GPIO230/SPIXD3"; + bias-disable; + input-enable; + }; + gpio231o_pins: gpio231o-pins { + pins = "GPIO231/nCLKREQ"; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts new file mode 100644 index 000000000000..767e0ac0df7c --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -0,0 +1,1052 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology <kwliu@nuvoton.com> +// Copyright (c) 2019 Quanta Computer Inc. <Samuel.Jiang@quantatw.com> + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" +#include "nuvoton-npcm750-runbmc-olympus-pincfg.dtsi" + +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Nuvoton npcm750 RunBMC Olympus"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "heartbeat"; + gpios = <&gpio3 14 1>; + }; + + identify { + label = "identify"; + gpios = <&gpio3 15 1>; + }; + }; + + jtag { + compatible = "nuvoton,npcm750-jtag"; + enable_pspi_jtag = <1>; + pspi-index = <2>; + tck { + label = "tck"; + gpios = <&gpio0 19 0>; /* gpio19 */ + regbase = <0xf0010000 0x1000>; + }; + + tdi { + label = "tdi"; + gpios = <&gpio0 18 0>; /* gpio18 */ + regbase = <0xf0010000 0x1000>; + }; + + tdo { + label = "tdo"; + gpios = <&gpio0 17 0>; /* gpio17 */ + regbase = <0xf0010000 0x1000>; + }; + tms { + label = "tms"; + gpios = <&gpio0 16 0>; /* gpio16 */ + regbase = <0xf0010000 0x1000>; + }; + }; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x2000000>; + }; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0x80000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x1500000>; + }; + rwfs@1d00000 { + label = "rwfs"; + reg = <0x1d00000 0x300000>; + }; + }; + }; + + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&gcr { + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c_slot1a: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_slot1b: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_slot2a: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_slot2b: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_slot3: i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_slot4: i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_slot5: i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c_m2_s1: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_m2_s2: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c_m2_s3: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_m2_s4: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + power-supply@58 { + compatible = "delta,dps800"; + reg = <0x58>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-slave-mqueue@10 { + compatible = "i2c-slave-mqueue"; + reg = <(I2C_OWN_SLAVE_ADDRESS | 0x10)>; + }; +}; + +&i2c6 { + status = "okay"; + + ina219@40 { + compatible = "ti,ina219"; + reg = <0x40>; + }; + ina219@41 { + compatible = "ti,ina219"; + reg = <0x41>; + }; + ina219@44 { + compatible = "ti,ina219"; + reg = <0x44>; + }; + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + tps53679@60 { + compatible = "ti,tps53679"; + reg = <0x60>; + }; + tps53659@62 { + compatible = "ti,tps53659"; + reg = <0x62>; + }; + tps53659@64 { + compatible = "ti,tps53659"; + reg = <0x64>; + }; + tps53622@67 { + compatible = "ti,tps53622"; + reg = <0x67>; + }; + tps53622@69 { + compatible = "ti,tps53622"; + reg = <0x69>; + }; + tps53679@70 { + compatible = "ti,tps53679"; + reg = <0x70>; + }; + tps53659@72 { + compatible = "ti,tps53659"; + reg = <0x72>; + }; + tps53659@74 { + compatible = "ti,tps53659"; + reg = <0x74>; + }; + tps53622@77 { + compatible = "ti,tps53622"; + reg = <0x77>; + }; +}; + +&i2c7 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c8 { + status = "okay"; + + adm1278@11 { + compatible = "adm1278"; + reg = <0x11>; + Rsense = <500>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + + gpio: pca9555@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c11 { + status = "okay"; + + pca9539_g1a: pca9539-g1a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + G1A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "TPM_BMC_ALERT_N"; + }; + G1A_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_TOP_SWAP"; + }; + G1A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_BIOS_PREFRB2_GOOD"; + }; + G1A_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "BMC_SATAXPCIE_0TO3_SEL"; + }; + G1A_P0_4 { + gpio-hog; + gpios = <4 0>; + input; + line-name = "BMC_SATAXPCIE_4TO7_SEL"; + }; + G1A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-low; + line-name = "FM_UV_ADR_TRIGGER_EN_N"; + }; + G1A_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "RM_THROTTLE_EN_N"; + }; + G1A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_BMC_TPM_PRES_N"; + }; + G1A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_CPU0_SKTOCC_LVT3_N"; + }; + G1A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_CPU1_SKTOCC_LVT3_N"; + }; + G1A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_ALERT_N"; + }; + G1A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "PSU2_ALERT_N"; + }; + G1A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "H_CPU0_FAST_WAKE_LVT3_N"; + }; + G1A_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "I2C_MUX1_RESET_N"; + }; + G1A_P1_7 { + gpio-hog; + gpios = <15 0>; + input; + line-name = "FM_CPU_CATERR_LVT3_N"; + }; + }; + + pca9539_g1b: pca9539-g1b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G1B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "PVDDQ_ABC_PINALERT_N"; + }; + G1B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "PVDDQ_DEF_PINALERT_N"; + }; + G1B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "PVDDQ_GHJ_PINALERT_N"; + }; + G1B_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "PVDDQ_KLM_PINALERT_N"; + }; + G1B_P0_5 { + gpio-hog; + gpios = <5 0>; + input; + line-name = "FM_BOARD_REV_ID0"; + }; + G1B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BOARD_REV_ID1"; + }; + G1B_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "FM_BOARD_REV_ID2"; + }; + G1B_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_OC_DETECT_EN_N"; + }; + G1B_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_FLASH_DESC_OVERRIDE"; + }; + G1B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "FP_PWR_ID_LED_N"; + }; + G1B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-low; + line-name = "BMC_LED_PWR_GRN"; + }; + G1B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-low; + line-name = "BMC_LED_PWR_AMBER"; + }; + G1B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "FM_BMC_FAULT_LED_N"; + }; + G1B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_CPLD_BMC_PWRDN_N"; + }; + G1B_P1_7 { + gpio-hog; + gpios = <15 0>; + output-high; + line-name = "BMC_LED_CATERR_N"; + }; + }; +}; + +&i2c12 { + status = "okay"; + + pca9539_g2a: pca9539-g2a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + G2A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "BMC_PON_RST_REQ_N"; + }; + G2A_P0_1 { + gpio-hog; + gpios = <1 0>; + output-high; + line-name = "BMC_RST_IND_REQ_N"; + }; + G2A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "RST_BMC_RTCRST"; + }; + G2A_P0_3 { + gpio-hog; + gpios = <3 0>; + output-high; + line-name = "FM_BMC_PWRBTN_OUT_N"; + }; + G2A_P0_4 { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "RST_BMC_SYSRST_BTN_OUT_N"; + }; + G2A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "FM_BATTERY_SENSE_EN_N"; + }; + G2A_P0_6 { + gpio-hog; + gpios = <6 0>; + output-high; + line-name = "FM_BMC_READY_N"; + }; + G2A_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + G2A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_SLOT4_CFG0"; + }; + G2A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_SLOT4_CFG1"; + }; + G2A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_NVDIMM_EVENT_N"; + }; + G2A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_BLADE_EN_N"; + }; + G2A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "BMC_PCH_FNM"; + }; + G2A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "FM_SOL_UART_CH_SEL"; + }; + G2A_P1_6 { + gpio-hog; + gpios = <14 0>; + input; + line-name = "FM_BIOS_POST_CMPLT_N"; + }; + }; + + pca9539_g2b: pca9539-g2b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G2B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "FM_CPU_MSMI_LVT3_N"; + }; + G2B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS"; + }; + G2B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_CPU1_DISABLE_BMC_N"; + }; + G2B_P0_3 { + gpio-hog; + gpios = <3 0>; + output-low; + line-name = "BMC_JTAG_SELECT"; + }; + G2B_P0_4 { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PECI_MUX_SELECT"; + }; + G2B_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "I2C_MUX2_RESET_N"; + }; + G2B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BMC_CPLD_PSU2_ON"; + }; + G2B_P0_7 { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "PSU2_ALERT_EN_N"; + }; + G2B_P1_0 { + gpio-hog; + gpios = <8 0>; + output-high; + line-name = "FM_CPU_BMC_INIT"; + }; + G2B_P1_1 { + gpio-hog; + gpios = <9 0>; + output-high; + line-name = "IRQ_BMC_PCH_SCI_LPC_N"; + }; + G2B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "PMB_ALERT_EN_N"; + }; + G2B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-high; + line-name = "FM_FAST_PROCHOT_EN_N"; + }; + G2B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-high; + line-name = "BMC_NVDIMM_PRSNT_N"; + }; + G2B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-low; + line-name = "FM_BACKUP_BIOS_SEL_H_BMC"; + }; + G2B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_PWRBRK_N"; + }; + }; +}; + +&i2c13 { + status = "okay"; + + tmp75@4a { + compatible = "ti,tmp75"; + reg = <0x4a>; + status = "okay"; + }; + m24128_fru@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <64>; + status = "okay"; + }; +}; + +&pwm_fan { + pinctrl-names = "default"; + pinctrl-0 = < &pwm0_pins &pwm1_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins + &fanin6_pins &fanin7_pins + &fanin8_pins &fanin9_pins + &fanin10_pins &fanin11_pins>; + status = "okay"; + + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@3 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x06 0x07>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@4 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x08 0x09>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@5 { + reg = <0x05>; + fan-tach-ch = /bits/ 8 <0x0A 0x0B>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@6 { + reg = <0x06>; + fan-tach-ch = /bits/ 8 <0x0C 0x0D>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@7 { + reg = <0x07>; + fan-tach-ch = /bits/ 8 <0x0E 0x0F>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + #io-channel-cells = <1>; + status = "okay"; +}; + +&kcs1 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; +}; + +&kcs3 { + status = "okay"; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /******* RunBMC inside Module pins *******/ + &gpio0ol_pins + &gpio1ol_pins + &gpio2ol_pins + &gpio3ol_pins + &gpio8o_pins + &gpio9ol_pins + &gpio12ol_pins + &gpio13ol_pins + &gpio14ol_pins + &gpio15ol_pins + &gpio37o_pins + &gpio38_pins + &gpio39_pins + &gpio94ol_pins + &gpio108ol_pins + &gpio109ol_pins + &gpio111ol_pins + &gpio112ol_pins + &gpio113ol_pins + &gpio208_pins + &gpio209ol_pins + &gpio210ol_pins + &gpio211ol_pins + &gpio212ol_pins + &gpio213ol_pins + &gpio214ol_pins + &gpio215ol_pins + &gpio216ol_pins + &gpio217ol_pins + /******* RunBMC outside Connector pins *******/ + &gpio5_pins + &gpio6_pins + &gpio7_pins + &gpio10_pins + &gpio11_pins + &gpio20_pins + &gpio21_pins + &gpio22o_pins + &gpio23_pins + &gpio24_pins + &gpio25_pins + &gpio30_pins + &gpio31_pins + &gpio40o_pins + &gpio59_pins + &gpio76_pins + &gpio77_pins + &gpio78o_pins + &gpio79_pins + &gpio82_pins + &gpio83_pins + &gpio84_pins + &gpio85o_pins + &gpio86ol_pins + &gpio87_pins + &gpio88_pins + &gpio89_pins + &gpio90_pins + &gpio93_pins + &gpio114o_pins + &gpio115_pins + &gpio120_pins + &gpio121_pins + &gpio122_pins + &gpio123_pins + &gpio124_pins + &gpio125_pins + &gpio126_pins + &gpio127o_pins + &gpio136_pins + &gpio137_pins + &gpio138_pins + &gpio139_pins + &gpio140_pins + &gpio141_pins + &gpio142_pins + &gpio143_pins + &gpio144_pins + &gpio146_pins + &gpio145_pins + &gpio147_pins + &gpio153o_pins + &gpio155_pins + &gpio160o_pins + &gpio169o_pins + &gpio188o_pins + &gpio189_pins + &gpio196_pins + &gpio197_pins + &gpio198o_pins + &gpio199o_pins + &gpio200_pins + &gpio202_pins + &gpio203o_pins + &gpio224_pins + &gpio225ol_pins + &gpio226ol_pins + &gpio227ol_pins + &gpio228o_pins + &gpio229o_pins + &gpio230_pins + &gpio231o_pins + &ddc_pins + &wdog1_pins + &wdog2_pins + >; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi index 6ac340533587..13eee0fe5642 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi @@ -17,7 +17,7 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; - clocks = <&clk 0>; + clocks = <&clk NPCM7XX_CLK_CPU>; clock-names = "clk_cpu"; reg = <0>; next-level-cache = <&l2>; @@ -26,19 +26,37 @@ cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; - clocks = <&clk 0>; + clocks = <&clk NPCM7XX_CLK_CPU>; clock-names = "clk_cpu"; reg = <1>; next-level-cache = <&l2>; }; }; + soc { timer@3fe600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x3fe600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_AHB>; + }; + }; + + ahb { + gmac1: eth@f0804000 { + device_type = "network"; + compatible = "snps,dwmac"; + reg = <0xf0804000 0x2000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + ethernet = <1>; + clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; + clock-names = "stmmaceth", "clk_gmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rg2_pins + &rg2mdio_pins>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 252507cf300b..a858ebfa1500 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -34,26 +34,26 @@ clock-frequency = <26000000>; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - heartbeat { + led-1 { label = "beagleboard::usr0"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; - mmc { + led-2 { label = "beagleboard::usr1"; gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - pmu_stat { + led-3 { label = "beagleboard::pmu_stat"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 971d3e250515..006a6d97231c 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -14,10 +14,10 @@ reg = <0 0>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - overo { + led-1 { label = "overo:blue:COM"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts index ba5c35b7027d..ccf03a743678 100644 --- a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts @@ -7,3 +7,49 @@ model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 0, KEY_VOLUMEDOWN) + >; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + }; +}; + +&i2c4 { + kxtf9: accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0x0f>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index c0d2fd92aea3..3ea4c5b9fd31 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -4,6 +4,149 @@ #include "motorola-mapphone-common.dtsi" / { + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; +}; + +/ { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c4 { + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index 31d856b58f8a..e59d17b25a1d 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -15,16 +15,16 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; - pwmleds { + led-controller { compatible = "pwm-leds"; - green { + led-1 { label = "green"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; - orange { + led-2 { label = "orange"; pwms = <&twl_pwm 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index cfa85aa3da08..7c6886cd738f 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -46,7 +46,23 @@ button_pins: pinmux_button_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ + OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; }; @@ -80,3 +96,19 @@ &gpio1_target { ti,no-reset-on-init; }; + +&wl12xx_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins &bt_pins>; + bluetooth: tiwi { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* GPIO_46 */ + }; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index afb49a2d6963..9e976140f34a 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -45,58 +45,60 @@ regulator-boot-on; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - debug0 { + + led-1 { label = "omap4:green:debug0"; gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ }; - debug1 { + led-2 { label = "omap4:green:debug1"; gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ }; - debug2 { + led-3 { label = "omap4:green:debug2"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ }; - debug3 { + led-4 { label = "omap4:green:debug3"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ }; - debug4 { + led-5 { label = "omap4:green:debug4"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ }; - user1 { + led-6 { label = "omap4:blue:user"; gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ }; - user2 { + led-7 { label = "omap4:red:user"; gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ }; - user3 { + led-8 { label = "omap4:green:user"; gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - kpad { + + led-9 { label = "omap4::keypad"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; - charging { + led-10 { label = "omap4:green:chrg"; pwms = <&twl_pwmled 0 7812500>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index f3d3a16b7c64..887b3359dd5a 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -194,7 +194,7 @@ #size-cells = <1>; utmi-mode = <2>; ranges = <0 0 0x20000>; - dwc3: dwc3@10000 { + dwc3: usb@10000 { compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi new file mode 100644 index 000000000000..91163867be34 --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Bytedance. + */ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; // 384KB + label = "u-boot"; + }; + + u-boot-env@60000 { + reg = <0x60000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@80000 { + reg = <0x80000 0x500000>; // 5MB + label = "kernel"; + }; + + rofs@580000 { + reg = <0x580000 0x2a80000>; // 42.5MB + label = "rofs"; + }; + + rwfs@3000000 { + reg = <0x3000000 0x1000000>; // 16MB + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 32b474bfeec3..e769f638f205 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -566,6 +566,22 @@ usb_otg_vbus: usb-otg-vbus { }; }; + + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; + + interrupt-parent = <&msmgpio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + + maxim,alert-low-soc-level = <2>; + }; }; i2c@f9924000 { @@ -706,6 +722,15 @@ power-source = <PM8941_GPIO_S3>; }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; + + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + wlan_sleep_clk_pin: wl-sleep-clk { pins = "gpio16"; function = "func2"; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index d4dc98214225..97352de91314 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> / { model = "Samsung Galaxy S5"; @@ -11,6 +12,8 @@ aliases { serial0 = &blsp1_uart1; + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -145,7 +148,7 @@ }; pma8084_l19: l19 { - regulator-min-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -160,6 +163,9 @@ pma8084_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-system-load = <200000>; }; pma8084_l22: l22 { @@ -203,6 +209,95 @@ }; }; + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; @@ -258,9 +353,109 @@ bias-pull-up; }; }; + + sdhc2_pin_a: sdhc2-pin-active { + clk-cmd-data { + pins = "gpio35", "gpio36", "gpio37", "gpio38", + "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + }; + + sdhc2_cd_pin: sdhc2-cd { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + mux { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + mux { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + }; + + gpioex_pin: gpioex { + res { + pins = "gpio145"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + wifi_pin: wifi { + int { + pins = "gpio92"; + function = "gpio"; + + input-enable; + bias-pull-down; + }; + }; }; - sdhci@f9824900 { + sdhc_1: sdhci@f9824900 { status = "ok"; vmmc-supply = <&pma8084_l20>; @@ -273,6 +468,55 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhc_2: sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + bus-width = <4>; + + /* cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; + // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + }; + + sdhci@f98a4900 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + max-frequency = <100000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + + bus-width = <4>; + non-removable; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&msmgpio>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; + }; + usb@f9a55000 { status = "ok"; @@ -298,14 +542,38 @@ }; }; - pinctrl@fd510000 { - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; + i2c@f9924000 { + status = "okay"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; }; }; @@ -408,6 +676,27 @@ }; }; }; + + i2c@f9968000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; + }; }; &spmi_bus { @@ -420,6 +709,39 @@ bias-pull-up; power-source = <PMA8084_GPIO_S4>; }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index ea1ca166165c..e921c5e93a5d 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -68,7 +68,6 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - io-channel-ranges; die_temp { reg = <VADC_DIE_TEMP>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 961c0f2eeefb..98c3fbd89fa6 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -20,6 +20,30 @@ serial5 = &hscif0; ethernet1 = ðer; }; + + mclk_cam1: mclk-cam1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam2: mclk-cam2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam3: mclk-cam3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam4: mclk-cam4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; }; &avb { @@ -47,6 +71,19 @@ }; }; +&gpio0 { + /* Disable hogging GP0_18 to output LOW */ + /delete-node/ qspi_en; + + /* Hog GP0_18 to output HIGH to enable VIN2 */ + vin2_en { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "VIN2_EN"; + }; +}; + &hscif0 { pinctrl-0 = <&hscif0_pins>; pinctrl-names = "default"; @@ -54,6 +91,94 @@ status = "okay"; }; +&i2c0 { + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam1>; + clock-names = "xclk"; + + port { + ov5640_0: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam2>; + clock-names = "xclk"; + + port { + ov5640_1: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin1ep>; + }; + }; + }; +}; + +&i2c2 { + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam3>; + clock-names = "xclk"; + + port { + ov5640_2: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin2ep>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam4>; + clock-names = "xclk"; + + port { + ov5640_3: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin3ep>; + }; + }; + }; +}; + &pfc { can0_pins: can0 { groups = "can0_data_d"; @@ -70,6 +195,16 @@ function = "hscif0"; }; + i2c1_pins: i2c1 { + groups = "i2c1_c"; + function = "i2c1"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -84,6 +219,31 @@ groups = "scifb1_data"; function = "scifb1"; }; + + vin0_8bit_pins: vin0 { + groups = "vin0_data8", "vin0_clk", "vin0_sync"; + function = "vin0"; + }; + + vin1_8bit_pins: vin1 { + groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b"; + function = "vin1"; + }; + + vin2_pins: vin2 { + groups = "vin2_g8", "vin2_clk"; + function = "vin2"; + }; + + vin3_pins: vin3 { + groups = "vin3_data8", "vin3_clk", "vin3_sync"; + function = "vin3"; + }; +}; + +&qspi { + /* Pins shared with VIN2, keep status disabled */ + status = "disabled"; }; &scif0 { @@ -106,3 +266,65 @@ rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; }; + +&vin0 { + /* + * Set SW2 switch on the SOM to 'ON' + * Set SW1 switch on camera board to 'OFF' as we are using 8bit mode + */ + status = "okay"; + pinctrl-0 = <&vin0_8bit_pins>; + pinctrl-names = "default"; + + port { + vin0ep: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; + +&vin1 { + /* Set SW1 switch on the SOM to 'ON' */ + status = "okay"; + pinctrl-0 = <&vin1_8bit_pins>; + pinctrl-names = "default"; + + port { + vin1ep: endpoint { + remote-endpoint = <&ov5640_1>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; + +&vin2 { + status = "okay"; + pinctrl-0 = <&vin2_pins>; + pinctrl-names = "default"; + + port { + vin2ep: endpoint { + remote-endpoint = <&ov5640_2>; + bus-width = <8>; + data-shift = <8>; + bus-type = <6>; + }; + }; +}; + +&vin3 { + status = "okay"; + pinctrl-0 = <&vin3_pins>; + pinctrl-names = "default"; + + port { + vin3ep: endpoint { + remote-endpoint = <&ov5640_3>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index c2c05c9685d1..0063ef92f50e 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7742-iwg21m.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; @@ -52,6 +53,16 @@ clock-frequency = <26000000>; }; + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + default-brightness-level = <7>; + enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + }; + leds { compatible = "gpio-leds"; @@ -62,6 +73,41 @@ }; }; + lvds-receiver { + compatible = "ti,ds90cf384a", "lvds-decoder"; + power-supply = <&vcc_3v3_tft1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_receiver_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + lvds_receiver_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0dh6"; + backlight = <&lcd_backlight>; + power-supply = <&vcc_3v3_tft1>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_receiver_out>; + }; + }; + }; + reg_1p5v: 1p5v { compatible = "regulator-fixed"; regulator-name = "1P5V"; @@ -85,6 +131,17 @@ }; }; + vcc_3v3_tft1: regulator-panel { + compatible = "regulator-fixed"; + + regulator-name = "vcc-3v3-tft1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + startup-delay-us = <500>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + }; + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; @@ -139,6 +196,16 @@ VDDIO-supply = <®_3p3v>; VDDD-supply = <®_1p5v>; }; + + touch: touchpanel@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + /* GP1_29 is also shared with audio codec reset pin */ + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc_3v3_tft1>; + }; }; &can1 { @@ -152,6 +219,18 @@ status = "okay"; }; +&du { + status = "okay"; +}; + +&gpio0 { + touch-interrupt { + gpio-hog; + gpios = <24 GPIO_ACTIVE_LOW>; + input; + }; +}; + &gpio1 { can-trx-en-gpio{ gpio-hog; @@ -167,6 +246,17 @@ status = "okay"; }; +&lvds0 { + status = "okay"; + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&lvds_receiver_in>; + }; + }; + }; +}; + &msiof0 { pinctrl-0 = <&msiof0_pins>; pinctrl-names = "default"; @@ -229,6 +319,11 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu0_to2"; + function = "tpu0"; + }; + can1_pins: can1 { groups = "can1_data_b"; function = "can1"; @@ -335,6 +430,10 @@ shared-pin; }; +&tpu { + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index af77ab20586d..4a148cf1defc 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -20,7 +20,7 @@ &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = <0 8 255>; + brightness-levels = <8 255>; num-interpolated-steps = <247>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f8b69e0a16a0..82fc6fba9999 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -39,7 +39,7 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index 069f0c2c1fdf..52a84cbe7a90 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -23,7 +23,7 @@ &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index 4a373f5aa600..0ae2bd150e37 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -231,6 +231,23 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio5>; + interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + &i2c5 { status = "okay"; }; @@ -241,10 +258,17 @@ gpio1830-supply = <&vcc_18>; gpio30-supply = <&vcc_io>; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_wl>; status = "okay"; }; &pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { drive-strength = <8>; }; @@ -260,6 +284,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus4: sdmmc-bus4 { rockchip,pins = @@ -291,6 +321,16 @@ }; }; +&sdio_pwrseq { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */ +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 26b53eac4706..da1d548b7330 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -15,6 +15,14 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -78,6 +86,19 @@ status = "okay"; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index a1a08cb9364e..e491964b1c3d 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -299,7 +299,7 @@ clock-names = "timer", "pclk"; }; - watchdog: wdt@10360000 { + watchdog: watchdog@10360000 { compatible = "snps,dw-wdt"; reg = <0x10360000 0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 47626ede6fdd..e7c379a9842e 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -10,7 +10,7 @@ / { model = "SMDK2416"; - compatible = "samsung,s3c2416"; + compatible = "samsung,smdk2416", "samsung,s3c2416"; memory@30000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index 69c9ec4cf381..581309e7f15e 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -17,7 +17,7 @@ / { model = "Samsung SMDK6410 board based on S3C6410"; - compatible = "samsung,mini6410", "samsung,s3c6410"; + compatible = "samsung,smdk6410", "samsung,s3c6410"; memory@50000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 8e57e5a1f0c5..6423348034b6 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -277,37 +277,37 @@ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_CONNECT>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <2>; linux,code = <KEY_BACK>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <2>; linux,code = <KEY_VOLUMEUP>; }; - key_5 { + key-5 { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_CAMERA>; }; - key_6 { + key-6 { keypad,row = <2>; keypad,column = <2>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 4da33d0f2748..160f8cd9a68d 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -54,7 +54,7 @@ clock-frequency = <32768>; }; - bt_codec: bt_sco { + bt_codec: bt-sco { compatible = "linux,bt-sco"; #sound-dai-cells = <0>; }; @@ -113,7 +113,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sound_i2c_pins>; - wm8994: wm8994@1a { + wm8994: audio-codec@1a { compatible = "wlf,wm8994"; reg = <0x1a>; @@ -589,7 +589,6 @@ io-channels = <&adc 9>; shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */ #io-channel-cells = <0>; - io-channel-ranges; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index ad8d5d2fa32d..5c1e12d39747 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -259,37 +259,37 @@ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_CONNECT>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <2>; linux,code = <KEY_BACK>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <2>; linux,code = <KEY_VOLUMEUP>; }; - key_5 { + key-5 { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_CAMERA>; }; - key_6 { + key-6 { keypad,row = <2>; keypad,column = <2>; linux,code = <KEY_VOLUMEDOWN>; @@ -353,7 +353,7 @@ samsung,i2c-slave-addr = <0x10>; status = "okay"; - tsp@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; interrupt-parent = <&gpj0>; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 7459e41e8ef1..fbae768d65e2 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -76,61 +76,61 @@ <&keypad_col6>, <&keypad_col7>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <3>; linux,code = <KEY_1>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <4>; linux,code = <KEY_2>; }; - key_3 { + key-3 { keypad,row = <0>; keypad,column = <5>; linux,code = <KEY_3>; }; - key_4 { + key-4 { keypad,row = <0>; keypad,column = <6>; linux,code = <KEY_4>; }; - key_5 { + key-5 { keypad,row = <0 >; keypad,column = <7>; linux,code = <KEY_5>; }; - key_6 { + key-6 { keypad,row = <1>; keypad,column = <3>; linux,code = <KEY_A>; }; - key_7 { + key-7 { keypad,row = <1>; keypad,column = <4>; linux,code = <KEY_B>; }; - key_8 { + key-8 { keypad,row = <1>; keypad,column = <5>; linux,code = <KEY_C>; }; - key_9 { + key-9 { keypad,row = <1>; keypad,column = <6>; linux,code = <KEY_D>; }; - key_10 { + key-10 { keypad,row = <1>; keypad,column = <7>; linux,code = <KEY_E>; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 2871351ab907..353ba7b09a0c 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -149,7 +149,6 @@ clocks = <&clocks CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2ddc85dff8ce..2c4952427296 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -656,6 +656,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>; #address-cells = <1>; #size-cells = <1>; + no-memory-wc; ranges = <0 0xf8044000 0x1420>; }; @@ -724,7 +725,7 @@ can0: can@f8054000 { compatible = "bosch,m_can"; - reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg = <0xf8054000 0x4000>, <0x210000 0x1c00>; reg-names = "m_can", "message_ram"; interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, <64 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1130,7 +1131,7 @@ can1: can@fc050000 { compatible = "bosch,m_can"; - reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg = <0xfc050000 0x4000>, <0x210000 0x3800>; reg-names = "m_can", "message_ram"; interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, <65 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1140,7 +1141,7 @@ assigned-clocks = <&pmc PMC_TYPE_GCK 57>; assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; - bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 86137f8d2b45..7c979652f330 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -305,9 +305,7 @@ }; adc0: adc@f8018000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91sam9x5-adc"; + compatible = "atmel,sama5d3-adc"; reg = <0xf8018000 0x100>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -333,30 +331,8 @@ atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; - atmel,adc-res = <10 12>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res-names = "lowres", "highres"; status = "disabled"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; i2c2: i2c@f801c000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 04f24cf752d3..05c55875835d 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -661,31 +661,9 @@ atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; - atmel,adc-res = <8 10>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res-names = "lowres", "highres"; atmel,adc-ts-pressure-threshold = <10000>; status = "disabled"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; aes@fc044000 { diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index aab5719cc1a9..4c16736ea789 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -326,13 +326,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi-controller@a0351000 { + dsi@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0352000 { + dsi@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0353000 { + dsi@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index 67bc69e67b33..c72aa250bf6f 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -261,13 +261,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi-controller@a0351000 { + dsi@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0352000 { + dsi@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0353000 { + dsi@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 05fd544b06c1..404b9c4a5fee 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1097,7 +1097,7 @@ ranges; status = "disabled"; - dsi0: dsi-controller@a0351000 { + dsi0: dsi@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; @@ -1105,7 +1105,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi1: dsi-controller@a0352000 { + dsi1: dsi@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; @@ -1113,7 +1113,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi2: dsi-controller@a0353000 { + dsi2: dsi@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; /* This DSI port only has the Low Power / Energy Save clock */ diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index b8fd8f18ba16..e32d0c36feb8 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -199,7 +199,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index de82b9db956f..e024520f4d47 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -66,7 +66,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index 9f285c7cf914..cb3677f0a1cb 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -45,7 +45,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "sony,acx424akp"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index a1093cb37dc7..496f9d3ba7b7 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -260,6 +260,11 @@ interrupt-parent = <&gpio6>; interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + /* VDDA is "analog supply", 2.57-3.47 V */ + vdda-supply = <&ab8500_ldo_aux2_reg>; + /* VDD is "digital supply" 1.71-3.47V */ + vdd-supply = <&ab8500_ldo_aux5_reg>; + pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; }; @@ -284,7 +289,6 @@ regulator-name = "vreg_tsp_a3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; /* FIXME */ }; ab8500_ldo_aux3 { @@ -301,7 +305,6 @@ regulator-name = "vreg_tsp_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; /* FIXME */ }; ab8500_ldo_aux6 { @@ -322,7 +325,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dsi_default_mode>; - dsi-controller@a0351000 { + dsi@a0351000 { panel@0 { compatible = "samsung,s6e63m0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 27722c42b61c..b50634c81b44 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -393,7 +393,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dsi_default_mode>; - dsi-controller@a0351000 { + dsi@a0351000 { panel { /* NT35510-based Hydis HVA40WV1 */ compatible = "hydis,hva40wv1", "novatek,nt35510"; @@ -433,6 +433,16 @@ }; }; + /* The unused FBCLK needs to be pulled down on this machine */ + sdi2 { + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_pd>; + }; + }; + }; + mcde { dsi_default_mode: dsi_default { default_mux1 { diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 67e7648de41e..7e10ae744c9d 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -188,6 +188,7 @@ port { dcmi_0: endpoint { remote-endpoint = <&ov2640_0>; + bus-type = <5>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 7febe19e780d..b083afd0ebd6 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -274,7 +274,7 @@ dmamux1: dma-router@40020800 { compatible = "st,stm32h7-dmamux"; - reg = <0x40020800 0x1c>; + reg = <0x40020800 0x40>; #dma-cells = <3>; dma-channels = <16>; dma-requests = <128>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index d84686e00370..20a59e8f7a33 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -349,6 +349,61 @@ }; }; + fmc_pins_b: fmc-1 { + pins { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */ + <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */ + <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */ + <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */ + <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */ + <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */ + <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */ + <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */ + <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */ + <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + fmc_sleep_pins_b: fmc-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */ + <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */ + <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */ + <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */ + <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */ + <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -1591,6 +1646,27 @@ }; }; + spi4_pins_a: spi4-0 { + pins { + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ + bias-disable; + }; + }; + + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = <STM32_PINMUX('I', 11, ANALOG)>; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1726,20 +1802,6 @@ }; }; - spi4_pins_a: spi4-0 { - pins { - pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ - <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ - bias-disable; - }; - }; - usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 84757901cd8d..3c75abacb374 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -362,8 +362,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x40009000 0x400>; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM1_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -999,7 +1001,7 @@ dmamux1: dma-router@48002000 { compatible = "st,stm32h7-dmamux"; - reg = <0x48002000 0x1c>; + reg = <0x48002000 0x40>; #dma-cells = <3>; dma-requests = <128>; dma-masters = <&dma1 &dma2>; @@ -1047,7 +1049,7 @@ sdmmc3: sdmmc@48004000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1068,9 +1070,9 @@ resets = <&rcc USBO_R>; reset-names = "dwc2"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <512>; g-np-tx-fifo-size = <32>; - g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; dr_mode = "otg"; usb33d-supply = <&usb33>; status = "disabled"; @@ -1098,7 +1100,7 @@ resets = <&rcc CAMITF_R>; clocks = <&rcc DCMI>; clock-names = "mclk"; - dmas = <&dmamux1 75 0x400 0x0d>; + dmas = <&dmamux1 75 0x400 0x01>; dma-names = "tx"; status = "disabled"; }; @@ -1156,8 +1158,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x50021000 0x400>; + interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM2_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1183,8 +1187,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x50022000 0x400>; + interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM3_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1203,8 +1209,10 @@ lptimer4: timer@50023000 { compatible = "st,stm32-lptimer"; reg = <0x50023000 0x400>; + interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM4_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1217,8 +1225,10 @@ lptimer5: timer@50024000 { compatible = "st,stm32-lptimer"; reg = <0x50024000 0x400>; + interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM5_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1284,7 +1294,7 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc HASH1>; resets = <&rcc HASH1_R>; - dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; + dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>; dma-names = "in"; dma-maxburst = <2>; status = "disabled"; @@ -1348,8 +1358,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>, - <&mdma1 22 0x10 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, + <&mdma1 22 0x2 0x100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; @@ -1360,7 +1370,7 @@ sdmmc1: sdmmc@58005000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1375,7 +1385,7 @@ sdmmc2: sdmmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1426,7 +1436,7 @@ status = "disabled"; }; - usbh_ohci: usbh-ohci@5800c000 { + usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; clocks = <&rcc USBH>; @@ -1435,7 +1445,7 @@ status = "disabled"; }; - usbh_ehci: usbh-ehci@5800d000 { + usbh_ehci: usb@5800d000 { compatible = "generic-ehci"; reg = <0x5800d000 0x1000>; clocks = <&rcc USBH>; @@ -1563,6 +1573,11 @@ status = "disabled"; }; + tamp: tamp@5c00a000 { + compatible = "st,stm32-tamp", "syscon", "simple-mfd"; + reg = <0x5c00a000 0x400>; + }; + /* * Break node order to solve dependency probe issue between * pinctrl and exti. @@ -1739,6 +1754,8 @@ st,syscfg-holdboot = <&rcc 0x10C 0x1>; st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts new file mode 100644 index 000000000000..cfb8f8a0c82d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP157C-C065-R102-F0819-SPI-E-CAN2-SD-RTC-T-DSI-I-01D2 + * DHCOM PCB number: 587-200 or newer + * PicoITX PCB number: 487-600 or newer + */ +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-picoitx.dtsi" + +/ { + model = "DH electronics STM32MP157C DHCOM PicoITX"; + compatible = "dh,stm32mp157c-dhcom-picoitx", "dh,stm32mp157c-dhcom-som", + "st,stm32mp157"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 045636555ddd..2bc92ef3aeb9 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -29,6 +29,10 @@ }; }; +&cryp1 { + status = "okay"; +}; + &dsi { status = "okay"; phy-dsi-supply = <®18>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 2e77ccec3fc1..81a7d5849db4 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -115,6 +115,14 @@ }; }; +&crc1 { + status = "okay"; +}; + +&cryp1 { + status = "okay"; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; @@ -136,6 +144,10 @@ contiguous-area = <&gpu_reserved>; }; +&hash1 { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index a55e80ce2602..5c5b1ddf7bfd 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -90,6 +90,7 @@ port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; + bus-type = <5>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 1e5333fd437f..cda8e871f999 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -15,7 +15,7 @@ / { model = "Linux Automation MC-1 board"; - compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157"; + compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157"; aliases { ethernet0 = ðernet0; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi new file mode 100644 index 000000000000..356150d28c42 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + label = "yellow:led"; + gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&adc { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&gpioa { + /* + * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable + * port power. This signal should be handled by USB power sequencing + * in order to turn on port power when USB bus is powered up, but so + * far there is no such functionality. + */ + usb-port-power { + gpio-hog; + gpios = <13 GPIO_ACTIVE_LOW>; + output-low; + line-name = "usb-port-power"; + }; +}; + +&gpioc { + gpio-line-names = "", "", "", "", + "", "", "In1", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "Out1", + "Out2", "", "", ""; +}; + +&gpiog { + gpio-line-names = "In2", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c2 { /* On board-to-board connector (optional) */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { /* On board-to-board connector */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index f796a6150313..ac46ab363e1b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -11,6 +11,7 @@ / { aliases { ethernet0 = ðernet0; + ethernet1 = &ksz8851; }; memory@c0000000 { @@ -127,10 +128,46 @@ phy0: ethernet-phy@1 { reg = <1>; + interrupt-parent = <&gpioi>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ks8851mll@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioc { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 93398cfae97e..89c0e1ddc387 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -124,6 +124,10 @@ status = "okay"; }; +&crc1 { + status = "okay"; +}; + &dts { status = "okay"; }; @@ -151,6 +155,10 @@ contiguous-area = <&gpu_reserved>; }; +&hash1 { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; @@ -238,6 +246,30 @@ /delete-property/dmas; /delete-property/dma-names; + stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + status = "okay"; + vdd-supply = <&vin>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + typec-power-opmode = "default"; + + port { + con_usbotg_hs_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; @@ -648,6 +680,12 @@ phy-names = "usb2-phy"; usb-role-switch; status = "okay"; + + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usbotg_hs_ep>; + }; + }; }; &usbphyc { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..e76d56a3df9c 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -136,6 +136,70 @@ }; +&pio { + gpio-line-names = + /* PA */ + "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", + "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", + "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", + "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", + "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", + "CON2-P40", "CON2-P38", "", "", + "", "", "", "", "", "", "", "", + + /* PB */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PC */ + "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", + "CON2-P18", "", "", "CON2-P26", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "CSI-PWR-EN", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PE */ + "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", + "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", + "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", + "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "SDC0-DET", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PG */ + "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", + "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", + "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", + "BT-RST-N", "AP-WAKE-BT", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", + "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", + "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts new file mode 100644 index 000000000000..204a39f93f4e --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com> + * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com> + * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com> +*/ + +#include "sun8i-h3-nanopi.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "FriendlyARM NanoPi R1"; + compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart1; + ethernet0 = &emac; + ethernet1 = &wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; + + reg_vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + + leds { + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + led-3 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */ + }; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + wifi: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts new file mode 100644 index 000000000000..7d3e7323b661 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyARM ZeroPi"; + compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi new file mode 100644 index 000000000000..24d507cdbcf9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Elimo Impetus SoM"; + compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts new file mode 100644 index 000000000000..039677c2cc65 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io> + */ + +/dts-v1/; +#include "sun8i-s3-elimo-impetus.dtsi" + +/ { + model = "Elimo Initium"; + compatible = "elimo,initium", "elimo,impetus", "sochip,s3", + "allwinner,sun8i-v3"; + + aliases { + serial1 = &uart1; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index ca4672ed2e02..c279e13583ba 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -24,4 +24,9 @@ &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 89abd4cc7e23..f8f19d8fa795 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -348,6 +348,12 @@ }; /omit-if-no-ref/ + i2c1_pb_pins: i2c1-pb-pins { + pins = "PB8", "PB9"; + function = "i2c1"; + }; + + /omit-if-no-ref/ i2c1_pe_pins: i2c1-pe-pins { pins = "PE21", "PE22"; function = "i2c1"; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 22d533d18992..9be13378d4df 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -662,6 +662,19 @@ status = "disabled"; }; + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + dmas = <&dma 27>; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "tx"; + status = "disabled"; + }; + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi index 32401457ae71..a7ac805eeed5 100644 --- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -1465,3 +1465,11 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi index 861d3f22116b..df4e463afbd1 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -2420,3 +2420,11 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index c91647d13a50..a0f56cc9da5c 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -6649,3 +6649,13 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@924000000,1100; + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@924000000; + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi index d2beea0bd15f..35c98734d35f 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -2048,3 +2048,13 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@924000000,1100; + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@924000000; + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi new file mode 100644 index 000000000000..49d9420a3289 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@12750000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0003>; + }; + + opp@12750000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0008>; + }; + + opp@12750000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0010>; + }; + + opp@12750000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0004>; + }; + + opp@20400000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0003>; + }; + + opp@20400000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0008>; + }; + + opp@20400000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0010>; + }; + + opp@20400000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0004>; + }; + + opp@40800000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + }; + + opp@40800000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0008>; + }; + + opp@40800000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0010>; + }; + + opp@40800000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0004>; + }; + + opp@68000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + }; + + opp@68000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0008>; + }; + + opp@68000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0010>; + }; + + opp@68000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0004>; + }; + + opp@102000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + }; + + opp@102000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0008>; + }; + + opp@102000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0010>; + }; + + opp@102000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0004>; + }; + + opp@204000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0003>; + }; + + opp@204000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0008>; + }; + + opp@204000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0010>; + }; + + opp@204000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0004>; + }; + + opp@264000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0003>; + }; + + opp@264000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0008>; + }; + + opp@264000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0010>; + }; + + opp@264000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0004>; + }; + + opp@300000000,850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0003>; + }; + + opp@300000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0008>; + }; + + opp@300000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0010>; + }; + + opp@300000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0004>; + }; + + opp@348000000,850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0003>; + }; + + opp@348000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0008>; + }; + + opp@348000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0010>; + }; + + opp@348000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0004>; + }; + + opp@396000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0008>; + }; + + opp@396000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0003>; + }; + + opp@396000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0010>; + }; + + opp@396000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0004>; + }; + + opp@528000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0008>; + }; + + opp@528000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0003>; + }; + + opp@528000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0010>; + }; + + opp@528000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0004>; + }; + + opp@600000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0008>; + }; + + opp@600000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0003>; + }; + + opp@600000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0010>; + }; + + opp@600000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + }; + + opp@792000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x000B>; + }; + + opp@792000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x0010>; + }; + + opp@792000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x0004>; + }; + + opp@924000000,1100 { + opp-microvolt = <1100000 1100000 1150000>; + opp-hz = /bits/ 64 <924000000>; + opp-supported-hw = <0x0013>; + }; + + opp@1200000000,1100 { + opp-microvolt = <1100000 1100000 1150000>; + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x0003>; + }; + }; + + emc_bw_dfs_opp_table: emc-bandwidth-opp-table { + compatible = "operating-points-v2"; + + opp@12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <204000>; + }; + + opp@20400000 { + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <326400>; + }; + + opp@40800000 { + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <652800>; + }; + + opp@68000000 { + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <1088000>; + }; + + opp@102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <1632000>; + }; + + opp@204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <3264000>; + }; + + opp@264000000 { + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <4224000>; + }; + + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <4800000>; + }; + + opp@348000000 { + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <5568000>; + }; + + opp@396000000 { + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <6336000>; + }; + + opp@528000000 { + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <8448000>; + }; + + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <9600000>; + }; + + opp@792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <12672000>; + }; + + opp@924000000 { + opp-hz = /bits/ 64 <924000000>; + opp-supported-hw = <0x0013>; + opp-peak-kBps = <14784000>; + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <19200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 64f488ba1e72..0b678afb2a5c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/thermal/tegra124-soctherm.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra124-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra124"; interrupt-parent = <&lic>; @@ -113,6 +115,19 @@ iommus = <&mc TEGRA_SWGROUP_DC>; nvidia,head = <0>; + + interconnects = <&mc TEGRA124_MC_DISPLAY0A &emc>, + <&mc TEGRA124_MC_DISPLAY0B &emc>, + <&mc TEGRA124_MC_DISPLAY0C &emc>, + <&mc TEGRA124_MC_DISPLAYHC &emc>, + <&mc TEGRA124_MC_DISPLAYD &emc>, + <&mc TEGRA124_MC_DISPLAYT &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor", + "wind", + "wint"; }; dc@54240000 { @@ -127,6 +142,15 @@ iommus = <&mc TEGRA_SWGROUP_DCB>; nvidia,head = <1>; + + interconnects = <&mc TEGRA124_MC_DISPLAY0AB &emc>, + <&mc TEGRA124_MC_DISPLAY0BB &emc>, + <&mc TEGRA124_MC_DISPLAY0CB &emc>, + <&mc TEGRA124_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; }; hdmi: hdmi@54280000 { @@ -268,6 +292,9 @@ clock-names = "actmon", "emc"; resets = <&tegra_car 119>; reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA124_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; }; gpio: gpio@6000d000 { @@ -628,6 +655,7 @@ #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; emc: external-memory-controller@7001b000 { @@ -637,6 +665,9 @@ clock-names = "emc"; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; }; sata@70020000 { @@ -650,9 +681,9 @@ <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; - reset-names = "sata", "sata-oob", "sata-cold"; + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; status = "disabled"; }; @@ -898,9 +929,11 @@ reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; + <&tegra_car TEGRA124_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; resets = <&tegra_car 78>; reset-names = "soctherm"; @@ -910,6 +943,7 @@ throttle_heavy: heavy { nvidia,priority = <100>; nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; #cooling-cells = <2>; }; @@ -1247,6 +1281,11 @@ hysteresis = <0>; type = "critical"; }; + mem-throttle-trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { @@ -1298,6 +1337,11 @@ hysteresis = <0>; type = "critical"; }; + pllx-throttle-trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 10794a870776..d3b99535d755 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -512,6 +512,16 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; + + embedded-controller@58 { + compatible = "acer,a500-iconia-ec", "ene,kb930"; + reg = <0x58>; + + system-power-controller; + + monitored-battery = <&bat1010>; + power-supplies = <&mains>; + }; }; }; @@ -794,6 +804,13 @@ default-brightness-level = <20>; }; + bat1010: battery-2s1p { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3260000>; + energy-full-design-microwatt-hours = <24000000>; + operating-range-celsius = <0 40>; + }; + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ clk32k_in: clock@0 { compatible = "fixed-clock"; @@ -907,6 +924,7 @@ compatible = "ti,sn75lvds83", "lvds-encoder"; powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; ports { #address-cells = <1>; @@ -1020,14 +1038,14 @@ }; thermal-zones { - nct1008-local { + skin-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <0>; /* milliseconds */ thermal-sensors = <&nct1008 0>; }; - nct1008-remote { + cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -1450,3 +1468,8 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@666000000; + /delete-node/ opp@760000000; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 6162d193e12c..585a5b441cf6 100644 --- a/arch/arm/boot/dts/tegra20-colibri.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -742,6 +742,10 @@ }; }; +&emc_icc_dvfs_opp_table { + /delete-node/ opp@760000000; +}; + &gpio { lan-reset-n { gpio-hog; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ada2bed8b1b5..7e49112cd9a1 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -662,3 +662,7 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@760000000; +}; diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi new file mode 100644 index 000000000000..b84afecea154 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@36000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <36000000>; + opp-supported-hw = <0x000F>; + }; + + opp@47500000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <47500000>; + opp-supported-hw = <0x000F>; + }; + + opp@50000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <50000000>; + opp-supported-hw = <0x000F>; + }; + + opp@54000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x000F>; + }; + + opp@57000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <57000000>; + opp-supported-hw = <0x000F>; + }; + + opp@100000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + }; + + opp@108000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x000F>; + }; + + opp@126666000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <126666000>; + opp-supported-hw = <0x000F>; + }; + + opp@150000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <150000000>; + opp-supported-hw = <0x000F>; + }; + + opp@190000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x000F>; + }; + + opp@216000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x000F>; + }; + + opp@300000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000F>; + }; + + opp@333000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <333000000>; + opp-supported-hw = <0x000F>; + }; + + opp@380000000 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x000F>; + }; + + opp@600000000 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x000F>; + }; + + opp@666000000 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <666000000>; + opp-supported-hw = <0x000F>; + }; + + opp@760000000 { + opp-microvolt = <1300000 1300000 1300000>; + opp-hz = /bits/ 64 <760000000>; + opp-supported-hw = <0x000F>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index b158771ac0b7..055334ae3d28 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -592,6 +593,16 @@ #clock-cells = <0>; }; + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 72a4211a618f..6ce498178105 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra20-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; @@ -111,6 +113,17 @@ nvidia,head = <0>; + interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>, + <&mc TEGRA20_MC_DISPLAY0B &emc>, + <&mc TEGRA20_MC_DISPLAY1B &emc>, + <&mc TEGRA20_MC_DISPLAY0C &emc>, + <&mc TEGRA20_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -128,6 +141,17 @@ nvidia,head = <1>; + interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>, + <&mc TEGRA20_MC_DISPLAY0BB &emc>, + <&mc TEGRA20_MC_DISPLAY1BB &emc>, + <&mc TEGRA20_MC_DISPLAY0CB &emc>, + <&mc TEGRA20_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -630,15 +654,20 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; #iommu-cells = <0>; + #interconnect-cells = <1>; }; - memory-controller@7000f400 { + emc: memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x200>; + reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA20_CLK_EMC>; #address-cells = <1>; #size-cells = <0>; + #interconnect-cells = <0>; + + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + nvidia,memory-controller = <&mc>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 88ca03f57b3b..ac1c1a63eb0e 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -75,7 +75,7 @@ }; gpio@6000d000 { - init-mode { + init-mode-hog { gpio-hog; gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>, @@ -83,7 +83,7 @@ output-low; }; - init-low-power-mode { + init-low-power-mode-hog { gpio-hog; gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; input; @@ -1073,8 +1073,16 @@ }; display-panel { - compatible = "hydis,hv070wx2-1e0", "chunghwa,claa070wp03xg", - "panel-lvds"; + /* + * Nexus 7 supports two compatible panel models: + * + * 1. hydis,hv070wx2-1e0 + * 2. chunghwa,claa070wp03xg + * + * We want to use timing which is optimized for Nexus 7, + * hence we need to customize the timing. + */ + compatible = "panel-lvds"; power-supply = <&vdd_pnl>; backlight = <&backlight>; @@ -1145,6 +1153,7 @@ compatible = "ti,sn75lvds83", "lvds-encoder"; powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; ports { #address-cells = <1>; @@ -1240,14 +1249,14 @@ }; thermal-zones { - nct72-local { + skin-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <0>; /* milliseconds */ thermal-sensors = <&nct72 0>; }; - nct72-remote { + cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -1255,9 +1264,9 @@ trips { trip0: cpu-alert0 { - /* start throttling at 50C */ - temperature = <50000>; - hysteresis = <3000>; + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; type = "passive"; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi index b25b3fa90ac6..17b6682ffce8 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi @@ -29,7 +29,7 @@ }; }; - cpu-pwr-req { + cpu-pwr-req-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi index bc0f6f29b956..bcff0997ee51 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi @@ -1563,3 +1563,15 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@750000000,1300; + /delete-node/ opp@800000000,1300; + /delete-node/ opp@900000000,1350; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@750000000; + /delete-node/ opp@800000000; + /delete-node/ opp@900000000; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi index e3da89f1941a..a681ad51fddd 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi @@ -23,7 +23,7 @@ }; gpio@6000d000 { - init-mode-3g { + init-mode-3g-hog { gpio-hog; gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>, diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts new file mode 100644 index 000000000000..74da1360d297 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -0,0 +1,4519 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + model = "Ouya Game Console"; + compatible = "ouya,ouya", "nvidia,tegra30"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* WiFi */ + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + serial0 = &uartd; /* Debug Port */ + serial1 = &uartc; /* Bluetooth */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + + ramoops@bfdf0000 { + compatible = "ramoops"; + reg = <0xbfdf0000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + trustzone@bfe00000 { + reg = <0xbfe00000 0x200000>; + no-map; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + vdd-supply = <&vdd_vid_reg>; + pll-supply = <&ldo7_reg>; + hdmi-supply = <&sys_3v3_reg>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio: gpio@6000d000 { + gpio-ranges = <&pinmux 0 0 248>; + #reset-cells = <1>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + state_default: pinmux { + /* located at $state_default below */ + }; + }; + + uartc: serial@70006200 { + status = "okay"; + compatible = "nvidia,tegra30-hsuart"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + /* Azurewave AW-NH660 BCM4330B1 */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + vbat-supply = <&sys_3v3_reg>; + vddio-supply = <&vdd_1v8>; + + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + uartd: serial@70006300 { + status = "okay"; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + cpu_temp: nct1008@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; + #thermal-sensor-cells = <1>; +/* + * The interrupt is bugged, once triggered it never clears. + * interrupt-parent = <&gpio>; + * interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; + */ + }; + + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_reg>; + vcc2-supply = <&vdd_5v0_reg>; + vcc3-supply = <&vdd_1v8>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_5v0_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_5v0_reg>; + vccio-supply = <&vdd_5v0_reg>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1270000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + vdd_core: tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-vout-discharge; + + nvidia,tegra-core-regulator; + }; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + mc_timings: memory-controller@7000f000 { + /* timings located at &mc_timings below */ + }; + + emc_timings: memory-controller@7000f400 { + /* timings located at &emc_timings below */ + }; + + hda@70030000 { + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + sdmmc3: mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; + keep-power-in-suspend; + + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <&sdmmc_3v3_reg>; + vqmmc-supply = <&vdd_1v8>; + + /* Azurewave AW-NH660 BCM4330 */ + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + + sdmmc4: mmc@78000600 { + status = "okay"; + + keep-power-in-suspend; + bus-width = <8>; + non-removable; + vmmc-supply = <&sys_3v3_reg>; + vqmmc-supply = <&vdd_1v8>; + nvidia,default-tap = <0x0F>; + max-frequency = <25500000>; + }; + + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@7d004000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + smsc@2 { /* SMSC 10/100T Ethernet Controller */ + compatible = "usb424,9e00"; + reg = <2>; + local-mac-address = [00 11 22 33 44 55]; + }; + }; + + usb-phy@7d004000 { + vbus-supply = <&vdd_smsc>; + status = "okay"; + }; + + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; + }; + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + + cpu@2 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + + cpu@3 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <0x0>; + tlm,version-minor = <0x0>; + }; + }; + + fan: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 4500 1>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <5000>; + polling-delay-passive = <5000>; + + thermal-sensors = <&cpu_temp 1>; + + trips { + cpu_alert0: cpu-alert0 { + temperature = <50000>; + hysteresis = <10000>; + type = "active"; + }; + cpu_alert1: cpu-alert1 { + temperature = <70000>; + hysteresis = <5000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + vdd_12v_in: vdd_12v_in { + compatible = "regulator-fixed"; + regulator-name = "vdd_12v_in"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + sdmmc_3v3_reg: sdmmc_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "sdmmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: vdd_fuse_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + regulator-always-on; + }; + + vdd_vid_reg: vdd_vid_reg { + compatible = "regulator-fixed"; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_reg>; + regulator-boot-on; + }; + + ddr_reg: ddr_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + sys_3v3_reg: sys_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + vdd_5v0_reg: vdd_5v0_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + vdd_smsc: vdd_smsc { + compatible = "regulator-fixed"; + regulator-name = "vdd_smsc"; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>; + }; + + usb3_vbus_reg: usb3_vbus_reg { + compatible = "regulator-fixed"; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_reg>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + + leds { + compatible = "gpio-leds"; + + led-power { + label = "power-led"; + gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + retain-state-suspended; + }; + }; +}; +&mc_timings { + emc-timings-0 { + nvidia,ram-code = <0>; /* Samsung RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74630303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix M RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74630303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + emc-timings-2 { + nvidia,ram-code = <2>; /* Hynix A RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75e30303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74e30303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x74430504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x74040a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; +}; +&emc_timings { + emc-timings-0 { + nvidia,ram-code = <0>; /* Samsung RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000006 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000007 /* EMC_TXSR */ + 0x00000007 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000d /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000e /* EMC_TXSR */ + 0x0000000e /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000066 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS4 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS5 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS6 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0158000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ce /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000800a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix M RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000006 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000007 /* EMC_TXSR */ + 0x00000007 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000d /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000e /* EMC_TXSR */ + 0x0000000e /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000066 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS4 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS5 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS6 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0158000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ce /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000800a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + emc-timings-2 { + nvidia,ram-code = <2>; /* Hynix A RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000007 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000008 /* EMC_TXSR */ + 0x00000008 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000f /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000010 /* EMC_TXSR */ + 0x00000010 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001e /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000020 /* EMC_TXSR */ + 0x00000020 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x0000003d /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000040 /* EMC_TXSR */ + 0x00000040 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000076 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000007c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00044000 /* EMC_DLL_XFORM_DQS0 */ + 0x00044000 /* EMC_DLL_XFORM_DQS1 */ + 0x00044000 /* EMC_DLL_XFORM_DQS2 */ + 0x00044000 /* EMC_DLL_XFORM_DQS3 */ + 0x00044000 /* EMC_DLL_XFORM_DQS4 */ + 0x00044000 /* EMC_DLL_XFORM_DQS5 */ + 0x00044000 /* EMC_DLL_XFORM_DQS6 */ + 0x00044000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00058000 /* EMC_DLL_XFORM_DQ0 */ + 0x00058000 /* EMC_DLL_XFORM_DQ1 */ + 0x00058000 /* EMC_DLL_XFORM_DQ2 */ + 0x00058000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0148000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ee /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000f8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000c /* EMC_DLL_XFORM_DQS0 */ + 0x007fc00a /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000c /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0a000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00d0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; +}; +&state_default { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a18_pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pclk_pb3 { + nvidia,pins = "lcd_pclk_pb3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr1_pc1 { + nvidia,pins = "lcd_pwr1_pc1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat5_pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat4_pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat7_pd4 { + nvidia,pins = "sdmmc3_dat7_pd4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d1_pd5 { + nvidia,pins = "vi_d1_pd5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_vsync_pd6 { + nvidia,pins = "vi_vsync_pd6"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_hsync_pd7 { + nvidia,pins = "vi_hsync_pd7"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d0_pe0 { + nvidia,pins = "lcd_d0_pe0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d1_pe1 { + nvidia,pins = "lcd_d1_pe1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d2_pe2 { + nvidia,pins = "lcd_d2_pe2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d3_pe3 { + nvidia,pins = "lcd_d3_pe3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d4_pe4 { + nvidia,pins = "lcd_d4_pe4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d5_pe5 { + nvidia,pins = "lcd_d5_pe5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d6_pe6 { + nvidia,pins = "lcd_d6_pe6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d7_pe7 { + nvidia,pins = "lcd_d7_pe7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d8_pf0 { + nvidia,pins = "lcd_d8_pf0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d9_pf1 { + nvidia,pins = "lcd_d9_pf1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d10_pf2 { + nvidia,pins = "lcd_d10_pf2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d11_pf3 { + nvidia,pins = "lcd_d11_pf3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d12_pf4 { + nvidia,pins = "lcd_d12_pf4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d13_pf5 { + nvidia,pins = "lcd_d13_pf5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d14_pf6 { + nvidia,pins = "lcd_d14_pf6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d15_pf7 { + nvidia,pins = "lcd_d15_pf7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad1_pg1 { + nvidia,pins = "gmi_ad1_pg1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad3_pg3 { + nvidia,pins = "gmi_ad3_pg3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad4_pg4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad7_pg7 { + nvidia,pins = "gmi_ad7_pg7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad8_ph0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wr_n_pi0 { + nvidia,pins = "gmi_wr_n_pi0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_oe_n_pi1 { + nvidia,pins = "gmi_oe_n_pi1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_dqs_pi2 { + nvidia,pins = "gmi_dqs_pi2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs7_n_pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wait_pi7 { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_de_pj1 { + nvidia,pins = "lcd_de_pj1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_hsync_pj3 { + nvidia,pins = "lcd_hsync_pj3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_vsync_pj4 { + nvidia,pins = "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_clk_pk1 { + nvidia,pins = "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs2_n_pk3 { + nvidia,pins = "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d2_pl0 { + nvidia,pins = "vi_d2_pl0"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d3_pl1 { + nvidia,pins = "vi_d3_pl1"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d4_pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d5_pl3 { + nvidia,pins = "vi_d5_pl3"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d6_pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d7_pl5 { + nvidia,pins = "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d8_pl6 { + nvidia,pins = "vi_d8_pl6"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d9_pl7 { + nvidia,pins = "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d16_pm0 { + nvidia,pins = "lcd_d16_pm0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d17_pm1 { + nvidia,pins = "lcd_d17_pm1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d18_pm2 { + nvidia,pins = "lcd_d18_pm2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d19_pm3 { + nvidia,pins = "lcd_d19_pm3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d20_pm4 { + nvidia,pins = "lcd_d20_pm4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d21_pm5 { + nvidia,pins = "lcd_d21_pm5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d22_pm6 { + nvidia,pins = "lcd_d22_pm6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d23_pm7 { + nvidia,pins = "lcd_d23_pm7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_cs0_n_pn4 { + nvidia,pins = "lcd_cs0_n_pn4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sdout_pn5 { + nvidia,pins = "lcd_sdout_pn5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_dc0_pn6 { + nvidia,pins = "lcd_dc0_pn6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_pclk_pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_mclk_pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d10_pt2 { + nvidia,pins = "vi_d10_pt2"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d11_pt3 { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d0_pt4 { + nvidia,pins = "vi_d0_pt4"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck_pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "clk_12m_out"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + crt_vsync_pv7 { + nvidia,pins = "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_cs1_n_pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_sck_px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_n_px6 { + nvidia,pins = "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sdin_pz2 { + nvidia,pins = "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_wr_n_pz3 { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_rst_n_pcc3 { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_rst_n_pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_clkreq_n_pcc7 { + nvidia,pins = "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_prsnt_n_pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_prsnt_n_pdd4 { + nvidia,pins = "pex_l1_prsnt_n_pdd4"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_prsnt_n_pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + drive_groups { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + }; +}; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@900000000,1350; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@900000000; +}; diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi new file mode 100644 index 000000000000..cbe84d25e726 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@12750000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0006>; + }; + + opp@12750000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0001>; + }; + + opp@12750000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0008>; + }; + + opp@25500000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0006>; + }; + + opp@25500000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0001>; + }; + + opp@25500000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0008>; + }; + + opp@27000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0006>; + }; + + opp@27000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0001>; + }; + + opp@27000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0008>; + }; + + opp@51000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0006>; + }; + + opp@51000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0001>; + }; + + opp@51000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0008>; + }; + + opp@54000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0006>; + }; + + opp@54000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0001>; + }; + + opp@54000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0008>; + }; + + opp@102000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0006>; + }; + + opp@102000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0001>; + }; + + opp@102000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0008>; + }; + + opp@108000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x0007>; + }; + + opp@108000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x0008>; + }; + + opp@204000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + }; + + opp@204000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0008>; + }; + + opp@333500000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0006>; + }; + + opp@333500000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0001>; + }; + + opp@333500000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0008>; + }; + + opp@375000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0006>; + }; + + opp@375000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0001>; + }; + + opp@375000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0008>; + }; + + opp@400000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0006>; + }; + + opp@400000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0001>; + }; + + opp@400000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0008>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0007>; + }; + + opp@416000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0008>; + }; + + opp@450000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x0007>; + }; + + opp@450000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x0008>; + }; + + opp@533000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x0007>; + }; + + opp@533000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x0008>; + }; + + opp@625000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x0006>; + }; + + opp@625000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x0008>; + }; + + opp@667000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x0006>; + }; + + opp@750000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <750000000>; + opp-supported-hw = <0x0004>; + }; + + opp@800000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0004>; + }; + + opp@900000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x0004>; + }; + }; + + emc_bw_dfs_opp_table: emc-bandwidth-opp-table { + compatible = "operating-points-v2"; + + opp@12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <102000>; + }; + + opp@25500000 { + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <204000>; + }; + + opp@27000000 { + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <216000>; + }; + + opp@51000000 { + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <408000>; + }; + + opp@54000000 { + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <432000>; + }; + + opp@102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <816000>; + }; + + opp@108000000 { + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <864000>; + }; + + opp@204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <1632000>; + }; + + opp@333500000 { + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2668000>; + }; + + opp@375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3000000>; + }; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3200000>; + }; + + opp@416000000 { + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3328000>; + }; + + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3600000>; + }; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <4264000>; + }; + + opp@625000000 { + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x000E>; + opp-peak-kBps = <5000000>; + }; + + opp@667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x0006>; + opp-peak-kBps = <5336000>; + }; + + opp@750000000 { + opp-hz = /bits/ 64 <750000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <6000000>; + }; + + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <6400000>; + }; + + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <7200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index aeae8c092d41..44a6dbba7081 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra30-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; @@ -210,6 +212,17 @@ nvidia,head = <0>; + interconnects = <&mc TEGRA30_MC_DISPLAY0A &emc>, + <&mc TEGRA30_MC_DISPLAY0B &emc>, + <&mc TEGRA30_MC_DISPLAY1B &emc>, + <&mc TEGRA30_MC_DISPLAY0C &emc>, + <&mc TEGRA30_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -229,6 +242,17 @@ nvidia,head = <1>; + interconnects = <&mc TEGRA30_MC_DISPLAY0AB &emc>, + <&mc TEGRA30_MC_DISPLAY0BB &emc>, + <&mc TEGRA30_MC_DISPLAY1BB &emc>, + <&mc TEGRA30_MC_DISPLAY0CB &emc>, + <&mc TEGRA30_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -395,6 +419,9 @@ clock-names = "actmon", "emc"; resets = <&tegra_car TEGRA30_CLK_ACTMON>; reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; }; gpio: gpio@6000d000 { @@ -748,15 +775,19 @@ #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; - memory-controller@7000f400 { + emc: memory-controller@7000f400 { compatible = "nvidia,tegra30-emc"; reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_EMC>; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 2259d11af721..d53f9c9db8bf 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -95,7 +95,7 @@ status = "disabled"; }; - can0: flexcan@40020000 { + can0: can@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; @@ -293,7 +293,7 @@ status = "disabled"; }; - wdoga5: wdog@4003e000 { + wdoga5: watchdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; @@ -681,7 +681,7 @@ status = "disabled"; }; - can1: flexcan@400d4000 { + can1: can@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index db3899b07992..df9ad831cf05 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -92,7 +92,7 @@ }; }; - amba: amba { + amba: axi { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 27cd6cb52f1b..cf70aff26c66 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -49,7 +49,7 @@ leds { compatible = "gpio-leds"; - ds23 { + led-ds23 { label = "ds23"; gpios = <&gpio0 10 0>; linux,default-trigger = "heartbeat"; @@ -66,6 +66,12 @@ ocm: sram@fffc0000 { compatible = "mmio-sram"; reg = <0xfffc0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffc0000 0x10000>; + ocm-sram@0 { + reg = <0x0 0x10000>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts index b7f65862c022..56732e8f6ca1 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC770 XM013 board DTS + * Xilinx ZC770 XM011 board DTS * * Copyright (C) 2013-2018 Xilinx, Inc. */ diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts index 4ae2c85df3a0..38d96adc870c 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -63,13 +63,12 @@ num-cs = <4>; is-decoded-cs = <0>; eeprom: eeprom@2 { - at25,byte-len = <8192>; - at25,addr-mode = <2>; - at25,page-size = <32>; - compatible = "atmel,at25"; reg = <2>; spi-max-frequency = <1000000>; + size = <8192>; + address-width = <16>; + pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi new file mode 100644 index 000000000000..bf5d1c4568b0 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> + * Copyright (C) 2017 Alexander Graf <agraf@suse.de> + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + wakeup-source; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zturn-v5.dts b/arch/arm/boot/dts/zynq-zturn-v5.dts new file mode 100644 index 000000000000..536632a09a25 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn-v5.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +/include/ "zynq-zturn-common.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board V5"; + compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000"; +}; + +&gem0 { + ethernet_phy: ethernet-phy@0 { + reg = <0x3>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts index 5ec616ebca08..620b24a25e06 100644 --- a/arch/arm/boot/dts/zynq-zturn.dts +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -1,114 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> - * Copyright (C) 2017 Alexander Graf <agraf@suse.de> - * - * Based on zynq-zed.dts which is: - * Copyright (C) 2011 - 2014 Xilinx - * Copyright (C) 2012 National Instruments Corp. - * - */ /dts-v1/; -/include/ "zynq-7000.dtsi" +/include/ "zynq-zturn-common.dtsi" / { model = "Zynq Z-Turn MYIR Board"; compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; - - aliases { - ethernet0 = &gem0; - serial0 = &uart1; - serial1 = &uart0; - mmc0 = &sdhci0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x40000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-leds { - compatible = "gpio-leds"; - usr-led1 { - label = "usr-led1"; - gpios = <&gpio0 0x0 0x1>; - default-state = "off"; - }; - - usr-led2 { - label = "usr-led2"; - gpios = <&gpio0 0x9 0x1>; - default-state = "off"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - K1 { - label = "K1"; - gpios = <&gpio0 0x32 0x1>; - linux,code = <0x66>; - wakeup-source; - autorepeat; - }; - }; -}; - -&clkc { - ps-clk-frequency = <33333333>; }; &gem0 { - status = "okay"; - phy-mode = "rgmii-id"; - phy-handle = <ðernet_phy>; - ethernet_phy: ethernet-phy@0 { reg = <0x0>; }; }; - -&sdhci0 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; - -&can0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - stlm75@49 { - status = "okay"; - compatible = "lm75"; - reg = <0x49>; - }; - - accelerometer@53 { - compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; - reg = <0x53>; - interrupt-parent = <&intc>; - interrupts = <0x0 0x1e 0x4>; - }; -}; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 357b78a5c11b..7b87e10d3953 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -25,7 +25,7 @@ gpio-leds { compatible = "gpio-leds"; - ld4 { + led-ld4 { label = "zynq-zybo-z7:green:ld4"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c index 81a4cbcab206..274c4f0df270 100644 --- a/arch/arm/mach-mstar/mstarv7.c +++ b/arch/arm/mach-mstar/mstarv7.c @@ -31,10 +31,18 @@ #define MSTARV7_L3BRIDGE_FLUSH_TRIGGER BIT(0) #define MSTARV7_L3BRIDGE_STATUS_DONE BIT(12) +#ifdef CONFIG_SMP +#define MSTARV7_CPU1_BOOT_ADDR_HIGH 0x4c +#define MSTARV7_CPU1_BOOT_ADDR_LOW 0x50 +#define MSTARV7_CPU1_UNLOCK 0x58 +#define MSTARV7_CPU1_UNLOCK_MAGIC 0xbabe +#endif + static void __iomem *l3bridge; static const char * const mstarv7_board_dt_compat[] __initconst = { "mstar,infinity", + "mstar,infinity2m", "mstar,infinity3", "mstar,mercury5", NULL, @@ -62,6 +70,46 @@ static void mstarv7_mb(void) } } +#ifdef CONFIG_SMP +static int mstarv7_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *np; + u32 bootaddr = (u32) __pa_symbol(secondary_startup_arm); + void __iomem *smpctrl; + + /* + * right now we don't know how to boot anything except + * cpu 1. + */ + if (cpu != 1) + return -EINVAL; + + np = of_find_compatible_node(NULL, NULL, "mstar,smpctrl"); + smpctrl = of_iomap(np, 0); + + if (!smpctrl) + return -ENODEV; + + /* set the boot address for the second cpu */ + writew(bootaddr & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_LOW); + writew((bootaddr >> 16) & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_HIGH); + + /* unlock the second cpu */ + writew(MSTARV7_CPU1_UNLOCK_MAGIC, smpctrl + MSTARV7_CPU1_UNLOCK); + + /* and away we go...*/ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + iounmap(smpctrl); + + return 0; +} + +static const struct smp_operations __initdata mstarv7_smp_ops = { + .smp_boot_secondary = mstarv7_boot_secondary, +}; +#endif + static void __init mstarv7_init(void) { struct device_node *np; @@ -77,4 +125,5 @@ static void __init mstarv7_init(void) DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)") .dt_compat = mstarv7_board_dt_compat, .init_machine = mstarv7_init, + .smp = smp_ops(mstarv7_smp_ops), MACHINE_END diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6c4d7356d918..6eecdef538bd 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -43,6 +43,14 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. +config ARCH_BCM4908 + bool "Broadcom BCM4908 family" + select GPIOLIB + help + This enables support for the Broadcom BCM4906, BCM4908 and + BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be + found in home routers. + config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts index 0c42272106af..3d5a2ae9aa39 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts @@ -9,3 +9,8 @@ model = "Pine64 PinePhone Developer Batch (1.0)"; compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; }; + +&sgm3140 { + enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ + flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index 3e99a87e9ce5..c9b9f6e9ee8c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -28,3 +28,8 @@ num-interpolated-steps = <50>; default-brightness-level = <400>; }; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts index a9f5b670c9b8..acc0ab53b9c1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts @@ -8,6 +8,11 @@ / { model = "Pine64 PinePhone (1.2)"; compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &backlight { @@ -38,3 +43,12 @@ interrupt-parent = <&pio>; interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ }; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; +}; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 5780713b0dba..2dfe9bae8c67 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &rtl8723cs; serial0 = &uart0; }; @@ -49,6 +50,24 @@ }; }; + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + + sgm3140: led-controller { + compatible = "sgmicro,sgm3140"; + vin-supply = <®_dcdc1>; + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ @@ -142,15 +161,25 @@ status = "okay"; /* Magnetometer */ - lis3mdl: lis3mdl@1e { + lis3mdl: magnetometer@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; vddio-supply = <®_dldo1>; }; + /* Light/proximity sensor */ + light-sensor@48 { + compatible = "sensortek,stk3311"; + reg = <0x48>; + interrupt-parent = <&pio>; + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ + vdd-supply = <®_ldo_io0>; + leda-supply = <®_dldo1>; + }; + /* Accelerometer/gyroscope */ - mpu6050@68 { + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&pio>; @@ -195,6 +224,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -251,10 +294,6 @@ #include "axp803.dtsi" -&ac_power_supply { - status = "okay"; -}; - &battery_power_supply { status = "okay"; }; @@ -274,8 +313,8 @@ ®_aldo3 { regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-name = "vcc-pll-avcc"; }; @@ -408,6 +447,19 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723cs-bt"; + device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */ + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; +}; + /* Connected to the modem (hardware flow control can't be used) */ &uart3 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index dc238814013c..51cc30e84e26 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -846,6 +846,20 @@ status = "disabled"; }; + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "rx", "tx"; + dmas = <&dma 27>, <&dma 27>; + status = "disabled"; + }; + dai: dai@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-codec-i2s"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts index f4c8966a6497..7fea1e4e2d49 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -10,6 +10,12 @@ compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; /delete-node/ reg_gmac_3v3; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &hdmi_connector { @@ -19,3 +25,12 @@ &emac { phy-supply = <®_aldo2>; }; + +&mmc1 { + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 28c77d6872f6..8a62a9fbe347 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -609,6 +609,19 @@ }; }; + i2s1: i2s@5091000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-i2s"; + reg = <0x05091000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdif: spdif@5093000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-h6-spdif"; @@ -680,7 +693,7 @@ status = "disabled"; }; - dwc3: dwc3@5200000 { + dwc3: usb@5200000 { compatible = "snps,dwc3"; reg = <0x05200000 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 7740f97c240f..359589d1dfa9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -441,6 +441,16 @@ status = "okay"; }; +&pcieA { + reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcieB { + reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + &pwm_ab { status = "okay"; pinctrl-0 = <&pwm_a_x20_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 724ee179b316..ba1c6dfdc4b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> +#include <dt-bindings/power/meson-axg-power.h> / { compatible = "amlogic,meson-axg"; @@ -171,6 +172,58 @@ #size-cells = <2>; ranges; + pcieA: pcie@f9800000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0x0 0xf9800000 0x0 0x400000>, + <0x0 0xff646000 0x0 0x2000>, + <0x0 0xf9f00000 0x0 0x100000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>; + clock-names = "general", "pclk", "port"; + resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>; + reset-names = "port", "apb"; + num-lanes = <1>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + + pcieB: pcie@fa000000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0x0 0xfa000000 0x0 0x400000>, + <0x0 0xff648000 0x0 0x2000>, + <0x0 0xfa400000 0x0 0x100000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>; + clock-names = "general", "pclk", "port"; + resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>; + reset-names = "port", "apb"; + num-lanes = <1>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + usb: usb@ffe09080 { compatible = "amlogic,meson-axg-usb-ctrl"; reg = <0x0 0xffe09080 0x0 0x20>; @@ -229,9 +282,19 @@ tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; + power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>; status = "disabled"; }; + pcie_phy: phy@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + phys = <&mipi_pcie_analog_dphy>; + phy-names = "analog"; + #phy-cells = <0>; + }; + pdm: audio-controller@ff632000 { compatible = "amlogic,axg-pdm"; reg = <0x0 0xff632000 0x0 0x34>; @@ -1159,6 +1222,52 @@ clocks = <&xtal>; clock-names = "xtal"; }; + + pwrc: power-controller { + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", + "vencl", "vid_lock"; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <250000000>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + + mipi_pcie_analog_dphy: phy { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; + status = "disabled"; + }; }; }; @@ -1171,6 +1280,19 @@ #mbox-cells = <1>; }; + mipi_dphy: phy@ff640000 { + compatible = "amlogic,axg-mipi-dphy"; + reg = <0x0 0xff640000 0x0 0x100>; + clocks = <&clkc CLKID_MIPI_DSI_PHY>; + clock-names = "pclk"; + resets = <&reset RESET_MIPI_PHY>; + reset-names = "phy"; + phys = <&mipi_pcie_analog_dphy>; + phy-names = "analog"; + #phy-cells = <0>; + status = "disabled"; + }; + audio: bus@ff642000 { compatible = "simple-bus"; reg = <0x0 0xff642000 0x0 0x2000>; @@ -1605,6 +1727,15 @@ }; }; + ge2d: ge2d@ff940000 { + compatible = "amlogic,axg-ge2d"; + reg = <0x0 0xff940000 0x0 0x10000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_VAPB>; + resets = <&reset RESET_GE2D>; + reset-names = "core"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 8514fe6a275a..9c90d562ada1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2183,6 +2183,12 @@ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; + watchdog: wdt@f0d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x0 0xf0d0 0x0 0x10>; + clocks = <&xtal>; + }; + spicc0: spi@13000 { compatible = "amlogic,meson-g12a-spicc"; reg = <0x0 0x13000 0x0 0x44>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 1b07c8c06eac..463a72d6bb7c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -340,7 +340,7 @@ eee-broken-1000t; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index f0c56a16af3d..0e5c500fb78f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -14,6 +14,11 @@ compatible = "azw,gtking", "amlogic,g12b"; model = "Beelink GT-King Pro"; + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -112,6 +117,18 @@ status = "okay"; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + &tdmif_b { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index eeb7bc5539ef..10b87eb97b14 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -14,6 +14,11 @@ compatible = "azw,gtking", "amlogic,g12b"; model = "Beelink GT-King"; + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; @@ -122,6 +127,19 @@ status = "okay"; }; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + &spdifout { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 6982632ae646..39a09661c5f6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -413,7 +413,7 @@ max-speed = <1000>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index 2802ddbb83ac..feb088504740 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -264,7 +264,7 @@ max-speed = <1000>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7be3e354093b..089e0636ba8a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -7,6 +7,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; @@ -130,6 +131,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-NANOPI-K2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO { @@ -165,7 +205,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 67d901ed2fa3..b5b11cb9f393 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -10,6 +10,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "nexbox,a95x", "amlogic,meson-gxbb"; @@ -139,6 +140,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-NEXBOX-A95X"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cvbs_vdac_port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 70fcfb7b0683..c04ef57f7b3b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -9,6 +9,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; @@ -172,6 +173,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-ODROID-C2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO { @@ -200,7 +240,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 222ee8069cfa..9b0b81f191f1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -126,7 +126,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 83b985bb015e..0c1570153842 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -7,10 +7,50 @@ /dts-v1/; #include "meson-gxbb-wetek.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "wetek,hub", "amlogic,meson-gxbb"; model = "WeTek Hub"; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-WETEK-HUB"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &ir { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 2ab8a3d10079..f2562c7de67c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -8,11 +8,19 @@ #include "meson-gxbb-wetek.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "wetek,play2", "amlogic,meson-gxbb"; model = "WeTek Play 2"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { led-wifi { label = "wetek-play:wifi-status"; @@ -39,6 +47,59 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXBB-WETEK-PLAY2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; &i2c_A { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index ad812854a107..a350fee1264d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -147,7 +147,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index b08c4537f260..b2ab05c22090 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -82,7 +82,7 @@ /* External PHY reset is shared with internal PHY Led signal */ reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts index 0b95e9ecbef0..ad6d72254150 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -63,6 +63,10 @@ pinctrl-names = "default"; }; +&ir { + linux,rc-map-name = "rc-khamsin"; +}; + /* This is connected to the Bluetooth module: */ &uart_A { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 8bcdffdf55d0..6fe589cd2ba2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -5,9 +5,9 @@ /dts-v1/; -#include <dt-bindings/input/input.h> - #include "meson-gxl-s905x-p212.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl"; @@ -63,6 +63,45 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-KHADAS-VIM1"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO { @@ -97,8 +136,7 @@ pinctrl-names = "default"; rtc: rtc@51 { - /* has to be enabled manually when a battery is connected: */ - status = "disabled"; + status = "okay"; compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 675eaa87963e..9a3c08e6e6cc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -84,7 +84,6 @@ regulator-always-on; }; - vcck: regulator-vcck { compatible = "regulator-fixed"; regulator-name = "VCCK"; @@ -124,7 +123,6 @@ regulator-always-on; }; - vddio_card: regulator-vddio-card { compatible = "regulator-gpio"; regulator-name = "VDDIO_CARD"; @@ -195,7 +193,6 @@ }; }; - &aiu { status = "okay"; }; @@ -207,7 +204,6 @@ hdmi-phandle = <&hdmi_tx>; }; - ðmac { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index bff8ec2c1c70..bf9877d33427 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -7,9 +7,9 @@ /dts-v1/; -#include <dt-bindings/input/input.h> - #include "meson-gxm.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; @@ -145,6 +145,45 @@ clock-frequency = <32768>; pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXM-KHADAS-VIM2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; &cec_AO { @@ -154,7 +193,6 @@ hdmi-phandle = <&hdmi_tx>; }; - &cpu_cooling_maps { map0 { cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; @@ -194,7 +232,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; @@ -228,8 +266,7 @@ pinctrl-names = "default"; rtc: rtc@51 { - /* has to be enabled manually when a battery is connected: */ - status = "disabled"; + status = "okay"; compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; @@ -341,7 +378,7 @@ #size-cells = <1>; compatible = "winbond,w25q16", "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <3000000>; + spi-max-frequency = <104000000>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 83eca3af44ce..dfa7a37a1281 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -112,7 +112,7 @@ max-speed = <1000>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index ea45ae0c71b7..8edbfe040805 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -64,7 +64,7 @@ /* External PHY reset is shared with internal PHY Led signal */ reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index c89c9f846fb1..dde7cfe12cff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -114,7 +114,7 @@ max-speed = <1000>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index fe4145112295..411cc312fc62 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -42,11 +42,28 @@ }; }; + cpu0: cpu@0 { + capacity-dmips-mhz = <1024>; + }; + + cpu1: cpu@1 { + capacity-dmips-mhz = <1024>; + }; + + cpu2: cpu@2 { + capacity-dmips-mhz = <1024>; + }; + + cpu3: cpu@3 { + capacity-dmips-mhz = <1024>; + }; + cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; #cooling-cells = <2>; @@ -57,6 +74,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; #cooling-cells = <2>; @@ -67,6 +85,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; #cooling-cells = <2>; @@ -77,6 +96,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 7b46555ac55a..8f8656262ae7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> @@ -13,6 +14,8 @@ aliases { serial0 = &uart_AO; ethernet0 = ðmac; + rtc0 = &rtc; + rtc1 = &vrtc; }; chosen { @@ -40,14 +43,16 @@ leds { compatible = "gpio-leds"; - led-white { - label = "vim3:white:sys"; + white { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - led-red { - label = "vim3:red"; + red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; }; }; @@ -330,7 +335,7 @@ #gpio-cells = <2>; }; - rtc@51 { + rtc: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 71317f5aada1..c309517abae3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -130,7 +130,7 @@ opp-microvolt = <790000>; }; - opp-1512000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <800000>; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index cb7de8d99223..998e240aa698 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -5,5 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb +subdir-y += bcm4908 subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile new file mode 100644 index 000000000000..ef26c23603ce --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts new file mode 100644 index 000000000000..13c6b86eef21 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "bcm4908.dtsi" + +/ { + compatible = "asus,gt-ac5300", "brcm,bcm4908"; + model = "Asus GT-AC5300"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + brcm,nand-has-wp; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi new file mode 100644 index 000000000000..f873dc44ce9c --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/dts-v1/; + +/ { + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x80000000 0x10000>; + + usb@c300 { + compatible = "generic-ehci"; + reg = <0xc300 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb@c400 { + compatible = "generic-ohci"; + reg = <0xc400 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb@d000 { + compatible = "generic-xhci"; + reg = <0xd000 0x8c8>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0xff800000 0x3000>; + + timer: timer@400 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x400 0x3c>; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0x500 0x28>, <0x528 0x28>; + + #gpio-cells = <2>; + gpio-controller; + }; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "okay"; + }; + + nand@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nand"; + status = "okay"; + + nandcs: nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index d77b88af9582..8997f8f2b96c 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -87,7 +87,7 @@ status = "disabled"; }; - bus_g2d_400_opp_table: opp_table2 { + bus_g2d_400_opp_table: opp-table2 { compatible = "operating-points-v2"; opp-shared; @@ -117,7 +117,7 @@ }; }; - bus_g2d_266_opp_table: opp_table3 { + bus_g2d_266_opp_table: opp-table3 { compatible = "operating-points-v2"; opp-267000000 { @@ -137,7 +137,7 @@ }; }; - bus_gscl_opp_table: opp_table4 { + bus_gscl_opp_table: opp-table4 { compatible = "operating-points-v2"; opp-333000000 { @@ -151,7 +151,7 @@ }; }; - bus_hevc_opp_table: opp_table5 { + bus_hevc_opp_table: opp-table5 { compatible = "operating-points-v2"; opp-shared; @@ -175,7 +175,7 @@ }; }; - bus_noc2_opp_table: opp_table6 { + bus_noc2_opp_table: opp-table6 { compatible = "operating-points-v2"; opp-400000000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 9df7c65593a1..32a6518517e5 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -329,7 +329,7 @@ }; pcie_bus: pcie_bus { - samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 829fea23d4ab..03486a8ffc67 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -92,9 +92,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max98504: max98504@31 { + max98504: amplifier@31 { compatible = "maxim,max98504"; reg = <0x31>; maxim,rx-path = <1>; @@ -386,7 +385,7 @@ status = "okay"; clock-frequency = <2500000>; - s2mps13-pmic@66 { + pmic@66 { compatible = "samsung,s2mps13-pmic"; interrupt-parent = <&gpa0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -817,7 +816,7 @@ status = "okay"; clock-frequency = <1000000>; - sii8620@39 { + bridge@39 { reg = <0x39>; compatible = "sil,sii8620"; cvcc10-supply = <&ldo36_reg>; @@ -852,7 +851,7 @@ &hsi2c_8 { status = "okay"; - max77843@66 { + pmic@66 { compatible = "maxim,max77843"; interrupt-parent = <&gpa1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; @@ -861,7 +860,7 @@ muic: max77843-muic { compatible = "maxim,max77843-muic"; - musb_con: musb_connector { + musb_con: musb-connector { compatible = "samsung,usb-connector-11pin", "usb-b-connector"; label = "micro-USB"; @@ -969,6 +968,25 @@ bus-width = <4>; }; +&pcie { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_bus &pcie_wlanen>; + vdd10-supply = <&ldo6_reg>; + vdd18-supply = <&ldo7_reg>; + assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>, + <&cmu_top CLK_MOUT_SCLK_PCIE_100>; + assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; + assigned-clock-rates = <0>, <100000000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pcie_phy { + status = "okay"; +}; + &ppmu_d0_general { status = "okay"; events { @@ -1065,7 +1083,7 @@ PIN(INPUT, gpf5-7, DOWN, FAST_SR1); }; - te_irq: te_irq { + te_irq: te-irq { samsung,pins = "gpf1-3"; samsung,pin-function = <0xf>; }; @@ -1085,8 +1103,11 @@ pinctrl-names = "default"; pinctrl-0 = <&initial_ese>; + pcie_wlanen: pcie-wlanen { + PIN(INPUT, gpj2-0, UP, FAST_SR4); + }; + initial_ese: initial-state { - PIN(INPUT, gpj2-0, DOWN, FAST_SR1); PIN(INPUT, gpj2-1, DOWN, FAST_SR1); PIN(INPUT, gpj2-2, DOWN, FAST_SR1); }; @@ -1231,7 +1252,7 @@ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; status = "okay"; - wm5110: wm5110-codec@0 { + wm5110: audio-codec@0 { compatible = "wlf,wm5110"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 8eb4576da8f3..6433f9ee35e1 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -23,7 +23,7 @@ interrupt-parent = <&gic>; - arm_a53_pmu { + arm-a53-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, @@ -32,7 +32,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; - arm_a57_pmu { + arm-a57-pmu { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, @@ -137,7 +137,7 @@ }; }; - cluster_a53_opp_table: opp_table0 { + cluster_a53_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -183,7 +183,7 @@ }; }; - cluster_a57_opp_table: opp_table1 { + cluster_a57_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -1029,6 +1029,11 @@ reg = <0x145f0000 0x1038>; }; + syscon_fsys: syscon@156f0000 { + compatible = "syscon"; + reg = <0x156f0000 0x1044>; + }; + gsc_0: video-scaler@13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; @@ -1445,7 +1450,6 @@ clock-names = "adc"; clocks = <&cmu_peric CLK_PCLK_ADCIF>; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; @@ -1647,7 +1651,7 @@ ranges; status = "disabled"; - usbdrd_dwc3: dwc3@15400000 { + usbdrd_dwc3: usb@15400000 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, <&cmu_fsys CLK_ACLK_USBDRD30>, @@ -1700,7 +1704,7 @@ ranges; status = "disabled"; - usbhost_dwc3: dwc3@15a00000 { + usbhost_dwc3: usb@15a00000 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, <&cmu_fsys CLK_ACLK_USBHOST30>, @@ -1830,6 +1834,37 @@ status = "disabled"; }; }; + + pcie_phy: pcie-phy@15680000 { + compatible = "samsung,exynos5433-pcie-phy"; + reg = <0x15680000 0x1000>; + samsung,pmu-syscon = <&pmu_system_controller>; + samsung,fsys-sysreg = <&syscon_fsys>; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie: pcie@15700000 { + compatible = "samsung,exynos5433-pcie"; + reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, + <0x0c000000 0x1000>; + reg-names = "dbi", "elbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PCIE>, + <&cmu_fsys CLK_PCLK_PCIE_PHY>; + clock-names = "pcie", "pcie_bus"; + num-lanes = <1>; + num-viewport = <3>; + bus-range = <0x00 0xff>; + phys = <&pcie_phy>; + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; + status = "disabled"; + }; }; timer: timer { diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 92fecc539c6c..695d4c140646 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -87,7 +87,7 @@ samsung,i2c-max-bus-freq = <200000>; status = "okay"; - s2mps15_pmic@66 { + pmic@66 { compatible = "samsung,s2mps15-pmic"; reg = <0x66>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index b9ed6a33e290..10244e59d56d 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -79,8 +79,10 @@ }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci"; method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0xC4000003>; }; soc: soc@0 { @@ -481,13 +483,6 @@ pmu_system_controller: system-controller@105c0000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; - mask = <0x1>; - }; }; rtc: rtc@10590000 { @@ -567,7 +562,6 @@ clocks = <&clock_peric0 PCLK_ADCIF>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; @@ -654,7 +648,7 @@ #size-cells = <1>; ranges; - dwc3@15400000 { + usb@15400000 { compatible = "snps,dwc3"; reg = <0x15400000 0x10000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; @@ -687,3 +681,4 @@ }; #include "exynos7-pinctrl.dtsi" +#include "arm/exynos-syscon-restart.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f8d59433af01..6f0777ee6cd6 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -27,10 +27,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 6a2c09199047..626b709d1fb9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -291,43 +291,46 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x0000002c 0x00000002 0x00000032 0x00000003 0x00000039 0x00000004 0x0000003f 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x0000005f + 0x0000000a 0x00000066 + 0x0000000b 0x0000006c + + 0x00010000 0x00000026 + 0x00010001 0x0000002d 0x00010002 0x00000035 0x00010003 0x0000003d 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00010005 0x0000004d + 0x00010006 0x00000055 + 0x00010007 0x0000005d + 0x00010008 0x00000065 + 0x00010009 0x0000006d + + 0x00020000 0x00000026 + 0x00020001 0x00000030 + 0x00020002 0x0000003a + 0x00020003 0x00000044 + 0x00020004 0x0000004e + 0x00020005 0x00000059 + 0x00020006 0x00000063 + + 0x00030000 0x00000014 + 0x00030001 0x00000021 + 0x00030002 0x0000002e + 0x00030003 0x0000003a + 0x00030004 0x00000047 + 0x00030005 0x00000053 + 0x00030006 0x00000060>; big-endian; #thermal-sensor-cells = <1>; }; @@ -401,7 +404,7 @@ #interrupt-cells = <2>; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1012a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -454,7 +457,7 @@ <&clockgen 4 3>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -475,7 +478,7 @@ status = "disabled"; }; - usb1: usb2@8600000 { + usb1: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; interrupts = <0 139 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 8161dd237971..0516076087ae 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -23,6 +23,8 @@ serial2 = &lpuart1; spi0 = &fspi; spi1 = &dspi2; + mmc0 = &esdhc1; + mmc1 = &esdhc; }; buttons0 { @@ -60,6 +62,10 @@ }; }; +&can0 { + status = "okay"; +}; + &dspi2 { status = "okay"; }; @@ -155,20 +161,10 @@ }; partition@210000 { - reg = <0x210000 0x0f0000>; + reg = <0x210000 0x1d0000>; label = "bootloader"; }; - partition@300000 { - reg = <0x300000 0x040000>; - label = "DP firmware"; - }; - - partition@340000 { - reg = <0x340000 0x0a0000>; - label = "trusted firmware"; - }; - partition@3e0000 { reg = <0x3e0000 0x020000>; label = "bootloader environment"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 13cdc958ba3e..c0786b713791 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -23,6 +23,8 @@ gpio2 = &gpio3; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 1efb61cff454..c1d1ba459307 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -19,6 +19,8 @@ crypto = &crypto; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7a6fb7e1fb82..60ff19fa53b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -90,6 +90,14 @@ clocks = <&osc_27m>; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + }; + reboot { compatible ="syscon-reboot"; regmap = <&rst>; @@ -309,7 +317,7 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen 2 0>, <&clockgen 2 0>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -386,6 +394,24 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; @@ -934,7 +960,7 @@ ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 2 3>; little-endian; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 0464b8aa4bc4..bbae4b353d3f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -403,43 +403,47 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; + fsl,tmu-calibration = <0x00000000 0x00000023 + 0x00000001 0x0000002a + 0x00000002 0x00000031 + 0x00000003 0x00000037 + 0x00000004 0x0000003e + 0x00000005 0x00000044 + 0x00000006 0x0000004b + 0x00000007 0x00000051 + 0x00000008 0x00000058 + 0x00000009 0x0000005e + 0x0000000a 0x00000065 + 0x0000000b 0x0000006b + + 0x00010000 0x00000023 + 0x00010001 0x0000002b + 0x00010002 0x00000033 + 0x00010003 0x0000003b + 0x00010004 0x00000043 + 0x00010005 0x0000004b + 0x00010006 0x00000054 + 0x00010007 0x0000005c + 0x00010008 0x00000064 + 0x00010009 0x0000006c + + 0x00020000 0x00000021 + 0x00020001 0x0000002c + 0x00020002 0x00000036 + 0x00020003 0x00000040 + 0x00020004 0x0000004b + 0x00020005 0x00000055 + 0x00020006 0x0000005f + + 0x00030000 0x00000013 + 0x00030001 0x0000001d + 0x00030002 0x00000028 + 0x00030003 0x00000032 + 0x00030004 0x0000003d + 0x00030005 0x00000047 + 0x00030006 0x00000052 + 0x00030007 0x0000005c>; #thermal-sensor-cells = <1>; }; @@ -725,7 +729,7 @@ status = "disabled"; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>; @@ -750,7 +754,7 @@ <&clockgen 4 0>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -761,7 +765,7 @@ status = "disabled"; }; - usb1: usb3@3000000 { + usb1: usb@3000000 { compatible = "snps,dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <0 61 0x4>; @@ -772,7 +776,7 @@ status = "disabled"; }; - usb2: usb3@3100000 { + usb2: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 63 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 1fa39bacff4b..025e1f587662 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -400,45 +400,49 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 + <0x00000000 0x00000023 + 0x00000001 0x00000029 + 0x00000002 0x0000002f + 0x00000003 0x00000036 + 0x00000004 0x0000003c + 0x00000005 0x00000042 + 0x00000006 0x00000049 + 0x00000007 0x0000004f + 0x00000008 0x00000055 + 0x00000009 0x0000005c + 0x0000000a 0x00000062 + 0x0000000b 0x00000068 /* Calibration data group 2 */ - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 + 0x00010000 0x00000022 + 0x00010001 0x0000002a + 0x00010002 0x00000032 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000052 + 0x00010007 0x0000005a + 0x00010008 0x00000062 + 0x00010009 0x0000006a /* Calibration data group 3 */ - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d + 0x00020000 0x00000021 + 0x00020001 0x0000002b + 0x00020002 0x00000035 + 0x00020003 0x0000003e + 0x00020004 0x00000048 + 0x00020005 0x00000052 + 0x00020006 0x0000005c /* Calibration data group 4 */ - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00030000 0x00000011 + 0x00030001 0x0000001a + 0x00030002 0x00000024 + 0x00030003 0x0000002e + 0x00030004 0x00000038 + 0x00030005 0x00000042 + 0x00030006 0x0000004c + 0x00030007 0x00000056>; big-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 5633e59febc3..528ec72d0b83 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -17,6 +17,113 @@ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; }; +&dpmac2 { + phy-handle = <&mdio2_aquantia_phy>; + phy-connection-type = "10gbase-r"; + pcs-handle = <&pcs2>; +}; + +&dpmac3 { + phy-handle = <&mdio1_phy5>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_0>; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; +}; + +&dpmac5 { + phy-handle = <&mdio1_phy7>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_2>; +}; + +&dpmac6 { + phy-handle = <&mdio1_phy8>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_3>; +}; + +&dpmac7 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_0>; +}; + +&dpmac8 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_1>; +}; + +&dpmac9 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_2>; +}; + +&dpmac10 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_3>; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy5: ethernet-phy@c { + reg = <0xc>; + }; + + mdio1_phy6: ethernet-phy@d { + reg = <0xd>; + }; + + mdio1_phy7: ethernet-phy@e { + reg = <0xe>; + }; + + mdio1_phy8: ethernet-phy@f { + reg = <0xf>; + }; + + mdio1_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + mdio1_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + mdio1_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + mdio1_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; +}; + +&emdio2 { + status = "okay"; + + mdio2_aquantia_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; + &i2c0 { status = "okay"; @@ -87,6 +194,18 @@ status = "okay"; }; +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + &qspi { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 692d8f4a206d..6403455ed039 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -420,7 +420,7 @@ status = "disabled"; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; @@ -431,7 +431,7 @@ status = "disabled"; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -517,6 +517,17 @@ status = "disabled"; }; + pcie_ep1: pcie-ep@3400000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x20 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <24>; + num-ob-windows = <256>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + pcie2: pcie@3500000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ @@ -543,6 +554,16 @@ status = "disabled"; }; + pcie_ep2: pcie-ep@3500000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x28 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <6>; + status = "disabled"; + }; + pcie3: pcie@3600000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ @@ -569,6 +590,16 @@ status = "disabled"; }; + pcie_ep3: pcie-ep@3600000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x30 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <6>; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; @@ -672,6 +703,87 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3_0: ethernet-phy@0 { + reg = <0>; + }; + + pcs3_1: ethernet-phy@1 { + reg = <1>; + }; + + pcs3_2: ethernet-phy@2 { + reg = <2>; + }; + + pcs3_3: ethernet-phy@3 { + reg = <3>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7_0: ethernet-phy@0 { + reg = <0>; + }; + + pcs7_1: ethernet-phy@1 { + reg = <1>; + }; + + pcs7_2: ethernet-phy@2 { + reg = <2>; + }; + + pcs7_3: ethernet-phy@3 { + reg = <3>; + }; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -749,52 +861,52 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index f6b4d75a258b..60563917be44 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -22,3 +22,123 @@ stdout-path = "serial1:115200n8"; }; }; + +&dpmac1 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac2 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac3 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac5 { + phy-handle = <&mdio2_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac6 { + phy-handle = <&mdio2_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac7 { + phy-handle = <&mdio2_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac8 { + phy-handle = <&mdio2_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy1: ethernet-phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + + mdio1_phy2: ethernet-phy@11 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x11>; + }; + + mdio1_phy3: ethernet-phy@12 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x12>; + }; + + mdio1_phy4: ethernet-phy@13 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x13>; + }; +}; + +&emdio2 { + status = "okay"; + + mdio2_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + mdio2_phy2: ethernet-phy@1 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + mdio2_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + mdio2_phy4: ethernet-phy@3 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; + +&pcs_mdio1 { + status = "okay"; +}; + +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index e7abb74bd816..c68901f8c6f0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -458,6 +458,232 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio4: mdio@8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs4: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio5: mdio@8c17000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs5: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio6: mdio@8c1b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs6: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio8: mdio@8c23000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs8: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio9: mdio@8c27000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c27000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs9: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio10: mdio@8c2b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs10: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio11: mdio@8c2f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs11: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio12: mdio@8c33000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c33000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs12: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio13: mdio@8c37000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c37000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs13: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio14: mdio@8c3b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs14: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio15: mdio@8c3f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs15: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio16: mdio@8c43000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c43000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs16: ethernet-phy@0 { + reg = <0>; + }; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ @@ -482,84 +708,100 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x1>; + pcs-handle = <&pcs1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x2>; + pcs-handle = <&pcs2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x3>; + pcs-handle = <&pcs3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x4>; + pcs-handle = <&pcs4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x5>; + pcs-handle = <&pcs5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x6>; + pcs-handle = <&pcs6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x7>; + pcs-handle = <&pcs7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x8>; + pcs-handle = <&pcs8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x9>; + pcs-handle = <&pcs9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; + pcs-handle = <&pcs10>; }; - dpmac11: dpmac@b { + dpmac11: ethernet@b { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xb>; + pcs-handle = <&pcs11>; }; - dpmac12: dpmac@c { + dpmac12: ethernet@c { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xc>; + pcs-handle = <&pcs12>; }; - dpmac13: dpmac@d { + dpmac13: ethernet@d { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xd>; + pcs-handle = <&pcs13>; }; - dpmac14: dpmac@e { + dpmac14: ethernet@e { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xe>; + pcs-handle = <&pcs14>; }; - dpmac15: dpmac@f { + dpmac15: ethernet@f { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xf>; + pcs-handle = <&pcs15>; }; - dpmac16: dpmac@10 { + dpmac16: ethernet@10 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x10>; + pcs-handle = <&pcs16>; }; }; }; @@ -860,7 +1102,7 @@ dma-coherent; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -871,7 +1113,7 @@ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 54fe8cd3a711..7723ad5efd37 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -35,6 +35,18 @@ status = "okay"; }; +&dpmac3 { + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac4 { + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + &dpmac17 { phy-handle = <&rgmii_phy1>; phy-connection-type = "rgmii-id"; @@ -61,6 +73,18 @@ reg = <0x2>; eee-broken-1000t; }; + + aquantia_phy1: ethernet-phy@4 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + aquantia_phy2: ethernet-phy@5 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; }; &esdhc0 { @@ -156,6 +180,14 @@ }; }; +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 83072da6f6c6..197397777c83 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1305,6 +1305,240 @@ status = "disabled"; }; + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio4: mdio@8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs4: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio5: mdio@8c17000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs5: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio6: mdio@8c1b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs6: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio8: mdio@8c23000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs8: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio9: mdio@8c27000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c27000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs9: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio10: mdio@8c2b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs10: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio11: mdio@8c2f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs11: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio12: mdio@8c33000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c33000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs12: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio13: mdio@8c37000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c37000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs13: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio14: mdio@8c3b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs14: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio15: mdio@8c3f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs15: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio16: mdio@8c43000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c43000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs16: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio17: mdio@8c47000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c47000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs17: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio18: mdio@8c4b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c4b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs18: ethernet-phy@0 { + reg = <0>; + }; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, @@ -1330,94 +1564,112 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x1>; + pcs-handle = <&pcs1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x2>; + pcs-handle = <&pcs2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x3>; + pcs-handle = <&pcs3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x4>; + pcs-handle = <&pcs4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x5>; + pcs-handle = <&pcs5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x6>; + pcs-handle = <&pcs6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x7>; + pcs-handle = <&pcs7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x8>; + pcs-handle = <&pcs8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x9>; + pcs-handle = <&pcs9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; + pcs-handle = <&pcs10>; }; - dpmac11: dpmac@b { + dpmac11: ethernet@b { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xb>; + pcs-handle = <&pcs11>; }; - dpmac12: dpmac@c { + dpmac12: ethernet@c { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xc>; + pcs-handle = <&pcs12>; }; - dpmac13: dpmac@d { + dpmac13: ethernet@d { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xd>; + pcs-handle = <&pcs13>; }; - dpmac14: dpmac@e { + dpmac14: ethernet@e { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xe>; + pcs-handle = <&pcs14>; }; - dpmac15: dpmac@f { + dpmac15: ethernet@f { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xf>; + pcs-handle = <&pcs15>; }; - dpmac16: dpmac@10 { + dpmac16: ethernet@10 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x10>; + pcs-handle = <&pcs16>; }; - dpmac17: dpmac@11 { + dpmac17: ethernet@11 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x11>; + pcs-handle = <&pcs17>; }; - dpmac18: dpmac@12 { + dpmac18: ethernet@12 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x12>; + pcs-handle = <&pcs18>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts new file mode 100644 index 000000000000..91786848bd30 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162AQDS +// +// Copyright 2020 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2162AQDS"; + compatible = "fsl,lx2162a-qds", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LTM4619-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + eee-broken-1000t; + }; + }; + + mdio@8 { /* On-board RTL8211F PHY #2 RGMII2 */ + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x2>; + eee-broken-1000t; + }; + }; + + mdio@18 { /* Slot #1 */ + reg = <0x18>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@19 { /* Slot #2 */ + reg = <0x19>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1a { /* Slot #3 */ + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1b { /* Slot #4 */ + reg = <0x1b>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1c { /* Slot #5 */ + reg = <0x1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1d { /* Slot #6 */ + reg = <0x1d>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1e { /* Slot #7 */ + reg = <0x1e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1f { /* Slot #8 */ + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* Slot #1 (secondary EMI) */ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { /* Slot #2 (secondary EMI) */ + reg = <0x01>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@2 { /* Slot #3 (secondary EMI) */ + reg = <0x02>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@3 { /* Slot #4 (secondary EMI) */ + reg = <0x03>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@4 { /* Slot #5 (secondary EMI) */ + reg = <0x04>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@5 { /* Slot #6 (secondary EMI) */ + reg = <0x05>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@6 { /* Slot #7 (secondary EMI) */ + reg = <0x06>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@7 { /* Slot #8 (secondary EMI) */ + reg = <0x07>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&dspi0 { + status = "okay"; + + dflash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + status = "okay"; + + dflash1: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi2 { + status = "okay"; + + dflash2: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + fpga@66 { + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bit 2:0 */ + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + power-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index b88c3c99b007..d897913537ca 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -4,6 +4,11 @@ */ / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + usdhc1_pwrseq: usdhc1_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -24,6 +29,18 @@ cpu-supply = <&buck2_reg>; }; +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; @@ -63,6 +80,22 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -78,6 +111,10 @@ interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1"; @@ -191,7 +228,7 @@ reg = <0x50>; }; - rtc@51 { + rtc: rtc@51 { compatible = "nxp,pcf85263"; reg = <0x51>; }; @@ -258,155 +295,166 @@ }; &iomuxc { - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; - pinctrl_pmic: pmicirqgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 - >; - }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 - MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 - MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 - MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 - >; - }; + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 + >; + }; - pinctrl_usdhc1_gpio: usdhc1gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - >; - }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; - pinctrl_wlan: wlangrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 521eb3a5a12e..6518f088b2c2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -41,6 +41,14 @@ enable-active-high; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -364,6 +372,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f + >; + }; + pinctrl_gpio_wlf: gpiowlfgrp { fsl,pins = < MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 @@ -469,7 +483,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts new file mode 100644 index 000000000000..d17abb515835 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n801x-som.dtsi" + +/ { + model = "Kontron i.MX8MM N801X S"; + compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <100000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <100>; + reset-deassert-us = <100>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi new file mode 100644 index 000000000000..d0456daefda8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron i.MX8MM N801X SoM"; + compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index 49082529764f..1dc9d187601c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -552,7 +552,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 05ee062548e4..c824f2615fe8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -194,16 +194,16 @@ pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -339,6 +339,49 @@ status = "disabled"; }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; + + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index 8311b95dee49..b4225cfcb6d9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -14,6 +14,22 @@ compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; }; +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + &i2c1 { pmic: pmic@25 { compatible = "nxp,pca9450b"; @@ -110,19 +126,3 @@ }; }; }; - -&A53_0 { - /delete-property/operating-points-v2; -}; - -&A53_1 { - /delete-property/operating-points-v2; -}; - -&A53_2 { - /delete-property/operating-points-v2; -}; - -&A53_3 { - /delete-property/operating-points-v2; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 4aa0dbd578df..76d042a4cf09 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -38,6 +38,14 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; + }; }; &fec1 { @@ -202,6 +210,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 @@ -340,7 +354,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index 7f356edf9f91..b16c7caf34c1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -542,7 +542,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 16c7202885d7..ee1790230490 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -186,6 +186,13 @@ clock-output-names = "clk_ext4"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -225,10 +232,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -246,6 +253,149 @@ #size-cells = <1>; ranges; + spba: bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI2_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI2_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI3_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI5_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI5_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + fsl,shared-interrupt; + fsl,dataline = <0 0xf 0xf>; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI6_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI6_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PDM_IPG>, + <&clk IMX8MN_CLK_PDM_ROOT>, + <&clk IMX8MN_AUDIO_PLL1_OUT>, + <&clk IMX8MN_AUDIO_PLL2_OUT>, + <&clk IMX8MN_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; + + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MN_CLK_24M>, /* rxtx0 */ + <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MN_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai7: sai@300b0000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x300b0000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI7_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI7_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + easrc: easrc@300c0000 { + compatible = "fsl,imx8mn-easrc"; + reg = <0x300c0000 0x10000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; + status = "disabled"; + }; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index ad66f1286d95..b10dce8767a4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -33,6 +33,28 @@ <0x1 0x00000000 0 0xc0000000>; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + regulator-name = "can1-stby"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -45,6 +67,20 @@ }; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "disabled";/* can2 pin conflict with pdm */ +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; @@ -144,6 +180,32 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /* CAN1_STBY */ + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */ + >; + }; + pinctrl_gpio_led: gpioledgrp { fsl,pins = < MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 @@ -262,7 +324,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 6038f66aefc1..ecccfbb4f5ad 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -133,6 +133,13 @@ clock-output-names = "clk_ext4"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -202,10 +209,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -545,6 +552,36 @@ status = "disabled"; }; + flexcan1: can@308c0000 { + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN1_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + flexcan2: can@308d0000 { + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + reg = <0x308d0000 0x10000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN2_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 5>; + status = "disabled"; + }; + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 2418cca00bc5..85b045253a0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -57,6 +57,7 @@ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; }; wm8524: audio-codec { @@ -87,6 +88,21 @@ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; }; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; + + sound-hdmi-arc { + compatible = "fsl,imx-audio-spdif"; + model = "imx-hdmi-arc"; + spdif-controller = <&spdif2>; + spdif-in; + }; }; &A53_0 { @@ -336,6 +352,22 @@ status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&spdif2 { + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -467,6 +499,13 @@ >; }; + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index e3c6d1272198..64fc546b110f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -250,7 +250,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic_5v>; - pmic-5v { + pmic-5v-hog { gpio-hog; gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 5e0e7d0f1bc4..a841a023e8e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -606,11 +606,25 @@ "clk_ext3", "clk_ext4"; assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>, <&clk IMX8MQ_CLK_A53_CORE>, - <&clk IMX8MQ_CLK_NOC>; + <&clk IMX8MQ_CLK_NOC>, + <&clk IMX8MQ_CLK_AUDIO_AHB>, + <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, + <&clk IMX8MQ_AUDIO_PLL2_BYPASS>, + <&clk IMX8MQ_AUDIO_PLL1>, + <&clk IMX8MQ_AUDIO_PLL2>; assigned-clock-rates = <0>, <0>, - <800000000>; + <800000000>, + <0>, + <0>, + <0>, + <786432000>, + <722534400>; assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, - <&clk IMX8MQ_ARM_PLL_OUT>; + <&clk IMX8MQ_ARM_PLL_OUT>, + <0>, + <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_AUDIO_PLL1>, + <&clk IMX8MQ_AUDIO_PLL2>; }; src: reset-controller@30390000 { @@ -779,6 +793,30 @@ ranges = <0x30800000 0x30800000 0x400000>, <0x08000000 0x08000000 0x10000000>; + spdif1: spdif@30810000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30810000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; @@ -848,6 +886,30 @@ status = "disabled"; }; + spdif2: spdif@308a0000 { + compatible = "fsl,imx35-spdif"; + reg = <0x308a0000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sai2: sai@308b0000 { #sound-dai-cells = <0>; compatible = "fsl,imx8mq-sai"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 994140fbc916..49c19c6879f9 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -971,8 +971,8 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>; - clock-names = "apb_pclk"; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>, <&crg_ctrl HI3660_CLK_GATE_SPI2>; + clock-names = "sspclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>; num-cs = <1>; @@ -986,8 +986,8 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>; - clock-names = "apb_pclk"; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>, <&crg_ctrl HI3660_CLK_GATE_SPI3>; + clock-names = "sspclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>; num-cs = <1>; @@ -1045,7 +1045,8 @@ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0>, <0 0>; + freq-table-hz = <0 0 + 0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; @@ -1168,7 +1169,7 @@ }; }; - dwc3: dwc3@ff100000 { + dwc3: usb@ff100000 { compatible = "snps,dwc3"; reg = <0x0 0xff100000 0x0 0x100000>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 2dcffa3ed218..85b0dfb35d6d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -213,7 +213,6 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>, <&crg_ctrl HI3670_PCLK>; clock-names = "uartclk", "apb_pclk"; - pinctrl-names = "default"; status = "disabled"; }; @@ -260,7 +259,6 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>, <&crg_ctrl HI3670_PCLK>; clock-names = "uartclk", "apb_pclk"; - pinctrl-names = "default"; status = "disabled"; }; @@ -667,7 +665,8 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0>, <0 0>; + freq-table-hz = <0 0 + 0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 12bc1d3ed424..81d09434c5c6 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -91,11 +91,10 @@ gmacphyrst: reset-controller { compatible = "ti,syscon-reset"; #reset-cells = <1>; - ti,reset-bits = - <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>, - <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>; + ti,reset-bits = < + 0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + 0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + >; }; }; @@ -217,8 +216,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x8b00000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysctrl HISTB_UART0_CLK>; - clock-names = "apb_pclk"; + clocks = <&sysctrl HISTB_UART0_CLK>, <&sysctrl HISTB_UART0_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -226,8 +225,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x8b02000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HISTB_UART2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HISTB_UART2_CLK>, <&crg HISTB_UART2_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -292,8 +291,8 @@ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; num-cs = <1>; cs-gpios = <&gpio7 1 0>; - clocks = <&crg HISTB_SPI0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HISTB_SPI0_CLK>, <&crg HISTB_SPI0_CLK>; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -305,7 +304,7 @@ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg HISTB_SDIO0_CIU_CLK>, <&crg HISTB_SDIO0_BIU_CLK>; - clock-names = "ciu", "biu"; + clock-names = "biu", "ciu"; resets = <&crg 0x9c 4>; reset-names = "reset"; status = "disabled"; @@ -585,7 +584,7 @@ status = "disabled"; }; - ohci: ohci@9880000 { + ohci: usb@9880000 { compatible = "generic-ohci"; reg = <0x9880000 0x10000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; @@ -600,7 +599,7 @@ status = "disabled"; }; - ehci: ehci@9890000 { + ehci: usb@9890000 { compatible = "generic-ehci"; reg = <0x9890000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 014735a9bc73..c6580c9f068e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -725,8 +725,8 @@ interrupts = <0 50 4>; bus-id = <0>; enable-dma = <0>; - clocks = <&sys_ctrl HI6220_SPI_CLK>; - clock-names = "apb_pclk"; + clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>; + clock-names = "sspclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; num-cs = <1>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index bc49955360db..405acaa3e9dd 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -242,28 +242,28 @@ <0x0 0xfe020000 0 0x10000>; /* GICV */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - its_peri: interrupt-controller@8c000000 { + its_peri: msi-controller@8c000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0x8c000000 0x0 0x40000>; }; - its_m3: interrupt-controller@a3000000 { + its_m3: msi-controller@a3000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0xa3000000 0x0 0x40000>; }; - its_pcie: interrupt-controller@b7000000 { + its_pcie: msi-controller@b7000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0xb7000000 0x0 0x40000>; }; - its_dsa: interrupt-controller@c6000000 { + its_dsa: msi-controller@c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; @@ -296,23 +296,23 @@ clock-frequency = <200000000>; }; - uart0: uart@80300000 { + uart0: serial@80300000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x80300000 0x0 0x10000>; interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&refclk200mhz>; - clock-names = "apb_pclk"; + clocks = <&refclk200mhz>, <&refclk200mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; - uart1: uart@80310000 { + uart1: serial@80310000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x80310000 0x0 0x10000>; interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&refclk200mhz>; - clock-names = "apb_pclk"; + clocks = <&refclk200mhz>, <&refclk200mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -335,7 +335,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -354,7 +354,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 50ceaa959bdc..7980709e21ff 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -242,7 +242,7 @@ <0x0 0xfe020000 0 0x10000>; /* GICV */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - its_dsa: interrupt-controller@c6000000 { + its_dsa: msi-controller@c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; @@ -330,7 +330,7 @@ * when iommu-map entry is used along with the PCIe node. * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html */ - smmu0: smmu_pcie { + smmu0: iommu@a0040000 { compatible = "arm,smmu-v3"; reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; @@ -359,7 +359,7 @@ status = "disabled"; }; - uart0: lpc-uart@2f8 { + uart0: serial@2f8 { compatible = "ns16550a"; clock-frequency = <1843200>; reg = <0x01 0x2f8 0x08>; @@ -373,7 +373,7 @@ #clock-cells = <0>; }; - usb_ohci: ohci@a7030000 { + usb_ohci: usb@a7030000 { compatible = "generic-ohci"; reg = <0x0 0xa7030000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; @@ -382,7 +382,7 @@ status = "disabled"; }; - usb_ehci: ehci@a7020000 { + usb_ehci: usb@a7020000 { compatible = "generic-ehci"; reg = <0x0 0xa7020000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; @@ -434,8 +434,8 @@ #size-cells = <0>; compatible = "hisilicon,hns-dsaf-v2"; mode = "6port-16rss"; - reg = <0x0 0xc5000000 0x0 0x890000 - 0x0 0xc7000000 0x0 0x600000>; + reg = <0x0 0xc5000000 0x0 0x890000>, + <0x0 0xc7000000 0x0 0x600000>; reg-names = "ppe-base", "dsaf-base"; interrupt-parent = <&mbigen_dsaf0>; subctrl-syscon = <&dsa_subctrl>; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 4773a533fce5..7832d9cdec21 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -924,56 +924,56 @@ <0x0 0xfe020000 0x0 0x10000>; /* GICV */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - p0_its_peri_a: interrupt-controller@4c000000 { + p0_its_peri_a: msi-controller@4c000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0x4c000000 0x0 0x40000>; }; - p0_its_peri_b: interrupt-controller@6c000000 { + p0_its_peri_b: msi-controller@6c000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0x6c000000 0x0 0x40000>; }; - p0_its_dsa_a: interrupt-controller@c6000000 { + p0_its_dsa_a: msi-controller@c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x0 0xc6000000 0x0 0x40000>; }; - p0_its_dsa_b: interrupt-controller@8,c6000000 { + p0_its_dsa_b: msi-controller@8c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x8 0xc6000000 0x0 0x40000>; }; - p1_its_peri_a: interrupt-controller@400,4c000000 { + p1_its_peri_a: msi-controller@4004c000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x400 0x4c000000 0x0 0x40000>; }; - p1_its_peri_b: interrupt-controller@400,6c000000 { + p1_its_peri_b: msi-controller@4006c000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x400 0x6c000000 0x0 0x40000>; }; - p1_its_dsa_a: interrupt-controller@400,c6000000 { + p1_its_dsa_a: msi-controller@400c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0x400 0xc6000000 0x0 0x40000>; }; - p1_its_dsa_b: interrupt-controller@408,c6000000 { + p1_its_dsa_b: msi-controller@408c6000000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; @@ -1161,7 +1161,7 @@ * when iommu-map entry is used along with the PCIe node. * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html */ - smmu0: smmu_pcie { + smmu0: iommu@a0040000 { compatible = "arm,smmu-v3"; reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; @@ -1170,7 +1170,7 @@ hisilicon,broken-prefetch-cmd; status = "disabled"; }; - p0_smmu_alg_a: smmu_alg@d0040000 { + p0_smmu_alg_a: iommu@d0040000 { compatible = "arm,smmu-v3"; reg = <0x0 0xd0040000 0x0 0x20000>; interrupt-parent = <&p0_mbigen_smmu_alg_a>; @@ -1183,7 +1183,7 @@ hisilicon,broken-prefetch-cmd; /* smmu-cb-memtype = <0x0 0x1>;*/ }; - p0_smmu_alg_b: smmu_alg@8,d0040000 { + p0_smmu_alg_b: iommu@8d0040000 { compatible = "arm,smmu-v3"; reg = <0x8 0xd0040000 0x0 0x20000>; interrupt-parent = <&p0_mbigen_smmu_alg_b>; @@ -1196,7 +1196,7 @@ hisilicon,broken-prefetch-cmd; /* smmu-cb-memtype = <0x0 0x1>;*/ }; - p1_smmu_alg_a: smmu_alg@400,d0040000 { + p1_smmu_alg_a: iommu@400d0040000 { compatible = "arm,smmu-v3"; reg = <0x400 0xd0040000 0x0 0x20000>; interrupt-parent = <&p1_mbigen_smmu_alg_a>; @@ -1209,7 +1209,7 @@ hisilicon,broken-prefetch-cmd; /* smmu-cb-memtype = <0x0 0x1>;*/ }; - p1_smmu_alg_b: smmu_alg@408,d0040000 { + p1_smmu_alg_b: iommu@408d0040000 { compatible = "arm,smmu-v3"; reg = <0x408 0xd0040000 0x0 0x20000>; interrupt-parent = <&p1_mbigen_smmu_alg_b>; @@ -1253,7 +1253,7 @@ status = "disabled"; }; - usb_ohci: ohci@a7030000 { + usb_ohci: usb@a7030000 { compatible = "generic-ohci"; reg = <0x0 0xa7030000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; @@ -1262,7 +1262,7 @@ status = "disabled"; }; - usb_ehci: ehci@a7020000 { + usb_ehci: usb@a7020000 { compatible = "generic-ehci"; reg = <0x0 0xa7020000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; @@ -1321,8 +1321,8 @@ #size-cells = <0>; compatible = "hisilicon,hns-dsaf-v2"; mode = "6port-16rss"; - reg = <0x0 0xc5000000 0x0 0x890000 - 0x0 0xc7000000 0x0 0x600000>; + reg = <0x0 0xc5000000 0x0 0x890000>, + <0x0 0xc7000000 0x0 0x600000>; reg-names = "ppe-base", "dsaf-base"; interrupt-parent = <&mbigen_dsaf0>; subctrl-syscon = <&dsa_subctrl>; @@ -1720,24 +1720,24 @@ }; p0_sec_a: crypto@d2000000 { compatible = "hisilicon,hip07-sec"; - reg = <0x0 0xd0000000 0x0 0x10000 - 0x0 0xd2000000 0x0 0x10000 - 0x0 0xd2010000 0x0 0x10000 - 0x0 0xd2020000 0x0 0x10000 - 0x0 0xd2030000 0x0 0x10000 - 0x0 0xd2040000 0x0 0x10000 - 0x0 0xd2050000 0x0 0x10000 - 0x0 0xd2060000 0x0 0x10000 - 0x0 0xd2070000 0x0 0x10000 - 0x0 0xd2080000 0x0 0x10000 - 0x0 0xd2090000 0x0 0x10000 - 0x0 0xd20a0000 0x0 0x10000 - 0x0 0xd20b0000 0x0 0x10000 - 0x0 0xd20c0000 0x0 0x10000 - 0x0 0xd20d0000 0x0 0x10000 - 0x0 0xd20e0000 0x0 0x10000 - 0x0 0xd20f0000 0x0 0x10000 - 0x0 0xd2100000 0x0 0x10000>; + reg = <0x0 0xd0000000 0x0 0x10000>, + <0x0 0xd2000000 0x0 0x10000>, + <0x0 0xd2010000 0x0 0x10000>, + <0x0 0xd2020000 0x0 0x10000>, + <0x0 0xd2030000 0x0 0x10000>, + <0x0 0xd2040000 0x0 0x10000>, + <0x0 0xd2050000 0x0 0x10000>, + <0x0 0xd2060000 0x0 0x10000>, + <0x0 0xd2070000 0x0 0x10000>, + <0x0 0xd2080000 0x0 0x10000>, + <0x0 0xd2090000 0x0 0x10000>, + <0x0 0xd20a0000 0x0 0x10000>, + <0x0 0xd20b0000 0x0 0x10000>, + <0x0 0xd20c0000 0x0 0x10000>, + <0x0 0xd20d0000 0x0 0x10000>, + <0x0 0xd20e0000 0x0 0x10000>, + <0x0 0xd20f0000 0x0 0x10000>, + <0x0 0xd2100000 0x0 0x10000>; interrupt-parent = <&p0_mbigen_sec_a>; iommus = <&p0_smmu_alg_a 0x600>; dma-coherent; @@ -1761,24 +1761,24 @@ }; p0_sec_b: crypto@8,d2000000 { compatible = "hisilicon,hip07-sec"; - reg = <0x8 0xd0000000 0x0 0x10000 - 0x8 0xd2000000 0x0 0x10000 - 0x8 0xd2010000 0x0 0x10000 - 0x8 0xd2020000 0x0 0x10000 - 0x8 0xd2030000 0x0 0x10000 - 0x8 0xd2040000 0x0 0x10000 - 0x8 0xd2050000 0x0 0x10000 - 0x8 0xd2060000 0x0 0x10000 - 0x8 0xd2070000 0x0 0x10000 - 0x8 0xd2080000 0x0 0x10000 - 0x8 0xd2090000 0x0 0x10000 - 0x8 0xd20a0000 0x0 0x10000 - 0x8 0xd20b0000 0x0 0x10000 - 0x8 0xd20c0000 0x0 0x10000 - 0x8 0xd20d0000 0x0 0x10000 - 0x8 0xd20e0000 0x0 0x10000 - 0x8 0xd20f0000 0x0 0x10000 - 0x8 0xd2100000 0x0 0x10000>; + reg = <0x8 0xd0000000 0x0 0x10000>, + <0x8 0xd2000000 0x0 0x10000>, + <0x8 0xd2010000 0x0 0x10000>, + <0x8 0xd2020000 0x0 0x10000>, + <0x8 0xd2030000 0x0 0x10000>, + <0x8 0xd2040000 0x0 0x10000>, + <0x8 0xd2050000 0x0 0x10000>, + <0x8 0xd2060000 0x0 0x10000>, + <0x8 0xd2070000 0x0 0x10000>, + <0x8 0xd2080000 0x0 0x10000>, + <0x8 0xd2090000 0x0 0x10000>, + <0x8 0xd20a0000 0x0 0x10000>, + <0x8 0xd20b0000 0x0 0x10000>, + <0x8 0xd20c0000 0x0 0x10000>, + <0x8 0xd20d0000 0x0 0x10000>, + <0x8 0xd20e0000 0x0 0x10000>, + <0x8 0xd20f0000 0x0 0x10000>, + <0x8 0xd2100000 0x0 0x10000>; interrupt-parent = <&p0_mbigen_sec_b>; iommus = <&p0_smmu_alg_b 0x600>; dma-coherent; @@ -1802,24 +1802,24 @@ }; p1_sec_a: crypto@400,d2000000 { compatible = "hisilicon,hip07-sec"; - reg = <0x400 0xd0000000 0x0 0x10000 - 0x400 0xd2000000 0x0 0x10000 - 0x400 0xd2010000 0x0 0x10000 - 0x400 0xd2020000 0x0 0x10000 - 0x400 0xd2030000 0x0 0x10000 - 0x400 0xd2040000 0x0 0x10000 - 0x400 0xd2050000 0x0 0x10000 - 0x400 0xd2060000 0x0 0x10000 - 0x400 0xd2070000 0x0 0x10000 - 0x400 0xd2080000 0x0 0x10000 - 0x400 0xd2090000 0x0 0x10000 - 0x400 0xd20a0000 0x0 0x10000 - 0x400 0xd20b0000 0x0 0x10000 - 0x400 0xd20c0000 0x0 0x10000 - 0x400 0xd20d0000 0x0 0x10000 - 0x400 0xd20e0000 0x0 0x10000 - 0x400 0xd20f0000 0x0 0x10000 - 0x400 0xd2100000 0x0 0x10000>; + reg = <0x400 0xd0000000 0x0 0x10000>, + <0x400 0xd2000000 0x0 0x10000>, + <0x400 0xd2010000 0x0 0x10000>, + <0x400 0xd2020000 0x0 0x10000>, + <0x400 0xd2030000 0x0 0x10000>, + <0x400 0xd2040000 0x0 0x10000>, + <0x400 0xd2050000 0x0 0x10000>, + <0x400 0xd2060000 0x0 0x10000>, + <0x400 0xd2070000 0x0 0x10000>, + <0x400 0xd2080000 0x0 0x10000>, + <0x400 0xd2090000 0x0 0x10000>, + <0x400 0xd20a0000 0x0 0x10000>, + <0x400 0xd20b0000 0x0 0x10000>, + <0x400 0xd20c0000 0x0 0x10000>, + <0x400 0xd20d0000 0x0 0x10000>, + <0x400 0xd20e0000 0x0 0x10000>, + <0x400 0xd20f0000 0x0 0x10000>, + <0x400 0xd2100000 0x0 0x10000>; interrupt-parent = <&p1_mbigen_sec_a>; iommus = <&p1_smmu_alg_a 0x600>; dma-coherent; @@ -1843,24 +1843,24 @@ }; p1_sec_b: crypto@408,d2000000 { compatible = "hisilicon,hip07-sec"; - reg = <0x408 0xd0000000 0x0 0x10000 - 0x408 0xd2000000 0x0 0x10000 - 0x408 0xd2010000 0x0 0x10000 - 0x408 0xd2020000 0x0 0x10000 - 0x408 0xd2030000 0x0 0x10000 - 0x408 0xd2040000 0x0 0x10000 - 0x408 0xd2050000 0x0 0x10000 - 0x408 0xd2060000 0x0 0x10000 - 0x408 0xd2070000 0x0 0x10000 - 0x408 0xd2080000 0x0 0x10000 - 0x408 0xd2090000 0x0 0x10000 - 0x408 0xd20a0000 0x0 0x10000 - 0x408 0xd20b0000 0x0 0x10000 - 0x408 0xd20c0000 0x0 0x10000 - 0x408 0xd20d0000 0x0 0x10000 - 0x408 0xd20e0000 0x0 0x10000 - 0x408 0xd20f0000 0x0 0x10000 - 0x408 0xd2100000 0x0 0x10000>; + reg = <0x408 0xd0000000 0x0 0x10000>, + <0x408 0xd2000000 0x0 0x10000>, + <0x408 0xd2010000 0x0 0x10000>, + <0x408 0xd2020000 0x0 0x10000>, + <0x408 0xd2030000 0x0 0x10000>, + <0x408 0xd2040000 0x0 0x10000>, + <0x408 0xd2050000 0x0 0x10000>, + <0x408 0xd2060000 0x0 0x10000>, + <0x408 0xd2070000 0x0 0x10000>, + <0x408 0xd2080000 0x0 0x10000>, + <0x408 0xd2090000 0x0 0x10000>, + <0x408 0xd20a0000 0x0 0x10000>, + <0x408 0xd20b0000 0x0 0x10000>, + <0x408 0xd20c0000 0x0 0x10000>, + <0x408 0xd20d0000 0x0 0x10000>, + <0x408 0xd20e0000 0x0 0x10000>, + <0x408 0xd20f0000 0x0 0x10000>, + <0x408 0xd2100000 0x0 0x10000>; interrupt-parent = <&p1_mbigen_sec_b>; iommus = <&p1_smmu_alg_b 0x600>; dma-coherent; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 3e5f2e7a040c..34efe0fb6f37 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb @@ -12,6 +13,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts index ec72a11ed80f..5c4d8f379704 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -21,24 +21,6 @@ "marvell,armada3720", "marvell,armada3710"; }; -/* U11 */ &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts new file mode 100644 index 000000000000..c5eb3604dd5b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for ESPRESSObin-Ultra board. + * Copyright (C) 2019 Globalscale technologies, Inc. + * + * Jason Hung <jhung@globalscaletechnologies.com> + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; + compatible = "globalscale,espressobin-ultra", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + /* ethernet1 is WAN port */ + ethernet1 = &switch0port5; + ethernet2 = &switch0port1; + ethernet3 = &switch0port2; + ethernet4 = &switch0port3; + ethernet5 = &switch0port4; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + + gpio-leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + /* No assigned functions to the LEDs by default */ + led1 { + label = "ebin-ultra:blue:led1"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + led2 { + label = "ebin-ultra:green:led2"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + led3 { + label = "ebin-ultra:red:led3"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + led4 { + label = "ebin-ultra:yellow:led4"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + status = "disabled"; +}; + +&spi0 { + flash@0 { + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + }; + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&usb3 { + usb-phy = <&usb3_phy>; + status = "disabled"; +}; + +&mdio { + extphy: ethernet-phy@1 { + reg = <1>; + }; +}; + +&switch0 { + reg = <3>; + + ports { + switch0port1: port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&switch0phy0>; + }; + + switch0port2: port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + switch0port4: port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + switch0port5: port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&extphy>; + phy-mode = "sgmii"; + }; + }; + + mdio { + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 215d2f702623..75401eab4d42 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; @@ -28,40 +28,18 @@ }; }; -&switch0 { - ports { - switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; +&switch0port1 { + label = "lan1"; +}; - switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; - }; +&switch0port3 { + label = "wan"; }; -/* U11 */ &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; +}; - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; +&led2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index b6f4af8ebafb..48a7f50fb427 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; @@ -27,18 +27,14 @@ }; }; -&switch0 { - ports { - switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; +&switch0port1 { + label = "lan1"; +}; - switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; - }; +&switch0port3 { + label = "wan"; +}; + +&led2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 0775c16e0ec8..daffe136c523 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -17,8 +17,6 @@ ethernet1 = &switch0port1; ethernet2 = &switch0port2; ethernet3 = &switch0port3; - serial0 = &uart0; - serial1 = &uart1; }; chosen { @@ -43,6 +41,19 @@ 3300000 0x0>; enable-active-high; }; + + led2: gpio-led2 { + /* led2 is working only on v7 board */ + status = "disabled"; + + compatible = "gpio-leds"; + + led2 { + label = "led2"; + gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; /* J9 */ @@ -60,6 +71,30 @@ phy-names = "sata-phy"; }; +/* U11 */ +&sdhci0 { + /* Main DTS file for Espressobin is without eMMC */ + status = "disabled"; + + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + /* J1 */ &sdhci1 { wp-inverted; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index f3a678e0fd99..f5ec3b644769 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -102,6 +102,7 @@ mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; /* enabled by U-Boot if SFP module is present */ status = "disabled"; @@ -146,7 +147,7 @@ pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index 7a3198cd7a07..2f440711d21d 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -15,10 +15,6 @@ "marvell,armada-ap806"; }; -&smmu { - status = "okay"; -}; - &cp0_pcie0 { iommu-map = <0x0 &smmu 0x480 0x20>, diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts index 2e6832d02a59..411d20064271 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts @@ -5,6 +5,8 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ +#include <dt-bindings/leds/common.h> + #include "armada-8040-mcbin.dtsi" / { @@ -12,6 +14,19 @@ compatible = "marvell,armada8040-mcbin-singleshot", "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led18_pins>; + pinctrl-names = "default"; + + led18 { + gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "heartbeat"; + }; + }; }; &cp0_eth0 { @@ -27,3 +42,10 @@ managed = "in-band-status"; sfp = <&sfp_eth1>; }; + +&cp0_pinctrl { + cp0_led18_pins: led18-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts new file mode 100644 index 000000000000..dac85fa748de --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2020 Sartura Ltd. + * + * Device Tree file for IEI Puzzle-M801 + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "IEI-Puzzle-M801"; + compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp0_eth1; + ethernet3 = &cp0_eth2; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus0_i2c>; + los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + sfp_cp1_eth0: sfp-cp1-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus1_i2c>; + los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; + pinctrl-names = "default"; + + led-0 { + /* SFP+ port 2: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* SFP+ port 1: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* SFP+ port 2: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* SFP+ port 2: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* SFP+ port 1: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* SFP+ port 1: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + linux,default-trigger = "disk-activity"; + gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&ap_thermal_cpu1 { + trips { + cpu_active: cpu-active { + temperature = <44000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + fan-map { + trip = <&cpu_active>; + cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, + <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8010"; + reg = <0x32>; + }; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x001f0000>; + }; + partition@u-boot-env { + label = "u-boot-env"; + reg = <0x001f0000 0x00010000>; + }; + partition@ubi1 { + label = "ubi1"; + reg = <0x00200000 0x03f00000>; + }; + partition@ubi2 { + label = "ubi2"; + reg = <0x04100000 0x03f00000>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + status = "okay"; + /* IEI WT61P803 PUZZLE MCU Controller */ + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + #address-cells = <1>; + #size-cells = <0>; + + chassis_fan_group0:fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + chassis_fan_group1:fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; +}; + +&cp0_rtc { + status = "disabled"; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + + sfpplus_gpio: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpplus0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfpplus1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy2: ethernet-phy@0 { + reg = <0>; + }; + + ge_phy3: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <1>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 00]; + sfp = <&sfp_cp0_eth0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&ge_phy2>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 01]; + phys = <&cp0_comphy3 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "sgmii"; + phys = <&cp0_comphy1 2>; + local-mac-address = [ae 00 00 00 ff 02]; + phy = <&ge_phy3>; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_i2c0 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_i2c1 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp1_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 03]; + sfp = <&sfp_cp1_eth0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy = <&ge_phy4>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 04]; + phys = <&cp1_comphy3 1>; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 05]; + phys = <&cp1_comphy5 2>; + phy = <&ge_phy5>; +}; + +&cp1_pinctrl { + cp1_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; + marvell,function = "gpio"; + }; +}; + +&cp1_uart0 { + status = "disabled"; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; + +&cp1_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy4: ethernet-phy@1 { + reg = <1>; + }; + ge_phy5: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp1_pcie0 { + num-lanes = <2>; + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 79e8ce59baa8..22c2d6ebf381 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -15,10 +15,6 @@ "marvell,armada-ap806"; }; -&smmu { - status = "okay"; -}; - &cp0_pcie0 { iommu-map = <0x0 &smmu 0x480 0x20>, diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 9dcf16beabf5..994a2fce449a 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -275,7 +275,7 @@ }; }; - CP11X_LABEL(usb3_0): usb3@500000 { + CP11X_LABEL(usb3_0): usb@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x500000 0x4000>; @@ -287,7 +287,7 @@ status = "disabled"; }; - CP11X_LABEL(usb3_1): usb3@510000 { + CP11X_LABEL(usb3_1): usb@510000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x510000 0x4000>; @@ -300,11 +300,9 @@ }; CP11X_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; + compatible = "marvell,armada-8k-ahci"; reg = <0x540000 0x30000>; dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP11X_LABEL(clk) 1 15>, <&CP11X_LABEL(clk) 1 16>; #address-cells = <1>; @@ -312,10 +310,12 @@ status = "disabled"; sata-port@0 { + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; reg = <0>; }; sata-port@1 { + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 3ee682c266cc..18f7b46c4095 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -1,15 +1,18 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts new file mode 100644 index 000000000000..164f5cbb3821 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + */ + +/dts-v1/; +#include "mt6779.dtsi" + +/ { + model = "MediaTek MT6779 EVB"; + compatible = "mediatek,mt6779-evb", "mediatek,mt6779"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x1e800000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi new file mode 100644 index 000000000000..370f309d32de --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + */ + +#include <dt-bindings/clock/mt6779-clk.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h> + +/ { + compatible = "mediatek,mt6779"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x100>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x200>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x300>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x400>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + reg = <0x500>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a75"; + enable-method = "psci"; + reg = <0x600>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a75"; + enable-method = "psci"; + reg = <0x700>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>; + }; + + clk26m: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@0c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c040000 0 0x200000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 \ + &cpu2 &cpu3 &cpu4 &cpu5>; + }; + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + + }; + + sysirq: intpol-controller@0c53a650 { + compatible = "mediatek,mt6779-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x0c53a650 0 0x50>; + }; + + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt6779-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: clock-controller@10001000 { + compatible = "mediatek,mt6779-infracfg_ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6779-pinctrl", "syscon"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c20000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rm", + "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", + "iocfg_lt", "iocfg_tl", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 210>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + }; + + apmixed: clock-controller@1000c000 { + compatible = "mediatek,mt6779-apmixed", "syscon"; + reg = <0 0x1000c000 0 0xe00>; + #clock-cells = <1>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt6779-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6779-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt6779-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + audio: clock-controller@11210000 { + compatible = "mediatek,mt6779-audio", "syscon"; + reg = <0 0x11210000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt6779-mfgcfg", "syscon"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt6779-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15020000 { + compatible = "mediatek,mt6779-imgsys", "syscon"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt6779-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@17000000 { + compatible = "mediatek,mt6779-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@1a000000 { + compatible = "mediatek,mt6779-camsys", "syscon"; + reg = <0 0x1a000000 0 0x10000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@1b000000 { + compatible = "mediatek,mt6779-ipesys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 9a11e5c60c26..2f77dc40b9b8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -412,10 +412,15 @@ }; }; - pwm7_pins: pwm1-2-pins { + pwm_pins: pwm-pins { mux { function = "pwm"; - groups = "pwm_ch7_2"; + groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */ + "pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */ + "pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */ + "pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */ + "pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */ + "pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */ }; }; @@ -535,7 +540,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm7_pins>; + pinctrl-0 = <&pwm_pins>; status = "okay"; }; @@ -563,7 +568,6 @@ &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spic1_pins>; - status = "okay"; }; &ssusb { @@ -585,7 +589,6 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; - status = "okay"; }; &watchdog { diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h new file mode 100644 index 000000000000..061c3255a973 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h @@ -0,0 +1,744 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + */ +#ifndef __DTS_MT8167_PINFUNC_H +#define __DTS_MT8167_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT8167_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8167_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1) +#define MT8167_PIN_0_EINT0__FUNC_DPI_CK (MTK_PIN_NO(0) | 2) +#define MT8167_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3) +#define MT8167_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4) +#define MT8167_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6) +#define MT8167_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7) + +#define MT8167_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8167_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1) +#define MT8167_PIN_1_EINT1__FUNC_DPI_D12 (MTK_PIN_NO(1) | 2) +#define MT8167_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3) +#define MT8167_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4) +#define MT8167_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5) +#define MT8167_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6) +#define MT8167_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7) + +#define MT8167_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8167_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1) +#define MT8167_PIN_2_EINT2__FUNC_DPI_D13 (MTK_PIN_NO(2) | 2) +#define MT8167_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3) +#define MT8167_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4) +#define MT8167_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5) +#define MT8167_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6) +#define MT8167_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7) + +#define MT8167_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8167_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1) +#define MT8167_PIN_3_EINT3__FUNC_DPI_D14 (MTK_PIN_NO(3) | 2) +#define MT8167_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3) +#define MT8167_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4) +#define MT8167_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5) +#define MT8167_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6) +#define MT8167_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7) + +#define MT8167_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8167_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1) +#define MT8167_PIN_4_EINT4__FUNC_DPI_D15 (MTK_PIN_NO(4) | 2) +#define MT8167_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3) +#define MT8167_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4) +#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5) +#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6) +#define MT8167_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7) + +#define MT8167_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8167_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1) +#define MT8167_PIN_5_EINT5__FUNC_DPI_D16 (MTK_PIN_NO(5) | 2) +#define MT8167_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3) +#define MT8167_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4) +#define MT8167_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5) +#define MT8167_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6) +#define MT8167_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7) + +#define MT8167_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8167_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1) +#define MT8167_PIN_6_EINT6__FUNC_DPI_D17 (MTK_PIN_NO(6) | 2) +#define MT8167_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3) +#define MT8167_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4) +#define MT8167_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5) +#define MT8167_PIN_6_EINT6__FUNC_MM_TEST_CK (MTK_PIN_NO(6) | 6) +#define MT8167_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7) + +#define MT8167_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8167_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1) +#define MT8167_PIN_7_EINT7__FUNC_DPI_D6 (MTK_PIN_NO(7) | 2) +#define MT8167_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3) +#define MT8167_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4) +#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5) +#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6) +#define MT8167_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7) + +#define MT8167_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8167_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1) +#define MT8167_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2) +#define MT8167_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3) +#define MT8167_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4) +#define MT8167_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5) +#define MT8167_PIN_8_EINT8__FUNC_DPI_D7 (MTK_PIN_NO(8) | 6) +#define MT8167_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7) + +#define MT8167_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8167_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1) +#define MT8167_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2) +#define MT8167_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT8167_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4) +#define MT8167_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5) +#define MT8167_PIN_9_EINT9__FUNC_DPI_D8 (MTK_PIN_NO(9) | 6) +#define MT8167_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7) + +#define MT8167_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8167_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1) +#define MT8167_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2) +#define MT8167_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3) +#define MT8167_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4) +#define MT8167_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5) +#define MT8167_PIN_10_EINT10__FUNC_DPI_D9 (MTK_PIN_NO(10) | 6) +#define MT8167_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7) + +#define MT8167_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8167_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1) +#define MT8167_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2) +#define MT8167_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3) +#define MT8167_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4) +#define MT8167_PIN_11_EINT11__FUNC_DPI_D10 (MTK_PIN_NO(11) | 5) +#define MT8167_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6) +#define MT8167_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7) + +#define MT8167_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8167_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1) +#define MT8167_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2) +#define MT8167_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3) +#define MT8167_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4) +#define MT8167_PIN_12_EINT12__FUNC_DPI_D11 (MTK_PIN_NO(12) | 5) +#define MT8167_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6) +#define MT8167_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7) + +#define MT8167_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8167_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3) +#define MT8167_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4) +#define MT8167_PIN_13_EINT13__FUNC_DPI_D0 (MTK_PIN_NO(13) | 5) +#define MT8167_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6) +#define MT8167_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7) + +#define MT8167_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8167_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2) +#define MT8167_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3) +#define MT8167_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4) +#define MT8167_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5) +#define MT8167_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6) +#define MT8167_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7) + +#define MT8167_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8167_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2) +#define MT8167_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3) +#define MT8167_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4) +#define MT8167_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5) +#define MT8167_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6) +#define MT8167_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7) + +#define MT8167_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8167_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2) +#define MT8167_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3) +#define MT8167_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4) +#define MT8167_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5) +#define MT8167_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6) +#define MT8167_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7) + +#define MT8167_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8167_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2) +#define MT8167_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3) +#define MT8167_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4) +#define MT8167_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5) +#define MT8167_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6) +#define MT8167_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7) + +#define MT8167_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8167_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2) +#define MT8167_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3) +#define MT8167_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4) +#define MT8167_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5) +#define MT8167_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6) +#define MT8167_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7) + +#define MT8167_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8167_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1) +#define MT8167_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2) +#define MT8167_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3) +#define MT8167_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4) +#define MT8167_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5) +#define MT8167_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6) +#define MT8167_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7) + +#define MT8167_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8167_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1) +#define MT8167_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3) +#define MT8167_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4) +#define MT8167_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5) +#define MT8167_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6) +#define MT8167_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7) + +#define MT8167_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8167_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1) +#define MT8167_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2) +#define MT8167_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3) +#define MT8167_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7) + +#define MT8167_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8167_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2) +#define MT8167_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3) +#define MT8167_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4) +#define MT8167_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5) +#define MT8167_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6) +#define MT8167_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7) + +#define MT8167_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8167_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2) +#define MT8167_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3) +#define MT8167_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4) +#define MT8167_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5) +#define MT8167_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6) +#define MT8167_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7) + +#define MT8167_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8167_PIN_24_EINT24__FUNC_DPI_D20 (MTK_PIN_NO(24) | 1) +#define MT8167_PIN_24_EINT24__FUNC_DPI_DE (MTK_PIN_NO(24) | 2) +#define MT8167_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3) +#define MT8167_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4) +#define MT8167_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5) +#define MT8167_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6) +#define MT8167_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7) + +#define MT8167_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8167_PIN_25_EINT25__FUNC_DPI_D19 (MTK_PIN_NO(25) | 1) +#define MT8167_PIN_25_EINT25__FUNC_DPI_VSYNC (MTK_PIN_NO(25) | 2) +#define MT8167_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3) +#define MT8167_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4) +#define MT8167_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5) +#define MT8167_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6) +#define MT8167_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7) + +#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1) +#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2) + +#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1) +#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2) + +#define MT8167_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1) +#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4) +#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5) +#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6) + +#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1) + +#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1) + +#define MT8167_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8167_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1) + +#define MT8167_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8167_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1) + +#define MT8167_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8167_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1) + +#define MT8167_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8167_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1) +#define MT8167_PIN_34_URXD2__FUNC_DPI_D5 (MTK_PIN_NO(34) | 2) +#define MT8167_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3) +#define MT8167_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4) +#define MT8167_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6) +#define MT8167_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7) + +#define MT8167_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8167_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1) +#define MT8167_PIN_35_UTXD2__FUNC_DPI_HSYNC (MTK_PIN_NO(35) | 2) +#define MT8167_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3) +#define MT8167_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4) +#define MT8167_PIN_35_UTXD2__FUNC_DPI_D18 (MTK_PIN_NO(35) | 5) +#define MT8167_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6) +#define MT8167_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7) + +#define MT8167_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8167_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1) +#define MT8167_PIN_36_MRG_CLK__FUNC_DPI_D4 (MTK_PIN_NO(36) | 2) +#define MT8167_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3) +#define MT8167_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4) +#define MT8167_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5) +#define MT8167_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6) +#define MT8167_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7) + +#define MT8167_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8167_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1) +#define MT8167_PIN_37_MRG_SYNC__FUNC_DPI_D3 (MTK_PIN_NO(37) | 2) +#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3) +#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4) +#define MT8167_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5) +#define MT8167_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6) +#define MT8167_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7) + +#define MT8167_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8167_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1) +#define MT8167_PIN_38_MRG_DI__FUNC_DPI_D1 (MTK_PIN_NO(38) | 2) +#define MT8167_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3) +#define MT8167_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4) +#define MT8167_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5) +#define MT8167_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6) +#define MT8167_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7) + +#define MT8167_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8167_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1) +#define MT8167_PIN_39_MRG_DO__FUNC_DPI_D2 (MTK_PIN_NO(39) | 2) +#define MT8167_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3) +#define MT8167_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4) +#define MT8167_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5) +#define MT8167_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6) +#define MT8167_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7) + +#define MT8167_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8167_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1) +#define MT8167_PIN_40_KPROW0__FUNC_IMG_TEST_CK (MTK_PIN_NO(40) | 4) +#define MT8167_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7) + +#define MT8167_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8167_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1) +#define MT8167_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2) +#define MT8167_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3) +#define MT8167_PIN_41_KPROW1__FUNC_MFG_TEST_CK (MTK_PIN_NO(41) | 4) +#define MT8167_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7) + +#define MT8167_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8167_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1) +#define MT8167_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7) + +#define MT8167_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8167_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1) +#define MT8167_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2) +#define MT8167_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3) +#define MT8167_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4) +#define MT8167_PIN_43_KPCOL1__FUNC_DFD_NTRST_XI (MTK_PIN_NO(43) | 5) +#define MT8167_PIN_43_KPCOL1__FUNC_UDI_NTRST_XI (MTK_PIN_NO(43) | 6) +#define MT8167_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7) + +#define MT8167_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8167_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1) +#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2) +#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3) +#define MT8167_PIN_44_JTMS__FUNC_GPUDFD_TMS_XI (MTK_PIN_NO(44) | 4) +#define MT8167_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5) +#define MT8167_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6) + +#define MT8167_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8167_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1) +#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2) +#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3) +#define MT8167_PIN_45_JTCK__FUNC_GPUDFD_TCK_XI (MTK_PIN_NO(45) | 4) +#define MT8167_PIN_45_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(45) | 5) +#define MT8167_PIN_45_JTCK__FUNC_UDI_TCK_XI (MTK_PIN_NO(45) | 6) + +#define MT8167_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8167_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1) +#define MT8167_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2) +#define MT8167_PIN_46_JTDI__FUNC_GPUDFD_TDI_XI (MTK_PIN_NO(46) | 4) +#define MT8167_PIN_46_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(46) | 5) +#define MT8167_PIN_46_JTDI__FUNC_UDI_TDI_XI (MTK_PIN_NO(46) | 6) + +#define MT8167_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8167_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1) +#define MT8167_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2) +#define MT8167_PIN_47_JTDO__FUNC_GPUDFD_TDO (MTK_PIN_NO(47) | 4) +#define MT8167_PIN_47_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(47) | 5) +#define MT8167_PIN_47_JTDO__FUNC_UDI_TDO (MTK_PIN_NO(47) | 6) + +#define MT8167_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8167_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1) +#define MT8167_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3) +#define MT8167_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4) +#define MT8167_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7) + +#define MT8167_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8167_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1) +#define MT8167_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3) +#define MT8167_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4) +#define MT8167_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7) + +#define MT8167_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1) +#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2) +#define MT8167_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3) +#define MT8167_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4) +#define MT8167_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7) + +#define MT8167_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1) +#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2) +#define MT8167_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3) +#define MT8167_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4) +#define MT8167_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7) + +#define MT8167_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8167_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1) + +#define MT8167_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8167_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1) + +#define MT8167_PIN_54_DISP_PWM__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8167_PIN_54_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(54) | 1) +#define MT8167_PIN_54_DISP_PWM__FUNC_PWM_B (MTK_PIN_NO(54) | 2) +#define MT8167_PIN_54_DISP_PWM__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7) + +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6) +#define MT8167_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7) + +#define MT8167_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1) +#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3) +#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4) +#define MT8167_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5) +#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6) +#define MT8167_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7) + +#define MT8167_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8167_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1) +#define MT8167_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2) +#define MT8167_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3) +#define MT8167_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4) +#define MT8167_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5) +#define MT8167_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6) +#define MT8167_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7) + +#define MT8167_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8167_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1) + +#define MT8167_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8167_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1) + +#define MT8167_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8167_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1) +#define MT8167_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2) + +#define MT8167_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8167_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1) +#define MT8167_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2) + +#define MT8167_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8167_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1) +#define MT8167_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2) + +#define MT8167_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8167_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1) +#define MT8167_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2) + +#define MT8167_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8167_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1) +#define MT8167_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2) +#define MT8167_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7) + +#define MT8167_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8167_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1) +#define MT8167_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2) +#define MT8167_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7) + +#define MT8167_PIN_66_LCM_RST__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT8167_PIN_66_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(66) | 1) +#define MT8167_PIN_66_LCM_RST__FUNC_I2S0_MCK (MTK_PIN_NO(66) | 3) +#define MT8167_PIN_66_LCM_RST__FUNC_DBG_MON_B_3 (MTK_PIN_NO(66) | 7) + +#define MT8167_PIN_67_DSI_TE__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT8167_PIN_67_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(67) | 1) +#define MT8167_PIN_67_DSI_TE__FUNC_I2S_8CH_MCK (MTK_PIN_NO(67) | 3) +#define MT8167_PIN_67_DSI_TE__FUNC_DBG_MON_B_14 (MTK_PIN_NO(67) | 7) + +#define MT8167_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6) +#define MT8167_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7) + +#define MT8167_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_DPI_D21 (MTK_PIN_NO(69) | 4) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6) +#define MT8167_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7) + +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DPI_D22 (MTK_PIN_NO(70) | 4) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6) +#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7) + +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6) +#define MT8167_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7) + +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DPI_D23 (MTK_PIN_NO(72) | 4) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6) +#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7) + +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6) +#define MT8167_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7) + +#define MT8167_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0) +#define MT8167_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1) + +#define MT8167_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0) +#define MT8167_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1) + +#define MT8167_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0) +#define MT8167_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1) + +#define MT8167_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0) +#define MT8167_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1) + +#define MT8167_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0) +#define MT8167_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1) + +#define MT8167_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0) +#define MT8167_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1) + +#define MT8167_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0) +#define MT8167_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1) + +#define MT8167_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0) +#define MT8167_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1) + +#define MT8167_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0) +#define MT8167_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1) + +#define MT8167_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0) +#define MT8167_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1) + +#define MT8167_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0) +#define MT8167_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1) + +#define MT8167_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0) +#define MT8167_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1) + +#define MT8167_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0) +#define MT8167_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1) + +#define MT8167_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0) +#define MT8167_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1) + +#define MT8167_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0) +#define MT8167_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1) + +#define MT8167_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0) +#define MT8167_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1) + +#define MT8167_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0) +#define MT8167_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1) +#define MT8167_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2) + +#define MT8167_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT8167_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1) +#define MT8167_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2) + +#define MT8167_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT8167_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1) +#define MT8167_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2) + +#define MT8167_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT8167_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1) +#define MT8167_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2) + +#define MT8167_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT8167_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1) +#define MT8167_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2) + +#define MT8167_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT8167_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1) +#define MT8167_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2) + +#define MT8167_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT8167_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1) +#define MT8167_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2) +#define MT8167_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3) + +#define MT8167_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT8167_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1) +#define MT8167_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2) +#define MT8167_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3) + +#define MT8167_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT8167_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1) +#define MT8167_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2) + +#define MT8167_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT8167_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1) +#define MT8167_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2) + +#define MT8167_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8167_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1) +#define MT8167_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2) +#define MT8167_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3) +#define MT8167_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5) +#define MT8167_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7) + +#define MT8167_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8167_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1) +#define MT8167_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2) +#define MT8167_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3) +#define MT8167_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4) +#define MT8167_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5) +#define MT8167_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7) + +#define MT8167_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8167_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1) +#define MT8167_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3) +#define MT8167_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5) +#define MT8167_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7) + +#define MT8167_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8167_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1) +#define MT8167_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2) +#define MT8167_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3) +#define MT8167_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5) +#define MT8167_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7) + +#define MT8167_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8167_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1) +#define MT8167_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4) +#define MT8167_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7) + +#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_UDI_NTRST_XI (MTK_PIN_NO(105) | 2) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_DFD_NTRST_XI (MTK_PIN_NO(105) | 3) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPUEJ_NTRST_XI (MTK_PIN_NO(105) | 5) +#define MT8167_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7) + +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_UDI_TMS_XI (MTK_PIN_NO(106) | 2) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DFD_TMS_XI (MTK_PIN_NO(106) | 3) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPUEJ_TMS_XI (MTK_PIN_NO(106) | 5) +#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7) + +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_UDI_TCK_XI (MTK_PIN_NO(107) | 2) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DFD_TCK_XI (MTK_PIN_NO(107) | 3) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPUEJ_TCK_XI (MTK_PIN_NO(107) | 5) +#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7) + +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_UDI_TDI_XI (MTK_PIN_NO(108) | 2) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DFD_TDI_XI (MTK_PIN_NO(108) | 3) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPUEJ_TDI_XI (MTK_PIN_NO(108) | 5) +#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7) + +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_UDI_TDO (MTK_PIN_NO(109) | 2) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DFD_TDO (MTK_PIN_NO(109) | 3) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPUEJ_TDO (MTK_PIN_NO(109) | 5) +#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7) + +#define MT8167_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8167_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1) +#define MT8167_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4) + +#define MT8167_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8167_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1) +#define MT8167_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4) + +#define MT8167_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8167_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1) +#define MT8167_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4) + +#define MT8167_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8167_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1) +#define MT8167_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4) + +#define MT8167_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8167_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1) +#define MT8167_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4) + +#define MT8167_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8167_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1) +#define MT8167_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4) + +#define MT8167_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8167_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1) +#define MT8167_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4) + +#define MT8167_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8167_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1) +#define MT8167_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4) + +#define MT8167_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8167_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1) +#define MT8167_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4) + +#define MT8167_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8167_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1) +#define MT8167_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4) + +#define MT8167_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8167_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1) +#define MT8167_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4) +#define MT8167_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5) + +#define MT8167_PIN_121_CEC__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT8167_PIN_121_CEC__FUNC_CEC (MTK_PIN_NO(121) | 1) + +#define MT8167_PIN_122_HTPLG__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT8167_PIN_122_HTPLG__FUNC_HTPLG (MTK_PIN_NO(122) | 1) + +#define MT8167_PIN_123_HDMISCK__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT8167_PIN_123_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(123) | 1) + +#define MT8167_PIN_124_HDMISD__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT8167_PIN_124_HDMISD__FUNC_HDMISD (MTK_PIN_NO(124) | 1) + +#endif /* __DTS_MT8167_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts new file mode 100644 index 000000000000..774a2f3fb4b2 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +/dts-v1/; + +#include "mt8167.dtsi" +#include "pumpkin-common.dtsi" + +/ { + model = "Pumpkin MT8167"; + compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi new file mode 100644 index 000000000000..1c5639ead622 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 MediaTek Inc. + * Copyright (c) 2020 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +#include <dt-bindings/clock/mt8167-clk.h> +#include <dt-bindings/memory/mt8167-larb-port.h> + +#include "mt8167-pinfunc.h" + +#include "mt8516.dtsi" + +/ { + compatible = "mediatek,mt8167"; + + soc { + topckgen: topckgen@10000000 { + compatible = "mediatek,mt8167-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: infracfg@10001000 { + compatible = "mediatek,mt8167-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + apmixedsys: apmixedsys@10018000 { + compatible = "mediatek,mt8167-apmixedsys", "syscon"; + reg = <0 0x10018000 0 0x710>; + #clock-cells = <1>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt8167-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt8167-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8167-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 44a0346133cd..21452c51a20a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -87,7 +87,6 @@ panel: panel { compatible = "lg,lp120up1"; power-supply = <&panel_fixed_3v3>; - ddc-i2c-bus = <&i2c0>; backlight = <&backlight>; port { diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 5e046f9d48ce..7fa870e4386a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -450,16 +450,82 @@ }; }; - scpsys: power-controller@10006000 { - compatible = "mediatek,mt8173-scpsys"; - #power-domain-cells = <1>; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - clocks = <&clk26m>, - <&topckgen CLK_TOP_MM_SEL>, - <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - clock-names = "mfg", "mm", "venc", "venc_lt"; - infracfg = <&infracfg>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8173-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8173_POWER_DOMAIN_VDEC { + reg = <MT8173_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC { + reg = <MT8173_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_ISP { + reg = <MT8173_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MM { + reg = <MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC_LT { + reg = <MT8173_POWER_DOMAIN_VENC_LT>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mm", "venclt"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_AUDIO { + reg = <MT8173_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_USB { + reg = <MT8173_POWER_DOMAIN_USB>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG_2D { + reg = <MT8173_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG { + reg = <MT8173_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; }; watchdog: watchdog@10007000 { @@ -792,7 +858,7 @@ compatible = "mediatek,mt8173-afe-pcm"; reg = <0 0x11220000 0 0x1000>; interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>; + power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>; clocks = <&infracfg CLK_INFRA_AUDIO>, <&topckgen CLK_TOP_AUDIO_SEL>, <&topckgen CLK_TOP_AUD_INTBUS_SEL>, @@ -868,7 +934,7 @@ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + power-domains = <&spm MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; clock-names = "sys_ck", "ref_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 1>; @@ -882,7 +948,7 @@ reg = <0 0x11270000 0 0x1000>; reg-names = "mac"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + power-domains = <&spm MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; clock-names = "sys_ck", "ref_ck"; status = "disabled"; @@ -925,7 +991,7 @@ mmsys: syscon@14000000 { compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; assigned-clock-rates = <400000000>; #clock-cells = <1>; @@ -940,7 +1006,7 @@ reg = <0 0x14001000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_RDMA0>, <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA0>; mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; @@ -951,7 +1017,7 @@ reg = <0 0x14002000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_RDMA1>, <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA1>; mediatek,larb = <&larb4>; }; @@ -960,28 +1026,28 @@ compatible = "mediatek,mt8173-mdp-rsz"; reg = <0 0x14003000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_RSZ0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; }; mdp_rsz1: rsz@14004000 { compatible = "mediatek,mt8173-mdp-rsz"; reg = <0 0x14004000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_RSZ1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; }; mdp_rsz2: rsz@14005000 { compatible = "mediatek,mt8173-mdp-rsz"; reg = <0 0x14005000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_RSZ2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; }; mdp_wdma0: wdma@14006000 { compatible = "mediatek,mt8173-mdp-wdma"; reg = <0 0x14006000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_WDMA>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WDMA>; mediatek,larb = <&larb0>; }; @@ -990,7 +1056,7 @@ compatible = "mediatek,mt8173-mdp-wrot"; reg = <0 0x14007000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_WROT0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT0>; mediatek,larb = <&larb0>; }; @@ -999,7 +1065,7 @@ compatible = "mediatek,mt8173-mdp-wrot"; reg = <0 0x14008000 0 0x1000>; clocks = <&mmsys CLK_MM_MDP_WROT1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT1>; mediatek,larb = <&larb4>; }; @@ -1008,7 +1074,7 @@ compatible = "mediatek,mt8173-disp-ovl"; reg = <0 0x1400c000 0 0x1000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL0>; iommus = <&iommu M4U_PORT_DISP_OVL0>; mediatek,larb = <&larb0>; @@ -1019,7 +1085,7 @@ compatible = "mediatek,mt8173-disp-ovl"; reg = <0 0x1400d000 0 0x1000>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL1>; iommus = <&iommu M4U_PORT_DISP_OVL1>; mediatek,larb = <&larb4>; @@ -1030,7 +1096,7 @@ compatible = "mediatek,mt8173-disp-rdma"; reg = <0 0x1400e000 0 0x1000>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; mediatek,larb = <&larb0>; @@ -1041,7 +1107,7 @@ compatible = "mediatek,mt8173-disp-rdma"; reg = <0 0x1400f000 0 0x1000>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; mediatek,larb = <&larb4>; @@ -1052,7 +1118,7 @@ compatible = "mediatek,mt8173-disp-rdma"; reg = <0 0x14010000 0 0x1000>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA2>; iommus = <&iommu M4U_PORT_DISP_RDMA2>; mediatek,larb = <&larb4>; @@ -1063,7 +1129,7 @@ compatible = "mediatek,mt8173-disp-wdma"; reg = <0 0x14011000 0 0x1000>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA0>; iommus = <&iommu M4U_PORT_DISP_WDMA0>; mediatek,larb = <&larb0>; @@ -1074,7 +1140,7 @@ compatible = "mediatek,mt8173-disp-wdma"; reg = <0 0x14012000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA1>; iommus = <&iommu M4U_PORT_DISP_WDMA1>; mediatek,larb = <&larb4>; @@ -1085,7 +1151,7 @@ compatible = "mediatek,mt8173-disp-color"; reg = <0 0x14013000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_COLOR0>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>; }; @@ -1094,7 +1160,7 @@ compatible = "mediatek,mt8173-disp-color"; reg = <0 0x14014000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_COLOR1>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>; }; @@ -1103,7 +1169,7 @@ compatible = "mediatek,mt8173-disp-aal"; reg = <0 0x14015000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_AAL>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; }; @@ -1112,7 +1178,7 @@ compatible = "mediatek,mt8173-disp-gamma"; reg = <0 0x14016000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_GAMMA>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; }; @@ -1120,21 +1186,21 @@ merge@14017000 { compatible = "mediatek,mt8173-disp-merge"; reg = <0 0x14017000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_MERGE>; }; split0: split@14018000 { compatible = "mediatek,mt8173-disp-split"; reg = <0 0x14018000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_SPLIT0>; }; split1: split@14019000 { compatible = "mediatek,mt8173-disp-split"; reg = <0 0x14019000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_SPLIT1>; }; @@ -1142,7 +1208,7 @@ compatible = "mediatek,mt8173-disp-ufoe"; reg = <0 0x1401a000 0 0x1000>; interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_UFOE>; }; @@ -1150,7 +1216,7 @@ compatible = "mediatek,mt8173-dsi"; reg = <0 0x1401b000 0 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DSI0_ENGINE>, <&mmsys CLK_MM_DSI0_DIGITAL>, <&mipi_tx0>; @@ -1164,7 +1230,7 @@ compatible = "mediatek,mt8173-dsi"; reg = <0 0x1401c000 0 0x1000>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DSI1_ENGINE>, <&mmsys CLK_MM_DSI1_DIGITAL>, <&mipi_tx1>; @@ -1178,7 +1244,7 @@ compatible = "mediatek,mt8173-dpi"; reg = <0 0x1401d000 0 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DPI_PIXEL>, <&mmsys CLK_MM_DPI_ENGINE>, <&apmixedsys CLK_APMIXED_TVDPLL>; @@ -1218,7 +1284,7 @@ compatible = "mediatek,mt8173-disp-mutex"; reg = <0 0x14020000 0 0x1000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_MUTEX_32K>; mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, <CMDQ_EVENT_MUTEX1_STREAM_EOF>; @@ -1228,7 +1294,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x14021000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_SMI_LARB0>, <&mmsys CLK_MM_SMI_LARB0>; clock-names = "apb", "smi"; @@ -1237,7 +1303,7 @@ smi_common: smi@14022000 { compatible = "mediatek,mt8173-smi-common"; reg = <0 0x14022000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>; clock-names = "apb", "smi"; @@ -1285,7 +1351,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x14027000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_SMI_LARB4>, <&mmsys CLK_MM_SMI_LARB4>; clock-names = "apb", "smi"; @@ -1301,7 +1367,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x15001000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_ISP>; + power-domains = <&spm MT8173_POWER_DOMAIN_ISP>; clocks = <&imgsys CLK_IMG_LARB2_SMI>, <&imgsys CLK_IMG_LARB2_SMI>; clock-names = "apb", "smi"; @@ -1338,7 +1404,7 @@ <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; mediatek,vpu = <&vpu>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>; clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, <&topckgen CLK_TOP_UNIVPLL_D2>, <&topckgen CLK_TOP_CCI400_SEL>, @@ -1370,7 +1436,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x16010000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>; clocks = <&vdecsys CLK_VDEC_CKEN>, <&vdecsys CLK_VDEC_LARB_CKEN>; clock-names = "apb", "smi"; @@ -1386,7 +1452,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x18001000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; clocks = <&vencsys CLK_VENC_CKE1>, <&vencsys CLK_VENC_CKE0>; clock-names = "apb", "smi"; @@ -1443,7 +1509,7 @@ <&vencsys CLK_VENC_CKE3>; clock-names = "jpgdec-smi", "jpgdec"; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_JPGDEC_WDMA>, <&iommu M4U_PORT_JPGDEC_BSDMA>; @@ -1459,7 +1525,7 @@ compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x19001000 0 0x1000>; mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>; clocks = <&vencltsys CLK_VENCLT_CKE1>, <&vencltsys CLK_VENCLT_CKE0>; clock-names = "apb", "smi"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 85f7c33ba446..bf2ad1294dd3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -19,6 +19,17 @@ stdout-path = "serial0:115200n8"; }; + backlight_lcd0: backlight_lcd0 { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 500000>; + power-supply = <&bl_pp5000>; + enable-gpios = <&pio 176 0>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + status = "okay"; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x80000000>; @@ -536,6 +547,17 @@ }; }; + pwm0_pin_default: pwm0_pin_default { + pins1 { + pinmux = <PINMUX_GPIO176__FUNC_GPIO176>; + output-high; + bias-pull-up; + }; + pins2 { + pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>; + }; + }; + scp_pins: scp { pins_scp_uart { pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>, @@ -670,6 +692,12 @@ }; }; +&pwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin_default>; +}; + &scp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 9cfd961c45eb..5b782a4769e7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -6,8 +6,11 @@ */ #include <dt-bindings/clock/mt8183-clk.h> +#include <dt-bindings/gce/mt8173-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/memory/mt8183-larb-port.h> +#include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/reset-controller/mt8183-resets.h> #include <dt-bindings/phy/phy.h> #include "mt8183-pinfunc.h" @@ -31,6 +34,11 @@ i2c9 = &i2c9; i2c10 = &i2c10; i2c11 = &i2c11; + ovl0 = &ovl0; + ovl-2l0 = &ovl_2l0; + ovl-2l1 = &ovl_2l1; + rdma0 = &rdma0; + rdma1 = &rdma1; }; cpus { @@ -316,6 +324,167 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8183-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + power-domain@MT8183_POWER_DOMAIN_AUDIO { + reg = <MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>; + clock-names = "audio", "audio1", "audio2"; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_CONN { + reg = <MT8183_POWER_DOMAIN_CONN>; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&topckgen CLK_TOP_MUX_MFG>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8183_POWER_DOMAIN_MFG { + reg = <MT8183_POWER_DOMAIN_MFG>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8183_POWER_DOMAIN_MFG_CORE0 { + reg = <MT8183_POWER_DOMAIN_MFG_CORE0>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_MFG_CORE1 { + reg = <MT8183_POWER_DOMAIN_MFG_CORE1>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_MFG_2D { + reg = <MT8183_POWER_DOMAIN_MFG_2D>; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8183_POWER_DOMAIN_DISP { + reg = <MT8183_POWER_DOMAIN_DISP>; + clocks = <&topckgen CLK_TOP_MUX_MM>, + <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB1>, + <&mmsys CLK_MM_GALS_COMM0>, + <&mmsys CLK_MM_GALS_COMM1>, + <&mmsys CLK_MM_GALS_CCU2MM>, + <&mmsys CLK_MM_GALS_IPU12MM>, + <&mmsys CLK_MM_GALS_IMG2MM>, + <&mmsys CLK_MM_GALS_CAM2MM>, + <&mmsys CLK_MM_GALS_IPU2MM>; + clock-names = "mm", "mm-0", "mm-1", "mm-2", "mm-3", + "mm-4", "mm-5", "mm-6", "mm-7", + "mm-8", "mm-9"; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8183_POWER_DOMAIN_CAM { + reg = <MT8183_POWER_DOMAIN_CAM>; + clocks = <&topckgen CLK_TOP_MUX_CAM>, + <&camsys CLK_CAM_LARB6>, + <&camsys CLK_CAM_LARB3>, + <&camsys CLK_CAM_SENINF>, + <&camsys CLK_CAM_CAMSV0>, + <&camsys CLK_CAM_CAMSV1>, + <&camsys CLK_CAM_CAMSV2>, + <&camsys CLK_CAM_CCU>; + clock-names = "cam", "cam-0", "cam-1", + "cam-2", "cam-3", "cam-4", + "cam-5", "cam-6"; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_ISP { + reg = <MT8183_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MUX_IMG>, + <&imgsys CLK_IMG_LARB5>, + <&imgsys CLK_IMG_LARB2>; + clock-names = "isp", "isp-0", "isp-1"; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_VDEC { + reg = <MT8183_POWER_DOMAIN_VDEC>; + mediatek,smi = <&smi_common>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_VENC { + reg = <MT8183_POWER_DOMAIN_VENC>; + mediatek,smi = <&smi_common>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_VPU_TOP { + reg = <MT8183_POWER_DOMAIN_VPU_TOP>; + clocks = <&topckgen CLK_TOP_MUX_IPU_IF>, + <&topckgen CLK_TOP_MUX_DSP>, + <&ipu_conn CLK_IPU_CONN_IPU>, + <&ipu_conn CLK_IPU_CONN_AHB>, + <&ipu_conn CLK_IPU_CONN_AXI>, + <&ipu_conn CLK_IPU_CONN_ISP>, + <&ipu_conn CLK_IPU_CONN_CAM_ADL>, + <&ipu_conn CLK_IPU_CONN_IMG_ADL>; + clock-names = "vpu", "vpu1", "vpu-0", "vpu-1", + "vpu-2", "vpu-3", "vpu-4", "vpu-5"; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8183_POWER_DOMAIN_VPU_CORE0 { + reg = <MT8183_POWER_DOMAIN_VPU_CORE0>; + clocks = <&topckgen CLK_TOP_MUX_DSP1>; + clock-names = "vpu2"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + + power-domain@MT8183_POWER_DOMAIN_VPU_CORE1 { + reg = <MT8183_POWER_DOMAIN_VPU_CORE1>; + clocks = <&topckgen CLK_TOP_MUX_DSP2>; + clock-names = "vpu3"; + mediatek,infracfg = <&infracfg>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt8183-wdt"; reg = <0 0x10007000 0 0x100>; @@ -359,11 +528,20 @@ clock-names = "clk13m"; }; + iommu: iommu@10205000 { + compatible = "mediatek,mt8183-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>; + mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 + &larb4 &larb5 &larb6>; + #iommu-cells = <1>; + }; + gce: mailbox@10238000 { compatible = "mediatek,mt8183-gce"; reg = <0 0x10238000 0 0x4000>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>; - #mbox-cells = <3>; + #mbox-cells = <2>; clocks = <&infracfg CLK_INFRA_GCE>; clock-names = "gce"; }; @@ -479,6 +657,16 @@ status = "disabled"; }; + pwm0: pwm@1100e000 { + compatible = "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>, + <&infracfg CLK_INFRA_DISP_PWM>; + clock-names = "main", "mm"; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>, @@ -720,10 +908,27 @@ status = "disabled"; }; + mipi_tx0: mipi-dphy@11e50000 { + compatible = "mediatek,mt8183-mipi-tx"; + reg = <0 0x11e50000 0 0x1000>; + clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>; + clock-names = "ref_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "mipi_tx0_pll"; + nvmem-cells = <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; + }; + efuse: efuse@11f10000 { compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x11f10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + mipi_tx_calibration: calib@190 { + reg = <0x190 0xc>; + }; }; u3phy: usb-phy@11f40000 { @@ -765,24 +970,205 @@ #clock-cells = <1>; }; + ovl0: ovl@14008000 { + compatible = "mediatek,mt8183-disp-ovl"; + reg = <0 0x14008000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,larb = <&larb0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>; + }; + + ovl_2l0: ovl@14009000 { + compatible = "mediatek,mt8183-disp-ovl-2l"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>; + mediatek,larb = <&larb0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; + }; + + ovl_2l1: ovl@1400a000 { + compatible = "mediatek,mt8183-disp-ovl-2l"; + reg = <0 0x1400a000 0 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL1_2L>; + iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>; + mediatek,larb = <&larb0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>; + }; + + rdma0: rdma@1400b000 { + compatible = "mediatek,mt8183-disp-rdma"; + reg = <0 0x1400b000 0 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,larb = <&larb0>; + mediatek,rdma_fifo_size = <5120>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; + }; + + rdma1: rdma@1400c000 { + compatible = "mediatek,mt8183-disp-rdma"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu M4U_PORT_DISP_RDMA1>; + mediatek,larb = <&larb0>; + mediatek,rdma_fifo_size = <2048>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + + color0: color@1400e000 { + compatible = "mediatek,mt8183-disp-color", + "mediatek,mt8173-disp-color"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + + ccorr0: ccorr@1400f000 { + compatible = "mediatek,mt8183-disp-ccorr"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + }; + + aal0: aal@14010000 { + compatible = "mediatek,mt8183-disp-aal", + "mediatek,mt8173-disp-aal"; + reg = <0 0x14010000 0 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_AAL0>; + }; + + gamma0: gamma@14011000 { + compatible = "mediatek,mt8183-disp-gamma", + "mediatek,mt8173-disp-gamma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + }; + + dither0: dither@14012000 { + compatible = "mediatek,mt8183-disp-dither"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + }; + + dsi0: dsi@14014000 { + compatible = "mediatek,mt8183-dsi"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + mediatek,syscon-dsi = <&mmsys 0x140>; + clocks = <&mmsys CLK_MM_DSI0_MM>, + <&mmsys CLK_MM_DSI0_IF>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + }; + + mutex: mutex@14016000 { + compatible = "mediatek,mt8183-disp-mutex"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + }; + + larb0: larb@14017000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x14017000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clock-names = "apb", "smi"; + }; + + smi_common: smi@14019000 { + compatible = "mediatek,mt8183-smi-common", "syscon"; + reg = <0 0x14019000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_GALS_COMM0>, + <&mmsys CLK_MM_GALS_COMM1>; + clock-names = "apb", "smi", "gals0", "gals1"; + }; + imgsys: syscon@15020000 { compatible = "mediatek,mt8183-imgsys", "syscon"; reg = <0 0x15020000 0 0x1000>; #clock-cells = <1>; }; + larb5: larb@15021000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x15021000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_LARB5>, <&imgsys CLK_IMG_LARB5>, + <&mmsys CLK_MM_GALS_IMG2MM>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8183_POWER_DOMAIN_ISP>; + }; + + larb2: larb@1502f000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x1502f000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_LARB2>, <&imgsys CLK_IMG_LARB2>, + <&mmsys CLK_MM_GALS_IPU2MM>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8183_POWER_DOMAIN_ISP>; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt8183-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; #clock-cells = <1>; }; + larb1: larb@16010000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_VDEC>, <&vdecsys CLK_VDEC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>; + }; + vencsys: syscon@17000000 { compatible = "mediatek,mt8183-vencsys", "syscon"; reg = <0 0x17000000 0 0x1000>; #clock-cells = <1>; }; + larb4: larb@17010000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x17010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vencsys CLK_VENC_LARB>, + <&vencsys CLK_VENC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; + }; + ipu_conn: syscon@19000000 { compatible = "mediatek,mt8183-ipu_conn", "syscon"; reg = <0 0x19000000 0 0x1000>; @@ -812,5 +1198,25 @@ reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + + larb6: larb@1a001000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x1a001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_LARB6>, <&camsys CLK_CAM_LARB6>, + <&mmsys CLK_MM_GALS_CAM2MM>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8183_POWER_DOMAIN_CAM>; + }; + + larb3: larb@1a002000 { + compatible = "mediatek,mt8183-smi-larb"; + reg = <0 0x1a002000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_LARB3>, <&camsys CLK_CAM_LARB3>, + <&mmsys CLK_MM_GALS_IPU12MM>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8183_POWER_DOMAIN_CAM>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts new file mode 100644 index 000000000000..0205837fa698 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ +/dts-v1/; +#include "mt8192.dtsi" + +/ { + model = "MediaTek MT8192 evaluation board"; + compatible = "mediatek,mt8192-evb", "mediatek,mt8192"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi new file mode 100644 index 000000000000..e12e024de122 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -0,0 +1,512 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mt8192-pinfunc.h> + +/ { + compatible = "mediatek,mt8192"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + clk26m: oscillator0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <1701000000>; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <530>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <1701000000>; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <530>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <1701000000>; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <530>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <1701000000>; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <530>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2171000000>; + next-level-cache = <&l2_1>; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2171000000>; + next-level-cache = <&l2_1>; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2171000000>; + next-level-cache = <&l2_1>; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2171000000>; + next-level-cache = <&l2_1>; + capacity-dmips-mhz = <1024>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l3_0: l3-cache { + compatible = "cache"; + }; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clock-frequency = <13000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8192-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c20000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", + "iocfg_bl", "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8192-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>; + clock-names = "clk13m"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8192-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8192-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi6: spi@1101d000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1101d000 0 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi7: spi@1101e000 { + compatible = "mediatek,mt8192-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1101e000 0 0x1000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c3: i2c3@11cb0000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11cb0000 0 0x1000>, + <0 0x10217300 0 0x80>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c7@11d00000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x10217600 0 0x180>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c8@11d01000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d01000 0 0x1000>, + <0 0x10217780 0 0x180>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c9@11d02000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d02000 0 0x1000>, + <0 0x10217900 0 0x180>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c1@11d20000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d20000 0 0x1000>, + <0 0x10217100 0 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c2@11d21000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d21000 0 0x1000>, + <0 0x10217180 0 0x180>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c4@11d22000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11d22000 0 0x1000>, + <0 0x10217380 0 0x180>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c5@11e00000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10217500 0 0x80>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c0@11f00000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11f00000 0 0x1000>, + <0 0x10217080 0 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c6@11f01000 { + compatible = "mediatek,mt8192-i2c"; + reg = <0 0x11f01000 0 0x1000>, + <0 0x10217580 0 0x80>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index 89af661e7f63..e6e4d9d60094 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -237,6 +237,13 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; }; + efuse: efuse@10009000 { + compatible = "mediatek,mt8516-efuse", "mediatek,efuse"; + reg = <0 0x10009000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + pwrap: pwrap@1000f000 { compatible = "mediatek,mt8516-pwrap"; reg = <0 0x1000f000 0 0x1000>; @@ -455,7 +462,21 @@ status = "disabled"; }; - usb0_phy: usb@11110000 { + usb1: usb@11190000 { + compatible = "mediatek,mtk-musb"; + reg = <0 0x11190000 0 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&usb1_port PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_USB>, + <&topckgen CLK_TOP_USBIF>, + <&topckgen CLK_TOP_USB_1P>; + clock-names = "main","mcu","univpll"; + dr_mode = "host"; + status = "disabled"; + }; + + usb_phy: usb@11110000 { compatible = "mediatek,generic-tphy-v1"; reg = <0 0x11110000 0 0x800>; #address-cells = <2>; @@ -469,6 +490,23 @@ clock-names = "ref"; #phy-cells = <1>; }; + + usb1_port: usb-phy@11110900 { + reg = <0 0x11110900 0 0x100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + auxadc: adc@11003000 { + compatible = "mediatek,mt8516-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11003000 0 0x1000>; + clocks = <&topckgen CLK_TOP_AUX_ADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index 29d8cf6df46b..63fd70086bb8 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -63,91 +63,91 @@ gpio-controller; #gpio-cells = <2>; - eint20_mux_sel0 { + eint20-mux-sel0-hog { gpio-hog; gpios = <0 0>; input; line-name = "eint20_mux_sel0"; }; - expcon_mux_sel1 { + expcon-mux-sel1-hog { gpio-hog; gpios = <1 0>; input; line-name = "expcon_mux_sel1"; }; - mrg_di_mux_sel2 { + mrg-di-mux-sel2-hog { gpio-hog; gpios = <2 0>; input; line-name = "mrg_di_mux_sel2"; }; - sd_sdio_mux_sel3 { + sd-sdio-mux-sel3-hog { gpio-hog; gpios = <3 0>; input; line-name = "sd_sdio_mux_sel3"; }; - sd_sdio_mux_ctrl7 { + sd-sdio-mux-ctrl7-hog { gpio-hog; gpios = <7 0>; output-low; line-name = "sd_sdio_mux_ctrl7"; }; - hw_id0 { + hw-id0-hog { gpio-hog; gpios = <8 0>; input; line-name = "hw_id0"; }; - hw_id1 { + hw-id1-hog { gpio-hog; gpios = <9 0>; input; line-name = "hw_id1"; }; - hw_id2 { + hw-id2-hog { gpio-hog; gpios = <10 0>; input; line-name = "hw_id2"; }; - fg_int_n { + fg-int-n-hog { gpio-hog; gpios = <11 0>; input; line-name = "fg_int_n"; }; - usba_pwr_en { + usba-pwr-en-hog { gpio-hog; gpios = <12 0>; output-high; line-name = "usba_pwr_en"; }; - wifi_3v3_pg { + wifi-3v3-pg-hog { gpio-hog; gpios = <13 0>; input; line-name = "wifi_3v3_pg"; }; - cam_rst { + cam-rst-hog { gpio-hog; gpios = <14 0>; output-low; line-name = "cam_rst"; }; - cam_pwdn { + cam-pwdn-hog { gpio-hog; gpios = <15 0>; output-low; @@ -195,7 +195,7 @@ }; }; -&usb0_phy { +&usb_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 3cb01c39c3c8..d64621d1213b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -135,6 +135,11 @@ }; }; + reset@611010008 { + compatible = "microchip,sparx5-chip-reset"; + reg = <0x6 0x11010008 0x4>; + }; + uart0: serial@600100000 { pinctrl-0 = <&uart_pins>; pinctrl-names = "default"; @@ -226,6 +231,22 @@ function = "si2"; }; + sgpio0_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; + function = "sg1"; + }; + + sgpio2_pins: sgpio2-pins { + pins = "GPIO_30", "GPIO_31", "GPIO_32", + "GPIO_33"; + function = "sg2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -256,6 +277,81 @@ }; }; + sgpio0: gpio@61101036c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio0_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101036c 0x100>; + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out0: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio1: gpio@611010484 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio1_pins>; + pinctrl-names = "default"; + reg = <0x6 0x11010484 0x100>; + sgpio_in1: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio2: gpio@61101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101059c 0x100>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + i2c0: i2c@600101000 { compatible = "snps,designware-i2c"; status = "disabled"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 6b2da7c7520c..9baa085d7861 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -69,6 +69,11 @@ }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <0 23>; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index f37b478d6534..f0c915160990 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -36,6 +36,264 @@ gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; }; &spi0 { diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index b02b8c8ce44d..e28c6dd16377 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -20,6 +20,50 @@ gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@3 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@4 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@5 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@6 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@7 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { @@ -83,6 +127,17 @@ }; }; +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl"; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index e40281510c0c..9928a87f593a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -629,9 +629,9 @@ <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; - reset-names = "sata", "sata-oob", "sata-cold"; + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; status = "disabled"; }; @@ -865,7 +865,9 @@ reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */ <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ reg-names = "soctherm-reg", "ccroc-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, <&tegra_car TEGRA124_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; @@ -925,6 +927,11 @@ hysteresis = <1000>; type = "critical"; }; + mem_throttle_trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { @@ -975,6 +982,11 @@ hysteresis = <1000>; type = "critical"; }; + pllx_throttle_trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index c28d51cc5797..6fd2e0542c27 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -285,6 +285,10 @@ }; }; + sata@3507000 { + status = "okay"; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 0c46ab7bbbf3..58c51965df47 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -685,6 +685,7 @@ reg = <0x0 0x03520000 0x0 0x1000>, <0x0 0x03540000 0x0 0x1000>; reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; reset-names = "padctl"; @@ -845,7 +846,9 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x03881000 0x0 0x1000>, - <0x0 0x03882000 0x0 0x2000>; + <0x0 0x03882000 0x0 0x2000>, + <0x0 0x03884000 0x0 0x2000>, + <0x0 0x03886000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; @@ -1501,6 +1504,34 @@ }; }; + sata@3507000 { + compatible = "nvidia,tegra186-ahci"; + reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */ + <0x0 0x03500000 0x0 0x00007000>, /* SATA */ + <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */ + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_SATA>; + + clocks = <&bpmp TEGRA186_CLK_SATA>, + <&bpmp TEGRA186_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + assigned-clocks = <&bpmp TEGRA186_CLK_SATA>, + <&bpmp TEGRA186_CLK_SATA_OOB>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>, + <&bpmp TEGRA186_CLK_PLLP>; + assigned-clock-rates = <102000000>, + <204000000>; + resets = <&bpmp TEGRA186_RESET_SATA>, + <&bpmp TEGRA186_RESET_SATACOLD>; + reset-names = "sata", "sata-cold"; + status = "disabled"; + }; + bpmp: bpmp { compatible = "nvidia,tegra186-bpmp"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, @@ -1534,7 +1565,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + denver_0: cpu@0 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; i-cache-size = <0x20000>; @@ -1547,7 +1578,7 @@ reg = <0x000>; }; - cpu@1 { + denver_1: cpu@1 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; i-cache-size = <0x20000>; @@ -1560,7 +1591,7 @@ reg = <0x001>; }; - cpu@2 { + ca57_0: cpu@2 { compatible = "arm,cortex-a57"; device_type = "cpu"; i-cache-size = <0xC000>; @@ -1573,7 +1604,7 @@ reg = <0x100>; }; - cpu@3 { + ca57_1: cpu@3 { compatible = "arm,cortex-a57"; device_type = "cpu"; i-cache-size = <0xC000>; @@ -1586,7 +1617,7 @@ reg = <0x101>; }; - cpu@4 { + ca57_2: cpu@4 { compatible = "arm,cortex-a57"; device_type = "cpu"; i-cache-size = <0xC000>; @@ -1599,7 +1630,7 @@ reg = <0x102>; }; - cpu@5 { + ca57_3: cpu@5 { compatible = "arm,cortex-a57"; device_type = "cpu"; i-cache-size = <0xC000>; @@ -1631,6 +1662,22 @@ }; }; + pmu_denver { + compatible = "nvidia,denver-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&denver_0 &denver_1>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>; + }; + thermal-zones { a57 { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 93438d2b9469..25f36d6118f8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -378,7 +378,7 @@ nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,lpdr = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; @@ -390,7 +390,7 @@ nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,lpdr = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; @@ -782,13 +782,13 @@ reg = <0x3510000 0x10000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_HDA>, - <&bpmp TEGRA194_CLK_HDA2CODEC_2X>, - <&bpmp TEGRA194_CLK_HDA2HDMICODEC>; - clock-names = "hda", "hda2codec_2x", "hda2hdmi"; + <&bpmp TEGRA194_CLK_HDA2HDMICODEC>, + <&bpmp TEGRA194_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&bpmp TEGRA194_RESET_HDA>, - <&bpmp TEGRA194_RESET_HDA2CODEC_2X>, - <&bpmp TEGRA194_RESET_HDA2HDMICODEC>; - reset-names = "hda", "hda2codec_2x", "hda2hdmi"; + <&bpmp TEGRA194_RESET_HDA2HDMICODEC>, + <&bpmp TEGRA194_RESET_HDA2CODEC_2X>; + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>, <&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>; @@ -801,6 +801,7 @@ reg = <0x03520000 0x1000>, <0x03540000 0x1000>; reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>; reset-names = "padctl"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 4c9c2a054642..69102dcea8b0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -119,7 +119,7 @@ aconnect@702c0000 { status = "okay"; - dma@702e2000 { + dma-controller@702e2000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 859241db4b4d..6a877decffc1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -629,7 +629,7 @@ aconnect@702c0000 { status = "okay"; - dma@702e2000 { + dma-controller@702e2000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index bd78378248a6..131c064d6991 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1717,7 +1717,7 @@ aconnect@702c0000 { status = "okay"; - dma@702e2000 { + dma-controller@702e2000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index d47c88950d38..4fbf8c15b0a1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -979,9 +979,9 @@ <&tegra_car TEGRA210_CLK_SATA_OOB>; clock-names = "sata", "sata-oob"; resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; - reset-names = "sata", "sata-oob", "sata-cold"; + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; status = "disabled"; }; @@ -1040,6 +1040,7 @@ padctl: padctl@7009f000 { compatible = "nvidia,tegra210-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; resets = <&tegra_car 142>; reset-names = "padctl"; @@ -1344,7 +1345,7 @@ ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; status = "disabled"; - adma: dma@702e2000 { + adma: dma-controller@702e2000 { compatible = "nvidia,tegra210-adma"; reg = <0x702e2000 0x2000>; interrupt-parent = <&agic>; @@ -1724,6 +1725,7 @@ throttle_heavy: heavy { nvidia,priority = <100>; nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; #cooling-cells = <2>; }; @@ -1780,6 +1782,12 @@ type = "active"; }; + mem-hot-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; + mem-shutdown-trip { temperature = <103000>; hysteresis = <0>; @@ -1842,6 +1850,12 @@ hysteresis = <0>; type = "critical"; }; + + pllx-throttle-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index fb4631f898fd..5113fac80b7a 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb @@ -26,6 +27,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb @@ -41,5 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3c7f97539390..3a9538e1ec97 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -417,11 +417,6 @@ vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - s3 { regulator-min-microvolt = <375000>; regulator-max-microvolt = <1562000>; @@ -445,11 +440,6 @@ regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - l4 { regulator-min-microvolt = <1750000>; regulator-max-microvolt = <3337000>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index e8eaa958c199..99cefe88f6f2 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -62,3 +62,19 @@ bias-pull-down; }; }; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 59e0cbfa2214..9fa5b028e4f3 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -156,8 +156,8 @@ no-map; }; - tz: tz@48500000 { - reg = <0x0 0x48500000 0x0 0x00200000>; + tz: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x00400000>; no-map; }; @@ -167,7 +167,7 @@ }; q6_region: memory@4ab00000 { - reg = <0x0 0x4ab00000 0x0 0x02800000>; + reg = <0x0 0x4ab00000 0x0 0x05500000>; no-map; }; }; @@ -192,7 +192,7 @@ clock-names = "core"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x00704000 0x0 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -231,6 +231,17 @@ drive-strength = <8>; bias-pull-down; }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio17"; + function = "qpic_pad"; + drive-strength = <8>; + bias-disable; + }; }; gcc: gcc@1800000 { @@ -252,7 +263,7 @@ reg = <0x0 0x01945000 0x0 0xe000>; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -332,6 +343,36 @@ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1a000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "iface_clk", "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq6018-nand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 829e37ac82f6..a32e5e79ab0b 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -276,7 +276,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -372,7 +372,7 @@ status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07984000 0x1a000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index b9d3c5d98dd0..1e893c0b6fbc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,8 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> / { model = "Longcheer L8150"; @@ -50,6 +52,139 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + reg_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "ctp"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ctp_pwr_en_default>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_ctp>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; // Touchscreen + }; + }; }; &blsp1_uart2 { @@ -61,6 +196,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_vib { + status = "okay"; +}; + &pronto { status = "okay"; }; @@ -98,11 +237,6 @@ vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1300000>; - }; - s3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; @@ -123,11 +257,6 @@ regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1287500>; - }; - l4 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; @@ -207,6 +336,22 @@ }; &msmgpio { + camera_flash_default: camera-flash-default { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ctp_pwr_en_default: ctp-pwr-en-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107"; function = "gpio"; @@ -215,6 +360,22 @@ bias-pull-up; }; + gyro_int_default: gyro-int-default { + pins = "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tp_int_default: tp-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + usb_vbus_default: usb-vbus-default { pins = "gpio62"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index cd626e7db599..539823b2c36e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -17,13 +17,10 @@ }; &mpss { - cx-supply = <&pm8916_s1>; - mx-supply = <&pm8916_l3>; pll-supply = <&pm8916_l7>; }; &pronto { - vddmx-supply = <&pm8916_l3>; vddpx-supply = <&pm8916_l7>; iris { @@ -53,13 +50,13 @@ smd_rpm_regulators: pm8916-regulators { compatible = "qcom,rpm-pm8916-regulators"; - pm8916_s1: s1 {}; + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ pm8916_s3: s3 {}; pm8916_s4: s4 {}; pm8916_l1: l1 {}; pm8916_l2: l2 {}; - pm8916_l3: l3 {}; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ pm8916_l4: l4 {}; pm8916_l5: l5 {}; pm8916_l6: l6 {}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index b18d21e42f59..f91269492d72 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -78,6 +78,9 @@ sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + #address-cells = <1>; #size-cells = <0>; @@ -164,11 +167,6 @@ vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1300000>; - }; - s3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; @@ -189,11 +187,6 @@ regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1287500>; - }; - l4 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; @@ -314,6 +307,14 @@ }; }; + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + muic_int_default: muic-int-default { pins = "gpio12"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 086f07ead5cb..661f41ad978b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -28,6 +28,27 @@ "0", "0", "1"; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + &dsi0 { panel@0 { reg = <0>; @@ -59,4 +80,12 @@ drive-strength = <2>; bias-disable; }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index aaa21899f1a6..402e891a84ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8916.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> #include <dt-bindings/thermal/thermal.h> @@ -289,6 +290,35 @@ compatible = "qcom,rpmcc-msm8916"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; }; }; }; @@ -1263,6 +1293,10 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, <&gcc GCC_BOOT_ROM_AHB_CLK>, @@ -1391,7 +1425,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -1660,6 +1694,10 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,state = <&wcnss_smp2p_out 0>; qcom,state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts index 3cc01f02219d..c337a86a5c77 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts @@ -32,6 +32,34 @@ }; }; +&blsp_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2560>; + }; + }; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 8626b3a50eda..0c422af47917 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -242,6 +242,37 @@ }; }; + usb3: usb@f92f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0xf92f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + dwc3@f9200000 { + compatible = "snps,dwc3"; + reg = <0xf9200000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + sdhc_1: sdhci@f9824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; @@ -269,6 +300,29 @@ status = "disabled"; }; + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&tlmm 100 0>; + bus-width = <4>; + status = "disabled"; + }; + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; @@ -282,6 +336,22 @@ status = "disabled"; }; + blsp_i2c1: i2c@f9923000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_i2c2: i2c@f9924000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; @@ -502,6 +572,20 @@ bias-pull-down; }; + i2c1_default: i2c1-default { + function = "blsp_i2c1"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + function = "gpio"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + i2c2_default: i2c2-default { function = "blsp_i2c2"; pins = "gpio6", "gpio7"; @@ -573,6 +657,42 @@ drive-strength = <2>; bias-disable; }; + + sdc2_clk_on: sdc2-clk-on { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc2_clk_off: sdc2-clk-off { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts new file mode 100644 index 000000000000..ed9034b96013 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" + +/ { + model = "Microsoft Lumia 950 XL"; + compatible = "microsoft,cityman", "qcom,msm8994"; + + /* + * Most Lumia 950XL users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* + * This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2660>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&sdhc1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6707f898607f..6e083a2f690b 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -282,6 +282,37 @@ }; }; + usb3: usb@f92f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0xf92f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + dwc3@f9200000 { + compatible = "snps,dwc3"; + reg = <0xf9200000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + sdhc1: sdhci@f9824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; @@ -305,7 +336,30 @@ status = "disabled"; }; - blsp1_dma: dma@f9904000 { + sdhc2: sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&tlmm 100 0>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@f9904000 { compatible = "qcom,bam-v1.7.0"; reg = <0xf9904000 0x19000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -401,7 +455,7 @@ status = "disabled"; }; - blsp2_dma: dma@f9944000 { + blsp2_dma: dma-controller@f9944000 { compatible = "qcom,bam-v1.7.0"; reg = <0xf9944000 0x19000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; @@ -683,6 +737,42 @@ pins = "sdc1_rclk"; bias-pull-down; }; + + sdc2_clk_on: sdc2-clk-on { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <10>; + }; + + sdc2_clk_off: sdc2-clk-off { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index fd6ae5464dea..7eef07e73e25 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1990,7 +1990,7 @@ }; }; - slimbam: dma@9184000 { + slimbam: dma-controller@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c45870600909..ebdaaf1dfca4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1754,7 +1754,7 @@ status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x25000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 57af0b4a384d..8ab4f1f78bbf 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -52,6 +52,16 @@ }; }; + pm6150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm6150_gpio: gpios@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index f84027b505d1..b49860cd1387 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -11,6 +11,30 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + }; + + pm6150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm6150l_gpio: gpios@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 1b6406927509..a53eccf2b695 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -97,7 +97,7 @@ }; }; - rtc@6000 { + pm8150_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; reg-names = "rtc", "alarm"; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 7e4f777746cb..5ffdf37d8e31 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,7 +1,32 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> -#include <dt-bindings/input/linux-event-codes.h> + +/ { + thermal-zones { + pm8994 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8994_temp>; + + trips { + pm8994_alert0: pm8994-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8994_crit: pm8994-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -35,33 +60,56 @@ }; + pm8994_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8994_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8994_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + pm8994_gpios: gpios@c000 { - compatible = "qcom,pm8994-gpio"; + compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8994_gpios 0 0 22>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8994_mpps: mpps@a000 { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index b654b802e95c..339790ba585d 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -801,7 +801,7 @@ status = "disabled"; }; - blsp1_dma: dma@7884000 { + blsp1_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x25000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -1045,7 +1045,7 @@ status = "disabled"; }; - blsp2_dma: dma@7ac4000 { + blsp2_dma: dma-controller@7ac4000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07ac4000 0x17000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 1528a865f1f8..ce22d4fa383e 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -18,12 +18,20 @@ aliases { serial0 = &uart12; + sdhc2 = &sdhc_2; }; chosen { stdout-path = "serial0:115200n8"; }; + /* Fixed crystal oscillator dedicated to MCP2518FD */ + clk40M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + dc12v: dc12v-regulator { compatible = "regulator-fixed"; regulator-name = "DC12V"; @@ -459,6 +467,10 @@ "PM3003A_MODE"; }; +&pm8150_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -471,9 +483,33 @@ status = "okay"; }; +&sdhc_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + bus-width = <4>; + /* there seem to be issues with HS400-1.8V mode, so disable it */ + no-1-8-v; + no-sdio; + no-emmc; +}; + /* CAN */ &spi0 { status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; }; &tlmm { @@ -659,6 +695,32 @@ "HST_BLE_SNS_UART_RX", "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio77"; + function = "gpio"; + bias-pull-up; + }; }; &uart12 { @@ -684,3 +746,49 @@ vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <18800>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi new file mode 100644 index 000000000000..d8ed1d7b4ec7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 lite device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +&cpu6_opp10 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp11 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp12 { + opp-peak-kBps = <8532000 23347200>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index ae4c23a4fe65..30e3e769d2b4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,6 +14,17 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts index c3f426c3c30a..919bfaea6189 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -8,8 +8,8 @@ #include "sc7180-trogdor-lazor-r1.dts" / { - model = "Google Lazor (rev1+) with KB Backlight"; - compatible = "google,lazor-sku2", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2) with KB Backlight"; + compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index 73e59cf7752a..e16ba7b01f25 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -9,8 +9,16 @@ #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Lazor (rev1+) with LTE"; - compatible = "google,lazor-sku0", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2) with LTE"; + compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 3151ae31c1cc..c2ef06367baf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -10,6 +10,17 @@ #include "sc7180-trogdor-lazor.dtsi" / { - model = "Google Lazor (rev1+)"; - compatible = "google,lazor", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2)"; + compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; +}; + +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts new file mode 100644 index 000000000000..6985beb97e53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r3.dts" + +/ { + model = "Google Lazor (rev3+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts new file mode 100644 index 000000000000..0881f8dd02c9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r3.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev3+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts new file mode 100644 index 000000000000..1b9d2f46359e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev3+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 180ef9e04306..89e5cd29ec09 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -30,7 +30,12 @@ ap_h1_spi: &spi0 {}; }; &ap_sar_sensor { - status = "okay"; + semtech,cs0-ground; + semtech,combined-sensors = <3>; + semtech,resolution = "fine"; + semtech,startup-sensor = <0>; + semtech,proxraw-strength = <8>; + semtech,avg-pos-strength = <64>; }; ap_ts_pen_1v8: &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 44956e3165a1..469aad4e5948 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -9,6 +9,10 @@ label = "proximity-wifi-lte"; }; +&mpss_mem { + reg = <0x0 0x86000000 0x0 0x8c00000>; +}; + &remoteproc_mpss { firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 0a281c24841c..2cb522d6962e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -34,11 +34,6 @@ ap_h1_spi: &spi0 {}; }; }; -&ap_sar_sensor_i2c { - /* Not hooked up */ - status = "disabled"; -}; - ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -58,6 +53,17 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index bf875589d364..8ed7dd39f6e3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -13,6 +13,23 @@ #include "pm6150.dtsi" #include "pm6150l.dtsi" +/ { + thermal-zones { + charger-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + + trips { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; + /* * Reserved memory changes * @@ -39,7 +56,7 @@ }; mpss_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x8c00000>; + reg = <0x0 0x86000000 0x0 0x2000000>; no-map; }; @@ -174,11 +191,38 @@ vin-supply = <&pp3300_a>; }; + pp3300_hub: pp3300-hub { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + /* BOARD-SPECIFIC TOP LEVEL NODES */ backlight: backlight { compatible = "pwm-backlight"; + /* The panels don't seem to like anything below ~ 5% */ + brightness-levels = < + 196 256 324 400 484 576 676 784 900 1024 1156 1296 + 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136 + 3364 3600 3844 4096 + >; + num-interpolated-steps = <64>; + default-brightness-level = <951>; + pwms = <&cros_ec_pwm 1>; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; power-supply = <&ppvar_sys>; @@ -192,7 +236,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_pdct_l>; - pen-insert { + pen_insert: pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ @@ -469,13 +513,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp3300_hub: pp3300_l7c: ldo7 { regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - regulator-boot-on; }; pp1800_brij_vccio: @@ -645,7 +686,6 @@ edp_brij_i2c: &i2c2 { }; ap_sar_sensor_i2c: &i2c5 { - status = "okay"; clock-frequency = <400000>; ap_sar_sensor: proximity@28 { @@ -733,6 +773,25 @@ hp_i2c: &i2c9 { status = "okay"; }; +&pm6150_adc { + charger-thermistor@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm6150_pwrkey { status = "disabled"; }; @@ -776,7 +835,20 @@ hp_i2c: &i2c9 { cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; }; +&spi0 { + pinctrl-0 = <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; +}; + +&spi6 { + pinctrl-0 = <&qup_spi6_cs_gpio>; + cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; +}; + ap_spi_fp: &spi10 { + pinctrl-0 = <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + cros_ec_fp: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; @@ -937,7 +1009,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi0_default { +&qup_spi0_cs_gpio { pinconf { pins = "gpio34", "gpio35", "gpio36", "gpio37"; drive-strength = <2>; @@ -945,7 +1017,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi6_default { +&qup_spi6_cs_gpio { pinconf { pins = "gpio59", "gpio60", "gpio61", "gpio62"; drive-strength = <2>; @@ -953,7 +1025,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi10_default { +&qup_spi10_cs_gpio { pinconf { pins = "gpio86", "gpio87", "gpio88", "gpio89"; drive-strength = <2>; @@ -1164,6 +1236,19 @@ ap_spi_fp: &spi10 { }; }; + en_pp3300_hub: en-pp3300-hub { + pinmux { + pins = "gpio84"; + function = "gpio"; + }; + + pinconf { + pins = "gpio84"; + drive-strength = <2>; + bias-disable; + }; + }; + fpmcu_boot0: fpmcu-boot0 { pinmux { pins = "gpio10"; @@ -1310,7 +1395,8 @@ ap_spi_fp: &spi10 { pinconf { pins = "gpio24"; - bias-pull-up; + /* Has external pullup */ + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 6678f1e8e395..22b832fc62e3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2,7 +2,7 @@ /* * SC7180 SoC device tree source * - * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,dispcc-sc7180.h> @@ -31,6 +31,8 @@ chosen { }; aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -525,6 +527,11 @@ opp-hz = /bits/ 64 <2400000000>; opp-peak-kBps = <8532000 23347200>; }; + + cpu6_opp16: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8532000 23347200>; + }; }; memory@80000000 { @@ -660,7 +667,7 @@ }; qfprom: efuse@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,sc7180-qfprom", "qcom,qfprom"; reg = <0 0x00784000 0 0x8ff>, <0 0x00780000 0 0x7a0>, <0 0x00782000 0 0x100>, @@ -1394,7 +1401,8 @@ ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; - iommus = <&apps_smmu 0x440 0x3>; + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; reg = <0 0x1e40000 0 0x7000>, <0 0x1e47000 0 0x2000>, <0 0x1e04000 0 0x2c000>; @@ -1402,8 +1410,8 @@ "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -1595,6 +1603,19 @@ }; }; + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pinmux { + pins = "gpio34", "gpio35", + "gpio36"; + function = "qup00"; + }; + + pinmux-cs { + pins = "gpio37"; + function = "gpio"; + }; + }; + qup_spi1_default: qup-spi1-default { pinmux { pins = "gpio0", "gpio1", @@ -1603,6 +1624,19 @@ }; }; + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pinmux { + pins = "gpio0", "gpio1", + "gpio2"; + function = "qup01"; + }; + + pinmux-cs { + pins = "gpio3"; + function = "gpio"; + }; + }; + qup_spi3_default: qup-spi3-default { pinmux { pins = "gpio38", "gpio39", @@ -1611,6 +1645,19 @@ }; }; + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pinmux { + pins = "gpio38", "gpio39", + "gpio40"; + function = "qup03"; + }; + + pinmux-cs { + pins = "gpio41"; + function = "gpio"; + }; + }; + qup_spi5_default: qup-spi5-default { pinmux { pins = "gpio25", "gpio26", @@ -1619,6 +1666,19 @@ }; }; + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pinmux { + pins = "gpio25", "gpio26", + "gpio27"; + function = "qup05"; + }; + + pinmux-cs { + pins = "gpio28"; + function = "gpio"; + }; + }; + qup_spi6_default: qup-spi6-default { pinmux { pins = "gpio59", "gpio60", @@ -1627,6 +1687,19 @@ }; }; + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pinmux { + pins = "gpio59", "gpio60", + "gpio61"; + function = "qup10"; + }; + + pinmux-cs { + pins = "gpio62"; + function = "gpio"; + }; + }; + qup_spi8_default: qup-spi8-default { pinmux { pins = "gpio42", "gpio43", @@ -1635,6 +1708,19 @@ }; }; + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pinmux { + pins = "gpio42", "gpio43", + "gpio44"; + function = "qup12"; + }; + + pinmux-cs { + pins = "gpio45"; + function = "gpio"; + }; + }; + qup_spi10_default: qup-spi10-default { pinmux { pins = "gpio86", "gpio87", @@ -1643,6 +1729,19 @@ }; }; + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pinmux { + pins = "gpio86", "gpio87", + "gpio88"; + function = "qup14"; + }; + + pinmux-cs { + pins = "gpio89"; + function = "gpio"; + }; + }; + qup_spi11_default: qup-spi11-default { pinmux { pins = "gpio53", "gpio54", @@ -1651,6 +1750,19 @@ }; }; + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pinmux { + pins = "gpio53", "gpio54", + "gpio55"; + function = "qup15"; + }; + + pinmux-cs { + pins = "gpio56"; + function = "gpio"; + }; + }; + qup_uart0_default: qup-uart0-default { pinmux { pins = "gpio34", "gpio35", @@ -1742,6 +1854,45 @@ }; }; + sec_mi2s_active: sec-mi2s-active { + pinmux { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + + pinconf { + pins = "gpio57"; + drive-strength = <8>; + bias-pull-up; + }; + }; + sdc1_on: sdc1-on { pinconf-clk { pins = "sdc1_clk"; @@ -1907,6 +2058,8 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; @@ -1958,7 +2111,7 @@ }; adreno_smmu: iommu@5040000 { - compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; + compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0 0x05040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; @@ -2792,6 +2945,18 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sc7180-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -2811,7 +2976,7 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "mdp0-mem"; iommus = <&apps_smmu 0x800 0x2>; @@ -3389,6 +3554,36 @@ #power-domain-cells = <1>; }; + lpass_cpu: lpass@62f00000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + reg-names = "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + }; + lpass_hm: clock-controller@63000000 { compatible = "qcom,sc7180-lpasshm"; reg = <0 0x63000000 0 0x28>; @@ -3402,7 +3597,7 @@ thermal-zones { cpu0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -3451,7 +3646,7 @@ }; cpu1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -3500,7 +3695,7 @@ }; cpu2-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -3549,7 +3744,7 @@ }; cpu3-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -3598,7 +3793,7 @@ }; cpu4-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -3647,7 +3842,7 @@ }; cpu5-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -3696,7 +3891,7 @@ }; cpu6-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 9>; @@ -3737,7 +3932,7 @@ }; cpu7-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 10>; @@ -3778,7 +3973,7 @@ }; cpu8-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 11>; @@ -3819,7 +4014,7 @@ }; cpu9-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 12>; @@ -3860,7 +4055,7 @@ }; aoss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -3881,7 +4076,7 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -3901,7 +4096,7 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -3921,16 +4116,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0_crit { @@ -3939,19 +4134,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1_crit { @@ -3960,10 +4162,17 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; aoss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -3984,7 +4193,7 @@ }; cwlan-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -4005,7 +4214,7 @@ }; audio-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -4026,7 +4235,7 @@ }; ddr-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -4047,7 +4256,7 @@ }; q6-hvx-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -4068,7 +4277,7 @@ }; camera-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -4089,7 +4298,7 @@ }; mdm-core-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -4110,7 +4319,7 @@ }; mdm-dsp-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -4131,7 +4340,7 @@ }; npu-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 8>; @@ -4152,7 +4361,7 @@ }; video-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 9>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index deb928d303c2..37d5cc32f6b6 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -830,7 +830,7 @@ status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x1f000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -944,7 +944,7 @@ status = "disabled"; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x1f000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 64fc1bfd66fa..216a74f0057c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -633,6 +633,15 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +/* + * Cheza fw does not properly program the GPU aperture to allow the + * GPU to update the SMMU pagetables for context switches. Work + * around this by dropping the "qcom,adreno-smmu" compat string. + */ +&adreno_smmu { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; +}; + &mss_pil { iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; @@ -644,10 +653,12 @@ ap_ts_i2c: &i2c14 { &qupv3_id_0 { status = "okay"; + iommus = <&apps_smmu 0x0 0x3>; }; &qupv3_id_1 { status = "okay"; + iommus = <&apps_smmu 0x6c0 0x3>; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 40e8c11f23ab..bcf888381f14 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1120,9 +1120,12 @@ clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -1137,6 +1140,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1150,6 +1157,9 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1163,6 +1173,9 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1178,6 +1191,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1191,6 +1208,9 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1204,6 +1224,9 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1219,6 +1242,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1232,6 +1259,9 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1245,6 +1275,9 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1260,6 +1293,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1273,6 +1310,9 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1286,6 +1326,9 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1301,6 +1344,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1314,6 +1361,9 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1327,6 +1377,9 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1342,6 +1395,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1355,6 +1412,9 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1368,6 +1428,9 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1383,6 +1446,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1396,6 +1463,9 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1409,6 +1479,9 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1437,6 +1510,9 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1450,6 +1526,9 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -1460,9 +1539,12 @@ clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -1477,6 +1559,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1490,6 +1576,9 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1503,6 +1592,9 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1518,6 +1610,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1531,6 +1627,9 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1544,6 +1643,9 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1559,6 +1661,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1572,6 +1678,9 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1585,6 +1694,9 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1600,6 +1712,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1613,6 +1729,9 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1626,6 +1745,9 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1641,6 +1763,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1654,6 +1780,9 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1667,6 +1796,9 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1682,6 +1814,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1695,6 +1831,9 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1708,6 +1847,9 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1723,6 +1865,10 @@ #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1736,6 +1882,9 @@ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1749,6 +1898,9 @@ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1765,6 +1917,10 @@ power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; status = "disabled"; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; }; spi15: spi@a9c000 { @@ -1777,6 +1933,9 @@ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1790,6 +1949,9 @@ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -2138,10 +2300,41 @@ }; }; + cryptobam: dma@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc 15>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely = <1>; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,crypto-v5.4"; + reg = <0 0x01dfa000 0 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AHB_CLK>, + <&rpmhcc 15>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + ipa: ipa@1e40000 { compatible = "qcom,sdm845-ipa"; - iommus = <&apps_smmu 0x720 0x3>; + iommus = <&apps_smmu 0x720 0x0>, + <&apps_smmu 0x722 0x0>; reg = <0 0x1e40000 0 0x7000>, <0 0x1e47000 0 0x2000>, <0 0x1e04000 0 0x2c000>; @@ -2149,8 +2342,8 @@ "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -3661,6 +3854,9 @@ iommus = <&apps_smmu 0x10a0 0x8>, <&apps_smmu 0x10b0 0x0>; memory-region = <&venus_mem>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; + interconnect-names = "video-mem", "cpu-cfg"; video-core0 { compatible = "venus-decoder"; @@ -4103,7 +4299,7 @@ }; adreno_smmu: iommu@5040000 { - compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; + compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0 0x5040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; @@ -4484,7 +4680,7 @@ }; }; - slimbam: dma@17184000 { + slimbam: dma-controller@17184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index d03ca3190746..13fdd02cffe6 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -8,6 +8,8 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -21,6 +23,47 @@ aliases { hsuart0 = &uart6; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; + + lid { + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + + mode { + gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + }; + }; + + panel { + compatible = "boe,nv133fhm-n61"; + no-hpd; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; }; &adsp_pas { @@ -232,16 +275,30 @@ }; }; -&apps_smmu { - /* TODO: Figure out how to survive booting with this enabled */ - status = "disabled"; -}; - &cdsp_pas { firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; status = "okay"; }; +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -264,23 +321,28 @@ status = "okay"; clock-frequency = <400000>; - hid@15 { + tsel: hid@15 { compatible = "hid-over-i2c"; reg = <0x15>; hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_hid_active>; }; - hid@2c { + tsc2: hid@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; - interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&i2c2_hid_active>; + pinctrl-0 = <&i2c3_hid_active>; + + status = "disabled"; }; }; @@ -288,15 +350,54 @@ status = "okay"; clock-frequency = <400000>; - hid@10 { + tsc1: hid@10 { compatible = "hid-over-i2c"; reg = <0x10>; hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&i2c6_hid_active>; + pinctrl-0 = <&i2c5_hid_active>; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&sn65dsi86_pin_active>; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; }; }; @@ -304,7 +405,7 @@ status = "okay"; clock-frequency = <400000>; - hid@5c { + ecsh: hid@5c { compatible = "hid-over-i2c"; reg = <0x5c>; hid-descr-addr = <0x1>; @@ -312,14 +413,30 @@ interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&i2c12_hid_active>; + pinctrl-0 = <&i2c11_hid_active>; }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; }; +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + &qup_i2c12_default { drive-strength = <2>; bias-disable; @@ -426,8 +543,14 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - i2c2_hid_active: i2c2-hid-active { - pins = <37>; + sn65dsi86_pin_active: sn65dsi86-enable { + pins = "gpio96"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_hid_active: i2c2-hid-active { + pins = "gpio37"; function = "gpio"; input-enable; @@ -435,8 +558,8 @@ drive-strength = <2>; }; - i2c6_hid_active: i2c6-hid-active { - pins = <125>; + i2c5_hid_active: i2c5-hid-active { + pins = "gpio125"; function = "gpio"; input-enable; @@ -444,8 +567,8 @@ drive-strength = <2>; }; - i2c12_hid_active: i2c12-hid-active { - pins = <92>; + i2c11_hid_active: i2c11-hid-active { + pins = "gpio92"; function = "gpio"; input-enable; @@ -454,13 +577,29 @@ }; wcd_intr_default: wcd_intr_default { - pins = <54>; + pins = "gpio54"; function = "gpio"; input-enable; bias-pull-down; drive-strength = <2>; }; + + lid_pin_active: lid-pin { + pins = "gpio124"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + mode_pin_active: mode-pin { + pins = "gpio95"; + function = "gpio"; + + input-enable; + bias-disable; + }; }; &uart6 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts new file mode 100644 index 000000000000..fb2cf3d987a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 HDK"; + compatible = "qcom,sm8150-hdk", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&remoteproc_adsp { + status = "okay"; + + firmware-name = "qcom/sm8150/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + + firmware-name = "qcom/sm8150/cdsp.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + + firmware-name = "qcom/sm8150/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 6c6325c3af59..3774f8e63416 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -369,14 +369,22 @@ &remoteproc_adsp { status = "okay"; + firmware-name = "qcom/sm8150/adsp.mdt"; }; &remoteproc_cdsp { status = "okay"; + firmware-name = "qcom/sm8150/cdsp.mdt"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/modem.mdt"; }; &remoteproc_slpi { status = "okay"; + firmware-name = "qcom/sm8150/slpi.mdt"; }; &tlmm { @@ -429,3 +437,12 @@ &usb_1_dwc3 { dr_mode = "peripheral"; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index f0a872e02686..5270bda7418f 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -490,6 +490,13 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8150-llcc"; + reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -502,6 +509,8 @@ resets = <&gcc GCC_UFS_PHY_BCR>; reset-names = "rst"; + iommus = <&apps_smmu 0x300 0>; + clock-names = "core_clk", "bus_aggr_clk", @@ -789,6 +798,597 @@ }; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel2_in2: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&replicator1_in>; + }; + }; + }; + + in-ports { + port { + replicator_in0: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in0>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x05e0 0x0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + replicator@604a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x0604a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@6b08000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&swao_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + swao_funnel_in: endpoint { + remote-endpoint = <&replicator1_out>; + }; + }; + }; + }; + + etf@6b09000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b09000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b0a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b0a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&swao_etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel2_in2>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + remoteproc_cdsp: remoteproc@8300000 { compatible = "qcom,sm8150-cdsp-pas"; reg = <0x0 0x08300000 0x0 0x4040>; @@ -836,6 +1436,19 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + usb_1_qmpphy: phy@88e9000 { compatible = "qcom,sm8150-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, @@ -885,6 +1498,37 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8150-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>, + <0 0x088eb600 0 0x200>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -922,6 +1566,7 @@ compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; @@ -929,6 +1574,51 @@ }; }; + usb_2: usb@a8f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; @@ -987,6 +1677,94 @@ cell-index = <0>; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,sm8150-adsp-pas"; reg = <0x0 0x17300000 0x0 0x4040>; @@ -1206,6 +1984,29 @@ #freq-domain-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_mem>; + clock-names = "cxo_ref_clk_pin", "qdss"; + clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0640 0x1>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts new file mode 100644 index 000000000000..c3a2c5aa6fe9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8250 HDK"; + compatible = "qcom,sm8250-hdk", "qcom,sm8250"; + + aliases { + serial0 = &uart12; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_3p3: ldo16 { + regulator-name = "vreg_l16a_3p3"; + regulator-min-microvolt = <3024000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p92: ldo18 { + regulator-name = "vreg_l18a_0p92"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_l1f_cam_dvdd1_1p1: ldo1 { + regulator-name = "vreg_l1f_cam_dvdd1_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_cam_dvdd0_1p2: ldo2 { + regulator-name = "vreg_l2f_cam_dvdd0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_cam_dvdd2_1p05: ldo3 { + regulator-name = "vreg_l3f_cam_dvdd2_1p05"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_cam_avdd0_2p85: ldo5 { + regulator-name = "vreg_l5f_cam_avdd0_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_cam_avdd1_2p8: ldo6 { + regulator-name = "vreg_l6f_cam_avdd1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-max-microamp = <89900>; + vdda-pll-supply = <&vreg_l9a_1p2>; + vdda-pll-max-microamp = <18800>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index fd194ed7fbc8..dea00f19711d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -14,7 +14,7 @@ / { model = "Qualcomm Technologies, Inc. SM8250 MTP"; - compatible = "qcom,sm8250-mtp"; + compatible = "qcom,sm8250-mtp", "qcom,sm8250"; aliases { serial0 = &uart12; @@ -378,6 +378,10 @@ /* rtc6226 @ 64 */ }; +&pm8150_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d057d85a19fb..65acd1f381eb 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -93,10 +93,10 @@ qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_0: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; }; }; }; @@ -110,8 +110,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_100: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -124,8 +124,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_200: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -138,8 +138,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_300: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -152,8 +152,8 @@ qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_400: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -166,8 +166,8 @@ qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_500: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -181,8 +181,8 @@ qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_600: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -195,8 +195,8 @@ qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; L2_700: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; }; @@ -429,6 +429,13 @@ #mbox-cells = <2>; }; + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + qup_opp_table: qup-opp-table { compatible = "operating-points-v2"; @@ -456,6 +463,7 @@ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x63 0x0>; ranges; status = "disabled"; @@ -662,6 +670,7 @@ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x5a3 0x0>; ranges; status = "disabled"; @@ -924,6 +933,7 @@ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; ranges; status = "disabled"; @@ -1172,6 +1182,8 @@ power-domains = <&gcc UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>; + clock-names = "core_clk", "bus_aggr_clk", @@ -1417,8 +1429,35 @@ mboxes = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_GLINK_QMP>; - label = "lpass"; + label = "slpi"; qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -1455,8 +1494,201 @@ mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_GLINK_QMP>; - label = "lpass"; + label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1001 0x0460>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1002 0x0460>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0460>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0460>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0460>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1008 0x0460>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8250-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8250-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x4a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; }; }; @@ -1481,6 +1713,96 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_1: usb@a6f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -2156,6 +2478,111 @@ }; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + }; + adsp: remoteproc@17300000 { compatible = "qcom,sm8250-adsp-pas"; reg = <0 0x17300000 0 0x100>; @@ -2192,6 +2619,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index dffefe030a76..3b8b03705917 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb @@ -10,6 +11,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb @@ -22,6 +24,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb @@ -39,6 +42,7 @@ dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi index dac6ff49020f..7ce986f0a06f 100644 --- a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi +++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi @@ -61,7 +61,7 @@ }; }; -&MIPI_PARENT_I2C { +&MIPI_OV5645_PARENT_I2C { ov5645: ov5645@3c { compatible = "ovti,ov5645"; reg = <0x3c>; @@ -77,7 +77,9 @@ }; }; }; +}; +&MIPI_IMX219_PARENT_I2C { imx219: imx219@10 { compatible = "sony,imx219"; reg = <0x10>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 66c9153b3101..e66b5b36e489 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -223,6 +223,29 @@ #clock-cells = <0>; clock-frequency = <25000000>; }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; }; &audio_clk_a { @@ -427,20 +450,19 @@ interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hd3ss3220_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; }; }; }; @@ -714,9 +736,20 @@ status = "okay"; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 97272f5fa0ab..8ac167aa18f0 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -55,7 +55,8 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-id"; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 33daa9570684..801ea54b027c 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -21,7 +21,6 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi index 3046c07a288b..929f4a1d3f90 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi @@ -91,7 +91,11 @@ #clock-cells = <1>; clock-frequency = <12288000 11289600>; - /* update <audio_clk_b> to <cs2000> */ + /* + * Update <audio_clk_b> to <cs2000> + * Switch SW2404 should be at position 1 so that clock from + * CS2000 is connected to AUDIO_CLKB_A + */ clocks = <&cpg CPG_MOD 1005>, <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi new file mode 100644 index 000000000000..c62ddb9b2ba5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[HMN] MIPI common parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#define MIPI_OV5645_PARENT_I2C i2c2 +#define MIPI_IMX219_PARENT_I2C i2c3 +#include "aistarvision-mipi-adapter-2.1.dtsi" + +&csi20 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + csi20_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&imx219_ep>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&imx219 { + port { + imx219_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <456000000>; + remote-endpoint = <&csi40_in>; + }; + }; +}; + +&ov5645 { + enable-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; + + port { + ov5645_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi20_in>; + }; + }; +}; + +&pfc { + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; +}; + +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 178401a34cbf..202c4fc88bd5 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -19,11 +19,10 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts new file mode 100644 index 000000000000..5c91e0d7e67b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M board + * connected with aistarvision-mipi-v2-adapter board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1-hihope-rzg2m-ex.dts" +#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M with sub board connected with aistarvision-mipi-v2-adapter board"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; +}; + +/* + * On RZ/G2M SoC LSI V1.3 CSI40 supports only 4 lane mode. + * HiHope RZ/G2M Rev.4.0 board is based on LSI V1.3 so disable csi40 and + * imx219 as the imx219 endpoint driver supports only 2 lane mode. + */ +&csi40 { + status = "disabled"; +}; + +&imx219 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index c15f1c571eb0..d37ec42a1caa 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1115,6 +1115,8 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts new file mode 100644 index 000000000000..ce8e3bcc7dc9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N board + * connected with aistarvision-mipi-v2-adapter board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1-hihope-rzg2n-ex.dts" +#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board connected with aistarvision-mipi-v2-adapter board"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 39a1a26ffb54..83523916d360 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -989,6 +989,8 @@ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 26aee004a44e..ea87cb5a459c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -129,6 +129,29 @@ #clock-cells = <0>; clock-frequency = <74250000>; }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; }; &audio_clk_a { @@ -186,20 +209,19 @@ interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hd3ss3220_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; }; }; }; @@ -405,9 +427,20 @@ status = "okay"; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts index f0829e905506..e7b4a929bb17 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts @@ -8,7 +8,8 @@ /dts-v1/; #include "r8a774c0-ek874.dts" -#define MIPI_PARENT_I2C i2c3 +#define MIPI_OV5645_PARENT_I2C i2c3 +#define MIPI_IMX219_PARENT_I2C i2c3 #include "aistarvision-mipi-adapter-2.1.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index f27d9b2eb996..e0e54342cd4c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -960,6 +960,7 @@ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts new file mode 100644 index 000000000000..46adb6efb5e6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H board + * connected with aistarvision-mipi-v2-adapter board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774e1-hihope-rzg2h-ex.dts" +#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2H with sub board connected with aistarvision-mipi-v2-adapter board"; + compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index c29643442e91..1333b02d623a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1218,6 +1218,8 @@ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index cef9da4376a3..e5922329a4b8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -118,7 +118,7 @@ }; &pca9654 { - pcie_sata_switch { + pcie-sata-switch-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-low; /* enable SATA by default */ diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 18ce0face72b..9d60bcf69e4f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -1250,6 +1250,8 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -2725,6 +2727,44 @@ status = "disabled"; }; + pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a7795-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@ee800000 { + compatible = "renesas,r8a7795-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xee800000 0 0x80000>, + <0x0 0xee900000 0 0x100000>, + <0x0 0xeea00000 0 0x200000>, + <0x0 0xc0000000 0 0x8000000>, + <0x0 0xc8000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-names = "pcie"; + resets = <&cpg 318>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + status = "disabled"; + }; + imr-lx4@fe860000 { compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4"; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index f379c8d1511d..53b9aa26c9b1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -1126,6 +1126,8 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts new file mode 100644 index 000000000000..6ec958348eb0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3ULCB Kingfisher board + * + * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com> + */ + +#include "r8a77961-ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3ULCB Kingfisher board based on r8a77961"; + compatible = "shimafuji,kingfisher", "renesas,m3ulcb", + "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 1ba30313c8b8..4b737c616257 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1012,11 +1012,23 @@ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + can0: can@e6c30000 { + reg = <0 0xe6c30000 0 0x1000>; + /* placeholder */ + }; + + can1: can@e6c38000 { + reg = <0 0xe6c38000 0 0x1000>; + /* placeholder */ + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -1187,6 +1199,68 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77961", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77961", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77961", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77961", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin0: video@e6ef0000 { reg = <0 0xe6ef0000 0 0x1000>; /* placeholder */ diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 5cef64605464..d7e621101af7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -55,7 +55,7 @@ }; &pca9654 { - pcie_sata_switch { + pcie-sata-switch-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-low; /* enable SATA by default */ diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index c355460e5f7f..4a913df17b1d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -988,6 +988,8 @@ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -1550,6 +1552,126 @@ }; }; + drif00: rif@e6f40000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x84>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 515>; + renesas,bonding = <&drif01>; + status = "disabled"; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x84>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 514>; + renesas,bonding = <&drif00>; + status = "disabled"; + }; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x84>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x84>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + status = "disabled"; + }; + + drif20: rif@e6f80000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f80000 0 0x84>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 511>; + clock-names = "fck"; + dmas = <&dmac1 0x28>, <&dmac2 0x28>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 511>; + renesas,bonding = <&drif21>; + status = "disabled"; + }; + + drif21: rif@e6f90000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f90000 0 0x84>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 510>; + clock-names = "fck"; + dmas = <&dmac1 0x2a>, <&dmac2 0x2a>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 510>; + renesas,bonding = <&drif20>; + status = "disabled"; + }; + + drif30: rif@e6fa0000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fa0000 0 0x84>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 509>; + clock-names = "fck"; + dmas = <&dmac1 0x2c>, <&dmac2 0x2c>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 509>; + renesas,bonding = <&drif31>; + status = "disabled"; + }; + + drif31: rif@e6fb0000 { + compatible = "renesas,r8a77965-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fb0000 0 0x84>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 508>; + clock-names = "fck"; + dmas = <&dmac1 0x2e>, <&dmac2 0x2e>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 508>; + renesas,bonding = <&drif30>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 5c28f303e911..874a7fc2730b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -81,7 +81,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-id"; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 668a1ece9af0..7417cf5fea0f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -102,7 +102,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-id"; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index baf8cc821564..5a5d5649332a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -615,6 +615,8 @@ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_rt 3>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index d6cae90d7fd9..ec7ca72399ec 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -667,6 +667,8 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <2000>; iommus = <&ipmmu_ds1 33>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 33d7e657bd9c..87d41bc076a9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -938,6 +938,7 @@ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index cd7ca9774196..e1af7c4782f4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -628,6 +628,7 @@ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <1800>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 1bf77957d2c2..6c643ed74fc5 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -324,7 +324,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 202177706cde..e9ed2597f1c2 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -143,49 +143,49 @@ interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - audio_out_off { + audio-out-off-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */ output-high; line-name = "Audio_Out_OFF"; }; - hub_pwen { + hub-pwen-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB pwen"; }; - hub_rst { + hub-rst-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB rst"; }; - otg_extlpn { + otg-extlpn-hog { gpio-hog; gpios = <9 GPIO_ACTIVE_HIGH>; output-high; line-name = "OTG EXTLPn"; }; - otg_offvbusn { + otg-offvbusn-hog { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; output-low; line-name = "OTG OFFVBUSn"; }; - sd-wifi-mux { + sd-wifi-mux-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; output-low; /* Connect WL1837 */ line-name = "SD WiFi mux"; }; - snd_rst { + snd-rst-hog { gpio-hog; gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */ output-high; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index a2e085db87c5..8f8d7371d8e2 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -144,7 +144,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 26661c7b736b..1ab55a124a87 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb @@ -26,6 +29,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi new file mode 100644 index 000000000000..08b0b9fbcbc9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/ { + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; /* +5V */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&xin32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + + vcc3v3_btreg: vcc3v3-btreg { + compatible = "regulator-gpio"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable_h>; + regulator-name = "btreg-gpio-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + states = <3300000 0x0>; + }; + + vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_rf_aux_mod"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <800>; + vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi new file mode 100644 index 000000000000..bf10a3d29fca --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi" + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio_pwrseq { + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; +}; + +&vcc3v3_btreg { + enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi new file mode 100644 index 000000000000..449b8eb6454e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + panel { + compatible = "yes-optoelectronics,ytc700tlag-05-201c"; + backlight = <&backlight>; + data-mapping = "vesa-24"; + power-supply = <&vcc3v3_lcd>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi_dphy { + status = "okay"; +}; + +/* LVDS_B(secondary) */ +&lvds { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts new file mode 100644 index 000000000000..47aa30505a42 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2.dtsi" +#include "px30-engicam-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core", + "rockchip,px30"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight>; + power-supply = <&vcc3v3_lcd>; + data-mapping = "vesa-24"; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi_dphy { + status = "okay"; +}; + +&lvds { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts new file mode 100644 index 000000000000..5a0ecb8faecf --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2.dtsi" +#include "px30-engicam-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0"; + compatible = "engicam,px30-core-ctouch2", "engicam,px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts new file mode 100644 index 000000000000..d759478e1c84 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-edimm2.2.dtsi" +#include "px30-engicam-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio_pwrseq { + reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>; +}; + +&vcc3v3_btreg { + enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi new file mode 100644 index 000000000000..cdacd3483600 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons + * Copyright (c) 2020 Amarula Solutons(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "engicam,px30-core", "rockchip,px30"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-boot-on; + regulator-name = "vcc3v3_lcd"; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 337681038519..97fb93e1cc00 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -18,6 +18,30 @@ stdout-path = "serial2:115200n8"; }; + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 1>, + <&saradc 2>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <172 772>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <278 815>; + linux,code = <ABS_Y>; + }; + }; + backlight: backlight { compatible = "pwm-backlight"; power-supply = <&vcc_bl>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index b70ffb1c6a63..19959bfba451 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -104,6 +104,14 @@ }; }; +&analog_sound { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_arm>; }; @@ -161,6 +169,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -270,6 +282,14 @@ }; }; +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + &io_domains { status = "okay"; @@ -334,6 +354,7 @@ }; &usb20_otg { + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index bbdb19a3e85d..db0d5c8e5f96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1237,8 +1237,8 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>, - <1 RK_PB0 1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB0 1 &pcfg_pull_up>; }; uart0_cts: uart0-cts { @@ -1256,8 +1256,8 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>, - <3 RK_PA6 4 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>, + <3 RK_PA6 4 &pcfg_pull_up>; }; uart1_cts: uart1-cts { @@ -1275,15 +1275,15 @@ uart2-0 { uart2m0_xfer: uart2m0-xfer { - rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>, - <1 RK_PA1 2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>, + <1 RK_PA1 2 &pcfg_pull_up>; }; }; uart2-1 { uart2m1_xfer: uart2m1-xfer { - rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>, - <2 RK_PA1 1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, + <2 RK_PA1 1 &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 60cd1c18cd4e..beee5fbb3443 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -296,6 +296,52 @@ camera: &i2c7 { /* 24M mclk is shared between world and user cameras */ pinctrl-0 = <&i2c7_xfer &test_clkout1>; + + /* Rear-facing camera */ + wcam: camera@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&wcam_rst>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dvdd-supply = <&pp1250_cam>; + dovdd-supply = <&pp1800_s0>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2>; + }; + }; + }; + + /* Front-facing camera */ + ucam: camera@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&ucam_rst>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800_s0>; + dvdd-supply = <&pp1800_s0>; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; + }; }; &cdn_dp { @@ -353,10 +399,38 @@ camera: &i2c7 { gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */ }; +&isp0 { + status = "okay"; + + ports { + port@0 { + mipi_in_wcam: endpoint@0 { + reg = <0>; + remote-endpoint = <&wcam_out>; + data-lanes = <1 2>; + }; + + mipi_in_ucam: endpoint@1 { + reg = <1>; + remote-endpoint = <&ucam_out>; + data-lanes = <1>; + }; + }; + }; +}; + +&isp0_mmu { + status = "okay"; +}; + &max98357a { sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; +&mipi_dphy_rx0 { + status = "okay"; +}; + &mipi_dsi { status = "okay"; clock-master; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts new file mode 100644 index 000000000000..2a561be724b2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io> + */ + +/* + * The Kobol Helios64 is a board designed to operate as a NAS and optionally + * ships with an enclosing that can host five 2.5" hard disks. + * + * See https://wiki.kobol.io/helios64/intro/ for further details. + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Kobol Helios64"; + compatible = "kobol,helios64", "rockchip,rk3399"; + + avdd_1v8_s0: avdd-1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "avdd_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>; + + led-0 { + label = "helios64:green:status"; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-1 { + label = "helios64:red:fault"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + vcc1v8_sys_s0: vcc1v8-sys-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_sys_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc1v8_sys_s3>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v0_sd"; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin_bkup>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc12v_dcin_bkup: vcc12v-dcin-bkup { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin_bkup"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +/* + * The system doesn't run stable with cpu freq enabled, so disallow the lower + * frequencies until this problem is properly understood and resolved. + */ +&cluster0_opp { + /delete-node/ opp00; + /delete-node/ opp01; + /delete-node/ opp02; + /delete-node/ opp03; + /delete-node/ opp04; +}; + +&cluster1_opp { + /delete-node/ opp00; + /delete-node/ opp01; + /delete-node/ opp02; + /delete-node/ opp03; + /delete-node/ opp04; + /delete-node/ opp05; + /delete-node/ opp06; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clock-parents = <&clkin_gmac>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &gphy_reset>; + rx_delay = <0x20>; + tx_delay = <0x28>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys_s3>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys_s3>; + vddio-supply = <&vcc3v0_s3>; + wakeup-source; + #clock-cells = <1>; + + regulators { + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_sys_s3: DCDC_REG4 { + regulator-name = "vcc1v8_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio_s0: LDO_REG4 { + regulator-name = "vcc_sdio_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v0_s3: LDO_REG8 { + regulator-name = "vcc3v0_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + temp@4c { + compatible = "national,lm75"; + reg = <0x4c>; + }; +}; + +&io_domains { + audio-supply = <&vcc1v8_sys_s0>; + bt656-supply = <&vcc1v8_sys_s0>; + gpio1830-supply = <&vcc3v0_s3>; + sdmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&pinctrl { + gmac { + gphy_reset: gphy-reset { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + leds { + sys_grn_led_on: sys-grn-led-on { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + sys_red_led_on: sys-red-led-on { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc3v0-sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc3v0_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vqmmc-supply = <&vcc1v8_sys_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 6163ae8063a7..ad7c4d00888f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -7,6 +7,7 @@ #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" +#include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -531,6 +532,43 @@ pinctrl-names = "default"; pinctrl-0 = <&chg_cc_int_l>; vbus-supply = <&vbus_typec>; + + typec_con: connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec_hs: endpoint { + remote-endpoint = <&u2phy0_typec_hs>; + }; + }; + port@1 { + reg = <1>; + typec_ss: endpoint { + remote-endpoint = <&tcphy0_typec_ss>; + }; + }; + port@2 { + reg = <2>; + typec_dp: endpoint { + remote-endpoint = <&tcphy0_typec_dp>; + }; + }; + }; + }; }; }; @@ -717,6 +755,22 @@ status = "okay"; }; +&tcphy0_dp { + port { + tcphy0_typec_dp: endpoint { + remote-endpoint = <&typec_dp>; + }; + }; +}; + +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -739,6 +793,12 @@ phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; }; &u2phy1 { @@ -799,7 +859,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 678a336010bf..fb7599f07af4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -111,10 +111,6 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; }; vdd_log: vdd-log { @@ -362,8 +358,6 @@ regulator-name = "vcc_cam"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -373,8 +367,6 @@ regulator-name = "vcc_mipi"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -440,8 +432,9 @@ }; &i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,capture-channels = <2>; + rockchip,playback-channels = <2>; status = "okay"; }; @@ -680,7 +673,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 7a9a7aca86c6..f5dee5f447bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -331,7 +331,7 @@ status = "disabled"; }; - sdhci: sdhci@fe330000 { + sdhci: mmc@fe330000 { compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1726,6 +1726,32 @@ status = "disabled"; }; + isp0: isp0@ff910000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff910000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_ISP0>, + <&cru ACLK_ISP0_WRAPPER>, + <&cru HCLK_ISP0_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp0_mmu>; + phys = <&mipi_dphy_rx0>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + isp0_mmu: iommu@ff914000 { compatible = "rockchip,iommu"; reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 5d087be04af8..7257494d2831 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -353,6 +353,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vbus_host { usb1_en_oc: usb1-en-oc { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; @@ -371,6 +377,16 @@ pmu1830-supply = <&vcc_1v8>; }; +&sdio_pwrseq { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 533525229a8d..12591a854020 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -119,7 +119,6 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - status = "okay"; dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; @@ -473,6 +472,7 @@ interrupt-controller; interrupt-parent = <&intr_main_navss>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <179>; ti,interrupt-ranges = <0 0 256>; @@ -612,7 +612,6 @@ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; ti,num-rings = <818>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ - ti,dma-ring-reset-quirk; ti,sci = <&dmsc>; ti,sci-dev-id = <187>; msi-parent = <&inta_main_udmass>; @@ -770,8 +769,6 @@ clocks = <&k3_clks 104 0>; clock-names = "fck"; power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp1: mcasp@2b10000 { @@ -789,8 +786,6 @@ clocks = <&k3_clks 105 0>; clock-names = "fck"; power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp2: mcasp@2b20000 { @@ -808,8 +803,6 @@ clocks = <&k3_clks 106 0>; clock-names = "fck"; power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; cal: cal@6f03000 { @@ -834,7 +827,7 @@ }; }; - dss: dss@04a00000 { + dss: dss@4a00000 { compatible = "ti,am65x-dss"; reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ @@ -865,7 +858,7 @@ interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; + dma-coherent; dss_ports: ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 29aaf8dca6f6..7454c8cec0cc 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family MCU Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { @@ -135,7 +135,6 @@ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; ti,num-rings = <286>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ - ti,dma-ring-reset-quirk; ti,sci = <&dmsc>; ti,sci-dev-id = <195>; msi-parent = <&inta_main_udmass>; @@ -269,4 +268,44 @@ }; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,am654-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,am654-r5f"; + reg = <0x41000000 0x00008000>, + <0x41010000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <159>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 159 1>; + firmware-name = "am65x-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,am654-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 245 1>; + firmware-name = "am65x-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index d12dd89f3405..fe3043943906 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -29,11 +29,42 @@ #address-cells = <2>; #size-cells = <2>; ranges; + secure_ddr: secure-ddr@9e800000 { reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ alignment = <0x1000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0 0xa0000000 0 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0 0xa0100000 0 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0 0xa1000000 0 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0 0xa1100000 0 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a2000000 { + reg = <0x00 0xa2000000 0x00 0x00100000>; + alignment = <0x1000>; + no-map; + }; }; gpio-keys { @@ -211,7 +242,7 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart0 { @@ -325,14 +356,6 @@ disable-wp; }; -&dwc3_1 { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { pinctrl-names = "default"; pinctrl-0 = <&usb1_pins_default>; @@ -441,6 +464,18 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; +}; + +&mcu_r5fss0_core1 { + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; +}; + &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; @@ -486,3 +521,19 @@ phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; }; + +&mcasp0 { + status = "disabled"; +}; + +&mcasp1 { + status = "disabled"; +}; + +&mcasp2 { + status = "disabled"; +}; + +&dss { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index ef03e7636b66..331b388e1d1b 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -43,13 +43,6 @@ }; &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { - pinctrl-single,pins = < - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ - >; - }; - main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ @@ -79,7 +72,7 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart0 { @@ -89,7 +82,7 @@ &main_uart2 { /* MAIN UART 2 is used by R5F firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart3 { @@ -146,10 +139,6 @@ }; &main_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - exp1: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -165,16 +154,26 @@ }; }; +/* + * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be + * swapped on the CPB. + * + * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3. + * The i2c1 of the CPB (as it is labeled) is not connected to j7200. + */ &main_i2c1 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - exp4: gpio@20 { + exp3: gpio@20 { compatible = "ti,tca6408"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn", + "UB926_LOCK", "UB926_PWR_SW_CNTRL", + "UB926_TUNER_RESET", "UB926_GPIO_SPARE", ""; }; }; @@ -213,3 +212,9 @@ dr_mode = "otg"; maximum-speed = "high-speed"; }; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 72d6496e88dd..b0094212aa82 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -115,6 +115,120 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + main_ringacc: ringacc@3c000000 { compatible = "ti,am654-navss-ringacc"; reg = <0x00 0x3c000000 0x00 0x400000>, diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index eb2a78a53512..bb1fe9c12e44 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -270,4 +270,23 @@ mux-controls = <&hbmc_mux 0>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 1>; + assigned-clocks = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 6a98ba499bc2..7b5e9aa0324e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -48,6 +48,15 @@ }; }; +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ + J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + >; + }; +}; + &hbmc { /* OSPI and HBMC are muxed inside FSS, Bootloader will enable * appropriate node based on board detection @@ -63,3 +72,88 @@ reg = <0x00 0x00 0x4000000>; }; }; + +&mailbox0_cluster0 { + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp_som: gpio@21 { + compatible = "ti,tca6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0", + "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1", + "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL", + "GPIO_LIN_EN", "CAN_STB"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 52e121155563..60764366e22b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -67,6 +67,31 @@ regulator-boot-on; }; + vdd_mmc1: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv_alt: gpio-regulator-TLV71033 { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; + regulator-name = "tlv71033"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + sound0: sound@0 { compatible = "ti,j721e-cpb-audio"; model = "j721e-cpb"; @@ -106,6 +131,12 @@ >; }; + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ + >; + }; + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ @@ -221,7 +252,7 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart0 { @@ -295,6 +326,8 @@ &main_sdhci1 { /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv_alt>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; @@ -540,6 +573,46 @@ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; +&mcasp0 { + status = "disabled"; +}; + +&mcasp1 { + status = "disabled"; +}; + +&mcasp2 { + status = "disabled"; +}; + +&mcasp3 { + status = "disabled"; +}; + +&mcasp4 { + status = "disabled"; +}; + +&mcasp5 { + status = "disabled"; +}; + +&mcasp6 { + status = "disabled"; +}; + +&mcasp7 { + status = "disabled"; +}; + +&mcasp8 { + status = "disabled"; +}; + +&mcasp9 { + status = "disabled"; +}; + &mcasp10 { #sound-dai-cells = <0>; @@ -556,8 +629,10 @@ >; tx-num-evt = <0>; rx-num-evt = <0>; +}; - status = "okay"; +&mcasp11 { + status = "disabled"; }; &serdes0 { @@ -639,3 +714,7 @@ &pcie3_ep { status = "disabled"; }; + +&dss { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index e2a96b2c423c..b32df591c766 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family Main Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy.h> #include <dt-bindings/mux/mux.h> @@ -148,6 +148,7 @@ interrupt-controller; interrupt-parent = <&main_navss_intr>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <209>; ti,interrupt-ranges = <0 0 256>; @@ -345,8 +346,6 @@ #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - status = "okay"; - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; dma-names = "tx", "rx1", "rx2"; @@ -1081,7 +1080,11 @@ bus-width = <8>; mmc-hs400-1_8v; mmc-ddr-1_8v; - ti,otap-del-sel = <0x2>; + ti,otap-del-sel-legacy = <0xf>; + ti,otap-del-sel-mmc-hs = <0xf>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x6>; + ti,otap-del-sel-hs400 = <0x0>; ti,trm-icp = <0x8>; ti,strobe-sel = <0x77>; dma-coherent; @@ -1096,11 +1099,15 @@ clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; - ti,otap-del-sel = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0xc>; ti,trm-icp = <0x8>; ti,clkbuf-sel = <0x7>; dma-coherent; - no-1-8-v; }; main_sdhci2: sdhci@4f98000 { @@ -1112,11 +1119,15 @@ clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; - ti,otap-del-sel = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0xc>; ti,trm-icp = <0x8>; ti,clkbuf-sel = <0x7>; dma-coherent; - no-1-8-v; }; usbss0: cdns-usb@4104000 { @@ -1278,7 +1289,7 @@ }; }; - dss: dss@04a00000 { + dss: dss@4a00000 { compatible = "ti,j721e-dss"; reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ @@ -1327,8 +1338,6 @@ "common_s1", "common_s2"; - status = "disabled"; - dss_ports: ports { #address-cells = <1>; #size-cells = <0>; @@ -1350,8 +1359,6 @@ clocks = <&k3_clks 174 1>; clock-names = "fck"; power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp1: mcasp@2b10000 { @@ -1369,8 +1376,6 @@ clocks = <&k3_clks 175 1>; clock-names = "fck"; power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp2: mcasp@2b20000 { @@ -1388,8 +1393,6 @@ clocks = <&k3_clks 176 1>; clock-names = "fck"; power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp3: mcasp@2b30000 { @@ -1407,8 +1410,6 @@ clocks = <&k3_clks 177 1>; clock-names = "fck"; power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp4: mcasp@2b40000 { @@ -1426,8 +1427,6 @@ clocks = <&k3_clks 178 1>; clock-names = "fck"; power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp5: mcasp@2b50000 { @@ -1445,8 +1444,6 @@ clocks = <&k3_clks 179 1>; clock-names = "fck"; power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp6: mcasp@2b60000 { @@ -1464,8 +1461,6 @@ clocks = <&k3_clks 180 1>; clock-names = "fck"; power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp7: mcasp@2b70000 { @@ -1483,8 +1478,6 @@ clocks = <&k3_clks 181 1>; clock-names = "fck"; power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp8: mcasp@2b80000 { @@ -1502,8 +1495,6 @@ clocks = <&k3_clks 182 1>; clock-names = "fck"; power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp9: mcasp@2b90000 { @@ -1521,8 +1512,6 @@ clocks = <&k3_clks 183 1>; clock-names = "fck"; power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp10: mcasp@2ba0000 { @@ -1540,8 +1529,6 @@ clocks = <&k3_clks 184 1>; clock-names = "fck"; power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; mcasp11: mcasp@2bb0000 { @@ -1559,8 +1546,6 @@ clocks = <&k3_clks 185 1>; clock-names = "fck"; power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; - - status = "disabled"; }; watchdog0: watchdog@2200000 { @@ -1581,6 +1566,86 @@ assigned-clock-parents = <&k3_clks 253 5>; }; + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j721e-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5c00000 0x00008000>, + <0x5c10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 245 1>; + firmware-name = "j7-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5d00000 0x00008000>, + <0x5d10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <246>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 246 1>; + firmware-name = "j7-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@5e00000 { + compatible = "ti,j721e-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5e00000 0x00 0x5e00000 0x20000>, + <0x5f00000 0x00 0x5f00000 0x20000>; + power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@5e00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5e00000 0x00008000>, + <0x5e10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <247>; + ti,sci-proc-ids = <0x08 0xff>; + resets = <&k3_reset 247 1>; + firmware-name = "j7-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@5f00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5f00000 0x00008000>, + <0x5f10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <248>; + ti,sci-proc-ids = <0x09 0xff>; + resets = <&k3_reset 248 1>; + firmware-name = "j7-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + c66_0: dsp@4d80800000 { compatible = "ti,j721e-c66-dsp"; reg = <0x4d 0x80800000 0x00 0x00048000>, diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index e581cb1d87ee..6c44afae9187 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -353,4 +353,44 @@ ti,cpts-periodic-outputs = <2>; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j721e-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j721e-r5f"; + reg = <0x41000000 0x00008000>, + <0x41010000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <250>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 250 1>; + firmware-name = "j7-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j721e-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <251>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 251 1>; + firmware-name = "j7-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 5dc3ba739131..57720e6a04c5 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -26,6 +26,78 @@ no-map; }; + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + c66_1_dma_memory_region: c66-dma-memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; @@ -208,6 +280,42 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + &c66_0 { mboxes = <&mailbox0_cluster3 &mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 771f60e0346d..68923fbd0e89 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -99,6 +99,29 @@ }; }; + zynqmp_ipi { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipi_mailbox_pmu1: mailbox@ff990400 { + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + dcc: dcc { compatible = "arm,dcc"; status = "disabled"; @@ -128,6 +151,8 @@ compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; interrupts = <0 35 4>; + mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; + mbox-names = "tx", "rx"; }; zynqmp_clk: clock-controller { @@ -182,25 +207,6 @@ ranges; }; - amba_apu: axi@0 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0 0xffffffff>; - - gic: interrupt-controller@f9010000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - reg = <0x0 0xf9010000 0x10000>, - <0x0 0xf9020000 0x20000>, - <0x0 0xf9040000 0x20000>, - <0x0 0xf9060000 0x20000>; - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <1 9 0xf04>; - }; - }; - amba: axi { compatible = "simple-bus"; #address-cells = <2>; @@ -339,6 +345,18 @@ power-domains = <&zynqmp_firmware PD_GDMA>; }; + gic: interrupt-controller@f9010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + reg = <0x0 0xf9010000 0x0 0x10000>, + <0x0 0xf9020000 0x0 0x20000>, + <0x0 0xf9040000 0x0 0x20000>, + <0x0 0xf9060000 0x0 0x20000>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <1 9 0xf04>; + }; + /* LPDDMA default allows only secured access. inorder to enable * These dma channels, Users should ensure that these dma * Channels are allowed for non secure access. @@ -542,8 +560,8 @@ <0x0 0xfd480000 0x0 0x1000>, <0x80 0x00000000 0x0 0x1000000>; reg-names = "breg", "pcireg", "cfg"; - ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */ - 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ + ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */ + <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c8ca76751a34..838301650a79 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -32,6 +32,7 @@ CONFIG_ARCH_AGILEX=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_BCM2835=y +CONFIG_ARCH_BCM4908=y CONFIG_ARCH_BCM_IPROC=y CONFIG_ARCH_BERLIN=y CONFIG_ARCH_BRCMSTB=y diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c index 5304aea3b058..366870150cbd 100644 --- a/drivers/interconnect/qcom/sdm845.c +++ b/drivers/interconnect/qcom/sdm845.c @@ -177,6 +177,7 @@ DEFINE_QBCM(bcm_sn15, "SN15", false, &qnm_memnoc); static struct qcom_icc_bcm *aggre1_noc_bcms[] = { &bcm_sn9, + &bcm_qup0, }; static struct qcom_icc_node *aggre1_noc_nodes[] = { @@ -190,6 +191,7 @@ static struct qcom_icc_node *aggre1_noc_nodes[] = { [SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc, [SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc, [SLAVE_ANOC_PCIE_A1NOC_SNOC] = &qns_pcie_a1noc_snoc, + [MASTER_QUP_1] = &qhm_qup1, }; static const struct qcom_icc_desc sdm845_aggre1_noc = { @@ -218,6 +220,7 @@ static struct qcom_icc_node *aggre2_noc_nodes[] = { [SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc, [SLAVE_ANOC_PCIE_SNOC] = &qns_pcie_snoc, [SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc, + [MASTER_QUP_2] = &qhm_qup2, }; static const struct qcom_icc_desc sdm845_aggre2_noc = { diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h index fd1f938c38d1..e2749dbc74b8 100644 --- a/include/dt-bindings/clock/axg-clkc.h +++ b/include/dt-bindings/clock/axg-clkc.h @@ -72,5 +72,30 @@ #define CLKID_PCIE_CML_EN1 80 #define CLKID_MIPI_ENABLE 81 #define CLKID_GEN_CLK 84 +#define CLKID_VPU_0_SEL 92 +#define CLKID_VPU_0 93 +#define CLKID_VPU_1_SEL 95 +#define CLKID_VPU_1 96 +#define CLKID_VPU 97 +#define CLKID_VAPB_0_SEL 99 +#define CLKID_VAPB_0 100 +#define CLKID_VAPB_1_SEL 102 +#define CLKID_VAPB_1 103 +#define CLKID_VAPB_SEL 104 +#define CLKID_VAPB 105 +#define CLKID_VCLK 106 +#define CLKID_VCLK2 107 +#define CLKID_VCLK_DIV1 122 +#define CLKID_VCLK_DIV2 123 +#define CLKID_VCLK_DIV4 124 +#define CLKID_VCLK_DIV6 125 +#define CLKID_VCLK_DIV12 126 +#define CLKID_VCLK2_DIV1 127 +#define CLKID_VCLK2_DIV2 128 +#define CLKID_VCLK2_DIV4 129 +#define CLKID_VCLK2_DIV6 130 +#define CLKID_VCLK2_DIV12 131 +#define CLKID_CTS_ENCL 133 +#define CLKID_VDIN_MEAS 136 #endif /* __AXG_CLKC_H */ diff --git a/include/dt-bindings/clock/imx8-lpcg.h b/include/dt-bindings/clock/imx8-lpcg.h new file mode 100644 index 000000000000..d202715652c3 --- /dev/null +++ b/include/dt-bindings/clock/imx8-lpcg.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#define IMX_LPCG_CLK_0 0 +#define IMX_LPCG_CLK_1 4 +#define IMX_LPCG_CLK_2 8 +#define IMX_LPCG_CLK_3 12 +#define IMX_LPCG_CLK_4 16 +#define IMX_LPCG_CLK_5 20 +#define IMX_LPCG_CLK_6 24 +#define IMX_LPCG_CLK_7 28 diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h new file mode 100644 index 000000000000..2dd56683d3c1 --- /dev/null +++ b/include/dt-bindings/gpio/msc313-gpio.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * GPIO definitions for MStar/SigmaStar MSC313 and later SoCs + * + * Copyright (C) 2020 Daniel Palmer <daniel@thingy.jp> + */ + +#ifndef _DT_BINDINGS_MSC313_GPIO_H +#define _DT_BINDINGS_MSC313_GPIO_H + +#define MSC313_GPIO_FUART 0 +#define MSC313_GPIO_FUART_RX (MSC313_GPIO_FUART + 0) +#define MSC313_GPIO_FUART_TX (MSC313_GPIO_FUART + 1) +#define MSC313_GPIO_FUART_CTS (MSC313_GPIO_FUART + 2) +#define MSC313_GPIO_FUART_RTS (MSC313_GPIO_FUART + 3) + +#define MSC313_GPIO_SR (MSC313_GPIO_FUART_RTS + 1) +#define MSC313_GPIO_SR_IO2 (MSC313_GPIO_SR + 0) +#define MSC313_GPIO_SR_IO3 (MSC313_GPIO_SR + 1) +#define MSC313_GPIO_SR_IO4 (MSC313_GPIO_SR + 2) +#define MSC313_GPIO_SR_IO5 (MSC313_GPIO_SR + 3) +#define MSC313_GPIO_SR_IO6 (MSC313_GPIO_SR + 4) +#define MSC313_GPIO_SR_IO7 (MSC313_GPIO_SR + 5) +#define MSC313_GPIO_SR_IO8 (MSC313_GPIO_SR + 6) +#define MSC313_GPIO_SR_IO9 (MSC313_GPIO_SR + 7) +#define MSC313_GPIO_SR_IO10 (MSC313_GPIO_SR + 8) +#define MSC313_GPIO_SR_IO11 (MSC313_GPIO_SR + 9) +#define MSC313_GPIO_SR_IO12 (MSC313_GPIO_SR + 10) +#define MSC313_GPIO_SR_IO13 (MSC313_GPIO_SR + 11) +#define MSC313_GPIO_SR_IO14 (MSC313_GPIO_SR + 12) +#define MSC313_GPIO_SR_IO15 (MSC313_GPIO_SR + 13) +#define MSC313_GPIO_SR_IO16 (MSC313_GPIO_SR + 14) +#define MSC313_GPIO_SR_IO17 (MSC313_GPIO_SR + 15) + +#define MSC313_GPIO_SD (MSC313_GPIO_SR_IO17 + 1) +#define MSC313_GPIO_SD_CLK (MSC313_GPIO_SD + 0) +#define MSC313_GPIO_SD_CMD (MSC313_GPIO_SD + 1) +#define MSC313_GPIO_SD_D0 (MSC313_GPIO_SD + 2) +#define MSC313_GPIO_SD_D1 (MSC313_GPIO_SD + 3) +#define MSC313_GPIO_SD_D2 (MSC313_GPIO_SD + 4) +#define MSC313_GPIO_SD_D3 (MSC313_GPIO_SD + 5) + +#define MSC313_GPIO_I2C1 (MSC313_GPIO_SD_D3 + 1) +#define MSC313_GPIO_I2C1_SCL (MSC313_GPIO_I2C1 + 0) +#define MSC313_GPIO_I2C1_SDA (MSC313_GPIO_I2C1 + 1) + +#define MSC313_GPIO_SPI0 (MSC313_GPIO_I2C1_SDA + 1) +#define MSC313_GPIO_SPI0_CZ (MSC313_GPIO_SPI0 + 0) +#define MSC313_GPIO_SPI0_CK (MSC313_GPIO_SPI0 + 1) +#define MSC313_GPIO_SPI0_DI (MSC313_GPIO_SPI0 + 2) +#define MSC313_GPIO_SPI0_DO (MSC313_GPIO_SPI0 + 3) + +#endif /* _DT_BINDINGS_MSC313_GPIO_H */ diff --git a/include/dt-bindings/interconnect/qcom,sdm845.h b/include/dt-bindings/interconnect/qcom,sdm845.h index 290be38f40e6..67b500e24915 100644 --- a/include/dt-bindings/interconnect/qcom,sdm845.h +++ b/include/dt-bindings/interconnect/qcom,sdm845.h @@ -19,6 +19,7 @@ #define SLAVE_A1NOC_SNOC 7 #define SLAVE_SERVICE_A1NOC 8 #define SLAVE_ANOC_PCIE_A1NOC_SNOC 9 +#define MASTER_QUP_1 10 #define MASTER_A2NOC_CFG 0 #define MASTER_QDSS_BAM 1 @@ -32,6 +33,7 @@ #define SLAVE_A2NOC_SNOC 9 #define SLAVE_ANOC_PCIE_SNOC 10 #define SLAVE_SERVICE_A2NOC 11 +#define MASTER_QUP_2 12 #define MASTER_SPDM 0 #define MASTER_TIC 1 diff --git a/include/dt-bindings/memory/tegra124-mc.h b/include/dt-bindings/memory/tegra124-mc.h index 186e6b7e9b35..7e73bb400eca 100644 --- a/include/dt-bindings/memory/tegra124-mc.h +++ b/include/dt-bindings/memory/tegra124-mc.h @@ -54,4 +54,72 @@ #define TEGRA124_MC_RESET_ISP2B 22 #define TEGRA124_MC_RESET_GPU 23 +#define TEGRA124_MC_PTCR 0 +#define TEGRA124_MC_DISPLAY0A 1 +#define TEGRA124_MC_DISPLAY0AB 2 +#define TEGRA124_MC_DISPLAY0B 3 +#define TEGRA124_MC_DISPLAY0BB 4 +#define TEGRA124_MC_DISPLAY0C 5 +#define TEGRA124_MC_DISPLAY0CB 6 +#define TEGRA124_MC_AFIR 14 +#define TEGRA124_MC_AVPCARM7R 15 +#define TEGRA124_MC_DISPLAYHC 16 +#define TEGRA124_MC_DISPLAYHCB 17 +#define TEGRA124_MC_HDAR 21 +#define TEGRA124_MC_HOST1XDMAR 22 +#define TEGRA124_MC_HOST1XR 23 +#define TEGRA124_MC_MSENCSRD 28 +#define TEGRA124_MC_PPCSAHBDMAR 29 +#define TEGRA124_MC_PPCSAHBSLVR 30 +#define TEGRA124_MC_SATAR 31 +#define TEGRA124_MC_VDEBSEVR 34 +#define TEGRA124_MC_VDEMBER 35 +#define TEGRA124_MC_VDEMCER 36 +#define TEGRA124_MC_VDETPER 37 +#define TEGRA124_MC_MPCORELPR 38 +#define TEGRA124_MC_MPCORER 39 +#define TEGRA124_MC_MSENCSWR 43 +#define TEGRA124_MC_AFIW 49 +#define TEGRA124_MC_AVPCARM7W 50 +#define TEGRA124_MC_HDAW 53 +#define TEGRA124_MC_HOST1XW 54 +#define TEGRA124_MC_MPCORELPW 56 +#define TEGRA124_MC_MPCOREW 57 +#define TEGRA124_MC_PPCSAHBDMAW 59 +#define TEGRA124_MC_PPCSAHBSLVW 60 +#define TEGRA124_MC_SATAW 61 +#define TEGRA124_MC_VDEBSEVW 62 +#define TEGRA124_MC_VDEDBGW 63 +#define TEGRA124_MC_VDEMBEW 64 +#define TEGRA124_MC_VDETPMW 65 +#define TEGRA124_MC_ISPRA 68 +#define TEGRA124_MC_ISPWA 70 +#define TEGRA124_MC_ISPWB 71 +#define TEGRA124_MC_XUSB_HOSTR 74 +#define TEGRA124_MC_XUSB_HOSTW 75 +#define TEGRA124_MC_XUSB_DEVR 76 +#define TEGRA124_MC_XUSB_DEVW 77 +#define TEGRA124_MC_ISPRAB 78 +#define TEGRA124_MC_ISPWAB 80 +#define TEGRA124_MC_ISPWBB 81 +#define TEGRA124_MC_TSECSRD 84 +#define TEGRA124_MC_TSECSWR 85 +#define TEGRA124_MC_A9AVPSCR 86 +#define TEGRA124_MC_A9AVPSCW 87 +#define TEGRA124_MC_GPUSRD 88 +#define TEGRA124_MC_GPUSWR 89 +#define TEGRA124_MC_DISPLAYT 90 +#define TEGRA124_MC_SDMMCRA 96 +#define TEGRA124_MC_SDMMCRAA 97 +#define TEGRA124_MC_SDMMCR 98 +#define TEGRA124_MC_SDMMCRAB 99 +#define TEGRA124_MC_SDMMCWA 100 +#define TEGRA124_MC_SDMMCWAA 101 +#define TEGRA124_MC_SDMMCW 102 +#define TEGRA124_MC_SDMMCWAB 103 +#define TEGRA124_MC_VICSRD 108 +#define TEGRA124_MC_VICSWR 109 +#define TEGRA124_MC_VIW 114 +#define TEGRA124_MC_DISPLAYD 115 + #endif diff --git a/include/dt-bindings/memory/tegra20-mc.h b/include/dt-bindings/memory/tegra20-mc.h index 35e131eee198..6f8829508ad0 100644 --- a/include/dt-bindings/memory/tegra20-mc.h +++ b/include/dt-bindings/memory/tegra20-mc.h @@ -18,4 +18,57 @@ #define TEGRA20_MC_RESET_VDE 13 #define TEGRA20_MC_RESET_VI 14 +#define TEGRA20_MC_DISPLAY0A 0 +#define TEGRA20_MC_DISPLAY0AB 1 +#define TEGRA20_MC_DISPLAY0B 2 +#define TEGRA20_MC_DISPLAY0BB 3 +#define TEGRA20_MC_DISPLAY0C 4 +#define TEGRA20_MC_DISPLAY0CB 5 +#define TEGRA20_MC_DISPLAY1B 6 +#define TEGRA20_MC_DISPLAY1BB 7 +#define TEGRA20_MC_EPPUP 8 +#define TEGRA20_MC_G2PR 9 +#define TEGRA20_MC_G2SR 10 +#define TEGRA20_MC_MPEUNIFBR 11 +#define TEGRA20_MC_VIRUV 12 +#define TEGRA20_MC_AVPCARM7R 13 +#define TEGRA20_MC_DISPLAYHC 14 +#define TEGRA20_MC_DISPLAYHCB 15 +#define TEGRA20_MC_FDCDRD 16 +#define TEGRA20_MC_G2DR 17 +#define TEGRA20_MC_HOST1XDMAR 18 +#define TEGRA20_MC_HOST1XR 19 +#define TEGRA20_MC_IDXSRD 20 +#define TEGRA20_MC_MPCORER 21 +#define TEGRA20_MC_MPE_IPRED 22 +#define TEGRA20_MC_MPEAMEMRD 23 +#define TEGRA20_MC_MPECSRD 24 +#define TEGRA20_MC_PPCSAHBDMAR 25 +#define TEGRA20_MC_PPCSAHBSLVR 26 +#define TEGRA20_MC_TEXSRD 27 +#define TEGRA20_MC_VDEBSEVR 28 +#define TEGRA20_MC_VDEMBER 29 +#define TEGRA20_MC_VDEMCER 30 +#define TEGRA20_MC_VDETPER 31 +#define TEGRA20_MC_EPPU 32 +#define TEGRA20_MC_EPPV 33 +#define TEGRA20_MC_EPPY 34 +#define TEGRA20_MC_MPEUNIFBW 35 +#define TEGRA20_MC_VIWSB 36 +#define TEGRA20_MC_VIWU 37 +#define TEGRA20_MC_VIWV 38 +#define TEGRA20_MC_VIWY 39 +#define TEGRA20_MC_G2DW 40 +#define TEGRA20_MC_AVPCARM7W 41 +#define TEGRA20_MC_FDCDWR 42 +#define TEGRA20_MC_HOST1XW 43 +#define TEGRA20_MC_ISPW 44 +#define TEGRA20_MC_MPCOREW 45 +#define TEGRA20_MC_MPECSWR 46 +#define TEGRA20_MC_PPCSAHBDMAW 47 +#define TEGRA20_MC_PPCSAHBSLVW 48 +#define TEGRA20_MC_VDEBSEVW 49 +#define TEGRA20_MC_VDEMBEW 50 +#define TEGRA20_MC_VDETPMW 51 + #endif diff --git a/include/dt-bindings/memory/tegra30-mc.h b/include/dt-bindings/memory/tegra30-mc.h index 169f005fbc78..930f708aca17 100644 --- a/include/dt-bindings/memory/tegra30-mc.h +++ b/include/dt-bindings/memory/tegra30-mc.h @@ -41,4 +41,71 @@ #define TEGRA30_MC_RESET_VDE 16 #define TEGRA30_MC_RESET_VI 17 +#define TEGRA30_MC_PTCR 0 +#define TEGRA30_MC_DISPLAY0A 1 +#define TEGRA30_MC_DISPLAY0AB 2 +#define TEGRA30_MC_DISPLAY0B 3 +#define TEGRA30_MC_DISPLAY0BB 4 +#define TEGRA30_MC_DISPLAY0C 5 +#define TEGRA30_MC_DISPLAY0CB 6 +#define TEGRA30_MC_DISPLAY1B 7 +#define TEGRA30_MC_DISPLAY1BB 8 +#define TEGRA30_MC_EPPUP 9 +#define TEGRA30_MC_G2PR 10 +#define TEGRA30_MC_G2SR 11 +#define TEGRA30_MC_MPEUNIFBR 12 +#define TEGRA30_MC_VIRUV 13 +#define TEGRA30_MC_AFIR 14 +#define TEGRA30_MC_AVPCARM7R 15 +#define TEGRA30_MC_DISPLAYHC 16 +#define TEGRA30_MC_DISPLAYHCB 17 +#define TEGRA30_MC_FDCDRD 18 +#define TEGRA30_MC_FDCDRD2 19 +#define TEGRA30_MC_G2DR 20 +#define TEGRA30_MC_HDAR 21 +#define TEGRA30_MC_HOST1XDMAR 22 +#define TEGRA30_MC_HOST1XR 23 +#define TEGRA30_MC_IDXSRD 24 +#define TEGRA30_MC_IDXSRD2 25 +#define TEGRA30_MC_MPE_IPRED 26 +#define TEGRA30_MC_MPEAMEMRD 27 +#define TEGRA30_MC_MPECSRD 28 +#define TEGRA30_MC_PPCSAHBDMAR 29 +#define TEGRA30_MC_PPCSAHBSLVR 30 +#define TEGRA30_MC_SATAR 31 +#define TEGRA30_MC_TEXSRD 32 +#define TEGRA30_MC_TEXSRD2 33 +#define TEGRA30_MC_VDEBSEVR 34 +#define TEGRA30_MC_VDEMBER 35 +#define TEGRA30_MC_VDEMCER 36 +#define TEGRA30_MC_VDETPER 37 +#define TEGRA30_MC_MPCORELPR 38 +#define TEGRA30_MC_MPCORER 39 +#define TEGRA30_MC_EPPU 40 +#define TEGRA30_MC_EPPV 41 +#define TEGRA30_MC_EPPY 42 +#define TEGRA30_MC_MPEUNIFBW 43 +#define TEGRA30_MC_VIWSB 44 +#define TEGRA30_MC_VIWU 45 +#define TEGRA30_MC_VIWV 46 +#define TEGRA30_MC_VIWY 47 +#define TEGRA30_MC_G2DW 48 +#define TEGRA30_MC_AFIW 49 +#define TEGRA30_MC_AVPCARM7W 50 +#define TEGRA30_MC_FDCDWR 51 +#define TEGRA30_MC_FDCDWR2 52 +#define TEGRA30_MC_HDAW 53 +#define TEGRA30_MC_HOST1XW 54 +#define TEGRA30_MC_ISPW 55 +#define TEGRA30_MC_MPCORELPW 56 +#define TEGRA30_MC_MPCOREW 57 +#define TEGRA30_MC_MPECSWR 58 +#define TEGRA30_MC_PPCSAHBDMAW 59 +#define TEGRA30_MC_PPCSAHBSLVW 60 +#define TEGRA30_MC_SATAW 61 +#define TEGRA30_MC_VDEBSEVW 62 +#define TEGRA30_MC_VDEDBGW 63 +#define TEGRA30_MC_VDEMBEW 64 +#define TEGRA30_MC_VDETPMW 65 + #endif diff --git a/include/dt-bindings/power/mt8183-power.h b/include/dt-bindings/power/mt8183-power.h new file mode 100644 index 000000000000..d1ab387ba8c7 --- /dev/null +++ b/include/dt-bindings/power/mt8183-power.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 MediaTek Inc. + * Author: Weiyi Lu <weiyi.lu@mediatek.com> + */ + +#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H +#define _DT_BINDINGS_POWER_MT8183_POWER_H + +#define MT8183_POWER_DOMAIN_AUDIO 0 +#define MT8183_POWER_DOMAIN_CONN 1 +#define MT8183_POWER_DOMAIN_MFG_ASYNC 2 +#define MT8183_POWER_DOMAIN_MFG 3 +#define MT8183_POWER_DOMAIN_MFG_CORE0 4 +#define MT8183_POWER_DOMAIN_MFG_CORE1 5 +#define MT8183_POWER_DOMAIN_MFG_2D 6 +#define MT8183_POWER_DOMAIN_DISP 7 +#define MT8183_POWER_DOMAIN_CAM 8 +#define MT8183_POWER_DOMAIN_ISP 9 +#define MT8183_POWER_DOMAIN_VDEC 10 +#define MT8183_POWER_DOMAIN_VENC 11 +#define MT8183_POWER_DOMAIN_VPU_TOP 12 +#define MT8183_POWER_DOMAIN_VPU_CORE0 13 +#define MT8183_POWER_DOMAIN_VPU_CORE1 14 + +#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */ diff --git a/include/dt-bindings/power/mt8192-power.h b/include/dt-bindings/power/mt8192-power.h new file mode 100644 index 000000000000..4eaa53d7270a --- /dev/null +++ b/include/dt-bindings/power/mt8192-power.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (c) 2020 MediaTek Inc. + * Author: Weiyi Lu <weiyi.lu@mediatek.com> + */ + +#ifndef _DT_BINDINGS_POWER_MT8192_POWER_H +#define _DT_BINDINGS_POWER_MT8192_POWER_H + +#define MT8192_POWER_DOMAIN_AUDIO 0 +#define MT8192_POWER_DOMAIN_CONN 1 +#define MT8192_POWER_DOMAIN_MFG0 2 +#define MT8192_POWER_DOMAIN_MFG1 3 +#define MT8192_POWER_DOMAIN_MFG2 4 +#define MT8192_POWER_DOMAIN_MFG3 5 +#define MT8192_POWER_DOMAIN_MFG4 6 +#define MT8192_POWER_DOMAIN_MFG5 7 +#define MT8192_POWER_DOMAIN_MFG6 8 +#define MT8192_POWER_DOMAIN_DISP 9 +#define MT8192_POWER_DOMAIN_IPE 10 +#define MT8192_POWER_DOMAIN_ISP 11 +#define MT8192_POWER_DOMAIN_ISP2 12 +#define MT8192_POWER_DOMAIN_MDP 13 +#define MT8192_POWER_DOMAIN_VENC 14 +#define MT8192_POWER_DOMAIN_VDEC 15 +#define MT8192_POWER_DOMAIN_VDEC2 16 +#define MT8192_POWER_DOMAIN_CAM 17 +#define MT8192_POWER_DOMAIN_CAM_RAWA 18 +#define MT8192_POWER_DOMAIN_CAM_RAWB 19 +#define MT8192_POWER_DOMAIN_CAM_RAWC 20 + +#endif /* _DT_BINDINGS_POWER_MT8192_POWER_H */ |