diff options
| author |   Matthew Vick <matthew.vick@intel.com> | 2012-10-16 07:44:45 +0000 |
|---|---|---|
| committer |   Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2012-10-29 23:49:11 -0700 |
| commit | 9f0b8516198e8b0919774a1874fab064a2ea3ae8 (patch) | |
| tree | 60a59c1c1e6bcb9d6fa6d279bf2e3422e84aea2e | |
| parent | igbvf: Check for error on dma_map_single call (diff) | |
| download | linux-dev-9f0b8516198e8b0919774a1874fab064a2ea3ae8.tar.xz linux-dev-9f0b8516198e8b0919774a1874fab064a2ea3ae8.zip | |
igb: Enable auto-crossover during forced operation on 82580 and above.
Newer devices supported by igb can support auto-crossover detection in
forced operation modes. Enable this in the driver, rather than clobbering
this functionality in forced operation.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_mac.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.c | 29 |
2 files changed, 21 insertions, 12 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 819c145ac762..7acddfe9e6d5 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -1391,6 +1391,10 @@ s32 igb_validate_mdi_setting(struct e1000_hw *hw) { s32 ret_val = 0; + /* All MDI settings are supported on 82580 and newer. */ + if (hw->mac.type >= e1000_82580) + goto out; + if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { hw_dbg("Invalid MDI setting detected\n"); hw->phy.mdix = 1; diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index c62a4c388194..fe76004aca4e 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1207,20 +1207,25 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) u16 phy_data; bool link; - /* - * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed and duplex are forced. - */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - goto out; + /* I210 and I211 devices support Auto-Crossover in forced operation. */ + if (phy->type != e1000_phy_i210) { + /* + * Clear Auto-Crossover to force MDI manually. M88E1000 + * requires MDI forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + goto out; - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - goto out; + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + goto out; - hw_dbg("M88E1000 PSCR: %X\n", phy_data); + hw_dbg("M88E1000 PSCR: %X\n", phy_data); + } ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) |