Merge tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/soc

This is a slew of Ux500 updates for the v5.4 kernel cycle:

- Stop populating the PRCMU devices from the core CPU
  file, it works just fine at device_initcall() level.

- Add a missing of_node_put() in the core file.

- Simplify the debug UART code.

- Add myself to MAINTAINERS

* tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  MAINTAINERS: add soc/ux500
  ARM: ux500: simplify and move debug UART
  ARM: ux500: add missing of_node_put()
  ARM: ux500: Stop populating the PRCMU devices early

Link: https://lore.kernel.org/r/CACRpkdbH-h5fRwuidcpeOp8mtRoKUW65SAk8a4A==BCDzn3QMA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 7 insertions, 9 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index a1ebe7956912..d37b752898a5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1953,6 +1953,7 @@ F:	Documentation/devicetree/bindings/i2c/i2c-stu300.txt
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/mach-u300/
 F:	arch/arm/mach-ux500/
+F:	drivers/soc/ux500/
 F:	arch/arm/boot/dts/ste-*
 F:	drivers/clk/clk-nomadik.c
 F:	drivers/clk/clk-u300.c
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index c626f89b3e4a..c516900947bb 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -20,21 +20,16 @@
 #define U8500_UART0_PHYS_BASE	(0x80120000)
 #define U8500_UART1_PHYS_BASE	(0x80121000)
 #define U8500_UART2_PHYS_BASE	(0x80007000)
-#define U8500_UART0_VIRT_BASE	(0xf8120000)
-#define U8500_UART1_VIRT_BASE	(0xf8121000)
-#define U8500_UART2_VIRT_BASE	(0xf8007000)
 #define __UX500_PHYS_UART(n)	U8500_UART##n##_PHYS_BASE
-#define __UX500_VIRT_UART(n)	U8500_UART##n##_VIRT_BASE
 #endif
 
-#if !defined(__UX500_PHYS_UART) || !defined(__UX500_VIRT_UART)
+#if !defined(__UX500_PHYS_UART)
 #error Unknown SOC
 #endif
 
 #define UX500_PHYS_UART(n)	__UX500_PHYS_UART(n)
-#define UX500_VIRT_UART(n)	__UX500_VIRT_UART(n)
 #define UART_PHYS_BASE	UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART)
-#define UART_VIRT_BASE	UX500_VIRT_UART(CONFIG_UX500_DEBUG_UART)
+#define UART_VIRT_BASE	(0xfff07000)
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =UART_PHYS_BASE		@ no, physical address
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9580525102da..3875027ef8fc 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -110,7 +110,6 @@ static void ux500_restart(enum reboot_mode mode, const char *cmd)
 static const struct of_device_id u8500_local_bus_nodes[] = {
 	/* only create devices below soc node */
 	{ .compatible = "stericsson,db8500", },
-	{ .compatible = "stericsson,db8500-prcmu", },
 	{ .compatible = "simple-bus"},
 	{ },
 };
diff --git a/drivers/soc/ux500/ux500-soc-id.c b/drivers/soc/ux500/ux500-soc-id.c
index ea5fd2e5e340..d64feeb51a40 100644
--- a/drivers/soc/ux500/ux500-soc-id.c
+++ b/drivers/soc/ux500/ux500-soc-id.c
@@ -203,10 +203,13 @@ static int __init ux500_soc_device_init(void)
 	ux500_setup_id();
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
+	if (!soc_dev_attr) {
+		of_node_put(backupram);
 		return -ENOMEM;
+	}
 
 	soc_info_populate(soc_dev_attr, backupram);
+	of_node_put(backupram);
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {