diff options
| author |   Adam Sampson <ats@offog.org> | 2020-11-23 17:47:39 +0000 |
|---|---|---|
| committer |   Maxime Ripard <maxime@cerno.tech> | 2020-11-24 15:24:28 +0100 |
| commit | a7361b9c4615951f52ffd2b1afa09a1384c7b4e4 (patch) | |
| tree | 2496cb1a65ef28608a680180f6f56b8fd0db70cc | |
| parent | ARM: dts: sun8i: v3s: fix GIC node memory range (diff) | |
| download | linux-dev-a7361b9c4615951f52ffd2b1afa09a1384c7b4e4.tar.xz linux-dev-a7361b9c4615951f52ffd2b1afa09a1384c7b4e4.zip | |
ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY
The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano
are configured in hardware, using resistors that are populated to pull
the RTL8211E's RXDLY/TXDLY pins low or high as needed.
phy-mode should be set to rgmii-id to reflect this. Previously it was
set to rgmii, which used to work but now results in the delays being
disabled again as a result of the bugfix in commit bbc4d71d6354 ("net:
phy: realtek: fix rtl8211e rx/tx delay config").
Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix,
Ethernet works unreliably on one board and doesn't work at all on the
other.
Fixes: 061035d456c9 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board")
Signed-off-by: Adam Sampson <ats@offog.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201123174739.6809-1-ats@offog.org
| -rw-r--r-- | arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index fce2f7fcd084..bf38c66c1815 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015 Adam Sampson <ats@offog.org> + * Copyright 2015-2020 Adam Sampson <ats@offog.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -115,7 +115,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; |