ARM: mxs: remove board files

Since DT kernel provides the equivalent support with those board
files, we can remove them now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>

11 files changed, 0 insertions, 1883 deletions

diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 4edcfb4e4dee..36d60dda310c 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
 CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 9a8bbda195b2..2e6cb6d8604f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -27,91 +27,4 @@ config MACH_MXS_DT
 	  Include support for Freescale MXS platforms(i.MX23 and i.MX28)
 	  using the device tree for discovery
 
-config MACH_STMP378X_DEVB
-	bool "Support STMP378x_devb Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for STMP378x-devb platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX23EVK
-	bool "Support MX23EVK Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX23EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX28EVK
-	bool "Support MX28EVK Platform"
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX28EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MODULE_TX28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_PWM
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-
-config MODULE_APX4
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-
-config MACH_TX28
-	bool "Ka-Ro TX28 module"
-	select MODULE_TX28
-
-config MACH_M28EVK
-	bool "Support DENX M28EVK Platform"
-	select MODULE_M28
-
-config MACH_APX4DEVKIT
-	bool "Support Bluegiga APX4 Development Kit"
-	select MODULE_APX4
-
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index fed3695a1339..a7ace243cfcc 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -4,12 +4,5 @@ obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
 obj-$(CONFIG_PM) += pm.o
 
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 
 obj-y += devices/
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
deleted file mode 100644
index f5f061757deb..000000000000
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED	MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
-	/* auart1 */
-	MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
-	/* auart2 */
-	MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
-	/* i2c */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
-	{
-		.name = "user-led",
-		.default_trigger = "heartbeat",
-		.gpio = APX4DEVKIT_GPIO_USERLED,
-	},
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
-	.leds = apx4devkit_leds,
-	.num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
-	.wp_gpio = -EINVAL,
-	.flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
-	{ I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
-	{ I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
-		defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = apx4devkit_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &apx4devkit_vdd_pdata,
-	},
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
-	platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
-			apx4devkit_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
-	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
-	return 0;
-}
-
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
-static void __init apx4devkit_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
-			ARRAY_SIZE(apx4devkit_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart1();
-	mx28_add_auart2();
-	mx28_add_auart3();
-
-	/*
-	 * Register fixup for the Micrel KS8031 PHY clock
-	 * (shares same ID with KS8051)
-	 */
-	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
-			apx4devkit_phy_fixup);
-
-	apx4devkit_fec_phy_clk_enable();
-	mx28_add_fec(0, &mx28_fec_pdata);
-
-	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
-	gpio_led_register_device(0, &apx4devkit_led_data);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
-	apx4devkit_add_regulators();
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
-			ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
-	.init	= apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &apx4devkit_timer,
-	.init_machine	= apx4devkit_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
deleted file mode 100644
index 4c00c879b893..000000000000
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
-	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
-	/* nand */
-	MX28_PAD_GPMI_D00__GPMI_D0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D01__GPMI_D1 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D02__GPMI_D2 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D03__GPMI_D3 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D04__GPMI_D4 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D05__GPMI_D5 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D06__GPMI_D6 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D07__GPMI_D7 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_ALE__GPMI_ALE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_CLE__GPMI_CLE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
-	/* Backlight */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
-	{
-		.name = "user-led1",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED1,
-	},
-	{
-		.name = "user-led2",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED2,
-	},
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
-	.leds = m28evk_leds,
-	.num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code DENX OUI (C0:E5:4E) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0xC0;
-		mx28_fec_pdata[i].mac[1] = 0xE5;
-		mx28_fec_pdata[i].mac[2] = 0x4E;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
-	{
-		.name		= "Ampire AM-800480R2TMQW-T01H",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 30066, /* picosecond (33.26 MHz) */
-		.left_margin	= 0,
-		.right_margin	= 256,
-		.upper_margin	= 0,
-		.lower_margin	= 45,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
-	.mode_list	= m28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
-	.default_bpp	= 16,
-	.ld_intf_width	= STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
-	.byte_len = 16384,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
-		.platform_data = &m28evk_eeprom,
-	},
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static void __init m28evk_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (!m28evk_fec_get_mac()) {
-		mx28_add_fec(0, &mx28_fec_pdata[0]);
-		mx28_add_fec(1, &mx28_fec_pdata[1]);
-	}
-
-	mx28_add_flexcan(0, NULL);
-	mx28_add_flexcan(1, NULL);
-
-	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
-	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
-	gpio_led_register_device(0, &m28evk_led_data);
-
-	/* I2C */
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
-	.init	= m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &m28evk_timer,
-	.init_machine	= m28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
deleted file mode 100644
index e7272a41939d..000000000000
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
-	/* duart */
-	MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
-	/* mxsfb (lcdif) */
-	MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
-	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D08__SSP1_DATA4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D09__SSP1_DATA5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D10__SSP1_DATA6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D11__SSP1_DATA7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX23_PAD_PWM4__GPIO_1_30 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX23_PAD_PWM3__GPIO_1_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
-	{
-		.name		= "Samsung-LMS430HF02",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 272,
-		.pixclock	= 108096, /* picosecond (9.2 MHz) */
-		.left_margin	= 15,
-		.right_margin	= 8,
-		.upper_margin	= 12,
-		.lower_margin	= 4,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx23evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx23evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
-	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
-	.flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-
-	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-			       "mmc0-slot-power");
-	if (ret)
-		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
-	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
-	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
-	mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
-	.init	= mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &mx23evk_timer,
-	.init_machine	= mx23evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
deleted file mode 100644
index dafd48e86c8c..000000000000
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED	MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-	/* phy power line */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
-	/* phy reset line */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-	/* transceiver power control */
-	MX28_PAD_SSP1_CMD__GPIO_2_13,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
-	MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_SSP1_SCK__GPIO_2_12 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM3__GPIO_3_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_I2C0_SDA__I2C0_SDA |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = MX28EVK_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
-	.leds = mx28evk_leds,
-	.num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
-	mdelay(1);
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code Freescale OUI (00:04:9f) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0x00;
-		mx28_fec_pdata[i].mac[1] = 0x04;
-		mx28_fec_pdata[i].mac[2] = 0x9f;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
-	if (flexcan0_en || flexcan1_en)
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-	else
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
-	flexcan0_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
-	flexcan1_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
-		mx28evk_flexcan_pdata[] __initconst = {
-	{
-		.transceiver_switch = mx28evk_flexcan0_switch,
-	}, {
-		.transceiver_switch = mx28evk_flexcan1_switch,
-	}
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
-	{
-		.name		= "Seiko-43WVF1G",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 29851, /* picosecond (33.5 MHz) */
-		.left_margin	= 89,
-		.right_margin	= 164,
-		.upper_margin	= 23,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx28evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("sgtl5000", 0x0a),
-	},
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = mx28evk_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mx28evk_vdd_pdata,
-	},
-};
-static void __init mx28evk_add_regulators(void)
-{
-	platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
-	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
-	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
-	{ MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
-	{ MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
-	{ MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
-	{ MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
-			mx28evk_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static void __init mx28evk_init(void)
-{
-	int ret;
-
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (mx28evk_fec_get_mac())
-		pr_warn("%s: failed on fec mac setup\n", __func__);
-
-	ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
-	if (ret)
-		pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
-	mx28evk_fec_reset();
-	mx28_add_fec(0, &mx28_fec_pdata[0]);
-	mx28_add_fec(1, &mx28_fec_pdata[1]);
-
-	mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-	mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, mxs_i2c0_board_info,
-				ARRAY_SIZE(mxs_i2c0_board_info));
-
-	mx28evk_add_regulators();
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
-			NULL, 0);
-
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
-	mx28_add_rtc_stmp3xxx();
-
-	gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
-	.init	= mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &mx28evk_timer,
-	.init_machine	= mx28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index 6548965e4a76..000000000000
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-	/* duart (extended setup missing in old boardcode, too */
-	MX23_PAD_PWM0__DUART_RX,
-	MX23_PAD_PWM1__DUART_TX,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-	MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-	.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-	{
-		.modalias       = "enc28j60",
-		.max_speed_hz   = 6 * 1000 * 1000,
-		.bus_num	= 1,
-		.chip_select    = 0,
-		.platform_data  = NULL,
-	},
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-			ARRAY_SIZE(stmp378x_dvb_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-	mx23_add_rtc_stmp3xxx();
-
-	/* power on mmc slot */
-	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-		GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-	if (ret)
-		pr_warn("could not power mmc (%d)\n", ret);
-
-	mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
-	.init	= stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &stmp378x_dvb_timer,
-	.init_machine	= stmp378x_dvb_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
deleted file mode 100644
index 8837029de1a4..000000000000
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED		MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
-	/* LED */
-	MX28_PAD_ENET0_RXD3__GPIO_4_10 |
-		MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
-	/* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
-	MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
-	MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
-	MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
-	MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
-	MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
-	MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
-	MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
-	MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
-	MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
-	MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
-	MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
-	MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
-	MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
-	MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
-	MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
-	MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
-	MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
-	MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
-	MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
-	MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
-	MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
-	MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
-	MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
-	MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
-	MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
-	MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
-	MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
-	/* UART1 */
-	MX28_PAD_AUART0_CTS__DUART_RX,
-	MX28_PAD_AUART0_RTS__DUART_TX,
-	MX28_PAD_AUART0_TX__DUART_RTS,
-	MX28_PAD_AUART0_RX__DUART_CTS,
-
-	/* UART2 */
-	MX28_PAD_AUART1_RX__AUART1_RX,
-	MX28_PAD_AUART1_TX__AUART1_TX,
-	MX28_PAD_AUART1_RTS__AUART1_RTS,
-	MX28_PAD_AUART1_CTS__AUART1_CTS,
-
-	/* CAN */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* TSC2007 */
-	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = TX28_STK5_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
-	.leds = tx28_stk5v3_leds,
-	.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
-       .wp_gpio = -EINVAL,
-       .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
-			ARRAY_SIZE(tx28_stk5v3_pads));
-
-	mx28_add_duart(); /* UART1 */
-	mx28_add_auart(1); /* UART2 */
-
-	tx28_add_fec0();
-	/* spi via ssp will be added when available */
-	spi_register_board_info(tx28_spi_board_info,
-			ARRAY_SIZE(tx28_spi_board_info));
-	gpio_led_register_device(0, &tx28_stk5v3_led_data);
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
-	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
-	mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
-	.init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
-	.map_io = mx28_map_io,
-	.init_irq = mx28_init_irq,
-	.timer = &tx28_timer,
-	.init_machine = tx28_stk5v3_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
deleted file mode 100644
index 0f71f82101cc..000000000000
--- a/arch/arm/mach-mxs/module-tx28.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
-	/* PHY POWER */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* PHY RESET */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* Mode strap pins 0-2 */
-	MX28_PAD_ENET0_RXD0__GPIO_4_3 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RXD1__GPIO_4_4 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	/* nINT */
-	MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
-	MX28_PAD_ENET0_MDC__GPIO_4_0,
-	MX28_PAD_ENET0_MDIO__GPIO_4_1,
-	MX28_PAD_ENET0_TX_EN__GPIO_4_6,
-	MX28_PAD_ENET0_TXD0__GPIO_4_7,
-	MX28_PAD_ENET0_TXD1__GPIO_4_8,
-	MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
-	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
-	int i, ret;
-
-	pr_debug("%s: Switching FEC PHY power off\n", __func__);
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
-			ARRAY_SIZE(tx28_fec_gpio_pads));
-	for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		ret = gpio_request(gpio, "FEC");
-		if (ret) {
-			pr_err("Failed to request GPIO_%d_%d: %d\n",
-				PAD_BANK(tx28_fec_gpio_pads[i]),
-				PAD_PIN(tx28_fec_gpio_pads[i]), ret);
-			goto free_gpios;
-		}
-		ret = gpio_direction_output(gpio, 0);
-		if (ret) {
-			pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
-					gpio / 32 + 1, gpio % 32, ret);
-			goto free_gpios;
-		}
-	}
-
-	/* Power up fec phy */
-	pr_debug("%s: Switching FEC PHY power on\n", __func__);
-	ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
-	if (ret) {
-		pr_err("Failed to power on PHY: %d\n", ret);
-		goto free_gpios;
-	}
-	mdelay(26); /* 25ms according to data sheet */
-
-	/* nINT */
-	gpio_direction_input(MXS_GPIO_NR(4, 5));
-	/* Mode strap pins */
-	gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
-			ARRAY_SIZE(tx28_fec0_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		goto free_gpios;
-	}
-	pr_debug("%s: Registering FEC0 device\n", __func__);
-	mx28_add_fec(0, &tx28_fec0_data);
-	return 0;
-
-free_gpios:
-	while (--i >= 0) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
-	int ret;
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
-			ARRAY_SIZE(tx28_fec1_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		return ret;
-	}
-	pr_debug("%s: Registering FEC1 device\n", __func__);
-	mx28_add_fec(1, &tx28_fec1_data);
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
deleted file mode 100644
index 8ed425457d30..000000000000
--- a/arch/arm/mach-mxs/module-tx28.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);