diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-04 09:09:37 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-04 09:09:37 -0700 |
| commit | abfecb39092029c42c79bacac3d1c96a133ff231 (patch) | |
| tree | cea82a61f7b2f850071311dab0695f49dddca166 | |
| parent | Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core (diff) | |
| parent | tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description (diff) | |
| download | linux-dev-abfecb39092029c42c79bacac3d1c96a133ff231.tar.xz linux-dev-abfecb39092029c42c79bacac3d1c96a133ff231.zip | |
Merge tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
tty: rpmsg: Define tty name via constant string literal
tty: rpmsg: Add pr_fmt() to prefix messages
tty: rpmsg: Use dev_err_probe() in ->probe()
tty: rpmsg: Unify variable used to keep an error code
tty: rpmsg: Assign returned id to a local variable
serial: stm32: push DMA RX data before suspending
serial: stm32: terminate / restart DMA transfer at suspend / resume
serial: stm32: rework RX dma initialization and release
serial: 8250_pci: Remove empty stub pci_quatech_exit()
serial: 8250_pci: Replace custom pci_match_id() implementation
serial: xilinx_uartps: Fix race condition causing stuck TX
serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
Revert "tty: hvc: pass DMA capable memory to put_chars()"
Revert "virtio-console: remove unnecessary kmemdup()"
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250_pci: Get rid of redundant 'else' keyword
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
tty: add rpmsg driver
...
66 files changed, 1667 insertions, 860 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index 70ca61688bb9..7b34ec8fa90e 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -86,7 +86,7 @@ required: - reg - interrupts -additionalProperties: false +unevaluatedProperties: false if: properties: diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt deleted file mode 100644 index 8b2b0460259a..000000000000 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ /dev/null @@ -1,36 +0,0 @@ -* BCM63xx UART - -Required properties: - -- compatible: "brcm,bcm6345-uart" - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- clocks: Clock driving the hardware; used to figure out the baud rate - divisor. - - -Optional properties: - -- clock-names: Should be "refclk". - -Example: - - uart0: serial@14e00520 { - compatible = "brcm,bcm6345-uart"; - reg = <0x14e00520 0x18>; - interrupt-parent = <&periph_intc>; - interrupts = <2>; - clocks = <&periph_clk>; - clock-names = "refclk"; - }; - - clocks { - periph_clk: periph_clk@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <54000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml new file mode 100644 index 000000000000..a22285c43f80 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM63xx UART + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: brcm,bcm6345-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: refclk + +unevaluatedProperties: false + +required: + - reg + - interrupts + - clocks + +examples: + - | + serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + clock-names = "refclk"; + }; diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index f064e5b76cf1..2940afb874b3 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -26,6 +26,7 @@ properties: - samsung,s3c6400-uart - samsung,s5pv210-uart - samsung,exynos4210-uart + - samsung,exynos850-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index 09f6283f3cae..a444bebd2c1a 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -19,6 +19,7 @@ properties: - enum: - sprd,sc9860-uart - sprd,sc9863a-uart + - sprd,ums512-uart - const: sprd,sc9836-uart - const: sprd,sc9836-uart diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt deleted file mode 100644 index c37deb44dead..000000000000 --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt +++ /dev/null @@ -1,23 +0,0 @@ -Xilinx Axi Uartlite controller Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Can be either of - "xlnx,xps-uartlite-1.00.a" - "xlnx,opb-uartlite-1.00.b" -- reg : Physical base address and size of the Axi Uartlite - registers map. -- interrupts : Should contain the UART controller interrupt. - -Optional properties: -- port-number : Set Uart port number -- clock-names : Should be "s_axi_aclk" -- clocks : Input clock specifier. Refer to common clock bindings. - -Example: -serial@800c0000 { - compatible = "xlnx,xps-uartlite-1.00.a"; - reg = <0x0 0x800c0000 0x10000>; - interrupts = <0x0 0x6e 0x1>; - port-number = <0>; -}; diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml new file mode 100644 index 000000000000..f7617b88c7c3 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Axi Uartlite + +maintainers: + - Peter Korsgaard <jacmet@sunsite.dk> + +properties: + compatible: + contains: + enum: + - xlnx,xps-uartlite-1.00.a + - xlnx,opb-uartlite-1.00.b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + port-number: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set Uart port number + + clocks: + maxItems: 1 + + clock-names: + const: s_axi_aclk + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The fixed baud rate that the device was configured for. + + xlnx,data-bits: + enum: [5, 6, 7, 8] + description: + The fixed number of data bits that the device was configured for. + + xlnx,use-parity: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Whether parity checking was enabled when the device was configured. + + xlnx,odd-parity: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Whether odd parity was configured. + +required: + - compatible + - reg + - interrupts + - current-speed + - xlnx,data-bits + - xlnx,use-parity + +allOf: + - $ref: /schemas/serial.yaml# + - if: + properties: + xlnx,use-parity: + contains: + const: 1 + then: + required: + - xlnx,odd-parity + +unevaluatedProperties: false + +examples: + - | + serial@800c0000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + reg = <0x800c0000 0x10000>; + interrupts = <0x0 0x6e 0x1>; + port-number = <0>; + current-speed = <115200>; + xlnx,data-bits = <8>; + xlnx,use-parity = <0>; + }; +... diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst index 87dfcd54a96b..8fe723ab9c67 100644 --- a/Documentation/driver-api/serial/n_gsm.rst +++ b/Documentation/driver-api/serial/n_gsm.rst @@ -12,13 +12,16 @@ modems connected to a physical serial port. How to use it ------------- -1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through - its serial port. Depending on the modem used, you can pass more or less - parameters to this command, -2. switch the serial line to using the n_gsm line discipline by using - TIOCSETD ioctl, -3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl, -4. obtain base gsmtty number for the used serial port, +1. config initiator +^^^^^^^^^^^^^^^^^^^^^ + +1.1 initialize the modem in 0710 mux mode (usually AT+CMUX= command) through + its serial port. Depending on the modem used, you can pass more or less + parameters to this command. +1.2 switch the serial line to using the n_gsm line discipline by using + TIOCSETD ioctl. +1.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl. +1.4 obtain base gsmtty number for the used serial port. Major parts of the initialization program : (a good starting point is util-linux-ng/sys-utils/ldattach.c):: @@ -70,14 +73,14 @@ Major parts of the initialization program : daemon(0,0); pause(); -5. use these devices as plain serial ports. +1.5 use these devices as plain serial ports. for example, it's possible: - and to use gnokii to send / receive SMS on ttygsm1 - to use ppp to establish a datalink on ttygsm2 -6. first close all virtual ports before closing the physical port. +1.6 first close all virtual ports before closing the physical port. Note that after closing the physical port the modem is still in multiplexing mode. This may prevent a successful re-opening of the port later. To avoid @@ -87,6 +90,56 @@ Major parts of the initialization program : 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. +2. config requester +^^^^^^^^^^^^^^^^^^^^^ + +2.1 receive string "AT+CMUX= command" through its serial port,initialize + mux mode config +2.2 switch the serial line to using the n_gsm line discipline by using + TIOCSETD ioctl. +2.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl. +2.4 obtain base gsmtty number for the used serial port, + + #include <stdio.h> + #include <stdint.h> + #include <linux/gsmmux.h> + #include <linux/tty.h> + #define DEFAULT_SPEED B115200 + #define SERIAL_PORT /dev/ttyS0 + + int ldisc = N_GSM0710; + struct gsm_config c; + struct termios configuration; + uint32_t first; + + /* open the serial port */ + fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); + + /* configure the serial port : speed, flow control ... */ + + /* get serial data and check "AT+CMUX=command" parameter ... */ + + /* use n_gsm line discipline */ + ioctl(fd, TIOCSETD, &ldisc); + + /* get n_gsm configuration */ + ioctl(fd, GSMIOC_GETCONF, &c); + /* we are requester and need encoding 0 (basic) */ + c.initiator = 0; + c.encapsulation = 0; + /* our modem defaults to a maximum size of 127 bytes */ + c.mru = 127; + c.mtu = 127; + /* set the new configuration */ + ioctl(fd, GSMIOC_SETCONF, &c); + /* get first gsmtty device node */ + ioctl(fd, GSMIOC_GETFIRST, &first); + printf("first muxed line: /dev/gsmtty%i\n", first); + + /* and wait for ever to keep the line discipline enabled */ + daemon(0,0); + pause(); + Additional Documentation ------------------------ More practical details on the protocol and how it's supported by industrial diff --git a/Documentation/driver-api/serial/tty.rst b/Documentation/driver-api/serial/tty.rst index dd972caacf3e..4b709f392713 100644 --- a/Documentation/driver-api/serial/tty.rst +++ b/Documentation/driver-api/serial/tty.rst @@ -58,7 +58,7 @@ close() This is called on a terminal when the line hangup() Called when the tty line is hung up. The line discipline should cease I/O to the tty. No further calls into the ldisc code will occur. - The return value is ignored. Can sleep. + Can sleep. read() (optional) A process requests reading data from the line. Multiple read calls may occur in parallel diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts index 9f4742fab329..fa9562f78d53 100644 --- a/arch/sh/boot/dts/j2_mimas_v2.dts +++ b/arch/sh/boot/dts/j2_mimas_v2.dts @@ -88,6 +88,8 @@ clock-frequency = <125000000>; compatible = "xlnx,xps-uartlite-1.00.a"; current-speed = <19200>; + xlnx,use-parity = <0>; + xlnx,data-bits = <8>; device_type = "serial"; interrupts = <0x12>; port-number = <0>; diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 5e32e4d5367a..ecdf8e034351 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -793,7 +793,7 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; } diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 7fbbe00e3553..17eb8f2aa48d 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -244,7 +244,7 @@ static int serport_ldisc_compat_ioctl(struct tty_struct *tty, } #endif -static int serport_ldisc_hangup(struct tty_struct *tty) +static void serport_ldisc_hangup(struct tty_struct *tty) { struct serport *serport = (struct serport *) tty->disc_data; unsigned long flags; @@ -254,7 +254,6 @@ static int serport_ldisc_hangup(struct tty_struct *tty) spin_unlock_irqrestore(&serport->lock, flags); wake_up_interruptible(&serport->wait); - return 0; } static void serport_ldisc_write_wakeup(struct tty_struct * tty) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index d42ec7d1bc14..9a4ebda30510 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -664,10 +664,9 @@ static void slcan_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slcan_hangup(struct tty_struct *tty) +static void slcan_hangup(struct tty_struct *tty) { slcan_close(tty); - return 0; } /* Perform I/O control on an active SLCAN channel. */ @@ -692,7 +691,7 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file, return -EINVAL; default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index f4e8793e995d..49f10053a794 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -732,7 +732,7 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, break; } default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } sp_put(sp); diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 29a93d6bfe37..f4429b93a9c8 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -247,10 +247,9 @@ ppp_asynctty_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_asynctty_hangup(struct tty_struct *tty) +static void ppp_asynctty_hangup(struct tty_struct *tty) { ppp_asynctty_close(tty); - return 0; } /* @@ -311,7 +310,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_async_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -323,7 +322,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, default: /* Try the various mode ioctls */ - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } ap_put(ap); diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index af3e048695b6..b3a71b409a80 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -245,10 +245,9 @@ ppp_sync_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_sync_hangup(struct tty_struct *tty) +static void ppp_sync_hangup(struct tty_struct *tty) { ppp_sync_close(tty); - return 0; } /* @@ -304,7 +303,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_sync_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -315,7 +314,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); break; } diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 5435b5689ce6..9f3b4c1aa5ce 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -907,10 +907,9 @@ static void slip_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slip_hangup(struct tty_struct *tty) +static void slip_hangup(struct tty_struct *tty) { slip_close(tty); - return 0; } /************************************************************************ * STANDARD SLIP ENCAPSULATION * @@ -1174,7 +1173,7 @@ static int slip_ioctl(struct tty_struct *tty, struct file *file, /* VSV changes end */ #endif default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c index 9151836190ce..d3eb60059ef1 100644 --- a/drivers/rpmsg/rpmsg_core.c +++ b/drivers/rpmsg/rpmsg_core.c @@ -327,6 +327,27 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, } EXPORT_SYMBOL(rpmsg_trysend_offchannel); +/** + * rpmsg_get_mtu() - get maximum transmission buffer size for sending message. + * @ept: the rpmsg endpoint + * + * This function returns maximum buffer size available for a single outgoing message. + * + * Return: the maximum transmission size on success and an appropriate error + * value on failure. + */ + +ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept) +{ + if (WARN_ON(!ept)) + return -EINVAL; + if (!ept->ops->get_mtu) + return -ENOTSUPP; + + return ept->ops->get_mtu(ept); +} +EXPORT_SYMBOL(rpmsg_get_mtu); + /* * match a rpmsg channel with a channel info struct. * this is used to make sure we're not creating rpmsg devices for channels diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h index a76c344253bf..b1245d3ed7c6 100644 --- a/drivers/rpmsg/rpmsg_internal.h +++ b/drivers/rpmsg/rpmsg_internal.h @@ -53,6 +53,7 @@ struct rpmsg_device_ops { * @trysendto: see @rpmsg_trysendto(), optional * @trysend_offchannel: see @rpmsg_trysend_offchannel(), optional * @poll: see @rpmsg_poll(), optional + * @get_mtu: see @rpmsg_get_mtu(), optional * * Indirection table for the operations that a rpmsg backend should implement. * In addition to @destroy_ept, the backend must at least implement @send and @@ -72,6 +73,7 @@ struct rpmsg_endpoint_ops { void *data, int len); __poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp, poll_table *wait); + ssize_t (*get_mtu)(struct rpmsg_endpoint *ept); }; struct device *rpmsg_find_device(struct device *parent, diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 8e49a3bacfc7..05fd06fc67e9 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -149,6 +149,7 @@ static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst); static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len); +static ssize_t virtio_rpmsg_get_mtu(struct rpmsg_endpoint *ept); static struct rpmsg_device *__rpmsg_create_channel(struct virtproc_info *vrp, struct rpmsg_channel_info *chinfo); @@ -160,6 +161,7 @@ static const struct rpmsg_endpoint_ops virtio_endpoint_ops = { .trysend = virtio_rpmsg_trysend, .trysendto = virtio_rpmsg_trysendto, .trysend_offchannel = virtio_rpmsg_trysend_offchannel, + .get_mtu = virtio_rpmsg_get_mtu, }; /** @@ -696,6 +698,14 @@ static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } +static ssize_t virtio_rpmsg_get_mtu(struct rpmsg_endpoint *ept) +{ + struct rpmsg_device *rpdev = ept->rpdev; + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev); + + return vch->vrp->buf_size - sizeof(struct rpmsg_hdr); +} + static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev, struct rpmsg_hdr *msg, unsigned int len) { diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 23cc988c68a4..cc30ff93e2e4 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -368,6 +368,18 @@ config VCC source "drivers/tty/hvc/Kconfig" +config RPMSG_TTY + tristate "RPMSG tty driver" + depends on RPMSG + help + Say y here to export rpmsg endpoints as tty devices, usually found + in /dev/ttyRPMSGx. + This makes it possible for user-space programs to send and receive + rpmsg messages as a standard tty protocol. + + To compile this driver as a module, choose M here: the module will be + called rpmsg_tty. + endif # TTY source "drivers/tty/serdev/Kconfig" diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index a2bd75fbaaa4..07aca5184a55 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o obj-$(CONFIG_VCC) += vcc.o +obj-$(CONFIG_RPMSG_TTY) += rpmsg_tty.o obj-y += ipwireless/ diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 7b30d5a05e2f..4802cfaa107f 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -49,7 +49,7 @@ #define N_OUTBUF 16 #define N_INBUF 16 -#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) +#define __ALIGNED__ __attribute__((__aligned__(L1_CACHE_BYTES))) static struct tty_driver *hvc_driver; static struct task_struct *hvc_task; diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index bf17e90858b8..e37683e25055 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -45,7 +45,307 @@ #include <asm/io.h> #include <linux/uaccess.h> -#include "moxa.h" +#define MOXA 0x400 +#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ +#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_GET_IOQUEUE (MOXA + 27) +#define MOXA_FLUSH_QUEUE (MOXA + 28) +#define MOXA_GETMSTATUS (MOXA + 65) + +/* + * System Configuration + */ + +#define Magic_code 0x404 + +/* + * for C218 BIOS initialization + */ +#define C218_ConfBase 0x800 +#define C218_status (C218_ConfBase + 0) /* BIOS running status */ +#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ +#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ +#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ +#define C218check_sum (C218_ConfBase + 8) /* BYTE */ +#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ +#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ +#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ +#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ +#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ + +#define C218_LoadBuf 0x0F00 +#define C218_KeyCode 0x218 +#define CP204J_KeyCode 0x204 + +/* + * for C320 BIOS initialization + */ +#define C320_ConfBase 0x800 +#define C320_LoadBuf 0x0f00 +#define STS_init 0x05 /* for C320_status */ + +#define C320_status C320_ConfBase + 0 /* BIOS running status */ +#define C320_diag C320_ConfBase + 2 /* diagnostic status */ +#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ +#define C320DLoad_len C320_ConfBase + 6 /* WORD */ +#define C320check_sum C320_ConfBase + 8 /* WORD */ +#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ +#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ +#define C320UART_no C320_ConfBase + 0x0e /* WORD */ + +#define C320_KeyCode 0x320 + +#define FixPage_addr 0x0000 /* starting addr of static page */ +#define DynPage_addr 0x2000 /* starting addr of dynamic page */ +#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ +#define Control_reg 0x1ff0 /* select page and reset control */ +#define HW_reset 0x80 + +/* + * Function Codes + */ +#define FC_CardReset 0x80 +#define FC_ChannelReset 1 /* C320 firmware not supported */ +#define FC_EnableCH 2 +#define FC_DisableCH 3 +#define FC_SetParam 4 +#define FC_SetMode 5 +#define FC_SetRate 6 +#define FC_LineControl 7 +#define FC_LineStatus 8 +#define FC_XmitControl 9 +#define FC_FlushQueue 10 +#define FC_SendBreak 11 +#define FC_StopBreak 12 +#define FC_LoopbackON 13 +#define FC_LoopbackOFF 14 +#define FC_ClrIrqTable 15 +#define FC_SendXon 16 +#define FC_SetTermIrq 17 /* C320 firmware not supported */ +#define FC_SetCntIrq 18 /* C320 firmware not supported */ +#define FC_SetBreakIrq 19 +#define FC_SetLineIrq 20 +#define FC_SetFlowCtl 21 +#define FC_GenIrq 22 +#define FC_InCD180 23 +#define FC_OutCD180 24 +#define FC_InUARTreg 23 +#define FC_OutUARTreg 24 +#define FC_SetXonXoff 25 +#define FC_OutCD180CCR 26 +#define FC_ExtIQueue 27 +#define FC_ExtOQueue 28 +#define FC_ClrLineIrq 29 +#define FC_HWFlowCtl 30 +#define FC_GetClockRate 35 +#define FC_SetBaud 36 +#define FC_SetDataMode 41 +#define FC_GetCCSR 43 +#define FC_GetDataError 45 +#define FC_RxControl 50 +#define FC_ImmSend 51 +#define FC_SetXonState 52 +#define FC_SetXoffState 53 +#define FC_SetRxFIFOTrig 54 +#define FC_SetTxFIFOCnt 55 +#define FC_UnixRate 56 +#define FC_UnixResetTimer 57 + +#define RxFIFOTrig1 0 +#define RxFIFOTrig4 1 +#define RxFIFOTrig8 2 +#define RxFIFOTrig14 3 + +/* + * Dual-Ported RAM + */ +#define DRAM_global 0 +#define INT_data (DRAM_global + 0) +#define Config_base (DRAM_global + 0x108) + +#define IRQindex (INT_data + 0) +#define IRQpending (INT_data + 4) +#define IRQtable (INT_data + 8) + +/* + * Interrupt Status + */ +#define IntrRx 0x01 /* receiver data O.K. */ +#define IntrTx 0x02 /* transmit buffer empty */ +#define IntrFunc 0x04 /* function complete */ +#define IntrBreak 0x08 /* received break */ +#define IntrLine 0x10 /* line status change + for transmitter */ +#define IntrIntr 0x20 /* received INTR code */ +#define IntrQuit 0x40 /* received QUIT code */ +#define IntrEOF 0x80 /* received EOF code */ + +#define IntrRxTrigger 0x100 /* rx data count reach trigger value */ +#define IntrTxTrigger 0x200 /* tx data count below trigger value */ + +#define Magic_no (Config_base + 0) +#define Card_model_no (Config_base + 2) +#define Total_ports (Config_base + 4) +#define Module_cnt (Config_base + 8) +#define Module_no (Config_base + 10) +#define Timer_10ms (Config_base + 14) +#define Disable_IRQ (Config_base + 20) +#define TMS320_PORT1 (Config_base + 22) +#define TMS320_PORT2 (Config_base + 24) +#define TMS320_CLOCK (Config_base + 26) + +/* + * DATA BUFFER in DRAM + */ +#define Extern_table 0x400 /* Base address of the external table + (24 words * 64) total 3K bytes + (24 words * 128) total 6K bytes */ +#define Extern_size 0x60 /* 96 bytes */ +#define RXrptr 0x00 /* read pointer for RX buffer */ +#define RXwptr 0x02 /* write pointer for RX buffer */ +#define TXrptr 0x04 /* read pointer for TX buffer */ +#define TXwptr 0x06 /* write pointer for TX buffer */ +#define HostStat 0x08 /* IRQ flag and general flag */ +#define FlagStat 0x0A +#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ + /* x x x x | | | | */ + /* | | | + CTS flow */ + /* | | +--- RTS flow */ + /* | +------ TX Xon/Xoff */ + /* +--------- RX Xon/Xoff */ +#define Break_cnt 0x0E /* received break count */ +#define CD180TXirq 0x10 /* if non-0: enable TX irq */ +#define RX_mask 0x12 +#define TX_mask 0x14 +#define Ofs_rxb 0x16 +#define Ofs_txb 0x18 +#define Page_rxb 0x1A +#define Page_txb 0x1C +#define EndPage_rxb 0x1E +#define EndPage_txb 0x20 +#define Data_error 0x22 +#define RxTrigger 0x28 +#define TxTrigger 0x2a + +#define rRXwptr 0x34 +#define Low_water 0x36 + +#define FuncCode 0x40 +#define FuncArg 0x42 +#define FuncArg1 0x44 + +#define C218rx_size 0x2000 /* 8K bytes */ +#define C218tx_size 0x8000 /* 32K bytes */ + +#define C218rx_mask (C218rx_size - 1) +#define C218tx_mask (C218tx_size - 1) + +#define C320p8rx_size 0x2000 +#define C320p8tx_size 0x8000 +#define C320p8rx_mask (C320p8rx_size - 1) +#define C320p8tx_mask (C320p8tx_size - 1) + +#define C320p16rx_size 0x2000 +#define C320p16tx_size 0x4000 +#define C320p16rx_mask (C320p16rx_size - 1) +#define C320p16tx_mask (C320p16tx_size - 1) + +#define C320p24rx_size 0x2000 +#define C320p24tx_size 0x2000 +#define C320p24rx_mask (C320p24rx_size - 1) +#define C320p24tx_mask (C320p24tx_size - 1) + +#define C320p32rx_size 0x1000 +#define C320p32tx_size 0x1000 +#define C320p32rx_mask (C320p32rx_size - 1) +#define C320p32tx_mask (C320p32tx_size - 1) + +#define Page_size 0x2000U +#define Page_mask (Page_size - 1) +#define C218rx_spage 3 +#define C218tx_spage 4 +#define C218rx_pageno 1 +#define C218tx_pageno 4 +#define C218buf_pageno 5 + +#define C320p8rx_spage 3 +#define C320p8tx_spage 4 +#define C320p8rx_pgno 1 +#define C320p8tx_pgno 4 +#define C320p8buf_pgno 5 + +#define C320p16rx_spage 3 +#define C320p16tx_spage 4 +#define C320p16rx_pgno 1 +#define C320p16tx_pgno 2 +#define C320p16buf_pgno 3 + +#define C320p24rx_spage 3 +#define C320p24tx_spage 4 +#define C320p24rx_pgno 1 +#define C320p24tx_pgno 1 +#define C320p24buf_pgno 2 + +#define C320p32rx_spage 3 +#define C320p32tx_ofs C320p32rx_size +#define C320p32tx_spage 3 +#define C320p32buf_pgno 1 + +/* + * Host Status + */ +#define WakeupRx 0x01 +#define WakeupTx 0x02 +#define WakeupBreak 0x08 +#define WakeupLine 0x10 +#define WakeupIntr 0x20 +#define WakeupQuit 0x40 +#define WakeupEOF 0x80 /* used in VTIME control */ +#define WakeupRxTrigger 0x100 +#define WakeupTxTrigger 0x200 +/* + * Flag status + */ +#define Rx_over 0x01 +#define Xoff_state 0x02 +#define Tx_flowOff 0x04 +#define Tx_enable 0x08 +#define CTS_state 0x10 +#define DSR_state 0x20 +#define DCD_state 0x80 +/* + * FlowControl + */ +#define CTS_FlowCtl 1 +#define RTS_FlowCtl 2 +#define Tx_FlowCtl 4 +#define Rx_FlowCtl 8 +#define IXM_IXANY 0x10 + +#define LowWater 128 + +#define DTR_ON 1 +#define RTS_ON 2 +#define CTS_ON 1 +#define DSR_ON 2 +#define DCD_ON 8 + +/* mode definition */ +#define MX_CS8 0x03 +#define MX_CS7 0x02 +#define MX_CS6 0x01 +#define MX_CS5 0x00 + +#define MX_STOP1 0x00 +#define MX_STOP15 0x04 +#define MX_STOP2 0x08 + +#define MX_PARNONE 0x00 +#define MX_PAREVEN 0x40 +#define MX_PARODD 0xC0 +#define MX_PARMARK 0xA0 +#define MX_PARSPACE 0x20 #define MOXA_VERSION "6.0k" diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h deleted file mode 100644 index f0a4381b6861..000000000000 --- a/drivers/tty/moxa.h +++ /dev/null @@ -1,307 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef MOXA_H_FILE -#define MOXA_H_FILE - -#define MOXA 0x400 -#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ -#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_IOQUEUE (MOXA + 27) -#define MOXA_FLUSH_QUEUE (MOXA + 28) -#define MOXA_GETMSTATUS (MOXA + 65) - -/* - * System Configuration - */ - -#define Magic_code 0x404 - -/* - * for C218 BIOS initialization - */ -#define C218_ConfBase 0x800 -#define C218_status (C218_ConfBase + 0) /* BIOS running status */ -#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ -#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ -#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ -#define C218check_sum (C218_ConfBase + 8) /* BYTE */ -#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ -#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ -#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ -#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ -#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ - -#define C218_LoadBuf 0x0F00 -#define C218_KeyCode 0x218 -#define CP204J_KeyCode 0x204 - -/* - * for C320 BIOS initialization - */ -#define C320_ConfBase 0x800 -#define C320_LoadBuf 0x0f00 -#define STS_init 0x05 /* for C320_status */ - -#define C320_status C320_ConfBase + 0 /* BIOS running status */ -#define C320_diag C320_ConfBase + 2 /* diagnostic status */ -#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ -#define C320DLoad_len C320_ConfBase + 6 /* WORD */ -#define C320check_sum C320_ConfBase + 8 /* WORD */ -#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ -#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ -#define C320UART_no C320_ConfBase + 0x0e /* WORD */ - -#define C320_KeyCode 0x320 - -#define FixPage_addr 0x0000 /* starting addr of static page */ -#define DynPage_addr 0x2000 /* starting addr of dynamic page */ -#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ -#define Control_reg 0x1ff0 /* select page and reset control */ -#define HW_reset 0x80 - -/* - * Function Codes - */ -#define FC_CardReset 0x80 -#define FC_ChannelReset 1 /* C320 firmware not supported */ -#define FC_EnableCH 2 -#define FC_DisableCH 3 -#define FC_SetParam 4 -#define FC_SetMode 5 -#define FC_SetRate 6 -#define FC_LineControl 7 -#define FC_LineStatus 8 -#define FC_XmitControl 9 -#define FC_FlushQueue 10 -#define FC_SendBreak 11 -#define FC_StopBreak 12 -#define FC_LoopbackON 13 -#define FC_LoopbackOFF 14 -#define FC_ClrIrqTable 15 -#define FC_SendXon 16 -#define FC_SetTermIrq 17 /* C320 firmware not supported */ -#define FC_SetCntIrq 18 /* C320 firmware not supported */ -#define FC_SetBreakIrq 19 -#define FC_SetLineIrq 20 -#define FC_SetFlowCtl 21 -#define FC_GenIrq 22 -#define FC_InCD180 23 -#define FC_OutCD180 24 -#define FC_InUARTreg 23 -#define FC_OutUARTreg 24 -#define FC_SetXonXoff 25 -#define FC_OutCD180CCR 26 -#define FC_ExtIQueue 27 -#define FC_ExtOQueue 28 -#define FC_ClrLineIrq 29 -#define FC_HWFlowCtl 30 -#define FC_GetClockRate 35 -#define FC_SetBaud 36 -#define FC_SetDataMode 41 -#define FC_GetCCSR 43 -#define FC_GetDataError 45 -#define FC_RxControl 50 -#define FC_ImmSend 51 -#define FC_SetXonState 52 -#define FC_SetXoffState 53 -#define FC_SetRxFIFOTrig 54 -#define FC_SetTxFIFOCnt 55 -#define FC_UnixRate 56 -#define FC_UnixResetTimer 57 - -#define RxFIFOTrig1 0 -#define RxFIFOTrig4 1 -#define RxFIFOTrig8 2 -#define RxFIFOTrig14 3 - -/* - * Dual-Ported RAM - */ -#define DRAM_global 0 -#define INT_data (DRAM_global + 0) -#define Config_base (DRAM_global + 0x108) - -#define IRQindex (INT_data + 0) -#define IRQpending (INT_data + 4) -#define IRQtable (INT_data + 8) - -/* - * Interrupt Status - */ -#define IntrRx 0x01 /* receiver data O.K. */ -#define IntrTx 0x02 /* transmit buffer empty */ -#define IntrFunc 0x04 /* function complete */ -#define IntrBreak 0x08 /* received break */ -#define IntrLine 0x10 /* line status change - for transmitter */ -#define IntrIntr 0x20 /* received INTR code */ -#define IntrQuit 0x40 /* received QUIT code */ -#define IntrEOF 0x80 /* received EOF code */ - -#define IntrRxTrigger 0x100 /* rx data count reach trigger value */ -#define IntrTxTrigger 0x200 /* tx data count below trigger value */ - -#define Magic_no (Config_base + 0) -#define Card_model_no (Config_base + 2) -#define Total_ports (Config_base + 4) -#define Module_cnt (Config_base + 8) -#define Module_no (Config_base + 10) -#define Timer_10ms (Config_base + 14) -#define Disable_IRQ (Config_base + 20) -#define TMS320_PORT1 (Config_base + 22) -#define TMS320_PORT2 (Config_base + 24) -#define TMS320_CLOCK (Config_base + 26) - -/* - * DATA BUFFER in DRAM - */ -#define Extern_table 0x400 /* Base address of the external table - (24 words * 64) total 3K bytes - (24 words * 128) total 6K bytes */ -#define Extern_size 0x60 /* 96 bytes */ -#define RXrptr 0x00 /* read pointer for RX buffer */ -#define RXwptr 0x02 /* write pointer for RX buffer */ -#define TXrptr 0x04 /* read pointer for TX buffer */ -#define TXwptr 0x06 /* write pointer for TX buffer */ -#define HostStat 0x08 /* IRQ flag and general flag */ -#define FlagStat 0x0A -#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ - /* x x x x | | | | */ - /* | | | + CTS flow */ - /* | | +--- RTS flow */ - /* | +------ TX Xon/Xoff */ - /* +--------- RX Xon/Xoff */ -#define Break_cnt 0x0E /* received break count */ -#define CD180TXirq 0x10 /* if non-0: enable TX irq */ -#define RX_mask 0x12 -#define TX_mask 0x14 -#define Ofs_rxb 0x16 -#define Ofs_txb 0x18 -#define Page_rxb 0x1A -#define Page_txb 0x1C -#define EndPage_rxb 0x1E -#define EndPage_txb 0x20 -#define Data_error 0x22 -#define RxTrigger 0x28 -#define TxTrigger 0x2a - -#define rRXwptr 0x34 -#define Low_water 0x36 - -#define FuncCode 0x40 -#define FuncArg 0x42 -#define FuncArg1 0x44 - -#define C218rx_size 0x2000 /* 8K bytes */ -#define C218tx_size 0x8000 /* 32K bytes */ - -#define C218rx_mask (C218rx_size - 1) -#define C218tx_mask (C218tx_size - 1) - -#define C320p8rx_size 0x2000 -#define C320p8tx_size 0x8000 -#define C320p8rx_mask (C320p8rx_size - 1) -#define C320p8tx_mask (C320p8tx_size - 1) - -#define C320p16rx_size 0x2000 -#define C320p16tx_size 0x4000 -#define C320p16rx_mask (C320p16rx_size - 1) -#define C320p16tx_mask (C320p16tx_size - 1) - -#define C320p24rx_size 0x2000 -#define C320p24tx_size 0x2000 -#define C320p24rx_mask (C320p24rx_size - 1) -#define C320p24tx_mask (C320p24tx_size - 1) - -#define C320p32rx_size 0x1000 -#define C320p32tx_size 0x1000 -#define C320p32rx_mask (C320p32rx_size - 1) -#define C320p32tx_mask (C320p32tx_size - 1) - -#define Page_size 0x2000U -#define Page_mask (Page_size - 1) -#define C218rx_spage 3 -#define C218tx_spage 4 -#define C218rx_pageno 1 -#define C218tx_pageno 4 -#define C218buf_pageno 5 - -#define C320p8rx_spage 3 -#define C320p8tx_spage 4 -#define C320p8rx_pgno 1 -#define C320p8tx_pgno 4 -#define C320p8buf_pgno 5 - -#define C320p16rx_spage 3 -#define C320p16tx_spage 4 -#define C320p16rx_pgno 1 -#define C320p16tx_pgno 2 -#define C320p16buf_pgno 3 - -#define C320p24rx_spage 3 -#define C320p24tx_spage 4 -#define C320p24rx_pgno 1 -#define C320p24tx_pgno 1 -#define C320p24buf_pgno 2 - -#define C320p32rx_spage 3 -#define C320p32tx_ofs C320p32rx_size -#define C320p32tx_spage 3 -#define C320p32buf_pgno 1 - -/* - * Host Status - */ -#define WakeupRx 0x01 -#define WakeupTx 0x02 -#define WakeupBreak 0x08 -#define WakeupLine 0x10 -#define WakeupIntr 0x20 -#define WakeupQuit 0x40 -#define WakeupEOF 0x80 /* used in VTIME control */ -#define WakeupRxTrigger 0x100 -#define WakeupTxTrigger 0x200 -/* - * Flag status - */ -#define Rx_over 0x01 -#define Xoff_state 0x02 -#define Tx_flowOff 0x04 -#define Tx_enable 0x08 -#define CTS_state 0x10 -#define DSR_state 0x20 -#define DCD_state 0x80 -/* - * FlowControl - */ -#define CTS_FlowCtl 1 -#define RTS_FlowCtl 2 -#define Tx_FlowCtl 4 -#define Rx_FlowCtl 8 -#define IXM_IXANY 0x10 - -#define LowWater 128 - -#define DTR_ON 1 -#define RTS_ON 2 -#define CTS_ON 1 -#define DSR_ON 2 -#define DCD_ON 8 - -/* mode definition */ -#define MX_CS8 0x03 -#define MX_CS7 0x02 -#define MX_CS6 0x01 -#define MX_CS5 0x00 - -#define MX_STOP1 0x00 -#define MX_STOP15 0x04 -#define MX_STOP2 0x08 - -#define MX_PARNONE 0x00 -#define MX_PAREVEN 0x40 -#define MX_PARODD 0xC0 -#define MX_PARMARK 0xA0 -#define MX_PARSPACE 0x20 - -#endif diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 1216f3985e18..93a95a135a71 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -249,8 +249,9 @@ struct mxser_port { unsigned char x_char; /* xon/xoff character */ u8 IER; /* Interrupt Enable Register */ u8 MCR; /* Modem control register */ + u8 FCR; /* FIFO control register */ - unsigned char ldisc_stop_rx; + bool ldisc_stop_rx; struct async_icount icount; /* kernel counters for 4 input interrupts */ unsigned int timeout; @@ -559,14 +560,20 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ -static void mxser_change_speed(struct tty_struct *tty) +static void mxser_change_speed(struct tty_struct *tty, struct ktermios *old_termios) { struct mxser_port *info = tty->driver_data; - unsigned cflag, cval, fcr; + unsigned cflag, cval; cflag = tty->termios.c_cflag; - mxser_set_baud(tty, tty_get_baud_rate(tty)); + if (mxser_set_baud(tty, tty_get_baud_rate(tty))) { + /* Use previous rate on a failure */ + if (old_termios) { + speed_t baud = tty_termios_baud_rate(old_termios); + tty_encode_baud_rate(tty, baud, baud); + } + } /* byte size and parity */ switch (cflag & CSIZE) { @@ -594,33 +601,26 @@ static void mxser_change_speed(struct tty_struct *tty) if (cflag & CMSPAR) cval |= UART_LCR_SPAR; - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->must_hwid) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - if (info->board->must_hwid) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else { - switch (info->rx_high_water) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } + info->FCR = 0; + if (info->board->must_hwid) { + info->FCR |= UART_FCR_ENABLE_FIFO | + MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else if (info->type != PORT_8250 && info->type != PORT_16450) { + info->FCR |= UART_FCR_ENABLE_FIFO; + switch (info->rx_high_water) { + case 1: + info->FCR |= UART_FCR_TRIGGER_1; + break; + case 4: + info->FCR |= UART_FCR_TRIGGER_4; + break; + case 8: + info->FCR |= UART_FCR_TRIGGER_8; + break; + default: + info->FCR |= UART_FCR_TRIGGER_14; + break; } } @@ -680,7 +680,7 @@ static void mxser_change_speed(struct tty_struct *tty) } - outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(info->FCR, info->ioaddr + UART_FCR); outb(cval, info->ioaddr + UART_LCR); } @@ -707,6 +707,16 @@ static void mxser_check_modem_status(struct tty_struct *tty, mxser_handle_cts(tty, port, status); } +static void mxser_disable_and_clear_FIFO(struct mxser_port *info) +{ + u8 fcr = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; + + if (info->board->must_hwid) + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + + outb(fcr, info->ioaddr + UART_FCR); +} + static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { struct mxser_port *info = container_of(port, struct mxser_port, port); @@ -731,13 +741,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) * Clear the FIFO buffers and disable them * (they will be reenabled in mxser_change_speed()) */ - if (info->board->must_hwid) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); + mxser_disable_and_clear_FIFO(info); /* * At this point there's no way the LSR could still be 0xFF; @@ -791,7 +795,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) /* * and set the speed of the serial port */ - mxser_change_speed(tty); + mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, flags); return 0; @@ -825,13 +829,7 @@ static void mxser_shutdown_port(struct tty_port *port) outb(0x00, info->ioaddr + UART_IER); /* clear Rx/Tx FIFO's */ - if (info->board->must_hwid) - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE, - info->ioaddr + UART_FCR); - else - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - info->ioaddr + UART_FCR); + mxser_disable_and_clear_FIFO(info); /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); @@ -862,17 +860,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) static void mxser_flush_buffer(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - char fcr; unsigned long flags; spin_lock_irqsave(&info->slock, flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - fcr = inb(info->ioaddr + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + outb(info->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, info->ioaddr + UART_FCR); - outb(fcr, info->ioaddr + UART_FCR); spin_unlock_irqrestore(&info->slock, flags); @@ -1119,7 +1114,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, if (tty_port_initialized(port)) { if (old_speed != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); - mxser_change_speed(tty); + mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } } else { @@ -1335,7 +1330,7 @@ static void mxser_stoprx(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; - info->ldisc_stop_rx = 1; + info->ldisc_stop_rx = true; if (I_IXOFF(tty)) { if (info->board->must_hwid) { info->IER &= ~MOXA_MUST_RECV_ISR; @@ -1368,7 +1363,7 @@ static void mxser_unthrottle(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; /* startrx */ - info->ldisc_stop_rx = 0; + info->ldisc_stop_rx = false; if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; @@ -1425,7 +1420,7 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi unsigned long flags; spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(tty); + mxser_change_speed(tty, old_termios); spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { @@ -1544,11 +1539,7 @@ static bool mxser_receive_chars_new(struct tty_struct *tty, if (hwid == MOXA_OTHER_UART) return false; - if (status & UART_LSR_BRK_ERROR_BITS) - return false; - if (hwid == MOXA_MUST_MU860_HWID && (status & MOXA_MUST_LSR_RERR)) - return false; - if (status & MOXA_MUST_LSR_RERR) + if (status & (UART_LSR_BRK_ERROR_BITS | MOXA_MUST_LSR_RERR)) return false; gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); @@ -1582,8 +1573,7 @@ static u8 mxser_receive_chars_old(struct tty_struct *tty, ch = inb(port->ioaddr + UART_RX); if (hwid && (status & UART_LSR_OE)) - outb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - MOXA_MUST_FCR_GDA_MODE_ENABLE, + outb(port->FCR | UART_FCR_CLEAR_RCVR, port->ioaddr + UART_FCR); status &= port->read_status_mask; if (status & port->ignore_status_mask) { @@ -1695,8 +1685,7 @@ static bool mxser_port_isr(struct mxser_port *port) tty = tty_port_tty_get(&port->port); if (!tty || port->closing || !tty_port_initialized(&port->port)) { status = inb(port->ioaddr + UART_LSR); - outb(MOXA_MUST_FCR_GDA_MODE_ENABLE | UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + outb(port->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, port->ioaddr + UART_FCR); inb(port->ioaddr + UART_MSR); @@ -1847,7 +1836,7 @@ static void mxser_initbrd(struct mxser_board *brd, bool high_baud) tty_port_init(&info->port); info->port.ops = &mxser_port_ops; info->board = brd; - info->ldisc_stop_rx = 0; + info->ldisc_stop_rx = false; /* Enhance mode enabled here */ if (brd->must_hwid != MOXA_OTHER_UART) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 1d92d2a84889..0b96b14bbfe1 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -271,6 +271,10 @@ static DEFINE_SPINLOCK(gsm_mux_lock); static struct tty_driver *gsm_tty_driver; +/* Save dlci open address */ +static int addr_open[256] = { 0 }; +/* Save dlci open count */ +static int addr_cnt; /* * This section of the driver logic implements the GSM encodings * both the basic and the 'advanced'. Reliable transport is not @@ -587,6 +591,10 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) return; } gsmld_output(gsm, cbuf, len); + if (!gsm->initiator) { + cr = cr & gsm->initiator; + control = control & ~PF; + } gsm_print_packet("-->", addr, cr, control, NULL, 0); } @@ -601,7 +609,7 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) static inline void gsm_response(struct gsm_mux *gsm, int addr, int control) { - gsm_send(gsm, addr, 0, control); + gsm_send(gsm, addr, 1, control); } /** @@ -687,7 +695,7 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) print_hex_dump_bytes("gsm_data_kick: ", DUMP_PREFIX_OFFSET, gsm->txframe, len); - if (gsmld_output(gsm, gsm->txframe, len) < 0) + if (gsmld_output(gsm, gsm->txframe, len) <= 0) break; /* FIXME: Can eliminate one SOF in many more cases */ gsm->tx_bytes -= msg->len; @@ -1177,6 +1185,7 @@ static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen) } static void gsm_dlci_begin_close(struct gsm_dlci *dlci); +static void gsm_dlci_close(struct gsm_dlci *dlci); /** * gsm_control_message - DLCI 0 control processing @@ -1195,15 +1204,28 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, { u8 buf[1]; unsigned long flags; + struct gsm_dlci *dlci; + int i; + int address; switch (command) { case CMD_CLD: { - struct gsm_dlci *dlci = gsm->dlci[0]; + if (addr_cnt > 0) { + for (i = 0; i < addr_cnt; i++) { + address = addr_open[i]; + dlci = gsm->dlci[address]; + gsm_dlci_close(dlci); + addr_open[i] = 0; + } + } /* Modem wishes to close down */ + dlci = gsm->dlci[0]; if (dlci) { dlci->dead = true; gsm->dead = true; - gsm_dlci_begin_close(dlci); + gsm_dlci_close(dlci); + addr_cnt = 0; + gsm_response(gsm, 0, UA|PF); } } break; @@ -1429,6 +1451,8 @@ static void gsm_dlci_close(struct gsm_dlci *dlci) kfifo_reset(&dlci->fifo); } else dlci->gsm->dead = true; + /* Unregister gsmtty driver,report gsmtty dev remove uevent for user */ + tty_unregister_device(gsm_tty_driver, dlci->addr); wake_up(&dlci->gsm->event); /* A DLCI 0 close is a MUX termination so we need to kick that back to userspace somehow */ @@ -1450,6 +1474,8 @@ static void gsm_dlci_open(struct gsm_dlci *dlci) dlci->state = DLCI_OPEN; if (debug & 8) pr_debug("DLCI %d goes open.\n", dlci->addr); + /* Register gsmtty driver,report gsmtty dev add uevent for user */ + tty_register_device(gsm_tty_driver, dlci->addr, NULL); wake_up(&dlci->gsm->event); } @@ -1748,6 +1774,7 @@ static void gsm_queue(struct gsm_mux *gsm) struct gsm_dlci *dlci; u8 cr; int address; + int i, j, k, address_tmp; /* We have to sneak a look at the packet body to do the FCS. A somewhat layering violation in the spec */ @@ -1779,29 +1806,59 @@ static void gsm_queue(struct gsm_mux *gsm) switch (gsm->control) { case SABM|PF: - if (cr == 0) + if (cr == 1) goto invalid; if (dlci == NULL) dlci = gsm_dlci_alloc(gsm, address); if (dlci == NULL) return; if (dlci->dead) - gsm_response(gsm, address, DM); + gsm_response(gsm, address, DM|PF); else { - gsm_response(gsm, address, UA); + gsm_response(gsm, address, UA|PF); gsm_dlci_open(dlci); + /* Save dlci open address */ + if (address) { + addr_open[addr_cnt] = address; + addr_cnt++; + } } break; case DISC|PF: - if (cr == 0) + if (cr == 1) goto invalid; if (dlci == NULL || dlci->state == DLCI_CLOSED) { - gsm_response(gsm, address, DM); + gsm_response(gsm, address, DM|PF); return; } /* Real close complete */ - gsm_response(gsm, address, UA); - gsm_dlci_close(dlci); + if (!address) { + if (addr_cnt > 0) { + for (i = 0; i < addr_cnt; i++) { + address = addr_open[i]; + dlci = gsm->dlci[address]; + gsm_dlci_close(dlci); + addr_open[i] = 0; + } + } + dlci = gsm->dlci[0]; + gsm_dlci_close(dlci); + addr_cnt = 0; + gsm_response(gsm, 0, UA|PF); + } else { + gsm_response(gsm, address, UA|PF); + gsm_dlci_close(dlci); + /* clear dlci address */ + for (j = 0; j < addr_cnt; j++) { + address_tmp = addr_open[j]; + if (address_tmp == address) { + for (k = j; k < addr_cnt; k++) + addr_open[k] = addr_open[k+1]; + addr_cnt--; + break; + } + } + } break; case UA: case UA|PF: @@ -2300,7 +2357,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) * configuration */ - if (need_close || need_restart) { + if (gsm->initiator && (need_close || need_restart)) { int ret; ret = gsm_disconnect(gsm); @@ -2358,8 +2415,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len) if (debug & 4) print_hex_dump_bytes("gsmld_output: ", DUMP_PREFIX_OFFSET, data, len); - gsm->tty->ops->write(gsm->tty, data, len); - return len; + return gsm->tty->ops->write(gsm->tty, data, len); } /** @@ -2384,17 +2440,19 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) else { /* Don't register device 0 - this is the control channel and not a usable tty interface */ - base = mux_num_to_base(gsm); /* Base for this MUX */ - for (i = 1; i < NUM_DLCI; i++) { - struct device *dev; + if (gsm->initiator) { + base = mux_num_to_base(gsm); /* Base for this MUX */ + for (i = 1; i < NUM_DLCI; i++) { + struct device *dev; - dev = tty_register_device(gsm_tty_driver, + dev = tty_register_device(gsm_tty_driver, base + i, NULL); - if (IS_ERR(dev)) { - for (i--; i >= 1; i--) - tty_unregister_device(gsm_tty_driver, - base + i); - return PTR_ERR(dev); + if (IS_ERR(dev)) { + for (i--; i >= 1; i--) + tty_unregister_device(gsm_tty_driver, + base + i); + return PTR_ERR(dev); + } } } } @@ -2416,8 +2474,10 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) int i; WARN_ON(tty != gsm->tty); - for (i = 1; i < NUM_DLCI; i++) - tty_unregister_device(gsm_tty_driver, base + i); + if (gsm->initiator) { + for (i = 1; i < NUM_DLCI; i++) + tty_unregister_device(gsm_tty_driver, base + i); + } gsm_cleanup_mux(gsm); tty_kref_put(gsm->tty); gsm->tty = NULL; @@ -2651,7 +2711,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file, base = mux_num_to_base(gsm); return put_user(base + 1, (__u32 __user *)arg); default: - return n_tty_ioctl_helper(tty, file, cmd, arg); + return n_tty_ioctl_helper(tty, cmd, arg); } } @@ -3000,6 +3060,7 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) { struct gsm_dlci *dlci = tty->driver_data; struct tty_port *port = &dlci->port; + struct gsm_mux *gsm = dlci->gsm; port->count++; tty_port_tty_set(port, tty); @@ -3009,7 +3070,8 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) a DM straight back. This is ok as that will have caused a hangup */ tty_port_set_initialized(port, 1); /* Start sending off SABM messages */ - gsm_dlci_begin_open(dlci); + if (gsm->initiator) + gsm_dlci_begin_open(dlci); /* And wait for virtual carrier */ return tty_port_block_til_ready(port, tty, filp); } diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 580a37b3fe1b..7e0884ecc74f 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -630,7 +630,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, fallthrough; /* to default */ default: - error = n_tty_ioctl_helper(tty, file, cmd, arg); + error = n_tty_ioctl_helper(tty, cmd, arg); break; } return error; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0ec93f1a61f5..5be6d02dc690 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2418,7 +2418,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, up_write(&tty->termios_rwsem); return put_user(retval, (unsigned int __user *) arg); default: - return n_tty_ioctl_helper(tty, file, cmd, arg); + return n_tty_ioctl_helper(tty, cmd, arg); } } @@ -2450,7 +2450,6 @@ void n_tty_inherit_ops(struct tty_ldisc_ops *ops) { *ops = n_tty_ops; ops->owner = NULL; - ops->flags = 0; } EXPORT_SYMBOL_GPL(n_tty_inherit_ops); diff --git a/drivers/tty/rpmsg_tty.c b/drivers/tty/rpmsg_tty.c new file mode 100644 index 000000000000..dae2a4e44f38 --- /dev/null +++ b/drivers/tty/rpmsg_tty.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 STMicroelectronics - All Rights Reserved + * + * The rpmsg tty driver implements serial communication on the RPMsg bus to makes + * possible for user-space programs to send and receive rpmsg messages as a standard + * tty protocol. + * + * The remote processor can instantiate a new tty by requesting a "rpmsg-tty" RPMsg service. + * The "rpmsg-tty" service is directly used for data exchange. No flow control is implemented yet. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/rpmsg.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#define RPMSG_TTY_NAME "ttyRPMSG" +#define MAX_TTY_RPMSG 32 + +static DEFINE_IDR(tty_idr); /* tty instance id */ +static DEFINE_MUTEX(idr_lock); /* protects tty_idr */ + +static struct tty_driver *rpmsg_tty_driver; + +struct rpmsg_tty_port { + struct tty_port port; /* TTY port data */ + int id; /* TTY rpmsg index */ + struct rpmsg_device *rpdev; /* rpmsg device */ +}; + +static int rpmsg_tty_cb(struct rpmsg_device *rpdev, void *data, int len, void *priv, u32 src) +{ + struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev); + int copied; + + if (!len) + return -EINVAL; + copied = tty_insert_flip_string(&cport->port, data, len); + if (copied != len) + dev_err_ratelimited(&rpdev->dev, "Trunc buffer: available space is %d\n", copied); + tty_flip_buffer_push(&cport->port); + + return 0; +} + +static int rpmsg_tty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct rpmsg_tty_port *cport = idr_find(&tty_idr, tty->index); + + tty->driver_data = cport; + + return tty_port_install(&cport->port, driver, tty); +} + +static int rpmsg_tty_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(tty->port, tty, filp); +} + +static void rpmsg_tty_close(struct tty_struct *tty, struct file *filp) +{ + return tty_port_close(tty->port, tty, filp); +} + +static int rpmsg_tty_write(struct tty_struct *tty, const u8 *buf, int len) +{ + struct rpmsg_tty_port *cport = tty->driver_data; + struct rpmsg_device *rpdev; + int msg_max_size, msg_size; + int ret; + + rpdev = cport->rpdev; + + msg_max_size = rpmsg_get_mtu(rpdev->ept); + if (msg_max_size < 0) + return msg_max_size; + + msg_size = min(len, msg_max_size); + + /* + * Use rpmsg_trysend instead of rpmsg_send to send the message so the caller is not + * hung until a rpmsg buffer is available. In such case rpmsg_trysend returns -ENOMEM. + */ + ret = rpmsg_trysend(rpdev->ept, (void *)buf, msg_size); + if (ret) { + dev_dbg_ratelimited(&rpdev->dev, "rpmsg_send failed: %d\n", ret); + return ret; + } + + return msg_size; +} + +static unsigned int rpmsg_tty_write_room(struct tty_struct *tty) +{ + struct rpmsg_tty_port *cport = tty->driver_data; + int size; + + size = rpmsg_get_mtu(cport->rpdev->ept); + if (size < 0) + return 0; + + return size; +} + +static const struct tty_operations rpmsg_tty_ops = { + .install = rpmsg_tty_install, + .open = rpmsg_tty_open, + .close = rpmsg_tty_close, + .write = rpmsg_tty_write, + .write_room = rpmsg_tty_write_room, +}; + +static struct rpmsg_tty_port *rpmsg_tty_alloc_cport(void) +{ + struct rpmsg_tty_port *cport; + int ret; + + cport = kzalloc(sizeof(*cport), GFP_KERNEL); + if (!cport) + return ERR_PTR(-ENOMEM); + + mutex_lock(&idr_lock); + ret = idr_alloc(&tty_idr, cport, 0, MAX_TTY_RPMSG, GFP_KERNEL); + mutex_unlock(&idr_lock); + + if (ret < 0) { + kfree(cport); + return ERR_PTR(ret); + } + + cport->id = ret; + + return cport; +} + +static void rpmsg_tty_release_cport(struct rpmsg_tty_port *cport) +{ + mutex_lock(&idr_lock); + idr_remove(&tty_idr, cport->id); + mutex_unlock(&idr_lock); + + kfree(cport); +} + +static const struct tty_port_operations rpmsg_tty_port_ops = { }; + +static int rpmsg_tty_probe(struct rpmsg_device *rpdev) +{ + struct rpmsg_tty_port *cport; + struct device *dev = &rpdev->dev; + struct device *tty_dev; + int ret; + + cport = rpmsg_tty_alloc_cport(); + if (IS_ERR(cport)) + return dev_err_probe(dev, PTR_ERR(cport), "Failed to alloc tty port\n"); + + tty_port_init(&cport->port); + cport->port.ops = &rpmsg_tty_port_ops; + + tty_dev = tty_port_register_device(&cport->port, rpmsg_tty_driver, + cport->id, dev); + if (IS_ERR(tty_dev)) { + ret = dev_err_probe(dev, PTR_ERR(tty_dev), "Failed to register tty port\n"); + goto err_destroy; + } + + cport->rpdev = rpdev; + + dev_set_drvdata(dev, cport); + + dev_dbg(dev, "New channel: 0x%x -> 0x%x: " RPMSG_TTY_NAME "%d\n", + rpdev->src, rpdev->dst, cport->id); + + return 0; + +err_destroy: + tty_port_destroy(&cport->port); + rpmsg_tty_release_cport(cport); + + return ret; +} + +static void rpmsg_tty_remove(struct rpmsg_device *rpdev) +{ + struct rpmsg_tty_port *cport = dev_get_drvdata(&rpdev->dev); + + dev_dbg(&rpdev->dev, "Removing rpmsg tty device %d\n", cport->id); + + /* User hang up to release the tty */ + if (tty_port_initialized(&cport->port)) + tty_port_tty_hangup(&cport->port, false); + + tty_unregister_device(rpmsg_tty_driver, cport->id); + + tty_port_destroy(&cport->port); + rpmsg_tty_release_cport(cport); +} + +static struct rpmsg_device_id rpmsg_driver_tty_id_table[] = { + { .name = "rpmsg-tty" }, + { }, +}; +MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_tty_id_table); + +static struct rpmsg_driver rpmsg_tty_rpmsg_drv = { + .drv.name = KBUILD_MODNAME, + .id_table = rpmsg_driver_tty_id_table, + .probe = rpmsg_tty_probe, + .callback = rpmsg_tty_cb, + .remove = rpmsg_tty_remove, +}; + +static int __init rpmsg_tty_init(void) +{ + int ret; + + rpmsg_tty_driver = tty_alloc_driver(MAX_TTY_RPMSG, TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV); + if (IS_ERR(rpmsg_tty_driver)) + return PTR_ERR(rpmsg_tty_driver); + + rpmsg_tty_driver->driver_name = "rpmsg_tty"; + rpmsg_tty_driver->name = RPMSG_TTY_NAME; + rpmsg_tty_driver->major = 0; + rpmsg_tty_driver->type = TTY_DRIVER_TYPE_CONSOLE; + + /* Disable unused mode by default */ + rpmsg_tty_driver->init_termios = tty_std_termios; + rpmsg_tty_driver->init_termios.c_lflag &= ~(ECHO | ICANON); + rpmsg_tty_driver->init_termios.c_oflag &= ~(OPOST | ONLCR); + + tty_set_operations(rpmsg_tty_driver, &rpmsg_tty_ops); + + ret = tty_register_driver(rpmsg_tty_driver); + if (ret < 0) { + pr_err("Couldn't install driver: %d\n", ret); + goto error_put; + } + + ret = register_rpmsg_driver(&rpmsg_tty_rpmsg_drv); + if (ret < 0) { + pr_err("Couldn't register driver: %d\n", ret); + goto error_unregister; + } + + return 0; + +error_unregister: + tty_unregister_driver(rpmsg_tty_driver); + +error_put: + tty_driver_kref_put(rpmsg_tty_driver); + + return ret; +} + +static void __exit rpmsg_tty_exit(void) +{ + unregister_rpmsg_driver(&rpmsg_tty_rpmsg_drv); + tty_unregister_driver(rpmsg_tty_driver); + tty_driver_kref_put(rpmsg_tty_driver); + idr_destroy(&tty_idr); +} + +module_init(rpmsg_tty_init); +module_exit(rpmsg_tty_exit); + +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>"); +MODULE_DESCRIPTION("remote processor messaging tty driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a3a0154da567..53f57c3b9f42 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -338,23 +338,16 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, rate = clk_round_rate(d->clk, newrate); if (rate > 0) { /* - * Premilinary set the uartclk to the new clock rate so the - * clock update event handler caused by the clk_set_rate() - * calling wouldn't actually update the UART divisor since - * we about to do this anyway. + * Note that any clock-notifer worker will block in + * serial8250_update_uartclk() until we are done. */ - swap(p->uartclk, rate); ret = clk_set_rate(d->clk, newrate); - if (ret) - swap(p->uartclk, rate); + if (!ret) + p->uartclk = rate; } clk_prepare_enable(d->clk); - p->status &= ~UPSTAT_AUTOCTS; - if (termios->c_cflag & CRTSCTS) - p->status |= UPSTAT_AUTOCTS; - - serial8250_do_set_termios(p, termios, old); + dw8250_do_set_termios(p, termios, old); } static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) @@ -393,8 +386,9 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { - if (p->dev->of_node) { - struct device_node *np = p->dev->of_node; + struct device_node *np = p->dev->of_node; + + if (np) { int id; /* get index of serial line, if found in DT aliases */ @@ -411,11 +405,13 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) data->skip_autocfg = true; } #endif - if (of_device_is_big_endian(p->dev->of_node)) { + + if (of_device_is_big_endian(np)) { p->iotype = UPIO_MEM32BE; p->serial_in = dw8250_serial_in32be; p->serial_out = dw8250_serial_out32be; } + if (of_device_is_compatible(np, "marvell,armada-38x-uart")) p->serial_out = dw8250_serial_out38x; @@ -726,7 +722,7 @@ static struct platform_driver dw8250_platform_driver = { .name = "dw-apb-uart", .pm = &dw8250_pm_ops, .of_match_table = dw8250_of_match, - .acpi_match_table = ACPI_PTR(dw8250_acpi_match), + .acpi_match_table = dw8250_acpi_match, }, .probe = dw8250_probe, .remove = dw8250_remove, diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 6d6a78eead3e..622d3b0d89e7 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -77,6 +77,16 @@ static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, serial8250_do_set_divisor(p, baud, quot, quot_frac); } +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old) +{ + p->status &= ~UPSTAT_AUTOCTS; + if (termios->c_cflag & CRTSCTS) + p->status |= UPSTAT_AUTOCTS; + + serial8250_do_set_termios(p, termios, old); +} +EXPORT_SYMBOL_GPL(dw8250_do_set_termios); + void dw8250_setup_port(struct uart_port *p) { struct uart_8250_port *up = up_to_u8250p(p); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 9a12953832d3..83d528e5cc21 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -16,4 +16,5 @@ struct dw8250_port_data { u8 dlf_size; }; +void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old); void dw8250_setup_port(struct uart_port *p); diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index fc65a2293ce9..9c01c531349d 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -23,10 +23,6 @@ #include "8250.h" -struct fsl8250_data { - int line; -}; - int fsl8250_handle_irq(struct uart_port *port) { unsigned char lsr, orig_lsr; @@ -90,6 +86,10 @@ int fsl8250_handle_irq(struct uart_port *port) EXPORT_SYMBOL_GPL(fsl8250_handle_irq); #ifdef CONFIG_ACPI +struct fsl8250_data { + int line; +}; + static int fsl8250_acpi_probe(struct platform_device *pdev) { struct fsl8250_data *data; diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 848d81e3838c..d3bafec7619d 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -100,11 +100,7 @@ static void byt_set_termios(struct uart_port *p, struct ktermios *termios, reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; writel(reg, p->membase + BYT_PRV_CLK); - p->status &= ~UPSTAT_AUTOCTS; - if (termios->c_cflag & CRTSCTS) - p->status |= UPSTAT_AUTOCTS; - - serial8250_do_set_termios(p, termios, old); + dw8250_do_set_termios(p, termios, old); } static unsigned int byt_get_mctrl(struct uart_port *port) @@ -168,6 +164,9 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) * matching with the registered General Purpose DMA controllers. */ up->dma = dma; + + port->set_termios = dw8250_do_set_termios; + return 0; } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 726912b16a55..5d43de143f33 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -75,13 +75,12 @@ static int pci_default_setup(struct serial_private*, static void moan_device(const char *str, struct pci_dev *dev) { - dev_err(&dev->dev, - "%s: %s\n" + pci_err(dev, "%s\n" "Please send the output of lspci -vv, this\n" "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" "manufacturer and name of serial board or\n" "modem board to <linux-serial@vger.kernel.org>.\n", - pci_name(dev), str, dev->vendor, dev->device, + str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } @@ -238,7 +237,7 @@ static int pci_inteli960ni_init(struct pci_dev *dev) /* is firmware started? */ pci_read_config_dword(dev, 0x44, &oldval); if (oldval == 0x00001000L) { /* RESET value */ - dev_dbg(&dev->dev, "Local i960 firmware missing\n"); + pci_dbg(dev, "Local i960 firmware missing\n"); return -ENODEV; } return 0; @@ -515,7 +514,7 @@ static int pci_siig_init(struct pci_dev *dev) if (type == 0x1000) return pci_siig10x_init(dev); - else if (type == 0x2000) + if (type == 0x2000) return pci_siig20x_init(dev); moan_device("Unknown SIIG card", dev); @@ -588,9 +587,8 @@ static int pci_timedia_probe(struct pci_dev *dev) * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) */ if ((dev->subsystem_device & 0x00f0) >= 0x70) { - dev_info(&dev->dev, - "ignoring Timedia subdevice %04x for parport_serial\n", - dev->subsystem_device); + pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); return -ENODEV; } @@ -792,9 +790,9 @@ static int pci_netmos_9900_setup(struct serial_private *priv, bar = 3 * idx; return setup_port(priv, port, bar, 0, board->reg_shift); - } else { - return pci_default_setup(priv, board, port, idx); } + + return pci_default_setup(priv, board, port, idx); } /* the 99xx series comes with a range of device IDs and a variety @@ -827,8 +825,7 @@ static int pci_netmos_9900_numports(struct pci_dev *dev) if (sub_serports > 0) return sub_serports; - dev_err(&dev->dev, - "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); return 0; } @@ -897,18 +894,16 @@ static int pci_netmos_init(struct pci_dev *dev) /* enable IO_Space bit */ #define ITE_887x_POSIO_ENABLE (1 << 31) +/* inta_addr are the configuration addresses of the ITE */ +static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 0x200, 0x280 }; static int pci_ite887x_init(struct pci_dev *dev) { - /* inta_addr are the configuration addresses of the ITE */ - static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, - 0x200, 0x280, 0 }; int ret, i, type; struct resource *iobase = NULL; u32 miscr, uartbar, ioport; /* search for the base-ioport */ - i = 0; - while (inta_addr[i] && iobase == NULL) { + for (i = 0; i < ARRAY_SIZE(inta_addr); i++) { iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, "ite887x"); if (iobase != NULL) { @@ -925,13 +920,11 @@ static int pci_ite887x_init(struct pci_dev *dev) break; } release_region(iobase->start, ITE_887x_IOSIZE); - iobase = NULL; } - i++; } - if (!inta_addr[i]) { - dev_err(&dev->dev, "ite887x: could not find iobase\n"); + if (i == ARRAY_SIZE(inta_addr)) { + pci_err(dev, "could not find iobase\n"); return -ENODEV; } @@ -1026,9 +1019,7 @@ static int pci_endrun_init(struct pci_dev *dev) /* EndRun device */ if (deviceID == 0x07000200) { number_uarts = ioread8(p + 4); - dev_dbg(&dev->dev, - "%d ports detected on EndRun PCI Express device\n", - number_uarts); + pci_dbg(dev, "%d ports detected on EndRun PCI Express device\n", number_uarts); } pci_iounmap(dev, p); return number_uarts; @@ -1058,9 +1049,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) /* Tornado device */ if (deviceID == 0x07000200) { number_uarts = ioread8(p + 4); - dev_dbg(&dev->dev, - "%d ports detected on Oxford PCI Express device\n", - number_uarts); + pci_dbg(dev, "%d ports detected on Oxford PCI Express device\n", number_uarts); } pci_iounmap(dev, p); return number_uarts; @@ -1074,13 +1063,6 @@ static int pci_asix_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -/* Quatech devices have their own extra interface features */ - -struct quatech_feature { - u16 devid; - bool amcc; -}; - #define QPCR_TEST_FOR1 0x3F #define QPCR_TEST_GET1 0x00 #define QPCR_TEST_FOR2 0x40 @@ -1096,42 +1078,30 @@ struct quatech_feature { #define QOPR_CLOCK_X8 0x0003 #define QOPR_CLOCK_RATE_MASK 0x0003 - -static struct quatech_feature quatech_cards[] = { - { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, - { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, - { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, - { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, - { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, - { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, - { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, - { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, - { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, - { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, - { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, - { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, - { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, - { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, - { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, - { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, - { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, - { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, - { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, +/* Quatech devices have their own extra interface features */ +static struct pci_device_id quatech_cards[] = { + { PCI_DEVICE_DATA(QUATECH, QSC100, 1) }, + { PCI_DEVICE_DATA(QUATECH, DSC100, 1) }, + { PCI_DEVICE_DATA(QUATECH, DSC100E, 0) }, + { PCI_DEVICE_DATA(QUATECH, DSC200, 1) }, + { PCI_DEVICE_DATA(QUATECH, DSC200E, 0) }, + { PCI_DEVICE_DATA(QUATECH, ESC100D, 1) }, + { PCI_DEVICE_DATA(QUATECH, ESC100M, 1) }, + { PCI_DEVICE_DATA(QUATECH, QSCP100, 1) }, + { PCI_DEVICE_DATA(QUATECH, DSCP100, 1) }, + { PCI_DEVICE_DATA(QUATECH, QSCP200, 1) }, + { PCI_DEVICE_DATA(QUATECH, DSCP200, 1) }, + { PCI_DEVICE_DATA(QUATECH, ESCLP100, 0) }, + { PCI_DEVICE_DATA(QUATECH, QSCLP100, 0) }, + { PCI_DEVICE_DATA(QUATECH, DSCLP100, 0) }, + { PCI_DEVICE_DATA(QUATECH, SSCLP100, 0) }, + { PCI_DEVICE_DATA(QUATECH, QSCLP200, 0) }, + { PCI_DEVICE_DATA(QUATECH, DSCLP200, 0) }, + { PCI_DEVICE_DATA(QUATECH, SSCLP200, 0) }, + { PCI_DEVICE_DATA(QUATECH, SPPXP_100, 0) }, { 0, } }; -static int pci_quatech_amcc(u16 devid) -{ - struct quatech_feature *qf = &quatech_cards[0]; - while (qf->devid) { - if (qf->devid == devid) - return qf->amcc; - qf++; - } - pr_err("quatech: unknown port type '0x%04X'.\n", devid); - return 0; -}; - static int pci_quatech_rqopr(struct uart_8250_port *port) { unsigned long base = port->port.iobase; @@ -1291,7 +1261,16 @@ static int pci_quatech_rs422(struct uart_8250_port *port) static int pci_quatech_init(struct pci_dev *dev) { - if (pci_quatech_amcc(dev->device)) { + const struct pci_device_id *match; + bool amcc = false; + + match = pci_match_id(quatech_cards, dev); + if (match) + amcc = match->driver_data; + else + pci_err(dev, "unknown port type '0x%04X'.\n", dev->device); + + if (amcc) { unsigned long base = pci_resource_start(dev, 0); if (base) { u32 tmp; @@ -1315,14 +1294,10 @@ static int pci_quatech_setup(struct serial_private *priv, port->port.uartclk = pci_quatech_clock(port); /* For now just warn about RS422 */ if (pci_quatech_rs422(port)) - pr_warn("quatech: software control of RS422 features not currently supported.\n"); + pci_warn(priv->dev, "software control of RS422 features not currently supported.\n"); return pci_default_setup(priv, board, port, idx); } -static void pci_quatech_exit(struct pci_dev *dev) -{ -} - static int pci_default_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1525,7 +1500,7 @@ static int pci_fintek_setup(struct serial_private *priv, /* Get the io address from configuration space */ pci_read_config_word(pdev, config_base + 4, &iobase); - dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); + pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase); port->port.iotype = UPIO_PORT; port->port.iobase = iobase; @@ -1689,7 +1664,7 @@ static int skip_tx_en_setup(struct serial_private *priv, struct uart_8250_port *port, int idx) { port->port.quirks |= UPQ_NO_TXEN_TEST; - dev_dbg(&priv->dev->dev, + pci_dbg(priv->dev, "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", priv->dev->vendor, priv->dev->device, priv->dev->subsystem_vendor, priv->dev->subsystem_device); @@ -2197,7 +2172,6 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .subdevice = PCI_ANY_ID, .init = pci_quatech_init, .setup = pci_quatech_setup, - .exit = pci_quatech_exit, }, /* * Panacom @@ -3981,9 +3955,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) nr_ports = rc; } - priv = kzalloc(sizeof(struct serial_private) + - sizeof(unsigned int) * nr_ports, - GFP_KERNEL); + priv = kzalloc(struct_size(priv, line, nr_ports), GFP_KERNEL); if (!priv) { priv = ERR_PTR(-ENOMEM); goto err_deinit; @@ -4000,12 +3972,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) uart.port.irq = 0; } else { if (pci_match_id(pci_use_msi, dev)) { - dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); + pci_dbg(dev, "Using MSI(-X) interrupts\n"); pci_set_master(dev); uart.port.flags &= ~UPF_SHARE_IRQ; rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); } else { - dev_dbg(&dev->dev, "Using legacy interrupts\n"); + pci_dbg(dev, "Using legacy interrupts\n"); rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); } if (rc < 0) { @@ -4023,12 +3995,12 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) if (quirk->setup(priv, board, &uart, i)) break; - dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", + pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype); priv->line[i] = serial8250_register_8250_port(&uart); if (priv->line[i] < 0) { - dev_err(&dev->dev, + pci_err(dev, "Couldn't register serial port %lx, irq %d, type %d, error %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype, priv->line[i]); @@ -4124,8 +4096,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) } if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - dev_err(&dev->dev, "invalid driver_data: %ld\n", - ent->driver_data); + pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data); return -EINVAL; } @@ -4208,7 +4179,7 @@ static int pciserial_resume_one(struct device *dev) err = pci_enable_device(pdev); /* FIXME: We cannot simply error out here */ if (err) - dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); + pci_err(pdev, "Unable to re-enable ports, trying to continue.\n"); pciserial_resume_ports(priv); } return 0; diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 98e5ee4d0d08..1974bbadc975 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -56,10 +56,6 @@ static const struct pnp_device_id pnp_dev_table[] = { { "BRI1400", 0 }, /* Boca 33.6 Kbps Internal FD34FSVD */ { "BRI3400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI0A49", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, /* Computer Peripherals Inc */ /* EuroViVa CommCenter-33.6 SP PnP */ { "CPI4050", 0 }, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 66374704747e..5775cbff8f6e 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1338,7 +1338,7 @@ static void autoconfig(struct uart_8250_port *up) up->tx_loadsz = uart_config[port->type].tx_loadsz; if (port->type == PORT_UNKNOWN) - goto out_lock; + goto out_unlock; /* * Reset the UART. @@ -1355,7 +1355,7 @@ static void autoconfig(struct uart_8250_port *up) else serial_out(up, UART_IER, 0); -out_lock: +out_unlock: spin_unlock_irqrestore(&port->lock, flags); /* @@ -2696,21 +2696,32 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) { struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; unsigned int baud, quot, frac = 0; struct ktermios *termios; + struct tty_struct *tty; unsigned long flags; - mutex_lock(&port->state->port.mutex); + tty = tty_port_tty_get(tport); + if (!tty) { + mutex_lock(&tport->mutex); + port->uartclk = uartclk; + mutex_unlock(&tport->mutex); + return; + } + + down_write(&tty->termios_rwsem); + mutex_lock(&tport->mutex); if (port->uartclk == uartclk) - goto out_lock; + goto out_unlock; port->uartclk = uartclk; - if (!tty_port_initialized(&port->state->port)) - goto out_lock; + if (!tty_port_initialized(tport)) + goto out_unlock; - termios = &port->state->port.tty->termios; + termios = &tty->termios; baud = serial8250_get_baud_rate(port, termios, NULL); quot = serial8250_get_divisor(port, baud, &frac); @@ -2726,8 +2737,10 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) spin_unlock_irqrestore(&port->lock, flags); serial8250_rpm_put(up); -out_lock: - mutex_unlock(&port->state->port.mutex); +out_unlock: + mutex_unlock(&tport->mutex); + up_write(&tty->termios_rwsem); + tty_kref_put(tty); } EXPORT_SYMBOL_GPL(serial8250_update_uartclk); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 39fc96dc2531..8cd11aa63ed5 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -380,7 +380,7 @@ config SERIAL_8250_DW config SERIAL_8250_EM tristate "Support for Emma Mobile integrated serial port" depends on SERIAL_8250 && HAVE_CLK - depends on ARM || COMPILE_TEST + depends on (ARM && ARCH_RENESAS) || COMPILE_TEST help Selecting this option will add support for the integrated serial port hardware found on the Emma Mobile line of processors. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 131a6a587acd..6ff94cfcd9db 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -239,10 +239,11 @@ config SERIAL_SAMSUNG depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST select SERIAL_CORE help - Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, - providing /dev/ttySAC0, 1 and 2 (note, some machines may not - provide all of these ports, depending on how the serial port - pins are configured. + Support for the on-chip UARTs on the Samsung + S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing + /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of + these ports, depending on how the serial port pins are configured. + Choose Y/M here only if you build for such SoC. config SERIAL_SAMSUNG_UARTS_4 bool diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 249ea35088d2..2c99a47a2535 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2084,7 +2084,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); switch (state) { - case 0: + case UART_PM_STATE_ON: /* * Enable the peripheral clock for this serial port. * This is called on uart_open() or a resume event. @@ -2094,7 +2094,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, /* re-enable interrupts if we disabled some on suspend */ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->backup_imr); break; - case 3: + case UART_PM_STATE_OFF: /* Back up the interrupt mask and disable all interrupts */ atmel_port->backup_imr = atmel_uart_readl(port, ATMEL_US_IMR); atmel_uart_writel(port, ATMEL_US_IDR, -1); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index c719aa2b1832..d6d3db9c3b1f 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1090,6 +1090,7 @@ static void cpm_put_poll_char(struct uart_port *port, cpm_uart_early_write(pinfo, ch, 1, false); } +#ifdef CONFIG_SERIAL_CPM_CONSOLE static struct uart_port *udbg_port; static void udbg_cpm_putc(char c) @@ -1114,6 +1115,7 @@ static int udbg_cpm_getc(void) cpu_relax(); return c; } +#endif /* CONFIG_SERIAL_CPM_CONSOLE */ #endif /* CONFIG_CONSOLE_POLL */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8b121cd869e9..90f82e6c54e4 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2017,7 +2017,7 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count) * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. */ -static void __init +static void imx_uart_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { @@ -2076,7 +2076,7 @@ imx_uart_console_get_options(struct imx_port *sport, int *baud, } } -static int __init +static int imx_uart_console_setup(struct console *co, char *options) { struct imx_port *sport; @@ -2124,12 +2124,24 @@ error_console: return retval; } +static int +imx_uart_console_exit(struct console *co) +{ + struct imx_port *sport = imx_uart_ports[co->index]; + + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); + + return 0; +} + static struct uart_driver imx_uart_uart_driver; static struct console imx_uart_console = { .name = DEV_NAME, .write = imx_uart_console_write, .device = uart_console_device, .setup = imx_uart_console_setup, + .exit = imx_uart_console_exit, .flags = CON_PRINTBUFFER, .index = -1, .data = &imx_uart_uart_driver, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 3df0788ddeb0..dde0824b2fa5 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1426,7 +1426,7 @@ out_clk: return ret; } -static int max310x_remove(struct device *dev) +static void max310x_remove(struct device *dev) { struct max310x_port *s = dev_get_drvdata(dev); int i; @@ -1441,8 +1441,6 @@ static int max310x_remove(struct device *dev) } clk_disable_unprepare(s->clk); - - return 0; } static const struct of_device_id __maybe_unused max310x_dt_ids[] = { @@ -1491,7 +1489,8 @@ static int max310x_spi_probe(struct spi_device *spi) static int max310x_spi_remove(struct spi_device *spi) { - return max310x_remove(&spi->dev); + max310x_remove(&spi->dev); + return 0; } static const struct spi_device_id max310x_id_table[] = { diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index e2f49863e9c2..ca084c10d0bb 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -65,7 +65,7 @@ enum s3c24xx_port_type { struct s3c24xx_uart_info { char *name; enum s3c24xx_port_type type; - unsigned int has_usi; + bool has_usi; unsigned int port_type; unsigned int fifosize; unsigned long rx_fifomask; @@ -2780,7 +2780,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #endif #if defined(CONFIG_ARCH_EXYNOS) -#define EXYNOS_COMMON_SERIAL_DRV_DATA_USI(_has_usi) \ +#define EXYNOS_COMMON_SERIAL_DRV_DATA(_has_usi) \ .info = &(struct s3c24xx_uart_info) { \ .name = "Samsung Exynos UART", \ .type = TYPE_S3C6400, \ @@ -2804,21 +2804,18 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .has_fracval = 1, \ } \ -#define EXYNOS_COMMON_SERIAL_DRV_DATA \ - EXYNOS_COMMON_SERIAL_DRV_DATA_USI(0) - static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA, + EXYNOS_COMMON_SERIAL_DRV_DATA(false), .fifosize = { 256, 64, 16, 16 }, }; static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA, + EXYNOS_COMMON_SERIAL_DRV_DATA(false), .fifosize = { 64, 256, 16, 256 }, }; static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA_USI(1), + EXYNOS_COMMON_SERIAL_DRV_DATA(true), .fifosize = { 256, 64, 64, 64 }, }; diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index acbb615dd28f..64e7e6c8145f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1365,7 +1365,7 @@ out_clk: return ret; } -static int sc16is7xx_remove(struct device *dev) +static void sc16is7xx_remove(struct device *dev) { struct sc16is7xx_port *s = dev_get_drvdata(dev); int i; @@ -1385,8 +1385,6 @@ static int sc16is7xx_remove(struct device *dev) kthread_stop(s->kworker_task); clk_disable_unprepare(s->clk); - - return 0; } static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { @@ -1444,7 +1442,9 @@ static int sc16is7xx_spi_probe(struct spi_device *spi) static int sc16is7xx_spi_remove(struct spi_device *spi) { - return sc16is7xx_remove(&spi->dev); + sc16is7xx_remove(&spi->dev); + + return 0; } static const struct spi_device_id sc16is7xx_spi_id_table[] = { @@ -1497,7 +1497,9 @@ static int sc16is7xx_i2c_probe(struct i2c_client *i2c, static int sc16is7xx_i2c_remove(struct i2c_client *client) { - return sc16is7xx_remove(&client->dev); + sc16is7xx_remove(&client->dev); + + return 0; } static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0e2e35ab64c7..1e738f265eea 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -222,7 +222,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, if (retval == 0) { if (uart_console(uport) && uport->cons->cflag) { tty->termios.c_cflag = uport->cons->cflag; + tty->termios.c_ispeed = uport->cons->ispeed; + tty->termios.c_ospeed = uport->cons->ospeed; uport->cons->cflag = 0; + uport->cons->ispeed = 0; + uport->cons->ospeed = 0; } /* * Initialise the hardware port settings. @@ -290,8 +294,11 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (uport && uart_console(uport) && tty) + if (uport && uart_console(uport) && tty) { uport->cons->cflag = tty->termios.c_cflag; + uport->cons->ispeed = tty->termios.c_ispeed; + uport->cons->ospeed = tty->termios.c_ospeed; + } if (!tty || C_HUPCL(tty)) uart_port_dtr_rts(uport, 0); @@ -2094,8 +2101,11 @@ uart_set_options(struct uart_port *port, struct console *co, * Allow the setting of the UART parameters with a NULL console * too: */ - if (co) + if (co) { co->cflag = termios.c_cflag; + co->ispeed = termios.c_ispeed; + co->ospeed = termios.c_ospeed; + } return 0; } @@ -2229,6 +2239,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) */ memset(&termios, 0, sizeof(struct ktermios)); termios.c_cflag = uport->cons->cflag; + termios.c_ispeed = uport->cons->ispeed; + termios.c_ospeed = uport->cons->ospeed; /* * If that's unset, use the tty termios setting. diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 0ac0371f943b..b79900d0e91a 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -887,7 +887,7 @@ static void __ssp_add_console_port(struct sifive_serial_port *ssp) static void __ssp_remove_console_port(struct sifive_serial_port *ssp) { - sifive_serial_console_ports[ssp->port.line] = 0; + sifive_serial_console_ports[ssp->port.line] = NULL; } #define SIFIVE_SERIAL_CONSOLE (&sifive_serial_console) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 8f032e77b954..3244e7f6818c 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -165,63 +165,61 @@ static int stm32_usart_init_rs485(struct uart_port *port, return uart_get_rs485_mode(port); } -static int stm32_usart_pending_rx(struct uart_port *port, u32 *sr, - int *last_res, bool threaded) +static bool stm32_usart_rx_dma_enabled(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - enum dma_status status; - struct dma_tx_state state; - *sr = readl_relaxed(port->membase + ofs->isr); + if (!stm32_port->rx_ch) + return false; - if (threaded && stm32_port->rx_ch) { - status = dmaengine_tx_status(stm32_port->rx_ch, - stm32_port->rx_ch->cookie, - &state); - if (status == DMA_IN_PROGRESS && (*last_res != state.residue)) - return 1; - else - return 0; - } else if (*sr & USART_SR_RXNE) { - return 1; + return !!(readl_relaxed(port->membase + ofs->cr3) & USART_CR3_DMAR); +} + +/* Return true when data is pending (in pio mode), and false when no data is pending. */ +static bool stm32_usart_pending_rx_pio(struct uart_port *port, u32 *sr) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + *sr = readl_relaxed(port->membase + ofs->isr); + /* Get pending characters in RDR or FIFO */ + if (*sr & USART_SR_RXNE) { + /* Get all pending characters from the RDR or the FIFO when using interrupts */ + if (!stm32_usart_rx_dma_enabled(port)) + return true; + + /* Handle only RX data errors when using DMA */ + if (*sr & USART_SR_ERR_MASK) + return true; } - return 0; + + return false; } -static unsigned long stm32_usart_get_char(struct uart_port *port, u32 *sr, - int *last_res) +static unsigned long stm32_usart_get_char_pio(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long c; - if (stm32_port->rx_ch) { - c = stm32_port->rx_buf[RX_BUF_L - (*last_res)--]; - if ((*last_res) == 0) - *last_res = RX_BUF_L; - } else { - c = readl_relaxed(port->membase + ofs->rdr); - /* apply RDR data mask */ - c &= stm32_port->rdr_mask; - } + c = readl_relaxed(port->membase + ofs->rdr); + /* Apply RDR data mask */ + c &= stm32_port->rdr_mask; return c; } -static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) +static unsigned int stm32_usart_receive_chars_pio(struct uart_port *port) { - struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long c; + unsigned int size = 0; u32 sr; char flag; - spin_lock(&port->lock); - - while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res, - threaded)) { + while (stm32_usart_pending_rx_pio(port, &sr)) { sr |= USART_SR_DUMMY_RX; flag = TTY_NORMAL; @@ -240,8 +238,9 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) writel_relaxed(sr & USART_SR_ERR_MASK, port->membase + ofs->icr); - c = stm32_usart_get_char(port, &sr, &stm32_port->last_res); + c = stm32_usart_get_char_pio(port); port->icount.rx++; + size++; if (sr & USART_SR_ERR_MASK) { if (sr & USART_SR_ORE) { port->icount.overrun++; @@ -275,9 +274,95 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) uart_insert_char(port, sr, USART_SR_ORE, c, flag); } - uart_unlock_and_check_sysrq(port); + return size; +} + +static void stm32_usart_push_buffer_dma(struct uart_port *port, unsigned int dma_size) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct tty_port *ttyport = &stm32_port->port.state->port; + unsigned char *dma_start; + int dma_count, i; - tty_flip_buffer_push(tport); + dma_start = stm32_port->rx_buf + (RX_BUF_L - stm32_port->last_res); + + /* + * Apply rdr_mask on buffer in order to mask parity bit. + * This loop is useless in cs8 mode because DMA copies only + * 8 bits and already ignores parity bit. + */ + if (!(stm32_port->rdr_mask == (BIT(8) - 1))) + for (i = 0; i < dma_size; i++) + *(dma_start + i) &= stm32_port->rdr_mask; + + dma_count = tty_insert_flip_string(ttyport, dma_start, dma_size); + port->icount.rx += dma_count; + if (dma_count != dma_size) + port->icount.buf_overrun++; + stm32_port->last_res -= dma_count; + if (stm32_port->last_res == 0) + stm32_port->last_res = RX_BUF_L; +} + +static unsigned int stm32_usart_receive_chars_dma(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + unsigned int dma_size, size = 0; + + /* DMA buffer is configured in cyclic mode and handles the rollback of the buffer. */ + if (stm32_port->rx_dma_state.residue > stm32_port->last_res) { + /* Conditional first part: from last_res to end of DMA buffer */ + dma_size = stm32_port->last_res; + stm32_usart_push_buffer_dma(port, dma_size); + size = dma_size; + } + + dma_size = stm32_port->last_res - stm32_port->rx_dma_state.residue; + stm32_usart_push_buffer_dma(port, dma_size); + size += dma_size; + + return size; +} + +static unsigned int stm32_usart_receive_chars(struct uart_port *port, bool force_dma_flush) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + enum dma_status rx_dma_status; + u32 sr; + unsigned int size = 0; + + if (stm32_usart_rx_dma_enabled(port) || force_dma_flush) { + rx_dma_status = dmaengine_tx_status(stm32_port->rx_ch, + stm32_port->rx_ch->cookie, + &stm32_port->rx_dma_state); + if (rx_dma_status == DMA_IN_PROGRESS) { + /* Empty DMA buffer */ + size = stm32_usart_receive_chars_dma(port); + sr = readl_relaxed(port->membase + ofs->isr); + if (sr & USART_SR_ERR_MASK) { + /* Disable DMA request line */ + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + + /* Switch to PIO mode to handle the errors */ + size += stm32_usart_receive_chars_pio(port); + + /* Switch back to DMA mode */ + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAR); + } + } else { + /* Disable RX DMA */ + dmaengine_terminate_async(stm32_port->rx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + /* Fall back to interrupt mode */ + dev_dbg(port->dev, "DMA error, fallback to irq mode\n"); + size = stm32_usart_receive_chars_pio(port); + } + } else { + size = stm32_usart_receive_chars_pio(port); + } + + return size; } static void stm32_usart_tx_dma_complete(void *arg) @@ -312,6 +397,20 @@ static void stm32_usart_tx_interrupt_enable(struct uart_port *port) stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE); } +static void stm32_usart_rx_dma_complete(void *arg) +{ + struct uart_port *port = arg; + struct tty_port *tport = &port->state->port; + unsigned int size; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + size = stm32_usart_receive_chars(port, false); + uart_unlock_and_check_sysrq_irqrestore(port, flags); + if (size) + tty_flip_buffer_push(tport); +} + static void stm32_usart_tx_interrupt_disable(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -462,6 +561,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; + unsigned int size; sr = readl_relaxed(port->membase + ofs->isr); @@ -478,8 +578,20 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) pm_wakeup_event(tport->tty->dev, 0); } - if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) - stm32_usart_receive_chars(port, false); + /* + * rx errors in dma mode has to be handled ASAP to avoid overrun as the DMA request + * line has been masked by HW and rx data are stacking in FIFO. + */ + if (!stm32_port->throttled) { + if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_enabled(port)) || + ((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_enabled(port))) { + spin_lock(&port->lock); + size = stm32_usart_receive_chars(port, false); + uart_unlock_and_check_sysrq(port); + if (size) + tty_flip_buffer_push(tport); + } + } if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) { spin_lock(&port->lock); @@ -487,7 +599,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) spin_unlock(&port->lock); } - if (stm32_port->rx_ch) + if (stm32_usart_rx_dma_enabled(port)) return IRQ_WAKE_THREAD; else return IRQ_HANDLED; @@ -496,10 +608,19 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; + struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); + unsigned int size; + unsigned long flags; - if (stm32_port->rx_ch) - stm32_usart_receive_chars(port, true); + /* Receiver timeout irq for DMA RX */ + if (!stm32_port->throttled) { + spin_lock_irqsave(&port->lock, flags); + size = stm32_usart_receive_chars(port, false); + uart_unlock_and_check_sysrq_irqrestore(port, flags); + if (size) + tty_flip_buffer_push(tport); + } return IRQ_HANDLED; } @@ -612,10 +733,19 @@ static void stm32_usart_throttle(struct uart_port *port) unsigned long flags; spin_lock_irqsave(&port->lock, flags); + + /* + * Disable DMA request line if enabled, so the RX data gets queued into the FIFO. + * Hardware flow control is triggered when RX FIFO is full. + */ + if (stm32_usart_rx_dma_enabled(port)) + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); + stm32_port->throttled = true; spin_unlock_irqrestore(&port->lock, flags); } @@ -631,6 +761,14 @@ static void stm32_usart_unthrottle(struct uart_port *port) if (stm32_port->cr3_irq) stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq); + /* + * Switch back to DMA mode (re-enable DMA request line). + * Hardware flow control is stopped when FIFO is not full any more. + */ + if (stm32_port->rx_ch) + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAR); + + stm32_port->throttled = false; spin_unlock_irqrestore(&port->lock, flags); } @@ -640,6 +778,10 @@ static void stm32_usart_stop_rx(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + /* Disable DMA request line. */ + if (stm32_port->rx_ch) + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); @@ -650,6 +792,48 @@ static void stm32_usart_break_ctl(struct uart_port *port, int break_state) { } +static int stm32_usart_start_rx_dma_cyclic(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct dma_async_tx_descriptor *desc; + int ret; + + stm32_port->last_res = RX_BUF_L; + /* Prepare a DMA cyclic transaction */ + desc = dmaengine_prep_dma_cyclic(stm32_port->rx_ch, + stm32_port->rx_dma_buf, + RX_BUF_L, RX_BUF_P, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(port->dev, "rx dma prep cyclic failed\n"); + return -ENODEV; + } + + desc->callback = stm32_usart_rx_dma_complete; + desc->callback_param = port; + + /* Push current DMA transaction in the pending queue */ + ret = dma_submit_error(dmaengine_submit(desc)); + if (ret) { + dmaengine_terminate_sync(stm32_port->rx_ch); + return ret; + } + + /* Issue pending DMA requests */ + dma_async_issue_pending(stm32_port->rx_ch); + + /* + * DMA request line not re-enabled at resume when port is throttled. + * It will be re-enabled by unthrottle ops. + */ + if (!stm32_port->throttled) + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAR); + + return 0; +} + static int stm32_usart_startup(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); @@ -676,6 +860,14 @@ static int stm32_usart_startup(struct uart_port *port) if (ofs->rqr != UNDEF_REG) writel_relaxed(USART_RQR_RXFRQ, port->membase + ofs->rqr); + if (stm32_port->rx_ch) { + ret = stm32_usart_start_rx_dma_cyclic(port); + if (ret) { + free_irq(port->irq, port); + return ret; + } + } + /* RX enabling */ val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit); stm32_usart_set_bits(port, ofs->cr1, val); @@ -708,6 +900,10 @@ static void stm32_usart_shutdown(struct uart_port *port) if (ret) dev_err(port->dev, "Transmission is not complete\n"); + /* Disable RX DMA. */ + if (stm32_port->rx_ch) + dmaengine_terminate_async(stm32_port->rx_ch); + /* flush RX & TX FIFO */ if (ofs->rqr != UNDEF_REG) writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, @@ -810,9 +1006,11 @@ static void stm32_usart_set_termios(struct uart_port *port, stm32_port->cr1_irq = USART_CR1_RTOIE; writel_relaxed(bits, port->membase + ofs->rtor); cr2 |= USART_CR2_RTOEN; - /* Not using dma, enable fifo threshold irq */ - if (!stm32_port->rx_ch) - stm32_port->cr3_irq = USART_CR3_RXFTIE; + /* + * Enable fifo threshold irq in two cases, either when there is no DMA, or when + * wake up over usart, from low power until the DMA gets re-enabled by resume. + */ + stm32_port->cr3_irq = USART_CR3_RXFTIE; } cr1 |= stm32_port->cr1_irq; @@ -875,8 +1073,16 @@ static void stm32_usart_set_termios(struct uart_port *port, if ((termios->c_cflag & CREAD) == 0) port->ignore_status_mask |= USART_SR_DUMMY_RX; - if (stm32_port->rx_ch) + if (stm32_port->rx_ch) { + /* + * Setup DMA to collect only valid data and enable error irqs. + * This also enables break reception when using DMA. + */ + cr1 |= USART_CR1_PEIE; + cr3 |= USART_CR3_EIE; cr3 |= USART_CR3_DMAR; + cr3 |= USART_CR3_DDRE; + } if (rs485conf->flags & SER_RS485_ENABLED) { stm32_usart_config_reg_rs485(&cr1, &cr3, @@ -1166,7 +1372,6 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, struct uart_port *port = &stm32port->port; struct device *dev = &pdev->dev; struct dma_slave_config config; - struct dma_async_tx_descriptor *desc = NULL; int ret; /* @@ -1194,32 +1399,6 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, return ret; } - /* Prepare a DMA cyclic transaction */ - desc = dmaengine_prep_dma_cyclic(stm32port->rx_ch, - stm32port->rx_dma_buf, - RX_BUF_L, RX_BUF_P, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT); - if (!desc) { - dev_err(dev, "rx dma prep cyclic failed\n"); - stm32_usart_of_dma_rx_remove(stm32port, pdev); - return -ENODEV; - } - - /* No callback as dma buffer is drained on usart interrupt */ - desc->callback = NULL; - desc->callback_param = NULL; - - /* Push current DMA transaction in the pending queue */ - ret = dma_submit_error(dmaengine_submit(desc)); - if (ret) { - dmaengine_terminate_sync(stm32port->rx_ch); - stm32_usart_of_dma_rx_remove(stm32port, pdev); - return ret; - } - - /* Issue pending DMA requests */ - dma_async_issue_pending(stm32port->rx_ch); - return 0; } @@ -1372,6 +1551,7 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; int err; + u32 cr3; pm_runtime_get_sync(&pdev->dev); err = uart_remove_one_port(&stm32_usart_driver, port); @@ -1382,7 +1562,12 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_PEIE); + cr3 = readl_relaxed(port->membase + ofs->cr3); + cr3 &= ~USART_CR3_EIE; + cr3 &= ~USART_CR3_DMAR; + cr3 &= ~USART_CR3_DDRE; + writel_relaxed(cr3, port->membase + ofs->cr3); if (stm32_port->tx_ch) { dmaengine_terminate_async(stm32_port->tx_ch); @@ -1391,7 +1576,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) } if (stm32_port->rx_ch) { - dmaengine_terminate_async(stm32_port->rx_ch); stm32_usart_of_dma_rx_remove(stm32_port, pdev); dma_release_channel(stm32_port->rx_ch); } @@ -1504,14 +1688,18 @@ static struct uart_driver stm32_usart_driver = { .cons = STM32_SERIAL_CONSOLE, }; -static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, - bool enable) +static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, + bool enable) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct tty_port *tport = &port->state->port; + int ret; + unsigned int size; + unsigned long flags; - if (!stm32_port->wakeup_src) - return; + if (!stm32_port->wakeup_src || !tty_port_initialized(tport)) + return 0; /* * Enable low-power wake-up and wake-up irq if argument is set to @@ -1520,20 +1708,52 @@ static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, if (enable) { stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM); stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE); + + /* + * When DMA is used for reception, it must be disabled before + * entering low-power mode and re-enabled when exiting from + * low-power mode. + */ + if (stm32_port->rx_ch) { + spin_lock_irqsave(&port->lock, flags); + /* Avoid race with RX IRQ when DMAR is cleared */ + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + /* Poll data from DMA RX buffer if any */ + size = stm32_usart_receive_chars(port, true); + dmaengine_terminate_async(stm32_port->rx_ch); + uart_unlock_and_check_sysrq_irqrestore(port, flags); + if (size) + tty_flip_buffer_push(tport); + } + + /* Poll data from RX FIFO if any */ + stm32_usart_receive_chars(port, false); } else { + if (stm32_port->rx_ch) { + ret = stm32_usart_start_rx_dma_cyclic(port); + if (ret) + return ret; + } + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM); stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); } + + return 0; } static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); + int ret; uart_suspend_port(&stm32_usart_driver, port); - if (device_may_wakeup(dev) || device_wakeup_path(dev)) - stm32_usart_serial_en_wakeup(port, true); + if (device_may_wakeup(dev) || device_wakeup_path(dev)) { + ret = stm32_usart_serial_en_wakeup(port, true); + if (ret) + return ret; + } /* * When "no_console_suspend" is enabled, keep the pinctrl default state @@ -1554,11 +1774,15 @@ static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) static int __maybe_unused stm32_usart_serial_resume(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); + int ret; pinctrl_pm_select_default_state(dev); - if (device_may_wakeup(dev) || device_wakeup_path(dev)) - stm32_usart_serial_en_wakeup(port, false); + if (device_may_wakeup(dev) || device_wakeup_path(dev)) { + ret = stm32_usart_serial_en_wakeup(port, false); + if (ret) + return ret; + } return uart_resume_port(&stm32_usart_driver, port); } diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index 07ac291328cd..e23916bfbb60 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -109,7 +109,7 @@ struct stm32_usart_info stm32h7_info = { /* USART_SR (F4) / USART_ISR (F7) */ #define USART_SR_PE BIT(0) #define USART_SR_FE BIT(1) -#define USART_SR_NF BIT(2) +#define USART_SR_NE BIT(2) /* F7 (NF for F4) */ #define USART_SR_ORE BIT(3) #define USART_SR_IDLE BIT(4) #define USART_SR_RXNE BIT(5) @@ -126,7 +126,8 @@ struct stm32_usart_info stm32h7_info = { #define USART_SR_SBKF BIT(18) /* F7 */ #define USART_SR_WUF BIT(20) /* H7 */ #define USART_SR_TEACK BIT(21) /* F7 */ -#define USART_SR_ERR_MASK (USART_SR_ORE | USART_SR_FE | USART_SR_PE) +#define USART_SR_ERR_MASK (USART_SR_ORE | USART_SR_NE | USART_SR_FE |\ + USART_SR_PE) /* Dummy bits */ #define USART_SR_DUMMY_RX BIT(16) @@ -246,9 +247,9 @@ struct stm32_usart_info stm32h7_info = { #define STM32_SERIAL_NAME "ttySTM" #define STM32_MAX_PORTS 8 -#define RX_BUF_L 200 /* dma rx buffer length */ -#define RX_BUF_P RX_BUF_L /* dma rx buffer period */ -#define TX_BUF_L 200 /* dma tx buffer length */ +#define RX_BUF_L 4096 /* dma rx buffer length */ +#define RX_BUF_P (RX_BUF_L / 2) /* dma rx buffer period */ +#define TX_BUF_L RX_BUF_L /* dma tx buffer length */ struct stm32_port { struct uart_port port; @@ -264,6 +265,7 @@ struct stm32_port { u32 cr3_irq; /* USART_CR3_RXFTIE */ int last_res; bool tx_dma_busy; /* dma tx busy */ + bool throttled; /* port throttled */ bool hw_flow_control; bool swap; /* swap RX & TX pins */ bool fifoen; @@ -272,6 +274,7 @@ struct stm32_port { bool wakeup_src; int rdr_mask; /* receive data register mask */ struct mctrl_gpios *gpios; /* modem control gpios */ + struct dma_tx_state rx_dma_state; }; static struct stm32_port stm32_ports[STM32_MAX_PORTS]; diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index 1a54e3e52ed6..b714b00d2dad 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1125,7 +1125,7 @@ static void sunzilog_free_tables(void) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ -static void sunzilog_putchar(struct uart_port *port, int ch) +static void __maybe_unused sunzilog_putchar(struct uart_port *port, int ch) { struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index dfc1ba4e1572..d3d9566e5dbd 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -8,6 +8,7 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/serial_core.h> @@ -63,9 +64,18 @@ static struct uart_port *console_port; #endif +/** + * struct uartlite_data: Driver private data + * reg_ops: Functions to read/write registers + * clk: Our parent clock, if present + * baud: The baud rate configured when this device was synthesized + * cflags: The cflags for parity and data bits + */ struct uartlite_data { const struct uartlite_reg_ops *reg_ops; struct clk *clk; + unsigned int baud; + tcflag_t cflags; }; struct uartlite_reg_ops { @@ -119,6 +129,8 @@ static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) static struct uart_port ulite_ports[ULITE_NR_UARTS]; +static struct uart_driver ulite_uart_driver; + /* --------------------------------------------------------------------- * Core UART driver operations */ @@ -306,7 +318,12 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int baud; + struct uartlite_data *pdata = port->private_data; + + /* Set termios to what the hardware supports */ + termios->c_cflag &= ~(BRKINT | CSTOPB | PARENB | PARODD | CSIZE); + termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE); + tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud); spin_lock_irqsave(&port->lock, flags); @@ -329,8 +346,7 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; /* update timeout */ - baud = uart_get_baud_rate(port, termios, old, 0, 460800); - uart_update_timeout(port, termios->c_cflag, baud); + uart_update_timeout(port, termios->c_cflag, pdata->baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -532,8 +548,6 @@ static int ulite_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct uart_driver ulite_uart_driver; - static struct console ulite_console = { .name = ULITE_NAME, .write = ulite_console_write, @@ -765,18 +779,73 @@ static int ulite_probe(struct platform_device *pdev) struct uartlite_data *pdata; int irq, ret; int id = pdev->id; -#ifdef CONFIG_OF - const __be32 *prop; - prop = of_get_property(pdev->dev.of_node, "port-number", NULL); - if (prop) - id = be32_to_cpup(prop); -#endif pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data), GFP_KERNEL); if (!pdata) return -ENOMEM; + if (IS_ENABLED(CONFIG_OF)) { + const char *prop; + struct device_node *np = pdev->dev.of_node; + u32 val = 0; + + prop = "port-number"; + ret = of_property_read_u32(np, prop, &id); + if (ret && ret != -EINVAL) +of_err: + return dev_err_probe(&pdev->dev, ret, + "could not read %s\n", prop); + + prop = "current-speed"; + ret = of_property_read_u32(np, prop, &pdata->baud); + if (ret) + goto of_err; + + prop = "xlnx,use-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + if (val) { + prop = "xlnx,odd-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret) + goto of_err; + + if (val) + pdata->cflags |= PARODD; + pdata->cflags |= PARENB; + } + + val = 8; + prop = "xlnx,data-bits"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + switch (val) { + case 5: + pdata->cflags |= CS5; + break; + case 6: + pdata->cflags |= CS6; + break; + case 7: + pdata->cflags |= CS7; + break; + case 8: + pdata->cflags |= CS8; + break; + default: + return dev_err_probe(&pdev->dev, -EINVAL, + "bad data bits %d\n", val); + } + } else { + pdata->baud = 9600; + pdata->cflags = CS8; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 962e522ccc45..d5e243908d9f 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -601,9 +601,10 @@ static void cdns_uart_start_tx(struct uart_port *port) if (uart_circ_empty(&port->state->xmit)) return; + writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR); + cdns_uart_handle_tx(port); - writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR); /* Enable the TX Empty interrupt */ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER); } diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 8d0f07509ca7..bbfd004449b5 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -843,6 +843,8 @@ static bool sysrq_handle_keypress(struct sysrq_state *sysrq, sysrq->shift = KEY_RESERVED; else if (value != 2) sysrq->shift = code; + if (sysrq->active) + sysrq->shift_use = sysrq->shift; break; case KEY_SYSRQ: diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 426b1252781a..d903e111dbcb 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -154,7 +154,7 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, termios->c_ospeed = obaud; #ifdef IBSHIFT - if ((termios->c_cflag >> IBSHIFT) & CBAUD) + if (((termios->c_cflag >> IBSHIFT) & CBAUD) != B0) ibinput = 1; /* An input speed was specified */ #endif #ifdef BOTHER diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 635d0af229b7..6c7e65b1d9a1 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -544,6 +544,9 @@ static void flush_to_ldisc(struct work_struct *work) if (!count) break; head->read += count; + + if (need_resched()) + cond_resched(); } mutex_unlock(&buf->lock); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 507a25d692bb..63181925ec1a 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -675,7 +675,6 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) /** * tty_mode_ioctl - mode related ioctls * @tty: tty for the ioctl - * @file: file pointer for the tty * @cmd: command * @arg: ioctl argument * @@ -684,16 +683,13 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) * consistent mode setting. */ -int tty_mode_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct tty_struct *real_tty; void __user *p = (void __user *)arg; int ret = 0; struct ktermios kterm; - BUG_ON(file == NULL); - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) real_tty = tty->link; @@ -858,8 +854,8 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg) } EXPORT_SYMBOL_GPL(tty_perform_flush); -int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +int n_tty_ioctl_helper(struct tty_struct *tty, unsigned int cmd, + unsigned long arg) { int retval; @@ -904,7 +900,7 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, return __tty_perform_flush(tty, arg); default: /* Try the mode commands */ - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } EXPORT_SYMBOL(n_tty_ioctl_helper); diff --git a/include/linux/console.h b/include/linux/console.h index 20874db50bc8..a97f277cfdfa 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -149,6 +149,8 @@ struct console { short flags; short index; int cflag; + uint ispeed; + uint ospeed; void *data; struct console *next; }; diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index d97dcd049f18..990b80fb49ad 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -186,6 +186,8 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp, poll_table *wait); +ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept); + #else static inline int rpmsg_register_device(struct rpmsg_device *rpdev) @@ -296,6 +298,14 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, return 0; } +static inline ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return -ENXIO; +} + #endif /* IS_ENABLED(CONFIG_RPMSG) */ /* use a macro to avoid include chaining to get THIS_MODULE */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 168e57e40bbb..5dbd7c5afac7 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -252,20 +252,20 @@ static inline bool tty_throttled(struct tty_struct *tty) } #ifdef CONFIG_TTY -extern void tty_kref_put(struct tty_struct *tty); -extern struct pid *tty_get_pgrp(struct tty_struct *tty); -extern void tty_vhangup_self(void); -extern void disassociate_ctty(int priv); -extern dev_t tty_devnum(struct tty_struct *tty); -extern void proc_clear_tty(struct task_struct *p); -extern struct tty_struct *get_current_tty(void); +void tty_kref_put(struct tty_struct *tty); +struct pid *tty_get_pgrp(struct tty_struct *tty); +void tty_vhangup_self(void); +void disassociate_ctty(int priv); +dev_t tty_devnum(struct tty_struct *tty); +void proc_clear_tty(struct task_struct *p); +struct tty_struct *get_current_tty(void); /* tty_io.c */ -extern int __init tty_init(void); -extern const char *tty_name(const struct tty_struct *tty); -extern struct tty_struct *tty_kopen_exclusive(dev_t device); -extern struct tty_struct *tty_kopen_shared(dev_t device); -extern void tty_kclose(struct tty_struct *tty); -extern int tty_dev_name_to_number(const char *name, dev_t *number); +int __init tty_init(void); +const char *tty_name(const struct tty_struct *tty); +struct tty_struct *tty_kopen_exclusive(dev_t device); +struct tty_struct *tty_kopen_shared(dev_t device); +void tty_kclose(struct tty_struct *tty); +int tty_dev_name_to_number(const char *name, dev_t *number); #else static inline void tty_kref_put(struct tty_struct *tty) { } @@ -296,7 +296,7 @@ static inline int tty_dev_name_to_number(const char *name, dev_t *number) extern struct ktermios tty_std_termios; -extern int vcs_init(void); +int vcs_init(void); extern struct class *tty_class; @@ -316,34 +316,34 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) return tty; } -extern const char *tty_driver_name(const struct tty_struct *tty); -extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); -extern void stop_tty(struct tty_struct *tty); -extern void start_tty(struct tty_struct *tty); -extern void tty_write_message(struct tty_struct *tty, char *msg); -extern int tty_send_xchar(struct tty_struct *tty, char ch); -extern int tty_put_char(struct tty_struct *tty, unsigned char c); -extern unsigned int tty_chars_in_buffer(struct tty_struct *tty); -extern unsigned int tty_write_room(struct tty_struct *tty); -extern void tty_driver_flush_buffer(struct tty_struct *tty); -extern void tty_unthrottle(struct tty_struct *tty); -extern int tty_throttle_safe(struct tty_struct *tty); -extern int tty_unthrottle_safe(struct tty_struct *tty); -extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); -extern int tty_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); -extern int is_current_pgrp_orphaned(void); -extern void tty_hangup(struct tty_struct *tty); -extern void tty_vhangup(struct tty_struct *tty); -extern int tty_hung_up_p(struct file *filp); -extern void do_SAK(struct tty_struct *tty); -extern void __do_SAK(struct tty_struct *tty); -extern void no_tty(void); -extern speed_t tty_termios_baud_rate(struct ktermios *termios); -extern void tty_termios_encode_baud_rate(struct ktermios *termios, - speed_t ibaud, speed_t obaud); -extern void tty_encode_baud_rate(struct tty_struct *tty, - speed_t ibaud, speed_t obaud); +const char *tty_driver_name(const struct tty_struct *tty); +void tty_wait_until_sent(struct tty_struct *tty, long timeout); +void stop_tty(struct tty_struct *tty); +void start_tty(struct tty_struct *tty); +void tty_write_message(struct tty_struct *tty, char *msg); +int tty_send_xchar(struct tty_struct *tty, char ch); +int tty_put_char(struct tty_struct *tty, unsigned char c); +unsigned int tty_chars_in_buffer(struct tty_struct *tty); +unsigned int tty_write_room(struct tty_struct *tty); +void tty_driver_flush_buffer(struct tty_struct *tty); +void tty_unthrottle(struct tty_struct *tty); +int tty_throttle_safe(struct tty_struct *tty); +int tty_unthrottle_safe(struct tty_struct *tty); +int tty_do_resize(struct tty_struct *tty, struct winsize *ws); +int tty_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); +int is_current_pgrp_orphaned(void); +void tty_hangup(struct tty_struct *tty); +void tty_vhangup(struct tty_struct *tty); +int tty_hung_up_p(struct file *filp); +void do_SAK(struct tty_struct *tty); +void __do_SAK(struct tty_struct *tty); +void no_tty(void); +speed_t tty_termios_baud_rate(struct ktermios *termios); +void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, + speed_t obaud); +void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, + speed_t obaud); /** * tty_get_baud_rate - get tty bit rates @@ -363,37 +363,36 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) unsigned char tty_get_char_size(unsigned int cflag); unsigned char tty_get_frame_size(unsigned int cflag); -extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); -extern int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b); -extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); +void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); +int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b); +int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); -extern void tty_wakeup(struct tty_struct *tty); +void tty_wakeup(struct tty_struct *tty); -extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); -extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); -extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); -extern void tty_release_struct(struct tty_struct *tty, int idx); -extern void tty_init_termios(struct tty_struct *tty); -extern void tty_save_termios(struct tty_struct *tty); -extern int tty_standard_install(struct tty_driver *driver, +int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +int tty_perform_flush(struct tty_struct *tty, unsigned long arg); +struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); +void tty_release_struct(struct tty_struct *tty, int idx); +void tty_init_termios(struct tty_struct *tty); +void tty_save_termios(struct tty_struct *tty); +int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty); extern struct mutex tty_mutex; /* n_tty.c */ -extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); +void n_tty_inherit_ops(struct tty_ldisc_ops *ops); #ifdef CONFIG_TTY -extern void __init n_tty_init(void); +void __init n_tty_init(void); #else static inline void n_tty_init(void) { } #endif /* tty_audit.c */ #ifdef CONFIG_AUDIT -extern void tty_audit_exit(void); -extern void tty_audit_fork(struct signal_struct *sig); -extern int tty_audit_push(void); +void tty_audit_exit(void); +void tty_audit_fork(struct signal_struct *sig); +int tty_audit_push(void); #else static inline void tty_audit_exit(void) { @@ -408,24 +407,23 @@ static inline int tty_audit_push(void) #endif /* tty_ioctl.c */ -extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); +int n_tty_ioctl_helper(struct tty_struct *tty, unsigned int cmd, + unsigned long arg); /* vt.c */ -extern int vt_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); +int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -extern long vt_compat_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); +long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, + unsigned long arg); /* tty_mutex.c */ /* functions for preparation of BKL removal */ -extern void tty_lock(struct tty_struct *tty); -extern int tty_lock_interruptible(struct tty_struct *tty); -extern void tty_unlock(struct tty_struct *tty); -extern void tty_lock_slave(struct tty_struct *tty); -extern void tty_unlock_slave(struct tty_struct *tty); -extern void tty_set_lock_subclass(struct tty_struct *tty); +void tty_lock(struct tty_struct *tty); +int tty_lock_interruptible(struct tty_struct *tty); +void tty_unlock(struct tty_struct *tty); +void tty_lock_slave(struct tty_struct *tty); +void tty_unlock_slave(struct tty_struct *tty); +void tty_set_lock_subclass(struct tty_struct *tty); #endif diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index c20431d8def8..795b94ccdeb6 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -327,11 +327,11 @@ struct tty_driver { extern struct list_head tty_drivers; -extern struct tty_driver *__tty_alloc_driver(unsigned int lines, - struct module *owner, unsigned long flags); -extern struct tty_driver *tty_find_polling_driver(char *name, int *line); +struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner, + unsigned long flags); +struct tty_driver *tty_find_polling_driver(char *name, int *line); -extern void tty_driver_kref_put(struct tty_driver *driver); +void tty_driver_kref_put(struct tty_driver *driver); /* Use TTY_DRIVER_* flags below */ #define tty_alloc_driver(lines, flags) \ @@ -360,7 +360,7 @@ static inline void tty_set_operations(struct tty_driver *driver, * Used for PTY's, in particular. * * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will - * guarantee never not to set any special character handling + * guarantee never to set any special character handling * flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR || * !INPCK)). That is, if there is no reason for the driver to * send notifications of parity and break characters up to the diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 32284992b31a..9916acb5de49 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -7,16 +7,16 @@ struct tty_ldisc; -extern int tty_buffer_set_limit(struct tty_port *port, int limit); -extern unsigned int tty_buffer_space_avail(struct tty_port *port); -extern int tty_buffer_request_room(struct tty_port *port, size_t size); -extern int tty_insert_flip_string_flags(struct tty_port *port, +int tty_buffer_set_limit(struct tty_port *port, int limit); +unsigned int tty_buffer_space_avail(struct tty_port *port); +int tty_buffer_request_room(struct tty_port *port, size_t size); +int tty_insert_flip_string_flags(struct tty_port *port, const unsigned char *chars, const char *flags, size_t size); -extern int tty_insert_flip_string_fixed_flag(struct tty_port *port, +int tty_insert_flip_string_fixed_flag(struct tty_port *port, const unsigned char *chars, char flag, size_t size); -extern int tty_prepare_flip_string(struct tty_port *port, - unsigned char **chars, size_t size); -extern void tty_flip_buffer_push(struct tty_port *port); +int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars, + size_t size); +void tty_flip_buffer_push(struct tty_port *port); void tty_schedule_flip(struct tty_port *port); int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag); @@ -45,7 +45,7 @@ static inline int tty_insert_flip_string(struct tty_port *port, int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, const char *f, int count); -extern void tty_buffer_lock_exclusive(struct tty_port *port); -extern void tty_buffer_unlock_exclusive(struct tty_port *port); +void tty_buffer_lock_exclusive(struct tty_port *port); +void tty_buffer_unlock_exclusive(struct tty_port *port); #endif /* _LINUX_TTY_FLIP_H */ diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index b1d812e902aa..b85d84fb5f49 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -146,7 +146,7 @@ struct ld_semaphore { #endif }; -extern void __init_ldsem(struct ld_semaphore *sem, const char *name, +void __init_ldsem(struct ld_semaphore *sem, const char *name, struct lock_class_key *key); #define init_ldsem(sem) \ @@ -157,18 +157,18 @@ do { \ } while (0) -extern int ldsem_down_read(struct ld_semaphore *sem, long timeout); -extern int ldsem_down_read_trylock(struct ld_semaphore *sem); -extern int ldsem_down_write(struct ld_semaphore *sem, long timeout); -extern int ldsem_down_write_trylock(struct ld_semaphore *sem); -extern void ldsem_up_read(struct ld_semaphore *sem); -extern void ldsem_up_write(struct ld_semaphore *sem); +int ldsem_down_read(struct ld_semaphore *sem, long timeout); +int ldsem_down_read_trylock(struct ld_semaphore *sem); +int ldsem_down_write(struct ld_semaphore *sem, long timeout); +int ldsem_down_write_trylock(struct ld_semaphore *sem); +void ldsem_up_read(struct ld_semaphore *sem); +void ldsem_up_write(struct ld_semaphore *sem); #ifdef CONFIG_DEBUG_LOCK_ALLOC -extern int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass, - long timeout); -extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, - long timeout); +int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass, + long timeout); +int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, + long timeout); #else # define ldsem_down_read_nested(sem, subclass, timeout) \ ldsem_down_read(sem, timeout) @@ -180,7 +180,6 @@ extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, struct tty_ldisc_ops { char *name; int num; - int flags; /* * The following routines are called from above. @@ -200,7 +199,7 @@ struct tty_ldisc_ops { void (*set_termios)(struct tty_struct *tty, struct ktermios *old); __poll_t (*poll)(struct tty_struct *, struct file *, struct poll_table_struct *); - int (*hangup)(struct tty_struct *tty); + void (*hangup)(struct tty_struct *tty); /* * The following routines are called from below. @@ -220,8 +219,6 @@ struct tty_ldisc { struct tty_struct *tty; }; -#define LDISC_FLAG_DEFINED 0x00000001 - #define MODULE_ALIAS_LDISC(ldisc) \ MODULE_ALIAS("tty-ldisc-" __stringify(ldisc)) diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c index 57500c262cc3..c027c76d493c 100644 --- a/net/nfc/nci/uart.c +++ b/net/nfc/nci/uart.c @@ -337,7 +337,7 @@ static int nci_uart_tty_ioctl(struct tty_struct *tty, struct file *file, return -EBUSY; break; default: - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; } diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 13258f3ca9aa..1af0bf5f1e2f 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -252,10 +252,9 @@ static void v253_close(struct tty_struct *tty) } /* Line discipline .hangup() */ -static int v253_hangup(struct tty_struct *tty) +static void v253_hangup(struct tty_struct *tty) { v253_close(tty); - return 0; } /* Line discipline .receive_buf() */ diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c index ecd24d412a9b..b1a32545babd 100644 --- a/sound/soc/ti/ams-delta.c +++ b/sound/soc/ti/ams-delta.c @@ -330,10 +330,9 @@ static void cx81801_close(struct tty_struct *tty) } /* Line discipline .hangup() */ -static int cx81801_hangup(struct tty_struct *tty) +static void cx81801_hangup(struct tty_struct *tty) { cx81801_close(tty); - return 0; } /* Line discipline .receive_buf() */ |