staging: winbond: remove driver

The driver hasn't been cleaned up and nobody is working to do so, so
remove it.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

29 files changed, 0 insertions, 8758 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 1a3564dddcb7..4c7cff443a5e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8631,11 +8631,6 @@ M:	Forest Bond <forest@alittletooquiet.net>
 S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
-STAGING - WINBOND IS89C35 WLAN USB DRIVER
-M:	Pavel Machek <pavel@ucw.cz>
-S:	Odd Fixes
-F:	drivers/staging/winbond/
-
 STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
 M:	Arnaud Patard <arnaud.patard@rtp-net.org>
 S:	Odd Fixes
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 52d7e8b63347..c7e34a28c6f1 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -30,8 +30,6 @@ source "drivers/staging/slicoss/Kconfig"
 
 source "drivers/staging/usbip/Kconfig"
 
-source "drivers/staging/winbond/Kconfig"
-
 source "drivers/staging/wlan-ng/Kconfig"
 
 source "drivers/staging/comedi/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 1b9e10c639e3..8ad1689da19d 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -7,7 +7,6 @@ obj-y				+= media/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
-obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig
deleted file mode 100644
index db5b053d9bc2..000000000000
--- a/drivers/staging/winbond/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-config W35UND
-	tristate "IS89C35 WLAN USB driver"
-	depends on MAC80211 && WLAN && USB
-	default n
-	---help---
-	  This is highly experimental driver for Winbond WIFI card.
-
-	  Hardware is present in some Kohjinsha subnotebooks, and in some
-	  stand-alone USB modules. Chipset name seems to be w89c35d.
-
-	  Check <http://code.google.com/p/winbondport/> for new version.
diff --git a/drivers/staging/winbond/Makefile b/drivers/staging/winbond/Makefile
deleted file mode 100644
index 081d48db04cb..000000000000
--- a/drivers/staging/winbond/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-w35und-y :=			\
-	mds.o			\
-	mto.o			\
-	phy_calibration.o	\
-	reg.o			\
-	wb35reg.o		\
-	wb35rx.o		\
-	wb35tx.o		\
-	wbusb.o			\
-
-
-obj-$(CONFIG_W35UND) += w35und.o
-
-
-
diff --git a/drivers/staging/winbond/TODO b/drivers/staging/winbond/TODO
deleted file mode 100644
index b4c592a96844..000000000000
--- a/drivers/staging/winbond/TODO
+++ /dev/null
@@ -1,12 +0,0 @@
-TODO:
-	- sparse cleanups
-	- checkpatch cleanups
-	- kerneldoc cleanups
-	- fix severeCamelCaseInfestation
-	- remove unused ioctls
-	- use cfg80211 for regulatory stuff
-	- fix 4k stack problems
-	- fix locking problems (it's done using atomics...)
-
-Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
-Pavel Machek <pavel@ucw.cz>
diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h
deleted file mode 100644
index fc0ef24fad3b..000000000000
--- a/drivers/staging/winbond/core.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef __WINBOND_CORE_H
-#define __WINBOND_CORE_H
-
-#include <linux/wireless.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-
-#include "wbhal.h"
-#include "mto.h"
-
-#include "mac_structures.h"
-#include "mds_s.h"
-
-#define MAX_NUM_TX_MMPDU		2
-#define MAX_MMPDU_SIZE			1512
-#define MAX_NUM_RX_MMPDU		6
-
-struct mlme_frame {
-	s8		*pMMPDU;
-	u16		len;
-	u8		data_type;
-	u8		is_in_used;
-
-	u8		TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE];
-	u8		TxMMPDUInUse[(MAX_NUM_TX_MMPDU + 3) & ~0x03];
-
-	u16		wNumTxMMPDU;
-	u16		wNumTxMMPDUDiscarded;
-
-	u8		RxMMPDU[MAX_NUM_RX_MMPDU][MAX_MMPDU_SIZE];
-	u8		SaveRxBufSlotInUse[(MAX_NUM_RX_MMPDU + 3) & ~0x03];
-
-	u16		wNumRxMMPDU;
-	u16		wNumRxMMPDUDiscarded;
-
-	u16		wNumRxMMPDUInMLME;	/* Number of the Rx MMPDU */
-	u16		reserved_1;		/*  in MLME. */
-						/*  excluding the discarded */
-};
-
-#define WBLINUX_PACKET_ARRAY_SIZE (ETHERNET_TX_DESCRIPTORS*4)
-
-#define WB_MAX_LINK_NAME_LEN 40
-
-struct wbsoft_priv {
-	struct wb_local_para sLocalPara;	/* Myself connected
-							parameters */
-
-	struct mlme_frame sMlmeFrame;	/* connect to peerSTA parameters */
-
-	struct wb35_mto_params sMtoPara;	/* MTO_struct ... */
-	struct hw_data sHwData;	/*For HAL */
-	struct wb35_mds Mds;
-
-	u32 RxByteCount;
-	u32 TxByteCount;
-
-	bool enabled;
-};
-
-#endif /* __WINBOND_CORE_H */
diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h
deleted file mode 100644
index 8ca80ddda59a..000000000000
--- a/drivers/staging/winbond/localpara.h
+++ /dev/null
@@ -1,311 +0,0 @@
-#ifndef __WINBOND_LOCALPARA_H
-#define __WINBOND_LOCALPARA_H
-
-/*
- * =============================================================
- * LocalPara.h -
- * =============================================================
- */
-
-#include "mac_structures.h"
-
-/* Define the local ability */
-
-#define LOCAL_DEFAULT_BEACON_PERIOD	100	/* ms */
-#define LOCAL_DEFAULT_ATIM_WINDOW	0
-#define LOCAL_DEFAULT_ERP_CAPABILITY	0x0431	/*
-						 * 0x0001: ESS
-						 * 0x0010: Privacy
-						 * 0x0020: short preamble
-						 * 0x0400: short slot time
-						 */
-#define LOCAL_DEFAULT_LISTEN_INTERVAL	5
-
-#define LOCAL_DEFAULT_24_CHANNEL_NUM	13	/* channel 1..13 */
-#define LOCAL_DEFAULT_5_CHANNEL_NUM	8	/* channel 36..64 */
-
-#define LOCAL_USA_24_CHANNEL_NUM	11
-#define LOCAL_USA_5_CHANNEL_NUM		12
-#define LOCAL_EUROPE_24_CHANNEL_NUM	13
-#define LOCAL_EUROPE_5_CHANNEL_NUM	19
-#define LOCAL_JAPAN_24_CHANNEL_NUM	14
-#define LOCAL_JAPAN_5_CHANNEL_NUM	11
-#define LOCAL_UNKNOWN_24_CHANNEL_NUM	14
-#define LOCAL_UNKNOWN_5_CHANNEL_NUM	34	/* not include 165 */
-
-#define psLOCAL				(&(adapter->sLocalPara))
-
-#define MODE_802_11_BG			0
-#define MODE_802_11_A			1
-#define MODE_802_11_ABG			2
-#define MODE_802_11_BG_IBSS		3
-#define MODE_802_11_B			4
-#define MODE_AUTO			255
-
-#define BAND_TYPE_DSSS			0
-#define BAND_TYPE_OFDM_24		1
-#define BAND_TYPE_OFDM_5		2
-
-/* refer Bitmap2RateValue table */
-
-/* the bitmap value of all the H/W supported rates: */
-/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
-#define LOCAL_ALL_SUPPORTED_RATES_BITMAP	0x130c1a66
-/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */
-/* 6, 9, 12, 18, 24, 36, 48, 54 */
-#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP	0x130c1240
-#define LOCAL_11B_SUPPORTED_RATE_BITMAP		0x826
-#define LOCAL_11B_BASIC_RATE_BITMAP		0x826
-#define LOCAL_11B_OPERATION_RATE_BITMAP		0x826
-#define LOCAL_11G_BASIC_RATE_BITMAP		0x826	   /* 1, 2, 5.5, 11 */
-#define LOCAL_11G_OPERATION_RATE_BITMAP		0x130c1240 /* 6, 9, 12, 18,
-								    * 24, 36, 48, 54
-								    */
-#define LOCAL_11A_BASIC_RATE_BITMAP		0x01001040 /* 6, 12, 24 */
-#define LOCAL_11A_OPERATION_RATE_BITMAP		0x120c0200 /* 9, 18, 36,
-								    * 48, 54
-								    */
-
-
-#define PWR_ACTIVE				0
-#define PWR_SAVE				1
-#define PWR_TX_IDLE_CYCLE			6
-
-/* bPreambleMode and bSlotTimeMode */
-#define AUTO_MODE				0
-#define LONG_MODE				1
-
-/* Region definition */
-#define REGION_AUTO				0xff
-#define REGION_UNKNOWN				0
-#define REGION_EUROPE				1	/* ETSI */
-#define REGION_JAPAN				2	/* MKK */
-#define REGION_USA				3	/* FCC */
-#define	REGION_FRANCE				4	/* FRANCE */
-#define REGION_SPAIN				5	/* SPAIN */
-#define REGION_ISRAEL				6	/* ISRAEL */
-
-#define MAX_BSS_DESCRIPT_ELEMENT		32
-#define MAX_PMKID_CandidateList			16
-
-/*
- * High byte : Event number,  low byte : reason
- * Event definition
- * -- SME/MLME event
- */
-#define EVENT_RCV_DEAUTH			0x0100
-#define EVENT_JOIN_FAIL				0x0200
-#define EVENT_AUTH_FAIL				0x0300
-#define EVENT_ASSOC_FAIL			0x0400
-#define EVENT_LOST_SIGNAL			0x0500
-#define EVENT_BSS_DESCRIPT_LACK			0x0600
-#define EVENT_COUNTERMEASURE			0x0700
-#define EVENT_JOIN_FILTER			0x0800
-/* -- TX/RX event */
-#define EVENT_RX_BUFF_UNAVAILABLE		0x4100
-
-#define EVENT_CONNECT				0x8100
-#define EVENT_DISCONNECT			0x8200
-#define EVENT_SCAN_REQ				0x8300
-
-/* Reason of Event */
-#define EVENT_REASON_FILTER_BASIC_RATE		0x0001
-#define EVENT_REASON_FILTER_PRIVACY		0x0002
-#define EVENT_REASON_FILTER_AUTH_MODE		0x0003
-#define EVENT_REASON_TIMEOUT			0x00ff
-
-/* Due to[E id][Length][OUI][Data] may be 257 bytes */
-#define MAX_IE_APPEND_SIZE			(256 + 4)
-
-struct chan_info {
-	u8	band;
-	u8	ChanNo;
-};
-
-struct radio_off {
-	u8	boHwRadioOff;
-	u8	boSwRadioOff;
-};
-
-struct wb_local_para {
-	/* read from EPROM, manufacture set for each NetCard */
-	u8	PermanentAddress[MAC_ADDR_LENGTH + 2];
-	/* the driver will use this one actually. */
-	u8	ThisMacAddress[MAC_ADDR_LENGTH + 2];
-	u32	MTUsize;	/* Ind to Uplayer, Max transmission unit size */
-	u8	region_INF;	/* region setting from INF */
-	u8	region;		/* real region setting of the device */
-	u8	Reserved_1[2];
-
-	/* power-save variables */
-	u8	iPowerSaveMode; /* 0 indicates on, 1 indicates off */
-	u8	ATIMmode;
-	u8	ExcludeUnencrypted;
-	/* Unit time count for the decision to enter PS mode */
-	u16	CheckCountForPS;
-	u8	boHasTxActivity;/* tx activity has occurred */
-	u8	boMacPsValid;	/* Power save mode obtained
-				 * from H/W is valid or not
-				 */
-
-	/* Rate */
-	u8	TxRateMode; /*
-			     * Initial, input from Registry,
-			     * may be updated by GUI
-			     * Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
-			     */
-	u8	CurrentTxRate;		/* The current Tx rate */
-	u8	CurrentTxRateForMng;	/*
-					 * The current Tx rate for management
-					 * frames. It will be decided before
-					 * connection succeeds.
-					 */
-	u8	CurrentTxFallbackRate;
-
-	/* for Rate handler */
-	u8	BRateSet[32];		/* basic rate set */
-	u8	SRateSet[32];		/* support rate set */
-
-	u8	NumOfBRate;
-	u8	NumOfSRate;
-	u8	NumOfDsssRateInSRate;	/* number of DSSS rates in
-					 * supported rate set
-					 */
-	u8	reserved1;
-
-	u32	dwBasicRateBitmap;	/* bit map of basic rates */
-
-	u32	dwSupportRateBitmap;	/* bit map of all support rates
-					 * including basic and operational
-					 * rates
-					 */
-
-
-	/* For SME/MLME handler */
-
-	u16	wOldSTAindex;		/* valid when boHandover=TRUE,
-					 * store old connected STA index
-					 */
-	u16	wConnectedSTAindex;	/* Index of peerly connected AP or
-					 * IBSS in the descriptionset.
-					 */
-	u16	Association_ID;		/* The Association ID in the
-					 * (Re)Association Response frame.
-					 */
-	u16	ListenInterval;		/* The listen interval when SME invoking
-					 * MLME_ (Re)Associate_Request().
-					 */
-
-	struct	radio_off RadioOffStatus;
-	u8	Reserved0[2];
-	u8	boMsRadioOff;		/* Ndis demands to be true when set
-					 * Disassoc. OID and be false when
-					 * set SSID OID.
-					 */
-	u8	bAntennaNo;		/* which antenna */
-	u8	bConnectFlag;		/* the connect status flag for
-					 * roaming task
-					 */
-
-	u8	RoamStatus;
-	u8	reserved7[3];
-
-	struct	chan_info CurrentChan;	/* Current channel no. and channel band.
-					 * It may be changed by scanning.
-					 */
-	u8	boHandover;		/* Roaming, Handover to other AP. */
-	u8	boCCAbusy;
-
-	u16	CWMax;			/* It may not be the real value
-					 * that H/W used
-					 */
-	u8	CWMin;			/* 255: set according to 802.11 spec. */
-	u8	reserved2;
-
-	/* 11G: */
-	u8	bMacOperationMode;	/* operation in 802.11b or 802.11g */
-	u8	bSlotTimeMode;		/* AUTO, s32 */
-	u8	bPreambleMode;		/* AUTO, s32 */
-	u8	boNonERPpresent;
-
-	u8	boProtectMechanism;	/* H/W will take the necessary action
-					 * based on this variable
-					 */
-	u8	boShortPreamble;	/* Same here */
-	u8	boShortSlotTime;	/* Same here */
-	u8	reserved_3;
-
-	u32	RSN_IE_Bitmap;
-	u32	RSN_OUI_Type;
-
-	/* For the BSSID */
-	u8	HwBssid[MAC_ADDR_LENGTH + 2];
-	u32	HwBssidValid;
-
-	/* For scan list */
-	u8	BssListCount;		/* Total count of valid
-					 * descriptor indexes
-					 */
-	u8	boReceiveUncorrectInfo;	/* important settings in beacon/probe
-					 * resp. have been changed
-					 */
-	u8	NoOfJoinerInIbss;
-	u8	reserved_4;
-
-	/* Store the valid descriptor indexes obtained from scannings */
-	u8	BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
-	/*
-	 * Save the BssDescriptor index in this IBSS.
-	 * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex).
-	 * If CONNECTED : NoOfJoinerInIbss >= 2
-	 * else		: NoOfJoinerInIbss <= 1
-	 */
-	u8	JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
-
-	/* General Statistics, count at Rx_handler or
-	 * Tx_callback interrupt handler
-	 */
-	u64	GS_XMIT_OK;		/* Good Frames Transmitted */
-	u64	GS_RCV_OK;		/* Good Frames Received */
-	u32	GS_RCV_ERROR;		/* Frames received with crc error */
-	u32	GS_XMIT_ERROR;		/* Bad Frames Transmitted */
-	u32	GS_RCV_NO_BUFFER;	/* Receive Buffer underrun */
-	u32	GS_XMIT_ONE_COLLISION;	/* one collision */
-	u32	GS_XMIT_MORE_COLLISIONS;/* more collisions */
-
-	/*
-	 * ================================================================
-	 * Statistics (no matter whether it had done successfully) -wkchen
-	 * ================================================================
-	 */
-	u32	_NumRxMSDU;
-	u32	_NumTxMSDU;
-	u32	_dot11WEPExcludedCount;
-	u32	_dot11WEPUndecryptableCount;
-	u32	_dot11FrameDuplicateCount;
-
-	struct	chan_info IbssChanSetting;	/* 2B. Start IBSS Channel
-						 * setting by registry or
-						 * WWU.
-						 */
-	u8	reserved_5[2];		/* It may not be used after
-					 * considering RF type, region
-					 * and modulation type.
-					 */
-
-	u8	reserved_6[2];		/* two variables are for wep
-					 * key error detection
-					 */
-	u32	bWepKeyError;
-	u32	bToSelfPacketReceived;
-	u32	WepKeyDetectTimerCount;
-
-	u16	SignalLostTh;
-	u16	SignalRoamTh;
-
-	u8		IE_Append_data[MAX_IE_APPEND_SIZE];
-	u16		IE_Append_size;
-	u16		reserved_7;
-};
-
-#endif
diff --git a/drivers/staging/winbond/mac_structures.h b/drivers/staging/winbond/mac_structures.h
deleted file mode 100644
index 76c63c74d50c..000000000000
--- a/drivers/staging/winbond/mac_structures.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-// MAC_Structures.h
-//
-// This file contains the definitions and data structures used by SW-MAC.
-//
-// Revision Histoy
-//=================
-// 0.1      2002        UN00
-// 0.2      20021004    PD43 CCLiu6
-//          20021018    PD43 CCLiu6
-//                      Add enum_TxRate type
-//                      Modify enum_STAState type
-// 0.3      20021023    PE23 CYLiu update MAC session struct
-//          20021108
-//          20021122    PD43 Austin
-//                      Deleted some unused.
-//          20021129    PD43 Austin
-//			20030617	increase the 802.11g definition
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-
-#ifndef _MAC_Structures_H_
-#define _MAC_Structures_H_
-
-#define MAC_ADDR_LENGTH                     6
-
-/* ========================================================
-// 802.11 Frame define
-//----- */
-#define DOT_11_MAC_HEADER_SIZE		24
-#define DOT_11_SNAP_SIZE			6
-#define DOT_11_DURATION_OFFSET		2
-/* Sequence control offset */
-#define DOT_11_SEQUENCE_OFFSET		22
-/* The start offset of 802.11 Frame// */
-#define DOT_11_TYPE_OFFSET			30
-#define DOT_11_DATA_OFFSET          24
-#define DOT_11_DA_OFFSET			4
-
-#define MAX_ETHERNET_PACKET_SIZE		1514
-
-/* -----  management : Type of Bits (2, 3) and Subtype of Bits (4, 5, 6, 7) */
-#define MAC_SUBTYPE_MNGMNT_ASSOC_REQUEST    0x00
-#define MAC_SUBTYPE_MNGMNT_ASSOC_RESPONSE   0x10
-#define MAC_SUBTYPE_MNGMNT_REASSOC_REQUEST  0x20
-#define MAC_SUBTYPE_MNGMNT_REASSOC_RESPONSE 0x30
-#define MAC_SUBTYPE_MNGMNT_PROBE_REQUEST    0x40
-#define MAC_SUBTYPE_MNGMNT_PROBE_RESPONSE   0x50
-#define MAC_SUBTYPE_MNGMNT_BEACON           0x80
-#define MAC_SUBTYPE_MNGMNT_ATIM             0x90
-#define MAC_SUBTYPE_MNGMNT_DISASSOCIATION   0xA0
-#define MAC_SUBTYPE_MNGMNT_AUTHENTICATION   0xB0
-#define MAC_SUBTYPE_MNGMNT_DEAUTHENTICATION 0xC0
-
-#define RATE_AUTO					0
-#define RATE_1M						2
-#define RATE_2M						4
-#define RATE_5dot5M					11
-#define RATE_6M						12
-#define RATE_9M						18
-#define RATE_11M					22
-#define RATE_12M					24
-#define RATE_18M					36
-#define RATE_22M					44
-#define RATE_24M					48
-#define RATE_33M					66
-#define RATE_36M					72
-#define RATE_48M					96
-#define RATE_54M					108
-#define RATE_MAX					255
-
-#endif /* _MAC_Structure_H_ */
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
deleted file mode 100644
index aef0855f4c68..000000000000
--- a/drivers/staging/winbond/mds.c
+++ /dev/null
@@ -1,650 +0,0 @@
-#include "mds_f.h"
-#include "mto.h"
-#include "wbhal.h"
-#include "wb35tx_f.h"
-
-unsigned char
-Mds_initial(struct wbsoft_priv *adapter)
-{
-	struct wb35_mds *pMds = &adapter->Mds;
-
-	pMds->TxPause = false;
-	pMds->TxRTSThreshold = DEFAULT_RTSThreshold;
-	pMds->TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-
-	return hal_get_tx_buffer(&adapter->sHwData, &pMds->pTxBuffer);
-}
-
-static void Mds_DurationSet(struct wbsoft_priv *adapter,
-			    struct wb35_descriptor *pDes, u8 *buffer)
-{
-	struct T00_descriptor *pT00;
-	struct T01_descriptor *pT01;
-	u16	Duration, NextBodyLen, OffsetSize;
-	u8	Rate, i;
-	unsigned char	CTS_on = false, RTS_on = false;
-	struct T00_descriptor *pNextT00;
-	u16 BodyLen = 0;
-	unsigned char boGroupAddr = false;
-
-	OffsetSize = pDes->FragmentThreshold + 32 + 3;
-	OffsetSize &= ~0x03;
-	Rate = pDes->TxRate >> 1;
-	if (!Rate)
-		Rate = 1;
-
-	pT00 = (struct T00_descriptor *)buffer;
-	pT01 = (struct T01_descriptor *)(buffer+4);
-	pNextT00 = (struct T00_descriptor *)(buffer+OffsetSize);
-
-	if (buffer[DOT_11_DA_OFFSET+8] & 0x1) /* +8 for USB hdr */
-		boGroupAddr = true;
-
-	/******************************************
-	 * Set RTS/CTS mechanism
-	 ******************************************/
-	if (!boGroupAddr) {
-		/* NOTE : If the protection mode is enabled and the MSDU will
-		 *	  be fragmented, the tx rates of MPDUs will all be DSSS
-		 *	  rates. So it will not use CTS-to-self in this case.
-		 *	  CTS-To-self will only be used when without
-		 *	  fragmentation. -- 20050112 */
-		BodyLen = (u16)pT00->T00_frame_length;	/* include 802.11 header */
-		BodyLen += 4;	/* CRC */
-
-		if (BodyLen >= CURRENT_RTS_THRESHOLD)
-			RTS_on = true; /* Using RTS */
-		else {
-			if (pT01->T01_modulation_type) { /* Is using OFDM */
-				/* Is using protect */
-				if (CURRENT_PROTECT_MECHANISM)
-					CTS_on = true; /* Using CTS */
-			}
-		}
-	}
-
-	if (RTS_on || CTS_on) {
-		if (pT01->T01_modulation_type) { /* Is using OFDM */
-			/* CTS duration
-			 *  2 SIFS + DATA transmit time + 1 ACK
-			 *  ACK Rate : 24 Mega bps
-			 *  ACK frame length = 14 bytes */
-			Duration = 2*DEFAULT_SIFSTIME +
-				2*PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION +
-				((BodyLen*8 + 22 + Rate*4 - 1)/(Rate*4))*Tsym +
-				((112 + 22 + 95)/96)*Tsym;
-		} else	{ /* DSSS */
-			/* CTS duration
-			 *  2 SIFS + DATA transmit time + 1 ACK
-			 *  Rate : ?? Mega bps
-			 *  ACK frame length = 14 bytes */
-			if (pT01->T01_plcp_header_length) /* long preamble */
-				Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME*2;
-			else
-				Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME*2;
-
-			Duration += (((BodyLen + 14)*8 + Rate-1) / Rate +
-						DEFAULT_SIFSTIME*2);
-		}
-
-		if (RTS_on) {
-			if (pT01->T01_modulation_type) { /* Is using OFDM */
-				/* CTS + 1 SIFS + CTS duration
-				 * CTS Rate : 24 Mega bps
-				 * CTS frame length = 14 bytes */
-				Duration += (DEFAULT_SIFSTIME +
-					PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION +
-					((112 + 22 + 95)/96)*Tsym);
-			} else {
-				/* CTS + 1 SIFS + CTS duration
-				 * CTS Rate : ?? Mega bps
-				 * CTS frame length = 14 bytes
-				 */
-				/* long preamble */
-				if (pT01->T01_plcp_header_length)
-					Duration += LONG_PREAMBLE_PLUS_PLCPHEADER_TIME;
-				else
-					Duration += SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME;
-
-				Duration += (((112 + Rate-1) / Rate) +
-					     DEFAULT_SIFSTIME);
-			}
-		}
-
-		/* Set the value into USB descriptor */
-		pT01->T01_add_rts = RTS_on ? 1 : 0;
-		pT01->T01_add_cts = CTS_on ? 1 : 0;
-		pT01->T01_rts_cts_duration = Duration;
-	}
-
-	/******************************************
-	 * Fill the more fragment descriptor
-	 ******************************************/
-	if (boGroupAddr)
-		Duration = 0;
-	else {
-		for (i = pDes->FragmentCount-1; i > 0; i--) {
-			NextBodyLen = (u16)pNextT00->T00_frame_length;
-			NextBodyLen += 4;	/* CRC */
-
-			if (pT01->T01_modulation_type) {
-				/* OFDM
-				 *  data transmit time + 3 SIFS + 2 ACK
-				 *  Rate : ??Mega bps
-				 *  ACK frame length = 14 bytes, tx rate = 24M */
-				Duration = PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION * 3;
-				Duration += (((NextBodyLen*8 + 22 + Rate*4 - 1)
-					     /(Rate*4)) * Tsym +
-					     (((2*14)*8 + 22 + 95)/96)*Tsym +
-					    DEFAULT_SIFSTIME*3);
-			} else {
-				/* DSSS
-				 *  data transmit time + 2 ACK + 3 SIFS
-				 *  Rate : ??Mega bps
-				 *  ACK frame length = 14 bytes
-				 * TODO : */
-				if (pT01->T01_plcp_header_length) /* long preamble */
-					Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME*3;
-				else
-					Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME*3;
-
-				Duration += (((NextBodyLen + (2*14))*8
-					     + Rate-1) / Rate +
-					    DEFAULT_SIFSTIME*3);
-			}
-			/* 4 USHOR for skip 8B USB, 2USHORT=FC + Duration */
-			((u16 *)buffer)[5] = cpu_to_le16(Duration);
-
-			/* ----20061009 add by anson's endian */
-			pNextT00->value = cpu_to_le32(pNextT00->value);
-			pT01->value = cpu_to_le32(pT01->value);
-			/* ----end 20061009 add by anson's endian */
-
-			buffer += OffsetSize;
-			pT01 = (struct T01_descriptor *)(buffer+4);
-			/* The last fragment will not have the next fragment */
-			if (i != 1)
-				pNextT00 = (struct T00_descriptor *)(buffer+OffsetSize);
-		}
-
-		/*******************************************
-		 * Fill the last fragment descriptor
-		 *******************************************/
-		if (pT01->T01_modulation_type) {
-			/* OFDM
-			 *  1 SIFS + 1 ACK
-			 *  Rate : 24 Mega bps
-			 * ACK frame length = 14 bytes */
-			Duration = PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION;
-			/* The Tx rate of ACK use 24M */
-			Duration += (((112 + 22 + 95)/96)*Tsym +
-				    DEFAULT_SIFSTIME);
-		} else {
-			/* DSSS
-			 * 1 ACK + 1 SIFS
-			 * Rate : ?? Mega bps
-			 * ACK frame length = 14 bytes(112 bits) */
-			if (pT01->T01_plcp_header_length) /* long preamble */
-				Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME;
-			else
-				Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME;
-
-			Duration += ((112 + Rate-1)/Rate + DEFAULT_SIFSTIME);
-		}
-	}
-
-	/* 4 USHOR for skip 8B USB, 2USHORT=FC + Duration */
-	((u16 *)buffer)[5] = cpu_to_le16(Duration);
-	pT00->value = cpu_to_le32(pT00->value);
-	pT01->value = cpu_to_le32(pT01->value);
-	/* --end 20061009 add */
-
-}
-
-/* The function return the 4n size of usb pk */
-static u16 Mds_BodyCopy(struct wbsoft_priv *adapter,
-			struct wb35_descriptor *pDes, u8 *TargetBuffer)
-{
-	struct T00_descriptor *pT00;
-	struct wb35_mds *pMds = &adapter->Mds;
-	u8	*buffer;
-	u8	*src_buffer;
-	u8	*pctmp;
-	u16	Size = 0;
-	u16	SizeLeft, CopySize, CopyLeft, stmp;
-	u8	buf_index, FragmentCount = 0;
-
-
-	/* Copy fragment body */
-	buffer = TargetBuffer; /* shift 8B usb + 24B 802.11 */
-	SizeLeft = pDes->buffer_total_size;
-	buf_index = pDes->buffer_start_index;
-
-	pT00 = (struct T00_descriptor *)buffer;
-	while (SizeLeft) {
-		pT00 = (struct T00_descriptor *)buffer;
-		CopySize = SizeLeft;
-		if (SizeLeft > pDes->FragmentThreshold) {
-			CopySize = pDes->FragmentThreshold;
-			/* Set USB length */
-			pT00->T00_frame_length = 24 + CopySize;
-		} else  /* Set USB length */
-			pT00->T00_frame_length = 24 + SizeLeft;
-
-		SizeLeft -= CopySize;
-
-		/* 1 Byte operation */
-		pctmp = (u8 *)(buffer + 8 + DOT_11_SEQUENCE_OFFSET);
-		*pctmp &= 0xf0;
-		*pctmp |= FragmentCount; /* 931130.5.m */
-		if (!FragmentCount)
-			pT00->T00_first_mpdu = 1;
-
-		buffer += 32; /* 8B usb + 24B 802.11 header */
-		Size += 32;
-
-		/* Copy into buffer */
-		stmp = CopySize + 3;
-		stmp &= ~0x03; /* 4n Alignment */
-		Size += stmp; /* Current 4n offset of mpdu */
-
-		while (CopySize) {
-			/* Copy body */
-			src_buffer = pDes->buffer_address[buf_index];
-			CopyLeft = CopySize;
-			if (CopySize >= pDes->buffer_size[buf_index]) {
-				CopyLeft = pDes->buffer_size[buf_index];
-
-				/* Get the next buffer of descriptor */
-				buf_index++;
-				buf_index %= MAX_DESCRIPTOR_BUFFER_INDEX;
-			} else {
-				u8 *pctmp = pDes->buffer_address[buf_index];
-				pctmp += CopySize;
-				pDes->buffer_address[buf_index] = pctmp;
-				pDes->buffer_size[buf_index] -= CopySize;
-			}
-
-			memcpy(buffer, src_buffer, CopyLeft);
-			buffer += CopyLeft;
-			CopySize -= CopyLeft;
-		}
-
-		/* 931130.5.n */
-		if (pMds->MicAdd) {
-			if (!SizeLeft) {
-				pMds->MicWriteAddress[pMds->MicWriteIndex] =
-					buffer - pMds->MicAdd;
-				pMds->MicWriteSize[pMds->MicWriteIndex] =
-					pMds->MicAdd;
-				pMds->MicAdd = 0;
-			} else if (SizeLeft < 8) { /* 931130.5.p */
-				pMds->MicAdd = SizeLeft;
-				pMds->MicWriteAddress[pMds->MicWriteIndex] =
-					buffer - (8 - SizeLeft);
-				pMds->MicWriteSize[pMds->MicWriteIndex] =
-					8 - SizeLeft;
-				pMds->MicWriteIndex++;
-			}
-		}
-
-		/* Does it need to generate the new header for next mpdu? */
-		if (SizeLeft) {
-			/* Get the next 4n start address */
-			buffer = TargetBuffer + Size;
-			/* Copy 8B USB +24B 802.11 */
-			memcpy(buffer, TargetBuffer, 32);
-			pT00 = (struct T00_descriptor *)buffer;
-			pT00->T00_first_mpdu = 0;
-		}
-
-		FragmentCount++;
-	}
-
-	pT00->T00_last_mpdu = 1;
-	pT00->T00_IsLastMpdu = 1;
-	buffer = (u8 *)pT00 + 8; /* +8 for USB hdr */
-	buffer[1] &= ~0x04; /* Clear more frag bit of 802.11 frame control */
-	/* Update the correct fragment number */
-	pDes->FragmentCount = FragmentCount;
-	return Size;
-}
-
-static void Mds_HeaderCopy(struct wbsoft_priv *adapter,
-			   struct wb35_descriptor *pDes, u8 *TargetBuffer)
-{
-	struct wb35_mds *pMds = &adapter->Mds;
-	u8	*src_buffer = pDes->buffer_address[0]; /* 931130.5.g */
-	struct T00_descriptor *pT00;
-	struct T01_descriptor *pT01;
-	u16	stmp;
-	u8	i, ctmp1, ctmp2, ctmpf;
-	u16	FragmentThreshold = CURRENT_FRAGMENT_THRESHOLD;
-
-
-	stmp = pDes->buffer_total_size;
-	/*
-	 * Set USB header 8 byte
-	 */
-	pT00 = (struct T00_descriptor *)TargetBuffer;
-	TargetBuffer += 4;
-	pT01 = (struct T01_descriptor *)TargetBuffer;
-	TargetBuffer += 4;
-
-	pT00->value = 0; /* Clear */
-	pT01->value = 0; /* Clear */
-
-	pT00->T00_tx_packet_id = pDes->Descriptor_ID; /* Set packet ID */
-	pT00->T00_header_length = 24; /* Set header length */
-	pT01->T01_retry_abort_enable = 1; /* 921013 931130.5.h */
-
-	/* Key ID setup */
-	pT01->T01_wep_id = 0;
-
-	FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;	/* Do not fragment */
-	/* Copy full data, the 1'st buffer contain all the data 931130.5.j */
-	/* Copy header */
-	memcpy(TargetBuffer, src_buffer, DOT_11_MAC_HEADER_SIZE);
-	pDes->buffer_address[0] = src_buffer + DOT_11_MAC_HEADER_SIZE;
-	pDes->buffer_total_size -= DOT_11_MAC_HEADER_SIZE;
-	pDes->buffer_size[0] = pDes->buffer_total_size;
-
-	/* Set fragment threshold */
-	FragmentThreshold -= (DOT_11_MAC_HEADER_SIZE + 4);
-	pDes->FragmentThreshold = FragmentThreshold;
-
-	/* Set more frag bit */
-	TargetBuffer[1] |= 0x04; /* Set more frag bit */
-
-	/*
-	 * Set tx rate
-	 */
-	stmp = *(u16 *)(TargetBuffer+30); /* 2n alignment address */
-
-	/* Use basic rate */
-	ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG;
-
-	pDes->TxRate = ctmp1;
-	pr_debug("Tx rate =%x\n", ctmp1);
-
-	pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
-
-	for (i = 0; i < 2; i++) {
-		if (i == 1)
-			ctmp1 = ctmpf;
-		/* backup the ta rate and fall back rate */
-		pMds->TxRate[pDes->Descriptor_ID][i] = ctmp1;
-
-		if (ctmp1 == 108)
-			ctmp2 = 7;
-		else if (ctmp1 == 96)
-			ctmp2 = 6; /* Rate convert for USB */
-		else if (ctmp1 == 72)
-			ctmp2 = 5;
-		else if (ctmp1 == 48)
-			ctmp2 = 4;
-		else if (ctmp1 == 36)
-			ctmp2 = 3;
-		else if (ctmp1 == 24)
-			ctmp2 = 2;
-		else if (ctmp1 == 18)
-			ctmp2 = 1;
-		else if (ctmp1 == 12)
-			ctmp2 = 0;
-		else if (ctmp1 == 22)
-			ctmp2 = 3;
-		else if (ctmp1 == 11)
-			ctmp2 = 2;
-		else if (ctmp1 == 4)
-			ctmp2 = 1;
-		else
-			ctmp2 = 0; /* if( ctmp1 == 2  ) or default */
-
-		if (i == 0)
-			pT01->T01_transmit_rate = ctmp2;
-		else
-			pT01->T01_fall_back_rate = ctmp2;
-	}
-
-	/*
-	 * Set preamble type
-	 */
-	/* RATE_1M */
-	if ((pT01->T01_modulation_type == 0) && (pT01->T01_transmit_rate == 0))
-		pDes->PreambleMode =  WLAN_PREAMBLE_TYPE_LONG;
-	else
-		pDes->PreambleMode =  CURRENT_PREAMBLE_MODE;
-	pT01->T01_plcp_header_length = pDes->PreambleMode; /* Set preamble */
-
-}
-
-static void MLME_GetNextPacket(struct wbsoft_priv *adapter,
-			       struct wb35_descriptor *desc)
-{
-	desc->InternalUsed = desc->buffer_start_index + desc->buffer_number;
-	desc->InternalUsed %= MAX_DESCRIPTOR_BUFFER_INDEX;
-	desc->buffer_address[desc->InternalUsed] = adapter->sMlmeFrame.pMMPDU;
-	desc->buffer_size[desc->InternalUsed] = adapter->sMlmeFrame.len;
-	desc->buffer_total_size += adapter->sMlmeFrame.len;
-	desc->buffer_number++;
-	desc->Type = adapter->sMlmeFrame.data_type;
-}
-
-static void MLMEfreeMMPDUBuffer(struct wbsoft_priv *adapter, s8 *pData)
-{
-	int i;
-
-	/* Reclaim the data buffer */
-	for (i = 0; i < MAX_NUM_TX_MMPDU; i++) {
-		if (pData == (s8 *)&(adapter->sMlmeFrame.TxMMPDU[i]))
-			break;
-	}
-	if (adapter->sMlmeFrame.TxMMPDUInUse[i])
-		adapter->sMlmeFrame.TxMMPDUInUse[i] = false;
-	else  {
-		/* Something wrong
-		 PD43 Add debug code here??? */
-	}
-}
-
-static void MLME_SendComplete(struct wbsoft_priv *adapter, u8 PacketID,
-			      unsigned char SendOK)
-{
-    /* Reclaim the data buffer */
-	adapter->sMlmeFrame.len = 0;
-	MLMEfreeMMPDUBuffer(adapter, adapter->sMlmeFrame.pMMPDU);
-
-	/* Return resource */
-	adapter->sMlmeFrame.is_in_used = PACKET_FREE_TO_USE;
-}
-
-void
-Mds_Tx(struct wbsoft_priv *adapter)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_mds *pMds = &adapter->Mds;
-	struct wb35_descriptor	TxDes;
-	struct wb35_descriptor *pTxDes = &TxDes;
-	u8	*XmitBufAddress;
-	u16	XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold;
-	u8	FillIndex, TxDesIndex, FragmentCount, FillCount;
-	unsigned char	BufferFilled = false;
-
-
-	if (pMds->TxPause)
-		return;
-	if (!hal_driver_init_OK(pHwData))
-		return;
-
-	/* Only one thread can be run here */
-	if (atomic_inc_return(&pMds->TxThreadCount) != 1)
-		goto cleanup;
-
-	/* Start to fill the data */
-	do {
-		FillIndex = pMds->TxFillIndex;
-		/* Is owned by software 0:Yes 1:No */
-		if (pMds->TxOwner[FillIndex]) {
-			pr_debug("[Mds_Tx] Tx Owner is H/W.\n");
-			break;
-		}
-
-		/* Get buffer */
-		XmitBufAddress = pMds->pTxBuffer + (MAX_USB_TX_BUFFER * FillIndex);
-		XmitBufSize = 0;
-		FillCount = 0;
-		do {
-			PacketSize = adapter->sMlmeFrame.len;
-			if (!PacketSize)
-				break;
-
-			/* For Check the buffer resource */
-			FragmentThreshold = CURRENT_FRAGMENT_THRESHOLD;
-			/* 931130.5.b */
-			FragmentCount = PacketSize/FragmentThreshold + 1;
-			/* 931130.5.c 8:MIC */
-			stmp = PacketSize + FragmentCount*32 + 8;
-			if ((XmitBufSize + stmp) >= MAX_USB_TX_BUFFER)
-				break; /* buffer is not enough */
-
-			/*
-			 * Start transmitting
-			 */
-			BufferFilled = true;
-
-			/* Leaves first u8 intact */
-			memset((u8 *)pTxDes + 1, 0, sizeof(struct wb35_descriptor) - 1);
-
-			TxDesIndex = pMds->TxDesIndex; /* Get the current ID */
-			pTxDes->Descriptor_ID = TxDesIndex;
-			/* Storing the information of source coming from */
-			pMds->TxDesFrom[TxDesIndex] = 2;
-			pMds->TxDesIndex++;
-			pMds->TxDesIndex %= MAX_USB_TX_DESCRIPTOR;
-
-			MLME_GetNextPacket(adapter, pTxDes);
-
-			/*
-			 * Copy header. 8byte USB + 24byte 802.11Hdr.
-			 * Set TxRate, Preamble type
-			*/
-			Mds_HeaderCopy(adapter, pTxDes, XmitBufAddress);
-
-			/* For speed up Key setting */
-			if (pTxDes->EapFix) {
-				pr_debug("35: EPA 4th frame detected. Size = %d\n",
-						 PacketSize);
-				pHwData->IsKeyPreSet = 1;
-			}
-
-			/* Copy (fragment) frame body, and set USB, 802.11 hdr flag */
-			CurrentSize = Mds_BodyCopy(adapter, pTxDes, XmitBufAddress);
-
-			/* Set RTS/CTS and Normal duration field into buffer */
-			Mds_DurationSet(adapter, pTxDes, XmitBufAddress);
-
-			/* Shift to the next address */
-			XmitBufSize += CurrentSize;
-			XmitBufAddress += CurrentSize;
-
-			/* Get packet to transmit completed,
-			 * 1:TESTSTA 2:MLME 3: Ndis data
-			*/
-			MLME_SendComplete(adapter, 0, true);
-
-			/* Software TSC count 20060214 */
-			pMds->TxTsc++;
-			if (pMds->TxTsc == 0)
-				pMds->TxTsc_2++;
-
-			FillCount++; /* 20060928 */
-		/*
-		 * End of multiple MSDU copy loop.
-		 * false = single
-		 * true = multiple sending
-		 */
-		} while (HAL_USB_MODE_BURST(pHwData));
-
-		/* Move to the next one, if necessary */
-		if (BufferFilled) {
-			/* size setting */
-			pMds->TxBufferSize[FillIndex] = XmitBufSize;
-
-			/* 20060928 set Tx count */
-			pMds->TxCountInBuffer[FillIndex] = FillCount;
-
-			/* Set owner flag */
-			pMds->TxOwner[FillIndex] = 1;
-
-			pMds->TxFillIndex++;
-			pMds->TxFillIndex %= MAX_USB_TX_BUFFER_NUMBER;
-			BufferFilled = false;
-		} else
-			break;
-
-		if (!PacketSize) /* No more pk for transmitting */
-			break;
-
-	} while (true);
-
-	/*
-	 * Start to send by lower module
-	 */
-	if (!pHwData->IsKeyPreSet)
-		Wb35Tx_start(adapter);
-
-cleanup:
-		atomic_dec(&pMds->TxThreadCount);
-}
-
-void
-Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02)
-{
-	struct wb35_mds *pMds = &adapter->Mds;
-	struct hw_data *pHwData = &adapter->sHwData;
-	u8	PacketId = (u8)pT02->T02_Tx_PktID;
-	unsigned char	SendOK = true;
-	u8	RetryCount, TxRate;
-
-	if (pT02->T02_IgnoreResult) /* Don't care about the result */
-		return;
-	if (pT02->T02_IsLastMpdu) {
-		/* TODO: DTO -- get the retry count and fragment count */
-		/* Tx rate */
-		TxRate = pMds->TxRate[PacketId][0];
-		RetryCount = (u8)pT02->T02_MPDU_Cnt;
-		if (pT02->value & FLAG_ERROR_TX_MASK) {
-			SendOK = false;
-
-			if (pT02->T02_transmit_abort || pT02->T02_out_of_MaxTxMSDULiftTime) {
-				/* retry error */
-				pHwData->dto_tx_retry_count += (RetryCount+1);
-				/* [for tx debug] */
-				if (RetryCount < 7)
-					pHwData->tx_retry_count[RetryCount] += RetryCount;
-				else
-					pHwData->tx_retry_count[7] += RetryCount;
-				pr_debug("dto_tx_retry_count =%d\n",
-						pHwData->dto_tx_retry_count);
-				MTO_SetTxCount(adapter, TxRate, RetryCount);
-			}
-			pHwData->dto_tx_frag_count += (RetryCount+1);
-
-			/* [for tx debug] */
-			if (pT02->T02_transmit_abort_due_to_TBTT)
-				pHwData->tx_TBTT_start_count++;
-			if (pT02->T02_transmit_without_encryption_due_to_wep_on_false)
-				pHwData->tx_WepOn_false_count++;
-			if (pT02->T02_discard_due_to_null_wep_key)
-				pHwData->tx_Null_key_count++;
-		} else {
-			if (pT02->T02_effective_transmission_rate)
-				pHwData->tx_ETR_count++;
-			MTO_SetTxCount(adapter, TxRate, RetryCount);
-		}
-
-		/* Clear send result buffer */
-		pMds->TxResult[PacketId] = 0;
-	} else
-		pMds->TxResult[PacketId] |= ((u16)(pT02->value & 0x0ffff));
-}
diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h
deleted file mode 100644
index 159b2eb366e8..000000000000
--- a/drivers/staging/winbond/mds_f.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __WINBOND_MDS_F_H
-#define __WINBOND_MDS_F_H
-
-#include "wbhal.h"
-#include "core.h"
-
-unsigned char Mds_initial(struct wbsoft_priv *adapter);
-void Mds_Tx(struct wbsoft_priv *adapter);
-void Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pt02);
-void Mds_MpduProcess(struct wbsoft_priv *adapter,
-		     struct wb35_descriptor *prxdes);
-
-/* For data frame sending */
-u16 MDS_GetPacketSize(struct wbsoft_priv *adapter);
-void MDS_GetNextPacket(struct wbsoft_priv *adapter,
-		       struct wb35_descriptor *pdes);
-void MDS_GetNextPacketComplete(struct wbsoft_priv *adapter,
-			       struct wb35_descriptor *pdes);
-void MDS_SendResult(struct wbsoft_priv *adapter, u8 packetid,
-		    unsigned char sendok);
-
-#endif
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
deleted file mode 100644
index 2972d66c9436..000000000000
--- a/drivers/staging/winbond/mds_s.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef __WINBOND_MDS_H
-#define __WINBOND_MDS_H
-
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/atomic.h>
-
-#include "localpara.h"
-#include "mac_structures.h"
-
-/* Preamble_Type, see <SFS-802.11G-MIB-203> */
-enum {
-	WLAN_PREAMBLE_TYPE_SHORT,
-	WLAN_PREAMBLE_TYPE_LONG,
-};
-
-/*****************************************************************************/
-#define MAX_USB_TX_DESCRIPTOR		15	/* IS89C35 ability */
-#define MAX_USB_TX_BUFFER_NUMBER	4	/* Virtual pre-buffer number of MAX_USB_TX_BUFFER */
-#define MAX_USB_TX_BUFFER		4096	/* IS89C35 ability 4n alignment is required for hardware */
-
-#define AUTH_REQUEST_PAIRWISE_ERROR	0	/* _F flag setting */
-#define AUTH_REQUEST_GROUP_ERROR	1	/* _F flag setting */
-
-#define CURRENT_FRAGMENT_THRESHOLD	(adapter->Mds.TxFragmentThreshold & ~0x1)
-#define CURRENT_PREAMBLE_MODE		(psLOCAL->boShortPreamble ? WLAN_PREAMBLE_TYPE_SHORT : WLAN_PREAMBLE_TYPE_LONG)
-#define CURRENT_TX_RATE_FOR_MNG		(adapter->sLocalPara.CurrentTxRateForMng)
-#define CURRENT_PROTECT_MECHANISM	(psLOCAL->boProtectMechanism)
-#define CURRENT_RTS_THRESHOLD		(adapter->Mds.TxRTSThreshold)
-
-#define MIB_GS_XMIT_OK_INC		(adapter->sLocalPara.GS_XMIT_OK++)
-#define MIB_GS_RCV_OK_INC		(adapter->sLocalPara.GS_RCV_OK++)
-#define MIB_GS_XMIT_ERROR_INC		(adapter->sLocalPara.GS_XMIT_ERROR)
-
-/* ---------- TX ----------------------------------- */
-#define ETHERNET_TX_DESCRIPTORS         MAX_USB_TX_BUFFER_NUMBER
-
-/* ---------- RX ----------------------------------- */
-#define ETHERNET_RX_DESCRIPTORS		8	/* It's not necessary to allocate more than 2 in sync indicate */
-
-/*
- * ================================================================
- * Configuration default value
- * ================================================================
- */
-#define DEFAULT_MULTICASTLISTMAX	32	/* standard */
-#define DEFAULT_TX_BURSTLENGTH		3	/* 32 Longwords */
-#define DEFAULT_RX_BURSTLENGTH		3	/* 32 Longwords */
-#define DEFAULT_TX_THRESHOLD		0	/* Full Packet */
-#define DEFAULT_RX_THRESHOLD		0	/* Full Packet */
-#define DEFAULT_MAXTXRATE		6	/* 11 Mbps (Long) */
-#define DEFAULT_CHANNEL			3	/* Chennel 3 */
-#define DEFAULT_RTSThreshold		2347	/* Disable RTS */
-#define DEFAULT_PME			0	/* Disable */
-#define DEFAULT_SIFSTIME		10
-#define DEFAULT_ACKTIME_1ML             304	/* 148 + 44 + 112 */
-#define DEFAULT_ACKTIME_2ML             248	/* 148 + 44 + 56 */
-#define DEFAULT_FRAGMENT_THRESHOLD      2346	/* No fragment */
-#define DEFAULT_PREAMBLE_LENGTH		72
-#define DEFAULT_PLCPHEADERTIME_LENGTH	24
-
-/*
- * ------------------------------------------------------------------------
- * 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns
- * instead of 960 ns. This shall be fixed in the future W89C32
- * -------------------------------------------------------------------------
- */
-#define DEFAULT_MAX_RECEIVE_TIME	16440000
-
-#define RX_BUF_SIZE			2352	/* 600 - For 301 must be multiple of 8 */
-#define MAX_RX_DESCRIPTORS		18	/* Rx Layer 2 */
-
-/* For brand-new rx system */
-#define MDS_ID_IGNORE			ETHERNET_RX_DESCRIPTORS
-
-/* For Tx Packet status classify */
-#define PACKET_FREE_TO_USE		0
-#define PACKET_COME_FROM_NDIS		0x08
-#define PACKET_COME_FROM_MLME		0x80
-#define PACKET_SEND_COMPLETE		0xff
-
-struct wb35_mds {
-	/* For Tx usage */
-	u8	TxOwner[((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03)];
-	u8	*pTxBuffer;
-	u16	TxBufferSize[((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01)];
-	u8	TxDesFrom[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];/* 1: MLME 2: NDIS control 3: NDIS data */
-	u8	TxCountInBuffer[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];
-
-	u8	TxFillIndex;	/* the next index of TxBuffer can be used */
-	u8	TxDesIndex;	/* The next index of TxDes can be used */
-	u8	ScanTxPause;	/* data Tx pause because the scanning is progressing, but probe request Tx won't. */
-	u8	TxPause;	/*For pause the Mds_Tx modult */
-
-	atomic_t	TxThreadCount;	/* For thread counting */
-
-	u16	TxResult[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)];/* Collect the sending result of Mpdu */
-
-	u8	MicRedundant[8]; /* For tmp use */
-	u8	*MicWriteAddress[2]; /* The start address to fill the Mic, use 2 point due to Mic maybe fragment */
-
-	u16	MicWriteSize[2];
-
-	u16	MicAdd; /* If want to add the Mic, this variable equal to 8 */
-	u16	MicWriteIndex; /* The number of MicWriteAddress */
-
-	u8	TxRate[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)][2]; /* [0] current tx rate, [1] fall back rate */
-	u8	TxInfo[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)]; /*Store information for callback function */
-
-	/* ---- for Tx Parameter */
-	u16	TxFragmentThreshold;	/* For frame body only */
-	u16	TxRTSThreshold;
-
-	u32	MaxReceiveTime;
-
-	/* depend on OS, */
-	u32	MulticastListNo;
-	u32	PacketFilter; /* Setting by NDIS, the current packet filter in use. */
-	u8	MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH];
-
-	/* COUNTERMEASURE */
-	u8	bMICfailCount;
-	u8	boCounterMeasureBlock;
-	u8	reserved_4[2];
-
-	u32	TxTsc;
-	u32	TxTsc_2;
-};
-
-#endif
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
deleted file mode 100644
index b031ecd4f3c0..000000000000
--- a/drivers/staging/winbond/mto.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * ============================================================================
- * MTO.C -
- *
- * Description:
- * MAC Throughput Optimization for W89C33 802.11g WLAN STA.
- *
- * The following MIB attributes or internal variables will be affected
- * while the MTO is being executed:
- *	dot11FragmentationThreshold,
- *	dot11RTSThreshold,
- *	transmission rate and PLCP preamble type,
- *	CCA mode,
- *	antenna diversity.
- *
- * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
- * ============================================================================
- */
-
-#include "sme_api.h"
-#include "wbhal.h"
-#include "wb35reg_f.h"
-#include "core.h"
-#include "mto.h"
-
-/* Declare SQ3 to rate and fragmentation threshold table */
-/* Declare fragmentation threshold table */
-#define MTO_MAX_FRAG_TH_LEVELS		5
-#define MTO_MAX_DATA_RATE_LEVELS	12
-
-u16 MTO_Frag_Th_Tbl[MTO_MAX_FRAG_TH_LEVELS] = {
-	256, 384, 512, 768, 1536
-};
-
-/*
- * Declare data rate table:
- * The following table will be changed at anytime if the operation rate
- * supported by AP don't match the table
- */
-static u8 MTO_Data_Rate_Tbl[MTO_MAX_DATA_RATE_LEVELS] = {
-	2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108
-};
-
-/* this record the retry rate at different data rate */
-static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];
-
-static u8 boSparseTxTraffic;
-
-/*
- * ===========================================================================
- * MTO_Init --
- *
- *  Description:
- *    Initialize MTO parameters.
- *
- *    This function should be invoked during system initialization.
- *
- *  Arguments:
- *    adapter      - The pointer to the Miniport adapter Context
- * ===========================================================================
- */
-void MTO_Init(struct wbsoft_priv *adapter)
-{
-	int i;
-
-	MTO_PREAMBLE_TYPE() = MTO_PREAMBLE_SHORT;   /* for test */
-
-	MTO_CNT_ANT(0)			= 0;
-	MTO_CNT_ANT(1)			= 0;
-	MTO_SQ_ANT(0)			= 0;
-	MTO_SQ_ANT(1)			= 0;
-
-	MTO_AGING_TIMEOUT()		= 0;
-
-	/* The following parameters should be initialized to the values set by user */
-	MTO_RATE_LEVEL()		= 0;
-	MTO_FRAG_TH_LEVEL()		= 4;
-	MTO_RTS_THRESHOLD()		= MTO_FRAG_TH() + 1;
-	MTO_RTS_THRESHOLD_SETUP()	= MTO_FRAG_TH() + 1;
-	MTO_RATE_CHANGE_ENABLE()	= 1;
-	MTO_FRAG_CHANGE_ENABLE()	= 0;
-	MTO_POWER_CHANGE_ENABLE()	= 1;
-	MTO_PREAMBLE_CHANGE_ENABLE()	= 1;
-	MTO_RTS_CHANGE_ENABLE()		= 0;
-
-	for (i = 0; i < MTO_MAX_DATA_RATE_LEVELS; i++)
-		retryrate_rec[i] = 5;
-
-	MTO_TXFLOWCOUNT() = 0;
-	/* --------- DTO threshold parameters ------------- */
-	MTOPARA_PERIODIC_CHECK_CYCLE()		= 10;
-	MTOPARA_RSSI_TH_FOR_ANTDIV()		= 10;
-	MTOPARA_TXCOUNT_TH_FOR_CALC_RATE()	= 50;
-	MTOPARA_TXRATE_INC_TH()			= 10;
-	MTOPARA_TXRATE_DEC_TH()			= 30;
-	MTOPARA_TXRATE_EQ_TH()			= 40;
-	MTOPARA_TXRATE_BACKOFF()		= 12;
-	MTOPARA_TXRETRYRATE_REDUCE()		= 6;
-	if (MTO_TXPOWER_FROM_EEPROM == 0xff) {
-		switch (MTO_HAL()->phy_type) {
-		case RF_AIROHA_2230:
-		case RF_AIROHA_2230S:
-			MTOPARA_TXPOWER_INDEX() = 46; /* MAX-8 @@ Only for AL 2230 */
-			break;
-		case RF_AIROHA_7230:
-			MTOPARA_TXPOWER_INDEX() = 49;
-			break;
-		case RF_WB_242:
-			MTOPARA_TXPOWER_INDEX() = 10;
-			break;
-		case RF_WB_242_1:
-			MTOPARA_TXPOWER_INDEX() = 24;
-			break;
-		}
-	} else { /* follow the setting from EEPROM */
-		MTOPARA_TXPOWER_INDEX() = MTO_TXPOWER_FROM_EEPROM;
-	}
-	RFSynthesizer_SetPowerIndex(MTO_HAL(), (u8) MTOPARA_TXPOWER_INDEX());
-	/* ------------------------------------------------ */
-
-	/* For RSSI turning -- Cancel load from EEPROM */
-	MTO_DATA().RSSI_high = -41;
-	MTO_DATA().RSSI_low = -60;
-}
-
-/* ===========================================================================
- * Description:
- *	If we enable DTO, we will ignore the tx count with different tx rate
- *	from DTO rate. This is because when we adjust DTO tx rate, there could
- *	be some packets in the tx queue with previous tx rate
- */
-
-void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 tx_rate, u8 index)
-{
-	MTO_TXFLOWCOUNT()++;
-	if ((MTO_ENABLE == 1) && (MTO_RATE_CHANGE_ENABLE() == 1)) {
-		if (tx_rate == MTO_DATA_RATE()) {
-			if (index == 0) {
-				if (boSparseTxTraffic)
-					MTO_HAL()->dto_tx_frag_count += MTOPARA_PERIODIC_CHECK_CYCLE();
-				else
-					MTO_HAL()->dto_tx_frag_count += 1;
-			} else {
-				if (index < 8) {
-					MTO_HAL()->dto_tx_retry_count += index;
-					MTO_HAL()->dto_tx_frag_count += (index + 1);
-				} else {
-					MTO_HAL()->dto_tx_retry_count += 7;
-					MTO_HAL()->dto_tx_frag_count += 7;
-				}
-			}
-		} else if (MTO_DATA_RATE() > 48 && tx_rate == 48) {
-			/* for reducing data rate scheme, do not calculate different data rate. 3 is the reducing data rate at retry. */
-			if (index < 3) {
-				MTO_HAL()->dto_tx_retry_count += index;
-				MTO_HAL()->dto_tx_frag_count += (index + 1);
-			} else {
-				MTO_HAL()->dto_tx_retry_count += 3;
-				MTO_HAL()->dto_tx_frag_count += 3;
-			}
-
-		}
-	} else {
-		MTO_HAL()->dto_tx_retry_count += index;
-		MTO_HAL()->dto_tx_frag_count += (index + 1);
-	}
-}
diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h
deleted file mode 100644
index 8d41eeda45bf..000000000000
--- a/drivers/staging/winbond/mto.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * ==================================================================
- * MTO.H
- *
- * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
- * ==================================================================
- */
-#ifndef __MTO_H__
-#define __MTO_H__
-
-#include <linux/types.h>
-
-struct wbsoft_priv;
-
-#define MTO_PREAMBLE_LONG               WLAN_PREAMBLE_TYPE_LONG
-#define MTO_PREAMBLE_SHORT              WLAN_PREAMBLE_TYPE_SHORT
-
-/* Defines the parameters used in the MAC Throughput Optimization algorithm */
-struct wb35_mto_params {
-	u32	TxFlowCount; /* to judge what kind the tx flow(sparse or busy) is */
-
-	/* --------- DTO threshold parameters ------------- */
-	u16	DTO_PeriodicCheckCycle;
-	u16	DTO_RssiThForAntDiv;
-
-	u16	DTO_TxCountThForCalcNewRate;
-	u16	DTO_TxRateIncTh;
-
-	u16	DTO_TxRateDecTh;
-	u16	DTO_TxRateEqTh;
-
-	u16	DTO_TxRateBackOff;
-	u16	DTO_TxRetryRateReduce;
-
-	u16	DTO_TxPowerIndex;		/* 0 ~ 31 */
-	u16	reserved_1;
-	/* ------------------------------------------------ */
-
-	u8	PowerChangeEnable;
-	u8	AntDiversityEnable;
-	u8	CCA_Mode;
-	u8	CCA_Mode_Setup;
-	u8	Preamble_Type;
-	u8	PreambleChangeEnable;
-
-	u8	DataRateLevel;
-	u8	DataRateChangeEnable;
-	u8	FragThresholdLevel;
-	u8	FragThresholdChangeEnable;
-
-	u16	RTSThreshold;
-	u16	RTSThreshold_Setup;
-
-	u32	AvgIdleSlot;
-	u32	Pr_Interf;
-	u32	AvgGapBtwnInterf;
-
-	u8	RTSChangeEnable;
-	u8	Ant_sel;
-	u8	aging_timeout;
-	u8	reserved_2;
-
-	u32	Cnt_Ant[2];
-	u32	SQ_Ant[2];
-
-	u8	FallbackRateLevel;
-	u8	OfdmRateLevel;
-
-	u8	RatePolicy;
-	u8	reserved_3[3];
-
-	/* For RSSI turning */
-	s32	RSSI_high;
-	s32	RSSI_low;
-};
-
-
-#define MTO_DATA()		(adapter->sMtoPara)
-#define MTO_HAL()		(&adapter->sHwData)
-#define MTO_SET_PREAMBLE_TYPE(x) /* Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) */
-#define MTO_ENABLE		(adapter->sLocalPara.TxRateMode == RATE_AUTO)
-#define MTO_TXPOWER_FROM_EEPROM	(adapter->sHwData.PowerIndexFromEEPROM)
-#define LOCAL_ANTENNA_NO()	(adapter->sLocalPara.bAntennaNo)
-#define LOCAL_IS_CONNECTED()	(adapter->sLocalPara.wConnectedSTAindex != 0)
-#define MTO_INITTXRATE_MODE	(adapter->sHwData.SoftwareSet&0x2) /* bit 1 */
-
-#define MTO_POWER_CHANGE_ENABLE()	MTO_DATA().PowerChangeEnable
-#define MTO_CCA_MODE()			MTO_DATA().CCA_Mode
-#define MTO_CCA_MODE_SETUP()		MTO_DATA().CCA_Mode_Setup
-#define MTO_PREAMBLE_TYPE()		MTO_DATA().Preamble_Type
-#define MTO_PREAMBLE_CHANGE_ENABLE()	MTO_DATA().PreambleChangeEnable
-
-#define MTO_RATE_LEVEL()		MTO_DATA().DataRateLevel
-#define MTO_OFDM_RATE_LEVEL()		MTO_DATA().OfdmRateLevel
-#define MTO_RATE_CHANGE_ENABLE()	MTO_DATA().DataRateChangeEnable
-#define MTO_FRAG_TH_LEVEL()		MTO_DATA().FragThresholdLevel
-#define MTO_FRAG_CHANGE_ENABLE()	MTO_DATA().FragThresholdChangeEnable
-#define MTO_RTS_THRESHOLD()		MTO_DATA().RTSThreshold
-#define MTO_RTS_CHANGE_ENABLE()		MTO_DATA().RTSChangeEnable
-#define MTO_RTS_THRESHOLD_SETUP()	MTO_DATA().RTSThreshold_Setup
-
-#define MTO_AVG_IDLE_SLOT()		MTO_DATA().AvgIdleSlot
-#define MTO_PR_INTERF()			MTO_DATA().Pr_Interf
-#define MTO_AVG_GAP_BTWN_INTERF()	MTO_DATA().AvgGapBtwnInterf
-
-#define MTO_CNT_ANT(x)			MTO_DATA().Cnt_Ant[(x)]
-#define MTO_SQ_ANT(x)			MTO_DATA().SQ_Ant[(x)]
-#define MTO_AGING_TIMEOUT()		MTO_DATA().aging_timeout
-
-#define MTO_TXFLOWCOUNT()		MTO_DATA().TxFlowCount
-
-/* --------- DTO threshold parameters ------------- */
-#define	MTOPARA_PERIODIC_CHECK_CYCLE()		MTO_DATA().DTO_PeriodicCheckCycle
-#define	MTOPARA_RSSI_TH_FOR_ANTDIV()		MTO_DATA().DTO_RssiThForAntDiv
-#define	MTOPARA_TXCOUNT_TH_FOR_CALC_RATE()	MTO_DATA().DTO_TxCountThForCalcNewRate
-#define	MTOPARA_TXRATE_INC_TH()			MTO_DATA().DTO_TxRateIncTh
-#define	MTOPARA_TXRATE_DEC_TH()			MTO_DATA().DTO_TxRateDecTh
-#define MTOPARA_TXRATE_EQ_TH()			MTO_DATA().DTO_TxRateEqTh
-#define	MTOPARA_TXRATE_BACKOFF()		MTO_DATA().DTO_TxRateBackOff
-#define	MTOPARA_TXRETRYRATE_REDUCE()		MTO_DATA().DTO_TxRetryRateReduce
-#define MTOPARA_TXPOWER_INDEX()			MTO_DATA().DTO_TxPowerIndex
-/* ------------------------------------------------ */
-
-
-extern u16 MTO_Frag_Th_Tbl[];
-
-#define MTO_DATA_RATE()			MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
-#define MTO_FRAG_TH()			MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
-
-void MTO_Init(struct wbsoft_priv *);
-void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-
-#endif /* __MTO_H__ */
-
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
deleted file mode 100644
index 8aecced62dde..000000000000
--- a/drivers/staging/winbond/phy_calibration.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-/*
- * phy_302_calibration.c
- *
- * Copyright (C) 2002, 2005  Winbond Electronics Corp.
- *
- * modification history
- * ---------------------------------------------------------------------------
- * 0.01.001, 2003-04-16, Kevin      created
- *
- */
-
-/****************** INCLUDE FILES SECTION ***********************************/
-#include "phy_calibration.h"
-#include "wbhal.h"
-#include "wb35reg_f.h"
-#include "core.h"
-
-
-/****************** DEBUG CONSTANT AND MACRO SECTION ************************/
-
-/****************** LOCAL CONSTANT AND MACRO SECTION ************************/
-#define LOOP_TIMES      20
-#define US              1000/* MICROSECOND*/
-
-#define AG_CONST        0.6072529350
-#define FIXED(X)        ((s32)((X) * 32768.0))
-#define DEG2RAD(X)      (0.017453 * (X))
-
-static const s32 Angles[] = {
-	FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),
-	FIXED(DEG2RAD(14.0362)),  FIXED(DEG2RAD(7.12502)),
-	FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
-	FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)),
-	FIXED(DEG2RAD(0.223811)), FIXED(DEG2RAD(0.111906)),
-	FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
-};
-
-/****************** LOCAL FUNCTION DECLARATION SECTION **********************/
-
-/*
- * void    _phy_rf_write_delay(struct hw_data *phw_data);
- * void    phy_init_rf(struct hw_data *phw_data);
- */
-
-/****************** FUNCTION DEFINITION SECTION *****************************/
-
-static s32 _s13_to_s32(u32 data)
-{
-	u32     val;
-
-	val = (data & 0x0FFF);
-
-	if ((data & BIT(12)) != 0)
-		val |= 0xFFFFF000;
-
-	return (s32) val;
-}
-
-/****************************************************************************/
-static s32 _s4_to_s32(u32 data)
-{
-	s32     val;
-
-	val = (data & 0x0007);
-
-	if ((data & BIT(3)) != 0)
-		val |= 0xFFFFFFF8;
-
-	return val;
-}
-
-static u32 _s32_to_s4(s32 data)
-{
-	u32     val;
-
-	if (data > 7)
-		data = 7;
-	else if (data < -8)
-		data = -8;
-
-	val = data & 0x000F;
-
-	return val;
-}
-
-/****************************************************************************/
-static s32 _s5_to_s32(u32 data)
-{
-	s32     val;
-
-	val = (data & 0x000F);
-
-	if ((data & BIT(4)) != 0)
-		val |= 0xFFFFFFF0;
-
-	return val;
-}
-
-static u32 _s32_to_s5(s32 data)
-{
-	u32     val;
-
-	if (data > 15)
-		data = 15;
-	else if (data < -16)
-		data = -16;
-
-	val = data & 0x001F;
-
-	return val;
-}
-
-/****************************************************************************/
-static s32 _s6_to_s32(u32 data)
-{
-	s32     val;
-
-	val = (data & 0x001F);
-
-	if ((data & BIT(5)) != 0)
-		val |= 0xFFFFFFE0;
-
-	return val;
-}
-
-static u32 _s32_to_s6(s32 data)
-{
-	u32     val;
-
-	if (data > 31)
-		data = 31;
-	else if (data < -32)
-		data = -32;
-
-	val = data & 0x003F;
-
-	return val;
-}
-
-/****************************************************************************/
-static s32 _floor(s32 n)
-{
-	if (n > 0)
-		n += 5;
-	else
-		n -= 5;
-
-	return n/10;
-}
-
-/****************************************************************************/
-/*
- * The following code is sqare-root function.
- * sqsum is the input and the output is sq_rt;
- * The maximum of sqsum = 2^27 -1;
- */
-static u32 _sqrt(u32 sqsum)
-{
-	u32     sq_rt;
-
-	int     g0, g1, g2, g3, g4;
-	int     seed;
-	int     next;
-	int     step;
-
-	g4 =  sqsum / 100000000;
-	g3 = (sqsum - g4*100000000) / 1000000;
-	g2 = (sqsum - g4*100000000 - g3*1000000) / 10000;
-	g1 = (sqsum - g4*100000000 - g3*1000000 - g2*10000) / 100;
-	g0 = (sqsum - g4*100000000 - g3*1000000 - g2*10000 - g1*100);
-
-	next = g4;
-	step = 0;
-	seed = 0;
-	while (((seed+1)*(step+1)) <= next) {
-		step++;
-		seed++;
-	}
-
-	sq_rt = seed * 10000;
-	next = (next-(seed*step))*100 + g3;
-
-	step = 0;
-	seed = 2 * seed * 10;
-	while (((seed+1)*(step+1)) <= next) {
-		step++;
-		seed++;
-	}
-
-	sq_rt = sq_rt + step * 1000;
-	next = (next - seed * step) * 100 + g2;
-	seed = (seed + step) * 10;
-	step = 0;
-	while (((seed+1)*(step+1)) <= next) {
-		step++;
-		seed++;
-	}
-
-	sq_rt = sq_rt + step * 100;
-	next = (next - seed * step) * 100 + g1;
-	seed = (seed + step) * 10;
-	step = 0;
-
-	while (((seed+1)*(step+1)) <= next) {
-		step++;
-		seed++;
-	}
-
-	sq_rt = sq_rt + step * 10;
-	next = (next - seed * step) * 100 + g0;
-	seed = (seed + step) * 10;
-	step = 0;
-
-	while (((seed+1)*(step+1)) <= next) {
-		step++;
-		seed++;
-	}
-
-	sq_rt = sq_rt + step;
-
-	return sq_rt;
-}
-
-/****************************************************************************/
-static void _sin_cos(s32 angle, s32 *sin, s32 *cos)
-{
-	s32 X, Y, TargetAngle, CurrAngle;
-	unsigned    Step;
-
-	X = FIXED(AG_CONST);      /* AG_CONST * cos(0) */
-	Y = 0;                    /* AG_CONST * sin(0) */
-	TargetAngle = abs(angle);
-	CurrAngle = 0;
-
-	for (Step = 0; Step < 12; Step++) {
-		s32 NewX;
-
-		if (TargetAngle > CurrAngle) {
-			NewX = X - (Y >> Step);
-			Y = (X >> Step) + Y;
-			X = NewX;
-			CurrAngle += Angles[Step];
-		} else {
-			NewX = X + (Y >> Step);
-			Y = -(X >> Step) + Y;
-			X = NewX;
-			CurrAngle -= Angles[Step];
-		}
-	}
-
-	if (angle > 0) {
-		*cos = X;
-		*sin = Y;
-	} else {
-		*cos = X;
-		*sin = -Y;
-	}
-}
-
-static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number,
-				     u32 *pValue)
-{
-	if (number < 0x1000)
-		number += 0x1000;
-	return Wb35Reg_ReadSync(pHwData, number, pValue);
-}
-#define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C)
-
-static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number,
-				     u32 value)
-{
-	unsigned char ret;
-
-	if (number < 0x1000)
-		number += 0x1000;
-	ret = Wb35Reg_WriteSync(pHwData, number, value);
-	return ret;
-}
-#define hw_set_dxx_reg(_A, _B, _C) hal_set_dxx_reg(_A, _B, (u32)_C)
-
-
-static void _reset_rx_cal(struct hw_data *phw_data)
-{
-	u32     val;
-
-	hw_get_dxx_reg(phw_data, 0x54, &val);
-
-	if (phw_data->revision == 0x2002) /* 1st-cut */
-		val &= 0xFFFF0000;
-	else /* 2nd-cut */
-		val &= 0x000003FF;
-
-	hw_set_dxx_reg(phw_data, 0x54, val);
-}
-
-
-/**************for winbond calibration*********/
-
-
-
-/**********************************************/
-static void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequency)
-{
-	u32     reg_agc_ctrl3;
-	u32     reg_a_acq_ctrl;
-	u32     reg_b_acq_ctrl;
-	u32     val;
-
-	PHY_DEBUG(("[CAL] -> [1]_rxadc_dc_offset_cancellation()\n"));
-	phy_init_rf(phw_data);
-
-	/* set calibration channel */
-	if ((RF_WB_242 == phw_data->phy_type) ||
-		(RF_WB_242_1 == phw_data->phy_type)) /* 20060619.5 Add */{
-		if ((frequency >= 2412) && (frequency <= 2484)) {
-			/* w89rf242 change frequency to 2390Mhz */
-			PHY_DEBUG(("[CAL] W89RF242/11G/Channel=2390Mhz\n"));
-			phy_set_rf_data(phw_data, 3, (3<<24)|0x025586);
-
-		}
-	} else {
-
-	}
-
-	/* reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel */
-	hw_get_dxx_reg(phw_data, 0x5C, &val);
-	val &= ~(0x03FF);
-	hw_set_dxx_reg(phw_data, 0x5C, val);
-
-	/* reset the TX and RX IQ calibration data */
-	hw_set_dxx_reg(phw_data, 0x3C, 0);
-	hw_set_dxx_reg(phw_data, 0x54, 0);
-
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
-
-	/* a. Disable AGC */
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
-	reg_agc_ctrl3 &= ~BIT(2);
-	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val);
-	val |= MASK_AGC_FIX_GAIN;
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
-
-	/* b. Turn off BB RX */
-	hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, &reg_a_acq_ctrl);
-	reg_a_acq_ctrl |= MASK_AMER_OFF_REG;
-	hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl);
-
-	hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, &reg_b_acq_ctrl);
-	reg_b_acq_ctrl |= MASK_BMER_OFF_REG;
-	hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl);
-
-	/* c. Make sure MAC is in receiving mode
-	 * d. Turn ON ADC calibration
-	 *    - ADC calibrator is triggered by this signal rising from 0 to 1 */
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
-	val &= ~MASK_ADC_DC_CAL_STR;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
-
-	val |= MASK_ADC_DC_CAL_STR;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
-
-	/* e. The results are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */
-#ifdef _DEBUG
-	hw_get_dxx_reg(phw_data, REG_OFFSET_READ, &val);
-	PHY_DEBUG(("[CAL]    REG_OFFSET_READ = 0x%08X\n", val));
-
-	PHY_DEBUG(("[CAL]    ** adc_dc_cal_i = %d (0x%04X)\n",
-			   _s9_to_s32(val&0x000001FF), val&0x000001FF));
-	PHY_DEBUG(("[CAL]    ** adc_dc_cal_q = %d (0x%04X)\n",
-			   _s9_to_s32((val&0x0003FE00)>>9),
-			   (val&0x0003FE00)>>9));
-#endif
-
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
-	val &= ~MASK_ADC_DC_CAL_STR;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
-
-	/* f. Turn on BB RX */
-	/* hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, &reg_a_acq_ctrl); */
-	reg_a_acq_ctrl &= ~MASK_AMER_OFF_REG;
-	hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl);
-
-	/* hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, &reg_b_acq_ctrl); */
-	reg_b_acq_ctrl &= ~MASK_BMER_OFF_REG;
-	hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl);
-
-	/* g. Enable AGC */
-	/* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */
-	reg_agc_ctrl3 |= BIT(2);
-	reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-}
-
-/* 20060612.1.a 20060718.1 Modify */
-static u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
-						   s32 a_2_threshold,
-						   s32 b_2_threshold)
-{
-	u32     reg_mode_ctrl;
-	s32     iq_mag_0_tx;
-	s32     iqcal_tone_i0;
-	s32     iqcal_tone_q0;
-	s32     iqcal_tone_i;
-	s32     iqcal_tone_q;
-	u32     sqsum;
-	s32     rot_i_b;
-	s32     rot_q_b;
-	s32     tx_cal_flt_b[4];
-	s32     tx_cal[4];
-	s32     tx_cal_reg[4];
-	s32     a_2, b_2;
-	s32     sin_b, sin_2b;
-	s32     cos_b, cos_2b;
-	s32     divisor;
-	s32     temp1, temp2;
-	u32     val;
-	u16     loop;
-	s32     iqcal_tone_i_avg, iqcal_tone_q_avg;
-	u8      verify_count;
-	int capture_time;
-
-	PHY_DEBUG(("[CAL] -> _tx_iq_calibration_loop()\n"));
-	PHY_DEBUG(("[CAL]    ** a_2_threshold = %d\n", a_2_threshold));
-	PHY_DEBUG(("[CAL]    ** b_2_threshold = %d\n", b_2_threshold));
-
-	verify_count = 0;
-
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
-
-	loop = LOOP_TIMES;
-
-	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n",
-				   (LOOP_TIMES-loop+1)));
-
-		iqcal_tone_i_avg = 0;
-		iqcal_tone_q_avg = 0;
-		if (!hw_set_dxx_reg(phw_data, 0x3C, 0x00)) /* 20060718.1 modify */
-			return 0;
-		for (capture_time = 0; capture_time < 10; capture_time++) {
-			/*
-			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start"
-			 *    to 0x1 to enable "IQ calibration Mode II"
-			 */
-			reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
-			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
-			reg_mode_ctrl |= (MASK_CALIB_START|0x02);
-			reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2);
-			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-			/* b. */
-			hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
-			PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
-
-			iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
-			iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
-			PHY_DEBUG(("[CAL]    ** iqcal_tone_i0=%d, iqcal_tone_q0=%d\n",
-				   iqcal_tone_i0, iqcal_tone_q0));
-
-			sqsum = iqcal_tone_i0*iqcal_tone_i0 +
-			iqcal_tone_q0*iqcal_tone_q0;
-			iq_mag_0_tx = (s32) _sqrt(sqsum);
-			PHY_DEBUG(("[CAL]    ** iq_mag_0_tx=%d\n", iq_mag_0_tx));
-
-			/* c. Set "calib_start" to 0x0 */
-			reg_mode_ctrl &= ~MASK_CALIB_START;
-			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-			/*
-			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start"
-			 *    to 0x1 to enable "IQ calibration Mode II"
-			 */
-			/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
-			hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
-			reg_mode_ctrl |= (MASK_CALIB_START|0x03);
-			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-			/* e. */
-			hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
-			PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
-
-			iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
-			iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-			PHY_DEBUG(("[CAL]    ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
-					   iqcal_tone_i, iqcal_tone_q));
-			if (capture_time == 0)
-				continue;
-			else {
-				iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time;
-				iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time;
-			}
-		}
-
-		iqcal_tone_i = iqcal_tone_i_avg;
-		iqcal_tone_q = iqcal_tone_q_avg;
-
-
-		rot_i_b = (iqcal_tone_i * iqcal_tone_i0 +
-				   iqcal_tone_q * iqcal_tone_q0) / 1024;
-		rot_q_b = (iqcal_tone_i * iqcal_tone_q0 * (-1) +
-				   iqcal_tone_q * iqcal_tone_i0) / 1024;
-		PHY_DEBUG(("[CAL]    ** rot_i_b = %d, rot_q_b = %d\n",
-				   rot_i_b, rot_q_b));
-
-		/* f. */
-		divisor = ((iq_mag_0_tx * iq_mag_0_tx * 2)/1024 - rot_i_b) * 2;
-
-		if (divisor == 0) {
-			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n"));
-			PHY_DEBUG(("[CAL] ** divisor=0 to calculate EPS and THETA !!\n"));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-			break;
-		}
-
-		a_2 = (rot_i_b * 32768) / divisor;
-		b_2 = (rot_q_b * (-32768)) / divisor;
-		PHY_DEBUG(("[CAL]    ***** EPSILON/2 = %d\n", a_2));
-		PHY_DEBUG(("[CAL]    ***** THETA/2   = %d\n", b_2));
-
-		phw_data->iq_rsdl_gain_tx_d2 = a_2;
-		phw_data->iq_rsdl_phase_tx_d2 = b_2;
-
-		/* if ((abs(a_2) < 150) && (abs(b_2) < 100)) */
-		/* if ((abs(a_2) < 200) && (abs(b_2) < 200)) */
-		if ((abs(a_2) < a_2_threshold) && (abs(b_2) < b_2_threshold)) {
-			verify_count++;
-
-			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n"));
-			PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-
-			if (verify_count > 2) {
-				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION (EPS,THETA) OK !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				return 0;
-			}
-
-			continue;
-		} else
-			verify_count = 0;
-
-		_sin_cos(b_2, &sin_b, &cos_b);
-		_sin_cos(b_2*2, &sin_2b, &cos_2b);
-		PHY_DEBUG(("[CAL]    ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b));
-		PHY_DEBUG(("[CAL]    ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b));
-
-		if (cos_2b == 0) {
-			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n"));
-			PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n"));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-			break;
-		}
-
-		/* 1280 * 32768 = 41943040 */
-		temp1 = (41943040/cos_2b)*cos_b;
-
-		/* temp2 = (41943040/cos_2b)*sin_b*(-1); */
-		if (phw_data->revision == 0x2002) /* 1st-cut */
-			temp2 = (41943040/cos_2b)*sin_b*(-1);
-		else /* 2nd-cut */
-			temp2 = (41943040*4/cos_2b)*sin_b*(-1);
-
-		tx_cal_flt_b[0] = _floor(temp1/(32768+a_2));
-		tx_cal_flt_b[1] = _floor(temp2/(32768+a_2));
-		tx_cal_flt_b[2] = _floor(temp2/(32768-a_2));
-		tx_cal_flt_b[3] = _floor(temp1/(32768-a_2));
-		PHY_DEBUG(("[CAL]    ** tx_cal_flt_b[0] = %d\n", tx_cal_flt_b[0]));
-		PHY_DEBUG(("[CAL]       tx_cal_flt_b[1] = %d\n", tx_cal_flt_b[1]));
-		PHY_DEBUG(("[CAL]       tx_cal_flt_b[2] = %d\n", tx_cal_flt_b[2]));
-		PHY_DEBUG(("[CAL]       tx_cal_flt_b[3] = %d\n", tx_cal_flt_b[3]));
-
-		tx_cal[2] = tx_cal_flt_b[2];
-		tx_cal[2] = tx_cal[2] + 3;
-		tx_cal[1] = tx_cal[2];
-		tx_cal[3] = tx_cal_flt_b[3] - 128;
-		tx_cal[0] = -tx_cal[3] + 1;
-
-		PHY_DEBUG(("[CAL]       tx_cal[0] = %d\n", tx_cal[0]));
-		PHY_DEBUG(("[CAL]       tx_cal[1] = %d\n", tx_cal[1]));
-		PHY_DEBUG(("[CAL]       tx_cal[2] = %d\n", tx_cal[2]));
-		PHY_DEBUG(("[CAL]       tx_cal[3] = %d\n", tx_cal[3]));
-
-		/* if ((tx_cal[0] == 0) && (tx_cal[1] == 0) &&
-		      (tx_cal[2] == 0) && (tx_cal[3] == 0))
-		  { */
-		/*    PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n"));
-		 *    PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION COMPLETE !!\n"));
-		 *    PHY_DEBUG(("[CAL] ******************************************\n"));
-		 *    return 0;
-		  } */
-
-		/* g. */
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			hw_get_dxx_reg(phw_data, 0x54, &val);
-			PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
-			tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28);
-			tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24);
-			tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20);
-			tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16);
-		} else /* 2nd-cut */{
-			hw_get_dxx_reg(phw_data, 0x3C, &val);
-			PHY_DEBUG(("[CAL]    ** 0x3C = 0x%08X\n", val));
-			tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
-			tx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
-			tx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
-			tx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10);
-
-		}
-
-		PHY_DEBUG(("[CAL]    ** tx_cal_reg[0] = %d\n", tx_cal_reg[0]));
-		PHY_DEBUG(("[CAL]       tx_cal_reg[1] = %d\n", tx_cal_reg[1]));
-		PHY_DEBUG(("[CAL]       tx_cal_reg[2] = %d\n", tx_cal_reg[2]));
-		PHY_DEBUG(("[CAL]       tx_cal_reg[3] = %d\n", tx_cal_reg[3]));
-
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			if (((tx_cal_reg[0] == 7) || (tx_cal_reg[0] == (-8))) &&
-				((tx_cal_reg[3] == 7) || (tx_cal_reg[3] == (-8)))) {
-				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				break;
-			}
-		} else /* 2nd-cut */{
-			if (((tx_cal_reg[0] == 31) || (tx_cal_reg[0] == (-32))) &&
-				((tx_cal_reg[3] == 31) || (tx_cal_reg[3] == (-32)))) {
-				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				break;
-			}
-		}
-
-		tx_cal[0] = tx_cal[0] + tx_cal_reg[0];
-		tx_cal[1] = tx_cal[1] + tx_cal_reg[1];
-		tx_cal[2] = tx_cal[2] + tx_cal_reg[2];
-		tx_cal[3] = tx_cal[3] + tx_cal_reg[3];
-		PHY_DEBUG(("[CAL]    ** apply tx_cal[0] = %d\n", tx_cal[0]));
-		PHY_DEBUG(("[CAL]       apply tx_cal[1] = %d\n", tx_cal[1]));
-		PHY_DEBUG(("[CAL]       apply tx_cal[2] = %d\n", tx_cal[2]));
-		PHY_DEBUG(("[CAL]       apply tx_cal[3] = %d\n", tx_cal[3]));
-
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			val &= 0x0000FFFF;
-			val |= ((_s32_to_s4(tx_cal[0]) << 28)|
-					(_s32_to_s4(tx_cal[1]) << 24)|
-					(_s32_to_s4(tx_cal[2]) << 20)|
-					(_s32_to_s4(tx_cal[3]) << 16));
-			hw_set_dxx_reg(phw_data, 0x54, val);
-			PHY_DEBUG(("[CAL]    ** CALIB_DATA = 0x%08X\n", val));
-			return 0;
-		} else /* 2nd-cut */{
-			val &= 0x000003FF;
-			val |= ((_s32_to_s5(tx_cal[0]) << 27)|
-					(_s32_to_s6(tx_cal[1]) << 21)|
-					(_s32_to_s6(tx_cal[2]) << 15)|
-					(_s32_to_s5(tx_cal[3]) << 10));
-			hw_set_dxx_reg(phw_data, 0x3C, val);
-			PHY_DEBUG(("[CAL]    ** TX_IQ_CALIBRATION = 0x%08X\n", val));
-			return 0;
-		}
-
-		/* i. Set "calib_start" to 0x0 */
-		reg_mode_ctrl &= ~MASK_CALIB_START;
-		hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-		loop--;
-	}
-
-	return 1;
-}
-
-static void _tx_iq_calibration_winbond(struct hw_data *phw_data)
-{
-	u32     reg_agc_ctrl3;
-#ifdef _DEBUG
-	s32     tx_cal_reg[4];
-
-#endif
-	u32     reg_mode_ctrl;
-	u32     val;
-	u8      result;
-
-	PHY_DEBUG(("[CAL] -> [4]_tx_iq_calibration()\n"));
-
-	/* 0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
-	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
-	phy_set_rf_data(phw_data, 11, (11<<24)|0x19BDD6); /* 20060612.1.a 0x1905D6); */
-	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
-	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C60A); /* 0x24C60A (high temperature) */
-	/* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
-	phy_set_rf_data(phw_data, 6, (6<<24)|0x34880C); /* 20060612.1.a 0x06890C); */
-	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
-	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
-	/* ; [BB-chip]: Calibration (6f).Send test pattern */
-	/* ; [BB-chip]: Calibration (6g). Search RXGCL optimal value */
-	/* ; [BB-chip]: Calibration (6h). Calculate TX-path IQ imbalance and setting TX path IQ compensation table */
-	/* phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); */
-
-	msleep(30); /* 20060612.1.a 30ms delay. Add the follow 2 lines */
-	/* To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750 */
-	adjust_TXVGA_for_iq_mag(phw_data);
-
-	/* a. Disable AGC */
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
-	reg_agc_ctrl3 &= ~BIT(2);
-	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-
-	hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val);
-	val |= MASK_AGC_FIX_GAIN;
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
-
-	result = _tx_iq_calibration_loop_winbond(phw_data, 150, 100);
-
-	if (result > 0) {
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			hw_get_dxx_reg(phw_data, 0x54, &val);
-			val &= 0x0000FFFF;
-			hw_set_dxx_reg(phw_data, 0x54, val);
-		} else /* 2nd-cut*/{
-			hw_get_dxx_reg(phw_data, 0x3C, &val);
-			val &= 0x000003FF;
-			hw_set_dxx_reg(phw_data, 0x3C, val);
-		}
-
-		result = _tx_iq_calibration_loop_winbond(phw_data, 300, 200);
-
-		if (result > 0) {
-			if (phw_data->revision == 0x2002) /* 1st-cut */{
-				hw_get_dxx_reg(phw_data, 0x54, &val);
-				val &= 0x0000FFFF;
-				hw_set_dxx_reg(phw_data, 0x54, val);
-			} else /* 2nd-cut*/{
-				hw_get_dxx_reg(phw_data, 0x3C, &val);
-				val &= 0x000003FF;
-				hw_set_dxx_reg(phw_data, 0x3C, val);
-			}
-
-			result = _tx_iq_calibration_loop_winbond(phw_data, 500, 400);
-			if (result > 0) {
-				if (phw_data->revision == 0x2002) /* 1st-cut */{
-					hw_get_dxx_reg(phw_data, 0x54, &val);
-					val &= 0x0000FFFF;
-					hw_set_dxx_reg(phw_data, 0x54, val);
-				} else /* 2nd-cut */{
-					hw_get_dxx_reg(phw_data, 0x3C, &val);
-					val &= 0x000003FF;
-					hw_set_dxx_reg(phw_data, 0x3C, val);
-				}
-
-
-				result = _tx_iq_calibration_loop_winbond(phw_data, 700, 500);
-
-				if (result > 0) {
-					PHY_DEBUG(("[CAL] ** <_tx_iq_calibration> **************\n"));
-					PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION FAILURE !!\n"));
-					PHY_DEBUG(("[CAL] **************************************\n"));
-
-					if (phw_data->revision == 0x2002) /* 1st-cut */{
-						hw_get_dxx_reg(phw_data, 0x54, &val);
-						val &= 0x0000FFFF;
-						hw_set_dxx_reg(phw_data, 0x54, val);
-					} else /* 2nd-cut */{
-						hw_get_dxx_reg(phw_data, 0x3C, &val);
-						val &= 0x000003FF;
-						hw_set_dxx_reg(phw_data, 0x3C, val);
-					}
-				}
-			}
-		}
-	}
-
-	/* i. Set "calib_start" to 0x0 */
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	reg_mode_ctrl &= ~MASK_CALIB_START;
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-	/* g. Enable AGC */
-	/* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */
-	reg_agc_ctrl3 |= BIT(2);
-	reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
-	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
-
-#ifdef _DEBUG
-	if (phw_data->revision == 0x2002) /* 1st-cut */{
-		hw_get_dxx_reg(phw_data, 0x54, &val);
-		PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
-		tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28);
-		tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24);
-		tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20);
-		tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16);
-	} else /* 2nd-cut */ {
-		hw_get_dxx_reg(phw_data, 0x3C, &val);
-		PHY_DEBUG(("[CAL]    ** 0x3C = 0x%08X\n", val));
-		tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
-		tx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
-		tx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
-		tx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10);
-
-	}
-
-	PHY_DEBUG(("[CAL]    ** tx_cal_reg[0] = %d\n", tx_cal_reg[0]));
-	PHY_DEBUG(("[CAL]       tx_cal_reg[1] = %d\n", tx_cal_reg[1]));
-	PHY_DEBUG(("[CAL]       tx_cal_reg[2] = %d\n", tx_cal_reg[2]));
-	PHY_DEBUG(("[CAL]       tx_cal_reg[3] = %d\n", tx_cal_reg[3]));
-#endif
-
-
-	/*
-	 * for test - BEN
-	 * RF Control Override
-	 */
-}
-
-/*****************************************************/
-static u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 frequency)
-{
-	u32     reg_mode_ctrl;
-	s32     iqcal_tone_i;
-	s32     iqcal_tone_q;
-	s32     iqcal_image_i;
-	s32     iqcal_image_q;
-	s32     rot_tone_i_b;
-	s32     rot_tone_q_b;
-	s32     rot_image_i_b;
-	s32     rot_image_q_b;
-	s32     rx_cal_flt_b[4];
-	s32     rx_cal[4];
-	s32     rx_cal_reg[4];
-	s32     a_2, b_2;
-	s32     sin_b, sin_2b;
-	s32     cos_b, cos_2b;
-	s32     temp1, temp2;
-	u32     val;
-	u16     loop;
-
-	u32     pwr_tone;
-	u32     pwr_image;
-	u8      verify_count;
-
-	s32     iqcal_tone_i_avg, iqcal_tone_q_avg;
-	s32     iqcal_image_i_avg, iqcal_image_q_avg;
-	u16	capture_time;
-
-	PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration_loop()\n"));
-	PHY_DEBUG(("[CAL] ** factor = %d\n", factor));
-
-	hw_set_dxx_reg(phw_data, 0x58, 0x44444444); /* IQ_Alpha */
-
-	/* b. */
-
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
-
-	verify_count = 0;
-
-	/* for (loop = 0; loop < 1; loop++) */
-	/* for (loop = 0; loop < LOOP_TIMES; loop++) */
-	loop = LOOP_TIMES;
-	while (loop > 0) {
-		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n",
-				   (LOOP_TIMES-loop+1)));
-		iqcal_tone_i_avg = 0;
-		iqcal_tone_q_avg = 0;
-		iqcal_image_i_avg = 0;
-		iqcal_image_q_avg = 0;
-		capture_time = 0;
-
-		for (capture_time = 0; capture_time < 10; capture_time++) {
-			/* i. Set "calib_start" to 0x0 */
-			reg_mode_ctrl &= ~MASK_CALIB_START;
-			if (!hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl))/*20060718.1 modify */
-				return 0;
-			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
-			reg_mode_ctrl |= (MASK_CALIB_START|0x1);
-			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-			/* c. */
-			hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
-			PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
-
-			iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
-			iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-			PHY_DEBUG(("[CAL]    ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
-				iqcal_tone_i, iqcal_tone_q));
-
-			hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
-			PHY_DEBUG(("[CAL]    CALIB_READ2 = 0x%08X\n", val));
-
-			iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
-			iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
-			PHY_DEBUG(("[CAL]    ** iqcal_image_i = %d, iqcal_image_q = %d\n",
-				iqcal_image_i, iqcal_image_q));
-			if (capture_time == 0)
-				continue;
-			else {
-				iqcal_image_i_avg = (iqcal_image_i_avg*(capture_time-1) + iqcal_image_i)/capture_time;
-				iqcal_image_q_avg = (iqcal_image_q_avg*(capture_time-1) + iqcal_image_q)/capture_time;
-				iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time;
-				iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time;
-			}
-		}
-
-
-		iqcal_image_i = iqcal_image_i_avg;
-		iqcal_image_q = iqcal_image_q_avg;
-		iqcal_tone_i = iqcal_tone_i_avg;
-		iqcal_tone_q = iqcal_tone_q_avg;
-
-		/* d. */
-		rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i +
-					iqcal_tone_q * iqcal_tone_q) / 1024;
-		rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) +
-					iqcal_tone_q * iqcal_tone_i) / 1024;
-		rot_image_i_b = (iqcal_image_i * iqcal_tone_i -
-					iqcal_image_q * iqcal_tone_q) / 1024;
-		rot_image_q_b = (iqcal_image_i * iqcal_tone_q +
-					iqcal_image_q * iqcal_tone_i) / 1024;
-
-		PHY_DEBUG(("[CAL]    ** rot_tone_i_b  = %d\n", rot_tone_i_b));
-		PHY_DEBUG(("[CAL]    ** rot_tone_q_b  = %d\n", rot_tone_q_b));
-		PHY_DEBUG(("[CAL]    ** rot_image_i_b = %d\n", rot_image_i_b));
-		PHY_DEBUG(("[CAL]    ** rot_image_q_b = %d\n", rot_image_q_b));
-
-		/* f. */
-		if (rot_tone_i_b == 0) {
-			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n"));
-			PHY_DEBUG(("[CAL] ** rot_tone_i_b=0 to calculate EPS and THETA !!\n"));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-			break;
-		}
-
-		a_2 = (rot_image_i_b * 32768) / rot_tone_i_b -
-			phw_data->iq_rsdl_gain_tx_d2;
-		b_2 = (rot_image_q_b * 32768) / rot_tone_i_b -
-			phw_data->iq_rsdl_phase_tx_d2;
-
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_gain_tx_d2 = %d\n",
-			   phw_data->iq_rsdl_gain_tx_d2));
-		PHY_DEBUG(("[CAL]    ** iq_rsdl_phase_tx_d2= %d\n",
-			   phw_data->iq_rsdl_phase_tx_d2));
-		PHY_DEBUG(("[CAL]    ***** EPSILON/2 = %d\n", a_2));
-		PHY_DEBUG(("[CAL]    ***** THETA/2   = %d\n", b_2));
-
-		_sin_cos(b_2, &sin_b, &cos_b);
-		_sin_cos(b_2*2, &sin_2b, &cos_2b);
-		PHY_DEBUG(("[CAL]    ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b));
-		PHY_DEBUG(("[CAL]    ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b));
-
-		if (cos_2b == 0) {
-			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n"));
-			PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n"));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-			break;
-		}
-
-		/* 1280 * 32768 = 41943040 */
-		temp1 = (41943040/cos_2b)*cos_b;
-
-		/* temp2 = (41943040/cos_2b)*sin_b*(-1); */
-		if (phw_data->revision == 0x2002)/* 1st-cut */
-			temp2 = (41943040/cos_2b)*sin_b*(-1);
-		else/* 2nd-cut */
-			temp2 = (41943040*4/cos_2b)*sin_b*(-1);
-
-		rx_cal_flt_b[0] = _floor(temp1/(32768+a_2));
-		rx_cal_flt_b[1] = _floor(temp2/(32768-a_2));
-		rx_cal_flt_b[2] = _floor(temp2/(32768+a_2));
-		rx_cal_flt_b[3] = _floor(temp1/(32768-a_2));
-
-		PHY_DEBUG(("[CAL]    ** rx_cal_flt_b[0] = %d\n", rx_cal_flt_b[0]));
-		PHY_DEBUG(("[CAL]       rx_cal_flt_b[1] = %d\n", rx_cal_flt_b[1]));
-		PHY_DEBUG(("[CAL]       rx_cal_flt_b[2] = %d\n", rx_cal_flt_b[2]));
-		PHY_DEBUG(("[CAL]       rx_cal_flt_b[3] = %d\n", rx_cal_flt_b[3]));
-
-		rx_cal[0] = rx_cal_flt_b[0] - 128;
-		rx_cal[1] = rx_cal_flt_b[1];
-		rx_cal[2] = rx_cal_flt_b[2];
-		rx_cal[3] = rx_cal_flt_b[3] - 128;
-		PHY_DEBUG(("[CAL]    ** rx_cal[0] = %d\n", rx_cal[0]));
-		PHY_DEBUG(("[CAL]       rx_cal[1] = %d\n", rx_cal[1]));
-		PHY_DEBUG(("[CAL]       rx_cal[2] = %d\n", rx_cal[2]));
-		PHY_DEBUG(("[CAL]       rx_cal[3] = %d\n", rx_cal[3]));
-
-		/* e. */
-		pwr_tone = (iqcal_tone_i*iqcal_tone_i + iqcal_tone_q*iqcal_tone_q);
-		pwr_image = (iqcal_image_i*iqcal_image_i +
-			     iqcal_image_q*iqcal_image_q)*factor;
-
-		PHY_DEBUG(("[CAL]    ** pwr_tone  = %d\n", pwr_tone));
-		PHY_DEBUG(("[CAL]    ** pwr_image  = %d\n", pwr_image));
-
-		if (pwr_tone > pwr_image) {
-			verify_count++;
-
-			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *************\n"));
-			PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count));
-			PHY_DEBUG(("[CAL] ******************************************\n"));
-
-			if (verify_count > 2) {
-				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION OK !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				return 0;
-			}
-
-			continue;
-		}
-		/* g. */
-		hw_get_dxx_reg(phw_data, 0x54, &val);
-		PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
-
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12);
-			rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >>  8);
-			rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >>  4);
-			rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F));
-		} else /* 2nd-cut */{
-			rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
-			rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
-			rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
-			rx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10);
-		}
-
-		PHY_DEBUG(("[CAL]    ** rx_cal_reg[0] = %d\n", rx_cal_reg[0]));
-		PHY_DEBUG(("[CAL]       rx_cal_reg[1] = %d\n", rx_cal_reg[1]));
-		PHY_DEBUG(("[CAL]       rx_cal_reg[2] = %d\n", rx_cal_reg[2]));
-		PHY_DEBUG(("[CAL]       rx_cal_reg[3] = %d\n", rx_cal_reg[3]));
-
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			if (((rx_cal_reg[0] == 7) || (rx_cal_reg[0] == (-8))) &&
-				((rx_cal_reg[3] == 7) || (rx_cal_reg[3] == (-8)))) {
-				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				break;
-			}
-		} else /* 2nd-cut */{
-			if (((rx_cal_reg[0] == 31) || (rx_cal_reg[0] == (-32))) &&
-				((rx_cal_reg[3] == 31) || (rx_cal_reg[3] == (-32)))) {
-				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
-				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				break;
-			}
-		}
-
-		rx_cal[0] = rx_cal[0] + rx_cal_reg[0];
-		rx_cal[1] = rx_cal[1] + rx_cal_reg[1];
-		rx_cal[2] = rx_cal[2] + rx_cal_reg[2];
-		rx_cal[3] = rx_cal[3] + rx_cal_reg[3];
-		PHY_DEBUG(("[CAL]    ** apply rx_cal[0] = %d\n", rx_cal[0]));
-		PHY_DEBUG(("[CAL]       apply rx_cal[1] = %d\n", rx_cal[1]));
-		PHY_DEBUG(("[CAL]       apply rx_cal[2] = %d\n", rx_cal[2]));
-		PHY_DEBUG(("[CAL]       apply rx_cal[3] = %d\n", rx_cal[3]));
-
-		hw_get_dxx_reg(phw_data, 0x54, &val);
-		if (phw_data->revision == 0x2002) /* 1st-cut */{
-			val &= 0x0000FFFF;
-			val |= ((_s32_to_s4(rx_cal[0]) << 12)|
-					(_s32_to_s4(rx_cal[1]) <<  8)|
-					(_s32_to_s4(rx_cal[2]) <<  4)|
-					(_s32_to_s4(rx_cal[3])));
-			hw_set_dxx_reg(phw_data, 0x54, val);
-		} else /* 2nd-cut */{
-			val &= 0x000003FF;
-			val |= ((_s32_to_s5(rx_cal[0]) << 27)|
-					(_s32_to_s6(rx_cal[1]) << 21)|
-					(_s32_to_s6(rx_cal[2]) << 15)|
-					(_s32_to_s5(rx_cal[3]) << 10));
-			hw_set_dxx_reg(phw_data, 0x54, val);
-
-			if (loop == 3)
-				return 0;
-		}
-		PHY_DEBUG(("[CAL]    ** CALIB_DATA = 0x%08X\n", val));
-
-		loop--;
-	}
-
-	return 1;
-}
-
-/*************************************************/
-
-/***************************************************************/
-static void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
-{
-/* figo 20050523 marked this flag for can't compile for release */
-#ifdef _DEBUG
-	s32     rx_cal_reg[4];
-	u32     val;
-#endif
-
-	u8      result;
-
-	PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration()\n"));
-/* a. Set RFIC to "RX calibration mode" */
-	/* ; ----- Calibration (7). RX path IQ imbalance calibration loop */
-	/*	0x01 0xFFBFC2  ; 3FEFF  ; Calibration (7a). enable RX IQ calibration loop circuits */
-	phy_set_rf_data(phw_data, 1, (1<<24)|0xEFBFC2);
-	/*	0x0B 0x1A01D6  ; 06817  ; Calibration (7b). enable RX I/Q cal loop SW1 circuits */
-	phy_set_rf_data(phw_data, 11, (11<<24)|0x1A05D6);
-	/* 0x05 0x24848A  ; 09212  ; Calibration (7c). setting TX-VGA gain (TXGCH) to 2 --> to be optimized */
-	phy_set_rf_data(phw_data, 5, (5<<24) | phw_data->txvga_setting_for_cal);
-	/* 0x06 0x06840C  ; 01A10  ; Calibration (7d). RXGCH=00; RXGCL=010 000 (RXVGA) --> to be optimized */
-	phy_set_rf_data(phw_data, 6, (6<<24)|0x06834C);
-	/* 0x00 0xFFF1C0  ; 3F7C7  ; Calibration (7e). turn on IQ imbalance/Test mode */
-	phy_set_rf_data(phw_data, 0, (0<<24)|0xFFF1C0);
-
-	/*  ; [BB-chip]: Calibration (7f). Send test pattern */
-	/*	; [BB-chip]: Calibration (7g). Search RXGCL optimal value */
-	/*	; [BB-chip]: Calibration (7h). Calculate RX-path IQ imbalance and setting RX path IQ compensation table */
-
-	result = _rx_iq_calibration_loop_winbond(phw_data, 12589, frequency);
-
-	if (result > 0) {
-		_reset_rx_cal(phw_data);
-		result = _rx_iq_calibration_loop_winbond(phw_data, 7943, frequency);
-
-		if (result > 0) {
-			_reset_rx_cal(phw_data);
-			result = _rx_iq_calibration_loop_winbond(phw_data, 5011, frequency);
-
-			if (result > 0) {
-				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration> **************\n"));
-				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION FAILURE !!\n"));
-				PHY_DEBUG(("[CAL] **************************************\n"));
-				_reset_rx_cal(phw_data);
-			}
-		}
-	}
-
-#ifdef _DEBUG
-	hw_get_dxx_reg(phw_data, 0x54, &val);
-	PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
-
-	if (phw_data->revision == 0x2002) /* 1st-cut */{
-		rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12);
-		rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >>  8);
-		rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >>  4);
-		rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F));
-	} else /* 2nd-cut */{
-		rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
-		rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
-		rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
-		rx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10);
-	}
-
-	PHY_DEBUG(("[CAL]    ** rx_cal_reg[0] = %d\n", rx_cal_reg[0]));
-	PHY_DEBUG(("[CAL]       rx_cal_reg[1] = %d\n", rx_cal_reg[1]));
-	PHY_DEBUG(("[CAL]       rx_cal_reg[2] = %d\n", rx_cal_reg[2]));
-	PHY_DEBUG(("[CAL]       rx_cal_reg[3] = %d\n", rx_cal_reg[3]));
-#endif
-
-}
-
-/*******************************************************/
-void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
-{
-	u32     reg_mode_ctrl;
-	u32     iq_alpha;
-
-	PHY_DEBUG(("[CAL] -> phy_calibration_winbond()\n"));
-
-	hw_get_dxx_reg(phw_data, 0x58, &iq_alpha);
-
-	_rxadc_dc_offset_cancellation_winbond(phw_data, frequency);
-	/* _txidac_dc_offset_cancellation_winbond(phw_data); */
-	/* _txqdac_dc_offset_cancellation_winbond(phw_data); */
-
-	_tx_iq_calibration_winbond(phw_data);
-	_rx_iq_calibration_winbond(phw_data, frequency);
-
-	/*********************************************************************/
-	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE|MASK_CALIB_START); /* set when finish */
-	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-	/* i. Set RFIC to "Normal mode" */
-	hw_set_dxx_reg(phw_data, 0x58, iq_alpha);
-
-	/*********************************************************************/
-	phy_init_rf(phw_data);
-
-}
-
-/******************/
-void phy_set_rf_data(struct hw_data *pHwData, u32 index, u32 value)
-{
-	u32 ltmp = 0;
-
-	switch (pHwData->phy_type) {
-	case RF_MAXIM_2825:
-	case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
-		ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
-		break;
-
-	case RF_MAXIM_2827:
-		ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
-		break;
-
-	case RF_MAXIM_2828:
-		ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
-		break;
-
-	case RF_MAXIM_2829:
-		ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
-		break;
-
-	case RF_AIROHA_2230:
-	case RF_AIROHA_2230S: /* 20060420 Add this */
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(value, 20);
-		break;
-
-	case RF_AIROHA_7230:
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | (value&0xffffff);
-		break;
-
-	case RF_WB_242:
-	case RF_WB_242_1:/* 20060619.5 Add */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(value, 24);
-		break;
-	}
-
-	Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-}
-
-/* 20060717 modify as Bruce's mail */
-unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
-{
-	int init_txvga = 0;
-	u32     reg_mode_ctrl;
-	u32     val;
-	s32     iqcal_tone_i0;
-	s32     iqcal_tone_q0;
-	u32     sqsum;
-	s32     iq_mag_0_tx;
-	u8	reg_state;
-	int	current_txvga;
-
-
-	reg_state = 0;
-	for (init_txvga = 0; init_txvga < 10; init_txvga++) {
-		current_txvga = (0x24C40A|(init_txvga<<6));
-		phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga));
-		phw_data->txvga_setting_for_cal = current_txvga;
-
-		msleep(30);/* 20060612.1.a */
-
-		if (!hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl))/* 20060718.1 modify */
-			return false;
-
-		PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
-
-		/*
-		 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
-		 *    enable "IQ alibration Mode II"
-		 */
-		reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
-		reg_mode_ctrl &= ~MASK_IQCAL_MODE;
-		reg_mode_ctrl |= (MASK_CALIB_START|0x02);
-		reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2);
-		hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
-		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
-
-		udelay(1);/* 20060612.1.a */
-
-		udelay(300);/* 20060612.1.a */
-
-		/* b. */
-		hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
-
-		PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
-		udelay(300);/* 20060612.1.a */
-
-		iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
-		iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
-		PHY_DEBUG(("[CAL]    ** iqcal_tone_i0=%d, iqcal_tone_q0=%d\n",
-				   iqcal_tone_i0, iqcal_tone_q0));
-
-		sqsum = iqcal_tone_i0*iqcal_tone_i0 + iqcal_tone_q0*iqcal_tone_q0;
-		iq_mag_0_tx = (s32) _sqrt(sqsum);
-		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n",
-			   iq_mag_0_tx));
-
-		if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
-			break;
-		else if (iq_mag_0_tx > 1750) {
-			init_txvga = -2;
-			continue;
-		} else
-			continue;
-
-	}
-
-	if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
-		return true;
-	else
-		return false;
-}
diff --git a/drivers/staging/winbond/phy_calibration.h b/drivers/staging/winbond/phy_calibration.h
deleted file mode 100644
index 78fc68058607..000000000000
--- a/drivers/staging/winbond/phy_calibration.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __WINBOND_PHY_CALIBRATION_H
-#define __WINBOND_PHY_CALIBRATION_H
-
-#include "wbhal.h"
-
-#define REG_AGC_CTRL1		0x1000
-#define REG_AGC_CTRL2		0x1004
-#define REG_AGC_CTRL3		0x1008
-#define REG_AGC_CTRL4		0x100C
-#define REG_AGC_CTRL5		0x1010
-#define REG_AGC_CTRL6		0x1014
-#define REG_AGC_CTRL7		0x1018
-#define REG_AGC_CTRL8		0x101C
-#define REG_AGC_CTRL9		0x1020
-#define REG_AGC_CTRL10		0x1024
-#define REG_CCA_CTRL		0x1028
-#define REG_A_ACQ_CTRL		0x102C
-#define REG_B_ACQ_CTRL		0x1030
-#define REG_A_TXRX_CTRL		0x1034
-#define REG_B_TXRX_CTRL		0x1038
-#define REG_A_TX_COEF3		0x103C
-#define REG_A_TX_COEF2		0x1040
-#define REG_A_TX_COEF1		0x1044
-#define REG_B_TX_COEF2		0x1048
-#define REG_B_TX_COEF1		0x104C
-#define REG_MODE_CTRL		0x1050
-#define REG_CALIB_DATA		0x1054
-#define REG_IQ_ALPHA		0x1058
-#define REG_DC_CANCEL		0x105C
-#define REG_WTO_READ		0x1060
-#define REG_OFFSET_READ		0x1064
-#define REG_CALIB_READ1		0x1068
-#define REG_CALIB_READ2		0x106C
-#define REG_A_FREQ_EST		0x1070
-
-
-#define MASK_AMER_OFF_REG	BIT(31)
-
-#define MASK_BMER_OFF_REG	BIT(31)
-
-#define MASK_LNA_FIX_GAIN	(BIT(3) | BIT(4))
-#define MASK_AGC_FIX		BIT(1)
-
-#define MASK_AGC_FIX_GAIN	0xFF00
-
-#define MASK_ADC_DC_CAL_STR	BIT(10)
-#define MASK_CALIB_START	BIT(4)
-#define MASK_IQCAL_TONE_SEL	(BIT(3) | BIT(2))
-#define MASK_IQCAL_MODE		(BIT(1) | BIT(0))
-
-#define MASK_TX_CAL_0		0xF0000000
-#define TX_CAL_0_SHIFT		28
-#define MASK_TX_CAL_1		0x0F000000
-#define TX_CAL_1_SHIFT		24
-#define MASK_TX_CAL_2		0x00F00000
-#define TX_CAL_2_SHIFT		20
-#define MASK_TX_CAL_3		0x000F0000
-#define TX_CAL_3_SHIFT		16
-#define MASK_RX_CAL_0		0x0000F000
-#define RX_CAL_0_SHIFT		12
-#define MASK_RX_CAL_1		0x00000F00
-#define RX_CAL_1_SHIFT		8
-#define MASK_RX_CAL_2		0x000000F0
-#define RX_CAL_2_SHIFT		4
-#define MASK_RX_CAL_3		0x0000000F
-#define RX_CAL_3_SHIFT		0
-
-#define MASK_CANCEL_DC_I	0x3E0
-#define CANCEL_DC_I_SHIFT	5
-#define MASK_CANCEL_DC_Q	0x01F
-#define CANCEL_DC_Q_SHIFT	0
-
-#define MASK_ADC_DC_CAL_I(x)	(((x) & 0x0003FE00) >> 9)
-#define MASK_ADC_DC_CAL_Q(x)	((x) & 0x000001FF)
-
-#define MASK_IQCAL_TONE_I	0x00001FFF
-#define SHIFT_IQCAL_TONE_I(x)	((x) >> 0)
-#define MASK_IQCAL_TONE_Q	0x03FFE000
-#define SHIFT_IQCAL_TONE_Q(x)	((x) >> 13)
-
-void phy_set_rf_data(struct hw_data *pHwData, u32 index, u32 value);
-void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency);
-#define phy_init_rf(_A)		/* RFSynthesizer_initial(_A) */
-
-#endif
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
deleted file mode 100644
index 5fd4c4a72eee..000000000000
--- a/drivers/staging/winbond/reg.c
+++ /dev/null
@@ -1,2328 +0,0 @@
-#include "wbhal.h"
-#include "wb35reg_f.h"
-#include "core.h"
-
-/*
- * ====================================================
- * Original Phy.h
- * ====================================================
- */
-
-/*
- * ====================================================
- * For MAXIM2825/6/7 Ver. 331 or more
- *
- * 0x00 0x000a2
- * 0x01 0x21cc0
- * 0x02 0x13802
- * 0x02 0x1383a
- *
- * channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
- * channe1 02 ; 0x03 0x32141 ; 0x04 0x08444;
- * channe1 03 ; 0x03 0x32143 ; 0x04 0x0aeee;
- * channe1 04 ; 0x03 0x32142 ; 0x04 0x0b333;
- * channe1 05 ; 0x03 0x31141 ; 0x04 0x08444;
- * channe1 06 ; 0x03 0x31143 ; 0x04 0x0aeee;
- * channe1 07 ; 0x03 0x31142 ; 0x04 0x0b333;
- * channe1 08 ; 0x03 0x33141 ; 0x04 0x08444;
- * channe1 09 ; 0x03 0x33143 ; 0x04 0x0aeee;
- * channe1 10 ; 0x03 0x33142 ; 0x04 0x0b333;
- * channe1 11 ; 0x03 0x30941 ; 0x04 0x08444;
- * channe1 12 ; 0x03 0x30943 ; 0x04 0x0aeee;
- * channe1 13 ; 0x03 0x30942 ; 0x04 0x0b333;
- *
- * 0x05 0x28986
- * 0x06 0x18008
- * 0x07 0x38400
- * 0x08 0x05100; 100 Hz DC
- * 0x08 0x05900; 30 KHz DC
- * 0x09 0x24f08
- * 0x0a 0x17e00, 0x17ea0
- * 0x0b 0x37d80
- * 0x0c 0x0c900  --  0x0ca00 (lager power 9db than 0x0c000), 0x0c000
- */
-
-/* MAX2825 (pure b/g) */
-static u32 max2825_rf_data[] = {
-	(0x00<<18) | 0x000a2,
-	(0x01<<18) | 0x21cc0,
-	(0x02<<18) | 0x13806,
-	(0x03<<18) | 0x30142,
-	(0x04<<18) | 0x0b333,
-	(0x05<<18) | 0x289A6,
-	(0x06<<18) | 0x18008,
-	(0x07<<18) | 0x38000,
-	(0x08<<18) | 0x05100,
-	(0x09<<18) | 0x24f08,
-	(0x0A<<18) | 0x14000,
-	(0x0B<<18) | 0x37d80,
-	(0x0C<<18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
-};
-
-static u32 max2825_channel_data_24[][3] = {
-	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 01 */
-	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 02 */
-	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 03 */
-	{(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 04 */
-	{(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 05 */
-	{(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 06 */
-	{(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 07 */
-	{(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 08 */
-	{(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 09 */
-	{(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 10 */
-	{(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 11 */
-	{(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 12 */
-	{(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 13 */
-	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
-};
-
-static u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
-
-/* ========================================== */
-/* MAX2827 (a/b/g) */
-static u32 max2827_rf_data[] = {
-	(0x00 << 18) | 0x000a2,
-	(0x01 << 18) | 0x21cc0,
-	(0x02 << 18) | 0x13806,
-	(0x03 << 18) | 0x30142,
-	(0x04 << 18) | 0x0b333,
-	(0x05 << 18) | 0x289A6,
-	(0x06 << 18) | 0x18008,
-	(0x07 << 18) | 0x38000,
-	(0x08 << 18) | 0x05100,
-	(0x09 << 18) | 0x24f08,
-	(0x0A << 18) | 0x14000,
-	(0x0B << 18) | 0x37d80,
-	(0x0C << 18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
-};
-
-static u32 max2827_channel_data_24[][3] = {
-	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
-	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
-	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
-	{(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
-	{(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
-	{(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
-	{(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
-	{(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
-	{(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
-	{(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
-	{(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
-	{(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
-	{(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
-	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
-};
-
-static u32 max2827_channel_data_50[][3] = {
-	{(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 36 */
-	{(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 40 */
-	{(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}, /* channel 44 */
-	{(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2A9A6}, /* channel 48 */
-	{(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x2A9A6}, /* channel 52 */
-	{(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 56 */
-	{(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 60 */
-	{(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}  /* channel 64 */
-};
-
-static u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100};
-static u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300};
-
-/* ======================================================= */
-/* MAX2828 (a/b/g) */
-static u32 max2828_rf_data[] = {
-	(0x00 << 18) | 0x000a2,
-	(0x01 << 18) | 0x21cc0,
-	(0x02 << 18) | 0x13806,
-	(0x03 << 18) | 0x30142,
-	(0x04 << 18) | 0x0b333,
-	(0x05 << 18) | 0x289A6,
-	(0x06 << 18) | 0x18008,
-	(0x07 << 18) | 0x38000,
-	(0x08 << 18) | 0x05100,
-	(0x09 << 18) | 0x24f08,
-	(0x0A << 18) | 0x14000,
-	(0x0B << 18) | 0x37d80,
-	(0x0C << 18) | 0x0c100   /* 11a: 0x0c300, 11g: 0x0c100 */
-};
-
-static u32 max2828_channel_data_24[][3] = {
-	{(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
-	{(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
-	{(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
-	{(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
-	{(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
-	{(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
-	{(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
-	{(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
-	{(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
-	{(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
-	{(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
-	{(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
-	{(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
-	{(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}  /* channel 14 (2484MHz) */
-};
-
-static u32 max2828_channel_data_50[][3] = {
-	{(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 36 */
-	{(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 40 */
-	{(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 44 */
-	{(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}, /* channel 48 */
-	{(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x289A6}, /* channel 52 */
-	{(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 56 */
-	{(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 60 */
-	{(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}  /* channel 64 */
-};
-
-static u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
-static u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
-
-/* ========================================================== */
-/* MAX2829 (a/b/g) */
-static u32 max2829_rf_data[] = {
-	(0x00 << 18) | 0x000a2,
-	(0x01 << 18) | 0x23520,
-	(0x02 << 18) | 0x13802,
-	(0x03 << 18) | 0x30142,
-	(0x04 << 18) | 0x0b333,
-	(0x05 << 18) | 0x28906,
-	(0x06 << 18) | 0x18008,
-	(0x07 << 18) | 0x3B500,
-	(0x08 << 18) | 0x05100,
-	(0x09 << 18) | 0x24f08,
-	(0x0A << 18) | 0x14000,
-	(0x0B << 18) | 0x37d80,
-	(0x0C << 18) | 0x0F300 /* TXVGA=51, (MAX-6 dB) */
-};
-
-static u32 max2829_channel_data_24[][3] = {
-	{(3 << 18) | 0x30142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 01 (2412MHz) */
-	{(3 << 18) | 0x32141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6},  /* 02 (2417MHz) */
-	{(3 << 18) | 0x32143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6},  /* 03 (2422MHz) */
-	{(3 << 18) | 0x32142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 04 (2427MHz) */
-	{(3 << 18) | 0x31141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6},  /* 05 (2432MHz) */
-	{(3 << 18) | 0x31143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6},  /* 06 (2437MHz) */
-	{(3 << 18) | 0x31142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 07 (2442MHz) */
-	{(3 << 18) | 0x33141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6},  /* 08 (2447MHz) */
-	{(3 << 18) | 0x33143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6},  /* 09 (2452MHz) */
-	{(3 << 18) | 0x33142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 10 (2457MHz) */
-	{(3 << 18) | 0x30941, (4 << 18) | 0x08444, (5 << 18) | 0x289C6},  /* 11 (2462MHz) */
-	{(3 << 18) | 0x30943, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6},  /* 12 (2467MHz) */
-	{(3 << 18) | 0x30942, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6},  /* 13 (2472MHz) */
-	{(3 << 18) | 0x32941, (4 << 18) | 0x09999, (5 << 18) | 0x289C6},  /* 14 (2484MHz) */
-};
-
-static u32 max2829_channel_data_50[][4] = {
-	{36, (3 << 18) | 0x33cc3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 36 (5.180GHz) */
-	{40, (3 << 18) | 0x302c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 40 (5.200GHz) */
-	{44, (3 << 18) | 0x302c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 44 (5.220GHz) */
-	{48, (3 << 18) | 0x322c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 48 (5.240GHz) */
-	{52, (3 << 18) | 0x312c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 52 (5.260GHz) */
-	{56, (3 << 18) | 0x332c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 56 (5.280GHz) */
-	{60, (3 << 18) | 0x30ac0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 60 (5.300GHz) */
-	{64, (3 << 18) | 0x30ac2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 64 (5.320GHz) */
-
-	{100, (3 << 18) | 0x30ec0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 100 (5.500GHz) */
-	{104, (3 << 18) | 0x30ec2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 104 (5.520GHz) */
-	{108, (3 << 18) | 0x32ec1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 108 (5.540GHz) */
-	{112, (3 << 18) | 0x31ec1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 112 (5.560GHz) */
-	{116, (3 << 18) | 0x33ec3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 116 (5.580GHz) */
-	{120, (3 << 18) | 0x301c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 120 (5.600GHz) */
-	{124, (3 << 18) | 0x301c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 124 (5.620GHz) */
-	{128, (3 << 18) | 0x321c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 128 (5.640GHz) */
-	{132, (3 << 18) | 0x311c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 132 (5.660GHz) */
-	{136, (3 << 18) | 0x331c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 136 (5.680GHz) */
-	{140, (3 << 18) | 0x309c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 140 (5.700GHz) */
-
-	{149, (3 << 18) | 0x329c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 149 (5.745GHz) */
-	{153, (3 << 18) | 0x319c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 153 (5.765GHz) */
-	{157, (3 << 18) | 0x339c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 157 (5.785GHz) */
-	{161, (3 << 18) | 0x305c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 161 (5.805GHz) */
-
-	/* Japan */
-	{ 184, (3 << 18) | 0x308c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 184 (4.920GHz) */
-	{ 188, (3 << 18) | 0x328c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 188 (4.940GHz) */
-	{ 192, (3 << 18) | 0x318c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 192 (4.960GHz) */
-	{ 196, (3 << 18) | 0x338c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 196 (4.980GHz) */
-	{   8, (3 << 18) | 0x324c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /*   8 (5.040GHz) */
-	{  12, (3 << 18) | 0x314c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /*  12 (5.060GHz) */
-	{  16, (3 << 18) | 0x334c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /*  16 (5.080GHz) */
-	{  34, (3 << 18) | 0x31cc2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /*  34 (5.170GHz) */
-	{  38, (3 << 18) | 0x33cc1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /*  38 (5.190GHz) */
-	{  42, (3 << 18) | 0x302c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /*  42 (5.210GHz) */
-	{  46, (3 << 18) | 0x322c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /*  46 (5.230GHz) */
-};
-
-/*
- * ====================================================================
- * For MAXIM2825/6/7 Ver. 317 or less
- *
- * 0x00 0x00080
- * 0x01 0x214c0
- * 0x02 0x13802
- *
- * 2.4GHz Channels
- * channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
- * channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
- * channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
- * channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
- * channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
- * channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
- * channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
- * channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
- * channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
- * channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
- * channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
- * channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
- * channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
- *
- * 5.0Ghz Channels
- * channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
- * channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
- * channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
- * channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
- * channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
- * channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
- * channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
- * channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
- *
- * 2.4GHz band ; 0x05 0x28986;
- * 5.0GHz band ; 0x05 0x2a986
- * 0x06 0x18008
- * 0x07 0x38400
- * 0x08 0x05108
- * 0x09 0x27ff8
- * 0x0a 0x14000
- * 0x0b 0x37f99
- * 0x0c 0x0c000
- * ====================================================================
- */
-
-/*
- * ===================================================================
- * AL2230 MP (Mass Production Version)
- * RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
- * 20-bit length and LSB first
- *
- * Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
- * Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
- * Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
- * Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
- * Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
- * Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
- * Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
- * Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
- * Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
- * Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
- * Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
- * Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
- * Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
- * Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
- *
- * 0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
- * 0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
- *
- * 0x03 0xCFFF0
- * 0x04 0x23800
- * 0x05 0xA3B72
- * 0x06 0x6DA01
- * 0x07 0xE1688
- * 0x08 0x11600
- * 0x09 0x99E02
- * 0x0A 0x5DDB0
- * 0x0B 0xD9900
- * 0x0C 0x3FFBD
- * 0x0D 0xB0000
- * 0x0F 0xF00A0
- *
- * RF Calibration for Airoha AL2230
- *
- * 0x0f 0xf00a0 ; Initial Setting
- * 0x0f 0xf00b0 ; Activate TX DCC
- * 0x0f 0xf02a0 ; Activate Phase Calibration
- * 0x0f 0xf00e0 ; Activate Filter RC Calibration
- * 0x0f 0xf00a0 ; Restore Initial Setting
- * ==================================================================
- */
-static u32 al2230_rf_data[] = {
-	(0x00 << 20) | 0x09EFC,
-	(0x01 << 20) | 0x8CCCC,
-	(0x02 << 20) | 0x40058,
-	(0x03 << 20) | 0xCFFF0,
-	(0x04 << 20) | 0x24100,
-	(0x05 << 20) | 0xA3B2F,
-	(0x06 << 20) | 0x6DA01,
-	(0x07 << 20) | 0xE3628,
-	(0x08 << 20) | 0x11600,
-	(0x09 << 20) | 0x9DC02,
-	(0x0A << 20) | 0x5ddb0,
-	(0x0B << 20) | 0xD9900,
-	(0x0C << 20) | 0x3FFBD,
-	(0x0D << 20) | 0xB0000,
-	(0x0F << 20) | 0xF01A0
-};
-
-static u32 al2230s_rf_data[] = {
-	(0x00 << 20) | 0x09EFC,
-	(0x01 << 20) | 0x8CCCC,
-	(0x02 << 20) | 0x40058,
-	(0x03 << 20) | 0xCFFF0,
-	(0x04 << 20) | 0x24100,
-	(0x05 << 20) | 0xA3B2F,
-	(0x06 << 20) | 0x6DA01,
-	(0x07 << 20) | 0xE3628,
-	(0x08 << 20) | 0x11600,
-	(0x09 << 20) | 0x9DC02,
-	(0x0A << 20) | 0x5DDB0,
-	(0x0B << 20) | 0xD9900,
-	(0x0C << 20) | 0x3FFBD,
-	(0x0D << 20) | 0xB0000,
-	(0x0F << 20) | 0xF01A0
-};
-
-static u32 al2230_channel_data_24[][2] = {
-	{(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 01 */
-	{(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 02 */
-	{(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 03 */
-	{(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 04 */
-	{(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 05 */
-	{(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 06 */
-	{(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 07 */
-	{(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 08 */
-	{(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCC}, /* channe1 09 */
-	{(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCD}, /* channe1 10 */
-	{(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCC}, /* channe1 11 */
-	{(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCD}, /* channe1 12 */
-	{(0x00 << 20) | 0x03EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 13 */
-	{(0x00 << 20) | 0x03E7C, (0x01 << 20) | 0x86666}  /* channe1 14 */
-};
-
-/* Current setting. u32 airoha_power_data_24[] = {(0x09 << 20) | 0x90202, (0x09 << 20) | 0x96602, (0x09 << 20) | 0x97602}; */
-#define AIROHA_TXVGA_LOW_INDEX		31	/* Index for 0x90202 */
-#define AIROHA_TXVGA_MIDDLE_INDEX	12	/* Index for 0x96602 */
-#define AIROHA_TXVGA_HIGH_INDEX		8	/* Index for 0x97602 1.0.24.0 1.0.28.0 */
-
-static u32 al2230_txvga_data[][2] = {
-	/* value , index */
-	{0x090202, 0},
-	{0x094202, 2},
-	{0x092202, 4},
-	{0x096202, 6},
-	{0x091202, 8},
-	{0x095202, 10},
-	{0x093202, 12},
-	{0x097202, 14},
-	{0x090A02, 16},
-	{0x094A02, 18},
-	{0x092A02, 20},
-	{0x096A02, 22},
-	{0x091A02, 24},
-	{0x095A02, 26},
-	{0x093A02, 28},
-	{0x097A02, 30},
-	{0x090602, 32},
-	{0x094602, 34},
-	{0x092602, 36},
-	{0x096602, 38},
-	{0x091602, 40},
-	{0x095602, 42},
-	{0x093602, 44},
-	{0x097602, 46},
-	{0x090E02, 48},
-	{0x098E02, 49},
-	{0x094E02, 50},
-	{0x09CE02, 51},
-	{0x092E02, 52},
-	{0x09AE02, 53},
-	{0x096E02, 54},
-	{0x09EE02, 55},
-	{0x091E02, 56},
-	{0x099E02, 57},
-	{0x095E02, 58},
-	{0x09DE02, 59},
-	{0x093E02, 60},
-	{0x09BE02, 61},
-	{0x097E02, 62},
-	{0x09FE02, 63}
-};
-
-/*
- * ==========================================
- * For Airoha AL7230, 2.4Ghz band
- * 24bit, MSB first
- */
-
-/* channel independent registers: */
-static u32 al7230_rf_data_24[]	= {
-	(0x00 << 24) | 0x003790,
-	(0x01 << 24) | 0x133331,
-	(0x02 << 24) | 0x841FF2,
-	(0x03 << 24) | 0x3FDFA3,
-	(0x04 << 24) | 0x7FD784,
-	(0x05 << 24) | 0x802B55,
-	(0x06 << 24) | 0x56AF36,
-	(0x07 << 24) | 0xCE0207,
-	(0x08 << 24) | 0x6EBC08,
-	(0x09 << 24) | 0x221BB9,
-	(0x0A << 24) | 0xE0000A,
-	(0x0B << 24) | 0x08071B,
-	(0x0C << 24) | 0x000A3C,
-	(0x0D << 24) | 0xFFFFFD,
-	(0x0E << 24) | 0x00000E,
-	(0x0F << 24) | 0x1ABA8F
-};
-
-static u32 al7230_channel_data_24[][2] = {
-	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x133331}, /* channe1 01 */
-	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x1B3331}, /* channe1 02 */
-	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x033331}, /* channe1 03 */
-	{(0x00 << 24) | 0x003790, (0x01 << 24) | 0x0B3331}, /* channe1 04 */
-	{(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x133331}, /* channe1 05 */
-	{(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x1B3331}, /* channe1 06 */
-	{(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x033331}, /* channe1 07 */
-	{(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x0B3331}, /* channe1 08 */
-	{(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x133331}, /* channe1 09 */
-	{(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x1B3331}, /* channe1 10 */
-	{(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x033331}, /* channe1 11 */
-	{(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x0B3331}, /* channe1 12 */
-	{(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x133331}, /* channe1 13 */
-	{(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x066661}  /* channel 14 */
-};
-
-/* channel independent registers: */
-static u32 al7230_rf_data_50[]	= {
-	(0x00 << 24) | 0x0FF520,
-	(0x01 << 24) | 0x000001,
-	(0x02 << 24) | 0x451FE2,
-	(0x03 << 24) | 0x5FDFA3,
-	(0x04 << 24) | 0x6FD784,
-	(0x05 << 24) | 0x853F55,
-	(0x06 << 24) | 0x56AF36,
-	(0x07 << 24) | 0xCE0207,
-	(0x08 << 24) | 0x6EBC08,
-	(0x09 << 24) | 0x221BB9,
-	(0x0A << 24) | 0xE0600A,
-	(0x0B << 24) | 0x08044B,
-	(0x0C << 24) | 0x00143C,
-	(0x0D << 24) | 0xFFFFFD,
-	(0x0E << 24) | 0x00000E,
-	(0x0F << 24) | 0x12BACF  /* 5Ghz default state */
-};
-
-static u32 al7230_channel_data_5[][4] = {
-	/* channel dependent registers: 0x00, 0x01 and 0x04 */
-	/* 11J =========== */
-	{184, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 184 */
-	{188, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 188 */
-	{192, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 192 */
-	{196, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 196 */
-	{8,   (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 008 */
-	{12,  (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 012 */
-	{16,  (0x00 << 24) | 0x0FF550, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 016 */
-	{34,  (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 034 */
-	{38,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x100001, (0x04 << 24) | 0x77F784}, /* channel 038 */
-	{42,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x1AAAA1, (0x04 << 24) | 0x77F784}, /* channel 042 */
-	{46,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 046 */
-	/* 11 A/H ========= */
-	{36,  (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 036 */
-	{40,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 040 */
-	{44,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 044 */
-	{48,  (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 048 */
-	{52,  (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 052 */
-	{56,  (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 056 */
-	{60,  (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 060 */
-	{64,  (0x00 << 24) | 0x0FF590, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 064 */
-	{100, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 100 */
-	{104, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 104 */
-	{108, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 108 */
-	{112, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 112 */
-	{116, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 116 */
-	{120, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 120 */
-	{124, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 124 */
-	{128, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 128 */
-	{132, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 132 */
-	{136, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 136 */
-	{140, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 140 */
-	{149, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 149 */
-	{153, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784}, /* channel 153 */
-	{157, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x0D5551, (0x04 << 24) | 0x77F784}, /* channel 157 */
-	{161, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 161 */
-	{165, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784}  /* channel 165 */
-};
-
-/*
- * RF Calibration <=== Register 0x0F
- * 0x0F 0x1ABA8F; start from 2.4Ghz default state
- * 0x0F 0x9ABA8F; TXDC compensation
- * 0x0F 0x3ABA8F; RXFIL adjustment
- * 0x0F 0x1ABA8F; restore 2.4Ghz default state
- */
-
-/* TXVGA Mapping Table <=== Register 0x0B */
-static u32 al7230_txvga_data[][2] = {
-	{0x08040B, 0}, /* TXVGA = 0; */
-	{0x08041B, 1}, /* TXVGA = 1; */
-	{0x08042B, 2}, /* TXVGA = 2; */
-	{0x08043B, 3}, /* TXVGA = 3; */
-	{0x08044B, 4}, /* TXVGA = 4; */
-	{0x08045B, 5}, /* TXVGA = 5; */
-	{0x08046B, 6}, /* TXVGA = 6; */
-	{0x08047B, 7}, /* TXVGA = 7; */
-	{0x08048B, 8}, /* TXVGA = 8; */
-	{0x08049B, 9}, /* TXVGA = 9; */
-	{0x0804AB, 10}, /* TXVGA = 10; */
-	{0x0804BB, 11}, /* TXVGA = 11; */
-	{0x0804CB, 12}, /* TXVGA = 12; */
-	{0x0804DB, 13}, /* TXVGA = 13; */
-	{0x0804EB, 14}, /* TXVGA = 14; */
-	{0x0804FB, 15}, /* TXVGA = 15; */
-	{0x08050B, 16}, /* TXVGA = 16; */
-	{0x08051B, 17}, /* TXVGA = 17; */
-	{0x08052B, 18}, /* TXVGA = 18; */
-	{0x08053B, 19}, /* TXVGA = 19; */
-	{0x08054B, 20}, /* TXVGA = 20; */
-	{0x08055B, 21}, /* TXVGA = 21; */
-	{0x08056B, 22}, /* TXVGA = 22; */
-	{0x08057B, 23}, /* TXVGA = 23; */
-	{0x08058B, 24}, /* TXVGA = 24; */
-	{0x08059B, 25}, /* TXVGA = 25; */
-	{0x0805AB, 26}, /* TXVGA = 26; */
-	{0x0805BB, 27}, /* TXVGA = 27; */
-	{0x0805CB, 28}, /* TXVGA = 28; */
-	{0x0805DB, 29}, /* TXVGA = 29; */
-	{0x0805EB, 30}, /* TXVGA = 30; */
-	{0x0805FB, 31}, /* TXVGA = 31; */
-	{0x08060B, 32}, /* TXVGA = 32; */
-	{0x08061B, 33}, /* TXVGA = 33; */
-	{0x08062B, 34}, /* TXVGA = 34; */
-	{0x08063B, 35}, /* TXVGA = 35; */
-	{0x08064B, 36}, /* TXVGA = 36; */
-	{0x08065B, 37}, /* TXVGA = 37; */
-	{0x08066B, 38}, /* TXVGA = 38; */
-	{0x08067B, 39}, /* TXVGA = 39; */
-	{0x08068B, 40}, /* TXVGA = 40; */
-	{0x08069B, 41}, /* TXVGA = 41; */
-	{0x0806AB, 42}, /* TXVGA = 42; */
-	{0x0806BB, 43}, /* TXVGA = 43; */
-	{0x0806CB, 44}, /* TXVGA = 44; */
-	{0x0806DB, 45}, /* TXVGA = 45; */
-	{0x0806EB, 46}, /* TXVGA = 46; */
-	{0x0806FB, 47}, /* TXVGA = 47; */
-	{0x08070B, 48}, /* TXVGA = 48; */
-	{0x08071B, 49}, /* TXVGA = 49; */
-	{0x08072B, 50}, /* TXVGA = 50; */
-	{0x08073B, 51}, /* TXVGA = 51; */
-	{0x08074B, 52}, /* TXVGA = 52; */
-	{0x08075B, 53}, /* TXVGA = 53; */
-	{0x08076B, 54}, /* TXVGA = 54; */
-	{0x08077B, 55}, /* TXVGA = 55; */
-	{0x08078B, 56}, /* TXVGA = 56; */
-	{0x08079B, 57}, /* TXVGA = 57; */
-	{0x0807AB, 58}, /* TXVGA = 58; */
-	{0x0807BB, 59}, /* TXVGA = 59; */
-	{0x0807CB, 60}, /* TXVGA = 60; */
-	{0x0807DB, 61}, /* TXVGA = 61; */
-	{0x0807EB, 62}, /* TXVGA = 62; */
-	{0x0807FB, 63}, /* TXVGA = 63; */
-};
-/* ============================================= */
-
-/*
- * W89RF242 RFIC SPI programming initial data
- * Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
- */
-static u32 w89rf242_rf_data[] = {
-	(0x00 << 24) | 0xF86100, /* 3E184; MODA  (0x00) -- Normal mode ; calibration off */
-	(0x01 << 24) | 0xEFFFC2, /* 3BFFF; MODB  (0x01) -- turn off RSSI, and other circuits are turned on */
-	(0x02 << 24) | 0x102504, /* 04094; FSET  (0x02) -- default 20MHz crystal ; Icmp=1.5mA */
-	(0x03 << 24) | 0x026286, /* 0098A; FCHN  (0x03) -- default CH7, 2442MHz */
-	(0x04 << 24) | 0x000208, /* 02008; FCAL  (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C */
-	(0x05 << 24) | 0x24C60A, /* 09316; GANA  (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D */
-	(0x06 << 24) | 0x3432CC, /* 0D0CB; GANB  (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input */
-	(0x07 << 24) | 0x0C68CE, /* 031A3; FILT  (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100 */
-	(0x08 << 24) | 0x100010, /* 04000; TCAL  (0x08) -- for LO */
-	(0x09 << 24) | 0x004012, /* 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C) */
-	(0x0A << 24) | 0x704014, /* 1C100; RCALB (0x0A) */
-	(0x0B << 24) | 0x18BDD6, /* 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B */
-	(0x0C << 24) | 0x575558, /* 15D55 ; IBSA  (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner */
-	(0x0D << 24) | 0x55545A, /* 15555 ; IBSB  (0x0D) */
-	(0x0E << 24) | 0x5557DC, /* 1555F ; IBSC  (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */
-	(0x10 << 24) | 0x000C20, /* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */
-	(0x11 << 24) | 0x0C0022, /* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */
-	(0x12 << 24) | 0x000024  /* TMODC (0x12) -- Turn OFF Temperature sensor */
-};
-
-static u32 w89rf242_channel_data_24[][2] = {
-	{(0x03 << 24) | 0x025B06, (0x04 << 24) | 0x080408}, /* channe1 01 */
-	{(0x03 << 24) | 0x025C46, (0x04 << 24) | 0x080408}, /* channe1 02 */
-	{(0x03 << 24) | 0x025D86, (0x04 << 24) | 0x080408}, /* channe1 03 */
-	{(0x03 << 24) | 0x025EC6, (0x04 << 24) | 0x080408}, /* channe1 04 */
-	{(0x03 << 24) | 0x026006, (0x04 << 24) | 0x080408}, /* channe1 05 */
-	{(0x03 << 24) | 0x026146, (0x04 << 24) | 0x080408}, /* channe1 06 */
-	{(0x03 << 24) | 0x026286, (0x04 << 24) | 0x080408}, /* channe1 07 */
-	{(0x03 << 24) | 0x0263C6, (0x04 << 24) | 0x080408}, /* channe1 08 */
-	{(0x03 << 24) | 0x026506, (0x04 << 24) | 0x080408}, /* channe1 09 */
-	{(0x03 << 24) | 0x026646, (0x04 << 24) | 0x080408}, /* channe1 10 */
-	{(0x03 << 24) | 0x026786, (0x04 << 24) | 0x080408}, /* channe1 11 */
-	{(0x03 << 24) | 0x0268C6, (0x04 << 24) | 0x080408}, /* channe1 12 */
-	{(0x03 << 24) | 0x026A06, (0x04 << 24) | 0x080408}, /* channe1 13 */
-	{(0x03 << 24) | 0x026D06, (0x04 << 24) | 0x080408}  /* channe1 14 */
-};
-
-static u32 w89rf242_txvga_old_mapping[][2] = {
-	{0, 0} , /* New <-> Old */
-	{1, 1} ,
-	{2, 2} ,
-	{3, 3} ,
-	{4, 4} ,
-	{6, 5} ,
-	{8, 6},
-	{10, 7},
-	{12, 8},
-	{14, 9},
-	{16, 10},
-	{18, 11},
-	{20, 12},
-	{22, 13},
-	{24, 14},
-	{26, 15},
-	{28, 16},
-	{30, 17},
-	{32, 18},
-	{34, 19},
-};
-
-static u32 w89rf242_txvga_data[][5] = {
-	/* low gain mode */
-	{(0x05 << 24) | 0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131}, /* min gain */
-	{(0x05 << 24) | 0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131},
-	{(0x05 << 24) | 0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131}, /*  (default) +14dBm (ANT) */
-	{(0x05 << 24) | 0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131},
-
-	/* TXVGA=0x10 */
-	{(0x05 << 24) | 0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838},
-	{(0x05 << 24) | 0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B},
-
-	/* TXVGA=0x11 */
-	{ (0x05 << 24) | 0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333},
-	{ (0x05 << 24) | 0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737},
-
-	/* TXVGA=0x12 */
-	{(0x05 << 24) | 0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030},
-	{(0x05 << 24) | 0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434},
-
-	/* TXVGA=0x13 */
-	{(0x05 << 24) | 0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030},
-	{(0x05 << 24) | 0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232},
-
-	/* TXVGA=0x14 */
-	{(0x05 << 24) | 0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131},
-	{(0x05 << 24) | 0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434},
-
-	/* TXVGA=0x15 */
-	{(0x05 << 24) | 0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131},
-	{(0x05 << 24) | 0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434},
-
-	/* TXVGA=0x16 */
-	{(0x05 << 24) | 0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131},
-	{(0x05 << 24) | 0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535},
-
-	/* TXVGA=0x17 */
-	{(0x05 << 24) | 0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F},
-	{(0x05 << 24) | 0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131},
-
-	/* TXVGA=0x18 */
-	{(0x05 << 24) | 0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E},
-	{(0x05 << 24) | 0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030},
-
-	/* TXVGA=0x19 */
-	{(0x05 << 24) | 0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D},
-	{(0x05 << 24) | 0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030},
-
-	/* TXVGA=0x1A */
-	{(0x05 << 24) | 0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E},
-	{(0x05 << 24) | 0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131},
-
-	/* TXVGA=0x1B */
-	{(0x05 << 24) | 0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030},
-	{(0x05 << 24) | 0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434},
-
-	/* TXVGA=0x1C */
-	{(0x05 << 24) | 0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131},
-	{(0x05 << 24) | 0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636},
-
-	/* TXVGA=0x1D */
-	{(0x05 << 24) | 0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737},
-	{(0x05 << 24) | 0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B},
-
-	/* TXVGA=0x1E */
-	{(0x05 << 24) | 0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B},
-	{(0x05 << 24) | 0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141},
-
-	/* TXVGA=0x1F */
-	{(0x05 << 24) | 0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242}
-};
-
-/* ================================================================================================== */
-
-
-
-/*
- * =============================================================================================================
- *  Uxx_ReadEthernetAddress --
- *
- *  Routine Description:
- *    Reads in the Ethernet address from the IC.
- *
- *  Arguments:
- *    pHwData        - The pHwData structure
- *
- *  Return Value:
- *
- *    The address is stored in EthernetIDAddr.
- * =============================================================================================================
- */
-void Uxx_ReadEthernetAddress(struct hw_data *pHwData)
-{
-	u32	ltmp;
-
-	/*
-	 * Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
-	 * Only unplug and plug again can make hardware read EEPROM again.
-	 */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08000000); /* Start EEPROM access + Read + address(0x0d) */
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
-	*(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16) ltmp);
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08010000); /* Start EEPROM access + Read + address(0x0d) */
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
-	*(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16) ltmp);
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08020000); /* Start EEPROM access + Read + address(0x0d) */
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
-	*(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16) ltmp);
-	*(u16 *)(pHwData->PermanentMacAddress + 6) = 0;
-	Wb35Reg_WriteSync(pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress));
-	Wb35Reg_WriteSync(pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress + 4)));
-}
-
-
-/*
- * ===============================================================================================================
- *  CardGetMulticastBit --
- *  Description:
- *    For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
- *    Calls CardComputeCrc() to determine the CRC value.
- *  Arguments:
- *    Address - the address
- *    Byte - the byte that it hashes to
- *    Value - will have a 1 in the relevant bit
- *  Return Value:
- *    None.
- * ==============================================================================================================
- */
-void CardGetMulticastBit(u8 Address[ETH_ALEN], u8 *Byte, u8 *Value)
-{
-	u32 Crc;
-	u32 BitNumber;
-
-	/* First compute the CRC. */
-	Crc = CardComputeCrc(Address, ETH_ALEN);
-
-	/* The computed CRC is bit0~31 from left to right */
-	/* At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128 */
-	BitNumber = (u32) ((Crc >> 26) & 0x3f);
-
-	*Byte  = (u8) (BitNumber >> 3); /* 900514 original (BitNumber / 8) */
-	*Value = (u8) ((u8) 1 << (BitNumber % 8));
-}
-
-void Uxx_power_on_procedure(struct hw_data *pHwData)
-{
-	u32	ltmp, loop;
-
-	if (pHwData->phy_type <= RF_MAXIM_V1)
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
-	else {
-		Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
-		msleep(10);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
-		msleep(10);
-		ltmp = 0x4968;
-		if ((pHwData->phy_type == RF_WB_242) ||
-			(RF_WB_242_1 == pHwData->phy_type))
-			ltmp = 0x4468;
-
-		Wb35Reg_WriteSync(pHwData, 0x03d0, ltmp);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
-
-		msleep(20);
-		Wb35Reg_ReadSync(pHwData, 0x03d0, &ltmp);
-		loop = 500; /* Wait for 5 second */
-		while (!(ltmp & 0x20) && loop--) {
-			msleep(10);
-			if (!Wb35Reg_ReadSync(pHwData, 0x03d0, &ltmp))
-				break;
-		}
-
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
-	}
-
-	Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
-	msleep(10);
-
-	/* Set burst write delay */
-	Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
-}
-
-static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp,
-					char number)
-{
-	u8	i;
-	for (i = 0; i < number; i++) {
-		pHwData->phy_para[i] = al7230_rf_data_24[i];
-		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i] & 0xffffff);
-	}
-}
-
-static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp,
-					char number)
-{
-	u8	i;
-	for (i = 0; i < number; i++) {
-		pHwData->phy_para[i] = al7230_rf_data_50[i];
-		pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i] & 0xffffff);
-	}
-}
-
-
-/*
- * =============================================================================================================
- * RFSynthesizer_initial --
- * =============================================================================================================
- */
-void RFSynthesizer_initial(struct hw_data *pHwData)
-{
-	u32	altmp[32];
-	u32	*pltmp = altmp;
-	u32	ltmp;
-	u8	number = 0x00; /* The number of register vale */
-	u8	i;
-
-	/*
-	 * bit[31]      SPI Enable.
-	 *              1=perform synthesizer program operation. This bit will
-	 *              cleared automatically after the operation is completed.
-	 * bit[30]      SPI R/W Control
-	 *              0=write,    1=read
-	 * bit[29:24]   SPI Data Format Length
-	 * bit[17:4 ]   RF Data bits.
-	 * bit[3 :0 ]   RF address.
-	 */
-	switch (pHwData->phy_type) {
-	case RF_MAXIM_2825:
-	case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
-		number = ARRAY_SIZE(max2825_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
-		}
-		break;
-	case RF_MAXIM_2827:
-		number = ARRAY_SIZE(max2827_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = max2827_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
-		}
-		break;
-	case RF_MAXIM_2828:
-		number = ARRAY_SIZE(max2828_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = max2828_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
-		}
-		break;
-	case RF_MAXIM_2829:
-		number = ARRAY_SIZE(max2829_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = max2829_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
-		}
-		break;
-	case RF_AIROHA_2230:
-		number = ARRAY_SIZE(al2230_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = al2230_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
-		}
-		break;
-	case RF_AIROHA_2230S:
-		number = ARRAY_SIZE(al2230s_rf_data);
-		for (i = 0; i < number; i++) {
-			pHwData->phy_para[i] = al2230s_rf_data[i];
-			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
-		}
-		break;
-	case RF_AIROHA_7230:
-		/* Start to fill RF parameters, PLL_ON should be pulled low. */
-		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
-		pr_debug("* PLL_ON    low\n");
-		number = ARRAY_SIZE(al7230_rf_data_24);
-		Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
-		break;
-	case RF_WB_242:
-	case RF_WB_242_1:
-		number = ARRAY_SIZE(w89rf242_rf_data);
-		for (i = 0; i < number; i++) {
-			ltmp = w89rf242_rf_data[i];
-			if (i == 4) { /* Update the VCO trim from EEPROM */
-				ltmp &= ~0xff0; /* Mask bit4 ~bit11 */
-				ltmp |= pHwData->VCO_trim << 4;
-			}
-
-			pHwData->phy_para[i] = ltmp;
-			pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(ltmp, 24);
-		}
-		break;
-	}
-
-	pHwData->phy_number = number;
-
-	/* The 16 is the maximum capability of hardware. Here use 12 */
-	if (number > 12) {
-		for (i = 0; i < 12; i++) /* For Al2230 */
-			Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
-
-		pltmp += 12;
-		number -= 12;
-	}
-
-	/* Write to register. number must less and equal than 16 */
-	for (i = 0; i < number; i++)
-		Wb35Reg_WriteSync(pHwData, 0x864, pltmp[i]);
-
-	/* Calibration only 1 time */
-	if (pHwData->CalOneTime)
-		return;
-	pHwData->CalOneTime = 1;
-
-	switch (pHwData->phy_type) {
-	case RF_AIROHA_2230:
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(10);
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(10);
-	case RF_AIROHA_2230S:
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
-		msleep(10);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
-		msleep(10);
-		Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
-		Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
-		msleep(10);
-		/* ========================================================= */
-
-		/* The follow code doesn't use the burst-write mode */
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F<<20) | 0xF01A0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		ltmp = pHwData->reg.BB5C & 0xfffff000;
-		Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
-		pHwData->reg.BB50 |= 0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START) */
-		Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-		msleep(5);
-
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-
-		ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
-		pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
-		Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-		break;
-	case RF_AIROHA_7230:
-		/* RF parameters have filled completely, PLL_ON should be pulled high */
-		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
-		pr_debug("* PLL_ON    high\n");
-
-		/* 2.4GHz */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-
-		/* 5GHz */
-		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
-		pr_debug("* PLL_ON    low\n");
-
-		number = ARRAY_SIZE(al7230_rf_data_50);
-		Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
-		/* Write to register. number must less and equal than 16 */
-		for (i = 0; i < number; i++)
-			Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
-		msleep(5);
-
-		Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
-		pr_debug("* PLL_ON    high\n");
-
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		break;
-	case RF_WB_242:
-	case RF_WB_242_1:
-		 /* for FA5976A */
-		ltmp = pHwData->reg.BB5C & 0xfffff000;
-		Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
-		Wb35Reg_WriteSync(pHwData, 0x1058, 0);
-		pHwData->reg.BB50 |= 0x3; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
-		Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-
-		/* ----- Calibration (1). VCO frequency calibration */
-		/* Calibration (1a.0). Synthesizer reset */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		/* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
-
-		/* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */
-		/* Calibration (2a). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default) */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (2b). send TX reset signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00201E, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (2c). turn-on TX Gm-C filter auto-tuning */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFCEBC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		udelay(150); /* Sleep 150 us */
-		/* turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
-		/* Calibration (3a). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (3b). send RX reset signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		udelay(150); /* Sleep 150 us */
-		/* Calibration (3e). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* ----- Calibration (4). TX LO leakage calibration */
-		/* Calibration (4a). TX LO leakage calibration */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		udelay(150); /* Sleep 150 us */
-
-		/* ----- Calibration (5). RX DC offset calibration */
-		/* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5b). turn off AGC servo-loop & RSSI */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* for LNA=11 -------- */
-		/* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
-		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* for LNA=10 -------- */
-		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
-		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* for LNA=01 -------- */
-		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
-		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* for LNA=00 -------- */
-		/* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(2);
-		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		/* Calibration (5g). turn on AGC servo-loop */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-
-		/* ----- Calibration (7). Switch RF chip to normal mode */
-		/* 0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
-		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
-		msleep(5);
-		break;
-	}
-}
-
-static void BBProcessor_AL7230_2400(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	pltmp[12];
-
-	pltmp[0] = 0x16A8337A; /* 0x1000 AGC_Ctrl1 */
-	pltmp[1] = 0x9AFF9AA6; /* 0x1004 AGC_Ctrl2 */
-	pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
-	pltmp[3] = 0xFFF72031; /* 0x100c AGC_Ctrl4 */
-	reg->BB0C = 0xFFF72031;
-	pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
-	pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
-	pltmp[6] = 0xF2211111; /* 0x1018 AGC_Ctrl7 */
-	pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-	pltmp[8] = 0x06443440; /* 0x1020 AGC_Ctrl9 */
-	pltmp[9] = 0xA8002A79; /* 0x1024 AGC_Ctrl10 */
-	pltmp[10] = 0x40000528;
-	pltmp[11] = 0x232D7F30; /* 0x102c A_ACQ_Ctrl */
-	reg->BB2C = 0x232D7F30;
-	Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-	pltmp[0] = 0x00002c54; /* 0x1030 B_ACQ_Ctrl */
-	reg->BB30 = 0x00002c54;
-	pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-	pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
-	pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-	reg->BB3C = 0x00000000;
-	pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-	pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-	pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
-	pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
-	pltmp[8] = 0x2B106208; /* 0x1050 MODE_Ctrl */
-	reg->BB50 = 0x2B106208;
-	pltmp[9] = 0;		/* 0x1054 */
-	reg->BB54 = 0x00000000;
-	pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
-	reg->BB58 = 0x52524242;
-	pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-	Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-}
-
-static void BBProcessor_AL7230_5000(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	pltmp[12];
-
-	pltmp[0] = 0x16AA6678; /* 0x1000 AGC_Ctrl1 */
-	pltmp[1] = 0x9AFFA0B2; /* 0x1004 AGC_Ctrl2 */
-	pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
-	pltmp[3] = 0xEFFF233E; /* 0x100c AGC_Ctrl4 */
-	reg->BB0C = 0xEFFF233E;
-	pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
-	pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
-	pltmp[6] = 0xF2432111; /* 0x1018 AGC_Ctrl7 */
-	pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-	pltmp[8] = 0x05C43440; /* 0x1020 AGC_Ctrl9 */
-	pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-	pltmp[10] = 0x40000528;
-	pltmp[11] = 0x232FDF30;/* 0x102c A_ACQ_Ctrl */
-	reg->BB2C = 0x232FDF30;
-	Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-	pltmp[0] = 0x80002C7C; /* 0x1030 B_ACQ_Ctrl */
-	pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-	pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
-	pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-	reg->BB3C = 0x00000000;
-	pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-	pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-	pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
-	pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
-	pltmp[8] = 0x2B107208; /* 0x1050 MODE_Ctrl */
-	reg->BB50 = 0x2B107208;
-	pltmp[9] = 0;		/* 0x1054 */
-	reg->BB54 = 0x00000000;
-	pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
-	reg->BB58 = 0x52524242;
-	pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-	Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-}
-
-/*
- * ===========================================================================
- *  BBProcessorPowerupInit --
- *
- *  Description:
- *    Initialize the Baseband processor.
- *
- *  Arguments:
- *    pHwData    - Handle of the USB Device.
- *
- *  Return values:
- *    None.
- *============================================================================
- */
-void BBProcessor_initial(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	i, pltmp[12];
-
-	switch (pHwData->phy_type) {
-	case RF_MAXIM_V1: /* Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
-		pltmp[0] = 0x16F47E77; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9AFFAEA4; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xEFFF1A34; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xEFFF1A34;
-		pltmp[4] = 0x0FABE0B7; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x00CAA332; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0xF6632111; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = (pHwData->phy_type == 3) ? 0x40000a28 : 0x40000228; /* 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0) */
-		pltmp[11] = 0x232FDF30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x232FDF30; /* Modify for 33's 1.0.95.xxx version, antenna 1 */
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-		reg->BB3C = 0x00000000;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
-		pltmp[7] = 0x0E00FEFF; /* 0x104c 11b TX RC filter */
-		pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106208;
-		pltmp[9] = 0;		/* 0x1054 */
-		reg->BB54 = 0x00000000;
-		pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x64646464;
-		pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-
-	case RF_MAXIM_2825:
-	case RF_MAXIM_2827:
-	case RF_MAXIM_2828:
-		pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xefff1a34; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xefff1a34;
-		pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0xf6632111; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = 0x40000528;
-		pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x232fdf30; /* antenna 1 */
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-		reg->BB3C = 0x00000000;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
-		pltmp[7] = 0x0D00FDFF; /* 0x104c 11b TX RC filter */
-		pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106208;
-		pltmp[9] = 0;		/* 0x1054 */
-		reg->BB54 = 0x00000000;
-		pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x64646464;
-		pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-
-	case RF_MAXIM_2829:
-		pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xf4ff1632; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xf4ff1632;
-		pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0xf8632112; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = 0x40000528;
-		pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x232fdf30; /* antenna 1 */
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5b2c8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-		reg->BB3C = 0x00000000;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = 0x002c2617; /* 0x1048 11b TX RC filter */
-		pltmp[7] = 0x0800feff; /* 0x104c 11b TX RC filter */
-		pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106208;
-		pltmp[9] = 0;		/* 0x1054 */
-		reg->BB54 = 0x00000000;
-		pltmp[10] = 0x64644a4a; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x64646464;
-		pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-	case RF_AIROHA_2230:
-		pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xFFFd203c;
-		pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = 0X40000528;
-		pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x232dfF30; /* antenna 1 */
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-		reg->BB3C = 0x00000000;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
-		reg->BB48 = BB48_DEFAULT_AL2230_11G; /* 20051221 ch14 */
-		pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
-		reg->BB4C = BB4C_DEFAULT_AL2230_11G;
-		pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106200;
-		pltmp[9] = 0;		/* 0x1054 */
-		reg->BB54 = 0x00000000;
-		pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x52524242;
-		pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-	case RF_AIROHA_2230S:
-		pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xFFFd203c;
-		pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = 0X40000528;
-		pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x232dfF30; /* antenna 1 */
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
-		reg->BB3C = 0x00000000;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
-		reg->BB48 = BB48_DEFAULT_AL2230_11G; /* ch14 */
-		pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
-		reg->BB4C = BB4C_DEFAULT_AL2230_11G;
-		pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106200;
-		pltmp[9] = 0;		/* 0x1054 */
-		reg->BB54 = 0x00000000;
-		pltmp[10] = 0x52523232; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x52523232;
-		pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-	case RF_AIROHA_7230:
-		BBProcessor_AL7230_2400(pHwData);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-	case RF_WB_242:
-	case RF_WB_242_1:
-		pltmp[0] = 0x16A8525D; /* 0x1000 AGC_Ctrl1 */
-		pltmp[1] = 0x9AFF9ABA; /* 0x1004 AGC_Ctrl2 */
-		pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
-		pltmp[3] = 0xEEE91C32; /* 0x100c AGC_Ctrl4 */
-		reg->BB0C = 0xEEE91C32;
-		pltmp[4] = 0x0FACDCC5; /* 0x1010 AGC_Ctrl5 */
-		pltmp[5] = 0x000AA344; /* 0x1014 AGC_Ctrl6 */
-		pltmp[6] = 0x22222221; /* 0x1018 AGC_Ctrl7 */
-		pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
-		pltmp[8] = 0x04CC3440; /* 0x1020 AGC_Ctrl9 */
-		pltmp[9] = 0xA9002A79; /* 0x1024 AGC_Ctrl10 */
-		pltmp[10] = 0x40000528; /* 0x1028 */
-		pltmp[11] = 0x23457F30; /* 0x102c A_ACQ_Ctrl */
-		reg->BB2C = 0x23457F30;
-		Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
-
-		pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
-		reg->BB30 = 0x00002C54;
-		pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
-		pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
-		pltmp[3] = pHwData->BB3c_cal; /* 0x103c 11a TX LS filter */
-		reg->BB3C = pHwData->BB3c_cal;
-		pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
-		pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
-		pltmp[6] = BB48_DEFAULT_WB242_11G; /* 0x1048 11b TX RC filter */
-		reg->BB48 = BB48_DEFAULT_WB242_11G;
-		pltmp[7] = BB4C_DEFAULT_WB242_11G; /* 0x104c 11b TX RC filter */
-		reg->BB4C = BB4C_DEFAULT_WB242_11G;
-		pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
-		reg->BB50 = 0x27106208;
-		pltmp[9] = pHwData->BB54_cal; /* 0x1054 */
-		reg->BB54 = pHwData->BB54_cal;
-		pltmp[10] = 0x52523131; /* 0x1058 IQ_Alpha */
-		reg->BB58 = 0x52523131;
-		pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
-		Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
-
-		Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
-		break;
-	}
-
-	/* Fill the LNA table */
-	reg->LNAValue[0] = (u8) (reg->BB0C & 0xff);
-	reg->LNAValue[1] = 0;
-	reg->LNAValue[2] = (u8) ((reg->BB0C & 0xff00) >> 8);
-	reg->LNAValue[3] = 0;
-
-	/* Fill SQ3 table */
-	for (i = 0; i < MAX_SQ3_FILTER_SIZE; i++)
-		reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */
-}
-
-static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData,
-						struct chan_info Channel)
-{
-	RFSynthesizer_SetPowerIndex(pHwData, 100);
-}
-
-static void set_tx_power_per_channel_al2230(struct hw_data *pHwData,
-					struct chan_info Channel)
-{
-	u8	index = 100;
-	if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
-		index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
-
-	RFSynthesizer_SetPowerIndex(pHwData, index);
-}
-
-static void set_tx_power_per_channel_al7230(struct hw_data *pHwData,
-					struct chan_info Channel)
-{
-	u8	i, index = 100;
-
-	switch (Channel.band) {
-	case BAND_TYPE_DSSS:
-	case BAND_TYPE_OFDM_24:
-		if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
-			index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
-		break;
-	case BAND_TYPE_OFDM_5:
-		for (i = 0; i < 35; i++) {
-			if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo) {
-				if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
-					index = pHwData->TxVgaFor50[i].TxVgaValue;
-				break;
-			}
-		}
-		break;
-	}
-	RFSynthesizer_SetPowerIndex(pHwData, index);
-}
-
-static void set_tx_power_per_channel_wb242(struct hw_data *pHwData,
-					struct chan_info Channel)
-{
-	u8	index = 100;
-
-	switch (Channel.band) {
-	case BAND_TYPE_DSSS:
-	case BAND_TYPE_OFDM_24:
-		if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
-			index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
-		break;
-	case BAND_TYPE_OFDM_5:
-		break;
-	}
-	RFSynthesizer_SetPowerIndex(pHwData, index);
-}
-
-/*
- * ==========================================================================
- * RFSynthesizer_SwitchingChannel --
- *
- * Description:
- *   Swithch the RF channel.
- *
- * Arguments:
- *   pHwData    - Handle of the USB Device.
- *   Channel    - The channel no.
- *
- * Return values:
- *   None.
- * ===========================================================================
- */
-void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info Channel)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	pltmp[16]; /* The 16 is the maximum capability of hardware */
-	u32	count, ltmp;
-	u8	i, j, number;
-	u8	ChnlTmp;
-
-	switch (pHwData->phy_type) {
-	case RF_MAXIM_2825:
-	case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
-
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_channel_data_24[Channel.ChanNo-1][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		}
-		RFSynthesizer_SetPowerIndex(pHwData, 100);
-		break;
-	case RF_MAXIM_2827:
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_24[Channel.ChanNo-1][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		} else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
-			ChnlTmp = (Channel.ChanNo - 36) / 4;
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_50[ChnlTmp][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		}
-		RFSynthesizer_SetPowerIndex(pHwData, 100);
-		break;
-	case RF_MAXIM_2828:
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_24[Channel.ChanNo-1][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		} else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
-			ChnlTmp = (Channel.ChanNo - 36) / 4;
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_50[ChnlTmp][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		}
-		RFSynthesizer_SetPowerIndex(pHwData, 100);
-		break;
-	case RF_MAXIM_2829:
-		if (Channel.band <= BAND_TYPE_OFDM_24) {
-			for (i = 0; i < 3; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-		} else if (Channel.band == BAND_TYPE_OFDM_5) {
-			count = ARRAY_SIZE(max2829_channel_data_50);
-
-			for (i = 0; i < count; i++) {
-				if (max2829_channel_data_50[i][0] == Channel.ChanNo) {
-					for (j = 0; j < 3; j++)
-						pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_50[i][j+1], 18);
-					Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-
-					if ((max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946) {
-						ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A906, 18);
-						Wb35Reg_Write(pHwData, 0x0864, ltmp);
-					} else { /* 0x2A9C6 */
-						ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A986, 18);
-						Wb35Reg_Write(pHwData, 0x0864, ltmp);
-					}
-				}
-			}
-		}
-		set_tx_power_per_channel_max2829(pHwData, Channel);
-		break;
-	case RF_AIROHA_2230:
-	case RF_AIROHA_2230S:
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
-			for (i = 0; i < 2; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_channel_data_24[Channel.ChanNo-1][i], 20);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
-		}
-		set_tx_power_per_channel_al2230(pHwData, Channel);
-		break;
-	case RF_AIROHA_7230:
-		/* Channel independent registers */
-		if (Channel.band != pHwData->band) {
-			if (Channel.band <= BAND_TYPE_OFDM_24) {
-				/* Update BB register */
-				BBProcessor_AL7230_2400(pHwData);
-
-				number = ARRAY_SIZE(al7230_rf_data_24);
-				Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
-			} else {
-				/* Update BB register */
-				BBProcessor_AL7230_5000(pHwData);
-
-				number = ARRAY_SIZE(al7230_rf_data_50);
-				Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
-			}
-
-			/* Write to register. number must less and equal than 16 */
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT);
-			pr_debug("Band changed\n");
-		}
-
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
-			for (i = 0; i < 2; i++)
-				pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
-			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
-		} else if (Channel.band == BAND_TYPE_OFDM_5) {
-			/* Update Reg12 */
-			if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165)) {
-				ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
-				Wb35Reg_Write(pHwData, 0x0864, ltmp);
-			} else	{ /* reg12 = 0x00147c at Channel 4920 ~ 5320 */
-				ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
-				Wb35Reg_Write(pHwData, 0x0864, ltmp);
-			}
-
-			count = ARRAY_SIZE(al7230_channel_data_5);
-
-			for (i = 0; i < count; i++) {
-				if (al7230_channel_data_5[i][0] == Channel.ChanNo) {
-					for (j = 0; j < 3; j++)
-						pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_5[i][j+1] & 0xffffff);
-					Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
-				}
-			}
-		}
-		set_tx_power_per_channel_al7230(pHwData, Channel);
-		break;
-	case RF_WB_242:
-	case RF_WB_242_1:
-
-		if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
-			ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
-			Wb35Reg_Write(pHwData, 0x864, ltmp);
-		}
-		set_tx_power_per_channel_wb242(pHwData, Channel);
-		break;
-	}
-
-	if (Channel.band <= BAND_TYPE_OFDM_24) {
-		/* BB: select 2.4 GHz, bit[12-11]=00 */
-		reg->BB50 &= ~(BIT(11) | BIT(12));
-		Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
-		/* MAC: select 2.4 GHz, bit[5]=0 */
-		reg->M78_ERPInformation &= ~BIT(5);
-		Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
-		/* enable 11b Baseband */
-		reg->BB30 &= ~BIT(31);
-		Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
-	} else if (Channel.band == BAND_TYPE_OFDM_5) {
-		/* BB: select 5 GHz */
-		reg->BB50 &= ~(BIT(11) | BIT(12));
-		if (Channel.ChanNo <= 64)
-			reg->BB50 |= BIT(12);				/* 10-5.25GHz */
-		else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124))
-			reg->BB50 |= BIT(11);				/* 01-5.48GHz */
-		else if ((Channel.ChanNo >= 128) && (Channel.ChanNo <= 161))
-			reg->BB50 |= (BIT(12) | BIT(11));	/* 11-5.775GHz */
-		else	/* Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25 */
-			reg->BB50 |= BIT(12);
-		Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
-
-		/* (1) M78 should alway use 2.4G setting when using RF_AIROHA_7230 */
-		/* (2) BB30 has been updated previously. */
-		if (pHwData->phy_type != RF_AIROHA_7230) {
-			/* MAC: select 5 GHz, bit[5]=1 */
-			reg->M78_ERPInformation |= BIT(5);
-			Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
-
-			/* disable 11b Baseband */
-			reg->BB30 |= BIT(31);
-			Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
-		}
-	}
-}
-
-/*
- * Set the tx power directly from DUT GUI, not from the EEPROM.
- * Return the current setting
- */
-u8 RFSynthesizer_SetPowerIndex(struct hw_data *pHwData,  u8 PowerIndex)
-{
-	u32	Band = pHwData->band;
-	u8	index = 0;
-
-	if (pHwData->power_index == PowerIndex)
-		return PowerIndex;
-
-	if (RF_MAXIM_2825 == pHwData->phy_type) {
-		/* Channel 1 - 13 */
-		index = RFSynthesizer_SetMaxim2825Power(pHwData, PowerIndex);
-	} else if (RF_MAXIM_2827 == pHwData->phy_type) {
-		if (Band <= BAND_TYPE_OFDM_24)    /* Channel 1 - 13 */
-			index = RFSynthesizer_SetMaxim2827_24Power(pHwData, PowerIndex);
-		else /* Channel 36 - 64 */
-			index = RFSynthesizer_SetMaxim2827_50Power(pHwData, PowerIndex);
-	} else if (RF_MAXIM_2828 == pHwData->phy_type) {
-		if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */
-			index = RFSynthesizer_SetMaxim2828_24Power(pHwData, PowerIndex);
-		else /* Channel 36 - 64 */
-			index = RFSynthesizer_SetMaxim2828_50Power(pHwData, PowerIndex);
-	} else if (RF_AIROHA_2230 == pHwData->phy_type) {
-		/* Power index: 0 ~ 63 --- Channel 1 - 14 */
-		index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
-		index = (u8) al2230_txvga_data[index][1];
-	} else if (RF_AIROHA_2230S == pHwData->phy_type) {
-		/* Power index: 0 ~ 63 --- Channel 1 - 14 */
-		index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
-		index = (u8) al2230_txvga_data[index][1];
-	} else if (RF_AIROHA_7230 == pHwData->phy_type) {
-		/* Power index: 0 ~ 63 */
-		index = RFSynthesizer_SetAiroha7230Power(pHwData, PowerIndex);
-		index = (u8)al7230_txvga_data[index][1];
-	} else if ((RF_WB_242 == pHwData->phy_type) ||
-		 (RF_WB_242_1 == pHwData->phy_type)) {
-		/* Power index: 0 ~ 19 for original. New range is 0 ~ 33 */
-		index = RFSynthesizer_SetWinbond242Power(pHwData, PowerIndex);
-		index = (u8)w89rf242_txvga_data[index][1];
-	}
-
-	pHwData->power_index = index;  /* Backup current */
-	return index;
-}
-
-/* -- Sub function */
-u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	if (index > 1)
-		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_24[index], 18);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return index;
-}
-
-u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	if (index > 1)
-		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_50[index], 18);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return index;
-}
-
-u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	if (index > 1)
-		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_24[index], 18);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return index;
-}
-
-u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	if (index > 1)
-		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_50[index], 18);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return index;
-}
-
-u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	if (index > 1)
-		index = 1;
-	PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_power_data_24[index], 18);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return index;
-}
-
-u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	u8	i, count;
-
-	count = ARRAY_SIZE(al2230_txvga_data);
-	for (i = 0; i < count; i++) {
-		if (al2230_txvga_data[i][1] >= index)
-			break;
-	}
-	if (i == count)
-		i--;
-
-	PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_txvga_data[i][0], 20);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return i;
-}
-
-u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	u8	i, count;
-
-	count = ARRAY_SIZE(al7230_txvga_data);
-	for (i = 0; i < count; i++) {
-		if (al7230_txvga_data[i][1] >= index)
-			break;
-	}
-	if (i == count)
-		i--;
-	PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0] & 0xffffff);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-	return i;
-}
-
-u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
-{
-	u32	PowerData;
-	u8	i, count;
-
-	count = ARRAY_SIZE(w89rf242_txvga_data);
-	for (i = 0; i < count; i++) {
-		if (w89rf242_txvga_data[i][1] >= index)
-			break;
-	}
-	if (i == count)
-		i--;
-
-	/* Set TxVga into RF */
-	PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_txvga_data[i][0], 24);
-	Wb35Reg_Write(pHwData, 0x0864, PowerData);
-
-	/* Update BB48 BB4C BB58 for high precision txvga */
-	Wb35Reg_Write(pHwData, 0x1048, w89rf242_txvga_data[i][2]);
-	Wb35Reg_Write(pHwData, 0x104c, w89rf242_txvga_data[i][3]);
-	Wb35Reg_Write(pHwData, 0x1058, w89rf242_txvga_data[i][4]);
-
-	return i;
-}
-
-/*
- * ===========================================================================
- * Dxx_initial --
- * Mxx_initial --
- *
- *  Routine Description:
- *	Initial the hardware setting and module variable
- * ===========================================================================
- */
-void Dxx_initial(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	/*
-	 * Old IC: Single mode only.
-	 * New IC: operation decide by Software set bit[4]. 1:multiple 0: single
-	 */
-	reg->D00_DmaControl = 0xc0000004;	/* Txon, Rxon, multiple Rx for new 4k DMA */
-						/* Txon, Rxon, single Rx for old 8k ASIC */
-	if (!HAL_USB_MODE_BURST(pHwData))
-		reg->D00_DmaControl = 0xc0000000; /* Txon, Rxon, single Rx for new 4k DMA */
-
-	Wb35Reg_WriteSync(pHwData, 0x0400, reg->D00_DmaControl);
-}
-
-void Mxx_initial(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	tmp;
-	u32	pltmp[11];
-	u16	i;
-
-
-	/*
-	 * ======================================================
-	 * Initial Mxx register
-	 * ======================================================
-	 */
-
-	/* M00 bit set */
-	reg->M00_MacControl = 0x80000000; /* Solve beacon sequence number stop by hardware */
-
-	/* M24 disable enter power save, BB RxOn and enable NAV attack */
-	reg->M24_MacControl = 0x08040042;
-	pltmp[0] = reg->M24_MacControl;
-
-	pltmp[1] = 0; /* Skip M28, because no initialize value is required. */
-
-	/* M2C CWmin and CWmax setting */
-	pHwData->cwmin = DEFAULT_CWMIN;
-	pHwData->cwmax = DEFAULT_CWMAX;
-	reg->M2C_MacControl = DEFAULT_CWMIN << 10;
-	reg->M2C_MacControl |= DEFAULT_CWMAX;
-	pltmp[2] = reg->M2C_MacControl;
-
-	/* M30 BSSID */
-	pltmp[3] = *(u32 *)pHwData->bssid;
-
-	/* M34 */
-	pHwData->AID = DEFAULT_AID;
-	tmp = *(u16 *) (pHwData->bssid + 4);
-	tmp |= DEFAULT_AID << 16;
-	pltmp[4] = tmp;
-
-	/* M38 */
-	reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
-	pltmp[5] = reg->M38_MacControl;
-
-	/* M3C */
-	tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST;
-	reg->M3C_MacControl = tmp;
-	pltmp[6] = tmp;
-
-	/* M40 */
-	pHwData->slot_time_select = DEFAULT_SLOT_TIME;
-	tmp = (DEFAULT_ATIMWD << 16) | DEFAULT_SLOT_TIME;
-	reg->M40_MacControl = tmp;
-	pltmp[7] = tmp;
-
-	/* M44 */
-	tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; /* *1024 */
-	reg->M44_MacControl = tmp;
-	pltmp[8] = tmp;
-
-	/* M48 */
-	pHwData->BeaconPeriod = DEFAULT_BEACON_INTERVAL;
-	pHwData->ProbeDelay = DEFAULT_PROBE_DELAY_TIME;
-	tmp = (DEFAULT_BEACON_INTERVAL << 16) | DEFAULT_PROBE_DELAY_TIME;
-	reg->M48_MacControl = tmp;
-	pltmp[9] = tmp;
-
-	/* M4C */
-	reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
-	pltmp[10] = reg->M4C_MacStatus;
-
-	for (i = 0; i < 11; i++)
-		Wb35Reg_WriteSync(pHwData, 0x0824 + i * 4, pltmp[i]);
-
-	/* M60 */
-	Wb35Reg_WriteSync(pHwData, 0x0860, 0x12481248);
-	reg->M60_MacControl = 0x12481248;
-
-	/* M68 */
-	Wb35Reg_WriteSync(pHwData, 0x0868, 0x00050900);
-	reg->M68_MacControl = 0x00050900;
-
-	/* M98 */
-	Wb35Reg_WriteSync(pHwData, 0x0898, 0xffff8888);
-	reg->M98_MacControl = 0xffff8888;
-}
-
-
-void Uxx_power_off_procedure(struct hw_data *pHwData)
-{
-	/* SW, PMU reset and turn off clock */
-	Wb35Reg_WriteSync(pHwData, 0x03b0, 3);
-	Wb35Reg_WriteSync(pHwData, 0x03f0, 0xf9);
-}
-
-/*Decide the TxVga of every channel */
-void GetTxVgaFromEEPROM(struct hw_data *pHwData)
-{
-	u32	i, j, ltmp;
-	u16	Value[MAX_TXVGA_EEPROM];
-	u8	*pctmp;
-	u8	ctmp = 0;
-
-	/* Get the entire TxVga setting in EEPROM */
-	for (i = 0; i < MAX_TXVGA_EEPROM; i++) {
-		Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000 + 0x00010000 * i);
-		Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
-		Value[i] = (u16) (ltmp & 0xffff); /* Get 16 bit available */
-		Value[i] = cpu_to_le16(Value[i]); /* [7:0]2412 [7:0]2417 .... */
-	}
-
-	/* Adjust the filed which fills with reserved value. */
-	pctmp = (u8 *) Value;
-	for (i = 0; i < (MAX_TXVGA_EEPROM * 2); i++) {
-		if (pctmp[i] != 0xff)
-			ctmp = pctmp[i];
-		else
-			pctmp[i] = ctmp;
-	}
-
-	/* Adjust WB_242 to WB_242_1 TxVga scale */
-	if (pHwData->phy_type == RF_WB_242) {
-		for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */
-			for (j = 0; j < ARRAY_SIZE(w89rf242_txvga_old_mapping); j++) {
-				if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) {
-					pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0];
-					break;
-				}
-			}
-
-			if (j == ARRAY_SIZE(w89rf242_txvga_old_mapping))
-				pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
-		}
-	}
-
-	memcpy(pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM * 2); /* MAX_TXVGA_EEPROM is u16 count */
-	EEPROMTxVgaAdjust(pHwData);
-}
-
-/*
- * This function will affect the TxVga parameter in HAL. If hal_set_current_channel
- * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
- * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
- * This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
- */
-void EEPROMTxVgaAdjust(struct hw_data *pHwData)
-{
-	u8	*pTxVga = pHwData->TxVgaSettingInEEPROM;
-	s16	i, stmp;
-
-	/* -- 2.4G -- */
-	/* channel 1 ~ 5 */
-	stmp = pTxVga[1] - pTxVga[0];
-	for (i = 0; i < 5; i++)
-		pHwData->TxVgaFor24[i] = pTxVga[0] + stmp * i / 4;
-	/* channel 6 ~ 10 */
-	stmp = pTxVga[2] - pTxVga[1];
-	for (i = 5; i < 10; i++)
-		pHwData->TxVgaFor24[i] = pTxVga[1] + stmp * (i - 5) / 4;
-	/* channel 11 ~ 13 */
-	stmp = pTxVga[3] - pTxVga[2];
-	for (i = 10; i < 13; i++)
-		pHwData->TxVgaFor24[i] = pTxVga[2] + stmp * (i - 10) / 2;
-	/* channel 14 */
-	pHwData->TxVgaFor24[13] = pTxVga[3];
-
-	/* -- 5G -- */
-	if (pHwData->phy_type == RF_AIROHA_7230) {
-		/* channel 184 */
-		pHwData->TxVgaFor50[0].ChanNo = 184;
-		pHwData->TxVgaFor50[0].TxVgaValue = pTxVga[4];
-		/* channel 196 */
-		pHwData->TxVgaFor50[3].ChanNo = 196;
-		pHwData->TxVgaFor50[3].TxVgaValue = pTxVga[5];
-		/* interpolate */
-		pHwData->TxVgaFor50[1].ChanNo = 188;
-		pHwData->TxVgaFor50[2].ChanNo = 192;
-		stmp = pTxVga[5] - pTxVga[4];
-		pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp / 3;
-		pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp * 2 / 3;
-
-		/* channel 16 */
-		pHwData->TxVgaFor50[6].ChanNo = 16;
-		pHwData->TxVgaFor50[6].TxVgaValue = pTxVga[6];
-		pHwData->TxVgaFor50[4].ChanNo = 8;
-		pHwData->TxVgaFor50[4].TxVgaValue = pTxVga[6];
-		pHwData->TxVgaFor50[5].ChanNo = 12;
-		pHwData->TxVgaFor50[5].TxVgaValue = pTxVga[6];
-
-		/* channel 36 */
-		pHwData->TxVgaFor50[8].ChanNo = 36;
-		pHwData->TxVgaFor50[8].TxVgaValue = pTxVga[7];
-		pHwData->TxVgaFor50[7].ChanNo = 34;
-		pHwData->TxVgaFor50[7].TxVgaValue = pTxVga[7];
-		pHwData->TxVgaFor50[9].ChanNo = 38;
-		pHwData->TxVgaFor50[9].TxVgaValue = pTxVga[7];
-
-		/* channel 40 */
-		pHwData->TxVgaFor50[10].ChanNo = 40;
-		pHwData->TxVgaFor50[10].TxVgaValue = pTxVga[8];
-		/* channel 48 */
-		pHwData->TxVgaFor50[14].ChanNo = 48;
-		pHwData->TxVgaFor50[14].TxVgaValue = pTxVga[9];
-		/* interpolate */
-		pHwData->TxVgaFor50[11].ChanNo = 42;
-		pHwData->TxVgaFor50[12].ChanNo = 44;
-		pHwData->TxVgaFor50[13].ChanNo = 46;
-		stmp = pTxVga[9] - pTxVga[8];
-		pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp / 4;
-		pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp * 2 / 4;
-		pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp * 3 / 4;
-
-		/* channel 52 */
-		pHwData->TxVgaFor50[15].ChanNo = 52;
-		pHwData->TxVgaFor50[15].TxVgaValue = pTxVga[10];
-		/* channel 64 */
-		pHwData->TxVgaFor50[18].ChanNo = 64;
-		pHwData->TxVgaFor50[18].TxVgaValue = pTxVga[11];
-		/* interpolate */
-		pHwData->TxVgaFor50[16].ChanNo = 56;
-		pHwData->TxVgaFor50[17].ChanNo = 60;
-		stmp = pTxVga[11] - pTxVga[10];
-		pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp / 3;
-		pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp * 2 / 3;
-
-		/* channel 100 */
-		pHwData->TxVgaFor50[19].ChanNo = 100;
-		pHwData->TxVgaFor50[19].TxVgaValue = pTxVga[12];
-		/* channel 112 */
-		pHwData->TxVgaFor50[22].ChanNo = 112;
-		pHwData->TxVgaFor50[22].TxVgaValue = pTxVga[13];
-		/* interpolate */
-		pHwData->TxVgaFor50[20].ChanNo = 104;
-		pHwData->TxVgaFor50[21].ChanNo = 108;
-		stmp = pTxVga[13] - pTxVga[12];
-		pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp / 3;
-		pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp * 2 / 3;
-
-		/* channel 128 */
-		pHwData->TxVgaFor50[26].ChanNo = 128;
-		pHwData->TxVgaFor50[26].TxVgaValue = pTxVga[14];
-		/* interpolate */
-		pHwData->TxVgaFor50[23].ChanNo = 116;
-		pHwData->TxVgaFor50[24].ChanNo = 120;
-		pHwData->TxVgaFor50[25].ChanNo = 124;
-		stmp = pTxVga[14] - pTxVga[13];
-		pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp / 4;
-		pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp * 2 / 4;
-		pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp * 3 / 4;
-
-		/* channel 140 */
-		pHwData->TxVgaFor50[29].ChanNo = 140;
-		pHwData->TxVgaFor50[29].TxVgaValue = pTxVga[15];
-		/* interpolate */
-		pHwData->TxVgaFor50[27].ChanNo = 132;
-		pHwData->TxVgaFor50[28].ChanNo = 136;
-		stmp = pTxVga[15] - pTxVga[14];
-		pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp / 3;
-		pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp * 2 / 3;
-
-		/* channel 149 */
-		pHwData->TxVgaFor50[30].ChanNo = 149;
-		pHwData->TxVgaFor50[30].TxVgaValue = pTxVga[16];
-		/* channel 165 */
-		pHwData->TxVgaFor50[34].ChanNo = 165;
-		pHwData->TxVgaFor50[34].TxVgaValue = pTxVga[17];
-		/* interpolate */
-		pHwData->TxVgaFor50[31].ChanNo = 153;
-		pHwData->TxVgaFor50[32].ChanNo = 157;
-		pHwData->TxVgaFor50[33].ChanNo = 161;
-		stmp = pTxVga[17] - pTxVga[16];
-		pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp / 4;
-		pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4;
-		pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4;
-	}
-}
-
-void BBProcessor_RateChanging(struct hw_data *pHwData,  u8 rate)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	unsigned char	Is11bRate;
-
-	Is11bRate = (rate % 6) ? 1 : 0;
-	switch (pHwData->phy_type) {
-	case RF_AIROHA_2230:
-	case RF_AIROHA_2230S:
-		if (Is11bRate) {
-			if ((reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
-				(reg->BB4C != BB4C_DEFAULT_AL2230_11B)) {
-				Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11B);
-				Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B);
-			}
-		} else {
-			if ((reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
-				(reg->BB4C != BB4C_DEFAULT_AL2230_11G)) {
-				Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11G);
-				Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G);
-			}
-		}
-		break;
-	case RF_WB_242:
-		if (Is11bRate) {
-			if ((reg->BB48 != BB48_DEFAULT_WB242_11B) &&
-				(reg->BB4C != BB4C_DEFAULT_WB242_11B)) {
-				reg->BB48 = BB48_DEFAULT_WB242_11B;
-				reg->BB4C = BB4C_DEFAULT_WB242_11B;
-				Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11B);
-				Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11B);
-			}
-		} else {
-			if ((reg->BB48 != BB48_DEFAULT_WB242_11G) &&
-				(reg->BB4C != BB4C_DEFAULT_WB242_11G)) {
-				reg->BB48 = BB48_DEFAULT_WB242_11G;
-				reg->BB4C = BB4C_DEFAULT_WB242_11G;
-				Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11G);
-				Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11G);
-			}
-		}
-		break;
-	}
-}
-
diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h
deleted file mode 100644
index 652ae7085a5f..000000000000
--- a/drivers/staging/winbond/sme_api.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * sme_api.h
- *
- * Copyright(C) 2002 Winbond Electronics Corp.
- */
-
-#ifndef __SME_API_H__
-#define __SME_API_H__
-
-#include <linux/types.h>
-
-#include "localpara.h"
-
-/****************** CONSTANT AND MACRO SECTION ******************************/
-
-#define MEDIA_STATE_DISCONNECTED	0
-#define MEDIA_STATE_CONNECTED		1
-
-/* ARRAY CHECK */
-#define MAX_POWER_TO_DB			32
-
-/****************** TYPE DEFINITION SECTION *********************************/
-
-/****************** EXPORTED FUNCTION DECLARATION SECTION *******************/
-
-/* OID_802_11_BSSID */
-s8 sme_get_bssid(void *pcore_data, u8 *pbssid);
-s8 sme_get_desired_bssid(void *pcore_data, u8 *pbssid); /* Unused */
-s8 sme_set_desired_bssid(void *pcore_data, u8 *pbssid);
-
-/* OID_802_11_SSID */
-s8 sme_get_ssid(void *pcore_data, u8 *pssid, u8 *pssid_len);
-s8 sme_get_desired_ssid(void *pcore_data, u8 *pssid, u8 *pssid_len);/* Unused */
-s8 sme_set_desired_ssid(void *pcore_data, u8 *pssid, u8 ssid_len);
-
-/* OID_802_11_INFRASTRUCTURE_MODE */
-s8 sme_get_bss_type(void *pcore_data, u8 *pbss_type);
-s8 sme_get_desired_bss_type(void *pcore_data, u8 *pbss_type); /* Unused */
-s8 sme_set_desired_bss_type(void *pcore_data, u8 bss_type);
-
-/* OID_802_11_FRAGMENTATION_THRESHOLD */
-s8 sme_get_fragment_threshold(void *pcore_data, u32 *pthreshold);
-s8 sme_set_fragment_threshold(void *pcore_data, u32 threshold);
-
-/* OID_802_11_RTS_THRESHOLD */
-s8 sme_get_rts_threshold(void *pcore_data, u32 *pthreshold);
-s8 sme_set_rts_threshold(void *pcore_data, u32 threshold);
-
-/* OID_802_11_CONFIGURATION */
-s8 sme_get_beacon_period(void *pcore_data, u16 *pbeacon_period);
-s8 sme_set_beacon_period(void *pcore_data, u16 beacon_period);
-
-s8 sme_get_atim_window(void *pcore_data, u16 *patim_window);
-s8 sme_set_atim_window(void *pcore_data, u16 atim_window);
-
-s8 sme_get_current_channel(void *pcore_data, u8 *pcurrent_channel);
-s8 sme_get_current_band(void *pcore_data, u8 *pcurrent_band);
-s8 sme_set_current_channel(void *pcore_data, u8 current_channel);
-
-/* OID_802_11_BSSID_LIST */
-s8 sme_get_scan_bss_count(void *pcore_data, u8 *pcount);
-s8 sme_get_scan_bss(void *pcore_data, u8 index, void **ppbss);
-
-s8 sme_get_connected_bss(void *pcore_data, void **ppbss_now);
-
-/* OID_802_11_AUTHENTICATION_MODE */
-s8 sme_get_auth_mode(void *pcore_data, u8 *pauth_mode);
-s8 sme_set_auth_mode(void *pcore_data, u8 auth_mode);
-
-/* OID_802_11_WEP_STATUS / OID_802_11_ENCRYPTION_STATUS */
-s8 sme_get_wep_mode(void *pcore_data, u8 *pwep_mode);
-s8 sme_set_wep_mode(void *pcore_data, u8 wep_mode);
-
-/* OID_GEN_VENDOR_ID */
-/* OID_802_3_PERMANENT_ADDRESS */
-s8 sme_get_permanent_mac_addr(void *pcore_data, u8 *pmac_addr);
-
-/* OID_802_3_CURRENT_ADDRESS */
-s8 sme_get_current_mac_addr(void *pcore_data, u8 *pmac_addr);
-
-/* OID_802_11_NETWORK_TYPE_IN_USE */
-s8 sme_get_network_type_in_use(void *pcore_data, u8 *ptype);
-s8 sme_set_network_type_in_use(void *pcore_data, u8 type);
-
-/* OID_802_11_SUPPORTED_RATES */
-s8 sme_get_supported_rate(void *pcore_data, u8 *prates);
-
-/* OID_802_11_ADD_WEP */
-s8 sme_set_add_wep(void *pcore_data, u32 key_index, u32 key_len,
-					 u8 *Address, u8 *key);
-
-/* OID_802_11_REMOVE_WEP */
-s8 sme_set_remove_wep(void *pcre_data, u32 key_index);
-
-/* OID_802_11_DISASSOCIATE */
-s8 sme_set_disassociate(void *pcore_data);
-
-/* OID_802_11_POWER_MODE */
-s8 sme_get_power_mode(void *pcore_data, u8 *pmode);
-s8 sme_set_power_mode(void *pcore_data, u8 mode);
-
-/* OID_802_11_BSSID_LIST_SCAN */
-s8 sme_set_bssid_list_scan(void *pcore_data, void *pscan_para);
-
-/* OID_802_11_RELOAD_DEFAULTS */
-s8 sme_set_reload_defaults(void *pcore_data, u8 reload_type);
-
-
-/*------------------------- non-standard ----------------------------------*/
-s8 sme_get_connect_status(void *pcore_data, u8 *pstatus);
-/*--------------------------------------------------------------------------*/
-
-void sme_get_encryption_status(void *pcore_data, u8 *EncryptStatus);
-void sme_set_encryption_status(void *pcore_data, u8 EncryptStatus);
-s8 sme_add_key(void	*pcore_data,
-		u32	key_index,
-		u8	key_len,
-		u8	key_type,
-		u8	*key_bssid,
-		u8	*ptx_tsc,
-		u8	*prx_tsc,
-		u8	*key_material);
-void sme_remove_default_key(void *pcore_data, int index);
-void sme_remove_mapping_key(void *pcore_data, u8 *pmac_addr);
-void sme_clear_all_mapping_key(void *pcore_data);
-void sme_clear_all_default_key(void *pcore_data);
-
-
-
-s8 sme_set_preamble_mode(void *pcore_data, u8 mode);
-s8 sme_get_preamble_mode(void *pcore_data, u8 *mode);
-s8 sme_get_preamble_type(void *pcore_data, u8 *type);
-s8 sme_set_slottime_mode(void *pcore_data, u8 mode);
-s8 sme_get_slottime_mode(void *pcore_data, u8 *mode);
-s8 sme_get_slottime_type(void *pcore_data, u8 *type);
-s8 sme_set_txrate_policy(void *pcore_data, u8 policy);
-s8 sme_get_txrate_policy(void *pcore_data, u8 *policy);
-s8 sme_get_cwmin_value(void *pcore_data, u8 *cwmin);
-s8 sme_get_cwmax_value(void *pcore_data, u16 *cwmax);
-s8 sme_get_ms_radio_mode(void *pcore_data, u8 *pMsRadioOff);
-s8 sme_set_ms_radio_mode(void *pcore_data, u8 boMsRadioOff);
-
-void sme_get_tx_power_level(void *pcore_data, u32 *TxPower);
-u8 sme_set_tx_power_level(void *pcore_data, u32 TxPower);
-void sme_get_antenna_count(void *pcore_data, u32 *AntennaCount);
-void sme_get_rx_antenna(void *pcore_data, u32 *RxAntenna);
-u8 sme_set_rx_antenna(void *pcore_data, u32 RxAntenna);
-void sme_get_tx_antenna(void *pcore_data, u32 *TxAntenna);
-s8 sme_set_tx_antenna(void *pcore_data, u32 TxAntenna);
-s8 sme_set_IBSS_chan(void *pcore_data, struct chan_info chan);
-s8 sme_set_IE_append(void *pcore_data, u8 *buffer, u16 buf_len);
-
-/* ================== Local functions ====================== */
-static const u32 PowerDbToMw[] = {
-	56,	/* mW, MAX - 0,	17.5 dbm */
-	40,	/* mW, MAX - 1,	16.0 dbm */
-	30,	/* mW, MAX - 2,	14.8 dbm */
-	20,	/* mW, MAX - 3,	13.0 dbm */
-	15,	/* mW, MAX - 4,	11.8 dbm */
-	12,	/* mW, MAX - 5,	10.6 dbm */
-	9,	/* mW, MAX - 6,	 9.4 dbm */
-	7,	/* mW, MAX - 7,	 8.3 dbm */
-	5,	/* mW, MAX - 8,	 6.4 dbm */
-	4,	/* mW, MAX - 9,	 5.3 dbm */
-	3,	/* mW, MAX - 10,  4.0 dbm */
-	2,	/* mW, MAX - 11,  ? dbm */
-	2,	/* mW, MAX - 12,  ? dbm */
-	2,	/* mW, MAX - 13,  ? dbm */
-	2,	/* mW, MAX - 14,  ? dbm */
-	2,	/* mW, MAX - 15,  ? dbm */
-	2,	/* mW, MAX - 16,  ? dbm */
-	2,	/* mW, MAX - 17,  ? dbm */
-	2,	/* mW, MAX - 18,  ? dbm */
-	1,	/* mW, MAX - 19,  ? dbm */
-	1,	/* mW, MAX - 20,  ? dbm */
-	1,	/* mW, MAX - 21,  ? dbm */
-	1,	/* mW, MAX - 22,  ? dbm */
-	1,	/* mW, MAX - 23,  ? dbm */
-	1,	/* mW, MAX - 24,  ? dbm */
-	1,	/* mW, MAX - 25,  ? dbm */
-	1,	/* mW, MAX - 26,  ? dbm */
-	1,	/* mW, MAX - 27,  ? dbm */
-	1,	/* mW, MAX - 28,  ? dbm */
-	1,	/* mW, MAX - 29,  ? dbm */
-	1,	/* mW, MAX - 30,  ? dbm */
-	1	/* mW, MAX - 31,  ? dbm */
-};
-
-#endif /* __SME_API_H__ */
-
-
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
deleted file mode 100644
index bbc5ddcce6f5..000000000000
--- a/drivers/staging/winbond/wb35reg.c
+++ /dev/null
@@ -1,806 +0,0 @@
-#include "wb35reg_f.h"
-#include "phy_calibration.h"
-
-#include <linux/usb.h>
-#include <linux/slab.h>
-
-/*
- * true  : read command process successfully
- * false : register not support
- * RegisterNo : start base
- * pRegisterData : data point
- * NumberOfData : number of register data
- * Flag : AUTO_INCREMENT - RegisterNo will auto increment 4
- *	  NO_INCREMENT - Function will write data into the same register
- */
-unsigned char Wb35Reg_BurstWrite(struct hw_data *pHwData, u16 RegisterNo,
-				 u32 *pRegisterData, u8 NumberOfData, u8 Flag)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct urb		*urb = NULL;
-	struct wb35_reg_queue	*reg_queue = NULL;
-	u16			UrbSize;
-	struct usb_ctrlrequest	*dr;
-	u16			i, DataSize = NumberOfData * 4;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	/* Trying to use burst write function if use new hardware */
-	UrbSize = sizeof(struct wb35_reg_queue) + DataSize + sizeof(struct usb_ctrlrequest);
-	reg_queue = kzalloc(UrbSize, GFP_ATOMIC);
-	if (reg_queue == NULL)
-		return false;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (urb == NULL) {
-		kfree(reg_queue);
-		return false;
-	}
-
-	reg_queue->DIRECT = 2; /* burst write register */
-	reg_queue->INDEX = RegisterNo;
-	reg_queue->pBuffer = (u32 *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
-	memcpy(reg_queue->pBuffer, pRegisterData, DataSize);
-	/* the function for reversing register data from little endian to big endian */
-	for (i = 0; i < NumberOfData; i++)
-		reg_queue->pBuffer[i] = cpu_to_le32(reg_queue->pBuffer[i]);
-
-	dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue) + DataSize);
-	dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE;
-	dr->bRequest = 0x04; /* USB or vendor-defined request code, burst mode */
-	dr->wValue = cpu_to_le16(Flag); /* 0: Register number auto-increment, 1: No auto increment */
-	dr->wIndex = cpu_to_le16(RegisterNo);
-	dr->wLength = cpu_to_le16(DataSize);
-	reg_queue->Next = NULL;
-	reg_queue->pUsbReq = dr;
-	reg_queue->urb = urb;
-
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	if (reg->reg_first == NULL)
-		reg->reg_first = reg_queue;
-	else
-		reg->reg_last->Next = reg_queue;
-	reg->reg_last = reg_queue;
-
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-	/* Start EP0VM */
-	Wb35Reg_EP0VM_start(pHwData);
-
-	return true;
-}
-
-void Wb35Reg_Update(struct hw_data *pHwData, u16 RegisterNo, u32 RegisterValue)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	switch (RegisterNo) {
-	case 0x3b0:
-		reg->U1B0 = RegisterValue;
-		break;
-	case 0x3bc:
-		reg->U1BC_LEDConfigure = RegisterValue;
-		break;
-	case 0x400:
-		reg->D00_DmaControl = RegisterValue;
-		break;
-	case 0x800:
-		reg->M00_MacControl = RegisterValue;
-		break;
-	case 0x804:
-		reg->M04_MulticastAddress1 = RegisterValue;
-		break;
-	case 0x808:
-		reg->M08_MulticastAddress2 = RegisterValue;
-		break;
-	case 0x824:
-		reg->M24_MacControl = RegisterValue;
-		break;
-	case 0x828:
-		reg->M28_MacControl = RegisterValue;
-		break;
-	case 0x82c:
-		reg->M2C_MacControl = RegisterValue;
-		break;
-	case 0x838:
-		reg->M38_MacControl = RegisterValue;
-		break;
-	case 0x840:
-		reg->M40_MacControl = RegisterValue;
-		break;
-	case 0x844:
-		reg->M44_MacControl = RegisterValue;
-		break;
-	case 0x848:
-		reg->M48_MacControl = RegisterValue;
-		break;
-	case 0x84c:
-		reg->M4C_MacStatus = RegisterValue;
-		break;
-	case 0x860:
-		reg->M60_MacControl = RegisterValue;
-		break;
-	case 0x868:
-		reg->M68_MacControl = RegisterValue;
-		break;
-	case 0x870:
-		reg->M70_MacControl = RegisterValue;
-		break;
-	case 0x874:
-		reg->M74_MacControl = RegisterValue;
-		break;
-	case 0x878:
-		reg->M78_ERPInformation = RegisterValue;
-		break;
-	case 0x87C:
-		reg->M7C_MacControl = RegisterValue;
-		break;
-	case 0x880:
-		reg->M80_MacControl = RegisterValue;
-		break;
-	case 0x884:
-		reg->M84_MacControl = RegisterValue;
-		break;
-	case 0x888:
-		reg->M88_MacControl = RegisterValue;
-		break;
-	case 0x898:
-		reg->M98_MacControl = RegisterValue;
-		break;
-	case 0x100c:
-		reg->BB0C = RegisterValue;
-		break;
-	case 0x102c:
-		reg->BB2C = RegisterValue;
-		break;
-	case 0x1030:
-		reg->BB30 = RegisterValue;
-		break;
-	case 0x103c:
-		reg->BB3C = RegisterValue;
-		break;
-	case 0x1048:
-		reg->BB48 = RegisterValue;
-		break;
-	case 0x104c:
-		reg->BB4C = RegisterValue;
-		break;
-	case 0x1050:
-		reg->BB50 = RegisterValue;
-		break;
-	case 0x1054:
-		reg->BB54 = RegisterValue;
-		break;
-	case 0x1058:
-		reg->BB58 = RegisterValue;
-		break;
-	case 0x105c:
-		reg->BB5C = RegisterValue;
-		break;
-	case 0x1060:
-		reg->BB60 = RegisterValue;
-		break;
-	}
-}
-
-/*
- * true  : read command process successfully
- * false : register not support
- */
-unsigned char Wb35Reg_WriteSync(struct hw_data *pHwData, u16 RegisterNo,
-				u32 RegisterValue)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	int ret = -1;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	RegisterValue = cpu_to_le32(RegisterValue);
-
-	/* update the register by send usb message */
-	reg->SyncIoPause = 1;
-
-	/* Wait until EP0VM stop */
-	while (reg->EP0vm_state != VM_STOP)
-		msleep(10);
-
-	/* Sync IoCallDriver */
-	reg->EP0vm_state = VM_RUNNING;
-	ret = usb_control_msg(pHwData->udev,
-			      usb_sndctrlpipe(pHwData->udev, 0),
-			      0x03,
-			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-			      0x0, RegisterNo, &RegisterValue, 4, HZ * 100);
-	reg->EP0vm_state = VM_STOP;
-	reg->SyncIoPause = 0;
-
-	Wb35Reg_EP0VM_start(pHwData);
-
-	if (ret < 0) {
-		pr_debug("EP0 Write register usb message sending error\n");
-		pHwData->SurpriseRemove = 1;
-		return false;
-	}
-	return true;
-}
-
-/*
- * true  : read command process successfully
- * false : register not support
- */
-unsigned char Wb35Reg_Write(struct hw_data *pHwData, u16 RegisterNo,
-			    u32 RegisterValue)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct usb_ctrlrequest	*dr;
-	struct urb		*urb = NULL;
-	struct wb35_reg_queue	*reg_queue = NULL;
-	u16			UrbSize;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	/* update the register by send urb request */
-	UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
-	reg_queue = kzalloc(UrbSize, GFP_ATOMIC);
-	if (reg_queue == NULL)
-		return false;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (urb == NULL) {
-		kfree(reg_queue);
-		return false;
-	}
-
-	reg_queue->DIRECT = 1; /* burst write register */
-	reg_queue->INDEX = RegisterNo;
-	reg_queue->VALUE = cpu_to_le32(RegisterValue);
-	reg_queue->RESERVED_VALID = false;
-	dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
-	dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE;
-	dr->bRequest = 0x03; /* USB or vendor-defined request code, burst mode */
-	dr->wValue = cpu_to_le16(0x0);
-	dr->wIndex = cpu_to_le16(RegisterNo);
-	dr->wLength = cpu_to_le16(4);
-
-	/* Enter the sending queue */
-	reg_queue->Next = NULL;
-	reg_queue->pUsbReq = dr;
-	reg_queue->urb = urb;
-
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	if (reg->reg_first == NULL)
-		reg->reg_first = reg_queue;
-	else
-		reg->reg_last->Next = reg_queue;
-	reg->reg_last = reg_queue;
-
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-	/* Start EP0VM */
-	Wb35Reg_EP0VM_start(pHwData);
-
-	return true;
-}
-
-/*
- * This command will be executed with a user defined value. When it completes,
- * this value is useful. For example, hal_set_current_channel will use it.
- * true  : read command process successfully
- * false : register not supported
- */
-unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *pHwData,
-						u16 RegisterNo,
-						u32 RegisterValue,
-						s8 *pValue,
-						s8 Len)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct usb_ctrlrequest	*dr;
-	struct urb		*urb = NULL;
-	struct wb35_reg_queue	*reg_queue = NULL;
-	u16			UrbSize;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	/* update the register by send urb request */
-	UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
-	reg_queue = kzalloc(UrbSize, GFP_ATOMIC);
-	if (reg_queue == NULL)
-		return false;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (urb == NULL) {
-		kfree(reg_queue);
-		return false;
-	}
-
-	reg_queue->DIRECT = 1; /* burst write register */
-	reg_queue->INDEX = RegisterNo;
-	reg_queue->VALUE = cpu_to_le32(RegisterValue);
-	/* NOTE : Users must guarantee the size of value will not exceed the buffer size. */
-	memcpy(reg_queue->RESERVED, pValue, Len);
-	reg_queue->RESERVED_VALID = true;
-	dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
-	dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE;
-	dr->bRequest = 0x03; /* USB or vendor-defined request code, burst mode */
-	dr->wValue = cpu_to_le16(0x0);
-	dr->wIndex = cpu_to_le16(RegisterNo);
-	dr->wLength = cpu_to_le16(4);
-
-	/* Enter the sending queue */
-	reg_queue->Next = NULL;
-	reg_queue->pUsbReq = dr;
-	reg_queue->urb = urb;
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	if (reg->reg_first == NULL)
-		reg->reg_first = reg_queue;
-	else
-		reg->reg_last->Next = reg_queue;
-	reg->reg_last = reg_queue;
-
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-	/* Start EP0VM */
-	Wb35Reg_EP0VM_start(pHwData);
-
-	return true;
-}
-
-/*
- * true  : read command process successfully
- * false : register not support
- * pRegisterValue : It must be a resident buffer due to
- *		    asynchronous read register.
- */
-unsigned char Wb35Reg_ReadSync(struct hw_data *pHwData, u16 RegisterNo,
-			       u32 *pRegisterValue)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32		*pltmp = pRegisterValue;
-	int		ret = -1;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	/* Read the register by send usb message */
-	reg->SyncIoPause = 1;
-
-	/* Wait until EP0VM stop */
-	while (reg->EP0vm_state != VM_STOP)
-		msleep(10);
-
-	reg->EP0vm_state = VM_RUNNING;
-	ret = usb_control_msg(pHwData->udev,
-			      usb_rcvctrlpipe(pHwData->udev, 0),
-			      0x01,
-			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			      0x0, RegisterNo, pltmp, 4, HZ * 100);
-
-	*pRegisterValue = cpu_to_le32(*pltmp);
-
-	reg->EP0vm_state = VM_STOP;
-
-	Wb35Reg_Update(pHwData, RegisterNo, *pRegisterValue);
-	reg->SyncIoPause = 0;
-
-	Wb35Reg_EP0VM_start(pHwData);
-
-	if (ret < 0) {
-		pr_debug("EP0 Read register usb message sending error\n");
-		pHwData->SurpriseRemove = 1;
-		return false;
-	}
-	return true;
-}
-
-/*
- * true  : read command process successfully
- * false : register not support
- * pRegisterValue : It must be a resident buffer due to
- *		    asynchronous read register.
- */
-unsigned char Wb35Reg_Read(struct hw_data *pHwData, u16 RegisterNo,
-			   u32 *pRegisterValue)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct usb_ctrlrequest	*dr;
-	struct urb		*urb;
-	struct wb35_reg_queue	*reg_queue;
-	u16			UrbSize;
-
-	/* Module shutdown */
-	if (pHwData->SurpriseRemove)
-		return false;
-
-	/* update the variable by send Urb to read register */
-	UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
-	reg_queue = kzalloc(UrbSize, GFP_ATOMIC);
-	if (reg_queue == NULL)
-		return false;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (urb == NULL) {
-		kfree(reg_queue);
-		return false;
-	}
-	reg_queue->DIRECT = 0; /* read register */
-	reg_queue->INDEX = RegisterNo;
-	reg_queue->pBuffer = pRegisterValue;
-	dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
-	dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN;
-	dr->bRequest = 0x01; /* USB or vendor-defined request code, burst mode */
-	dr->wValue = cpu_to_le16(0x0);
-	dr->wIndex = cpu_to_le16(RegisterNo);
-	dr->wLength = cpu_to_le16(4);
-
-	/* Enter the sending queue */
-	reg_queue->Next = NULL;
-	reg_queue->pUsbReq = dr;
-	reg_queue->urb = urb;
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	if (reg->reg_first == NULL)
-		reg->reg_first = reg_queue;
-	else
-		reg->reg_last->Next = reg_queue;
-	reg->reg_last = reg_queue;
-
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-	/* Start EP0VM */
-	Wb35Reg_EP0VM_start(pHwData);
-
-	return true;
-}
-
-
-void Wb35Reg_EP0VM_start(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (atomic_inc_return(&reg->RegFireCount) == 1) {
-		reg->EP0vm_state = VM_RUNNING;
-		Wb35Reg_EP0VM(pHwData);
-	} else
-		atomic_dec(&reg->RegFireCount);
-}
-
-void Wb35Reg_EP0VM(struct hw_data *pHwData)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct urb		*urb;
-	struct usb_ctrlrequest	*dr;
-	u32			*pBuffer;
-	int			ret = -1;
-	struct wb35_reg_queue	*reg_queue;
-
-
-	if (reg->SyncIoPause)
-		goto cleanup;
-
-	if (pHwData->SurpriseRemove)
-		goto cleanup;
-
-	/* Get the register data and send to USB through Irp */
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	reg_queue = reg->reg_first;
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-	if (!reg_queue)
-		goto cleanup;
-
-	/* Get an Urb, send it */
-	urb = (struct urb *)reg_queue->urb;
-
-	dr = reg_queue->pUsbReq;
-	urb = reg_queue->urb;
-	pBuffer = reg_queue->pBuffer;
-	if (reg_queue->DIRECT == 1) /* output */
-		pBuffer = &reg_queue->VALUE;
-
-	usb_fill_control_urb(urb, pHwData->udev,
-			      REG_DIRECTION(pHwData->udev, reg_queue),
-			      (u8 *)dr, pBuffer, cpu_to_le16(dr->wLength),
-			      Wb35Reg_EP0VM_complete, (void *)pHwData);
-
-	reg->EP0vm_state = VM_RUNNING;
-
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-
-	if (ret < 0) {
-		pr_debug("EP0 Irp sending error\n");
-		goto cleanup;
-	}
-	return;
-
- cleanup:
-	reg->EP0vm_state = VM_STOP;
-	atomic_dec(&reg->RegFireCount);
-}
-
-
-void Wb35Reg_EP0VM_complete(struct urb *urb)
-{
-	struct hw_data		*pHwData = (struct hw_data *)urb->context;
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct wb35_reg_queue	*reg_queue;
-
-
-	/* Variable setting */
-	reg->EP0vm_state = VM_COMPLETED;
-	reg->EP0VM_status = urb->status;
-
-	if (pHwData->SurpriseRemove) { /* Let WbWlanHalt to handle surprise remove */
-		reg->EP0vm_state = VM_STOP;
-		atomic_dec(&reg->RegFireCount);
-	} else {
-		/* Complete to send, remove the URB from the first */
-		spin_lock_irq(&reg->EP0VM_spin_lock);
-		reg_queue = reg->reg_first;
-		if (reg_queue == reg->reg_last)
-			reg->reg_last = NULL;
-		reg->reg_first = reg->reg_first->Next;
-		spin_unlock_irq(&reg->EP0VM_spin_lock);
-
-		if (reg->EP0VM_status) {
-			pr_debug("EP0 IoCompleteRoutine return error\n");
-			reg->EP0vm_state = VM_STOP;
-			pHwData->SurpriseRemove = 1;
-		} else {
-			/* Success. Update the result */
-
-			/* Start the next send */
-			Wb35Reg_EP0VM(pHwData);
-		}
-
-		kfree(reg_queue);
-	}
-
-	usb_free_urb(urb);
-}
-
-
-void Wb35Reg_destroy(struct hw_data *pHwData)
-{
-	struct wb35_reg		*reg = &pHwData->reg;
-	struct urb		*urb;
-	struct wb35_reg_queue	*reg_queue;
-
-	Uxx_power_off_procedure(pHwData);
-
-	/* Wait for Reg operation completed */
-	do {
-		msleep(10); /* Delay for waiting function enter */
-	} while (reg->EP0vm_state != VM_STOP);
-	msleep(10);  /* Delay for waiting function enter */
-
-	/* Release all the data in RegQueue */
-	spin_lock_irq(&reg->EP0VM_spin_lock);
-	reg_queue = reg->reg_first;
-	while (reg_queue) {
-		if (reg_queue == reg->reg_last)
-			reg->reg_last = NULL;
-		reg->reg_first = reg->reg_first->Next;
-
-		urb = reg_queue->urb;
-		spin_unlock_irq(&reg->EP0VM_spin_lock);
-		if (urb) {
-			usb_free_urb(urb);
-			kfree(reg_queue);
-		} else {
-			pr_debug("EP0 queue release error\n");
-		}
-		spin_lock_irq(&reg->EP0VM_spin_lock);
-
-		reg_queue = reg->reg_first;
-	}
-	spin_unlock_irq(&reg->EP0VM_spin_lock);
-}
-
-/*
- * =======================================================================
- * The function can be run in passive-level only.
- * =========================================================================
- */
-unsigned char Wb35Reg_initial(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	u32 ltmp;
-	u32 SoftwareSet, VCO_trim, TxVga, Region_ScanInterval;
-
-	/* Spin lock is acquired for read and write IRP command */
-	spin_lock_init(&reg->EP0VM_spin_lock);
-
-	/* Getting RF module type from EEPROM */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x080d0000); /* Start EEPROM access + Read + address(0x0d) */
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &ltmp);
-
-	/* Update RF module type and determine the PHY type by inf or EEPROM */
-	reg->EEPROMPhyType = (u8)(ltmp & 0xff);
-	/*
-	 * 0 V MAX2825, 1 V MAX2827, 2 V MAX2828, 3 V MAX2829
-	 * 16V AL2230, 17 - AL7230, 18 - AL2230S
-	 * 32 Reserved
-	 * 33 - W89RF242(TxVGA 0~19), 34 - W89RF242(TxVGA 0~34)
-	 */
-	if (reg->EEPROMPhyType != RF_DECIDE_BY_INF) {
-		if ((reg->EEPROMPhyType == RF_MAXIM_2825)	||
-			(reg->EEPROMPhyType == RF_MAXIM_2827)	||
-			(reg->EEPROMPhyType == RF_MAXIM_2828)	||
-			(reg->EEPROMPhyType == RF_MAXIM_2829)	||
-			(reg->EEPROMPhyType == RF_MAXIM_V1)	||
-			(reg->EEPROMPhyType == RF_AIROHA_2230)	||
-			(reg->EEPROMPhyType == RF_AIROHA_2230S)	||
-			(reg->EEPROMPhyType == RF_AIROHA_7230)	||
-			(reg->EEPROMPhyType == RF_WB_242)	||
-			(reg->EEPROMPhyType == RF_WB_242_1))
-			pHwData->phy_type = reg->EEPROMPhyType;
-	}
-
-	/* Power On procedure running. The relative parameter will be set according to phy_type */
-	Uxx_power_on_procedure(pHwData);
-
-	/* Reading MAC address */
-	Uxx_ReadEthernetAddress(pHwData);
-
-	/* Read VCO trim for RF parameter */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08200000);
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &VCO_trim);
-
-	/* Read Antenna On/Off of software flag */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08210000);
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &SoftwareSet);
-
-	/* Read TXVGA */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000);
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &TxVga);
-
-	/* Get Scan interval setting from EEPROM offset 0x1c */
-	Wb35Reg_WriteSync(pHwData, 0x03b4, 0x081d0000);
-	Wb35Reg_ReadSync(pHwData, 0x03b4, &Region_ScanInterval);
-
-	/* Update Ethernet address */
-	memcpy(pHwData->CurrentMacAddress, pHwData->PermanentMacAddress, ETH_ALEN);
-
-	/* Update software variable */
-	pHwData->SoftwareSet = (u16)(SoftwareSet & 0xffff);
-	TxVga &= 0x000000ff;
-	pHwData->PowerIndexFromEEPROM = (u8)TxVga;
-	pHwData->VCO_trim = (u8)VCO_trim & 0xff;
-	if (pHwData->VCO_trim == 0xff)
-		pHwData->VCO_trim = 0x28;
-
-	reg->EEPROMRegion = (u8)(Region_ScanInterval >> 8);
-	if (reg->EEPROMRegion < 1 || reg->EEPROMRegion > 6)
-		reg->EEPROMRegion = REGION_AUTO;
-
-	/* For Get Tx VGA from EEPROM */
-	GetTxVgaFromEEPROM(pHwData);
-
-	/* Set Scan Interval */
-	pHwData->Scan_Interval = (u8)(Region_ScanInterval & 0xff) * 10;
-	if ((pHwData->Scan_Interval == 2550) || (pHwData->Scan_Interval < 10)) /* Is default setting 0xff * 10 */
-		pHwData->Scan_Interval = SCAN_MAX_CHNL_TIME;
-
-	/* Initial register */
-	RFSynthesizer_initial(pHwData);
-
-	BBProcessor_initial(pHwData); /* Async write, must wait until complete */
-
-	Wb35Reg_phy_calibration(pHwData);
-
-	Mxx_initial(pHwData);
-	Dxx_initial(pHwData);
-
-	if (pHwData->SurpriseRemove)
-		return false;
-	else
-		return true; /* Initial fail */
-}
-
-/*
- * ================================================================
- *  CardComputeCrc --
- *
- *  Description:
- *    Runs the AUTODIN II CRC algorithm on the buffers Buffer length.
- *
- *  Arguments:
- *    Buffer - the input buffer
- *    Length - the length of Buffer
- *
- *  Return Value:
- *    The 32-bit CRC value.
- * ===================================================================
- */
-u32 CardComputeCrc(u8 *Buffer, u32 Length)
-{
-	u32	Crc, Carry;
-	u32	i, j;
-	u8	CurByte;
-
-	Crc = 0xffffffff;
-
-	for (i = 0; i < Length; i++) {
-		CurByte = Buffer[i];
-		for (j = 0; j < 8; j++) {
-			Carry = ((Crc & 0x80000000) ? 1 : 0) ^ (CurByte & 0x01);
-			Crc <<= 1;
-			CurByte >>= 1;
-			if (Carry)
-				Crc = (Crc ^ 0x04c11db6) | Carry;
-		}
-	}
-	return Crc;
-}
-
-
-/*
- * ==================================================================
- * BitReverse --
- *   Reverse the bits in the input argument, dwData, which is
- *   regarded as a string of bits with the length, DataLength.
- *
- * Arguments:
- *   dwData     :
- *   DataLength :
- *
- * Return:
- *   The converted value.
- * ==================================================================
- */
-u32 BitReverse(u32 dwData, u32 DataLength)
-{
-	u32	HalfLength, i, j;
-	u32	BitA, BitB;
-
-	if (DataLength <= 0)
-		return 0;	/* No conversion is done. */
-	dwData = dwData & (0xffffffff >> (32 - DataLength));
-
-	HalfLength = DataLength / 2;
-	for (i = 0, j = DataLength - 1; i < HalfLength; i++, j--) {
-		BitA = GetBit(dwData, i);
-		BitB = GetBit(dwData, j);
-		if (BitA && !BitB) {
-			dwData = ClearBit(dwData, i);
-			dwData = SetBit(dwData, j);
-		} else if (!BitA && BitB) {
-			dwData = SetBit(dwData, i);
-			dwData = ClearBit(dwData, j);
-		} else {
-			/* Do nothing since these two bits are of the save values. */
-		}
-	}
-	return dwData;
-}
-
-void Wb35Reg_phy_calibration(struct hw_data *pHwData)
-{
-	u32	BB3c, BB54;
-
-	if ((pHwData->phy_type == RF_WB_242) ||
-		(pHwData->phy_type == RF_WB_242_1)) {
-		phy_calibration_winbond(pHwData, 2412); /* Sync operation */
-		Wb35Reg_ReadSync(pHwData, 0x103c, &BB3c);
-		Wb35Reg_ReadSync(pHwData, 0x1054, &BB54);
-
-		pHwData->BB3c_cal = BB3c;
-		pHwData->BB54_cal = BB54;
-
-		RFSynthesizer_initial(pHwData);
-		BBProcessor_initial(pHwData); /* Async operation */
-
-		Wb35Reg_WriteSync(pHwData, 0x103c, BB3c);
-		Wb35Reg_WriteSync(pHwData, 0x1054, BB54);
-	}
-}
-
-
diff --git a/drivers/staging/winbond/wb35reg_f.h b/drivers/staging/winbond/wb35reg_f.h
deleted file mode 100644
index 95dc98096845..000000000000
--- a/drivers/staging/winbond/wb35reg_f.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __WINBOND_WB35REG_F_H
-#define __WINBOND_WB35REG_F_H
-
-#include "wbhal.h"
-
-/*
- * ====================================
- * Interface function declare
- * ====================================
- */
-unsigned char Wb35Reg_initial(struct hw_data *hw_data);
-void Uxx_power_on_procedure(struct hw_data *hw_data);
-void Uxx_power_off_procedure(struct hw_data *hw_data);
-void Uxx_ReadEthernetAddress(struct hw_data *hw_data);
-void Dxx_initial(struct hw_data *hw_data);
-void Mxx_initial(struct hw_data *hw_data);
-void RFSynthesizer_initial(struct hw_data *hw_data);
-void RFSynthesizer_SwitchingChannel(struct hw_data *hw_data, struct chan_info channel);
-void BBProcessor_initial(struct hw_data *hw_data);
-void BBProcessor_RateChanging(struct hw_data *hw_data, u8 rate);
-u8 RFSynthesizer_SetPowerIndex(struct hw_data *hw_data, u8 power_index);
-u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *, u8 index);
-u8 RFSynthesizer_SetWinbond242Power(struct hw_data *, u8 index);
-void GetTxVgaFromEEPROM(struct hw_data *hw_data);
-void EEPROMTxVgaAdjust(struct hw_data *hw_data);
-
-#define RFWriteControlData(_A, _V) Wb35Reg_Write(_A, 0x0864, _V)
-
-void Wb35Reg_destroy(struct hw_data *hw_data);
-
-unsigned char Wb35Reg_Read(struct hw_data *hw_data, u16 register_no, u32 *register_value);
-unsigned char Wb35Reg_ReadSync(struct hw_data *hw_data, u16 register_no, u32 *register_value);
-unsigned char Wb35Reg_Write(struct hw_data *hw_data, u16 register_no, u32 register_value);
-unsigned char Wb35Reg_WriteSync(struct hw_data *hw_data, u16 register_no, u32 register_value);
-unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *hw_data,
-							 u16 register_no,
-							 u32 register_value,
-							 s8 *value,
-							 s8 len);
-unsigned char Wb35Reg_BurstWrite(struct hw_data *hw_data,
-					u16 register_no,
-					u32 *register_data,
-					u8 number_of_data,
-					u8 flag);
-
-void Wb35Reg_EP0VM(struct hw_data *hw_data);
-void Wb35Reg_EP0VM_start(struct hw_data *hw_data);
-void Wb35Reg_EP0VM_complete(struct urb *urb);
-
-u32 BitReverse(u32 data, u32 data_length);
-
-void CardGetMulticastBit(u8 address[MAC_ADDR_LENGTH], u8 *byte, u8 *value);
-u32 CardComputeCrc(u8 *buffer, u32 length);
-
-void Wb35Reg_phy_calibration(struct hw_data *hw_data);
-void Wb35Reg_Update(struct hw_data *hw_data, u16 register_no, u32 register_value);
-unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *hw_data);
-
-#endif
diff --git a/drivers/staging/winbond/wb35reg_s.h b/drivers/staging/winbond/wb35reg_s.h
deleted file mode 100644
index dc79faa4029f..000000000000
--- a/drivers/staging/winbond/wb35reg_s.h
+++ /dev/null
@@ -1,240 +0,0 @@
-#ifndef __WINBOND_WB35REG_S_H
-#define __WINBOND_WB35REG_S_H
-
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/atomic.h>
-
-struct hw_data;
-
-/* =========================================================================
- *
- *			HAL setting function
- *
- *		========================================
- *		|Uxx| 	|Dxx|	|Mxx|	|BB|	|RF|
- *		========================================
- *			|					|
- *		Wb35Reg_Read		Wb35Reg_Write
- *
- *		----------------------------------------
- *				WbUsb_CallUSBDASync	supplied By WbUsb module
- * ==========================================================================
- */
-#define GetBit(dwData, i)	(dwData & (0x00000001 << i))
-#define SetBit(dwData, i)	(dwData | (0x00000001 << i))
-#define ClearBit(dwData, i)	(dwData & ~(0x00000001 << i))
-
-#define	IGNORE_INCREMENT	0
-#define	AUTO_INCREMENT		0
-#define	NO_INCREMENT		1
-#define REG_DIRECTION(_x, _y)	((_y)->DIRECT == 0 ? usb_rcvctrlpipe(_x, 0) : usb_sndctrlpipe(_x, 0))
-#define REG_BUF_SIZE(_x)	((_x)->bRequest == 0x04 ? cpu_to_le16((_x)->wLength) : 4)
-
-#define BB48_DEFAULT_AL2230_11B		0x0033447c
-#define BB4C_DEFAULT_AL2230_11B		0x0A00FEFF
-#define BB48_DEFAULT_AL2230_11G		0x00332C1B
-#define BB4C_DEFAULT_AL2230_11G		0x0A00FEFF
-
-
-#define BB48_DEFAULT_WB242_11B		0x00292315	/* backoff  2dB */
-#define BB4C_DEFAULT_WB242_11B		0x0800FEFF	/* backoff  2dB */
-#define BB48_DEFAULT_WB242_11G		0x00453B24
-#define BB4C_DEFAULT_WB242_11G		0x0E00FEFF
-
-/*
- * ====================================
- *  Default setting for Mxx
- * ====================================
- */
-#define DEFAULT_CWMIN			31	/* (M2C) CWmin. Its value is in the range 0-31. */
-#define DEFAULT_CWMAX			1023	/* (M2C) CWmax. Its value is in the range 0-1023. */
-#define DEFAULT_AID			1	/* (M34) AID. Its value is in the range 1-2007. */
-
-#define DEFAULT_RATE_RETRY_LIMIT	2	/* (M38) as named */
-
-#define DEFAULT_LONG_RETRY_LIMIT	7	/* (M38) LongRetryLimit. Its value is in the range 0-15. */
-#define DEFAULT_SHORT_RETRY_LIMIT	7	/* (M38) ShortRetryLimit. Its value is in the range 0-15. */
-#define DEFAULT_PIFST			25	/* (M3C) PIFS Time. Its value is in the range 0-65535. */
-#define DEFAULT_EIFST			354	/* (M3C) EIFS Time. Its value is in the range 0-1048575. */
-#define DEFAULT_DIFST			45	/* (M3C) DIFS Time. Its value is in the range 0-65535. */
-#define DEFAULT_SIFST			5	/* (M3C) SIFS Time. Its value is in the range 0-65535. */
-#define DEFAULT_OSIFST			10	/* (M3C) Original SIFS Time. Its value is in the range 0-15. */
-#define DEFAULT_ATIMWD			0	/* (M40) ATIM Window. Its value is in the range 0-65535. */
-#define DEFAULT_SLOT_TIME		20	/* (M40) ($) SlotTime. Its value is in the range 0-255. */
-#define DEFAULT_MAX_TX_MSDU_LIFE_TIME	512	/* (M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295. */
-#define DEFAULT_BEACON_INTERVAL		500	/* (M48) Beacon Interval. Its value is in the range 0-65535. */
-#define DEFAULT_PROBE_DELAY_TIME	200	/* (M48) Probe Delay Time. Its value is in the range 0-65535. */
-#define DEFAULT_PROTOCOL_VERSION	0	/* (M4C) */
-#define DEFAULT_MAC_POWER_STATE		2	/* (M4C) 2: MAC at power active */
-#define DEFAULT_DTIM_ALERT_TIME		0
-
-
-struct wb35_reg_queue {
-	struct urb	*urb;
-	void		*pUsbReq;
-	void		*Next;
-	union {
-		u32	VALUE;
-		u32	*pBuffer;
-	};
-	u8		RESERVED[4];	/* space reserved for communication */
-	u16		INDEX;		/* For storing the register index */
-	u8		RESERVED_VALID;	/* Indicate whether the RESERVED space is valid at this command. */
-	u8		DIRECT;		/* 0:In   1:Out */
-};
-
-/*
- * ====================================
- * Internal variable for module
- * ====================================
- */
-#define MAX_SQ3_FILTER_SIZE		5
-struct wb35_reg {
-	/*
-	 * ============================
-	 *  Register Bank backup
-	 * ============================
-	 */
-	u32	U1B0;			/* bit16 record the h/w radio on/off status */
-	u32	U1BC_LEDConfigure;
-	u32	D00_DmaControl;
-	u32	M00_MacControl;
-	union {
-		struct {
-			u32	M04_MulticastAddress1;
-			u32	M08_MulticastAddress2;
-		};
-		u8		Multicast[8];	/* contents of card multicast registers */
-	};
-
-	u32	M24_MacControl;
-	u32	M28_MacControl;
-	u32	M2C_MacControl;
-	u32	M38_MacControl;
-	u32	M3C_MacControl;
-	u32	M40_MacControl;
-	u32	M44_MacControl;
-	u32	M48_MacControl;
-	u32	M4C_MacStatus;
-	u32	M60_MacControl;
-	u32	M68_MacControl;
-	u32	M70_MacControl;
-	u32	M74_MacControl;
-	u32	M78_ERPInformation;
-	u32	M7C_MacControl;
-	u32	M80_MacControl;
-	u32	M84_MacControl;
-	u32	M88_MacControl;
-	u32	M98_MacControl;
-
-	/* Baseband register */
-	u32	BB0C;	/* Used for LNA calculation */
-	u32	BB2C;
-	u32	BB30;	/* 11b acquisition control register */
-	u32	BB3C;
-	u32	BB48;
-	u32	BB4C;
-	u32	BB50;	/* mode control register */
-	u32	BB54;
-	u32	BB58;	/* IQ_ALPHA */
-	u32	BB5C;	/* For test */
-	u32	BB60;	/* for WTO read value */
-
-	/* VM */
-	spinlock_t	EP0VM_spin_lock; /* 4B */
-	u32		EP0VM_status; /* $$ */
-	struct wb35_reg_queue *reg_first;
-	struct wb35_reg_queue *reg_last;
-	atomic_t	RegFireCount;
-
-	/* Hardware status */
-	u8	EP0vm_state;
-	u8	mac_power_save;
-	u8	EEPROMPhyType; /*
-				* 0 ~ 15 for Maxim (0 ĄV MAX2825, 1 ĄV MAX2827, 2 ĄV MAX2828, 3 ĄV MAX2829),
-				* 16 ~ 31 for Airoha (16 ĄV AL2230, 11 - AL7230)
-				* 32 ~ Reserved
-				* 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
-				* 48 ~ 255 ARE RESERVED.
-				*/
-	u8	EEPROMRegion;	/* Region setting in EEPROM */
-
-	u32	SyncIoPause; /* If user use the Sync Io to access Hw, then pause the async access */
-
-	u8	LNAValue[4]; /* Table for speed up running */
-	u32	SQ3_filter[MAX_SQ3_FILTER_SIZE];
-	u32	SQ3_index;
-};
-
-/* =====================================================================
- * Function declaration
- * =====================================================================
- */
-void hal_remove_mapping_key(struct hw_data *hw_data, u8 *mac_addr);
-void hal_remove_default_key(struct hw_data *hw_data, u32 index);
-unsigned char hal_set_mapping_key(struct hw_data *adapter, u8 *mac_addr,
-				  u8 null_key, u8 wep_on, u8 *tx_tsc,
-				  u8 *rx_tsc, u8 key_type, u8 key_len,
-				  u8 *key_data);
-unsigned char hal_set_default_key(struct hw_data *adapter, u8 index,
-				  u8 null_key, u8 wep_on, u8 *tx_tsc,
-				  u8 *rx_tsc, u8 key_type, u8 key_len,
-				  u8 *key_data);
-void hal_clear_all_default_key(struct hw_data *hw_data);
-void hal_clear_all_group_key(struct hw_data *hw_data);
-void hal_clear_all_mapping_key(struct hw_data *hw_data);
-void hal_clear_all_key(struct hw_data *hw_data);
-void hal_set_power_save_mode(struct hw_data *hw_data, unsigned char power_save,
-			     unsigned char wakeup, unsigned char dtim);
-void hal_get_power_save_mode(struct hw_data *hw_data, u8 *in_pwr_save);
-void hal_set_slot_time(struct hw_data *hw_data, u8 type);
-
-#define hal_set_atim_window(_A, _ATM)
-
-void hal_start_bss(struct hw_data *hw_data, u8 mac_op_mode);
-
-/* 0:BSS STA 1:IBSS STA */
-void hal_join_request(struct hw_data *hw_data, u8 bss_type);
-
-void hal_stop_sync_bss(struct hw_data *hw_data);
-void hal_resume_sync_bss(struct hw_data *hw_data);
-void hal_set_aid(struct hw_data *hw_data, u16 aid);
-void hal_set_bssid(struct hw_data *hw_data, u8 *bssid);
-void hal_get_bssid(struct hw_data *hw_data, u8 *bssid);
-void hal_set_listen_interval(struct hw_data *hw_data, u16 listen_interval);
-void hal_set_cap_info(struct hw_data *hw_data, u16 capability_info);
-void hal_set_ssid(struct hw_data *hw_data, u8 *ssid, u8 ssid_len);
-void hal_start_tx0(struct hw_data *hw_data);
-
-#define hal_get_cwmin(_A)	((_A)->cwmin)
-
-void hal_set_cwmax(struct hw_data *hw_data, u16 cwin_max);
-
-#define hal_get_cwmax(_A)	((_A)->cwmax)
-
-void hal_set_rsn_wpa(struct hw_data *hw_data, u32 *rsn_ie_bitmap,
-		     u32 *rsn_oui_type , unsigned char desired_auth_mode);
-void hal_set_connect_info(struct hw_data *hw_data, unsigned char bo_connect);
-u8 hal_get_est_sq3(struct hw_data *hw_data, u8 count);
-void hal_descriptor_indicate(struct hw_data *hw_data,
-			     struct wb35_descriptor *des);
-u8 hal_get_antenna_number(struct hw_data *hw_data);
-u32 hal_get_bss_pk_cnt(struct hw_data *hw_data);
-
-#define hal_get_region_from_EEPROM(_A)	((_A)->reg.EEPROMRegion)
-#define hal_get_tx_buffer(_A, _B)	Wb35Tx_get_tx_buffer(_A, _B)
-#define hal_software_set(_A)		(_A->SoftwareSet)
-#define hal_driver_init_OK(_A)		(_A->IsInitOK)
-#define hal_rssi_boundary_high(_A)	(_A->RSSI_high)
-#define hal_rssi_boundary_low(_A)	(_A->RSSI_low)
-#define hal_scan_interval(_A)		(_A->Scan_Interval)
-
-#define PHY_DEBUG(msg, args...)
-
-/* return 100ms count */
-#define hal_get_time_count(_P)		(_P->time_count / 10)
-
-#define hal_ibss_disconnect(_A)		(hal_stop_sync_bss(_A))
-
-#endif
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
deleted file mode 100644
index f006b166aebc..000000000000
--- a/drivers/staging/winbond/wb35rx.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * ============================================================================
- *  Copyright (c) 1996-2002 Winbond Electronic Corporation
- *
- *  Module Name:
- *    Wb35Rx.c
- *
- *  Abstract:
- *    Processing the Rx message from down layer
- *
- * ============================================================================
- */
-#include <linux/usb.h>
-#include <linux/slab.h>
-
-#include "core.h"
-#include "wb35rx_f.h"
-
-static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress,
-	int PacketSize)
-{
-	struct wbsoft_priv *priv = hw->priv;
-	struct sk_buff *skb;
-	struct ieee80211_rx_status rx_status = {0};
-
-	if (!priv->enabled)
-		return;
-
-	skb = dev_alloc_skb(PacketSize);
-	if (!skb) {
-		printk("Not enough memory for packet, FIXME\n");
-		return;
-	}
-
-	memcpy(skb_put(skb, PacketSize), pRxBufferAddress, PacketSize);
-
-	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-	ieee80211_rx_irqsafe(hw, skb);
-}
-
-static void Wb35Rx_adjust(struct wb35_descriptor *pRxDes)
-{
-	u32	*pRxBufferAddress;
-	u32	DecryptionMethod;
-	u32	i;
-	u16	BufferSize;
-
-	DecryptionMethod = pRxDes->R01.R01_decryption_method;
-	pRxBufferAddress = pRxDes->buffer_address[0];
-	BufferSize = pRxDes->buffer_size[0];
-
-	/* Adjust the last part of data. Only data left */
-	BufferSize -= 4; /* For CRC-32 */
-	if (DecryptionMethod)
-		BufferSize -= 4;
-	if (DecryptionMethod == 3) /* For CCMP */
-		BufferSize -= 4;
-
-	/* Adjust the IV field which after 802.11 header and ICV field. */
-	if (DecryptionMethod == 1) { /* For WEP */
-		for (i = 6; i > 0; i--)
-			pRxBufferAddress[i] = pRxBufferAddress[i - 1];
-		pRxDes->buffer_address[0] = pRxBufferAddress + 1;
-		BufferSize -= 4; /* 4 byte for IV */
-	} else if (DecryptionMethod) { /* For TKIP and CCMP */
-		for (i = 7; i > 1; i--)
-			pRxBufferAddress[i] = pRxBufferAddress[i - 2];
-		/* Update the descriptor, shift 8 byte */
-		pRxDes->buffer_address[0] = pRxBufferAddress + 2;
-		BufferSize -= 8; /* 8 byte for IV + ICV */
-	}
-	pRxDes->buffer_size[0] = BufferSize;
-}
-
-static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv	*priv = hw->priv;
-	struct hw_data		*pHwData = &priv->sHwData;
-	struct wb35_descriptor	RxDes;
-	struct wb35_rx		*pWb35Rx = &pHwData->Wb35Rx;
-	u8			*pRxBufferAddress;
-	u16			PacketSize;
-	u16			stmp, BufferSize, stmp2 = 0;
-	u32			RxBufferId;
-
-	/* Only one thread be allowed to run into the following */
-	do {
-		RxBufferId = pWb35Rx->RxProcessIndex;
-		if (pWb35Rx->RxOwner[RxBufferId]) /* Owner by VM */
-			break;
-
-		pWb35Rx->RxProcessIndex++;
-		pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;
-
-		pRxBufferAddress = pWb35Rx->pDRx;
-		BufferSize = pWb35Rx->RxBufferSize[RxBufferId];
-
-		/* Parse the bulkin buffer */
-		while (BufferSize >= 4) {
-			/* Is ending? */
-			if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) ==
-				RX_END_TAG)
-				break;
-
-			/* Get the R00 R01 first */
-			RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
-			PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
-			RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress + 4)));
-			/* For new DMA 4k */
-			if ((PacketSize & 0x03) > 0)
-				PacketSize -= 4;
-
-			/* Basic check for Rx length. Is length valid? */
-			if (PacketSize > MAX_PACKET_SIZE) {
-				pr_debug("Serious ERROR : Rx data size too long, size =%d\n",
-					PacketSize);
-				pWb35Rx->EP3vm_state = VM_STOP;
-				pWb35Rx->Ep3ErrorCount2++;
-				break;
-			}
-
-			/*
-			 * Wb35Rx_indicate() is called synchronously so it isn't
-			 * necessary to set "RxDes.Desctriptor_ID = RxBufferID;"
-			 */
-			/* subtract 8 byte for 35's USB header length */
-			BufferSize -= 8;
-			pRxBufferAddress += 8;
-
-			RxDes.buffer_address[0] = pRxBufferAddress;
-			RxDes.buffer_size[0] = PacketSize;
-			RxDes.buffer_number = 1;
-			RxDes.buffer_start_index = 0;
-			RxDes.buffer_total_size = RxDes.buffer_size[0];
-			Wb35Rx_adjust(&RxDes);
-
-			packet_came(hw, pRxBufferAddress, PacketSize);
-
-			/* Move RxBuffer point to the next */
-			stmp = PacketSize + 3;
-			stmp &= ~0x03; /* 4n alignment */
-			pRxBufferAddress += stmp;
-			BufferSize -= stmp;
-			stmp2 += stmp;
-		}
-
-		/* Reclaim resource */
-		pWb35Rx->RxOwner[RxBufferId] = 1;
-	} while (true);
-	return stmp2;
-}
-
-static void Wb35Rx(struct ieee80211_hw *hw);
-
-static void Wb35Rx_Complete(struct urb *urb)
-{
-	struct ieee80211_hw	*hw = urb->context;
-	struct wbsoft_priv	*priv = hw->priv;
-	struct hw_data		*pHwData = &priv->sHwData;
-	struct wb35_rx		*pWb35Rx = &pHwData->Wb35Rx;
-	u8			*pRxBufferAddress;
-	u32			SizeCheck;
-	u16			BulkLength;
-	u32			RxBufferId;
-	struct R00_descriptor		R00;
-
-	/* Variable setting */
-	pWb35Rx->EP3vm_state = VM_COMPLETED;
-	pWb35Rx->EP3VM_status = urb->status; /* Store the last result of Irp */
-
-	RxBufferId = pWb35Rx->CurrentRxBufferId;
-
-	pRxBufferAddress = pWb35Rx->pDRx;
-	BulkLength = (u16)urb->actual_length;
-
-	/* The IRP is completed */
-	pWb35Rx->EP3vm_state = VM_COMPLETED;
-
-	if (pHwData->SurpriseRemove) /* Must be here, or RxBufferId is invalid */
-		goto error;
-
-	if (pWb35Rx->rx_halt)
-		goto error;
-
-	/* Start to process the data only in successful condition */
-	pWb35Rx->RxOwner[RxBufferId] = 0; /* Set the owner to driver */
-	R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
-
-	/* The URB is completed, check the result */
-	if (pWb35Rx->EP3VM_status != 0) {
-		pr_debug("EP3 IoCompleteRoutine return error\n");
-		pWb35Rx->EP3vm_state = VM_STOP;
-		goto error;
-	}
-
-	/* For recovering. check if operating in single USB mode */
-	if (!HAL_USB_MODE_BURST(pHwData)) {
-		SizeCheck = R00.R00_receive_byte_count;
-		if ((SizeCheck & 0x03) > 0)
-			SizeCheck -= 4;
-		SizeCheck = (SizeCheck + 3) & ~0x03;
-		SizeCheck += 12; /* 8 + 4 badbeef */
-		if ((BulkLength > 1600) ||
-			(SizeCheck > 1600) ||
-			(BulkLength != SizeCheck) ||
-			(BulkLength == 0)) { /* Add for fail Urb */
-			pWb35Rx->EP3vm_state = VM_STOP;
-			pWb35Rx->Ep3ErrorCount2++;
-		}
-	}
-
-	/* Indicating the receiving data */
-	pWb35Rx->ByteReceived += BulkLength;
-	pWb35Rx->RxBufferSize[RxBufferId] = BulkLength;
-
-	if (!pWb35Rx->RxOwner[RxBufferId])
-		Wb35Rx_indicate(hw);
-
-	kfree(pWb35Rx->pDRx);
-	/* Do the next receive */
-	Wb35Rx(hw);
-	return;
-
-error:
-	pWb35Rx->RxOwner[RxBufferId] = 1; /* Set the owner to hardware */
-	atomic_dec(&pWb35Rx->RxFireCounter);
-	pWb35Rx->EP3vm_state = VM_STOP;
-}
-
-/* This function cannot reentrain */
-static void Wb35Rx(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv	*priv = hw->priv;
-	struct hw_data		*pHwData = &priv->sHwData;
-	struct wb35_rx		*pWb35Rx = &pHwData->Wb35Rx;
-	u8			*pRxBufferAddress;
-	struct urb		*urb = pWb35Rx->RxUrb;
-	int			retv;
-	u32			RxBufferId;
-
-	/* Issuing URB */
-	if (pHwData->SurpriseRemove)
-		goto error;
-
-	if (pWb35Rx->rx_halt)
-		goto error;
-
-	/* Get RxBuffer's ID */
-	RxBufferId = pWb35Rx->RxBufferId;
-	if (!pWb35Rx->RxOwner[RxBufferId]) {
-		/* It's impossible to run here. */
-		pr_debug("Rx driver fifo unavailable\n");
-		goto error;
-	}
-
-	/* Update buffer point, then start to bulkin the data from USB */
-	pWb35Rx->RxBufferId++;
-	pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
-
-	pWb35Rx->CurrentRxBufferId = RxBufferId;
-
-	pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC);
-	if (!pWb35Rx->pDRx) {
-		dev_info(&hw->wiphy->dev, "w35und: Rx memory alloc failed\n");
-		goto error;
-	}
-	pRxBufferAddress = pWb35Rx->pDRx;
-
-	usb_fill_bulk_urb(urb, pHwData->udev,
-			  usb_rcvbulkpipe(pHwData->udev, 3),
-			  pRxBufferAddress, MAX_USB_RX_BUFFER,
-			  Wb35Rx_Complete, hw);
-
-	pWb35Rx->EP3vm_state = VM_RUNNING;
-
-	retv = usb_submit_urb(urb, GFP_ATOMIC);
-
-	if (retv != 0) {
-		dev_info(&hw->wiphy->dev, "Rx URB sending error\n");
-		goto error;
-	}
-	return;
-
-error:
-	/* VM stop */
-	pWb35Rx->EP3vm_state = VM_STOP;
-	atomic_dec(&pWb35Rx->RxFireCounter);
-}
-
-void Wb35Rx_start(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv	*priv = hw->priv;
-	struct hw_data		*pHwData = &priv->sHwData;
-	struct wb35_rx		*pWb35Rx = &pHwData->Wb35Rx;
-
-	/* Allow only one thread to run into the Wb35Rx() function */
-	if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) {
-		pWb35Rx->EP3vm_state = VM_RUNNING;
-		Wb35Rx(hw);
-	} else
-		atomic_dec(&pWb35Rx->RxFireCounter);
-}
-
-static void Wb35Rx_reset_descriptor(struct hw_data *pHwData)
-{
-	struct wb35_rx	*pWb35Rx = &pHwData->Wb35Rx;
-	u32		i;
-
-	pWb35Rx->ByteReceived = 0;
-	pWb35Rx->RxProcessIndex = 0;
-	pWb35Rx->RxBufferId = 0;
-	pWb35Rx->EP3vm_state = VM_STOP;
-	pWb35Rx->rx_halt = 0;
-
-	/* Initial the Queue. The last buffer is reserved for used
-	 * if the Rx resource is unavailable.
-	 */
-	for (i = 0; i < MAX_USB_RX_BUFFER_NUMBER; i++)
-		pWb35Rx->RxOwner[i] = 1;
-}
-
-unsigned char Wb35Rx_initial(struct hw_data *pHwData)
-{
-	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
-
-	/* Initial the Buffer Queue */
-	Wb35Rx_reset_descriptor(pHwData);
-
-	pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC);
-	return !!pWb35Rx->RxUrb;
-}
-
-void Wb35Rx_stop(struct hw_data *pHwData)
-{
-	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
-
-	/* Canceling the Irp if already sends it out. */
-	if (pWb35Rx->EP3vm_state == VM_RUNNING) {
-		/* Only use unlink, let Wb35Rx_destroy to free them */
-		usb_unlink_urb(pWb35Rx->RxUrb);
-		pr_debug("EP3 Rx stop\n");
-	}
-}
-
-/* Needs process context */
-void Wb35Rx_destroy(struct hw_data *pHwData)
-{
-	struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
-
-	do {
-		msleep(10); /* Delay for waiting function enter */
-	} while (pWb35Rx->EP3vm_state != VM_STOP);
-	msleep(10); /* Delay for waiting function exit */
-
-	usb_free_urb(pWb35Rx->RxUrb);
-	pr_debug("Wb35Rx_destroy OK\n");
-}
-
diff --git a/drivers/staging/winbond/wb35rx_f.h b/drivers/staging/winbond/wb35rx_f.h
deleted file mode 100644
index 559bdca12e1a..000000000000
--- a/drivers/staging/winbond/wb35rx_f.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __WINBOND_WB35RX_F_H
-#define __WINBOND_WB35RX_F_H
-
-#include <net/mac80211.h>
-#include "wbhal.h"
-
-/*
- * Interface function declaration
- */
-unsigned char	Wb35Rx_initial(struct hw_data *pHwData);
-void		Wb35Rx_destroy(struct hw_data *pHwData);
-void		Wb35Rx_stop(struct hw_data *pHwData);
-void		Wb35Rx_start(struct ieee80211_hw *hw);
-
-#endif
diff --git a/drivers/staging/winbond/wb35rx_s.h b/drivers/staging/winbond/wb35rx_s.h
deleted file mode 100644
index 545bc9500723..000000000000
--- a/drivers/staging/winbond/wb35rx_s.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __WINBOND_35RX_S_H
-#define __WINBOND_35RX_S_H
-
-/* Definition for this module used */
-#define MAX_USB_RX_BUFFER		4096	/* This parameter must be 4096 931130.4.f */
-#define MAX_USB_RX_BUFFER_NUMBER	ETHERNET_RX_DESCRIPTORS	/* Maximum 254, 255 is RESERVED ID */
-#define RX_INTERFACE			0	/* Interface 1 */
-#define RX_PIPE				2	/* Pipe 3 */
-#define MAX_PACKET_SIZE			1600	/* 1568	= 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g */
-#define RX_END_TAG			0x0badbeef
-
-
-/*
- * Internal variable for module
- */
-struct wb35_rx {
-	u32		ByteReceived; /* For calculating throughput of BulkIn */
-	atomic_t	RxFireCounter;/* Does Wb35Rx module fire? */
-
-	u8		RxBuffer[MAX_USB_RX_BUFFER_NUMBER][((MAX_USB_RX_BUFFER+3) & ~0x03)];
-	u16		RxBufferSize[((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01)];
-	u8		RxOwner[((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03)]; /* Ownership of buffer  0:SW 1:HW */
-
-	u32		RxProcessIndex; /* The next index to process */
-	u32		RxBufferId;
-	u32		EP3vm_state;
-
-	u32		rx_halt; /* For VM stopping */
-
-	u16		MoreDataSize;
-	u16		PacketSize;
-
-	u32		CurrentRxBufferId; /* For complete routine usage */
-	u32		Rx3UrbCancel;
-
-	u32		LastR1; /* For RSSI reporting */
-	struct urb	*RxUrb;
-	u32		Ep3ErrorCount2; /* 20060625.1 Usbd for Rx DMA error count */
-
-	int		EP3VM_status;
-	u8		*pDRx;
-};
-
-#endif /* __WINBOND_35RX_S_H */
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
deleted file mode 100644
index 870cff39a226..000000000000
--- a/drivers/staging/winbond/wb35tx.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- *  Copyright (c) 1996-2002 Winbond Electronic Corporation
- *
- *  Module Name:
- *    Wb35Tx.c
- *
- *  Abstract:
- *    Processing the Tx message and put into down layer
- *
- */
-#include <linux/usb.h>
-#include <linux/gfp.h>
-
-#include "wb35tx_f.h"
-#include "mds_f.h"
-
-unsigned char
-Wb35Tx_get_tx_buffer(struct hw_data *pHwData, u8 **pBuffer)
-{
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	*pBuffer = pWb35Tx->TxBuffer[0];
-	return true;
-}
-
-static void Wb35Tx(struct wbsoft_priv *adapter);
-
-static void Wb35Tx_complete(struct urb *pUrb)
-{
-	struct wbsoft_priv *adapter = pUrb->context;
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	struct wb35_mds *pMds = &adapter->Mds;
-
-	printk("wb35: tx complete\n");
-	/* Variable setting */
-	pWb35Tx->EP4vm_state = VM_COMPLETED;
-	pWb35Tx->EP4VM_status = pUrb->status; /* Store the last result of Irp */
-	/* Set the owner. Free the owner bit always. */
-	pMds->TxOwner[pWb35Tx->TxSendIndex] = 0;
-	pWb35Tx->TxSendIndex++;
-	pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER;
-
-	if (pHwData->SurpriseRemove) /* Let WbWlanHalt handle surprise remove */
-		goto error;
-
-	if (pWb35Tx->tx_halt)
-		goto error;
-
-	/* The URB is completed, check the result */
-	if (pWb35Tx->EP4VM_status != 0) {
-		dev_err(&pUrb->dev->dev, "URB submission failed\n");
-		pWb35Tx->EP4vm_state = VM_STOP;
-		goto error;
-	}
-
-	Mds_Tx(adapter);
-	Wb35Tx(adapter);
-	return;
-
-error:
-	atomic_dec(&pWb35Tx->TxFireCounter);
-	pWb35Tx->EP4vm_state = VM_STOP;
-}
-
-static void Wb35Tx(struct wbsoft_priv *adapter)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	u8		*pTxBufferAddress;
-	struct wb35_mds *pMds = &adapter->Mds;
-	struct urb *pUrb = (struct urb *)pWb35Tx->Tx4Urb;
-	int		retv;
-	u32		SendIndex;
-
-	if (pHwData->SurpriseRemove)
-		goto cleanup;
-
-	if (pWb35Tx->tx_halt)
-		goto cleanup;
-
-	/* Ownership checking */
-	SendIndex = pWb35Tx->TxSendIndex;
-	/* No more data need to be sent, return immediately */
-	if (!pMds->TxOwner[SendIndex])
-		goto cleanup;
-
-	pTxBufferAddress = pWb35Tx->TxBuffer[SendIndex];
-
-	/* Issuing URB */
-	usb_fill_bulk_urb(pUrb, pHwData->udev,
-			  usb_sndbulkpipe(pHwData->udev, 4),
-			  pTxBufferAddress, pMds->TxBufferSize[SendIndex],
-			  Wb35Tx_complete, adapter);
-
-	pWb35Tx->EP4vm_state = VM_RUNNING;
-	retv = usb_submit_urb(pUrb, GFP_ATOMIC);
-	if (retv < 0) {
-		dev_err(&pUrb->dev->dev, "EP4 Tx Irp sending error\n");
-		goto cleanup;
-	}
-
-	/* Check if driver needs issue Irp for EP2 */
-	pWb35Tx->TxFillCount += pMds->TxCountInBuffer[SendIndex];
-	if (pWb35Tx->TxFillCount > 12)
-		Wb35Tx_EP2VM_start(adapter);
-
-	pWb35Tx->ByteTransfer += pMds->TxBufferSize[SendIndex];
-	return;
-
- cleanup:
-	pWb35Tx->EP4vm_state = VM_STOP;
-	atomic_dec(&pWb35Tx->TxFireCounter);
-}
-
-void Wb35Tx_start(struct wbsoft_priv *adapter)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	/* Allow only one thread to run into function */
-	if (atomic_inc_return(&pWb35Tx->TxFireCounter) == 1) {
-		pWb35Tx->EP4vm_state = VM_RUNNING;
-		Wb35Tx(adapter);
-	} else
-		atomic_dec(&pWb35Tx->TxFireCounter);
-}
-
-unsigned char Wb35Tx_initial(struct hw_data *pHwData)
-{
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	pWb35Tx->Tx4Urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!pWb35Tx->Tx4Urb)
-		return false;
-
-	pWb35Tx->Tx2Urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!pWb35Tx->Tx2Urb) {
-		usb_free_urb(pWb35Tx->Tx4Urb);
-		return false;
-	}
-
-	return true;
-}
-
-void Wb35Tx_stop(struct hw_data *pHwData)
-{
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	/* Try to cancel the Trp of EP2 */
-	if (pWb35Tx->EP2vm_state == VM_RUNNING)
-		/* Only use unlink, let Wb35Tx_destroy free them */
-		usb_unlink_urb(pWb35Tx->Tx2Urb);
-	pr_debug("EP2 Tx stop\n");
-
-	/* Try to cancel the Irp of EP4 */
-	if (pWb35Tx->EP4vm_state == VM_RUNNING)
-		/* Only use unlink, let Wb35Tx_destroy free them */
-		usb_unlink_urb(pWb35Tx->Tx4Urb);
-	pr_debug("EP4 Tx stop\n");
-}
-
-void Wb35Tx_destroy(struct hw_data *pHwData)
-{
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	/* Wait for VM stop */
-	do {
-		msleep(10); /* Delay for waiting function enter 940623.1.a */
-	} while ((pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP));
-	msleep(10); /* Delay for waiting function enter 940623.1.b */
-
-	usb_free_urb(pWb35Tx->Tx4Urb);
-	usb_free_urb(pWb35Tx->Tx2Urb);
-
-	pr_debug("Wb35Tx_destroy OK\n");
-}
-
-void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 TimeCount)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	bool Trigger = false;
-
-	if (pWb35Tx->TxTimer > TimeCount)
-		Trigger = true;
-	else if (TimeCount > (pWb35Tx->TxTimer+500))
-		Trigger = true;
-
-	if (Trigger) {
-		pWb35Tx->TxTimer = TimeCount;
-		Wb35Tx_EP2VM_start(adapter);
-	}
-}
-
-static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter);
-
-static void Wb35Tx_EP2VM_complete(struct urb *pUrb)
-{
-	struct wbsoft_priv *adapter = pUrb->context;
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct T02_descriptor	T02, TSTATUS;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	u32 *pltmp = (u32 *)pWb35Tx->EP2_buf;
-	u32		i;
-	u16		InterruptInLength;
-
-	/* Variable setting */
-	pWb35Tx->EP2vm_state = VM_COMPLETED;
-	pWb35Tx->EP2VM_status = pUrb->status;
-
-	/* For Linux 2.4. Interrupt will always trigger */
-	if (pHwData->SurpriseRemove) /* Let WbWlanHalt handle surprise remove */
-		goto error;
-
-	if (pWb35Tx->tx_halt)
-		goto error;
-
-	/* The Urb is completed, check the result */
-	if (pWb35Tx->EP2VM_status != 0) {
-		dev_err(&pUrb->dev->dev, "EP2 IoCompleteRoutine return error\n");
-		pWb35Tx->EP2vm_state = VM_STOP;
-		goto error;
-	}
-
-	/* Update the Tx result */
-	InterruptInLength = pUrb->actual_length;
-	/* Modify for minimum memory access and DWORD alignment. */
-	T02.value = cpu_to_le32(pltmp[0]) >> 8; /* [31:8] -> [24:0] */
-	InterruptInLength -= 1; /* 20051221.1.c Modify the follow for more stable */
-	InterruptInLength >>= 2; /* InterruptInLength/4 */
-	for (i = 1; i <= InterruptInLength; i++) {
-		T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24);
-
-		TSTATUS.value = T02.value;  /* 20061009 anson's endian */
-		Mds_SendComplete(adapter, &TSTATUS);
-		T02.value = cpu_to_le32(pltmp[i]) >> 8;
-	}
-
-	return;
-error:
-	atomic_dec(&pWb35Tx->TxResultCount);
-	pWb35Tx->EP2vm_state = VM_STOP;
-}
-
-static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-	struct urb *pUrb = (struct urb *)pWb35Tx->Tx2Urb;
-	u32 *pltmp = (u32 *)pWb35Tx->EP2_buf;
-	int		retv;
-
-	if (pHwData->SurpriseRemove)
-		goto error;
-
-	if (pWb35Tx->tx_halt)
-		goto error;
-
-	/* Issuing URB */
-	usb_fill_int_urb(pUrb, pHwData->udev, usb_rcvintpipe(pHwData->udev, 2),
-			 pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete,
-			 adapter, 32);
-
-	pWb35Tx->EP2vm_state = VM_RUNNING;
-	retv = usb_submit_urb(pUrb, GFP_ATOMIC);
-
-	if (retv < 0) {
-		pr_debug("EP2 Tx Irp sending error\n");
-		goto error;
-	}
-
-	return;
-error:
-	pWb35Tx->EP2vm_state = VM_STOP;
-	atomic_dec(&pWb35Tx->TxResultCount);
-}
-
-void Wb35Tx_EP2VM_start(struct wbsoft_priv *adapter)
-{
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
-
-	/* Allow only one thread to run into function */
-	if (atomic_inc_return(&pWb35Tx->TxResultCount) == 1) {
-		pWb35Tx->EP2vm_state = VM_RUNNING;
-		Wb35Tx_EP2VM(adapter);
-	} else
-		atomic_dec(&pWb35Tx->TxResultCount);
-}
diff --git a/drivers/staging/winbond/wb35tx_f.h b/drivers/staging/winbond/wb35tx_f.h
deleted file mode 100644
index 018fd35e815d..000000000000
--- a/drivers/staging/winbond/wb35tx_f.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __WINBOND_WB35TX_F_H
-#define __WINBOND_WB35TX_F_H
-
-#include "core.h"
-
-/*
- * ====================================
- * Interface function declare
- * ====================================
- */
-unsigned char Wb35Tx_initial(struct hw_data *hw_data);
-void Wb35Tx_destroy(struct hw_data *hw_data);
-unsigned char Wb35Tx_get_tx_buffer(struct hw_data *hw_data, u8 **buffer);
-
-void Wb35Tx_EP2VM_start(struct wbsoft_priv *adapter);
-
-void Wb35Tx_start(struct wbsoft_priv *adapter);
-void Wb35Tx_stop(struct hw_data *hw_data);
-
-void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 time_count);
-
-#endif
diff --git a/drivers/staging/winbond/wb35tx_s.h b/drivers/staging/winbond/wb35tx_s.h
deleted file mode 100644
index dc120085d528..000000000000
--- a/drivers/staging/winbond/wb35tx_s.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __WINBOND_WB35_TX_S_H
-#define __WINBOND_WB35_TX_S_H
-
-#include "mds_s.h"
-
-/* IS89C35 Tx related definition */
-#define TX_INTERFACE		0	/* Interface 1 */
-#define TX_PIPE			3	/* Endpoint 4 */
-#define TX_INTERRUPT		1	/* Endpoint 2 */
-#define MAX_INTERRUPT_LENGTH	64	/* It must be 64 for EP2 hardware */
-
-/* Internal variable for module */
-struct wb35_tx {
-	/* For Tx buffer */
-	u8	TxBuffer[MAX_USB_TX_BUFFER_NUMBER][MAX_USB_TX_BUFFER];
-
-	/* For Interrupt pipe */
-	u8	EP2_buf[MAX_INTERRUPT_LENGTH];
-
-	atomic_t	TxResultCount; /* For thread control of EP2 931130.4.m */
-	atomic_t	TxFireCounter; /* For thread control of EP4 931130.4.n */
-	u32		ByteTransfer;
-
-	u32	TxSendIndex; /* The next index of Mds array to be sent */
-	u32	EP2vm_state; /* for EP2vm state */
-	u32	EP4vm_state; /* for EP4vm state */
-	u32	tx_halt; /* Stopping VM */
-
-	struct urb	*Tx4Urb;
-	struct urb	*Tx2Urb;
-
-	int		EP2VM_status;
-	int		EP4VM_status;
-
-	u32	TxFillCount; /* 20060928 */
-	u32	TxTimer; /* 20060928 Add if sending packet is greater than 13 */
-};
-
-#endif
diff --git a/drivers/staging/winbond/wbhal.h b/drivers/staging/winbond/wbhal.h
deleted file mode 100644
index 289ee549146d..000000000000
--- a/drivers/staging/winbond/wbhal.h
+++ /dev/null
@@ -1,513 +0,0 @@
-#ifndef __WINBOND_WBHAL_S_H
-#define __WINBOND_WBHAL_S_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h> /* for ETH_ALEN */
-
-#define HAL_LED_SET_MASK	0x001c
-#define HAL_LED_SET_SHIFT	2
-
-/* supported RF type */
-#define RF_MAXIM_2825		0
-#define RF_MAXIM_2827		1
-#define RF_MAXIM_2828		2
-#define RF_MAXIM_2829		3
-#define RF_MAXIM_V1		15
-#define RF_AIROHA_2230		16
-#define RF_AIROHA_7230		17
-#define RF_AIROHA_2230S		18
-#define RF_WB_242		33
-#define RF_WB_242_1		34
-#define RF_DECIDE_BY_INF	255
-
-/*
- * ----------------------------------------------------------------
- * The follow define connect to upper layer
- *	User must modify for connection between HAL and upper layer
- * ----------------------------------------------------------------
- */
-
-/*
- * ==============================
- * Common define
- * ==============================
- */
-/* Bit 5 */
-#define HAL_USB_MODE_BURST(_H)			(_H->SoftwareSet & 0x20)
-
-/* Scan interval */
-#define SCAN_MAX_CHNL_TIME			(50)
-
-/* For TxL2 Frame typr recognise */
-#define FRAME_TYPE_802_3_DATA			0
-#define FRAME_TYPE_802_11_MANAGEMENT		1
-#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE	2
-#define FRAME_TYPE_802_11_CONTROL		3
-#define FRAME_TYPE_802_11_DATA			4
-#define FRAME_TYPE_PROMISCUOUS			5
-
-/* The follow definition is used for convert the frame------------ */
-#define DOT_11_SEQUENCE_OFFSET			22 /* Sequence control offset */
-#define DOT_3_TYPE_OFFSET			12
-#define DOT_11_MAC_HEADER_SIZE			24
-#define DOT_11_SNAP_SIZE			6
-#define DOT_11_TYPE_OFFSET			30 /* The start offset of 802.11 Frame. Type encapsulation. */
-#define DEFAULT_SIFSTIME			10
-#define DEFAULT_FRAGMENT_THRESHOLD		2346 /* No fragment */
-#define DEFAULT_MSDU_LIFE_TIME			0xffff
-
-#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME		(144 + 48)
-#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME		(72 + 24)
-#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION	(16 + 4 + 6)
-#define Tsym						4
-
-/*  Frame Type of Bits (2, 3)----------------------------------- */
-#define MAC_TYPE_MANAGEMENT			0x00
-#define MAC_TYPE_CONTROL			0x04
-#define MAC_TYPE_DATA				0x08
-#define MASK_FRAGMENT_NUMBER			0x000F
-#define SEQUENCE_NUMBER_SHIFT			4
-
-#define  HAL_WOL_TYPE_WAKEUP_FRAME		0x01
-#define  HAL_WOL_TYPE_MAGIC_PACKET		0x02
-
-#define HAL_KEYTYPE_WEP40			0
-#define HAL_KEYTYPE_WEP104			1
-#define HAL_KEYTYPE_TKIP			2 /* 128 bit key */
-#define HAL_KEYTYPE_AES_CCMP			3 /* 128 bit key */
-
-/* For VM state */
-enum {
-	VM_STOP = 0,
-	VM_RUNNING,
-	VM_COMPLETED
-};
-
-/*
- * ================================
- * Normal Key table format
- * ================================
- */
-
-/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
-#define MAX_KEY_TABLE			24 /* 24 entry for storing key data */
-#define GROUP_KEY_START_INDEX		4
-#define MAPPING_KEY_START_INDEX		8
-
-/*
- * =========================================
- * Descriptor
- * =========================================
- */
-#define MAX_DESCRIPTOR_BUFFER_INDEX	8 /* Have to multiple of 2 */
-#define FLAG_ERROR_TX_MASK		0x000000bf
-#define FLAG_ERROR_RX_MASK		0x0000083f
-
-#define FLAG_BAND_RX_MASK		0x10000000 /* Bit 28 */
-
-struct R00_descriptor {
-	union {
-		u32	value;
-#ifdef _BIG_ENDIAN_
-		struct {
-			u32	R00_packet_or_buffer_status:1;
-			u32	R00_packet_in_fifo:1;
-			u32	R00_RESERVED:2;
-			u32	R00_receive_byte_count:12;
-			u32	R00_receive_time_index:16;
-		};
-#else
-		struct {
-			u32	R00_receive_time_index:16;
-			u32	R00_receive_byte_count:12;
-			u32	R00_RESERVED:2;
-			u32	R00_packet_in_fifo:1;
-			u32	R00_packet_or_buffer_status:1;
-		};
-#endif
-	};
-};
-
-struct T00_descriptor {
-	union {
-		u32	value;
-#ifdef _BIG_ENDIAN_
-		struct {
-			u32	T00_first_mpdu:1; /* for hardware use */
-			u32	T00_last_mpdu:1; /* for hardware use */
-			u32	T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
-			u32	T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
-			u32	T00_RESERVED_ID:2;/* 3 bit ID reserved */
-			u32	T00_tx_packet_id:4;
-			u32	T00_RESERVED:4;
-			u32	T00_header_length:6;
-			u32	T00_frame_length:12;
-		};
-#else
-		struct {
-			u32	T00_frame_length:12;
-			u32	T00_header_length:6;
-			u32	T00_RESERVED:4;
-			u32	T00_tx_packet_id:4;
-			u32	T00_RESERVED_ID:2; /* 3 bit ID reserved */
-			u32	T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
-			u32	T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
-			u32	T00_last_mpdu:1; /* for hardware use */
-			u32	T00_first_mpdu:1; /* for hardware use */
-		};
-#endif
-	};
-};
-
-struct R01_descriptor {
-	union {
-		u32	value;
-#ifdef _BIG_ENDIAN_
-		struct {
-			u32	R01_RESERVED:3;
-			u32	R01_mod_type:1;
-			u32	R01_pre_type:1;
-			u32	R01_data_rate:3;
-			u32	R01_AGC_state:8;
-			u32	R01_LNA_state:2;
-			u32	R01_decryption_method:2;
-			u32	R01_mic_error:1;
-			u32	R01_replay:1;
-			u32	R01_broadcast_frame:1;
-			u32	R01_multicast_frame:1;
-			u32	R01_directed_frame:1;
-			u32	R01_receive_frame_antenna_selection:1;
-			u32	R01_frame_receive_during_atim_window:1;
-			u32	R01_protocol_version_error:1;
-			u32	R01_authentication_frame_icv_error:1;
-			u32	R01_null_key_to_authentication_frame:1;
-			u32	R01_icv_error:1;
-			u32	R01_crc_error:1;
-		};
-#else
-		struct {
-			u32	R01_crc_error:1;
-			u32	R01_icv_error:1;
-			u32	R01_null_key_to_authentication_frame:1;
-			u32	R01_authentication_frame_icv_error:1;
-			u32	R01_protocol_version_error:1;
-			u32	R01_frame_receive_during_atim_window:1;
-			u32	R01_receive_frame_antenna_selection:1;
-			u32	R01_directed_frame:1;
-			u32	R01_multicast_frame:1;
-			u32	R01_broadcast_frame:1;
-			u32	R01_replay:1;
-			u32	R01_mic_error:1;
-			u32	R01_decryption_method:2;
-			u32	R01_LNA_state:2;
-			u32	R01_AGC_state:8;
-			u32	R01_data_rate:3;
-			u32	R01_pre_type:1;
-			u32	R01_mod_type:1;
-			u32	R01_RESERVED:3;
-		};
-#endif
-	};
-};
-
-struct T01_descriptor {
-	union {
-		u32	value;
-#ifdef _BIG_ENDIAN_
-		struct {
-			u32	T01_rts_cts_duration:16;
-			u32	T01_fall_back_rate:3;
-			u32	T01_add_rts:1;
-			u32	T01_add_cts:1;
-			u32	T01_modulation_type:1;
-			u32	T01_plcp_header_length:1;
-			u32	T01_transmit_rate:3;
-			u32	T01_wep_id:2;
-			u32	T01_add_challenge_text:1;
-			u32	T01_inhibit_crc:1;
-			u32	T01_loop_back_wep_mode:1;
-			u32	T01_retry_abort_enable:1;
-		};
-#else
-		struct {
-			u32	T01_retry_abort_enable:1;
-			u32	T01_loop_back_wep_mode:1;
-			u32	T01_inhibit_crc:1;
-			u32	T01_add_challenge_text:1;
-			u32	T01_wep_id:2;
-			u32	T01_transmit_rate:3;
-			u32	T01_plcp_header_length:1;
-			u32	T01_modulation_type:1;
-			u32	T01_add_cts:1;
-			u32	T01_add_rts:1;
-			u32	T01_fall_back_rate:3;
-			u32	T01_rts_cts_duration:16;
-		};
-#endif
-	};
-};
-
-struct T02_descriptor {
-	union {
-		u32	value;
-#ifdef _BIG_ENDIAN_
-		struct {
-			u32	T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
-			u32	T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
-			u32	T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
-			u32	T02_Tx_PktID:4;
-			u32	T02_MPDU_Cnt:4;
-			u32	T02_RTS_Cnt:4;
-			u32	T02_RESERVED:7;
-			u32	T02_transmit_complete:1;
-			u32	T02_transmit_abort_due_to_TBTT:1;
-			u32	T02_effective_transmission_rate:1;
-			u32	T02_transmit_without_encryption_due_to_wep_on_false:1;
-			u32	T02_discard_due_to_null_wep_key:1;
-			u32	T02_RESERVED_1:1;
-			u32	T02_out_of_MaxTxMSDULiftTime:1;
-			u32	T02_transmit_abort:1;
-			u32	T02_transmit_fail:1;
-		};
-#else
-		struct {
-			u32	T02_transmit_fail:1;
-			u32	T02_transmit_abort:1;
-			u32	T02_out_of_MaxTxMSDULiftTime:1;
-			u32	T02_RESERVED_1:1;
-			u32	T02_discard_due_to_null_wep_key:1;
-			u32	T02_transmit_without_encryption_due_to_wep_on_false:1;
-			u32	T02_effective_transmission_rate:1;
-			u32	T02_transmit_abort_due_to_TBTT:1;
-			u32	T02_transmit_complete:1;
-			u32	T02_RESERVED:7;
-			u32	T02_RTS_Cnt:4;
-			u32	T02_MPDU_Cnt:4;
-			u32	T02_Tx_PktID:4;
-			u32	T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
-			u32	T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
-			u32	T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
-		};
-#endif
-	};
-};
-
-struct wb35_descriptor { /* Skip length = 8 DWORD */
-	/* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
-	u8	Descriptor_ID;
-	/* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
-	u8	RESERVED[3];
-
-	u16	FragmentThreshold;
-	u8	InternalUsed; /* Only can be used by operation of descriptor definition */
-	u8	Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
-
-	u8	PreambleMode;/* 0: short 1:long */
-	u8	TxRate;
-	u8	FragmentCount;
-	u8	EapFix; /* For speed up key install */
-
-	/* For R00 and T00 ------------------------------ */
-	union {
-		struct R00_descriptor	R00;
-		struct T00_descriptor	T00;
-	};
-
-	/* For R01 and T01 ------------------------------ */
-	union {
-		struct R01_descriptor	R01;
-		struct T01_descriptor	T01;
-	};
-
-	/* For R02 and T02 ------------------------------ */
-	union {
-		u32		R02;
-		struct T02_descriptor	T02;
-	};
-
-	/* For R03 and T03 ------------------------------ */
-	/* For software used */
-	union {
-		u32	R03;
-		u32	T03;
-		struct {
-			u8	buffer_number;
-			u8	buffer_start_index;
-			u16	buffer_total_size;
-		};
-	};
-
-	/* For storing the buffer */
-	u16	buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
-	void	*buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
-};
-
-#define MAX_TXVGA_EEPROM		9	/* How many word(u16) of EEPROM will be used for TxVGA */
-#define MAX_RF_PARAMETER		32
-
-struct txvga_for_50 {
-	u8	ChanNo;
-	u8	TxVgaValue;
-};
-
-/*
- * ==============================================
- * Device related include
- * ==============================================
- */
-
-#include "wb35reg_s.h"
-#include "wb35tx_s.h"
-#include "wb35rx_s.h"
-
-/* For Hal using ============================================ */
-struct hw_data {
-	/* For compatible with 33 */
-	u32	revision;
-	u32	BB3c_cal; /* The value for Tx calibration comes from EEPROM */
-	u32	BB54_cal; /* The value for Rx calibration comes from EEPROM */
-
-	/* For surprise remove */
-	u32	SurpriseRemove; /* 0: Normal 1: Surprise remove */
-	u8	IsKeyPreSet;
-	u8	CalOneTime;
-
-	u8	VCO_trim;
-
-	u32	FragCount;
-	u32	DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
-
-	/*
-	 * ===============================================
-	 * Definition for MAC address
-	 * ===============================================
-	 */
-	u8	PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
-	u8	CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
-
-	/*
-	 * =========================================
-	 * Definition for 802.11
-	 * =========================================
-	 */
-	u8	*bssid_pointer; /* Used by hal_get_bssid for return value */
-	u8	bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
-	u8	ssid[32]; /* maximum ssid length is 32 byte */
-
-	u16	AID;
-	u8	ssid_length;
-	u8	Channel;
-
-	u16	ListenInterval;
-	u16	CapabilityInformation;
-
-	u16	BeaconPeriod;
-	u16	ProbeDelay;
-
-	u8	bss_type;/* 0: IBSS_NET or 1:ESS_NET */
-	u8	preamble;/* 0: short preamble, 1: long preamble */
-	u8	slot_time_select; /* 9 or 20 value */
-	u8	phy_type; /* Phy select */
-
-	u32	phy_para[MAX_RF_PARAMETER];
-	u32	phy_number;
-
-	u32	CurrentRadioSw; /* 0:On 1:Off */
-	u32	CurrentRadioHw; /* 0:On 1:Off */
-
-	u8	*power_save_point; /* Used by hal_get_power_save_mode for return value */
-	u8	cwmin;
-	u8	desired_power_save;
-	u8	dtim; /* Is running dtim */
-	u8	mapping_key_replace_index; /* In Key table, the next index be replaced */
-
-	u16	MaxReceiveLifeTime;
-	u16	FragmentThreshold;
-	u16	FragmentThreshold_tmp;
-	u16	cwmax;
-
-	u8	Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
-	u32	Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
-	u8	CurrentDefaultKeyIndex;
-	u32	CurrentDefaultKeyLength;
-
-	/*
-	 * ==================================================
-	 * Variable for each module
-	 * ==================================================
-	 */
-	struct usb_device	*udev;
-	struct wb35_reg		reg;	/* Need Wb35Reg.h */
-	struct wb35_tx		Wb35Tx; /* Need Wb35Tx.h */
-	struct wb35_rx		Wb35Rx; /* Need Wb35Rx.h */
-
-	struct timer_list	LEDTimer; /* For LED */
-
-	u32			LEDpoint; /* For LED */
-
-	u32			dto_tx_retry_count;
-	u32			dto_tx_frag_count;
-	u32			rx_ok_count[13]; /* index=0: total rx ok */
-	u32			rx_err_count[13]; /* index=0: total rx err */
-
-	/* for Tx debug */
-	u32			tx_TBTT_start_count;
-	u32			tx_ETR_count;
-	u32			tx_WepOn_false_count;
-	u32			tx_Null_key_count;
-	u32			tx_retry_count[8];
-
-	u8			PowerIndexFromEEPROM; /* For 2412MHz */
-	u8			power_index;
-	u8			IsWaitJoinComplete; /* TRUE: set join request */
-	u8			band;
-
-	u16			SoftwareSet;
-	u16			Reserved_s;
-
-	u32			IsInitOK; /* 0: Driver starting 1: Driver init OK */
-
-	/* For Phy calibration */
-	s32			iq_rsdl_gain_tx_d2;
-	s32			iq_rsdl_phase_tx_d2;
-	u32			txvga_setting_for_cal;
-
-	u8			TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
-	u8			TxVgaFor24[16]; /* Max is 14, 2 for alignment */
-	struct txvga_for_50		TxVgaFor50[36];	/* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
-
-	u16			Scan_Interval;
-	u16			RESERVED6;
-
-	/* LED control */
-	u32		LED_control;
-	/*
-	 * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
-	 * Gray_Led
-	 *		For Led gray setting
-	 * Led
-	 *		0: normal control,
-	 *			LED behavior will decide by EEPROM setting
-	 *		1: Turn off specific LED
-	 *		2: Always on specific LED
-	 *		3: slow blinking specific LED
-	 *		4: fast blinking specific LED
-	 *		5: WPS led control is set. Led0 is Red, Led1 id Green
-	 *
-	 * Led[1] is parameter for WPS LED mode
-	 *		1:InProgress
-	 *		2: Error
-	 *		3: Session overlap
-	 *		4: Success control
-	 */
-	u32		LED_LinkOn;	/* Turn LED on control */
-	u32		LED_Scanning;	/* Let LED in scan process control */
-	u32		LED_Blinking;	/* Temp variable for shining */
-	u32		RxByteCountLast;
-	u32		TxByteCountLast;
-
-	/* For global timer */
-	u32		time_count;	/* TICK_TIME_100ms 1 = 100ms */
-};
-
-#endif
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
deleted file mode 100644
index 0d29624416c3..000000000000
--- a/drivers/staging/winbond/wbusb.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Copyright 2008 Pavel Machek <pavel@ucw.cz>
- *
- * Distribute under GPLv2.
- *
- * The original driver was written by:
- *     Jeff Lee <YY_Lee@issc.com.tw>
- *
- * and was adapted to the 2.6 kernel by:
- *     Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>
- */
-#include <net/mac80211.h>
-#include <linux/usb.h>
-#include <linux/module.h>
-
-#include "core.h"
-#include "mds_f.h"
-#include "mto.h"
-#include "wbhal.h"
-#include "wb35reg_f.h"
-#include "wb35tx_f.h"
-#include "wb35rx_f.h"
-
-MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.1");
-
-static const struct usb_device_id wb35_table[] = {
-	{ USB_DEVICE(0x0416, 0x0035) },
-	{ USB_DEVICE(0x18E8, 0x6201) },
-	{ USB_DEVICE(0x18E8, 0x6206) },
-	{ USB_DEVICE(0x18E8, 0x6217) },
-	{ USB_DEVICE(0x18E8, 0x6230) },
-	{ USB_DEVICE(0x18E8, 0x6233) },
-	{ USB_DEVICE(0x1131, 0x2035) },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(usb, wb35_table);
-
-static struct ieee80211_rate wbsoft_rates[] = {
-	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-};
-
-static struct ieee80211_channel wbsoft_channels[] = {
-	{ .center_freq = 2412 },
-};
-
-static struct ieee80211_supported_band wbsoft_band_2GHz = {
-	.channels	= wbsoft_channels,
-	.n_channels	= ARRAY_SIZE(wbsoft_channels),
-	.bitrates	= wbsoft_rates,
-	.n_bitrates	= ARRAY_SIZE(wbsoft_rates),
-};
-
-static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
-{
-	u32 tmp;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	pHwData->BeaconPeriod = beacon_period;
-	tmp = pHwData->BeaconPeriod << 16;
-	tmp |= pHwData->ProbeDelay;
-	Wb35Reg_Write(pHwData, 0x0848, tmp);
-}
-
-static int wbsoft_add_interface(struct ieee80211_hw *dev,
-				struct ieee80211_vif *vif)
-{
-	struct wbsoft_priv *priv = dev->priv;
-
-	hal_set_beacon_period(&priv->sHwData, vif->bss_conf.beacon_int);
-
-	return 0;
-}
-
-static void wbsoft_remove_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif)
-{
-}
-
-static void wbsoft_stop(struct ieee80211_hw *hw)
-{
-}
-
-static int wbsoft_get_stats(struct ieee80211_hw *hw,
-			    struct ieee80211_low_level_stats *stats)
-{
-	return 0;
-}
-
-static u64 wbsoft_prepare_multicast(struct ieee80211_hw *hw,
-				    struct netdev_hw_addr_list *mc_list)
-{
-	return netdev_hw_addr_list_count(mc_list);
-}
-
-static void wbsoft_configure_filter(struct ieee80211_hw *dev,
-				    unsigned int changed_flags,
-				    unsigned int *total_flags,
-				    u64 multicast)
-{
-	unsigned int new_flags;
-
-	new_flags = 0;
-
-	if (*total_flags & FIF_PROMISC_IN_BSS)
-		new_flags |= FIF_PROMISC_IN_BSS;
-	else if ((*total_flags & FIF_ALLMULTI) || (multicast > 32))
-		new_flags |= FIF_ALLMULTI;
-
-	dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
-
-	*total_flags = new_flags;
-}
-
-static void wbsoft_tx(struct ieee80211_hw *dev,
-		      struct ieee80211_tx_control *control,
-		      struct sk_buff *skb)
-{
-	struct wbsoft_priv *priv = dev->priv;
-
-	if (priv->sMlmeFrame.is_in_used != PACKET_FREE_TO_USE) {
-		priv->sMlmeFrame.wNumTxMMPDUDiscarded++;
-		kfree_skb(skb);
-		return;
-	}
-
-	priv->sMlmeFrame.is_in_used = PACKET_COME_FROM_MLME;
-
-	priv->sMlmeFrame.pMMPDU		= skb->data;
-	priv->sMlmeFrame.data_type	= FRAME_TYPE_802_11_MANAGEMENT;
-	priv->sMlmeFrame.len		= skb->len;
-	priv->sMlmeFrame.wNumTxMMPDU++;
-
-	/*
-	 * H/W will enter power save by set the register. S/W don't send null
-	 * frame with PWRMgt bit enbled to enter power save now.
-	 */
-
-	Mds_Tx(priv);
-}
-
-static int wbsoft_start(struct ieee80211_hw *dev)
-{
-	struct wbsoft_priv *priv = dev->priv;
-
-	priv->enabled = true;
-
-	return 0;
-}
-
-static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	if (radio_off) {	/* disable Baseband receive off */
-		pHwData->CurrentRadioSw = 1;	/* off */
-		reg->M24_MacControl &= 0xffffffbf;
-	} else {
-		pHwData->CurrentRadioSw = 0;	/* on */
-		reg->M24_MacControl |= 0x00000040;
-	}
-	Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
-}
-
-static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
-	pHwData->Channel = channel.ChanNo;
-	pHwData->band = channel.band;
-	reg->M28_MacControl &= ~0xff;	/* Clean channel information field */
-	reg->M28_MacControl |= channel.ChanNo;
-	Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
-				       (s8 *) &channel,
-				       sizeof(struct chan_info));
-}
-
-static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel)
-{
-	hal_set_current_channel_ex(pHwData, channel);
-}
-
-static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	reg->M00_MacControl &= ~0x02000000;	/* The HW value */
-
-	if (enable)
-		reg->M00_MacControl |= 0x02000000;	/* The HW value */
-
-	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
-}
-
-/* For wep key error detection, we need to accept broadcast packets to be received temporary. */
-static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	if (enable) {
-		reg->M00_MacControl |= 0x00400000;
-		Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
-	} else {
-		reg->M00_MacControl &= ~0x00400000;
-		Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
-	}
-}
-
-static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	reg->M00_MacControl &= ~0x01000000;	/* The HW value */
-	if (enable)
-		reg->M00_MacControl |= 0x01000000;	/* The HW value */
-	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
-}
-
-static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	if (!enable)	/* Due to SME and MLME are not suitable for 35 */
-		return;
-
-	reg->M00_MacControl &= ~0x04000000;	/* The HW value */
-	if (enable)
-		reg->M00_MacControl |= 0x04000000;	/* The HW value */
-
-	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
-}
-
-static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct wbsoft_priv *priv = dev->priv;
-	struct chan_info ch;
-
-	/* Should use channel_num, or something, as that is already pre-translated */
-	ch.band = 1;
-	ch.ChanNo = 1;
-
-	hal_set_current_channel(&priv->sHwData, ch);
-	hal_set_accept_broadcast(&priv->sHwData, 1);
-	hal_set_accept_promiscuous(&priv->sHwData, 1);
-	hal_set_accept_multicast(&priv->sHwData, 1);
-	hal_set_accept_beacon(&priv->sHwData, 1);
-	hal_set_radio_mode(&priv->sHwData, 0);
-
-	return 0;
-}
-
-static u64 wbsoft_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
-{
-	return 0;
-}
-
-static const struct ieee80211_ops wbsoft_ops = {
-	.tx			= wbsoft_tx,
-	.start			= wbsoft_start,
-	.stop			= wbsoft_stop,
-	.add_interface		= wbsoft_add_interface,
-	.remove_interface	= wbsoft_remove_interface,
-	.config			= wbsoft_config,
-	.prepare_multicast	= wbsoft_prepare_multicast,
-	.configure_filter	= wbsoft_configure_filter,
-	.get_stats		= wbsoft_get_stats,
-	.get_tsf		= wbsoft_get_tsf,
-};
-
-static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address)
-{
-	u32 ltmp[2];
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN);
-
-	ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress);
-	ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
-
-	Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
-}
-
-static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address)
-{
-	if (pHwData->SurpriseRemove)
-		return;
-
-	memcpy(pethernet_address, pHwData->PermanentMacAddress, 6);
-}
-
-static void hal_stop(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	pHwData->Wb35Rx.rx_halt = 1;
-	Wb35Rx_stop(pHwData);
-
-	pHwData->Wb35Tx.tx_halt = 1;
-	Wb35Tx_stop(pHwData);
-
-	reg->D00_DmaControl &= ~0xc0000000;	/* Tx Off, Rx Off */
-	Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl);
-}
-
-static unsigned char hal_idle(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (!pHwData->SurpriseRemove && reg->EP0vm_state != VM_STOP)
-		return false;
-
-	return true;
-}
-
-u8 hal_get_antenna_number(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if ((reg->BB2C & BIT(11)) == 0)
-		return 0;
-	else
-		return 1;
-}
-
-/* 0 : radio on; 1: radio off */
-static u8 hal_get_hw_radio_off(struct hw_data *pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove)
-		return 1;
-
-	/* read the bit16 of register U1B0 */
-	Wb35Reg_Read(pHwData, 0x3b0, &reg->U1B0);
-	if ((reg->U1B0 & 0x00010000)) {
-		pHwData->CurrentRadioHw = 1;
-		return 1;
-	} else {
-		pHwData->CurrentRadioHw = 0;
-		return 0;
-	}
-}
-
-static u8 LED_GRAY[20] = {
-	0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2
-};
-
-static u8 LED_GRAY2[30] = {
-	7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 15, 14, 13, 12, 11, 10, 9, 8
-};
-
-static void hal_led_control(unsigned long data)
-{
-	struct wbsoft_priv *adapter = (struct wbsoft_priv *)data;
-	struct hw_data *pHwData = &adapter->sHwData;
-	struct wb35_reg *reg = &pHwData->reg;
-	u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
-	u32 TimeInterval = 500, ltmp, ltmp2;
-	ltmp = 0;
-
-	if (pHwData->SurpriseRemove)
-		return;
-
-	if (pHwData->LED_control) {
-		ltmp2 = pHwData->LED_control & 0xff;
-		if (ltmp2 == 5)	{ /* 5 is WPS mode */
-			TimeInterval = 100;
-			ltmp2 = (pHwData->LED_control >> 8) & 0xff;
-			switch (ltmp2) {
-			case 1:	/* [0.2 On][0.1 Off]... */
-				pHwData->LED_Blinking %= 3;
-				ltmp = 0x1010;	/* Led 1 & 0 Green and Red */
-				if (pHwData->LED_Blinking == 2)	/* Turn off */
-					ltmp = 0;
-				break;
-			case 2:	/* [0.1 On][0.1 Off]... */
-				pHwData->LED_Blinking %= 2;
-				ltmp = 0x0010;	/* Led 0 red color */
-				if (pHwData->LED_Blinking) /* Turn off */
-					ltmp = 0;
-				break;
-			case 3:	/* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */
-				pHwData->LED_Blinking %= 15;
-				ltmp = 0x0010;	/* Led 0 red color */
-				if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */
-					ltmp = 0;
-				break;
-			case 4:	/* [300 On][ off ] */
-				ltmp = 0x1000;	/* Led 1 Green color */
-				if (pHwData->LED_Blinking >= 3000)
-					ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */
-				break;
-			}
-			pHwData->LED_Blinking++;
-
-			reg->U1BC_LEDConfigure = ltmp;
-			if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */
-				reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */
-				reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
-			}
-			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
-		}
-	} else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */
-		if (reg->U1BC_LEDConfigure & 0x1010) {
-			reg->U1BC_LEDConfigure &= ~0x1010;
-			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
-		}
-	} else {
-		switch (LEDSet) {
-		case 4:	/* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
-			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
-				/* Blinking if scanning is on progress */
-				if (pHwData->LED_Scanning) {
-					if (pHwData->LED_Blinking == 0) {
-						reg->U1BC_LEDConfigure |= 0x10;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 On */
-						pHwData->LED_Blinking = 1;
-						TimeInterval = 300;
-					} else {
-						reg->U1BC_LEDConfigure &= ~0x10;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-						pHwData->LED_Blinking = 0;
-						TimeInterval = 300;
-					}
-				} else {
-					/* Turn Off LED_0 */
-					if (reg->U1BC_LEDConfigure & 0x10) {
-						reg->U1BC_LEDConfigure &= ~0x10;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-					}
-				}
-			} else {
-				/* Turn On LED_0 */
-				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
-					reg->U1BC_LEDConfigure |= 0x10;
-					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-				}
-			}
-			break;
-		case 6:	/* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
-			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
-				/* Blinking if scanning is on progress */
-				if (pHwData->LED_Scanning) {
-					if (pHwData->LED_Blinking == 0) {
-						reg->U1BC_LEDConfigure &= ~0xf;
-						reg->U1BC_LEDConfigure |= 0x10;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 On */
-						pHwData->LED_Blinking = 1;
-						TimeInterval = 300;
-					} else {
-						reg->U1BC_LEDConfigure &= ~0x1f;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-						pHwData->LED_Blinking = 0;
-						TimeInterval = 300;
-					}
-				} else {
-					/* Gray blinking if in disconnect state and not scanning */
-					ltmp = reg->U1BC_LEDConfigure;
-					reg->U1BC_LEDConfigure &= ~0x1f;
-					if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
-						reg->U1BC_LEDConfigure |= 0x10;
-						reg->U1BC_LEDConfigure |=
-						    LED_GRAY2[(pHwData->LED_Blinking % 30)];
-					}
-					pHwData->LED_Blinking++;
-					if (reg->U1BC_LEDConfigure != ltmp)
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-					TimeInterval = 100;
-				}
-			} else {
-				/* Turn On LED_0 */
-				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
-					reg->U1BC_LEDConfigure |= 0x10;
-					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_0 Off */
-				}
-			}
-			break;
-		case 5:	/* [101] Only 1 Led be placed on PCB and use LED_1 for showing */
-			if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
-				/* Blinking if scanning is on progress */
-				if (pHwData->LED_Scanning) {
-					if (pHwData->LED_Blinking == 0) {
-						reg->U1BC_LEDConfigure |= 0x1000;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
-						pHwData->LED_Blinking = 1;
-						TimeInterval = 300;
-					} else {
-						reg->U1BC_LEDConfigure &= ~0x1000;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 Off */
-						pHwData->LED_Blinking = 0;
-						TimeInterval = 300;
-					}
-				} else {
-					/* Turn Off LED_1 */
-					if (reg->U1BC_LEDConfigure & 0x1000) {
-						reg->U1BC_LEDConfigure &= ~0x1000;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 Off */
-					}
-				}
-			} else {
-				/* Is transmitting/receiving ?? */
-				if ((adapter->RxByteCount !=
-				     pHwData->RxByteCountLast)
-				    || (adapter->TxByteCount !=
-					pHwData->TxByteCountLast)) {
-					if ((reg->U1BC_LEDConfigure & 0x3000) !=
-					    0x3000) {
-						reg->U1BC_LEDConfigure |= 0x3000;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
-					}
-					/* Update variable */
-					pHwData->RxByteCountLast =
-					    adapter->RxByteCount;
-					pHwData->TxByteCountLast =
-					    adapter->TxByteCount;
-					TimeInterval = 200;
-				} else {
-					/* Turn On LED_1 and blinking if transmitting/receiving */
-					if ((reg->U1BC_LEDConfigure & 0x3000) !=
-					    0x1000) {
-						reg->U1BC_LEDConfigure &=
-						    ~0x3000;
-						reg->U1BC_LEDConfigure |=
-						    0x1000;
-						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	/* LED_1 On */
-					}
-				}
-			}
-			break;
-		default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */
-			if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
-				reg->U1BC_LEDConfigure |= 0x3000;	/* LED_1 is always on and event enable */
-				Wb35Reg_Write(pHwData, 0x03bc,
-					      reg->U1BC_LEDConfigure);
-			}
-
-			if (pHwData->LED_Blinking) {
-				/* Gray blinking */
-				reg->U1BC_LEDConfigure &= ~0x0f;
-				reg->U1BC_LEDConfigure |= 0x10;
-				reg->U1BC_LEDConfigure |=
-				    LED_GRAY[(pHwData->LED_Blinking - 1) % 20];
-				Wb35Reg_Write(pHwData, 0x03bc,
-					      reg->U1BC_LEDConfigure);
-
-				pHwData->LED_Blinking += 2;
-				if (pHwData->LED_Blinking < 40)
-					TimeInterval = 100;
-				else {
-					pHwData->LED_Blinking = 0; /* Stop blinking */
-					reg->U1BC_LEDConfigure &= ~0x0f;
-					Wb35Reg_Write(pHwData, 0x03bc,
-						      reg->U1BC_LEDConfigure);
-				}
-				break;
-			}
-
-			if (pHwData->LED_LinkOn) {
-				if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */
-					/* Try to turn ON LED_0 after gray blinking */
-					reg->U1BC_LEDConfigure |= 0x10;
-					pHwData->LED_Blinking = 1; /* Start blinking */
-					TimeInterval = 50;
-				}
-			} else {
-				if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */
-					reg->U1BC_LEDConfigure &= ~0x10;
-					Wb35Reg_Write(pHwData, 0x03bc,
-						      reg->U1BC_LEDConfigure);
-				}
-			}
-			break;
-		}
-	}
-
-	pHwData->time_count += TimeInterval;
-	Wb35Tx_CurrentTime(adapter, pHwData->time_count);
-	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
-	add_timer(&pHwData->LEDTimer);
-}
-
-static int hal_init_hardware(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv *priv = hw->priv;
-	struct hw_data *pHwData = &priv->sHwData;
-	u16 SoftwareSet;
-
-	pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME;
-	pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-
-	if (!Wb35Reg_initial(pHwData))
-		goto error_reg_destroy;
-
-	if (!Wb35Tx_initial(pHwData))
-		goto error_tx_destroy;
-
-	if (!Wb35Rx_initial(pHwData))
-		goto error_rx_destroy;
-
-	init_timer(&pHwData->LEDTimer);
-	pHwData->LEDTimer.function = hal_led_control;
-	pHwData->LEDTimer.data = (unsigned long)priv;
-	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
-	add_timer(&pHwData->LEDTimer);
-
-	SoftwareSet = hal_software_set(pHwData);
-
-	Wb35Rx_start(hw);
-	Wb35Tx_EP2VM_start(priv);
-
-	return 0;
-
-error_rx_destroy:
-	Wb35Rx_destroy(pHwData);
-error_tx_destroy:
-	Wb35Tx_destroy(pHwData);
-error_reg_destroy:
-	Wb35Reg_destroy(pHwData);
-
-	pHwData->SurpriseRemove = 1;
-	return -EINVAL;
-}
-
-static int wb35_hw_init(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv *priv = hw->priv;
-	struct hw_data *pHwData = &priv->sHwData;
-	u8 EEPROM_region;
-	u8 HwRadioOff;
-	u8 *pMacAddr2;
-	u8 *pMacAddr;
-	int err;
-
-	pHwData->phy_type = RF_DECIDE_BY_INF;
-
-	priv->Mds.TxRTSThreshold		= DEFAULT_RTSThreshold;
-	priv->Mds.TxFragmentThreshold		= DEFAULT_FRAGMENT_THRESHOLD;
-
-	priv->sLocalPara.region_INF		= REGION_AUTO;
-	priv->sLocalPara.TxRateMode		= RATE_AUTO;
-	priv->sLocalPara.bMacOperationMode	= MODE_802_11_BG;
-	priv->sLocalPara.MTUsize		= MAX_ETHERNET_PACKET_SIZE;
-	priv->sLocalPara.bPreambleMode		= AUTO_MODE;
-	priv->sLocalPara.bWepKeyError		= false;
-	priv->sLocalPara.bToSelfPacketReceived	= false;
-	priv->sLocalPara.WepKeyDetectTimerCount	= 2 * 100; /* 2 seconds */
-
-	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
-
-	err = hal_init_hardware(hw);
-	if (err)
-		goto error;
-
-	EEPROM_region = hal_get_region_from_EEPROM(pHwData);
-	if (EEPROM_region != REGION_AUTO)
-		priv->sLocalPara.region = EEPROM_region;
-	else {
-		if (priv->sLocalPara.region_INF != REGION_AUTO)
-			priv->sLocalPara.region = priv->sLocalPara.region_INF;
-		else
-			priv->sLocalPara.region = REGION_USA;	/* default setting */
-	}
-
-	Mds_initial(priv);
-
-	/*
-	 * If no user-defined address in the registry, use the address
-	 * "burned" on the NIC instead.
-	 */
-	pMacAddr = priv->sLocalPara.ThisMacAddress;
-	pMacAddr2 = priv->sLocalPara.PermanentAddress;
-
-	/* Reading ethernet address from EEPROM */
-	hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress);
-	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
-		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
-	else {
-		/* Set the user define MAC address */
-		hal_set_ethernet_address(pHwData,
-					 priv->sLocalPara.ThisMacAddress);
-	}
-
-	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
-	hal_get_hw_radio_off(pHwData);
-
-	/* Waiting for HAL setting OK */
-	while (!hal_idle(pHwData))
-		msleep(10);
-
-	MTO_Init(priv);
-
-	HwRadioOff = hal_get_hw_radio_off(pHwData);
-	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
-
-	hal_set_radio_mode(pHwData,
-			   (unsigned char)(priv->sLocalPara.RadioOffStatus.
-					   boSwRadioOff
-					   || priv->sLocalPara.RadioOffStatus.
-					   boHwRadioOff));
-
-	/* Notify hal that the driver is ready now. */
-	hal_driver_init_OK(pHwData) = 1;
-
-error:
-	return err;
-}
-
-static int wb35_probe(struct usb_interface *intf,
-		      const struct usb_device_id *id_table)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_host_interface *interface;
-	struct ieee80211_hw *dev;
-	struct wbsoft_priv *priv;
-	int err;
-	u32 ltmp;
-
-	usb_get_dev(udev);
-
-	/* Check the device if it already be opened */
-	err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			     0x01,
-			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			     0x0, 0x400, &ltmp, 4, HZ * 100);
-	if (err < 0)
-		goto error;
-
-	/* Is already initialized? */
-	ltmp = cpu_to_le32(ltmp);
-	if (ltmp) {
-		err = -EBUSY;
-		goto error;
-	}
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
-	if (!dev) {
-		err = -ENOMEM;
-		goto error;
-	}
-
-	priv = dev->priv;
-
-	priv->sHwData.udev = udev;
-
-	interface = intf->cur_altsetting;
-	endpoint = &interface->endpoint[0].desc;
-
-	err = wb35_hw_init(dev);
-	if (err)
-		goto error_free_hw;
-
-	SET_IEEE80211_DEV(dev, &udev->dev);
-	{
-		struct hw_data *pHwData = &priv->sHwData;
-		unsigned char dev_addr[MAX_ADDR_LEN];
-		hal_get_permanent_address(pHwData, dev_addr);
-		SET_IEEE80211_PERM_ADDR(dev, dev_addr);
-	}
-
-	dev->extra_tx_headroom = 12;	/* FIXME */
-	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
-
-	dev->max_signal = 100;
-	dev->queues = 1;
-
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
-
-	err = ieee80211_register_hw(dev);
-	if (err)
-		goto error_free_hw;
-
-	usb_set_intfdata(intf, dev);
-
-	return 0;
-
-error_free_hw:
-	ieee80211_free_hw(dev);
-error:
-	usb_put_dev(udev);
-	return err;
-}
-
-static void hal_halt(struct hw_data *pHwData)
-{
-	del_timer_sync(&pHwData->LEDTimer);
-	/* XXX: Wait for Timer DPC exit. */
-	msleep(100);
-	Wb35Rx_destroy(pHwData);
-	Wb35Tx_destroy(pHwData);
-	Wb35Reg_destroy(pHwData);
-}
-
-static void wb35_hw_halt(struct wbsoft_priv *adapter)
-{
-	/* Turn off Rx and Tx hardware ability */
-	hal_stop(&adapter->sHwData);
-	/* Waiting Irp completed */
-	msleep(100);
-
-	hal_halt(&adapter->sHwData);
-}
-
-static void wb35_disconnect(struct usb_interface *intf)
-{
-	struct ieee80211_hw *hw = usb_get_intfdata(intf);
-	struct wbsoft_priv *priv = hw->priv;
-
-	wb35_hw_halt(priv);
-
-	ieee80211_stop_queues(hw);
-	ieee80211_unregister_hw(hw);
-	ieee80211_free_hw(hw);
-
-	usb_set_intfdata(intf, NULL);
-	usb_put_dev(interface_to_usbdev(intf));
-}
-
-static struct usb_driver wb35_driver = {
-	.name		= "w35und",
-	.id_table	= wb35_table,
-	.probe		= wb35_probe,
-	.disconnect	= wb35_disconnect,
-};
-
-module_usb_driver(wb35_driver);