diff options
| author |   Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2010-11-01 15:38:34 -0400 |
|---|---|---|
| committer |   Jiri Kosina <jkosina@suse.cz> | 2010-11-01 15:38:34 -0400 |
| commit | b595076a180a56d1bb170e6eceda6eb9d76f4cd3 (patch) | |
| tree | bc01ec7283808013e0b8ce7713fd6fc40f810429 | |
| parent | Kconfig: typo: and -> an (diff) | |
| download | linux-dev-b595076a180a56d1bb170e6eceda6eb9d76f4cd3.tar.xz linux-dev-b595076a180a56d1bb170e6eceda6eb9d76f4cd3.zip | |
tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
207 files changed, 261 insertions, 261 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 020ac80d4682..620eb3f6a90a 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -250,7 +250,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd) <title>Device ready function</title> <para> If the hardware interface has the ready busy pin of the NAND chip connected to a - GPIO or other accesible I/O pin, this function is used to read back the state of the + GPIO or other accessible I/O pin, this function is used to read back the state of the pin. The function has no arguments and should return 0, if the device is busy (R/B pin is low) and 1, if the device is ready (R/B pin is high). If the hardware interface does not give access to the ready busy pin, then diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c index 8c2bfc4a6358..3e082f96dc12 100644 --- a/Documentation/cgroups/cgroup_event_listener.c +++ b/Documentation/cgroups/cgroup_event_listener.c @@ -91,7 +91,7 @@ int main(int argc, char **argv) if (ret == -1) { perror("cgroup.event_control " - "is not accessable any more"); + "is not accessible any more"); break; } diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index b7eececfb195..fc8fa97a09ac 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -398,7 +398,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. written to move_charge_at_immigrate. 9.10 Memory thresholds - Memory controler implements memory thresholds using cgroups notification + Memory controller implements memory thresholds using cgroups notification API. You can use Documentation/cgroups/cgroup_event_listener.c to test it. diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 741fe66d6eca..0cfb00fd86ff 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -598,7 +598,7 @@ a 5-byte jump instruction. So there are several limitations. a) The instructions in DCR must be relocatable. b) The instructions in DCR must not include a call instruction. c) JTPR must not be targeted by any jump or call instruction. -d) DCR must not straddle the border betweeen functions. +d) DCR must not straddle the border between functions. Anyway, these limitations are checked by the in-kernel instruction decoder, so you don't need to worry about that. diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt index b336266bea5e..50713e37c695 100644 --- a/Documentation/kvm/api.txt +++ b/Documentation/kvm/api.txt @@ -874,7 +874,7 @@ Possible values are: - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and is waiting for an interrupt - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector - accesible via KVM_GET_VCPU_EVENTS) + accessible via KVM_GET_VCPU_EVENTS) This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace. diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt index 61d7c9247453..0cb8cb9098f4 100644 --- a/Documentation/networking/caif/spi_porting.txt +++ b/Documentation/networking/caif/spi_porting.txt @@ -32,7 +32,7 @@ the physical hardware, both with regard to SPI and to GPIOs. This function is called by the CAIF SPI interface to give you a chance to set up your hardware to be ready to receive a stream of data from the master. The xfer structure contains - both physical and logical adresses, as well as the total length + both physical and logical addresses, as well as the total length of the transfer in both directions.The dev parameter can be used to map to different CAIF SPI slave devices. diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 302db5da49b3..1c6660d2d7f5 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1098,7 +1098,7 @@ supported currently at the toplevel. * an arbitrary array of bytes */ - childnode@addresss { /* define a child node named "childnode" + childnode@address { /* define a child node named "childnode" * whose unit name is "childnode at * address" */ diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index 337c924cc81f..5e83769c6aa9 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -573,7 +573,7 @@ Changes from 20041018 to 20041123 * Backround nodev_timeout processing to DPC This enables us to unblock (stop dev_loss_tmo) when appopriate. * Fix array discovery with multiple luns. The max_luns was 0 at - the time the host structure was intialized. lpfc_cfg_params + the time the host structure was initialized. lpfc_cfg_params then set the max_luns to the correct value afterwards. * Remove unused define LPFC_MAX_LUN and set the default value of lpfc_max_lun parameter to 512. diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt index 9bd00fc2e823..8abd40b22b7f 100644 --- a/Documentation/timers/timer_stats.txt +++ b/Documentation/timers/timer_stats.txt @@ -19,7 +19,7 @@ Linux system over a sample period: - the pid of the task(process) which initialized the timer - the name of the process which initialized the timer -- the function where the timer was intialized +- the function where the timer was initialized - the callback function which is associated to the timer - the number of events (callbacks) diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 1bec96e85196..60dc077ea7cc 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -236,7 +236,7 @@ static struct resource it8152_mem = { /* * The following functions are needed for DMA bouncing. - * ITE8152 chip can addrees up to 64MByte, so all the devices + * ITE8152 chip can address up to 64MByte, so all the devices * connected to ITE8152 (PCI and USB) should have limited DMA window */ diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ba65f6eedca6..cb660bc54d7a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -70,7 +70,7 @@ static inline struct vic_device *to_vic(struct sys_device *sys) * vic_init2 - common initialisation code * @base: Base of the VIC. * - * Common initialisation code for registeration + * Common initialisation code for registration * and resume. */ static void vic_init2(void __iomem *base) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 7b58c948a957..de2fd04e7c8a 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { .platform_data = &my_flash0_platform, #endif }, - { /* User accessable spi - cs1 (250KHz) */ + { /* User accessible spi - cs1 (250KHz) */ .modalias = "spi-cs1", .chip_select = 1, .max_speed_hz = 250 * 1000, }, - { /* User accessable spi - cs2 (1MHz) */ + { /* User accessible spi - cs2 (1MHz) */ .modalias = "spi-cs2", .chip_select = 2, .max_speed_hz = 1 * 1000 * 1000, }, - { /* User accessable spi - cs3 (10MHz) */ + { /* User accessible spi - cs3 (10MHz) */ .modalias = "spi-cs3", .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c index b3a61d860c65..96273ff34956 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c @@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom) t = t << 1; } - /* Intialize the result */ + /* Initialize the result */ r = 0; do { diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c index 7b9bac2d79a5..6b9be2e98e51 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c @@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration */ /****************************************************************************/ uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */ + dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ ) { dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index ff7b436d0935..77f84b40dda9 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -316,7 +316,7 @@ static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */ /** * @brief Check if DMA channel is the flow controller * -* @return 1 : If DMA is a flow controler +* @return 1 : If DMA is a flow controller * 0 : Peripheral is the flow controller * * @note diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c index 5c1c9a0e5ed2..16225e43f3c3 100644 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c @@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom) t = t << 1; } - /* Intialize the result */ + /* Initialize the result */ r = 0; do { diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 77eb35c89cd0..8d1baf3f4683 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle) /****************************************************************************/ /** -* Intializes all of the data structures associated with the DMA. +* Initializes all of the data structures associated with the DMA. * @return * >= 0 - Initialization was successfull. * diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 5d510130a25f..6c8da2b9fc1f 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ /****************************************************************************/ uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */ + dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ ); #endif /* _DMACHW_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index cbf334d1c761..d67e2f8c22de 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -28,7 +28,7 @@ /* Data type for DMA Link List Item */ typedef struct { - uint32_t sar; /* Source Adress Register. + uint32_t sar; /* Source Address Register. Address must be aligned to CTLx.SRC_TR_WIDTH. */ uint32_t dar; /* Destination Address Register. Address must be aligned to CTLx.DST_TR_WIDTH. */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h index 891cea87e333..f1ecf96f2da5 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h @@ -35,7 +35,7 @@ typedef struct { /* Data type representing DMA channel registers */ typedef struct { - dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved) + dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved) Address must be aligned to CTLx.SRC_TR_WIDTH. */ dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved) diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index 213a4fcfeb1c..8c950e1d06be 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -33,7 +33,7 @@ #define GEMINI_LPC_HOST_BASE 0x47000000 #define GEMINI_LPC_IO_BASE 0x47800000 #define GEMINI_INTERRUPT_BASE 0x48000000 -/* TODO: Different interrupt controlers when SMP +/* TODO: Different interrupt controllers when SMP * #define GEMINI_INTERRUPT0_BASE 0x48000000 * #define GEMINI_INTERRUPT1_BASE 0x49000000 */ diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index d36b61074146..7f8d15d56834 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -153,7 +153,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) { if (mtype == MT_DEVICE) { /* The peripherals in the 88000000 - D0000000 range - * are only accessable by type MT_DEVICE_NONSHARED. + * are only accessible by type MT_DEVICE_NONSHARED. * Adjust mtype as necessary to make this "just work." */ if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 0d50b45d041c..1e6fe6d11aee 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * FIXME: we currently manage device-specific idle states * for PER and CORE in combination with CPU-specific * idle states. This is wrong, and device-specific - * idle managment needs to be separated out into + * idle management needs to be separated out into * its own code. */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7e..db79ac68ed97 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port) } /** - * omap_serial_init() - intialize all supported serial ports + * omap_serial_init() - initialize all supported serial ports * * Initializes all available UARTs as serial ports. Platforms * can call this function when they want to have default behaviour diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 462167ac05f9..cdf7f41e2bb3 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void) } #endif -/* USB Open Host Controler Interface */ +/* USB Open Host Controller Interface */ static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .flags = ENABLE_PORT_ALL diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index e7d03ab41d80..372ea6855454 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) /* Set all DMA configuration to be DMA, not SDMA */ writel(0xffffff, S3C_SYSREG(0x110)); - /* Register standard DMA controlers */ + /* Register standard DMA controllers */ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000); diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 3560f8c1e723..5aa2d54ebfaa 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = { }; /* Add spear300 specific devices here */ -/* arm gpio1 device registeration */ +/* arm gpio1 device registration */ static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, .irq_base = SPEAR_GPIO1_INT_BASE, @@ -451,7 +451,7 @@ void __init spear300_init(void) /* call spear3xx family common init function */ spear3xx_init(); - /* shared irq registeration */ + /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE); if (shirq_ras1.regs.base) { diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 96a1ab824bac..53b41b52d7ee 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -266,7 +266,7 @@ void __init spear310_init(void) /* call spear3xx family common init function */ spear3xx_init(); - /* shared irq registeration */ + /* shared irq registration */ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE); if (base) { /* shirq 1 */ diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 6a1219549369..88b465284c36 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -519,7 +519,7 @@ void __init spear320_init(void) /* call spear3xx family common init function */ spear3xx_init(); - /* shared irq registeration */ + /* shared irq registration */ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE); if (base) { /* shirq 1 */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index e87313aeae20..52f553c8c46d 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -22,7 +22,7 @@ #include <mach/spear.h> /* Add spear3xx machines common devices here */ -/* gpio device registeration */ +/* gpio device registration */ static struct pl061_platform_data gpio_plat_data = { .gpio_base = 0, .irq_base = SPEAR_GPIO_INT_BASE, @@ -41,7 +41,7 @@ struct amba_device gpio_device = { .irq = {IRQ_BASIC_GPIO, NO_IRQ}, }; -/* uart device registeration */ +/* uart device registration */ struct amba_device uart_device = { .dev = { .init_name = "uart", @@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) pmx_fail: if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + printk(KERN_ERR "padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index baf6bcc3169c..f2fe14e8471d 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -23,7 +23,7 @@ #include <mach/spear.h> /* Add spear6xx machines common devices here */ -/* uart device registeration */ +/* uart device registration */ struct amba_device uart_device[] = { { .dev = { @@ -50,7 +50,7 @@ struct amba_device uart_device[] = { } }; -/* gpio device registeration */ +/* gpio device registration */ static struct pl061_platform_data gpio_plat_data[] = { { .gpio_base = 0, diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 801b21e7f677..32a7b0f7e9f7 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM bool "Dual RAM" help Select this if you want support for Dual RAM phones. - This is two RAM memorys on different EMIFs. + This is two RAM memories on different EMIFs. endchoice config U300_DEBUG diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h index 193da2df732c..6193aaa47794 100644 --- a/arch/arm/mach-u300/include/mach/coh901318.h +++ b/arch/arm/mach-u300/include/mach/coh901318.h @@ -24,7 +24,7 @@ * @src_addr: transfer source address * @dst_addr: transfer destination address * @link_addr: physical address to next lli - * @virt_link_addr: virtual addres of next lli (only used by pool_free) + * @virt_link_addr: virtual address of next lli (only used by pool_free) * @phy_this: physical address of current lli (only used by pool_free) */ struct coh901318_lli { @@ -90,7 +90,7 @@ struct powersave { * struct coh901318_platform - platform arch structure * @chans_slave: specifying dma slave channels * @chans_memcpy: specifying dma memcpy channels - * @access_memory_state: requesting DMA memeory access (on / off) + * @access_memory_state: requesting DMA memory access (on / off) * @chan_conf: dma channel configurations * @max_channels: max number of dma chanenls */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 86781f7b0c0c..664c453babbe 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -66,7 +66,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 -/* switch betwean IRQ and FIQ */ +/* switch between IRQ and FIQ */ extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); #endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 7eaa8edf3b14..79ac24ceb54d 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register - * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM + * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index 5f84913dcd91..750f4d803845 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -1197,7 +1197,7 @@ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ /* TWI_SLAVE_STAT Masks */ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index 09475034c6a1..e3ab78ef9001 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -1206,7 +1206,7 @@ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ /* TWI_SLAVE_STAT Masks */ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index 0323e6bacdae..042064b2b44a 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -1523,7 +1523,7 @@ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ /* TWI_SLAVE_STAT Masks */ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index 7a8ac5f44204..d85d128c97ca 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -2185,7 +2185,7 @@ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ /* TWIx_SLAVE_STAT Masks */ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S index e705f5cce969..d671fed451c9 100644 --- a/arch/cris/arch-v32/lib/nand_init.S +++ b/arch/cris/arch-v32/lib/nand_init.S @@ -139,7 +139,7 @@ copy_nand_to_ram: lsrq 8, $r4 move.b $r4, [$r1] ; Row address lsrq 8, $r4 - move.b $r4, [$r1] ; Row adddress + move.b $r4, [$r1] ; Row address moveq 20, $r4 2: bne 2b subq 1, $r4 diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h index d474818a537e..461c089db765 100644 --- a/arch/cris/include/asm/etraxgpio.h +++ b/arch/cris/include/asm/etraxgpio.h @@ -1,5 +1,5 @@ /* - * The following devices are accessable using this driver using + * The following devices are accessible using this driver using * GPIO_MAJOR (120) and a couple of minor numbers. * * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10): diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug index ee671c3f2c74..e8d1b236ad8c 100644 --- a/arch/h8300/Kconfig.debug +++ b/arch/h8300/Kconfig.debug @@ -48,7 +48,7 @@ config DEFAULT_CMDLINE builtin kernel commandline enabled. config KERNEL_COMMAND - string "Buildin commmand string" + string "Buildin command string" depends on DEFAULT_CMDLINE help builtin kernel commandline strings. diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c index fb8f9f59a1ed..f1e17d3d6cd9 100644 --- a/arch/ia64/kvm/mmio.c +++ b/arch/ia64/kvm/mmio.c @@ -130,7 +130,7 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest, local_irq_save(psr); - /*Intercept the acces for PIB range*/ + /*Intercept the access for PIB range*/ if (iot == GPFN_PIB) { if (!dir) lsapic_write(vcpu, src_pa, s, *dest); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index e5916a516e58..647e518c90bc 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -130,7 +130,7 @@ static void restore_core_regs(void) au_writel(sleep_usb[1], USBD_ENABLE); au_sync(); #else - /* enable accces to OTG memory */ + /* enable access to OTG memory */ au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); au_sync(); diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h index 076f2eeaa575..c86ef094ec37 100644 --- a/arch/mips/include/asm/mach-powertv/ioremap.h +++ b/arch/mips/include/asm/mach-powertv/ioremap.h @@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma) } /* These are not portable and should not be used in drivers. Drivers should - * be using ioremap() and friends to map physical addreses to virtual + * be using ioremap() and friends to map physical addresses to virtual * addresses and dma_map*() and friends to map virtual addresses into DMA * addresses and back. */ diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 5742bb4d78f4..de4433c5a771 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = { /* Early prototypes of the QI LB60 had only 1GB of NAND. * In order to support these devices aswell the partition and ecc layout is - * initalized depending on the NAND size */ + * initialized depending on the NAND size */ static struct mtd_partition qi_lb60_partitions_1gb[] = { { .name = "NAND BOOT partition", @@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void) board_gpio_setup(); if (qi_lb60_init_platform_devices()) - panic("Failed to initalize platform devices\n"); + panic("Failed to initialize platform devices\n"); return 0; } diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c index 38f60f35156c..88e6aeda5bf1 100644 --- a/arch/mips/jz4740/gpio.c +++ b/arch/mips/jz4740/gpio.c @@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void) for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i) jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i); - printk(KERN_INFO "JZ4740 GPIO initalized\n"); + printk(KERN_INFO "JZ4740 GPIO initialized\n"); return 0; } diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index b27419c84919..a96d281f9221 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -43,7 +43,7 @@ static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; static char *mtypes[3] = { "Dont use memory", "YAMON PROM memory", - "Free memmory", + "Free memory", }; #endif diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c index 385f035b24e4..0583c463e5f1 100644 --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port) mem_access_subid.s.ror = 0; /* Disable Relaxed Ordering for Writes. */ mem_access_subid.s.row = 0; - /* PCIe Adddress Bits <63:34>. */ + /* PCIe Address Bits <63:34>. */ mem_access_subid.s.ba = 0; /* diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c index 73880ad29bc2..fb3d29660c42 100644 --- a/arch/mips/powertv/memory.c +++ b/arch/mips/powertv/memory.c @@ -57,7 +57,7 @@ unsigned long ptv_memsize; /* - * struct low_mem_reserved - Items in low memmory that are reserved + * struct low_mem_reserved - Items in low memory that are reserved * @start: Physical address of item * @size: Size, in bytes, of this item * @is_aliased: True if this is RAM aliased from another location. If false, diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 9a0be810cafa..96e69a00ffc8 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata; /* * allocate pci_controller and resources. - * mem_base, io_base: physical addresss. 0 for auto assignment. + * mem_base, io_base: physical address. 0 for auto assignment. * mem_size and io_size means max size on auto assignment. * pcic must be &txx9_primary_pcic or NULL. */ diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h index 4b0e15206006..6b6dc20b0beb 100644 --- a/arch/powerpc/include/asm/8xx_immap.h +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -93,7 +93,7 @@ typedef struct mem_ctlr { } memctl8xx_t; /*----------------------------------------------------------------------- - * BR - Memory Controler: Base Register 16-9 + * BR - Memory Controller: Base Register 16-9 */ #define BR_BA_MSK 0xffff8000 /* Base Address Mask */ #define BR_AT_MSK 0x00007000 /* Address Type Mask */ @@ -110,7 +110,7 @@ typedef struct mem_ctlr { #define BR_V 0x00000001 /* Bank Valid */ /*----------------------------------------------------------------------- - * OR - Memory Controler: Option Register 16-11 + * OR - Memory Controller: Option Register 16-11 */ #define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ #define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 7fd90d02d8c6..c4d2b7167568 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr) * The pm_interval register is setup to write the SPU PC value into the * trace buffer at the maximum rate possible. The trace buffer is configured * to store the PCs, wrapping when it is full. The performance counter is - * intialized to the max hardware count minus the number of events, N, between + * initialized to the max hardware count minus the number of events, N, between * samples. Once the N events have occured, a HW counter overflow occurs * causing the generation of a HW counter interrupt which also stops the * writing of the SPU PC values to the trace buffer. Hence the last PC diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S index 1930543c98d3..3d1ecd211776 100644 --- a/arch/powerpc/platforms/83xx/suspend-asm.S +++ b/arch/powerpc/platforms/83xx/suspend-asm.S @@ -231,7 +231,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) ori r4, r4, 0x002a mtspr SPRN_DBAT0L, r4 lis r8, TMP_VIRT_IMMR@h - ori r4, r8, 0x001e /* 1 MByte accessable from Kernel Space only */ + ori r4, r8, 0x001e /* 1 MByte accessible from Kernel Space only */ mtspr SPRN_DBAT0U, r4 isync @@ -241,7 +241,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) ori r4, r4, 0x002a mtspr SPRN_DBAT1L, r4 lis r9, (TMP_VIRT_IMMR + 0x01000000)@h - ori r4, r9, 0x001e /* 1 MByte accessable from Kernel Space only */ + ori r4, r9, 0x001e /* 1 MByte accessible from Kernel Space only */ mtspr SPRN_DBAT1U, r4 isync @@ -253,7 +253,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) li r4, 0x0002 mtspr SPRN_DBAT2L, r4 lis r4, KERNELBASE@h - ori r4, r4, 0x001e /* 1 MByte accessable from Kernel Space only */ + ori r4, r4, 0x001e /* 1 MByte accessible from Kernel Space only */ mtspr SPRN_DBAT2U, r4 isync diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index b341018326df..6c4b5837fc8a 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -566,10 +566,10 @@ static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo) case PS3_DEV_TYPE_STOR_DISK: result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK); - /* Some devices are not accessable from the Other OS lpar. */ + /* Some devices are not accessible from the Other OS lpar. */ if (result == -ENODEV) { result = 0; - pr_debug("%s:%u: not accessable\n", __func__, + pr_debug("%s:%u: not accessible\n", __func__, __LINE__); } diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 59d9712d7364..92290ff4761a 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -44,7 +44,7 @@ * @lock: * @ipi_debug_brk_mask: * - * The HV mantains per SMT thread mappings of HV outlet to HV plug on + * The HV maintains per SMT thread mappings of HV outlet to HV plug on * behalf of the guest. These mappings are implemented as 256 bit guest * supplied bitmaps indexed by plug number. The addresses of the bitmaps * are registered with the HV through lv1_configure_irq_state_bitmap(). diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index eb4cc4ec7952..d1bffbcd9d52 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page) } /* - * Flush the range [start,end] of kernel virtual adddress space from + * Flush the range [start,end] of kernel virtual address space from * the I-cache. The corresponding range must be purged from the * D-cache also because the SH-5 doesn't have cache snooping between * the caches. The addresses will be visible through the superpage diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c index 42ad2ba85010..1e9770936c3b 100644 --- a/arch/sparc/kernel/traps_64.c +++ b/arch/sparc/kernel/traps_64.c @@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] = static const char CHAFSR_IERR_msg[] = "Internal processor error"; static const char CHAFSR_ISAP_msg[] = - "System request parity error on incoming addresss"; + "System request parity error on incoming address"; static const char CHAFSR_UCU_msg[] = "Uncorrectable E-cache ECC error for ifetch/data"; static const char CHAFSR_UCC_msg[] = diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index 271de94c3810..b4389a468fb6 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd); static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, - unsigned long adddress) + unsigned long address) { ___pmd_free_tlb(tlb, pmd); } diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index cae9c3cb95cf..c3e6d9a3de65 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -902,7 +902,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); /* * The below -8 is to reserve 8 bytes on top of the ring0 stack. * This is necessary to guarantee that the entire "struct pt_regs" - * is accessable even if the CPU haven't stored the SS/ESP registers + * is accessible even if the CPU haven't stored the SS/ESP registers * on the stack (interrupt gate does not save these registers * when switching to the same priv ring). * Therefore beware: accessing the ss/esp fields of the diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index d2fdb0826df2..57ca77787220 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom, dma_dom->aperture_size += APERTURE_RANGE_SIZE; - /* Intialize the exclusion range if necessary */ + /* Initialize the exclusion range if necessary */ for_each_iommu(iommu) { if (iommu->exclusion_start && iommu->exclusion_start >= dma_dom->aperture[index]->offset @@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom) /* * Allocates a new protection domain usable for the dma_ops functions. - * It also intializes the page table and the address allocator data + * It also initializes the page table and the address allocator data * structures required for the dma_ops interface */ static struct dma_ops_domain *dma_ops_domain_alloc(void) diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c index 65df603622b2..25bfdbb5b130 100644 --- a/arch/x86/kernel/early_printk_mrst.c +++ b/arch/x86/kernel/early_printk_mrst.c @@ -103,7 +103,7 @@ struct dw_spi_reg { static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; static u32 *pclk_spi0; -/* Always contains an accessable address, start with 0 */ +/* Always contains an accessible address, start with 0 */ static struct dw_spi_reg *pspi; static struct kmsg_dumper dw_dumper; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index bcece91dd311..8e09aa3aa6d6 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -124,7 +124,7 @@ ENTRY(startup_32) movsl movl pa(boot_params) + NEW_CL_POINTER,%esi andl %esi,%esi - jz 1f # No comand line + jz 1f # No command line movl $pa(boot_command_line),%edi movl $(COMMAND_LINE_SIZE/4),%ecx rep diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 4cd59b0d7c15..78ee4b1d4e85 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1030,7 +1030,7 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create) /* * Add group onto cgroup list. It might happen that bdi->dev is - * not initiliazed yet. Initialize this new group without major + * not initialized yet. Initialize this new group without major * and minor info and this info will be filled in once a new thread * comes for IO. See code above. */ diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index bdbfaf22bd14..962a3ccff6fd 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -93,7 +93,7 @@ #define AOPOBJ_AML_CONSTANT 0x01 /* Integer is an AML constant */ #define AOPOBJ_STATIC_POINTER 0x02 /* Data is part of an ACPI table, don't delete */ -#define AOPOBJ_DATA_VALID 0x04 /* Object is intialized and data is valid */ +#define AOPOBJ_DATA_VALID 0x04 /* Object is initialized and data is valid */ #define AOPOBJ_OBJECT_INITIALIZED 0x08 /* Region is initialized, _REG was run */ #define AOPOBJ_SETUP_COMPLETE 0x10 /* Region setup is complete */ #define AOPOBJ_INVALID 0x20 /* Host OS won't allow a Region address */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 7f77c67d267c..5b0295a923a7 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2240,7 +2240,7 @@ int ata_dev_configure(struct ata_device *dev) if (id[ATA_ID_CFA_KEY_MGMT] & 1) ata_dev_printk(dev, KERN_WARNING, "supports DRM functions and may " - "not be fully accessable.\n"); + "not be fully accessible.\n"); snprintf(revbuf, 7, "CFA"); } else { snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); @@ -2248,7 +2248,7 @@ int ata_dev_configure(struct ata_device *dev) if (ata_id_has_tpm(id)) ata_dev_printk(dev, KERN_WARNING, "supports DRM functions and may " - "not be fully accessable.\n"); + "not be fully accessible.\n"); } dev->n_sectors = ata_id_n_sectors(id); diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index b777176ff494..e079cf29ed5d 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -370,7 +370,7 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev, if (pci_resource_len(pdev, 0) == 0) return -ENODEV; - /* map IO regions and intialize host accordingly */ + /* map IO regions and initialize host accordingly */ rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h index 5042bb2dab15..f53a43ae2bbe 100644 --- a/drivers/atm/idt77252.h +++ b/drivers/atm/idt77252.h @@ -572,7 +572,7 @@ struct idt77252_dev #define SAR_STAT_TSQF 0x00001000 /* Transmit Status Queue full */ #define SAR_STAT_TMROF 0x00000800 /* Timer overflow */ #define SAR_STAT_PHYI 0x00000400 /* PHY device Interrupt flag */ -#define SAR_STAT_CMDBZ 0x00000200 /* ABR SAR Comand Busy Flag */ +#define SAR_STAT_CMDBZ 0x00000200 /* ABR SAR Command Busy Flag */ #define SAR_STAT_FBQ3A 0x00000100 /* Free Buffer Queue 3 Attention */ #define SAR_STAT_FBQ2A 0x00000080 /* Free Buffer Queue 2 Attention */ #define SAR_STAT_RSQF 0x00000040 /* Receive Status Queue full */ diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 9309d4724e13..ad8e207784d4 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2063,7 +2063,7 @@ static int tx_init(struct atm_dev *dev) - UBR Table size is 4K - UBR wait queue is 4K since the table and wait queues are contiguous, all the bytes - can be initialized by one memeset. + can be initialized by one memeset. */ vcsize_sel = 0; @@ -2089,7 +2089,7 @@ static int tx_init(struct atm_dev *dev) - ABR Table size is 2K - ABR wait queue is 2K since the table and wait queues are contiguous, all the bytes - can be intialized by one memeset. + can be initialized by one memeset. */ i = ABR_SCHED_TABLE * iadev->memSize; writew((i >> 11) & 0xffff, iadev->seg_reg+ABR_SBPTR_BASE); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 31b526661ec4..c5356ef7e54e 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -8,7 +8,7 @@ * * * The driver model core calls device_pm_add() when a device is registered. - * This will intialize the embedded device_pm_info object in the device + * This will initialize the embedded device_pm_info object in the device * and add it to the list of power-controlled devices. sysfs entries for * controlling device power management will also be added. * diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 338bc4eed1f3..da8b7f161cdb 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1060,8 +1060,8 @@ static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data) * mid_setup_dma - Setup the DMA controller * @pdev: Controller PCI device structure * - * Initilize the DMA controller, channels, registers with DMA engine, - * ISR. Initilize DMA controller channels. + * Initialize the DMA controller, channels, registers with DMA engine, + * ISR. Initialize DMA controller channels. */ static int mid_setup_dma(struct pci_dev *pdev) { @@ -1219,7 +1219,7 @@ static void middma_shutdown(struct pci_dev *pdev) * @pdev: Controller PCI device structure * @id: pci device id structure * - * Initilize the PCI device, map BARs, query driver data. + * Initialize the PCI device, map BARs, query driver data. * Call setup_dma to complete contoller and chan initilzation */ static int __devinit intel_mid_dma_probe(struct pci_dev *pdev, diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h index 60e0d1c72dee..6f8b07131ec4 100644 --- a/drivers/edac/amd8131_edac.h +++ b/drivers/edac/amd8131_edac.h @@ -99,7 +99,7 @@ struct amd8131_dev_info { /* * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC - * Controler, and ATCA-6101 has two AMD8131 chipsets, so there are + * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are * four PCIX Bridges on ATCA-6101 altogether. * * These PCIX Bridges share the same PCI Device ID and are all of diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index c973004c002c..db1df59ae2b6 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -47,7 +47,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) offset = address & ~PAGE_MASK; syndrome = (ar & 0x000000001fe00000ul) >> 21; - /* TODO: Decoding of the error addresss */ + /* TODO: Decoding of the error address */ edac_mc_handle_ce(mci, csrow->first_page + pfn, offset, syndrome, 0, chan, ""); } @@ -68,7 +68,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) pfn = address >> PAGE_SHIFT; offset = address & ~PAGE_MASK; - /* TODO: Decoding of the error addresss */ + /* TODO: Decoding of the error address */ edac_mc_handle_ue(mci, csrow->first_page + pfn, offset, 0, ""); } diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index d7ca43a828bd..035eaaf2d906 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -258,7 +258,7 @@ enum scrub_type { * for single channel are 64 bits, for dual channel 128 * bits. * - * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory. + * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. * Motherboards commonly drive two chip-select pins to * a memory stick. A single-ranked stick, will occupy * only one of those rows. The other will be unused. diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c index 070cea41b661..b9f0c20df1aa 100644 --- a/drivers/edac/ppc4xx_edac.c +++ b/drivers/edac/ppc4xx_edac.c @@ -873,7 +873,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1) } /** - * ppc4xx_edac_init_csrows - intialize driver instance rows + * ppc4xx_edac_init_csrows - initialize driver instance rows * @mci: A pointer to the EDAC memory controller instance * associated with the ibm,sdram-4xx-ddr2 controller for which * the csrows (i.e. banks/ranks) are being initialized. @@ -881,7 +881,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1) * currently set for the controller, from which bank width * and memory typ information is derived. * - * This routine intializes the virtual "chip select rows" associated + * This routine initializes the virtual "chip select rows" associated * with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2 * controller bank/rank is mapped to a row. * @@ -992,7 +992,7 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1) } /** - * ppc4xx_edac_mc_init - intialize driver instance + * ppc4xx_edac_mc_init - initialize driver instance * @mci: A pointer to the EDAC memory controller instance being * initialized. * @op: A pointer to the OpenFirmware device tree node associated diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index fe359a239df3..4707cbdb35cd 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -1314,7 +1314,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS { USHORT usPrescale; //Ratio between Engine clock and I2C clock - USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID + USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte UCHAR ucSlaveAddr; //Read from which slave diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index c9fffd0389fe..2bd3469b3071 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -434,7 +434,7 @@ static int read_i2c(struct nmk_i2c_dev *dev) } if (timeout == 0) { - /* controler has timedout, re-init the h/w */ + /* controller has timedout, re-init the h/w */ dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n"); (void) init_hw(dev); status = -ETIMEDOUT; @@ -498,7 +498,7 @@ static int write_i2c(struct nmk_i2c_dev *dev) } if (timeout == 0) { - /* controler has timedout, re-init the h/w */ + /* controller has timedout, re-init the h/w */ dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n"); (void) init_hw(dev); status = -ETIMEDOUT; diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h index 4bb997aa39d0..83d2e19d31ae 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_wr.h +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -689,7 +689,7 @@ struct t3_swrq { * A T3 WQ implements both the SQ and RQ. */ struct t3_wq { - union t3_wr *queue; /* DMA accessable memory */ + union t3_wr *queue; /* DMA accessible memory */ dma_addr_t dma_addr; /* DMA address for HW */ DEFINE_DMA_UNMAP_ADDR(mapping); /* unmap kruft */ u32 error; /* 1 once we go to ERROR */ diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 584d443b5335..ead2627c06a8 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -314,7 +314,7 @@ MODULE_PARM_DESC(txselect, \ #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) /* - * Per-context kernel registers. Acess only with qib_read_kreg_ctxt() + * Per-context kernel registers. Access only with qib_read_kreg_ctxt() * or qib_write_kreg_ctxt() */ #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 06ea8da95c62..6675bd7dde19 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -610,7 +610,7 @@ config TOUCHSCREEN_USB_ZYTRONIC config TOUCHSCREEN_USB_ETT_TC45USB default y - bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED + bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_NEXIO diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index 178942a2ee61..8a3c5cfc4fea 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -2318,7 +2318,7 @@ static int gigaset_probe(struct usb_interface *interface, __func__, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode, GIGASET_MODULENAME); if (!cs) @@ -2576,7 +2576,7 @@ static int __init bas_gigaset_init(void) { int result; - /* allocate memory for our driver state and intialize it */ + /* allocate memory for our driver state and initialize it */ driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, GIGASET_MODULENAME, GIGASET_DEVNAME, &gigops, THIS_MODULE); diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index d151dcbf770d..0ef09d0eb96b 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -513,7 +513,7 @@ gigaset_tty_open(struct tty_struct *tty) return -ENODEV; } - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME); if (!cs) goto error; @@ -771,7 +771,7 @@ static int __init ser_gigaset_init(void) return rc; } - /* allocate memory for our driver state and intialize it */ + /* allocate memory for our driver state and initialize it */ driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, GIGASET_MODULENAME, GIGASET_DEVNAME, &ops, THIS_MODULE); diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index 4a66338f4e7d..5e3300d8a2a5 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -695,7 +695,7 @@ static int gigaset_probe(struct usb_interface *interface, dev_info(&udev->dev, "%s: Device matched ... !\n", __func__); - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME); if (!cs) return -ENODEV; @@ -894,7 +894,7 @@ static int __init usb_gigaset_init(void) { int result; - /* allocate memory for our driver state and intialize it */ + /* allocate memory for our driver state and initialize it */ driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, GIGASET_MODULENAME, GIGASET_DEVNAME, &ops, THIS_MODULE); diff --git a/drivers/isdn/hardware/mISDN/ipac.h b/drivers/isdn/hardware/mISDN/ipac.h index 74a6ccf9065c..8121e046b739 100644 --- a/drivers/isdn/hardware/mISDN/ipac.h +++ b/drivers/isdn/hardware/mISDN/ipac.h @@ -29,7 +29,7 @@ struct isac_hw { u32 type; u32 off; /* offset to isac regs */ char *name; - spinlock_t *hwlock; /* lock HW acccess */ + spinlock_t *hwlock; /* lock HW access */ read_reg_func *read_reg; write_reg_func *write_reg; fifo_func *read_fifo; @@ -70,7 +70,7 @@ struct ipac_hw { struct hscx_hw hscx[2]; char *name; void *hw; - spinlock_t *hwlock; /* lock HW acccess */ + spinlock_t *hwlock; /* lock HW access */ struct module *owner; u32 type; read_reg_func *read_reg; diff --git a/drivers/isdn/hardware/mISDN/isar.h b/drivers/isdn/hardware/mISDN/isar.h index 4a134acd44d0..9962bdf699c7 100644 --- a/drivers/isdn/hardware/mISDN/isar.h +++ b/drivers/isdn/hardware/mISDN/isar.h @@ -44,7 +44,7 @@ struct isar_ch { struct isar_hw { struct isar_ch ch[2]; void *hw; - spinlock_t *hwlock; /* lock HW acccess */ + spinlock_t *hwlock; /* lock HW access */ char *name; struct module *owner; read_reg_func *read_reg; diff --git a/drivers/isdn/hisax/isar.c b/drivers/isdn/hisax/isar.c index 40b914bded8c..2e72227bd071 100644 --- a/drivers/isdn/hisax/isar.c +++ b/drivers/isdn/hisax/isar.c @@ -1427,8 +1427,8 @@ modeisar(struct BCState *bcs, int mode, int bc) &bcs->hw.isar.reg->Flags)) bcs->hw.isar.dpath = 1; else { - printk(KERN_WARNING"isar modeisar analog funktions only with DP1\n"); - debugl1(cs, "isar modeisar analog funktions only with DP1"); + printk(KERN_WARNING"isar modeisar analog functions only with DP1\n"); + debugl1(cs, "isar modeisar analog functions only with DP1"); return(1); } break; diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c index 97a4e9b25fe4..a9d83b5d0e49 100644 --- a/drivers/media/video/cx25840/cx25840-ir.c +++ b/drivers/media/video/cx25840/cx25840-ir.c @@ -261,7 +261,7 @@ static u16 ns_to_pulse_width_count(u32 ns, u16 divider) u32 rem; /* - * The 2 lsb's of the pulse width timer count are not accessable, hence + * The 2 lsb's of the pulse width timer count are not accessible, hence * the (1 << 2) */ n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */ diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index 188841b476e0..ebd5c4338ebb 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -33,7 +33,7 @@ extern spinlock_t vpif_lock; #define regr(reg) readl((reg) + vpif_base) #define regw(value, reg) writel(value, (reg + vpif_base)) -/* Register Addresss Offsets */ +/* Register Address Offsets */ #define VPIF_PID (0x0000) #define VPIF_CH0_CTRL (0x0004) #define VPIF_CH1_CTRL (0x0008) diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c index 7918680917d0..3e5cf27ec2b2 100644 --- a/drivers/media/video/davinci/vpss.c +++ b/drivers/media/video/davinci/vpss.c @@ -85,7 +85,7 @@ enum vpss_platform_type { /* * vpss operations. Depends on platform. Not all functions are available * on all platforms. The api, first check if a functio is available before - * invoking it. In the probe, the function ptrs are intialized based on + * invoking it. In the probe, the function ptrs are initialized based on * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc. */ struct vpss_hw_ops { diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 15f8793e325b..21d7c0d8f51f 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -1286,7 +1286,7 @@ static int omap_vout_release(struct file *file) videobuf_mmap_free(q); /* Even if apply changes fails we should continue - freeing allocated memeory */ + freeing allocated memory */ if (vout->streaming) { u32 mask = 0; diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c index e1bac5051460..cdd8e348a543 100644 --- a/drivers/media/video/saa7164/saa7164-core.c +++ b/drivers/media/video/saa7164/saa7164-core.c @@ -653,8 +653,8 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id) goto out; } - /* Check that the hardware is accessable. If the status bytes are - * 0xFF then the device is not accessable, the the IRQ belongs + /* Check that the hardware is accessible. If the status bytes are + * 0xFF then the device is not accessible, the the IRQ belongs * to another driver. * 4 x u32 interrupt registers. */ diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 494957b10bac..7f38549715b6 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -147,7 +147,7 @@ enum sn9c102_i2c_interface { struct sn9c102_sensor { char name[32], /* sensor name */ - maintainer[64]; /* name of the mantainer <email> */ + maintainer[64]; /* name of the maintainer <email> */ enum sn9c102_bridge supported_bridge; /* supported SN9C1xx bridges */ diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 37fe16181e3c..1f04438695dd 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -95,7 +95,7 @@ struct zoran_params { int quality; /* Measure for quality of compressed images. * Scales linearly with the size of the compressed images. - * Must be beetween 0 and 100, 100 is a compression + * Must be between 0 and 100, 100 is a compression * ratio of 1:4 */ int odd_even; /* Which field should come first ??? */ diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index 691620dbedd2..8b04810df469 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -268,7 +268,7 @@ /* Compatibility Error : IR Disabled */ #define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030) -/* Compatibility Error : Inquiry Comand failed */ +/* Compatibility Error : Inquiry Command failed */ #define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031) /* Compatibility Error : Device not direct access device */ #define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 3e57b61ca446..3358c0af3466 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -7977,7 +7977,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) NULL, /* 2Eh */ NULL, /* 2Fh */ "Compatibility Error: IR Disabled", /* 30h */ - "Compatibility Error: Inquiry Comand Failed", /* 31h */ + "Compatibility Error: Inquiry Command Failed", /* 31h */ "Compatibility Error: Device not Direct Access " "Device ", /* 32h */ "Compatibility Error: Removable Device Found", /* 33h */ diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 83a5115f0251..5651f77a8cc1 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1146,7 +1146,7 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc, * * This function will delete scheduled target reset from the list and * try to send next target reset. This will be called from completion - * context of any Task managment command. + * context of any Task management command. */ void diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index f87a9d405a5e..ae7cad185898 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -309,7 +309,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq) * @ireq: I2O block request * @mptr: message body pointer * - * Builds the SG list and map it to be accessable by the controller. + * Builds the SG list and map it to be accessible by the controller. * * Returns 0 on failure or 1 on success. */ diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c index 9e3879ef58f2..fe8616a8d287 100644 --- a/drivers/misc/arm-charlcd.c +++ b/drivers/misc/arm-charlcd.c @@ -313,7 +313,7 @@ static int __init charlcd_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work); schedule_delayed_work(&lcd->init_work, 0); - dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n", + dev_info(&pdev->dev, "initialized ARM character LCD at %08x\n", lcd->phybase); return 0; diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 217f82037fc1..bfc8a8ae55df 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -257,7 +257,7 @@ static u32 get_card_status(struct mmc_card *card, struct request *req) cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) - printk(KERN_ERR "%s: error %d sending status comand", + printk(KERN_ERR "%s: error %d sending status command", req->rq_disk->disk_name, err); return cmd.resp[0]; } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d618e8673996..c99a1fcd97f6 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -462,7 +462,7 @@ config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) help - This selects the MMC Host Interface controler (MMCIF). + This selects the MMC Host Interface controller (MMCIF). This driver supports MMCIF in sh7724/sh7757/sh7372. diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 41e5a60493ad..ef72e874ca36 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -192,7 +192,7 @@ static inline void SEND_STOP(struct au1xmmc_host *host) au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host)); au_sync(); - /* Send the stop commmand */ + /* Send the stop command */ au_writel(STOP_CMD, HOST_CMD(host)); } diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index f472c2714eb8..bbc298fd2a15 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -446,7 +446,7 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev, mmc->max_seg_size = 1024 * 512; mmc->max_blk_size = 512; - /* reset the controler */ + /* reset the controller */ if (sdricoh_reset(host)) { dev_dbg(dev, "could not reset\n"); result = -EIO; @@ -478,7 +478,7 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); - /* search pci cardbus bridge that contains the mmc controler */ + /* search pci cardbus bridge that contains the mmc controller */ /* the io region is already claimed by yenta_socket... */ while ((pci_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 1f75a1b1f7c3..31bf376b82a0 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -821,7 +821,7 @@ retry: * * Wait for command done. This is a helper function for nand_wait used when * we are in interrupt context. May happen when in panic and trying to write - * an oops trough mtdoops. + * an oops through mtdoops. */ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip, unsigned long timeo) diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index e9ad16f00b56..4a6f0eac8b12 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -4947,7 +4947,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); memset(&ilt, 0, sizeof(struct bnx2x_ilt)); - /* initalize dummy TM client */ + /* initialize dummy TM client */ ilt_cli.start = 0; ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; ilt_cli.client_num = ILT_CLIENT_TM; diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 1cefe489a955..245220af9feb 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -1604,7 +1604,7 @@ (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */ #define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses - in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 - + in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 - timer 8 */ #define MISC_REG_SW_TIMER_VAL 0xa5c0 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 881914bc4e9c..106718c1be5b 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port) lacpdu_header = (struct lacpdu_header *)skb_put(skb, length); memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN); - /* Note: source addres is set to be the member's PERMANENT address, + /* Note: source address is set to be the member's PERMANENT address, because we use it to identify loopback lacpdus in receive. */ memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN); lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU; @@ -881,7 +881,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker) marker_header = (struct bond_marker_header *)skb_put(skb, length); memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN); - /* Note: source addres is set to be the member's PERMANENT address, + /* Note: source address is set to be the member's PERMANENT address, because we use it to identify loopback MARKERs in receive. */ memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN); marker_header->hdr.h_proto = PKT_TYPE_LACPDU; @@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave) return -1; } - //check that the slave has not been intialized yet. + //check that the slave has not been initialized yet. if (SLAVE_AD_INFO(slave).port.slave != slave) { // port initialization diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index 63ebf76d2390..8a43c7e19701 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -556,7 +556,7 @@ struct chelsio_vpd_t { #define EEPROM_MAX_POLL 4 /* - * Read SEEPROM. A zero is written to the flag register when the addres is + * Read SEEPROM. A zero is written to the flag register when the address is * written to the Control register. The hardware device will set the flag to a * one when 4B have been transferred to the Data register. */ diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c index a8766fb2f9ab..e13b7fe9d082 100644 --- a/drivers/net/cxgb3/mc5.c +++ b/drivers/net/cxgb3/mc5.c @@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5) /* * Initialization that requires the OS and protocol layers to already - * be intialized goes here. + * be initialized goes here. */ int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, unsigned int nroutes) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 3a6adf0b3e9d..0b197043bc34 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -607,7 +607,7 @@ struct t3_vpd { * * Read a 32-bit word from a location in VPD EEPROM using the card's PCI * VPD ROM capability. A zero is written to the flag bit when the - * addres is written to the control register. The hardware device will + * address is written to the control register. The hardware device will * set the flag to 1 when 4 bytes have been read into the data register. */ int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index ecd9f6c6bcd5..5e820f4e68b9 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -41,7 +41,7 @@ struct e1000_hw; struct e1000_hw_stats; /* Enumerated types specific to the e1000 hardware */ -/* Media Access Controlers */ +/* Media Access Controllers */ typedef enum { e1000_undefined = 0, e1000_82542_rev2_0, diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4686c3983fc3..1b8a43a29c01 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2194,7 +2194,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) * addresses take precedence to avoid disabling unicast filtering * when possible. * - * RAR 0 is used for the station MAC adddress + * RAR 0 is used for the station MAC address * if there are not 14 addresses, go ahead and clear the filters */ i = 1; diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 7236f1a53ba0..a655beb69320 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -300,7 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* * Ensure that the inter-port SWSM.SMBI lock bit is clear before - * first NVM or PHY acess. This should be done for single-port + * first NVM or PHY access. This should be done for single-port * devices, and for one port only on dual-port devices so that * for those devices we can still use the SMBI lock to synchronize * inter-port accesses to the PHY & NVM. diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index e3374d9a2472..38c84ba3e3c1 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -321,7 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) } /* - * Reset the PHY before any acccess to it. Doing so, ensures that + * Reset the PHY before any access to it. Doing so, ensures that * the PHY is in a known good state before we read/write PHY registers. * The generic reset is sufficient here, because we haven't determined * the PHY type yet. diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 3d3dc0c82355..b9bff5ba009f 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2976,7 +2976,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page + * e1000_get_phy_addr_for_hv_page - Get PHY address based on page * @page: page to be accessed **/ static u32 e1000_get_phy_addr_for_hv_page(u32 page) diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 7c826319ee5a..dbaec546c428 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1760,7 +1760,7 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param(autodetect, int, 0); -MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)"); +MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)"); MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 4dc39e5f0156..77fcf4459161 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -30,7 +30,7 @@ * or the type-DO IR port. * * IrDA chip set list from Toshiba Computer Engineering Corp. - * model method maker controler Version + * model method maker controller Version * Portege 320CT FIR,SIR Toshiba Oboe(Triangle) * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney) * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney) diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 0bd8fbb5bfd0..05e6b8cafb39 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1078,7 +1078,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc) /* * The defaults in the HW for RX PB 1-7 are not zero and so should be - * intialized to zero for non DCB mode otherwise actual total RX PB + * initialized to zero for non DCB mode otherwise actual total RX PB * would be bigger than programmed and filter space would run into * the PB 0 region. */ @@ -1169,7 +1169,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc) /* * The defaults in the HW for RX PB 1-7 are not zero and so should be - * intialized to zero for non DCB mode otherwise actual total RX PB + * initialized to zero for non DCB mode otherwise actual total RX PB * would be bigger than programmed and filter space would run into * the PB 0 region. */ diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index 9f8e7027b0b3..661ed1ff4c2e 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev) goto out; } /* allocate the tx and rx ring buffer descriptors. */ - /* returns a virtual addres and a physical address. */ + /* returns a virtual address and a physical address. */ lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, sizeof(*lp->tx_bd_v) * TX_BD_NUM, &lp->tx_bd_p, GFP_KERNEL); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 581836867098..5976d1d51df1 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -36,7 +36,7 @@ Rev 1.07.06 Nov. 7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning Rev 1.07.05 Nov. 6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support - Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule + Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1 Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4 diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 8b3dc1eb4015..474652a2f70d 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -12,7 +12,7 @@ /* * RX HW/SW interaction overview * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * There are 2 types of RX communication channels betwean driver and NIC. + * There are 2 types of RX communication channels between driver and NIC. * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds * info about buffer's location, size and ID. An ID field is used to identify a @@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev) } /* use PMF to accept first MAC_MCST_NUM (15) addresses */ - /* TBD: sort addreses and write them in ascending order + /* TBD: sort addresses and write them in ascending order * into RX_MAC_MCST regs. we skip this phase now and accept ALL * multicast frames throu IMF */ /* accept the rest of addresses throu IMF */ @@ -1346,7 +1346,7 @@ static void print_rxfd(struct rxf_desc *rxfd) /* * TX HW/SW interaction overview * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * There are 2 types of TX communication channels betwean driver and NIC. + * There are 2 types of TX communication channels between driver and NIC. * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets * 2) TX Data Fifo - TXD - holds descriptors of full buffers. * diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 55f3a3e667a9..e625f9530cf9 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd, break; case SIOCGIFHWADDR: - /* Get hw addres */ + /* Get hw address */ memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN); ifr.ifr_hwaddr.sa_family = tun->dev->type; if (copy_to_user(argp, &ifr, ifreq_len)) diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h index 9890d4d596d0..654295816a39 100644 --- a/drivers/net/vxge/vxge-traffic.h +++ b/drivers/net/vxge/vxge-traffic.h @@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err { * struct vxge_hw_device_stats - Contains HW per-device statistics, * including hw. * @devh: HW device handle. - * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats. + * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats. * @hw_info_dmah: DMA handle used to map hw statistics onto the device memory * space. * @hw_info_dma_acch: One more DMA handle used subsequently to free the diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index d45b08d1dbc9..94ff9b02e28e 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -125,7 +125,7 @@ static u32 dscc4_pci_config_store[16]; /* Module parameters */ MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>"); -MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler"); +MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller"); MODULE_LICENSE("GPL"); module_param(debug, int, 0); MODULE_PARM_DESC(debug,"Enable/disable extra messages"); diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index cdedab46ba21..bcb483fdc4d9 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -280,7 +280,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m) result); goto error; } - /* Extract MAC addresss */ + /* Extract MAC address */ ddi = (void *) skb->data; BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address)); d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n", diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 59ac7705e76e..8cde3a52d225 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -698,7 +698,7 @@ enum i2400m_bm_cmd_flags { * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot * rom after reading the MAC address. This is quite a dirty hack, * if you ask me -- the device requires the bootrom to be - * intialized after reading the MAC address. + * initialized after reading the MAC address. */ enum i2400m_bri { I2400M_BRI_SOFT = 1 << 1, diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index ca79ecd832fd..2a246d13b520 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -1063,7 +1063,7 @@ /* * EEPROM command register */ -#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ +#define AR5K_EEPROM_CMD 0x6008 /* Register Address */ #define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ #define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ #define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ @@ -1083,7 +1083,7 @@ /* * EEPROM config register */ -#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ +#define AR5K_EEPROM_CFG 0x6010 /* Register Address */ #define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ #define AR5K_EEPROM_CFG_SIZE_AUTO 0 #define AR5K_EEPROM_CFG_SIZE_4KBIT 1 @@ -1125,7 +1125,7 @@ * Second station id register (Upper 16 bits of MAC address + PCU settings) */ #define AR5K_STA_ID1 0x8004 /* Register Address */ -#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */ +#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */ #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ #define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index 0dc33b65e86b..be4828167012 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); } -/* Intialize B/G PHY power control */ +/* Initialize B/G PHY power control */ static void b43_phy_init_pctl(struct b43_wldev *dev) { struct ssb_bus *bus = dev->dev->bus; diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c index 35033dd342ce..28e477d01587 100644 --- a/drivers/net/wireless/b43legacy/phy.c +++ b/drivers/net/wireless/b43legacy/phy.c @@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev) phy->calibrated = 1; } -/* intialize B PHY power control +/* initialize B PHY power control * as described in http://bcm-specs.sipsolutions.net/InitPowerControl */ static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 7c7f7dcb1b1e..972b738c0e4a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, /* * XXX: The MAC address in the command buffer is often changed from * the original sent to the device. That is, the MAC address - * written to the command buffer often is not the same MAC adress + * written to the command buffer often is not the same MAC address * read from the command buffer when the command returns. This * issue has not yet been resolved and this debugging is left to * observe the problem. diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 2c8cc954d1b6..ec2c75d77cea 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv) printk(KERN_DEBUG "islpci_alloc_memory\n"); #endif - /* remap the PCI device base address to accessable */ + /* remap the PCI device base address to accessible */ if (!(priv->device_base = ioremap(pci_resource_start(priv->pdev, 0), ISL38XX_PCI_MEM_SIZE))) { @@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv) PCI_DMA_FROMDEVICE); if (!priv->pci_map_rx_address[counter]) { /* error mapping the buffer to device - accessable memory address */ + accessible memory address */ printk(KERN_ERR "failed to map skb DMA'able\n"); goto out_free; } @@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv) priv->data_low_rx[counter] = NULL; } - /* Free the acces control list and the WPA list */ + /* Free the access control list and the WPA list */ prism54_acl_clean(&priv->acl); prism54_wpa_bss_ie_clean(priv); mgt_clean(priv); diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 2fc52bc2d7dd..d44f8e20cce0 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv) MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE); if (unlikely(!priv->pci_map_rx_address[index])) { - /* error mapping the buffer to device accessable memory address */ + /* error mapping the buffer to device accessible memory address */ DEBUG(SHOW_ERROR_MESSAGES, "Error mapping DMA address\n"); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c3c206a97d54..a7d3f4c3ee0d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -274,7 +274,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, intf->beacon = entry; /* - * The MAC adddress must be configured after the device + * The MAC address must be configured after the device * has been initialized. Otherwise the device can reset * the MAC registers. * The BSSID address must only be configured in AP mode, diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index ee82df62e646..3e5befe4d03b 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page) } /* - * Get Ethernet MAC addresss. + * Get Ethernet MAC address. * * WARNING: We switch to FPAGE0 and switc back again. * Making sure there is no other WL function beening called by ISR. diff --git a/drivers/pcmcia/m32r_cfc.h b/drivers/pcmcia/m32r_cfc.h index 8146e3bee2e8..f558e1adf954 100644 --- a/drivers/pcmcia/m32r_cfc.h +++ b/drivers/pcmcia/m32r_cfc.h @@ -9,7 +9,7 @@ #endif /* - * M32R PC Card Controler + * M32R PC Card Controller */ #define M32R_PCC0_BASE 0x00ef7000 #define M32R_PCC1_BASE 0x00ef7020 diff --git a/drivers/pcmcia/m32r_pcc.h b/drivers/pcmcia/m32r_pcc.h index e4fffe417ba9..f95c58563bc8 100644 --- a/drivers/pcmcia/m32r_pcc.h +++ b/drivers/pcmcia/m32r_pcc.h @@ -5,7 +5,7 @@ #define M32R_MAX_PCC 2 /* - * M32R PC Card Controler + * M32R PC Card Controller */ #define M32R_PCC0_BASE 0x00ef7000 #define M32R_PCC1_BASE 0x00ef7020 diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 99d4f23cb435..0db482771fb5 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -1198,7 +1198,7 @@ static int __init m8xx_probe(struct platform_device *ofdev, out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); - /* intialize the fixed memory windows */ + /* initialize the fixed memory windows */ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 2d61186ad5a2..304333faf441 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7193,7 +7193,7 @@ static struct ibm_struct volume_driver_data = { * TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41) * * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * boot. Apparently the EC does not initialize it, so unless ACPI DSDT * does so, its initial value is meaningless (0x07). * * For firmware bugs, refer to: diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c index fe16b482e912..4a8ae3935b3b 100644 --- a/drivers/power/s3c_adc_battery.c +++ b/drivers/power/s3c_adc_battery.c @@ -1,5 +1,5 @@ /* - * iPAQ h1930/h1940/rx1950 battery controler driver + * iPAQ h1930/h1940/rx1950 battery controller driver * Copyright (c) Vasily Khoruzhick * Based on h1940_battery.c by Arnaud Patard * @@ -427,5 +427,5 @@ static void __exit s3c_adc_bat_exit(void) module_exit(s3c_adc_bat_exit); MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>"); -MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver"); +MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 0f19d540b655..122382dc4684 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -840,7 +840,7 @@ lcs_notify_lancmd_waiters(struct lcs_card *card, struct lcs_cmd *cmd) } /** - * Emit buffer of a lan comand. + * Emit buffer of a lan command. */ static void lcs_lancmd_timeout(unsigned long data) diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index d692e229ecba..4c09d03bcb32 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -317,7 +317,7 @@ static void zfcp_act_eval_err(struct zfcp_adapter *adapter, u32 table) /** * zfcp_cfdc_port_denied - Process "access denied" for port - * @port: The port where the acces has been denied + * @port: The port where the access has been denied * @qual: The FSF status qualifier for the access denied FSF status */ void zfcp_cfdc_port_denied(struct zfcp_port *port, diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index dbbc601948e5..7cb575654e40 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host) /* Go back and check they match */ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */ - bios_addr -= 0x1000; /* Reset the BIOS adddress */ + bios_addr -= 0x1000; /* Reset the BIOS address */ for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */ i < 0x1000; /* Firmware code size = 4K */ i++, bios_addr++) { diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index afc9aeba5edb..060ac4bd5a14 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev) * aac_fib_setup - setup the fibs * @dev: Adapter to set up * - * Allocate the PCI space for the fibs, map it and then intialise the + * Allocate the PCI space for the fibs, map it and then initialise the * fib area, the unmapped fib data and also the free list */ diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq index 5997e7c3a191..1565be9ebd49 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx.seq +++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq @@ -1178,7 +1178,7 @@ notFound: /* * Retrieve an SCB by SCBID first searching the disconnected list falling * back to DMA'ing the SCB down from the host. This routine assumes that - * ARG_1 is the SCBID of interrest and that SINDEX is the position in the + * ARG_1 is the SCBID of interest and that SINDEX is the position in the * disconnected list to start the search from. If SINDEX is SCB_LIST_NULL, * we go directly to the host for the SCB. */ diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index 28aaf349c111..40273a747d29 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -1689,7 +1689,7 @@ #define PHY_START_CAL 0x01 /* - * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC) + * HST_PCIX2 Registers, Address Range: (0x00-0xFC) */ #define PCIX_REG_BASE_ADR 0xB8040000 @@ -1802,7 +1802,7 @@ #define PCIC_TP_CTRL 0xFC /* - * EXSI Registers, Addresss Range: (0x00-0xFC) + * EXSI Registers, Address Range: (0x00-0xFC) */ #define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index 74374618010c..390168f62a13 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) int j; /* Start from Page 1 of Mode 0 and 1. */ moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE; - /* All the fields of page 1 can be intialized to 0. */ + /* All the fields of page 1 can be initialized to 0. */ for (j = 0; j < LSEQ_PAGE_SIZE; j += 4) asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0); } @@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) asd_write_reg_dword(asd_ha, SCBPRO, 0); asd_write_reg_dword(asd_ha, CSEQCON, 0); - /* Intialize CSEQ Mode 11 Interrupt Vectors. + /* Initialize CSEQ Mode 11 Interrupt Vectors. * The addresses are 16 bit wide and in dword units. * The values of their macros are in byte units. * Thus we have to divide by 4. */ @@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); for (i = 0; i < 8; i++) { - /* Intialize Mode n Link m Interrupt Enable. */ + /* Initialize Mode n Link m Interrupt Enable. */ asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF); /* Initialize Mode n Request Mailbox. */ asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0); diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c index 33c8dd51f474..aabbf3d3b394 100644 --- a/drivers/scsi/bfa/bfa_fcpim.c +++ b/drivers/scsi/bfa/bfa_fcpim.c @@ -2092,7 +2092,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) case BFA_IOIM_SM_ABORT: /** - * IO is alraedy being cleaned up implicitly + * IO is already being cleaned up implicitly */ ioim->io_cbfn = __bfa_cb_ioim_abort; break; diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index b522bf30247a..b7aa23a3b1e8 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status) switch (status) { case BFA_STATUS_OK: /* - * Initialiaze the V-Port fields + * Initialize the V-Port fields */ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps); vport->vport_stats.fdisc_accepts++; diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 54f50b07dac7..31bbfb244bc4 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, * adapter_add_device - Adds the device instance to the adaptor instance. * * @acb: The adapter device to be updated - * @dcb: A newly created and intialised device instance to add. + * @dcb: A newly created and initialised device instance to add. **/ static void adapter_add_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb) @@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb) * init_adapter - Grab the resource for the card, setup the adapter * information, set the card into a known state, create the various * tables etc etc. This basically gets all adapter information all up - * to date, intialised and gets the chip in sync with it. + * to date, initialised and gets the chip in sync with it. * * @host: This hosts adapter structure * @io_port: The base I/O port @@ -4788,7 +4788,7 @@ static void banner_display(void) * that it finds in the system. The pci_dev strcuture indicates which * instance we are being called from. * - * @dev: The PCI device to intialize. + * @dev: The PCI device to initialize. * @id: Looks like a pointer to the entry in our pci device table * that was actually matched by the PCI subsystem. * @@ -4859,7 +4859,7 @@ fail: * dc395x_remove_one - Called to remove a single instance of the * adapter. * - * @dev: The PCI device to intialize. + * @dev: The PCI device to initialize. **/ static void __devexit dc395x_remove_one(struct pci_dev *dev) { diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index c797f6b48f05..54a6ec8e131d 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1212,7 +1212,7 @@ static void fc_lun_reset_send(unsigned long data) /** * fc_lun_reset() - Send a LUN RESET command to a device * and wait for the reply - * @lport: The local port to sent the comand on + * @lport: The local port to sent the command on * @fsp: The FCP packet that identifies the LUN to be reset * @id: The SCSI command ID * @lun: The LUN ID to be reset diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f681eea57730..0e4abb96d68e 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_init - Intializes a cfg attribute + * lpfc_param_init - Initializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index a345dde16c86..2a6866e63aae 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2614,7 +2614,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la) if (unlikely(!fcf_record)) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "2554 Could not allocate memmory for " + "2554 Could not allocate memory for " "fcf record\n"); rc = -ENODEV; goto out; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 0d1e187b005d..c5614cfcc6e9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -9619,7 +9619,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id) * lpfc_sli4_queue_free - free a queue structure and associated memory * @queue: The queue structure to free. * - * This function frees a queue structure and the DMAable memeory used for + * This function frees a queue structure and the DMAable memory used for * the host resident queue. This function must be called after destroying the * queue on the HBA. **/ diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 2b4a048cadf1..deb24ad1b8d2 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -13,7 +13,7 @@ */ /* - * Comand coalescing - This feature allows the driver to be able to combine + * Command coalescing - This feature allows the driver to be able to combine * two or more commands and issue as one command in order to boost I/O * performance. Useful if the nature of the I/O is sequential. It is not very * useful for random natured I/Os. diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index f8c86b28f03f..b95285f3383f 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) #endif intx: - /* intialize the INT-X interrupt */ + /* initialize the INT-X interrupt */ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost)); return rc; diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index d53e6503c6d5..a2ed201885ae 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver); /** - * scsi_netlink_init - Called by SCSI subsystem to intialize + * scsi_netlink_init - Called by SCSI subsystem to initialize * the SCSI transport netlink interface * **/ diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 8b955b534a36..4afa81ad2caa 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * successfully intialized at least once before, and so most + * successfully initialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 154529aacc03..49596a18f953 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -341,9 +341,9 @@ static void atmel_spi_next_message(struct spi_master *master) /* * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: * - The buffer is either valid for CPU access, else NULL - * - If the buffer is valid, so is its DMA addresss + * - If the buffer is valid, so is its DMA address * - * This driver manages the dma addresss unless message->is_dma_mapped. + * This driver manages the dma address unless message->is_dma_mapped. */ static int atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 4e6245e67995..603428213d21 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -38,7 +38,7 @@ /* - * This supports acccess to SPI devices using normal userspace I/O calls. + * This supports access to SPI devices using normal userspace I/O calls. * Note that while traditional UNIX/POSIX I/O semantics are half duplex, * and often mask message boundaries, full SPI support requires full duplex * transfers. There are several kinds of internal message boundaries to diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c index a057824e7ebc..dd3874b78263 100644 --- a/drivers/staging/stradis/stradis.c +++ b/drivers/staging/stradis/stradis.c @@ -745,7 +745,7 @@ static void set_out_format(struct saa7146 *saa, int mode) } } -/* Intialize bitmangler to map from a byte value to the mangled word that +/* Initialize bitmangler to map from a byte value to the mangled word that * must be output to program the Xilinx part through the DEBI port. * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0 * transfer FPGA code, init IBM chip, transfer IBM microcode diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index ed0266462c57..1f8084d59a43 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1316,7 +1316,7 @@ static struct imx_udc_struct controller = { }; /******************************************************************************* - * USB gadged driver functions + * USB gadget driver functions ******************************************************************************* */ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index e49b75a78000..f90d003f2302 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1658,7 +1658,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd) spin_lock_irqsave(&imx21->lock, flags); - /* Reset the Host controler modules */ + /* Reset the Host controller modules */ writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH | USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC, imx21->regs + USBOTG_RST_CTRL); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 32149be4ad8e..e0cb12b573f9 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3094,7 +3094,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf) /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It - * may be relevant that VIA VT8235 controlers, where PORT_POWER is + * may be relevant that VIA VT8235 controllers, where PORT_POWER is * always set, seem to clear PORT_OCC and PORT_CSC when writing to * PORT_POWER; that's surprising, but maybe within-spec. */ diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 44f8b9225054..a6afd15f6a46 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface, goto exit; } - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); if (dev == NULL) { dev_err(&interface->dev, "Out of memory\n"); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 375664198776..7a10e48b78f9 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -768,7 +768,7 @@ static int iowarrior_probe(struct usb_interface *interface, int i; int retval = -ENOMEM; - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); if (dev == NULL) { dev_err(&interface->dev, "Out of memory\n"); diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index edffef642337..eefb8275bb7e 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * int i; int retval = -ENOMEM; - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 5d815049cbaa..1cbeaa17ffff 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1636,7 +1636,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb) struct musb_hw_ep *hw_ep; unsigned count = 0; - /* intialize endpoint list just once */ + /* initialize endpoint list just once */ INIT_LIST_HEAD(&(musb->g.ep_list)); for (epnum = 0, hw_ep = musb->endpoints; @@ -1715,7 +1715,7 @@ void musb_gadget_cleanup(struct musb *musb) * * -EINVAL something went wrong (not driver) * -EBUSY another gadget is already using the controller - * -ENOMEM no memeory to perform the operation + * -ENOMEM no memory to perform the operation * * @param driver the gadget driver * @param bind the driver's bind function diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index c7b1d8108de9..8cb9d80207fa 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -49,7 +49,7 @@ * * USB Stack port number 4 (1 based) * WUSB code port index 3 (0 based) - * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub) + * USB Address 5 (2 based -- 0 is for default, 1 for root hub) * * Now, because we don't use the concept as default address exactly * like the (wired) USB code does, we need to kind of skip it. So we diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index dee64c3b1e67..2ab704118c44 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -536,7 +536,7 @@ static int sstfb_set_par(struct fb_info *info) fbiinit2 = sst_read(FBIINIT2); fbiinit3 = sst_read(FBIINIT3); - /* everything is reset. we enable fbiinit2/3 remap : dac acces ok */ + /* everything is reset. we enable fbiinit2/3 remap : dac access ok */ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR | PCI_REMAP_DAC ); diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 8b5dd6369f82..47162de0b957 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -577,7 +577,7 @@ struct ext4_mount_options { #endif }; -/* Max physical block we can addres w/o extents */ +/* Max physical block we can address w/o extents */ #define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF /* diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 0554c48cb1fd..966ecb0d8f86 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2825,14 +2825,14 @@ fix_extent_len: * to an uninitialized extent. * * Writing to an uninitized extent may result in splitting the uninitialized - * extent into multiple /intialized unintialized extents (up to three) + * extent into multiple /initialized uninitialized extents (up to three) * There are three possibilities: * a> There is no split required: Entire extent should be uninitialized * b> Splits in two extents: Write is happening at either end of the extent * c> Splits in three extents: Somone is writing in middle of the extent * * One of more index blocks maybe needed if the extent tree grow after - * the unintialized extent split. To prevent ENOSPC occur at the IO + * the uninitialized extent split. To prevent ENOSPC occur at the IO * complete, we need to split the uninitialized extent before DIO submit * the IO. The uninitialized extent called at this time will be split * into three uninitialized extent(at most). After IO complete, the part diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 191616470466..4bc84b8adb7f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3740,9 +3740,9 @@ retry: * preallocated extents, and those write extend the file, no need to * fall back to buffered IO. * - * For holes, we fallocate those blocks, mark them as unintialized + * For holes, we fallocate those blocks, mark them as uninitialized * If those blocks were preallocated, we mark sure they are splited, but - * still keep the range to write as unintialized. + * still keep the range to write as uninitialized. * * The unwrritten extents will be converted to written when DIO is completed. * For async direct IO, since the IO may still pending when return, we diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index f935fd6600dd..4068c6c4c6f6 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -434,7 +434,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, * #1 and #2 can be simply solved by never taking the lock * here for system files (which are the only type we read * during mount). It's a heavier approach, but our main - * concern is user-accesible files anyway. + * concern is user-accessible files anyway. * * #3 works itself out because we'll eventually take the * cluster lock before trusting anything anyway. diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 5fed60de7630..71998d4d61d5 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -1916,7 +1916,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac, if (res->sr_bg_blkno) { /* Attempt to short-circuit the usual search mechanism * by jumping straight to the most recently used - * allocation group. This helps us mantain some + * allocation group. This helps us maintain some * contiguousness across allocations. */ status = ocfs2_search_one_group(ac, handle, bits_wanted, min_bits, res, &bits_left); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 9f3a78fe6ae4..7465a7ffc4fd 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -938,7 +938,7 @@ out_reclaim: * Slab object creation initialisation for the XFS inode. * This covers only the idempotent fields in the XFS inode; * all other fields need to be initialised on allocation - * from the slab. This avoids the need to repeatedly intialise + * from the slab. This avoids the need to repeatedly initialise * fields in the xfs inode that left in the initialise state * when freeing the inode. */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index c637b75b9f3f..cd77aa75c962 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -119,7 +119,7 @@ struct acpi_whea_header { struct acpi_table_bert { struct acpi_table_header header; /* Common ACPI table header */ u32 region_length; /* Length of the boot error region */ - u64 address; /* Physical addresss of the error region */ + u64 address; /* Physical address of the error region */ }; /* Boot Error Region (not a subtable, pointed to by Address field above) */ diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index ed4ba111bc8d..ce104e33cd22 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -564,7 +564,7 @@ struct cgroup_iter { /* * To iterate across the tasks in a cgroup: * - * 1) call cgroup_iter_start to intialize an iterator + * 1) call cgroup_iter_start to initialize an iterator * * 2) call cgroup_iter_next() to retrieve member tasks until it * returns NULL or until you want to end the iteration diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 68c642d8843d..59ea406be7f6 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -273,7 +273,7 @@ struct fw_cdev_event_iso_interrupt { * @closure: See &fw_cdev_event_common; * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl * @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL - * @completed: Offset into the receive buffer; data before this offest is valid + * @completed: Offset into the receive buffer; data before this offset is valid * * This event is sent in multichannel contexts (context type * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index cb93d80aa642..5582ab3d3e48 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -39,7 +39,7 @@ struct mfd_cell { size_t data_size; /* - * This resources can be specified relatievly to the parent device. + * This resources can be specified relatively to the parent device. * For accessing device you should use resources from device */ int num_resources; diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 2b2769c5ca9f..2a128c8c2718 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -99,8 +99,8 @@ typedef __s32 sctp_assoc_t; #define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */ /* Options 104-106 are deprecated and removed. Do not use this space */ #define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */ -#define SCTP_GET_PEER_ADDRS 108 /* Get all peer addresss. */ -#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local addresss. */ +#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */ +#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */ #define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */ #define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */ diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h index 8e9b222251c2..8a143ca79878 100644 --- a/include/scsi/fc/fc_fcp.h +++ b/include/scsi/fc/fc_fcp.h @@ -46,7 +46,7 @@ */ struct fcp_cmnd { __u8 fc_lun[8]; /* logical unit number */ - __u8 fc_cmdref; /* commmand reference number */ + __u8 fc_cmdref; /* command reference number */ __u8 fc_pri_ta; /* priority and task attribute */ __u8 fc_tm_flags; /* task management flags */ __u8 fc_flags; /* additional len & flags */ @@ -58,7 +58,7 @@ struct fcp_cmnd { struct fcp_cmnd32 { __u8 fc_lun[8]; /* logical unit number */ - __u8 fc_cmdref; /* commmand reference number */ + __u8 fc_cmdref; /* command reference number */ __u8 fc_pri_ta; /* priority and task attribute */ __u8 fc_tm_flags; /* task management flags */ __u8 fc_flags; /* additional len & flags */ diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 37755d621924..7242cc71bb7e 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -2913,7 +2913,7 @@ static void __init kdb_cmd_init(void) } } -/* Intialize kdb_printf, breakpoint tables and kdb state */ +/* Initialize kdb_printf, breakpoint tables and kdb state */ void __init kdb_init(int lvl) { static int kdb_init_lvl = KDB_NOT_INITIALIZED; diff --git a/kernel/kexec.c b/kernel/kexec.c index b55045bc7563..ec19b92c7ebd 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -163,7 +163,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry, * just verifies it is an address we can use. * * Since the kernel does everything in page size chunks ensure - * the destination addreses are page aligned. Too many + * the destination addresses are page aligned. Too many * special cases crop of when we don't do this. The most * insidious is getting overlapping destination addresses * simply because addresses are changed to page size diff --git a/kernel/power/swap.c b/kernel/power/swap.c index a0e4a86ccf94..cd09c22de03d 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -865,7 +865,7 @@ out_finish: /** * swsusp_read - read the hibernation image. * @flags_p: flags passed by the "frozen" kernel in the image header should - * be written into this memeory location + * be written into this memory location */ int swsusp_read(unsigned int *flags_p) diff --git a/kernel/sched.c b/kernel/sched.c index aa14a56f9d03..554c0d6c489e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2568,7 +2568,7 @@ out: * try_to_wake_up_local - try to wake up a local task with rq lock held * @p: the thread to be awakened * - * Put @p on the run-queue if it's not alredy there. The caller must + * Put @p on the run-queue if it's not already there. The caller must * ensure that this_rq() is locked, @p is bound to this_rq() and not * the current task. this_rq() stays locked over invocation. */ diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 1357c5786064..d9c5fe4ff1b2 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -1193,7 +1193,7 @@ static ssize_t bin_dn_node_address(struct file *file, buf[result] = '\0'; - /* Convert the decnet addresss to binary */ + /* Convert the decnet address to binary */ result = -EIO; nodep = strchr(buf, '.') + 1; if (!nodep) diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index c18d7efa1b4b..ddbbaf2950ef 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -678,7 +678,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq) { - /* Intialize mult/shift and max_idle_ns */ + /* Initialize mult/shift and max_idle_ns */ __clocksource_updatefreq_scale(cs, scale, freq); /* Add clocksource to the clcoksource list */ diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h index e3dfecaf13e6..6cf223764be8 100644 --- a/kernel/trace/trace_entries.h +++ b/kernel/trace/trace_entries.h @@ -53,7 +53,7 @@ */ /* - * Function trace entry - function address and parent function addres: + * Function trace entry - function address and parent function address: */ FTRACE_ENTRY(function, ftrace_entry, diff --git a/lib/nlattr.c b/lib/nlattr.c index c4706eb98d3d..18d158df6f0e 100644 --- a/lib/nlattr.c +++ b/lib/nlattr.c @@ -167,7 +167,7 @@ nla_policy_len(const struct nla_policy *p, int n) * @policy: validation policy * * Parses a stream of attributes and stores a pointer to each attribute in - * the tb array accessable via the attribute type. Attributes with a type + * the tb array accessible via the attribute type. Attributes with a type * exceeding maxtype will be silently ignored for backwards compatibility * reasons. policy may be set to NULL if no validation is required. * diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 7c06ee51a29a..c47bbe11b804 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -60,7 +60,7 @@ int swiotlb_force; static char *io_tlb_start, *io_tlb_end; /* - * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and + * The number of IO TLB blocks (in groups of 64) between io_tlb_start and * io_tlb_end. This is command line adjustable via setup_io_tlb_npages. */ static unsigned long io_tlb_nslabs; diff --git a/mm/percpu.c b/mm/percpu.c index efe816856a9d..f715d01d5ba3 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -258,7 +258,7 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, /* * (Un)populated page region iterators. Iterate over (un)populated - * page regions betwen @start and @end in @chunk. @rs and @re should + * page regions between @start and @end in @chunk. @rs and @re should * be integer variables and will be set to start and end page index of * the current region. */ diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index 29d6cbffb283..64b984091edb 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -9,7 +9,7 @@ * * However, virtual mappings need a page table and TLBs. Many Linux * architectures already map their physical space using 1-1 mappings - * via TLBs. For those arches the virtual memmory map is essentially + * via TLBs. For those arches the virtual memory map is essentially * for free if we use the same page size as the 1-1 mappings. In that * case the overhead consists of a few additional pages that are * allocated to create a view of memory for vmemmap. diff --git a/net/core/dev.c b/net/core/dev.c index 35dfb8318483..89204e8c0e14 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6096,7 +6096,7 @@ static void __net_exit default_device_exit(struct net *net) static void __net_exit default_device_exit_batch(struct list_head *net_list) { /* At exit all network devices most be removed from a network - * namespace. Do this in the reverse order of registeration. + * namespace. Do this in the reverse order of registration. * Do this across as many network namespaces as possible to * improve batching efficiency. */ diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c index 4c409b46aa35..9b73e0b03e34 100644 --- a/net/decnet/dn_dev.c +++ b/net/decnet/dn_dev.c @@ -1112,7 +1112,7 @@ static struct dn_dev *dn_dev_create(struct net_device *dev, int *err) /* * This processes a device up event. We only start up * the loopback device & ethernet devices with correct - * MAC addreses automatically. Others must be started + * MAC addresses automatically. Others must be started * specifically. * * FIXME: How should we configure the loopback address ? If we could dispense diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 05b1ecf36763..e96152207164 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1336,7 +1336,7 @@ static inline unsigned int tcp_cwnd_test(struct tcp_sock *tp, return 0; } -/* Intialize TSO state of a skb. +/* Initialize TSO state of a skb. * This must be invoked the first time we consider transmitting * SKB onto the wire. */ diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 9df80114b47b..c06f1503aa8b 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -946,7 +946,7 @@ static void randomize_choice_values(struct symbol *csym) int cnt, def; /* - * If choice is mod then we may have more items slected + * If choice is mod then we may have more items selected * and if no then no-one. * In both cases stop. */ diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 33122ca04e7c..6619ed8843f9 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1614,7 +1614,7 @@ static void section_rel(const char *modname, struct elf_info *elf, * A module includes a number of sections that are discarded * either when loaded or when used as built-in. * For loaded modules all functions marked __init and all data - * marked __initdata will be discarded when the module has been intialized. + * marked __initdata will be discarded when the module has been initialized. * Likewise for modules used built-in the sections marked __exit * are discarded because __exit marked function are supposed to be called * only when a module is unloaded which never happens for built-in modules. diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h index 734a6d35112c..e00c3c7c96be 100644 --- a/security/apparmor/include/match.h +++ b/security/apparmor/include/match.h @@ -27,7 +27,7 @@ * The format used for transition tables is based on the GNU flex table * file format (--tables-file option; see Table File Format in the flex * info pages and the flex sources for documentation). The magic number - * used in the header is 0x1B5E783D insted of 0xF13C57B1 though, because + * used in the header is 0x1B5E783D instead of 0xF13C57B1 though, because * the YY_ID_CHK (check) and YY_ID_DEF (default) tables are used * slightly differently (see the apparmor-parser package). */ diff --git a/sound/core/init.c b/sound/core/init.c index 57b792e2439a..3e65da21a08c 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -642,7 +642,7 @@ static struct device_attribute card_number_attrs = * external accesses. Thus, you should call this function at the end * of the initialization of the card. * - * Returns zero otherwise a negative error code if the registrain failed. + * Returns zero otherwise a negative error code if the registration failed. */ int snd_card_register(struct snd_card *card) { diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 8bc7cb3db330..8e022fc70f55 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -985,7 +985,7 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push) if (push) snd_pcm_update_hw_ptr(substream); /* The jiffies check in snd_pcm_update_hw_ptr*() is done by - * a delta betwen the current jiffies, this gives a large enough + * a delta between the current jiffies, this gives a large enough * delta, effectively to skip the check once. */ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000; diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 265abcce9dba..9b915e27b5bd 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -264,7 +264,7 @@ static int __devinit snd_opl3sa2_detect(struct snd_card *card) snd_printd("OPL3-SA [0x%lx] detect (1) = 0x%x (0x%x)\n", port, tmp, tmp1); return -ENODEV; } - /* try if the MIC register is accesible */ + /* try if the MIC register is accessible */ tmp = snd_opl3sa2_read(chip, OPL3SA2_MIC); snd_opl3sa2_write(chip, OPL3SA2_MIC, 0x8a); if (((tmp1 = snd_opl3sa2_read(chip, OPL3SA2_MIC)) & 0x9f) != 0x8a) { diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h index f19c11077255..fc53b9bca26d 100644 --- a/sound/pci/ca0106/ca0106.h +++ b/sound/pci/ca0106/ca0106.h @@ -188,7 +188,7 @@ #define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ /* PTR[5:0], Default: 0x0 */ #define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */ -#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */ +#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */ /* DMA[31:0], Default: 0x0 */ #define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */ /* SIZE[31:16], Default: 0x0 */ diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index df47f738098d..0c701e4ec8a5 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard."); */ #define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */ #define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ -#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */ +#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */ #define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size */ #define PLAYBACK_POINTER 0x06 /* Playback period pointer. Sample currently in DAC */ #define PLAYBACK_UNKNOWN1 0x07 diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h index 153214940336..00f4817533b1 100644 --- a/sound/pci/emu10k1/p16v.h +++ b/sound/pci/emu10k1/p16v.h @@ -96,7 +96,7 @@ #define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */ #define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ #define PLAYBACK_UNKNOWN3 0x03 /* Not used */ -#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */ +#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */ #define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */ #define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */ #define PLAYBACK_FIFO_END_ADDRESS 0x07 /* Playback FIFO end address */ diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index 23a58f0d6cb9..7c17f45d876d 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick."); #define RINGB_EN_2CODEC 0x0020 #define RINGB_SING_BIT_DUAL 0x0040 -/* ****Port Adresses**** */ +/* ****Port Addresses**** */ /* Write & Read */ #define ESM_INDEX 0x02 diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 0c98ef9156d8..f5eadfc0672a 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -487,7 +487,7 @@ struct hdspm { struct snd_kcontrol *playback_mixer_ctls[HDSPM_MAX_CHANNELS]; /* but input to much, so not used */ struct snd_kcontrol *input_mixer_ctls[HDSPM_MAX_CHANNELS]; - /* full mixer accessable over mixer ioctl or hwdep-device */ + /* full mixer accessible over mixer ioctl or hwdep-device */ struct hdspm_mixer *mixer; }; @@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n) return bit2freq_tab[n]; } -/* Write/read to/from HDSPM with Adresses in Bytes +/* Write/read to/from HDSPM with Addresses in Bytes not words but only 32Bit writes are allowed */ static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg, @@ -2908,7 +2908,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm /* Channel playback mixer as default control Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, - thats too * big for any alsamixer they are accesible via special + thats too * big for any alsamixer they are accessible via special IOCTL on hwdep and the mixer 2dimensional mixer control */ diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index bc22ee93a75d..43316a70be05 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -1953,7 +1953,7 @@ static int max98088_probe(struct snd_soc_codec *codec) return ret; } - /* initalize private data */ + /* initialize private data */ max98088->sysclk = (unsigned)-1; max98088->eq_textcnt = 0; diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c index f31d22ad7c88..11c88b13dd2e 100644 --- a/sound/soc/s3c24xx/smdk_spdif.c +++ b/sound/soc/s3c24xx/smdk_spdif.c @@ -61,7 +61,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev) goto out3; } - /* Set audio clock heirachy for S/PDIF */ + /* Set audio clock hierarchy for S/PDIF */ clk_set_parent(mout_epll, fout_epll); clk_set_parent(sclk_audio0, mout_epll); clk_set_parent(sclk_spdif, sclk_audio0); @@ -79,7 +79,7 @@ out1: /* We should haved to set clock directly on this part because of clock * scheme of Samsudng SoCs did not support to set rates from abstrct - * clock of it's heirachy. + * clock of it's hierarchy. */ static int set_audio_clock_rate(unsigned long epll_rate, unsigned long audio_rate) @@ -197,7 +197,7 @@ static int __init smdk_init(void) if (ret) goto err1; - /* Set audio clock heirachy manually */ + /* Set audio clock hierarchy manually */ ret = set_audio_clock_heirachy(smdk_snd_spdif_device); if (ret) goto err1; |