diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-18 15:54:05 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-18 15:54:05 -0700 |
| commit | bbd60bffaf780464298cb7a39852f7f1065f1726 (patch) | |
| tree | 1338cf7dd93214382127a53b88969e870fbb837a | |
| parent | pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function (diff) | |
| parent | mmc: core: improve reasonableness of bus width setting for HS400es (diff) | |
| download | linux-dev-bbd60bffaf780464298cb7a39852f7f1065f1726.tar.xz linux-dev-bbd60bffaf780464298cb7a39852f7f1065f1726.zip | |
Merge tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"Updates for MMC for v4.19.
MMC core:
- Add some fine-grained hooks to further support HS400 tuning
- Improve error path for bus width setting for HS400es
- Use a common method when checking R1 status
MMC host:
- renesas_sdhi: Add r8a77990 support
- renesas_sdhi: Add eMMC HS400 mode support
- tmio/renesas_sdhi: Improve tuning/clock management
- tmio: Add eMMC HS400 mode support
- sunxi: Add support for 3.3V eMMC DDR mode
- mmci: Initial support to manage variant specific callbacks
- sdhci: Don't try 3.3V I/O voltage if not supported
- sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
- sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
- sdhci-msm: Add support for new version sdcc V5
- sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
- sdhci-pci-o2micro: Add support for O2 hardware tuning
- sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
- sdhci-pci: Add support for Intel ICP
- sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
- sdhci-tegra: Fix eMMC DDR52 mode
- sdhci-tegra: Improve clock management
- dw_mmc-rockchip: Document compatible string for px30
- sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
- sdhci-of-esdhc: Set proper DMA mask for ls104x chips
- sdhci-of-esdhc: Improve clock management
- sdhci-of-arasan: Add a quirk to manage unstable clocks
- dw_mmc-exynos: Address potential external abort during system resume
- pxamci: Add support for common MMC DT bindings
- pxamci: Several cleanups and improvements
- pxamci: Merge immutable branch for pxa to switch to DMA slave maps"
* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
mmc: core: improve reasonableness of bus width setting for HS400es
mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
mmc: renesas_sdhi: Fix sampling clock position selecting
mmc: tmio: Fix tuning flow
mmc: sunxi: remove output of virtual base address
dt-bindings: mmc: rockchip-dw-mshc: add description for px30
mmc: renesas_sdhi: Add r8a77990 support
mmc: sunxi: allow 3.3V DDR when DDR is available
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
mmc: mmci: Initial support to manage variant specific callbacks
mmc: tegra: Force correct divider calculation on DDR50/52
mmc: sdhci: Add MSI interrupt support for O2 SD host
mmc: sdhci: Add support for O2 hardware tuning
mmc: sdhci: Export sdhci tuning function symbol
mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
mmc: sdhci: Add support for O2 eMMC HS200 mode
mmc: tegra: Add and use tegra_sdhci_get_max_clock()
mmc: sdhci-esdhc-imx: fix indent
mmc: sdhci-esdhc-imx: disable clocks before changing frequency
mmc: tegra: prevent ACMD23 on Tegra 3
...
43 files changed, 1373 insertions, 494 deletions
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 5f3c02522c17..f6ddba31cb73 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -37,6 +37,8 @@ Optional Properties: - xlnx,fails-without-test-cd: when present, the controller doesn't work when the CD line is not connected properly, and the line is not connected properly. Test mode can be used to force the controller to function. + - xlnx,int-clock-stable-broken: when present, the controller always reports + that the internal clock is stable even when it is not. Example: sdhci@e0100000 { diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt index b7025de7dced..5f5c2bec2b8c 100644 --- a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -8,10 +8,9 @@ Required properties: Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. -- marvell,gpio-power: GPIO spec for the card power enable pin -This file documents differences between the core properties in mmc.txt -and the properties used by the pxa-mmc driver. +In addition to the properties described in this docuent, the details +described in mmc.txt are supported. Examples: @@ -19,6 +18,7 @@ mmc0: mmc@41100000 { compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; + vmmc-supply = <&mmc_regulator>; cd-gpios = <&gpio 23 0>; wp-gpios = <&gpio 24 0>; }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 8ce49b255974..6f629b12bd69 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -14,6 +14,7 @@ Required Properties: before RK3288 - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 + - "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index bfdcdc4ccdff..502b3b851ebb 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -4,7 +4,12 @@ This file documents differences between the core properties in mmc.txt and the properties used by the sdhci-msm driver. Required properties: -- compatible: Should contain "qcom,sdhci-msm-v4". +- compatible: Should contain: + "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 + "qcom,sdhci-msm-v5" for sdcc versions >= 5.0 + For SDCC version 5.0.0, MCI registers are removed from SDCC + interface and some registers are moved to HC. New compatible + string is added to support this change - "qcom,sdhci-msm-v5". - reg: Base address and length of the register in the following order: - Host controller register map (required) - SD Core register map (required) diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt new file mode 100644 index 000000000000..ee4253b33be2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt @@ -0,0 +1,20 @@ +* Synopsys DesignWare Cores Mobile Storage Host Controller + +Required properties: +- compatible: should be one of the following: + "snps,dwcmshc-sdhci" +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: Array of clocks required for SDHCI; requires at least one for + core clock. +- clock-names: Array of names corresponding to clocks property; shall be + "core" for core clock and "bus" for optional bus clock. + +Example: + sdhci2: sdhci@aa0000 { + compatible = "snps,dwcmshc-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmcclk>; + bus-width = <8>; + } diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 839f469f4525..c434200d19d5 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -28,6 +28,7 @@ Required properties: "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC "renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC + "renesas,sdhi-r8a77990" - SDHI IP on R8A77990 SoC "renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller diff --git a/MAINTAINERS b/MAINTAINERS index d09d133a6fc1..42caef5c808d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12916,6 +12916,13 @@ S: Maintained F: drivers/mmc/host/sdhci* F: include/linux/mmc/sdhci* +SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER +M: Prabu Thangamuthu <prabu.t@synopsys.com> +M: Manjunath M B <manjumb@synopsys.com> +L: linux-mmc@vger.kernel.org +S: Maintained +F: drivers/mmc/host/sdhci-pci-dwc-mshc.c + SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER M: Ben Dooks <ben-linux@fluff.org> M: Jaehoon Chung <jh80.chung@samsung.com> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 281826d1fcca..50a5c340307b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2078,7 +2078,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; /* Do not retry else we can't see errors */ err = mmc_wait_for_cmd(card->host, &cmd, 0); - if (err || (cmd.resp[0] & 0xFDF92000)) { + if (err || R1_STATUS(cmd.resp[0])) { pr_err("error %d requesting status %#x\n", err, cmd.resp[0]); err = -EIO; @@ -2716,52 +2716,6 @@ void mmc_stop_host(struct mmc_host *host) mmc_release_host(host); } -int mmc_power_save_host(struct mmc_host *host) -{ - int ret = 0; - - pr_debug("%s: %s: powering down\n", mmc_hostname(host), __func__); - - mmc_bus_get(host); - - if (!host->bus_ops || host->bus_dead) { - mmc_bus_put(host); - return -EINVAL; - } - - if (host->bus_ops->power_save) - ret = host->bus_ops->power_save(host); - - mmc_bus_put(host); - - mmc_power_off(host); - - return ret; -} -EXPORT_SYMBOL(mmc_power_save_host); - -int mmc_power_restore_host(struct mmc_host *host) -{ - int ret; - - pr_debug("%s: %s: powering up\n", mmc_hostname(host), __func__); - - mmc_bus_get(host); - - if (!host->bus_ops || host->bus_dead) { - mmc_bus_put(host); - return -EINVAL; - } - - mmc_power_up(host, host->card->ocr); - ret = host->bus_ops->power_restore(host); - - mmc_bus_put(host); - - return ret; -} -EXPORT_SYMBOL(mmc_power_restore_host); - #ifdef CONFIG_PM_SLEEP /* Do the card removal on suspend if card is assumed removeable * Do that in pm notifier while userspace isn't yet frozen, so we will be able diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 9d8f09ac0821..087ba68b2920 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -28,8 +28,6 @@ struct mmc_bus_ops { int (*resume)(struct mmc_host *); int (*runtime_suspend)(struct mmc_host *); int (*runtime_resume)(struct mmc_host *); - int (*power_save)(struct mmc_host *); - int (*power_restore)(struct mmc_host *); int (*alive)(struct mmc_host *); int (*shutdown)(struct mmc_host *); int (*hw_reset)(struct mmc_host *); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 4466f5de54d4..bc1bd2c25613 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1169,6 +1169,10 @@ static int mmc_select_hs400(struct mmc_card *card) /* Set host controller to HS timing */ mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + /* Prepare host to downgrade to HS timing */ + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + /* Reduce frequency to HS frequency */ max_dtr = card->ext_csd.hs_max_dtr; mmc_set_clock(host, max_dtr); @@ -1209,6 +1213,9 @@ static int mmc_select_hs400(struct mmc_card *card) if (err) goto out_err; + if (host->ops->hs400_complete) + host->ops->hs400_complete(host); + return 0; out_err: @@ -1256,6 +1263,9 @@ int mmc_hs400_to_hs200(struct mmc_card *card) mmc_set_timing(host, MMC_TIMING_MMC_HS); + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + err = mmc_switch_status(card); if (err) goto out_err; @@ -1338,8 +1348,12 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; err = mmc_select_bus_width(card); - if (err < 0) + if (err != MMC_BUS_WIDTH_8) { + pr_err("%s: switch to 8bit bus width failed, err:%d\n", + mmc_hostname(host), err); + err = err < 0 ? err : -ENOTSUPP; goto out_err; + } /* Switch card to HS mode */ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 42d6aa89a48a..873b2aa0c155 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -417,7 +417,7 @@ static int mmc_switch_status_error(struct mmc_host *host, u32 status) if (status & R1_SPI_ILLEGAL_COMMAND) return -EBADMSG; } else { - if (status & 0xFDFFA000) + if (R1_STATUS(status)) pr_warn("%s: unexpected status %#x after switch\n", mmc_hostname(host), status); if (status & R1_SWITCH_ERROR) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index a86490dbca70..d8e17ea6126d 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -1076,7 +1076,6 @@ static const struct mmc_bus_ops mmc_sdio_ops = { .resume = mmc_sdio_resume, .runtime_suspend = mmc_sdio_runtime_suspend, .runtime_resume = mmc_sdio_runtime_resume, - .power_restore = mmc_sdio_power_restore, .alive = mmc_sdio_alive, .hw_reset = mmc_sdio_hw_reset, .sw_reset = mmc_sdio_sw_reset, diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 0581c199c996..694d0828215d 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -176,6 +176,17 @@ config MMC_SDHCI_OF_HLWD If unsure, say N. +config MMC_SDHCI_OF_DWCMSHC + tristate "SDHCI OF support for the Synopsys DWC MSHC" + depends on MMC_SDHCI_PLTFM + depends on OF + depends on COMMON_CLK + help + This selects Synopsys DesignWare Cores Mobile Storage Controller + support. + If you have a controller with this interface, say Y or M here. + If unsure, say N. + config MMC_SDHCI_CADENCE tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" depends on MMC_SDHCI_PLTFM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 85dc1322c3de..ce8398e6f2c0 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o -sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o +sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \ + sdhci-pci-dwc-mshc.o obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o @@ -82,6 +83,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o +obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index a84aa3f1ae85..ab47b018716a 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -175,6 +175,20 @@ static int dw_mci_exynos_runtime_resume(struct device *dev) return ret; } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_SLEEP +/** + * dw_mci_exynos_suspend_noirq - Exynos-specific suspend code + * + * This ensures that device will be in runtime active state in + * dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume() + */ +static int dw_mci_exynos_suspend_noirq(struct device *dev) +{ + pm_runtime_get_noresume(dev); + return pm_runtime_force_suspend(dev); +} /** * dw_mci_exynos_resume_noirq - Exynos-specific resume code @@ -186,12 +200,16 @@ static int dw_mci_exynos_runtime_resume(struct device *dev) * * We run this code on all exynos variants because it doesn't hurt. */ - static int dw_mci_exynos_resume_noirq(struct device *dev) { struct dw_mci *host = dev_get_drvdata(dev); struct dw_mci_exynos_priv_data *priv = host->priv; u32 clksel; + int ret; + + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) @@ -207,11 +225,11 @@ static int dw_mci_exynos_resume_noirq(struct device *dev) mci_writel(host, CLKSEL, clksel); } + pm_runtime_put(dev); + return 0; } -#else -#define dw_mci_exynos_resume_noirq NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing) { @@ -553,14 +571,11 @@ static int dw_mci_exynos_remove(struct platform_device *pdev) } static const struct dev_pm_ops dw_mci_exynos_pmops = { - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, - pm_runtime_force_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend_noirq, + dw_mci_exynos_resume_noirq) SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, dw_mci_exynos_runtime_resume, NULL) - .resume_noirq = dw_mci_exynos_resume_noirq, - .thaw_noirq = dw_mci_exynos_resume_noirq, - .restore_noirq = dw_mci_exynos_resume_noirq, }; static struct platform_driver dw_mci_exynos_pltfm_driver = { diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f1849775e47e..1841d250e9e2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -48,78 +48,6 @@ static unsigned int fmax = 515633; -/** - * struct variant_data - MMCI variant-specific quirks - * @clkreg: default value for MCICLOCK register - * @clkreg_enable: enable value for MMCICLOCK register - * @clkreg_8bit_bus_enable: enable value for 8 bit bus - * @clkreg_neg_edge_enable: enable value for inverted data/cmd output - * @datalength_bits: number of bits in the MMCIDATALENGTH register - * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY - * is asserted (likewise for RX) - * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY - * is asserted (likewise for RX) - * @data_cmd_enable: enable value for data commands. - * @st_sdio: enable ST specific SDIO logic - * @st_clkdiv: true if using a ST-specific clock divider algorithm - * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. - * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register - * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl - * register - * @datactrl_mask_sdio: SDIO enable mask in datactrl register - * @pwrreg_powerup: power up value for MMCIPOWER register - * @f_max: maximum clk frequency supported by the controller. - * @signal_direction: input/out direction of bus signals can be indicated - * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock - * @busy_detect: true if the variant supports busy detection on DAT0. - * @busy_dpsm_flag: bitmask enabling busy detection in the DPSM - * @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register - * indicating that the card is busy - * @busy_detect_mask: bitmask identifying the bit in the MMCIMASK0 to mask for - * getting busy end detection interrupts - * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply - * @explicit_mclk_control: enable explicit mclk control in driver. - * @qcom_fifo: enables qcom specific fifo pio read logic. - * @qcom_dml: enables qcom specific dma glue for dma transfers. - * @reversed_irq_handling: handle data irq before cmd irq. - * @mmcimask1: true if variant have a MMCIMASK1 register. - * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS - * register. - * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register - */ -struct variant_data { - unsigned int clkreg; - unsigned int clkreg_enable; - unsigned int clkreg_8bit_bus_enable; - unsigned int clkreg_neg_edge_enable; - unsigned int datalength_bits; - unsigned int fifosize; - unsigned int fifohalfsize; - unsigned int data_cmd_enable; - unsigned int datactrl_mask_ddrmode; - unsigned int datactrl_mask_sdio; - bool st_sdio; - bool st_clkdiv; - bool blksz_datactrl16; - bool blksz_datactrl4; - u32 pwrreg_powerup; - u32 f_max; - bool signal_direction; - bool pwrreg_clkgate; - bool busy_detect; - u32 busy_dpsm_flag; - u32 busy_detect_flag; - u32 busy_detect_mask; - bool pwrreg_nopower; - bool explicit_mclk_control; - bool qcom_fifo; - bool qcom_dml; - bool reversed_irq_handling; - bool mmcimask1; - u32 start_err; - u32 opendrain; -}; - static struct variant_data variant_arm = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, @@ -280,6 +208,7 @@ static struct variant_data variant_qcom = { .mmcimask1 = true, .start_err = MCI_STARTBITERR, .opendrain = MCI_ROD, + .init = qcom_variant_init, }; /* Busy detection for the ST Micro variant */ @@ -489,7 +418,6 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) static void mmci_dma_setup(struct mmci_host *host) { const char *rxname, *txname; - struct variant_data *variant = host->variant; host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); @@ -537,9 +465,8 @@ static void mmci_dma_setup(struct mmci_host *host) host->mmc->max_seg_size = max_seg_size; } - if (variant->qcom_dml && host->dma_rx_channel && host->dma_tx_channel) - if (dml_hw_init(host, host->mmc->parent->of_node)) - variant->qcom_dml = false; + if (host->ops && host->ops->dma_setup) + host->ops->dma_setup(host); } /* @@ -1706,6 +1633,9 @@ static int mmci_probe(struct amba_device *dev, goto clk_disable; } + if (variant->init) + variant->init(host); + /* * The ARM and ST versions of the block have slightly different * clock divider equations which means that the minimum divider diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index f91cdf7f6dae..517591d219e9 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -195,8 +195,86 @@ #define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain" struct clk; -struct variant_data; struct dma_chan; +struct mmci_host; + +/** + * struct variant_data - MMCI variant-specific quirks + * @clkreg: default value for MCICLOCK register + * @clkreg_enable: enable value for MMCICLOCK register + * @clkreg_8bit_bus_enable: enable value for 8 bit bus + * @clkreg_neg_edge_enable: enable value for inverted data/cmd output + * @datalength_bits: number of bits in the MMCIDATALENGTH register + * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY + * is asserted (likewise for RX) + * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY + * is asserted (likewise for RX) + * @data_cmd_enable: enable value for data commands. + * @st_sdio: enable ST specific SDIO logic + * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register + * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl + * register + * @datactrl_mask_sdio: SDIO enable mask in datactrl register + * @pwrreg_powerup: power up value for MMCIPOWER register + * @f_max: maximum clk frequency supported by the controller. + * @signal_direction: input/out direction of bus signals can be indicated + * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock + * @busy_detect: true if the variant supports busy detection on DAT0. + * @busy_dpsm_flag: bitmask enabling busy detection in the DPSM + * @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register + * indicating that the card is busy + * @busy_detect_mask: bitmask identifying the bit in the MMCIMASK0 to mask for + * getting busy end detection interrupts + * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply + * @explicit_mclk_control: enable explicit mclk control in driver. + * @qcom_fifo: enables qcom specific fifo pio read logic. + * @qcom_dml: enables qcom specific dma glue for dma transfers. + * @reversed_irq_handling: handle data irq before cmd irq. + * @mmcimask1: true if variant have a MMCIMASK1 register. + * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS + * register. + * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register + */ +struct variant_data { + unsigned int clkreg; + unsigned int clkreg_enable; + unsigned int clkreg_8bit_bus_enable; + unsigned int clkreg_neg_edge_enable; + unsigned int datalength_bits; + unsigned int fifosize; + unsigned int fifohalfsize; + unsigned int data_cmd_enable; + unsigned int datactrl_mask_ddrmode; + unsigned int datactrl_mask_sdio; + bool st_sdio; + bool st_clkdiv; + bool blksz_datactrl16; + bool blksz_datactrl4; + u32 pwrreg_powerup; + u32 f_max; + bool signal_direction; + bool pwrreg_clkgate; + bool busy_detect; + u32 busy_dpsm_flag; + u32 busy_detect_flag; + u32 busy_detect_mask; + bool pwrreg_nopower; + bool explicit_mclk_control; + bool qcom_fifo; + bool qcom_dml; + bool reversed_irq_handling; + bool mmcimask1; + u32 start_err; + u32 opendrain; + void (*init)(struct mmci_host *host); +}; + +/* mmci variant callbacks */ +struct mmci_host_ops { + void (*dma_setup)(struct mmci_host *host); +}; struct mmci_host_next { struct dma_async_tx_descriptor *dma_desc; @@ -228,6 +306,7 @@ struct mmci_host { u32 mask1_reg; bool vqmmc_enabled; struct mmci_platform_data *plat; + struct mmci_host_ops *ops; struct variant_data *variant; struct pinctrl *pinctrl; struct pinctrl_state *pins_default; diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c index 00750c9d3514..be3fab5db83f 100644 --- a/drivers/mmc/host/mmci_qcom_dml.c +++ b/drivers/mmc/host/mmci_qcom_dml.c @@ -119,17 +119,20 @@ static int of_get_dml_pipe_index(struct device_node *np, const char *name) } /* Initialize the dml hardware connected to SD Card controller */ -int dml_hw_init(struct mmci_host *host, struct device_node *np) +static void qcom_dma_setup(struct mmci_host *host) { u32 config; void __iomem *base; int consumer_id, producer_id; + struct device_node *np = host->mmc->parent->of_node; consumer_id = of_get_dml_pipe_index(np, "tx"); producer_id = of_get_dml_pipe_index(np, "rx"); - if (producer_id < 0 || consumer_id < 0) - return -ENODEV; + if (producer_id < 0 || consumer_id < 0) { + host->variant->qcom_dml = false; + return; + } base = host->base + DML_OFFSET; @@ -172,6 +175,13 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np) /* Make sure dml initialization is finished */ mb(); +} - return 0; +static struct mmci_host_ops qcom_variant_ops = { + .dma_setup = qcom_dma_setup, +}; + +void qcom_variant_init(struct mmci_host *host) +{ + host->ops = &qcom_variant_ops; } diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h index 6e405d09d534..fa16f6f4d4ad 100644 --- a/drivers/mmc/host/mmci_qcom_dml.h +++ b/drivers/mmc/host/mmci_qcom_dml.h @@ -16,12 +16,11 @@ #define __MMC_QCOM_DML_H__ #ifdef CONFIG_MMC_QCOM_DML -int dml_hw_init(struct mmci_host *host, struct device_node *np); +void qcom_variant_init(struct mmci_host *host); void dml_start_xfer(struct mmci_host *host, struct mmc_data *data); #else -static inline int dml_hw_init(struct mmci_host *host, struct device_node *np) +static inline void qcom_variant_init(struct mmci_host *host) { - return -ENOSYS; } static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) { diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 6c94474e36f4..f7ffbf1676b1 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -58,11 +58,11 @@ struct pxamci_host { void __iomem *base; struct clk *clk; unsigned long clkrate; - int irq; unsigned int clkrt; unsigned int cmdat; unsigned int imask; unsigned int power_mode; + unsigned long detect_delay_ms; struct pxamci_platform_data *pdata; struct mmc_request *mrq; @@ -72,64 +72,48 @@ struct pxamci_host { struct dma_chan *dma_chan_rx; struct dma_chan *dma_chan_tx; dma_cookie_t dma_cookie; - dma_addr_t sg_dma; unsigned int dma_len; - unsigned int dma_dir; - unsigned int dma_drcmrrx; - unsigned int dma_drcmrtx; - - struct regulator *vcc; }; -static inline void pxamci_init_ocr(struct pxamci_host *host) +static int pxamci_init_ocr(struct pxamci_host *host) { -#ifdef CONFIG_REGULATOR - host->vcc = devm_regulator_get_optional(mmc_dev(host->mmc), "vmmc"); - - if (IS_ERR(host->vcc)) - host->vcc = NULL; - else { - host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc); - if (host->pdata && host->pdata->ocr_mask) - dev_warn(mmc_dev(host->mmc), - "ocr_mask/setpower will not be used\n"); - } -#endif - if (host->vcc == NULL) { + struct mmc_host *mmc = host->mmc; + int ret; + + ret = mmc_regulator_get_supply(mmc); + if (ret < 0) + return ret; + + if (IS_ERR(mmc->supply.vmmc)) { /* fall-back to platform data */ - host->mmc->ocr_avail = host->pdata ? + mmc->ocr_avail = host->pdata ? host->pdata->ocr_mask : MMC_VDD_32_33 | MMC_VDD_33_34; } + + return 0; } static inline int pxamci_set_power(struct pxamci_host *host, unsigned char power_mode, unsigned int vdd) { + struct mmc_host *mmc = host->mmc; + struct regulator *supply = mmc->supply.vmmc; int on; - if (host->vcc) { - int ret; + if (!IS_ERR(supply)) + return mmc_regulator_set_ocr(mmc, supply, vdd); - if (power_mode == MMC_POWER_UP) { - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); - if (ret) - return ret; - } else if (power_mode == MMC_POWER_OFF) { - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); - if (ret) - return ret; - } - } - if (!host->vcc && host->pdata && + if (host->pdata && gpio_is_valid(host->pdata->gpio_power)) { on = ((1 << vdd) & host->pdata->ocr_mask); gpio_set_value(host->pdata->gpio_power, !!on ^ host->pdata->gpio_power_invert); } - if (!host->vcc && host->pdata && host->pdata->setpower) + + if (host->pdata && host->pdata->setpower) return host->pdata->setpower(mmc_dev(host->mmc), vdd); return 0; @@ -584,7 +568,7 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid) { struct pxamci_host *host = mmc_priv(devid); - mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms)); + mmc_detect_change(devid, msecs_to_jiffies(host->detect_delay_ms)); return IRQ_HANDLED; } @@ -596,37 +580,30 @@ static const struct of_device_id pxa_mmc_dt_ids[] = { MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids); -static int pxamci_of_init(struct platform_device *pdev) +static int pxamci_of_init(struct platform_device *pdev, + struct mmc_host *mmc) { - struct device_node *np = pdev->dev.of_node; - struct pxamci_platform_data *pdata; - u32 tmp; - - if (!np) - return 0; - - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; + struct device_node *np = pdev->dev.of_node; + struct pxamci_host *host = mmc_priv(mmc); + u32 tmp; + int ret; - pdata->gpio_card_detect = - of_get_named_gpio(np, "cd-gpios", 0); - pdata->gpio_card_ro = - of_get_named_gpio(np, "wp-gpios", 0); + if (!np) + return 0; /* pxa-mmc specific */ - pdata->gpio_power = - of_get_named_gpio(np, "pxa-mmc,gpio-power", 0); - if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0) - pdata->detect_delay_ms = tmp; + host->detect_delay_ms = tmp; - pdev->dev.platform_data = pdata; + ret = mmc_of_parse(mmc); + if (ret < 0) + return ret; - return 0; + return 0; } #else -static int pxamci_of_init(struct platform_device *pdev) +static int pxamci_of_init(struct platform_device *pdev, + struct mmc_host *mmc) { return 0; } @@ -636,19 +613,16 @@ static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct pxamci_host *host = NULL; + struct device *dev = &pdev->dev; struct resource *r; - int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1; - - ret = pxamci_of_init(pdev); - if (ret) - return ret; + int ret, irq; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; - mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev); if (!mmc) { ret = -ENOMEM; goto out; @@ -677,12 +651,16 @@ static int pxamci_probe(struct platform_device *pdev) */ mmc->max_blk_count = 65535; + ret = pxamci_of_init(pdev, mmc); + if (ret) + return ret; + host = mmc_priv(mmc); host->mmc = mmc; host->pdata = pdev->dev.platform_data; host->clkrt = CLKRT_OFF; - host->clk = devm_clk_get(&pdev->dev, NULL); + host->clk = devm_clk_get(dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; @@ -697,7 +675,9 @@ static int pxamci_probe(struct platform_device *pdev) mmc->f_min = (host->clkrate + 63) / 64; mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate; - pxamci_init_ocr(host); + ret = pxamci_init_ocr(host); + if (ret < 0) + return ret; mmc->caps = 0; host->cmdat = 0; @@ -711,10 +691,9 @@ static int pxamci_probe(struct platform_device *pdev) spin_lock_init(&host->lock); host->res = r; - host->irq = irq; host->imask = MMC_I_MASK_ALL; - host->base = devm_ioremap_resource(&pdev->dev, r); + host->base = devm_ioremap_resource(dev, r); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto out; @@ -729,69 +708,76 @@ static int pxamci_probe(struct platform_device *pdev) writel(64, host->base + MMC_RESTO); writel(host->imask, host->base + MMC_I_MASK); - ret = devm_request_irq(&pdev->dev, host->irq, pxamci_irq, 0, + ret = devm_request_irq(dev, irq, pxamci_irq, 0, DRIVER_NAME, host); if (ret) goto out; platform_set_drvdata(pdev, mmc); - host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx"); + host->dma_chan_rx = dma_request_slave_channel(dev, "rx"); if (host->dma_chan_rx == NULL) { - dev_err(&pdev->dev, "unable to request rx dma channel\n"); + dev_err(dev, "unable to request rx dma channel\n"); ret = -ENODEV; goto out; } - host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx"); + host->dma_chan_tx = dma_request_slave_channel(dev, "tx"); if (host->dma_chan_tx == NULL) { - dev_err(&pdev->dev, "unable to request tx dma channel\n"); + dev_err(dev, "unable to request tx dma channel\n"); ret = -ENODEV; goto out; } if (host->pdata) { - gpio_cd = host->pdata->gpio_card_detect; - gpio_ro = host->pdata->gpio_card_ro; - gpio_power = host->pdata->gpio_power; - } - if (gpio_is_valid(gpio_power)) { - ret = devm_gpio_request(&pdev->dev, gpio_power, - "mmc card power"); - if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", - gpio_power); - goto out; + int gpio_cd = host->pdata->gpio_card_detect; + int gpio_ro = host->pdata->gpio_card_ro; + int gpio_power = host->pdata->gpio_power; + + host->detect_delay_ms = host->pdata->detect_delay_ms; + + if (gpio_is_valid(gpio_power)) { + ret = devm_gpio_request(dev, gpio_power, + "mmc card power"); + if (ret) { + dev_err(dev, + "Failed requesting gpio_power %d\n", + gpio_power); + goto out; + } + gpio_direction_output(gpio_power, + host->pdata->gpio_power_invert); } - gpio_direction_output(gpio_power, - host->pdata->gpio_power_invert); - } - if (gpio_is_valid(gpio_ro)) { - ret = mmc_gpio_request_ro(mmc, gpio_ro); + + if (gpio_is_valid(gpio_ro)) { + ret = mmc_gpio_request_ro(mmc, gpio_ro); + if (ret) { + dev_err(dev, + "Failed requesting gpio_ro %d\n", + gpio_ro); + goto out; + } else { + mmc->caps2 |= host->pdata->gpio_card_ro_invert ? + 0 : MMC_CAP2_RO_ACTIVE_HIGH; + } + } + + if (gpio_is_valid(gpio_cd)) + ret = mmc_gpio_request_cd(mmc, gpio_cd, 0); if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", - gpio_ro); + dev_err(dev, "Failed requesting gpio_cd %d\n", + gpio_cd); goto out; - } else { - mmc->caps2 |= host->pdata->gpio_card_ro_invert ? - 0 : MMC_CAP2_RO_ACTIVE_HIGH; } - } - if (gpio_is_valid(gpio_cd)) - ret = mmc_gpio_request_cd(mmc, gpio_cd, 0); - if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd); - goto out; - } - - if (host->pdata && host->pdata->init) - host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); + if (host->pdata->init) + host->pdata->init(dev, pxamci_detect_irq, mmc); - if (gpio_is_valid(gpio_power) && host->pdata->setpower) - dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n"); - if (gpio_is_valid(gpio_ro) && host->pdata->get_ro) - dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n"); + if (gpio_is_valid(gpio_power) && host->pdata->setpower) + dev_warn(dev, "gpio_power and setpower() both defined\n"); + if (gpio_is_valid(gpio_ro) && host->pdata->get_ro) + dev_warn(dev, "gpio_ro and get_ro() both defined\n"); + } mmc_add_host(mmc); @@ -812,18 +798,12 @@ out: static int pxamci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - int gpio_cd = -1, gpio_ro = -1, gpio_power = -1; if (mmc) { struct pxamci_host *host = mmc_priv(mmc); mmc_remove_host(mmc); - if (host->pdata) { - gpio_cd = host->pdata->gpio_card_detect; - gpio_ro = host->pdata->gpio_card_ro; - gpio_power = host->pdata->gpio_power; - } if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); @@ -839,6 +819,7 @@ static int pxamci_remove(struct platform_device *pdev) mmc_free_host(mmc); } + return 0; } diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 45c015da2e75..777e32b0e410 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -212,6 +212,7 @@ static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, #define SH_MOBILE_SDHI_SCC_CKSEL 0x006 #define SH_MOBILE_SDHI_SCC_RVSCNTL 0x008 #define SH_MOBILE_SDHI_SCC_RVSREQ 0x00A +#define SH_MOBILE_SDHI_SCC_TMPPORT2 0x00E /* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */ #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN BIT(0) @@ -224,6 +225,9 @@ static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, #define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN BIT(0) /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */ #define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR BIT(2) +/* Definitions for values the SH_MOBILE_SDHI_SCC_TMPPORT2 register */ +#define SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL BIT(4) +#define SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN BIT(31) static inline u32 sd_scc_read32(struct tmio_mmc_host *host, struct renesas_sdhi *priv, int addr) @@ -244,33 +248,30 @@ static unsigned int renesas_sdhi_init_tuning(struct tmio_mmc_host *host) priv = host_to_priv(host); - /* set sampling clock selection range */ - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, - 0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); - /* Initialize SCC */ sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, 0x0); - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, - SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | - sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL)); - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + /* set sampling clock selection range */ + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, + SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | + 0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, SH_MOBILE_SDHI_SCC_CKSEL_DTSEL | sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + /* Read TAPNUM */ return (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL) >> SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) & @@ -286,13 +287,95 @@ static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host, sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap); } +static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host) +{ + struct renesas_sdhi *priv = host_to_priv(host); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + + /* Set HS400 mode */ + sd_ctrl_write16(host, CTL_SDIF_MODE, 0x0001 | + sd_ctrl_read16(host, CTL_SDIF_MODE)); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2, + (SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN | + SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) | + sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2)); + + /* Set the sampling clock selection range of HS400 mode */ + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, + SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | + 0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); + + + if (host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400) + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, + host->tap_set / 2); + + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, + SH_MOBILE_SDHI_SCC_CKSEL_DTSEL | + sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); +} + +static void renesas_sdhi_reset_scc(struct tmio_mmc_host *host, + struct renesas_sdhi *priv) +{ + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, + ~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL & + sd_scc_read32(host, priv, + SH_MOBILE_SDHI_SCC_CKSEL)); +} + +static void renesas_sdhi_disable_scc(struct tmio_mmc_host *host) +{ + struct renesas_sdhi *priv = host_to_priv(host); + + renesas_sdhi_reset_scc(host, priv); + + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, + ~SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN & + sd_scc_read32(host, priv, + SH_MOBILE_SDHI_SCC_DTCNTL)); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); +} + +static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host, + struct renesas_sdhi *priv) +{ + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + + /* Reset HS400 mode */ + sd_ctrl_write16(host, CTL_SDIF_MODE, ~0x0001 & + sd_ctrl_read16(host, CTL_SDIF_MODE)); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2, + ~(SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN | + SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) & + sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2)); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); +} + +static void renesas_sdhi_prepare_hs400_tuning(struct tmio_mmc_host *host) +{ + renesas_sdhi_reset_hs400_mode(host, host_to_priv(host)); +} + #define SH_MOBILE_SDHI_MAX_TAP 3 static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) { struct renesas_sdhi *priv = host_to_priv(host); unsigned long tap_cnt; /* counter of tuning success */ - unsigned long tap_set; /* tap position */ unsigned long tap_start;/* start position of tuning success */ unsigned long tap_end; /* end position of tuning success */ unsigned long ntap; /* temporary counter of tuning success */ @@ -302,6 +385,18 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); /* + * When tuning CMD19 is issued twice for each tap, merge the + * result requiring the tap to be good in both runs before + * considering it for tuning selection. + */ + for (i = 0; i < host->tap_num * 2; i++) { + int offset = host->tap_num * (i < host->tap_num ? 1 : -1); + + if (!test_bit(i, host->taps)) + clear_bit(i + offset, host->taps); + } + + /* * Find the longest consecutive run of successful probes. If that * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the * center index as the tap. @@ -330,12 +425,12 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) } if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP) - tap_set = (tap_start + tap_end) / 2 % host->tap_num; + host->tap_set = (tap_start + tap_end) / 2 % host->tap_num; else return -EIO; /* Set SCC */ - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap_set); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, host->tap_set); /* Enable auto re-tuning */ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, @@ -368,13 +463,8 @@ static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host) priv = host_to_priv(host); - /* Reset SCC */ - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, - ~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL & - sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); + renesas_sdhi_reset_scc(host, priv); + renesas_sdhi_reset_hs400_mode(host, priv); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); @@ -592,7 +682,8 @@ int renesas_sdhi_probe(struct platform_device *pdev, /* Enable tuning iff we have an SCC and a supported mode */ if (of_data && of_data->scc_offset && (host->mmc->caps & MMC_CAP_UHS_SDR104 || - host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) { + host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR | + MMC_CAP2_HS400_1_8V))) { const struct renesas_sdhi_scc *taps = of_data->taps; bool hit = false; @@ -616,6 +707,10 @@ int renesas_sdhi_probe(struct platform_device *pdev, host->select_tuning = renesas_sdhi_select_tuning; host->check_scc_error = renesas_sdhi_check_scc_error; host->hw_reset = renesas_sdhi_hw_reset; + host->prepare_hs400_tuning = + renesas_sdhi_prepare_hs400_tuning; + host->hs400_downgrade = renesas_sdhi_disable_scc; + host->hs400_complete = renesas_sdhi_hs400_complete; } i = 0; diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index d032bd63444d..35cc0de6be67 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -82,6 +82,22 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { }, }; +static const struct renesas_sdhi_of_data of_rcar_r8a7795_compatible = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL | + TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2 | + TMIO_MMC_HAVE_4TAP_HS400, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_CMD23, + .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT, + .bus_shift = 2, + .scc_offset = 0x1000, + .taps = rcar_gen3_scc_taps, + .taps_num = ARRAY_SIZE(rcar_gen3_scc_taps), + /* DMAC can handle 0xffffffff blk count but only 1 segment */ + .max_blk_count = 0xffffffff, + .max_segs = 1, +}; + static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL | TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2, @@ -98,8 +114,8 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { }; static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = { - { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, }, - { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, }, + { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_r8a7795_compatible, }, + { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_r8a7795_compatible, }, { .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, }, {}, }; diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c index 4bb46c489d71..890f192dedbd 100644 --- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c @@ -78,6 +78,19 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { }, }; +static const struct renesas_sdhi_of_data of_rcar_r8a7795_compatible = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL | + TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2 | + TMIO_MMC_HAVE_4TAP_HS400, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_CMD23, + .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT, + .bus_shift = 2, + .scc_offset = 0x1000, + .taps = rcar_gen3_scc_taps, + .taps_num = ARRAY_SIZE(rcar_gen3_scc_taps), +}; + static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL | TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2, @@ -104,8 +117,8 @@ static const struct of_device_id renesas_sdhi_sys_dmac_of_match[] = { { .compatible = "renesas,sdhi-r8a7792", .data = &of_rcar_gen2_compatible, }, { .compatible = "renesas,sdhi-r8a7793", .data = &of_rcar_gen2_compatible, }, { .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, }, - { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, }, - { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, }, + { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_r8a7795_compatible, }, + { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_r8a7795_compatible, }, { .compatible = "renesas,rcar-gen1-sdhi", .data = &of_rcar_gen1_compatible, }, { .compatible = "renesas,rcar-gen2-sdhi", .data = &of_rcar_gen2_compatible, }, { .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, }, diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4eb3d29ecde1..f44e49014a44 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Freescale eSDHC i.MX controller driver for the platform bus. * @@ -5,10 +6,6 @@ * * Copyright (c) 2010 Pengutronix e.K. * Author: Wolfram Sang <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. */ #include <linux/io.h> @@ -708,14 +705,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, int div = 1; u32 temp, val; + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + } + if (clock == 0) { host->mmc->actual_clock = 0; - - if (esdhc_is_usdhc(imx_data)) { - val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); - writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, - host->ioaddr + ESDHC_VENDOR_SPEC); - } return; } @@ -761,7 +758,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, if (esdhc_is_usdhc(imx_data)) { val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, - host->ioaddr + ESDHC_VENDOR_SPEC); + host->ioaddr + ESDHC_VENDOR_SPEC); } mdelay(1); @@ -1151,18 +1148,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, &boarddata->tuning_start_tap); if (of_find_property(np, "no-1-8-v", NULL)) - boarddata->support_vsel = false; - else - boarddata->support_vsel = true; + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) boarddata->delay_line = 0; mmc_of_parse_voltage(np, &host->ocr_mask); - /* sdr50 and sdr104 need work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && - !IS_ERR(imx_data->pins_default)) { + if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, @@ -1318,7 +1311,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (esdhc_is_usdhc(imx_data)) { host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; - host->mmc->caps |= MMC_CAP_1_8V_DDR; + host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200)) host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 646bf377ba77..3cc8bfee6c18 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -33,16 +33,11 @@ #define CORE_MCI_GENERICS 0x70 #define SWITCHABLE_SIGNALING_VOLTAGE BIT(29) -#define CORE_HC_MODE 0x78 #define HC_MODE_EN 0x1 #define CORE_POWER 0x0 #define CORE_SW_RST BIT(7) #define FF_CLK_SW_RST_DIS BIT(13) -#define CORE_PWRCTL_STATUS 0xdc -#define CORE_PWRCTL_MASK 0xe0 -#define CORE_PWRCTL_CLEAR 0xe4 -#define CORE_PWRCTL_CTL 0xe8 #define CORE_PWRCTL_BUS_OFF BIT(0) #define CORE_PWRCTL_BUS_ON BIT(1) #define CORE_PWRCTL_IO_LOW BIT(2) @@ -63,17 +58,13 @@ #define CORE_CDR_EXT_EN BIT(19) #define CORE_DLL_PDN BIT(29) #define CORE_DLL_RST BIT(30) -#define CORE_DLL_CONFIG 0x100 #define CORE_CMD_DAT_TRACK_SEL BIT(0) -#define CORE_DLL_STATUS 0x108 -#define CORE_DLL_CONFIG_2 0x1b4 #define CORE_DDR_CAL_EN BIT(0) #define CORE_FLL_CYCLE_CNT BIT(18) #define CORE_DLL_CLOCK_DISABLE BIT(21) -#define CORE_VENDOR_SPEC 0x10c -#define CORE_VENDOR_SPEC_POR_VAL 0xa1c +#define CORE_VENDOR_SPEC_POR_VAL 0xa1c #define CORE_CLK_PWRSAVE BIT(1) #define CORE_HC_MCLK_SEL_DFLT (2 << 8) #define CORE_HC_MCLK_SEL_HS400 (3 << 8) @@ -111,17 +102,14 @@ #define CORE_CDC_SWITCH_BYPASS_OFF BIT(0) #define CORE_CDC_SWITCH_RC_EN BIT(1) -#define CORE_DDR_200_CFG 0x184 #define CORE_CDC_T4_DLY_SEL BIT(0) #define CORE_CMDIN_RCLK_EN BIT(1) #define CORE_START_CDC_TRAFFIC BIT(6) -#define CORE_VENDOR_SPEC3 0x1b0 + #define CORE_PWRSAVE_DLL BIT(3) -#define CORE_DDR_CONFIG 0x1b8 #define DDR_CONFIG_POR_VAL 0x80040853 -#define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c #define INVALID_TUNING_PHASE -1 #define SDHCI_MSM_MIN_CLOCK 400000 @@ -137,6 +125,117 @@ /* Timeout value to avoid infinite waiting for pwr_irq */ #define MSM_PWR_IRQ_TIMEOUT_MS 5000 +#define msm_host_readl(msm_host, host, offset) \ + msm_host->var_ops->msm_readl_relaxed(host, offset) + +#define msm_host_writel(msm_host, val, host, offset) \ + msm_host->var_ops->msm_writel_relaxed(val, host, offset) + +struct sdhci_msm_offset { + u32 core_hc_mode; + u32 core_mci_data_cnt; + u32 core_mci_status; + u32 core_mci_fifo_cnt; + u32 core_mci_version; + u32 core_generics; + u32 core_testbus_config; + u32 core_testbus_sel2_bit; + u32 core_testbus_ena; + u32 core_testbus_sel2; + u32 core_pwrctl_status; + u32 core_pwrctl_mask; + u32 core_pwrctl_clear; + u32 core_pwrctl_ctl; + u32 core_sdcc_debug_reg; + u32 core_dll_config; + u32 core_dll_status; + u32 core_vendor_spec; + u32 core_vendor_spec_adma_err_addr0; + u32 core_vendor_spec_adma_err_addr1; + u32 core_vendor_spec_func2; + u32 core_vendor_spec_capabilities0; + u32 core_ddr_200_cfg; + u32 core_vendor_spec3; + u32 core_dll_config_2; + u32 core_ddr_config; + u32 core_ddr_config_2; +}; + +static const struct sdhci_msm_offset sdhci_msm_v5_offset = { + .core_mci_data_cnt = 0x35c, + .core_mci_status = 0x324, + .core_mci_fifo_cnt = 0x308, + .core_mci_version = 0x318, + .core_generics = 0x320, + .core_testbus_config = 0x32c, + .core_testbus_sel2_bit = 3, + .core_testbus_ena = (1 << 31), + .core_testbus_sel2 = (1 << 3), + .core_pwrctl_status = 0x240, + .core_pwrctl_mask = 0x244, + .core_pwrctl_clear = 0x248, + .core_pwrctl_ctl = 0x24c, + .core_sdcc_debug_reg = 0x358, + .core_dll_config = 0x200, + .core_dll_status = 0x208, + .core_vendor_spec = 0x20c, + .core_vendor_spec_adma_err_addr0 = 0x214, + .core_vendor_spec_adma_err_addr1 = 0x218, + .core_vendor_spec_func2 = 0x210, + .core_vendor_spec_capabilities0 = 0x21c, + .core_ddr_200_cfg = 0x224, + .core_vendor_spec3 = 0x250, + .core_dll_config_2 = 0x254, + .core_ddr_config = 0x258, + .core_ddr_config_2 = 0x25c, +}; + +static const struct sdhci_msm_offset sdhci_msm_mci_offset = { + .core_hc_mode = 0x78, + .core_mci_data_cnt = 0x30, + .core_mci_status = 0x34, + .core_mci_fifo_cnt = 0x44, + .core_mci_version = 0x050, + .core_generics = 0x70, + .core_testbus_config = 0x0cc, + .core_testbus_sel2_bit = 4, + .core_testbus_ena = (1 << 3), + .core_testbus_sel2 = (1 << 4), + .core_pwrctl_status = 0xdc, + .core_pwrctl_mask = 0xe0, + .core_pwrctl_clear = 0xe4, + .core_pwrctl_ctl = 0xe8, + .core_sdcc_debug_reg = 0x124, + .core_dll_config = 0x100, + .core_dll_status = 0x108, + .core_vendor_spec = 0x10c, + .core_vendor_spec_adma_err_addr0 = 0x114, + .core_vendor_spec_adma_err_addr1 = 0x118, + .core_vendor_spec_func2 = 0x110, + .core_vendor_spec_capabilities0 = 0x11c, + .core_ddr_200_cfg = 0x184, + .core_vendor_spec3 = 0x1b0, + .core_dll_config_2 = 0x1b4, + .core_ddr_config = 0x1b8, + .core_ddr_config_2 = 0x1bc, +}; + +struct sdhci_msm_variant_ops { + u32 (*msm_readl_relaxed)(struct sdhci_host *host, u32 offset); + void (*msm_writel_relaxed)(u32 val, struct sdhci_host *host, + u32 offset); +}; + +/* + * From V5, register spaces have changed. Wrap this info in a structure + * and choose the data_structure based on version info mentioned in DT. + */ +struct sdhci_msm_variant_info { + bool mci_removed; + const struct sdhci_msm_variant_ops *var_ops; + const struct sdhci_msm_offset *offset; +}; + struct sdhci_msm_host { struct platform_device *pdev; void __iomem *core_mem; /* MSM SDCC mapped address */ @@ -156,8 +255,53 @@ struct sdhci_msm_host { wait_queue_head_t pwr_irq_wait; bool pwr_irq_flag; u32 caps_0; + bool mci_removed; + const struct sdhci_msm_variant_ops *var_ops; + const struct sdhci_msm_offset *offset; }; +static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + + return msm_host->offset; +} + +/* + * APIs to read/write to vendor specific registers which were there in the + * core_mem region before MCI was removed. + */ +static u32 sdhci_msm_mci_variant_readl_relaxed(struct sdhci_host *host, + u32 offset) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + + return readl_relaxed(msm_host->core_mem + offset); +} + +static u32 sdhci_msm_v5_variant_readl_relaxed(struct sdhci_host *host, + u32 offset) +{ + return readl_relaxed(host->ioaddr + offset); +} + +static void sdhci_msm_mci_variant_writel_relaxed(u32 val, + struct sdhci_host *host, u32 offset) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + + writel_relaxed(val, msm_host->core_mem + offset); +} + +static void sdhci_msm_v5_variant_writel_relaxed(u32 val, + struct sdhci_host *host, u32 offset) +{ + writel_relaxed(val, host->ioaddr + offset); +} + static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host, unsigned int clock) { @@ -205,10 +349,12 @@ static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll) u32 wait_cnt = 50; u8 ck_out_en; struct mmc_host *mmc = host->mmc; + const struct sdhci_msm_offset *msm_offset = + sdhci_priv_msm_offset(host); /* Poll for CK_OUT_EN bit. max. poll time = 50us */ - ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & - CORE_CK_OUT_EN); + ck_out_en = !!(readl_relaxed(host->ioaddr + + msm_offset->core_dll_config) & CORE_CK_OUT_EN); while (ck_out_en != poll) { if (--wait_cnt == 0) { @@ -218,8 +364,8 @@ static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll) } udelay(1); - ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & - CORE_CK_OUT_EN); + ck_out_en = !!(readl_relaxed(host->ioaddr + + msm_offset->core_dll_config) & CORE_CK_OUT_EN); } return 0; @@ -235,16 +381,18 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) unsigned long flags; u32 config; struct mmc_host *mmc = host->mmc; + const struct sdhci_msm_offset *msm_offset = + sdhci_priv_msm_offset(host); if (phase > 0xf) return -EINVAL; spin_lock_irqsave(&host->lock, flags); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN); config |= (CORE_CDR_EXT_EN | CORE_DLL_EN); - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */ rc = msm_dll_poll_ck_out_en(host, 0); @@ -255,24 +403,24 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) * Write the selected DLL clock output phase (0 ... 15) * to CDR_SELEXT bit field of DLL_CONFIG register. */ - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config &= ~CDR_SELEXT_MASK; config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config |= CORE_CK_OUT_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */ rc = msm_dll_poll_ck_out_en(host, 1); if (rc) goto err_out; - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config |= CORE_CDR_EN; config &= ~CORE_CDR_EXT_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); goto out; err_out: @@ -398,6 +546,8 @@ static int msm_find_most_appropriate_phase(struct sdhci_host *host, static inline void msm_cm_dll_set_freq(struct sdhci_host *host) { u32 mclk_freq = 0, config; + const struct sdhci_msm_offset *msm_offset = + sdhci_priv_msm_offset(host); /* Program the MCLK value to MCLK_FREQ bit field */ if (host->clock <= 112000000) @@ -417,10 +567,10 @@ static inline void msm_cm_dll_set_freq(struct sdhci_host *host) else if (host->clock <= 200000000) mclk_freq = 7; - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config &= ~CMUX_SHIFT_PHASE_MASK; config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); } /* Initialize the DLL (Programmable Delay Line) */ @@ -432,6 +582,8 @@ static int msm_init_cm_dll(struct sdhci_host *host) int wait_cnt = 50; unsigned long flags; u32 config; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; spin_lock_irqsave(&host->lock, flags); @@ -440,34 +592,43 @@ static int msm_init_cm_dll(struct sdhci_host *host) * tuning is in progress. Keeping PWRSAVE ON may * turn off the clock. */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec); config &= ~CORE_CLK_PWRSAVE; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec); if (msm_host->use_14lpp_dll_reset) { - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config &= ~CORE_CK_OUT_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config_2); config |= CORE_DLL_CLOCK_DISABLE; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config_2); } - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_DLL_RST; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_DLL_PDN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); msm_cm_dll_set_freq(host); if (msm_host->use_14lpp_dll_reset && !IS_ERR_OR_NULL(msm_host->xo_clk)) { u32 mclk_freq = 0; - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config_2); config &= CORE_FLL_CYCLE_CNT; if (config) mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 8), @@ -476,40 +637,52 @@ static int msm_init_cm_dll(struct sdhci_host *host) mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 4), clk_get_rate(msm_host->xo_clk)); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config_2); config &= ~(0xFF << 10); config |= mclk_freq << 10; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config_2); /* wait for 5us before enabling DLL clock */ udelay(5); } - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config &= ~CORE_DLL_RST; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config &= ~CORE_DLL_PDN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); if (msm_host->use_14lpp_dll_reset) { msm_cm_dll_set_freq(host); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config_2); config &= ~CORE_DLL_CLOCK_DISABLE; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config_2); } - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_DLL_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_CK_OUT_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */ - while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) & + while (!(readl_relaxed(host->ioaddr + msm_offset->core_dll_status) & CORE_DLL_LOCK)) { /* max. wait for 50us sec for LOCK bit to be set */ if (--wait_cnt == 0) { @@ -530,19 +703,21 @@ static void msm_hc_select_default(struct sdhci_host *host) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u32 config; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; if (!msm_host->use_cdclp533) { config = readl_relaxed(host->ioaddr + - CORE_VENDOR_SPEC3); + msm_offset->core_vendor_spec3); config &= ~CORE_PWRSAVE_DLL; writel_relaxed(config, host->ioaddr + - CORE_VENDOR_SPEC3); + msm_offset->core_vendor_spec3); } - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec); config &= ~CORE_HC_MCLK_SEL_MASK; config |= CORE_HC_MCLK_SEL_DFLT; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec); /* * Disable HC_SELECT_IN to be able to use the UHS mode select @@ -551,10 +726,10 @@ static void msm_hc_select_default(struct sdhci_host *host) * Write 0 to HC_SELECT_IN and HC_SELECT_IN_EN field * in VENDOR_SPEC_FUNC */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec); config &= ~CORE_HC_SELECT_IN_EN; config &= ~CORE_HC_SELECT_IN_MASK; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec); /* * Make sure above writes impacting free running MCLK are completed @@ -570,32 +745,36 @@ static void msm_hc_select_hs400(struct sdhci_host *host) struct mmc_ios ios = host->mmc->ios; u32 config, dll_lock; int rc; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; /* Select the divided clock (free running MCLK/2) */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec); config &= ~CORE_HC_MCLK_SEL_MASK; config |= CORE_HC_MCLK_SEL_HS400; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec); /* * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC * register */ if ((msm_host->tuning_done || ios.enhanced_strobe) && !msm_host->calibration_done) { - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + + msm_offset->core_vendor_spec); config |= CORE_HC_SELECT_IN_HS400; config |= CORE_HC_SELECT_IN_EN; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, host->ioaddr + + msm_offset->core_vendor_spec); } if (!msm_host->clk_rate && !msm_host->use_cdclp533) { /* * Poll on DLL_LOCK or DDR_DLL_LOCK bits in - * CORE_DLL_STATUS to be set. This should get set + * core_dll_status to be set. This should get set * within 15 us at 200 MHz. */ rc = readl_relaxed_poll_timeout(host->ioaddr + - CORE_DLL_STATUS, + msm_offset->core_dll_status, dll_lock, (dll_lock & (CORE_DLL_LOCK | @@ -647,6 +826,8 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u32 config, calib_done; int ret; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__); @@ -663,13 +844,13 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) if (ret) goto out; - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config); config |= CORE_CMD_DAT_TRACK_SEL; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG); + config = readl_relaxed(host->ioaddr + msm_offset->core_ddr_200_cfg); config &= ~CORE_CDC_T4_DLY_SEL; - writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG); + writel_relaxed(config, host->ioaddr + msm_offset->core_ddr_200_cfg); config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_GEN_CFG); config &= ~CORE_CDC_SWITCH_BYPASS_OFF; @@ -679,9 +860,9 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) config |= CORE_CDC_SWITCH_RC_EN; writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_GEN_CFG); - config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG); + config = readl_relaxed(host->ioaddr + msm_offset->core_ddr_200_cfg); config &= ~CORE_START_CDC_TRAFFIC; - writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG); + writel_relaxed(config, host->ioaddr + msm_offset->core_ddr_200_cfg); /* Perform CDC Register Initialization Sequence */ @@ -733,9 +914,9 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) goto out; } - config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG); + config = readl_relaxed(host->ioaddr + msm_offset->core_ddr_200_cfg); config |= CORE_START_CDC_TRAFFIC; - writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG); + writel_relaxed(config, host->ioaddr + msm_offset->core_ddr_200_cfg); out: pr_debug("%s: %s: Exit, ret %d\n", mmc_hostname(host->mmc), __func__, ret); @@ -747,32 +928,38 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host) struct mmc_host *mmc = host->mmc; u32 dll_status, config; int ret; + const struct sdhci_msm_offset *msm_offset = + sdhci_priv_msm_offset(host); pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__); /* - * Currently the CORE_DDR_CONFIG register defaults to desired + * Currently the core_ddr_config register defaults to desired * configuration on reset. Currently reprogramming the power on * reset (POR) value in case it might have been modified by * bootloaders. In the future, if this changes, then the desired * values will need to be programmed appropriately. */ - writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + CORE_DDR_CONFIG); + writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + + msm_offset->core_ddr_config); if (mmc->ios.enhanced_strobe) { - config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_ddr_200_cfg); config |= CORE_CMDIN_RCLK_EN; - writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_ddr_200_cfg); } - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2); + config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config_2); config |= CORE_DDR_CAL_EN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2); + writel_relaxed(config, host->ioaddr + msm_offset->core_dll_config_2); - ret = readl_relaxed_poll_timeout(host->ioaddr + CORE_DLL_STATUS, - dll_status, - (dll_status & CORE_DDR_DLL_LOCK), - 10, 1000); + ret = readl_relaxed_poll_timeout(host->ioaddr + + msm_offset->core_dll_status, + dll_status, + (dll_status & CORE_DDR_DLL_LOCK), + 10, 1000); if (ret == -ETIMEDOUT) { pr_err("%s: %s: CM_DLL_SDC4 calibration was not completed\n", @@ -780,9 +967,9 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host) goto out; } - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC3); + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec3); config |= CORE_PWRSAVE_DLL; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC3); + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec3); /* * Drain writebuffer to ensure above DLL calibration @@ -802,6 +989,8 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host) struct mmc_host *mmc = host->mmc; int ret; u32 config; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__); @@ -819,9 +1008,11 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host) msm_host->saved_tuning_phase); if (ret) goto out; - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_CMD_DAT_TRACK_SEL; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); } if (msm_host->use_cdclp533) @@ -951,6 +1142,8 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u16 ctrl_2; u32 config; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); /* Select Bus Speed Mode for host */ @@ -991,13 +1184,17 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, * DLL is not required for clock <= 100MHz * Thus, make sure DLL it is disabled when not required */ - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_DLL_RST; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); config |= CORE_DLL_PDN; - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); /* * The DLL needs to be restored and CDCLP533 recalibrated @@ -1039,7 +1236,9 @@ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); bool done = false; - u32 val; + u32 val = SWITCHABLE_SIGNALING_VOLTAGE; + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n", mmc_hostname(host->mmc), __func__, req_type, @@ -1048,8 +1247,12 @@ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) /* * The power interrupt will not be generated for signal voltage * switches if SWITCHABLE_SIGNALING_VOLTAGE in MCI_GENERICS is not set. + * Since sdhci-msm-v5, this bit has been removed and SW must consider + * it as always set. */ - val = readl(msm_host->core_mem + CORE_MCI_GENERICS); + if (!msm_host->mci_removed) + val = msm_host_readl(msm_host, host, + msm_offset->core_generics); if ((req_type & REQ_IO_HIGH || req_type & REQ_IO_LOW) && !(val & SWITCHABLE_SIGNALING_VOLTAGE)) { return; @@ -1097,12 +1300,14 @@ static void sdhci_msm_dump_pwr_ctrl_regs(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + const struct sdhci_msm_offset *msm_offset = + msm_host->offset; pr_err("%s: PWRCTL_STATUS: 0x%08x | PWRCTL_MASK: 0x%08x | PWRCTL_CTL: 0x%08x\n", - mmc_hostname(host->mmc), - readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS), - readl_relaxed(msm_host->core_mem + CORE_PWRCTL_MASK), - readl_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL)); + mmc_hostname(host->mmc), + msm_host_readl(msm_host, host, msm_offset->core_pwrctl_status), + msm_host_readl(msm_host, host, msm_offset->core_pwrctl_mask), + msm_host_readl(msm_host, host, msm_offset->core_pwrctl_ctl)); } static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) @@ -1113,11 +1318,14 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) int retry = 10; u32 pwr_state = 0, io_level = 0; u32 config; + const struct sdhci_msm_offset *msm_offset = msm_host->offset; - irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS); + irq_status = msm_host_readl(msm_host, host, + msm_offset->core_pwrctl_status); irq_status &= INT_MASK; - writel_relaxed(irq_status, msm_host->core_mem + CORE_PWRCTL_CLEAR); + msm_host_writel(msm_host, irq_status, host, + msm_offset->core_pwrctl_clear); /* * There is a rare HW scenario where the first clear pulse could be @@ -1126,8 +1334,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) * sure status register is cleared. Otherwise, this will result in * a spurious power IRQ resulting in system instability. */ - while (irq_status & readl_relaxed(msm_host->core_mem + - CORE_PWRCTL_STATUS)) { + while (irq_status & msm_host_readl(msm_host, host, + msm_offset->core_pwrctl_status)) { if (retry == 0) { pr_err("%s: Timedout clearing (0x%x) pwrctl status register\n", mmc_hostname(host->mmc), irq_status); @@ -1135,8 +1343,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) WARN_ON(1); break; } - writel_relaxed(irq_status, - msm_host->core_mem + CORE_PWRCTL_CLEAR); + msm_host_writel(msm_host, irq_status, host, + msm_offset->core_pwrctl_clear); retry--; udelay(10); } @@ -1167,7 +1375,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) * report back if it succeded or not to this register. The voltage * switches are handled by the sdhci core, so just report success. */ - writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL); + msm_host_writel(msm_host, irq_ack, host, + msm_offset->core_pwrctl_ctl); /* * If we don't have info regarding the voltage levels supported by @@ -1186,7 +1395,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) * controllers with only 1.8V, we will set the IO PAD bit * without waiting for a REQ_IO_LOW. */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + + msm_offset->core_vendor_spec); new_config = config; if ((io_level & REQ_IO_HIGH) && @@ -1197,8 +1407,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) new_config |= CORE_IO_PAD_PWR_SWITCH; if (config ^ new_config) - writel_relaxed(new_config, - host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(new_config, host->ioaddr + + msm_offset->core_vendor_spec); } if (pwr_state) @@ -1359,6 +1569,7 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host) struct regulator *supply = mmc->supply.vqmmc; u32 caps = 0, config; struct sdhci_host *host = mmc_priv(mmc); + const struct sdhci_msm_offset *msm_offset = msm_host->offset; if (!IS_ERR(mmc->supply.vqmmc)) { if (regulator_is_supported_voltage(supply, 1700000, 1950000)) @@ -1378,7 +1589,8 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host) */ u32 io_level = msm_host->curr_io_level; - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config = readl_relaxed(host->ioaddr + + msm_offset->core_vendor_spec); config |= CORE_IO_PAD_PWR_SWITCH_EN; if ((io_level & REQ_IO_HIGH) && (caps & CORE_3_0V_SUPPORT)) @@ -1386,14 +1598,38 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host) else if ((io_level & REQ_IO_LOW) || (caps & CORE_1_8V_SUPPORT)) config |= CORE_IO_PAD_PWR_SWITCH; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + writel_relaxed(config, + host->ioaddr + msm_offset->core_vendor_spec); } msm_host->caps_0 |= caps; pr_debug("%s: supported caps: 0x%08x\n", mmc_hostname(mmc), caps); } +static const struct sdhci_msm_variant_ops mci_var_ops = { + .msm_readl_relaxed = sdhci_msm_mci_variant_readl_relaxed, + .msm_writel_relaxed = sdhci_msm_mci_variant_writel_relaxed, +}; + +static const struct sdhci_msm_variant_ops v5_var_ops = { + .msm_readl_relaxed = sdhci_msm_v5_variant_readl_relaxed, + .msm_writel_relaxed = sdhci_msm_v5_variant_writel_relaxed, +}; + +static const struct sdhci_msm_variant_info sdhci_msm_mci_var = { + .mci_removed = false, + .var_ops = &mci_var_ops, + .offset = &sdhci_msm_mci_offset, +}; + +static const struct sdhci_msm_variant_info sdhci_msm_v5_var = { + .mci_removed = true, + .var_ops = &v5_var_ops, + .offset = &sdhci_msm_v5_offset, +}; + static const struct of_device_id sdhci_msm_dt_match[] = { - { .compatible = "qcom,sdhci-msm-v4" }, + {.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var}, + {.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var}, {}, }; @@ -1429,6 +1665,8 @@ static int sdhci_msm_probe(struct platform_device *pdev) u16 host_version, core_minor; u32 core_version, config; u8 core_major; + const struct sdhci_msm_offset *msm_offset; + const struct sdhci_msm_variant_info *var_info; host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host)); if (IS_ERR(host)) @@ -1444,6 +1682,18 @@ static int sdhci_msm_probe(struct platform_device *pdev) if (ret) goto pltfm_free; + /* + * Based on the compatible string, load the required msm host info from + * the data associated with the version info. + */ + var_info = of_device_get_match_data(&pdev->dev); + + msm_host->mci_removed = var_info->mci_removed; + msm_host->var_ops = var_info->var_ops; + msm_host->offset = var_info->offset; + + msm_offset = msm_host->offset; + sdhci_get_of_property(pdev); msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; @@ -1508,32 +1758,39 @@ static int sdhci_msm_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "TCXO clk not present (%d)\n", ret); } - core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); - msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres); + if (!msm_host->mci_removed) { + core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); + msm_host->core_mem = devm_ioremap_resource(&pdev->dev, + core_memres); - if (IS_ERR(msm_host->core_mem)) { - dev_err(&pdev->dev, "Failed to remap registers\n"); - ret = PTR_ERR(msm_host->core_mem); - goto clk_disable; + if (IS_ERR(msm_host->core_mem)) { + ret = PTR_ERR(msm_host->core_mem); + goto clk_disable; + } } /* Reset the vendor spec register to power on reset state */ writel_relaxed(CORE_VENDOR_SPEC_POR_VAL, - host->ioaddr + CORE_VENDOR_SPEC); - - /* Set HC_MODE_EN bit in HC_MODE register */ - writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); - - config = readl_relaxed(msm_host->core_mem + CORE_HC_MODE); - config |= FF_CLK_SW_RST_DIS; - writel_relaxed(config, msm_host->core_mem + CORE_HC_MODE); + host->ioaddr + msm_offset->core_vendor_spec); + + if (!msm_host->mci_removed) { + /* Set HC_MODE_EN bit in HC_MODE register */ + msm_host_writel(msm_host, HC_MODE_EN, host, + msm_offset->core_hc_mode); + config = msm_host_readl(msm_host, host, + msm_offset->core_hc_mode); + config |= FF_CLK_SW_RST_DIS; + msm_host_writel(msm_host, config, host, + msm_offset->core_hc_mode); + } host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n", host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT)); - core_version = readl_relaxed(msm_host->core_mem + CORE_MCI_VERSION); + core_version = msm_host_readl(msm_host, host, + msm_offset->core_mci_version); core_major = (core_version & CORE_VERSION_MAJOR_MASK) >> CORE_VERSION_MAJOR_SHIFT; core_minor = core_version & CORE_VERSION_MINOR_MASK; @@ -1558,7 +1815,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) config = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES); config |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT; writel_relaxed(config, host->ioaddr + - CORE_VENDOR_SPEC_CAPABILITIES0); + msm_offset->core_vendor_spec_capabilities0); } /* @@ -1587,7 +1844,8 @@ static int sdhci_msm_probe(struct platform_device *pdev) sdhci_msm_init_pwr_irq_wait(msm_host); /* Enable pwr irq interrupts */ - writel_relaxed(INT_MASK, msm_host->core_mem + CORE_PWRCTL_MASK); + msm_host_writel(msm_host, INT_MASK, host, + msm_offset->core_pwrctl_mask); ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL, sdhci_msm_pwr_irq, IRQF_ONESHOT, diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index e3332a522a5d..a40bcc27f187 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -102,6 +102,9 @@ struct sdhci_arasan_data { /* Controller does not have CD wired and will not function normally without */ #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST BIT(0) +/* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the + * internal clock even when the clock isn't stable */ +#define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1) }; static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = { @@ -207,6 +210,16 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_set_clock(host, clock); + if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE) + /* + * Some controllers immediately report SDHCI_CLOCK_INT_STABLE + * after enabling the clock even though the clock is not + * stable. Trying to use a clock without waiting here results + * in EILSEQ while detecting some older/slower cards. The + * chosen delay is the maximum delay from sdhci_set_clock. + */ + msleep(20); + if (ctrl_phy) { phy_power_on(sdhci_arasan->phy); sdhci_arasan->is_phy_on = true; @@ -758,6 +771,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev) if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST; + if (of_property_read_bool(np, "xlnx,int-clock-stable-broken")) + sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE; + pltfm_host->clk = clk_xin; if (of_device_is_compatible(pdev->dev.of_node, diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c new file mode 100644 index 000000000000..1b7cd144fb01 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Synopsys DesignWare Cores Mobile Storage Host Controller + * + * Copyright (C) 2018 Synaptics Incorporated + * + * Author: Jisheng Zhang <jszhang@kernel.org> + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> + +#include "sdhci-pltfm.h" + +struct dwcmshc_priv { + struct clk *bus_clk; +}; + +static const struct sdhci_ops sdhci_dwcmshc_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .reset = sdhci_reset, +}; + +static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { + .ops = &sdhci_dwcmshc_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, +}; + +static int dwcmshc_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_host *host; + struct dwcmshc_priv *priv; + int err; + + host = sdhci_pltfm_init(pdev, &sdhci_dwcmshc_pdata, + sizeof(struct dwcmshc_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + + pltfm_host->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(pltfm_host->clk)) { + err = PTR_ERR(pltfm_host->clk); + dev_err(&pdev->dev, "failed to get core clk: %d\n", err); + goto free_pltfm; + } + err = clk_prepare_enable(pltfm_host->clk); + if (err) + goto free_pltfm; + + priv->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR(priv->bus_clk)) + clk_prepare_enable(priv->bus_clk); + + err = mmc_of_parse(host->mmc); + if (err) + goto err_clk; + + sdhci_get_of_property(pdev); + + err = sdhci_add_host(host); + if (err) + goto err_clk; + + return 0; + +err_clk: + clk_disable_unprepare(pltfm_host->clk); + clk_disable_unprepare(priv->bus_clk); +free_pltfm: + sdhci_pltfm_free(pdev); + return err; +} + +static int dwcmshc_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + + sdhci_remove_host(host, 0); + + clk_disable_unprepare(pltfm_host->clk); + clk_disable_unprepare(priv->bus_clk); + + sdhci_pltfm_free(pdev); + + return 0; +} + +static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { + { .compatible = "snps,dwcmshc-sdhci" }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids); + +static struct platform_driver sdhci_dwcmshc_driver = { + .driver = { + .name = "sdhci-dwcmshc", + .of_match_table = sdhci_dwcmshc_dt_ids, + }, + .probe = dwcmshc_probe, + .remove = dwcmshc_remove, +}; +module_platform_driver(sdhci_dwcmshc_driver); + +MODULE_DESCRIPTION("SDHCI platform driver for Synopsys DWC MSHC"); +MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 4ffa6b173a21..9cb7554a463d 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -22,6 +22,7 @@ #include <linux/sys_soc.h> #include <linux/clk.h> #include <linux/ktime.h> +#include <linux/dma-mapping.h> #include <linux/mmc/host.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -29,11 +30,56 @@ #define VENDOR_V_22 0x12 #define VENDOR_V_23 0x13 +#define MMC_TIMING_NUM (MMC_TIMING_MMC_HS400 + 1) + +struct esdhc_clk_fixup { + const unsigned int sd_dflt_max_clk; + const unsigned int max_clk[MMC_TIMING_NUM]; +}; + +static const struct esdhc_clk_fixup ls1021a_esdhc_clk = { + .sd_dflt_max_clk = 25000000, + .max_clk[MMC_TIMING_MMC_HS] = 46500000, + .max_clk[MMC_TIMING_SD_HS] = 46500000, +}; + +static const struct esdhc_clk_fixup ls1046a_esdhc_clk = { + .sd_dflt_max_clk = 25000000, + .max_clk[MMC_TIMING_UHS_SDR104] = 167000000, + .max_clk[MMC_TIMING_MMC_HS200] = 167000000, +}; + +static const struct esdhc_clk_fixup ls1012a_esdhc_clk = { + .sd_dflt_max_clk = 25000000, + .max_clk[MMC_TIMING_UHS_SDR104] = 125000000, + .max_clk[MMC_TIMING_MMC_HS200] = 125000000, +}; + +static const struct esdhc_clk_fixup p1010_esdhc_clk = { + .sd_dflt_max_clk = 20000000, + .max_clk[MMC_TIMING_LEGACY] = 20000000, + .max_clk[MMC_TIMING_MMC_HS] = 42000000, + .max_clk[MMC_TIMING_SD_HS] = 40000000, +}; + +static const struct of_device_id sdhci_esdhc_of_match[] = { + { .compatible = "fsl,ls1021a-esdhc", .data = &ls1021a_esdhc_clk}, + { .compatible = "fsl,ls1046a-esdhc", .data = &ls1046a_esdhc_clk}, + { .compatible = "fsl,ls1012a-esdhc", .data = &ls1012a_esdhc_clk}, + { .compatible = "fsl,p1010-esdhc", .data = &p1010_esdhc_clk}, + { .compatible = "fsl,mpc8379-esdhc" }, + { .compatible = "fsl,mpc8536-esdhc" }, + { .compatible = "fsl,esdhc" }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match); + struct sdhci_esdhc { u8 vendor_ver; u8 spec_ver; bool quirk_incorrect_hostver; unsigned int peripheral_clock; + const struct esdhc_clk_fixup *clk_fixup; }; /** @@ -427,6 +473,11 @@ static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask) static int esdhc_of_enable_dma(struct sdhci_host *host) { u32 value; + struct device *dev = mmc_dev(host->mmc); + + if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") || + of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40)); value = sdhci_readl(host, ESDHC_DMA_SYSCTL); value |= ESDHC_DMA_SNOOP; @@ -492,6 +543,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) int pre_div = 1; int div = 1; ktime_t timeout; + long fixup = 0; u32 temp; host->mmc->actual_clock = 0; @@ -505,27 +557,14 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) if (esdhc->vendor_ver < VENDOR_V_23) pre_div = 2; - /* - * Limit SD clock to 167MHz for ls1046a according to its datasheet - */ - if (clock > 167000000 && - of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc")) - clock = 167000000; + if (host->mmc->card && mmc_card_sd(host->mmc->card) && + esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY) + fixup = esdhc->clk_fixup->sd_dflt_max_clk; + else if (esdhc->clk_fixup) + fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing]; - /* - * Limit SD clock to 125MHz for ls1012a according to its datasheet - */ - if (clock > 125000000 && - of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc")) - clock = 125000000; - - /* Workaround to reduce the clock frequency for p1010 esdhc */ - if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) { - if (clock > 20000000) - clock -= 5000000; - if (clock > 40000000) - clock -= 5000000; - } + if (fixup && clock > fixup) + clock = fixup; temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | @@ -783,6 +822,7 @@ static struct soc_device_attribute soc_incorrect_hostver[] = { static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) { + const struct of_device_id *match; struct sdhci_pltfm_host *pltfm_host; struct sdhci_esdhc *esdhc; struct device_node *np; @@ -802,6 +842,9 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) else esdhc->quirk_incorrect_hostver = false; + match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node); + if (match) + esdhc->clk_fixup = match->data; np = pdev->dev.of_node; clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { @@ -901,14 +944,6 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) return ret; } -static const struct of_device_id sdhci_esdhc_of_match[] = { - { .compatible = "fsl,mpc8379-esdhc" }, - { .compatible = "fsl,mpc8536-esdhc" }, - { .compatible = "fsl,esdhc" }, - { } -}; -MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match); - static struct platform_driver sdhci_esdhc_driver = { .driver = { .name = "sdhci-esdhc", diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 77dd3521daae..7bfd366d970d 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1500,6 +1500,8 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(INTEL, CNP_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, CNP_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, CNPH_SD, intel_byt_sd), + SDHCI_PCI_DEVICE(INTEL, ICP_EMMC, intel_glk_emmc), + SDHCI_PCI_DEVICE(INTEL, ICP_SD, intel_byt_sd), SDHCI_PCI_DEVICE(O2, 8120, o2), SDHCI_PCI_DEVICE(O2, 8220, o2), SDHCI_PCI_DEVICE(O2, 8221, o2), @@ -1511,6 +1513,7 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(O2, SEABIRD0, o2), SDHCI_PCI_DEVICE(O2, SEABIRD1, o2), SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan), + SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps), SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd), /* Generic SD host controller */ {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)}, diff --git a/drivers/mmc/host/sdhci-pci-dwc-mshc.c b/drivers/mmc/host/sdhci-pci-dwc-mshc.c new file mode 100644 index 000000000000..f78d65448d17 --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-dwc-mshc.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDHCI driver for Synopsys DWC_MSHC controller + * + * Copyright (C) 2018 Synopsys, Inc. (www.synopsys.com) + * + * Authors: + * Prabu Thangamuthu <prabu.t@synopsys.com> + * Manjunath M B <manjumb@synopsys.com> + */ + +#include "sdhci.h" +#include "sdhci-pci.h" + +#define SDHCI_VENDOR_PTR_R 0xE8 + +/* Synopsys vendor specific registers */ +#define SDHC_GPIO_OUT 0x34 +#define SDHC_AT_CTRL_R 0x40 +#define SDHC_SW_TUNE_EN 0x00000010 + +/* MMCM DRP */ +#define SDHC_MMCM_DIV_REG 0x1020 +#define DIV_REG_100_MHZ 0x1145 +#define DIV_REG_200_MHZ 0x1083 +#define SDHC_MMCM_CLKFBOUT 0x1024 +#define CLKFBOUT_100_MHZ 0x0000 +#define CLKFBOUT_200_MHZ 0x0080 +#define SDHC_CCLK_MMCM_RST 0x00000001 + +static void sdhci_snps_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u16 clk; + u32 reg, vendor_ptr; + + vendor_ptr = sdhci_readw(host, SDHCI_VENDOR_PTR_R); + + /* Disable software managed rx tuning */ + reg = sdhci_readl(host, (SDHC_AT_CTRL_R + vendor_ptr)); + reg &= ~SDHC_SW_TUNE_EN; + sdhci_writel(host, reg, (SDHC_AT_CTRL_R + vendor_ptr)); + + if (clock <= 52000000) { + sdhci_set_clock(host, clock); + } else { + /* Assert reset to MMCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg |= SDHC_CCLK_MMCM_RST; + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* Configure MMCM */ + if (clock == 100000000) { + sdhci_writel(host, DIV_REG_100_MHZ, SDHC_MMCM_DIV_REG); + sdhci_writel(host, CLKFBOUT_100_MHZ, + SDHC_MMCM_CLKFBOUT); + } else { + sdhci_writel(host, DIV_REG_200_MHZ, SDHC_MMCM_DIV_REG); + sdhci_writel(host, CLKFBOUT_200_MHZ, + SDHC_MMCM_CLKFBOUT); + } + + /* De-assert reset to MMCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_CCLK_MMCM_RST; + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* Enable clock */ + clk = SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN | + SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + } +} + +static const struct sdhci_ops sdhci_snps_ops = { + .set_clock = sdhci_snps_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +const struct sdhci_pci_fixes sdhci_snps = { + .ops = &sdhci_snps_ops, +}; diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index 555970a29c94..77e9bc4aaee9 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -3,6 +3,7 @@ * * Authors: Peter Guo <peter.guo@bayhubtech.com> * Adam Lee <adam.lee@canonical.com> + * Ernest Zhang <ernest.zhang@bayhubtech.com> * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -16,6 +17,9 @@ */ #include <linux/pci.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/delay.h> #include "sdhci.h" #include "sdhci-pci.h" @@ -39,6 +43,7 @@ #define O2_SD_MISC_CTRL4 0xFC #define O2_SD_TUNING_CTRL 0x300 #define O2_SD_PLL_SETTING 0x304 +#define O2_SD_MISC_SETTING 0x308 #define O2_SD_CLK_SETTING 0x328 #define O2_SD_CAP_REG2 0x330 #define O2_SD_CAP_REG0 0x334 @@ -53,6 +58,82 @@ #define O2_SD_VENDOR_SETTING 0x110 #define O2_SD_VENDOR_SETTING2 0x1C8 +#define O2_SD_HW_TUNING_DISABLE BIT(4) + +static void sdhci_o2_set_tuning_mode(struct sdhci_host *host) +{ + u16 reg; + + /* enable hardware tuning */ + reg = sdhci_readw(host, O2_SD_VENDOR_SETTING); + reg &= ~O2_SD_HW_TUNING_DISABLE; + sdhci_writew(host, reg, O2_SD_VENDOR_SETTING); +} + +static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + int i; + + sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200); + + for (i = 0; i < 150; i++) { + u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { + if (ctrl & SDHCI_CTRL_TUNED_CLK) { + host->tuning_done = true; + return; + } + pr_warn("%s: HW tuning failed !\n", + mmc_hostname(host->mmc)); + break; + } + + mdelay(1); + } + + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_reset_tuning(host); +} + +static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + int current_bus_width = 0; + + /* + * This handler only implements the eMMC tuning that is specific to + * this controller. Fall back to the standard method for other TIMING. + */ + if (host->timing != MMC_TIMING_MMC_HS200) + return sdhci_execute_tuning(mmc, opcode); + + if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200)) + return -EINVAL; + + /* + * o2 sdhci host didn't support 8bit emmc tuning + */ + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { + current_bus_width = mmc->ios.bus_width; + sdhci_set_bus_width(host, MMC_BUS_WIDTH_4); + } + + sdhci_o2_set_tuning_mode(host); + + sdhci_start_tuning(host); + + __sdhci_o2_execute_tuning(host, opcode); + + sdhci_end_tuning(host); + + if (current_bus_width == MMC_BUS_WIDTH_8) + sdhci_set_bus_width(host, current_bus_width); + + host->flags &= ~SDHCI_HS400_TUNING; + return 0; +} static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) { @@ -179,11 +260,35 @@ static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32); } +static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip, + struct sdhci_host *host) +{ + int ret; + + ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI); + if (!ret) { + pr_info("%s: unsupport msi, use INTx irq\n", + mmc_hostname(host->mmc)); + return; + } + + ret = pci_alloc_irq_vectors(chip->pdev, 1, 1, + PCI_IRQ_MSI | PCI_IRQ_MSIX); + if (ret < 0) { + pr_err("%s: enable PCI MSI failed, err=%d\n", + mmc_hostname(host->mmc), ret); + return; + } + + host->irq = pci_irq_vector(chip->pdev, 0); +} + int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) { struct sdhci_pci_chip *chip; struct sdhci_host *host; u32 reg; + int ret; chip = slot->chip; host = slot->host; @@ -197,6 +302,25 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) if (reg & 0x1) host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + sdhci_pci_o2_enable_msi(chip, host); + + if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) { + ret = pci_read_config_dword(chip->pdev, + O2_SD_MISC_SETTING, ®); + if (ret) + return -EIO; + if (reg & (1 << 4)) { + pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n", + mmc_hostname(host->mmc)); + host->flags &= ~SDHCI_SIGNALING_330; + host->flags |= SDHCI_SIGNALING_180; + host->mmc->caps2 |= MMC_CAP2_NO_SD; + host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + } + } + + host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; + if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) break; /* set dll watch dog timer */ @@ -293,9 +417,8 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) /* Check Whether subId is 0x11 or 0x12 */ if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) { - scratch_32 = 0x2c280000; + scratch_32 = 0x25100000; - /* Set Base Clock to 208MZ */ o2_pci_set_baseclk(chip, scratch_32); ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG4, @@ -388,7 +511,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) O2_SD_PLL_SETTING, scratch_32); } else { scratch_32 &= 0x0000FFFF; - scratch_32 |= 0x2c280000; + scratch_32 |= 0x25100000; pci_write_config_dword(chip->pdev, O2_SD_PLL_SETTING, scratch_32); diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index db9cb54ef700..2ef0bdca9197 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -48,6 +48,8 @@ #define PCI_DEVICE_ID_INTEL_CNP_EMMC 0x9dc4 #define PCI_DEVICE_ID_INTEL_CNP_SD 0x9df5 #define PCI_DEVICE_ID_INTEL_CNPH_SD 0xa375 +#define PCI_DEVICE_ID_INTEL_ICP_EMMC 0x34c4 +#define PCI_DEVICE_ID_INTEL_ICP_SD 0x34f8 #define PCI_DEVICE_ID_SYSKONNECT_8000 0x8000 #define PCI_DEVICE_ID_VIA_95D0 0x95d0 @@ -59,6 +61,8 @@ #define PCI_VENDOR_ID_ARASAN 0x16e6 #define PCI_DEVICE_ID_ARASAN_PHY_EMMC 0x0670 +#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202 + /* * PCI device class and mask */ @@ -182,5 +186,6 @@ int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); #endif extern const struct sdhci_pci_fixes sdhci_arasan; +extern const struct sdhci_pci_fixes sdhci_snps; #endif /* __SDHCI_PCI_H */ diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 970d38f68939..908b23e6a03c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -210,9 +210,24 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) if (!clock) return sdhci_set_clock(host, clock); + /* + * In DDR50/52 modes the Tegra SDHCI controllers require the SDHCI + * divider to be configured to divided the host clock by two. The SDHCI + * clock divider is calculated as part of sdhci_set_clock() by + * sdhci_calc_clk(). The divider is calculated from host->max_clk and + * the requested clock rate. + * + * By setting the host->max_clk to clock * 2 the divider calculation + * will always result in the correct value for DDR50/52 modes, + * regardless of clock rate rounding, which may happen if the value + * from clk_get_rate() is used. + */ host_clk = tegra_host->ddr_signaling ? clock * 2 : clock; clk_set_rate(pltfm_host->clk, host_clk); - host->max_clk = clk_get_rate(pltfm_host->clk); + if (tegra_host->ddr_signaling) + host->max_clk = host_clk; + else + host->max_clk = clk_get_rate(pltfm_host->clk); sdhci_set_clock(host, clock); @@ -228,7 +243,8 @@ static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host, struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); - if (timing == MMC_TIMING_UHS_DDR50) + if (timing == MMC_TIMING_UHS_DDR50 || + timing == MMC_TIMING_MMC_DDR52) tegra_host->ddr_signaling = true; sdhci_set_uhs_signaling(host, timing); @@ -238,11 +254,7 @@ static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - /* - * DDR modes require the host to run at double the card frequency, so - * the maximum rate we can support is half of the module input clock. - */ - return clk_round_rate(pltfm_host->clk, UINT_MAX) / 2; + return clk_round_rate(pltfm_host->clk, UINT_MAX); } static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap) @@ -334,7 +346,16 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = { SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_BROKEN_HS200 | + /* + * Auto-CMD23 leads to "Got command interrupt 0x00010000 even + * though no command operation was in progress." + * + * The exact reason is unknown, as the same hardware seems + * to support Auto CMD23 on a downstream 3.1 kernel. + */ + SDHCI_QUIRK2_ACMD23_BROKEN, .ops = &tegra_sdhci_ops, }; diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c index a35804b203a7..c335052d0c02 100644 --- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -526,6 +526,7 @@ static bool xenon_emmc_phy_slow_mode(struct sdhci_host *host, ret = true; break; } + /* else: fall through */ default: reg &= ~XENON_TIMING_ADJUST_SLOW_MODE; ret = false; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 1c828e0e9905..1b3fbd9bd5c5 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1029,7 +1029,9 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, if (data == NULL) { if (host->quirks2 & SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) { - sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE); + /* must not clear SDHCI_TRANSFER_MODE when tuning */ + if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) + sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE); } else { /* clear Auto CMD settings for no data CMDs */ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); @@ -2103,7 +2105,7 @@ static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) return 0; } -static void sdhci_start_tuning(struct sdhci_host *host) +void sdhci_start_tuning(struct sdhci_host *host) { u16 ctrl; @@ -2126,14 +2128,16 @@ static void sdhci_start_tuning(struct sdhci_host *host) sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); } +EXPORT_SYMBOL_GPL(sdhci_start_tuning); -static void sdhci_end_tuning(struct sdhci_host *host) +void sdhci_end_tuning(struct sdhci_host *host) { sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } +EXPORT_SYMBOL_GPL(sdhci_end_tuning); -static void sdhci_reset_tuning(struct sdhci_host *host) +void sdhci_reset_tuning(struct sdhci_host *host) { u16 ctrl; @@ -2142,6 +2146,7 @@ static void sdhci_reset_tuning(struct sdhci_host *host) ctrl &= ~SDHCI_CTRL_EXEC_TUNING; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); } +EXPORT_SYMBOL_GPL(sdhci_reset_tuning); static void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode) { @@ -2162,7 +2167,7 @@ static void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode) * interrupt setup is different to other commands and there is no timeout * interrupt so special handling is needed. */ -static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode) +void sdhci_send_tuning(struct sdhci_host *host, u32 opcode) { struct mmc_host *mmc = host->mmc; struct mmc_command cmd = {}; @@ -2212,6 +2217,7 @@ static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode) msecs_to_jiffies(50)); } +EXPORT_SYMBOL_GPL(sdhci_send_tuning); static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) { @@ -3734,14 +3740,21 @@ int sdhci_setup_host(struct sdhci_host *host) mmc_gpio_get_cd(host->mmc) < 0) mmc->caps |= MMC_CAP_NEEDS_POLL; - /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ if (!IS_ERR(mmc->supply.vqmmc)) { ret = regulator_enable(mmc->supply.vqmmc); + + /* If vqmmc provides no 1.8V signalling, then there's no UHS */ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, 1950000)) host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + + /* In eMMC case vqmmc might be a fixed 1.8V regulator */ + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 2700000, + 3600000)) + host->flags &= ~SDHCI_SIGNALING_330; + if (ret) { pr_warn("%s: Failed to enable vqmmc regulator: %d\n", mmc_hostname(mmc), ret); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 23966f887da6..f0bd36ce3817 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -748,4 +748,9 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, void sdhci_dumpregs(struct sdhci_host *host); +void sdhci_start_tuning(struct sdhci_host *host); +void sdhci_end_tuning(struct sdhci_host *host); +void sdhci_reset_tuning(struct sdhci_host *host); +void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); + #endif /* __SDHCI_HW_H */ diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 8e7f3e35ee3d..568349e1fbc2 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1388,7 +1388,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev) MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ; if (host->cfg->clk_delays || host->use_new_timings) - mmc->caps |= MMC_CAP_1_8V_DDR; + mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; ret = mmc_of_parse(mmc); if (ret) @@ -1407,7 +1407,10 @@ static int sunxi_mmc_probe(struct platform_device *pdev) if (ret) goto error_free_dma; - dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq); + dev_info(&pdev->dev, "initialized, max. request size: %u KB%s\n", + mmc->max_req_size >> 10, + host->use_new_timings ? ", uses new timings mode" : ""); + return 0; error_free_dma: diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index e7d651352dc9..5d141f79e175 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -46,6 +46,7 @@ #define CTL_DMA_ENABLE 0xd8 #define CTL_RESET_SD 0xe0 #define CTL_VERSION 0xe2 +#define CTL_SDIF_MODE 0xe6 #define CTL_SDIO_REGS 0x100 #define CTL_CLK_AND_WAIT_CTL 0x138 #define CTL_RESET_SDIO 0x1e0 @@ -191,6 +192,11 @@ struct tmio_mmc_host { /* Tuning values: 1 for success, 0 for failure */ DECLARE_BITMAP(taps, BITS_PER_BYTE * sizeof(long)); unsigned int tap_num; + unsigned long tap_set; + + void (*prepare_hs400_tuning)(struct tmio_mmc_host *host); + void (*hs400_downgrade)(struct tmio_mmc_host *host); + void (*hs400_complete)(struct tmio_mmc_host *host); const struct tmio_mmc_dma_ops *dma_ops; }; diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 308029930304..261b4d62d2b1 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -199,6 +199,14 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, tmio_mmc_clk_stop(host); return; } + /* + * Both HS400 and HS200/SD104 set 200MHz, but some devices need to + * set 400MHz to distinguish the CPG settings in HS400. + */ + if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && + host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400 && + new_clock == 200000000) + new_clock = 400000000; if (host->clk_update) clock = host->clk_update(host, new_clock) / 512; @@ -209,8 +217,13 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, clock <<= 1; /* 1/1 clock is option */ - if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && ((clk >> 22) & 0x1)) - clk |= 0xff; + if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && + ((clk >> 22) & 0x1)) { + if (!(host->mmc->ios.timing == MMC_TIMING_MMC_HS400)) + clk |= 0xff; + else + clk &= ~0xff; + } if (host->set_clk_div) host->set_clk_div(host->pdev, (clk >> 22) & 1); @@ -309,7 +322,6 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, { struct mmc_data *data = host->data; int c = cmd->opcode; - u32 irq_mask = TMIO_MASK_CMD; switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; @@ -349,7 +361,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, c |= TRANSFER_READ; } - tmio_mmc_enable_mmc_irqs(host, irq_mask); + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); /* Fire off the command */ sd_ctrl_write32_as_16_and_16(host, CTL_ARG_REG, cmd->arg); @@ -805,8 +817,6 @@ static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode) host->prepare_tuning(host, i % host->tap_num); ret = mmc_send_tuning(mmc, opcode, NULL); - if (ret && ret != -EILSEQ) - goto out; if (ret == 0) set_bit(i, host->taps); @@ -1087,6 +1097,33 @@ static int tmio_multi_io_quirk(struct mmc_card *card, return blk_size; } +static int tmio_mmc_prepare_hs400_tuning(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (host->prepare_hs400_tuning) + host->prepare_hs400_tuning(host); + + return 0; +} + +static void tmio_mmc_hs400_downgrade(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (host->hs400_downgrade) + host->hs400_downgrade(host); +} + +static void tmio_mmc_hs400_complete(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (host->hs400_complete) + host->hs400_complete(host); +} + static const struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, @@ -1096,6 +1133,9 @@ static const struct mmc_host_ops tmio_mmc_ops = { .multi_io_quirk = tmio_multi_io_quirk, .hw_reset = tmio_mmc_hw_reset, .execute_tuning = tmio_mmc_execute_tuning, + .prepare_hs400_tuning = tmio_mmc_prepare_hs400_tuning, + .hs400_downgrade = tmio_mmc_hs400_downgrade, + .hs400_complete = tmio_mmc_hs400_complete, }; static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 91f92215ca74..77866214ab51 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -90,6 +90,9 @@ /* Some controllers have a CBSY bit */ #define TMIO_MMC_HAVE_CBSY BIT(11) +/* Some controllers that support HS400 use use 4 taps while others use 8. */ +#define TMIO_MMC_HAVE_4TAP_HS400 BIT(13) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 64300a48dcce..beed7121c781 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -146,6 +146,13 @@ struct mmc_host_ops { /* Prepare HS400 target operating frequency depending host driver */ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); + + /* Prepare for switching from HS400 to HS200 */ + void (*hs400_downgrade)(struct mmc_host *host); + + /* Complete selection of HS400 */ + void (*hs400_complete)(struct mmc_host *host); + /* Prepare enhanced strobe depending host driver */ void (*hs400_enhanced_strobe)(struct mmc_host *host, struct mmc_ios *ios); @@ -474,9 +481,6 @@ static inline void *mmc_priv(struct mmc_host *host) #define mmc_classdev(x) (&(x)->class_dev) #define mmc_hostname(x) (dev_name(&(x)->class_dev)) -int mmc_power_save_host(struct mmc_host *host); -int mmc_power_restore_host(struct mmc_host *host); - void mmc_detect_change(struct mmc_host *, unsigned long delay); void mmc_request_done(struct mmc_host *, struct mmc_request *); void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 3ffc27aaeeaf..897a87c4c827 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -144,7 +144,7 @@ static inline bool mmc_op_multi(u32 opcode) #define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ #define R1_ERASE_RESET (1 << 13) /* sr, c */ -#define R1_STATUS(x) (x & 0xFFFFE000) +#define R1_STATUS(x) (x & 0xFFF9A000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ #define R1_SWITCH_ERROR (1 << 7) /* sx, c */ diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 7daa78a2f342..640dec8b5b0c 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -34,7 +34,6 @@ enum cd_types { * @cd_gpio: gpio for card_detect interrupt * @wp_type: type of write_protect method (see wp_types enum above) * @cd_type: type of card_detect method (see cd_types enum above) - * @support_vsel: indicate it supports 1.8v switching */ struct esdhc_platform_data { @@ -43,7 +42,6 @@ struct esdhc_platform_data { enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; - bool support_vsel; unsigned int delay_line; unsigned int tuning_step; /* The delay cell steps in tuning procedure */ unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ |