diff options
| author |   Arnd Bergmann <arnd@arndb.de> | 2013-06-20 01:51:18 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-06-20 01:51:18 +0200 |
| commit | c3b693d1d63444afe4fbf809d8a311b63741e503 (patch) | |
| tree | 5c0c264203967f1524ac28645f0b5cea57b624bc | |
| parent | Merge tag 'integrator-pci-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc (diff) | |
| parent | ARM: u300: switch to using syscon regmap for board (diff) | |
| download | linux-dev-c3b693d1d63444afe4fbf809d8a311b63741e503.tar.xz linux-dev-c3b693d1d63444afe4fbf809d8a311b63741e503.zip | |
Merge tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc
From Linus Walleij:
Device Tree and Multiplatform support for U300:
- Add devicetree support to timer, pinctrl (probe), I2C block,
watchdog, DMA controller and clocks.
- Piecewise add a device tree containing all peripherals.
- Delete the ATAG boot path.
- Delete redundant platform data and board files.
- Convert to multiplatform.
* tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (40 commits)
ARM: u300: switch to using syscon regmap for board
ARM: u300: Update MMC configs for u300 defconfig
spi: pl022: use DMA by default when probing from DT
pinctrl: get rid of all platform data for coh901
ARM: u300: convert MMC/SD clock to device tree
ARM: u300: move the gated system controller clocks to DT
i2c: stu300: do not request a specific clock name
clk: move the U300 fixed and fixed-factor to DT
ARM: u300: remove register definition file
ARM: u300: add syscon node
ARM: u300 use module_spi_driver to register driver
ARM: u300: delete remnant machine headers
ARM: u300: convert to multiplatform
ARM: u300: localize <mach/u300-regs.h>
ARM: u300: delete <mach/irqs.h>
ARM: u300: delete <mach/hardware.h>
ARM: u300: push down syscon registers
ARM: u300: remove deps from debug macro
ARM: u300: move debugmacro to debug includes
ARM: u300: delete all static board data
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
40 files changed, 1786 insertions, 2219 deletions
diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt new file mode 100644 index 000000000000..69b5ab0b5f4b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ste-u300.txt @@ -0,0 +1,46 @@ +ST-Ericsson U300 Device Tree Bindings + +For various board the "board" node may contain specific properties +that pertain to this particular board, such as board-specific GPIOs +or board power regulator supplies. + +Required root node property: + +compatible="stericsson,u300"; + +Required node: syscon +This contains the system controller. +- compatible: must be "stericsson,u300-syscon". +- reg: the base address and size of the system controller. + +Boards with the U300 SoC include: + +S365 "Small Board U365": + +Required node: s365 +This contains the board-specific information. +- compatible: must be "stericsson,s365". +- vana15-supply: the regulator supplying the 1.5V to drive the + board. +- syscon: a pointer to the syscon node so we can acccess the + syscon registers to set the board as self-powered. + +Example: + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + syscon = <&syscon>; + }; + + syscon: syscon@c0011000 { + compatible = "stericsson,u300-syscon"; + reg = <0xc0011000 0x1000>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt new file mode 100644 index 000000000000..7cafcb98ead7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt @@ -0,0 +1,80 @@ +Clock bindings for ST-Ericsson U300 System Controller Clocks + +Bindings for the gated system controller clocks: + +Required properties: +- compatible: must be "stericsson,u300-syscon-clk" +- #clock-cells: must be <0> +- clock-type: specifies the type of clock: + 0 = slow clock + 1 = fast clock + 2 = rest/remaining clock +- clock-id: specifies the clock in the type range + +Optional properties: +- clocks: parent clock(s) + +The available clocks per type are as follows: + +Type: ID: Clock: +------------------- +0 0 Slow peripheral bridge clock +0 1 UART0 clock +0 4 GPIO clock +0 6 RTC clock +0 7 Application timer clock +0 8 Access timer clock + +1 0 Fast peripheral bridge clock +1 1 I2C bus 0 clock +1 2 I2C bus 1 clock +1 5 MMC interface peripheral (silicon) clock +1 6 SPI clock + +2 3 CPU clock +2 4 DMA controller clock +2 5 External Memory Interface (EMIF) clock +2 6 NAND flask interface clock +2 8 XGAM graphics engine clock +2 9 Shared External Memory Interface (SEMI) clock +2 10 AHB Subsystem Bridge clock +2 12 Interrupt controller clock + +Example: + +gpio_clk: gpio_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <4>; + clocks = <&slow_clk>; +}; + +gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + (...) + clocks = <&gpio_clk>; +}; + + +Bindings for the MMC/SD card clock: + +Required properties: +- compatible: must be "stericsson,u300-syscon-mclk" +- #clock-cells: must be <0> + +Optional properties: +- clocks: parent clock(s) + +mmc_mclk: mmc_mclk { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-mclk"; + clocks = <&mmc_pclk>; +}; + +mmcsd: mmcsd@c0001000 { + compatible = "arm,pl18x", "arm,primecell"; + clocks = <&mmc_pclk>, <&mmc_mclk>; + clock-names = "apb_pclk", "mclk"; + (...) +}; diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt new file mode 100644 index 000000000000..091ad057e9cf --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ste-coh901318.txt @@ -0,0 +1,32 @@ +ST-Ericsson COH 901 318 DMA Controller + +This is a DMA controller which has begun as a fork of the +ARM PL08x PrimeCell VHDL code. + +Required properties: +- compatible: should be "stericsson,coh901318" +- reg: register locations and length +- interrupts: the single DMA IRQ +- #dma-cells: must be set to <1>, as the channels on the + COH 901 318 are simple and identified by a single number +- dma-channels: the number of DMA channels handled + +Example: + +dmac: dma-controller@c00020000 { + compatible = "stericsson,coh901318"; + reg = <0xc0020000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <2>; + #dma-cells = <1>; + dma-channels = <40>; +}; + +Consumers example: + +uart0: serial@c0013000 { + compatible = "..."; + (...) + dmas = <&dmac 17 &dmac 18>; + dma-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt new file mode 100644 index 000000000000..fd665b44d767 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt @@ -0,0 +1,7 @@ +ST-Ericsson COH 901 571/3 GPIO controller + +Required properties: +- compatible: Compatible property value should be "stericsson,gpio-coh901" +- reg: Physical base address of the controller and length of memory mapped + region. +- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks. diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt new file mode 100644 index 000000000000..bd81a482634f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt @@ -0,0 +1,15 @@ +ST Microelectronics DDC I2C + +Required properties : +- compatible : Must be "st,ddci2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Examples : + diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt new file mode 100644 index 000000000000..9499bc8ee9e3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt @@ -0,0 +1,18 @@ +ST-Ericsson U300 apptimer + +Required properties: + +- compatible : should be "stericsson,u300-apptimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 4 interrupts; one for each subtimer. These + are, in order: OS (operating system), DD (device driver) both + adopted for EPOC/Symbian with two specific IRQs for these tasks, + then GP1 and GP2, which are general-purpose timers. + +Example: + +timer { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupts = <24 25 26 27>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt new file mode 100644 index 000000000000..8ffb88e39e76 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt @@ -0,0 +1,19 @@ +ST-Ericsson COH 901 327 Watchdog timer + +Required properties: +- compatible: must be "stericsson,coh901327". +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: the interrupt used for the watchdog timeout warning. + +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + +Example: + +watchdog: watchdog@c0012000 { + compatible = "stericsson,coh901327"; + reg = <0xc0012000 0x1000>; + interrupts = <3>; + timeout-sec = <60>; +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2ca6d73472b6..23f6aeeaed92 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -815,23 +815,6 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). -config ARCH_U300 - bool "ST-Ericsson U300 Series" - depends on MMU - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_TCM - select SPARSE_IRQ - help - Support for ST-Ericsson U300 series mobile platforms. - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -2045,7 +2028,7 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" - depends on !ZBOOT_ROM && !ARCH_U300 + depends on !ZBOOT_ROM help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d2b000a31b47..7ef6f145f964 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -482,6 +482,13 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. + config DEBUG_U300_UART + bool "Kernel low-level debugging messages via U300 UART0" + depends on ARCH_U300 + help + Say Y here if you want the debug print routines to direct + their output to the uart port on U300 devices. + config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -685,6 +692,7 @@ config DEBUG_LL_INCLUDE default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/u300.S" if DEBUG_U300_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3844ef27d7ba..f9eae2f0ae5d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -201,6 +201,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-pluto.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts new file mode 100644 index 000000000000..8a1032c1ffc9 --- /dev/null +++ b/arch/arm/boot/dts/ste-u300.dts @@ -0,0 +1,473 @@ +/* + * Device Tree for the ST-Ericsson U300 Machine and SoC + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk"; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory { + reg = <0x48000000 0x03c00000>; + }; + + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + syscon = <&syscon>; + }; + + syscon: syscon@c0011000 { + compatible = "stericsson,u300-syscon", "syscon"; + reg = <0xc0011000 0x1000>; + clk32: app_32_clk@32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + pll13: pll13@13M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + /* Slow bridge clocks under PLL13 */ + slow_clk: slow_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <0>; + clocks = <&pll13>; + }; + uart0_clk: uart0_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <1>; + clocks = <&slow_clk>; + }; + gpio_clk: gpio_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <4>; + clocks = <&slow_clk>; + }; + rtc_clk: rtc_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <6>; + clocks = <&slow_clk>; + }; + apptimer_clk: app_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <7>; + clocks = <&slow_clk>; + }; + acc_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <8>; + clocks = <&slow_clk>; + }; + pll208: pll208@208M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <208000000>; + }; + app208: app_208_clk@208M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll208>; + }; + cpu_clk@208M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <3>; + clocks = <&app208>; + }; + app104: app_104_clk@104M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll208>; + }; + semi_clk@104M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <9>; + clocks = <&app104>; + }; + app52: app_52_clk@52M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll208>; + }; + /* AHB subsystem clocks */ + ahb_clk: ahb_subsys_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <10>; + clocks = <&app52>; + }; + intcon_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <12>; + clocks = <&ahb_clk>; + }; + emif_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <5>; + clocks = <&ahb_clk>; + }; + dmac_clk: dmac_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <4>; + clocks = <&app52>; + }; + fsmc_clk: fsmc_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <6>; + clocks = <&app52>; + }; + xgam_clk: xgam_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <8>; + clocks = <&app52>; + }; + app26: app_26_clk@26M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&app52>; + }; + /* Fast bridge clocks */ + fast_clk: fast_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <0>; + clocks = <&app26>; + }; + i2c0_clk: i2c0_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <1>; + clocks = <&fast_clk>; + }; + i2c1_clk: i2c1_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <2>; + clocks = <&fast_clk>; + }; + mmc_pclk: mmc_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <5>; + clocks = <&fast_clk>; + }; + mmc_mclk: mmc_mclk { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-mclk"; + clocks = <&mmc_pclk>; + }; + spi_clk: spi_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <6>; + clocks = <&fast_clk>; + }; + }; + + timer: timer@c0014000 { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <24 25 26 27>; + clocks = <&apptimer_clk>; + }; + + gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + reg = <0xc0016000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <0 1 2 18 21 22 23>; + clocks = <&gpio_clk>; + interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@c0011000 { + compatible = "stericsson,pinctrl-u300"; + reg = <0xc0011000 0x1000>; + }; + + watchdog: watchdog@c0012000 { + compatible = "stericsson,coh901327"; + reg = <0xc0012000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <3>; + clocks = <&clk32>; + }; + + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; + + dmac: dma-controller@c00020000 { + compatible = "stericsson,coh901318"; + reg = <0xc0020000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <2>; + #dma-cells = <1>; + dma-channels = <40>; + clocks = <&dmac_clk>; + }; + + /* A NAND flash of 128 MiB */ + fsmc: flash@40000000 { + compatible = "stericsson,fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x9f800000 0x1000>, /* FSMC Register*/ + <0x80000000 0x4000>, /* NAND Base DATA */ + <0x80020000 0x4000>, /* NAND Base ADDR */ + <0x80010000 0x4000>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + nand-skip-bbtscan; + clocks = <&fsmc_clk>; + + partition@0 { + label = "boot records"; + reg = <0x0 0x20000>; + }; + partition@20000 { + label = "free"; + reg = <0x20000 0x7e0000>; + }; + partition@800000 { + label = "platform"; + reg = <0x800000 0xf800000>; + }; + }; + + i2c0: i2c@c0004000 { + compatible = "st,ddci2c"; + reg = <0xc0004000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <8>; + clocks = <&i2c0_clk>; + #address-cells = <1>; + #size-cells = <0>; + ab3100: ab3100@0x48 { + compatible = "stericsson,ab3100"; + reg = <0x48>; + interrupt-parent = <&vica>; + interrupts = <0>; /* EXT0 IRQ */ + ab3100-regulators { + compatible = "stericsson,ab3100-regulators"; + ab3100_ldo_a_reg: ab3100_ldo_a { + regulator-compatible = "ab3100_ldo_a"; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_c_reg: ab3100_ldo_c { + regulator-compatible = "ab3100_ldo_c"; + startup-delay-us = <200>; + }; + ab3100_ldo_d_reg: ab3100_ldo_d { + regulator-compatible = "ab3100_ldo_d"; + startup-delay-us = <200>; + }; + ab3100_ldo_e_reg: ab3100_ldo_e { + regulator-compatible = "ab3100_ldo_e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_f_reg: ab3100_ldo_f { + regulator-compatible = "ab3100_ldo_f"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + startup-delay-us = <600>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_g_reg: ab3100_ldo_g { + regulator-compatible = "ab3100_ldo_g"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2850000>; + startup-delay-us = <400>; + }; + ab3100_ldo_h_reg: ab3100_ldo_h { + regulator-compatible = "ab3100_ldo_h"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ldo_k_reg: ab3100_ldo_k { + regulator-compatible = "ab3100_ldo_k"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ext_reg: ab3100_ext { + regulator-compatible = "ab3100_ext"; + }; + ab3100_buck_reg: ab3100_buck { + regulator-compatible = "ab3100_buck"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c1: i2c@c0005000 { + compatible = "st,ddci2c"; + reg = <0xc0005000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <9>; + clocks = <&i2c1_clk>; + #address-cells = <1>; + #size-cells = <0>; + fwcam0: fwcam@0x10 { + reg = <0x10>; + }; + fwcam1: fwcam@0x5d { + reg = <0x5d>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: interrupt-controller@a0001000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0001000 0x20>; + }; + + vicb: interrupt-controller@a0002000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0002000 0x20>; + }; + + uart0: serial@c0013000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0013000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + clocks = <&uart0_clk>, <&uart0_clk>; + clock-names = "apb_pclk", "uart0_clk"; + dmas = <&dmac 17 &dmac 18>; + dma-names = "tx", "rx"; + }; + + uart1: serial@c0007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0007000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <20>; + dmas = <&dmac 38 &dmac 39>; + dma-names = "tx", "rx"; + }; + + mmcsd: mmcsd@c0001000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0xc0001000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <6 7>; + clocks = <&mmc_pclk>, <&mmc_mclk>; + clock-names = "apb_pclk", "mclk"; + max-frequency = <24000000>; + bus-width = <4>; // SD-card slot + mmc-cap-mmc-highspeed; + mmc-cap-sd-highspeed; + cd-gpios = <&gpio 12 0x4>; + cd-inverted; + vmmc-supply = <&ab3100_ldo_g_reg>; + dmas = <&dmac 14>; + dma-names = "rx"; + }; + + spi: ssp@c0006000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xc0006000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <23>; + clocks = <&spi_clk>, <&spi_clk>; + clock-names = "apb_pclk", "spi_clk"; + dmas = <&dmac 27 &dmac 28>; + dma-names = "tx", "rx"; + num-cs = <3>; + #address-cells = <1>; + #size-cells = <0>; + spi-dummy@1 { + compatible = "arm,pl022-dummy"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + }; +}; diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 374000ec4e4e..fd81a1b99cce 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,8 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y # CONFIG_AIO is not set @@ -11,12 +12,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_U300=y -CONFIG_MACH_U300=y -CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_SPIDUMMY=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -44,14 +42,15 @@ CONFIG_I2C=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_CLKGATE=y +CONFIG_MMC_UNSAFE_RESUME=y +# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -70,4 +69,3 @@ CONFIG_DEBUG_FS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/include/debug/u300.S index 8ae8e4ab34b0..6f04f08a203c 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/include/debug/u300.S @@ -1,14 +1,11 @@ /* - * - * arch-arm/mach-u300/include/mach/debug-macro.S - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2013 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * Debugging macro include header. * Author: Linus Walleij <linus.walleij@stericsson.com> */ -#include <mach/hardware.h> +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 .macro addruart, rp, rv, tmp /* If we move the address using MMU, use this. */ diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 1f597647d431..09f4dda01d5f 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,24 +1,46 @@ -if ARCH_U300 - menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" -config MACH_U300 - bool "U300" +config ARCH_U300 + bool "ST-Ericsson U300 Series" + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_PATCH_PHYS_VIRT + select ARM_VIC + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 + select SPARSE_IRQ + select MFD_SYSCON + select USE_OF + help + Support for ST-Ericsson U300 series mobile platforms. comment "ST-Ericsson U300/U335 Feature Selections" +config MACH_U300 + depends on ARCH_U300 + bool "U300" + default y + config U300_DEBUG + depends on ARCH_U300 bool "Debug support for U300" depends on PM help Debug support for U300 in sysfs, procfs etc. config MACH_U300_SPIDUMMY + depends on ARCH_U300 bool "SSP/SPI dummy chip" select SPI select SPI_MASTER @@ -31,5 +53,3 @@ config MACH_U300_SPIDUMMY SPI framework and ARM PL022 support. endmenu - -endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 5a86c58da396..0f362b64fb87 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,5 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o -obj-$(CONFIG_I2C_STU300) += i2c.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index a683d17b2ce4..4f7ac2a11452 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -9,46 +9,157 @@ * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/termios.h> -#include <linux/dmaengine.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/amba/serial.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> -#include <linux/platform_data/pinctrl-coh901.h> -#include <linux/platform_data/dma-coh901318.h> -#include <linux/irqchip/arm-vic.h> +#include <linux/irqchip.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> +#include <linux/clk.h> -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/syscon.h> -#include <mach/irqs.h> +/* + * These are the large blocks of memory allocated for I/O. + * the defines are used for setting up the I/O memory mapping. + */ + +/* NAND Flash CS0 */ +#define U300_NAND_CS0_PHYS_BASE 0x80000000 +/* NFIF */ +#define U300_NAND_IF_PHYS_BASE 0x9f800000 +/* ALE, CLE offset for FSMC NAND */ +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) +/* AHB Peripherals */ +#define U300_AHB_PER_PHYS_BASE 0xa0000000 +#define U300_AHB_PER_VIRT_BASE 0xff010000 +/* FAST Peripherals */ +#define U300_FAST_PER_PHYS_BASE 0xc0000000 +#define U300_FAST_PER_VIRT_BASE 0xff020000 +/* SLOW Peripherals */ +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 +/* Boot ROM */ +#define U300_BOOTROM_PHYS_BASE 0xffff0000 +#define U300_BOOTROM_VIRT_BASE 0xffff0000 +/* SEMI config base */ +#define U300_SEMI_CONFIG_BASE 0x2FFE0000 + +/* + * AHB peripherals + */ + +/* AHB Peripherals Bridge Controller */ +#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) +/* Vectored Interrupt Controller 0, servicing 32 interrupts */ +#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) +/* Vectored Interrupt Controller 1, servicing 32 interrupts */ +#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) +/* Memory Stick Pro (MSPRO) controller */ +#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) +/* EMIF Configuration Area */ +#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) + +/* + * FAST peripherals + */ + +/* FAST bridge control */ +#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) +/* MMC/SD controller */ +#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) +/* PCM I2S0 controller */ +#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) +/* PCM I2S1 controller */ +#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) +/* I2C0 controller */ +#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) +/* I2C1 controller */ +#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) +/* SPI controller */ +#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) +/* Fast UART1 on U335 only */ +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) + +/* + * SLOW peripherals + */ + +/* SLOW bridge control */ +#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) +/* SYSCON */ +#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) +/* Watchdog */ +#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) +/* UART0 */ +#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) +/* APP side special timer */ +#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) +/* Keypad */ +#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) +/* GPIO */ +#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) +/* RTC */ +#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +/* Bus tracer */ +#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) +/* Event handler (hardware queue) */ +#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) +/* Genric Timer */ +#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) +/* PPM */ +#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) + +/* + * REST peripherals + */ + +/* ISP (image signal processor) */ +#define U300_ISP_BASE (0xA0008000) +/* DMA Controller base */ +#define U300_DMAC_BASE (0xC0020000) +/* MSL Base */ +#define U300_MSL_BASE (0xc0022000) +/* APEX Base */ +#define U300_APEX_BASE (0xc0030000) +/* Video Encoder Base */ +#define U300_VIDEOENC_BASE (0xc0080000) +/* XGAM Base */ +#define U300_XGAM_BASE (0xd0000000) + +/* + * SYSCON addresses applicable to the core machine. + */ -#include "timer.h" -#include "spi.h" -#include "i2c.h" -#include "u300-gpio.h" +/* Chip ID register 16bit (R/-) */ +#define U300_SYSCON_CIDR (0x400) +/* SMCR */ +#define U300_SYSCON_SMCR (0x4d0) +#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) +#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) +#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) +#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) +/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ +#define U300_SYSCON_CSDR (0x4f0) +#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) +/* PRINT_CONTROL Print Control 16bit (R/-) */ +#define U300_SYSCON_PCR (0x4f8) +#define U300_SYSCON_PCR_SERV_IND (0x0001) +/* BOOT_CONTROL 16bit (R/-) */ +#define U300_SYSCON_BCR (0x4fc) +#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) +#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) +#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) +#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) + +static void __iomem *syscon_base; /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -82,365 +193,6 @@ static void __init u300_map_io(void) iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); } -/* - * Declaration of devices found on the U300 board and - * their respective memory locations. - */ - -static struct amba_pl011_data uart0_plat_data = { -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_UART0_RX, - .dma_tx_param = (void *) U300_DMA_UART0_TX, -#endif -}; - -/* Slow device at 0x3000 offset */ -static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, - { IRQ_U300_UART0 }, &uart0_plat_data); - -/* The U335 have an additional UART1 on the APP CPU */ -static struct amba_pl011_data uart1_plat_data = { -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_UART1_RX, - .dma_tx_param = (void *) U300_DMA_UART1_TX, -#endif -}; - -/* Fast device at 0x7000 offset */ -static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, - { IRQ_U300_UART1 }, &uart1_plat_data); - -/* AHB device at 0x4000 offset */ -static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); - -/* Fast device at 0x6000 offset */ -static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, - { IRQ_U300_SPI }, NULL); - -/* Fast device at 0x1000 offset */ -#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } - -static struct mmci_platform_data mmcsd_platform_data = { - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - .f_max = 24000000, - .gpio_wp = -1, - .gpio_cd = U300_GPIO_PIN_MMC_CD, - .cd_invert = true, - .capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX, - /* Don't specify a TX channel, this RX channel is bidirectional */ -#endif -}; - -static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, - U300_MMCSD_IRQS, &mmcsd_platform_data); - -/* - * The order of device declaration may be important, since some devices - * have dependencies on other devices being initialized first. - */ -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &pl022_device, - &pl172_device, - &mmcsd_device, -}; - -/* Here follows a list of all hw resources that the platform devices - * allocate. Note, clock dependencies are not included - */ - -static struct resource gpio_resources[] = { - { - .start = U300_GPIO_BASE, - .end = (U300_GPIO_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - { - .name = "gpio0", - .start = IRQ_U300_GPIO_PORT0, - .end = IRQ_U300_GPIO_PORT0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio1", - .start = IRQ_U300_GPIO_PORT1, - .end = IRQ_U300_GPIO_PORT1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio2", - .start = IRQ_U300_GPIO_PORT2, - .end = IRQ_U300_GPIO_PORT2, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio3", - .start = IRQ_U300_GPIO_PORT3, - .end = IRQ_U300_GPIO_PORT3, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio4", - .start = IRQ_U300_GPIO_PORT4, - .end = IRQ_U300_GPIO_PORT4, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio5", - .start = IRQ_U300_GPIO_PORT5, - .end = IRQ_U300_GPIO_PORT5, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio6", - .start = IRQ_U300_GPIO_PORT6, - .end = IRQ_U300_GPIO_PORT6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource keypad_resources[] = { - { - .start = U300_KEYPAD_BASE, - .end = U300_KEYPAD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "coh901461-press", - .start = IRQ_U300_KEYPAD_KEYBF, - .end = IRQ_U300_KEYPAD_KEYBF, - .flags = IORESOURCE_IRQ, - }, - { - .name = "coh901461-release", - .start = IRQ_U300_KEYPAD_KEYBR, - .end = IRQ_U300_KEYPAD_KEYBR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource rtc_resources[] = { - { - .start = U300_RTC_BASE, - .end = U300_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_RTC, - .end = IRQ_U300_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -/* - * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2) - * but these are not yet used by the driver. - */ -static struct resource fsmc_resources[] = { - { - .name = "nand_addr", - .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE, - .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "nand_cmd", - .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE, - .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "nand_data", - .start = U300_NAND_CS0_PHYS_BASE, - .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "fsmc_regs", - .start = U300_NAND_IF_PHYS_BASE, - .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource i2c0_resources[] = { - { - .start = U300_I2C0_BASE, - .end = U300_I2C0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C0, - .end = IRQ_U300_I2C0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = U300_I2C1_BASE, - .end = U300_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C1, - .end = IRQ_U300_I2C1, - .flags = IORESOURCE_IRQ, - }, - -}; - -static struct resource wdog_resources[] = { - { - .start = U300_WDOG_BASE, - .end = U300_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_WDOG, - .end = IRQ_U300_WDOG, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource dma_resource[] = { - { - .start = U300_DMAC_BASE, - .end = U300_DMAC_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_DMA, - .end = IRQ_U300_DMA, - .flags = IORESOURCE_IRQ, - } -}; - - -static struct resource pinctrl_resources[] = { - { - .start = U300_SYSCON_BASE, - .end = U300_SYSCON_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device wdog_device = { - .name = "coh901327_wdog", - .id = -1, - .num_resources = ARRAY_SIZE(wdog_resources), - .resource = wdog_resources, -}; - -static struct platform_device i2c0_device = { - .name = "stu300", - .id = 0, - .num_resources = ARRAY_SIZE(i2c0_resources), - .resource = i2c0_resources, -}; - -static struct platform_device i2c1_device = { - .name = "stu300", - .id = 1, - .num_resources = ARRAY_SIZE(i2c1_resources), - .resource = i2c1_resources, -}; - -static struct platform_device pinctrl_device = { - .name = "pinctrl-u300", - .id = -1, - .num_resources = ARRAY_SIZE(pinctrl_resources), - .resource = pinctrl_resources, -}; - -/* - * The different variants have a few different versions of the - * GPIO block, with different number of ports. - */ -static struct u300_gpio_platform u300_gpio_plat = { - .ports = 7, - .gpio_base = 0, -}; - -static struct platform_device gpio_device = { - .name = "u300-gpio", - .id = -1, - .num_resources = ARRAY_SIZE(gpio_resources), - .resource = gpio_resources, - .dev = { - .platform_data = &u300_gpio_plat, - }, -}; - -static struct platform_device keypad_device = { - .name = "keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; - -static struct platform_device rtc_device = { - .name = "rtc-coh901331", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static struct mtd_partition u300_partitions[] = { - { - .name = "bootrecords", - .offset = 0, - .size = SZ_128K, - }, - { - .name = "free", - .offset = SZ_128K, - .size = 8064 * SZ_1K, - }, - { - .name = "platform", - .offset = 8192 * SZ_1K, - .size = 253952 * SZ_1K, - }, -}; - -static struct fsmc_nand_platform_data nand_platform_data = { - .partitions = u300_partitions, - .nr_partitions = ARRAY_SIZE(u300_partitions), - .options = NAND_SKIP_BBTSCAN, - .width = FSMC_NAND_BW8, -}; - -static struct platform_device nand_device = { - .name = "fsmc-nand", - .id = -1, - .resource = fsmc_resources, - .num_resources = ARRAY_SIZE(fsmc_resources), - .dev = { - .platform_data = &nand_platform_data, - }, -}; - -static struct platform_device dma_device = { - .name = "coh901318", - .id = -1, - .resource = dma_resource, - .num_resources = ARRAY_SIZE(dma_resource), - .dev = { - .coherent_dma_mask = ~0, - }, -}; - static unsigned long pin_pullup_conf[] = { PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), }; @@ -467,61 +219,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = { pin_highz_conf), }; -/* - * Notice that AMBA devices are initialized before platform devices. - * - */ -static struct platform_device *platform_devs[] __initdata = { - &dma_device, - &i2c0_device, - &i2c1_device, - &keypad_device, - &rtc_device, - &pinctrl_device, - &gpio_device, - &nand_device, - &wdog_device, -}; - -/* - * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected - * together so some interrupts are connected to the first one and some - * to the second one. - */ -static void __init u300_init_irq(void) -{ - u32 mask[2] = {0, 0}; - struct clk *clk; - int i; - - /* initialize clocking early, we want to clock the INTCON */ - u300_clk_init(U300_SYSCON_VBASE); - - /* Bootstrap EMIF and SEMI clocks */ - clk = clk_get_sys("pl172", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - clk = clk_get_sys("semi", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - /* Clock the interrupt controller */ - clk = clk_get_sys("intcon", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - for (i = 0; i < U300_VIC_IRQS_END; i++) - set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, - mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, - mask[1], mask[1]); -} - - -/* - * U300 platforms peripheral handling - */ struct db_chip { u16 chipid; const char *name; @@ -578,7 +275,7 @@ static void __init u300_init_check_chip(void) const char unknown[] = "UNKNOWN"; /* Read out and print chip ID */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR); + val = readw(syscon_base + U300_SYSCON_CIDR); /* This is in funky bigendian order... */ val = (val & 0xFFU) << 8 | (val >> 8); chip = db_chips; @@ -600,74 +297,6 @@ static void __init u300_init_check_chip(void) } } -/* - * Some devices and their resources require reserved physical memory from - * the end of the available RAM. This function traverses the list of devices - * and assigns actual addresses to these. - */ -static void __init u300_assign_physmem(void) -{ - unsigned long curr_start = __pa(high_memory); - int i, j; - - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) { - for (j = 0; j < platform_devs[i]->num_resources; j++) { - struct resource *const res = - &platform_devs[i]->resource[j]; - - if (IORESOURCE_MEM == res->flags && - 0 == res->start) { - res->start = curr_start; - res->end += curr_start; - curr_start += resource_size(res); - - printk(KERN_INFO "core.c: Mapping RAM " \ - "%#x-%#x to device %s:%s\n", - res->start, res->end, - platform_devs[i]->name, res->name); - } - } - } -} - -static void __init u300_init_machine(void) -{ - int i; - u16 val; - - /* Check what platform we run and print some status information */ - u300_init_check_chip(); - - /* Initialize SPI device with some board specifics */ - u300_spi_init(&pl022_device); - - /* Register the AMBA devices in the AMBA bus abstraction layer */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - u300_assign_physmem(); - - /* Initialize pinmuxing */ - pinctrl_register_mappings(u300_pinmux_map, - ARRAY_SIZE(u300_pinmux_map)); - - /* Register subdevices on the I2C buses */ - u300_i2c_register_board_devices(); - - /* Register the platform devices */ - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - - /* Register subdevices on the SPI bus */ - u300_spi_register_board_devices(); - - /* Enable SEMI self refresh */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | - U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); -} - /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); @@ -688,13 +317,99 @@ static void u300_restart(char mode, const char *cmd) while (1); } -MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = 0x100, +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE, + "pinctrl-u300", NULL), + OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE, + "u300-gpio", NULL), + OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE, + "coh901327_wdog", NULL), + OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE, + "rtc-coh901331", NULL), + OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE, + "coh901318", NULL), + OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE, + "fsmc-nand", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE, + "uart1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE, + "pl022", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE, + "stu300.0", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE, + "stu300.1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE, + "mmci", NULL), + { /* sentinel */ }, +}; + +static void __init u300_init_irq_dt(void) +{ + struct device_node *syscon; + struct clk *clk; + + syscon = of_find_node_by_path("/syscon@c0011000"); + if (!syscon) { + pr_crit("could not find syscon node\n"); + return; + } + syscon_base = of_iomap(syscon, 0); + if (!syscon_base) { + pr_crit("could not remap syscon\n"); + return; + } + /* initialize clocking early, we want to clock the INTCON */ + u300_clk_init(syscon_base); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + /* Clock the interrupt controller */ + clk = clk_get_sys("intcon", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + irqchip_init(); +} + +static void __init u300_init_machine_dt(void) +{ + u16 val; + + /* Check what platform we run and print some status information */ + u300_init_check_chip(); + + /* Initialize pinmuxing */ + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); + + of_platform_populate(NULL, of_default_bus_match_table, + u300_auxdata_lookup, NULL); + + /* Enable SEMI self refresh */ + val = readw(syscon_base + U300_SYSCON_SMCR) | + U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; + writew(val, syscon_base + U300_SYSCON_SMCR); +} + +static const char * u300_board_compat[] = { + "stericsson,u300", + NULL, +}; + +DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") .map_io = u300_map_io, - .nr_irqs = 0, - .init_irq = u300_init_irq, - .init_time = u300_timer_init, - .init_machine = u300_init_machine, + .init_irq = u300_init_irq_dt, + .init_time = clocksource_of_init, + .init_machine = u300_init_machine_dt, .restart = u300_restart, + .dt_compat = u300_board_compat, MACHINE_END diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 2785cb67b5e8..ec0283cf9a32 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -263,28 +263,22 @@ static int pl022_dummy_remove(struct spi_device *spi) return 0; } +static const struct of_device_id pl022_dummy_dt_match[] = { + { .compatible = "arm,pl022-dummy" }, + {}, +}; + static struct spi_driver pl022_dummy_driver = { .driver = { .name = "spi-dummy", .owner = THIS_MODULE, + .of_match_table = pl022_dummy_dt_match, }, .probe = pl022_dummy_probe, .remove = pl022_dummy_remove, }; -static int __init pl022_init_dummy(void) -{ - return spi_register_driver(&pl022_dummy_driver); -} - -static void __exit pl022_exit_dummy(void) -{ - spi_unregister_driver(&pl022_dummy_driver); -} - -module_init(pl022_init_dummy); -module_exit(pl022_exit_dummy); - +module_spi_driver(pl022_dummy_driver); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver"); MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c deleted file mode 100644 index 96800aa1316d..000000000000 --- a/arch/arm/mach-u300/i2c.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.c - * - * Copyright (C) 2009-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/mfd/ab3100.h> -#include <linux/regulator/machine.h> -#include <linux/amba/bus.h> -#include <mach/irqs.h> - -/* - * Initial settings of ab3100 registers. - * Common for below LDO regulator settings are that - * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). - * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. - */ - -/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ -#define LDO_A_SETTING 0x16 -/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_C_SETTING 0x10 -/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ -#define LDO_D_SETTING 0x10 -/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_E_SETTING 0x10 -/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ -#define LDO_E_SLEEP_SETTING 0x00 -/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_F_SETTING 0xD0 -/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_G_SETTING 0x00 -/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ -#define LDO_H_SETTING 0x18 -/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_K_SETTING 0x00 -/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ -#define LDO_EXT_SETTING 0x00 -/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ -#define BUCK_SETTING 0x7D -/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ -#define BUCK_SLEEP_SETTING 0xAC - -#ifdef CONFIG_AB3100_CORE -static struct regulator_consumer_supply supply_ldo_c[] = { - { - .dev_name = "ab3100-codec", - .supply = "vaudio", /* Powers the codec */ - }, -}; - -/* - * This one needs to be a supply so we can turn it off - * in order to shut down the system. - */ -static struct regulator_consumer_supply supply_ldo_d[] = { - { - .supply = "vana15", /* Powers the SoC (CPU etc) */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_g[] = { - { - .dev_name = "mmci", - .supply = "vmmc", /* Powers MMC/SD card */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_h[] = { - { - .dev_name = "xgam_pdi", - .supply = "vdisp", /* Powers camera, display etc */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_k[] = { - { - .dev_name = "irda", - .supply = "vir", /* Power IrDA */ - }, -}; - -/* - * This is a placeholder for whoever wish to use the - * external power. - */ -static struct regulator_consumer_supply supply_ldo_ext[] = { - { - .supply = "vext", /* External power */ - }, -}; - -/* Preset (hardware defined) voltages for these regulators */ -#define LDO_A_VOLTAGE 2750000 -#define LDO_C_VOLTAGE 2650000 -#define LDO_D_VOLTAGE 2650000 - -static struct ab3100_platform_data ab3100_plf_data = { - .reg_constraints = { - /* LDO A routing and constraints */ - { - .constraints = { - .name = "vrad", - .min_uV = LDO_A_VOLTAGE, - .max_uV = LDO_A_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO C routing and constraints */ - { - .constraints = { - .min_uV = LDO_C_VOLTAGE, - .max_uV = LDO_C_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c), - .consumer_supplies = supply_ldo_c, - }, - /* LDO D routing and constraints */ - { - .constraints = { - .min_uV = LDO_D_VOLTAGE, - .max_uV = LDO_D_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - /* - * Actually this is boot_on but we need - * to reference count it externally to - * be able to shut down the system. - */ - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d), - .consumer_supplies = supply_ldo_d, - }, - /* LDO E routing and constraints */ - { - .constraints = { - .name = "vio", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO F routing and constraints */ - { - .constraints = { - .name = "vana25", - .min_uV = 2500000, - .max_uV = 2500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO G routing and constraints */ - { - .constraints = { - .min_uV = 1500000, - .max_uV = 2850000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g), - .consumer_supplies = supply_ldo_g, - }, - /* LDO H routing and constraints */ - { - .constraints = { - .min_uV = 1200000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h), - .consumer_supplies = supply_ldo_h, - }, - /* LDO K routing and constraints */ - { - .constraints = { - .min_uV = 1800000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k), - .consumer_supplies = supply_ldo_k, - }, - /* External regulator interface. No fixed voltage specified. - * If we knew the voltage of the external regulator and it - * was connected on the board, we could add the (fixed) - * voltage for it here. - */ - { - .constraints = { - .min_uV = 0, - .max_uV = 0, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext), - .consumer_supplies = supply_ldo_ext, - }, - /* Buck converter routing and constraints */ - { - .constraints = { - .name = "vcore", - .min_uV = 1200000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - }, - }, - .reg_initvals = { - LDO_A_SETTING, - LDO_C_SETTING, - LDO_E_SETTING, - LDO_E_SLEEP_SETTING, - LDO_F_SETTING, - LDO_G_SETTING, - LDO_H_SETTING, - LDO_K_SETTING, - LDO_EXT_SETTING, - BUCK_SETTING, - BUCK_SLEEP_SETTING, - LDO_D_SETTING, - }, -}; -#endif - -static struct i2c_board_info __initdata bus0_i2c_board_info[] = { -#ifdef CONFIG_AB3100_CORE - { - .type = "ab3100", - .addr = 0x48, - .irq = IRQ_U300_IRQ0_EXT, - .platform_data = &ab3100_plf_data, - }, -#else - { }, -#endif -}; - -static struct i2c_board_info __initdata bus1_i2c_board_info[] = { - { - .type = "fwcam", - .addr = 0x10, - }, - { - .type = "fwcam", - .addr = 0x5d, - }, -}; - -void __init u300_i2c_register_board_devices(void) -{ - i2c_register_board_info(0, bus0_i2c_board_info, - ARRAY_SIZE(bus0_i2c_board_info)); - /* - * This makes the core shut down all unused regulators - * after all the initcalls have completed. - */ - regulator_has_full_constraints(); - i2c_register_board_info(1, bus1_i2c_board_info, - ARRAY_SIZE(bus1_i2c_board_info)); -} diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h deleted file mode 100644 index 485c02e5c06d..000000000000 --- a/arch/arm/mach-u300/i2c.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef MACH_U300_I2C_H -#define MACH_U300_I2C_H - -#ifdef CONFIG_I2C_STU300 -void __init u300_i2c_register_board_devices(void); -#else -/* Compile out this stuff if no I2C adapter is available */ -static inline void __init u300_i2c_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h deleted file mode 100644 index b99d4ce0ac2b..000000000000 --- a/arch/arm/mach-u300/include/mach/hardware.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/hardware.h - */ -#include <asm/sizes.h> -#include <mach/u300-regs.h> diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h deleted file mode 100644 index 21d5e76a6cd3..000000000000 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/irqs.h - * - * - * Copyright (C) 2006-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * IRQ channel definitions for the U300 platforms. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_U300_INTCON0_START 32 -#define IRQ_U300_INTCON1_START 64 -/* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 32 -#define IRQ_U300_IRQ1_EXT 33 -#define IRQ_U300_DMA 34 -#define IRQ_U300_VIDEO_ENC_0 35 -#define IRQ_U300_VIDEO_ENC_1 36 -#define IRQ_U300_AAIF_RX 37 -#define IRQ_U300_AAIF_TX 38 -#define IRQ_U300_AAIF_VGPIO 39 -#define IRQ_U300_AAIF_WAKEUP 40 -#define IRQ_U300_PCM_I2S0_FRAME 41 -#define IRQ_U300_PCM_I2S0_FIFO 42 -#define IRQ_U300_PCM_I2S1_FRAME 43 -#define IRQ_U300_PCM_I2S1_FIFO 44 -#define IRQ_U300_XGAM_GAMCON 45 -#define IRQ_U300_XGAM_CDI 46 -#define IRQ_U300_XGAM_CDICON 47 -#define IRQ_U300_XGAM_PDI 49 -#define IRQ_U300_XGAM_PDICON 50 -#define IRQ_U300_XGAM_GAMEACC 51 -#define IRQ_U300_XGAM_MCIDCT 52 -#define IRQ_U300_APEX 53 -#define IRQ_U300_UART0 54 -#define IRQ_U300_SPI 55 -#define IRQ_U300_TIMER_APP_OS 56 -#define IRQ_U300_TIMER_APP_DD 57 -#define IRQ_U300_TIMER_APP_GP1 58 -#define IRQ_U300_TIMER_APP_GP2 59 -#define IRQ_U300_TIMER_OS 60 -#define IRQ_U300_TIMER_MS 61 -#define IRQ_U300_KEYPAD_KEYBF 62 -#define IRQ_U300_KEYPAD_KEYBR 63 -/* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 64 -#define IRQ_U300_GPIO_PORT1 65 -#define IRQ_U300_GPIO_PORT2 66 - -/* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 67 -#define IRQ_U300_EVHIST 68 -#define IRQ_U300_MSPRO 69 -#define IRQ_U300_MMCSD_MCIINTR0 70 -#define IRQ_U300_MMCSD_MCIINTR1 71 -#define IRQ_U300_I2C0 72 -#define IRQ_U300_I2C1 73 -#define IRQ_U300_RTC 74 -#define IRQ_U300_NFIF 75 -#define IRQ_U300_NFIF2 76 - -/* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 77 -#define IRQ_U300_ISP_F1 78 -#define IRQ_U300_ISP_F2 79 -#define IRQ_U300_ISP_F3 80 -#define IRQ_U300_ISP_F4 81 -#define IRQ_U300_GPIO_PORT3 82 -#define IRQ_U300_SYSCON_PLL_LOCK 83 -#define IRQ_U300_UART1 84 -#define IRQ_U300_GPIO_PORT4 85 -#define IRQ_U300_GPIO_PORT5 86 -#define IRQ_U300_GPIO_PORT6 87 -#define U300_VIC_IRQS_END 88 - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h deleted file mode 100644 index 10bdd0be9774..000000000000 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ /dev/null @@ -1,592 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/syscon.h - * - * - * Copyright (C) 2008-2012 ST-Ericsson AB - * - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - */ - -#ifndef __MACH_SYSCON_H -#define __MACH_SYSCON_H - -/* - * All register defines for SYSCON registers that concerns individual - * block clocks and reset lines are registered here. This is because - * we don't want any other file to try to fool around with this stuff. - */ - -/* APP side SYSCON registers */ -/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */ -/* CLK Control Register 16bit (R/W) */ -#define U300_SYSCON_CCR (0x0000) -#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) -#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) -#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) -/* CLK Status Register 16bit (R/W) */ -#define U300_SYSCON_CSR (0x0004) -#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) -#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) -/* Reset lines for SLOW devices 16bit (R/W) */ -#define U300_SYSCON_RSR (0x0014) -#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) -#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) -#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) -#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) -#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) -#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) -#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) -#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) -#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) -/* Reset lines for FAST devices 16bit (R/W) */ -#define U300_SYSCON_RFR (0x0018) -#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) -#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) -#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) -#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) -#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) -#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) -#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) -/* Reset lines for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_RRR (0x001c) -#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) -#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) -#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) -#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) -#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) -#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) -#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) -#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) -#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) -#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) -#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) -#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) -/* Clock enable for SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CESR (0x0020) -#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) -#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) -#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) -#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) -#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) -#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) -#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) -#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) -/* Clock enable for FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CEFR (0x0024) -#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) -#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) -#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) -#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) -#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) -/* Clock enable for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CERR (0x0028) -#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) -#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) -#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) -#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) -#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) -#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) -#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) -#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) -#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) -#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) -#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) -#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) -#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) -/* Single block clock enable 16bit (-/W) */ -#define U300_SYSCON_SBCER (0x002c) -#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) -#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) -#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) -#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) -#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) -#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) -#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) -#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) -#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) -#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) -#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) -#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) -#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) -#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) -#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) -#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) -#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) -#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) -#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) -#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) -#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) -#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) -#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) -#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) -#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) -#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) -#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) -#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) -/* Single block clock disable 16bit (-/W) */ -#define U300_SYSCON_SBCDR (0x0030) -/* Same values as above for SBCER */ -/* Clock force SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CFSR (0x003c) -#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) -/* Clock force FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CFFR (0x40) -/* Values not defined. Define if you want to use them. */ -/* Clock force the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CFRR (0x44) -#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) -#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) -#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) -#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) -#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) -#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) -/* PLL208 Frequency Control 16bit (R/W) */ -#define U300_SYSCON_PFCR (0x48) -#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) -/* Power Management Control 16bit (R/W) */ -#define U300_SYSCON_PMCR (0x50) -#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) -#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) -/* - * All other clocking registers moved to clock.c! - */ -/* Reset Out 16bit (R/W) */ -#define U300_SYSCON_RCR (0x6c) -#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) -/* EMIF Slew Rate Control 16bit (R/W) */ -#define U300_SYSCON_SRCLR (0x70) -#define U300_SYSCON_SRCLR_MASK (0x03FF) -#define U300_SYSCON_SRCLR_VALUE (0x03FF) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) -/* EMIF Clock Control Register 16bit (R/W) */ -#define U300_SYSCON_ECCR (0x0078) -#define U300_SYSCON_ECCR_MASK (0x000F) -#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) -#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) -#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) -#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) -/* Step one for killing the applications system 16bit (-/W) */ -#define U300_SYSCON_KA1R (0x0080) -#define U300_SYSCON_KA1R_MASK (0xFFFF) -#define U300_SYSCON_KA1R_VALUE (0xFFFF) -/* Step two for killing the application system 16bit (-/W) */ -#define U300_SYSCON_KA2R (0x0084) -#define U300_SYSCON_KA2R_MASK (0xFFFF) -#define U300_SYSCON_KA2R_VALUE (0xFFFF) -/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ -#define U300_SYSCON_MMF0R (0x90) -#define U300_SYSCON_MMF0R_MASK (0x00FF) -#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) -/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ -#define U300_SYSCON_MMF1R (0x94) -#define U300_SYSCON_MMF1R_MASK (0x00FF) -#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) -/* AAIF control register 16 bit (R/W) */ -#define U300_SYSCON_AAIFCR (0x98) -#define U300_SYSCON_AAIFCR_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001) -#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002) -#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003) -/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ -#define U300_SYSCON_MMCR (0x9C) -#define U300_SYSCON_MMCR_MASK (0x0003) -#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) -#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) -/* Pull up/down control (R/W) */ -#define U300_SYSCON_PUCR (0x104) -#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200) -#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100) -#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) -#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) -#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) -/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ -#define U300_SYSCON_S0CCR (0x120) -#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ -#define U300_SYSCON_S1CCR (0x124) -#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ -#define U300_SYSCON_S2CCR (0x128) -#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) -#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) -#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */ -#define U300_SYSCON_MCR (0x12c) -#define U300_SYSCON_MCR_FIELD_MASK (0x00FF) -#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040) -#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010) -#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020) -#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) -#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) -#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) -/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ -#define U300_SYSCON_PICR (0x0130) -#define U300_SYSCON_PICR_MASK (0x00FF) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) -#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) -#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) -#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) -#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) -/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ -#define U300_SYSCON_PISR (0x0134) -#define U300_SYSCON_PISR_MASK (0x000F) -#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) -#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) -#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) -#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) -/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ -#define U300_SYSCON_PICLR (0x0138) -#define U300_SYSCON_PICLR_MASK (0x000F) -#define U300_SYSCON_PICLR_RWMASK (0x0000) -#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) -#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) -#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) -#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) -/* CAMIF_CONTROL 16 bit (-/W) */ -#define U300_SYSCON_CICR (0x013C) -#define U300_SYSCON_CICR_MASK (0x0FFF) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003) -/* Clock activity observability register 0 */ -#define U300_SYSCON_C0OAR (0x140) -#define U300_SYSCON_C0OAR_MASK (0xFFFF) -#define U300_SYSCON_C0OAR_VALUE (0xFFFF) -#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) -#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) -#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) -#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) -#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) -#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) -#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) -#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) -#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) -#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) -#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) -#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) -#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) -#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) -#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) -#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) -/* Clock activity observability register 1 */ -#define U300_SYSCON_C1OAR (0x144) -#define U300_SYSCON_C1OAR_MASK (0x3FFE) -#define U300_SYSCON_C1OAR_VALUE (0x3FFE) -#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) -#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) -#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) -#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) -#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) -#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) -#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) -#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) -#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) -#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) -#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) -#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) -#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) -/* Clock activity observability register 2 */ -#define U300_SYSCON_C2OAR (0x148) -#define U300_SYSCON_C2OAR_MASK (0x0FFF) -#define U300_SYSCON_C2OAR_VALUE (0x0FFF) -#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) -#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) -#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) -#define U300_SYSCON_C2OAR_VC_CLK (0x0100) -#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) -#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) -#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) -#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) -#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) -#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) -#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) -#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) - -/* Chip ID register 16bit (R/-) */ -#define U300_SYSCON_CIDR (0x400) -/* Video IRQ clear 16bit (R/W) */ -#define U300_SYSCON_VICR (0x404) -#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002) -#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001) -/* SMCR */ -#define U300_SYSCON_SMCR (0x4d0) -#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) -#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) -#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) -#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) -/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ -#define U300_SYSCON_CSDR (0x4f0) -#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) -/* PRINT_CONTROL Print Control 16bit (R/-) */ -#define U300_SYSCON_PCR (0x4f8) -#define U300_SYSCON_PCR_SERV_IND (0x0001) -/* BOOT_CONTROL 16bit (R/-) */ -#define U300_SYSCON_BCR (0x4fc) -#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) -#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) -#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) -#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) - - -/* CPU clock defines */ -/** - * CPU high frequency in MHz - */ -#define SYSCON_CPU_CLOCK_HIGH 208 -/** - * CPU medium frequency in MHz - */ -#define SYSCON_CPU_CLOCK_MEDIUM 52 -/** - * CPU low frequency in MHz - */ -#define SYSCON_CPU_CLOCK_LOW 13 - -/* EMIF clock defines */ -/** - * EMIF high frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_HIGH 104 -/** - * EMIF medium frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_MEDIUM 52 -/** - * EMIF low frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_LOW 13 - -/* AHB clock defines */ -/** - * AHB high frequency in MHz - */ -#define SYSCON_AHB_CLOCK_HIGH 52 -/** - * AHB medium frequency in MHz - */ -#define SYSCON_AHB_CLOCK_MEDIUM 26 -/** - * AHB low frequency in MHz - */ -#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */ - -enum syscon_busmaster { - SYSCON_BM_DMAC, - SYSCON_BM_XGAM, - SYSCON_BM_VIDEO_ENC -}; - -/* Selectr a resistor or a set of resistors */ -enum syscon_pull_up_down { - SYSCON_PU_KEY_IN_EN, - SYSCON_PU_EMIF_1_8_BIT_EN, - SYSCON_PU_EMIF_1_16_BIT_EN, - SYSCON_PU_EMIF_1_NFIF_READY_EN, - SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN, -}; - -/* - * Note that this array must match the order of the array "clk_reg" - * in syscon.c - */ -enum syscon_clk { - SYSCON_CLKCONTROL_SLOW_BRIDGE, - SYSCON_CLKCONTROL_UART, - SYSCON_CLKCONTROL_BTR, - SYSCON_CLKCONTROL_EH, - SYSCON_CLKCONTROL_GPIO, - SYSCON_CLKCONTROL_KEYPAD, - SYSCON_CLKCONTROL_APP_TIMER, - SYSCON_CLKCONTROL_ACC_TIMER, - SYSCON_CLKCONTROL_FAST_BRIDGE, - SYSCON_CLKCONTROL_I2C0, - SYSCON_CLKCONTROL_I2C1, - SYSCON_CLKCONTROL_I2S0, - SYSCON_CLKCONTROL_I2S1, - SYSCON_CLKCONTROL_MMC, - SYSCON_CLKCONTROL_SPI, - SYSCON_CLKCONTROL_I2S0_CORE, - SYSCON_CLKCONTROL_I2S1_CORE, - SYSCON_CLKCONTROL_UART1, - SYSCON_CLKCONTROL_AAIF, - SYSCON_CLKCONTROL_AHB, - SYSCON_CLKCONTROL_APEX, - SYSCON_CLKCONTROL_CPU, - SYSCON_CLKCONTROL_DMA, - SYSCON_CLKCONTROL_EMIF, - SYSCON_CLKCONTROL_NAND_IF, - SYSCON_CLKCONTROL_VIDEO_ENC, - SYSCON_CLKCONTROL_XGAM, - SYSCON_CLKCONTROL_SEMI, - SYSCON_CLKCONTROL_AHB_SUBSYS, - SYSCON_CLKCONTROL_MSPRO -}; - -enum syscon_sysclk_mode { - SYSCON_SYSCLK_DISABLED, - SYSCON_SYSCLK_M_CLK, - SYSCON_SYSCLK_ACC_FSM, - SYSCON_SYSCLK_PLL60_48, - SYSCON_SYSCLK_PLL60_60, - SYSCON_SYSCLK_ACC_PLL208, - SYSCON_SYSCLK_APP_PLL13, - SYSCON_SYSCLK_APP_FSM, - SYSCON_SYSCLK_RTC, - SYSCON_SYSCLK_APP_PLL208 -}; - -enum syscon_sysclk_req { - SYSCON_SYSCLKREQ_DISABLED, - SYSCON_SYSCLKREQ_ACTIVE_LOW, - SYSCON_SYSCLKREQ_MONITOR -}; - -enum syscon_clk_mode { - SYSCON_CLKMODE_OFF, - SYSCON_CLKMODE_DEFAULT, - SYSCON_CLKMODE_LOW, - SYSCON_CLKMODE_MEDIUM, - SYSCON_CLKMODE_HIGH, - SYSCON_CLKMODE_PERMANENT, - SYSCON_CLKMODE_ON, -}; - -enum syscon_call_mode { - SYSCON_CLKCALL_NOWAIT, - SYSCON_CLKCALL_WAIT, -}; - -int syscon_dc_on(bool keep_power_on); -int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster, - bool active); -bool syscon_get_busmaster_active_state(void); -int syscon_set_sleep_mask(enum syscon_clk, - bool sleep_ctrl); -int syscon_config_sysclk(u32 sysclk, - enum syscon_sysclk_mode sysclkmode, - bool inverse, - u32 divisor, - enum syscon_sysclk_req sysclkreq); -bool syscon_can_turn_off_semi_clock(void); - -/* This function is restricted to core.c */ -int syscon_request_normal_power(bool req); - -/* This function is restricted to be used by platform_speed.c */ -int syscon_speed_request(enum syscon_call_mode wait_mode, - enum syscon_clk_mode req_clk_mode); -#endif /* __MACH_SYSCON_H */ diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h deleted file mode 100644 index f233b72633f6..000000000000 --- a/arch/arm/mach-u300/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/timex.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform tick rate definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -/* This is for the APP OS GP1 (General Purpose 1) timer */ -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h deleted file mode 100644 index 0320495efc4d..000000000000 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/u300-regs.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic register address definitions in physical memory and - * some block definitions for core devices like the timer. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_REGS_H -#define __MACH_U300_REGS_H - -/* - * These are the large blocks of memory allocated for I/O. - * the defines are used for setting up the I/O memory mapping. - */ - -/* NAND Flash CS0 */ -#define U300_NAND_CS0_PHYS_BASE 0x80000000 - -/* NFIF */ -#define U300_NAND_IF_PHYS_BASE 0x9f800000 - -/* ALE, CLE offset for FSMC NAND */ -#define PLAT_NAND_CLE (1 << 16) -#define PLAT_NAND_ALE (1 << 17) - -/* AHB Peripherals */ -#define U300_AHB_PER_PHYS_BASE 0xa0000000 -#define U300_AHB_PER_VIRT_BASE 0xff010000 - -/* FAST Peripherals */ -#define U300_FAST_PER_PHYS_BASE 0xc0000000 -#define U300_FAST_PER_VIRT_BASE 0xff020000 - -/* SLOW Peripherals */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 - -/* Boot ROM */ -#define U300_BOOTROM_PHYS_BASE 0xffff0000 -#define U300_BOOTROM_VIRT_BASE 0xffff0000 - -/* SEMI config base */ -#define U300_SEMI_CONFIG_BASE 0x2FFE0000 - -/* - * AHB peripherals - */ - -/* AHB Peripherals Bridge Controller */ -#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) - -/* Vectored Interrupt Controller 0, servicing 32 interrupts */ -#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) - -/* Vectored Interrupt Controller 1, servicing 32 interrupts */ -#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) - -/* Memory Stick Pro (MSPRO) controller */ -#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) - -/* EMIF Configuration Area */ -#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) - - -/* - * FAST peripherals - */ - -/* FAST bridge control */ -#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) - -/* MMC/SD controller */ -#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) - -/* PCM I2S0 controller */ -#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) - -/* PCM I2S1 controller */ -#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) - -/* I2C0 controller */ -#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) - -/* I2C1 controller */ -#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) - -/* SPI controller */ -#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) - -/* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) - -/* - * SLOW peripherals - */ - -/* SLOW bridge control */ -#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) - -/* SYSCON */ -#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) - -/* Watchdog */ -#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) - -/* UART0 */ -#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) - -/* APP side special timer */ -#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) - -/* Keypad */ -#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) - -/* GPIO */ -#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) - -/* RTC */ -#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) - -/* Bus tracer */ -#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) - -/* Event handler (hardware queue) */ -#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) - -/* Genric Timer */ -#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) - -/* PPM */ -#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) - - -/* - * REST peripherals - */ - -/* ISP (image signal processor) */ -#define U300_ISP_BASE (0xA0008000) - -/* DMA Controller base */ -#define U300_DMAC_BASE (0xC0020000) - -/* MSL Base */ -#define U300_MSL_BASE (0xc0022000) - -/* APEX Base */ -#define U300_APEX_BASE (0xc0030000) - -/* Video Encoder Base */ -#define U300_VIDEOENC_BASE (0xc0080000) - -/* XGAM Base */ -#define U300_XGAM_BASE (0xd0000000) - -#endif diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h deleted file mode 100644 index 783e7e60101b..000000000000 --- a/arch/arm/mach-u300/include/mach/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C) -#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030) -#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c index 9c53f01c62eb..bf40cd478fe9 100644 --- a/arch/arm/mach-u300/regulator.c +++ b/arch/arm/mach-u300/regulator.c @@ -10,11 +10,18 @@ #include <linux/device.h> #include <linux/signal.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> -/* Those are just for writing in syscon */ -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/syscon.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) /* * Regulators that power the board and chip and which are @@ -47,13 +54,28 @@ void u300_pm_poweroff(void) /* * Hog the regulators needed to power up the board. */ -static int __init u300_init_boardpower(void) +static int __init __u300_init_boardpower(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct device_node *syscon_np; + struct regmap *regmap; int err; - u32 val; pr_info("U300: setting up board power\n"); - main_power_15 = regulator_get(NULL, "vana15"); + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + pr_crit("U300: no syscon node\n"); + return -ENODEV; + } + regmap = syscon_node_to_regmap(syscon_np); + if (!regmap) { + pr_crit("U300: could not locate syscon regmap\n"); + return -ENODEV; + } + + main_power_15 = regulator_get(&pdev->dev, "vana15"); + if (IS_ERR(main_power_15)) { pr_err("could not get vana15"); return PTR_ERR(main_power_15); @@ -72,9 +94,8 @@ static int __init u300_init_boardpower(void) * the rest of the U300 power management is implemented. */ pr_info("U300: disable system controller pull-up\n"); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val &= ~U300_SYSCON_PMCR_DCON_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + regmap_update_bits(regmap, U300_SYSCON_PMCR, + U300_SYSCON_PMCR_DCON_ENABLE, 0); /* Register globally exported PM poweroff hook */ pm_power_off = u300_pm_poweroff; @@ -82,7 +103,31 @@ static int __init u300_init_boardpower(void) return 0; } +static int __init s365_board_probe(struct platform_device *pdev) +{ + return __u300_init_boardpower(pdev); +} + +static const struct of_device_id s365_board_match[] = { + { .compatible = "stericsson,s365" }, + {}, +}; + +static struct platform_driver s365_board_driver = { + .driver = { + .name = "s365-board", + .owner = THIS_MODULE, + .of_match_table = s365_board_match, + }, +}; + /* * So at module init time we hog the regulator! */ -module_init(u300_init_boardpower); +static int __init u300_init_boardpower(void) +{ + return platform_driver_probe(&s365_board_driver, + s365_board_probe); +} + +device_initcall(u300_init_boardpower); diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c deleted file mode 100644 index 910698293d64..000000000000 --- a/arch/arm/mach-u300/spi.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * arch/arm/mach-u300/spi.c - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/spi/spi.h> -#include <linux/amba/pl022.h> -#include <linux/platform_data/dma-coh901318.h> -#include <linux/err.h> - -/* - * The following is for the actual devices on the SSP/SPI bus - */ -#ifdef CONFIG_MACH_U300_SPIDUMMY -static void select_dummy_chip(u32 chipselect) -{ - pr_debug("CORE: %s called with CS=0x%x (%s)\n", - __func__, - chipselect, - chipselect ? "unselect chip" : "select chip"); - /* - * Here you would write the chip select value to the GPIO pins if - * this was a real chip (but this is a loopback dummy). - */ -} - -struct pl022_config_chip dummy_chip_info = { - /* available POLLING_TRANSFER, INTERRUPT_TRANSFER, DMA_TRANSFER */ - .com_mode = DMA_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - /* We can only act as master but SSP_SLAVE is possible in theory */ - .hierarchy = SSP_MASTER, - /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_12, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - /* - * This is where you insert a call to a function to enable CS - * (usually GPIO) for a certain chip. - */ - .cs_control = select_dummy_chip, -}; -#endif - -static struct spi_board_info u300_spi_devices[] = { -#ifdef CONFIG_MACH_U300_SPIDUMMY - { - /* A dummy chip used for loopback tests */ - .modalias = "spi-dummy", - /* Really dummy, pass in additional chip config here */ - .platform_data = NULL, - /* This defines how the controller shall handle the device */ - .controller_data = &dummy_chip_info, - /* .irq - no external IRQ routed from this device */ - .max_speed_hz = 1000000, - .bus_num = 0, /* Only one bus on this chip */ - .chip_select = 0, - /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LOOP, - }, -#endif -}; - -static struct pl022_ssp_controller ssp_platform_data = { - /* If you have several SPI buses this varies, we have only bus 0 */ - .bus_id = 0, - /* - * On the APP CPU GPIO 4, 5 and 6 are connected as generic - * chip selects for SPI. (Same on U330, U335 and U365.) - * TODO: make sure the GPIO driver can select these properly - * and do padmuxing accordingly too. - */ - .num_chipselect = 3, -#ifdef CONFIG_COH901318 - .enable_dma = 1, - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_SPI_RX, - .dma_tx_param = (void *) U300_DMA_SPI_TX, -#else - .enable_dma = 0, -#endif -}; - - -void __init u300_spi_init(struct amba_device *adev) -{ - adev->dev.platform_data = &ssp_platform_data; -} - -void __init u300_spi_register_board_devices(void) -{ - /* Register any SPI devices */ - spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices)); -} diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h deleted file mode 100644 index bd3d867e240f..000000000000 --- a/arch/arm/mach-u300/spi.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-u300/spi.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef SPI_H -#define SPI_H -#include <linux/amba/bus.h> - -#ifdef CONFIG_SPI_PL022 -void __init u300_spi_init(struct amba_device *adev); -void __init u300_spi_register_board_devices(void); -#else -/* Compile out SPI support if PL022 is not selected */ -static inline void __init u300_spi_init(struct amba_device *adev) -{ -} -static inline void __init u300_spi_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index d9e73209c9b8..390ae5feb1d0 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -18,17 +18,15 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/irq.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> /* Generic stuff */ #include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "timer.h" - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -189,6 +187,8 @@ #define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) #define US_PER_TICK ((1000000 + (HZ/2)) / HZ) +static void __iomem *u300_timer_base; + /* * The u300_set_mode() function is always called first, if we * have oneshot timer active, the oneshot scheduling function @@ -201,28 +201,28 @@ static void u300_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* * Set the periodic mode to a certain number of ticks per * jiffy. */ writel(TICKS_PER_JIFFY, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + u300_timer_base + U300_TIMER_APP_GPT1TC); /* * Set continuous mode, so the timer keeps triggering * interrupts. */ writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable timer interrupts */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Then enable the OS timer again */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); break; case CLOCK_EVT_MODE_ONESHOT: /* Just break; here? */ @@ -233,33 +233,33 @@ static void u300_set_mode(enum clock_event_mode mode, */ /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* * Expire far in the future, u300_set_next_event() will be * called soon... */ - writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC); /* We run one shot per tick here! */ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable interrupts for this timer */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Enable timer */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* Disable interrupts on GP1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); break; case CLOCK_EVT_MODE_RESUME: /* Ignore this call */ @@ -281,27 +281,27 @@ static int u300_set_next_event(unsigned long cycles, { /* Disable interrupts on GPT1 */ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Disable GP1 while we're reprogramming it. */ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + u300_timer_base + U300_TIMER_APP_DGPT1); /* Reset the General Purpose timer 1. */ writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + u300_timer_base + U300_TIMER_APP_RGPT1); /* IRQ in n * cycles */ - writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC); /* * We run one shot per tick here! (This is necessary to reconfigure, * the timer will tilt if you don't!) */ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + u300_timer_base + U300_TIMER_APP_SGPT1M); /* Enable timer interrupts */ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + u300_timer_base + U300_TIMER_APP_GPT1IE); /* Then enable the OS timer again */ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + u300_timer_base + U300_TIMER_APP_EGPT1); return 0; } @@ -320,8 +320,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_u300_1mhz; /* ACK/Clear timer IRQ for the APP GPT1 Timer */ + writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA); + u300_timer_base + U300_TIMER_APP_GPT1IA); evt->event_handler(evt); return IRQ_HANDLED; } @@ -342,65 +343,88 @@ static struct irqaction u300_timer_irq = { static u32 notrace u300_read_sched_clock(void) { - return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); + return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); +} + +static unsigned long u300_read_current_timer(void) +{ + return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); } +static struct delay_timer u300_delay_timer; /* * This sets up the system timers, clock source and clock event. */ -void __init u300_timer_init(void) +static void __init u300_timer_init_of(struct device_node *np) { + struct resource irq_res; + int irq; struct clk *clk; unsigned long rate; + u300_timer_base = of_iomap(np, 0); + if (!u300_timer_base) + panic("could not ioremap system timer\n"); + + /* Get the IRQ for the GP1 timer */ + irq = of_irq_to_resource(np, 2, &irq_res); + if (irq <= 0) + panic("no IRQ for system timer\n"); + + pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq); + /* Clock the interrupt controller */ - clk = clk_get_sys("apptimer", NULL); + clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); clk_prepare_enable(clk); rate = clk_get_rate(clk); setup_sched_clock(u300_read_sched_clock, 32, rate); + u300_delay_timer.read_current_timer = &u300_read_current_timer; + u300_delay_timer.freq = rate; + register_current_timer_delay(&u300_delay_timer); + /* * Disable the "OS" and "DD" timers - these are designed for Symbian! * Example usage in cnh1601578 cpu subsystem pd_timer_app.c */ writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC); + u300_timer_base + U300_TIMER_APP_CRC); writel(U300_TIMER_APP_ROST_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST); + u300_timer_base + U300_TIMER_APP_ROST); writel(U300_TIMER_APP_DOST_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST); + u300_timer_base + U300_TIMER_APP_DOST); writel(U300_TIMER_APP_RDDT_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT); + u300_timer_base + U300_TIMER_APP_RDDT); writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT); + u300_timer_base + U300_TIMER_APP_DDDT); /* Reset the General Purpose timer 1. */ writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + u300_timer_base + U300_TIMER_APP_RGPT1); /* Set up the IRQ handler */ - setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq); + setup_irq(irq, &u300_timer_irq); /* Reset the General Purpose timer 2 */ writel(U300_TIMER_APP_RGPT2_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2); + u300_timer_base + U300_TIMER_APP_RGPT2); /* Set this timer to run around forever */ - writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC); + writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC); /* Set continuous mode so it wraps around */ writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M); + u300_timer_base + U300_TIMER_APP_SGPT2M); /* Disable timer interrupts */ writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE); + u300_timer_base + U300_TIMER_APP_GPT2IE); /* Then enable the GP2 timer to use as a free running us counter */ writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); + u300_timer_base + U300_TIMER_APP_EGPT2); /* Use general purpose timer 2 as clock source */ - if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC, + if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC, "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); @@ -413,3 +437,6 @@ void __init u300_timer_init(void) * used by hrtimers! */ } + +CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer", + u300_timer_init_of); diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h deleted file mode 100644 index d34287bc34f5..000000000000 --- a/arch/arm/mach-u300/timer.h +++ /dev/null @@ -1 +0,0 @@ -extern void u300_timer_init(void); diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h deleted file mode 100644 index 83f50772e169..000000000000 --- a/arch/arm/mach-u300/u300-gpio.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Individual pin assignments for the B335/S335. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c index a15f7928fb11..8774e058cb6c 100644 --- a/drivers/clk/clk-u300.c +++ b/drivers/clk/clk-u300.c @@ -11,7 +11,349 @@ #include <linux/io.h> #include <linux/clk-provider.h> #include <linux/spinlock.h> -#include <mach/syscon.h> +#include <linux/of.h> + +/* APP side SYSCON registers */ +/* CLK Control Register 16bit (R/W) */ +#define U300_SYSCON_CCR (0x0000) +#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) +#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) +#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) +/* CLK Status Register 16bit (R/W) */ +#define U300_SYSCON_CSR (0x0004) +#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) +#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) +/* Reset lines for SLOW devices 16bit (R/W) */ +#define U300_SYSCON_RSR (0x0014) +#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) +#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) +#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) +#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) +#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) +#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) +#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) +#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) +#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) +#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) +/* Reset lines for FAST devices 16bit (R/W) */ +#define U300_SYSCON_RFR (0x0018) +#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) +#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) +#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) +#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) +#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) +#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) +#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) +#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) +/* Reset lines for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_RRR (0x001c) +#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) +#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) +#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) +#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) +#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) +#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) +#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) +#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) +#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) +#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) +#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) +#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) +#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) +/* Clock enable for SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CESR (0x0020) +#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) +#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) +#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) +#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) +#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) +#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) +#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) +#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) +#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) +/* Clock enable for FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CEFR (0x0024) +#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) +#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) +#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) +#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) +#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) +/* Clock enable for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CERR (0x0028) +#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) +#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) +#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) +#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) +#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) +#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) +#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) +#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) +#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) +#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) +#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) +#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) +#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) +#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) +/* Single block clock enable 16bit (-/W) */ +#define U300_SYSCON_SBCER (0x002c) +#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) +#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) +#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) +#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) +#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) +#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) +#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) +#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) +#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) +#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) +#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) +#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) +#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) +#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) +#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) +#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) +#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) +#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) +#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) +#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) +#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) +#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) +#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) +#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) +#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) +#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) +#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) +#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) +#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) +#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) +#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) +#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) +#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) +/* Single block clock disable 16bit (-/W) */ +#define U300_SYSCON_SBCDR (0x0030) +/* Same values as above for SBCER */ +/* Clock force SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CFSR (0x003c) +#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) +/* Clock force FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CFFR (0x40) +/* Values not defined. Define if you want to use them. */ +/* Clock force the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CFRR (0x44) +#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) +#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) +#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) +#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) +#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) +#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) +/* PLL208 Frequency Control 16bit (R/W) */ +#define U300_SYSCON_PFCR (0x48) +#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) +/* Reset Out 16bit (R/W) */ +#define U300_SYSCON_RCR (0x6c) +#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) +/* EMIF Slew Rate Control 16bit (R/W) */ +#define U300_SYSCON_SRCLR (0x70) +#define U300_SYSCON_SRCLR_MASK (0x03FF) +#define U300_SYSCON_SRCLR_VALUE (0x03FF) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) +/* EMIF Clock Control Register 16bit (R/W) */ +#define U300_SYSCON_ECCR (0x0078) +#define U300_SYSCON_ECCR_MASK (0x000F) +#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) +#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) +#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) +#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) +/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ +#define U300_SYSCON_MMF0R (0x90) +#define U300_SYSCON_MMF0R_MASK (0x00FF) +#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) +/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ +#define U300_SYSCON_MMF1R (0x94) +#define U300_SYSCON_MMF1R_MASK (0x00FF) +#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) +/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ +#define U300_SYSCON_MMCR (0x9C) +#define U300_SYSCON_MMCR_MASK (0x0003) +#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) +#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) +/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ +#define U300_SYSCON_S0CCR (0x120) +#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ +#define U300_SYSCON_S1CCR (0x124) +#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ +#define U300_SYSCON_S2CCR (0x128) +#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) +#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) +#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ +#define U300_SYSCON_PICR (0x0130) +#define U300_SYSCON_PICR_MASK (0x00FF) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) +#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) +#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) +#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) +#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) +/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ +#define U300_SYSCON_PISR (0x0134) +#define U300_SYSCON_PISR_MASK (0x000F) +#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) +#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) +#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) +#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) +/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ +#define U300_SYSCON_PICLR (0x0138) +#define U300_SYSCON_PICLR_MASK (0x000F) +#define U300_SYSCON_PICLR_RWMASK (0x0000) +#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) +#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) +#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) +#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) +/* Clock activity observability register 0 */ +#define U300_SYSCON_C0OAR (0x140) +#define U300_SYSCON_C0OAR_MASK (0xFFFF) +#define U300_SYSCON_C0OAR_VALUE (0xFFFF) +#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) +#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) +#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) +#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) +#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) +#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) +#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) +#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) +#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) +#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) +#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) +#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) +#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) +#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) +#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) +#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) +/* Clock activity observability register 1 */ +#define U300_SYSCON_C1OAR (0x144) +#define U300_SYSCON_C1OAR_MASK (0x3FFE) +#define U300_SYSCON_C1OAR_VALUE (0x3FFE) +#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) +#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) +#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) +#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) +#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) +#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) +#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) +#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) +#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) +#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) +#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) +#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) +#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) +/* Clock activity observability register 2 */ +#define U300_SYSCON_C2OAR (0x148) +#define U300_SYSCON_C2OAR_MASK (0x0FFF) +#define U300_SYSCON_C2OAR_VALUE (0x0FFF) +#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) +#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) +#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) +#define U300_SYSCON_C2OAR_VC_CLK (0x0100) +#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) +#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) +#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) +#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) +#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) +#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) +#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) +#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) + /* * The clocking hierarchy currently looks like this. @@ -386,6 +728,213 @@ syscon_clk_register(struct device *dev, const char *name, return clk; } +#define U300_CLK_TYPE_SLOW 0 +#define U300_CLK_TYPE_FAST 1 +#define U300_CLK_TYPE_REST 2 + +/** + * struct u300_clock - defines the bits and pieces for a certain clock + * @type: the clock type, slow fast or rest + * @id: the bit in the slow/fast/rest register for this clock + * @hw_ctrld: whether the clock is hardware controlled + * @clk_val: a value to poke in the one-write enable/disable registers + */ +struct u300_clock { + u8 type; + u8 id; + bool hw_ctrld; + u16 clk_val; +}; + +struct u300_clock const __initconst u300_clk_lookup[] = { + { + .type = U300_CLK_TYPE_REST, + .id = 3, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_CPU_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 4, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 8, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 9, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 10, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 12, + .hw_ctrld = false, + /* INTCON: cannot be enabled, just taken out of reset */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 2, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 4, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 6, + .hw_ctrld = true, + /* No clock enable register bit */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 7, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 8, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, + }, +}; + +static void __init of_u300_syscon_clk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + void __iomem *res_reg; + void __iomem *en_reg; + u32 clk_type; + u32 clk_id; + int i; + + if (of_property_read_u32(np, "clock-type", &clk_type)) { + pr_err("%s: syscon clock \"%s\" missing clock-type property\n", + __func__, clk_name); + return; + } + if (of_property_read_u32(np, "clock-id", &clk_id)) { + pr_err("%s: syscon clock \"%s\" missing clock-id property\n", + __func__, clk_name); + return; + } + parent_name = of_clk_get_parent_name(np, 0); + + switch (clk_type) { + case U300_CLK_TYPE_SLOW: + res_reg = syscon_vbase + U300_SYSCON_RSR; + en_reg = syscon_vbase + U300_SYSCON_CESR; + break; + case U300_CLK_TYPE_FAST: + res_reg = syscon_vbase + U300_SYSCON_RFR; + en_reg = syscon_vbase + U300_SYSCON_CEFR; + break; + case U300_CLK_TYPE_REST: + res_reg = syscon_vbase + U300_SYSCON_RRR; + en_reg = syscon_vbase + U300_SYSCON_CERR; + break; + default: + pr_err("unknown clock type %x specified\n", clk_type); + return; + } + + for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) { + const struct u300_clock *u3clk = &u300_clk_lookup[i]; + + if (u3clk->type == clk_type && u3clk->id == clk_id) + clk = syscon_clk_register(NULL, + clk_name, parent_name, + 0, u3clk->hw_ctrld, + res_reg, u3clk->id, + en_reg, u3clk->id, + u3clk->clk_val); + } + + if (!IS_ERR(clk)) { + of_clk_add_provider(np, of_clk_src_simple_get, clk); + + /* + * Some few system clocks - device tree does not + * represent clocks without a corresponding device node. + * for now we add these three clocks here. + */ + if (clk_type == U300_CLK_TYPE_REST && clk_id == 5) + clk_register_clkdev(clk, NULL, "pl172"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 9) + clk_register_clkdev(clk, NULL, "semi"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 12) + clk_register_clkdev(clk, NULL, "intcon"); + } +} + /** * struct clk_mclk - U300 MCLK clock (MMC/SD clock) * @hw: corresponding clock hardware entry @@ -590,10 +1139,41 @@ mclk_clk_register(struct device *dev, const char *name, return clk; } +static void __init of_u300_syscon_mclk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + + parent_name = of_clk_get_parent_name(np, 0); + clk = mclk_clk_register(NULL, clk_name, parent_name, false); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static const __initconst struct of_device_id u300_clk_match[] = { + { + .compatible = "fixed-clock", + .data = of_fixed_clk_setup, + }, + { + .compatible = "fixed-factor-clock", + .data = of_fixed_factor_clk_setup, + }, + { + .compatible = "stericsson,u300-syscon-clk", + .data = of_u300_syscon_clk_init, + }, + { + .compatible = "stericsson,u300-syscon-mclk", + .data = of_u300_syscon_mclk_init, + }, +}; + + void __init u300_clk_init(void __iomem *base) { u16 val; - struct clk *clk; syscon_vbase = base; @@ -610,137 +1190,5 @@ void __init u300_clk_init(void __iomem *base) val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; writew(val, syscon_vbase + U300_SYSCON_PMCR); - /* These are always available (RTC and PLL13) */ - clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, - CLK_IS_ROOT, 32768); - /* The watchdog sits directly on the 32 kHz clock */ - clk_register_clkdev(clk, NULL, "coh901327_wdog"); - clk = clk_register_fixed_rate(NULL, "pll13", NULL, - CLK_IS_ROOT, 13000000); - - /* These derive from PLL208 */ - clk = clk_register_fixed_rate(NULL, "pll208", NULL, - CLK_IS_ROOT, 208000000); - clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", - 0, 1, 1); - clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", - 0, 1, 2); - clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", - 0, 1, 4); - /* The 52 MHz is divided down to 26 MHz */ - clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", - 0, 1, 2); - - /* Directly on the AMBA interconnect */ - clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 3, - syscon_vbase + U300_SYSCON_CERR, 3, - U300_SYSCON_SBCER_CPU_CLK_EN); - clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 4, - syscon_vbase + U300_SYSCON_CERR, 4, - U300_SYSCON_SBCER_DMAC_CLK_EN); - clk_register_clkdev(clk, NULL, "dma"); - clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 6, - syscon_vbase + U300_SYSCON_CERR, 6, - U300_SYSCON_SBCER_NANDIF_CLK_EN); - clk_register_clkdev(clk, NULL, "fsmc-nand"); - clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 8, - syscon_vbase + U300_SYSCON_CERR, 8, - U300_SYSCON_SBCER_XGAM_CLK_EN); - clk_register_clkdev(clk, NULL, "xgam"); - clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 9, - syscon_vbase + U300_SYSCON_CERR, 9, - U300_SYSCON_SBCER_SEMI_CLK_EN); - clk_register_clkdev(clk, NULL, "semi"); - - /* AHB bridge clocks */ - clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 10, - syscon_vbase + U300_SYSCON_CERR, 10, - U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 12, - syscon_vbase + U300_SYSCON_CERR, 12, - /* Cannot be enabled, just taken out of reset */ - 0xFFFFU); - clk_register_clkdev(clk, NULL, "intcon"); - clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 5, - syscon_vbase + U300_SYSCON_CERR, 5, - U300_SYSCON_SBCER_EMIF_CLK_EN); - clk_register_clkdev(clk, NULL, "pl172"); - - /* FAST bridge clocks */ - clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, - syscon_vbase + U300_SYSCON_RFR, 0, - syscon_vbase + U300_SYSCON_CEFR, 0, - U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 1, - syscon_vbase + U300_SYSCON_CEFR, 1, - U300_SYSCON_SBCER_I2C0_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.0"); - clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 2, - syscon_vbase + U300_SYSCON_CEFR, 2, - U300_SYSCON_SBCER_I2C1_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.1"); - clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 5, - syscon_vbase + U300_SYSCON_CEFR, 5, - U300_SYSCON_SBCER_MMC_CLK_EN); - clk_register_clkdev(clk, "apb_pclk", "mmci"); - clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 6, - syscon_vbase + U300_SYSCON_CEFR, 6, - U300_SYSCON_SBCER_SPI_CLK_EN); - /* The SPI has no external clock for the outward bus, uses the pclk */ - clk_register_clkdev(clk, NULL, "pl022"); - clk_register_clkdev(clk, "apb_pclk", "pl022"); - - /* SLOW bridge clocks */ - clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, - syscon_vbase + U300_SYSCON_RSR, 0, - syscon_vbase + U300_SYSCON_CESR, 0, - U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 1, - syscon_vbase + U300_SYSCON_CESR, 1, - U300_SYSCON_SBCER_UART_CLK_EN); - /* Same clock is used for APB and outward bus */ - clk_register_clkdev(clk, NULL, "uart0"); - clk_register_clkdev(clk, "apb_pclk", "uart0"); - clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 4, - syscon_vbase + U300_SYSCON_CESR, 4, - U300_SYSCON_SBCER_GPIO_CLK_EN); - clk_register_clkdev(clk, NULL, "u300-gpio"); - clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 5, - syscon_vbase + U300_SYSCON_CESR, 6, - U300_SYSCON_SBCER_KEYPAD_CLK_EN); - clk_register_clkdev(clk, NULL, "coh901461-keypad"); - clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, - syscon_vbase + U300_SYSCON_RSR, 6, - /* No clock enable register bit */ - NULL, 0, 0xFFFFU); - clk_register_clkdev(clk, NULL, "rtc-coh901331"); - clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 7, - syscon_vbase + U300_SYSCON_CESR, 7, - U300_SYSCON_SBCER_APP_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "apptimer"); - clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 8, - syscon_vbase + U300_SYSCON_CESR, 8, - U300_SYSCON_SBCER_ACC_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "timer"); - - /* Then this special MMC/SD clock */ - clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); - clk_register_clkdev(clk, NULL, "mmci"); + of_clk_init(u300_clk_match); } diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 3b23061cdb41..9bfaddd57ef1 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -22,6 +22,7 @@ #include <linux/uaccess.h> #include <linux/debugfs.h> #include <linux/platform_data/dma-coh901318.h> +#include <linux/of_dma.h> #include "coh901318.h" #include "dmaengine.h" @@ -1788,6 +1789,35 @@ bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) } EXPORT_SYMBOL(coh901318_filter_id); +struct coh901318_filter_args { + struct coh901318_base *base; + unsigned int ch_nr; +}; + +static bool coh901318_filter_base_and_id(struct dma_chan *chan, void *data) +{ + struct coh901318_filter_args *args = data; + + if (&args->base->dma_slave == chan->device && + args->ch_nr == to_coh901318_chan(chan)->id) + return true; + + return false; +} + +static struct dma_chan *coh901318_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct coh901318_filter_args args = { + .base = ofdma->of_dma_data, + .ch_nr = dma_spec->args[0], + }; + dma_cap_mask_t cap; + dma_cap_zero(cap); + dma_cap_set(DMA_SLAVE, cap); + + return dma_request_channel(cap, coh901318_filter_base_and_id, &args); +} /* * DMA channel allocation */ @@ -2735,12 +2765,19 @@ static int __init coh901318_probe(struct platform_device *pdev) if (err) goto err_register_memcpy; + err = of_dma_controller_register(pdev->dev.of_node, coh901318_xlate, + base); + if (err) + goto err_register_of_dma; + platform_set_drvdata(pdev, base); dev_info(&pdev->dev, "Initialized COH901318 DMA on virtual base 0x%08x\n", (u32) base->virtbase); return err; + err_register_of_dma: + dma_async_device_unregister(&base->dma_memcpy); err_register_memcpy: dma_async_device_unregister(&base->dma_slave); err_register_slave: @@ -2752,17 +2789,23 @@ static int coh901318_remove(struct platform_device *pdev) { struct coh901318_base *base = platform_get_drvdata(pdev); + of_dma_controller_free(pdev->dev.of_node); dma_async_device_unregister(&base->dma_memcpy); dma_async_device_unregister(&base->dma_slave); coh901318_pool_destroy(&base->pool); return 0; } +static const struct of_device_id coh901318_dt_match[] = { + { .compatible = "stericsson,coh901318" }, + {}, +}; static struct platform_driver coh901318_driver = { .remove = coh901318_remove, .driver = { .name = "coh901318", + .of_match_table = coh901318_dt_match, }, }; diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 0a6f941133f6..d1a6b204af00 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of_i2c.h> /* the name of this kernel module */ #define NAME "stu300" @@ -867,7 +868,6 @@ stu300_probe(struct platform_device *pdev) struct resource *res; int bus_nr; int ret = 0; - char clk_name[] = "I2C0"; dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL); if (!dev) { @@ -876,8 +876,7 @@ stu300_probe(struct platform_device *pdev) } bus_nr = pdev->id; - clk_name[3] += (char)bus_nr; - dev->clk = devm_clk_get(&pdev->dev, clk_name); + dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { dev_err(&pdev->dev, "could not retrieve i2c bus clock\n"); return PTR_ERR(dev->clk); @@ -923,6 +922,7 @@ stu300_probe(struct platform_device *pdev) adap->nr = bus_nr; adap->algo = &stu300_algo; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; i2c_set_adapdata(adap, dev); /* i2c device drivers may be active on return from add_adapter() */ @@ -934,6 +934,10 @@ stu300_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, dev); + dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n", + dev->virtbase, dev->irq); + of_i2c_register_devices(adap); + return 0; } @@ -978,11 +982,17 @@ stu300_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id stu300_dt_match[] = { + { .compatible = "st,ddci2c" }, + {}, +}; + static struct platform_driver stu300_i2c_driver = { .driver = { .name = NAME, .owner = THIS_MODULE, .pm = STU300_I2C_PM, + .of_match_table = stu300_dt_match, }, .remove = __exit_p(stu300_remove), diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index d6b41747d687..eeff7f7fc920 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -22,7 +22,6 @@ #include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/pinctrl-coh901.h> #include "pinctrl-coh901.h" #define U300_GPIO_PORT_STRIDE (0x30) @@ -58,8 +57,9 @@ #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) /* 8 bits per port, no version has more than 7 ports */ +#define U300_GPIO_NUM_PORTS 7 #define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7) +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS) struct u300_gpio { struct gpio_chip chip; @@ -111,9 +111,6 @@ struct u300_gpio_confdata { int outval; }; -/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ -#define BS335_GPIO_NUM_PORTS 7 - #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ .output = false, \ @@ -136,7 +133,7 @@ struct u300_gpio_confdata { /* Initial configuration */ static const struct __initconst u300_gpio_confdata -bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +bs335_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { U300_FLOATING_INPUT, @@ -630,13 +627,12 @@ static void __init u300_gpio_init_pin(struct u300_gpio *gpio, } } -static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, - struct u300_gpio_platform *plat) +static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio) { int i, j; /* Write default config and values to all pins */ - for (i = 0; i < plat->ports; i++) { + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { for (j = 0; j < 8; j++) { const struct u300_gpio_confdata *conf; int offset = (i*8) + j; @@ -693,7 +689,6 @@ static struct coh901_pinpair coh901_pintable[] = { static int __init u300_gpio_probe(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio; struct resource *memres; int err = 0; @@ -707,9 +702,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return -ENOMEM; gpio->chip = u300_gpio_chip; - gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT; + gpio->chip.ngpio = U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT; gpio->chip.dev = &pdev->dev; - gpio->chip.base = plat->gpio_base; + gpio->chip.base = 0; gpio->dev = &pdev->dev; memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -750,11 +745,11 @@ static int __init u300_gpio_probe(struct platform_device *pdev) ((val & 0x0000FE00) >> 9) * 8); writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, gpio->base + U300_GPIO_CR); - u300_gpio_init_coh901571(gpio, plat); + u300_gpio_init_coh901571(gpio); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); - for (portno = 0 ; portno < plat->ports; portno++) { + for (portno = 0 ; portno < U300_GPIO_NUM_PORTS; portno++) { struct u300_gpio_port *port = kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL); @@ -768,8 +763,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev) port->number = portno; port->gpio = gpio; - port->irq = platform_get_irq_byname(pdev, - port->name); + port->irq = platform_get_irq(pdev, portno); dev_dbg(gpio->dev, "register IRQ %d for port %s\n", port->irq, port->name); @@ -806,6 +800,9 @@ static int __init u300_gpio_probe(struct platform_device *pdev) } dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno); +#ifdef CONFIG_OF_GPIO + gpio->chip.of_node = pdev->dev.of_node; +#endif err = gpiochip_add(&gpio->chip); if (err) { dev_err(gpio->dev, "unable to add gpiochip: %d\n", err); @@ -860,9 +857,15 @@ static int __exit u300_gpio_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_gpio_match[] = { + { .compatible = "stericsson,gpio-coh901" }, + {}, +}; + static struct platform_driver u300_gpio_driver = { .driver = { .name = "u300-gpio", + .of_match_table = u300_gpio_match, }, .remove = __exit_p(u300_gpio_remove), }; diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index 6a3a7503e6a0..06bfa09bb15c 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1105,10 +1105,17 @@ static int u300_pmx_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id u300_pinctrl_match[] = { + { .compatible = "stericsson,pinctrl-u300" }, + {}, +}; + + static struct platform_driver u300_pmx_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = u300_pinctrl_match, }, .probe = u300_pmx_probe, .remove = u300_pmx_remove, diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c index 93c06588ddca..ad6863a76af9 100644 --- a/drivers/rtc/rtc-coh901331.c +++ b/drivers/rtc/rtc-coh901331.c @@ -274,11 +274,17 @@ static void coh901331_shutdown(struct platform_device *pdev) clk_disable_unprepare(rtap->clk); } +static const struct of_device_id coh901331_dt_match[] = { + { .compatible = "stericsson,coh901331" }, + {}, +}; + static struct platform_driver coh901331_driver = { .driver = { .name = "rtc-coh901331", .owner = THIS_MODULE, .pm = &coh901331_pm_ops, + .of_match_table = coh901331_dt_match, }, .remove = __exit_p(coh901331_remove), .shutdown = coh901331_shutdown, diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 371cc66f1a0e..3b246543282f 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2083,6 +2083,7 @@ pl022_platform_data_dt_get(struct device *dev) } pd->bus_id = -1; + pd->enable_dma = 1; of_property_read_u32(np, "num-cs", &tmp); pd->num_chipselect = tmp; of_property_read_u32(np, "pl022,autosuspend-delay", diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index b9b8a8be6f12..4bd070f524e5 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -354,9 +354,9 @@ static int __init coh901327_probe(struct platform_device *pdev) clk_disable(clk); - if (margin < 1 || margin > 327) - margin = 60; - coh901327_wdt.timeout = margin; + ret = watchdog_init_timeout(&coh901327_wdt, margin, &pdev->dev); + if (ret < 0) + coh901327_wdt.timeout = 60; ret = watchdog_register_device(&coh901327_wdt); if (ret == 0) @@ -441,10 +441,16 @@ void coh901327_watchdog_reset(void) /* Return and await doom */ } +static const struct of_device_id coh901327_dt_match[] = { + { .compatible = "stericsson,coh901327" }, + {}, +}; + static struct platform_driver coh901327_driver = { .driver = { .owner = THIS_MODULE, .name = "coh901327_wdog", + .of_match_table = coh901327_dt_match, }, .remove = __exit_p(coh901327_remove), .suspend = coh901327_suspend, diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h deleted file mode 100644 index dfbc65d10484..000000000000 --- a/include/linux/platform_data/pinctrl-coh901.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2007-2012 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_U300_H -#define __MACH_U300_GPIO_U300_H - -/** - * struct u300_gpio_platform - U300 GPIO platform data - * @ports: number of GPIO block ports - * @gpio_base: first GPIO number for this block (use a free range) - */ -struct u300_gpio_platform { - u8 ports; - int gpio_base; -}; - -#endif /* __MACH_U300_GPIO_U300_H */ |