staging: comedi: don't rely on comedidev.h to include headers

comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.

Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.

Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

122 files changed, 138 insertions, 14 deletions

diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index c6a7c096f625..ab278942ebd1 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -19,21 +19,7 @@
 #ifndef _COMEDIDEV_H
 #define _COMEDIDEV_H
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
 #include <linux/dma-mapping.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/timer.h>
 
 #include "comedi.h"
 
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 94e17500150f..7966079a8361 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -73,6 +73,7 @@ I/O port base address can be found in the output of 'lspci -v'.
    will copy the latched value to a Comedi buffer.
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index b58e28bb206d..432e3f9c3301 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -50,6 +50,7 @@ Interrupt support for these boards is also not currently supported.
 Configuration Options: not applicable, uses PCI auto config
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index dc031c494a27..aafc172f3a98 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -22,6 +22,8 @@
  * for more details.
  */
 
+#include <linux/delay.h>
+
 #define NVRAM_USER_DATA_START	0x100
 
 #define NVCMD_BEGIN_READ	(0x7 << 5)	/* nvRam begin read command */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index a89e505c8a3a..1449b92403e2 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -40,6 +40,8 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
   +----------+-----------+------------------------------------------------+
 */
 
+#include <linux/delay.h>
+
 /*
  * ADDON RELATED ADDITIONS
  */
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index 43c2c10a7c32..8d229b2f0973 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 242903aac829..34ab0679e992 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index b52cfe01e6c8..ae9ded63dcec 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 7523c8b0e8f7..08674c18cf42 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 22bace62210c..c5717d63e16a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 1f7bed9a3f7f..43296a6e7d4e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c
index e533f55a1d2f..e600c05c2ecc 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1710.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1710.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include <asm/i387.h>
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 89ead8eb3c70..cb5d26a567d3 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index ca1bd92ecb17..92ac8ece8494 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index a7828bb64a91..d804957018ab 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c
index 17b540d3c6ae..1213d5aa6bea 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3200.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include <asm/i387.h>
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index 9b8544b43b24..d9650ffb7d2f 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index cf60248c726d..dbc0678027ca 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -22,6 +22,7 @@
  * more details.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/addi_watchdog.c b/drivers/staging/comedi/drivers/addi_watchdog.c
index 7b21acc93929..23031feaa095 100644
--- a/drivers/staging/comedi/drivers/addi_watchdog.c
+++ b/drivers/staging/comedi/drivers/addi_watchdog.c
@@ -18,6 +18,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include "addi_watchdog.h"
 
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index ffd91e4f90bf..a67ad57cefcb 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -38,6 +38,7 @@ References:
 	- adl_pci9118.c
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index 0d9243a5f495..81b7203f824f 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -44,6 +44,7 @@ driver.
 Configuration Options: not applicable, uses comedi PCI auto config
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 0b591b0b5501..b3d009285ed4 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index cf93e416dd29..78cea193504f 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -64,6 +64,7 @@ TODO:
 
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 2a48f8421ca0..22196ada0362 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -77,6 +77,7 @@ Configuration options:
  * manual attachment.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 72e88d8465ea..cdf5ba26c590 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -73,6 +73,9 @@ If you do not specify any options, they will default to
 
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
+
 #include "../comedidev.h"
 
 /* address scheme (page 2.17 of the manual) */
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 53653d3c4937..f84df46d326a 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -41,6 +41,7 @@ Configuration options:
 	device will be used.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 919babae4cbe..f914fb1f571b 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -43,6 +43,7 @@ TODO:
 3. Implement calibration.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/adv_pci1724.c b/drivers/staging/comedi/drivers/adv_pci1724.c
index d27730e2d29f..84907c79ca2b 100644
--- a/drivers/staging/comedi/drivers/adv_pci1724.c
+++ b/drivers/staging/comedi/drivers/adv_pci1724.c
@@ -52,6 +52,8 @@ supported PCI devices are configured as comedi devices automatically.
 
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index ff48cb30d4af..f091fa0d304d 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -29,6 +29,7 @@ Configuration options:
 
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c
index ae88fe1f79d0..8d081076eed6 100644
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@@ -35,6 +35,7 @@ Notes:
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
 #include "8255.h"
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index 029834d0ff1f..f066b5714941 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -30,6 +30,7 @@ Configuration Options:
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
 
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index d1436733e913..dc1dee79fc16 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -192,6 +192,7 @@
  * order they appear in the channel list.
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include "amplc_dio200.h"
diff --git a/drivers/staging/comedi/drivers/amplc_dio200_common.c b/drivers/staging/comedi/drivers/amplc_dio200_common.c
index 56b783642155..32c490b27b55 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200_common.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200_common.c
@@ -19,6 +19,7 @@
     GNU General Public License for more details.
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/amplc_dio200_pci.c b/drivers/staging/comedi/drivers/amplc_dio200_pci.c
index 25d9cc00b888..a810a2416443 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200_pci.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200_pci.c
@@ -220,6 +220,7 @@
  * order they appear in the channel list.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 81b9b80f8a64..98075f999c9f 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -47,6 +47,7 @@ the IRQ jumper.  If no interrupt is connected, then subdevice 1 is
 unused.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 6546095e7a45..e7108045f553 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -33,6 +33,7 @@ connected to a reed-relay. Relay contacts are closed when output is 1.
 The state of the outputs can be read.
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #define PC263_DRIVER_NAME	"amplc_pc263"
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 043120448cf9..2fc56c40f5b1 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -98,6 +98,7 @@ Caveats:
      correctly.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 147702b51872..43059c25d5ea 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -184,6 +184,7 @@ Support for PCI230+/260+, more triggered scan functionality, and workarounds
 for (or detection of) various hardware problems added by Ian Abbott.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/amplc_pci263.c b/drivers/staging/comedi/drivers/amplc_pci263.c
index 4da900cc5845..145bb48f618e 100644
--- a/drivers/staging/comedi/drivers/amplc_pci263.c
+++ b/drivers/staging/comedi/drivers/amplc_pci263.c
@@ -32,6 +32,7 @@ connected to a reed-relay. Relay contacts are closed when output is 1.
 The state of the outputs can be read.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index ff0f8939ae78..05e01a3b5af6 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -34,6 +34,7 @@ Status: experimental
 
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index d70d1dd30502..41d89ee7fa33 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -61,6 +61,7 @@ TODO:
 analog triggering on 1602 series
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index e8222b0fe841..e6e456163a29 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -82,6 +82,7 @@ TODO:
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index c1f0aa59f66f..94f115820279 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -37,6 +37,7 @@
  * Only simple analog output writing is supported.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 543f213c7291..b8362a71e4bb 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -35,6 +35,7 @@ No interrupts, multi channel or FIFO AI, although the card looks like it could s
 See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index b019566f6c55..edf17b63096f 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -74,6 +74,7 @@ Configuration Options: not applicable, uses PCI auto config
     -Calin Culianu <calin@ajvar.org>
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index 1952c62ad1fd..7e20bf00759c 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -45,6 +45,7 @@ Configuration Options:
   within each minor will be concatenated together in the order given here.
 */
 
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include "../comedi.h"
diff --git a/drivers/staging/comedi/drivers/comedi_fc.c b/drivers/staging/comedi/drivers/comedi_fc.c
index b3d89c82d087..26d9dbcf8bd4 100644
--- a/drivers/staging/comedi/drivers/comedi_fc.c
+++ b/drivers/staging/comedi/drivers/comedi_fc.c
@@ -19,6 +19,7 @@
     GNU General Public License for more details.
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include "comedi_fc.h"
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index 05d79cf4feff..da52e514b90e 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -76,6 +76,7 @@ pin, which can be used to wake up tasks.
    or http://www.linux-magazin.de/ausgabe/1999/10/IO/io.html
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index eb05f5e57ebc..16c07802107f 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -45,6 +45,7 @@ zero volts).
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <asm/div64.h>
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index 0fb9027dde2d..e781716bf355 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -25,6 +25,7 @@ Status: works
 Configuration Options: not applicable, uses comedi PCI auto config
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index f821b81cd3be..de920ccff400 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -102,6 +102,7 @@ Configuration options: not applicable, uses PCI auto config
 
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 2e7e3e202390..126b4528d3cf 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -33,6 +33,7 @@
  * cheap das08 hardware doesn't really support them.
  */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 24a3922ddd9a..719c978bff87 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -39,6 +39,7 @@ Options (for pcm-das08):
 Command support does not exist, but could be added for this board.
 */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/das08_isa.c b/drivers/staging/comedi/drivers/das08_isa.c
index 50d27aa923dd..4fb03d3852d3 100644
--- a/drivers/staging/comedi/drivers/das08_isa.c
+++ b/drivers/staging/comedi/drivers/das08_isa.c
@@ -43,6 +43,7 @@
  *	[0] - base io address
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include "das08.h"
diff --git a/drivers/staging/comedi/drivers/das08_pci.c b/drivers/staging/comedi/drivers/das08_pci.c
index 2786887173a4..3a6d3725b25f 100644
--- a/drivers/staging/comedi/drivers/das08_pci.c
+++ b/drivers/staging/comedi/drivers/das08_pci.c
@@ -31,6 +31,7 @@
  * Configuration Options: not applicable, uses PCI auto config
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 66be41db59ad..593ec3866146 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -73,6 +73,8 @@ www.measurementcomputing.com
 
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index ee5e1561c835..ede0d47aefc3 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -52,6 +52,7 @@ Options:
 irq can be omitted, although the cmd interface will not work without it.
 */
 
+#include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index e6c852530acb..f5ed55c68fa1 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -94,6 +94,7 @@ TODO:
 	read insn for analog out
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/io.h>
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index 8529c9f402a1..8f6dc0a44909 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -33,6 +33,7 @@ Devices: [Keithley Metrabyte] DAS6402 (das6402)
 This driver has suffered bitrot.
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index f3f4be5b3a59..13e1cd0afd32 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -56,6 +56,7 @@ cmd triggers supported:
 
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index a8b2c64cafd9..1d80d7457529 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -32,6 +32,8 @@ Configuration Options:
   comedi_config /dev/comedi0 dmm32at baseaddr,irq
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index 2aa70d2b502d..2537696f80fc 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -29,6 +29,7 @@ Configuration options:
   [5] - D/A 1 range (same choices)
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/delay.h>
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index bbae652aa894..34afa940db77 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -41,6 +41,7 @@ Configuration options:
   [4] - D/A 1 range (same choices)
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index a46a5b32405d..a1076a43c294 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -34,6 +34,7 @@ a power of 10, from 1 to 10^7, of which only 3 or 4 are useful.  In
 addition, the clock does not seem to be very accurate.
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index e729271fcfe3..c33708c90585 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -51,6 +51,7 @@ Configuration options:
   [12] - Analog output 7 range configuration (same options)
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index 2f46be715f79..1ba49e79ee01 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -33,6 +33,7 @@ Configuration options:
   [0] - I/O port base base address
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 3d1ae5f3fa5f..6d3553c8a24d 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -51,13 +51,17 @@ Notes:
     be fixed to check for this situation and return an error.
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
+#include <linux/delay.h>
 #include <linux/gfp.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+
 #include <asm/dma.h>
+
 #include "comedi_fc.h"
 
 #define DEBUG
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index c255ed1ec231..e4748da1993b 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -50,6 +50,7 @@ AO commands are not supported.
 
 #define DEBUG 1
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 07aa828365e5..ffb7572b10f5 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -39,6 +39,7 @@ for my needs.
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 33398041b664..fd525f499f2a 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -33,6 +33,8 @@
  their cards in their manuals.
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index 77646371d80c..13f86d5cc957 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -18,6 +18,7 @@ Configuration options:
 
 #define DEBUG 0
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index f130327f88d3..cdcc8f42e209 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -42,6 +42,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index ee40233e81b3..3889d23292d0 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -42,6 +42,7 @@ There are 4 x 12-bit Analogue Outputs.  Ranges : 5V, 10V, +/-5V, +/-10V
 Configuration options: not applicable, uses PCI auto config
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 0d4de7d1094d..9c199a194d2b 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -77,6 +77,7 @@ options for PCI-20341M:
 	     3  200
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #define PCI20000_ID			0x1d
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index a9817c980fbc..b52d58e5de27 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -38,6 +38,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index f10cf10e5fe3..15589f62a619 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -29,6 +29,7 @@ This driver is a simple driver to read the counter values from
 Kolter Electronic PCI Counter Card.
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index f84f0fbb6eaa..1eda40a9332e 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -40,6 +40,7 @@ broken.
 
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 234332044310..e8a743c2f9a1 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -30,6 +30,7 @@
  *    Analog Input, Analog Output, Digital I/O
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index 12c34db61d63..35cb4ace7970 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -46,6 +46,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index f24657f304fd..bfdc2d36e651 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -51,6 +51,7 @@ Configuration Options:
 	1      -10.1V .. +10.1V
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 8db2aad5441e..088e3524e586 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -24,6 +24,7 @@ Devices: [Quanser Consulting] MultiQ-3 (multiq3)
 
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 2077d6ba6d3f..c2745f201f2c 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -36,6 +36,7 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
 #define DEBUG 1
 #define DEBUG_FLAGS
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 1bd830023118..3ba4c5712dff 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -46,6 +46,7 @@ except maybe the 6514.
 #define DEBUG 1
 #define DEBUG_FLAGS
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index d90d4a09ba4c..3607336dafe2 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -34,6 +34,7 @@
  * DAQ 6601/6602 User Manual (NI 322137B-01)
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index 4876f116ba92..02016258bd4e 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -36,6 +36,7 @@ Commands are not supported.
 
 */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 82c5ca686300..e13d5c83fb48 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -58,12 +58,15 @@ TRIG_WAKE_EOS
 
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
 #include <linux/io.h>
+
 #include <asm/dma.h>
 
 #include "8253.h"
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 639377a60c12..e19a7673ac3b 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -36,6 +36,7 @@ Configuration options:
  * document 320379.pdf.
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c
index 713edd55a91b..64f5dc7c5431 100644
--- a/drivers/staging/comedi/drivers/ni_atmio.c
+++ b/drivers/staging/comedi/drivers/ni_atmio.c
@@ -89,6 +89,7 @@ are not supported.
 
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index d91fbc8240c0..7b28fffa4913 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -30,6 +30,7 @@ Devices: [National Instruments] AT-MIO-16 (atmio16), AT-MIO-16D (atmio16d)
  *
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 12aa15b42887..c274a14216ea 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -45,6 +45,8 @@ Manuals:	Register level:	http://www.ni.com/pdf/manuals/340698.pdf
 		User Manual:	http://www.ni.com/pdf/manuals/320676d.pdf
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index d3d4eb9356a7..335ea34fa57c 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -31,6 +31,7 @@ This is just a wrapper around the 8255.o driver to properly handle
 the PCMCIA interface.
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <pcmcia/cistpl.h>
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 4119dcfd4761..3e95ac5402ca 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -57,6 +57,7 @@
  * 320502b (lab-pc+)
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/io.h>
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index df1de784e90b..0a8b3223f74e 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -53,6 +53,7 @@ NI manuals:
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/ni_labpc_pci.c b/drivers/staging/comedi/drivers/ni_labpc_pci.c
index 203a7cef7750..8be681fca907 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_pci.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_pci.c
@@ -29,6 +29,7 @@
  * 340914a (pci-1200)
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index f813f5763671..229a273f2016 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -36,6 +36,7 @@ See the notes in the ni_atmio.o driver.
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 3c5275b669fc..8ac7a7cce0e6 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -50,6 +50,7 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 /* #define DEBUG 1 */
 /* #define DEBUG_FLAGS */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 35681ba1f369..536be83af549 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -106,6 +106,7 @@ Bugs:
 
 */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index 5b6fde08e582..9b120c77d83a 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -44,6 +44,7 @@ TODO:
 	Support use of both banks X and Y
 */
 
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include "ni_tio_internal.h"
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index cff50bc45bcd..45691efefd05 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -44,6 +44,7 @@ TODO:
 	Support use of both banks X and Y
 */
 
+#include <linux/module.h>
 #include "comedi_fc.h"
 #include "ni_tio_internal.h"
 #include "mite.h"
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index f5ac58342a7c..6986837edef0 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -53,6 +53,7 @@ supported.
 
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index cea657c7801d..51fe1a2740e6 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -25,6 +25,7 @@
  *	   1,  96:  96 DIO configuration
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 9bd341fedced..e167ea6f6760 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -62,6 +62,7 @@ Interrupts are not supported.
     their web page.  (http://www.cir.com/)
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index 862e75fd68fd..6d23a9d0ddcb 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -27,6 +27,7 @@
  * The ACL-7130 card has an 8254 timer/counter not supported by this driver.
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 699d4558c122..c4f2f4e0a40f 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -108,6 +108,7 @@
  *	   3= 20V unipolar inputs
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/gfp.h>
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 02285976177a..dfce2a5599ce 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -32,6 +32,7 @@ Configuration Options:
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 55f10e754c76..48042967065d 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -98,6 +98,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
 
 */
 
+#include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/gfp.h>
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index 87cba62c6aed..31d398ca9ae1 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -28,6 +28,7 @@ Copy/pasted/hacked from pcm724.c
  *   struct comedi_insn
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index d5c728dc6192..423f23676d26 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -38,6 +38,7 @@
  *	   1 = two's complement (+-10V input range)
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #define PCMAD_STATUS		0
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 2839241bb35a..1c7a135c91d6 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -48,6 +48,7 @@
  *   [1] - Do Simultaneous Xfer (see description)
  */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 /* AI range is not configurable, it's set by jumpers on the board */
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index feb83caef26f..fab93a73651d 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -72,6 +72,7 @@ Configuration Options:
 	leave out if you don't need this feature)
 */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 30f53fb5a0ac..13f1943f5b8b 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -73,6 +73,7 @@
  *             can be the same as first irq!)
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index e50dd09a2031..3b51bef52ef6 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -30,6 +30,7 @@ Configuration options:
   [0] - I/O port base
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 478a97271a48..9775d3622a62 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -47,6 +47,7 @@ Status: works
 Devices: [Quatech] DAQP-208 (daqp), DAQP-308
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/semaphore.h>
 
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 928f534ae4ec..635c8f5cd8f6 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -95,6 +95,7 @@
  * Digital-IO and Analog-Out only support instruction mode.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index b95fce5d26fb..47a0abc88dbb 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -49,6 +49,8 @@
  *   [8] - DAC 1 encoding (same as DAC 0)
  */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index 664ad70b0501..116687ba21ae 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -32,6 +32,7 @@ Configuration Options:
     [17] - dac#7 ...
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 24d21eef74f8..0373a45ec4e7 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -36,6 +36,7 @@ comedi_config /dev/comedi0 s526 0x2C0,0x3
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
 #include <asm/byteorder.h>
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index f5ef91f39bbf..b0ba9b9b433b 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -59,6 +59,8 @@ INSN_CONFIG instructions:
    comedi_do_insn(cf,&insn); //executing configuration
 */
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index b6efe9b1d4d2..11a6da841454 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -26,6 +26,7 @@ Status: in development
 
 */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index 3fc7713af5ce..f76fd09e7bd3 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -67,6 +67,7 @@ Configuration Options:
  * options that are used with comedi_config.
  */
 
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 45c661cbdbb9..4da4d3208fdb 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -26,6 +26,7 @@ Status: unknown
 
 /* include files ----------------------------------------------------------- */
 
+#include <linux/module.h>
 #include "../comedidev.h"
 
 /* Some global definitions: the registers of the DNP ----------------------- */
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 806285bc6ca7..a4cb573233e3 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -40,6 +40,8 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5),
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/module.h>
+#include <linux/delay.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>