Merge branch 'dwmac-mediatek-add-more-support-for-RMII'

Biao Huang says:

====================
net-next: stmmac: dwmac-mediatek: add more support for RMII

changes in v2:
 PATCH 1/2 net-next: stmmac: mediatek: add more support for RMII
        As Andrew's comments, add the "rmii_internal" clock to the list of clocks.

 PATCH 2/2 net-next: dt-binding: dwmac-mediatek: add more description for RMII
        document the "rmii_internal" clock in dt-bindings
        rewrite the sample dts in dt-bindings.

v1:
This series is for support RMII when MT2712 SoC provides the reference clock.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 83 insertions, 39 deletions

diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
index 8a08621a5b54..afbcaebf062e 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
@@ -14,7 +14,7 @@ Required properties:
 	Should be "macirq" for the main MAC IRQ
 - clocks: Must contain a phandle for each entry in clock-names.
 - clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC
+	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
 - mac-address: See ethernet.txt in the same directory
 - phy-mode: See ethernet.txt in the same directory
 - mediatek,pericfg: A phandle to the syscon node that control ethernet
@@ -23,8 +23,10 @@ Required properties:
 Optional properties:
 - mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
 	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
 - mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII/RMII interface.
+	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface.
 Both delay properties need to be a multiple of 170 for RGMII interface,
 or will round down. Range 0~31*170.
 Both delay properties need to be a multiple of 550 for MII/RMII interface,
@@ -34,13 +36,20 @@ or will round down. Range 0~31*550.
 	reference clock, which is from external PHYs, is connected to RXC pin
 	on MT2712 SoC.
 	Otherwise, is connected to TXC pin.
+- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
+	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
 - mediatek,txc-inverse: boolean property, if present indicates that
 	1. tx clock will be inversed in MII/RGMII case,
 	2. tx clock inside MAC will be inversed relative to reference clock
 	   which is from external PHYs in RMII case, and it rarely happen.
+	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+	   when the reference clock is from MT2712 SoC.
 - mediatek,rxc-inverse: boolean property, if present indicates that
 	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case.
+	2. reference clock will be inversed when arrived at MAC in RMII case, when
+	   the reference clock is from external PHYs.
+	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+	   the reference clock is from MT2712 SoC.
 - assigned-clocks: mac_main and ptp_ref clocks
 - assigned-clock-parents: parent clocks of the assigned clocks
 
@@ -50,29 +59,33 @@ Example:
 		reg = <0 0x1101c000 0 0x1300>;
 		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "macirq";
-		phy-mode ="rgmii";
+		phy-mode ="rgmii-rxid";
 		mac-address = [00 55 7b b5 7d f7];
 		clock-names = "axi",
 			      "apb",
 			      "mac_main",
 			      "ptp_ref",
-			      "ptp_top";
+			      "rmii_internal";
 		clocks = <&pericfg CLK_PERI_GMAC>,
 			 <&pericfg CLK_PERI_GMAC_PCLK>,
 			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>;
+					 <&topckgen CLK_TOP_APLL1_D3>,
+					 <&topckgen CLK_TOP_ETHERPLL_50M>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
 		mediatek,pericfg = <&pericfg>;
 		mediatek,tx-delay-ps = <1530>;
 		mediatek,rx-delay-ps = <1530>;
 		mediatek,rmii-rxc;
 		mediatek,txc-inverse;
 		mediatek,rxc-inverse;
-		snps,txpbl = <32>;
-		snps,rxpbl = <32>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
 		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
 		snps,reset-active-low;
 	};
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index bdb80421acac..9e4b83832938 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -55,6 +55,8 @@ struct mediatek_dwmac_plat_data {
 	struct regmap *peri_regmap;
 	struct device *dev;
 	phy_interface_t phy_mode;
+	int num_clks_to_config;
+	bool rmii_clk_from_mac;
 	bool rmii_rxc;
 };
 
@@ -73,21 +75,33 @@ struct mediatek_dwmac_variant {
 
 /* list of clocks required for mac */
 static const char * const mt2712_dwmac_clk_l[] = {
-	"axi", "apb", "mac_main", "ptp_ref"
+	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal"
 };
 
 static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat)
 {
+	int rmii_clk_from_mac = plat->rmii_clk_from_mac ? RMII_CLK_SRC_INTERNAL : 0;
 	int rmii_rxc = plat->rmii_rxc ? RMII_CLK_SRC_RXC : 0;
 	u32 intf_val = 0;
 
+	/* The clock labeled as "rmii_internal" in mt2712_dwmac_clk_l is needed
+	 * only in RMII(when MAC provides the reference clock), and useless for
+	 * RGMII/MII/RMII(when PHY provides the reference clock).
+	 * num_clks_to_config indicates the real number of clocks should be
+	 * configured, equals to (plat->variant->num_clks - 1) in default for all the case,
+	 * then +1 for rmii_clk_from_mac case.
+	 */
+	plat->num_clks_to_config = plat->variant->num_clks - 1;
+
 	/* select phy interface in top control domain */
 	switch (plat->phy_mode) {
 	case PHY_INTERFACE_MODE_MII:
 		intf_val |= PHY_INTF_MII;
 		break;
 	case PHY_INTERFACE_MODE_RMII:
-		intf_val |= (PHY_INTF_RMII | rmii_rxc);
+		if (plat->rmii_clk_from_mac)
+			plat->num_clks_to_config++;
+		intf_val |= (PHY_INTF_RMII | rmii_rxc | rmii_clk_from_mac);
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
@@ -173,35 +187,50 @@ static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat)
 		delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
 		break;
 	case PHY_INTERFACE_MODE_RMII:
-		/* the rmii reference clock is from external phy,
-		 * and the property "rmii_rxc" indicates which pin(TXC/RXC)
-		 * the reference clk is connected to. The reference clock is a
-		 * received signal, so rx_delay/rx_inv are used to indicate
-		 * the reference clock timing adjustment
-		 */
-		if (plat->rmii_rxc) {
-			/* the rmii reference clock from outside is connected
-			 * to RXC pin, the reference clock will be adjusted
-			 * by RXC delay macro circuit.
-			 */
-			delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
-			delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay);
-			delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
-		} else {
-			/* the rmii reference clock from outside is connected
-			 * to TXC pin, the reference clock will be adjusted
-			 * by TXC delay macro circuit.
+		if (plat->rmii_clk_from_mac) {
+			/* case 1: mac provides the rmii reference clock,
+			 * and the clock output to TXC pin.
+			 * The egress timing can be adjusted by GTXC delay macro circuit.
+			 * The ingress timing can be adjusted by TXC delay macro circuit.
 			 */
 			delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay);
 			delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay);
 			delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv);
+
+			delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay);
+			delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay);
+			delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv);
+		} else {
+			/* case 2: the rmii reference clock is from external phy,
+			 * and the property "rmii_rxc" indicates which pin(TXC/RXC)
+			 * the reference clk is connected to. The reference clock is a
+			 * received signal, so rx_delay/rx_inv are used to indicate
+			 * the reference clock timing adjustment
+			 */
+			if (plat->rmii_rxc) {
+				/* the rmii reference clock from outside is connected
+				 * to RXC pin, the reference clock will be adjusted
+				 * by RXC delay macro circuit.
+				 */
+				delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay);
+				delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay);
+				delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv);
+			} else {
+				/* the rmii reference clock from outside is connected
+				 * to TXC pin, the reference clock will be adjusted
+				 * by TXC delay macro circuit.
+				 */
+				delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay);
+				delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay);
+				delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv);
+			}
+			/* tx_inv will inverse the tx clock inside mac relateive to
+			 * reference clock from external phy,
+			 * and this bit is located in the same register with fine-tune
+			 */
+			if (mac_delay->tx_inv)
+				fine_val = ETH_RMII_DLY_TX_INV;
 		}
-		/* tx_inv will inverse the tx clock inside mac relateive to
-		 * reference clock from external phy,
-		 * and this bit is located in the same register with fine-tune
-		 */
-		if (mac_delay->tx_inv)
-			fine_val = ETH_RMII_DLY_TX_INV;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
@@ -278,6 +307,7 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
 	mac_delay->tx_inv = of_property_read_bool(plat->np, "mediatek,txc-inverse");
 	mac_delay->rx_inv = of_property_read_bool(plat->np, "mediatek,rxc-inverse");
 	plat->rmii_rxc = of_property_read_bool(plat->np, "mediatek,rmii-rxc");
+	plat->rmii_clk_from_mac = of_property_read_bool(plat->np, "mediatek,rmii-clk-from-mac");
 
 	return 0;
 }
@@ -294,6 +324,8 @@ static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat)
 	for (i = 0; i < num; i++)
 		plat->clks[i].id = variant->clk_list[i];
 
+	plat->num_clks_to_config = variant->num_clks;
+
 	return devm_clk_bulk_get(plat->dev, num, plat->clks);
 }
 
@@ -321,7 +353,7 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
 		return ret;
 	}
 
-	ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
+	ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks);
 	if (ret) {
 		dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
 		return ret;
@@ -336,9 +368,8 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
 static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv)
 {
 	struct mediatek_dwmac_plat_data *plat = priv;
-	const struct mediatek_dwmac_variant *variant = plat->variant;
 
-	clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
+	clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);